The previous coding first generated a uniform random value between 0.0 and
1.0, then converted that to an integer between 1 and 10000, and divided that
again by 10000. Those conversions are unnecessary; we can use the double
value that pg_erand48() returns directly. While we're at it, put the logic
into a helper function, getPoissonRand().
The largest delay generated by the old coding was about 9.2 times the
average, because of the way the uniformly distributed value used for the
calculation was truncated to 1/10000 granularity. The new coding doesn't
have such clamping. With my laptop's DBL_MIN value, the maximum delay with
the new coding is about 700x the average. That seems acceptable - any
reasonable pgbench session should last long enough to average that out.
Backpatch to 9.4.
The reported latency values now include the "schedule lag" time, that is,
the time between the transaction's scheduled start time and the time it
actually started. This relates better to a model where requests arrive at a
certain rate, and we are interested in the response time to the end user or
application, rather than the response time of the database itself.
Also, when --rate is used, include the schedule lag time in the log output.
The --rate option is new in 9.4, so backpatch to 9.4. It seems better to
make this change in 9.4, while we're still in the beta period, than ship a
9.4 version that calculates the values differently than 9.5.
Apparently, older versions of "prove" (couldn't identify the exact
version from the changelog) don't look into the t/ directory for tests
by default, so specify it explicitly.
Instead of palloc'ing each HashJoinTuple individually, allocate 32kB chunks
and pack the tuples densely in the chunks. This avoids the AllocChunk
header overhead, and the space wasted by standard allocator's habit of
rounding sizes up to the nearest power of two.
This doesn't contain any planner changes, because the planner's estimate of
memory usage ignores the palloc overhead. Now that the overhead is smaller,
the planner's estimates are in fact more accurate.
Tomas Vondra, reviewed by Robert Haas.
07c8651dd9 currently causes compilation errors on mscv (and
probably some other) compilers because our getopt_long()
implementation doesn't have support for optional_argument.
Thus implement optional_argument in our fallback implemenation. It's
quite possibly also useful in other cases.
Arguably this needs a configure check for optional_argument, but it
has existed pretty much since getopt_long() was introduced and thus
doesn't seem worth the configure runtime.
Normally I'd would not push a patch this fast, but this allows msvc to
build again and has low risk as only optional_argument behaviour has
changed.
Author: Michael Paquier and Andres Freund
Discussion: CAB7nPqS5VeedSCxrK=QouokbawgGKLpyc1Q++RRFCa_sjcSVrg@mail.gmail.com
The code I added in commit f343a880d5 was
careless about preserving AND/OR flatness: it could create a structure with
an OR node directly underneath another one. That breaks an assumption
that's fairly important for planning efficiency, not to mention triggering
various Asserts (as reported by Benjamin Smith). Add a trifle more logic
to handle the case properly.
Add --help=<topic> for the commandline, and \? <topic> as a backslash
command, to show more help than the invocations without parameters
do. "commands", "variables" and "options" currently exist as help
topics describing, respectively, backslash commands, psql variables,
and commandline switches. Without parameters the help commands show
their previous topic.
Some further wordsmithing or extending of the added help content might
be needed; but there seems little benefit delaying the overall feature
further.
Author: Pavel Stehule, editorialized by many
Reviewed-By: Andres Freund, Petr Jelinek, Fujii Masao, MauMau, Abhijit
Menon-Sen and Erik Rijkers.
Discussion: CAFj8pRDVGuC-nXBfe2CK8vpyzd2Dsr9GVpbrATAnZO=2YQ0s2Q@mail.gmail.com,
CAFj8pRA54AbTv2RXDTRxiAd8hy8wxmoVLqhJDRCwEnhdd7OUkw@mail.gmail.com
Previously, they functioned as barriers against CPU reordering but not
compiler reordering, an odd API that required extensive use of volatile
everywhere that spinlocks are used. That's error-prone and has negative
implications for performance, so change it.
In theory, this makes it safe to remove many of the uses of volatile
that we currently have in our code base, but we may find that there are
some bugs in this effort when we do. In the long run, though, this
should make for much more maintainable code.
Patch by me. Review by Andres Freund.
This provides a convenient method of classifying input values into buckets
that are not necessarily equal-width. It works on any sortable data type.
The choice of function name is a bit debatable, perhaps, but showing that
there's a relationship to the SQL standard's width_bucket() function seems
more attractive than the other proposals.
Petr Jelinek, reviewed by Pavel Stehule
The xml type previously rejected "content" that is empty or consists
only of spaces. But the SQL/XML standard allows that, so change that.
The accepted values for XML "documents" are not changed.
Reviewed-by: Ali Akbar <the.apaan@gmail.com>
Now that ALTER TABLE .. ALL IN TABLESPACE has replaced the previous
ALTER TABLESPACE approach, it makes sense to move the calls down in
to ProcessUtilitySlow where the rest of ALTER TABLE is handled.
This also means that event triggers will support ALTER TABLE .. ALL
(which was the impetus for the original change, though it has other
good qualities also).
Álvaro Herrera
Back-patch to 9.4 as the original rework was.
Some Sparc CPUs can be run in various coherence models, ranging from
RMO (relaxed) over PSO (partial) to TSO (total). Solaris has always
run CPUs in TSO mode while in userland, but linux didn't use to and
the various *BSDs still don't. Unfortunately the sparc TAS/S_UNLOCK
were only correct under TSO. Fix that by adding the necessary memory
barrier instructions. On sparcv8+, which should be all relevant CPUs,
these are treated as NOPs if the current consistency model doesn't
require the barriers.
Discussion: 20140630222854.GW26930@awork2.anarazel.de
Will be backpatched to all released branches once a few buildfarm
cycles haven't shown up problems. As I've no access to sparc, this is
blindly written.
psql's \s (print command history) doesn't work at all with recent libedit
versions when printing to the terminal, because libedit tries to do an
fchmod() on the target file which will fail if the target is /dev/tty.
(We'd already noted this in the context of the target being /dev/null.)
Even before that, it didn't work pleasantly, because libedit likes to
encode the command history file (to ensure successful reloading), which
renders it nigh unreadable, not to mention significantly different-looking
depending on exactly which libedit version you have. So let's forget using
write_history() for this purpose, and instead print the data ourselves,
using logic similar to that used to iterate over the history for newline
encoding/decoding purposes.
While we're at it, insert the ability to use the pager when \s is printing
to the terminal. This has been an acknowledged shortcoming of \s for many
years, so while you could argue it's not exactly a back-patchable bug fix
it still seems like a good improvement. Anyone who's seriously annoyed
at this can use "\s /dev/tty" or local equivalent to get the old behavior.
Experimentation with this showed that the history iteration logic was
actually rather broken when used with libedit. It turns out that with
libedit you have to use previous_history() not next_history() to advance
to more recent history entries. The easiest and most robust fix for this
seems to be to make a run-time test to verify which function to call.
We had not noticed this because libedit doesn't really need the newline
encoding logic: its own encoding ensures that command entries containing
newlines are reloaded correctly (unlike libreadline). So the effective
behavior with recent libedits was that only the oldest history entry got
newline-encoded or newline-decoded. However, because of yet other bugs in
history_set_pos(), some old versions of libedit allowed the existing loop
logic to reach entries besides the oldest, which means there may be libedit
~/.psql_history files out there containing encoded newlines in more than
just the oldest entry. To ensure we can reload such files, it seems
appropriate to back-patch this fix, even though that will result in some
incompatibility with older psql versions (ie, multiline history entries
written by a psql with this fix will look corrupted to a psql without it,
if its libedit is reasonably up to date).
Stepan Rutz and Tom Lane
The old claim is from my commit d06ebdb8d3 of
2000-07-17, but it seems to have been a plain old thinko; sum(float4) has
been distinct from sum(float8) since Berkeley days. Noted by KaiGai Kohei.
While at it, mention the existence of sum(money), which is also of
embarrassingly ancient vintage.
Update the tab completion for the changes made in
3c4cf08087, which rework 'MOVE ALL' to be
'ALTER .. ALL IN TABLESPACE'.
Fujii Masao
Back-patch to 9.4, as the original change was.
The link to the NIST web page about DES standards leads to nowhere, and
according to archive.org has been forwarded to an unrelated page for
many years. Therefore, just remove that link. More up to date
information can be found via Wikipedia, for example.
Previously \watch could not display the query execution time even
when \timing was enabled because it used PSQLexec instead of
SendQuery and that function didn't support \timing. This patch
introduces PSQLexecWatch and changes \watch so as to use it, instead.
PSQLexecWatch is the function to run the query, print its results and
display how long it took (only when \timing is enabled).
This patch also changes --echo-hidden so that it doesn't print
the query that \watch executes. Since \watch cannot execute
backslash command queries, they should not be printed even
when --echo-hidden is set.
Patch by me, review by Heikki Linnakangas and Michael Paquier
The number of % parameter markers in RAISE statement should match the number
of parameters given. We used to check that at execution time, but we have
all the information needed at compile time, so let's check it at compile
time instead. It's generally better to find mistakes earlier.
Marko Tiikkaja, reviewed by Fabien Coelho
Every redo routine uses the same idiom to determine what to do to a page:
check if there's a backup block for it, and if not read, the buffer if the
block exists, and check its LSN. Refactor that into a common function,
XLogReadBufferForRedo, making all the redo routines shorter and more
readable.
This has no user-visible effect, and makes no changes to the WAL format.
Reviewed by Andres Freund, Alvaro Herrera, Michael Paquier.
The new %l substitution shows the line number inside a (potentially
multi-line) statement starting from one.
Author: Sawada Masahiko, heavily editorialized by me.
Reviewed-By: Jeevan Chalke, Alvaro Herrera
This patch allows us to execute ALTER SYSTEM RESET command to
remove the configuration entry from postgresql.auto.conf.
Vik Fearing, reviewed by Amit Kapila and me.