When the inner side of a nestloop SEMI or ANTI join is an indexscan that
uses all the join clauses as indexquals, it can be presumed that both
matched and unmatched outer rows will be processed very quickly: for
matched rows, we'll stop after fetching one row from the indexscan, while
for unmatched rows we'll have an indexscan that finds no matching index
entries, which should also be quick. The planner already knew about this,
but it was nonetheless charging for at least one full run of the inner
indexscan, as a consequence of concerns about the behavior of materialized
inner scans --- but those concerns don't apply in the fast case. If the
inner side has low cardinality (many matching rows) this could make an
indexscan plan look far more expensive than it actually is. To fix,
rearrange the work in initial_cost_nestloop/final_cost_nestloop so that we
don't add the inner scan cost until we've inspected the indexquals, and
then we can add either the full-run cost or just the first tuple's cost as
appropriate.
Experimentation with this fix uncovered another problem: add_path and
friends were coded to disregard cheap startup cost when considering
parameterized paths. That's usually okay (and desirable, because it thins
the path herd faster); but in this fast case for SEMI/ANTI joins, it could
result in throwing away the desired plain indexscan path in favor of a
bitmap scan path before we ever get to the join costing logic. In the
many-matching-rows cases of interest here, a bitmap scan will do a lot more
work than required, so this is a problem. To fix, add a per-relation flag
consider_param_startup that works like the existing consider_startup flag,
but applies to parameterized paths, and set it for relations that are the
inside of a SEMI or ANTI join.
To make this patch reasonably safe to back-patch, care has been taken to
avoid changing the planner's behavior except in the very narrow case of
SEMI/ANTI joins with inner indexscans. There are places in
compare_path_costs_fuzzily and add_path_precheck that are not terribly
consistent with the new approach, but changing them will affect planner
decisions at the margins in other cases, so we'll leave that for a
HEAD-only fix.
Back-patch to 9.3; before that, the consider_startup flag didn't exist,
meaning that the second aspect of the patch would be too invasive.
Per a complaint from Peter Holzer and analysis by Tomas Vondra.
Add a TABLESAMPLE clause to SELECT statements that allows
user to specify random BERNOULLI sampling or block level
SYSTEM sampling. Implementation allows for extensible
sampling functions to be written, using a standard API.
Basic version follows SQLStandard exactly. Usable
concrete use cases for the sampling API follow in later
commits.
Petr Jelinek
Reviewed by Michael Paquier and Simon Riggs
If we have a semijoin, say
SELECT * FROM x WHERE x1 IN (SELECT y1 FROM y)
and we're estimating the cost of a parameterized indexscan on x, the number
of repetitions of the indexscan should not be taken as the size of y; it'll
really only be the number of distinct values of y1, because the only valid
plan with y on the outside of a nestloop would require y to be unique-ified
before joining it to x. Most of the time this doesn't make that much
difference, but sometimes it can lead to drastically underestimating the
cost of the indexscan and hence choosing a bad plan, as pointed out by
David Kubečka.
Fixing this is a bit difficult because parameterized indexscans are costed
out quite early in the planning process, before we have the information
that would be needed to call estimate_num_groups() and thereby estimate the
number of distinct values of the join column(s). However we can move the
code that extracts a semijoin RHS's unique-ification columns, so that it's
done in initsplan.c rather than on-the-fly in create_unique_path(). That
shouldn't make any difference speed-wise and it's really a bit cleaner too.
The other bit of information we need is the size of the semijoin RHS,
which is easy if it's a single relation (we make those estimates before
considering indexscan costs) but problematic if it's a join relation.
The solution adopted here is just to use the product of the sizes of the
join component rels. That will generally be an overestimate, but since
estimate_num_groups() only uses this input as a clamp, an overestimate
shouldn't hurt us too badly. In any case we don't allow this new logic
to produce a value larger than we would have chosen before, so that at
worst an overestimate leaves us no wiser than we were before.
This code relied on pointer equality to identify which restriction clauses
also appear in the indexquals (and, therefore, don't need to be applied as
simple filter conditions). That was okay once upon a time, years ago,
before we introduced the equivalence-class machinery. Now there's about a
50-50 chance that an equality clause appearing in the indexquals will be
the mirror image (commutator) of its mate in the restriction list. When
that happens, we'd erroneously think that the clause would be re-evaluated
at each visited row, and therefore inflate the cost estimate for the
indexscan by the clause's cost.
Add some logic to catch this case. It seems to me that it continues not to
be worthwhile to expend the extra predicate-proof work that createplan.c
will do on the finally-selected plan, but this case is common enough and
cheap enough to handle that we should do so.
This will make a small difference (about one cpu_operator_cost per row)
in simple cases; but in situations where there's an expensive function in
the indexquals, it can make a very large difference, as seen in recent
example from Jeff Janes.
This is a long-standing bug, but I'm hesitant to back-patch because of the
possibility of destabilizing plan choices that people may be happy with.
This requires changing quite a few places that were depending on
sizeof(HeapTupleHeaderData), but it seems for the best.
Michael Paquier, some adjustments by me
This allows extension modules to define their own methods for
scanning a relation, and get the core code to use them. It's
unclear as yet how much use this capability will find, but we
won't find out if we never commit it.
KaiGai Kohei, reviewed at various times and in various levels
of detail by Shigeru Hanada, Tom Lane, Andres Freund, Álvaro
Herrera, and myself.
This reverts commit ee1e5662d8, as well as
a remarkably large number of followup commits, which were mostly concerned
with the fact that the implementation didn't work terribly well. It still
doesn't: we probably need some rather basic work in the GUC infrastructure
if we want to fully support GUCs whose default varies depending on the
value of another GUC. Meanwhile, it also emerged that there wasn't really
consensus in favor of the definition the patch tried to implement (ie,
effective_cache_size should default to 4 times shared_buffers). So whack
it all back to where it was. In a followup commit, I'll do what was
recently agreed to, which is to simply change the default to a higher
value.
The previous method was overly complex and underly correct; in particular,
by assigning the default value with PGC_S_OVERRIDE, it prevented later
attempts to change the setting in postgresql.conf, as noted by Jeff Janes.
We should just assign the default value with source PGC_S_DYNAMIC_DEFAULT,
which will have the desired priority relative to the boot_val as well as
user-set values.
There is still a gap in this method: if there's an explicit assignment of
effective_cache_size = -1 in the postgresql.conf file, and that assignment
appears before shared_buffers is assigned, the code will substitute 4 times
the bootstrap default for shared_buffers, and that value will then persist
(since it will have source PGC_S_FILE). I don't see any very nice way
to avoid that though, and it's not a case to be expected in practice.
The existing comments in guc-file.l look forward to a redesign of the
DYNAMIC_DEFAULT mechanism; if that ever happens, we should consider this
case as one of the things we'd like to improve.
Fix integer overflow issue noted by Magnus Hagander, as well as a bunch
of other infelicities in commit ee1e5662d8
and its unreasonably large number of followups.
This patch adds the ability to write TABLE( function1(), function2(), ...)
as a single FROM-clause entry. The result is the concatenation of the
first row from each function, followed by the second row from each
function, etc; with NULLs inserted if any function produces fewer rows than
others. This is believed to be a much more useful behavior than what
Postgres currently does with multiple SRFs in a SELECT list.
This syntax also provides a reasonable way to combine use of column
definition lists with WITH ORDINALITY: put the column definition list
inside TABLE(), where it's clear that it doesn't control the ordinality
column as well.
Also implement SQL-compliant multiple-argument UNNEST(), by turning
UNNEST(a,b,c) into TABLE(unnest(a), unnest(b), unnest(c)).
The SQL standard specifies TABLE() with only a single function, not
multiple functions, and it seems to require an implicit UNNEST() which is
not what this patch does. There may be something wrong with that reading
of the spec, though, because if it's right then the spec's TABLE() is just
a pointless alternative spelling of UNNEST(). After further review of
that, we might choose to adopt a different syntax for what this patch does,
but in any case this functionality seems clearly worthwhile.
Andrew Gierth, reviewed by Zoltán Böszörményi and Heikki Linnakangas, and
significantly revised by me
The planner largely failed to consider the possibility that a
PlaceHolderVar's expression might contain a lateral reference to a Var
coming from somewhere outside the PHV's syntactic scope. We had a previous
report of a problem in this area, which I tried to fix in a quick-hack way
in commit 4da6439bd8, but Antonin Houska
pointed out that there were still some problems, and investigation turned
up other issues. This patch largely reverts that commit in favor of a more
thoroughly thought-through solution. The new theory is that a PHV's
ph_eval_at level cannot be higher than its original syntactic level. If it
contains lateral references, those don't change the ph_eval_at level, but
rather they create a lateral-reference requirement for the ph_eval_at join
relation. The code in joinpath.c needs to handle that.
Another issue is that createplan.c wasn't handling nested PlaceHolderVars
properly.
In passing, push knowledge of lateral-reference checks for join clauses
into join_clause_is_movable_to. This is mainly so that FDWs don't need
to deal with it.
This patch doesn't fix the original join-qual-placement problem reported by
Jeremy Evans (and indeed, one of the new regression test cases shows the
wrong answer because of that). But the PlaceHolderVar problems need to be
fixed before that issue can be addressed, so committing this separately
seems reasonable.
This is SQL-standard with a few extensions, namely support for
subqueries and outer references in clause expressions.
catversion bump due to change in Aggref and WindowFunc.
David Fetter, reviewed by Dean Rasheed.
In commit 0f61d4dd1b, I added code to copy up
column width estimates for each column of a subquery. That code supposed
that the subquery couldn't have any output columns that didn't correspond
to known columns of the current query level --- which is true when a query
is parsed from scratch, but the assumption fails when planning a view that
depends on another view that's been redefined (adding output columns) since
the upper view was made. This results in an assertion failure or even a
crash, as per bug #8025 from lindebg. Remove the Assert and instead skip
the column if its resno is out of the expected range.
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
This patch takes care of a number of problems having to do with failure
to choose valid join orders and incorrect handling of lateral references
pulled up from subqueries. Notable changes:
* Add a LateralJoinInfo data structure similar to SpecialJoinInfo, to
represent join ordering constraints created by lateral references.
(I first considered extending the SpecialJoinInfo structure, but the
semantics are different enough that a separate data structure seems
better.) Extend join_is_legal() and related functions to prevent trying
to form unworkable joins, and to ensure that we will consider joins that
satisfy lateral references even if the joins would be clauseless.
* Fill in the infrastructure needed for the last few types of relation scan
paths to support parameterization. We'd have wanted this eventually
anyway, but it is necessary now because a relation that gets pulled up out
of a UNION ALL subquery may acquire a reltargetlist containing lateral
references, meaning that its paths *have* to be parameterized whether or
not we have any code that can push join quals down into the scan.
* Compute data about lateral references early in query_planner(), and save
in RelOptInfo nodes, to avoid repetitive calculations later.
* Assorted corner-case bug fixes.
There's probably still some bugs left, but this is a lot closer to being
real than it was before.
Re-allow subquery pullup for LATERAL subqueries, except when the subquery
is below an outer join and contains lateral references to relations outside
that outer join. If we pull up in such a case, we risk introducing lateral
cross-references into outer joins' ON quals, which is something the code is
entirely unprepared to cope with right now; and I'm not sure it'll ever be
worth coping with.
Support lateral refs in VALUES (this seems to be the only additional path
type that needs such support as a consequence of re-allowing subquery
pullup).
Put in a slightly hacky fix for joinpath.c's refusal to consider
parameterized join paths even when there cannot be any unparameterized
ones. This was causing "could not devise a query plan for the given query"
failures in queries involving more than two FROM items.
Put in an even more hacky fix for distribute_qual_to_rels() being unhappy
with join quals that contain references to rels outside their syntactic
scope; which is to say, disable that test altogether. Need to think about
how to preserve some sort of debugging cross-check here, while not
expending more cycles than befits a debugging cross-check.
This patch implements the standard syntax of LATERAL attached to a
sub-SELECT in FROM, and also allows LATERAL attached to a function in FROM,
since set-returning function calls are expected to be one of the principal
use-cases.
The main change here is a rewrite of the mechanism for keeping track of
which relations are visible for column references while the FROM clause is
being scanned. The parser "namespace" lists are no longer lists of bare
RTEs, but are lists of ParseNamespaceItem structs, which carry an RTE
pointer as well as some visibility-controlling flags. Aside from
supporting LATERAL correctly, this lets us get rid of the ancient hacks
that required rechecking subqueries and JOIN/ON and function-in-FROM
expressions for invalid references after they were initially parsed.
Invalid column references are now always correctly detected on sight.
In passing, remove assorted parser error checks that are now dead code by
virtue of our having gotten rid of add_missing_from, as well as some
comments that are obsolete for the same reason. (It was mainly
add_missing_from that caused so much fudging here in the first place.)
The planner support for this feature is very minimal, and will be improved
in future patches. It works well enough for testing purposes, though.
catversion bump forced due to new field in RangeTblEntry.
We made use of the ROWS estimate for set-returning functions used in FROM,
but not for those used in SELECT targetlists; which is a bit of an
oversight considering there are common usages that require the latter
approach. Improve that. (I had initially thought it might be worth
folding this into cost_qual_eval, but after investigation concluded that
that wouldn't be very helpful, so just do it separately.) Per complaint
from David Johnston.
Back-patch to 9.2, but not further, for fear of destabilizing plan choices
in existing releases.
This patch adjusts the treatment of parameterized paths so that all paths
with the same parameterization (same set of required outer rels) for the
same relation will have the same rowcount estimate. We cache the rowcount
estimates to ensure that property, and hopefully save a few cycles too.
Doing this makes it practical for add_path_precheck to operate without
a rowcount estimate: it need only assume that paths with different
parameterizations never dominate each other, which is close enough to
true anyway for coarse filtering, because normally a more-parameterized
path should yield fewer rows thanks to having more join clauses to apply.
In add_path, we do the full nine yards of comparing rowcount estimates
along with everything else, so that we can discard parameterized paths that
don't actually have an advantage. This fixes some issues I'd found with
add_path rejecting parameterized paths on the grounds that they were more
expensive than not-parameterized ones, even though they yielded many fewer
rows and hence would be cheaper once subsequent joining was considered.
To make the same-rowcounts assumption valid, we have to require that any
parameterized path enforce *all* join clauses that could be obtained from
the particular set of outer rels, even if not all of them are useful for
indexing. This is required at both base scans and joins. It's a good
thing anyway since the net impact is that join quals are checked at the
lowest practical level in the join tree. Hence, discard the original
rather ad-hoc mechanism for choosing parameterization joinquals, and build
a better one that has a more principled rule for when clauses can be moved.
The original rule was actually buggy anyway for lack of knowledge about
which relations are part of an outer join's outer side; getting this right
requires adding an outer_relids field to RestrictInfo.
cost_index's method for estimating per-tuple costs of evaluating filter
conditions (a/k/a qpquals) was completely wrong in the presence of derived
indexable conditions, such as range conditions derived from a LIKE clause.
This was largely masked in common cases as a result of all simple operator
clauses having about the same costs, but it could show up in a big way when
dealing with functional indexes containing expensive functions, as seen for
example in bug #6579 from Istvan Endredy. Rejigger the calculation to give
sane answers when the indexquals aren't a subset of the baserestrictinfo
list. As a side benefit, we now do the calculation properly for cases
involving join clauses (ie, parameterized indexscans), which we always
overestimated before.
There are still cases where this is an oversimplification, such as clauses
that can be dropped because they are implied by a partial index's
predicate. But we've never accounted for that in cost estimates before,
and I'm not convinced it's worth the cycles to try to do so.
For those variables only used when asserts are enabled, use a new
macro PG_USED_FOR_ASSERTS_ONLY, which expands to
__attribute__((unused)) when asserts are not enabled.
Further reflection shows that a single callback isn't very workable if we
desire to let FDWs generate multiple Paths, because that forces the FDW to
do all work necessary to generate a valid Plan node for each Path. Instead
split the former PlanForeignScan API into three steps: GetForeignRelSize,
GetForeignPaths, GetForeignPlan. We had already bit the bullet of breaking
the 9.1 FDW API for 9.2, so this shouldn't cause very much additional pain,
and it's substantially more flexible for complex FDWs.
Add an fdw_private field to RelOptInfo so that the new functions can save
state there rather than possibly having to recalculate information two or
three times.
In addition, we'd not thought through what would be needed to allow an FDW
to set up subexpressions of its choice for runtime execution. We could
treat ForeignScan.fdw_private as an executable expression but that seems
likely to break existing FDWs unnecessarily (in particular, it would
restrict the set of node types allowable in fdw_private to those supported
by expression_tree_walker). Instead, invent a separate field fdw_exprs
which will receive the postprocessing appropriate for expression trees.
(One field is enough since it can be a list of expressions; also, we assume
the corresponding expression state tree(s) will be held within fdw_state,
so we don't need to add anything to ForeignScanState.)
Per review of Hanada Shigeru's pgsql_fdw patch. We may need to tweak this
further as we continue to work on that patch, but to me it feels a lot
closer to being right now.
This patch fixes the planner so that it can generate nestloop-with-
inner-indexscan plans even with one or more levels of joining between
the indexscan and the nestloop join that is supplying the parameter.
The executor was fixed to handle such cases some time ago, but the
planner was not ready. This should improve our plans in many situations
where join ordering restrictions formerly forced complete table scans.
There is probably a fair amount of tuning work yet to be done, because
of various heuristics that have been added to limit the number of
parameterized paths considered. However, we are not going to find out
what needs to be adjusted until the code gets some real-world use, so
it's time to get it in there where it can be tested easily.
Note API change for index AM amcostestimate functions. I'm not aware of
any non-core index AMs, but if there are any, they will need minor
adjustments.
This reverts commit ff68b256a5.
The recent change to use -fexcess-precision=standard should make those
Asserts safe, and does fix a test case that formerly crashed for me,
so I think there's no need to have a cross-version difference in the
code here.
In commit e2c2c2e8b1 I made use of nested
list structures to show which clauses went with which index columns, but
on reflection that's a data structure that only an old-line Lisp hacker
could love. Worse, it adds unnecessary complication to the many places
that don't much care which clauses go with which index columns. Revert
to the previous arrangement of flat lists of clauses, and instead add a
parallel integer list of column numbers. The places that care about the
pairing can chase both lists with forboth(), while the places that don't
care just examine one list the same as before.
The only real downside to this is that there are now two more lists that
need to be passed to amcostestimate functions in case they care about
column matching (which btcostestimate does, so not passing the info is not
an option). Rather than deal with 11-argument amcostestimate functions,
pass just the IndexPath and expect the functions to extract fields from it.
That gets us down to 7 arguments which is better than 11, and it seems
more future-proof against likely additions to the information we keep
about an index path.
It's potentially useful for an index to repeat the same indexable column
or expression in multiple index columns, if the columns have different
opclasses. (If they share opclasses too, the duplicate column is pretty
useless, but nonetheless we've allowed such cases since 9.0.) However,
the planner failed to cope with this, because createplan.c was relying on
simple equal() matching to figure out which index column each index qual
is intended for. We do have that information available upstream in
indxpath.c, though, so the fix is to not flatten the multi-level indexquals
list when putting it into an IndexPath. Then we can rely on the sublist
structure to identify target index columns in createplan.c. There's a
similar issue for index ORDER BYs (the KNNGIST feature), so introduce a
multi-level-list representation for that too. This adds a bit more
representational overhead, but we might more or less buy that back by not
having to search for matching index columns anymore in createplan.c;
likewise btcostestimate saves some cycles.
Per bug #6351 from Christian Rudolph. Likely symptoms include the "btree
index keys must be ordered by attribute" failure shown there, as well as
"operator MMMM is not a member of opfamily NNNN".
Although this is a pre-existing problem that can be demonstrated in 9.0 and
9.1, I'm not going to back-patch it, because the API changes in the planner
seem likely to break things such as index plugins. The corner cases where
this matters seem too narrow to justify possibly breaking things in a minor
release.
While logically correct, these two Asserts could fail depending on the
vagaries of floating-point arithmetic. In particular, on machines with
floating-point registers wider than standard "double" values, it was
possible for the compiler to compare a rounded-to-double value already
stored in memory with an unrounded long double value still in a register.
Given the preceding checks, these assertions aren't adding much, so let's
just get rid of them rather than try to find a compiler-proof fix.
Per report from Pavel Stehule.
Given the lack of previous complaints, and the fact that only developers
would be likely to trip over it, I'm only going to change this in HEAD,
even though the code has been like this for a long time.
Add a column pg_class.relallvisible to remember the number of pages that
were all-visible according to the visibility map as of the last VACUUM
(or ANALYZE, or some other operations that update pg_class.relpages).
Use relallvisible/relpages, instead of an arbitrary constant, to estimate
how many heap page fetches can be avoided during an index-only scan.
This is pretty primitive and will no doubt see refinements once we've
acquired more field experience with the index-only scan mechanism, but
it's way better than using a constant.
Note: I had to adjust an underspecified query in the window.sql regression
test, because it was changing answers when the plan changed to use an
index-only scan. Some of the adjacent tests perhaps should be adjusted
as well, but I didn't do that here.
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
Formerly, set_subquery_pathlist and other creators of plans for subqueries
saved only the rangetable and rowMarks lists from the lower-level
PlannerInfo. But there's no reason not to remember the whole PlannerInfo,
and indeed this turns out to simplify matters in a number of places.
The immediate reason for doing this was so that the subroot will still be
accessible when we're trying to extract column statistics out of an
already-planned subquery. But now that I've done it, it seems like a good
code-beautification effort in its own right.
I also chose to get rid of the transient subrtable and subrowmark fields in
SubqueryScan nodes, in favor of having setrefs.c look up the subquery's
RelOptInfo. That required changing all the APIs in setrefs.c to pass
PlannerInfo not PlannerGlobal, which was a large but quite mechanical
transformation.
One side-effect not foreseen at the beginning is that this finally broke
inheritance_planner's assumption that replanning the same subquery RTE N
times would necessarily give interchangeable results each time. That
assumption was always pretty risky, but now we really have to make a
separate RTE for each instance so that there's a place to carry the
separate subroots.
set_append_rel_pathlist supposed that, while computing per-column width
estimates for the appendrel, it could ignore child rels for which the
translated reltargetlist entry wasn't a Var. This gave rise to completely
silly estimates in some common cases, such as constant outputs from some or
all of the arms of a UNION ALL. Instead, fall back on get_typavgwidth to
estimate from the value's datatype; which might be a poor estimate but at
least it's not completely wacko.
That problem was exposed by an Assert in set_subquery_size_estimates, which
unfortunately was still overoptimistic even with that fix, since we don't
compute attr_widths estimates for appendrels that are entirely excluded by
constraints. So remove the Assert; we'll just fall back on get_typavgwidth
in such cases.
Also, since set_subquery_size_estimates calls set_baserel_size_estimates
which calls set_rel_width, there's no need for set_subquery_size_estimates
to call get_typavgwidth; set_rel_width will handle it for us if we just
leave the estimate set to zero. Remove the unnecessary code.
Per report from Erik Rijkers and subsequent investigation.
A PlaceHolderVar's expression might contain another, lower-level
PlaceHolderVar. If the outer PlaceHolderVar is used, the inner one
certainly will be also, and so we have to make sure that both of them get
into the placeholder_list with correct ph_may_need values during the
initial pre-scan of the query (before deconstruct_jointree starts).
We did this correctly for PlaceHolderVars appearing in the query quals,
but overlooked the issue for those appearing in the top-level targetlist;
with the result that nested placeholders referenced only in the targetlist
did not work correctly, as illustrated in bug #6154.
While at it, add some error checking to find_placeholder_info to ensure
that we don't try to create new placeholders after it's too late to do so;
they have to all be created before deconstruct_jointree starts.
Back-patch to 8.4 where the PlaceHolderVar mechanism was introduced.
The previous coding failed to account properly for the costs of evaluating
the input expressions of aggregates and window functions, as seen in a
recent gripe from Claudio Freire. (I said at the time that it wasn't
counting these costs at all; but on closer inspection, it was effectively
charging these costs once per output tuple. That is completely wrong for
aggregates, and not exactly right for window functions either.)
There was also a hard-wired assumption that aggregates and window functions
had procost 1.0, which is now fixed to respect the actual cataloged costs.
The costing of WindowAgg is still pretty bogus, since it doesn't try to
estimate the effects of spilling data to disk, but that seems like a
separate issue.
Although rowcount estimates really ought not be NaN, a bug elsewhere
could perhaps result in that, and that would cause Assert failure in
cost_mergejoin, which I believe to be the explanation for bug #5977 from
Anton Kuznetsov. Seems like a good idea to expend a couple more cycles
to prevent that, even though the real bug is elsewhere. Not back-patching,
though, because we don't encourage running production systems with
Asserts on.
Tom Lane
Bruce Momjian
Simon Riggs
Robert Haas
Noah Misch
Andrew Dunstan
Alvaro Herrera
Peter Eisentraut