Also avoid hardcoding the current default state by giving it the name
"on" and replace with a meaningful name that reflects its behaviour.
Coding only, no change in behaviour.
This means one less thing to configure when setting up synchronous
replication, and also avoids some ambiguity around what the behavior
should be when the settings of these variables conflict.
Fujii Masao, with additional hacking by me.
If a standby is broadcasting reply messages and we have named
one or more standbys in synchronous_standby_names then allow
users who set synchronous_replication to wait for commit, which
then provides strict data integrity guarantees. Design avoids
sending and receiving transaction state information so minimises
bookkeeping overheads. We synchronize with the highest priority
standby that is connected and ready to synchronize. Other standbys
can be defined to takeover in case of standby failure.
This version has very strict behaviour; more relaxed options
may be added at a later date.
Simon Riggs and Fujii Masao, with reviews by Yeb Havinga, Jaime
Casanova, Heikki Linnakangas and Robert Haas, plus the assistance
of many other design reviewers.
Waiting for relation locks can lead to starvation - it pins down an
autovacuum worker for as long as the lock is held. But if we're doing
an anti-wraparound vacuum, then we still wait; maintenance can no longer
be put off.
To assist with troubleshooting, if log_autovacuum_min_duration >= 0,
we log whenever an autovacuum or autoanalyze is skipped for this reason.
Per a gripe by Josh Berkus, and ensuing discussion.
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
When using default autovacuum_vac_cost_limit, autovac_balance_cost relied
on VacuumCostLimit to contain the correct global value ... but after the
first time through in a particular worker process, it didn't, because we'd
trashed it in previous iterations. Depending on the state of other autovac
workers, this could result in a steady reduction of the effective
cost_limit setting as a particular worker processed more and more tables,
causing it to go slower and slower. Spotted by Simon Poole (bug #5759).
Fix by saving and restoring the GUC variables in the loop in do_autovacuum.
In passing, improve a few comments.
Back-patch to 8.3 ... the cost rebalancing code has been buggy since it was
put in.
get_database_list was uselessly allocating its output data, along some
created along the way, in a permanent memory context. This didn't
matter when autovacuum was a single, short-lived process, but now that
the launcher is permanent, it shows up as a permanent leak.
To fix, make get_database list allocate its output data in the caller's
context, which is in charge of freeing it when appropriate; and the
memory leaked by heap_beginscan et al is allocated in a throwaway
transaction context.
rather than returning NULL for some-but-not-all failures as they used to.
Remove now-redundant tests for NULL from call sites.
We had to do something about this because many call sites were failing to
check for NULL; and changing it like this seems a lot more useful and
mistake-proof than adding checks to the call sites without them.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
decisions about when to auto-analyze.
The previous code depended on n_live_tuples + n_dead_tuples - last_anl_tuples,
where all three of these numbers could be bad estimates from ANALYZE itself.
Even worse, in the presence of a steady flow of HOT updates and matching
HOT-tuple reclamations, auto-analyze might never trigger at all, even if all
three numbers are exactly right, because n_dead_tuples could hold steady.
To fix, replace last_anl_tuples with an accurately tracked count of the total
number of committed tuple inserts + updates + deletes since the last ANALYZE
on the table. This can still be compared to the same threshold as before, but
it's much more trustworthy than the old computation. Tracking this requires
one more intra-transaction counter per modified table within backends, but no
additional memory space in the stats collector. There probably isn't any
measurable speed difference; if anything it might be a bit faster than before,
since I was able to eliminate some per-tuple arithmetic operations in favor of
adding sums once per (sub)transaction.
Also, simplify the logic around pgstat vacuum and analyze reporting messages
by not trying to fold VACUUM ANALYZE into a single pgstat message.
The original thought behind this patch was to allow scheduling of analyzes
on parent tables by artificially inflating their changes_since_analyze count.
I've left that for a separate patch since this change seems to stand on its
own merit.
adopted for EXPLAIN. This will allow additional options to be implemented
in future without having to make them fully-reserved keywords. The old syntax
remains available for existing options, however.
Itagaki Takahiro
via the "flat files" facility. This requires making it enough like a backend
to be able to run transactions; it's no longer an "auxiliary process" but
more like the autovacuum worker processes. Also, its signal handling has
to be brought into line with backends/workers. In particular, since it
now has to handle procsignal.c processing, the special autovac-launcher-only
signal conditions are moved to SIGUSR2.
Alvaro, with some cleanup from Tom
In the original coding, setting a single reloption would cause default
values to be used for all the other reloptions. This is a problem
particularly for autovacuum reloptions.
Itagaki Takahiro
This causes problems when the system load is high, per report from Zdenek
Kotala in <1250860954.1239.114.camel@localhost>; instead of calling kill
directly, have the signal handler set a flag which is checked in ServerLoop.
This way, the handler can return before being called again by a subsequent
signal sent from the autovacuum launcher. Also, increase the sleep in the
launcher in this failure path to 1 second.
Backpatch to 8.3, which is when the signalling between autovacuum
launcher/postmaster was introduced.
Also, add a couple of ReleasePostmasterChildSlot calls in error paths; this
part backpatched to 8.4 which is when the child slot stuff was introduced.
To make this work in the base case, pg_database now has a nailed-in-cache
relation descriptor that is initialized using hardwired knowledge in
relcache.c. This means pg_database is added to the set of relations that
need to have a Schema_pg_xxx macro maintained in pg_attribute.h. When this
path is taken, we'll have to do a seqscan of pg_database to find the row
we need.
In the normal case, we are able to do an indexscan to find the database's row
by name. This is made possible by storing a global relcache init file that
describes only the shared catalogs and their indexes (and therefore is usable
by all backends in any database). A new backend loads this cache file,
finds its database OID after an indexscan on pg_database, and then loads
the local relcache init file for that database.
This change should effectively eliminate number of databases as a factor
in backend startup time, even with large numbers of databases. However,
the real reason for doing it is as a first step towards getting rid of
the flat files altogether. There are still several other sub-projects
to be tackled before that can happen.
This patch gets us out from under the Unix limitation of two user-defined
signal types. We already had done something similar for signals directed to
the postmaster process; this adds multiplexing for signals directed to
backends and auxiliary processes (so long as they're connected to shared
memory).
As proof of concept, replace the former usage of SIGUSR1 and SIGUSR2
for backends with use of the multiplexing mechanism. There are still some
hard-wired definitions of SIGUSR1 and SIGUSR2 for other process types,
but getting rid of those doesn't seem interesting at the moment.
Fujii Masao
copies?) to ensure they really don't run proc_exit/shmem_exit callbacks,
as was intended. I broke this behavior recently by installing atexit
callbacks without thinking about the one case where we truly don't want
to run those callback functions. Noted in an example from Dave Page.
temp relations; this is no more expensive than before, now that we have
pg_class.relistemp. Insert tests into bufmgr.c to prevent attempting
to fetch pages from nonlocal temp relations. This provides a low-level
defense against bugs-of-omission allowing temp pages to be loaded into shared
buffers, as in the contrib/pgstattuple problem reported by Stuart Bishop.
While at it, tweak a bunch of places to use new relcache tests (instead of
expensive probes into pg_namespace) to detect local or nonlocal temp tables.
per-table overrides of parameters.
This removes a whole class of problems related to misusing the catalog,
and perhaps more importantly, gives us pg_dump support for the parameters.
Based on a patch by Euler Taveira de Oliveira, heavily reworked by me.
replication patch needs a signal, but we've already used SIGUSR1 and
SIGUSR2 in normal backends. This patch allows reusing SIGUSR1 for that,
and for other purposes too if the need arises.
the visibility map patch that because autovacuum always sets
VacuumStmt->freeze_min_age, visibility map was never used for autovacuum,
only for manually launched vacuums. This patch introduces a new scan_all
field to VacuumStmt, indicating explicitly whether the visibility map
should be used, or the whole relation should be scanned, to advance
relfrozenxid. Anti-wraparound vacuums still need to scan all pages.
allowed different processes to have different addresses for the shmem segment
in quite a long time, but there were still a few places left that used the
old coding convention. Clean them up to reduce confusion and improve the
compiler's ability to detect pointer type mismatches.
Kris Jurka
main tables.
This requires vacuum() to accept processing a toast table standalone, so
there's a user-visible change in that it's now possible (for a superuser) to
execute "VACUUM pg_toast.pg_toast_XXX".
backend. If so, send a LOG message to the postmaster log, and if the table
is beyond the vacuum-for-wraparound horizon, forcibly drop it. Per recent
discussions. Perhaps we ought to back-patch this, but it probably needs
to age a bit in HEAD first.
functions.
Note that because this patch changes FmgrInfo, any external C functions
you might be testing with 8.4 will need to be recompiled.
Patch by Martin Pihlak, some editorialization by me (principally, removing
tracking of getrusage() numbers)
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
This accidentally failed to fail before 8.3, because the context we were
switching back to was long-lived anyway; but it sure looks risky as can be
now. Well spotted by Pavan Deolasee.