Between v15 and now, this function's "else if" chain grew from 252 lines
to 592 lines, exceeding a compiler limit that manifests as "fatal error
C1026: parser stack overflow, program too complex (compiling source file
src/backend/nodes/readfuncs.c)". Use "if (...) return ...;" instead.
Reviewed by Tom Lane, Peter Eisentraut and Michael Paquier. Not all
reviewers endorse this.
Discussion: https://postgr.es/m/20230607185458.GA1334487@rfd.leadboat.com
47bb9db75 modified the ApplyRetrieveRule()'s conversion of a view's
original RTE_RELATION entry into an RTE_SUBQUERY one to retain relid,
rellockmode, and perminfoindex so that the executor can lock the view
and check its permissions. It seems better to also retain
relkind for cross-checking that the exception of an
RTE_SUBQUERY entry being allowed to carry relation details only
applies to views, so do so.
Bump catversion because this changes the output format of
RTE_SUBQUERY RTEs.
Suggested-by: David Steele <david@pgmasters.net>
Reviewed-by: David Steele <david@pgmasters.net>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/3953179e-9540-e5d1-a743-4bef368785b0%40pgmasters.net
The issue fixed in commit bfd332b3f can also bite Memoize plans,
because of the separate copies of lateral reference Vars made
by paraminfo_get_equal_hashops. Apply the same hacky fix there.
(In passing, clean up shaky grammar in the existing comments
for this function.)
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-krwk0Wbd6WdufMAupuou_Ua73ijQ4XQCr1Mb5BaVtKQ@mail.gmail.com
rewriteRuleAction neglected to check for SubLink nodes in the
securityQuals of range table entries. This could lead to failing
to convert such a SubLink to a SubPlan, resulting in assertion
crashes or weird errors later in planning.
In passing, fix some poor coding in rewriteTargetView:
we should not pass the source parsetree's hasSubLinks
field to ReplaceVarsFromTargetList's outer_hasSubLinks.
ReplaceVarsFromTargetList knows enough to ignore that
when a Query node is passed, but it's still confusing
and bad precedent: if we did try to update that flag
we'd be updating a stale copy of the parsetree.
Per bug #17972 from Alexander Lakhin. This has been broken since
we added RangeTblEntry.securityQuals (although the presented test
case only fails back to 215b43cdc), so back-patch all the way.
Discussion: https://postgr.es/m/17972-f422c094237847d0@postgresql.org
Previously stats in the startup process would only get reported during
shutdown of the startup process. It has been that way for a long time, but
became a lot more noticeable with the new pg_stat_io view, which separates out
IO done by different backend types...
While replaying after every XLOG_RUNNING_XACTS isn't the prettiest approach,
it has the advantage of being quite easy. Given that we're well past feature
freeze...
It's not a problem that we don't report stats more frequently with
wal_level=minimal, in that case stats can't be read before the stats process
has shut down.
Besides the above, this commit also changes pgstat_report_stat() to acquire
the timestamp with GetCurrentTimestamp() instead of
GetCurrentTransactionStopTimestamp().
Thanks to Melih Mutlu, Kyotaro Horiguchi for prototypes of other approaches to
solving this issue.
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/5315aedc-fbca-1556-c5de-dc2e00b23a14@oss.nttdata.com
Commit 927d9abb6 purported to make datetime() accept any string
that could be output for a datetime value by to_jsonb(). But it
overlooked the possibility of fractional seconds being present,
so that cases as simple as to_jsonb(now()) would defeat it.
Fix by adding formats that include ".US" to the list in
executeDateTimeMethod(). (Note that while this is nominally
microseconds, it'll do the right thing for fractions with
fewer than six digits.)
In passing, re-order the list to restore the datatype ordering
specified in its comment. The violation accidentally did not
break anything; but the next edit might be less lucky, so add
more comments.
Per report from Tim Field. Back-patch to v13 where datetime()
was added, like the previous patch.
Discussion: https://postgr.es/m/014A028B-5CE6-4FDF-AC24-426CA6FC9CEE@mohiohio.com
We had left it icon-free since users won't achieve much by opening it
from Windows Explorer. Subsequent to that decision, Task Manager
started to show the icon. That shifts the balance in favor of attaching
the icon, so do so. No back-patch, but make this late addition to v16.
Reviewed by Andres Freund and Magnus Hagander.
Discussion: https://postgr.es/m/20230608014507.GD1334487@rfd.leadboat.com
If we apply outer join identity 3 when relation C is a subquery
having lateral references to relation B, then the lateral references
within C continue to bear the original syntactically-correct
varnullingrels marks, but that won't match what is available from
the outer side of the nestloop. Compensate for that in
process_subquery_nestloop_params(). This is a slightly hacky fix,
but we certainly don't want to re-plan C in toto for each possible
outer join order, so there's not a lot of better alternatives.
Richard Guo and Tom Lane, per report from Markus Winand
Discussion: https://postgr.es/m/DFBB2D25-DE97-49CA-A60E-07C881EA59A7@winand.at
- Commit 3eb77eba5a, which moved the pending ops queue from md.c to
sync.c, introduced a duplicate, unused 'pendingOpsCxt'
variable. (I'm surprised none of the compilers or static analysis
tools have complained about that.)
- Commit c2fe139c20 moved the 'synchronize_seqscans' variable and
introduced an extern declaration in tableam.h, making the one in
guc_tables.c unnecessary.
- Commit 6f0cf87872 removed the 'pgstat_temp_directory' GUC, but
forgot to remove the corresponding global variable.
- Commit 1b4e729eaa removed the 'pg_krb_realm' GUC, and its global
variable, but forgot the declaration in auth.h.
Spotted all these by reading the code.
As reported by buildfarm member conchuela, one of the regression tests
added by 558c9d7 is having some ordering issues. This commit adds an
ORDER BY clause to make the output more stable for the problematic
query.
Fix suggested by Tom Lane. The plan of the query updated still uses a
parallel hash full join.
Author: Melanie Plageman
Discussion: https://postgr.es/m/623596.1684541098@sss.pgh.pa.us
Split nbtree's _bt_getbuf function is two: code that read locks or write
locks existing pages remains in _bt_getbuf, while code that deals with
allocating new pages is moved to a new, dedicated function called
_bt_allocbuf. This simplifies most _bt_getbuf callers, since it is no
longer necessary for them to pass a heaprel argument. Many of the
changes to nbtree from commit 61b313e4 can be reverted. This minimizes
the divergence between HEAD/PostgreSQL 16 and earlier release branches.
_bt_allocbuf replaces the previous nbtree idiom of passing P_NEW to
_bt_getbuf. There are only 3 affected call sites, all of which continue
to pass a heaprel for recovery conflict purposes. Note that nbtree's
use of P_NEW was superficial; nbtree never actually relied on the P_NEW
code paths in bufmgr.c, so this change is strictly mechanical.
GiST already took the same approach; it has a dedicated function for
allocating new pages called gistNewBuffer(). That factor allowed commit
61b313e4 to make much more targeted changes to GiST.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CAH2-Wz=8Z9qY58bjm_7TAHgtW6RzZ5Ke62q5emdCEy9BAzwhmg@mail.gmail.com
Eventually it is likely worth trying to deal with this in a more expansive
way, by generating dependency files generated within the scripts. But it's not
entirely obvious how to do that in perl and is work more suitable for 17
anyway.
Reported-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tristan Partin <tristan@neon.tech>
Discussion: https://postgr.es/m/87v8g7s6bf.fsf@wibble.ilmari.org
While executing maintenance operations (ANALYZE, CLUSTER, REFRESH
MATERIALIZED VIEW, REINDEX, or VACUUM), set search_path to
'pg_catalog, pg_temp' to prevent inconsistent behavior.
Functions that are used for functional indexes, in index expressions,
or in materialized views and depend on a different search path must be
declared with CREATE FUNCTION ... SET search_path='...'.
This change addresses a security risk introduced in commit 60684dd834,
where a role with MAINTAIN privileges on a table may be able to
escalate privileges to the table owner. That commit is not yet part of
any release, so no need to backpatch.
Discussion: https://postgr.es/m/e44327179e5c9015c8dda67351c04da552066017.camel%40j-davis.com
Reviewed-by: Greg Stark
Reviewed-by: Nathan Bossart
The same routine to check if a specific pattern can be found in the
server logs was copied over four different test scripts. This refactors
the whole to use a single routine located in PostgreSQL::Test::Cluster,
named log_contains, to grab the contents of the server logs and check
for a specific pattern.
On HEAD, the code previously used assumed that slurp_file() could not
handle an undefined offset, setting it to zero, but slurp_file() does
do an extra fseek() before retrieving the log contents only if an offset
is defined. In two places, the test was retrieving the full log
contents with slurp_file() after calling substr() to apply an offset,
ignoring that slurp_file() would be able to handle that.
Backpatch all the way down to ease the introduction of new tests that
could rely on the new routine.
Author: Vignesh C
Reviewed-by: Andrew Dunstan, Dagfinn Ilmari Mannsåker, Michael Paquier
Discussion: https://postgr.es/m/CALDaNm0YSiLpjCmajwLfidQrFOrLNKPQir7s__PeVvh9U3uoTQ@mail.gmail.com
Backpatch-through: 11
Commit 482675987 introduced "run_as_owner" subscription option so that
subscription runs with either the permissions of the subscription
owner or the permission of the table owner. However, tablesync workers
did not use this option for the initial data copy.
With this change, tablesync workers run with appropriate permissions
based on "run_as_owner" option.
Ajin Cherian, with changes and regression tests added by me.
Reported-By: Amit Kapila
Author: Ajin Cherian, Masahiko Sawada
Reviewed-by: Ajin Cherian, Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1L=qzRHPEn+qeMoKQGFBzqGoLBzt_ov0A89iFFiut+ppA@mail.gmail.com
This commit refactors a bit the code in charge of checking for log
patterns when connections fail or succeed, by moving the log pattern
checks into their own routine, for clarity. This has come up as
something to improve while discussing the refactoring of find_in_log().
Backpatch down to 14 where these routines are used, to ease the
introduction of new tests that could rely on them.
Author: Vignesh C, Michael Paquier
Discussion: https://postgr.es/m/CALDaNm0YSiLpjCmajwLfidQrFOrLNKPQir7s__PeVvh9U3uoTQ@mail.gmail.com
Backpatch-through: 14
A placeholder that references the outer join's relid in ph_eval_at
is logically "above" the join, and therefore we can't remove its
PlaceHolderInfo: it might still be used somewhere in the query.
This was not an issue pre-v16 because we failed to remove the join
at all in such cases. The new outer-join-aware-Var infrastructure
permits deducing that it's okay to remove the join, but then we
have to clean up correctly afterwards.
Report and fix by Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_tuVn9EwwMcggGiZJWWstdXX_ci8FeEU17vs+4nLgw3w@mail.gmail.com
Apparently some extensions are in the habit of calling
ChangeVarNodes() with INDEX_VAR as the rt_index to replace.
That worked before 2489d76c4, at least as long as there were
not PlaceHolderVars in the expression; but now it fails
because bms_is_member spits up. Add a test to avoid that.
Per report from Anton Melnikov, though this is not his
proposed patch.
Discussion: https://postgr.es/m/5b370a46-f6d2-373d-9dbc-0d55250e82c1@inbox.ru
pg_base64_enc_len() and its clones overestimated the output
length by up to 2 bytes, as a result of sloppy thinking about
where to divide. No callers require a precise estimate, so
this has no consequences worse than palloc'ing a byte or two
more than necessary. We might as well get it right though.
This bug is very ancient, dating to commit 79d78bb26 which
added encode.c. (The other instances were presumably copied
from there.) Still, it doesn't quite seem worth back-patching.
Oleg Tselebrovskiy
Discussion: https://postgr.es/m/f94da55286a63022150bc266afdab754@postgrespro.ru
677319746 added support for making use of MSVC's bit scanning functions.
However, that commit failed to consider 32-bit MSVC builds where the
64-bit versions of these functions are unavailable. This resulted in
compilation failures on 32-bit MSVC.
Here we adjust the code so we fall back on the manual way of finding the
bit positions for 64-bit integers when building on 32-bit MSVC.
Bug: #17967
Reported-by: Youmiu Mo
Discussion: https://postgr.es/m/17967-cd21e34a314141b2@postgresql.org
Commit fc22b6623b (generated columns) replaced ExecGetUpdatedCols() with
ExecGetAllUpdatedCols() in a couple places handling UPDATE (triggers and
lock mode). However, ExecGetUpdatedCols() did exec_rt_fetch() while
ExecGetAllUpdatedCols() also allocates memory through bms_union()
without paying attention to the memory context and happened to use the
long-lived ExecutorState, leaking the memory until the end of the query.
The amount of leaked memory is proportional to the number of (updated)
attributes, types of UPDATE triggers, and the number of processed rows
(which for UPDATE ... FROM ... may be much higher than updated rows).
Fixed by switching to the per-tuple context in GetAllUpdatedColumns().
This is fine for all in-core callers, but external callers may need to
copy the result. But we're not aware of any such callers.
Note the issue was introduced by fc22b6623b, but the macros were later
renamed by f50e888990.
Backpatch to 12, where the issue was introduced.
Reported-by: Tomas Vondra
Reviewed-by: Andres Freund, Tom Lane, Jakub Wartak
Backpatch-through: 12
Discussion: https://postgr.es/m/222a3442-7f7d-246c-ed9b-a76209d19239@enterprisedb.com
The GUC settings lc_collate and lc_ctype are from a time when those
locale settings were cluster-global. When those locale settings were
made per-database (PG 8.4), the settings were kept as read-only. As
of PG 15, you can use ICU as the per-database locale provider, so
examining these settings is already less meaningful and possibly
confusing, since you need to look into pg_database to find out what is
really happening, and they would likely become fully obsolete in the
future anyway.
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://www.postgresql.org/message-id/696054d1-bc88-b6ab-129a-18b8bce6a6f0@enterprisedb.com
The apply worker was not reloading the configuration while processing
messages if there is a continuous flow of messages from upstream. It was
also not reloading the configuration if there is a change in the
configuration after it has waited for the message and before receiving the
new replication message. This can lead to failure in tests because we
expect that after reload, the behavior of apply worker to respect the
changed GUCs.
We found this while analyzing a rare buildfarm failure.
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB5716AF9079CC0755CD015322947E9@OS0PR01MB5716.jpnprd01.prod.outlook.com
A new-style SQL function can contain a parse-time dependency
on a unique index, much as views and matviews can (such cases
arise from GROUP BY and ON CONFLICT clauses, for example).
To dump and restore such a function successfully, pg_dump must
postpone the function until after the unique index is created,
which will happen in the post-data part of the dump. Therefore
we have to remove the normal constraint that functions are
dumped in pre-data. Add code similar to the existing logic
that handles this for matviews. I added test cases for both
as well, since code coverage tests showed that we weren't
testing the matview logic.
Per report from Sami Imseih. Back-patch to v14 where
new-style SQL functions came in.
Discussion: https://postgr.es/m/2C1933AB-C2F8-499B-9D18-4AC1882256A0@amazon.com
Two places in pg_dump_sort.c were using pg_log_info() to add
more details to a message printed with pg_log_warning().
This is bad, because at default verbosity level we would
print the warning line but not the details. One should use
pg_log_warning_detail() or pg_log_warning_hint() instead.
Commit 9a374b77f got rid of most such abuses, but unaccountably
missed these.
Noted while studying a bug report from Sami Imseih.
Back-patch to v15 where 9a374b77f came in. (Prior versions
don't have the missing-details misbehavior, for reasons
I didn't bother to track down.)
Discussion: https://postgr.es/m/2C1933AB-C2F8-499B-9D18-4AC1882256A0@amazon.com
When we're deleting a no-op LEFT JOIN from the query, we must remove
the join's joinclauses from surviving relations' joininfo lists.
The invention of "cloned" clauses in 2489d76c4 broke the logic for
that; it'd fail to remove clones that include OJ relids outside the
doomed join's min relid sets, which could happen if that join was
previously discovered to commute with some other join.
This accidentally failed to cause problems in the majority of cases,
because we'd never decide that such a cloned clause was evaluatable at
any surviving join. However, Richard Guo discovered a case where that
did happen, leading to "no relation entry for relid" errors later.
Also, adding assertions that a non-removed clause contains no Vars from
the doomed join exposes that there are quite a few existing regression
test cases where the problem happens but is accidentally not exposed.
The fix for this is just to include the target join's commute_above_r
and commute_below_l sets in the relid set we test against when
deciding whether a join clause is "pushed down" and thus not
removable.
While at it, do a little refactoring: the join's relid set can be
computed inside remove_rel_from_query rather than in the caller.
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/CAMbWs4_PHrRqTKDNnTRsxxQy6BtYCVKsgXm1_gdN2yQ=kmcO5g@mail.gmail.com
Avoid "right sibling's left-link doesn't match" errors when vacuuming a
corrupt nbtree index. Just LOG the issue and press on. That way VACUUM
will have a decent chance of finishing off all required processing for
the index (and for the table as a whole).
This error was seen in the field from time to time (it's more than a
theoretical risk), so giving VACUUM the ability to press on like this
has real value. Nothing short of a REINDEX is expected to fix the
underlying index corruption, so giving up (by throwing an error) risks
making a bad situation far worse. Anything that blocks forward progress
by VACUUM like this might go unnoticed for a long time. This could
eventually lead to a wraparound/xidStopLimit outage.
Note that _bt_unlink_halfdead_page() has always been able to bail on
page deletion when the target page's left sibling page was in an
inconsistent state. It now does the same thing (returns false to back
out of the second phase of deletion) when it notices sibling link
corruption in the target page's right sibling page.
This is similar to the work from commit 5b861baa (later backpatched as
commit 43e409ce), which taught nbtree to press on with vacuuming an
index when page deletion fails to "re-find" a downlink in the target
page's parent page. The "re-find" check seems to make VACUUM bail on
page deletion more often in practice, but there is no reason to take any
chances here.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CAH2-Wzko2q2kP1+UvgJyP9g0mF4hopK0NtQZcxwvMv9_ytGhkQ@mail.gmail.com
Backpatch: 11- (all supported versions).
We've had multiple issues with the clause_is_computable_at logic that
I introduced in 2489d76c4: it's been known to accept more than one
clone of the same qual at the same plan node, and also to accept no
clones at all. It's looking impractical to get it 100% right on the
basis of the currently-stored information, so fix it by introducing a
new RestrictInfo field "incompatible_relids" that explicitly shows
which outer joins a given clone mustn't be pushed above.
In principle we could populate this field in every RestrictInfo, but
that would cost space and there doesn't presently seem to be a need
for it in general. Also, while deconstruct_distribute_oj_quals can
easily fill the field with the remaining members of the commutative
join set that it's considering, computing it in the general case
seems again pretty complicated. So for now, just fill it for
clone quals.
Along the way, fix a bug that may or may not be only latent:
equivclass.c was generating replacement clauses with is_pushed_down
and has_clone/is_clone markings that didn't match their
required_relids. This led me to conclude that leaving the clone flags
out of make_restrictinfo's purview wasn't such a great idea after all,
so add them.
Per report from Richard Guo.
Discussion: https://postgr.es/m/CAMbWs48EYi_9-pSd0ORes1kTmTeAjT4Q3gu49hJtYCbSn2JyeA@mail.gmail.com
2dcd1578c4 left the --role option undocumented, which is
inconsistent with other deprecated options such as pg_dump's
--blobs and --no-blobs. This change adds --role back to
createuser's documentation and usage output and marks it as
deprecated.
Suggested-by: Peter Eisentraut
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/0e85c9e7-4804-1cdb-5a4a-c72c328f9ad8%40enterprisedb.com
Commit f62975b2a made headerscheck and cpluspluscheck a little
smarter than this documentation gave them credit for. Make
their docs match current reality. Also add a warning about the
layer of dust that has settled on the rest of these scripts.
Discussion: https://postgr.es/m/769950.1684797558@sss.pgh.pa.us
This file could be in the current (build) directory if we just
built it. However, when installing from a VPATH build from a
tarball, it will exist in the source directory and gmake will
therefore not rebuild it. Use the $< macro to find out where
gmake found it.
Oversight in b3a0d8324, which also exposes a buildfarm testing gap:
we test install from VPATH builds from bare source trees, but not
from tarballs.
Per report from Christoph Berg.
Discussion: https://postgr.es/m/ZGzEAqjxkkoY3ooH@msg.df7cb.de
That's how other boolean options are handled, so do likewise.
The previous coding with "enable" and "disable" was seemingly
modeled on gssencmode, but that's a three-way flag.
While at it, add PGGSSDELEGATION to the set of environment
variables cleared by pg_regress and Utils.pm.
Abhijit Menon-Sen, per gripe from Alvaro Herrera
Discussion: https://postgr.es/m/20230522091609.nlyuu4nolhycqs2p@alvherre.pgsql
