Since its introduction, max_wal_senders is counted as part of
max_connections when it comes to define how many connection slots can be
used for replication connections with a WAL sender context. This can
lead to confusion for some users, as it could be possible to block a
base backup or replication from happening because other backend sessions
are already taken for other purposes by an application, and
superuser-only connection slots are not a correct solution to handle
that case.
This commit makes max_wal_senders independent of max_connections for its
handling of PGPROC entries in ProcGlobal, meaning that connection slots
for WAL senders are handled using their own free queue, like autovacuum
workers and bgworkers.
One compatibility issue that this change creates is that a standby now
requires to have a value of max_wal_senders at least equal to its
primary. So, if a standby created enforces the value of
max_wal_senders to be lower than that, then this could break failovers.
Normally this should not be an issue though, as any settings of a
standby are inherited from its primary as postgresql.conf gets normally
copied as part of a base backup, so parameters would be consistent.
Author: Alexander Kukushkin
Reviewed-by: Kyotaro Horiguchi, Petr Jelínek, Masahiko Sawada, Oleksii
Kliukin
Discussion: https://postgr.es/m/CAFh8B=nBzHQeYAu0b8fjK-AF1X4+_p6GRtwG+cCgs6Vci2uRuQ@mail.gmail.com
013ebc0a7b implements so-called GiST microvacuum. That is gistgettuple() marks
index tuples as dead when kill_prior_tuple is set. Later, when new tuple
insertion claims page space, those dead index tuples are physically deleted
from page. When this deletion is replayed on standby, it might conflict with
read-only queries. But 013ebc0a7b doesn't handle this. That may lead to
disappearance of some tuples from read-only snapshots on standby.
This commit implements resolving of conflicts between replay of GiST microvacuum
and standby queries. On the master we implement new WAL record type
XLOG_GIST_DELETE, which comprises necessary information. On stable releases
we've to be tricky to keep WAL compatibility. Information required for conflict
processing is just appended to data of XLOG_GIST_PAGE_UPDATE record. So,
PostgreSQL version, which doesn't know about conflict processing, will just
ignore that.
Reported-by: Andres Freund
Diagnosed-by: Andres Freund
Discussion: https://postgr.es/m/20181212224524.scafnlyjindmrbe6%40alap3.anarazel.de
Author: Alexander Korotkov
Backpatch-through: 9.6
Hexadecimal is consistently used as format to not bloat too much the
output but keep it readable. This information is useful mainly for
debugging purposes with for example pg_waldump.
Author: Michael Paquier
Reviewed-by: Nathan Bossart, Dmitry Dolgov, Andres Freund, Álvaro
Herrera
Discussion: https://postgr.es/m/20180413034734.GE1552@paquier.xyz
The "l" (ell) width spec means something in the corresponding scanf usage,
but not here. While modern POSIX says that applying "l" to "f" and other
floating format specs is a no-op, SUSv2 says it's undefined. Buildfarm
experience says that some old compilers emit warnings about it, and at
least one old stdio implementation (mingw's "ANSI" option) actually
produces wrong answers and/or crashes.
Discussion: https://postgr.es/m/21670.1526769114@sss.pgh.pa.us
Discussion: https://postgr.es/m/c085e1da-0d64-1c15-242d-c921f32e0d5c@dunslane.net
New WAL record XLOG_BTREE_META_CLEANUP introduced in 857f9c36 has no handling
in btree_desc() and btree_identify(). This patch implements corresponding
handling.
Alexander Korotkov
Review of commit 1eb6d652: It's pointless to add padding to the GID fields,
when the code that follows assumes that there is no alignment, and uses
memcpy(). Remove the pointless padding.
Update comments to note the new fields in the WAL records.
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/33b787bf-dc20-1161-54e9-3f3b607bf59d%40iki.fi
In commit 9c0a0de4c, I'd failed to notice that catalog/catalog.h
should also be considered a frontend-unsafe header, because it includes
(and needs) the full form of pg_class.h, not to mention relcache.h.
However, various frontend code was depending on it to get
TABLESPACE_VERSION_DIRECTORY, so refactoring of some sort is called for.
The cleanest answer seems to be to move TABLESPACE_VERSION_DIRECTORY,
as well as the OIDCHARS symbol, to common/relpath.h. Do that, and mop up
inclusions as necessary. (I found that quite a few current users of
catalog/catalog.h don't seem to need it at all anymore, apparently as a
result of the refactorings that created common/relpath.[hc]. And
initdb.c needed it only as a route to pg_class_d.h.)
Discussion: https://postgr.es/m/6629.1523294509@sss.pgh.pa.us
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
Add a new WAL record type for TRUNCATE, which is only used when
wal_level >= logical. (For physical replication, TRUNCATE is already
replicated via SMGR records.) Add new callback for logical decoding
output plugins to receive TRUNCATE actions.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
Coverity complained about possible buffer overrun in two places added by
commit 1eb6d6527, and AFAICS it's reasonable to worry: even granting that
the WAL originator properly truncated the commit GID to GIDSIZE, we should
not really bet our lives on that having the same value as it does in the
current build. Hence, use strlcpy() not strcpy(), and adjust the pointer
advancement logic to be sure we skip over the whole source string even if
strlcpy() truncated it.
Store GID of 2PC in commit/abort WAL records when wal_level = logical.
This allows logical decoding to send the SAME gid to subscribers
across restarts of logical replication.
Track relica origin replay progress for 2PC.
(Edited from patch 0003 in the logical decoding 2PC series.)
Authors: Nikhil Sontakke, Stas Kelvich
Reviewed-by: Simon Riggs, Andres Freund
Since commit 40dae7ec53, which changed the way b-tree page splitting
works, there has been no difference in the handling of root, and non-root
split WAL records. We don't need to distinguish them anymore
If you're worried about the loss of debugging information, note that
usually a root split record will normally be followed by a WAL record to
create the new root page. The root page will also have the BTP_ROOT flag
set on the page itself, and there is a pointer to it from the metapage.
Author: Aleksander Alekseev
Discussion: https://www.postgresql.org/message-id/20170406122116.GA11081@e733.localdomain
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
When the BRIN summary tuple for a page range becomes too "wide" for the
values actually stored in the table (because the tuples that were
present originally are no longer present due to updates or deletes), it
can be useful to remove the outdated summary tuple, so that a future
summarization can install a tighter summary.
This commit introduces a SQL-callable interface to do so.
Author: Álvaro Herrera
Reviewed-by: Eiji Seki
Discussion: https://postgr.es/m/20170228045643.n2ri74ara4fhhfxf@alvherre.pgsql
Most seriously, fix use of incorrect block ID, per a report from
Jeff Janes that it causes a crash and a diagnosis from Amit Kapila.
Improve consistency between the hash and btree versions of this
code by adding back a PANIC that btree has, and by registering
data in the xlog record in the same way, per complaints from
Jeff Janes and Amit Kapila.
Tidy up some minor cosmetic points, per complaints from Amit
Kapila.
Patch by Ashutosh Sharma, reviewed by Amit Kapila, and tested by
Jeff Janes.
Discussion: http://postgr.es/m/CAMkU=1w-9Qe=Ff1o6bSaXpNO9wqpo7_9GL8_CVhw4BoVVHasqg@mail.gmail.com
This provides infrastructure for looking up arbitrary, user-supplied
XIDs without a risk of scary-looking failures from within the clog
module. Normally, the oldest XID that can be safely looked up in CLOG
is the same as the oldest XID that can reused without causing
wraparound, and the latter is already tracked. However, while
truncation is in progress, the values are different, so we must
keep track of them separately.
Craig Ringer, reviewed by Simon Riggs and by me.
Discussion: http://postgr.es/m/CAMsr+YHQiWNEi0daCTboS40T+V5s_+dst3PYv_8v2wNVH+Xx4g@mail.gmail.com
Clear LH_PAGE_HAS_DEAD_TUPLES during replay, similar to what gets done
for btree. Update hashdesc.c for xl_hash_vacuum_one_page.
Oversights in commit 6977b8b7f4 spotted
by Amit Kapila. Patch by Ashutosh Sharma.
Bump WAL version. The original patch to make hash indexes write-ahead
logged probably should have done this, and the single page vacuuming
patch probably should have done it again, but better late than never.
Discussion: http://postgr.es/m/CAA4eK1Kd=mJ9xreovcsh0qMiAj-QqCphHVQ_Lfau1DR9oVjASQ@mail.gmail.com
The warning about hash indexes not being write-ahead logged and their
use being discouraged has been removed. "snapshot too old" is now
supported for tables with hash indexes. Most importantly, barring
bugs, hash indexes will now be crash-safe and usable on standbys.
This commit doesn't yet add WAL consistency checking for hash
indexes, as we now have for other index types; a separate patch has
been submitted to cure that lack.
Amit Kapila, reviewed and slightly modified by me. The larger patch
series of which this is a part has been reviewed and tested by Álvaro
Herrera, Ashutosh Sharma, Mark Kirkwood, Jeff Janes, and Jesper
Pedersen.
Discussion: http://postgr.es/m/CAA4eK1JOBX=YU33631Qh-XivYXtPSALh514+jR8XeD7v+K3r_Q@mail.gmail.com
The xlog-specific headers need to be included in both frontend code -
specifically, pg_waldump - and the backend, but the remainder of the
private headers for each index are only needed by the backend. By
splitting the xlog stuff out into separate headers, pg_waldump pulls
in fewer backend headers, which is a good thing.
Patch by me, reviewed by Michael Paquier and Andres Freund, per a
complaint from Dilip Kumar.
Discussion: http://postgr.es/m/CA+TgmoZ=F=GkxV0YEv-A8tb+AEGy_Qa7GSiJ8deBKFATnzfEug@mail.gmail.com
When the new GUC wal_consistency_checking is set to a non-empty value,
it triggers recording of additional full-page images, which are
compared on the standby against the results of applying the WAL record
(without regard to those full-page images). Allowable differences
such as hints are masked out, and the resulting pages are compared;
any difference results in a FATAL error on the standby.
Kuntal Ghosh, based on earlier patches by Michael Paquier and Heikki
Linnakangas. Extensively reviewed and revised by Michael Paquier and
by me, with additional reviews and comments from Amit Kapila, Álvaro
Herrera, Simon Riggs, and Peter Eisentraut.
If a user requests the commit timestamp for a transaction old enough
that its data is concurrently being truncated away by vacuum at just the
right time, they would receive an ugly internal file-not-found error
message from slru.c rather than the expected NULL return value.
In a primary server, the window for the race is very small: the lookup
has to occur exactly between the two calls by vacuum, and there's not a
lot that happens between them (mostly just a multixact truncate). In a
standby server, however, the window is larger because the truncation is
executed as soon as the WAL record for it is replayed, but the advance
of the oldest-Xid is not executed until the next checkpoint record.
To fix in the primary, simply reverse the order of operations in
vac_truncate_clog. To fix in the standby, augment the WAL truncation
record so that the standby is aware of the new oldest-XID value and can
apply the update immediately. WAL version bumped because of this.
No backpatch, because of the low importance of the bug and its rarity.
Author: Craig Ringer
Reviewed-By: Petr Jelínek, Peter Eisentraut
Discussion: https://postgr.es/m/CAMsr+YFhVtRQT1VAwC+WGbbxZZRzNou=N9Ed-FrCqkwQ8H8oJQ@mail.gmail.com
Previously gin_desc() displayed incorrect output "unknown action 0"
for XLOG_GIN_INSERT and XLOG_GIN_VACUUM_DATA_LEAF_PAGE records with
valid actions. The cause of this problem was that gin_desc() wrongly
used XLogRecGetData() to extract data from those records.
Since they were registered by XLogRegisterBufData(), gin_desc() should
have used XLogRecGetBlockData(), instead, like gin_redo().
Also there were other differences about how to treat XLOG_GIN_INSERT
record between gin_desc() and gin_redo().
This commit fixes gin_desc() routine so that it treats those records
in the same way as gin_redo().
Batch-patch to 9.5 where WAL record format was revamped and
XLogRegisterBufData() was added.
Reported-By: Andres Freund
Reviewed-By: Tom Lane
Discussion: <20160509194645.7lewnpw647zegx2m@alap3.anarazel.de>
Apparent copy-and-pasteo in standby_desc_invalidations() had two
entries for msg->id == SHAREDINVALRELMAP_ID.
Aleksander Alekseev
Discussion: <20160923090814.GB1238@e733>
Since the hash AM is going to be revamped to have WAL, this is a good
opportunity to clean up the include file a little bit to avoid including
a lot of extra stuff in the future.
Author: Amit Kapila
Since a892234 & fd31cd265 the visibilitymap's freeze bit is used to
avoid vacuuming the whole relation in anti-wraparound vacuums. Doing so
correctly relies on not adding xids to the heap without also unsetting
the visibilitymap flag. Tuple locking related code has not done so.
To allow selectively resetting all-frozen - to avoid pessimizing
heap_lock_tuple - allow to selectively reset the all-frozen with
visibilitymap_clear(). To avoid having to use
visibilitymap_get_status (e.g. via VM_ALL_FROZEN) inside a critical
section, have visibilitymap_clear() return whether any bits have been
reset.
There's a remaining issue (denoted by XXX): After the PageIsAllVisible()
check in heap_lock_tuple() and heap_lock_updated_tuple_rec() the page
status could theoretically change. Practically that currently seems
impossible, because updaters will hold a page level pin already. Due to
the next beta coming up, it seems better to get the required WAL magic
bump done before resolving this issue.
The added flags field fields to xl_heap_lock and xl_heap_lock_updated
require bumping the WAL magic. Since there's already been a catversion
bump since the last beta, that's not an issue.
Reviewed-By: Robert Haas, Amit Kapila and Andres Freund
Author: Masahiko Sawada, heavily revised by Andres Freund
Discussion: CAEepm=3fWAbWryVW9swHyLTY4sXVf0xbLvXqOwUoDiNCx9mBjQ@mail.gmail.com
Backpatch: -
This requires some core changes as well so that we can properly
WAL-log the truncation. Specifically, it changes the format of the
XLOG_SMGR_TRUNCATE WAL record, so bump XLOG_PAGE_MAGIC.
Patch by me, reviewed but not fully endorsed by Andres Freund.
So far, when a transaction with pending invalidations, but without an
assigned xid, committed, we simply ignored those invalidation
messages. That's problematic, because those are actually sent for a
reason.
Known symptoms of this include that existing sessions on a hot-standby
replica sometimes fail to notice new concurrently built indexes and
visibility map updates.
The solution is to WAL log such invalidations in transactions without an
xid. We considered to alternatively force-assign an xid, but that'd be
problematic for vacuum, which might be run in systems with few xids.
Important: This adds a new WAL record, but as the patch has to be
back-patched, we can't bump the WAL page magic. This means that standbys
have to be updated before primaries; otherwise
"PANIC: standby_redo: unknown op code 32" errors can be encountered.
XXX:
Reported-By: Васильев Дмитрий, Masahiko Sawada
Discussion:
CAB-SwXY6oH=9twBkXJtgR4UC1NqT-vpYAtxCseME62ADwyK5OA@mail.gmail.comCAD21AoDpZ6Xjg=gFrGPnSn4oTRRcwK1EBrWCq9OqOHuAcMMC=w@mail.gmail.com
API and mechanism to allow generic messages to be inserted into WAL that are
intended to be read by logical decoding plugins. This commit adds an optional
new callback to the logical decoding API.
Messages are either text or bytea. Messages can be transactional, or not, and
are identified by a prefix to allow multiple concurrent decoding plugins.
(Not to be confused with Generic WAL records, which are intended to allow crash
recovery of extensible objects.)
Author: Petr Jelinek and Andres Freund
Reviewers: Artur Zakirov, Tomas Vondra, Simon Riggs
Discussion: 5685F999.6010202@2ndquadrant.com
This interface is designed to give an access to WAL for extensions which
could implement new access method, for example. Previously it was
impossible because restoring from custom WAL would need to access system
catalog to find a redo custom function. This patch suggests generic way
to describe changes on page with standart layout.
Bump XLOG_PAGE_MAGIC because of new record type.
Author: Alexander Korotkov with a help of Petr Jelinek, Markus Nullmeier and
minor editorization by my
Reviewers: Petr Jelinek, Alvaro Herrera, Teodor Sigaev, Jim Nasby,
Michael Paquier
The distinction between "archive" and "hot_standby" existed only because
at the time "hot_standby" was added, there was some uncertainty about
stability. This is now a long time ago. We would like to move forward
with simplifying the replication configuration, but this distinction is
in the way, because a primary server cannot tell (without asking a
standby or predicting the future) which one of these would be the
appropriate level.
Pick a new name for the combined setting to make it clearer that it
covers all (non-logical) backup and replication uses. The old values
are still accepted but are converted internally.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: David Steele <david@pgmasters.net>
NextXID has been rendered in the form of a pg_lsn even though it
really is not. This can cause confusion, so change the format from
%u/%u to %u:%u, per discussion on hackers.
Complaint by me, patch by me and Bruce, reviewed by Michael Paquier
and Alvaro. Applied to HEAD only.
Author: Joe Conway, Bruce Momjian
Reviewed-by: Michael Paquier, Alvaro Herrera
Backpatch-through: master
Replay of XLOG_BTREE_VACUUM during Hot Standby was previously thought to require
complex interlocking that matched the requirements on the master. This required
an O(N) operation that became a significant problem with large indexes, causing
replication delays of seconds or in some cases minutes while the
XLOG_BTREE_VACUUM was replayed.
This commit skips the “pin scan” that was previously required, by observing in
detail when and how it is safe to do so, with full documentation. The pin scan
is skipped only in replay; the VACUUM code path on master is not touched here.
The current commit still performs the pin scan for toast indexes, though this
can also be avoided if we recheck scans on toast indexes. Later patch will
address this.
No tests included. Manual tests using an additional patch to view WAL records
and their timing have shown the change in WAL records and their handling has
successfully reduced replication delay.
The variables newestCommitTs and oldestCommitTs sound as if they are
timestamps, but in fact they are the transaction Ids that correspond
to the newest and oldest timestamps rather than the actual timestamps.
Rename these variables to reflect that they are actually xids: to wit
newestCommitTsXid and oldestCommitTsXid respectively. Also modify
related code in a similar fashion, particularly the user facing output
emitted by pg_controldata and pg_resetxlog.
Complaint and patch by me, review by Tom Lane and Alvaro Herrera.
Backpatch to 9.5 where these variables were first introduced.