If you create a table and don't insert any data into it, the relation file
is never fsync'd. You don't lose data, because an empty table doesn't have
any data to begin with, but if you crash and lose the file, subsequent
operations on the table will fail with "could not open file" error.
To fix, register an fsync request in mdcreate(), like we do for mdwrite().
Per discussion, we probably should also fsync the containing directory
after creating a new file. But that's a separate and much wider issue.
Backpatch to all supported versions.
Reviewed-by: Andres Freund, Thomas Munro
Discussion: https://www.postgresql.org/message-id/d47d8122-415e-425c-d0a2-e0160829702d%40iki.fi
It's OK to be lazy about re-binning memory segments when allocating,
because that can only leave segments in a bin that's too high. We'll
search higher bins if necessary while allocating next time, and
also eventually re-bin, so no memory can become unreachable that way.
However, when freeing memory, the largest contiguous range of free pages
might go up, so we should re-bin eagerly to make sure we don't leave the
segment in a bin that is too low for get_best_segment() to find.
The re-binning code is moved into a function of its own, so it can be
called whenever free pages are returned to the segment's free page map.
Back-patch to all supported releases.
Author: Dongming Liu <ldming101@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier version)
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CAL1p7e8LzB2LSeAXo2pXCW4%2BRya9s0sJ3G_ReKOU%3DAjSUWjHWQ%40mail.gmail.com
The ginfast.c code previously checked for conflicts in before locking
the relevant buffer, leaving a window where a RW conflict could be
missed. Re-order.
There was also a place where buffer ID and block number were confused
while trying to predicate-lock a page, noted by visual inspection.
Back-patch to all supported releases. Fixes one more problem discovered
with the reproducer from bug #17949, in this case when Dmitry tried
other index types.
Reported-by: Artem Anisimov <artem.anisimov.255@gmail.com>
Reported-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/17949-a0f17035294a55e2%40postgresql.org
When performing a bitmap heap scan, we don't want to miss concurrent
writes that occurred after we observed the heap's rs_nblocks, but before
we took predicate locks on index pages. Therefore, we can't skip
fetching any heap tuples that are referenced by the index, because we
need to test them all with CheckForSerializableConflictOut(). The
old optimization that would ignore any references to blocks >=
rs_nblocks gets in the way of that requirement, because it means that
concurrent writes in that window are ignored.
Removing that optimization shouldn't affect correctness at any isolation
level, because any new tuples shouldn't be visible to an MVCC snapshot.
There also shouldn't be any error-causing references to heap blocks past
the end, because we should have held at least an AccessShareLock on the
table before the index scan. It can't get smaller while our transaction
is running. For now, though, we'll keep the optimization at lower
levels to avoid making unnecessary changes in a bug fix.
Back-patch to all supported releases. In release 11, the code is in a
different place but not fundamentally different. Fixes one aspect of
bug #17949.
Reported-by: Artem Anisimov <artem.anisimov.255@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/17949-a0f17035294a55e2%40postgresql.org
When predicate-locking btrees, we have a special case for completely
empty btrees, since there is no page to lock. This was racy, because,
without buffer lock held, a matching key could be inserted between the
_bt_search() and the PredicateLockRelation() calls.
Fix, by rechecking _bt_search() after taking the relation-level SIREAD
lock, if using SERIALIZABLE isolation and an empty btree is discovered.
Back-patch to all supported releases. Fixes one aspect of bug #17949.
Reported-by: Artem Anisimov <artem.anisimov.255@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/17949-a0f17035294a55e2%40postgresql.org
The test inserted 70k rows into a foreign table, in order to verify
correct behavior with more than 65535 parameters, and was added in
response to a bug report.
However, this is rather expensive, especially when running the tests
under valgrind, CLOBBER_CACHE_ALWAYS etc. It doesn't seem worth it to
keep running the test, so remove it from all branches (14+).
Backpatch-through: 14
Discussion: https://postgr.es/m/2131017.1623451468@sss.pgh.pa.us
Creation of a file with a very long name can create problems on Windows
due to its file path limits. Work around that by creating the file via a
symlink with a shorter name.
Error displayed by buildfarm animal fairywren.o
Backpatch to all live branches
When set, this environment variable was only effective for data
directories but not for all the other temporary files created by
PostgreSQL::Test::Utils. Keeping the temporary files after a successful
run can be useful for debugging purposes.
The documentation is updated to reflect the new behavior, with contents
available in doc/ since v16 and in src/test/perl/README since v15.
Author: Jacob Champion
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/CAAWbhmgHtDH1SGZ+Fw05CsXtE0mzTmjbuUxLB9mY9iPKgM6cUw@mail.gmail.com
Discussion: https://postgr.es/m/YyPd9unV14SX2bLF@paquier.xyz
Backpatch-through: 11
Commit dd38ff28ad added a new error message "missing contrecord" when
we fail to reassemble a record. Unfortunately that caused noisy
messages to be logged by pg_waldump at end of segment, and by walsender
when asked to shut down on a segment boundary.
Remove the new error message, so that this condition signals end-of-
WAL without a message. It's arguably a reportable condition that should
not be silenced while performing crash recovery, but fixing that without
introducing noise in the other cases will require more research.
Back-patch to 15.
Reported-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/6a1df56e-4656-b3ce-4b7a-a9cb41df8189%40enterprisedb.com
Commit f24523672d fixed a memory leak by moving the modifiedCols bitmap
into the per-row memory context. In the case of AFTER UPDATE triggers,
the bitmap is however referenced from an event kept until the end of the
query, resulting in a use-after-free bug.
Fixed by copying the bitmap into the AfterTriggerEvents memory context,
which is the one where we keep the trigger events. There's only one
place that needs to do the copy, but the memory context may not exist
yet. Doing that in a separate function seems more readable.
Report by Alexander Pyhalov, fix by me. Backpatch to 13, where the
bitmap was added to the event by commit 71d60e2aa0.
Reported-by: Alexander Pyhalov
Backpatch-through: 13
Discussion: https://postgr.es/m/acddb17c89b0d6cb940eaeda18c08bbe@postgrespro.ru
The Incremental Sort had a couple issues, resulting in leaking memory
during rescans, possibly triggering OOM. The code had a couple of
related flaws:
1. During rescans, the sort states were reset but then also set to NULL
(despite the comment saying otherwise). ExecIncrementalSort then
sees NULL and initializes a new sort state, leaking the memory used
by the old one.
2. Initializing the sort state also automatically rebuilt the info about
presorted keys, leaking the already initialized info. presorted_keys
was also unnecessarily reset to NULL.
Patch by James Coleman, based on patches by Laurenz Albe and Tom Lane.
Backpatch to 13, where Incremental Sort was introduced.
Author: James Coleman, Laurenz Albe, Tom Lane
Reported-by: Laurenz Albe, Zu-Ming Jiang
Backpatch-through: 13
Discussion: https://postgr.es/m/b2bd02dff61af15e3526293e2771f874cf2a3be7.camel%40cybertec.at
Discussion: https://postgr.es/m/db03c582-086d-e7cd-d4a1-3bc722f81765%40inf.ethz.ch
a316a3bc fixed the code in build_simpl_rel() that propagates
RelOptInfo.userid from parent to child rels so that it works
correctly for the child rels of a UNION ALL subquery rel, though
no tests were added in that commit. So do so here.
As noted in the discussion, coming up with a test case in the core
regression suite for this fix has turned out to be tricky, so the
test case is added to the postgres_fdw's suite instead.
postgresGetForeignRelSize()'s use of user mapping for the user
specified in RelOptInfo.userid makes it relatively easier to craft
a test case around.
Discussion: https://postgr.es/m/CA%2BHiwqH91GaFNXcXbLAM9L%3DzBwUmSyv699Mtv3i1_xtk9Xec_A%40mail.gmail.com
Backpatch-through: 16
The logic that introduced partitioned indexes missed a few things when
invalidating a partitioned index when these are created, still the code
is written to handle recursions:
1) If created from scratch because a mapping index could not be found,
the new index created could be itself invalid, if for example it was a
partitioned index with one of its leaves invalid.
2) A CCI was missing when indisvalid is set for a parent index, leading
to inconsistent trees when recursing across more than one level for a
partitioned index creation if an invalidation of the parent was
required.
This could lead to the creation of a partition index tree where some of
the partitioned indexes are marked as invalid, but some of the parents
are marked valid, which is not something that should happen (as
validatePartitionedIndex() defines, indisvalid is switched to true for a
partitioned index iff all its partitions are themselves valid).
This patch makes sure that indisvalid is set to false on a partitioned
index if at least one of its partition is invalid. The flag is set to
true if *all* its partitions are valid.
The regression test added in this commit abuses of a failed concurrent
index creation, marked as invalid, that maps with an index created on
its partitioned table afterwards.
Reported-by: Alexander Lakhin
Reviewed-by: Alexander Lakhin
Discussion: https://postgr.es/m/14987634-43c0-0cb3-e075-94d423607e08@gmail.com
Backpatch-through: 11
ALTER TABLE .. SET ACCESS METHOD was not registering a dependency to the
new access method with the relation altered in its rewrite phase, making
possible the drop of an access method even if there are relations that
depend on it. During the rewrite, a temporary relation is created to
build the new relation files before swapping the new and old files, and,
while the temporary relation was registering a correct dependency to the
new AM, the old relation did not do that. A dependency on the access
method is added when the relation files are swapped, which is the point
where pg_class is updated.
Materialized views and tables use the same code path, hence both were
impacted.
Backpatch down to 15, where this command has been introduced.
Reported-by: Alexander Lakhin
Reviewed-by: Nathan Bossart, Andres Freund
Discussion: https://postgr.es/m/18000-9145c25b1af475ca@postgresql.org
Backpatch-through: 15
run_command(check: true) already would have errorred out before the check is
reached.
Author: Tristan Partin <tristan@neon.tech>
Discussion: CSPIJVUDZFKX.3KHMOAVGF94RV@c3po
An outer join cannot be formed using an input path that is parameterized
by a value that is supposed to be nulled by the outer join. This is
obviously nonsensical, and it could lead to a bad plan being selected;
although currently it seems that we'll hit various sanity-check
assertions first.
I think that such cases were formerly prevented by the delay_upper_joins
mechanism, but now that that's gone we need an explicit check.
(Perhaps we should avoid generating baserel paths that could
lead to this situation in the first place; but it seems like
having a defense at the join level would be a good idea anyway.)
Richard Guo and Tom Lane, per report from Jaime Casanova
Discussion: https://postgr.es/m/CAJKUy5g2uZRrUDZJ8p-=giwcSHVUn0c9nmdxPSY0jF0Ov8VoEA@mail.gmail.com
If the given composite datum is toasted out-of-line,
DatumGetHeapTupleHeader will perform database accesses to detoast it.
That can invalidate the result of get_cached_rowtype, as documented
(perhaps not plainly enough) in that function's API spec; which leads
to strange errors or crashes when we try to use the TupleDesc to read
the tuple. In short then, trying to update a field of a composite
column could fail intermittently if the overall column value is wide
enough to require toasting.
We can fix the bug at no cost by just changing the order of
operations, since we don't need the TupleDesc until after detoasting.
(Other callers of get_cached_rowtype appear to get this right already,
so there's only one bug.)
Note that the added regression test case reveals this bug reliably
only with debug_discard_caches/CLOBBER_CACHE_ALWAYS.
Per bug #17994 from Alexander Lakhin. Sadly, this patch does not fix
the missing-values issue revealed in the bug discussion; we'll need
some more work to cover that.
Discussion: https://postgr.es/m/17994-5c7100b51b4790e9@postgresql.org
Meson validates 'choice' options for us, so technically this case is
impossible. A better error message helps people reading the code
understand what is going on in that branch.
Author: Tristan Partin <tristan@neon.tech>
Discussion: https://www.postgresql.org/message-id/flat/CSPIJVUDZFKX.3KHMOAVGF94RV%40c3po
It was walking into the ColumnDef->compression field, which is not a
node but a string. This code is currently not reachable (because the
compression field is only set in situations that don't go through
raw_expression_tree_walker()), but if it had been, this could have
behaved erratically.
Not including the timeline IDs to the file names generated by pg_waldump
for the individual blocks saved could cause some of these files to be
overwritten when scanning segments across multiple timelines. Having
this information is also as much useful as the LSNs, to be able to know
from exactly which WAL segment a block is comes from.
While on it, this fixes a few comments in the tests, where the format of
the file was not described as matching with the reality.
Reported-by: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, David Christensen
Discussion: https://postgr.es/m/ZJp921+nITFnvBVS@paquier.xyz
A portion of ALTER TABLE .. ATTACH PARTITION is to ensure that the
partition being attached to the partitioned table has a correct set of
indexes, so as there is a consistent index mapping between the
partitioned table and its new-to-be partition. However, as introduced
in 8b08f7d, the current logic could choose an invalid index as a match,
which is something that can exist when dealing with more than two levels
of partitioning, like attaching a partitioned table (that has
partitions, with an index created by CREATE INDEX ON ONLY) to another
partitioned table.
A partitioned index with indisvalid set to false is equivalent to an
incomplete partition tree, meaning that an invalid partitioned index
does not have indexes defined in all its partitions. Hence, choosing an
invalid partitioned index can create inconsistent partition index trees,
where the parent attaching to is valid, but its partition may be
invalid.
In the report from Alexander Lakhin, this showed up as an assertion
failure when validating an index. Without assertions enabled, the
partition index tree would be actually broken, as indisvalid should
be switched to true for a partitioned index once all its partitions are
themselves valid. With two levels of partitioning, the top partitioned
table used a valid index and was able to link to an invalid index stored
on its partition, itself a partitioned table.
I have studied a few options here (like the possibility to switch
indisvalid to false for the parent), but came down to the conclusion
that we'd better rely on a simple rule: invalid indexes had better never
be chosen, so as the partition attached uses and creates indexes that
the parent expects. Some regression tests are added to provide some
coverage. Note that the existing coverage is not impacted.
This is a problem since partitioned indexes exist, so backpatch all the
way down to v11.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/14987634-43c0-0cb3-e075-94d423607e08@gmail.com
Backpatch-through: 11
Since 3db72eb, the query ID of utilities is generated using the Query
structure, making the use of the query string in JumbleQuery()
unnecessary. This commit removes the argument "querytext" from
JumbleQuery().
Reported-by: Joe Conway
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/ZJlQAWE4COFqHuAV@paquier.xyz
TParserGet() recurses for some token types, meaning it's possible
to drive it to stack overflow. Since this is a minority behavior,
I chose to add the check_stack_depth() call to the two places that
recurse rather than doing it during every single call.
While at it, add CHECK_FOR_INTERRUPTS(), because this can run
unpleasantly long for long inputs.
Per bug #17995 from Zuming Jiang. This is old, so back-patch
to all supported branches.
Discussion: https://postgr.es/m/17995-9f20ff3e6389db4c@postgresql.org
