types of unspecified parameters when submitted via extended query protocol.
This worked in 8.2 but I had broken it during plancache changes. DECLARE
CURSOR is now treated almost exactly like a plain SELECT through parse
analysis, rewrite, and planning; only just before sending to the executor
do we divert it away to ProcessUtility. This requires a special-case check
in a number of places, but practically all of them were already special-casing
SELECT INTO, so it's not too ugly. (Maybe it would be a good idea to merge
the two by treating IntoClause as a form of utility statement? Not going to
worry about that now, though.) That approach doesn't work for EXPLAIN,
however, so for that I punted and used a klugy solution of running parse
analysis an extra time if under extended query protocol.
RESET SESSION, RESET PLANS, and RESET TEMP are now DISCARD ALL,
DISCARD PLANS, and DISCARD TEMP, respectively. This is to avoid
confusion with the pre-existing RESET variants: the DISCARD
commands are not actually similar to RESET. Patch from Marko
Kreen, with some minor editorialization.
access to the planner's cursor-related planning options, and provide new
FETCH/MOVE routines that allow access to the full power of those commands.
Small refactoring of planner(), pg_plan_query(), and pg_plan_queries()
APIs to make it convenient to pass the planning options down from SPI.
This is the core-code portion of Pavel Stehule's patch for scrollable
cursor support in plpgsql; I'll review and apply the plpgsql changes
separately.
reviewed by Neil Conway. This patch adds the following DDL command
variants: RESET SESSION, RESET TEMP, RESET PLANS, CLOSE ALL, and
DEALLOCATE ALL. RESET SESSION is intended for use by connection
pool software and the like, in order to reset a client session
to something close to its initial state.
Note that while most of these command variants can be executed
inside a transaction block (but are not transaction-aware!),
RESET SESSION cannot. While this is inconsistent, it is intended
to catch programmer mistakes: RESET SESSION in an open transaction
block is probably unintended.
A DBA is allowed to create a language in his database if it's marked
"tmpldbacreate" in pg_pltemplate. The factory default is that this is set
for all standard trusted languages, but of course a superuser may adjust
the settings. In service of this, add the long-foreseen owner column to
pg_language; renaming, dropping, and altering owner of a PL now follow
normal ownership rules instead of being superuser-only.
Jeremy Drake, with some editorialization by Tom Lane.
rules to be defined with different, per session controllable, behaviors
for replication purposes.
This will allow replication systems like Slony-I and, as has been stated
on pgsql-hackers, other products to control the firing mechanism of
triggers and rewrite rules without modifying the system catalog directly.
The firing mechanisms are controlled by a new superuser-only GUC
variable, session_replication_role, together with a change to
pg_trigger.tgenabled and a new column pg_rewrite.ev_enabled. Both
columns are a single char data type now (tgenabled was a bool before).
The possible values in these attributes are:
'O' - Trigger/Rule fires when session_replication_role is "origin"
(default) or "local". This is the default behavior.
'D' - Trigger/Rule is disabled and fires never
'A' - Trigger/Rule fires always regardless of the setting of
session_replication_role
'R' - Trigger/Rule fires when session_replication_role is "replica"
The GUC variable can only be changed as long as the system does not have
any cached query plans. This will prevent changing the session role and
accidentally executing stored procedures or functions that have plans
cached that expand to the wrong query set due to differences in the rule
firing semantics.
The SQL syntax for changing a triggers/rules firing semantics is
ALTER TABLE <tabname> <when> TRIGGER|RULE <name>;
<when> ::= ENABLE | ENABLE ALWAYS | ENABLE REPLICA | DISABLE
psql's \d command as well as pg_dump are extended in a backward
compatible fashion.
Jan
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
observe the xmloption.
Reorganize the representation of the XML option in the parse tree and the
API to make it easier to manage and understand.
Add regression tests for parsing back XML expressions.
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
- Add new SQL command SET XML OPTION (also available via regular GUC) to
control the DOCUMENT vs. CONTENT option in implicit parsing and
serialization operations.
- Subtle corrections in the handling of the standalone property in
xmlroot().
- Allow xmlroot() to work on content fragments.
- Subtle corrections in the handling of the version property in
xmlconcat().
- Code refactoring for producing XML declarations.
FAMILY; and add FAMILY option to CREATE OPERATOR CLASS to allow adding a
class to a pre-existing family. Per previous discussion. Man, what a
tedious lot of cutting and pasting ...
columns procost and prorows, to allow simple user adjustment of the estimated
cost of a function call, as well as control of the estimated number of rows
returned by a set-returning function. We might eventually wish to extend this
to allow function-specific estimation routines, but there seems to be
consensus that we should try a simple constant estimate first. In particular
this provides a relatively simple way to control the order in which different
WHERE clauses are applied in a plan node, which is a Good Thing in view of the
fact that the recent EquivalenceClass planner rewrite made that much less
predictable than before.
per-column options for btree indexes. The planner's support for this is still
pretty rudimentary; it does not yet know how to plan mergejoins with
nondefault ordering options. The documentation is pretty rudimentary, too.
I'll work on improving that stuff later.
Note incompatible change from prior behavior: ORDER BY ... USING will now be
rejected if the operator is not a less-than or greater-than member of some
btree opclass. This prevents less-than-sane behavior if an operator that
doesn't actually define a proper sort ordering is selected.
the XmlExpr code in various lists, use a representation that has some hope
of reverse-listing correctly (though it's still a de-escaping function
shy of correctness), generally try to make it look more like Postgres
coding conventions.
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
the SQL spec, viz IS NULL is true if all the row's fields are null, IS NOT
NULL is true if all the row's fields are not null. The former coding got
this right for a limited number of cases with IS NULL (ie, those where it
could disassemble a ROW constructor at parse time), but was entirely wrong
for IS NOT NULL. Per report from Teodor.
I desisted from changing the behavior for arrays, since on closer inspection
it's not clear that there's any support for that in the SQL spec. This
probably needs more consideration.
of the syntax as this fundamentally dead-end approach can, in particular
combinations of single and multi column assignments. Improve rather
inadequate documentation and provide some regression tests.
by abandoning the idea that it should say SERIAL in the dump. Instead,
dump serial sequences and column defaults just like regular ones.
Add a new backend command ALTER SEQUENCE OWNED BY to let pg_dump recreate
the sequence-to-column dependency that was formerly created "behind the
scenes" by SERIAL. This restores SERIAL to being truly "just a macro"
consisting of component operations that can be stated explicitly in SQL.
Furthermore, the new command allows sequence ownership to be reassigned,
so that old mistakes can be cleaned up.
Also, downgrade the OWNED-BY dependency from INTERNAL to AUTO, since there
is no longer any very compelling argument why the sequence couldn't be
dropped while keeping the column. (This forces initdb, to be sure the
right kinds of dependencies are in there.)
Along the way, add checks to prevent ALTER OWNER or SET SCHEMA on an
owned sequence; you can now only do this indirectly by changing the
owning table's owner or schema. This is an oversight in previous
releases, but probably not worth back-patching.
plpgsql support to come later. Along the way, convert execMain's
SELECT INTO support into a DestReceiver, in order to eliminate some ugly
special cases.
Jonah Harris and Tom Lane
(e.g. "INSERT ... VALUES (...), (...), ...") and elsewhere as allowed
by the spec. (e.g. similar to a FROM clause subselect). initdb required.
Joe Conway and Tom Lane.
created in the bootstrap phase proper, rather than added after-the-fact
by initdb. This is cleaner than before because it allows us to retire the
undocumented ALTER TABLE ... CREATE TOAST TABLE command, but the real reason
I'm doing it is so that toast tables of shared catalogs will now have
predetermined OIDs. This will allow a reasonably clean solution to the
problem of locking tables before we load their relcache entries, to appear
in a forthcoming patch.
the opportunity to treat COUNT(*) as a zero-argument aggregate instead
of the old hack that equated it to COUNT(1); this is materially cleaner
(no more weird ANYOID cases) and ought to be at least a tiny bit faster.
Original patch by Sergey Koposov; review, documentation, simple regression
tests, pg_dump and psql support by moi.
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
Open items:
There were a few tangentially related issues that have come up that I think
are TODOs. I'm likely to tackle one or two of these next so I'm interested in
hearing feedback on them as well.
. Constraints currently do not know anything about inheritance. Tom suggested
adding a coninhcount and conislocal like attributes have to track their
inheritance status.
. Foreign key constraints currently do not get copied to new children (and
therefore my code doesn't verify them). I don't think it would be hard to
add them and treat them like CHECK constraints.
. No constraints at all are copied to tables defined with LIKE. That makes it
hard to use LIKE to define new partitions. The standard defines LIKE and
specifically says it does not copy constraints. But the standard already has
an option called INCLUDING DEFAULTS; we could always define a non-standard
extension LIKE table INCLUDING CONSTRAINTS that gives the user the option to
request a copy including constraints.
. Personally, I think the whole attislocal thing is bunk. The decision about
whether to drop a column from children tables or not is something that
should be up to the user and trying to DWIM based on whether there was ever
a local definition or the column was acquired purely through inheritance is
hardly ever going to match up with user expectations.
. And of course there's the whole unique and primary key constraint issue. I
think to get any traction at all on this you have a prerequisite of a real
partitioned table implementation where the system knows what the partition
key is so it can recognize when it's a leading part of an index key.
Greg Stark
JOIN, which I removed in a recent fit of over-optimism that we wouldn't
have any future use for it. Now it's needed to support disambiguating
WITH CHECK OPTION from WITH TIME ZONE. As proof of concept, add stub
grammar productions for WITH CHECK OPTION.
support both FOR UPDATE and FOR SHARE in one command, as well as both
NOWAIT and normal WAIT behavior. The more general code is actually
simpler and cleaner.
CREATE AGGREGATE aggname (input_type) (parameter_list)
along with the old syntax where the input type was named in the parameter
list. This fits more naturally with the way that the aggregate is identified
in DROP AGGREGATE and other utility commands; furthermore it has a natural
extension to handle multiple-input aggregates, where the basetype-parameter
method would get ugly. In fact, this commit fixes the grammar and all the
utility commands to support multiple-input aggregates; but DefineAggregate
rejects it because the executor isn't fixed yet.
I didn't do anything about treating agg(*) as a zero-input aggregate instead
of artificially making it a one-input aggregate, but that should be considered
in combination with supporting multi-input aggregates.
during parse analysis, not only errors detected in the flex/bison stages.
This is per my earlier proposal. This commit includes all the basic
infrastructure, but locations are only tracked and reported for errors
involving column references, function calls, and operators. More could
be done later but this seems like a good set to start with. I've also
moved the ReportSyntaxErrorPosition logic out of psql and into libpq,
which should make it available to more people --- even within psql this
is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
not likely ever to be implemented seeing it's been removed from SQL2003.
This allows getting rid of the 'filter' version of yylex() that we had in
parser.c, which should save at least a few microseconds in parsing.
creation of a shell type. This allows a less hacky way of dealing with
the mutual dependency between a datatype and its I/O functions: make a
shell type, then make the functions, then define the datatype fully.
We should fix pg_dump to handle things this way, but this commit just deals
with the backend.
Martijn van Oosterhout, with some corrections by Tom Lane.
comments on cluster global objects like databases, tablespaces, and
roles.
It touches a lot of places, but not much in the way of big changes. The
only design decision I made was to duplicate the query and manipulation
functions rather than to try and have them handle both shared and local
comments. I believe this is simpler for the code and not an issue for
callers because they know what type of object they are dealing with.
This has resulted in a shobj_description function analagous to
obj_description and backend functions [Create/Delete]SharedComments
mirroring the existing [Create/Delete]Comments functions.
pg_shdescription.h goes into src/include/catalog/
Kris Jurka
and DELETE. If specified, the alias must be used instead of the full
table name. Also, the alias currently cannot be used in the SET clause
of UPDATE.
Patch from Atsushi Ogawa, various editorialization by Neil Conway.
Along the way, make the rowtypes regression test pass if add_missing_from
is enabled, and add a new (skeletal) regression test for DELETE.
Continue to support GRANT ON [TABLE] for sequences for backward
compatibility; issue warning for invalid sequence permissions.
[Backward compatibility warning message.]
Add USAGE permission for sequences that allows only currval() and
nextval(), not setval().
Mention object name in grant/revoke warnings because of possible
multi-object operations.
(previously we only did = and <> correctly). Also, allow row comparisons
with any operators that are in btree opclasses, not only those with these
specific names. This gets rid of a whole lot of indefensible assumptions
about the behavior of particular operators based on their names ... though
it's still true that IN and NOT IN expand to "= ANY". The patch adds a
RowCompareExpr expression node type, and makes some changes in the
representation of ANY/ALL/ROWCOMPARE SubLinks so that they can share code
with RowCompareExpr.
I have not yet done anything about making RowCompareExpr an indexable
operator, but will look at that soon.
initdb forced due to changes in stored rules.
ScalarArrayOpExpr when possible, that is, whenever there is an array type
for the values of the expression list. This completes the project I've
been working on to improve the speed of index searches with long IN lists,
as per discussion back in mid-October.
I did not force initdb, but until you do one you will see failures in the
"rules" regression test, because some of the standard system views use IN
and their compiled formats have changed.
process of dropping roles by dropping objects owned by them and privileges
granted to them, or giving the owned objects to someone else, through the
use of the data stored in the new pg_shdepend catalog.
Some refactoring of the GRANT/REVOKE code was needed, as well as ALTER OWNER
code. Further cleanup of code duplication in the GRANT code seems necessary.
Implemented by me after an idea from Tom Lane, who also provided various kind
of implementation advice.
Regression tests pass. Some tests for the new functionality are also added,
as well as rudimentary documentation.
surprising results when it's some other numeric type. This doesn't solve
the generic problem of surprising implicit casts to text, but it's a
low-impact way of making sure this particular case behaves sanely.
Per gripe from Harald Fuchs and subsequent discussion.
as per my recent proposal. For now the template data is hard-wired in
proclang.c --- this should be replaced later by a new shared system
catalog, but we don't want to force initdb during 8.1 beta. This change
lets us cleanly load existing dump files even if they contain outright
wrong information about a PL's support functions, such as a wrong path
to the shared library or a missing validator function. Also, we can
revert the recent kluges to make pg_dump dump PL support functions that
are stored in pg_catalog.
While at it, I removed the code in pg_regress that replaced $libdir
with a hardcoded path for temporary installations. This is no longer
needed given our support for relocatable installations.
use these instead of its previous hack of changing pg_class.reltriggers.
Documentation is lacking, will add that later.
Patch by Satoshi Nagayasu, review and some extra work by Tom Lane.
doesn't automatically inherit the privileges of roles it is a member of;
for such a role, membership in another role can be exploited only by doing
explicit SET ROLE. The default inherit setting is TRUE, so by default
the behavior doesn't change, but creating a user with NOINHERIT gives closer
adherence to our current reading of SQL99. Documentation still lacking,
and I think the information schema needs another look.
role memberships; make superuser/createrole distinction do something
useful; fix some locking and CommandCounterIncrement issues; prevent
creation of loops in the membership graph.
syntactic conflicts, both privilege and role GRANT/REVOKE commands have
to use the same production for scanning the list of tokens that might
eventually turn out to be privileges or role names. So, change the
existing GRANT/REVOKE code to expect a list of strings not pre-reduced
AclMode values. Fix a couple other minor issues while at it, such as
InitializeAcl function name conflicting with a Windows system function.
and pg_auth_members. There are still many loose ends to finish in this
patch (no documentation, no regression tests, no pg_dump support for
instance). But I'm going to commit it now anyway so that Alvaro can
make some progress on shared dependencies. The catalog changes should
be pretty much done.
CURRENT_TIME, and LOCALTIME: now they just produce "timestamptz" not
"timestamptz(6)", etc. This makes the behavior more consistent with our
choice to not assign a specific default precision to column datatypes.
It should also save a few cycles at runtime due to not having to invoke
the round-to-given-precision functions.
I also took the opportunity to translate CURRENT_TIMESTAMP into "now()"
instead of an invocation of the timestamptz input converter --- this should
save a few cycles too.
in the database. The old behavior (reindex system catalogs only) is now
available as REINDEX SYSTEM. I did not add the complementary REINDEX USER
case since there did not seem to be consensus for this, but it would be
trivial to add later. Per recent discussions.
as well as the existing pg_catalog entries for prefix and postfix %.
These have never been documented, though they did appear in one old
regression test. This avoids surprising behavior in cases like
"SELECT -25 % -10". Per recent discussion.
Note: although there is a catalog change here, I did not force initdb
since there's no harm in leaving the inaccessible entries in one's
copy of pg_operator.
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
c_expr. Perhaps the restriction was once needed to avoid bison errors,
but it seems to work just fine now --- and even generates a slightly
smaller state machine. This change allows examples like
SELECT '13:45'::timetz AT TIME ZONE '-07:00'::interval;
to work without parentheses around the right-hand input.
in UPDATE. We also now issue a NOTICE if a query has _any_ implicit
range table entries -- in the past, we would only warn about implicit
RTEs in SELECTs with at least one explicit RTE.
As a result of the warning change, 25 of the regression tests had to
be updated. I also took the opportunity to remove some bogus whitespace
differences between some of the float4 and float8 variants. I believe
I have correctly updated all the platform-specific variants, but let
me know if that's not the case.
Original patch for DELETE ... USING from Euler Taveira de Oliveira,
reworked by Neil Conway.
implement any new feature, it just pushes the 'not implemented' error
message deeper into the backend. I also tweaked the grammar to accept
Oracle-ish parameter syntax (parameter name first), as well as the
SQL99 standard syntax (parameter mode first), since it was easy and
people will doubtless try to use both anyway.
whether or not it is a security definer. Changing a function's strictness
is required by SQL2003, and the other capabilities make sense. Also, allow
an optional RESTRICT noise word to be specified, for SQL conformance.
Some trivial regression tests added and the documentation has been
updated.
tests. Contributed by Koju Iijima, review from Neil Conway, Gavin Sherry
and Tom Lane.
Also, fix error in description of WITH CHECK OPTION clause in the CREATE
VIEW reference page: it should be "CASCADED", not "CASCADE".
command. This is useful because we can allow truncation of tables
referenced by foreign keys, so long as the referencing table is
truncated in the same command.
Alvaro Herrera
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
working as intended --- for some reason, FROM a.b.c was getting
parsed as if it were a function name and not a qualified name.
I think there must be a bug in bison, because it should have
complained that the grammar was ambiguous. Anyway, fix it along
the same lines previously used for func_name vs columnref, and get
rid of the right-recursion in attrs that seems to have confused
bison.
clause implicitly whenever one is not given explicitly. Remove concept
of a schema having an associated tablespace, and simplify the rules for
selecting a default tablespace for a table or index. It's now just
(a) explicit TABLESPACE clause; (b) default_tablespace if that's not an
empty string; (c) database's default. This will allow pg_dump to use
SET commands instead of tablespace clauses to determine object locations
(but I didn't actually make it do so). All per recent discussions.
to unreserved keyword, use ereport not elog, assign a separate error code
for 'could not obtain lock' so that applications will be able to detect
that case cleanly.
a separate production func_expr. This allows us to accept all these
variants in the backwards-compatible syntax for creating a functional
index; which beats documenting exactly which things work and which don't.
Interestingly, it also seems to make the generated state machine a little
bit smaller.
ColLabel instead of just ColId --- that is, any keyword can appear after
a dot and it will be taken as an identifier. Fixes problems with names
that are okay as standalone function names but fail when qualified.
by the SQL standard. For backwards compatibility, however, continue to
accept the syntax without. Minor editorialization in the reference pages
for these commands, too.
SAVEPOINT/RELEASE/ROLLBACK-TO syntax. (Alvaro)
Cause COMMIT of a failed transaction to report ROLLBACK instead of
COMMIT in its command tag. (Tom)
Fix a few loose ends in the nested-transactions stuff.
live in database or schema's default tablespace, as per today's discussion.
Also, remove some unused keywords from the grammar (PATH, PENDANT,
VERSION), and fix ALSO, which was added as a keyword but not added
to the keyword classification lists, thus making it worse-than-reserved.
only because 14627 still contained the same node that BitWithoutLength had
just produced. Make it more transparent. Also adjust ConstCharacter
to be coded the same way for consistency.
aggregates, conversions, functions, operators, operator classes,
schemas, types, and tablespaces. Fold the existing implementations
of alter domain owner and alter database owner in with these.
Christopher Kings-Lynne
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
As a side effect, cause subscripts in INSERT targetlists to do something
more or less sensible; previously we evaluated such subscripts and then
effectively ignored them. Another side effect is that UPDATE-ing an
element or slice of an array value that is NULL now produces a non-null
result, namely an array containing just the assigned-to positions.
extend the GUC variable set".
Plugin modules like the pl<lang> modules needs a way to declare
configuration parameters. The postmaster has no knowledge of such
modules when it reads the postgresql.conf file. Rather than allowing
totally unknown configuration parameters, the concept of a variable
"class" is introduced. Variables that belongs to a declared classes will
create a placeholder value of string type and will not generate an
error. When a module is loaded, it will declare variables for such a
class and make those variables "consume" any placeholders that has been
defined. Finally, the module will generate warnings for unrecognized
placeholders defined for its class.
More detail:
The design is outlined after the suggestions made by Tom Lane and Joe
Conway in this thread:
http://archives.postgresql.org/pgsql-hackers/2004-02/msg00229.php
A new string variable 'custom_variable_classes' is introduced. This
variable is a comma separated string of identifiers. Each identifier
denots a 'class' that will allow its members to be added without error.
This variable must be defined in postmaster.conf.
The lexer (guc_file.l) is changed so that it can accept a qualified name
in the form <ID>.<ID> as the name of a variable. I also changed so that
the 'custom_variable_classes', if found, is added first of all variables
in order to remove the order of declaration issue.
The guc_variables table is made more dynamic. It is originally created
with 20% slack and can grow dynamically. A capacity is introduced to
avoid resizing every time a new variable is added. guc_variables and
num_guc_variables becomes static (hidden).
The GucInfoMain now uses the new function get_guc_variables() and
GetNumConfigOptions instead or using the guc_variables directly.
The find_option() function, when passed a missing name, will check if
the name is qualified. If the name is qualified and if the qualifier
denotes a class included in the 'custom_variable_classes', a placeholder
variable will be created. Such a placeholder will not participate in a
list operation but will otherwise function as a normal string variable.
Define<type>GucVariable() functions will be added, one for each variable
type. They are inteded to be used by add-on modules like the pl<lang>
mappings. Example:
extern void DefineCustomBoolVariable(
const char* name,
const char* short_desc,
const char* long_desc,
bool* valueAddr,
GucContext context,
GucBoolAssignHook assign_hook,
GucShowHook show_hook);
(I created typedefs for the assign-hook and show-hook functions). A call
to these functions will define a new GUC-variable. If a placeholder
exists it will be replaced but it's value will be used in place of the
default value. The valueAddr is assumed ot point at a default value when
the define function is called. The only constraint that is imposed on a
Custom variable is that its name is qualified.
Finally, a function:
void EmittWarningsOnPlacholders(const char* className)
was added. This function should be called when a module has completed
its variable definitions. At that time, no placeholders should remain
for the class that the module uses. If they do, elog(INFO, ...) messages
will be issued to inform the user that unrecognized variables are
present.
Thomas Hallgren
It was necessary to touch in grammar and create a new node to make home
to the new syntax. The command is also supported in E
CPG. Doc updates are attached too. Only superusers can change the owner
of the database. New owners don't need any aditional
privileges.
Euler Taveira de Oliveira
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
rather than allowing them only in a few special cases as before. In
particular you can now pass a ROW() construct to a function that accepts
a rowtype parameter. Internal generation of RowExprs fixes a number of
corner cases that used to not work very well, such as referencing the
whole-row result of a JOIN or subquery. This represents a further step in
the work I started a month or so back to make rowtype values into
first-class citizens.
* ALTER ... ADD COLUMN with defaults and NOT NULL constraints works per SQL
spec. A default is implemented by rewriting the table with the new value
stored in each row.
* ALTER COLUMN TYPE. You can change a column's datatype to anything you
want, so long as you can specify how to convert the old value. Rewrites
the table. (Possible future improvement: optimize no-op conversions such
as varchar(N) to varchar(N+1).)
* Multiple ALTER actions in a single ALTER TABLE command. You can perform
any number of column additions, type changes, and constraint additions with
only one pass over the table contents.
Basic documentation provided in ALTER TABLE ref page, but some more docs
work is needed.
Original patch from Rod Taylor, additional work from Tom Lane.
o -Allow dump/load of CSV format
This adds new keywords to COPY and \copy:
CSV - enable CSV mode (comma separated variable)
QUOTE - specify quote character
ESCAPE - specify escape character
FORCE - force quoting of specified column
LITERAL - suppress null comparison for columns
Doc changes included. Regression updates coming from Andrew.
so that the 'val' is computed only once, per recent discussion. The
speedup is not much when 'val' is just a simple variable, but could be
significant for larger expressions. More importantly this avoids issues
with multiple evaluations of a volatile 'val', and it allows the CASE
expression to be reverse-listed in its original form by ruleutils.c.
intended to allow application authors to insulate themselves from
changes to the default value of 'default_with_oids' in future releases
of PostgreSQL.
This patch also fixes a bug in the earlier implementation of the
'default_with_oids' GUC variable: code in gram.y should not examine
the value of GUC variables directly due to synchronization issues.
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
parameters to be declared with names. pg_proc has a column to store
names, and CREATE FUNCTION can insert data into it, but that's all as
yet. I need to do more work on the pg_dump and plpgsql portions of the
patch before committing those, but I thought I'd get the bulky changes
in before the tree drifts under me.
initdb forced due to pg_proc change.