If malloc(0) returns NULL, the binary search in findSecLabels() will
probably go into an infinite loop when there are no security labels,
because NULL-1 is greater than NULL after wraparound.
(We've seen this pathology before ... I wonder whether there's a way to
detect the class of bugs automatically?)
Diagnosis and patch by Steve Singer, cosmetic adjustments by me
Forgot to call RestoreBkpBlocks() in the redo-function, as pointed out by
Simon Riggs. In redo of a regular heap insert, it's taken care of in
heap_redo(), but this new record type uses the heap2 RM, and heap2_redo()
does not take care of that for you.
Also, failed to reset the vmbuffer and all_visibile_cleared local variables
after switching to a new buffer.
It used to be cleaned in maintainer-clean, but that is inconsistent
with other cleaning of NLS files in nls-global.mk, and it's also wrong
overall, because it's not part of the distribution tarball, which is
the base definition of the maintainer-clean target.
This greatly reduces the WAL volume, especially when the table is narrow.
The overhead of locking the heap page is also reduced. Reduced WAL traffic
also makes it scale a lot better, if you run multiple COPY processes at
the same time.
In particular, my previous patch expected the create_index test to run
before the inherit test; but this was only true in the serial schedule.
Rearrange this portion of the schedules to be more consistent.
Per buildfarm results.
Add PlaceHolderVar wrappers as needed to make UNION ALL sub-select output
expressions appear non-constant and distinct from each other. This makes
the world safe for add_child_rel_equivalences to do what it does. Before,
it was possible for that function to add identical expressions to different
EquivalenceClasses, which logically should imply merging such ECs, which
would be wrong; or to improperly add a constant to an EquivalenceClass,
drastically changing its behavior. Per report from Teodor Sigaev.
The only currently known consequence of this bug is "MergeAppend child's
targetlist doesn't match MergeAppend" planner failures in 9.1 and later.
I am suspicious that there may be other failure modes that could affect
older release branches; but in the absence of any hard evidence, I'll
refrain from back-patching further than 9.1.
a new macro, DatumGetInetPP(), that does not. This brings these macros
in line with other DatumGet*P() macros.
Backpatch to 8.3, where 1-byte header varlenas were introduced.
Since PostgreSQL 9.0, we've emitted a warning message when an operator
named => is created, because the SQL standard now reserves that token
for another use. But we've also shipped such an operator with hstore.
Use of the function hstore(text, text) has been recommended in
preference to =>(text, text). Per discussion, it's now time to take
the next step and stop shipping the operator. This will allow us to
prohibit the use of => as an operator name in a future release if and
when we wish to support the SQL standard use of this token.
The release notes should mention this incompatibility.
Patch by me, reviewed by David Wheeler, Dimitri Fontaine and Tom Lane.
In a regular VACUUM, it's OK to skip pages for which a cleanup lock
isn't immediately available; the next VACUUM will deal with them. If
we're scanning the entire relation to advance relfrozenxid, we might
need to wait, but only if there are tuples on the page that actually
require freezing. These changes should greatly reduce the incidence
of of vacuum processes getting "stuck".
Simon Riggs and Robert Haas
Make it use t_isspace() to identify whitespace, rather than relying on
sscanf which is known to get it wrong on some platform/locale combinations.
Get rid of fixed-size buffers. Make it actually continue to parse the file
after ignoring a line with untranslatable characters, as was obviously
intended.
The first of these issues is per gripe from J Smith, though not exactly
either of his proposed patches.
Further experimentation reveals that my previous change didn't fix the
issue entirely: these tests would still fail at the spring-forward DST
transition. There doesn't seem to be any great value in testing this
specific issue for both timestamp and timestamptz, so just lose the
latter tests.
It was inadvertently changed to 201111111, which is a wrong date. Change it
to current date, and remove the comment that was supposed to remind me to
fix it before committing.
This assumption can be wrong when the toaster is passed a raw on-disk
tuple, because the tuple might pre-date an ALTER TABLE ADD COLUMN operation
that added columns without rewriting the table. In such a case the tuple's
natts value is smaller than what we expect from the tuple descriptor, and
so its t_hoff value could be smaller too. In fact, the tuple might not
have a null bitmap at all, and yet our current opinion of it is that it
contains some trailing nulls.
In such a situation, toast_insert_or_update did the wrong thing, because
to save a few lines of code it would use the old t_hoff value as the offset
where heap_fill_tuple should start filling data. This did not leave enough
room for the new nulls bitmap, with the result that the first few bytes of
data could be overwritten with null flag bits, as in a recent report from
Hubert Depesz Lubaczewski.
The particular case reported requires ALTER TABLE ADD COLUMN followed by
CREATE TABLE AS SELECT * FROM ... or INSERT ... SELECT * FROM ..., and
further requires that there be some out-of-line toasted fields in one of
the tuples to be copied; else we'll not reach the troublesome code.
The problem can only manifest in this form in 8.4 and later, because
before commit a77eaa6a95, CREATE TABLE AS or
INSERT/SELECT wouldn't result in raw disk tuples getting passed directly
to heap_insert --- there would always have been at least a junkfilter in
between, and that would reconstitute the tuple header with an up-to-date
t_natts and hence t_hoff. But I'm backpatching the tuptoaster change all
the way anyway, because I'm not convinced there are no older code paths
that present a similar risk.
I broke it in a previous commit because I neglected to install the
necessary incantations to have getopt() work on Windows.
Per red blots in buildfarm.
Both dict_int and dict_xsyn were blithely assuming that whatever memory
palloc gives back will be pre-zeroed. This would typically work for
just about long enough to run their regression tests, and no longer :-(.
The pre-9.0 code in dict_xsyn was even lamer than that, as it would
happily give back a pointer to the result of palloc(0), encouraging
its caller to access off the end of memory. Again, this would just
barely fail to fail as long as memory contained nothing but zeroes.
Per a report from Rodrigo Hjort that code based on these examples
didn't work reliably.
inline_set_returning_function failed to distinguish functions returning
generic RECORD (which require a column list in the RTE, as well as run-time
type checking) from those with multiple OUT parameters (which do not).
This prevented inlining from happening. Per complaint from Jay Levitt.
Back-patch to 8.4 where this capability was introduced.
This mode prints out the permutations that would be run by the given
spec file, in the same format used by the permutation lines in spec
files. This helps in building new spec files.
Author: Alexander Shulgin, with some tweaks by me
Instead of filling files as they appear, pre-pad the
WAL files received when streaming xlog the same way
that the server does. Data is streamed into a .partial
file which is then renamed()d into palce when it's complete,
but it will always be 16MB.
This also means that the starting position for pg_receivexlog
is now simply right after the last complete segment, and we
never need to deal with partial segments there.
Patch by me, review by Fujii Masao
If we use a PlaceHolderVar from the outer relation in an inner indexscan,
we need to reference the PlaceHolderVar as such as the value to be passed
in from the outer relation. The previous code effectively tried to
reconstruct the PHV from its component expression, which doesn't work since
(a) the Vars therein aren't necessarily bubbled up far enough, and (b) it
would be the wrong semantics anyway because of the possibility that the PHV
is supposed to have gone to null at some point before the current join.
Point (a) led to "variable not found in subplan target list" planner
errors, but point (b) would have led to silently wrong answers.
Per report from Roger Niederland.
If we have an inequality key that constrains the other end of the index,
it doesn't directly help us in doing the initial positioning ... but it
does imply a NOT NULL constraint on the index column. If the index stores
nulls at this end, we can use the implied NOT NULL condition for initial
positioning, just as if it had been stated explicitly. This avoids wasting
time when there are a lot of nulls in the column. This is the reverse of
the examples given in bugs #6278 and #6283, which were about failing to
stop early when we encounter nulls at the end of the indexscan.
As pointed out by Naoya Anzai, my previous try at this was a few bricks
shy of a load, because I had forgotten that the initial-positioning logic
might not try to skip over nulls at the end of the index the scan will
start from. We ought to fix that, because it represents an unnecessary
inefficiency, but first let's get the scan-stop logic back to a safe
state. With this patch, we preserve the performance benefit requested
in bug #6278 for the case of scanning forward into NULLs (in a NULLS
LAST index), but the reverse case of scanning backward across NULLs
when there's no suitable initial-positioning qual is still inefficient.
Tom Lane
Peter Eisentraut
Bruce Momjian
Heikki Linnakangas
Robert Haas
Magnus Hagander
Simon Riggs
Alvaro Herrera
Andrew Dunstan