> >>with allowed values of "all, mod, ddl, none" with default "none".
OK, here is a patch that implements #1. Here is sample output:
test=> set client_min_messages = 'log';
SET
test=> set log_statement = 'mod';
SET
test=> select 1;
?column?
----------
1
(1 row)
test=> update test set x=1;
LOG: statement: update test set x=1;
ERROR: relation "test" does not exist
test=> update test set x=1;
LOG: statement: update test set x=1;
ERROR: relation "test" does not exist
test=> copy test from '/tmp/x';
LOG: statement: copy test from '/tmp/x';
ERROR: relation "test" does not exist
test=> copy test to '/tmp/x';
ERROR: relation "test" does not exist
test=> prepare xx as select 1;
PREPARE
test=> prepare xx as update x set y=1;
LOG: statement: prepare xx as update x set y=1;
ERROR: relation "x" does not exist
test=> explain analyze select 1;;
QUERY PLAN
------------------------------------------------------------------------------------
Result (cost=0.00..0.01 rows=1 width=0) (actual time=0.006..0.007 rows=1 loops=1)
Total runtime: 0.046 ms
(2 rows)
test=> explain analyze update test set x=1;
LOG: statement: explain analyze update test set x=1;
ERROR: relation "test" does not exist
test=> explain update test set x=1;
ERROR: relation "test" does not exist
It checks PREPARE and EXECUTE ANALYZE too. The log_statement values are
'none', 'mod', 'ddl', and 'all'. For 'all', it prints before the query
is parsed, and for ddl/mod, it does it right after parsing using the
node tag (or command tag for CREATE/ALTER/DROP), so any non-parse errors
will print after the log line.
is measured in kilobytes and checked against actual physical execution
stack depth, as per my proposal of 30-Dec. This gives us a fairly
bulletproof defense against crashing due to runaway recursive functions.
listen_addresses parameter, as per recent discussion. The default behavior
is now to listen on localhost, which eliminates the need for the -i
postmaster switch in many scenarios.
Andrew Dunstan
#log_line_prefix = '' # e.g. '<%u%%%d> '
# %u=user name %d=database name
# %r=remote host and port
# %p=PID %t=timestamp %i=command tag
# %c=session id %l=session line number
# %s=session start timestamp
# %x=stop here in non-session processes
# %%='%'
Andrew Dunstan
number of openable files and the number already opened. This eliminates
depending on sysconf(_SC_OPEN_MAX), and allows much saner behavior on
platforms where open-file slots are used up by semaphores.
vacuum delay feature, including updating the docs for Tom's recent
improvements. There is still more work to be done here: for example,
adding some more information on the practical use of cost-based
vacuum delay to the "maintenance" section would probably be a good
idea.
Make btree index creation and initial validation of foreign-key constraints
use maintenance_work_mem rather than work_mem as their memory limit.
Add some code to guc.c to allow these variables to be referenced by their
old names in SHOW and SET commands, for backwards compatibility.
that it's good to join where there are join clauses rather than where there
are not. Also enable it to generate bushy plans at need, so that it doesn't
fail in the presence of multiple IN clauses containing sub-joins. These
changes appear to improve the behavior enough that we can substantially reduce
the default pool size and generations count, thereby decreasing the runtime,
and yet get as good or better plans as we were getting in 7.4. Consequently,
adjust the default GEQO parameters. I also modified the way geqo_effort is
used so that it affects both population size and number of generations;
it's now useful as a single control to adjust the GEQO runtime-vs-plan-quality
tradeoff. Bump geqo_threshold to 12, since even with these changes GEQO
seems to be slower than the regular planner at 11 relations.
default value for geqo_effort is supposed to be 40, not 1. The actual
'genetic' component of the GEQO algorithm has been practically disabled
since 7.1 because of this mistake. Improve documentation while at it.
intended to allow application authors to insulate themselves from
changes to the default value of 'default_with_oids' in future releases
of PostgreSQL.
This patch also fixes a bug in the earlier implementation of the
'default_with_oids' GUC variable: code in gram.y should not examine
the value of GUC variables directly due to synchronization issues.
proposal for eventually deprecating OIDs on user tables that I posted
earlier to pgsql-hackers. pg_dump now always specifies WITH OIDS or
WITHOUT OIDS when dumping a table. The documentation has been updated.
Neil Conway
> only think to look at sort_mem if they already had a clue. It should
> be mentioned under bulk data load (in performance tips chapter)
Attached is a doc patch that does this. The way I've worded it may not
be the best, though.
Neil Conway
of function bodies is done at CREATE FUNCTION time. This is normally
true but can be set false to avoid problems with forward references,
wrong schema search path, etc. This is just the backend patch, still
need to adjust pg_dump to make use of it.
sequence every time it's called is bogus --- it interferes with user
control over the seed, and actually decreases randomness overall
(because a seed based on time(NULL) is pretty predictable). If you really
want a reproducible result from geqo, do 'set seed = 0' before planning
a query.
heuristic determination of day vs month in date/time input. Add the
ability to specify that input is interpreted as yy-mm-dd order (which
formerly worked, but only for yy greater than 31). DateStyle's input
component now has the preferred spellings DMY, MDY, or YMD; the older
keywords European and US are now aliases for the first two of these.
Per recent discussions on pgsql-general.
>>ISTM that "source" is worth knowing.
>
> Hm, possibly. Any other opinions?
This version has the seven fields I proposed, including "source". Here's
an example that shows why I think it's valuable:
regression=# \x
Expanded display is on.
regression=# select * from pg_settings where name = 'enable_seqscan';
-[ RECORD 1 ]-----------
name | enable_seqscan
setting | on
context | user
vartype | bool
source | default
min_val |
max_val |
regression=# update pg_settings set setting = 'off' where name =
'enable_seqscan';
-[ RECORD 1 ]---
set_config | off
regression=# select * from pg_settings where name = 'enable_seqscan';
-[ RECORD 1 ]-----------
name | enable_seqscan
setting | off
context | user
vartype | bool
source | session
min_val |
max_val |
regression=# alter user postgres set enable_seqscan to 'off';
ALTER USER
(log out and then back in again)
regression=# \x
Expanded display is on.
regression=# select * from pg_settings where name = 'enable_seqscan';
-[ RECORD 1 ]-----------
name | enable_seqscan
setting | off
context | user
vartype | bool
source | user
min_val |
max_val |
In the first case, enable_seqscan is set to its default value. After
setting it to off, it is obvious that the value has been changed for the
session only. In the third case, you can see that the value has been set
specifically for the user.
Joe Conway
and 100 respectively, if the platform will allow it. initdb selects
values that are not too large to allow the postmaster to start, and
places these values in the installed postgresql.conf file. This allows
us to continue to start up out-of-the-box on platforms with small SHMMAX,
while having somewhat-realistic default settings on platforms with
reasonable SHMMAX. Per recent pghackers discussion.
without needing a running backend. Reorder postgresql.conf.sample
to match new layout of runtime.sgml. This commit re-adds work lost
in Wednesday's crash.
only remnant of this failed experiment is that the server will take
SET AUTOCOMMIT TO ON. Still TODO: provide some client-side autocommit
logic in libpq.
find out about it is to read the documentation that tells you how
dangerous it is. Add default_transaction_read_only to documentation;
seems to have been overlooked in patch that added read-only transactions.
Clean up check_guc comparison script, which has been suffering bit rot.
page when it's read in, per pghackers discussion around 17-Feb. Add a
GUC variable zero_damaged_pages that causes the response to be a WARNING
followed by zeroing the page, rather than the normal ERROR; this is per
Hiroshi's suggestion that there needs to be a way to get at the data
in the rest of the table.
> weird behavior across fork boundaries; (b) the additional memory space
> that has to be duplicated into child processes will cost something per
> child launch, even if the child never uses it. But these are only
> arguments that it might not *always* be a prudent thing to do, not that
> we shouldn't give the DBA the tool to do it if he wants. So fire away.
Here is a patch for the above, including a documentation update. It
creates a new GUC variable "preload_libraries", that accepts a list in
the form:
preload_libraries = '$libdir/mylib1:initfunc,$libdir/mylib2'
If ":initfunc" is omitted or not found, no initialization function is
executed, but the library is still preloaded. If "$libdir/mylib" isn't
found, the postmaster refuses to start.
In my testing with PL/R, it reduces the first call to a PL/R function
(after connecting) from almost 2 seconds, down to about 8 ms.
Joe Conway
Adjustable threshold is gone in favor of keeping track of total requested
page storage and doling out proportional fractions to each relation
(with a minimum amount per relation, and some quantization of the results
to avoid thrashing with small changes in page counts). Provide special-
case code for indexes so as not to waste space storing useless page
free space counts. Restructure internal data storage to be a flat array
instead of list-of-chunks; this may cost a little more work in data
copying when reorganizing, but allows binary search to be used during
lookup_fsm_page_entry().
- more work from the SGML police
- some grammar improvements: rewriting a paragraph or two, replacing
contractions where (IMHO) appropriate
- fix missing utility commands in lock mode docs
- improve CLUSTER, REINDEX, SET SESSION AUTHORIZATION ref pages
Neil Conway
expression accepted by the regex operators, per discussion yesterday.
Along the way, reduce deadlock_timeout from PGC_POSTMASTER to PGC_SIGHUP
category. It is probably best to insist that all backends share the same
setting, but that doesn't mean it has to be frozen at startup.
necessarily following the JOIN syntax to develop the query plan. The old
behavior is still available by setting GUC variable JOIN_COLLAPSE_LIMIT
to 1. Also create a GUC variable FROM_COLLAPSE_LIMIT to control the
similar decision about when to collapse sub-SELECT lists into their parent
lists. (This behavior existed already, but the limit was always
GEQO_THRESHOLD/2; now it's separately adjustable.)
>
> I'd suggest that the runtime.sgml description explicitly say "values of
> at least a few thousand are recommended for production installations".
Neil Conway
