treat Var and non-Var IN-list items differently. Only non-Var items are
candidates to go into an ANY(ARRAY) construct --- we put all Vars as separate
OR conditions on the grounds that that leaves more scope for optimization.
Per suggestion from Robert Haas.
into an OR of equality comparisons, rather than x = ANY(ARRAY[...]), when there
are Vars in the right-hand side. This avoids a performance regression compared
to pre-8.2 releases, in cases where the OR form can be optimized into scans
of multiple indexes. Limit the possible downside by preferring this form only
when the list isn't very long (I set the cutoff at 32 elements, which is a
bit arbitrary but in the right ballpark). Per discussion with Jim Nasby.
In passing, also make it try the OR form if it cannot select a common type
for the array elements; we've seen a complaint or two about how the OR form
worked for such cases and ARRAY doesn't.
recent proposal. In typical cases, we now need 12 bytes per insert or delete
event and 16 bytes per update event; previously we needed 40 bytes per
event on 32-bit hardware and 80 bytes per event on 64-bit hardware. Even
in the worst case usage pattern with a large number of distinct triggers being
fired in one query, usage is at most 32 bytes per event. It seems to be a
bit faster than the old code as well, due to reduction of palloc overhead.
This commit doesn't address the TODO item of allowing the event list to spill
to disk; rather it's trying to stave off the need for that. However, it
probably makes that task a bit easier by reducing the data structure's
dependency on pointers. It would now be practical to dump an event list to
disk by "chunks" instead of individual events.
of copy/paste:d emails. Much of the contents had already been migrated
into the main documentation, some was out of date and some just plain
wrong.
Keep the "protocol-flowchart" which can still be useful.
in their targetlists had better reset ps_TupFromTlist during ReScan calls.
There's no need to back-patch here since nodeAgg and nodeGroup didn't
even pretend to support SRFs in prior releases.
* make LDAP use this instead of the hacky previous method to specify
the DN to bind as
* make all auth options behave the same when they are not compiled
into the server
* rename "ident maps" to "user name maps", and support them for all
auth methods that provide an external username
This makes a backwards incompatible change in the format of pg_hba.conf
for the ident, PAM and LDAP authentication methods.
inputs is unique or nearly so), make eqjoinsel() clamp the ndistinct estimates
to be not more than the estimated number of rows coming from the input
relations. This allows the estimate to change in response to the selectivity
of restriction conditions on the inputs.
This is a pretty narrow patch and maybe we should be more aggressive about
similarly clamping ndistinct in other cases; but I'm worried about
double-counting the effects of the restriction conditions. However, it seems
to help for the case exhibited by Grzegorz Jaskiewicz (antijoin against a
small subset of a relation), so let's try this for awhile.
until vars are distributed to rels during query_planner() startup. We don't
really need it before that, and not building it early has some advantages.
First, we don't need to put it through the various preprocessing steps, which
saves some cycles and eliminates the need for a number of routines to support
PlaceHolderInfo nodes at all. Second, this means one less unused plan for any
sub-SELECT appearing in a placeholder's expression, since we don't build
placeholder_list until after sublink expansion is complete.
correctly set. As result, killtuple() marks as dead
wrong tuple on page. Bug was introduced by me while fixing
possible duplicates during GiST index scan.
that represent some expression that we desire to compute below the top level
of the plan, and then let that value "bubble up" as though it were a plain
Var (ie, a column value).
The immediate application is to allow sub-selects to be flattened even when
they are below an outer join and have non-nullable output expressions.
Formerly we couldn't flatten because such an expression wouldn't properly
go to NULL when evaluated above the outer join. Now, we wrap it in a
PlaceHolderVar and arrange for the actual evaluation to occur below the outer
join. When the resulting Var bubbles up through the join, it will be set to
NULL if necessary, yielding the correct results. This fixes a planner
limitation that's existed since 7.1.
In future we might want to use this mechanism to re-introduce some form of
Hellerstein's "expensive functions" optimization, ie place the evaluation of
an expensive function at the most suitable point in the plan tree.
This patch eliminates the marking of subtransactions as SUBCOMMITTED in pg_clog
during their commit; instead they remain in-progress until main transaction
commit. At main transaction commit, the commit protocol is atomic-by-page
instead of one transaction at a time. To avoid a race condition with some
subtransactions appearing committed before others in the case where they span
more than one pg_clog page, we conserve the logic that marks them subcommitted
before marking the parent committed.
Simon Riggs with minor help from me
scanning; GiST and GIN do not, and it seems like too much trouble to make
them do so. By teaching ExecSupportsBackwardScan() about this restriction,
we ensure that the planner will protect a scroll cursor from the problem
by adding a Materialize node.
In passing, fix another longstanding bug in the same area: backwards scan of
a plan with set-returning functions in the targetlist did not work either,
since the TupFromTlist expansion code pays no attention to direction (and
has no way to run a SRF backwards anyway). Again the fix is to make
ExecSupportsBackwardScan check this restriction.
Also adjust the index AM API specification to note that mark/restore support
is unnecessary if the AM can't produce ordered output.
set_rel_width(). The code had been catering for the possibility of different
varnos in the relation targetlist, but this is impossible for a base relation
(and if it were possible, putting all the widths in the same RelOptInfo would
be wrong anyway).
is NULL but SK_SEARCHNULL is not set. Add checking IS NULL of keys
to set during key initialization. If key is NULL and SK_SEARCHNULL is not
set then nothnig can be satisfied.
With assert-enabled compilation that causes coredump.
Bug was introduced in 8.3 by support of IS NULL index scan.
In the previous coding, the list of columns that needed to be hashed on
was allocated in the per-query context, but we reallocated every time
the Agg node was rescanned. Since this information doesn't change over
a rescan, just construct the list of columns once during ExecInitAgg().
according to the TupleDesc's natts, not the number of physical columns in the
tuple. The previous coding would do the wrong thing in cases where natts is
different from the tuple's column count: either incorrectly report error when
it should just treat the column as null, or actually crash due to indexing off
the end of the TupleDesc's attribute array. (The second case is probably not
possible in modern PG versions, due to more careful handling of inheritance
cases than we once had. But it's still a clear lack of robustness here.)
The incorrect error indication is ignored by all callers within the core PG
distribution, so this bug has no symptoms visible within the core code, but
it might well be an issue for add-on packages. So patch all the way back.
lengthof(SysAtt) not FirstLowInvalidHeapAttributeNumber, for consistency with
the other uses of the SysAtt array, and to make it clearer that it doesn't
walk off the end of that array.
Formerly, the lack of any opclasses that could accept such data was enough
of a defense, but now with a "record" opclass we need to check more carefully.
(You can still use that opclass for an index, but you have to store a named
composite type not an anonymous one.)
the timestamp types. Turns out this doesn't even reduce the available
range of dates, since the restriction to dates that work for Julian-date
arithmetic is much tighter than the int32 range anyway. Per a longstanding
TODO item.
depth-first search order. Upon close reading of SQL:2008, it seems that the
spec's SEARCH DEPTH FIRST and SEARCH BREADTH FIRST options do not actually
guarantee any particular result order: what they do is provide a constructed
column that the user can then sort on in the outer query. So this is actually
just as much functionality ...
pseudo-type record[] to represent arrays of possibly-anonymous composite
types. Since composite datums carry their own type identification, no
extra knowledge is needed at the array level.
The main reason for doing this right now is that it is necessary to support
the general case of detection of cycles in recursive queries: if you need to
compare more than one column to detect a cycle, you need to compare a ROW()
to an array built from ROW()s, at least if you want to do it as the spec
suggests. Add some documentation and regression tests concerning the cycle
detection issue.
RecursiveUnion to which it refers. It turns out that we can just postpone the
relevant initialization steps until the first exec call for the node, by which
time the ancestor node must surely be initialized. Per report from Greg Stark.
the isTrigger state explicitly, not rely on nonzero-ness of trigrelOid
to indicate trigger-hood, because trigrelOid will be left zero when compiling
for validation. The (useless) function hash entry built by the validator
was able to match an ordinary non-trigger call later in the same session,
thereby bypassing the check that is supposed to prevent such a call.
Per report from Alvaro.
It might be worth suppressing the useless hash entry altogether, but
that's a bigger change than I want to consider back-patching.
Back-patch to 8.0. 7.4 doesn't have the problem because it doesn't
have validation mode.
to process any pending unlinks for the source database.
Before, if you dropped a relation in the template database just before
CREATE DATABASE, and a checkpoint happened during copydir(), the checkpoint
might delete a file that we're just about to copy, causing lstat() in
copydir() to fail with ENOENT.
Backpatch to 8.3, where the pending unlinks were introduced.
Per report by Matthew Wakeling and analysis by Tom Lane.
of referencing a WITH item that's not yet in scope according to the SQL
spec's semantics. This seems to be an easy error to make, and the bare
"relation doesn't exist" message doesn't lead one's mind in the correct
direction to fix it.
implementation uses an in-memory hash table, so it will poop out for very
large recursive results ... but the performance characteristics of a
sort-based implementation would be pretty unpleasant too.
use the old relfilenode in the new tablespace. There might be another relation
in the new tablespace with the same relfilenode, so we must generate a fresh
relfilenode in the new tablespace.
The 8.3 patch to let deleted relation files linger as zero-length files until
the next checkpoint made this more obvious: moving a relation from one table
space another, and then back again, caused a collision with the lingering
file.
Back-patch to 8.1. The issue is present in 8.0 as well, but it doesn't seem
worth fixing there, because we didn't have protection from OID collisions
after OID wraparound before 8.1.
Report by Guillaume Lelarge.
supplies an expression that can't be coerced to the target column type.
The code previously attempted to point at the target column name, which
doesn't work at all in an INSERT with omitted column name list, and is
also not remarkably helpful when the problem is buried somewhere in a
long INSERT-multi-VALUES command. Make it point at the failed expression
instead.
get_name_for_var_field didn't have enough context to interpret a reference to
a CTE query's output. Fixing this requires separate hacks for the regular
deparse case (pg_get_ruledef) and for the EXPLAIN case, since the available
context information is quite different. It's pretty nearly parallel to the
existing code for SUBQUERY RTEs, though. Also, add code to make sure we
qualify a relation name that matches a CTE name; else the CTE will mistakenly
capture the reference when reloading the rule.
In passing, fix a pre-existing problem with get_name_for_var_field not working
on variables in targetlists of SubqueryScan plan nodes. Although latent all
along, this wasn't a problem until we made EXPLAIN VERBOSE try to print
targetlists. To do this, refactor the deparse_context_for_plan API so that
the special case for SubqueryScan is all on ruleutils.c's side.
the column alias names of the RTE referenced by the Var to the RowExpr.
This is needed to allow ruleutils.c to correctly deparse FieldSelect nodes
referencing such a construct. Per my recent bug report.
Adding a field to RowExpr forces initdb (because of stored rules changes)
so this solution is not back-patchable; which is unfortunate because 8.2
and 8.3 have this issue. But it only affects EXPLAIN for some pretty odd
corner cases, so we can probably live without a solution for the back
branches.
relation forks. While the file names are not visible to users, for those
that do peek into the data directory, it's nice to have more descriptive
names. Per Greg Stark's suggestion.
well as regular tables. Per discussion, this seems necessary to meet the
principle of least astonishment.
In passing, simplify the error messages in warnAutoRange(). Now that we
have parser error position info for these errors, it doesn't seem very
useful to word the error message differently depending on whether we are
inside a sub-select or not.
machine produces zero (rather than the more usual minimum-possible-integer)
for the only possible overflow case. This has been seen to occur for at least
some word widths on some hardware, and it's cheap enough to check for
everywhere. Per Peter's analysis of buildfarm reports.
This could be back-patched, but in the absence of any gripes from the field
I doubt it's worth the trouble.
recursive CTE that we're still in progress of analyzing. Add a similar guard
to the similar code in expandRecordVariable(), and tweak regression tests to
cover this case. Per report from Dickson S. Guedes.
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
name of a fork ('main' or 'fsm', at the moment) to pg_relation_size() to
get the size of a specific fork. Defaults to 'main', if none given.
While we're at it, modify pg_relation_size to take a regclass as argument,
instead of separate variants taking oid and name. This change is
transparent to typical use where the table name is passed as a string
literal, like pg_relation_size('table'), but will break queries like
pg_relation_size(namecol), where namecol is of type name. text-type input
still works, and using a non-schema-qualified table name is not very
reliable anyway, so this is unlikely to break anyone's queries in practice.
This facility replaces the former mark/restore support but is otherwise
upward-compatible with previous uses. It's expected to be needed for
single evaluation of CTEs and also for window functions, so I'm committing
it separately instead of waiting for either one of those patches to be
finished. Per discussion with Greg Stark and Hitoshi Harada.
Note: I removed nodeFunctionscan's mark/restore support, instead of bothering
to update it for this change, because it was dead code anyway.
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
applied to expression indexes, not to plain relations. The original coding
in btcostestimate conflated the two cases, but it's not hard to use
get_relation_stats_hook instead when we're looking to the underlying relation.
(ie, has nothing to quote), rather than silently ignoring the character as has
been our historical behavior. This is required by SQL spec and should help
reduce the sort of user confusion seen in bug #4436. Per discussion.
This is not so much a bug fix as a definitional change, and it could break
existing applications; so not back-patched. It might deserve being mentioned
as an incompatibility in the 8.4 release notes.
element types. Since the backend doesn't actually pay attention to the array
type's delimiter, this has no functional effect, but it seems better for the
catalog entries to be consistent. Per gripe from Greg Mullane and subsequent
discussion.
a SubLink expression into a rule query. We missed cases where the original
query contained a sub-SELECT in a function in FROM, a multi-row VALUES list,
or a RETURNING list. Per bug #4434 from Dean Rasheed and subsequent
investigation.
Back-patch to 8.1; older releases don't have the issue because they didn't
try to be smart about setting hasSubLinks only when needed.
ctype are now more like encoding, stored in new datcollate and datctype
columns in pg_database.
This is a stripped-down version of Radek Strnad's patch, with further
changes by me.
that presence of the password in the conninfo string must be checked *before*
risking a connection attempt, there is no point in checking it afterwards.
This makes the specification of PQconnectionUsedPassword() a bit simpler
and perhaps more generally useful, too.
conninfo string *before* trying to connect to the remote server, not after.
As pointed out by Marko Kreen, in certain not-very-plausible situations
this could result in sending a password from the postgres user's .pgpass file,
or other places that non-superusers shouldn't have access to, to an
untrustworthy remote server. The cleanest fix seems to be to expose libpq's
conninfo-string-parsing code so that dblink can check for a password option
without duplicating the parsing logic.
Joe Conway, with a little cleanup by Tom Lane
instead of listing all the columns returned by the underlying function.
initdb not forced since this patch doesn't actually change anything about
the stored form of the views. It just means there's one less place to change
if someone wants to add columns to them.
sequence of operations that libpq goes through while creating a PGresult.
Also, remove ill-considered "const" decoration on parameters passed to
event procedures.
guarantees about whether event procedures will receive DESTROY events.
They no longer need to defend themselves against getting a DESTROY
without a successful prior CREATE.
Andrew Chernow
bison output. Without these, make can sometimes be tempted to invoke its
built-in rules using lex and yacc, which can fail if those commands are not
available.
This was a main cause for the NLS web site breakage.
there are FD_XACT_TEMPORARY files to clean up at transaction end.
Per performance profiling results on AWeber's huge systems.
Patch by me after an idea suggested by Simon Riggs.
interpreted as expected (the sign should affect months too), and get rid of
hard-wired assumption that unmarked signed values must be hours (if integers)
or seconds (if floats). The former was just a bug in my previous patch,
while the latter may have made sense at one time but seems illogical now
that we support determination of the units from typmod information.
Ron Mayer and myself.
forestalls potential overflow when the same table (or other object, but
usually tables) is accessed by very many successive queries within a single
transaction. Per report from Michael Milligan.
Back-patch to 8.0, which is as far back as the patch conveniently applies.
There have been no reports of overflow in pre-8.3 releases, but clearly the
risk existed all along. (Michael's report suggests that 8.3 may consume lock
counts faster than prior releases, but with no test case to look at it's hard
to be sure about that. Widening the counts seems a good future-proofing
measure in any event.)
we regenerate the SQL query text not merely the plan derived from it. This
is needed to handle contingencies such as renaming of a table or column
used in an FK. Pre-8.3, such cases worked despite the lack of replanning
(because the cached plan needn't actually change), so this is a regression.
Per bug #4417 from Benjamin Bihler.
value. This means that hash index lookups are always lossy and have to be
rechecked when the heap is visited; however, the gain in index compactness
outweighs this when the indexed values are wide. Also, we only need to
perform datatype comparisons when the hash codes match exactly, rather than
for every entry in the hash bucket; so it could also win for datatypes that
have expensive comparison functions. A small additional win is gained by
keeping hash index pages sorted by hash code and using binary search to reduce
the number of index tuples we have to look at.
Xiao Meng
This commit also incorporates Zdenek Kotala's patch to isolate hash metapages
and hash bitmaps a bit better from the page header datastructures.
