Historically this message has been emitted at the end of ShutdownXLOG().
That's not an insane place for it in a standalone backend, but in the
postmaster environment we've grown a fair amount of stuff that happens
later, including archiver/walsender shutdown, stats collector shutdown,
etc. Recent buildfarm experimentation showed that on slower machines
there could be many seconds' delay between finishing ShutdownXLOG() and
actual postmaster exit. That's fairly confusing, both for testing
purposes and for DBAs. Hence, move the code that prints this message
into UnlinkLockFiles(), so that it comes out just after we remove the
postmaster's pidfile. That is a more appropriate definition of "is shut
down" from the point of view of "pg_ctl stop", for example. In general,
removing the pidfile should be the last externally-visible action of
either a postmaster or a standalone backend; compare commit
d73d14c271 for instance. So this seems
like a reasonably future-proof approach.
This finishes the work - spread across many commits over the last
several months - of putting each type of lock other than the named
individual locks into a separate tranche.
Amit Kapila
The original formulation of 4c9864b9b4
was extremely timing-sensitive, because it arranged for the deadlock
detector to be running (and possibly unblocking the current query)
at almost exactly the same time as isolationtester would be probing
to see if the query is blocked. The committed expected-file assumed
that the deadlock detection would finish first, but we see the opposite
on both fast and slow buildfarm animals. Adjust the deadlock timeout
settings to make it predictable that isolationtester *will* see the
query as waiting before deadlock detection unblocks it.
I used a 5s timeout for the same reasons mentioned in
a7921f71a3.
Fix a few oversights in 38f8bdcac4:
don't leak memory in run_permutation(), remember when we've issued
a cancel rather than issuing another one every 10ms,
fix some typos in comments.
Commit 0e141c0fbb introduced a new
facility to reduce ProcArrayLock contention by clearing several XIDs
from the ProcArray under a single lock acquisition. The names
initially chosen were deemed not to be very good choices, so commit
4aec49899e renamed them. But now it
seems like we still didn't get it right. A pending patch wants to
add similar infrastructure for batching CLOG updates, so the names
need to be clear enough to allow a new set of structure members with
a related purpose.
Amit Kapila
This allows testing of deadlock scenarios. Scenarios that would
previously have been considered invalid are now simply taken as a
scenario in which more than one backend will wait.
This is a necessary prerequisite for forthcoming changes to allow deadlock
scenarios to be tested by the isolation tester. It is also a good idea on
general principle, since these scenarios add no useful test coverage not
provided by other scenarios, but do to take time to execute.
Thirty seconds was not consistently enough for promotion to complete on
buildfarm members sungazer and tern. Experiments suggest 43s would have
been enough. Back-patch to 9.5, where pg_rewind was introduced.
Many automated test suites call pg_ctl. Buildfarm members axolotl,
hornet, mandrill, shearwater, sungazer and tern have failed when server
shutdown took longer than the pg_ctl default 60s timeout. This addition
permits slow hosts to easily raise the timeout without us editing a
--timeout argument into every test suite pg_ctl call. Back-patch to 9.1
(all supported versions) for the sake of automated testing.
Reviewed by Tom Lane.
It turns out that on FreeBSD-derived platforms (including OS X), the
*scanf() family of functions is pretty much brain-dead about multibyte
characters. In particular it will apply isspace() to individual bytes
of input even when those bytes are part of a multibyte character, thus
allowing false recognition of a field-terminating space.
We appear to have little alternative other than instituting a coding
rule that *scanf() is not to be used if the input string might contain
multibyte characters. (There was some discussion of relying on "%ls",
but that probably just moves the portability problem somewhere else,
and besides it doesn't fully prevent BSD *scanf() from using isspace().)
This patch is a down payment on that: it gets rid of use of sscanf()
to parse ispell dictionary files, which are certainly at great risk
of having a problem. The code is cleaner this way anyway, though
a bit longer.
In passing, improve a few comments.
Report and patch by Artur Zakirov, reviewed and somewhat tweaked by me.
Back-patch to all supported branches.
As of commit c1772ad922, there's no
longer any way of requesting additional LWLocks in the main tranche,
so we don't need NumLWLocks() or LWLockAssign() any more. Also,
some of the allocation counters that we had previously aren't needed
any more either.
Amit Kapila
Further investigation says that there may be some slow operations after
we've finished ShutdownXLOG(), so add some more log messages to try to
isolate that. This is all temporary code too.
If we've got a relatively straightforward join between two tables,
this pushes that join down to the remote server instead of fetching
the rows for each table and performing the join locally. Some cases
are not handled yet, such as SEMI and ANTI joins. Also, we don't
yet attempt to create presorted join paths or parameterized join
paths even though these options do get tried for a base relation
scan. Nevertheless, this seems likely to be a very significant win
in many practical cases.
Shigeru Hanada and Ashutosh Bapat, reviewed by Robert Haas, with
additional review at various points by Tom Lane, Etsuro Fujita,
KaiGai Kohei, and Jeevan Chalke.
Early returns from the buildfarm show that there's a bit of a gap in the
logging I added in 3971f64843: the portion of CreateCheckPoint()
after CheckPointGuts() can take a fair amount of time. Add a few more
log messages in that section of code. This too shall be reverted later.
This is a quick hack, due to be reverted when its purpose has been served,
to try to gather information about why some of the buildfarm critters
regularly fail with "postmaster does not shut down" complaints. Maybe they
are just really overloaded, but maybe something else is going on. Hence,
instrument pg_ctl to print the current time when it starts waiting for
postmaster shutdown and when it gives up, and add a lot of logging of the
current time in the server's checkpoint and shutdown code paths.
No attempt has been made to make this pretty. I'm not even totally sure
if it will build on Windows, but we'll soon find out.
Since pgindent treats typedef names as global, the original coding of
b47b4dbf68 would have had rather nasty effects on the formatting
of other files in which "string" is used as a variable or field name.
Use a less generic name for this typedef, and rename some other
identifiers to match.
Peter Geoghegan, per gripe from me
Previously, our regex code defined CHR_MAX as 0xfffffffe, which is a
bad choice because it is outside the range of type "celt" (int32).
Characters approaching that limit could lead to infinite loops in logic
such as "for (c = a; c <= b; c++)" where c is of type celt but the
range bounds are chr. Such loops will work safely only if CHR_MAX+1
is representable in celt, since c must advance to beyond b before the
loop will exit.
Fortunately, there seems no reason not to restrict CHR_MAX to 0x7ffffffe.
It's highly unlikely that Unicode will ever assign codes that high, and
none of our other backend encodings need characters beyond that either.
In addition to modifying the macro, we have to explicitly enforce character
range restrictions on the values of \u, \U, and \x escape sequences, else
the limit is trivially bypassed.
Also, the code for expanding case-independent character ranges in bracket
expressions had a potential integer overflow in its calculation of the
number of characters it could generate, which could lead to allocating too
small a character vector and then overwriting memory. An attacker with the
ability to supply arbitrary regex patterns could easily cause transient DOS
via server crashes, and the possibility for privilege escalation has not
been ruled out.
Quite aside from the integer-overflow problem, the range expansion code was
unnecessarily inefficient in that it always produced a result consisting of
individual characters, abandoning the knowledge that we had a range to
start with. If the input range is large, this requires excessive memory.
Change it so that the original range is reported as-is, and then we add on
any case-equivalent characters that are outside that range. With this
approach, we can bound the number of individual characters allowed without
sacrificing much. This patch allows at most 100000 individual characters,
which I believe to be more than the number of case pairs existing in
Unicode, so that the restriction will never be hit in practice.
It's still possible for range() to take awhile given a large character code
range, so also add statement-cancel detection to its loop. The downstream
function dovec() also lacked cancel detection, and could take a long time
given a large output from range().
Per fuzz testing by Greg Stark. Back-patch to all supported branches.
Security: CVE-2016-0773
Commit 7f46eaf added the regression test which checks that
gin_clean_pending_list() cleans up the GIN pending list and returns >0.
This usually works fine. But if autovacuum comes along and cleans
the list before gin_clean_pending_list() starts, the function may
return 0, and then the regression test may fail.
To fix the problem, this commit disables autovacuum on the target
index of gin_clean_pending_list() by setting autovacuum_enabled
reloption to off when creating the table.
Also this commit sets gin_pending_list_limit reloption to 4MB on
the target index. Otherwise when running "make installcheck" with
small gin_pending_list_limit GUC, insertions of data may trigger
the cleanup of pending list before gin_clean_pending_list() starts
and the function may return 0. This could cause the regression test
to fail.
Per buildfarm member spoonbill.
Reported-By: Tom Lane
In 61444bfb we started to allow HAVING clauses to be fully pushed down
into WHERE, even when grouping sets are in use. That turns out not to
work correctly, because grouping sets can "produce" NULLs, meaning that
filtering in WHERE and HAVING can have different results, even when no
aggregates or volatile functions are involved.
Instead only allow pushdown of empty grouping sets.
It'd be nice to do better, but the exact mechanics of deciding which
cases are safe are still being debated. It's important to give correct
results till we find a good solution, and such a solution might not be
appropriate for backpatching anyway.
Bug: #13863
Reported-By: 'wrb'
Diagnosed-By: Dean Rasheed
Author: Andrew Gierth
Reviewed-By: Dean Rasheed and Andres Freund
Discussion: 20160113183558.12989.56904@wrigleys.postgresql.org
Backpatch: 9.5, where grouping sets were introduced
Get rid of the false implication that PRIMARY KEY is exactly equivalent to
UNIQUE + NOT NULL. That was more-or-less true at one time in our
implementation, but the standard doesn't say that, and we've grown various
features (many of them required by spec) that treat a pkey differently from
less-formal constraints. Per recent discussion on pgsql-general.
I failed to resist the temptation to do some other wordsmithing in the
same area.
The parser doesn't allow qualification of column names appearing in
these clauses, but ruleutils.c would sometimes qualify them, leading
to dump/reload failures. Per bug #13891 from Onder Kalaci.
(In passing, make stanzas in ruleutils.c that save/restore varprefix
more consistent.)
Peter Geoghegan
Commit 45f6240a8f added an assumption in ExecHashIncreaseNumBatches
and ExecHashIncreaseNumBuckets that they could find all tuples in the main
hash table by iterating over the "dense storage" introduced by that patch.
However, ExecHashRemoveNextSkewBucket continued its old practice of simply
re-linking deleted skew tuples into the main table's hashchains. Hence,
such tuples got lost during any subsequent increase in nbatch or nbuckets,
and would never get joined, as reported in bug #13908 from Seth P.
I (tgl) think that the aforesaid commit has got multiple design issues
and should be reworked rather completely; but there is no time for that
right now, so band-aid the problem by making ExecHashRemoveNextSkewBucket
physically copy deleted skew tuples into the "dense storage" arena.
The added test case is able to exhibit the problem by means of fooling the
planner with a WHERE condition that it will underestimate the selectivity
of, causing the initial nbatch estimate to be too small.
Tomas Vondra and Tom Lane. Thanks to David Johnston for initial
investigation into the bug report.
When force_parallel_mode = true, we enable the parallel mode restrictions
for all queries for which this is believed to be safe. For the subset of
those queries believed to be safe to run entirely within a worker, we spin
up a worker and run the query there instead of running it in the
original process. When force_parallel_mode = regress, make additional
changes to allow the regression tests to run cleanly even though parallel
workers have been injected under the hood.
Taken together, this facilitates both better user testing and better
regression testing of the parallelism code.
Robert Haas, with help from Amit Kapila and Rushabh Lathia.
For locking purposes, we now regard heavyweight locks as mutually
non-conflicting between cooperating parallel processes. There are some
possible pitfalls to this approach that are not to be taken lightly,
but it works OK for now and can be changed later if we find a better
approach. Without this, it's very easy for parallel queries to
silently self-deadlock if the user backend holds strong relation locks.
Robert Haas, with help from Amit Kapila. Thanks to Noah Misch and
Andres Freund for extensive discussion of possible issues with this
approach.
It seems that sprintf(), at least in glibc's version, is unreasonably slow
compared to hand-rolled code for printing integers. Replacing most uses of
sprintf() in the datetime.c output functions with special-purpose code
turns out to give more than a 2X speedup in COPY of a table with a single
timestamp column; which is pretty impressive considering all the other
logic in that code path.
David Rowley and Andres Freund, reviewed by Peter Geoghegan and myself
Commit 30d7ae3c76 introduced an HJDEBUG
stanza that probably didn't compile at the time, and definitely doesn't
compile now, because it refers to a nonexistent variable. It doesn't seem
terribly useful anyway, so just get rid of it.
While I'm fooling with it, use %z modifier instead of the obsolete hack of
casting size_t to unsigned long, and include the HashJoinTable's address in
each printout so that it's possible to distinguish the activities of
multiple hashjoins occurring in one query.
Noted while trying to use HJDEBUG to investigate bug #13908. Back-patch
to 9.5, because code that doesn't compile is certainly not very helpful.
Future PL/Java versions will close CVE-2016-0766 by making these GUCs
PGC_SUSET. This PostgreSQL change independently mitigates that PL/Java
vulnerability, helping sites that update PostgreSQL more frequently than
PL/Java. Back-patch to 9.1 (all supported versions).
Commit a104a017fc has this check because
I added it to the submitted patch before commit, but that was entirely
wrongheaded, as explained to me by Ashutosh Bapat, who also wrote this
patch.
An example use-case is "CHECK(num_nonnulls(a,b,c) = 1)" to assert that
exactly one of a,b,c isn't NULL. The functions are variadic, so they
can also be pressed into service to count the number of null or nonnull
elements in an array.
Marko Tiikkaja, reviewed by Pavel Stehule
deparseReturningList ended up adding up RETURNING NULL to the code, but
code elsewhere saw an empty list of attributes and concluded that it
should not expect tuples from the remote side.
Etsuro Fujita and Robert Haas, reviewed by Thom Brown