When running a lot of large parallel queries concurrently, or a plan with
a lot of separate Gather nodes, it is possible to run out of DSM slots.
There are better solutions to these problems requiring architectural
redesign work, but for now, let's adjust the constants so that it's more
difficult to hit the limit.
1. Previously, a DSA area would create up to four segments at each size
before doubling the size. After this commit, it will create only two at
each size, so it ramps up faster and therefore needs fewer slots.
2. Previously, the total limit on DSM slots allowed for 2 per connection.
Switch to 5 per connection.
Also remove an obsolete nearby comment.
Author: Thomas Munro
Reviewed-by: Robert Haas, Andres Freund
Discussion: https://postre.es/m/CA%2BhUKGL6H2BpGbiF7Lj6QiTjTGyTLW_vLR%3DSn2tEBeTcYXiMKw%40mail.gmail.com
If no DSM slots are available, a ParallelContext can still be
created, but its seg pointer is NULL. Teach parallel btree build
to cope with that by falling back to a regular non-parallel build,
to avoid crashing with a segmentation fault.
Back-patch to 11, where parallel CREATE INDEX landed.
Reported-by: Nicola Contu
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/CA%2BhUKGJgJEBnkuODBVomyK3MWFvDBbMVj%3Dgdt6DnRPU-5sQ6UQ%40mail.gmail.com
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
Previously, TRUNCATE command through a parent table checked the
permissions on not only the parent table but also the children tables
inherited from it. This was a bug and inherited queries should perform
access permission checks on the parent table only. This commit fixes
that bug.
Back-patch to all supported branches.
Author: Amit Langote
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAHGQGwFHdSvifhJE+-GSNqUHSfbiKxaeQQ7HGcYz6SC2n_oDcg@mail.gmail.com
Advancing a physical replication slot with pg_replication_slot_advance()
did not mark the slot as dirty if any advancing was done, preventing the
follow-up checkpoint to flush the slot data to disk. This caused the
advancing to be lost even on clean restarts. This does not happen for
logical slots as any advancing marked the slot as dirty. Per
discussion, the original feature has been implemented so as in the event
of a crash the slot may move backwards to a past LSN. This property is
kept and more documentation is added about that.
This commit adds some new TAP tests to check the persistency of physical
and logical slots after advancing across clean restarts.
Author: Alexey Kondratov, Michael Paquier
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Craig Ringer
Discussion: https://postgr.es/m/059cc53a-8b14-653a-a24d-5f867503b0ee@postgrespro.ru
Backpatch-through: 11
As of commit 50fc694e4, the plperl tests don't want preinstalled
plperl languages; they now install those themselves. I'd removed the
--load-extension options from the GNUmakefile, but missed teaching
the MSVC build script about that.
Per buildfarm.
This patch creates a new extension property, "trusted". An extension
that's marked that way in its control file can be installed by a
non-superuser who has the CREATE privilege on the current database,
even if the extension contains objects that normally would have to be
created by a superuser. The objects within the extension will (by
default) be owned by the bootstrap superuser, but the extension itself
will be owned by the calling user. This allows replicating the old
behavior around trusted procedural languages, without all the
special-case logic in CREATE LANGUAGE. We have, however, chosen to
loosen the rules slightly: formerly, only a database owner could take
advantage of the special case that allowed installation of a trusted
language, but now anyone who has CREATE privilege can do so.
Having done that, we can delete the pg_pltemplate catalog, moving the
knowledge it contained into the extension script files for the various
PLs. This ends up being no change at all for the in-core PLs, but it is
a large step forward for external PLs: they can now have the same ease
of installation as core PLs do. The old "trusted PL" behavior was only
available to PLs that had entries in pg_pltemplate, but now any
extension can be marked trusted if appropriate.
This also removes one of the stumbling blocks for our Python 2 -> 3
migration, since the association of "plpythonu" with Python 2 is no
longer hard-wired into pg_pltemplate's initial contents. Exactly where
we go from here on that front remains to be settled, but one problem
is fixed.
Patch by me, reviewed by Peter Eisentraut, Stephen Frost, and others.
Discussion: https://postgr.es/m/5889.1566415762@sss.pgh.pa.us
Copy the rules that src/test/regress/GNUmakefile uses for this purpose.
Since these files are .gitignore'd, the mistake wasn't obvious unless
you happened to look at "git status --ignored" in an allegedly clean
tree.
Oversight in commit 1858b105b. No need for back-patch since that's
not in the back branches.
To make this work, (1) makeJsonLexContextCstringLen now takes the
encoding to be used as an argument; (2) check_stack_depth() is made to
do nothing in frontend code, and (3) elog(ERROR, ...) is changed to
pg_log_fatal + exit in frontend code.
Mark Dilger, reviewed and slightly revised by me.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
Before, if a recovery target is configured, but the archive ended
before the target was reached, recovery would end and the server would
promote without further notice. That was deemed to be pretty wrong.
With this change, if the recovery target is not reached, it is a fatal
error.
Based-on-patch-by: Leif Gunnar Erlandsen <leif@lako.no>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/993736dd3f1713ec1f63fc3b653839f5@lako.no
channel_binding's longest allowed value is not "7", it is actually "8".
gssencmode also got that wrong.
A similar mistake has been fixed as of f4051e3.
Backpatch down to v12, where gssencmode has been introduced.
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20200128053633.GD1552@paquier.xyz
Backpatch-through: 12
Commit 40d964ec99 allowed vacuum command to leverage multiple CPUs by
invoking parallel workers to process indexes. This commit provides a
'--parallel' option to specify the parallel degree used by vacuum command.
Author: Masahiko Sawada, with few modifications by me
Reviewed-by: Mahendra Singh and Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.com
EvalPlanQualStart() supposed that it could re-use the relsubs_rowmark
and relsubs_done arrays from a prior instantiation. But since they are
allocated in the es_query_cxt of the recheckestate, that's just wrong;
EvalPlanQualEnd() will blow away that storage. Therefore we were using
storage that could have been reallocated to something else, causing all
sorts of havoc.
I think this was modeled on the old code's handling of es_epqTupleSlot,
but since the code was anyway clearing the arrays at re-use, there's
clearly no expectation of importing any outside state. So it's just
a dubious savings of a couple of pallocs, which is negligible compared
to setting up a new planstate tree. Therefore, just allocate the
arrays always. (I moved the allocations slightly for readability.)
In principle this bug could cause a problem whenever EPQ rechecks are
needed in more than one target table of a ModifyTable plan node.
In practice it seems not quite so easy to trigger as that; I couldn't
readily duplicate a crash with a partitioned target table, for instance.
That's probably down to incidental choices about when to free or
reallocate stuff. The added isolation test case does seem to reliably
show an assertion failure, though.
Per report from Oleksii Kliukin. Back-patch to v12 where the bug was
introduced (evidently by commit 3fb307bc4).
Discussion: https://postgr.es/m/EEF05F66-2871-4786-992B-5F45C92FEE2E@hintbits.com
It's not OK to do that without calling CHECK_FOR_INTERRUPTS().
Let the next wait loop deal with it, following the usual pattern.
One consequence of this bug was that a SIGTERM delivered in a very
narrow timing window could leave a parallel worker process waiting
forever for a condition variable that will never be signaled, after
an error was raised in other process.
The code is a bit different in the stable branches due to commit
1321509f, making problems less likely there. No back-patch for now,
but we may finish up deciding to make a similar change after more
discussion.
Author: Thomas Munro
Reviewed-by: Shawn Debnath
Reported-by: Tomas Vondra
Discussion: https://postgr.es/m/CA%2BhUKGJOm8zZHjVA8svoNT3tHY0XdqmaC_kHitmgXDQM49m1dA%40mail.gmail.com
This gives more information to the user about the error and it makes such
messages consistent with the other similar messages in the code.
Reported-by: Simon Riggs
Author: Mahendra Singh and Simon Riggs
Reviewed-by: Beena Emerson and Amit Kapila
Discussion: https://postgr.es/m/CANP8+j+7YUvQvGxTrCiw77R23enMJ7DFmyA3buR+fa2pKs4XhA@mail.gmail.com
These two new parameters, named sslminprotocolversion and
sslmaxprotocolversion, allow to respectively control the minimum and the
maximum version of the SSL protocol used for the SSL connection attempt.
The default setting is to allow any version for both the minimum and the
maximum bounds, causing libpq to rely on the bounds set by the backend
when negotiating the protocol to use for an SSL connection. The bounds
are checked when the values are set at the earliest stage possible as
this makes the checks independent of any SSL implementation.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier, Cary Huang
Discussion: https://postgr.es/m/4F246AE3-A7AE-471E-BD3D-C799D3748E03@yesql.se
The following changes make the predicate locking functions more
generic and suitable for use by future access methods:
- PredicateLockTuple() is renamed to PredicateLockTID(). It takes
ItemPointer and inserting transaction ID instead of HeapTuple.
- CheckForSerializableConflictIn() takes blocknum instead of buffer.
- CheckForSerializableConflictOut() no longer takes HeapTuple or buffer.
Author: Ashwin Agrawal
Reviewed-by: Andres Freund, Kuntal Ghosh, Thomas Munro
Discussion: https://postgr.es/m/CALfoeiv0k3hkEb3Oqk%3DziWqtyk2Jys1UOK5hwRBNeANT_yX%2Bng%40mail.gmail.com
In the wake of 1f3a02173, assorted buildfarm members were warning about
"control reaches end of non-void function" or the like. Do what we've
done elsewhere: in place of a "default" switch case that will prevent
the compiler from warning about unhandled enum values, put a catchall
elog() after the switch. And return a dummy value to satisfy compilers
that don't know elog() doesn't return.
Specifically, move those functions that depend on ereport()
from jsonapi.c to jsonfuncs.c, in preparation for allowing
jsonapi.c to be used from frontend code.
A few cases where elog(ERROR, ...) is used for can't-happen
conditions are left alone; we can handle those in some other
way in frontend code.
Reviewed by Mark Dilger and Andrew Dunstan.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
Instead, it now returns a value indicating either success or the
type of error which occurred. The old behavior is still available
by calling pg_parse_json_or_ereport(). If the new interface is
used, an error can be thrown by passing the return value of
pg_parse_json() to json_ereport_error().
pg_parse_json() can still elog() in can't-happen cases, but it
seems like that issue is best handled separately.
Adjust json_lex() and json_count_array_elements() to return an
error code, too.
This is all in preparation for making the backend's json parser
available to frontend code.
Reviewed and/or tested by Mark Dilger and Andrew Dunstan.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
Currently, Parallel Hash Join cannot be used for full/right joins,
so there is no point in setting the match flag. It turns out that
the cache coherence traffic generated by those writes slows down
large systems running many-core joins, so let's stop doing that.
In future, if we need to use match bits in parallel joins, we might
want to consider setting them only if not already set.
Back-patch to 11, where Parallel Hash Join arrived.
Reported-by: Deng, Gang
Discussion: https://postgr.es/m/0F44E799048C4849BAE4B91012DB910462E9897A%40SHSMSX103.ccr.corp.intel.com
The leaks have been detected by a Coverity run on Windows. No backpatch
is done as the leaks are minor.
While on it, make restricted token creation more consistent in its error
handling by logging an error instead of a warning if missing
advapi32.dll, which was missing in the NT4 days. Any modern platform
should have this DLL around. Now, if the library is not there, an error
is still reported back to the caller, and nothing is done do there is no
behavior change done in this commit.
Author: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQApa9MG0foPkgPX87fipk=vhnF2Xfg+CfUyR08h4R7Mywg@mail.gmail.com
In non-TEXT output formats, the "Settings" field should appear when
requested, even if it would be empty.
Also, get rid of the premature optimization of counting all the
GUC_EXPLAIN variables at startup. Since there was no provision for
adjusting that count later, all it'd take would be some extension marking
a parameter as GUC_EXPLAIN to risk an assertion failure or memory stomp.
We could make get_explain_guc_options() count those variables on-the-fly,
or dynamically resize its array ... but TBH I do not think that making a
transient array of pointers a bit smaller is worth any extra complication,
especially when you consider all the other transient space EXPLAIN eats.
So just allocate that array at the max possible size.
In HEAD, also add some regression test coverage for this feature.
Because of the memory-stomp hazard, back-patch to v12 where this
feature was added.
Discussion: https://postgr.es/m/19416.1580069629@sss.pgh.pa.us
The signature of XLogReadRecord() required the caller to pass the starting
WAL position as argument, or InvalidXLogRecPtr to continue reading at the
end of previous record. That's slightly awkward to the callers, as most
of them don't want to randomly jump around in the WAL stream, but start
reading at one position and then read everything from that point onwards.
Remove the 'RecPtr' argument and add a new function XLogBeginRead() to
specify the starting position instead. That's more convenient for the
callers. Also, xlogreader holds state that is reset when you change the
starting position, so having a separate function for doing that feels like
a more natural fit.
This changes XLogFindNextRecord() function so that it doesn't reset the
xlogreader's state to what it was before the call anymore. Instead, it
positions the xlogreader to the found record, like XLogBeginRead().
Reviewed-by: Kyotaro Horiguchi, Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/5382a7a3-debe-be31-c860-cb810c08f366%40iki.fi
Previously, it was possible for EXPLAIN ANALYZE of a parallel query
to produce several different "Workers" fields for a single plan node,
because different portions of explain.c independently generated
per-worker data and wrapped that output in separate fields. This
is pretty bogus, especially for the structured output formats: even
if it's not technically illegal, most programs would have a hard time
dealing with such data.
To improve matters, add infrastructure that allows redirecting
per-worker values into a side data structure, and then collect that
data into a single "Workers" field after we've finished running all
the relevant code for a given plan node.
There are a few visible side-effects:
* In text format, instead of something like
Sort Method: external merge Disk: 4920kB
Worker 0: Sort Method: external merge Disk: 5880kB
Worker 1: Sort Method: external merge Disk: 5920kB
Buffers: shared hit=682 read=10188, temp read=1415 written=2101
Worker 0: actual time=130.058..130.324 rows=1324 loops=1
Buffers: shared hit=337 read=3489, temp read=505 written=739
Worker 1: actual time=130.273..130.512 rows=1297 loops=1
Buffers: shared hit=345 read=3507, temp read=505 written=744
you get
Sort Method: external merge Disk: 4920kB
Buffers: shared hit=682 read=10188, temp read=1415 written=2101
Worker 0: actual time=130.058..130.324 rows=1324 loops=1
Sort Method: external merge Disk: 5880kB
Buffers: shared hit=337 read=3489, temp read=505 written=739
Worker 1: actual time=130.273..130.512 rows=1297 loops=1
Sort Method: external merge Disk: 5920kB
Buffers: shared hit=345 read=3507, temp read=505 written=744
* When JIT is enabled, any relevant per-worker JIT stats are attached
to the child node of the Gather or Gather Merge node, which is where
the other per-worker output has always been. Previously, that info
was attached directly to a Gather node, or missed entirely for Gather
Merge.
* A query's summary JIT data no longer includes a bogus
"Worker Number: -1" field.
A notable code-level change is that indenting for lines of text-format
output should now be handled by calling "ExplainIndentText(es)",
instead of hard-wiring how much space to emit. This seems a good deal
cleaner anyway.
This patch also adds a new "explain.sql" regression test script that's
dedicated to testing EXPLAIN. There is more that can be done in that
line, certainly, but for now it just adds some coverage of the XML and
YAML output formats, which had been completely untested.
Although this is surely a bug fix, it's not clear that people would
be happy with rearranging EXPLAIN output in a minor release, so apply
to HEAD only.
Maciek Sakrejda and Tom Lane, based on an idea of Andres Freund's;
reviewed by Georgios Kokolatos
Discussion: https://postgr.es/m/CAOtHd0AvAA8CLB9Xz0wnxu1U=zJCKrr1r4QwwXi_kcQsHDVU=Q@mail.gmail.com
At first glance, this function seems useful, but it actually increases
the amount of code required rather than decreasing it. Inline the
logic into the callers instead; most callers don't use the 'lexeme'
argument for anything and as a result considerable simplification is
possible.
Along the way, fix the header comment for the nearby function
lex_expect(), which mislabeled it as lex_accept().
Patch by me, reviewed by David Steele, Mark Dilger, and Andrew
Dunstan.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
Keep the code that pertains to the 'json' data type in json.c, but
move the lexing and parsing code to a new file jsonapi.c, a name
I chose because the corresponding prototypes are in jsonapi.h.
This seems like a logical division, because the JSON lexer and parser
are also used by the 'jsonb' data type, but the SQL-callable functions
in json.c are a separate thing. Also, the new jsonapi.c file needs to
include far fewer header files than json.c, which seems like a good
sign that this is an appropriate place to insert an abstraction
boundary. I took the opportunity to remove a few apparently-unneeded
includes from json.c at the same time.
Patch by me, reviewed by David Steele, Mark Dilger, and Andrew
Dunstan. The previous commit was, too, but I forgot to note it
in the commit message.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
The major change here is that we no longer include jsonb.h into
jsonapi.h. The reason that was necessary is that jsonapi.h included
several prototypes functions in jsonfuncs.c that depend on the Jsonb
type. Move those prototypes to a new header, jsonfuncs.h, and include
it where needed.
The other change is that JsonEncodeDateTime is now declared in
json.h rather than jsonapi.h.
Taken together, these steps eliminate all dependencies of jsonapi.h
on backend-only data types and header files, so that it can
potentially be included in frontend code.
This function allows us to fsync the specified file or directory.
It's useful, for example, when we want to sync the file that
pg_file_write() writes out or that COPY TO exports the data into,
for durability.
Author: Fujii Masao
Reviewed-By: Julien Rouhaud, Arthur Zakirov, Michael Paquier, Atsushi Torikoshi
Discussion: https://www.postgresql.org/message-id/CAHGQGwGY8uzZ_k8dHRoW1zDcy1Z7=5GQ+So4ZkVy2u=nLsk=hA@mail.gmail.com
src/include/common/unicode_combining_table.h is currently not meant to
be included standalone. Things could be refactored to allow it, but
that would be beyond the present purpose. So adding an exclusion here
seems best.
Discussion: https://www.postgresql.org/message-id/10754.1579535012@sss.pgh.pa.us
I had supposed that all versions of Readline that have filename
quoting hooks also have the rl_completion_suppress_quote variable.
But it seems OpenBSD managed to find a version someplace that does
not, so we'll have to expend a separate configure probe for that.
(Light testing suggests that this version also lacks the bugs that
make it necessary to frob that variable. Hooray!)
Per buildfarm.
I had supposed that the from_char_seq_search() call sites were
all passing the constant arrays you'd expect them to pass ...
but on looking closer, the one for DY format was passing the
days[] array not days_short[]. This accidentally worked because
the day abbreviations in English are all the same as the first
three letters of the full day names. However, once we took out
the "maximum comparison length" logic, it stopped working.
As penance for that oversight, add regression test cases covering
this, as well as every other switch case in DCH_from_char() that
was not reached according to the code coverage report.
Also, fold the DCH_RM and DCH_rm cases into one --- now that
seq_search is case independent, there's no need to pass different
comparison arrays for those cases.
Back-patch, as the previous commit was.
seq_search(), which is used to match input substrings to constants
such as month and day names, had a lot of bizarre and unnecessary
behaviors. It was mostly possible to avert our eyes from that before,
but we don't want to duplicate those behaviors in the upcoming patch
to allow recognition of non-English month and day names. So it's time
to clean this up. In particular:
* seq_search scribbled on the input string, which is a pretty dangerous
thing to do, especially in the badly underdocumented way it was done here.
Fortunately the input string is a temporary copy, but that was being made
three subroutine levels away, making it something easy to break
accidentally. The behavior is externally visible nonetheless, in the form
of odd case-folding in error reports about unrecognized month/day names.
The scribbling is evidently being done to save a few calls to pg_tolower,
but that's such a cheap function (at least for ASCII data) that it's
pretty pointless to worry about. In HEAD I switched it to be
pg_ascii_tolower to ensure it is cheap in all cases; but there are corner
cases in Turkish where this'd change behavior, so leave it as pg_tolower
in the back branches.
* seq_search insisted on knowing the case form (all-upper, all-lower,
or initcap) of the constant strings, so that it didn't have to case-fold
them to perform case-insensitive comparisons. This likewise seems like
excessive micro-optimization, given that pg_tolower is certainly very
cheap for ASCII data. It seems unsafe to assume that we know the case
form that will come out of pg_locale.c for localized month/day names, so
it's better just to define the comparison rule as "downcase all strings
before comparing". (The choice between downcasing and upcasing is
arbitrary so far as English is concerned, but it might not be in other
locales, so follow citext's lead here.)
* seq_search also had a parameter that'd cause it to report a match
after a maximum number of characters, even if the constant string were
longer than that. This was not actually used because no caller passed
a value small enough to cut off a comparison. Replicating that behavior
for localized month/day names seems expensive as well as useless, so
let's get rid of that too.
* from_char_seq_search used the maximum-length parameter to truncate
the input string in error reports about not finding a matching name.
This leads to rather confusing reports in many cases. Worse, it is
outright dangerous if the input string isn't all-ASCII, because we
risk truncating the string in the middle of a multibyte character.
That'd lead either to delivering an illegible error message to the
client, or to encoding-conversion failures that obscure the actual
data problem. Get rid of that in favor of truncating at whitespace
if any (a suggestion due to Alvaro Herrera).
In addition to fixing these things, I const-ified the input string
pointers of DCH_from_char and its subroutines, to make sure there
aren't any other scribbling-on-input problems.
The risk of generating a badly-encoded error message seems like
enough of a bug to justify back-patching, so patch all supported
branches.
Discussion: https://postgr.es/m/29432.1579731087@sss.pgh.pa.us
The Readline library contains a fair amount of knowledge about how to
tab-complete filenames, but it turns out that that doesn't work too well
unless we follow its expectation that we use its filename quoting hooks
to quote and de-quote filenames. We were trying to do such quote handling
within complete_from_files(), and that's still what we have to do if we're
using libedit, which lacks those hooks. But for Readline, it works a lot
better if we tell Readline that single-quote is a quoting character and
then provide hooks that know the details of the quoting rules for SQL
and psql meta-commands.
Hence, resurrect the quoting hook functions that existed in the original
version of tab-complete.c (and were disabled by commit f6689a328 because
they "didn't work so well yet"), and whack on them until they do seem to
work well.
Notably, this fixes bug #16059 from Steven Winfield, who pointed out
that the previous coding would strip quote marks from filenames in SQL
COPY commands, even though they're syntactically necessary there.
Now, we not only don't do that, but we'll add a quote mark when you
tab-complete, even if you didn't type one.
Getting this to work across a range of libedit versions (and, to a
lesser extent, libreadline versions) was depressingly difficult.
It will be interesting to see whether the new regression test cases
pass everywhere in the buildfarm.
Some future patch might try to handle quoted SQL identifiers with
similar explicit quoting/dequoting logic, but that's for another day.
Patch by me, reviewed by Peter Eisentraut.
Discussion: https://postgr.es/m/16059-8836946734c02b84@postgresql.org
This test case was sketched in commit message 4c87010981 to explain an
ancient bug; it translates to a coverage increase, so add it to the BRIN
regression tests.
Detection of WAL records having references to invalid pages
during recovery causes PostgreSQL to raise a PANIC-level error,
aborting the recovery. Setting ignore_invalid_pages to on causes
the system to ignore those WAL records (but still report a warning),
and continue recovery. This behavior may cause crashes, data loss,
propagate or hide corruption, or other serious problems.
However, it may allow you to get past the PANIC-level error,
to finish the recovery, and to cause the server to start up.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAHGQGwHCK6f77yeZD4MHOnN+PaTf6XiJfEB+Ce7SksSHjeAWtg@mail.gmail.com
In commit 40d964ec99, we changed the way memory is allocated for dead
tuples but forgot to update the place where we compute the maximum
number of dead tuples. This could lead to invalid memory requests.
Reported-by: Andres Freund
Diagnosed-by: Andres Freund
Author: Masahiko Sawada
Reviewed-by: Amit Kapila and Dilip Kumar
Discussion: https://postgr.es/m/20200121060020.e3cr7s7fj5rw4lok@alap3.anarazel.de
Attempting to use CREATE INDEX, DROP INDEX or REINDEX with CONCURRENTLY
on a temporary relation with ON COMMIT actions triggered unexpected
errors because those operations use multiple transactions internally to
complete their work. Here is for example one confusing error when using
ON COMMIT DELETE ROWS:
ERROR: index "foo" already contains data
Issues related to temporary relations and concurrent indexing are fixed
in this commit by enforcing the non-concurrent path to be taken for
temporary relations even if using CONCURRENTLY, transparently to the
user. Using a non-concurrent path does not matter in practice as locks
cannot be taken on a temporary relation by a session different than the
one owning the relation, and the non-concurrent operation is more
effective.
The problem exists with REINDEX since v12 with the introduction of
CONCURRENTLY, and with CREATE/DROP INDEX since CONCURRENTLY exists for
those commands. In all supported versions, this caused only confusing
error messages to be generated. Note that with REINDEX, it was also
possible to issue a REINDEX CONCURRENTLY for a temporary relation owned
by a different session, leading to a server crash.
The idea to enforce transparently the non-concurrent code path for
temporary relations comes originally from Andres Freund.
Reported-by: Manuel Rigger
Author: Michael Paquier, Heikki Linnakangas
Reviewed-by: Andres Freund, Álvaro Herrera, Heikki Linnakangas
Discussion: https://postgr.es/m/CA+u7OA6gP7YAeCguyseusYcc=uR8+ypjCcgDDCTzjQ+k6S9ksQ@mail.gmail.com
Backpatch-through: 9.4
The behavior of something like
ALTER TABLE transactions
ADD COLUMN status varchar(30) DEFAULT 'old',
ALTER COLUMN status SET default 'current';
is to fill existing table rows with 'old', not 'current'. That's
intentional and desirable for a couple of reasons:
* It makes the behavior the same whether you merge the sub-commands
into one ALTER command or give them separately;
* If we applied the new default while filling the table, there would
be no way to get the existing behavior in one SQL command.
The same reasoning applies in cases that add a column and then
manipulate its GENERATED/IDENTITY status in a second sub-command,
since the generation expression is really just a kind of default.
However, that wasn't very obvious (at least not to me; earlier in
the referenced discussion thread I'd thought it was a bug to be
fixed). And it certainly wasn't documented.
Hence, add documentation, code comments, and a test case to clarify
that this behavior is all intentional.
In passing, adjust ATExecAddColumn's defaults-related relkind check
so that it matches up exactly with ATRewriteTables, instead of being
effectively (though not literally) the negated inverse condition.
The reasoning can be explained a lot more concisely that way, too
(not to mention that the comment now matches the code, which it
did not before).
Discussion: https://postgr.es/m/10365.1558909428@sss.pgh.pa.us
The code checking whether an aggregate transition value needs to be
reparented into the current context has always only compared the
transition return value with the previous transition value by datum,
i.e. without regard for NULLness. This normally works, because when
the transition function returns NULL (via fcinfo->isnull), it'll
return a value that won't be the same as its input value.
But there's no hard requirement that that's the case. And it turns
out, it's possible to hit this case (see discussion or reproducers),
leading to a non-null transition value not being reparented, followed
by a crash caused by that.
Instead of adding another comparison of NULLness, instead have
ExecAggTransReparent() ensure that pergroup->transValue ends up as 0
when the new transition value is NULL. That avoids having to add an
additional branch to the much more common cases of the transition
function returning the old transition value (which is a pointer in
this case), and when the new value is different, but not NULL.
In branches since 69c3936a14, also deduplicate the reparenting code
between the expression evaluation based transitions, and the path for
ordered aggregates.
Reported-By: Teodor Sigaev, Nikita Glukhov
Author: Andres Freund
Discussion: https://postgr.es/m/bd34e930-cfec-ea9b-3827-a8bc50891393@sigaev.ru
Backpatch: 9.4-, this issue has existed since at least 7.4
This helps integration of extensions with Windows. The following
parameters are changed:
- idle_in_transaction_session_timeout (9.6 and newer versions)
- lock_timeout
- statement_timeout
- track_activities
- track_counts
- track_functions
Author: Pascal Legrand
Reviewed-by: Amit Kamila, Julien Rouhaud, Michael Paquier
Discussion: https://postgr.es/m/1579298868581-0.post@n3.nabble.com
Backpatch-through: 9.4
Some buildfarm members were still warning about this, because in
9c679a08f I'd missed decorating one of the ereport() code paths
with a dummy return.
Also, adjust the error messages to be more in line with project
style guide.
sigTermHandler() tried to be careful to invoke only operations that
are safe to do in a signal handler. But for some reason we forgot
that exit(3) is not among those, because it calls atexit handlers
that might do various random things. (pg_dump itself installs no
atexit handlers, but e.g. OpenSSL does.) That led to crashes or
lockups when attempting to terminate a parallel dump or restore
via a signal.
Fix by calling _exit() instead.
Per bug #16199 from Raúl Marín. Back-patch to all supported branches.
Discussion: https://postgr.es/m/16199-cb2f121146a96f9b@postgresql.org
The BRIN add_value() and union() functions need to make a longer-lived
copy of the argument, if they want to store it in the BrinValues struct
also passed as argument. The functions for the "inclusion operator
classes" used with box, range and inet types didn't take into account
that the union helper function might return its argument as is, without
making a copy. Check for that case, and make a copy if necessary. That
case arises at least with the range_union() function, when one of the
arguments is an 'empty' range:
CREATE TABLE brintest (n numrange);
CREATE INDEX brinidx ON brintest USING brin (n);
INSERT INTO brintest VALUES ('empty');
INSERT INTO brintest VALUES (numrange(0, 2^1000::numeric));
INSERT INTO brintest VALUES ('(-1, 0)');
SELECT brin_desummarize_range('brinidx', 0);
SELECT brin_summarize_range('brinidx', 0);
Backpatch down to 9.5, where BRIN was introduced.
Discussion: https://www.postgresql.org/message-id/e6e1d6eb-0a67-36aa-e779-bcca59167c14%40iki.fi
Reviewed-by: Emre Hasegeli, Tom Lane, Alvaro Herrera
This feature allows the vacuum to leverage multiple CPUs in order to
process indexes. This enables us to perform index vacuuming and index
cleanup with background workers. This adds a PARALLEL option to VACUUM
command where the user can specify the number of workers that can be used
to perform the command which is limited by the number of indexes on a
table. Specifying zero as a number of workers will disable parallelism.
This option can't be used with the FULL option.
Each index is processed by at most one vacuum process. Therefore parallel
vacuum can be used when the table has at least two indexes.
The parallel degree is either specified by the user or determined based on
the number of indexes that the table has, and further limited by
max_parallel_maintenance_workers. The index can participate in parallel
vacuum iff it's size is greater than min_parallel_index_scan_size.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Robert Haas, Tomas Vondra,
Mahendra Singh and Sergei Kornilov
Tested-by: Mahendra Singh and Prabhat Sahu
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1J-VoR9gzS5E75pcD-OH0mEyCdp8RihcwKrcuw7J-Q0+w@mail.gmail.com
ecpg_build_params() would crash on a null pointer dereference if
realloc() failed, due to updating the persistent "stmt" struct
too aggressively. (Even without the crash, this would've leaked
the old storage that we were trying to realloc.)
Per Coverity. This seems to have been broken in commit 0cc050794,
so back-patch into v12.
Ensure that ClassifyUtilityCommandAsReadOnly() has defined behavior
even if TransactionStmt.kind has a value that's not one of the
declared values for its enum.
Suppress warnings from compilers that don't know that elog(ERROR)
doesn't return, in ClassifyUtilityCommandAsReadOnly() and
jsonb_set_lax().
Per Coverity and buildfarm.
This data was only in separate files because it was the most convenient
way to handle it with a shell script. Now that we use a general-purpose
programming language, it's easy to assemble the data into the same format
as the rest of the catalogs and output it into postgres.bki. This allows
removal of some special-purpose code from initdb.c.
Discussion: https://www.postgresql.org/message-id/CACPNZCtVFtjHre6hg9dput0qRPp39pzuyA2A6BT8wdgrRy%2BQdA%40mail.gmail.com
Author: John Naylor
Mixing incorrect bounds set in the SSL context leads to confusing error
messages generated by OpenSSL which are hard to act on. New checks are
added within the GUC machinery to improve the user experience as they
apply to any SSL implementation, not only OpenSSL, and doing the checks
beforehand avoids the creation of a SSL during a reload (or startup)
which we know will never be used anyway.
Backpatch down to 12, as those parameters have been introduced by
e73e67c.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20200114035420.GE1515@paquier.xyz
Backpatch-through: 12
The strategy of GIN index scan is driven by opclass-specific extract_query
method. This method that needed search mode is GIN_SEARCH_MODE_ALL. This
mode means that matching tuple may contain none of extracted entries. Simple
example is '!term' tsquery, which doesn't need any term to exist in matching
tsvector.
In order to handle such scan key GIN calculates virtual entry, which contains
all TIDs of all entries of attribute. In fact this is full scan of index
attribute. And typically this is very slow, but allows to handle some queries
correctly in GIN. However, current algorithm calculate such virtual entry for
each GIN_SEARCH_MODE_ALL scan key even if they are multiple for the same
attribute. This is clearly not optimal.
This commit improves the situation by introduction of "exclude only" scan keys.
Such scan keys are not capable to return set of matching TIDs. Instead, they
are capable only to filter TIDs produced by normal scan keys. Therefore,
each attribute should contain at least one normal scan key, while rest of them
may be "exclude only" if search mode is GIN_SEARCH_MODE_ALL.
The same optimization might be applied to the whole scan, not per-attribute.
But that leads to NULL values elimination problem. There is trade-off between
multiple possible ways to do this. We probably want to do this later using
some cost-based decision algorithm.
Discussion: https://postgr.es/m/CAOBaU_YGP5-BEt5Cc0%3DzMve92vocPzD%2BXiZgiZs1kjY0cj%3DXBg%40mail.gmail.com
Author: Nikita Glukhov, Alexander Korotkov, Tom Lane, Julien Rouhaud
Reviewed-by: Julien Rouhaud, Tomas Vondra, Tom Lane
Commit 9b63c13f0 turns out to have been fundamentally misguided:
the parent node's subPlan list is by no means the only way in which
a child SubPlan node can be hooked into the outer execution state.
As shown in bug #16213 from Matt Jibson, we can also get short-lived
tuple table slots added to the outer es_tupleTable list. At this point
I have little faith that there aren't other possible connections as
well; the long time it took to notice this problem shows that this
isn't a heavily-exercised situation.
Therefore, revert that fix, returning to the coding that passed a
NULL parent plan pointer down to the transiently-built subexpressions.
That gives us a pretty good guarantee that they won't hook into the
outer executor state in any way. But then we need some other solution
to make SubPlans work. Adopt the solution speculated about in the
previous commit's log message: do expression initialization at plan
startup for just those VALUES rows containing SubPlans, abandoning the
goal of reclaiming memory intra-query for those rows. In practice it
seems unlikely that queries containing a vast number of VALUES rows
would be using SubPlans in them, so this should not give up much.
(BTW, this test case also refutes my claim in connection with the prior
commit that the issue only arises with use of LATERAL. That was just
wrong: some variants of SubLink always produce SubPlans.)
As with previous patch, back-patch to all supported branches.
Discussion: https://postgr.es/m/16213-871ac3bc208ecf23@postgresql.org
... specifically, set it incrementally as each individual change is
spilled down to disk. This way, it is set correctly when the
transaction disappears without trace, ie. without leaving an XACT_ABORT
wal record. (This happens when the server crashes midway through a
transaction.)
Failing to have final_lsn prevents ReorderBufferRestoreCleanup() from
working, since it needs the final_lsn in order to know the endpoint of
its iteration through spilled files.
Commit df9f682c7b already tried to fix the problem, but it didn't set
the final_lsn in all cases. Revert that, since it's no longer needed.
Author: Vignesh C
Reviewed-by: Amit Kapila, Dilip Kumar
Discussion: https://postgr.es/m/CALDaNm2CLk+K9JDwjYST0sPbGg5AQdvhUt0jbKyX_HdAE0jk3A@mail.gmail.com
The bitmap used by SlabCheck to cross-check free chunks in a block used
to be allocated for each SlabCheck call, and was never freed. The memory
leak could be fixed by simply adding a pfree call, but it's actually a
bad idea to do any allocations in SlabCheck at all as it assumes the
state of the memory management as a whole is sane.
So instead we allocate the bitmap as part of SlabContext, which means
we don't need to do any allocations in SlabCheck and the bitmap goes
away together with the SlabContext.
Backpatch to 10, where the Slab context was introduced.
Author: Tomas Vondra
Reported-by: Andres Freund
Reviewed-by: Tom Lane
Backpatch-through: 10
Discussion: https://www.postgresql.org/message-id/20200116044119.g45f7pmgz4jmodxj%40alap3.anarazel.de
jsonb_set_lax() is the same as jsonb_set, except that it takes and extra
argument that specifies what to do if the value argument is NULL. The
default is 'use_json_null'. Other possibilities are 'raise_exception',
'return_target' and 'delete_key', all these behaviours having been
suggested as reasonable by various users.
Discussion: https://postgr.es/m/375873e2-c957-3a8d-64f9-26c43c2b16e7@2ndQuadrant.com
Reviewed by: Pavel Stehule
Two routines have been added in OpenSSL 1.1.0 to set the protocol bounds
allowed within a given SSL context:
- SSL_CTX_set_min_proto_version
- SSL_CTX_set_max_proto_version
As Postgres supports OpenSSL down to 1.0.1 (as of HEAD), equivalent
replacements exist in the tree, which are only available for the
backend. A follow-up patch is planned to add control of the SSL
protocol bounds for libpq, so move those routines to src/common/ so as
libpq can use them.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/4F246AE3-A7AE-471E-BD3D-C799D3748E03@yesql.se
Move all the backend-only code that'd crept into wchar.c and encnames.c
into mbutils.c.
To remove the last few #ifdef dependencies from wchar.c and encnames.c,
also make the following changes:
* Adjust get_encoding_name_for_icu to return NULL, not throw an error,
for unsupported encodings. Its sole caller can perfectly well throw an
error instead. (While at it, I also made this function and its sibling
is_encoding_supported_by_icu proof against out-of-range encoding IDs.)
* Remove the overlength-name error condition from pg_char_to_encoding.
It's completely silly not to treat that just like any other
the-name-is-not-in-the-table case.
Also, get rid of pg_mic_mblen --- there's no obvious reason why
conv.c shouldn't call pg_mule_mblen instead.
Other than that, this is just code movement and comment-polishing with
no functional changes. Notably, I reordered declarations in pg_wchar.h
to show which functions are frontend-accessible and which are not.
Discussion: https://postgr.es/m/CA+TgmoYO8oq-iy8E02rD8eX25T-9SmyxKWqqks5OMHxKvGXpXQ@mail.gmail.com
Formerly, various frontend directories symlinked these two sources
and then built them locally. That's an ancient, ugly hack, and
we now have a much better way: put them into libpgcommon.
So do that. (The immediate motivation for this is the prospect
of having to introduce still more symlinking if we don't.)
This commit moves these two files absolutely verbatim, for ease of
reviewing the git history. There's some follow-on work to be done
that will modify them a bit.
Robert Haas, Tom Lane
Discussion: https://postgr.es/m/CA+TgmoYO8oq-iy8E02rD8eX25T-9SmyxKWqqks5OMHxKvGXpXQ@mail.gmail.com
Previously, check_xact_readonly() was responsible for determining
which types of queries could not be run in a read-only transaction,
standard_ProcessUtility() was responsibility for prohibiting things
which were allowed in read only transactions but not in recovery, and
utility commands were basically prohibited in bulk in parallel mode by
calls to CommandIsReadOnly() in functions.c and spi.c. This situation
was confusing and error-prone. Accordingly, move all the checks to a
new function ClassifyUtilityCommandAsReadOnly(), which determines the
degree to which a given statement is read only.
In the old code, check_xact_readonly() inadvertently failed to handle
several statement types that actually should have been prohibited,
specifically T_CreatePolicyStmt, T_AlterPolicyStmt, T_CreateAmStmt,
T_CreateStatsStmt, T_AlterStatsStmt, and T_AlterCollationStmt. As a
result, thes statements were erroneously allowed in read only
transactions, parallel queries, and standby operation. Generally, they
would fail anyway due to some lower-level error check, but we
shouldn't rely on that. In the new code structure, future omissions
of this type should cause ClassifyUtilityCommandAsReadOnly() to
complain about an unrecognized node type.
As a fringe benefit, this means we can allow certain types of utility
commands in parallel mode, where it's safe to do so. This allows
ALTER SYSTEM, CALL, DO, CHECKPOINT, COPY FROM, EXPLAIN, and SHOW.
It might be possible to allow additional commands with more work
and thought.
Along the way, document the thinking process behind the current set
of checks, as per discussion especially with Peter Eisentraut. There
is some interest in revising some of these rules, but that seems
like a job for another patch.
Patch by me, reviewed by Tom Lane, Stephen Frost, and Peter
Eisentraut.
Discussion: http://postgr.es/m/CA+TgmoZ_rLqJt5sYkvh+JpQnfX0Y+B2R+qfi820xNih6x-FQOQ@mail.gmail.com
We've had numerous bug reports about how (1) IF NOT EXISTS clauses in
ALTER TABLE don't behave as-expected, and (2) combining certain actions
into one ALTER TABLE doesn't work, though executing the same actions as
separate statements does. This patch cleans up all of the cases so far
reported from the field, though there are still some oddities associated
with identity columns.
The core problem behind all of these bugs is that we do parse analysis
of ALTER TABLE subcommands too soon, before starting execution of the
statement. The root of the bugs in group (1) is that parse analysis
schedules derived commands (such as a CREATE SEQUENCE for a serial
column) before it's known whether the IF NOT EXISTS clause should cause
a subcommand to be skipped. The root of the bugs in group (2) is that
earlier subcommands may change the catalog state that later subcommands
need to be parsed against.
Hence, postpone parse analysis of ALTER TABLE's subcommands, and do
that one subcommand at a time, during "phase 2" of ALTER TABLE which
is the phase that does catalog rewrites. Thus the catalog effects
of earlier subcommands are already visible when we analyze later ones.
(The sole exception is that we do parse analysis for ALTER COLUMN TYPE
subcommands during phase 1, so that their USING expressions can be
parsed against the table's original state, which is what we need.
Arguably, these bugs stem from falsely concluding that because ALTER
COLUMN TYPE must do early parse analysis, every other command subtype
can too.)
This means that ALTER TABLE itself must deal with execution of any
non-ALTER-TABLE derived statements that are generated by parse analysis.
Add a suitable entry point to utility.c to accept those recursive
calls, and create a struct to pass through the information needed by
the recursive call, rather than making the argument lists of
AlterTable() and friends even longer.
Getting this to work correctly required a little bit of fiddling
with the subcommand pass structure, in particular breaking up
AT_PASS_ADD_CONSTR into multiple passes. But otherwise it's mostly
a pretty straightforward application of the above ideas.
Fixing the residual issues for identity columns requires refactoring of
where the dependency link from an identity column to its sequence gets
set up. So that seems like suitable material for a separate patch,
especially since this one is pretty big already.
Discussion: https://postgr.es/m/10365.1558909428@sss.pgh.pa.us
This uses the progress reporting infrastructure added by c16dc1aca5,
adding support for ANALYZE.
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Co-authored-by: Tatsuro Yamada <tatsuro.yamada.tf@nttcom.co.jp>
Reviewed-by: Julien Rouhaud, Robert Haas, Anthony Nowocien, Kyotaro Horiguchi,
Vignesh C, Amit Langote
For historical reasons, libpq used a separate libpq.rc file for the
Windows builds while all other components use a common file
win32ver.rc. With a bit of tweaking, the libpq build can also use the
win32ver.rc file. This removes a bit of duplicative code.
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/ad505e61-a923-e114-9f38-9867d161073f@2ndquadrant.com
The logic introduced in this routine as of 246a6c8 would report an
incorrect result when a session calls it to check if the temporary
namespace owned by the session is in use or not. It is possible to
optimize more the routine in this case to avoid a PGPROC lookup, but
let's keep the logic simple. As this routine is used only by autovacuum
for now, there were no live bugs, still let's be correct for any future
code involving it.
Author: Michael Paquier
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/20200113093703.GA41902@paquier.xyz
Backpatch-through: 11
Introduce new fields amusemaintenanceworkmem and amparallelvacuumoptions
in IndexAmRoutine for parallel vacuum. The amusemaintenanceworkmem tells
whether a particular IndexAM uses maintenance_work_mem or not. This will
help in controlling the memory used by individual workers as otherwise,
each worker can consume memory equal to maintenance_work_mem. The
amparallelvacuumoptions tell whether a particular IndexAM participates in
a parallel vacuum and if so in which phase (bulkdelete, vacuumcleanup) of
vacuum.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Tomas Vondra and Robert Haas
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1LmcD5aPogzwim5Nn58Ki+74a6Edghx4Wd8hAskvHaq5A@mail.gmail.com
If no permanent replication slot is configured using
primary_slot_name, the walreceiver now creates and uses a temporary
replication slot. A new setting wal_receiver_create_temp_slot can be
used to disable this behavior, for example, if the remote instance is
out of replication slots.
Reviewed-by: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/CA%2Bfd4k4dM0iEPLxyVyme2RAFsn8SUgrNtBJOu81YqTY4V%2BnqZA%40mail.gmail.com
A view with conditional INSTEAD rules and no unconditional INSTEAD
rules or INSTEAD OF triggers is not auto-updatable. Previously we
relied on a check in the executor to catch this, but that's
problematic since the planner may fail to properly handle such a query
and thus return a particularly unhelpful error to the user, before
reaching the executor check.
Instead, trap this in the rewriter and report the correct error there.
Doing so also allows us to include more useful error detail than the
executor check can provide. This doesn't change the existing behaviour
of updatable views; it merely ensures that useful error messages are
reported when a view isn't updatable.
Per report from Pengzhou Tang, though not adopting that suggested fix.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAG4reAQn+4xB6xHJqWdtE0ve_WqJkdyCV4P=trYr4Kn8_3_PEA@mail.gmail.com
This test was trying to test the mechanism to release kernel FDs as needed
to get us under the max_safe_fds limit in case of spill files. To do that,
it needs to set max_files_per_process to a very low value which doesn't
even permit starting of the server in the case when there are a few already
opened files. This test also won't work on platforms where we use one FD
per semaphore.
Backpatch-through: 10, till where this test was added
Discussion:
https://postgr.es/m/CAA4eK1LHhERi06Q+MmP9qBXBBboi+7WV3910J0aUgz71LcnKAw@mail.gmail.comhttps://postgr.es/m/6485.1578583522@sss.pgh.pa.us
Previously, the core scanner's yy_transition[] array had 37045 elements.
Since that number is larger than INT16_MAX, Flex generated the array to
contain 32-bit integers. By reimplementing some of the bulkier scanner
rules, this patch reduces the array to 20495 elements. The much smaller
total length, combined with the consequent use of 16-bit integers for
the array elements reduces the binary size by over 200kB. This was
accomplished in two ways:
1. Consolidate handling of quote continuations into a new start condition,
rather than duplicating that logic for five different string types.
2. Treat Unicode strings and identifiers followed by a UESCAPE sequence
as three separate tokens, rather than one. The logic to de-escape
Unicode strings is moved to the filter code in parser.c, which already
had the ability to provide special processing for token sequences.
While we could have implemented the conversion in the grammar, that
approach was rejected for performance and maintainability reasons.
Performance in microbenchmarks of raw parsing seems equal or slightly
faster in most cases, and it's reasonable to expect that in real-world
usage (with more competition for the CPU cache) there will be a larger
win. The exception is UESCAPE sequences; lexing those is about 10%
slower, primarily because the scanner now has to be called three times
rather than one. This seems acceptable since that feature is very
rarely used.
The psql and epcg lexers are likewise modified, primarily because we
want to keep them all in sync. Since those lexers don't use the
space-hogging -CF option, the space savings is much less, but it's
still good for perhaps 10kB apiece.
While at it, merge the ecpg lexer's handling of C-style comments used
in SQL and in C. Those have different rules regarding nested comments,
but since we already have the ability to keep track of the previous
start condition, we can use that to handle both cases within a single
start condition. This matches the core scanner more closely.
John Naylor
Discussion: https://postgr.es/m/CACPNZCvaoa3EgVWm5yZhcSTX6RAtaLgniCPcBVOCwm8h3xpWkw@mail.gmail.com
The use of pg_atoi() for parsing a string into an Oid fails for values
larger than INT32_MAX, since OIDs are unsigned. Instead, use
atooid(). While this has less error checking, the contents of the
data directory are expected to be trustworthy, so we don't need to go
out of our way to do full error checking.
Discussion: https://www.postgresql.org/message-id/flat/dea47fc8-6c89-a2b1-07e3-754ff1ab094b%402ndquadrant.com
Earlier, we use to postpone deleting empty pages till the second stage of
vacuum to amortize the cost of scanning internal pages. However, that can
sometimes (say vacuum is canceled or errored between first and second
stage) delay the pages to be recycled.
Another thing is that to facilitate deleting empty pages in the second
stage, we need to share the information about internal and empty pages
between different stages of vacuum. It will be quite tricky to share this
information via DSM which is required for the upcoming parallel vacuum
patch.
Also, it will bring the logic to reclaim deleted pages closer to nbtree
where we delete empty pages in each pass.
Overall, the advantages of deleting empty pages in each pass outweigh the
advantages of postponing the same.
Author: Dilip Kumar, with changes by Amit Kapila
Reviewed-by: Sawada Masahiko and Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1LGr+MN0xHZpJ2dfS8QNQ1a_aROKowZB+MPNep8FVtwAA@mail.gmail.com
Until now we've only used a single multivariate MCV list per relation,
covering the largest number of clauses. So for example given a query
SELECT * FROM t WHERE a = 1 AND b =1 AND c = 1 AND d = 1
and extended statistics on (a,b) and (c,d), we'd only pick and use one
of them. This commit improves this by repeatedly picking and applying
the best statistics (matching the largest number of remaining clauses)
until no additional statistics is applicable.
This greedy algorithm is simple, but may not be optimal. A different
choice of statistics may leave fewer clauses unestimated and/or give
better estimates for some other reason.
This can however happen only when there are overlapping statistics, and
selecting one makes it impossible to use the other. E.g. with statistics
on (a,b), (c,d), (b,c,d), we may pick either (a,b) and (c,d) or (b,c,d).
But it's not clear which option is the best one.
We however assume cases like this are rare, and the easiest solution is
to define statistics covering the whole group of correlated columns. In
the future we might support overlapping stats, using some of the clauses
as conditions (in conditional probability sense).
Author: Tomas Vondra
Reviewed-by: Mark Dilger, Kyotaro Horiguchi
Discussion: https://postgr.es/m/20191028152048.jc6pqv5hb7j77ocp@development
When considering functional dependencies during selectivity estimation,
it's not necessary to bother with selecting the best extended statistic
object and then use just dependencies from it. We can simply consider
all applicable functional dependencies at once.
This means we need to deserialie all (applicable) dependencies before
applying them to the clauses. This is a bit more expensive than picking
the best statistics and deserializing dependencies for it. To minimize
the additional cost, we ignore statistics that are not applicable.
Author: Tomas Vondra
Reviewed-by: Mark Dilger
Discussion: https://postgr.es/m/20191028152048.jc6pqv5hb7j77ocp@development
When estimating the selectivity of "range_var <@ range_constant" or
"range_var @> range_constant", if the upper (or respectively lower)
bound of the range_constant was above the last bin of the range_var's
histogram, the code would access uninitialized memory and potentially
crash (though it seems the probability of a crash is quite low).
Handle the endpoint cases explicitly to fix that.
While at it, be more paranoid about the possibility of getting NaN
or other silly results from the range type's subdiff function.
And improve some comments.
Ordinarily we'd probably add a regression test case demonstrating
the bug in unpatched code. But it's too hard to get it to crash
reliably because of the uninitialized-memory dependence, so skip that.
Per bug #16122 from Adam Scott. It's been broken from the beginning,
apparently, so backpatch to all supported branches.
Diagnosis by Michael Paquier, patch by Andrey Borodin and Tom Lane.
Discussion: https://postgr.es/m/16122-eb35bc248c806c15@postgresql.org
On the publisher, it was assumed that an INSERT change cannot happen for
a relation with no replica identity. However this is true only for a
change that needs references to old rows, aka UPDATE or DELETE, so
trying to use logical replication with a relation that has no replica
identity led to an assertion failure in the publisher when issuing an
INSERT. This commit removes the incorrect assertion, and adds more
regression tests to provide coverage for relations without replica
identity.
Reported-by: Neha Sharma
Author: Dilip Kumar, Michael Paquier
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/CANiYTQsL1Hb8_Km08qd32svrqNumXLJeoGo014O7VZymgOhZEA@mail.gmail.com
Backpatch-through: 10
Fix assorted bugs in handling of non-blocking I/O when using GSSAPI
encryption. The encryption layer could return the wrong status
information to its caller, resulting in effectively dropping some data
(or possibly in aborting a not-broken connection), or in a "livelock"
situation where data remains to be sent but the upper layers think
transmission is done and just go to sleep. There were multiple small
thinkos contributing to that, as well as one big one (failure to think
through what to do when a send fails after having already transmitted
data). Note that these errors could cause failures whether the client
application asked for non-blocking I/O or not, since both libpq and
the backend always run things in non-block mode at this level.
Also get rid of use of static variables for GSSAPI inside libpq;
that's entirely not okay given that multiple connections could be
open at once inside a single client process.
Also adjust a bunch of random small discrepancies between the frontend
and backend versions of the send/receive functions -- except for error
handling, they should be identical, and now they are.
Also extend the Kerberos TAP tests to exercise cases where nontrivial
amounts of data need to be pushed through encryption. Before, those
tests didn't provide any useful coverage at all for the cases of
interest here. (They still might not, depending on timing, but at
least there's a chance.)
Per complaint from pmc@citylink and subsequent investigation.
Back-patch to v12 where this code was introduced.
Discussion: https://postgr.es/m/20200109181822.GA74698@gate.oper.dinoex.org
FileClose() failure ordinarily causes a PANIC. Suppose the user
disables that PANIC via data_sync_retry=on. After mdclose() issued a
FileClose() that failed, calls into md.c raised SIGSEGV. This fix adds
repalloc() calls during mdclose(); update a comment about ignoring
repalloc() cost. The rate of relation segment count change is a minor
factor; more relevant to overall performance is the rate of mdclose()
and subsequent re-opening of segments. Back-patch to v10, where commit
45e191e3aa introduced the bug.
Reviewed by Kyotaro Horiguchi.
Discussion: https://postgr.es/m/20191222091930.GA1280238@rfd.leadboat.com
Experience so far suggests that getting these tests to pass on
all libedit versions that are out there may be impossible, or
require dumbing down the tests to the point of uselessness.
So we need to provide a way to skip them when the user knows they'll
fail. An environment variable is probably the most convenient way
to deal with this; it's easy for, e.g., a buildfarm animal's
configuration to set up.
Discussion: https://postgr.es/m/9594.1578586797@sss.pgh.pa.us
The core idea of this patch is to make the parser generate join alias
Vars (that is, ones with varno pointing to a JOIN RTE) only when the
alias Var is actually different from any raw join input, that is a type
coercion and/or COALESCE is necessary to generate the join output value.
Otherwise just generate varno/varattno pointing to the relevant join
input column.
In effect, this means that the planner's flatten_join_alias_vars()
transformation is already done in the parser, for all cases except
(a) columns that are merged by JOIN USING and are transformed in the
process, and (b) whole-row join Vars. In principle that would allow
us to skip doing flatten_join_alias_vars() in many more queries than
we do now, but we don't have quite enough infrastructure to know that
we can do so --- in particular there's no cheap way to know whether
there are any whole-row join Vars. I'm not sure if it's worth the
trouble to add a Query-level flag for that, and in any case it seems
like fit material for a separate patch. But even without skipping the
work entirely, this should make flatten_join_alias_vars() faster,
particularly where there are nested joins that it previously had to
flatten recursively.
An essential part of this change is to replace Var nodes'
varnoold/varoattno fields with varnosyn/varattnosyn, which have
considerably more tightly-defined meanings than the old fields: when
they differ from varno/varattno, they identify the Var's position in
an aliased JOIN RTE, and the join alias is what ruleutils.c should
print for the Var. This is necessary because the varno change
destroyed ruleutils.c's ability to find the JOIN RTE from the Var's
varno.
Another way in which this change broke ruleutils.c is that it's no
longer feasible to determine, from a JOIN RTE's joinaliasvars list,
which join columns correspond to which columns of the join's immediate
input relations. (If those are sub-joins, the joinaliasvars entries
may point to columns of their base relations, not the sub-joins.)
But that was a horrid mess requiring a lot of fragile assumptions
already, so let's just bite the bullet and add some more JOIN RTE
fields to make it more straightforward to figure that out. I added
two integer-List fields containing the relevant column numbers from
the left and right input rels, plus a count of how many merged columns
there are.
This patch depends on the ParseNamespaceColumn infrastructure that
I added in commit 5815696bc. The biggest bit of code change is
restructuring transformFromClauseItem's handling of JOINs so that
the ParseNamespaceColumn data is propagated upward correctly.
Other than that and the ruleutils fixes, everything pretty much
just works, though some processing is now inessential. I grabbed
two pieces of low-hanging fruit in that line:
1. In find_expr_references, we don't need to recurse into join alias
Vars anymore. There aren't any except for references to merged USING
columns, which are more properly handled when we scan the join's RTE.
This change actually fixes an edge-case issue: we will now record a
dependency on any type-coercion function present in a USING column's
joinaliasvar, even if that join column has no references in the query
text. The odds of the missing dependency causing a problem seem quite
small: you'd have to posit somebody dropping an implicit cast between
two data types, without removing the types themselves, and then having
a stored rule containing a whole-row Var for a join whose USING merge
depends on that cast. So I don't feel a great need to change this in
the back branches. But in theory this way is more correct.
2. markRTEForSelectPriv and markTargetListOrigin don't need to recurse
into join alias Vars either, because the cases they care about don't
apply to alias Vars for USING columns that are semantically distinct
from the underlying columns. This removes the only case in which
markVarForSelectPriv could be called with NULL for the RTE, so adjust
the comments to describe that hack as being strictly internal to
markRTEForSelectPriv.
catversion bump required due to changes in stored rules.
Discussion: https://postgr.es/m/7115.1577986646@sss.pgh.pa.us
This tells you about allocations that have been made from the main
shared memory segment. The original patch also tried to show information
about dynamic shared memory allocation as well, but I decided to
leave that problem for another time.
Andres Freund and Robert Haas, reviewed by Michael Paquier, Marti
Raudsepp, Tom Lane, Álvaro Herrera, and Kyotaro Horiguchi.
Discussion: http://postgr.es/m/20140504114417.GM12715@awork2.anarazel.de
We currently have several sets of files generated from data provided
by Unicode. These all have ad hoc rules and instructions for updating
when new Unicode versions appear, and it's not done consistently.
This patch centralizes and automates the process and makes it part of
the release checklist. The Unicode and CLDR versions are specified in
Makefile.global.in. There is a new make target "update-unicode" that
downloads all the relevant files and runs the generation script.
There is also a new script for generating the table of combining
characters for ucs_wcwidth(). That table is now in a separate include
file rather than hardcoded into the middle of other code. This is
based on the script that was used for generating
d8594d123c, but the script itself wasn't
committed at that time.
Reviewed-by: John Naylor <john.naylor@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c8d05f42-443e-6c23-819b-05b31759a37c@2ndquadrant.com
Change the exception syntax used in the tests to use the more current
except Exception as ex:
rather than the old
except Exception, ex:
Since support for Python <2.6 has been removed, all supported versions
now support the new style, and we can save one step in the Python 3
compatibility conversion.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/98b69261-298c-13d2-f34d-836fd9c29b21%402ndquadrant.com
Supporting very old Python versions is a maintenance burden,
especially with the several variant test files to maintain for Python
<2.6.
Since we have dropped support for older OpenSSL versions in
7b283d0e1d, RHEL 5 is now effectively
desupported, and that was also the only mainstream operating system
still using Python versions before 2.6, so it's a good time to drop
those as well.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/98b69261-298c-13d2-f34d-836fd9c29b21%402ndquadrant.com
Make the value null only at pg_stat_activity-output time, as suggested
by Tom Lane, instead of messing with the internal state. This should
appease buildfarm members with force_parallel_mode=regress, which are
running parallel queries on logical replication walsenders.
The fact that walsenders can run parallel queries should perhaps be
studied more carefully, but for the moment let's get rid of the red
blots in buildfarm.
Backpatch to pg10, like the previous commit.
Discussion: https://postgr.es/m/30804.1578438763@sss.pgh.pa.us
Use the parser's standard type coercion machinery to convert the
output column(s) of a SQL function's final SELECT or RETURNING
to the type(s) they should have according to the function's declared
result type. We'll allow any case where an assignment-level
coercion is available. Previously, we failed unless the required
coercion was a binary-compatible one (and the documentation ignored
this, falsely claiming that the types must match exactly).
Notably, the coercion now accounts for typmods, so that cases where
a SQL function is declared to return a composite type whose columns
are typmod-constrained now behave as one would expect. Arguably
this aspect is a bug fix, but the overall behavioral change here
seems too large to consider back-patching.
A nice side-effect is that functions can now be inlined in a
few cases where we previously failed to do so because of type
mismatches.
Discussion: https://postgr.es/m/18929.1574895430@sss.pgh.pa.us
ALTER TABLE failed if a column referenced in a GENERATED expression
had been added or changed in type earlier in the ALTER command.
That's because the GENERATED expression needs to be evaluated
against the table's updated tuples, but it was being evaluated
against the original tuples. (Fortunately the executor has adequate
cross-checks to notice the mismatch, so we just got an obscure error
message and not anything more dangerous.)
Per report from Andreas Joseph Krogh. Back-patch to v12 where
GENERATED was added.
Discussion: https://postgr.es/m/VisenaEmail.200.231b0a41523275d0.16ea7f800c7@tc7-visena
Returning a non-NULL time is pointless, sinc a walsender is not a
process that would be running normal transactions anyway, but the code
was unintentionally exposing the process start time intermittently,
which was not only bogus but it also confused monitoring systems looking
for idle transactions. Fix by avoiding all updates in walsenders.
Backpatch to 11, where walsenders started appearing in pg_stat_activity.
Reported-by: Tomas Vondra
Discussion: https://postgr.es/m/20191209234409.exe7osmyalwkt5j4@development
Instead of always calling heap_fetch_toast_slice during detoasting,
invoke a table AM callback which, when the toast table is a heap
table, will be heap_fetch_toast_slice.
This makes it possible for a table AM other than heap to be used
as a TOAST table. It also completes the series of commits intended
to improve the interaction of tableam with TOAST that began with
commit 8b94dab06617ef80a0901ab103ebd8754427ef5a; detoast.c is
now, hopefully, fully AM-independent.
Patch by me, reviewed by Andres Freund and Peter Eisentraut.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
Previously, the toast table had to be implemented by the same AM that
was used for the main table, which was bad, because the detoasting
code won't work with anything but heap. This commit doesn't fix the
latter problem, although there's another patch coming which does,
but it does let you pick something that works (i.e. heap, right now).
Patch by me, reviewed by Andres Freund.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
This one-line change provoked a lot of discussion, but ultimately
the consensus seems to be that allowing a larger value might be
useful to somebody, and probably won't hurt anyone who chooses
not to take advantage of the higher maximum limit.
Vyacheslav Makarov, reviewed by many people.
Discussion: http://postgr.es/m/7b5ecc5a9991045e2f13c84e3047541d@postgrespro.ru
Instead of hard-wiring the netmask as /32, allow it to be specified
where we specify the server address. This will ease changing the
test to use IPv6, when/if somebody wants to do that.
Also remove the hard-wired pg_hba.conf entries for IPv6 (::1/128).
These have never had any usefulness, because the client side
of the tests has always explicitly connected to $SERVERHOSTADDR
which has always been set to IPv4 (127.0.0.1). All they accomplish
is to break the test on non-IPv6-supporting hosts, and besides
that they violate the express intent of the code to minimize the
server's range of allowed connections.
This could be back-patched, perhaps, but for now I don't see
a need to.
Discussion: https://postgr.es/m/1899.1578356089@sss.pgh.pa.us
Since the WAL flush position only moves forward, it's safe to cache
its previous value within each walsender process, and update from
shared memory only once we've caught up to the previously-seen value.
When there are many active walsenders, this makes for a very significant
reduction in the amount of contention on the XLogCtl->info_lck spinlock.
This patch also adjusts the logic so that we update our idea of the
flush position after processing a WAL record, rather than beforehand.
This may cause us to realize we're not caught up when the preceding
coding would've thought that we were, but that seems all to the good;
it may avoid a useless sleep-and-wakeup cycle.
Back-patch to v12. The contention problem exists in prior branches,
but it's much less severe (due to inefficiencies elsewhere) so there
seems no need to take any risk of back-patching further.
Pierre Ducroquet, reviewed by Julien Rouhaud
Discussion: https://postgr.es/m/2931018.Vxl9zapr77@pierred-pdoc
Support is out of scope from all the major vendors for these versions
(for example RHEL5 uses a version based on 0.9.8, and RHEL6 uses 1.0.1),
and it created some extra maintenance work. Upstream has stopped
support of 0.9.8 in December 2015 and of 1.0.0 in February 2016.
Since b1abfec, note that the default SSL protocol version set with
ssl_min_protocol_version is TLSv1.2, whose support was added in OpenSSL
1.0.1, so there is no point to enforce ssl_min_protocol_version to TLSv1
in the SSL tests.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/20191205083252.GE5064@paquier.xyz
The fastpath insert optimization's incomplete split flag Assert() is
redundant. We'll reach the more general Assert() within
_bt_findinsertloc() in all cases. (Besides, Assert()'ing that the
rightmost page doesn't have the flag set never made much sense.)
The true explanation for Peter Geoghegan's trouble report turns out
to be that he has a ~/.inputrc that affects readline's behavior
enough to break this test. Prevent readline from reading that file.
Also, the best way to prevent TERM from affecting the results seems
to be to unset it altogether, not to set it to "xterm". The latter
choice licenses readline to emit xterm escape sequences, and there's
a lot of variation in exactly what it will emit.
Revert changes that attempted to account exactly for xterm escape
sequences. We shouldn't need that with TERM unset, and it was not
looking like a maintainable solution anyway.
Discussion: https://postgr.es/m/23181.1578167938@sss.pgh.pa.us
Right at the moment, this is making things worse not better in the
buildfarm. I'm not happy with anything about the current state,
but let's at least try to have a green buildfarm report while further
investigation continues.
Discussion: https://postgr.es/m/23181.1578167938@sss.pgh.pa.us
Depending on as-yet-incompletely-explained factors, readline/libedit
might choose to emit screen-control escape sequences as part of
repainting the display. I'd tried to make the test patterns avoid
matching parts of the output that are likely to contain such, but
it seems that there's really no way around matching them explicitly
in some places, unless we want to just give up testing some behaviors
such as display of alternatives.
Per report from Peter Geoghegan.
Discussion: https://postgr.es/m/CAH2-WznPzfWHu8PQwv1Qjpf4wQVPaaWpoO5NunFz9zsYKB4uJA@mail.gmail.com
Pass ParseState into the functions called from
standard_ProcessUtility() instead passing the query string and query
environment separately. No functionality change, but it makes the
notation consistent. We had already started moving things into
that direction piece by piece, and this completes it.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/6e7aa4a1-be6a-1a75-b1f9-83a678e5184a@2ndquadrant.com
Commit 558a9165e0 taught _bt_delitems_delete() to produce its own XID
horizon on the primary. Standbys no longer needed to generate their own
latestRemovedXid, since they could just use the explicitly logged value
from the primary instead. The deleted offset numbers array from the
xl_btree_delete WAL record was no longer used by the REDO routine for
anything other than deleting the items.
This enables a minor optimization: We now treat the array as buffer
state, not generic WAL data, following _bt_delitems_vacuum()'s example.
This should be a minor win, since it allows us to avoid including the
deleted items array in cases where XLogInsert() stores the whole buffer
anyway. The primary goal here is to make the code more maintainable,
though. Removing inessential differences between the two functions
highlights the fundamental differences that remain.
Also change xl_btree_delete to use uint32 for the size of the array of
item offsets being deleted. This brings xl_btree_delete closer to
xl_btree_vacuum. Furthermore, it seems like a good idea to use an
explicit-width integer type (the field was previously an "int").
Bump XLOG_PAGE_MAGIC because xl_btree_delete changed.
Discussion: https://postgr.es/m/CAH2-Wzkz4TjmezzfAbaV1zYrh=fr0bCpzuJTvBe5iUQ3aUPsCQ@mail.gmail.com
Escape non-printable characters in failure reports, by using Data::Dumper
in Useqq mode. Also, bump $Test::Builder::Level so the diagnostic
references the calling line, and use diag() instad of note(),
so it shows even in non-verbose mode (per request from Christoph Berg).
Also, give up on trying to test for the specific way that readline
chooses to overwrite existing text in the \DRD -> \drds test.
There are too many variants, it seems, at least on the libedit
side of things.
Dagfinn Ilmari Mannsåker and Tom Lane
Discussion: https://postgr.es/m/20200103110128.GA28967@msg.df7cb.de
Debian unstable is shipping a broken version of libedit: it de-escapes
words before passing them to the application's tab completion function,
preventing us from recognizing backslash commands. Fortunately,
we have enough information available to dig the original text out of
rl_line_buffer, so ignore the string argument and do that.
I view this as a temporary workaround to get the affected buildfarm
members back to green in the wake of 7c015045b. I hope we can get
rid of it once somebody fixes Debian's libedit; hence, no back-patch,
at least for now.
Discussion: https://postgr.es/m/20200103110128.GA28967@msg.df7cb.de
Adjust a comment that describes how alignment of the new left page high
key works in btree_xlog_split(), the nbtree page split REDO routine.
The wording used before commit 2c03216d83 is much clearer, so go back
to that.
When row triggers exist in partitioned partitions that are not either
part of FKs or deferred unique constraints, they are not correctly
cloned to their partitions. That's because they are marked "internal",
and those are purposefully skipped when doing the clone triggers dance.
Fix by relaxing the condition on which internal triggers are skipped.
Amit Langote initially diagnosed the problem and proposed a fix, but I
used a different approach.
Reported-by: Petr Fedorov
Discussion: https://postgr.es/m/6b3f0646-ba8c-b3a9-c62d-1c6651a1920f@phystech.edu
Up to now, psql's tab-complete.c has had exactly no regression test
coverage. This patch is an experimental attempt to add some.
This needs Perl's IO::Pty module, which isn't installed everywhere,
so the test script just skips all tests if that's not present.
There may be other portability gotchas too, so I await buildfarm
results with interest.
So far this just covers a few very basic keyword-completion and
query-driven-completion scenarios, which should be enough to let us
get a feel for whether this is practical at all from a portability
standpoint. If it is, there's lots more that can be done.
Discussion: https://postgr.es/m/10967.1577562752@sss.pgh.pa.us
On further reflection about commit 4d02eb017, it occurs to me that
expandRTE() had better agree with what addRangeTableEntryForFunction()
is doing. So teach that about functions possibly having typmods, too.
One code path in addRangeTableEntryForFunction() neglected to assign
a collation to the tupdesc entry it constructs (which is a bit odd
considering the other path did do so). This didn't matter before commit
5815696bc, because nothing would look at the type data in this tupdesc;
but now it does.
While at it, make sure we assign the correct typmod as well. Most
function expressions don't have a determinate typmod, but some do.
Per buildfarm, which showed failures in non-C collations, a case
I'd not thought to test for this patch :-(
When I added the ParseNamespaceItem data structure (in commit 5ebaaa494),
it wasn't very tightly integrated into the parser's APIs. In the wake of
adding p_rtindex to that struct (commit b541e9acc), there is a good reason
to make more use of it: by passing around ParseNamespaceItem pointers
instead of bare RTE pointers, we can get rid of various messy methods for
passing back or deducing the rangetable index of an RTE during parsing.
Hence, refactor the addRangeTableEntryXXX functions to build and return
a ParseNamespaceItem struct, not just the RTE proper; and replace
addRTEtoQuery with addNSItemToQuery, which is passed a ParseNamespaceItem
rather than building one internally.
Also, add per-column data (a ParseNamespaceColumn array) to each
ParseNamespaceItem. These arrays are built during addRangeTableEntryXXX,
where we have column type data at hand so that it's nearly free to fill
the data structure. Later, when we need to build Vars referencing RTEs,
we can use the ParseNamespaceColumn info to avoid the rather expensive
operations done in get_rte_attribute_type() or expandRTE().
get_rte_attribute_type() is indeed dead code now, so I've removed it.
This makes for a useful improvement in parse analysis speed, around 20%
in one moderately-complex test query.
The ParseNamespaceColumn structs also include Var identity information
(varno/varattno). That info isn't actually being used in this patch,
except that p_varno == 0 is a handy test for a dropped column.
A follow-on patch will make more use of it.
Discussion: https://postgr.es/m/2461.1577764221@sss.pgh.pa.us
Currently while decoding changes, if the number of changes exceeds a
certain threshold, we spill those to disk. And this happens for each
(sub)transaction. Now, while reading all these files, we don't close them
until we read all the files. While reading these files, if the number of
such files exceeds the maximum number of file descriptors, the operation
errors out.
Use PathNameOpenFile interface to open these files as that internally has
the mechanism to release kernel FDs as needed to get us under the
max_safe_fds limit.
Reported-by: Amit Khandekar
Author: Amit Khandekar
Reviewed-by: Amit Kapila
Backpatch-through: 9.4
Discussion: https://postgr.es/m/CAJ3gD9c-sECEn79zXw4yBnBdOttacoE-6gAyP0oy60nfs_sabQ@mail.gmail.com
_bt_delitems_vacuum() comments claimed that it isn't worth another scan
of the page to avoid falsely unsetting the BTP_HAS_GARBAGE page flag
hint (this happens to be the same wording that was removed from
_bt_delitems_delete() by my recent commit fe97c61c). The comments made
little sense, though. The issue can't have much to do with performing a
second scan of the target leaf page, since an LP_DEAD test could easily
be performed in the first scan of the page anyway (the scan that takes
place in btvacuumpage() caller).
Revise the explanation. It makes much more sense to frame this as an
issue about recovery conflicts. _bt_delitems_vacuum() cannot easily
generate an XID cutoff in the same way that _bt_delitems_delete() is
designed to.
Falsely unsetting the page flag is not ideal, and is likely to happen
more often than was supposed by the original comments. Explain why it
usually isn't a problem in practice. There may be an argument for
_bt_delitems_vacuum() not clearing the BTP_HAS_GARBAGE bit, removing the
question of it being falsely unset by VACUUM (there may even be an
argument for not using a page level hint at all). This can be revisited
later.
If we have, say, an int column that is left-joined to a bigint column
with USING, the merged column is the int column promoted to bigint.
GROUP BY's tests for whether grouping on the merged column allows a
reference to the underlying column, or vice versa, should know about
that relationship --- and they do. But I nearly broke this case with
an ill-advised optimization, so the lack of any test coverage for it
seems like a bad idea.
Commit fe97c61c updated LP_DEAD item deletion comments, but missed a
minor discrepancy on the REDO side. Fix it now.
In passing, don't talk about the btree_xlog_vacuum() behavior within
btree_xlog_delete(). The reliance on XLOG_HEAP2_CLEANUP_INFO records
for recovery conflicts is already discussed within btvacuumpage() and
mentioned again in passing above btree_xlog_vacuum(), which seems
sufficient.
Thomas Munro
Alvaro Herrera
Tom Lane
Fujii Masao
Michael Paquier
Robert Haas
Peter Eisentraut
Amit Kapila
Heikki Linnakangas
Dean Rasheed
Andres Freund
Alexander Korotkov
Tomas Vondra
Andrew Dunstan
Bruce Momjian
Noah Misch
Peter Geoghegan
Stephen Frost