Issues relate only to subtransactions that hold AccessExclusiveLocks
when replayed on standby.
Prior to PG10, aborting subtransactions that held an
AccessExclusiveLock failed to release the lock until top level commit or
abort. 49bff5300d fixed that.
However, 49bff5300d also introduced a similar bug where subtransaction
commit would fail to release an AccessExclusiveLock, leaving the lock to
be removed sometimes early and sometimes late. This commit fixes
that bug also. Backpatch to PG10 needed.
Tested by observation. Note need for multi-node isolationtester to improve
test coverage for this and other HS cases.
Reported-by: Simon Riggs
Author: Simon Riggs
They already fail anyway, but prior to this patch they raise an ugly
error message about a lock that cannot be acquired. This just improves
the message.
Author: Masahiko Sawada
Reported-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoBZau4g4_NUf3BKNd=CdYK+xaPdtJCzvOC1TxGdTiJx_Q@mail.gmail.com
Reviewed-by: Kuntal Ghosh, Alexander Korotkov, Simon Riggs, Michaël Paquier, Álvaro Herrera
This bug causes a lseek() failure to be reported as a "could not open"
failure in the error message, muddling bug reports. I introduced this
copy-and-pasteo in commit 78e1220104.
Noticed while reviewing code for bug report #15221, from lily liang. In
version 10 the affected function is only used by multixact.c and
commit_ts, and only in corner-case circumstances, neither of which are
involved in the reported bug (a pg_subtrans failure.)
Author: Álvaro Herrera
Any changes on page should be done in critical section, so move
_bt_upgrademetapage into critical section. Improve comment. Found by Amit
Kapila during post-commit review of 857f9c36.
Author: Amit Kapila
The "l" (ell) width spec means something in the corresponding scanf usage,
but not here. While modern POSIX says that applying "l" to "f" and other
floating format specs is a no-op, SUSv2 says it's undefined. Buildfarm
experience says that some old compilers emit warnings about it, and at
least one old stdio implementation (mingw's "ANSI" option) actually
produces wrong answers and/or crashes.
Discussion: https://postgr.es/m/21670.1526769114@sss.pgh.pa.us
Discussion: https://postgr.es/m/c085e1da-0d64-1c15-242d-c921f32e0d5c@dunslane.net
- Change vacuum_cleanup_index_scale_factor GUC to PGC_USERSET.
vacuum_cleanup_index_scale_factor GUC was defined as PGC_SIGHUP. But this
GUC affects not only autovacuum. So it might be useful to change it from user
session in order to influence manually runned VACUUM.
- Add missing tab-complete support for vacuum_cleanup_index_scale_factor
reloption.
- Fix condition for B-tree index cleanup.
Zero value of vacuum_cleanup_index_scale_factor means that user wants B-tree
index cleanup to be never skipped.
- Documentation and comment improvements
Authors: Justin Pryzby, Alexander Korotkov, Liudmila Mantrova
Reviewed by: all authors and Robert Haas
Discussion: https://www.postgresql.org/message-id/flat/20180502023025.GD7631%40telsasoft.com
If a continuation record is split so that its first half has already been
removed from the master, and is only present in pg_wal, and there is a
recycled WAL segment in the standby server that looks like it would
contain the second half, recovery would get stuck. The code in
XLogPageRead() incorrectly started streaming at the beginning of the
WAL record, even if we had already read the first page.
Backpatch to 9.4. In principle, older versions have the same problem, but
without replication slots, there was no straightforward mechanism to
prevent the master from recycling old WAL that was still needed by standby.
Without such a mechanism, I think it's reasonable to assume that there's
enough slack in how many old segments are kept around to not run into this,
or you have a WAL archive.
Reported by Jonathon Nelson. Analysis and patch by Kyotaro HORIGUCHI, with
some extra comments by me.
Discussion: https://www.postgresql.org/message-id/CACJqAM3xVz0JY1XFDKPP%2BJoJAjoGx%3DGNuOAshEDWCext7BFvCQ%40mail.gmail.com
Dan Wood diagnosed a long-standing problem that pages containing tuples
that are locked by multixacts containing live lockers may spuriously end
up as candidates for getting their all-visible flag set. This has the
long-term effect that multixacts remain unfrozen; this may previously
pass undetected, but since commit XYZ it would be reported as
"ERROR: found multixact 134100944 from before relminmxid 192042633"
because when a later vacuum tries to freeze the page it detects that a
multixact that should have gotten frozen, wasn't.
Dan proposed a (correct) patch that simply sets a variable to its
correct value, after a bogus initialization. But, per discussion, it
seems better coding to avoid the bogus initializations altogether, since
they could give rise to more bugs later. Therefore this fix rewrites
the logic a little bit to avoid depending on the bogus initializations.
This bug was part of a family introduced in 9.6 by commit a892234f830e;
later, commit 38e9f90a22 fixed most of them, but this one was
unnoticed.
Authors: Dan Wood, Pavan Deolasee, Álvaro Herrera
Reviewed-by: Masahiko Sawada, Pavan Deolasee, Álvaro Herrera
Discussion: https://postgr.es/m/84EBAC55-F06D-4FBE-A3F3-8BDA093CE3E3@amazon.com
nbtsort.c does not need to truncate away non-key attributes for the
minimum key of the leftmost page on a level, since this is only used to
build a minus infinity downlink for the level's leftmost page.
Truncating away non-key attributes in advance of truncating away all
attributes in _bt_sortaddtup() does not affect the correctness of CREATE
INDEX, but it is misleading.
Author: Peter Geoghegan
Discussion: https://www.postgresql.org/message-id/CAH2-WzkAS2M3ussHG-s_Av=Zo6dPjOxyu5fNRkYnxQV+YzGQ4w@mail.gmail.com
The principle behind the locking was not very well thought-out, and not
documented. Add a section in the README to explain how it's supposed to
work, and change the code so that it actually works that way.
This fixes two bugs:
1. If fast update was turned on concurrently, subsequent inserts to the
pending list would not conflict with predicate locks that were acquired
earlier, on entry pages. The included 'predicate-gin-fastupdate' test
demonstrates that. To fix, make all scans acquire a predicate lock on
the metapage. That lock represents a scan of the pending list, whether
or not there is a pending list at the moment. Forget about the
optimization to skip locking/checking for locks, when fastupdate=off.
2. If a scan finds no match, it still needs to lock the entry page. The
point of predicate locks is to lock the gabs between values, whether
or not there is a match. The included 'predicate-gin-nomatch' test
tests that case.
In addition to those two bug fixes, this removes some unnecessary locking,
following the principle laid out in the README. Because all items in
a posting tree have the same key value, a lock on the posting tree root is
enough to cover all the items. (With a very large posting tree, it would
possibly be better to lock the posting tree leaf pages instead, so that a
"skip scan" with a query like "A & B", you could avoid unnecessary conflict
if a new tuple is inserted with A but !B. But let's keep this simple.)
Also, some spelling fixes.
Author: Heikki Linnakangas with some editorization by me
Review: Andrey Borodin, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/0b3ad2c2-2692-62a9-3a04-5724f2af9114@iki.fi
If an interrupt arrives in the middle of FinishPreparedTransaction
and any callback decide to call CHECK_FOR_INTERRUPTS (e.g.
RemoveTwoPhaseFile can write a warning with ereport, which checks for
interrupts) then it's possible to leave current GXact undeleted.
Backpatch to all supported branches
Stas Kelvich
Discussion: ihttps://www.postgresql.org/message-id/3AD85097-A3F3-4EBA-99BD-C38EDF8D2949@postgrespro.ru
Recent gcc can warn about switch-case fall throughs that are not
explicitly labeled as intentional. This seems like a good thing,
so clean up the warnings exposed thereby by labeling all such
cases with comments that gcc will recognize.
In files that already had one or more suitable comments, I generally
matched the existing style of those. Otherwise I went with
/* FALLTHROUGH */, which is one of the spellings approved at the
more-restrictive-than-default level -Wimplicit-fallthrough=4.
(At the default level you can also spell it /* FALL ?THRU */,
and it's not picky about case. What you can't do is include
additional text in the same comment, so some existing comments
containing versions of this aren't good enough.)
Testing with gcc 8.0.1 (Fedora 28's current version), I found that
I also had to put explicit "break"s after elog(ERROR) or ereport(ERROR);
apparently, for this purpose gcc doesn't recognize that those don't
return. That seems like possibly a gcc bug, but it's fine because
in most places we did that anyway; so this amounts to a visit from the
style police.
Discussion: https://postgr.es/m/15083.1525207729@sss.pgh.pa.us
This change makes this module act more like most of our other low-level
resource management modules. It's a caller error if something is not
explicitly closed by the end of a successful transaction, so issue
a WARNING about it. This would not actually have caught the file leak
bug fixed in commit 231bcd080, because that was in a transaction-abort
path; but it still seems like a good, and pretty cheap, cross-check.
Discussion: https://postgr.es/m/152056616579.4966.583293218357089052@wrigleys.postgresql.org
After introducing usage of t_tid of inner or page high key for storing
number of attributes of tuple, validation of tuple's ItemPointer with
ItemPointerIsValid becomes incorrect, it's need to validate only blocknumber of
ItemPointer. Missing this causes a incorrect page deletion, fix that. Test is
added.
BTW, current contrib/amcheck doesn't fail on index corrupted by this way.
Also introduce BTreeTupleGetTopParent/BTreeTupleSetTopParent macroses to improve
code readability and to avoid possible confusion with page high key: high key
is used to store top-parent link for branch to remove.
Bug found by Michael Paquier, but bug doesn't exist in previous versions because
t_tid was set to P_HIKEY.
Author: Teodor Sigaev
Reviewer: Peter Geoghegan
Discussion: https://www.postgresql.org/message-id/flat/20180419052436.GA16000%40paquier.xyz
Remove an obsolete reference to the 'afteritem' argument, which was
removed by commit bc292937. Add a comment that clarifies how
_bt_insertonpg() indirectly handles the insertion of high key items.
Author: Peter Geoghegan
New WAL record XLOG_BTREE_META_CLEANUP introduced in 857f9c36 has no handling
in btree_desc() and btree_identify(). This patch implements corresponding
handling.
Alexander Korotkov
Add several assertions that ensure that we're dealing with a pivot tuple
without non-key attributes where that's expected. Also, remove the
assertion within _bt_isequal(), restoring the v10 function signature. A
similar check will be performed for the page highkey within
_bt_moveright() in most cases. Also avoid dropping all objects within
regression tests, to increase pg_dump test coverage for INCLUDE indexes.
Rather than using infrastructure that's generally intended to be used
with reference counted heap tuple descriptors during truncation, use the
same function that was introduced to store flat TupleDescs in shared
memory (we use a temp palloc'd buffer). This isn't strictly necessary,
but seems more future-proof than the old approach. It also lets us
avoid including rel.h within indextuple.c, which was arguably a
modularity violation. Also, we now call index_deform_tuple() with the
truncated TupleDesc, not the source TupleDesc, since that's more robust,
and saves a few cycles.
In passing, fix a memory leak by pfree'ing truncated pivot tuple memory
during CREATE INDEX. Also pfree during a page split, just to be
consistent.
Refactor _bt_check_natts() to be more readable.
Author: Peter Geoghegan with some editorization by me
Reviewed by: Alexander Korotkov, Teodor Sigaev
Discussion: https://www.postgresql.org/message-id/CAH2-Wz%3DkCWuXeMrBCopC-tFs3FbiVxQNjjgNKdG2sHxZ5k2y3w%40mail.gmail.com
Review of commit 1eb6d652: It's pointless to add padding to the GID fields,
when the code that follows assumes that there is no alignment, and uses
memcpy(). Remove the pointless padding.
Update comments to note the new fields in the WAL records.
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/33b787bf-dc20-1161-54e9-3f3b607bf59d%40iki.fi
spg_text_leaf_consistent() supposed that it should compare only
Min(querylen, entrylen) bytes of the two strings, and then deal with
any excess bytes in one string or the other by assuming the longer
string is greater if the prefixes are equal. Quite aside from the
fact that that's just wrong in some locales (e.g., 'ch' is not less
than 'd' in cs_CZ), it also risked passing incomplete multibyte
characters to strcoll(), with ensuing bad results.
Instead, just pass the full strings to varstr_cmp, and let it decide
what to do about unequal-length strings.
Fortunately, this error doesn't imply any index corruption, it's just
that searches might return the wrong set of entries.
Per report from Emre Hasegeli, though this is not his patch.
Thanks to Peter Geoghegan for review and discussion.
This code was born broken, so back-patch to all supported branches.
In HEAD, I failed to resist the temptation to do a bit of cosmetic
cleanup/pgindent'ing on 710d90da1, too.
Discussion: https://postgr.es/m/CAE2gYzzb6K51VnTq5i5p52z+j9p2duEa-K1T3RrC_GQEynAKEg@mail.gmail.com
Commit 16828d5c forgot to check that it had a set of missing values
before trying to retrieve a value from it.
An additional query to add coverage for this code is added to the
regression test.
Per bug report from Andreas Seltenreich.
This reverts commits d204ef6377,
83454e3c2b and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
The nextOid value is from the start of the checkpoint and may well be stale
compared to values from more recent XLOG_NEXTOID records. Previously, we
adopted it anyway, allowing the OID counter to go backwards during a crash.
While this should be harmless, it contributed to the severity of the bug
fixed in commit 0408e1ed5, by allowing duplicate TOAST OIDs to be assigned
immediately following a crash. Without this error, that issue would only
have arisen when TOAST objects just younger than a multiple of 2^32 OIDs
were deleted and then not vacuumed in time to avoid a conflict.
Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdOgWT2hHkYG3Wwo2cyZJq2zfs1FH0FgX-=h4OLosXHf9w@mail.gmail.com
When selecting a new OID, we take care to avoid picking one that's already
in use in the target table, so as not to create duplicates after the OID
counter has wrapped around. However, up to now we used SnapshotDirty when
scanning for pre-existing entries. That ignores committed-dead rows, so
that we could select an OID matching a deleted-but-not-yet-vacuumed row.
While that mostly worked, it has two problems:
* If recently deleted, the dead row might still be visible to MVCC
snapshots, creating a risk for duplicate OIDs when examining the catalogs
within our own transaction. Such duplication couldn't be visible outside
the object-creating transaction, though, and we've heard few if any field
reports corresponding to such a symptom.
* When selecting a TOAST OID, deleted toast rows definitely *are* visible
to SnapshotToast, and will remain so until vacuumed away. This leads to
a conflict that will manifest in errors like "unexpected chunk number 0
(expected 1) for toast value nnnnn". We've been seeing reports of such
errors from the field for years, but the cause was unclear before.
The fix is simple: just use SnapshotAny to search for conflicting rows.
This results in a slightly longer window before object OIDs can be
recycled, but that seems unlikely to create any large problems.
Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdOgWT2hHkYG3Wwo2cyZJq2zfs1FH0FgX-=h4OLosXHf9w@mail.gmail.com
This optimization was introduced in commit 2b272734. The changes include
some additional comments and documentation, and also these more
substantive changes:
. ensure the optimization is only applied on the leaf node of a tree
whose root is on level 2 or more. It's of little value on small trees.
. Delay calling RelationSetTargetBlock() until after the critical
section of _bt_insertonpg
. ensure the optimization is also applied to unlogged tables.
Pavan Deolasee and Peter Geoghegan with some very light editing from me.
Discussion: https://postgr.es/m/CABOikdO8jhRarNC60nZLktZYhxt+TK8z_V97+Ny499YQdyAfug@mail.gmail.com
The comment earlier in the function correctly states "and the insertion
key is strictly greater than the first key in this page". That is what
we check here, not "greater than or equal".
In commit 9c0a0de4c, I'd failed to notice that catalog/catalog.h
should also be considered a frontend-unsafe header, because it includes
(and needs) the full form of pg_class.h, not to mention relcache.h.
However, various frontend code was depending on it to get
TABLESPACE_VERSION_DIRECTORY, so refactoring of some sort is called for.
The cleanest answer seems to be to move TABLESPACE_VERSION_DIRECTORY,
as well as the OIDCHARS symbol, to common/relpath.h. Do that, and mop up
inclusions as necessary. (I found that quite a few current users of
catalog/catalog.h don't seem to need it at all anymore, apparently as a
result of the refactorings that created common/relpath.[hc]. And
initdb.c needed it only as a route to pg_class_d.h.)
Discussion: https://postgr.es/m/6629.1523294509@sss.pgh.pa.us
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
When an update moves a row between partitions (supported since
2f17844104), our normal logic for following update chains in READ
COMMITTED mode doesn't work anymore. Cross partition updates are
modeled as an delete from the old and insert into the new
partition. No ctid chain exists across partitions, and there's no
convenient space to introduce that link.
Not throwing an error in a partitioned context when one would have
been thrown without partitioning is obviously problematic. This commit
introduces infrastructure to detect when a tuple has been moved, not
just plainly deleted. That allows to throw an error when encountering
a deletion that's actually a move, while attempting to following a
ctid chain.
The row deleted as part of a cross partition update is marked by
pointing it's t_ctid to an invalid block, instead of self as a normal
update would. That was deemed to be the least invasive and most
future proof way to represent the knowledge, given how few infomask
bits are there to be recycled (there's also some locking issues with
using infomask bits).
External code following ctid chains should be updated to check for
moved tuples. The most likely consequence of not doing so is a missed
error.
Author: Amul Sul, editorialized by me
Reviewed-By: Amit Kapila, Pavan Deolasee, Andres Freund, Robert Haas
Discussion: http://postgr.es/m/CAAJ_b95PkwojoYfz0bzXU8OokcTVGzN6vYGCNVUukeUDrnF3dw@mail.gmail.com
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
Add a new WAL record type for TRUNCATE, which is only used when
wal_level >= logical. (For physical replication, TRUNCATE is already
replicated via SMGR records.) Add new callback for logical decoding
output plugins to receive TRUNCATE actions.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Hash index searches acquire predicate locks on the primary
page of a bucket. It acquires a lock on both the old and new buckets
for scans that happen concurrently with page splits. During a bucket
split, a predicate lock is copied from the primary page of an old
bucket to the primary page of a new bucket.
Author: Shubham Barai, Amit Kapila
Reviewed by: Amit Kapila, Alexander Korotkov, Thomas Munro
Discussion: https://www.postgresql.org/message-id/flat/CALxAEPvNsM2GTiXdRgaaZ1Pjd1bs+sxfFsf7Ytr+iq+5JJoYXA@mail.gmail.com
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
THis adds a "flags" field to the BackgroundWorkerInitializeConnection()
and BackgroundWorkerInitializeConnectionByOid(). For now only one flag,
BGWORKER_BYPASS_ALLOWCONN, is defined, which allows the worker to ignore
datallowconn.
857f9c36 bumps B-tree metapage version while upgrade is performed "on the fly"
when needed. However, some asserts fired when old version metapage was
cached to rel->rd_amcache. Despite new metadata fields are never used from
rel->rd_amcache, that needs to be fixed. This patch introduces metadata
upgrade during its caching, which fills unavailable fields with their default
values. contrib/pageinspect is also patched to handle non-upgraded metapages
in the same way.
Author: Alexander Korotkov
BRIN indexes like to propagate additions of free space into the upper pages
of their free space maps as soon as the new space is known, even when it's
just on one individual index page. Previously this required calling
FreeSpaceMapVacuum, which is quite an expensive thing if the map is large.
Use the FreeSpaceMapVacuumRange function recently added by commit c79f6df75
to reduce the amount of work done for this purpose.
Fix a couple of places that neglected to do the upper-page vacuuming at all
after recording new free space. If the policy is to be that BRIN should do
that, it should do it everywhere.
Do RecordPageWithFreeSpace unconditionally in brin_page_cleanup, and do
FreeSpaceMapVacuum unconditionally in brin_vacuum_scan. Because of the
FSM's imprecise storage of free space, the old complications here seldom
bought anything, they just slowed things down. This approach also
provides a predictable path for FSM corruption to be repaired.
Remove premature RecordPageWithFreeSpace call in brin_getinsertbuffer
where it's about to return an extended page to the caller. The caller
should do that, instead, after it's inserted its new tuple. Fix the
one caller that forgot to do so.
Simplify logic in brin_doupdate's same-page-update case by postponing
brin_initialize_empty_new_buffer to after the critical section; I see
little point in doing it before.
Avoid repeat calls of RelationGetNumberOfBlocks in brin_vacuum_scan.
Avoid duplicate BufferGetBlockNumber and BufferGetPage calls in
a couple of places where we already had the right values.
Move a BRIN_elog debug logging call out of a critical section; that's
pretty unsafe and I don't think it buys us anything to not wait till
after the critical section.
Move the "*extended = false" step in brin_getinsertbuffer into the
routine's main loop. There's no actual bug there, since the loop can't
iterate with *extended still true, but it doesn't seem very future-proof
as coded; and it's certainly not documented as a loop invariant.
This is all from follow-on investigation inspired by commit c79f6df75.
Discussion: https://postgr.es/m/5801.1522429460@sss.pgh.pa.us
Vacuum of index consists from two stages: multiple (zero of more) ambulkdelete
calls and one amvacuumcleanup call. When workload on particular table
is append-only, then autovacuum isn't intended to touch this table. However,
user may run vacuum manually in order to fill visibility map and get benefits
of index-only scans. Then ambulkdelete wouldn't be called for indexes
of such table (because no heap tuples were deleted), only amvacuumcleanup would
be called In this case, amvacuumcleanup would perform full index scan for
two objectives: put recyclable pages into free space map and update index
statistics.
This patch allows btvacuumclanup to skip full index scan when two conditions
are satisfied: no pages are going to be put into free space map and index
statistics isn't stalled. In order to check first condition, we store
oldest btpo_xact in the meta-page. When it's precedes RecentGlobalXmin, then
there are some recyclable pages. In order to check second condition we store
number of heap tuples observed during previous full index scan by cleanup.
If fraction of newly inserted tuples is less than
vacuum_cleanup_index_scale_factor, then statistics isn't considered to be
stalled. vacuum_cleanup_index_scale_factor can be defined as both reloption and GUC (default).
This patch bumps B-tree meta-page version. Upgrade of meta-page is performed
"on the fly": during VACUUM meta-page is rewritten with new version. No special
handling in pg_upgrade is required.
Author: Masahiko Sawada, Alexander Korotkov
Review by: Peter Geoghegan, Kyotaro Horiguchi, Alexander Korotkov, Yura Sokolov
Discussion: https://www.postgresql.org/message-id/flat/CAD21AoAX+d2oD_nrd9O2YkpzHaFr=uQeGr9s1rKC3O4ENc568g@mail.gmail.com
The prefix operator along with SP-GiST indexes can be used as an alternative
for LIKE 'word%' commands and it doesn't have a limitation of string/prefix
length as B-Tree has.
Bump catalog version
Author: Ildus Kurbangaliev with some editorization by me
Review by: Arthur Zakirov, Alexander Korotkov, and me
Discussion: https://www.postgresql.org/message-id/flat/20180202180327.222b04b3@wp.localdomain
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.comhttps://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Simon Riggs
Alvaro Herrera
Teodor Sigaev
Tom Lane
Magnus Hagander
Peter Eisentraut
Heikki Linnakangas
Andrew Dunstan
Stephen Frost
Andres Freund