special meaning of these terms in pg_hba.conf.
Also changes ugly pg_hba.conf IPv6 netmask of
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff to ::1/128.
Andrew Dunstan
modes (and replace the requiressl boolean). The four options were first
spelled out by Magnus Hagander <mha@sollentuna.net> on 2000-08-23 in email
to pgsql-hackers, archived here:
http://archives.postgresql.org/pgsql-hackers/2000-08/msg00639.php
My original less-flexible patch and the ensuing thread are archived at:
http://dbforums.com/t623845.html
Attached is a new patch, including documentation.
To sum up, there's a new client parameter "sslmode" and environment
variable "PGSSLMODE", with these options:
sslmode description
------- -----------
disable Unencrypted non-SSL only
allow Negotiate, prefer non-SSL
prefer Negotiate, prefer SSL (default)
require Require SSL
The only change to the server is a new pg_hba.conf line type,
"hostnossl", for specifying connections that are not allowed to use SSL
(for example, to prevent servers on a local network from accidentally
using SSL and wasting cycles). Thus the 3 pg_hba.conf line types are:
pg_hba.conf line types
----------------------
host applies to either SSL or regular connections
hostssl applies only to SSL connections
hostnossl applies only to regular connections
These client and server options, the postgresql.conf ssl = false option,
and finally the possibility of compiling with no SSL support at all,
make quite a range of combinations to test. I threw together a test
script to try many of them out. It's in a separate tarball with its
config files, a patch to psql so it'll announce SSL connections even in
absence of a tty, and the test output. The test is especially informative
when run on the same tty the postmaster was started on, so the FATAL:
errors during negotiation are interleaved with the psql client output.
I saw Tom write that new submissions for 7.4 have to be in before midnight
local time, and since I'm on the east coast in the US, this just makes it
in before the bell. :)
Jon Jensen
was modified for IPv6. Use a robust definition of struct sockaddr_storage,
do a proper configure test to see if ss_len exists, don't assume that
getnameinfo() will handle AF_UNIX sockets, don't trust getaddrinfo to
return the protocol we ask for, etc. This incorporates several outstanding
patches from Kurt Roeckx, but I'm to blame for anything that doesn't
work ...
---------------------------------------------------------------------------
here is a patch that allows CIDR netmasks in pg_hba.conf. It allows two
address/mask forms:
. address/maskbits, or
. address netmask (as now)
If the patch is accepted I will submit a documentation patch to cover
it.
This is submitted by agreement with Kurt Roeckx, who has worked on a
patch that covers this and other IPv6 issues.
address/mask forms:
. address/maskbits, or
. address netmask (as now)
If the patch is accepted I will submit a documentation patch to cover
it.
This is submitted by agreement with Kurt Roeckx, who has worked on a
patch that covers this and other IPv6 issues.
Andrew Dunstan
with variable-width fields. No more truncation of long user names.
Also, libpq can now send its environment-variable-driven SET commands
as part of the startup packet, saving round trips to server.
failing to find pg_hba.conf should be a fatal error anyway, so I
increased the priority of the elog() from LOG to FATAL and refactored
the code a little bit.
Neil Conway
postgresql version 7.3, but yea... this patch adds full IPv6
support to postgres. I've tested it out on 7.2.3 and has
been running perfectly stable.
CREDITS:
The KAME Project (Initial patch)
Nigel Kukard <nkukard@lbsd.net>
Johan Jordaan <johanj@lando.co.za>
A new pg_hba.conf column, USER
Allow specifiction of lists of users separated by commas
Allow group names specified by +
Allow include files containing lists of users specified by @
Allow lists of databases, and database files
Allow samegroup in database column to match group name matching dbname
Removal of secondary password files
Remove pg_passwd utility
Lots of code cleanup in user.c and hba.c
New data/global/pg_pwd format
New data/global/pg_group file
when to send what to which, prevent recursion by introducing new COMMERROR
elog level for client-communication problems, get rid of direct writes
to stderr in backend/libpq files, prevent non-error elogs from going to
client during the authentication cycle.
> pam_strerror() should be used a few more times, rather than just saying
> "Error!". Also, the configure.in snippet seems wrong. You add
> -I$pam_prefix/include/security to $INCLUDES and then you #include
> <security/pam_appl.h>. This whole thing is probably unnecessary, since
> PAM is a system library on the systems where it exists, so the headers
> and libraries are found automatically, unlike OpenSSL and
> Kerberos.
See attached revised patch. (I'm sure the configure.in stuff can be done
right/better, I'm just not enough of a autoconf guru to know what to
change it to.)
Dominic J. Eidson
Allow pg_shadow to be MD5 encrypted.
Add ENCRYPTED/UNENCRYPTED option to CREATE/ALTER user.
Add password_encryption postgresql.conf option.
Update wire protocol version to 2.1.
that call is not needed to prepare for SO_PEERCRED. Also, simplify code
so that #ifdef SO_PEERCRED appears in only one place, to make it easier
to support other platforms with variants of this capability.
points out how silly it is to use Autoconf to test for a preprocessor
symbol, when one can equally easily #ifdef on the symbol itself.
Accordingly, revert configure to prior state and do it that way.
system supports SO_PEERCRED requests for Unix sockets. This is an
amalgamation of patches submitted by Helge Bahmann and Oliver Elphick,
with some editorializing by yours truly.
number in the data structure so that we can give at least a minimally
useful idea of where the mistake is when we issue syntax error messages.
Move the ClientAuthentication() call to where it should have been in
the first place, so that postmaster memory releasing can happen in a
reasonable place also. Update obsolete comments, correct one real bug
(auth_argument was not picked up correctly).
are now separate files "postgres.h" and "postgres_fe.h", which are meant
to be the primary include files for backend .c files and frontend .c files
respectively. By default, only include files meant for frontend use are
installed into the installation include directory. There is a new make
target 'make install-all-headers' that adds the whole content of the
src/include tree to the installed fileset, for use by people who want to
develop server-side code without keeping the complete source tree on hand.
Cleaned up a whole lot of crufty and inconsistent header inclusions.
backend functions via backend PQexec(). The SPI interface has long
been our only documented way to do this, and the backend pqexec/portal
code is unused and suffering bit-rot. I'm putting it out of its misery.
running gcc and HP's cc with warnings cranked way up. Signed vs unsigned
comparisons, routines declared static and then defined not-static,
that kind of thing. Tedious, but perhaps useful...
When drawing up a very simple "text-drawing" of how the negotiation is done,
I realised I had done this last part (fallback) in a very stupid way. Patch
#4 fixes this, and does it in a much better way.
Included is also the simple text-drawing of how the negotiation is done.
//Magnus
have > 20000 users and each (potentially) needs a separate database
which is > only accessible to them. Rather than having 20000 lines
in pg_hba.conf, > I've patched Postgres so that the special token
"sameuser" in the > database field of pg_hba.conf allows access
only to the username which > is connecting.
a while back I posted a patch for pg_ident, the patch worked but I didn't
diagnose the problem properly.
on my compiler(gcc2.7.2) this compiles with no errors...
char buf[1000]; if(buf != '\0') {
...but it doesn't compare '\0' with the first char of buf.
What it does:
It solves stupid problem with cyrillic charsets IP-based on-fly recoding.
take a look at /data/charset.conf for details.
You can use any tables for any charset.
Tables are from Russian Apache project.
Tables in this patch contains also Ukrainian characters.
Then run ./configure --enable-recode
I've completed the patch to fix the protocol and authentication issues I
was discussing a couple of weeks ago. The particular changes are:
- the protocol has a version number
- network byte order is used throughout
- the pg_hba.conf file is used to specify what method is used to
authenticate a frontend (either password, ident, trust, reject, krb4
or krb5)
- support for multiplexed backends is removed
- appropriate changes to man pages
- the -a switch to many programs to specify an authentication service
no longer has any effect
- the libpq.so version number has changed to 1.1
The new backend still supports the old protocol so old interfaces won't
break.
Subject: [HACKERS] password authentication
This patch adds support for plaintext password authentication. To use
it, you add a line like
host all 0.0.0.0 0.0.0.0 password pg_pwd.conf
to your pg_hba.conf, where 'pg_pwd.conf' is the name of a file containing
the usernames and password hashes in the format of the first two fields
of a Unix /etc/passwd file. (Of course, you can use a specific database
name or IP instead.)
Then, to connect with a password through libpq, you use the PQconnectdb()
function, specifying the "password=" tag in the connect string and also
adding the tag "authtype=password".
I also added a command-line switch '-u' to psql that tells it to prompt
for a username and password and use password authentication.
another one in Solaris' port-protos.h.
The following patch will bring inet_aton's prototype into scope for
Ultrix to silence a compilation warning.
If the intention is to have inet_aton's prototype in its own header
filer, the declaration in Solaris' port-protos.h should be removed.
If the declaration in port-protos.h is deemed to be the correct
place, a declaration should be added in Ultrix' port-protos.h
regards
Erik Bertelsen
At least the first two should be fixed before the final release of 6.0.
1) There is a mismatch between the type declared in the catalog for
the input/output attributes of pg_type and the actual type of
values stored in the table. The type of typinput, typoutput,
typsend and typreceive are declared oid (26) while the values are
regproc (24). The error was there also in previous versions but
nobody noticed it until an Assert has been added in ExecEvalVar.
The effect is that it is now impossible to replace the typoutput
of existing data types with new procs.
2) The identd hba fails after the first time because the data read
from the identd socket is not zero-terminated and strlen reports
an incorrect length if the stack contains garbage, which usually
happens after the first connection has been made.
3) The new initdb wants to create itself the data directory. This
implies that the parent directory must be writable by postgres and
this may not always be desirable. A better solution would be to
allow the directory to be created by root and then filled by initdb.
It would also nice to have some reasonable default for PGLIB and
PGDATA like the previous version did. This applies also to the
postmaster executable.