backwards scan could actually happen. In particular, pass a flag to
materialize-mode SRFs that tells them whether they need to require random
access. In passing, also suppress unneeded backward-scan overhead for a
Portal's holdStore tuplestore. Per my proposal about reducing I/O costs for
tuplestores.
via a tuplestore instead of value-per-call. Refactor a few things to reduce
ensuing code duplication with nodeFunctionscan.c. This represents the
reasonably noncontroversial part of my proposed patch to switch SQL functions
over to returning tuplestores. For the moment, SQL functions still do things
the old way. However, this change enables PL SRFs to be called in targetlists
(observe changes in plperl regression results).
didn't actually work, because nodeRecursiveunion.c creates the underlying
tuplestore with backward scan disabled; which is a decision that we shouldn't
reverse because of performance cost. We could imagine adding signaling from
WorkTableScan to RecursiveUnion about whether backward scan is needed ...
but in practice it'd be a waste of effort, because there simply isn't any
current or plausible future scenario where WorkTableScan would be called on
to scan backward. So just dike out the code that claims to support it.
written to temp files by tuplesort.c and tuplestore.c. This saves 2 bytes per
row for 32-bit machines, and 6 bytes per row for 64-bit machines, which seems
worth the slight additional uglification of the tuple read/write routines.
recursion when we are unable to convert a localized error message to the
client's encoding. We've been over this ground before, but as reported by
Ibrar Ahmed, it still didn't work in the case of conversion failures for
the conversion-failure message itself :-(. Fix by installing a "circuit
breaker" that disables attempts to localize this message once we get into
recursion trouble.
Patch all supported branches, because it is in fact broken in all of them;
though I had to add some missing translations to the older branches in
order to expose the failure in the particular test case I was using.
after each other (since we already add a newline on each, this makes them
multiline).
Previously a new error would just overwrite the old one, so for example any
error caused when trying to connect with SSL enabled would be overwritten
by the error message form the non-SSL connection when using sslmode=prefer.
treat Var and non-Var IN-list items differently. Only non-Var items are
candidates to go into an ANY(ARRAY) construct --- we put all Vars as separate
OR conditions on the grounds that that leaves more scope for optimization.
Per suggestion from Robert Haas.
into an OR of equality comparisons, rather than x = ANY(ARRAY[...]), when there
are Vars in the right-hand side. This avoids a performance regression compared
to pre-8.2 releases, in cases where the OR form can be optimized into scans
of multiple indexes. Limit the possible downside by preferring this form only
when the list isn't very long (I set the cutoff at 32 elements, which is a
bit arbitrary but in the right ballpark). Per discussion with Jim Nasby.
In passing, also make it try the OR form if it cannot select a common type
for the array elements; we've seen a complaint or two about how the OR form
worked for such cases and ARRAY doesn't.
recent proposal. In typical cases, we now need 12 bytes per insert or delete
event and 16 bytes per update event; previously we needed 40 bytes per
event on 32-bit hardware and 80 bytes per event on 64-bit hardware. Even
in the worst case usage pattern with a large number of distinct triggers being
fired in one query, usage is at most 32 bytes per event. It seems to be a
bit faster than the old code as well, due to reduction of palloc overhead.
This commit doesn't address the TODO item of allowing the event list to spill
to disk; rather it's trying to stave off the need for that. However, it
probably makes that task a bit easier by reducing the data structure's
dependency on pointers. It would now be practical to dump an event list to
disk by "chunks" instead of individual events.
of copy/paste:d emails. Much of the contents had already been migrated
into the main documentation, some was out of date and some just plain
wrong.
Keep the "protocol-flowchart" which can still be useful.
in their targetlists had better reset ps_TupFromTlist during ReScan calls.
There's no need to back-patch here since nodeAgg and nodeGroup didn't
even pretend to support SRFs in prior releases.
* make LDAP use this instead of the hacky previous method to specify
the DN to bind as
* make all auth options behave the same when they are not compiled
into the server
* rename "ident maps" to "user name maps", and support them for all
auth methods that provide an external username
This makes a backwards incompatible change in the format of pg_hba.conf
for the ident, PAM and LDAP authentication methods.
inputs is unique or nearly so), make eqjoinsel() clamp the ndistinct estimates
to be not more than the estimated number of rows coming from the input
relations. This allows the estimate to change in response to the selectivity
of restriction conditions on the inputs.
This is a pretty narrow patch and maybe we should be more aggressive about
similarly clamping ndistinct in other cases; but I'm worried about
double-counting the effects of the restriction conditions. However, it seems
to help for the case exhibited by Grzegorz Jaskiewicz (antijoin against a
small subset of a relation), so let's try this for awhile.
until vars are distributed to rels during query_planner() startup. We don't
really need it before that, and not building it early has some advantages.
First, we don't need to put it through the various preprocessing steps, which
saves some cycles and eliminates the need for a number of routines to support
PlaceHolderInfo nodes at all. Second, this means one less unused plan for any
sub-SELECT appearing in a placeholder's expression, since we don't build
placeholder_list until after sublink expansion is complete.
correctly set. As result, killtuple() marks as dead
wrong tuple on page. Bug was introduced by me while fixing
possible duplicates during GiST index scan.
that represent some expression that we desire to compute below the top level
of the plan, and then let that value "bubble up" as though it were a plain
Var (ie, a column value).
The immediate application is to allow sub-selects to be flattened even when
they are below an outer join and have non-nullable output expressions.
Formerly we couldn't flatten because such an expression wouldn't properly
go to NULL when evaluated above the outer join. Now, we wrap it in a
PlaceHolderVar and arrange for the actual evaluation to occur below the outer
join. When the resulting Var bubbles up through the join, it will be set to
NULL if necessary, yielding the correct results. This fixes a planner
limitation that's existed since 7.1.
In future we might want to use this mechanism to re-introduce some form of
Hellerstein's "expensive functions" optimization, ie place the evaluation of
an expensive function at the most suitable point in the plan tree.
This patch eliminates the marking of subtransactions as SUBCOMMITTED in pg_clog
during their commit; instead they remain in-progress until main transaction
commit. At main transaction commit, the commit protocol is atomic-by-page
instead of one transaction at a time. To avoid a race condition with some
subtransactions appearing committed before others in the case where they span
more than one pg_clog page, we conserve the logic that marks them subcommitted
before marking the parent committed.
Simon Riggs with minor help from me
scanning; GiST and GIN do not, and it seems like too much trouble to make
them do so. By teaching ExecSupportsBackwardScan() about this restriction,
we ensure that the planner will protect a scroll cursor from the problem
by adding a Materialize node.
In passing, fix another longstanding bug in the same area: backwards scan of
a plan with set-returning functions in the targetlist did not work either,
since the TupFromTlist expansion code pays no attention to direction (and
has no way to run a SRF backwards anyway). Again the fix is to make
ExecSupportsBackwardScan check this restriction.
Also adjust the index AM API specification to note that mark/restore support
is unnecessary if the AM can't produce ordered output.
set_rel_width(). The code had been catering for the possibility of different
varnos in the relation targetlist, but this is impossible for a base relation
(and if it were possible, putting all the widths in the same RelOptInfo would
be wrong anyway).
is NULL but SK_SEARCHNULL is not set. Add checking IS NULL of keys
to set during key initialization. If key is NULL and SK_SEARCHNULL is not
set then nothnig can be satisfied.
With assert-enabled compilation that causes coredump.
Bug was introduced in 8.3 by support of IS NULL index scan.
In the previous coding, the list of columns that needed to be hashed on
was allocated in the per-query context, but we reallocated every time
the Agg node was rescanned. Since this information doesn't change over
a rescan, just construct the list of columns once during ExecInitAgg().
according to the TupleDesc's natts, not the number of physical columns in the
tuple. The previous coding would do the wrong thing in cases where natts is
different from the tuple's column count: either incorrectly report error when
it should just treat the column as null, or actually crash due to indexing off
the end of the TupleDesc's attribute array. (The second case is probably not
possible in modern PG versions, due to more careful handling of inheritance
cases than we once had. But it's still a clear lack of robustness here.)
The incorrect error indication is ignored by all callers within the core PG
distribution, so this bug has no symptoms visible within the core code, but
it might well be an issue for add-on packages. So patch all the way back.
lengthof(SysAtt) not FirstLowInvalidHeapAttributeNumber, for consistency with
the other uses of the SysAtt array, and to make it clearer that it doesn't
walk off the end of that array.
Formerly, the lack of any opclasses that could accept such data was enough
of a defense, but now with a "record" opclass we need to check more carefully.
(You can still use that opclass for an index, but you have to store a named
composite type not an anonymous one.)
the timestamp types. Turns out this doesn't even reduce the available
range of dates, since the restriction to dates that work for Julian-date
arithmetic is much tighter than the int32 range anyway. Per a longstanding
TODO item.
depth-first search order. Upon close reading of SQL:2008, it seems that the
spec's SEARCH DEPTH FIRST and SEARCH BREADTH FIRST options do not actually
guarantee any particular result order: what they do is provide a constructed
column that the user can then sort on in the outer query. So this is actually
just as much functionality ...
pseudo-type record[] to represent arrays of possibly-anonymous composite
types. Since composite datums carry their own type identification, no
extra knowledge is needed at the array level.
The main reason for doing this right now is that it is necessary to support
the general case of detection of cycles in recursive queries: if you need to
compare more than one column to detect a cycle, you need to compare a ROW()
to an array built from ROW()s, at least if you want to do it as the spec
suggests. Add some documentation and regression tests concerning the cycle
detection issue.
RecursiveUnion to which it refers. It turns out that we can just postpone the
relevant initialization steps until the first exec call for the node, by which
time the ancestor node must surely be initialized. Per report from Greg Stark.
the isTrigger state explicitly, not rely on nonzero-ness of trigrelOid
to indicate trigger-hood, because trigrelOid will be left zero when compiling
for validation. The (useless) function hash entry built by the validator
was able to match an ordinary non-trigger call later in the same session,
thereby bypassing the check that is supposed to prevent such a call.
Per report from Alvaro.
It might be worth suppressing the useless hash entry altogether, but
that's a bigger change than I want to consider back-patching.
Back-patch to 8.0. 7.4 doesn't have the problem because it doesn't
have validation mode.
to process any pending unlinks for the source database.
Before, if you dropped a relation in the template database just before
CREATE DATABASE, and a checkpoint happened during copydir(), the checkpoint
might delete a file that we're just about to copy, causing lstat() in
copydir() to fail with ENOENT.
Backpatch to 8.3, where the pending unlinks were introduced.
Per report by Matthew Wakeling and analysis by Tom Lane.
of referencing a WITH item that's not yet in scope according to the SQL
spec's semantics. This seems to be an easy error to make, and the bare
"relation doesn't exist" message doesn't lead one's mind in the correct
direction to fix it.
implementation uses an in-memory hash table, so it will poop out for very
large recursive results ... but the performance characteristics of a
sort-based implementation would be pretty unpleasant too.
use the old relfilenode in the new tablespace. There might be another relation
in the new tablespace with the same relfilenode, so we must generate a fresh
relfilenode in the new tablespace.
The 8.3 patch to let deleted relation files linger as zero-length files until
the next checkpoint made this more obvious: moving a relation from one table
space another, and then back again, caused a collision with the lingering
file.
Back-patch to 8.1. The issue is present in 8.0 as well, but it doesn't seem
worth fixing there, because we didn't have protection from OID collisions
after OID wraparound before 8.1.
Report by Guillaume Lelarge.
supplies an expression that can't be coerced to the target column type.
The code previously attempted to point at the target column name, which
doesn't work at all in an INSERT with omitted column name list, and is
also not remarkably helpful when the problem is buried somewhere in a
long INSERT-multi-VALUES command. Make it point at the failed expression
instead.
get_name_for_var_field didn't have enough context to interpret a reference to
a CTE query's output. Fixing this requires separate hacks for the regular
deparse case (pg_get_ruledef) and for the EXPLAIN case, since the available
context information is quite different. It's pretty nearly parallel to the
existing code for SUBQUERY RTEs, though. Also, add code to make sure we
qualify a relation name that matches a CTE name; else the CTE will mistakenly
capture the reference when reloading the rule.
In passing, fix a pre-existing problem with get_name_for_var_field not working
on variables in targetlists of SubqueryScan plan nodes. Although latent all
along, this wasn't a problem until we made EXPLAIN VERBOSE try to print
targetlists. To do this, refactor the deparse_context_for_plan API so that
the special case for SubqueryScan is all on ruleutils.c's side.
the column alias names of the RTE referenced by the Var to the RowExpr.
This is needed to allow ruleutils.c to correctly deparse FieldSelect nodes
referencing such a construct. Per my recent bug report.
Adding a field to RowExpr forces initdb (because of stored rules changes)
so this solution is not back-patchable; which is unfortunate because 8.2
and 8.3 have this issue. But it only affects EXPLAIN for some pretty odd
corner cases, so we can probably live without a solution for the back
branches.
relation forks. While the file names are not visible to users, for those
that do peek into the data directory, it's nice to have more descriptive
names. Per Greg Stark's suggestion.
well as regular tables. Per discussion, this seems necessary to meet the
principle of least astonishment.
In passing, simplify the error messages in warnAutoRange(). Now that we
have parser error position info for these errors, it doesn't seem very
useful to word the error message differently depending on whether we are
inside a sub-select or not.
machine produces zero (rather than the more usual minimum-possible-integer)
for the only possible overflow case. This has been seen to occur for at least
some word widths on some hardware, and it's cheap enough to check for
everywhere. Per Peter's analysis of buildfarm reports.
This could be back-patched, but in the absence of any gripes from the field
I doubt it's worth the trouble.
recursive CTE that we're still in progress of analyzing. Add a similar guard
to the similar code in expandRecordVariable(), and tweak regression tests to
cover this case. Per report from Dickson S. Guedes.
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
name of a fork ('main' or 'fsm', at the moment) to pg_relation_size() to
get the size of a specific fork. Defaults to 'main', if none given.
While we're at it, modify pg_relation_size to take a regclass as argument,
instead of separate variants taking oid and name. This change is
transparent to typical use where the table name is passed as a string
literal, like pg_relation_size('table'), but will break queries like
pg_relation_size(namecol), where namecol is of type name. text-type input
still works, and using a non-schema-qualified table name is not very
reliable anyway, so this is unlikely to break anyone's queries in practice.
This facility replaces the former mark/restore support but is otherwise
upward-compatible with previous uses. It's expected to be needed for
single evaluation of CTEs and also for window functions, so I'm committing
it separately instead of waiting for either one of those patches to be
finished. Per discussion with Greg Stark and Hitoshi Harada.
Note: I removed nodeFunctionscan's mark/restore support, instead of bothering
to update it for this change, because it was dead code anyway.
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
applied to expression indexes, not to plain relations. The original coding
in btcostestimate conflated the two cases, but it's not hard to use
get_relation_stats_hook instead when we're looking to the underlying relation.
(ie, has nothing to quote), rather than silently ignoring the character as has
been our historical behavior. This is required by SQL spec and should help
reduce the sort of user confusion seen in bug #4436. Per discussion.
This is not so much a bug fix as a definitional change, and it could break
existing applications; so not back-patched. It might deserve being mentioned
as an incompatibility in the 8.4 release notes.
element types. Since the backend doesn't actually pay attention to the array
type's delimiter, this has no functional effect, but it seems better for the
catalog entries to be consistent. Per gripe from Greg Mullane and subsequent
discussion.
a SubLink expression into a rule query. We missed cases where the original
query contained a sub-SELECT in a function in FROM, a multi-row VALUES list,
or a RETURNING list. Per bug #4434 from Dean Rasheed and subsequent
investigation.
Back-patch to 8.1; older releases don't have the issue because they didn't
try to be smart about setting hasSubLinks only when needed.
ctype are now more like encoding, stored in new datcollate and datctype
columns in pg_database.
This is a stripped-down version of Radek Strnad's patch, with further
changes by me.
that presence of the password in the conninfo string must be checked *before*
risking a connection attempt, there is no point in checking it afterwards.
This makes the specification of PQconnectionUsedPassword() a bit simpler
and perhaps more generally useful, too.
conninfo string *before* trying to connect to the remote server, not after.
As pointed out by Marko Kreen, in certain not-very-plausible situations
this could result in sending a password from the postgres user's .pgpass file,
or other places that non-superusers shouldn't have access to, to an
untrustworthy remote server. The cleanest fix seems to be to expose libpq's
conninfo-string-parsing code so that dblink can check for a password option
without duplicating the parsing logic.
Joe Conway, with a little cleanup by Tom Lane
instead of listing all the columns returned by the underlying function.
initdb not forced since this patch doesn't actually change anything about
the stored form of the views. It just means there's one less place to change
if someone wants to add columns to them.
sequence of operations that libpq goes through while creating a PGresult.
Also, remove ill-considered "const" decoration on parameters passed to
event procedures.
guarantees about whether event procedures will receive DESTROY events.
They no longer need to defend themselves against getting a DESTROY
without a successful prior CREATE.
Andrew Chernow
bison output. Without these, make can sometimes be tempted to invoke its
built-in rules using lex and yacc, which can fail if those commands are not
available.
This was a main cause for the NLS web site breakage.
there are FD_XACT_TEMPORARY files to clean up at transaction end.
Per performance profiling results on AWeber's huge systems.
Patch by me after an idea suggested by Simon Riggs.
interpreted as expected (the sign should affect months too), and get rid of
hard-wired assumption that unmarked signed values must be hours (if integers)
or seconds (if floats). The former was just a bug in my previous patch,
while the latter may have made sense at one time but seems illogical now
that we support determination of the units from typmod information.
Ron Mayer and myself.
forestalls potential overflow when the same table (or other object, but
usually tables) is accessed by very many successive queries within a single
transaction. Per report from Michael Milligan.
Back-patch to 8.0, which is as far back as the patch conveniently applies.
There have been no reports of overflow in pre-8.3 releases, but clearly the
risk existed all along. (Michael's report suggests that 8.3 may consume lock
counts faster than prior releases, but with no test case to look at it's hard
to be sure about that. Widening the counts seems a good future-proofing
measure in any event.)
we regenerate the SQL query text not merely the plan derived from it. This
is needed to handle contingencies such as renaming of a table or column
used in an FK. Pre-8.3, such cases worked despite the lack of replanning
(because the cached plan needn't actually change), so this is a regression.
Per bug #4417 from Benjamin Bihler.
value. This means that hash index lookups are always lossy and have to be
rechecked when the heap is visited; however, the gain in index compactness
outweighs this when the indexed values are wide. Also, we only need to
perform datatype comparisons when the hash codes match exactly, rather than
for every entry in the hash bucket; so it could also win for datatypes that
have expensive comparison functions. A small additional win is gained by
keeping hash index pages sorted by hash code and using binary search to reduce
the number of index tuples we have to look at.
Xiao Meng
This commit also incorporates Zdenek Kotala's patch to isolate hash metapages
and hash bitmaps a bit better from the page header datastructures.
each connection. This makes it possible to catch errors in the pg_hba
file when it's being reloaded, instead of silently reloading a broken
file and failing only when a user tries to connect.
This patch also makes the "sameuser" argument to ident authentication
optional.
btree. We can't easily tell whether clauses generated from the equivalence
class could be used with such an index, so just assume that they might be.
This bit of over-optimization prevented use of non-btree indexes for nestloop
inner indexscans, in any case where the join uses an equality operator that
is also a btree operator --- which in particular is typically true for hash
indexes. Noted while trying to test the current hash index patch.
and the literal syntax INTERVAL 'string' ... SECOND(n), as required by the
SQL standard. Our old syntax put (n) directly after INTERVAL, which was
a mistake, but will still be accepted for backward compatibility as well
as symmetry with the TIMESTAMP cases.
Change intervaltypmodout to show it in the spec's way, too. (This could
potentially affect clients, if there are any that analyze the typmod of an
INTERVAL in any detail.)
Also fix interval input to handle 'min:sec.frac' properly; I had overlooked
this case in my previous patch.
Document the use of the interval fields qualifier, which up to now we had
never mentioned in the docs. (I think the omission was intentional because
it didn't work per spec; but it does now, or at least close enough to be
credible.)
GetOldestXmin() instead of RecentGlobalXmin; this is safer because we do not
depend on the latter being correctly set elsewhere, and while it is more
expensive, this code path is not performance-critical. This is a real
risk for autovacuum, because it can execute whole cycles without doing
a single vacuum, which would mean that RecentGlobalXmin would stay at its
initialization value, FirstNormalTransactionId, causing a bogus value to be
inserted in pg_database. This bug could explain some recent reports of
failure to truncate pg_clog.
At the same time, change the initialization of RecentGlobalXmin to
InvalidTransactionId, and ensure that it's set to something else whenever
it's going to be used. Using it as FirstNormalTransactionId in HOT page
pruning could incur in data loss. InitPostgres takes care of setting it
to a valid value, but the extra checks are there to prevent "special"
backends from behaving in unusual ways.
Per Tom Lane's detailed problem dissection in 29544.1221061979@sss.pgh.pa.us
a lot closer than it was before). To do this, tweak coerce_type() to pass
through the typmod information when invoking interval_in() on an UNKNOWN
constant; then fix DecodeInterval to pay attention to the typmod when deciding
how to interpret a units-less integer value. I changed one or two other
details as well. I believe the code now reacts as expected by spec for all
the literal syntaxes that are specifically enumerated in the spec. There
are corner cases involving strings that don't exactly match the set of fields
called out by the typmod, for which we might want to tweak the behavior some
more; but I think this is an area of user friendliness rather than spec
compliance. There remain some non-compliant details about the SQL syntax
(as opposed to what's inside the literal string); but at least we'll throw
error rather than silently doing the wrong thing in those cases.
when user-defined functions used in a plan are modified. Also invalidate
plans when schemas, operators, or operator classes are modified; but for these
cases we just invalidate everything rather than tracking exact dependencies,
since these types of objects seldom change in a production database.
Tom Lane; loosely based on a patch by Martin Pihlak.
for pg_stop_backup. First, it is possible that the history file name is not
alphabetically later than the last WAL file name, so we should explicitly
check that both have been archived. Second, the previous coding would wait
forever if a checkpoint had managed to remove the WAL file before we look for
it.
Simon Riggs, plus some code cleanup by me.
referenced tables are dumped before the referencing tables. This avoids
failures when the data is loaded with the FK constraints already active.
If no such ordering is possible because of circular or self-referential
constraints, print a NOTICE to warn the user about it.
searching instead of naive matching. In the worst case this has the same
O(M*N) complexity as the naive method, but the worst case is hard to hit,
and the average case is very fast, especially with longer patterns.
David Rowley
for editing if no function name is specified. This seems a much cleaner way
to offer that functionality than the original patch had. In passing,
de-clutter the error displays that are given for a bogus function-name
argument, and standardize on "$function$" as the default delimiter for the
function body. (The original coding would use the shortest possible
dollar-quote delimiter, which seems to create unnecessarily high risk of
later conflicts with the user-modified function body.)
In support of that, create a backend function pg_get_functiondef().
The psql command is functional but maybe a bit rough around the edges...
Abhijit Menon-Sen
inserting a materialize node above an inner-side sort node, when the sort is
expected to spill to disk. (The materialize protects the sort from having
to support mark/restore, allowing it to do its final merge pass on-the-fly.)
We neglected to teach cost_mergejoin about that hack, so it was failing to
include the materialize's costs in the estimated cost of the mergejoin.
The materialize's costs are generally going to be pretty negligible in
comparison to the sort's, so this is only a small error and probably not
worth back-patching; but it's still wrong.
In the similar case where a materialize is inserted to protect an inner-side
node that can't do mark/restore at all, it's still true that the materialize
should not spill to disk, and so we should cost it cheaply rather than
expensively.
Noted while thinking about a question from Tom Raney.
during parsing. Formerly the parser's stack was allocated with malloc
and so wouldn't be reclaimed; this patch makes it use palloc instead,
so that flushing the current context will reclaim the memory. Per
Marko Kreen.
whenever possible, as per bug report from Oleg Serov. While at it, reorder
the operations in the RECORD case to avoid possible palloc failure while the
variable update is only partly complete.
Back-patch as far as 8.1. Although the code of the particular function is
similar in 8.0, 8.0's support for composite fields in rows is sufficiently
broken elsewhere that it doesn't seem worth fixing this.
output that is seen when a checkpoint occurs at just the right time during
the test. Per my report of 2008-08-31.
This could be back-patched but I'm not sure it's worth the trouble.
command id is the cmin, when it can in fact be a combo cid. That made rows
incorrectly invisible to a transaction where a tuple was deleted by multiple
aborted subtransactions.
Report and patch Karl Schnaitter. Back-patch to 8.3, where combo cids was
introduced.
SELECT foo.*) so that it cannot be confused with a quoted identifier "*".
Instead create a separate node type A_Star to represent this notation.
Per pgsql-hackers discussion of 2007-Sep-27.
syntax to avoid a useless store into a global variable. Per experimentation,
this works better than my original thought of trying to push the code into
an out-of-line subroutine.
clear to me why I'd not seen this message before --- on F-9 it seems to
only happen if Asserts are disabled, which ought to be irrelevant.
Maybe that affects a decision whether to inline get_ten(), which would
be needed to expose the warning condition to the compiler? Anyway,
the fix is clear.
most node types used in expression trees (both before and after parse
analysis). This allows us to place an error cursor in many situations
where we formerly could not, because the information wasn't available
beyond the very first level of parse analysis. There's a fair amount
of work still to be done to persuade individual ereport() calls to actually
include an error location, but this gets the initdb-forcing part of the
work out of the way; and the situation is already markedly better than
before for complaints about unimplementable implicit casts, such as
CASE and UNION constructs with incompatible alternative data types.
Per my proposal of a few days ago.
when its input is constant and the element coercion function is immutable
(or nonexistent, ie, binary-coercible case). This is an oversight in the
8.3 implementation of ArrayCoerceExpr, and its result is that certain cases
involving IN or NOT IN with constants don't get optimized as they should be.
Per experimentation with an example from Ow Mun Heng.
into nodes/nodeFuncs, so as to reduce wanton cross-subsystem #includes inside
the backend. There's probably more that should be done along this line,
but this is a start anyway.
checks in ExecIndexBuildScanKeys() that were inadequate anyway: it's better
to verify the correct varno on an expected index key, not just reject OUTER
and INNER.
This makes the entire current contents of nodeFuncs.c dead code. I'll be
replacing it with some other stuff later, as per recent proposal.
at once and ItemPointers are collected in memory.
Remove tuple's killing by killtuple() if tuple was moved to another
page - it could produce unaceptable overhead.
Backpatch up to 8.1 because the bug was introduced by GiST's concurrency support.
1. -i option should run vacuum analyze only on pgbench tables, not *all*
tables in database.
2. pre-run cleanup step was DELETE FROM HISTORY then VACUUM HISTORY.
This is just a slow version of TRUNCATE HISTORY.
Simon Riggs
subqueries into the same thing you'd have gotten from IN (except always with
unknownEqFalse = true, so as to get the proper semantics for an EXISTS).
I believe this fixes the last case within CVS HEAD in which an EXISTS could
give worse performance than an equivalent IN subquery.
The tricky part of this is that if the upper query probes the EXISTS for only
a few rows, the hashing implementation can actually be worse than the default,
and therefore we need to make a cost-based decision about which way to use.
But at the time when the planner generates plans for subqueries, it doesn't
really know how many times the subquery will be executed. The least invasive
solution seems to be to generate both plans and postpone the choice until
execution. Therefore, in a query that has been optimized this way, EXPLAIN
will show two subplans for the EXISTS, of which only one will actually get
executed.
There is a lot more that could be done based on this infrastructure: in
particular it's interesting to consider switching to the hash plan if we start
out using the non-hashed plan but find a lot more upper rows going by than we
expected. I have therefore left some minor inefficiencies in place, such as
initializing both subplans even though we will currently only use one.
to be used for SubLinks that are underneath a top-level OR clause. Just as at
the very top level of WHERE, it's not necessary to be accurate about whether
the sublink returns FALSE or NULL, because either result has the same impact
on whether the WHERE will succeed.
Per Microsoft knowledge base article Q201213, early versions of
Windows fail when we do this. Later versions of Windows appear
to have a higher limit than 64Kb, but do still fail on large
sends, so we unconditionally limit it for all versions.
Patch from Tom Lane.
debug_print_plan to appear at LOG message level, not DEBUG1 as historically.
Make debug_pretty_print default to on. Also, cause plans generated via
EXPLAIN to be subject to debug_print_plan. This is all to make
debug_print_plan a reasonably comfortable substitute for the former behavior
of EXPLAIN VERBOSE.
eval_const_expressions will generally throw away anything that's ANDed with
constant FALSE, what we're left with given an example like
select * from tenk1 a where (unique1,0) in (select unique2,1 from tenk1 b);
is a cartesian product computation, which is really not acceptable.
This is a regression in CVS HEAD compared to previous releases, which were
able to notice the impossible join condition in this case --- though not in
some related cases that are also improved by this patch, such as
select * from tenk1 a left join tenk1 b on (a.unique1=b.unique2 and 0=1);
Fix by skipping evaluation of the appropriate side of the outer join in
cases where it's demonstrably unnecessary.
that we're considering pulling up. I hadn't wanted to think through whether
that could work during the first pass at this stuff. However, on closer
inspection it seems to be safe enough.
level of a JOIN/ON clause, not only at top level of WHERE. (However, we
can't do this in an outer join's ON clause, unless the ANY/EXISTS refers
only to the nullable side of the outer join, so that it can effectively
be pushed down into the nullable side.) Per request from Kevin Grittner.
In passing, fix a bug in the initial implementation of EXISTS pullup:
it would Assert if the EXIST's WHERE clause used a join alias variable.
Since we haven't yet flattened join aliases when this transformation
happens, it's necessary to include join relids in the computed set of
RHS relids.
returns NULL instead of a PGresult. The former coding would fail, which
is OK, but it neglected to give you the PQerrorMessage that might tell
you why. In the oldest branches, there was another problem: it'd sometimes
report PQerrorMessage from the wrong connection.
and anti joins. To do this, pass the SpecialJoinInfo struct for the current
join as an additional optional argument to operator join selectivity
estimation functions. This allows the estimator to tell not only what kind
of join is being formed, but which variable is on which side of the join;
a requirement long recognized but not dealt with till now. This also leaves
the door open for future improvements in the estimators, such as accounting
for the null-insertion effects of lower outer joins. I didn't do anything
about that in the current patch but the information is in principle deducible
from what's passed.
The patch also clarifies the definition of join selectivity for semi/anti
joins: it's the fraction of the left input that has (at least one) match
in the right input. This allows getting rid of some very fuzzy thinking
that I had committed in the original 7.4-era IN-optimization patch.
There's probably room to estimate this better than the present patch does,
but at least we know what to estimate.
Since I had to touch CREATE OPERATOR anyway to allow a variant signature
for join estimator functions, I took the opportunity to add a couple of
additional checks that were missing, per my recent message to -hackers:
* Check that estimator functions return float8;
* Require execute permission at the time of CREATE OPERATOR on the
operator's function as well as the estimator functions;
* Require ownership of any pre-existing operator that's modified by
the command.
I also moved the lookup of the functions out of OperatorCreate() and
into operatorcmds.c, since that seemed more consistent with most of
the other catalog object creation processes, eg CREATE TYPE.
match in antijoin mode, we should advance to next outer tuple not next inner.
We know we don't want to return this outer tuple, and there is no point in
advancing over matching inner tuples now, because we'd just have to do it
again if the next outer tuple has the same merge key. This makes a noticeable
difference if there are lots of duplicate keys in both inputs.
Similarly, after finding a match in semijoin mode, arrange to advance to
the next outer tuple after returning the current match; or immediately,
if it fails the extra quals. The rationale is the same. (This is a
performance bug in existing releases; perhaps worth back-patching? The
planner tries to avoid using mergejoin with lots of duplicates, so it may
not be a big issue in practice.)
Nestloop and hash got this right to start with, but I made some cosmetic
adjustments there to make the corresponding bits of logic look more similar.
variable stats_temp_directory, instead of requiring the admin to
mount/symlink the pg_stat_tmp directory manually.
For now the config variable is PGC_POSTMASTER. Room for further improvment
that would allow it to be changed on-the-fly.
parent, not only those with RangeTblRefs. We need them in ExecCheckRTPerms.
Report by Brendan O'Shea. Back-patch to 8.2, where pull_up_simple_union_all
was introduced.
the old JOIN_IN code, but antijoins are new functionality.) Teach the planner
to convert appropriate EXISTS and NOT EXISTS subqueries into semi and anti
joins respectively. Also, LEFT JOINs with suitable upper-level IS NULL
filters are recognized as being anti joins. Unify the InClauseInfo and
OuterJoinInfo infrastructure into "SpecialJoinInfo". With that change,
it becomes possible to associate a SpecialJoinInfo with every join attempt,
which permits some cleanup of join selectivity estimation. That needs to be
taken much further than this patch does, but the next step is to change the
API for oprjoin selectivity functions, which seems like material for a
separate patch. So for the moment the output size estimates for semi and
especially anti joins are quite bogus.
main tables.
This requires vacuum() to accept processing a toast table standalone, so
there's a user-visible change in that it's now possible (for a superuser) to
execute "VACUUM pg_toast.pg_toast_XXX".
of multiple forks, and each fork can be created and grown separately.
The bulk of this patch is about changing the smgr API to include an extra
ForkNumber argument in every smgr function. Also, smgrscheduleunlink and
smgrdounlink no longer implicitly call smgrclose, because other forks might
still exist after unlinking one. The callers of those functions have been
modified to call smgrclose instead.
This patch in itself doesn't have any user-visible effect, but provides the
infrastructure needed for upcoming patches. The additional forks envisioned
are a rewritten FSM implementation that doesn't rely on a fixed-size shared
memory block, and a visibility map to allow skipping portions of a table in
VACUUM that have no dead tuples.
REINDEX DATABASE including same) is done before a session has done any other
update on pg_class, the pg_class relcache entry was left with an incorrect
setting of rd_indexattr, because the indexed-attributes set would be first
demanded at a time when we'd forced a partial list of indexes into the
pg_class entry, and it would remain cached after that. This could result
in incorrect decisions about HOT-update safety later in the same session.
In practice, since only pg_class_relname_nsp_index would be missed out,
only ALTER TABLE RENAME and ALTER TABLE SET SCHEMA could trigger a problem.
Per report and test case from Ondrej Jirman.
INSERT or UPDATE will match the target table's current rowtype. In pre-8.3
releases inconsistency can arise with stale cached plans, as reported by
Merlin Moncure. (We patched the equivalent hazard on the SELECT side in Feb
2007; I'm not sure why we thought there was no risk on the insertion side.)
In 8.3 and HEAD this problem should be impossible due to plan cache
invalidation management, but it seems prudent to make the check anyway.
Back-patch as far as 8.0. 7.x versions lack ALTER COLUMN TYPE, so there
seems no way to abuse a stale plan comparably.
hashtable entries for tuples that are found only in the second input: they
can never contribute to the output. Furthermore, this implies that the
planner should endeavor to put first the smaller (in number of groups) input
relation for an INTERSECT. Implement that, and upgrade prepunion's estimation
of the number of rows returned by setops so that there's some amount of sanity
in the estimate of which one is smaller.
This completes my project of improving usage of hashing for duplicate
elimination (aggregate functions with DISTINCT remain undone, but that's
for some other day).
As with the previous patches, this means we can INTERSECT/EXCEPT on datatypes
that can hash but not sort, and it means that INTERSECT/EXCEPT without ORDER
BY are no longer certain to produce sorted output.
but seem like a separate patch since most of the remaining work is on the
executor side.) I took the opportunity to push selection of the grouping
operators for set operations into the parser where it belongs. Otherwise this
is just a small exercise in making prepunion.c consider both alternatives.
As with the recent DISTINCT patch, this means we can UNION on datatypes that
can hash but not sort, and it means that UNION without ORDER BY is no longer
certain to produce sorted output.
would work, but in fact it didn't return the same rows when moving backwards
as when moving forwards. This would have no visible effect in a DISTINCT
query (at least assuming the column datatypes use a strong definition of
equality), but it gave entirely wrong answers for DISTINCT ON queries.
sure that DISTINCT ON does what it's supposed to, ie, sort by the full ORDER
BY list before unique-ifying. The error seems masked in simple cases by the
fact that query_planner won't return query pathkeys that only partially match
the requested sort order, but I wouldn't want to bet that it couldn't be
exposed in some way or other.
Tom Lane
Peter Eisentraut
Magnus Hagander
Alvaro Herrera
Teodor Sigaev
Neil Conway
Michael Meskes
Heikki Linnakangas
Bruce Momjian
Andrew Dunstan