Add pages deleted from GIN's pending list during cleanup to free space map
immediately. Clean up process could be initiated by ordinary insert but adding
page to FSM might occur only at vacuum. On some workload like never-vacuumed
insert-only tables it could cause a huge bloat.
Jeff Janes <jeff.janes@gmail.com>
Currently, in-memory posting list during GIN build process is limited 1GB
because of using repalloc. The patch replaces call of repalloc to repalloc_huge.
It increases limit of posting list from 180 millions
(1GB / sizeof(ItemPointerData)) to 4 billions limited by maxcount/count fields
in GinEntryAccumulator and subsequent calls. Check added.
Also, fix accounting of allocatedMemory during build to prevent integer
overflow with maintenance_work_mem > 4GB.
Robert Abraham <robert.abraham86@googlemail.com> with additions by me
In GIN, an all-zeros page would be leaked forever, and never reused. Just
add them to the FSM in vacuum, and they will be reinitialized when grabbed
from the FSM. On master and 9.5, attempting to access the page's opaque
struct also caused an assertion failure, although that was otherwise
harmless.
Reported by Jeff Janes. Backpatch to all supported versions.
I broke this with my WAL format refactoring patch. Before that, the metapage
was read from disk, and modified in-place regardless of the LSN. That was
always a bit silly, as there's no need to read the old page version from
disk disk when we're overwriting it anyway. So that was changed in 9.5, but
I failed to add a GinInitPage call to initialize the page-headers correctly.
Usually you wouldn't notice, because the metapage is already in the page
cache and is not zeroed.
One way to reproduce this is to perform a VACUUM on an already vacuumed
table (so that the vacuum has no real work to do), immediately after a
checkpoint, and then perform an immediate shutdown. After recovery, the
page headers of the metapage will be incorrectly all-zeroes.
Reported by Jeff Janes
If data checksums or wal_log_hints is on, and a GIN page is split, the code
to find a new, empty, block was called after having already called
XLogBeginInsert(). That causes an assertion failure or PANIC, if finding the
new block involves updating a FSM page that had not been modified since last
checkpoint, because that update is WAL-logged, which calls XLogBeginInsert
again. Nested XLogBeginInsert calls are not supported.
To fix, rearrange GIN code so that XLogBeginInsert is called later, after
finding the victim buffers.
Reported by Jeff Janes.
Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
For upcoming BRIN opclasses, it's convenient to have strategy numbers
defined in a single place. Since there's nothing appropriate, create
it. The StrategyNumber typedef now lives there, as well as existing
strategy numbers for B-trees (from skey.h) and R-tree-and-friends (from
gist.h). skey.h is forced to include stratnum.h because of the
StrategyNumber typedef, but gist.h is not; extensions that currently
rely on gist.h for rtree strategy numbers might need to add a new
A few .c files can stop including skey.h and/or gist.h, which is a nice
side benefit.
Per discussion:
https://www.postgresql.org/message-id/20150514232132.GZ2523@alvh.no-ip.org
Authored by Emre Hasegeli and Álvaro.
(It's not clear to me why bootscanner.l has any #include lines at all.)
Previously the funcCtx was a child of the tmpCtx, but that was broken
by commit eaa5808e8e, which made
MemoryContextReset() delete, not reset, child contexts. The behavior of
having a tmpCtx reset also clear the other context seems rather dubious
anyway, so let's just disentangle them. Per report from Erik Rijkers.
In passing, fix badly-inaccurate comments about these contexts.
It was getting tedious to track and release all the different things that
form a scan key. We were leaking at least the queryCategories array, and
possibly more, on a rescan. That was visible if a GIN index was used in a
nested loop join. This also protects from leaks in extractQuery method.
No backpatching, given the lack of complaints from the field. Maybe later,
after this has received more field testing.
The requiredEntries / additionalEntries arrays were not freed in
freeScanKeys() like other per-key stuff.
It's not obvious, but startScanKey() was only ever called after the keys
have been initialized with ginNewScanKey(). That's why it doesn't need to
worry about freeing existing arrays. The ginIsNewKey() test in gingetbitmap
was never true, because ginrescan free's the existing keys, and it's not OK
to call gingetbitmap twice in a row without calling ginrescan in between.
To make that clear, remove the unnecessary ginIsNewKey(). And just to be
extra sure that nothing funny happens if there is an existing key after all,
call freeScanKeys() to free it if it exists. This makes the code more
straightforward.
(I'm seeing other similar leaks in testing a query that rescans an GIN index
scan, but that's a different issue. This just fixes the obvious leak with
those two arrays.)
Backpatch to 9.4, where GIN fast scan was added.
When gin_fuzzy_search_limit was used, we could jump out of startScan()
without calling startScanKey(). That was harmless in 9.3 and below, because
startScanKey()() didn't do anything interesting, but in 9.4 it initializes
information needed for skipping entries (aka GIN fast scans), and you
readily get a segfault if it's not done. Nevertheless, it was clearly wrong
all along, so backpatch all the way to 9.1 where the early return was
introduced.
(AFAICS startScanKey() did nothing useful in 9.3 and below, because the
fields it initialized were already initialized in ginFillScanKey(), but I
don't dare to change that in a minor release. ginFillScanKey() is always
called in gingetbitmap() even though there's a check there to see if the
scan keys have already been initialized, because they never are; ginrescan()
free's them.)
In the passing, remove unnecessary if-check from the second inner loop in
startScan(). We already check in the first loop that the condition is true
for all entries.
Reported by Olaf Gawenda, bug #12694, Backpatch to 9.1 and above, although
AFAICS it causes a live bug only in 9.4.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
Previously the maximum size of GIN pending list was controlled only by
work_mem. But the reasonable value of work_mem and the reasonable size
of the list are basically not the same, so it was not appropriate to
control both of them by only one GUC, i.e., work_mem. This commit
separates new GUC, pending_list_cleanup_size, from work_mem to allow
users to control only the size of the list.
Also this commit adds pending_list_cleanup_size as new storage parameter
to allow users to specify the size of the list per index. This is useful,
for example, when users want to increase the size of the list only for
the GIN index which can be updated heavily, and decrease it otherwise.
Reviewed by Etsuro Fujita.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
The code that tried to split a page at 75/25 ratio, when appending to the
end of an index, was buggy in two ways. First, there was a silly typo that
caused it to just fill the left page as full as possible. But the logic as
it was intended wasn't correct either, and would actually have given a ratio
closer to 60/40 than 75/25.
Gaetano Mendola spotted the typo. Backpatch to 9.4, where this code was added.
Every redo routine uses the same idiom to determine what to do to a page:
check if there's a backup block for it, and if not read, the buffer if the
block exists, and check its LSN. Refactor that into a common function,
XLogReadBufferForRedo, making all the redo routines shorter and more
readable.
This has no user-visible effect, and makes no changes to the WAL format.
Reviewed by Andres Freund, Alvaro Herrera, Michael Paquier.
The list of posting lists it's dealing with can contain placeholders for
deleted posting lists. The placeholders are kept around so that they can
be WAL-logged, but we must be careful to not try to access them.
This fixes bug #11280, reported by Mårten Svantesson. Backpatch to 9.4,
where the compressed data leaf page code was added.
log_newpage is used by many indexams, in addition to heap, but for
historical reasons it's always been part of the heapam rmgr. Starting with
9.3, we have another WAL record type for logging an image of a page,
XLOG_FPI. Simplify things by moving log_newpage and log_newpage_buffer to
xlog.c, and switch to using the XLOG_FPI record type.
Bump the WAL version number because the code to replay the old HEAP_NEWPAGE
records is removed.
The existance of the assert_enabled variable (backing the
debug_assertions GUC) reduced the amount of knowledge some static code
checkers (like coverity and various compilers) could infer from the
existance of the assertion. That could have been solved by optionally
removing the assertion_enabled variable from the Assert() et al macros
at compile time when some special macro is defined, but the resulting
complication doesn't seem to be worth the gain from having
debug_assertions. Recompiling is fast enough.
The debug_assertions GUC is still available, but readonly, as it's
useful when diagnosing problems. The commandline/client startup option
-A, which previously also allowed to enable/disable assertions, has
been removed as it doesn't serve a purpose anymore.
While at it, reduce code duplication in bufmgr.c and localbuf.c
assertions checking for spurious buffer pins. That code had to be
reindented anyway to cope with the assert_enabled removal.
When returning rows from a bitmap, as done with partial match queries, we
would get stuck in an infinite loop if the bitmap contained a lossy page
reference.
This bug is new in master, it was introduced by the patch to allow skipping
items refuted by other entries in GIN scans.
Report and fix by Alexander Korotkov
To-be-deleted list pages contain no useful information, as they are being
deleted, but we must still protect the writes from being torn by a crash
after a partial write. To do that, re-initialize the pages on WAL replay.
Jeff Janes caught this with a test program to test partial writes.
Backpatch to all supported versions.
In writeListPage, never take a full-page image of the page, because we
have all the information required to re-initialize in the WAL record
anyway. Before this fix, a full-page image was always generated, unless
full_page_writes=off, because when the page is initialized its LSN is
always 0. In stable-branches, keep the code to restore the backup blocks
if they exist, in case that the WAL is generated with an older minor
version, but in master Assert that there are no full-page images.
In the redo routine, add missing "off++". Otherwise the tuples are added
to the page in reverse order. That happens to be harmless because we
always scan and remove all the tuples together, but it was clearly wrong.
Also, it was masked by the first bug unless full_page_writes=off, because
the page was always restored from a full-page image.
Backpatch to all supported versions.
The README incorrectly claimed that GIN posting tree pages contain an array
of uncompressed items in addition to compressed posting lists. Earlier
versions of the GIN posting list compression patch worked that way, but not
the one that was committed.
This allows squeezing out the unused space in full-page writes. And more
importantly, it can be a useful debugging aid.
In hindsight we should've done this back when GIN was added - we wouldn't
need the 'maxoff' field in the page opaque struct if we had used pd_lower
and pd_upper like on normal pages. But as long as there can be pages in the
index that have been binary-upgraded from pre-9.4 versions, we can't rely
on that, and have to continue using 'maxoff'.
Most of the code churn comes from renaming some macros, now that they're
used on internal pages, too.
This change is completely backwards-compatible, no effect on pg_upgrade.
The entry B-tree pages all follow the standard page layout. The 9.3 code has
this right. I inadvertently changed this at some point during the big
refactorings in git master.
There were a couple of bugs here. First, if the fuzzy limit was exceeded,
the loop in entryGetItem might drop out too soon if a whole block needs to
be skipped because it's < advancePast ("continue" in a while-loop checks the
loop condition too). Secondly, the loop checked when stepping to a new page
that there is at least one offset on the page < advancePast, but we cannot
rely on that on subsequent calls of entryGetItem, because advancePast might
change in between. That caused the skipping loop to read bogus items in the
TbmIterateResult's offset array.
First item and fix by Alexander Korotkov, second bug pointed out by Fabrízio
de Royes Mello, by a small variation of Alexander's test query.
Forgot to set the incomplete-split flag on the left page half, in redo of a
page split.
Spotted this by comparing the page contents on master and standby, after
inserting/applying each WAL record.
Also add a regression test for a GIN index with enough items with the same
key, so that a GIN posting tree gets created. Apparently none of the
existing GIN tests were large enough for that.
This code is new, no backpatching required.
Inserting a downlink to an internal page clears the incomplete-split flag
of the child's left sibling, so the left sibling's LSN also needs to be
updated and it needs to be marked dirty. The codepath for an insertion got
this right, but the case where the internal node is split because of
inserting the new downlink missed that.
Inserting (in retail) into the new 9.4 format GIN posting tree created much
larger WAL records than in 9.3. The previous strategy to WAL logging was
basically to log the whole page on each change, with the exception of
completely unmodified segments up to the first modified one. That was not
too bad when appending to the end of the page, as only the last segment had
to be WAL-logged, but per Fujii Masao's testing, even that produced 2x the
WAL volume that 9.3 did.
The new strategy is to keep track of changes to the posting lists in a more
fine-grained fashion, and also make the repacking" code smarter to avoid
decoding and re-encoding segments unnecessarily.
With the GIN "fast scan" feature, GIN can skip items without fetching all
the keys for them, if it can prove that they don't match regardless of
those keys. So far, it has done the proving by calling the boolean
consistent function with all combinations of TRUE/FALSE for the unfetched
keys, but since that's O(n^2), it becomes unfeasible with more than a few
keys. We can avoid calling consistent with all the combinations, if we can
tell the operator class implementation directly which keys are unknown.
This commit includes a triConsistent function for the built-in array and
tsvector opclasses.
Alexander Korotkov, with some changes by me.
We don't take a full-page image of the GIN metapage; instead, the WAL record
contains all the information required to reconstruct it from scratch. But
to avoid torn page hazards, we must re-initialize it from the WAL record
every time, even if it already has a greater LSN, similar to how normal full
page images are restored.
This was highly unlikely to cause any problems in practice, because the GIN
metapage is small. We rely on an update smaller than a 512 byte disk sector
to be atomic elsewhere, at least in pg_control. But better safe than sorry,
and this would be easy to overlook if more fields are added to the metapage
so that it's no longer small.
Reported by Noah Misch. Backpatch to all supported versions.
The shimTriConstistentFn, which calls the opclass's consistent function with
all combinations of TRUE/FALSE for any MAYBE argument, modifies the entryRes
array passed by the caller. Change startScanKey to re-initialize it between
each call to accommodate that.
It's actually a bad habit by shimTriConsistentFn to modify its argument. But
the only caller that doesn't already re-initialize the entryRes array was
startScanKey, and it's easy for startScanKey to do so. Add a comment to
shimTriConsistentFn about that.
Note: this does not give a free pass to opclass-provided consistent
functions to modify the entryRes argument; shimTriConsistent assumes that
they don't, even though it does it itself.
While at it, refactor startScanKey to allocate the requiredEntries and
additionalEntries after it knows exactly how large they need to be. Saves a
little bit of memory, and looks nicer anyway.
Per complaint by Tom Lane, buildfarm and the pg_trgm regression test.
If you have a GIN query like "rare & frequent", we currently fetch all the
items that match either rare or frequent, call the consistent function for
each item, and let the consistent function filter out items that only match
one of the terms. However, if we can deduce that "rare" must be present for
the overall qual to be true, we can scan all the rare items, and for each
rare item, skip over to the next frequent item with the same or greater TID.
That greatly speeds up "rare & frequent" type queries.
To implement that, introduce the concept of a tri-state consistent function,
where the 3rd value is MAYBE, indicating that we don't know if that term is
present. Operator classes only provide a boolean consistent function, so we
simulate the tri-state consistent function by calling the boolean function
several times, with the MAYBE arguments set to all combinations of TRUE and
FALSE. Testing all combinations is only feasible for a small number of MAYBE
arguments, but it is envisioned that we'll provide a way for operator
classes to provide a native tri-state consistent function, which can be much
more efficient. But that is not included in this patch.
We were already using that trick to for lossy pages, calling the consistent
function with the lossy entry set to TRUE and FALSE. Now that we have the
tri-state consistent function, use it for lossy pages too.
Alexander Korotkov, with fair amount of refactoring by me.
When skipping over some items in a posting tree, re-find the new location
by descending the tree from root, rather than walking the right links.
This can save a lot of I/O.
Heavily modified from Alexander Korotkov's fast scan patch.
If we're skipping past a certain TID, avoid decoding posting list segments
that only contain smaller TIDs.
Extracted from Alexander Korotkov's fast scan patch, heavily modified.
In a multi-key search, ie. something like "col @> 'foo' AND col @> 'bar'",
as soon as we find the next item that matches the first criteria, we don't
need to check the second criteria for TIDs smaller the first match. That
saves a lot of effort, especially if one of the terms is rare, while the
second occurs very frequently.
Based on ideas from Alexander Korotkov's fast scan patch.
The maxoff field is not used in the new, compressed page format. Let's
reset it when converting an old-format page to the new format. The code
won't care either way, but this makes it possible to use the field for
something else in the future.
When vacuuming a data leaf page, any compressed posting lists that are not
modified, are copied back to the buffer from a later location in the same
buffer rather than from a palloc'd copy. IOW, they are just moved
downwards in the same buffer. Because the source and destination addresses
can overlap, we must use memmove rather than memcpy.
Report and fix by Alexander Korotkov.
Since C99, it's been standard for printf and friends to accept a "z" size
modifier, meaning "whatever size size_t has". Up to now we've generally
dealt with printing size_t values by explicitly casting them to unsigned
long and using the "l" modifier; but this is really the wrong thing on
platforms where pointers are wider than longs (such as Win64). So let's
start using "z" instead. To ensure we can do that on all platforms, teach
src/port/snprintf.c to understand "z", and add a configure test to force
use of that implementation when the platform's version doesn't handle "z".
Having done that, modify a bunch of places that were using the
unsigned-long hack to use "z" instead. This patch doesn't pretend to have
gotten everyplace that could benefit, but it catches many of them. I made
an effort in particular to ensure that all uses of the same error message
text were updated together, so as not to increase the number of
translatable strings.
It's possible that this change will result in format-string warnings from
pre-C99 compilers. We might have to reconsider if there are any popular
compilers that will warn about this; but let's start by seeing what the
buildfarm thinks.
Andres Freund, with a little additional work by me
The Sparc machines in the buildfarm are crashing because of misaligned
access to posting lists stored in entry tuples.
I accidentally removed a critical SHORTALIGN() from ginFormTuple, as part
of the packed posting lists patch. Perhaps I thought it was unnecessary,
because the index_form_tuple() call above the SHORTALIGN already aligned
the size, missing the fact that the null-category byte makes it misaligned
again (I think the SHORTALIGN is indeed unnecessary if there's no null-
category byte, but let's just play it safe...)
GIN posting lists are now encoded using varbyte-encoding, which allows them
to fit in much smaller space than the straight ItemPointer array format used
before. The new encoding is used for both the lists stored in-line in entry
tree items, and in posting tree leaf pages.
To maintain backwards-compatibility and keep pg_upgrade working, the code
can still read old-style pages and tuples. Posting tree leaf pages in the
new format are flagged with GIN_COMPRESSED flag, to distinguish old and new
format pages. Likewise, entry tree tuples in the new format have a
GIN_ITUP_COMPRESSED flag set in a bit that was previously unused.
This patch bumps GIN_CURRENT_VERSION from 1 to 2. New indexes created with
version 9.4 will therefore have version number 2 in the metapage, while old
pg_upgraded indexes will have version 1. The code treats them the same, but
it might be come handy in the future, if we want to drop support for the
uncompressed format.
Alexander Korotkov and me. Reviewed by Tomas Vondra and Amit Langote.
Insertion to a non-leaf GIN page didn't make a full-page image of the page,
which is wrong. The code used to do it correctly, but was changed (commit
853d1c3103) because the redo-routine didn't
track incomplete splits correctly when the page was restored from a full
page image. Of course, that was not right way to fix it, the redo routine
should've been fixed instead. The redo-routine was surreptitiously fixed
in 2010 (commit 4016bdef8a), so all we need
to do now is revert the code that creates the record to its original form.
This doesn't change the format of the WAL record.
Backpatch to all supported versions.
Replace it with an approach similar to what GiST uses: when a page is split,
the left sibling is marked with a flag indicating that the parent hasn't been
updated yet. When the parent is updated, the flag is cleared. If an insertion
steps on a page with the flag set, it will finish split before proceeding
with the insertion.
The post-recovery cleanup mechanism was never totally reliable, as insertion
to the parent could fail e.g because of running out of memory or disk space,
leaving the tree in an inconsistent state.
This also divides the responsibility of WAL-logging more clearly between
the generic ginbtree.c code, and the parts specific to entry and posting
trees. There is now a common WAL record format for insertions and deletions,
which is written by ginbtree.c, followed by tree-specific payload, which is
returned by the placetopage- and split- callbacks.
Separate the insertion payload from the more static portions of GinBtree.
GinBtree now only contains information related to searching the tree, and
the information of what to insert is passed separately.
Add root block number to GinBtree, instead of passing it around all the
functions as argument.
Split off ginFinishSplit() from ginInsertValue(). ginFinishSplit is
responsible for finding the parent and inserting the downlink to it.
Split off the portion of ginInsertValue that inserts the tuple to current
level into a separate function, ginPlaceToPage. ginInsertValue's charter
is now to recurse up the tree to insert the downlink, when a page split is
required.
This is in preparation for a patch to change the way incomplete splits are
handled, which will need to do these operations separately. And IMHO makes
the code more readable anyway.
This creates a new gin-btree callback function for creating a downlink for
a page. Previously, ginxlog.c duplicated the logic used during normal
operation.
The root page is filled with as many items as fit, and the rest are inserted
using normal insertions. However, I fumbled the variable names, and the code
actually memcpy'd all the items on the page, overflowing the buffer. While
at it, rename the variable to make the distinction more clear.
Reported by Teodor Sigaev. This bug was introduced by my recent
refactorings, so no backpatching required.
If a page is deleted, and reused for something else, just as a search is
following a rightlink to it from its left sibling, the search would continue
scanning whatever the new contents of the page are. That could lead to
incorrect query results, or even something more curious if the page is
reused for a different kind of a page.
To fix, modify the search algorithm to lock the next page before releasing
the previous one, and refrain from deleting pages from the leftmost branch
of the tree.
Add a new Concurrency section to the README, explaining why this works.
There is a lot more one could say about concurrency in GIN, but that's for
another patch.
Backpatch to all supported versions.
Merge the isEnoughSpace and placeToPage functions in the b-tree interface
into one function that tries to put a tuple on page, and returns false if
it doesn't fit.
Move createPostingTree function to gindatapage.c, and change its contract
so that it can be passed more items than fit on the root page. It's in a
better position than the callers to know how many items fit.
Move ginMergeItemPointers out of gindatapage.c, into a separate file.
These changes make no difference now, but reduce the footprint of Alexander
Korotkov's upcoming patch to pack item pointers more tightly.
It makes for cleaner code to have separate Get/Add functions for PostingItems
and ItemPointers. A few callsites that have to deal with both types need to
be duplicated because of this, but all the callers have to know which one
they're dealing with anyway. Overall, this reduces the amount of casting
required.
Extracted from Alexander Korotkov's larger patch to change the data page
format.
Every other core buffer page consumer initializes the bytes it furnishes
to PageAddItem(). For consistency, do the same here. No back-patch;
regardless, we couldn't count on the fix so long as binary upgrade can
carry forward affected index builds.
Remove use of PageSetTLI() from all page manipulation functions
and adjust README to indicate change in the way we make changes
to pages. Repurpose those bytes into the pd_checksum field and
explain how that works in comments about page header.
Refactoring ahead of actual feature patch which would make use
of the checksum field, arriving later.
Jeff Davis, with comments and doc changes by Simon Riggs
Direction suggested by Robert Haas; many others providing
review comments.
This gets rid of XLByteLT, XLByteLE, XLByteEQ and XLByteAdvance.
These were useful for brevity when XLogRecPtrs were split in
xlogid/xrecoff; but now that they are simple uint64's, they are just
clutter. The only downside to making this change would be ease of
backporting patches, but that has been negated by other substantive
changes to the involved code anyway. The clarity of simpler expressions
makes the change worthwhile.
Most of the changes are mechanical, but in a couple of places, the patch
author chose to invert the operator sense, making the code flow more
logical (and more in line with preceding comments).
Author: Andres Freund
Eyeballed by Dimitri Fontaine and Alvaro Herrera
Most of the replay functions for WAL record types that modify more than
one page failed to ensure that those pages were locked correctly to ensure
that concurrent queries could not see inconsistent page states. This is
a hangover from coding decisions made long before Hot Standby was added,
when it was hardly necessary to acquire buffer locks during WAL replay
at all, let alone hold them for carefully-chosen periods.
The key problem was that RestoreBkpBlocks was written to hold lock on each
page restored from a full-page image for only as long as it took to update
that page. This was guaranteed to break any WAL replay function in which
there was any update-ordering constraint between pages, because even if the
nominal order of the pages is the right one, any mixture of full-page and
non-full-page updates in the same record would result in out-of-order
updates. Moreover, it wouldn't work for situations where there's a
requirement to maintain lock on one page while updating another. Failure
to honor an update ordering constraint in this way is thought to be the
cause of bug #7648 from Daniel Farina: what seems to have happened there
is that a btree page being split was rewritten from a full-page image
before the new right sibling page was written, and because lock on the
original page was not maintained it was possible for hot standby queries to
try to traverse the page's right-link to the not-yet-existing sibling page.
To fix, get rid of RestoreBkpBlocks as such, and instead create a new
function RestoreBackupBlock that restores just one full-page image at a
time. This function can be invoked by WAL replay functions at the points
where they would otherwise perform non-full-page updates; in this way, the
physical order of page updates remains the same no matter which pages are
replaced by full-page images. We can then further adjust the logic in
individual replay functions if it is necessary to hold buffer locks
for overlapping periods. A side benefit is that we can simplify the
handling of concurrency conflict resolution by moving that code into the
record-type-specfic functions; there's no more need to contort the code
layout to keep conflict resolution in front of the RestoreBkpBlocks call.
In connection with that, standardize on zero-based numbering rather than
one-based numbering for referencing the full-page images. In HEAD, I
removed the macros XLR_BKP_BLOCK_1 through XLR_BKP_BLOCK_4. They are
still there in the header files in previous branches, but are no longer
used by the code.
In addition, fix some other bugs identified in the course of making these
changes:
spgRedoAddNode could fail to update the parent downlink at all, if the
parent tuple is in the same page as either the old or new split tuple and
we're not doing a full-page image: it would get fooled by the LSN having
been advanced already. This would result in permanent index corruption,
not just transient failure of concurrent queries.
Also, ginHeapTupleFastInsert's "merge lists" case failed to mark the old
tail page as a candidate for a full-page image; in the worst case this
could result in torn-page corruption.
heap_xlog_freeze() was inconsistent about using a cleanup lock or plain
exclusive lock: it did the former in the normal path but the latter for a
full-page image. A plain exclusive lock seems sufficient, so change to
that.
Also, remove gistRedoPageDeleteRecord(), which has been dead code since
VACUUM FULL was rewritten.
Back-patch to 9.0, where hot standby was introduced. Note however that 9.0
had a significantly different WAL-logging scheme for GIST index updates,
and it doesn't appear possible to make that scheme safe for concurrent hot
standby queries, because it can leave inconsistent states in the index even
between WAL records. Given the lack of complaints from the field, we won't
work too hard on fixing that branch.
The heapam XLog functions are used by other modules, not all of which
are interested in the rest of the heapam API. With this, we let them
get just the XLog stuff in which they are interested and not pollute
them with unrelated includes.
Also, since heapam.h no longer requires xlog.h, many files that do
include heapam.h no longer get xlog.h automatically, including a few
headers. This is useful because heapam.h is getting pulled in by
execnodes.h, which is in turn included by a lot of files.
The Solaris Studio compiler warns about these instances, unlike more
mainstream compilers such as gcc. But manual inspection showed that
the code is clearly not reachable, and we hope no worthy compiler will
complain about removing this code.
Make it clearer that the passed stack mustn't be empty, and that we
are not supposed to fall off the end of the stack in the main loop.
Tighten the loop that extracts the root block number, too.
Markus Wanner and Tom Lane
When I implemented the ginbuildempty() function as part of
implementing unlogged tables, I falsified the note in the header
comment for log_newpage. Although we could fix that up by changing
the comment, it seems cleaner to add a new function which is
specifically intended to handle this case. So do that.
XLOG_GIN_UPDATE_META_PAGE and XLOG_GIN_DELETE_LISTPAGE records were printed
with a list link field labeled as "blkno", which was confusing, especially
when the link was empty (InvalidBlockNumber). Print the metapage block
number instead, since that's what's actually being updated. We could
include the link values too as a separate field, but not clear it's worth
the trouble.
Back-patch to 8.4 where the dubious code was added.
In commit 4016bdef8a I fixed a bunch of
ginxlog.c bugs having to do with not handling XLogReadBuffer failures
correctly. However, in ginRedoUpdateMetapage and ginRedoDeleteListPages,
I unaccountably thought that failure to read the metapage would be
impossible and just put in an elog(PANIC) call. This is of course wrong:
failure is exactly what will happen if the index got dropped (or rebuilt)
between creation of the WAL record and the crash we're trying to recover
from. I believe this explains Nicholas Wilson's recent report of these
errors getting reached.
Also, fix memory leak in forgetIncompleteSplit. This wasn't of much
concern when the code was written, but in a long-running standby server
page split records could be expected to accumulate indefinitely.
Back-patch to 8.4 --- before that, GIN didn't have a metapage.
A simple thinko in ginRedoUpdateMetapage, namely failing to increment a
loop counter, led to inserting records into the last pending-list page in
the wrong order (the opposite of that intended). So far as I can tell,
this would not upset the code that eventually flushes pending items into
the main part of the GIN index. But it did break the code that searched
the pending list for matches, resulting in transient failure to find
matching entries during index lookups, as illustrated in bug #6307 from
Maksym Boguk.
Back-patch to 8.4 where the incorrect code was introduced.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
Experimentation with contrib/btree_gist shows that the majority of the GIST
support functions potentially need collation information. Safest policy
seems to be to pass it to all of them, instead of making assumptions about
which ones could possibly need it.
Since collation is effectively an argument, not a property of the function,
FmgrInfo is really the wrong place for it; and this becomes critical in
cases where a cached FmgrInfo is used for varying purposes that might need
different collation settings. Fix by passing it in FunctionCallInfoData
instead. In particular this allows a clean fix for bug #5970 (record_cmp
not working). This requires touching a bit more code than the original
method, but nobody ever thought that collations would not be an invasive
patch...
Honor index column's collation spec if there is one, don't go to the
expense of calling get_typcollation when we can reasonably assume that
all GIN storage types will use default collation, and be sure to set
a collation for the comparePartialFn too.
All expression nodes now have an explicit output-collation field, unless
they are known to only return a noncollatable data type (such as boolean
or record). Also, nodes that can invoke collation-aware functions store
a separate field that is the collation value to pass to the function.
This avoids confusion that arises when a function has collatable inputs
and noncollatable output type, or vice versa.
Also, replace the parser's on-the-fly collation assignment method with
a post-pass over the completed expression tree. This allows us to use
a more complex (and hopefully more nearly spec-compliant) assignment
rule without paying for it in extra storage in every expression node.
Fix assorted bugs in the planner's handling of collations by making
collation one of the defining properties of an EquivalenceClass and
by converting CollateExprs into discardable RelabelType nodes during
expression preprocessing.
These are needed to support reloading dumps of 9.0 installations containing
contrib/intarray or contrib/tsearch2. Since not only regular dump/reload
but binary upgrade would fail, it seems worth the trouble to carry these
stubs for awhile. Note that the contrib opclasses referencing these
functions will still work fine, since GIN doesn't actually pay any
attention to the declared signature of a support function.
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
The original coding could combine duplicate entries only when they
originated from the same qual condition. In particular it could not
combine cases where multiple qual conditions all give rise to full-index
scan requests, which is an expensive case well worth optimizing. Refactor
so that duplicates are recognized across all the quals.
Per my recent proposal(s). Null key datums can now be returned by
extractValue and extractQuery functions, and will be stored in the index.
Also, placeholder entries are made for indexable items that are NULL or
contain no keys according to extractValue. This means that the index is
now always complete, having at least one entry for every indexed heap TID,
and so we can get rid of the prohibition on full-index scans. A full-index
scan is implemented much the same way as partial-match scans were already:
we build a bitmap representing all the TIDs found in the index, and then
drive the results off that.
Also, introduce a concept of a "search mode" that can be requested by
extractQuery when the operator requires matching to empty items (this is
just as cheap as matching to a single key) or requires a full index scan
(which is not so cheap, but it sure beats failing or giving wrong answers).
The behavior remains backward compatible for opclasses that don't return
any null keys or request a non-default search mode.
Using these features, we can now make the GIN index opclass for anyarray
behave in a way that matches the actual anyarray operators for &&, <@, @>,
and = ... which it failed to do before in assorted corner cases.
This commit fixes the core GIN code and ginarrayprocs.c, updates the
documentation, and adds some simple regression test cases for the new
behaviors using the array operators. The tsearch and contrib GIN opclass
support functions still need to be looked over and probably fixed.
Another thing I intend to fix separately is that this is pretty inefficient
for cases where more than one scan condition needs a full-index search:
we'll run duplicate GinScanEntrys, each one of which builds a large bitmap.
There is some existing logic to merge duplicate GinScanEntrys but it needs
refactoring to make it work for entries belonging to different scan keys.
Note that most of gin.h has been split out into a new file gin_private.h,
so that gin.h doesn't export anything that's not supposed to be used by GIN
opclasses or the rest of the backend. I did quite a bit of other code
beautification work as well, mostly fixing comments and choosing more
appropriate names for things.
The contents of an unlogged table are WAL-logged; thus, they are not
available on standby servers and are truncated whenever the database
system enters recovery. Indexes on unlogged tables are also unlogged.
Unlogged GiST indexes are not currently supported.
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
This is a heavily revised version of builtin_knngist_core-0.9. The
ordering operators are no longer mixed in with actual quals, which would
have confused not only humans but significant parts of the planner.
Instead, ordering operators are carried separately throughout planning and
execution.
Since the API for ambeginscan and amrescan functions had to be changed
anyway, this commit takes the opportunity to rationalize that a bit.
RelationGetIndexScan no longer forces a premature index_rescan call;
instead, callers of index_beginscan must call index_rescan too. Aside from
making the AM-side initialization logic a bit less peculiar, this has the
advantage that we do not make a useless extra am_rescan call when there are
runtime key values. AMs formerly could not assume that the key values
passed to amrescan were actually valid; now they can.
Teodor Sigaev and Tom Lane
The GIN code has absolutely no business exporting GIN-specific functions
with names as generic as compareItemPointers() or newScanKey(); that's
just trouble waiting to happen. I got annoyed about this again just now
and decided to fix it. This commit ensures that all global symbols
defined in access/gin/ have names including "gin" or "Gin". There were a
couple of cases, like names involving "PostingItem", where arguably the
names were already sufficiently nongeneric; but I figured as long as I was
risking creating merge problems for unapplied GIN patches I might as well
impose a uniform policy.
I didn't touch any static symbol names. There might be some places
where it'd be appropriate to rename some static functions to match
siblings that are exported, but I'll leave that for another time.
The better estimate requires more statistics than we previously stored:
in particular, counts of "entry" versus "data" pages within the index,
as well as knowledge of the number of distinct key values. We collect
this information during initial index build and update it during VACUUM,
storing the info in new fields on the index metapage. No initdb is
required because these fields will read as zeroes in a pre-existing
index, and the new gincostestimate code is coded to behave (reasonably)
sanely if they are zeroes.
Teodor Sigaev, reviewed by Jan Urbanski, Tom Lane, and Itagaki Takahiro.
The original coding was quite sloppy about handling the case where
XLogReadBuffer fails (because the page has since been deleted). This
would result in either "bad buffer id: 0" or an Assert failure during
replay, if indeed the page were no longer there. In a couple of places
it also neglected to check whether the change had already been applied,
which would probably result in corrupted index contents. I believe that
bug #5703 is an instance of the first problem. These issues could show up
without replication, but only if you were unfortunate enough to crash
between modification of a GIN index and the next checkpoint.
Back-patch to 8.2, which is as far back as GIN has WAL support.
Although the key-combining code claimed to work correctly if its input
contained both lossy and exact pointers for a single page in a single TID
stream, in fact this did not work, and could not work without pretty
fundamental redesign. Modify keyGetItem so that it will not return such a
stream, by handling lossy-pointer cases a bit more explicitly than we did
before.
Per followup investigation of a gripe from Artur Dabrowski.
An example of a query that failed given his data set is
select count(*) from search_tab where
(to_tsvector('german', keywords ) @@ to_tsquery('german', 'ee:* | dd:*')) and
(to_tsvector('german', keywords ) @@ to_tsquery('german', 'aa:*'));
Back-patch to 8.4 where the lossy pointer code was introduced.
struct representing a tree entry, rather than being a separately allocated
piece of storage. This API is at least as clean as the old one (if not
more so --- there were some bizarre choices in there) and it permits a
very substantial memory savings, on the order of 2X in ginbulk.c's usage.
Also, fix minor memory leaks in code called by ginEntryInsert, in
particular in ginInsertValue and entryFillRoot, as well as ginEntryInsert
itself. These leaks resulted in the GIN index build context continuing
to bloat even after we'd filled it to maintenance_work_mem and started
to dump data out to the index.
In combination these fixes restore the GIN index build code to honoring
the maintenance_work_mem limit about as well as it did in 8.4. Speed
seems on par with 8.4 too, maybe even a bit faster, for a non-pathological
case in which HEAD was formerly slower.
Back-patch to 9.0 so we don't have a performance regression from 8.4.
routines to make them behave better in the presence of "lossy" index pointers.
The previous coding was outright incorrect for some cases, as recently
reported by Artur Dabrowski: scanGetItem would fail to return index entries in
cases where one index key had multiple exact pointers on the same page as
another key had a lossy pointer. Also, keyGetItem was extremely inefficient
for cases where a single index key generates multiple "entry" streams, such as
an @@ operator with a multiple-clause tsquery. The presence of a lossy page
pointer in any one stream defeated its ability to use the opclass
consistentFn, resulting in probing many heap pages that didn't really need to
be visited. In Artur's example case, a query like
WHERE tsvector @@ to_tsquery('a & b')
was about 50X slower than the theoretically equivalent
WHERE tsvector @@ to_tsquery('a') AND tsvector @@ to_tsquery('b')
The way that I chose to fix this was to have GIN call the consistentFn
twice with both TRUE and FALSE values for the in-doubt entry stream,
returning a hit if either call produces TRUE, but not if they both return
FALSE. The code handles this for the case of a single in-doubt entry stream,
but punts (falling back to the stupid behavior) if there's more than one lossy
reference to the same page. The idea could be scaled up to deal with multiple
lossy references, but I think that would probably be wasted complexity. At
least to judge by Artur's example, such cases don't occur often enough to be
worth trying to optimize.
Back-patch to 8.4. 8.3 did not have lossy GIN index pointers, so not
subject to these problems.
several places, but for now only GIN uses it during index creation.
Using self-balanced tree greatly speeds up index creation in corner cases
with preordered data.
VACUUM FULL INPLACE), along with a boatload of subsidiary code and complexity.
Per discussion, the use case for this method of vacuuming is no longer large
enough to justify maintaining it; not to mention that we don't wish to invest
the work that would be needed to make it play nicely with Hot Standby.
Aside from the code directly related to old-style VACUUM FULL, this commit
removes support for certain WAL record types that could only be generated
within VACUUM FULL, redirect-pointer removal in heap_page_prune, and
nontransactional generation of cache invalidation sinval messages (the last
being the sticking point for Hot Standby).
We still have to retain all code that copes with finding HEAP_MOVED_OFF and
HEAP_MOVED_IN flag bits on existing tuples. This can't be removed as long
as we want to support in-place update from pre-9.0 databases.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
User-defined consistent functions believes the check array
contains at least one true element which was not a true for
scanning pending list.
Per report from Yury Don <yura@vpcit.ru>
tuple size limit. Improve the error message for index-tuple-too-large
so that it includes the actual size, the limit, and the index name.
Sync with the btree occurrences of the same error.
Back-patch to 8.4 because it appears that the out-of-sync problem
is occurring in the field.
Teodor and Tom
In practice these mistakes were always masked when full_page_writes was on,
because XLogInsert would always choose to log the full page, and then
ginRedoInsertListPage wouldn't try to do anything. But with full_page_writes
off a WAL replay failure was certain.
The GIN_INSERT_LISTPAGE record type could probably be eliminated entirely
in favor of using XLOG_HEAP_NEWPAGE, but I refrained from doing that now
since it would have required a significantly more invasive patch.
In passing do a little bit of code cleanup, including making the accounting
for free space on GIN list pages more precise. (This wasn't a bug as the
errors were always in the conservative direction.)
Per report from Simon. Back-patch to 8.4 which contains the identical code.
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
behavior in cases where we don't know the heap tuple count accurately; in
particular partial vacuum, but this also makes the API a bit more useful
for ANALYZE. This patch adds "estimated_count" flags to both structs so
that an approximate count can be flagged as such, and adjusts the logic
so that approximate counts are not used for updating pg_class.reltuples.
This fixes my previous complaint that VACUUM was putting ridiculous values
into pg_class.reltuples for indexes. The actual impact of that bug is
limited, because the planner only pays attention to reltuples for an index
if the index is partial; which probably explains why beta testers hadn't
noticed a degradation in plan quality from it. But it needs to be fixed.
The whole thing is a bit messy and should be redesigned in future, because
reltuples now has the potential to drift quite far away from reality when
a long period elapses with no non-partial vacuums. But this is as good as
it's going to get for 8.4.
is supposed to remove duplicate heap TIDs, we have to be sure to reduce the
tuple size and posting-item count accordingly in addItemPointersToTuple().
Failing to do so resulted in the effective injection of garbage TIDs into the
index contents, ie, whatever happened to be in the memory palloc'd for the
new tuple. I'm not sure that this fully explains the index corruption
reported by Tatsuo Ishii, but the test case I'm using no longer fails.
method to pass extra data to the consistent() and comparePartial() methods.
This is the core infrastructure needed to support the soon-to-appear
contrib/btree_gin module. The APIs are still upward compatible with the
definitions used in 8.3 and before, although *not* with the previous 8.4devel
function definitions.
catversion bump for changes in pg_proc entries (although these are just
cosmetic, since GIN doesn't actually look at the function signature before
calling it...)
Teodor Sigaev and Oleg Bartunov
them from degrading badly when the input is sorted or nearly so. In this
scenario the tree is unbalanced to the point of becoming a mere linked list,
so insertions become O(N^2). The easiest and most safely back-patchable
solution is to stop growing the tree sooner, ie limit the growth of N. We
might later consider a rebalancing tree algorithm, but it's not clear that
the benefit would be worth the cost and complexity. Per report from Sergey
Burladyan and an earlier complaint from Heikki.
Back-patch to 8.2; older versions didn't have GIN indexes.
multiple index entries in a holding area before adding them to the main index
structure. This helps because bulk insert is (usually) significantly faster
than retail insert for GIN.
This patch also removes GIN support for amgettuple-style index scans. The
API defined for amgettuple is difficult to support with fastupdate, and
the previously committed partial-match feature didn't really work with
it either. We might eventually figure a way to put back amgettuple
support, but it won't happen for 8.4.
catversion bumped because of change in GIN's pg_am entry, and because
the format of GIN indexes changed on-disk (there's a metapage now,
and possibly a pending list).
Teodor Sigaev
be used instead of the normal exclusive lock, and make WAL redo functions
responsible for calling RestoreBkpBlocks(). They know better what kind of a
lock they need.
At the moment, this just moves things around with no functional change, but
makes the hot standby patch that's under review cleaner.
bitmap. This is extracted from Greg Stark's posix_fadvise patch; it seems
worth committing separately, since it's potentially useful independently of
posix_fadvise.
a more complete framework for writing custom option processing routines
by user-defined access methods.
Catalog version bumped due to the general API changes, which are going to
affect user-defined "amoptions" routines.
truncations in FSM code, call FreeSpaceMapTruncateRel from smgr_redo. To
make that cleaner from modularity point of view, move the WAL-logging one
level up to RelationTruncate, and move RelationTruncate and all the
related WAL-logging to new src/backend/catalog/storage.c file. Introduce
new RelationCreateStorage and RelationDropStorage functions that are used
instead of calling smgrcreate/smgrscheduleunlink directly. Move the
pending rel deletion stuff from smgrcreate/smgrscheduleunlink to the new
functions. This leaves smgr.c as a thin wrapper around md.c; all the
transactional stuff is now in storage.c.
This will make it easier to add new forks with similar truncation logic,
like the visibility map.
for inserting tuples in increasing TID order. It's not clear whether this
fully explains Ivan Sergio Borgonovo's complaint, but simple testing
confirms that a scan that doesn't start at block 0 can slow GIN build by
a factor of three or four.
Backpatch to 8.3. Sync scan didn't exist before that.
functions into one ReadBufferExtended function, that takes the strategy
and mode as argument. There's three modes, RBM_NORMAL which is the default
used by plain ReadBuffer(), RBM_ZERO, which replaces ZeroOrReadBuffer, and
a new mode RBM_ZERO_ON_ERROR, which allows callers to read corrupt pages
without throwing an error. The FSM needs the new mode to recover from
corrupt pages, which could happend if we crash after extending an FSM file,
and the new page is "torn".
Add fork number to some error messages in bufmgr.c, that still lacked it.
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
space is tracked via GetMemoryChunkSpace, there's really no advantage
to duplicating datumCopy's innards here. This is one bit of my toast
indirection patch that should go in anyway.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
forks. XLogOpenRelation() and the associated light-weight relation cache in
xlogutils.c is gone, and XLogReadBuffer() now takes a RelFileNode as argument,
instead of Relation.
For functions that still need a Relation struct during WAL replay, there's a
new function called CreateFakeRelcacheEntry() that returns a fake entry like
XLogOpenRelation() used to.
more logical that way, and also it reduces the amount of unnecessary includes
in bufpage.h, which is widely used.
Zdenek Kotala.
My previous patch to bufpage.h should also have credited him as author, but I
forgot (sorry about that).
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
<craig@postnewspapers.com.au>.
It was my mistake, I missed limitation of number of held locks, now GIN doesn't
use continiuous locks, but still hold buffers pinned to prevent interference
with vacuum's deletion algorithm.
Backpatch is needed.
"consistent" functions, and remove pg_amop.opreqcheck, as per recent
discussion. The main immediate benefit of this is that we no longer need
8.3's ugly hack of requiring @@@ rather than @@ to test weight-using tsquery
searches on GIN indexes. In future it should be possible to optimize some
other queries better than is done now, by detecting at runtime whether the
index match is exact or not.
Tom Lane, after an idea of Heikki's, and with some help from Teodor.
instead of plan time. Extend the amgettuple API so that the index AM returns
a boolean indicating whether the indexquals need to be rechecked, and make
that rechecking happen in nodeIndexscan.c (currently the only place where
it's expected to be needed; other callers of index_getnext are just erroring
out for now). For the moment, GIN and GIST have stub logic that just always
sets the recheck flag to TRUE --- I'm hoping to get Teodor to handle pushing
that control down to the opclass consistent() functions. The planner no
longer pays any attention to amopreqcheck, and that catalog column will go
away in due course.
indexscan always occurs in one call, and the results are returned in a
TIDBitmap instead of a limited-size array of TIDs. This should improve
speed a little by reducing AM entry/exit overhead, and it is necessary
infrastructure if we are ever to support bitmap indexes.
In an only slightly related change, add support for TIDBitmaps to preserve
(somewhat lossily) the knowledge that particular TIDs reported by an index
need to have their quals rechecked when the heap is visited. This facility
is not really used yet; we'll need to extend the forced-recheck feature to
plain indexscans before it's useful, and that hasn't been coded yet.
The intent is to use it to clean up 8.3's horrid @@@ kluge for text search
with weighted queries. There might be other uses in future, but that one
alone is sufficient reason.
Heikki Linnakangas, with some adjustments by me.
GetMemoryChunkSpace, not just the palloc request size. This brings the
allocatedMemory counter close enough to reality (as measured by
MemoryContextStats printouts) that I think we can get rid of the arbitrary
factor-of-2 adjustment that was put into the code initially. Given the
sensitivity of GIN build to work memory size, not using as much of work
memory as we're allowed to seems a pretty bad idea.
ginRedoInsert(), because other ginRedo* functions rewrite whole page or
make changes which could be applied several times without consistent's loss
- Remove check of identifying of corresponding split record:
it's possible that replaying of WAL starts after actual page split, but before
removing of that split from incomplete splits list. In this case, that check
cause FATAL error.
Per stress test which reproduces bug reported by Craig McElroy
<craig.mcelroy@contegix.com>
usage of any information from system catalog, because it could be called during
replay of WAL.
Per bug report from Craig McElroy <craig.mcelroy@contegix.com>. Patch doesn't
change on-disk storage.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
than two independent bits (one of which was never used in heap pages anyway,
or at least hadn't been in a very long time). This gives us flexibility to
add the HOT notions of redirected and dead item pointers without requiring
anything so klugy as magic values of lp_off and lp_len. The state values
are chosen so that for the states currently in use (pre-HOT) there is no
change in the physical representation.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
- Fix possible deadlock between UPDATE and VACUUM queries. Bug never was
observed in 8.2, but it still exist there. HEAD is more sensitive to
bug after recent "ring" of buffer improvements.
- Fix WAL creation: if parent page is stored as is after split then
incomplete split isn't removed during replay. This happens rather rare, only
on large tables with a lot of updates/inserts.
- Fix WAL replay: there was wrong test of XLR_BKP_BLOCK_* for left
page after deletion of page. That causes wrong rightlink field: it pointed
to deleted page.
- add checking of match of clearing incomplete split
- cleanup incomplete split list after proceeding
All of this chages doesn't change on-disk storage, so backpatch...
But second point may be an issue for replaying logs from previous version.
and aborted transactions have different effects; also teach it not to assume
that prepared transactions are always committed.
Along the way, simplify the pgstats API by tying counting directly to
Relations; I cannot detect any redeeming social value in having stats
pointers in HeapScanDesc and IndexScanDesc structures. And fix a few
corner cases in which counts might be missed because the relation's
pgstat_info pointer hadn't been set.
In this case extractQuery should returns -1 as nentries. This changes
prototype of extractQuery method to use int32* instead of uint32* for
nentries argument.
Based on that gincostestimate may see two corner cases: nothing will be found
or seqscan should be used.
Per proposal at http://archives.postgresql.org/pgsql-hackers/2007-01/msg01581.php
PS tsearch_core patch should be sightly modified to support changes, but I'm
waiting a verdict about reviewing of tsearch_core patch.
remove page on next level linked from next inner page, ginScanToDelete()
wrongly sets parent page. Bug reveals when many item pointers from index
was deleted ( several hundred thousands).
Bug is discovered by hubert depesz lubaczewski <depesz@gmail.com>
Suppose, we need rc2 before release...
static variables. This avoids any risk of potential non-reentrancy,
and in particular offers a much cleaner workaround for the Intel compiler
bug that was affecting ginutil.c.
even when a single relation requires more than max_fsm_pages pages. Also,
make VACUUM emit a warning in this case, since it likely means that VACUUM
FULL or other drastic corrective measure is needed. Per reports from Jeff
Frost and others of unexpected changes in the claimed max_fsm_pages need.
we probably should make them work reliably for all arrays. Fix code
to handle NULLs and multidimensional arrays, move it into arrayfuncs.c.
GIN is still restricted to indexing arrays with no null elements, however.
agreed these symbols are less easily confused. I made new pg_operator
entries (with new OIDs) for the old names, so as to provide backward
compatibility while making it pretty easy to remove the old names in
some future release cycle. This commit only touches the core datatypes,
contrib will be fixed separately.
Teodor Sigaev
Heikki Linnakangas
Bruce Momjian
Magnus Hagander
Alvaro Herrera
Tom Lane
Fujii Masao
Andres Freund
Robert Haas
Noah Misch
Simon Riggs
Peter Eisentraut
Neil Conway