This patch essentially is cleaning up technical debt left behind
by the original implementation of plpgsql procedures, particularly
commit d92bc83c4. That patch (or more precisely, follow-on patches
fixing its worst bugs) forced us to re-plan CALL and DO statements
each time through, if we're in a non-atomic context. That wasn't
for any fundamental reason, but just because use of a saved plan
requires having a ResourceOwner to hold a reference count for the
plan, and we had no suitable resowner at hand, nor would the
available APIs support using one if we did. While it's not that
expensive to create a "plan" for CALL/DO, the cycles do add up
in repeated executions.
This patch therefore makes the following API changes:
* GetCachedPlan/ReleaseCachedPlan are modified to let the caller
specify which resowner to use to pin the plan, rather than forcing
use of CurrentResourceOwner.
* spi.c gains a "SPI_execute_plan_extended" entry point that lets
callers say which resowner to use to pin the plan. This borrows the
idea of an options struct from the recently added SPI_prepare_extended,
hopefully allowing future options to be added without more API breaks.
This supersedes SPI_execute_plan_with_paramlist (which I've marked
deprecated) as well as SPI_execute_plan_with_receiver (which is new
in v14, so I just took it out altogether).
* I also took the opportunity to remove the crude hack of letting
plpgsql reach into SPI private data structures to mark SPI plans as
"no_snapshot". It's better to treat that as an option of
SPI_prepare_extended.
Now, when running a non-atomic procedure or DO block that contains
any CALL or DO commands, plpgsql creates a ResourceOwner that
will be used to pin the plans of the CALL/DO commands. (In an
atomic context, we just use CurrentResourceOwner, as before.)
Having done this, we can just save CALL/DO plans normally,
whether or not they are used across transaction boundaries.
This seems to be good for something like 2X speedup of a CALL
of a trivial procedure with a few simple argument expressions.
By restricting the creation of an extra ResourceOwner like this,
there's essentially zero penalty in cases that can't benefit.
Pavel Stehule, with some further hacking by me
Discussion: https://postgr.es/m/CAFj8pRCLPdDAETvR7Po7gC5y_ibkn_-bOzbeJb39WHms01194Q@mail.gmail.com
Up until now, we've held this lock when performing a checkpoint or
restartpoint, but commit 076a055acf back
in 2004 and commit 7e48b77b1c from 2009,
taken together, have removed all need for this. In the present code,
there's only ever one process entitled to attempt a checkpoint: either
the checkpointer, during normal operation, or the postmaster, during
single-user operation. So, we don't need the lock.
One possible concern in making this change is that it means that
a substantial amount of code where HOLD_INTERRUPTS() was previously
in effect due to the preceding LWLockAcquire() will now be
running without that. This could mean that ProcessInterrupts()
gets called in places from which it didn't before. However, this
seems unlikely to do very much, because the checkpointer doesn't
have any signal mapped to die(), so it's not clear how,
for example, ProcDiePending = true could happen in the first
place. Similarly with ClientConnectionLost and recovery conflicts.
Also, if there are any such problems, we might want to fix them
rather than reverting this, since running lots of code with
interrupt handling suspended is generally bad.
Patch by me, per an inquiry by Amul Sul. Review by Tom Lane
and Michael Paquier.
Discussion: http://postgr.es/m/CAAJ_b97XnBBfYeSREDJorFsyoD1sHgqnNuCi=02mNQBUMnA=FA@mail.gmail.com
Both heapgettup() and heapgettup_pagemode() incorrectly set the first page
to scan in a backward scan in which the number of pages to scan was
specified by heap_setscanlimits(). The code incorrectly started the scan
at the end of the relation when startBlk was 0, or otherwise at
startBlk - 1, neither of which is correct when only scanning a subset of
pages.
The fix here checks if heap_setscanlimits() has changed the number of
pages to scan and if so we set the first page to scan as the final page in
the specified range during backward scans.
Proper adjustment of this code was forgotten when heap_setscanlimits() was
added in 7516f5259 back in 9.5. However, practice, nowhere in core code
performs backward scans after having used heap_setscanlimits(), yet, it is
possible an extension uses the heap functions in this way, hence
backpatch.
An upcoming patch does use heap_setscanlimits() with backward scans, so
this must be fixed before that can go in.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvpGc9h0_oVD2CtgBcxCS1N-qDYZSeBRnUh+0CWJA9cMaA@mail.gmail.com
Backpatch-through: 9.5, all supported versions
Commit 69bd60672 fixed the initialization of streamed transactions for
RelationSyncEntry. It forgot to initialize the publication actions while
invalidating the RelationSyncEntry due to which even though the relation
is dropped from a particular publication we still publish its changes. Fix
it by initializing pubactions when entry got invalidated.
Author: Japin Li and Bharath Rupireddy
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALj2ACV+0UFpcZs5czYgBpujM9p0Hg1qdOZai_43OU7bqHU_xw@mail.gmail.com
This file has failed headerscheck/cpluspluscheck verification since
commit 0650ff230, as a result of referencing typedef TimestampTz
without including the appropriate header.
DST law changes in Russia (Volgograd zone) and South Sudan.
Historical corrections for Australia, Bahamas, Belize, Bermuda,
Ghana, Israel, Kenya, Nigeria, Palestine, Seychelles, and Vanuatu.
Notably, the Australia/Currie zone has been corrected to the point
where it is identical to Australia/Hobart.
This adds code omitted from commit 7db0cd2145 by accident, which had
two consequences. Firstly, only rows inserted by heap_multi_insert were
frozen as expected when running COPY FREEZE, while heap_insert left
rows unfrozen. That however includes rows in TOAST tables, so a lot of
data might have been left unfrozen. Secondly, page might have been left
partially empty after relcache invalidation.
This addresses both of those issues.
Discussion: https://postgr.es/m/CABOikdN-ptGv0mZntrK2Q8OtfUuAjqaYMGmkdU1dCKFtUxVLrg@mail.gmail.com
With this commit, SHA1 goes through the implementation provided by
OpenSSL via EVP when building the backend with it, and uses as fallback
implementation KAME which was located in pgcrypto and already shaped for
an integration with a set of init, update and final routines.
Structures and routines have been renamed to make things consistent with
the fallback implementations of MD5 and SHA2.
uuid-ossp has used for ages a shortcut with pgcrypto to fetch a copy of
SHA1 if needed. This was built depending on the build options within
./configure, so this cleans up some code and removes the build
dependency between pgcrypto and uuid-ossp.
Note that this will help with the refactoring of HMAC, as pgcrypto
offers the option to use MD5, SHA1 or SHA2, so only the second option
was missing to make that possible.
Author: Michael Paquier
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/X9HXKTgrvJvYO7Oh@paquier.xyz
opt_distinct_clause is only used in PLpgSQL_Expr, which ecpg
ignores, so it needs to ignore opt_distinct_clause too.
My oversight in 7cd9765f9; reported by Bruce Momjian.
Discussion: https://postgr.es/m/E1l33wr-0005sJ-9n@gemulon.postgresql.org
In light of recent discussions, we should instruct people to
install Apple's command line tools; installing Xcode is secondary.
Also, fix sample command for finding out the default sysroot,
as we now know that the command originally recommended can give
a result that doesn't match your OS version.
Also document the workaround to use if you really don't want
configure to select a sysroot at all.
Discussion: https://postgr.es/m/20210119111625.20435-1-james.hilliard1@gmail.com
libpq's error messages for connection failures pretty well stand on
their own, especially since commits 52a10224e/27a48e5a1. Prefixing
them with 'could not connect to database "foo"' or the like is just
redundant, and perhaps even misleading if the specific database name
isn't relevant to the failure. (When it is, we trust that the
backend's error message will include the DB name.) Indeed, psql
hasn't used any such prefix in a long time. So, make all our other
programs and documentation examples agree with psql's practice.
Discussion: https://postgr.es/m/1094524.1611266589@sss.pgh.pa.us
I'd omitted this from the grammar in commit c9d529848, figuring that
it wasn't worth supporting. However we already have one complaint,
so it seems that judgment was wrong. It doesn't require a huge
amount of code, so add it back. (I'm still drawing the line at
UNION/INTERSECT/EXCEPT though: those'd require an unreasonable
amount of grammar refactoring, and the single-result-row restriction
makes them near useless anyway.)
Also rethink the documentation: this behavior is a property of
all pl/pgsql expressions, not just assignments.
Discussion: https://postgr.es/m/20210122134106.e94c5cd7@mail.verfriemelt.org
This text claimed that the reconnection would occur "to the same
server", but there is no such guarantee in the code, nor would
insisting on that be an improvement.
Back-patch to v10 where multi-host connection strings were added.
Discussion: https://postgr.es/m/1095901.1611268376@sss.pgh.pa.us
Rephrase a few sentences to be more concise.
Refer to the postmaster process as "postmaster", not "postgres". This
originally said "postmaster process", but was changed to "postgres
process" in commit 5266f221a2, when we merged the "postmaster" and
"postgres" commands, and "postmaster" became just a symlink. That was a
case of overzealous search & replace, because the process is still called
"postmaster".
Author: Erik Rijkers and Jürgen Purtz
Discussion: https://www.postgresql.org/message-id/aa31f359-1168-ded5-53d0-0ed228bfe097%40iki.fi
The callback for retrieving state change information during connection
setup was only installed when the connection was mostly set up, and
thus didn't provide much information and missed all the details related
to the handshake.
This also extends the callback with SSL_state_string_long() to print
more information about the state change within the SSL object handled.
While there, fix some comments which were incorrectly referring to the
callback and its previous location in fe-secure.c.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/232CF476-94E1-42F1-9408-719E2AEC5491@yesql.se
"connection to server so-and-so failed:" seems clearer than the
previous wording "could not connect to so-and-so:" (introduced by
52a10224e), because the latter suggests a network-level connection
failure. We're now prefixing this string to all types of connection
failures, for instance authentication failures; so we need wording
that doesn't imply a low-level error.
Per discussion with Robert Haas.
Discussion: https://postgr.es/m/CA+TgmobssJ6rS22dspWnu-oDxXevGmhMD8VcRBjmj-b9UDqRjw@mail.gmail.com
Previously, pull_varnos() took the relids of a PlaceHolderVar as being
equal to the relids in its contents, but that fails to account for the
possibility that we have to postpone evaluation of the PHV due to outer
joins. This could result in a malformed plan. The known cases end up
triggering the "failed to assign all NestLoopParams to plan nodes"
sanity check in createplan.c, but other symptoms may be possible.
The right value to use is the join level we actually intend to evaluate
the PHV at. We can get that from the ph_eval_at field of the associated
PlaceHolderInfo. However, there are some places that call pull_varnos()
before the PlaceHolderInfos have been created; in that case, fall back
to the conservative assumption that the PHV will be evaluated at its
syntactic level. (In principle this might result in missing some legal
optimization, but I'm not aware of any cases where it's an issue in
practice.) Things are also a bit ticklish for calls occurring during
deconstruct_jointree(), but AFAICS the ph_eval_at fields should have
reached their final values by the time we need them.
The main problem in making this work is that pull_varnos() has no
way to get at the PlaceHolderInfos. We can fix that easily, if a
bit tediously, in HEAD by passing it the planner "root" pointer.
In the back branches that'd cause an unacceptable API/ABI break for
extensions, so leave the existing entry points alone and add new ones
with the additional parameter. (If an old entry point is called and
encounters a PHV, it'll fall back to using the syntactic level,
again possibly missing some valid optimization.)
Back-patch to v12. The computation is surely also wrong before that,
but it appears that we cannot reach a bad plan thanks to join order
restrictions imposed on the subquery that the PlaceHolderVar came from.
The error only became reachable when commit 4be058fe9 allowed trivial
subqueries to be collapsed out completely, eliminating their join order
restrictions.
Per report from Stephan Springl.
Discussion: https://postgr.es/m/171041.1610849523@sss.pgh.pa.us
ExecInitModifyTable has to initialize batching for all result relations,
not just the first one. Furthermore, when junk filters were necessary,
the pointer pointed past the mtstate->resultRelInfo array.
Per reports from multiple non-x86 animals (florican, locust, ...).
Discussion: https://postgr.es/m/20200628151002.7x5laxwpgvkyiu3q@development
"cl /?" produces a different output if run on a real or a virtual drive
(this can be set with a simple subst command), causing an error in the
MSVC scripts if building on a virtual drive because the platform to use
cannot be detected.
"cl /help", on the contrary, produces a consistent output if used on a
real or virtual drive. Changing to "/help" allows the compilation to
work with a virtual drive as long as the top of the code repository is
part of the drive, without impacting the build on real drives.
Reported-by: Robert Grange
Author: Juan José Santamaría Flecha
Discussion: https://postgr.es/m/16825-c4f104bcebc67034@postgresql.org
Extends the FDW API to allow batching inserts into foreign tables. That
is usually much more efficient than inserting individual rows, due to
high latency for each round-trip to the foreign server.
It was possible to implement something similar in the regular FDW API,
but it was inconvenient and there were issues with reporting the number
of actually inserted rows etc. This extends the FDW API with two new
functions:
* GetForeignModifyBatchSize - allows the FDW picking optimal batch size
* ExecForeignBatchInsert - inserts a batch of rows at once
Currently, only INSERT queries support batching. Support for DELETE and
UPDATE may be added in the future.
This also implements batching for postgres_fdw. The batch size may be
specified using "batch_size" option both at the server and table level.
The initial patch version was written by me, but it was rewritten and
improved in many ways by Takayuki Tsunakawa.
Author: Takayuki Tsunakawa
Reviewed-by: Tomas Vondra, Amit Langote
Discussion: https://postgr.es/m/20200628151002.7x5laxwpgvkyiu3q@development
The new command lists extended statistics objects. All past releases
with extended statistics are supported.
This is a simplified version of commit 891a1d0bca, which had to be
reverted due to not considering pg_statistic_ext_data is not accessible
by regular users. Fields requiring access to this catalog were removed.
It's possible to add them, but it'll require changes to core.
Author: Tatsuro Yamada
Reviewed-by: Julien Rouhaud, Alvaro Herrera, Tomas Vondra, Noriyoshi Shinoda
Discussion: https://postgr.es/m/c027a541-5856-75a5-0868-341301e1624b%40nttcom.co.jp_1
It emerges that in some phases of the moon (perhaps to do with
directory entry order?), xcrun will report that the SDK path is
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk
which is normally a symlink to a version-numbered sibling directory.
Our heuristic to skip non-version-numbered pathnames was rejecting
that, which is the wrong thing to do. We'd still like to end up
with a version-numbered PG_SYSROOT value, but we can have that by
dereferencing the symlink.
Like the previous fix, back-patch to all supported versions.
Discussion: https://postgr.es/m/522433.1611089678@sss.pgh.pa.us
By default VACUUM will skip pages that it can't immediately get
exclusive access to, which means that even activities as harmless
and unpredictable as checkpoint buffer writes might prevent a page
from being processed. Ordinarily this is no big deal, but we have
a small number of test cases that examine the results of VACUUM's
processing and therefore will fail if the page of interest is skipped.
This seems to be the explanation for some rare buildfarm failures.
To fix, add the DISABLE_PAGE_SKIPPING option to the VACUUM commands
in tests where this could be an issue.
In passing, remove a duplicated query in pageinspect/sql/page.sql.
Back-patch as necessary (some of these cases are as old as v10).
Discussion: https://postgr.es/m/413923.1611006484@sss.pgh.pa.us
In commit 9eb5607e69, I got the condition on checking for split or
deleted page wrong: I used && instead of ||. The comment correctly said
"concurrent split _or_ deletion".
As a result, GiST insertion could miss a concurrent split, and insert to
wrong page. Duncan Sands demonstrated this with a test script that did a
lot of concurrent inserts.
Backpatch to v12, where this was introduced. REINDEX is required to fix
indexes that were affected by this bug.
Backpatch-through: 12
Reported-by: Duncan Sands
Discussion: https://www.postgresql.org/message-id/a9690483-6c6c-3c82-c8ba-dc1a40848f11%40deepbluecap.com
DROP OWNED BY has a specific code path to remove ACLs stored in
pg_default_acl when cleaning up shared dependencies that had no
coverage with the existing tests. This issue has been found while
digging into the bug fixed by 21378e1.
As ALTER DEFAULT PRIVILEGES impacts the ACLs of all objects created
while the default permissions are visible, the test uses a transaction
rollback to isolate the test and avoid any impact with other sessions
running in parallel.
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/YAbQ1OD+3ip4lRv8@paquier.xyz
Specifying duplicated objects in this command would lead to unique
constraint violations in pg_default_acl or "tuple already updated by
self" errors. Similarly to GRANT/REVOKE, increment the command ID after
each subcommand processing to allow this case to work transparently.
A regression test is added by tweaking one of the existing queries of
privileges.sql to stress this case.
Reported-by: Andrus
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/ae2a7dc1-9d71-8cba-3bb9-e4cb7eb1f44e@hot.ee
Backpatch-through: 9.5
Somebody extended search_plan_tree() to treat MergeAppend exactly
like Append, which is 100% wrong, because unlike Append we can't
assume that only one input node is actively returning tuples.
Hence a cursor using a MergeAppend across a UNION ALL or inheritance
tree could falsely match a WHERE CURRENT OF query at a row that
isn't actually the cursor's current output row, but coincidentally
has the same TID (in a different table) as the current output row.
Delete the faulty code; this means that such a case will now return
an error like 'cursor "foo" is not a simply updatable scan of table
"bar"', instead of silently misbehaving. Users should not find that
surprising though, as the same cursor query could have failed that way
already depending on the chosen plan. (It would fail like that if the
sort were done with an explicit Sort node instead of MergeAppend.)
Expand the clearly-inadequate commentary to be more explicit about
what this code is doing, in hopes of forestalling future mistakes.
It's been like this for awhile, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/482865.1611075182@sss.pgh.pa.us
Block numbers are 32-bit unsigned integers. Therefore, the smallest
SQL integer type that they can fit in is bigint. However, in the
pageinspect module, most input and output parameters dealing with
block numbers were declared as int. The behavior with block numbers
larger than a signed 32-bit integer was therefore dubious. Change
these arguments to type bigint and add some more explicit error
checking on the block range.
(Other contrib modules appear to do this correctly already.)
Since we are changing argument types of existing functions, in order
to not misbehave if the binary is updated before the extension is
updated, we need to create new C symbols for the entry points, similar
to how it's done in other extensions as well.
Reported-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/d8f6bdd536df403b9b33816e9f7e0b9d@G08CNEXMBPEKD05.g08.fujitsu.local
Previously the document didn't mention the case where
postgres_fdw_get_connections() returns NULL in server_name column.
Users might be confused about why NULL was returned.
This commit adds the note that, in postgres_fdw_get_connections(),
the server name of an invalid connection will be NULL if the server is dropped.
Suggested-by: Zhijie Hou
Author: Bharath Rupireddy
Reviewed-by: Zhijie Hou, Fujii Masao
Discussion: https://postgr.es/m/e7ddd14e96444fce88e47a709c196537@G08CNEXMBPEKD05.g08.fujitsu.local
execCurrent.c's search_plan_tree() assumed that ForeignScanStates
and CustomScanStates necessarily have a valid ss_currentRelation.
This is demonstrably untrue for postgres_fdw's remote join and
remote aggregation plans, and non-leaf custom scans might not have
an identifiable scan relation either. Avoid crashing by ignoring
such nodes when the field is null.
This solution will lead to errors like 'cursor "foo" is not a
simply updatable scan of table "bar"' in cases where maybe we
could have allowed WHERE CURRENT OF to work. That's not an issue
for postgres_fdw's usages, since joins or aggregations would render
WHERE CURRENT OF invalid anyway. But an otherwise-transparent
upper level custom scan node might find this annoying. When and if
someone cares to expend work on such a scenario, we could invent a
custom-scan-provider callback to determine what's safe.
Report and patch by David Geier, commentary by me. It's been like
this for awhile, so back-patch to all supported branches.
Discussion: https://postgr.es/m/0253344d-9bdd-11c4-7f0d-d88c02cd7991@swarm64.com
Previously, the per-barrier-type functions tasked with absorbing
them were expected to always succeed and never throw an error.
However, that's a bit inconvenient. Further study has revealed that
there are realistic cases where it might not be possible to absorb
a ProcSignalBarrier without terminating the transaction, or even
the whole backend. Similarly, for some barrier types, there might
be other reasons where it's not reasonably possible to absorb the
barrier at certain points in the code, so provide a way for a
per-barrier-type function to reject absorbing the barrier.
Unfortunately, there's still no committed code making use of this
infrastructure; hopefully, we'll get there. :-(
Patch by me, reviewed by Andres Freund and Amul Sul.
Discussion: http://postgr.es/m/20200908182005.xya7wetdh3pndzim@alap3.anarazel.de
Discussion: http://postgr.es/m/CA+Tgmob56Pk1-5aTJdVPCWFHon7me4M96ENpGe9n_R4JUjjhZA@mail.gmail.com
Per Coverity. BuildIndexValueDescription() cannot actually return NULL in
this instance, because it only returns NULL if the user doesn't have the
required privileges, and this function can only be used by superuser. But
better safe than sorry.