Previously the timer was enabled whenever there were any pending stats after
executing a statement, just to then be disabled again when not idle
anymore. That lead to an increase in GetCurrentTimestamp() calls from within
timeout.c compared to 14.
To avoid that increase, leave the timer enabled until stats are reported,
rather than until idle. The timer is only disabled once the pending stats have
been reported.
For me this fixes the increase in GetCurrentTimestamp() calls, there now are
fewer calls in 15 than in 14, in the previously slowed down workload.
While at it, also update assertion in pgstat_report_stat() to be more precise.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Backpatch: 15-
The new expression step types increased the size of ExprEvalStep by ~4 for all
types of expression steps, slowing down expression evaluation noticeably. Move
them out of line.
There's other issues with these expression steps, but addressing them is
largely independent of this aspect.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Backpatch: 15-
This reverts most of 91c0570a79, f28bf667f6, fe0972ee5e, afdeff1052. The
only thing left is the retry loop in 019_replslot_limit.pl that avoids
spurious failures by retrying a couple times.
We haven't seen any hard evidence that this is caused by anything but slow
process shutdown. We did not find any cases where walsenders did not vanish
after waiting for longer. Therefore there's no reason for this debugging code
to remain.
Discussion: https://postgr.es/m/20220530190155.47wr3x2prdwyciah@alap3.anarazel.de
Backpatch: 15-
When we changed some built-in functions to use anycompatiblearray
instead of anyarray, we created a dump/restore hazard for user-defined
operators and aggregates relying on those functions: the user objects
have to be modified to change their signatures similarly. This causes
pg_upgrade to fail partway through if the source installation contains
such objects. We generally try to have pg_upgrade detect such hazards
and fail before it does anything exciting, so add logic to detect
this case too.
Back-patch to v14 where the change was made.
Justin Pryzby, reviewed by Andrey Borodin
Discussion: https://postgr.es/m/3383880.QJadu78ljV@vejsadalnx
Noted while comparing existing code to the output of the proposed
patch to automate creation of these functions. Some of the changes
are just cosmetic, but others represent real bugs. I've not
attempted to analyze the user-visible impact.
Back-patch to v15 where this code came in.
Discussion: https://postgr.es/m/1794155.1656984188@sss.pgh.pa.us
We were going into IDLE state too soon when executing queries via
PQsendQuery in pipeline mode, causing several scenarios to misbehave in
different ways -- most notably, as reported by Daniele Varrazzo, that a
warning message is produced by libpq:
message type 0x33 arrived from server while idle
But it is also possible, if queries are sent and results consumed not in
lockstep, for the expected mediating NULL result values from PQgetResult
to be lost (a problem which has not been reported, but which is more
serious).
Fix this by introducing two new concepts: one is a command queue element
PGQUERY_CLOSE to tell libpq to wait for the CloseComplete server
response to the Close message that is sent by PQsendQuery. Because the
application is not expecting any PGresult from this, the mechanism to
consume it is a bit hackish.
The other concept, authored by Horiguchi-san, is a PGASYNC_PIPELINE_IDLE
state for libpq's state machine to differentiate "really idle" from
merely "the idle state that occurs in between reading results from the
server for elements in the pipeline". This makes libpq not go fully
IDLE when the libpq command queue contains entries; in normal cases, we
only go IDLE once at the end of the pipeline, when the server response
to the final SYNC message is received. (However, there are corner cases
it doesn't fix, such as terminating the query sequence by
PQsendFlushRequest instead of PQpipelineSync; this sort of scenario is
what requires PGQUERY_CLOSE bit above.)
This last bit helps make the libpq state machine clearer; in particular
we can get rid of an ugly hack in pqParseInput3 to avoid considering
IDLE as such when the command queue contains entries.
A new test mode is added to libpq_pipeline.c to tickle some related
problematic cases.
Reported-by: Daniele Varrazzo <daniele.varrazzo@gmail.com>
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CA+mi_8bvD0_CW3sumgwPvWdNzXY32itoG_16tDYRu_1S2gV2iw@mail.gmail.com
Amendment to 84ad713cf8: Not all
prepared statements have a result descriptor. As currently coded,
this would crash when reading pg_prepared_statements. Make those
cases return null for result_types instead. Also add a test case for
it.
As noted by Thomas Munro, CLDR 36 has added SOUND RECORDING COPYRIGHT
(U+2117), and we use CLDR 41, so this can be removed from the set of
special cases.
The set of regression tests is expanded for degree signs, which are two
of the special cases, and a fancy case with U+210C in Latin-ASCII.xml
that we have discovered about when diving into what could be done for
Cyrillic characters (this last part is material for a future patch, not
tackled yet).
While on it, some of the assertions of generate_unaccent_rules.py are
expanded to report the codepoint on which a failure is found, something
useful for debugging.
Extracted from a larger patch by the same author.
Author: Przemysław Sztoch
Discussion: https://postgr.es/m/8478da0d-3b61-d24f-80b4-ce2f5e971c60@sztoch.pl
A previous commit replaced all the calls to this function with
durable_rename() as of dac1ff3, making it used nowhere in the tree.
Using it in extension code is also risky based on the issues described
in this previous commit, so let's remove it. This makes possible the
removal of HAVE_WORKING_LINK.
Author: Nathan Bossart
Reviewed-by: Robert Haas, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20220407182954.GA1231544@nathanxps13
durable_rename_excl() attempts to avoid overwriting any existing files
by using link() and unlink(), and it falls back to rename() on some
platforms (aka WIN32), which offers no such overwrite protection. Most
callers use durable_rename_excl() just in case there is an existing
file, but in practice there shouldn't be one (see below for more
details).
Furthermore, failures during durable_rename_excl() can result in
multiple hard links to the same file. As per Nathan's tests, it is
possible to end up with two links to the same file in pg_wal after a
crash just before unlink() during WAL recycling. Specifically, the test
produced links to the same file for the current WAL file and the next
one because the half-recycled WAL file was re-recycled upon restarting,
leading to WAL corruption.
This change replaces all the calls of durable_rename_excl() to
durable_rename(). This removes the protection against accidentally
overwriting an existing file, but some platforms are already living
without it and ordinarily there shouldn't be one. The function itself
is left around in case any extensions are using it. It will be removed
on HEAD via a follow-up commit.
Here is a summary of the existing callers of durable_rename_excl() (see
second discussion link at the bottom), replaced by this commit. First,
basic_archive used it to avoid overwriting an archive concurrently
created by another server, but as mentioned above, it will still
overwrite files on some platforms. Second, xlog.c uses it to recycle
past WAL segments, where an overwrite should not happen (origin of the
change at f0e37a8) because there are protections about the WAL segment
to select when recycling an entry. The third and last area is related
to the write of timeline history files. writeTimeLineHistory() will
write a new timeline history file at the end of recovery on promotion,
so there should be no such files for the same timeline.
What remains is writeTimeLineHistoryFile(), that can be used in parallel
by a WAL receiver and the startup process, and some digging of the
buildfarm shows that EEXIST from a WAL receiver can happen with an error
of "could not link file \"pg_wal/xlogtemp.NN\" to \"pg_wal/MM.history\",
which would cause an automatic restart of the WAL receiver as it is
promoted to FATAL, hence this should improve the stability of the WAL
receiver as rename() would overwrite an existing TLI history file
already fetched by the startup process at recovery.
This is a bug fix, but knowing the unlikeliness of the problem involving
one or more crashes at an exceptionally bad moment, no backpatch is
done. Also, I want to be careful with such changes (aaa3aed did the
opposite of this change by removing HAVE_WORKING_LINK so as Windows
would do a link() rather than a rename() but this was not
concurrent-safe). A backpatch could be revisited in the future. This
is the second time this change is attempted, ccfbd92 being the first
one, but this time no assertions are added for the case of a TLI history
file written concurrently by the WAL receiver or the startup process
because we can expect one to exist (some of the TAP tests are able to
trigger with a proper timing).
Author: Nathan Bossart
Reviewed-by: Robert Haas, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20220407182954.GA1231544@nathanxps13
Discussion: https://postgr.es/m/Ym6GZbqQdlalSKSG@paquier.xyz
Use it for RelationSyncEntry->streamed_txns, which is currently using an
integer list.
The API support is not complete, not because it is hard to write but
because it's unclear that it's worth the code space, there being so
little use of XID lists.
Discussion: https://postgr.es/m/202205130830.g5ntonhztspb@alvherre.pgsql
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Attempting such an operation would already fail, but in various and
confusing ways. For example, while in recovery, some elog() messages
would be reported, but these should never be user-facing. This commit
restricts any write operations done on large objects in a read-only
context, so as the errors generated are more user-friendly. This is per
the discussion done with Tom Lane and Robert Haas.
Some regression tests are added to check the case of all the SQL
functions working on large objects (including an update of the test's
alternate output).
Author: Yugo Nagata
Discussion: https://postgr.es/m/20220527153028.61a4608f66abcd026fd3806f@sraoss.co.jp
Amendment to ec40f34224: We also need to
change the way the datum is supplied to int8. Otherwise, the value is
still cut off as an int4, and it will crash on 32-bit platforms.
Several buildfarm members are failing the pg_upgrade test in
REL_15_STABLE, though the identical test is fine in HEAD.
On thorntail it's possible to see that the problem is an
overlength socket path name, and I bet the same is true
on the others.
The normally-started postmasters used in the test are already
set up with short socket directory paths, but we neglected to
tell pg_upgrade itself to do likewise when starting child
postmasters, and indeed it seems to be explicitly selecting
the test directory instead.
Back-patch to v15 where the current test script was introduced.
(The previous script might have the same issue, because I don't
see any use of -s/--socketdir in it either; but we've had no
complaints, so leave it alone for now.)
Discussion: https://postgr.es/m/1410025.1656890531@sss.pgh.pa.us
None of the other bison parsers contains this directive, and it gives
rise to some unfortunate and impenetrable messages, so just remove it.
Backpatch to release 12, where it was introduced.
Per gripe from Erik Rijkers
Discussion: https://postgr.es/m/ba069ce2-a98f-dc70-dc17-2ccf2a9bf7c7@xs4all.nl
Interpret its privileges argument as a comma-separated list of
privilege names, as in has_table_privilege and other functions.
This is actually net less code, since the support routine to
parse that already exists, and we can drop convert_priv_string()
which had no other use-case.
Robins Tharakan
Discussion: https://postgr.es/m/e5a05dc54ba64408b3dd260171c1abaf@EX13D05UWC001.ant.amazon.com
After commit 662dbe2c8, psql tab completion didn't conveniently
support the case of "ALTER EXTENSION foo UPDATE". It'd always
add "TO", which is fine if you want to specify a target version
but not if you don't ... and surely the latter is the much more
common case.
To fix, remove "TO" from the initially offered completion; you now
need to press TAB one additional time to get that. We won't try to
duplicate the old behavior of attempting initial completion on the
target version along with TO. It's too squirrelly to get the quoting
right, and this is such an infrequent usage that it doesn't seem worth
expending a lot of effort and special code on.
Noted by Noah Misch. Back-patch to v15.
Discussion: https://postgr.es/m/20220703083217.GB2476530@rfd.leadboat.com
Per buildfarm member prairiedog, this platform rejects uninitialized
global variables in shared libraries. Back-patch to v10, like the
addition of the variable.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20220703030619.GB2378460@rfd.leadboat.com
ecpglib has been calling it once per SQL query and once per EXEC SQL GET
DESCRIPTOR. Instead, if newlocale() has not succeeded before, call it
while establishing a connection. This mitigates three problems:
- If newlocale() failed in EXEC SQL GET DESCRIPTOR, the command silently
proceeded without the intended locale change.
- On AIX, each newlocale()+freelocale() cycle leaked memory.
- newlocale() CPU usage may have been nontrivial.
Fail the connection attempt if newlocale() fails. Rearrange
ecpg_do_prologue() to validate the connection before its uselocale().
The sort of program that may regress is one running in an environment
where newlocale() fails. If that program establishes connections
without running SQL statements, it will stop working in response to this
change. I'm betting against the importance of such an ECPG use case.
Most SQL execution (any using ECPGdo()) has long required newlocale()
success, so there's little a connection could do without newlocale().
Back-patch to v10 (all supported versions).
Reviewed by Tom Lane. Reported by Guillaume Lelarge.
Discussion: https://postgr.es/m/20220101074055.GA54621@rfd.leadboat.com
POSIX shm_open() can sleep for a long time and fail spuriously because
of contention on an internal lock file on Solaris (and presumably
illumos). Commit 389869af fixed the main problem with this, namely that
we could crash, but it's now clear that "posix" is not a good default.
Therefore, choose "sysv" at initdb time on Solaris and illumos. Other
choices are still available by editing the postgresql.conf file.
Back-patch only to 15, because contention is much less likely further
back, and it doesn't seem like a good idea to change this in released
branches. This should clear up the failures on build farm animal
margay.
Discussion: https://postgr.es/m/CA%2BhUKGKqKrCV5xKWfh9rnm%3Do%3DDwZLTLtnsj_XpUi9g5%3DV%2B9oyg%40mail.gmail.com
pg_attribute_nonnull(...) can be used to generate compiler warnings
when a function is called with the specified arguments set to NULL, as
per an idea from Andres Freund. An empty argument list indicates that
no pointer arguments can be NULL. pg_attribute_nonnull() only works for
compilers that support the nonnull function attribute. If nonnull is
not supported, pg_attribute_nonnull() has no effect.
As a beginning, this commit uses it for the DefineCustomXXXVariable()
functions to generate warnings when the "name" and "value" arguments are
set to NULL. This will likely be expanded to other places in the
future, where it makes sense.
Author: Nathan Bossart
Reviewed by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20220525061739.ur7x535vtzyzkmqo@alap3.anarazel.de
There were many calls to construct_array() and deconstruct_array() for
built-in types, for example, when dealing with system catalog columns.
These all hardcoded the type attributes necessary to pass to these
functions.
To simplify this a bit, add construct_array_builtin(),
deconstruct_array_builtin() as wrappers that centralize this hardcoded
knowledge. This simplifies many call sites and reduces the amount of
hardcoded stuff that is spread around.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/2914356f-9e5f-8c59-2995-5997fc48bcba%40enterprisedb.com
Previously, we trusted the OS not to report EEXIST unless we'd passed in
IPC_CREAT | IPC_EXCL or O_CREAT | O_EXCL, as appropriate. Solaris's
shm_open() can in fact do that, causing us to crash because we didn't
ereport and then we blithely assumed the mapping was successful.
Let's treat EEXIST just like any other error, unless we're actually
trying to create a new segment. This applies to shm_open(), where this
behavior has been seen, and also to the equivalent operations for our
sysv and mmap modes just on principle.
Based on the underlying reason for the error, namely contention on a
lock file managed by Solaris librt for each distinct name, this problem
is only likely to happen on 15 and later, because the new shared memory
stats system produces shm_open() calls for the same path from
potentially large numbers of backends concurrently during
authentication. Earlier releases only shared memory segments between a
small number of parallel workers under one Gather node. You could
probably hit it if you tried hard enough though, and we should have been
more defensive in the first place. Therefore, back-patch to all
supported releases.
Per build farm animal margay. This isn't the end of the story, though,
it just changes random crashes into random "File exists" errors; more
work needed for a green build farm.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGKqKrCV5xKWfh9rnm%3Do%3DDwZLTLtnsj_XpUi9g5%3DV%2B9oyg%40mail.gmail.com
pg_start_backup() and pg_stop_backup() have been respectively renamed to
pg_backup_start() and pg_backup_stop() as of 39969e2, but a few comments
did not get the call.
Reviewed-by: Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/YrqGlj1+4DF3dbZ/@paquier.xyz
Previously, the tests were structured so as all the queries whose plans
are checked run first, followed by pattern checks using the full set of
server logs. This can be problematic when extending the tests, as this
increases query plan overlaps, where two tests finish by having similar
plan outputs potentially invalidating the tests wanted.
The tests are refactored so as log content matches are checked in
isolation of each query run, by grabbing the position of the server logs
before running each query whose plan is generated in the logs. This
avoids issues when extending the tests, something that would become a
larger problem with a follow-up patch that adds a new GUC in
auto_explain to control the size of the each parameter logged.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87ee09mohb.fsf@wibble.ilmari.org
MemSet() with a value other than 0 just falls back to memset(), so the
indirection is unnecessary if the value is constant and not 0. Since
there is some interest in getting rid of MemSet(), this gets some easy
cases out of the way. (There are a few MemSet() calls that I didn't
change to maintain the consistency with their surrounding code.)
Discussion: https://www.postgresql.org/message-id/flat/CAEudQApCeq4JjW1BdnwU=m=-DvG5WyUik0Yfn3p6UNphiHjj+w@mail.gmail.com