Add asprintf(), pg_asprintf(), and psprintf() to simplify string
allocation and composition. Replacement implementations taken from
NetBSD.
Reviewed-by: Álvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Asif Naeem <anaeem.it@gmail.com>
Change the input/output format to {A,B,C}, to match the internal
representation.
Complete the implementations of line_in, line_out, line_recv, line_send.
Remove comments and error messages about the line type not being
implemented. Add regression tests for existing line operators and
functions.
Reviewed-by: rui hua <365507506hua@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Jeevan Chalke <jeevan.chalke@enterprisedb.com>
REFRESH MATERIALIZED VIEW CONCURRENTLY was broken for any matview
containing a column of a type without a default btree operator
class. It also did not produce results consistent with a non-
concurrent REFRESH or a normal view if any column was of a type
which allowed user-visible differences between values which
compared as equal according to the type's default btree opclass.
Concurrent matview refresh was modified to use the new operators
to solve these problems.
Documentation was added for record comparison, both for the
default btree operator class for record, and the newly added
operators. Regression tests now check for proper behavior both
for a matview with a box column and a matview containing a citext
column.
Reviewed by Steve Singer, who suggested some of the doc language.
This option provides more detailed error messages when STRICT is used
and the number of rows returned is not one.
Marko Tiikkaja, reviewed by Ian Lawrence Barwick
Previously, isolationtester would forbid returning tuples in
session-specific teardown (but not global teardown), as well as in
global setup. Allow these places to return tuples, too.
DISCARD ALL will now discard cached sequence information, as well.
Fabrízio de Royes Mello, reviewed by Zoltán Böszörményi, with some
further tweaks by me.
Though @libdir@ almost always matches @abs_builddir@ in this context,
the test could only fail if they differed. Back-patch to 9.1, where the
test was introduced.
Hamid Quddus Akhtar
Previously, arbitray system columns could be mentioned in table
constraints, but they were not correctly checked at runtime, because
the values weren't actually set correctly in the tuple. Since it
seems easy enough to initialize the table OID properly, do that,
and continue allowing that column, but disallow the rest unless and
until someone figures out a way to make them work properly.
No back-patch, because this doesn't seem important enough to take the
risk of destabilizing the back branches. In fact, this will pose a
dump-and-reload hazard for those upgrading from previous versions:
constraints that were accepted before but were not correctly enforced
will now either be enforced correctly or not accepted at all. Either
could result in restore failures, but in practice I think very few
users will notice the difference, since the use case is pretty
marginal anyway and few users will be relying on features that have
not historically worked.
Amit Kapila, reviewed by Rushabh Lathia, with doc changes by me.
The previous coding attempted to activate all the GUC settings specified
in SET clauses, so that the function validator could operate in the GUC
environment expected by the function body. However, this is problematic
when restoring a dump, since the SET clauses might refer to database
objects that don't exist yet. We already have the parameter
check_function_bodies that's meant to prevent forward references in
function definitions from breaking dumps, so let's change CREATE FUNCTION
to not install the SET values if check_function_bodies is off.
Authors of function validators were already advised not to make any
"context sensitive" checks when check_function_bodies is off, if indeed
they're checking anything at all in that mode. But extend the
documentation to point out the GUC issue in particular.
(Note that we still check the SET clauses to some extent; the behavior
with !check_function_bodies is now approximately equivalent to what ALTER
DATABASE/ROLE have been doing for awhile with context-dependent GUCs.)
This problem can be demonstrated in all active branches, so back-patch
all the way.
There's no inherent reason why an aggregate function can't be variadic
(even VARIADIC ANY) if its transition function can handle the case.
Indeed, this patch to add the feature touches none of the planner or
executor, and little of the parser; the main missing stuff was DDL and
pg_dump support.
It is true that variadic aggregates can create the same sort of ambiguity
about parameters versus ORDER BY keys that was complained of when we
(briefly) had both one- and two-argument forms of string_agg(). However,
the policy formed in response to that discussion only said that we'd not
create any built-in aggregates with varying numbers of arguments, not that
we shouldn't allow users to do it. So the logical extension of that is
we can allow users to make variadic aggregates as long as we're wary about
shipping any such in core.
In passing, this patch allows aggregate function arguments to be named, to
the extent of remembering the names in pg_proc and dumping them in pg_dump.
You can't yet call an aggregate using named-parameter notation. That seems
like a likely future extension, but it'll take some work, and it's not what
this patch is really about. Likewise, there's still some work needed to
make window functions handle VARIADIC fully, but I left that for another
day.
initdb forced because of new aggvariadic field in Aggref parse nodes.
It's possible that inlining of SQL functions (or perhaps other changes?)
has exposed typmod information not known at parse time. In such cases,
Vars generated by query_planner might have valid typmod values while the
original grouping columns only have typmod -1. This isn't a semantic
problem since the behavior of grouping only depends on type not typmod,
but it breaks locate_grouping_columns' use of tlist_member to locate the
matching entry in query_planner's result tlist.
We can fix this without an excessive amount of new code or complexity by
relying on the fact that locate_grouping_columns only gets called when
make_subplanTargetList has set need_tlist_eval == false, and that can only
happen if all the grouping columns are simple Vars. Therefore we only need
to search the sub_tlist for a matching Var, and we can reasonably define a
"match" as being a match of the Var identity fields
varno/varattno/varlevelsup. The code still Asserts that vartype matches,
but ignores vartypmod.
Per bug #8393 from Evan Martin. The added regression test case is
basically the same as his example. This has been broken for a very long
time, so back-patch to all supported branches.
In an example such as
SELECT * FROM
i LEFT JOIN LATERAL (SELECT * FROM j WHERE i.n = j.n) j ON true;
it is safe to pull up the LATERAL subquery into its parent, but we must
then treat the "i.n = j.n" clause as a qual clause of the LEFT JOIN. The
previous coding in deconstruct_recurse mistakenly labeled the clause as
"is_pushed_down", resulting in wrong semantics if the clause were applied
at the join node, as per an example submitted awhile ago by Jeremy Evans.
To fix, postpone processing of such clauses until we return back up to
the appropriate recursion depth in deconstruct_recurse.
In addition, tighten the is-safe-to-pull-up checks in is_simple_subquery;
we previously missed the possibility that the LATERAL subquery might itself
contain an outer join that makes lateral references in lower quals unsafe.
A regression test case equivalent to Jeremy's example was already in my
commit of yesterday, but was giving the wrong results because of this
bug. This patch fixes the expected output for that, and also adds a
test case for the second problem.
The planner largely failed to consider the possibility that a
PlaceHolderVar's expression might contain a lateral reference to a Var
coming from somewhere outside the PHV's syntactic scope. We had a previous
report of a problem in this area, which I tried to fix in a quick-hack way
in commit 4da6439bd8, but Antonin Houska
pointed out that there were still some problems, and investigation turned
up other issues. This patch largely reverts that commit in favor of a more
thoroughly thought-through solution. The new theory is that a PHV's
ph_eval_at level cannot be higher than its original syntactic level. If it
contains lateral references, those don't change the ph_eval_at level, but
rather they create a lateral-reference requirement for the ph_eval_at join
relation. The code in joinpath.c needs to handle that.
Another issue is that createplan.c wasn't handling nested PlaceHolderVars
properly.
In passing, push knowledge of lateral-reference checks for join clauses
into join_clause_is_movable_to. This is mainly so that FDWs don't need
to deal with it.
This patch doesn't fix the original join-qual-placement problem reported by
Jeremy Evans (and indeed, one of the new regression test cases shows the
wrong answer because of that). But the PlaceHolderVar problems need to be
fixed before that issue can be addressed, so committing this separately
seems reasonable.
The planner logic that attempted to make a preliminary estimate of the
ph_needed levels for PlaceHolderVars seems to be completely broken by
lateral references. Fortunately, the potential join order optimization
that this code supported seems to be of relatively little value in
practice; so let's just get rid of it rather than trying to fix it.
Getting rid of this allows fairly substantial simplifications in
placeholder.c, too, so planning in such cases should be a bit faster.
Issue noted while pursuing bugs reported by Jeremy Evans and Antonin
Houska, though this doesn't in itself fix either of their reported cases.
What this does do is prevent an Assert crash in the kind of query
illustrated by the added regression test. (I'm not sure that the plan for
that query is stable enough across platforms to be usable as a regression
test output ... but we'll soon find out from the buildfarm.)
Back-patch to 9.3. The problem case can't arise without LATERAL, so
no need to touch older branches.
My tweak of these error messages in commit c359a1b082 contained the
thinko that a query would always have rowMarks set for a query
containing a locking clause. Not so: when declaring a cursor, for
instance, rowMarks isn't set at the point we're checking, so we'd be
dereferencing a NULL pointer.
The fix is to pass the lock strength to the function raising the error,
instead of trying to reverse-engineer it. The result not only is more
robust, but it also seems cleaner overall.
Per report from Robert Haas.
As pointed out by Tom Lane, we can allow other users of the error
handler callbacks to provide their own memory context by adding
the context to use to ErrorData and using that instead of explicitly
using ErrorContext.
This then allows GetErrorContextStack() to be called from inside
exception handlers, so modify plpgsql to take advantage of that and
add an associated regression test for it.
We'd find the same match twice if it was of zero length and not immediately
adjacent to the previous match. replace_text_regexp() got similar cases
right, so adjust this search logic to match that. Note that even though
the regexp_split_to_xxx() functions share this code, they did not display
equivalent misbehavior, because the second match would be considered
degenerate and ignored.
Jeevan Chalke, with some cosmetic changes by me.
Refactoring as part of commit 8ceb245680
had the unintended effect of making REINDEX TABLE and REINDEX DATABASE
no longer validate constraints enforced by the indexes in question;
REINDEX INDEX still did so. Indexes marked invalid remained so, and
constraint violations arising from data corruption went undetected.
Back-patch to 9.0, like the causative commit.
As GetErrorContextStack() borrowed setup and tear-down code from other
places, it was less than clear that it must only be called as a
top-level entry point into the error system and can't be called by an
exception handler (unlike the rest of the error system, which is set up
to be reentrant-safe).
Being called from an exception handler is outside the charter of
GetErrorContextStack(), so add a bit more protection against it,
improve the comments addressing why we have to set up an errordata
stack for this function at all, and add a few more regression tests.
Lack of clarity pointed out by Tom Lane; all bugs are mine.
This adds the ability to get the call stack as a string from within a
PL/PgSQL function, which can be handy for logging to a table, or to
include in a useful message to an end-user.
Pavel Stehule, reviewed by Rushabh Lathia and rather heavily whacked
around by Stephen Frost.
After further thought about implicit coercions appearing in a joinaliasvars
list, I realized that they represent an additional reason why we might need
to reference the join output column directly instead of referencing an
underlying column. Consider SELECT x FROM t1 LEFT JOIN t2 USING (x) where
t1.x is of type date while t2.x is of type timestamptz. The merged output
variable is of type timestamptz, but it won't go to null when t2 does,
therefore neither t1.x nor t2.x is a valid substitute reference.
The code in get_variable() actually gets this case right, since it knows
it shouldn't look through a coercion, but we failed to ensure that the
unqualified output column name would be globally unique. To fix, modify
the code that trawls for a dangerous situation so that it actually scans
through an unnamed join's joinaliasvars list to see if there are any
non-simple-Var entries.
It's possible to drop a column from an input table of a JOIN clause in a
view, if that column is nowhere actually referenced in the view. But it
will still be there in the JOIN clause's joinaliasvars list. We used to
replace such entries with NULL Const nodes, which is handy for generation
of RowExpr expansion of a whole-row reference to the view. The trouble
with that is that it can't be distinguished from the situation after
subquery pull-up of a constant subquery output expression below the JOIN.
Instead, replace such joinaliasvars with null pointers (empty expression
trees), which can't be confused with pulled-up expressions. expandRTE()
still emits the old convention, though, for convenience of RowExpr
generation and to reduce the risk of breaking extension code.
In HEAD and 9.3, this patch also fixes a problem with some new code in
ruleutils.c that was failing to cope with implicitly-casted joinaliasvars
entries, as per recent report from Feike Steenbergen. That oversight was
because of an inadequate description of the data structure in parsenodes.h,
which I've now corrected. There were some pre-existing oversights of the
same ilk elsewhere, which I believe are now all fixed.
Future patches are expected to introduce logical replication that
works by decoding WAL. WAL contains relfilenodes rather than relation
OIDs, so this infrastructure will be needed to find the relation OID
based on WAL contents.
If logical replication does not make it into this release, we probably
should consider reverting this, since it will add some overhead to DDL
operations that create new relations. One additional index insert per
pg_class row is not a large overhead, but it's more than zero.
Another way of meeting the needs of logical replication would be to
the relation OID to WAL, but that would burden DML operations, not
only DDL.
Andres Freund, with some changes by me. Design review, in earlier
versions, by Álvaro Herrera.
An ancient logic error in cfindloop() could cause the regex engine to fail
to find matches that begin later than the start of the string. This
function is only used when the regex pattern contains a back reference,
and so far as we can tell the error is only reachable if the pattern is
non-greedy (i.e. its first quantifier uses the ? modifier). Furthermore,
the actual match must begin after some potential match that satisfies the
DFA but then fails the back-reference's match test.
Reported and fixed by Jeevan Chalke, with cosmetic adjustments by me.
For simple views which are automatically updatable, this patch allows
the user to specify what level of checking should be done on records
being inserted or updated. For 'LOCAL CHECK', new tuples are validated
against the conditionals of the view they are being inserted into, while
for 'CASCADED CHECK' the new tuples are validated against the
conditionals for all views involved (from the top down).
This option is part of the SQL specification.
Dean Rasheed, reviewed by Pavel Stehule
This is more efficient and simpler . It does mean that an untyped NULL
can no longer be used in such cases, which should be mentioned in
Release Notes, but doesn't seem a terrible loss. The workaround is to
cast the NULL to some array type.
Pavel Stehule, reviewed by Jeevan Chalke.
This is SQL-standard with a few extensions, namely support for
subqueries and outer references in clause expressions.
catversion bump due to change in Aggref and WindowFunc.
David Fetter, reviewed by Dean Rasheed.
This allows reads to continue without any blocking while a REFRESH
runs. The new data appears atomically as part of transaction
commit.
Review questioned the Assert that a matview was not a system
relation. This will be addressed separately.
Reviewed by Hitoshi Harada, Robert Haas, Andres Freund.
Merged after review with security patch f3ab5d4.
The code in set_append_rel_pathlist() for building parameterized paths
for append relations (inheritance and UNION ALL combinations) supposed
that the cheapest regular path for a child relation would still be cheapest
when reparameterized. Which might not be the case, particularly if the
added join conditions are expensive to compute, as in a recent example from
Jeff Janes. Fix it to compare child path costs *after* reparameterizing.
We can short-circuit that if the cheapest pre-existing path is already
parameterized correctly, which seems likely to be true often enough to be
worth checking for.
Back-patch to 9.2 where parameterized paths were introduced.
Commit 31a891857a added some tests in
plpgsql.sql that used a function rather unthinkingly named "foo()".
However, rangefuncs.sql has some much older tests that create a function
of that name, and since these test scripts run in parallel, there is a
chance of failures if the timing is just right. Use another name to
avoid that. Per buildfarm (failure seen today on "hamerkop", but
probably it's happened before and not been noticed).
This value, now pg_stat_all_tables.n_mod_since_analyze, was already
tracked and used by autovacuum, but not exposed to the user.
Mark Kirkwood, review by Laurenz Albe
Treat TOAST index just the same as normal one and get the OID
of TOAST index from pg_index but not pg_class.reltoastidxid.
This change allows us to handle multiple TOAST indexes, and
which is required infrastructure for upcoming
REINDEX CONCURRENTLY feature.
Patch by Michael Paquier, reviewed by Andres Freund and me.
The collate.linux.utf8 test covers some of the same territory, but
isn't portable and so probably does not get run often, or on
non-Linux platforms. If this approach turns out to be sufficiently
portable, we may want to look at trimming the redundant tests out
of that file to avoid duplication.
Robins Tharakan, reviewed by Michael Paquier and Fabien Coelho,
with further changes and cleanup by me.
An INSERT into such a view should work just like an INSERT into its base
table, ie the insertion should go directly into that table ... not be
duplicated into each child table, as was happening before, per bug #8275
from Rushabh Lathia. On the other hand, the current behavior for
UPDATE/DELETE seems reasonable: the update/delete traverses the child
tables, or not, depending on whether the view specifies ONLY or not.
Add some regression tests covering this area.
Dean Rasheed
Specifically, permit attaching them to the error in RAISE and retrieving
them from a caught error in GET STACKED DIAGNOSTICS. RAISE enforces
nothing about the content of the fields; for its purposes, they are just
additional string fields. Consequently, clarify in the protocol and
libpq documentation that the usual relationships between error fields,
like a schema name appearing wherever a table name appears, are not
universal. This freedom has other applications; consider a FDW
propagating an error from an RDBMS having no schema support.
Back-patch to 9.3, where core support for the error fields was
introduced. This prevents the confusion of having a release where libpq
exposes the fields and PL/pgSQL does not.
Pavel Stehule, lexical revisions by Noah Misch.
To that end, support tags rather than lengths for external datums.
As an example of how this can be used, add support or "indirect"
tuples which point to some externally allocated memory containing
a toast tuple. Similar infrastructure could be used for other
purposes, including, perhaps, support for alternative compression
algorithms.
Andres Freund, reviewed by Hitoshi Harada and myself
The dependencies on the spi and dummy_seclabel contrib modules were
incomplete, because they did not pick up automatically generated
dependencies on header files. This will manifest itself especially when
switching major versions, where the contrib modules would not be
recompiled to contain the new version number, leading to regression test
failures.
To fix this, use the submake approach already in use elsewhere, so that
the contrib modules are built using their full rules.
This results in a slightly less specific error message when OVER
is used in a context where we don't accept window functions, but
per discussion, it's worth it to get the benefit of not needing
to reserve this keyword any more. This same refactoring will
also let us avoid reserving some other keywords that we expect
to add in upcoming patches (specifically, IGNORE, RESPECT, and
FILTER).
Troels Nielsen, with minor changes by me
In Danish collations, there are letter combinations which sort
higher than 'Z'. A test for values > 'WA' was picking up rows
where the value started with 'AA', causing the test to fail.
Backpatch to 9.2, where the failing test was added.
Per report from Svenne Krap and analysis by Jeff Janes
Per discussion on -hackers. We treat Unicode escapes when unescaping
them similarly to the way we treat them in PostgreSQL string literals.
Escapes in the ASCII range are always accepted, no matter what the
database encoding. Escapes for higher code points are only processed in
UTF8 databases, and attempts to process them in other databases will
result in an error. \u0000 is never unescaped, since it would result in
an impermissible null byte.
When the existing code here was written, it made sense to special-case
RowExprs because that was the only way that we could handle row comparisons
at all. Now that we have record_eq() and arrays of composites, the generic
logic for "scalar" types will in fact work on RowExprs too, so there's no
reason to throw error for combinations of RowExprs and other ways of
forming composite values, nor to ignore the possibility of using a
ScalarArrayOpExpr. But keep using the old logic when comparing two
RowExprs, for consistency with the main transformAExprOp() logic. (This
allows some cases with not-quite-identical rowtypes to succeed, so we might
get push-back if we removed it.) Per bug #8198 from Rafal Rzepecki.
Back-patch to all supported branches, since this works fine as far back as
8.4.
Rafal Rzepecki and Tom Lane
In 9.2, Unicode escape sequences are not analysed at all other than
to make sure that they are in the form \uXXXX. But in 9.3 many of the
new operators and functions try to turn JSON text values into text in
the server encoding, and this includes de-escaping Unicode escape
sequences. This processing had not taken into account the possibility
that this might contain a surrogate pair to designate a character
outside the BMP. That is now handled correctly.
This also enforces correct use of surrogate pairs, something that is not
done by the type's input routines. This fact is noted in the docs.
The planner is aware that it mustn't push down upper-level quals into
subqueries if the quals reference subquery output columns that contain
set-returning functions or volatile functions, or are non-DISTINCT outputs
of a DISTINCT ON subquery. However, it missed making this check when
there were one or more levels of UNION or INTERSECT above the dangerous
expression. This could lead to "set-valued function called in context that
cannot accept a set" errors, as seen in bug #8213 from Eric Soroos, or to
silently wrong answers in the other cases.
To fix, refactor the checks so that we make the column-is-unsafe checks
during subquery_is_pushdown_safe(), which already has to recursively
inspect all arms of a set-operation tree. This makes
qual_is_pushdown_safe() considerably simpler, at the cost that we will
spend some cycles checking output columns that possibly aren't referenced
in any upper qual. But the cases where this code gets executed at all
are already nontrivial queries, so it's unlikely anybody will notice any
slowdown of planning.
This has been broken since commit 05f916e6ad,
which makes the bug over ten years old. A bit surprising nobody noticed it
before now.
euc_* and mule_internal test cases were identical to the ones in
src/test/mb. sql_ascii didn't exist elsewhere, but has been broken since
2001, and doesn't seem very interesting anyway. drop.sql hasn't been used
since 2000, when regress.sh was removed.
Fixes oversight in commit 2ffa740be9.
Per report from Josh Kupershmidt.
I think we've broken this case before, so let's add a regression test
this time.
In a construct like "select plain_function(set_returning_function(...))",
the plain function is applied to each output row of the SRF successively.
If some of the SRF outputs are NULL, and the plain function is strict,
you'd expect to get NULL results for such rows ... but what actually
happened was that such rows were omitted entirely from the result set.
This was due to confusion of this case with what should happen for nested
set-returning functions; a strict SRF is indeed supposed to yield an empty
set for null input. Per bug #8150 from Erwin Brandstetter.
Although this has been broken forever, we're not back-patching because
of the possibility that some apps out there expect the incorrect behavior.
This change should be listed as a possible incompatibility in the 9.3
release notes.
This reverts the code changes in 50c137487c,
which turned out to induce crashes and not completely fix the problem
anyway. That commit only considered single subqueries that were excluded
by constraint-exclusion logic, but actually the problem also exists for
subqueries that are appendrel members (ie part of a UNION ALL list). In
such cases we can't add a dummy subpath to the appendrel's AppendPath list
without defeating the logic that recognizes when an appendrel is completely
excluded. Instead, fix the problem by having setrefs.c scan the rangetable
an extra time looking for subqueries that didn't get into the plan tree.
(This approach depends on the 9.2 change that made set_subquery_pathlist
generate dummy paths for excluded single subqueries, so that the exclusion
behavior is the same for single subqueries and appendrel members.)
Note: it turns out that the appendrel form of the missed-permissions-checks
bug exists as far back as 8.4. However, since the practical effect of that
bug seems pretty minimal, consensus is to not attempt to fix it in the back
branches, at least not yet. Possibly we could back-port this patch once
it's gotten a reasonable amount of testing in HEAD. For the moment I'm
just going to revert the previous patch in 9.2.
What we have implemented is a radix tree (or a radix trie or a patricia
trie), but the docs and code comments incorrectly called it a "suffix tree".
Alexander Korotkov
Previously this state was represented by whether the view's disk file had
zero or nonzero size, which is problematic for numerous reasons, since it's
breaking a fundamental assumption about heap storage. This was done to
allow unlogged matviews to revert to unpopulated status after a crash
despite our lack of any ability to update catalog entries post-crash.
However, this poses enough risk of future problems that it seems better to
not support unlogged matviews until we can find another way. Accordingly,
revert that choice as well as a number of existing kluges forced by it
in favor of creating a pg_class.relispopulated flag column.
The initial implementation of this feature was really unsupportable,
because it's relying on the physical size of an on-disk file to carry the
relation's populated/unpopulated state, which is at least a modularity
violation and could have serious long-term consequences. We could say that
an unlogged matview goes to empty on crash, but not everybody likes that
definition, so let's just remove the feature for 9.3. We can add it back
when we have a less klugy implementation.
I left the grammar and tab-completion support for CREATE UNLOGGED
MATERIALIZED VIEW in place, since it's harmless and allows delivering a
more specific error message about the unsupported feature.
I'm committing this separately to ease identification of what should be
reverted when/if we are able to re-enable the feature.
A view defined as "select <something> where false" had the curious property
that the system wouldn't check whether users had the privileges necessary
to select from it. More generally, permissions checks could be skipped
for tables referenced in sub-selects or views that were proven empty by
constraint exclusion (although some quick testing suggests this seldom
happens in cases of practical interest). This happened because the planner
failed to include rangetable entries for such tables in the finished plan.
This was noticed in connection with erroneous handling of materialized
views, but actually the issue is quite unrelated to matviews. Therefore,
revert commit 200ba1667b in favor of a more
direct test for the real problem.
Back-patch to 9.2 where the bug was introduced (by commit
7741dd6590).
This patch gets rid of the concept of, and infrastructure for,
non-canonical PathKeys; we now only ever create canonical pathkey lists.
The need for non-canonical pathkeys came from the desire to have
grouping_planner initialize query_pathkeys and related pathkey lists before
calling query_planner. However, since query_planner didn't actually *do*
anything with those lists before they'd been made canonical, we can get rid
of the whole mess by just not creating the lists at all until the point
where we formerly canonicalized them.
There are several ways in which we could implement that without making
query_planner itself deal with grouping/sorting features (which are
supposed to be the province of grouping_planner). I chose to add a
callback function to query_planner's API; other alternatives would have
required adding more fields to PlannerInfo, which while not bad in itself
would create an ABI break for planner-related plugins in the 9.2 release
series. This still breaks ABI for anything that calls query_planner
directly, but it seems somewhat unlikely that there are any such plugins.
I had originally conceived of this change as merely a step on the way to
fixing bug #8049 from Teun Hoogendoorn; but it turns out that this fixes
that bug all by itself, as per the added regression test. The reason is
that now get_eclass_for_sort_expr is adding the ORDER BY expression at the
end of EquivalenceClass creation not the start, and so anything that is in
a multi-member EquivalenceClass has already been created with correct
em_nullable_relids. I am suspicious that there are related scenarios in
which we still need to teach get_eclass_for_sort_expr to compute correct
nullable_relids, but am not eager to risk destabilizing either 9.2 or 9.3
to fix bugs that are only hypothetical. So for the moment, do this and
stop here.
Back-patch to 9.2 but not to earlier branches, since they don't exhibit
this bug for lack of join-clause-movement logic that depends on
em_nullable_relids being correct. (We might have to revisit that choice
if any related bugs turn up.) In 9.2, don't change the signature of
make_pathkeys_for_sortclauses nor remove canonicalize_pathkeys, so as
not to risk more plugin breakage than we have to.
ORDER BY expressions were being treated the same as regular aggregate
arguments for purposes of collation determination, but really they should
not affect the aggregate's collation at all; only collations of the
aggregate's regular arguments should affect it.
In many cases this mistake would lead to incorrectly throwing a "collation
conflict" error; but in some cases the corrected code will silently assign
a different collation to the aggregate than before, for example
agg(foo ORDER BY bar COLLATE "x")
which will now use foo's collation rather than "x" for the aggregate.
Given this risk and the lack of field complaints about the issue, it
doesn't seem prudent to back-patch.
In passing, rearrange code in assign_collations_walker so that we don't
need multiple copies of the standard logic for computing collation of a
node with children. (Previously, CaseExpr duplicated the standard logic,
and we would have needed a third copy for Aggref without this change.)
Andrew Gierth and David Fetter
In most cases, these were just references to the SQL standard in
general. In a few cases, a contrast was made between SQL92 and later
standards -- those have been kept unchanged.
Notice and complain about PQcancel() failures. Also, don't dump core if
an error PGresult doesn't contain severity and message subfields, as it
might not if it was generated by libpq itself. (We have a longstanding
TODO item to improve that, but in the meantime isolationtester had better
cope.)
I tripped across the latter item while investigating a trouble report on
buildfarm member spoonbill. As for the former, there's no evidence that
PQcancel failure is actually involved in spoonbill's problem, but it still
seems like a bad idea to ignore an error return code.
The JSON parser is converted into a recursive descent parser, and
exposed for use by other modules such as extensions. The API provides
hooks for all the significant parser event such as the beginning and end
of objects and arrays, and providing functions to handle these hooks
allows for fairly simple construction of a wide variety of JSON
processing functions. A set of new basic processing functions and
operators is also added, which use this API, including operations to
extract array elements, object fields, get the length of arrays and the
set of keys of a field, deconstruct an object into a set of key/value
pairs, and create records from JSON objects and arrays of objects.
Catalog version bumped.
Andrew Dunstan, with some documentation assistance from Merlin Moncure.
This event takes place just before ddl_command_end, and is fired if and
only if at least one object has been dropped by the command. (For
instance, DROP TABLE IF EXISTS of a table that does not in fact exist
will not lead to such a trigger firing). Commands that drop multiple
objects (such as DROP SCHEMA or DROP OWNED BY) will cause a single event
to fire. Some firings might be surprising, such as
ALTER TABLE DROP COLUMN.
The trigger is fired after the drop has taken place, because that has
been deemed the safest design, to avoid exposing possibly-inconsistent
internal state (system catalogs as well as current transaction) to the
user function code. This means that careful tracking of object
identification is required during the object removal phase.
Like other currently existing events, there is support for tag
filtering.
To support the new event, add a new pg_event_trigger_dropped_objects()
set-returning function, which returns a set of rows comprising the
objects affected by the command. This is to be used within the user
function code, and is mostly modelled after the recently introduced
pg_identify_object() function.
Catalog version bumped due to the new function.
Dimitri Fontaine and Álvaro Herrera
Review by Robert Haas, Tom Lane
The statistics-based cost estimation patch for range types broke that, by
incorrectly assuming that the left operand of all range oeprators is a
range. That lead to a "type x is not a range type" error. Because it took so
long for anyone to notice, add a regression test for that case.
We still don't do proper statistics-based cost estimation for that, so you
just get a default constant estimate. We should look into implementing that,
but this patch at least fixes the regression.
Spotted by Tom Lane, when testing query from Josh Berkus.
The buildfarm members using -DCLOBBER_CACHE_ALWAYS still don't like this
test. Some experimentation shows that on my machine, isolationtester's
query to check for "waiting" state takes 2 to 2.5 seconds to bind+execute
under -DCLOBBER_CACHE_ALWAYS. Set the timeouts to 5 seconds to leave some
headroom for possibly-slower buildfarm critters.
Really we ought to fix the "waiting" query, which is not only horridly
slow but outright wrong in detail; and then maybe we can back off these
timeouts. But right now I'm just trying to get the buildfarm green again.
Per report from Hadi Moshayedi of matview regression test failure
with optimization of aggregates. A few ORDER BY clauses improve
code coverage for matviews while solving that problem.
Buildfarm member friarbird doesn't like this test as-committed, evidently
because it's so slow that the test framework doesn't reliably notice that
the backend is waiting before the timeout goes off. (This is not totally
surprising, since friarbird builds with -DCLOBBER_CACHE_ALWAYS.) Increase
the timeout delay from 1 second to 2 in hopes of resolving that problem.
This GUC allows limiting the time spent waiting to acquire any one
heavyweight lock.
In support of this, improve the recently-added timeout infrastructure
to permit efficiently enabling or disabling multiple timeouts at once.
That reduces the performance hit from turning on lock_timeout, though
it's still not zero.
Zoltán Böszörményi, reviewed by Tom Lane,
Stephen Frost, and Hari Babu
This would have caught a bug in the initial patch, and seems like
a good thing to test going forward.
Per bug report by Erik Rijkers and fix by Tom Lane
The planner sometimes inserts Result nodes to perform column projections
(ie, arbitrary scalar calculations) above plan nodes that lack projection
logic of their own. However, we did that even if the lower plan node was
in fact producing the required column set already; which is a pretty common
case given the popularity of "SELECT * FROM ...". Measurements show that
the useless plan node adds non-negligible overhead, especially when there
are many columns in the result. So add a check to avoid inserting a Result
node unless there's something useful for it to do.
There are a couple of remaining places where unnecessary Result nodes
could get inserted, but they are (a) much less performance-critical,
and (b) coded in such a way that it's hard to avoid inserting a Result,
because the desired tlist is changed on-the-fly in subsequent logic.
We'll leave those alone for now.
Kyotaro Horiguchi; reviewed and further hacked on by Amit Kapila and
Tom Lane.
There's still some discussion about exactly how postgres_fdw ought to
handle this case, but there seems no debate that we want to allow defaults
to be used for inserts into foreign tables. So remove the core-code
restrictions that prevented it.
While at it, get rid of the special grammar productions for CREATE FOREIGN
TABLE, and instead add explicit FEATURE_NOT_SUPPORTED error checks for the
disallowed cases. This makes the grammar a shade smaller, and more
importantly results in much more intelligible error messages for
unsupported cases. It's also one less thing to fix if we ever start
supporting constraints on foreign tables.
This adds the following:
json_agg(anyrecord) -> json
to_json(any) -> json
hstore_to_json(hstore) -> json (also used as a cast)
hstore_to_json_loose(hstore) -> json
The last provides heuristic treatment of numbers and booleans.
Also, in json generation, if any non-builtin type has a cast to json,
that function is used instead of the type's output function.
Andrew Dunstan, reviewed by Steve Singer.
Catalog version bumped.
The previous coding of this function could get into situations where it
would never terminate, because successive passes would re-add EMPTY arcs
that had been removed by the previous pass. Rewrite the function
completely using a new algorithm that is guaranteed to terminate, and
also seems to be usually faster than the old one. Per Tcl bugs 3604074
and 3606683.
Tom Lane and Don Porter
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
Also make sure other fields of the view's pg_class entry are appropriate
for a view; it shouldn't have relfrozenxid set for instance.
This ancient omission isn't believed to have any serious consequences in
versions 8.4-9.2, so no backpatch. But let's fix it before it does bite
us in some serious way. It's just luck that the case doesn't cause
problems for autovacuum. (It did cause problems in 8.3, but that's out
of support.)
Andres Freund
Revert commit ab0f7b6089 (in HEAD only)
in favor of the proper solution, which is to declare enum_recv() correctly
in the system catalogs. It should be declared to take type "internal"
not "cstring".
Also improve the type_sanity regression test, which should have caught
this typo, so that it actually would. Most of the relevant checks on
the signature of type I/O functions should not have been restricted to
basetypes/pseudotypes, as they should apply to any type's I/O functions.
While there's considerable doubt that we want fuzzy behavior in the
geometric operators at all (let alone as currently implemented), nobody is
stepping forward to redesign that stuff. In the meantime it behooves us
to make sure that index searches agree with the behavior of the underlying
operators. This patch fixes two problems in this area.
First, gist_box_same was using fuzzy equality, but it really needs to use
exact equality to prevent not-quite-identical upper index keys from being
treated as identical, which for example would prevent an existing upper
key from being extended by an amount less than epsilon. This would result
in inconsistent indexes. (The next release notes will need to recommend
that users reindex GiST indexes on boxes, polygons, circles, and points,
since all four opclasses use gist_box_same.)
Second, gist_point_consistent used exact comparisons for upper-page
comparisons in ~= searches, when it needs to use fuzzy comparisons to
ensure it finds all matches; and it used fuzzy comparisons for point <@ box
searches, when it needs to use exact comparisons because that's what the
<@ operator (rather inconsistently) does.
The added regression test cases illustrate all three misbehaviors.
Back-patch to all active branches. (8.4 did not have GiST point_ops,
but it still seems prudent to apply the gist_box_same patch to it.)
Alexander Korotkov, reviewed by Noah Misch
This patch changes pg_get_viewdef() and allied functions so that
PRETTY_INDENT processing is always enabled. Per discussion, only the
PRETTY_PAREN processing (that is, stripping of "unnecessary" parentheses)
poses any real forward-compatibility risk, so we may as well make dump
output look as nice as we safely can.
Also, set the default wrap length to zero (i.e, wrap after each SELECT
or FROM list item), since there's no very principled argument for the
former default of 80-column wrapping, and most people seem to agree this
way looks better.
Marko Tiikkaja, reviewed by Jeevan Chalke, further hacking by Tom Lane
This is specified in the SQL standard. The CREATE RECURSIVE VIEW
specification is transformed into a normal CREATE VIEW statement with a
WITH RECURSIVE clause.
reviewed by Abhijit Menon-Sen and Stephen Frost
exec_simple_check_plan and exec_eval_simple_expr attempted to call
GetCachedPlan directly. This meant that if an error was thrown during
planning, the resulting context traceback would not include the line
normally contributed by _SPI_error_callback. This is already inconsistent,
but just to be really odd, a re-execution of the very same expression
*would* show the additional context line, because we'd already have cached
the plan and marked the expression as non-simple.
The problem is easy to demonstrate in 9.2 and HEAD because planning of a
cached plan doesn't occur at all until GetCachedPlan is done. In earlier
versions, it could only be an issue if initial planning had succeeded, then
a replan was forced (already somewhat improbable for a simple expression),
and the replan attempt failed. Since the issue is mainly cosmetic in older
branches anyway, it doesn't seem worth the risk of trying to fix it there.
It is worth fixing in 9.2 since the instability of the context printout can
affect the results of GET STACKED DIAGNOSTICS, as per a recent discussion
on pgsql-novice.
To fix, introduce a SPI function that wraps GetCachedPlan while installing
the correct callback function. Use this instead of calling GetCachedPlan
directly from plpgsql.
Also introduce a wrapper function for extracting a SPI plan's
CachedPlanSource list. This lets us stop including spi_priv.h in
pl_exec.c, which was never a very good idea from a modularity standpoint.
In passing, fix a similar inconsistency that could occur in SPI_cursor_open,
which was also calling GetCachedPlan without setting up a context callback.
Such cases should work, but the grammar failed to accept them because of
our ancient precedence hacks to convince bison that extra parentheses
around a sub-SELECT in an expression are unambiguous. (Formally, they
*are* ambiguous, but we don't especially care whether they're treated as
part of the sub-SELECT or part of the expression. Bison cares, though.)
Fix by adding a redundant-looking production for this case.
This is a fine example of why fixing shift/reduce conflicts via
precedence declarations is more dangerous than it looks: you can easily
cause the parser to reject cases that should work.
This has been wrong since commit 3db4056e22
or maybe before, and apparently some people have been working around it
by inserting no-op casts. That method introduces a dump/reload hazard,
as illustrated in bug #7838 from Jan Mate. Hence, back-patch to all
active branches.
The SQL standard does not have general functions-in-FROM, but it does
allow UNNEST() there (see the <collection derived table> production),
and the semantics of that are defined to include lateral references.
So spec compliance requires allowing lateral references within UNNEST()
even without an explicit LATERAL keyword. Rather than making UNNEST()
a special case, it seems best to extend this flexibility to any
function-in-FROM. We'll still allow LATERAL to be written explicitly
for clarity's sake, but it's now a noise word in this context.
In theory this change could result in a change in behavior of existing
queries, by allowing what had been an outer reference in a function-in-FROM
to be captured by an earlier FROM-item at the same level. However, all
pre-9.3 PG releases have a bug that causes them to match variable
references to earlier FROM-items in preference to outer references (and
then throw an error). So no previously-working query could contain the
type of ambiguity that would risk a change of behavior.
Per a suggestion from Andrew Gierth, though I didn't use his patch.
Previously non-honored FREEZE mode was ignored. This also issues an
appropriate error message based on the cause of the failure, per
suggestion from Tom. Additional regression test case added.
In the initial implementation of plan caching, we saved the active
search_path when a plan was first cached, then reinstalled that path
anytime we needed to reparse or replan. The idea of that was to try to
reselect the same referenced objects, in somewhat the same way that views
continue to refer to the same objects in the face of schema or name
changes. Of course, that analogy doesn't bear close inspection, since
holding the search_path fixed doesn't cope with object drops or renames.
Moreover sticking with the old path seems to create more surprises than
it avoids. So instead of doing that, consider that the cached plan depends
on search_path, and force reparse/replan if the active search_path is
different than it was when we last saved the plan.
This gets us fairly close to having "transparency" of plan caching, in the
sense that the cached statement acts the same as if you'd just resubmitted
the original query text for another execution. There are still some corner
cases where this fails though: a new object added in the search path
schema(s) might capture a reference in the query text, but we'd not realize
that and force a reparse. We might try to fix that in the future, but for
the moment it looks too expensive and complicated.
Previously, the VARIADIC labeling was effectively ignored, but now these
functions act as though the array elements had all been given as separate
arguments.
Pavel Stehule
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
Remove duplicate implementations of catalog munging and miscellaneous
privilege checks. Instead rely on already existing data in
objectaddress.c to do the work.
Author: KaiGai Kohei, changes by me
Reviewed by: Robert Haas, Álvaro Herrera, Dimitri Fontaine
When attempting to move an object into the schema in which it already
was, for most objects classes we were correctly complaining about
exactly that ("object is already in schema"); but for some other object
classes, such as functions, we were instead complaining of a name
collision ("object already exists in schema"). The latter is wrong and
misleading, per complaint from Robert Haas in
CA+TgmoZ0+gNf7RDKRc3u5rHXffP=QjqPZKGxb4BsPz65k7qnHQ@mail.gmail.com
To fix, refactor the way these checks are done. As a bonus, the
resulting code is smaller and can also share some code with Rename
cases.
While at it, remove use of getObjectDescriptionOids() in error messages.
These are normally disallowed because of translatability considerations,
but this one had slipped through since 9.1. (Not sure that this is
worth backpatching, though, as it would create some untranslated
messages in back branches.)
This is loosely based on a patch by KaiGai Kohei, heavily reworked by
me.
In commit 11e131854f, we improved the
rule/view dumping code so that it would produce valid query representations
even if some of the tables involved in a query had been renamed since the
query was parsed. This patch extends that idea to fix problems that occur
when individual columns are renamed, or added or dropped. As before, the
core of the fix is to assign unique new aliases when a name conflict has
been created. This is complicated by the JOIN USING feature, which
requires the same column alias to be used in both input relations, but we
can handle that with a sufficiently complex approach to assigning aliases.
A fortiori, this patch takes care of situations where the query didn't have
unique column names to begin with, such as in a recent complaint from Bryan
Nuse. (Because of expansion of "SELECT *", re-parsing a dumped query can
require column name uniqueness even though the original text did not.)
This patch makes "simple" views automatically updatable, without the need
to create either INSTEAD OF triggers or INSTEAD rules. "Simple" views
are those classified as updatable according to SQL-92 rules. The rewriter
transforms INSERT/UPDATE/DELETE commands on such views directly into an
equivalent command on the underlying table, which will generally have
noticeably better performance than is possible with either triggers or
user-written rules. A view that has INSTEAD OF triggers or INSTEAD rules
continues to operate the same as before.
For the moment, security_barrier views are not considered simple.
Also, we do not support WITH CHECK OPTION. These features may be
added in future.
Dean Rasheed, reviewed by Amit Kapila
For some reason lost in the mists of prehistory, RETURN was only coded to
allow a simple reference to a composite variable when the function's return
type is composite. Allow an expression instead, while preserving the
efficiency of the original code path in the case where the expression is
indeed just a composite variable's name. Likewise for RETURN NEXT.
As is true in various other places, the supplied expression must yield
exactly the number and data types of the required columns. There was some
discussion of relaxing that for pl/pgsql, but no consensus yet, so this
patch doesn't address that.
Asif Rehman, reviewed by Pavel Stehule
Allow support only for freezing tuples by explicit
command. Previous coding mistakenly extended
slightly beyond what was agreed as correct on -hackers.
So essentially a partial revoke of earlier work,
leaving just the COPY FREEZE command.
When we do "make install" to create a temp installation, we don't want
that instance of make to try to communicate with any instance of make
that might be calling us. This is known to cause problems if the
upper make has a -jN flag, and in principle could cause problems even
without that. Unset the relevant environment variables to prevent such
issues.
Andres Freund
Normally it is unsafe to allow ALTER TYPE ADD VALUE in a transaction block,
because instances of the value could be added to indexes later in the same
transaction, and then they would still be accessible even if the
transaction rolls back. However, we can allow this if the enum type itself
was created in the current transaction, because then any such indexes would
have to go away entirely on rollback.
The reason for allowing this is to support pg_upgrade's new usage of
pg_restore --single-transaction: in --binary-upgrade mode, pg_dump emits
enum types as a succession of ALTER TYPE ADD VALUE commands so that it can
preserve the values' OIDs. The support is a bit limited, so we'll leave
it undocumented.
Andres Freund
When a relfilenode is created in this subtransaction or
a committed child transaction and it cannot otherwise
be seen by our own process, mark tuples committed ahead
of transaction commit for all COPY commands in same
transaction. If FREEZE specified on COPY
and pre-conditions met then rows will also be frozen.
Both options designed to avoid revisiting rows after commit,
increasing performance of subsequent commands after
data load and upgrade. pg_restore changes later.
Simon Riggs, review comments from Heikki Linnakangas, Noah Misch and design
input from Tom Lane, Robert Haas and Kevin Grittner
In a query such as "SELECT DISTINCT min(x) FROM tab", the DISTINCT is
pretty useless (there being only one output row), but nonetheless it
shouldn't fail. But it could fail if "tab" is an inheritance parent,
because planagg.c's code for fixing up equivalence classes after making the
index-optimized MIN/MAX transformation wasn't prepared to find child-table
versions of the aggregate expression. The least ugly fix seems to be
to add an option to mutate_eclass_expressions() to skip child-table
equivalence class members, which aren't used anymore at this stage of
planning so it's not really necessary to fix them. Since child members
are ignored in many cases already, it seems plausible for
mutate_eclass_expressions() to have an option to ignore them too.
Per bug #7703 from Maxim Boguk.
Back-patch to 9.1. Although the same code exists before that, it cannot
encounter child-table aggregates AFAICS, because the index optimization
transformation cannot succeed on inheritance trees before 9.1 (for lack
of MergeAppend).
Some platforms throw an exception for this division, rather than returning
a necessarily-overflowed result. Since we were testing for overflow after
the fact, an exception isn't nice. We can avoid the problem by treating
division by -1 as negation.
Add some regression tests so that we'll find out if any compilers try to
optimize away the overflow check conditions.
This ought to be back-patched, but I'm going to see what the buildfarm
reports about the regression tests first.
Per discussion with Xi Wang, though this is different from the patch he
submitted.
This case got broken in 8.4 by the addition of an error check that
complains if ALTER TABLE ONLY is used on a table that has children.
We do use ONLY for this situation, but it's okay because the necessary
recursion occurs at a higher level. So we need to have a separate
flag to suppress recursion without making the error check.
Reported and patched by Pavan Deolasee, with some editorial adjustments by
me. Back-patch to 8.4, since this is a regression of functionality that
worked in earlier branches.
I'm not sure why commit 1eb1dde049 seems
to have made this start to fail on Cygwin when it never did before ---
but nonetheless, the coding was pretty bogus, and unlike the way we
handle $(X) anywhere else. Per buildfarm.
This prevents surprising behavior when a FOR EACH ROW trigger
BEFORE UPDATE or BEFORE DELETE directly or indirectly updates or
deletes the the old row. Prior to this patch the requested action
on the row could be silently ignored while all triggered actions
based on the occurence of the requested action could be committed.
One example of how this could happen is if the BEFORE DELETE
trigger for a "parent" row deleted "children" which had trigger
functions to update summary or status data on the parent.
This also prevents similar surprising problems if the query has a
volatile function which updates a target row while it is already
being updated.
There are related issues present in FOR UPDATE cursors and READ
COMMITTED queries which are not handled by this patch. These
issues need further evalution to determine what change, if any, is
needed.
Where the new error messages are generated, in most cases the best
fix will be to move code from the BEFORE trigger to an AFTER
trigger. Where this is not feasible, the trigger can avoid the
error by re-issuing the triggering statement and returning NULL.
Documentation changes will be submitted in a separate patch.
Kevin Grittner and Tom Lane with input from Florian Pflug and
Robert Haas, based on problems encountered during conversion of
Wisconsin Circuit Court trigger logic to plpgsql triggers.
Views should not have any pg_attribute entries for system columns.
However, we forgot to remove such entries when converting a table to a
view. This could lead to crashes later on, if someone attempted to
reference such a column, as reported by Kohei KaiGai.
Patch in HEAD only. This bug has been there forever, but in the back
branches we will have to defend against existing mis-converted views,
so it doesn't seem worthwhile to change the conversion code too.
If a potential equivalence clause references a variable from the nullable
side of an outer join, the planner needs to take care that derived clauses
are not pushed to below the outer join; else they may use the wrong value
for the variable. (The problem arises only with non-strict clauses, since
if an upper clause can be proven strict then the outer join will get
simplified to a plain join.) The planner attempted to prevent this type
of error by checking that potential equivalence clauses aren't
outerjoin-delayed as a whole, but actually we have to check each side
separately, since the two sides of the clause will get moved around
separately if it's treated as an equivalence. Bugs of this type can be
demonstrated as far back as 7.4, even though releases before 8.3 had only
a very ad-hoc notion of equivalence clauses.
In addition, we neglected to account for the possibility that such clauses
might have nonempty nullable_relids even when not outerjoin-delayed; so the
equivalence-class machinery lacked logic to compute correct nullable_relids
values for clauses it constructs. This oversight was harmless before 9.2
because we were only using RestrictInfo.nullable_relids for OR clauses;
but as of 9.2 it could result in pushing constructed equivalence clauses
to incorrect places. (This accounts for bug #7604 from Bill MacArthur.)
Fix the first problem by adding a new test check_equivalence_delay() in
distribute_qual_to_rels, and fix the second one by adding code in
equivclass.c and called functions to set correct nullable_relids for
generated clauses. Although I believe the second part of this is not
currently necessary before 9.2, I chose to back-patch it anyway, partly to
keep the logic similar across branches and partly because it seems possible
we might find other reasons why we need valid values of nullable_relids in
the older branches.
Add regression tests illustrating these problems. In 9.0 and up, also
add test cases checking that we can push constants through outer joins,
since we've broken that optimization before and I nearly broke it again
with an overly simplistic patch for this problem.
... because the latter plays games with the privileges for language SQL.
It looks like running alter_generic in parallel with "misc" is OK though.
Also, adjust serial_schedule to maintain the same test ordering (up to
parallelism) as parallel_schedule.
In commit 11e131854f, I missed the case of
a CTE RTE that doesn't have a user-defined alias, but does have an
alias assigned by set_rtable_names(). Per report from Peter Eisentraut.
While at it, refactor slightly to reduce code duplication.
When hashing a subplan like "WHERE (a, b) NOT IN (SELECT x, y FROM ...)",
findPartialMatch() attempted to match rows using the hashtable's internal
equality operators, which of course are for x and y's datatypes. What we
need to use are the potentially cross-type operators for a=x, b=y, etc.
Failure to do that leads to wrong answers or even crashes. The scope for
problems is limited to cases where we have different types with compatible
hash functions (else we'd not be using a hashed subplan), but for example
int4 vs int8 can cause the problem.
Per bug #7597 from Bo Jensen. This has been wrong since the hashed-subplan
code was written, so patch all the way back.
Numerous flex and bison make rules have appeared in the source tree
over time, and they are all virtually identical, so we can replace
them by pattern rules with some variables for customization.
Users of pgxs will also be able to benefit from this.
Fix broken-on-bigendian-machines byte-swapping functions, add missed update
of alternate regression expected file, improve error reporting, remove some
unnecessary code, sync testlo64.c with current testlo.c (it seems to have
been cloned from a very old copy of that), assorted cosmetic improvements.
4TB large objects (standard 8KB BLCKSZ case). For this purpose new
libpq API lo_lseek64, lo_tell64 and lo_truncate64 are added. Also
corresponding new backend functions lo_lseek64, lo_tell64 and
lo_truncate64 are added. inv_api.c is changed to handle 64-bit
offsets.
Patch contributed by Nozomi Anzai (backend side) and Yugo Nagata
(frontend side, docs, regression tests and example program). Reviewed
by Kohei Kaigai. Committed by Tatsuo Ishii with minor editings.
The previous coding of the YYLLOC_DEFAULT macro behaved strangely for empty
productions, assigning the previous nonterminal's location as the parse
location of the result. The usefulness of that was (at best) debatable
already, but the real problem is that in list-generating nonterminals like
OptFooList: /* EMPTY */ { ... } | OptFooList Foo { ... } ;
the initially-identified location would get copied up, so that even a
nonempty list would be given a bogus parse location. Document how to work
around that, and do so for OptSchemaEltList, so that the error condition
just added for CREATE SCHEMA IF NOT EXISTS produces a sane error cursor.
So far as I can tell, there are currently no other cases where the
situation arises, so we don't need other instances of this coding yet.
Per discussion, schema-element subcommands are not allowed together with
this option, since it's not very obvious what should happen to the element
objects.
Fabrízio de Royes Mello
The error messages they generate are not portable enough.
Also, since the only point of the alter_generic_1 expected file was to
cover platforms with no collation support, it's now useless, so remove
it.
The original only expected file failed to consider machines without
non-default collation support. Per buildfarm.
Also, move the test to another parallel group; the one it was originally
put in is already full according to comments in the schedule file. Per
note from Tom Lane.
Produce a NOTICE when the label already exists, for consistency with other
CREATE IF NOT EXISTS commands. Also, fix the code so it produces something
more user-friendly than an index violation when the label already exists.
This not incidentally enables making a regression test that the previous
patch didn't make for fear of exposing an unpredictable OID in the results.
Also some wordsmithing on the documentation.
If the label is already in the enum the statement becomes a no-op.
This will reduce the pain that comes from our not allowing this
operation inside a transaction block.
Andrew Dunstan, reviewed by Tom Lane and Magnus Hagander.
The previous scheme had bugs in some corner cases involving tables that had
been renamed since a view was made. This could result in dumped views that
failed to reload or reloaded incorrectly, as seen in bug #7553 from Lloyd
Albin, as well as in some pgsql-hackers discussion back in January. Also,
its behavior for printing EXPLAIN plans was sometimes confusing because of
willingness to use the same alias for multiple RTEs (it was Ashutosh
Bapat's complaint about that aspect that started the January thread).
To fix, ensure that each RTE in the query has a unique unqualified alias,
by modifying the alias if necessary (we add "_" and digits as needed to
create a non-conflicting name). Then we can just print its variables with
that alias, avoiding the confusing and bug-prone scheme of sometimes
schema-qualifying variable names. In EXPLAIN, it proves to be expedient to
take the further step of only assigning such aliases to RTEs that are
actually referenced in the query, since the planner has a habit of
generating extra RTEs with the same alias in situations such as
inheritance-tree expansion.
Although this fixes a bug of very long standing, I'm hesitant to back-patch
such a noticeable behavioral change. My experiments while creating a
regression test convinced me that actually incorrect output (as opposed to
confusing output) occurs only in very narrow cases, which is backed up by
the lack of previous complaints from the field. So we may be better off
living with it in released branches; and in any case it'd be smart to let
this ripen awhile in HEAD before we consider back-patching it.
In commit 9e8da0f757, I improved btree
to handle ScalarArrayOpExpr quals natively, so that constructs like
"indexedcol IN (list)" could be supported by index-only scans. Using
such a qual results in multiple scans of the index, under-the-hood.
I went to some lengths to ensure that this still produces rows in index
order ... but I failed to recognize that if a higher-order index column
is lacking an equality constraint, rescans can produce out-of-order
data from that column. Tweak the planner to not expect sorted output
in that case. Per trouble report from Robert McGehee.
Some experimentation with examples similar to bug #7539 has convinced me
that indxpath.c's original implementation of parameterized-path generation
was several bricks shy of a load. In general, if we are relying on a
particular outer rel or set of outer rels for a parameterized path, the
path should use every indexable join clause that's available from that rel
or rels. Any join clauses that get left out of the indexqual will end up
getting applied as plain filter quals (qpquals), and that's generally a
significant loser compared to having the index AM enforce them. (This is
particularly true with btree, which can skip the index scan entirely if
it can see that the given indexquals are mutually contradictory.) The
original heuristics failed to ensure this, though, and were overly
complicated anyway. Rewrite to make the code explicitly identify each
useful set of outer rels and then select all applicable join clauses for
each one. The one plan that changes in the regression tests is in fact
for the better according to the planner's cost estimates.
(Note: this is not a correctness issue but just a matter of plan quality.
I don't yet know what is going on in bug #7539, but I don't expect this
change to fix that.)
Looks like the correct size of DOS-ified tenk.data is 680800 not 680801.
(I got the latter from a version of unix2dos that appends a trailing ^Z,
which evidently is not git's practice.)
The idea here is to provide a more easily diagnosable failure diff when
the problem is that tenk.data has been DOS-ified, as I believe to be
happening currently on buildfarm member hamerkop. Per suggestion from
Magnus Hagander.
Also, sync output/largeobject_1.source with current regression test.
Failure to do that in commit 3a0e4d36eb
turns out to be the real reason that hamerkop has been complaining.
In commit 1bc16a9460 I added a minor
optimization to drop the component variables of a GROUP BY expression from
the target list computed at the aggregation level of a query, if those Vars
weren't referenced elsewhere in the tlist. However, I overlooked that the
window-function planning code would deconstruct such expressions and thus
need to have access to their component variables. Fix it to not do that.
While at it, I removed the distinction between volatile and nonvolatile
window partition/order expressions: the code now computes all of them
at the aggregation level. This saves a relatively expensive check for
volatility, and it's unclear that the resulting plan isn't better anyway.
Per bug #7535 from Louis-David Mitterrand. Back-patch to 9.2.
The planner previously assumed that parameter Vars having the same absolute
query level, varno, and varattno could safely be assigned the same runtime
PARAM_EXEC slot, even though they might be different Vars appearing in
different subqueries. This was (probably) safe before the introduction of
CTEs, but the lazy-evalution mechanism used for CTEs means that a CTE can
be executed during execution of some other subquery, causing the lifespan
of Params at the same syntactic nesting level as the CTE to overlap with
use of the same slots inside the CTE. In 9.1 we created additional hazards
by using the same parameter-assignment technology for nestloop inner scan
parameters, but it was broken before that, as illustrated by the added
regression test.
To fix, restructure the planner's management of PlannerParamItems so that
items having different semantic lifespans are kept rigorously separated.
This will probably result in complex queries using more runtime PARAM_EXEC
slots than before, but the slots are cheap enough that this hardly matters.
Also, stop generating PlannerParamItems containing Params for subquery
outputs: all we really need to do is reserve the PARAM_EXEC slot number,
and that now only takes incrementing a counter. The planning code is
simpler and probably faster than before, as well as being more correct.
Per report from Vik Reykja.
These changes will mostly also need to be made in the back branches, but
I'm going to hold off on that until after 9.2.0 wraps.
Serializable Snapshot Isolation used for serializable transactions
depends on acquiring SIRead locks on all heap relation tuples which
are used to generate the query result, so that a later delete or
update of any of the tuples can flag a read-write conflict between
transactions. This is normally handled in heapam.c, with tuple level
locking. Since an index-only scan avoids heap access in many cases,
building the result from the index tuple, the necessary predicate
locks were not being acquired for all tuples in an index-only scan.
To prevent problems with tuple IDs which are vacuumed and re-used
while the transaction still matters, the xmin of the tuple is part of
the tag for the tuple lock. Since xmin is not available to the
index-only scan for result rows generated from the index tuples, it
is not possible to acquire a tuple-level predicate lock in such
cases, in spite of having the tid. If we went to the heap to get the
xmin value, it would no longer be an index-only scan. Rather than
prohibit index-only scans under serializable transaction isolation,
we acquire an SIRead lock on the page containing the tuple, when it
was not necessary to visit the heap for other reasons.
Backpatch to 9.2.
Kevin Grittner and Tom Lane
Each setup block is run as a single PQexec submission, and some
statements such as VACUUM cannot be combined with others in such a
block.
Backpatch to 9.2.
Kevin Grittner and Tom Lane
We can detect whether the planner top level is going to care at all about
cheap startup cost (it will only do so if query_planner's tuple_fraction
argument is greater than zero). If it isn't, we might as well discard
paths immediately whose only advantage over others is cheap startup cost.
This turns out to get rid of quite a lot of paths in complex queries ---
I saw planner runtime reduction of more than a third on one large query.
Since add_path isn't currently passed the PlannerInfo "root", the easiest
way to tell it whether to do this was to add a bool flag to RelOptInfo.
That's a bit redundant, since all relations in a given query level will
have the same setting. But in the future it's possible that we'd refine
the control decision to work on a per-relation basis, so this seems like
a good arrangement anyway.
Per my suggestion of a few months ago.
If a PlaceHolderVar contains a pulled-up LATERAL reference, its minimum
possible evaluation level might be higher in the join tree than its
original syntactic location. That in turn affects the ph_needed level for
any contained PlaceHolderVars (that is, those PHVs had better propagate up
the join tree at least to the evaluation level of the outer PHV). We got
this mostly right, but mark_placeholder_maybe_needed() failed to account
for the effect, and in consequence could leave the inner PHVs with
ph_may_need less than what their ultimate ph_needed value will be. That's
bad because it could lead to failure to select a join order that will allow
evaluation of the inner PHV at a valid location. Fix that, and add an
Assert that checks that we don't ever set ph_needed to more than
ph_may_need.
push_child_plan/pop_child_plan didn't bother to adjust the "ancestors"
list of parent plan nodes when descending to a child plan node. I think
this was okay when it was written, but it's not okay in the presence of
LATERAL references, since a subplan node could easily be returning a
LATERAL value back up to the same nestloop node that provides the value.
Per changed regression test results, the omission led to failure to
interpret Param nodes that have perfectly good interpretations.
In the initial cut at LATERAL, I kept the rule that cheapest_total_path
was always unparameterized, which meant it had to be NULL if the relation
has no unparameterized paths. It turns out to work much more nicely if
we always have *some* path nominated as cheapest-total for each relation.
In particular, let's still say it's the cheapest unparameterized path if
there is one; if not, take the cheapest-total-cost path among those of
the minimum available parameterization. (The first rule is actually
a special case of the second.)
This allows reversion of some temporary lobotomizations I'd put in place.
In particular, the planner can now consider hash and merge joins for
joins below a parameter-supplying nestloop, even if there aren't any
unparameterized paths available. This should bring planning of
LATERAL-containing queries to the same level as queries not using that
feature.
Along the way, simplify management of parameterized paths in add_path()
and friends. In the original coding for parameterized paths in 9.2,
I tried to minimize the logic changes in add_path(), so it just treated
parameterization as yet another dimension of comparison for paths.
We later made it ignore pathkeys (sort ordering) of parameterized paths,
on the grounds that ordering isn't a useful property for the path on the
inside of a nestloop, so we might as well get rid of useless parameterized
paths as quickly as possible. But we didn't take that reasoning as far as
we should have. Startup cost isn't a useful property inside a nestloop
either, so add_path() ought to discount startup cost of parameterized paths
as well. Having done that, the secondary sorting I'd implemented (in
add_parameterized_path) is no longer needed --- any parameterized path that
survives add_path() at all is worth considering at higher levels. So this
should be a bit faster as well as simpler.
This threw ERROR, not the expected NOTICE, if the index didn't exist.
The bug was actually visible in not-as-expected regression test output,
so somebody wasn't paying too close attention in commit
8cb53654db.
Per report from Brendan Byrd.
This patch takes care of a number of problems having to do with failure
to choose valid join orders and incorrect handling of lateral references
pulled up from subqueries. Notable changes:
* Add a LateralJoinInfo data structure similar to SpecialJoinInfo, to
represent join ordering constraints created by lateral references.
(I first considered extending the SpecialJoinInfo structure, but the
semantics are different enough that a separate data structure seems
better.) Extend join_is_legal() and related functions to prevent trying
to form unworkable joins, and to ensure that we will consider joins that
satisfy lateral references even if the joins would be clauseless.
* Fill in the infrastructure needed for the last few types of relation scan
paths to support parameterization. We'd have wanted this eventually
anyway, but it is necessary now because a relation that gets pulled up out
of a UNION ALL subquery may acquire a reltargetlist containing lateral
references, meaning that its paths *have* to be parameterized whether or
not we have any code that can push join quals down into the scan.
* Compute data about lateral references early in query_planner(), and save
in RelOptInfo nodes, to avoid repetitive calculations later.
* Assorted corner-case bug fixes.
There's probably still some bugs left, but this is a lot closer to being
real than it was before.
If we revoke a grant option from some role X, but X still holds the option
via another grant, we should not recursively revoke the privilege from
role(s) Y that X had granted it to. This was supposedly fixed as one
aspect of commit 4b2dafcc0b, but I must not
have tested it, because in fact that code never worked: it forgot to shift
the grant-option bits back over when masking the bits being revoked.
Per bug #6728 from Daniel German. Back-patch to all active branches,
since this has been wrong since 8.0.
Formerly, subquery pullup had no need to examine other entries in the range
table, since they could not contain any references to the subquery being
pulled up. That's no longer true with LATERAL, so now we need to be able
to visit rangetable subexpressions to replace Vars referencing the
pulled-up subquery. Also, this means that extract_lateral_references must
be unsurprised at encountering lateral PlaceHolderVars, since such might be
created when pulling up a subquery that's underneath an outer join with
respect to the lateral reference.
In the initial cut at the "parameterized paths" feature, I'd simplified
create_index_paths() to the point where it would only generate a single
parameterized bitmap path per relation. Experimentation with an example
supplied by Josh Berkus convinces me that that's not good enough: we really
need to consider a bitmap path for each possible outer relation. Otherwise
we have regressions relative to pre-9.2 versions, in which the planner
picks a plain indexscan where it should have used a bitmap scan in queries
involving three or more tables. Indeed, after fixing this, several queries
in the regression tests show improved plans as a result of using bitmap not
plain indexscans.
The implementation is a quad-tree, largely copied from the quad-tree
implementation for points. The lower and upper bound of ranges are the 2d
coordinates, with some extra code to handle empty ranges.
I left out the support for adjacent operator, -|-, from the original patch.
Not because there was necessarily anything wrong with it, but it was more
complicated than the other operators, and I only have limited time for
reviewing. That will follow as a separate patch.
Alexander Korotkov, reviewed by Jeff Davis and me.
The previous coding essentially assumed that nodes would be rescanned in
the same order they were initialized in; or at least that the "leader" of
a group of CTEscans would be rescanned before any others were required to
execute. Unfortunately, that isn't even a little bit true. It's possible
to devise queries in which the leader isn't rescanned until other CTEscans
on the same CTE have run to completion, or even in which the leader never
gets a rescan call at all.
The fix makes the leader specially responsible only for initial creation
and final destruction of the tuplestore; rescan resets are now a
symmetrically shared responsibility. This means that we might reset the
tuplestore multiple times when restarting a plan subtree containing
multiple CTEscans; but resetting an already-empty tuplestore is cheap
enough that that doesn't seem like a problem.
Per report from Adam Mackler; the new regression test cases are based on
his example query.
Back-patch to 8.4 where CTE scans were introduced.
xml_parse() would attempt to fetch external files or URLs as needed to
resolve DTD and entity references in an XML value, thus allowing
unprivileged database users to attempt to fetch data with the privileges
of the database server. While the external data wouldn't get returned
directly to the user, portions of it could be exposed in error messages
if the data didn't parse as valid XML; and in any case the mere ability
to check existence of a file might be useful to an attacker.
The ideal solution to this would still allow fetching of references that
are listed in the host system's XML catalogs, so that documents can be
validated according to installed DTDs. However, doing that with the
available libxml2 APIs appears complex and error-prone, so we're not going
to risk it in a security patch that necessarily hasn't gotten wide review.
So this patch merely shuts off all access, causing any external fetch to
silently expand to an empty string. A future patch may improve this.
In HEAD and 9.2, also suppress warnings about undefined entities, which
would otherwise occur as a result of not loading referenced DTDs. Previous
branches don't show such warnings anyway, due to different error handling
arrangements.
Credit to Noah Misch for first reporting the problem, and for much work
towards a solution, though this simplistic approach was not his preference.
Also thanks to Daniel Veillard for consultation.
Security: CVE-2012-3489
Re-allow subquery pullup for LATERAL subqueries, except when the subquery
is below an outer join and contains lateral references to relations outside
that outer join. If we pull up in such a case, we risk introducing lateral
cross-references into outer joins' ON quals, which is something the code is
entirely unprepared to cope with right now; and I'm not sure it'll ever be
worth coping with.
Support lateral refs in VALUES (this seems to be the only additional path
type that needs such support as a consequence of re-allowing subquery
pullup).
Put in a slightly hacky fix for joinpath.c's refusal to consider
parameterized join paths even when there cannot be any unparameterized
ones. This was causing "could not devise a query plan for the given query"
failures in queries involving more than two FROM items.
Put in an even more hacky fix for distribute_qual_to_rels() being unhappy
with join quals that contain references to rels outside their syntactic
scope; which is to say, disable that test altogether. Need to think about
how to preserve some sort of debugging cross-check here, while not
expending more cycles than befits a debugging cross-check.
The LATERAL marking has to be propagated down to the UNION leaf queries
when we pull them up. Also, fix the formerly stubbed-off
set_append_rel_pathlist(). It does already have enough smarts to cope with
making a parameterized Append path at need; it just has to not assume that
there *must* be an unparameterized path.
Formerly we relied on checking after-the-fact to see if an expression
contained aggregates, window functions, or sub-selects when it shouldn't.
This is grotty, easily forgotten (indeed, we had forgotten to teach
DefineIndex about rejecting window functions), and none too efficient
since it requires extra traversals of the parse tree. To improve matters,
define an enum type that classifies all SQL sub-expressions, store it in
ParseState to show what kind of expression we are currently parsing, and
make transformAggregateCall, transformWindowFuncCall, and transformSubLink
check the expression type and throw error if the type indicates the
construct is disallowed. This allows removal of a large number of ad-hoc
checks scattered around the code base. The enum type is sufficiently
fine-grained that we can still produce error messages of at least the
same specificity as before.
Bringing these error checks together revealed that we'd been none too
consistent about phrasing of the error messages, so standardize the wording
a bit.
Also, rewrite checking of aggregate arguments so that it requires only one
traversal of the arguments, rather than up to three as before.
In passing, clean up some more comments left over from add_missing_from
support, and annotate some tests that I think are dead code now that that's
gone. (I didn't risk actually removing said dead code, though.)
This patch implements the standard syntax of LATERAL attached to a
sub-SELECT in FROM, and also allows LATERAL attached to a function in FROM,
since set-returning function calls are expected to be one of the principal
use-cases.
The main change here is a rewrite of the mechanism for keeping track of
which relations are visible for column references while the FROM clause is
being scanned. The parser "namespace" lists are no longer lists of bare
RTEs, but are lists of ParseNamespaceItem structs, which carry an RTE
pointer as well as some visibility-controlling flags. Aside from
supporting LATERAL correctly, this lets us get rid of the ancient hacks
that required rechecking subqueries and JOIN/ON and function-in-FROM
expressions for invalid references after they were initially parsed.
Invalid column references are now always correctly detected on sight.
In passing, remove assorted parser error checks that are now dead code by
virtue of our having gotten rid of add_missing_from, as well as some
comments that are obsolete for the same reason. (It was mainly
add_missing_from that caused so much fudging here in the first place.)
The planner support for this feature is very minimal, and will be improved
in future patches. It works well enough for testing purposes, though.
catversion bump forced due to new field in RangeTblEntry.
century specifications just like positive/AD centuries. Previously the
behavior was either wrong or inconsistent with positive/AD handling.
Centuries without years now always assume the first year of the century,
which is now documented.
DecodeInterval() failed to honor the "range" parameter (the special SQL
syntax for indicating which fields appear in the literal string) if the
time was signed. This seems inappropriate, so make it work like the
not-signed case. The inconsistency was introduced in my commit
f867339c01, which as noted in its log message
was only really focused on making SQL-compliant literals work per spec.
Including a sign here is not per spec, but if we're going to allow it
then it's reasonable to expect it to work like the not-signed case.
Also, remove bogus setting of tmask, which caused subsequent processing to
think that what had been given was a timezone and not an hh:mm(:ss) field,
thus confusing checks for redundant fields. This seems to be an aboriginal
mistake in Lockhart's commit 2cf1642461.
Add regression test cases to illustrate the changed behaviors.
Back-patch as far as 8.4, where support for spec-compliant interval
literals was added.
Range problem reported and diagnosed by Amit Kapila, tmask problem by me.
Parse analysis neglected to cover the case of a WITH clause attached to an
intermediate-level set operation; it only handled WITH at the top level
or WITH attached to a leaf-level SELECT. Per report from Adam Mackler.
In HEAD, I rearranged the order of SelectStmt's fields to put withClause
with the other fields that can appear on non-leaf SelectStmts. In back
branches, leave it alone to avoid a possible ABI break for third-party
code.
Back-patch to 8.4 where WITH support was added.
If a crash occurred immediately after the first nextval() call for a serial
column, WAL replay would restore the sequence to a state in which it
appeared that no nextval() had been done, thus allowing the first sequence
value to be returned again by the next nextval() call; as reported in
bug #6748 from Xiangming Mei.
More generally, the problem would occur if an ALTER SEQUENCE was executed
on a freshly created or reset sequence. (The manifestation with serial
columns was introduced in 8.2 when we added an ALTER SEQUENCE OWNED BY step
to serial column creation.) The cause is that sequence creation attempted
to save one WAL entry by writing out a WAL record that made it appear that
the first nextval() had already happened (viz, with is_called = true),
while marking the sequence's in-database state with log_cnt = 1 to show
that the first nextval() need not emit a WAL record. However, ALTER
SEQUENCE would emit a new WAL entry reflecting the actual in-database state
(with is_called = false). Then, nextval would allocate the first sequence
value and set is_called = true, but it would trust the log_cnt value and
not emit any WAL record. A crash at this point would thus restore the
sequence to its post-ALTER state, causing the next nextval() call to return
the first sequence value again.
To fix, get rid of the idea of logging an is_called status different from
reality. This means that the first nextval-driven WAL record will happen
at the first nextval call not the second, but the marginal cost of that is
pretty negligible. In addition, make sure that ALTER SEQUENCE resets
log_cnt to zero in any case where it touches sequence parameters that
affect future nextval results. This will result in some user-visible
changes in the contents of a sequence's log_cnt column, as reflected in the
patch's regression test changes; but no application should be depending on
that anyway, since it was already true that log_cnt changes rather
unpredictably depending on checkpoint timing.
In addition, make some basically-cosmetic improvements to get rid of
sequence.c's undesirable intimacy with page layout details. It was always
really trying to WAL-log the contents of the sequence tuple, so we should
have it do that directly using a HeapTuple's t_data and t_len, rather than
backing into it with some magic assumptions about where the tuple would be
on the sequence's page.
Back-patch to all supported branches.
The initially implemented syntax, "CHECK NO INHERIT (expr)" was not
deemed very good, so switch to "CHECK (expr) NO INHERIT" instead. This
way it looks similar to SQL-standards compliant constraint attribute.
Backport to 9.2 where the new syntax and feature was introduced.
Per discussion.
Commit f5bcd398ad introduced a test using
a table named "circles" in inherit.sql. Unfortunately, the concurrently
executed constraints test was already using that table name, so the
parallel regression tests would sometimes fail. Rename table to dodge
the problem. Per buildfarm.
We left this out of commit b966dd6c42
so as to get some more buildfarm testing of the new fsync code in initdb.
But since no problems have turned up, it's probably time to save the
cycles.
There is no point in running this test when prepared transactions are disabled,
which is the default. New make targets that include the test are provided. This
will save some useless waste of cycles on buildfarm machines.
Backpatch to 9.1 where these tests were introduced.
The code was setting it true for other constraints, which is
bogus. Doing so caused bogus catalog entries for such constraints, and
in particular caused an error to be raised when trying to drop a
constraint of types other than CHECK from a table that has children,
such as reported in bug #6712.
In 9.2, additionally ignore connoinherit=true for other constraint
types, to avoid having to force initdb; existing databases might already
contain bogus catalog entries.
Includes a catversion bump (in HEAD only).
Bug report from Miroslav Šulc
Analysis from Amit Kapila and Noah Misch; Amit also contributed the patch.
When a whole-row Var is reading the result of a subquery, we need it to
ignore any "resjunk" columns that the subquery might have evaluated for
GROUP BY or ORDER BY purposes. We've hacked this area before, in commit
68e40998d0, but that fix only covered
whole-row Vars of named composite types, not those of RECORD type; and it
was mighty klugy anyway, since it just assumed without checking that any
extra columns in the result must be resjunk. A proper fix requires getting
hold of the subquery's targetlist so we can actually see which columns are
resjunk (whereupon we can use a JunkFilter to get rid of them). So bite
the bullet and add some infrastructure to make that possible.
Per report from Andrew Dunstan and additional testing by Merlin Moncure.
Back-patch to all supported branches. In 8.3, also back-patch commit
292176a118, which for some reason I had
not done at the time, but it's a prerequisite for this change.
Commit 3855968f32 added syntax, pg_dump,
psql support, and documentation, but the triggers didn't actually fire.
With this commit, they now do. This is still a pretty basic facility
overall because event triggers do not get a whole lot of information
about what the user is trying to do unless you write them in C; and
there's still no option to fire them anywhere except at the very
beginning of the execution sequence, but it's better than nothing,
and a good building block for future work.
Along the way, add a regression test for ALTER LARGE OBJECT, since
testing of event triggers reveals that we haven't got one.
Dimitri Fontaine and Robert Haas
They don't actually do anything yet; that will get fixed in a
follow-on commit. But this gets the basic infrastructure in place,
including CREATE/ALTER/DROP EVENT TRIGGER; support for COMMENT,
SECURITY LABEL, and ALTER EXTENSION .. ADD/DROP EVENT TRIGGER;
pg_dump and psql support; and documentation for the anticipated
initial feature set.
Dimitri Fontaine, with review and a bunch of additional hacking by me.
Thom Brown extensively reviewed earlier versions of this patch set,
but there's not a whole lot of that code left in this commit, as it
turns out.
These functions support removing or replacing array element value(s)
matching a given search value. Although intended mainly to support a
future array-foreign-key feature, they seem useful in their own right.
Marco Nenciarini and Gabriele Bartolini, reviewed by Alex Hunsaker
To generate btree-indexable conditions from regex WHERE conditions (such as
WHERE indexed_col ~ '^foo'), we need to be able to identify any fixed
prefix that a regex might have; that is, find any string that must be a
prefix of all strings satisfying the regex. We used to do that with
entirely ad-hoc code that looked at the source text of the regex. It
didn't know very much about regex syntax, which mostly meant that it would
fail to identify some optimizable cases; but Viktor Rosenfeld reported that
it would produce actively wrong answers for quantified parenthesized
subexpressions, such as '^(foo)?bar'. Rather than trying to extend the
ad-hoc code to cover this, let's get rid of it altogether in favor of
identifying prefixes by examining the compiled form of a regex.
To do this, I've added a new entry point "pg_regprefix" to the regex library;
hopefully it is defined in a sufficiently general fashion that it can remain
in the library when/if that code gets split out as a standalone project.
Since this bug has been there for a very long time, this fix needs to get
back-patched. However it depends on some other recent commits (particularly
the addition of wchar-to-database-encoding conversion), so I'll commit this
separately and then go to work on back-porting the necessary fixes.
These triggers are identical except for whether ri_Check_Pk_Match is to be
called, so factor out the common code to save a couple hundred lines.
Also, eliminate null-column checks in ri_Check_Pk_Match, since they're
duplicate with the calling functions and require unnecessary complication
in its API statement.
Simplify the way code is shared between RI_FKey_check_ins and
RI_FKey_check_upd, too.
Once upon a time, somebody was worried that cached RI plans wouldn't get
remade with new default values after ALTER TABLE ... SET DEFAULT, so they
didn't allow caching of plans for ON UPDATE/DELETE SET DEFAULT actions.
That time is long gone, though (and even at the time I doubt this was the
greatest hazard posed by ALTER TABLE...). So allow these triggers to cache
their plans just like the others.
The cache_plan argument to ri_PlanCheck is now vestigial, since there
are no callers that don't pass "true"; but I left it alone in case there
is any future need for it.
Previously, when executing an ON UPDATE SET NULL or SET DEFAULT action for
a multicolumn MATCH SIMPLE foreign key constraint, we would set only those
referencing columns corresponding to referenced columns that were changed.
This is what the SQL92 standard said to do --- but more recent versions
of the standard say that all referencing columns should be set to null or
their default values, no matter exactly which referenced columns changed.
At least for SET DEFAULT, that is clearly saner behavior. It's somewhat
debatable whether it's an improvement for SET NULL, but it appears that
other RDBMS systems read the spec this way. So let's do it like that.
This is a release-notable behavioral change, although considering that
our documentation already implied it was done this way, the lack of
complaints suggests few people use such cases.
Previously we followed the SQL92 wording, "MATCH <unspecified>", but since
SQL99 there's been a less awkward way to refer to the default style.
In addition to the code changes, pg_constraint.confmatchtype now stores
this match style as 's' (SIMPLE) rather than 'u' (UNSPECIFIED). This
doesn't affect pg_dump or psql because they use pg_get_constraintdef()
to reconstruct foreign key definitions. But other client-side code might
examine that column directly, so this change will have to be marked as
an incompatibility in the 9.3 release notes.
Because permissions are assigned to element types, not array types,
complaining about permission denied on an array type would be
misleading to users. So adjust the reporting to refer to the element
type instead.
In order not to duplicate the required logic in two dozen places,
refactor the permission denied reporting for types a bit.
pointed out by Yeb Havinga during the review of the type privilege
feature
Instead of identifying error locations only by line number (which could
be entirely unhelpful with long input lines), provide a fragment of the
input text too, placing this info in a new CONTEXT entry. Make the
error detail messages conform more closely to style guidelines, fix
failure to expose some of them for translation, ensure compiler can
check formats against supplied parameters.
The original coding misbehaved if "char" is signed, and also made the
extremely poor decision to print control characters literally when trying
to complain about them. Report and patch by Shigeru Hanada.
In passing, also fix core dump risk in report_parse_error() should the
parse state be something other than what it expects.
zaptreesubs() was coded to unconditionally reset a capture subre's
corresponding pmatch[] entry. However, in regexes without backrefs, that
array is caller-supplied and might not have as many entries as the regex
has capturing parens. So check the array length and do nothing if there
is no corresponding entry, much as subset() does. Failure to check this
resulted in a stack clobber in the case reported by Marko Kreen.
This bug appears to have been latent in the regex library from the
beginning. It was not exposed because find() called dissect() not
cdissect(), and the dissect() code path didn't ever call zaptreesubs()
(formerly zapmem()). When I unified dissect() and cdissect() in commit
4dd78bf37a, the problem was exposed.
Now that I've seen this, I'm rather suspicious that we might need to
back-patch it; but will refrain for now, for lack of evidence that
the case can be hit in the previous coding.
When the column name is an unqualified name, rather than table.column,
the error message complains about too many dotted names, which is
wrong. Report by Peter Eisentraut based on examination of the
sepgsql regression test output, but the problem also affects COMMENT.
New wording as suggested by Tom Lane.
Per recent discussion, the error message for this was actually a trifle
inaccurate, since it said "cannot be cast" which might be incorrect.
Adjust that wording, and add a HINT suggesting that a USING clause might
be needed.
This patch adjusts the core statistics views to match the decision already
taken for pg_stat_statements, that values representing elapsed time should
be represented as float8 and measured in milliseconds. By using float8,
we are no longer tied to a specific maximum precision of timing data.
(Internally, it's still microseconds, but we could now change that without
needing changes at the SQL level.)
The columns affected are
pg_stat_bgwriter.checkpoint_write_time
pg_stat_bgwriter.checkpoint_sync_time
pg_stat_database.blk_read_time
pg_stat_database.blk_write_time
pg_stat_user_functions.total_time
pg_stat_user_functions.self_time
pg_stat_xact_user_functions.total_time
pg_stat_xact_user_functions.self_time
The first four of these are new in 9.2, so there is no compatibility issue
from changing them. The others require a release note comment that they
are now double precision (and can show a fractional part) rather than
bigint as before; also their underlying statistics functions now match
the column definitions, instead of returning bigint microseconds.
bitmap_scan_cost_est() has to be able to cope with a BitmapOrPath, but
I'd taken a shortcut that didn't work for that case. Noted by Heikki.
Add some regression tests since this area is evidently under-covered.
We have been seeing intermittent buildfarm failures due to a query
sometimes not using an index-only scan plan, because a background
auto-ANALYZE prevented the table's all-visible bits from being set
immediately, thereby causing the estimated cost of an index-only scan
to go up considerably. Adjust the test case so that a bitmap index scan is
preferred instead, which serves equally well for the purpose the test case
is actually meant for. (Of course, it would be better to eliminate the
interference from auto-ANALYZE, but I see no low-risk way to do that,
so any such fix will have to be left for 9.3 or later.)
setrefs.c failed to do "rtoffset" adjustment of Vars in RETURNING lists,
which meant they were left with the wrong varnos when the RETURNING list
was in a subquery. That was never possible before writable CTEs, of
course, but now it's broken. The executor fails to notice any problem
because ExecEvalVar just references the ecxt_scantuple for any normal
varno; but EXPLAIN breaks when the varno is wrong, as illustrated in a
recent complaint from Bartosz Dmytrak.
Since the eventual rtoffset of the subquery is not known at the time
we are preparing its plan node, the previous scheme of executing
set_returning_clause_references() at that time cannot handle this
adjustment. Fortunately, it turns out that we don't really need to do it
that way, because all the needed information is available during normal
setrefs.c execution; we just have to dig it out of the ModifyTable node.
So, do that, and get rid of the kluge of early setrefs processing of
RETURNING lists. (This is a little bit of a cheat in the case of inherited
UPDATE/DELETE, because we are not passing a "root" struct that corresponds
exactly to what the subplan was built with. But that doesn't matter, and
anyway this is less ugly than early setrefs processing was.)
Back-patch to 9.1, where the problem became possible to hit.
Prohibiting this outright would break dumps taken from older versions
that contain such casts, which would create far more pain than is
justified here.
Per report by Jaime Casanova and subsequent discussion.
Instead of an exact cost comparison, use a fuzzy comparison with 1e-10
delta after all other path metrics have proved equal. This is to avoid
having platform-specific roundoff behaviors determine the choice when
two paths are really the same to our cost estimators. Adjust the
recently-added test case that made it obvious we had a problem here.
The original syntax wasn't universally loved, and it didn't allow its
usage in CREATE TABLE, only ALTER TABLE. It now works everywhere, and
it also allows using ALTER TABLE ONLY to add an uninherited CHECK
constraint, per discussion.
The pg_constraint column has accordingly been renamed connoinherit.
This commit partly reverts some of the changes in
61d81bd28d, particularly some pg_dump and
psql bits, because now pg_get_constraintdef includes the necessary NO
INHERIT within the constraint definition.
Author: Nikhil Sontakke
Some tweaks by me
This patch adjusts the treatment of parameterized paths so that all paths
with the same parameterization (same set of required outer rels) for the
same relation will have the same rowcount estimate. We cache the rowcount
estimates to ensure that property, and hopefully save a few cycles too.
Doing this makes it practical for add_path_precheck to operate without
a rowcount estimate: it need only assume that paths with different
parameterizations never dominate each other, which is close enough to
true anyway for coarse filtering, because normally a more-parameterized
path should yield fewer rows thanks to having more join clauses to apply.
In add_path, we do the full nine yards of comparing rowcount estimates
along with everything else, so that we can discard parameterized paths that
don't actually have an advantage. This fixes some issues I'd found with
add_path rejecting parameterized paths on the grounds that they were more
expensive than not-parameterized ones, even though they yielded many fewer
rows and hence would be cheaper once subsequent joining was considered.
To make the same-rowcounts assumption valid, we have to require that any
parameterized path enforce *all* join clauses that could be obtained from
the particular set of outer rels, even if not all of them are useful for
indexing. This is required at both base scans and joins. It's a good
thing anyway since the net impact is that join quals are checked at the
lowest practical level in the join tree. Hence, discard the original
rather ad-hoc mechanism for choosing parameterization joinquals, and build
a better one that has a more principled rule for when clauses can be moved.
The original rule was actually buggy anyway for lack of knowledge about
which relations are part of an outer join's outer side; getting this right
requires adding an outer_relids field to RestrictInfo.
We should be willing to cross-join two small relations if that allows us
to use an inner indexscan on a large relation (that is, the potential
indexqual for the large table requires both smaller relations). This
worked in simple cases but fell apart as soon as there was a join clause
to a fourth relation, because the existence of any two-relation join clause
caused the planner to not consider clauseless joins between other base
relations. The added regression test shows an example case adapted from
a recent complaint from Benoit Delbosc.
Adjust have_relevant_joinclause, have_relevant_eclass_joinclause, and
has_relevant_eclass_joinclause to consider that a join clause mentioning
three or more relations is sufficient grounds for joining any subset of
those relations, even if we have to do so via a cartesian join. Since such
clauses are relatively uncommon, this shouldn't affect planning speed on
typical queries; in fact it should help a bit, because the latter two
functions in particular get significantly simpler.
Although this is arguably a bug fix, I'm not going to risk back-patching
it, since it might have currently-unforeseen consequences.
Per mailing list discussion, we would like to keep the bytea functions
parallel to the text functions, so rename bytea_agg to string_agg,
which already exists for text.
Also, to satisfy the rule that we don't want aggregate functions of
the same name with a different number of arguments, add a delimiter
argument, just like string_agg for text already has.
Previously we attempted to throw an error or at least warning for missing
schemas, but this was done inconsistently because of implementation
restrictions (in many cases, GUC settings are applied outside transactions
so that we can't do system catalog lookups). Furthermore, there were
exceptions to the rule even in the beginning, and we'd been poking more
and more holes in it as time went on, because it turns out that there are
lots of use-cases for having some irrelevant items in a common search_path
value. It seems better to just adopt a philosophy similar to what's always
been done with Unix PATH settings, wherein nonexistent or unreadable
directories are silently ignored.
This commit also fixes the documentation to point out that schemas for
which the user lacks USAGE privilege are silently ignored. That's always
been true but was previously not documented.
This is mostly in response to Robert Haas' complaint that 9.1 started to
throw errors or warnings for missing schemas in cases where prior releases
had not. We won't adopt such a significant behavioral change in a back
branch, so something different will be needed in 9.1.
ANALYZE now accepts foreign tables and allows the table's FDW to control
how the sample rows are collected. (But only manual ANALYZEs will touch
foreign tables, for the moment, since among other things it's not very
clear how to handle remote permissions checks in an auto-analyze.)
contrib/file_fdw is extended to support this.
Etsuro Fujita, reviewed by Shigeru Hanada, some further tweaking by me.
Ants Aasma's original patch to add timing information for buffer I/O
requests exposed this data at the relation level, which was judged too
costly. I've here exposed it at the database level instead.
The parser got confused if a cursor parameter had the same name as
a plpgsql variable. Reported and diagnosed by Yeb Havinga, though
this isn't exactly his proposed fix.
Also, some mostly-but-not-entirely-cosmetic adjustments to the original
named-cursor-parameter patch, for code readability and better error
diagnostics.
The COPY documentation says "COPY FROM matches the input against the null
string before removing backslashes". It is therefore reasonable to presume
that null markers like E'\\0' will work ... and they did, until someone put
the tests in the wrong order during microoptimization-driven rewrites.
Since then, we've been failing if the null marker is something that would
de-escape to an invalidly-encoded string. Since null markers generally
need to be something that can't appear in the data, this represents a
nontrivial loss of functionality; surprising nobody noticed it earlier.
Per report from Jeff Davis. Backpatch to 8.4 where this got broken.
For some reason, in the original coding of the PlaceHolderVar mechanism
I had supposed that PlaceHolderVars couldn't propagate into subqueries.
That is of course entirely possible. When it happens, we need to treat
an outer-level PlaceHolderVar much like an outer Var or Aggref, that is
SS_replace_correlation_vars() needs to replace the PlaceHolderVar with
a Param, and then when building the finished SubPlan we have to provide
the PlaceHolderVar expression as an actual parameter for the SubPlan.
The handling of the contained expression is a bit delicate but it can be
treated exactly like an Aggref's expression.
In addition to the missing logic in subselect.c, prepjointree.c was failing
to search subqueries for PlaceHolderVars that need their relids adjusted
during subquery pullup. It looks like everyplace else that touches
PlaceHolderVars got it right, though.
Per report from Mark Murawski. In 9.1 and HEAD, queries affected by this
oversight would fail with "ERROR: Upper-level PlaceHolderVar found where
not expected". But in 9.0 and 8.4, you'd silently get possibly-wrong
answers, since the value transmitted into the subquery wouldn't go to null
when it should.
Fix loss of previous expression-simplification work when a transform
function fires: we must not simply revert to untransformed input tree.
Instead build a dummy FuncExpr node to pass to the transform function.
This has the additional advantage of providing a simpler, more uniform
API for transform functions.
Move documentation to a somewhat less buried spot, relocate some
poorly-placed code, be more wary of null constants and invalid typmod
values, add an opr_sanity check on protransform function signatures,
and some other minor cosmetic adjustments.
Note: although this patch touches pg_proc.h, no need for catversion
bump, because the changes are cosmetic and don't actually change the
intended catalog contents.
Making this operation look like a utility statement seems generally a good
idea, and particularly so in light of the desire to provide command
triggers for utility statements. The original choice of representing it as
SELECT with an IntoClause appendage had metastasized into rather a lot of
places, unfortunately, so that this patch is a great deal more complicated
than one might at first expect.
In particular, keeping EXPLAIN working for SELECT INTO and CREATE TABLE AS
subcommands required restructuring some EXPLAIN-related APIs. Add-on code
that calls ExplainOnePlan or ExplainOneUtility, or uses
ExplainOneQuery_hook, will need adjustment.
Also, the cases PREPARE ... SELECT INTO and CREATE RULE ... SELECT INTO,
which formerly were accepted though undocumented, are no longer accepted.
The PREPARE case can be replaced with use of CREATE TABLE AS EXECUTE.
The CREATE RULE case doesn't seem to have much real-world use (since the
rule would work only once before failing with "table already exists"),
so we'll not bother with that one.
Both SELECT INTO and CREATE TABLE AS still return a command tag of
"SELECT nnnn". There was some discussion of returning "CREATE TABLE nnnn",
but for the moment backwards compatibility wins the day.
Andres Freund and Tom Lane
When converting source files, pg_regress' inputdir and outputdir options were
ignored when computing the locations of the destination files. In consequence,
these options were effectively unusable when the regression inputs need to
be adjusted by pg_regress. This patch makes pg_regress put the converted files
in the same place that these options specify non-converted input or results
files are to be found. Backpatched to all live branches.
In commit 57664ed25e I tried to fix a bug
reported by Teodor Sigaev by making non-simple-Var output columns distinct
(by wrapping their expressions with dummy PlaceHolderVar nodes). This did
not work too well. Commit b28ffd0fcc fixed
some ensuing problems with matching to child indexes, but per a recent
report from Claus Stadler, constraint exclusion of UNION ALL subqueries was
still broken, because constant-simplification didn't handle the injected
PlaceHolderVars well either. On reflection, the original patch was quite
misguided: there is no reason to expect that EquivalenceClass child members
will be distinct. So instead of trying to make them so, we should ensure
that we can cope with the situation when they're not.
Accordingly, this patch reverts the code changes in the above-mentioned
commits (though the regression test cases they added stay). Instead, I've
added assorted defenses to make sure that duplicate EC child members don't
cause any problems. Teodor's original problem ("MergeAppend child's
targetlist doesn't match MergeAppend") is addressed more directly by
revising prepare_sort_from_pathkeys to let the parent MergeAppend's sort
list guide creation of each child's sort list.
In passing, get rid of add_sort_column; as far as I can tell, testing for
duplicate sort keys at this stage is dead code. Certainly it doesn't
trigger often enough to be worth expending cycles on in ordinary queries.
And keeping the test would've greatly complicated the new logic in
prepare_sort_from_pathkeys, because comparing pathkey list entries against
a previous output array requires that we not skip any entries in the list.
Back-patch to 9.1, like the previous patches. The only known issue in
this area that wasn't caused by the ill-advised previous patches was the
MergeAppend planning failure, which of course is not relevant before 9.1.
It's possible that we need some of the new defenses against duplicate child
EC entries in older branches, but until there's some clear evidence of that
I'm going to refrain from back-patching further.
This patch fixes the other major compatibility-breaking limitation of
SPGiST, that it didn't store anything for null values of the indexed
column, and so could not support whole-index scans or "x IS NULL"
tests. The approach is to create a wholly separate search tree for
the null entries, and use fixed "allTheSame" insertion and search
rules when processing this tree, instead of calling the index opclass
methods. This way the opclass methods do not need to worry about
dealing with nulls.
Catversion bump is for pg_am updates as well as the change in on-disk
format of SPGiST indexes; there are some tweaks in SPGiST WAL records
as well.
Heavily rewritten version of a patch by Oleg Bartunov and Teodor Sigaev.
(The original also stored nulls separately, but it reused GIN code to do
so; which required undesirable compromises in the on-disk format, and
would likely lead to bugs due to the GIN code being required to work in
two very different contexts.)
This patch improves selectivity estimation for the array <@, &&, and @>
(containment and overlaps) operators. It enables collection of statistics
about individual array element values by ANALYZE, and introduces
operator-specific estimators that use these stats. In addition,
ScalarArrayOpExpr constructs of the forms "const = ANY/ALL (array_column)"
and "const <> ANY/ALL (array_column)" are estimated by treating them as
variants of the containment operators.
Since we still collect scalar-style stats about the array values as a
whole, the pg_stats view is expanded to show both these stats and the
array-style stats in separate columns. This creates an incompatible change
in how stats for tsvector columns are displayed in pg_stats: the stats
about lexemes are now displayed in the array-related columns instead of the
original scalar-related columns.
There are a few loose ends here, notably that it'd be nice to be able to
suppress either the scalar-style stats or the array-element stats for
columns for which they're not useful. But the patch is in good enough
shape to commit for wider testing.
Alexander Korotkov, reviewed by Noah Misch and Nathan Boley
The only reason this didn't work before was that parserOpenTable()
rejects composite types. So use relation_openrv() directly and
manually do the errposition() setup that parserOpenTable() does.
This effectively reverts 7886cc73ad,
which was done under the impression that isolationtester needs libpq,
which it no longer does (and never really did).
It's not necessary and can only create confusion about which libpq
installation should be used.
Also remove some dead code from the makefile that was apparently
copied from elsewhere.
Cases where a back-reference is part of a larger subexpression that
is quantified have never worked in Spencer's regex engine, because
he used a compile-time transformation that neglected the need to
check the back-reference match in iterations before the last one.
(That was okay for capturing parens, and we still do it if the
regex has *only* capturing parens ... but it's not okay for backrefs.)
To make this work properly, we have to add an "iteration" node type
to the regex engine's vocabulary of sub-regex nodes. Since this is a
moderately large change with a fair risk of introducing new bugs of its
own, apply to HEAD only, even though it's a fix for a longstanding bug.
First, as noted by Itagaki Takahiro, a datum of type JSON doesn't
need to be escaped. Second, ensure that numeric output not in
the form of a legal JSON number is quoted and escaped.
The syntax "\n*", that is a backref with a * quantifier directly applied
to it, has never worked correctly in Spencer's library. This has been an
open bug in the Tcl bug tracker since 2005:
https://sourceforge.net/tracker/index.php?func=detail&aid=1115587&group_id=10894&atid=110894
The core of the problem is in parseqatom(), which first changes "\n*" to
"\n+|" and then applies repeat() to the NFA representing the backref atom.
repeat() thinks that any arc leading into its "rp" argument is part of the
sub-NFA to be repeated. Unfortunately, since parseqatom() already created
the arc that was intended to represent the empty bypass around "\n+", this
arc gets moved too, so that it now leads into the state loop created by
repeat(). Thus, what was supposed to be an "empty" bypass gets turned into
something that represents zero or more repetitions of the NFA representing
the backref atom. In the original example, in place of
^([bc])\1*$
we now have something that acts like
^([bc])(\1+|[bc]*)$
At runtime, the branch involving the actual backref fails, as it's supposed
to, but then the other branch succeeds anyway.
We could no doubt fix this by some rearrangement of the operations in
parseqatom(), but that code is plenty ugly already, and what's more the
whole business of converting "x*" to "x+|" probably needs to go away to fix
another problem I'll mention in a moment. Instead, this patch suppresses
the *-conversion when the target is a simple backref atom, leaving the case
of m == 0 to be handled at runtime. This makes the patch in regcomp.c a
one-liner, at the cost of having to tweak cbrdissect() a little. In the
event I went a bit further than that and rewrote cbrdissect() to check all
the string-length-related conditions before it starts comparing characters.
It seems a bit stupid to possibly iterate through many copies of an
n-character backreference, only to fail at the end because the target
string's length isn't a multiple of n --- we could have found that out
before starting. The existing coding could only be a win if integer
division is hugely expensive compared to character comparison, but I don't
know of any modern machine where that might be true.
This does not fix all the problems with quantified back-references. In
particular, the code is still broken for back-references that appear within
a larger expression that is quantified (so that direct insertion of the
quantification limits into the BACKREF node doesn't apply). I think fixing
that will take some major surgery on the NFA code, specifically introducing
an explicit iteration node type instead of trying to transform iteration
into concatenation of modified regexps.
Back-patch to all supported branches. In HEAD, also add a regression test
case for this. (It may seem a bit silly to create a regression test file
for just one test case; but I'm expecting that we will soon import a whole
bunch of regex regression tests from Tcl, so might as well create the
infrastructure now.)
Some line feeds are added to target lists and from lists to make
them more readable. By default they wrap at 80 columns if possible,
but the wrap column is also selectable - if 0 it wraps after every
item.
Andrew Dunstan, reviewed by Hitoshi Harada.
This extends the changes of commit 6252c4f9e2
so that we run the cleanup hook earlier for failure cases as well as
success cases. As before, the point is to avoid an assertion failure from
an Assert I added in commit a874fe7b4c, which
was meant to check that no user-written code can be called during portal
cleanup. This fixes a case reported by Pavan Deolasee in which the Assert
could be triggered during backend exit (see the new regression test case),
and also prevents the possibility that the cleanup hook is run after
portions of the portal's state have already been recycled. That doesn't
really matter in current usage, but it foreseeably could matter in the
future.
Back-patch to 9.1 where the Assert in question was added.
The hstore and json datatypes both have record-conversion functions that
pay attention to column names in the composite values they're handed.
We used to not worry about inserting correct field names into tuple
descriptors generated at runtime, but given these examples it seems
useful to do so. Observe the nicer-looking results in the regression
tests whose results changed.
catversion bump because there is a subtle change in requirements for stored
rule parsetrees: RowExprs from ROW() constructs now have to include field
names.
Andrew Dunstan and Tom Lane
We don't normally allow quals to be pushed down into a view created
with the security_barrier option, but functions without side effects
are an exception: they're OK. This allows much better performance in
common cases, such as when using an equality operator (that might
even be indexable).
There is an outstanding issue here with the CREATE FUNCTION / ALTER
FUNCTION syntax: there's no way to use ALTER FUNCTION to unset the
leakproof flag. But I'm committing this as-is so that it doesn't
have to be rebased again; we can fix up the grammar in a future
commit.
KaiGai Kohei, with some wordsmithing by me.
Per buildfarm, we sometimes get row-ordering variations in the output.
This also makes this query look more like numerous other ones in the same
test file.
Since bool_and() is equivalent to min(), and bool_or() to max(), we might
as well let them be index-optimized in the same way. The practical value
of this is debatable at best, but it seems nearly cost-free to enable it.
Code-wise, we need only adjust the entries in pg_aggregate. There is a
measurable planning speed penalty for a query involving one of these
aggregates, but it is only a few percent in simple cases, so that seems
acceptable.
Marti Raudsepp, reviewed by Abhijit Menon-Sen
When written, textanycat, anytextcat, quote_literal, and quote_nullable
were marked volatile, because they could invoke arbitrary type-specific
output functions as part of casting their anyelement arguments to text.
Since then, we have defined a project policy that I/O functions must not
be volatile, as per commit aab353a60b.
So these functions can safely be downgraded to stable. Most of the time
this makes no difference since they'll get inlined anyway, but as noted
by Andrew Dunstan, there are cases where the volatile marking prevents
optimizations that the planner does before function inlining. (I think
I might have overlooked these functions in the earlier commit on the
grounds that inlining would make it moot, but not so --- tgl)
This change results in a change in the expected output of the json
regression tests, because the planner can now flatten a sub-select
that it failed to before. The old output is preferable, but getting
that back will require some as-yet-unfinished work on RowExpr handling.
Marti Raudsepp
Use a target-specific variable to add to CPPFLAGS instead of writing a
custom .c -> .o rule. This will ensure that dependency tracking is
used when enabled.
This reverts commit 500cf66d55. As was
more or less expected, a small minority of platforms won't accept
denormalized input even with the recent changes. It doesn't seem
especially helpful to test this if we're going to have to provide an
alternate expected-file to allow failure.
This was submitted with the previous patch, but I'm committing it
separately to ease backing it out if these results prove too unportable.
Marti Raudsepp, after a proposal by Jeroen Vermeulen
Don't quote the output of format_procedure(); it's already quoted quite
enough. Remove the fn_name field, which was now just dead weight. Fix
remaining expected-output files.
Like the XML data type, we simply store JSON data as text, after checking
that it is valid. More complex operations such as canonicalization and
comparison may come later, but this is enough for not.
There are a few open issues here, such as whether we should attempt to
detect UTF-8 surrogate pairs represented as \uXXXX\uYYYY, but this gets
the basic framework in place.
In commit 57664ed25e, I made the planner
wrap non-simple-variable outputs of appendrel children (IOW, child SELECTs
of UNION ALL subqueries) inside PlaceHolderVars, in order to solve some
issues with EquivalenceClass processing. However, this means that any
upper-level WHERE clauses mentioning such outputs will now contain
PlaceHolderVars after they're pushed down into the appendrel child,
and that prevents indxpath.c from recognizing that they could be matched
to index expressions. To fix, add explicit stripping of PlaceHolderVars
from index operands, same as we have long done for RelabelType nodes.
Add a regression test covering both this and the plain-UNION case (which
is a totally different code path, but should also be able to do it).
Per bug #6416 from Matteo Beccati. Back-patch to 9.1, same as the
previous change.
Formerly we passed an empty list to each per-child-table invocation of
grouping_planner, and then merged the results into the global list.
However, that fails if there's a CTE attached to the statement, because
create_ctescan_plan uses the list to find the plan referenced by a CTE
reference; so it was unable to find any CTEs attached to the outer UPDATE
or DELETE. But there's no real reason not to use the same list throughout
the process, and doing so is simpler and faster anyway.
Per report from Josh Berkus of "could not find plan for CTE" failures.
Back-patch to 9.1 where we added support for WITH attached to UPDATE or
DELETE. Add some regression test cases, too.
Much more could be done here, but at least now we have *some* automated
test coverage of that mechanism. In particular this tests the writable-CTE
case reported by Phil Sorber.
In passing, remove isolationtester's arbitrary restriction on the number of
steps in a permutation list. I used this so that a single spec file could
be used to run several related test scenarios, but there are other possible
reasons to want a step series that's not exactly a permutation. Improve
documentation and fix a couple other nits as well.
Hitherto, the information schema only showed explicitly granted
privileges that were visible in the *acl catalog columns. If no
privileges had been granted, the implicit privileges were not shown.
To fix that, add an SQL-accessible version of the acldefault()
function, and use that inside the aclexplode() calls to substitute the
catalog-specific default privilege set for null values.
reviewed by Abhijit Menon-Sen
We now use the same error message for ALTER TABLE .. ADD COLUMN or
ALTER TABLE .. RENAME COLUMN that we do for CREATE TABLE. The old
message was accurate, but might be confusing to users not aware of our
system columns.
Vik Reykja, with some changes by me, and further proofreading by Tom Lane
Add counters for number and size of temporary files used
for spill-to-disk queries for each database to the
pg_stat_database view.
Tomas Vondra, review by Magnus Hagander
Rip out a regression test that doesn't play well with settings put in
place by the build farm, and rewrite the code in CheckIndexCompatible
in a hopefully more transparent style.
This enables a bunch of features, notably ON_ERROR_ROLLBACK. It also
makes COPY failure (either in the server or psql) as a whole behave more
sanely in psql.
Additionally, having more commands in the same command line as COPY
works better (though since psql splits lines at semicolons, this doesn't
matter much unless you're using -c).
Also tighten a couple of switches on PQresultStatus() to add
PGRES_COPY_BOTH support and stop assuming that unknown statuses received
are errors; have those print diagnostics where warranted.
Author: Noah Misch
This gives up the "don't rewrite the index" behavior in a couple of
relatively unimportant cases, such as changing between an array type
and an unconstrained domain over that array type, in return for
making this code more future-proof.
Noah Misch
This reports the depth level of triggers currently in execution, or zero
if not called from inside a trigger.
No catversion bump in this patch, but you have to initdb if you want
access to the new function.
Author: Kevin Grittner
Drop the role we create, so regression tests pass even when run more
than once against the same cluster, a problem noted by Tom Lane and
Jeff Janes. Also, rename the temporary role so that it starts with
"regress_", to make it unlikely that we'll collide with an existing
role name while running "make installcheck", per further gripe from
Tom Lane.
This separates the state (running/idle/idleintransaction etc) into
it's own field ("state"), and leaves the query field containing just
query text.
The query text will now mean "current query" when a query is running
and "last query" in other states. Accordingly,the field has been
renamed from current_query to query.
Since backwards compatibility was broken anyway to make that, the procpid
field has also been renamed to pid - along with the same field in
pg_stat_replication for consistency.
Scott Mead and Magnus Hagander, review work from Greg Smith
isolationtester is now able to continue running other permutations when
it detects that one of them is invalid, which is useful during initial
development of spec files.
Author: Alexander Shulgin
The originally-chosen test case gives different results in es_EC locale
because of unusual rule for sorting strings beginning with "LL". Adjust
the comparison value to avoid that, while hopefully not introducing new
locale dependencies elsewhere. Per report from Jaime Casanova.
A permutation that specifies more steps than defined causes
isolationtester to crash, so avoid that. Using less steps than defined
should probably not be a problem, but no spec currently does that.
The original implementation of this interpreted it as a kind of
"inheritance" facility and named all the internal structures
accordingly. This turned out to be very confusing, because it has
nothing to do with the INHERITS feature. So rename all the internal
parser infrastructure, update the comments, adjust the error messages,
and split up the regression tests.
ALTER DOMAIN / DROP CONSTRAINT on a nonexistent constraint name did
not report any error. Now it reports an error. The IF EXISTS option
was added to get the usual behavior of ignoring nonexistent objects to
drop.
As previously coded, the QueryDesc's dest pointer was left dangling
(pointing at an already-freed receiver object) after ExecutorEnd. It's a
bit astonishing that it took us this long to notice, and I'm not sure that
the known problem case with SQL functions is the only one. Fix it by
saving and restoring the original receiver pointer, which seems the most
bulletproof way of ensuring any related bugs are also covered.
Per bug #6379 from Paul Ramsey. Back-patch to 8.4 where the current
handling of SELECT INTO was introduced.
Because coerce_type recurses into the argument of a CollateExpr,
coerce_to_target_type's longstanding code for detecting whether coerce_type
had actually done anything (to wit, returned a different node than it
passed in) was broken in 9.1. This resulted in unexpected failures in
hide_coercion_node; which was not the latter's fault, since it's critical
that we never call it on anything that wasn't inserted by coerce_type.
(Else we might decide to "hide" a user-written function call.)
Fix by removing and replacing the CollateExpr in coerce_to_target_type
itself. This is all pretty ugly but I don't immediately see a way to make
it nicer.
Per report from Jean-Yves F. Barbier.
The original test cases gave varying results depending on whether the
locale sorts digits before or after letters. Since that's not really
what we wish to test here, adjust the test data to not contain any strings
beginning with digits. Per report from Pavel Stehule.
It's potentially useful for an index to repeat the same indexable column
or expression in multiple index columns, if the columns have different
opclasses. (If they share opclasses too, the duplicate column is pretty
useless, but nonetheless we've allowed such cases since 9.0.) However,
the planner failed to cope with this, because createplan.c was relying on
simple equal() matching to figure out which index column each index qual
is intended for. We do have that information available upstream in
indxpath.c, though, so the fix is to not flatten the multi-level indexquals
list when putting it into an IndexPath. Then we can rely on the sublist
structure to identify target index columns in createplan.c. There's a
similar issue for index ORDER BYs (the KNNGIST feature), so introduce a
multi-level-list representation for that too. This adds a bit more
representational overhead, but we might more or less buy that back by not
having to search for matching index columns anymore in createplan.c;
likewise btcostestimate saves some cycles.
Per bug #6351 from Christian Rudolph. Likely symptoms include the "btree
index keys must be ordered by attribute" failure shown there, as well as
"operator MMMM is not a member of opfamily NNNN".
Although this is a pre-existing problem that can be demonstrated in 9.0 and
9.1, I'm not going to back-patch it, because the API changes in the planner
seem likely to break things such as index plugins. The corner cases where
this matters seem too narrow to justify possibly breaking things in a minor
release.
When a view is marked as a security barrier, it will not be pulled up
into the containing query, and no quals will be pushed down into it,
so that no function or operator chosen by the user can be applied to
rows not exposed by the view. Views not configured with this
option cannot provide robust row-level security, but will perform far
better.
Patch by KaiGai Kohei; original problem report by Heikki Linnakangas
(in October 2009!). Review (in earlier versions) by Noah Misch and
others. Design advice by Tom Lane and myself. Further review and
cleanup by me.
You could already rename domains using ALTER TYPE, but with this new
command it is more consistent with how other commands treat domains as
a subcategory of types.
The original coding of this function overlooked the possibility that
it could be passed anything except simple OpExpr indexquals. But
ScalarArrayOpExpr is possible too, and the code would probably crash
(and surely give ridiculous answers) in such a case. Add logic to try
to estimate sanely for such cases.
In passing, fix the treatment of inner-indexscan cost estimation: it was
failing to scale up properly for multiple iterations of a nestloop.
(I think somebody might've thought that index_pages_fetched() is linear,
but of course it's not.)
Report, diagnosis, and preliminary patch by Marti Raudsepp; I refactored
it a bit and fixed the cost estimation.
Back-patch into 9.1 where the bogus code was introduced.
This adds support for the more or less SQL-conforming USAGE privilege
on types and domains. The intent is to be able restrict which users
can create dependencies on types, which restricts the way in which
owners can alter types.
reviewed by Yeb Havinga
This makes them enforceable only on the parent table, not on children
tables. This is useful in various situations, per discussion involving
people bitten by the restrictive behavior introduced in 8.4.
Message-Id:
8762mp93iw.fsf@comcast.netCAFaPBrSMMpubkGf4zcRL_YL-AERUbYF_-ZNNYfb3CVwwEqc9TQ@mail.gmail.com
Authors: Nikhil Sontakke, Alex Hunsaker
Reviewed by Robert Haas and myself
Operator classes can specify whether or not they support this; this
preserves the flexibility to use lossy representations within an index.
In passing, move constant data about a given index into the rd_amcache
cache area, instead of doing fresh lookups each time we start an index
operation. This is mainly to try to make sure that spgcanreturn() has
insignificant cost; I still don't have any proof that it matters for
actual index accesses. Also, get rid of useless copying of FmgrInfo
pointers; we can perfectly well use the relcache's versions in-place.
These entries could never be matched to an index clause because they don't
have the index datatype on the left-hand side of the operator. (Their
commutators are in the opclass, which is sensible, but that doesn't mean
these operators should be.) Spotted by a test that I recently added to
opr_sanity to catch exactly this type of thinko. AFAICT there is no code
in gistproc.c that is specifically meant to cover these cases, so nothing
to remove at that level.
SP-GiST is comparable to GiST in flexibility, but supports non-balanced
partitioned search structures rather than balanced trees. As described at
PGCon 2011, this new indexing structure can beat GiST in both index build
time and query speed for search problems that it is well matched to.
There are a number of areas that could still use improvement, but at this
point the code seems committable.
Teodor Sigaev and Oleg Bartunov, with considerable revisions by Tom Lane
Original patch by Lars Kanis, reviewed by Nishiyama Tomoaki and tweaked some by me.
This compiler, or at least the latest version of it, is currently broken, and
only passes the regression tests if built with -O0.
This patch creates an API whereby a btree index opclass can optionally
provide non-SQL-callable support functions for sorting. In the initial
patch, we only use this to provide a directly-callable comparator function,
which can be invoked with a bit less overhead than the traditional
SQL-callable comparator. While that should be of value in itself, the real
reason for doing this is to provide a datatype-extensible framework for
more aggressive optimizations, as in Peter Geoghegan's recent work.
Robert Haas and Tom Lane
Since record[] uses array_in, it needs to have its element type passed
as typioparam. In HEAD and 9.1, this fix essentially reverts commit
9bc933b212, which was a hack that is no
longer needed since domains don't set their typelem anymore. Before
that, adjust the logic so that only domains are excluded from being
treated like arrays, rather than assuming that only base types should
be included. Add a regression test to demonstrate the need for this.
Per report from Maxim Boguk.
Back-patch to 8.4, where type record[] was added.
This should make it easier to identify which row is problematic when an
insert or update is processing many rows.
The formatting is similar to that for unique-index violation messages,
except that we limit field widths to 64 bytes since otherwise the message
could get unreasonably long. (In particular, there's currently no attempt
to quote or escape field values that contain commas etc.)
Jan Kundrát, reviewed by Royce Ausburn, somewhat rewritten by me.
In the original implementation, a range-contained-by search had to scan
the entire index because an empty range could be lurking anywhere.
Improve that by adding a flag to upper GiST entries that says whether the
represented subtree contains any empty ranges.
Also, make a simple mod to the penalty function to discourage empty ranges
from getting pushed into subtrees without any. This needs more work, and
the picksplit function should be taught about it too, but that code can be
improved without causing an on-disk compatibility break; so we'll leave it
for another day.
Since we're breaking on-disk compatibility of range values anyway, I took
the opportunity to reorganize the range flags bits; the unused
RANGE_xB_NULL bits are now adjacent, which might open the door for using
them in some other way later.
In passing, remove the GiST range opclass entry for <>, which doesn't seem
like it can really be indexed usefully.
Alexander Korotkov, with some editorializing by Tom
It runs the regression tests, runs pg_upgrade on the populated
database, and compares the before and after dumps. While not actually
a cross-version upgrade, this does detect omissions and bugs in the
involved tools from time to time. It's also possible to do a
cross-version upgrade by manually supplying parameters.
Per discussion, the zero-argument forms aren't really worth the catalog
space (just write 'empty' instead). The one-argument forms have some use,
but they also have a serious problem with looking too much like functional
cast notation; to the point where in many real use-cases, the parser would
misinterpret what was wanted.
Committing this as a separate patch, with the thought that we might want
to revert part or all of it if we can think of some way around the cast
ambiguity.
Implement these tests directly instead of constructing a singleton range
and then applying range-contains. This saves a range serialize/deserialize
cycle as well as a couple of redundant bound-comparison steps, and adds
very little code on net.
Remove elem_contained_by_range from the GiST opclass: it doesn't belong
there because there is no way to use it in an index clause (where the
indexed column would have to be on the left). Its commutator is in the
opclass, and that's what counts.
In the normal course of events, this matters only if ALTER DEFAULT
PRIVILEGES has been used to revoke default INSERT permission. Whether
or not the new behavior is more or less likely to be what the user wants
when dealing only with the built-in privilege facilities is arguable,
but it's clearly better when using a loadable module such as sepgsql
that may use the hook in ExecCheckRTPerms to enforce additional
permissions checks.
KaiGai Kohei, reviewed by Albe Laurenz
Per discussion, relax the range input/construction rules so that the
only hard error is lower bound > upper bound. Cases where the lower
bound is <= upper bound, but the range nonetheless normalizes to empty,
are now permitted.
Fix core dump in range_adjacent when bounds are infinite. Marginal
cleanup of regression test cases, some more code commenting.
Fix up some infelicitous coding in DefineRange, and add some missing error
checks. Rearrange operator strategy number assignments for GiST anyrange
opclass so that they don't make such a mess of opr_sanity's table of
operator names associated with different strategy numbers. Assign
hopefully-temporary selectivity estimators to range operators that didn't
have one --- poor as the estimates are, they're still a lot better than the
default 0.5 estimate, and they'll shut up the opr_sanity test that wants to
see selectivity estimators on all built-in operators.
This gets rid of an impressive amount of duplicative code, with only
minimal behavior changes. DROP FOREIGN DATA WRAPPER now requires object
ownership rather than superuser privileges, matching the documentation
we already have. We also eliminate the historical warning about dropping
a built-in function as unuseful. All operations are now performed in the
same order for all object types handled by dropcmds.c.
KaiGai Kohei, with minor revisions by me
Use of anynonarray was a crude hack to get around ambiguity versus the
array inclusion operators of the same names. My previous patch to extend
the parser's type resolution heuristics makes that unnecessary, so use
the more general declaration instead. This eliminates a wart that these
operators couldn't be used with ranges over arrays, which are otherwise
supported just fine.
Also, mark range_before and range_after as commutator operators,
per discussion with Jeff Davis.
Fix assorted infelicities, such as dependency on OIDs that aren't
hardwired, as well as outright misdeclaration of daterange_canonical(),
which resulted in crashes if you invoked it directly. Add some more
regression tests to try to catch similar mistakes in future.
A range type whose element type has 'd' alignment must have 'd' alignment
itself, else there is no guarantee that the element value can be used
in-place. (Because range_deserialize uses att_align_pointer which forcibly
aligns the given pointer, violations of this rule did not lead to SIGBUS
but rather to garbage data being extracted, as in one of the added
regression test cases.)
Also, you can't put a toast pointer inside a range datum, since the
referenced value could disappear with the range datum still present.
For consistency with the handling of arrays and records, I also forced
decompression of in-line-compressed bound values. It would work to store
them as-is, but our policy is to avoid situations that might result in
double compression.
Add assorted regression tests for this, and bump catversion because of
fixes to built-in pg_type entries.
Also some marginal cleanup of inconsistent/unnecessary error checks.
Change range_before, range_after, range_adjacent to return false rather
than throwing an error when one or both input ranges are empty.
The original definition is unnecessarily difficult to use, and also can
result in undesirable planner failures since the planner could try to
compare an empty range to something else while deriving statistical
estimates. (This was, in fact, the cause of repeatable regression test
failures on buildfarm member jaguar, as well as intermittent failures
elsewhere.)
Also tweak rangetypes regression test to not drop all the objects it
creates, so that the final state of the regression database contains
some rangetype objects for pg_dump testing.
No functional changes in this commit (except I could not resist the
temptation to re-word a couple of error messages). This is just manual
cleanup after pgindent to make the code look reasonably like other PG
code, in preparation for more detailed code review to come.
In particular, my previous patch expected the create_index test to run
before the inherit test; but this was only true in the serial schedule.
Rearrange this portion of the schedules to be more consistent.
Per buildfarm results.
Add PlaceHolderVar wrappers as needed to make UNION ALL sub-select output
expressions appear non-constant and distinct from each other. This makes
the world safe for add_child_rel_equivalences to do what it does. Before,
it was possible for that function to add identical expressions to different
EquivalenceClasses, which logically should imply merging such ECs, which
would be wrong; or to improperly add a constant to an EquivalenceClass,
drastically changing its behavior. Per report from Teodor Sigaev.
The only currently known consequence of this bug is "MergeAppend child's
targetlist doesn't match MergeAppend" planner failures in 9.1 and later.
I am suspicious that there may be other failure modes that could affect
older release branches; but in the absence of any hard evidence, I'll
refrain from back-patching further than 9.1.
Further experimentation reveals that my previous change didn't fix the
issue entirely: these tests would still fail at the spring-forward DST
transition. There doesn't seem to be any great value in testing this
specific issue for both timestamp and timestamptz, so just lose the
latter tests.
I broke it in a previous commit because I neglected to install the
necessary incantations to have getopt() work on Windows.
Per red blots in buildfarm.
This mode prints out the permutations that would be run by the given
spec file, in the same format used by the permutation lines in spec
files. This helps in building new spec files.
Author: Alexander Shulgin, with some tweaks by me
If we use a PlaceHolderVar from the outer relation in an inner indexscan,
we need to reference the PlaceHolderVar as such as the value to be passed
in from the outer relation. The previous code effectively tried to
reconstruct the PHV from its component expression, which doesn't work since
(a) the Vars therein aren't necessarily bubbled up far enough, and (b) it
would be the wrong semantics anyway because of the possibility that the PHV
is supposed to have gone to null at some point before the current join.
Point (a) led to "variable not found in subplan target list" planner
errors, but point (b) would have led to silently wrong answers.
Per report from Roger Niederland.
As pointed out by Naoya Anzai, my previous try at this was a few bricks
shy of a load, because I had forgotten that the initial-positioning logic
might not try to skip over nulls at the end of the index the scan will
start from. We ought to fix that, because it represents an unnecessary
inefficiency, but first let's get the scan-stop logic back to a safe
state. With this patch, we preserve the performance benefit requested
in bug #6278 for the case of scanning forward into NULLs (in a NULLS
LAST index), but the reverse case of scanning backward across NULLs
when there's no suitable initial-positioning qual is still inefficient.
When a foreign-key constraint references another column of the same table,
row updates will queue both the PK's ON UPDATE action and the FK's CHECK
action in the same event. The ON UPDATE action must execute first, else
the CHECK will check a non-final state of the row and possibly throw an
inappropriate error, as seen in bug #6268 from Roman Lytovchenko.
Now, the firing order of multiple triggers for the same event is determined
by the sort order of their pg_trigger.tgnames, and the auto-generated names
we use for FK triggers are "RI_ConstraintTrigger_NNNN" where NNNN is the
trigger OID. So most of the time the firing order is the same as creation
order, and so rearranging the creation order fixes it.
This patch will fail to fix the problem if the OID counter wraps around or
adds a decimal digit (eg, from 99999 to 100000) while we are creating the
triggers for an FK constraint. Given the small odds of that, and the low
usage of self-referential FKs, we'll live with that solution in the back
branches. A better fix is to change the auto-generated names for FK
triggers, but it seems unwise to do that in stable branches because there
may be client code that depends on the naming convention. We'll fix it
that way in HEAD in a separate patch.
Back-patch to all supported branches, since this bug has existed for a long
time.
Essentially, the "IF EXISTS" portion was being ignored, and an error
thrown anyway if the opfamily did not exist.
I broke this in commit fd1843ff8979c0461fb3f1a9eab61140c977e32d; so
backpatch to 9.1.X.
Report and diagnosis by KaiGai Kohei.
Add a column pg_class.relallvisible to remember the number of pages that
were all-visible according to the visibility map as of the last VACUUM
(or ANALYZE, or some other operations that update pg_class.relpages).
Use relallvisible/relpages, instead of an arbitrary constant, to estimate
how many heap page fetches can be avoided during an index-only scan.
This is pretty primitive and will no doubt see refinements once we've
acquired more field experience with the index-only scan mechanism, but
it's way better than using a constant.
Note: I had to adjust an underspecified query in the window.sql regression
test, because it was changing answers when the plan changed to use an
index-only scan. Some of the adjacent tests perhaps should be adjusted
as well, but I didn't do that here.
When I consolidated two copies of the HOT-chain search logic in commit
4da99ea423, I introduced a behavior
change: the old code wouldn't necessarily traverse the entire chain,
if the most recently returned tuple were updated while the HOT chain
traversal is in progress. The new behavior seems more correct, but
unfortunately, the code here relies on a scan with SnapshotNow failing
to see its own updates. That seems pretty shaky even with the old HOT
chain traversal behavior, since there's no guarantee that these
updates will always be HOT, but it's trivial to broke a failure with
the new HOT search logic. Fix by updating just the first matching
pg_constraint tuple, rather than all of them, since there should be
only one anyway. But since nobody has reproduced this failure on older
versions, no back-patch for now.
Report and test case by Alex Hunsaker; tablecmds.c changes by me.
This bollixes the test because it's expecting to see the idx_tup_fetch
counter increase, which won't happen if heap fetches were avoided by use
of an index-only scan. Per buildfarm results.
While at it, let's just make sure that enable_seqscan and enable_indexscan
are ON for this test ...
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
We'll now use "exists" for EXISTS(SELECT ...), "array" for ARRAY(SELECT
...), or the sub-select's own result column name for a simple expression
sub-select. Previously, you usually got "?column?" in such cases.
Marti Raudsepp, reviewed by Kyotaro Horiugchi
We now report errors reported by the just-unblocked and unblocking
transactions identically; this should fix relatively common buildfarm
failures reported by animals that are failing the "wrong" session.
In commit c1d9579dd8, I changed things so
that the output of the Agg node that feeds the window functions would not
list any ungrouped Vars directly. Formerly, for example, the Agg tlist
might have included both "x" and "sum(x)", which is not really valid if
"x" isn't a grouping column. If we then had a window function ordering on
something like "sum(x) + 1", prepare_sort_from_pathkeys would find no exact
match for this in the Agg tlist, and would conclude that it must recompute
the expression. But it would break the expression down to just the Var
"x", which it would find in the tlist, and then rebuild the ORDER BY
expression using a reference to the subplan's "x" output. Now, after the
above-referenced changes, "x" isn't in the Agg tlist if it's not a grouping
column, so that prepare_sort_from_pathkeys fails with "could not find
pathkey item to sort", as reported by Bricklen Anderson.
The fix is to not break down Aggrefs into their component parts, but just
treat them as irreducible expressions to be sought in the subplan tlist.
This is definitely OK for the use with respect to window functions in
grouping_planner, since it just built the tlist being used on the same
basis. AFAICT it is safe for other uses too; most of the other call sites
couldn't encounter Aggrefs anyway.
Per bug #6205, reported by Abel Abraham Camarillo Ojeda. This isn't a
particularly elegant fix, but I'm trying to minimize the chances of
causing yet another round of breakage.
Adjust regression tests to exercise this case.
Rewrite plancache.c so that a "cached plan" (which is rather a misnomer
at this point) can support generation of custom, parameter-value-dependent
plans, and can make an intelligent choice between using custom plans and
the traditional generic-plan approach. The specific choice algorithm
implemented here can probably be improved in future, but this commit is
all about getting the mechanism in place, not the policy.
In addition, restructure the API to greatly reduce the amount of extraneous
data copying needed. The main compromise needed to make that possible was
to split the initial creation of a CachedPlanSource into two steps. It's
worth noting in particular that SPI_saveplan is now deprecated in favor of
SPI_keepplan, which accomplishes the same end result with zero data
copying, and no need to then spend even more cycles throwing away the
original SPIPlan. The risk of long-term memory leaks while manipulating
SPIPlans has also been greatly reduced. Most of this improvement is based
on use of the recently-added MemoryContextSetParent primitive.
Trailing-zero stripping applied by the FM specifier could strip zeroes
to the left of the decimal point, for a format with no digit positions
after the decimal point (such as "FM999.").
Reported and diagnosed by Marti Raudsepp, though I didn't use his patch.
1. Use new dropdb --if-exists option, to avoid alarming the user if
the database being dropped doesn't already exist.
2. Bail out if createdb fails.
3. exit 1 if the checks fail.
4. Make it executable.
Josh Kupershmidt, with some kibitzing by me.
Previously, 'yesterday 04:00:00'::timestamp didn't do the same thing as
'04:00:00 yesterday'::timestamp, and the return value from the latter
was midnight rather than the specified time.
Dean Rasheed, with some stylistic changes
This was deemed unnecessary initially but in later discussion it was
agreed otherwise.
Original file from Kevin Grittner, allegedly from Dan Ports.
I had to clean up whitespace a bit per changes from Heikki.
Rather than dumping out the raw array as PostgreSQL represents it
internally, we now print it out in a format similar to the one in
which the user input it, which seems a lot more user friendly.
Shigeru Hanada
Due to tuple-slot mismanagement, evaluation of WHEN conditions for AFTER
ROW UPDATE triggers could crash if there had been a BEFORE ROW trigger
fired for the same update. Fix by not trying to overload the use of
estate->es_trig_tuple_slot. Per report from Yoran Heling.
Back-patch to 9.0, when trigger WHEN conditions were introduced.
Now that we have a test that requires nondefault settings to pass, it seems
like we'd better mention that detail in the directions about how to run the
tests.
Also do some very minor copy-editing.
order of begin, prepare, and commit of three concurrent transactions that
have conflicts between them.
The test runs for a quite long time, and the expected output file is huge,
but this test caught some serious bugs during development, so seems
worthwhile to keep. The test uses prepared transactions, so it fails if the
server has max_prepared_transactions=0. Because of that, it's marked as
"ignore" in the schedule file.
Dan Ports
A PlaceHolderVar's expression might contain another, lower-level
PlaceHolderVar. If the outer PlaceHolderVar is used, the inner one
certainly will be also, and so we have to make sure that both of them get
into the placeholder_list with correct ph_may_need values during the
initial pre-scan of the query (before deconstruct_jointree starts).
We did this correctly for PlaceHolderVars appearing in the query quals,
but overlooked the issue for those appearing in the top-level targetlist;
with the result that nested placeholders referenced only in the targetlist
did not work correctly, as illustrated in bug #6154.
While at it, add some error checking to find_placeholder_info to ensure
that we don't try to create new placeholders after it's too late to do so;
they have to all be created before deconstruct_jointree starts.
Back-patch to 8.4 where the PlaceHolderVar mechanism was introduced.
The relevant backslash commands already exist, so we're just adding an
additional column. With this commit, all objects that have psql backslash
commands and accept comments should now display those comments at least
in verbose mode.
Josh Kupershmidt, with doc additions by me.
I broke this in commit 5da79169d3, which
was obviously insufficiently well tested. Add some regression tests
in the hope of making future slip-ups more likely to be noticed.
Previously, xpath() simply returned an empty array if the expression did
not yield a node set. This is useless for expressions that return scalars,
such as one with name() at the top level. Arrange to return the scalar
value as a single-element xml array, instead. (String values will be
suitably escaped.)
This change will also cause xpath_exists() to return true, not false,
for such expressions.
Florian Pflug, reviewed by Radoslaw Smogura
Without this it's possible for the output to not be legal XML, as
illustrated by the added regression test cases.
NB: this change will need to be called out as an incompatibility in the
9.2 release notes, since it's possible somebody was relying on the old
behavior, even though it's clearly wrong.
Florian Pflug, reviewed by Radoslaw Smogura
This requires a new shared catalog, pg_shseclabel.
Along the way, fix the security_label regression tests so that they
don't monkey with the labels of any pre-existing objects. This is
unlikely to matter in practice, since only the label for the "dummy"
provider was being manipulated. But this way still seems cleaner.
KaiGai Kohei, with fairly extensive hacking by me.
libxml reports some errors (like invalid xmlns attributes) via the error
handler hook, but still returns a success indicator to the library caller.
This causes us to miss some errors that are important to report. Since the
"generic" error handler hook doesn't know whether the message it's getting
is for an error, warning, or notice, stop using that and instead start
using the "structured" error handler hook, which gets enough information
to be useful.
While at it, arrange to save and restore the error handler hook setting in
each libxml-using function, rather than assuming we can set and forget the
hook. This should improve the odds of working nicely with third-party
libraries that also use libxml.
In passing, volatile-ize some local variables that get modified within
PG_TRY blocks. I noticed this while testing with an older gcc version
than I'd previously tried to compile xml.c with.
Florian Pflug and Tom Lane, with extensive review/testing by Noah Misch
Noah Misch diagnosed the buildfarm problems in the isolation tests
partly as failure to differentiate backends properly; the old code was
using backend IDs, which is not good enough because a new backend might
use an already used ID. Use PIDs instead.
Also, the code was purposely careless about other concurrent activity,
because it isn't expected; and in fact, it doesn't affect the vast
majority of the time. However, it can be observed that autovacuum can
block tables for long enough to cause sporadic failures. The new code
accounts for that by ignoring locks held by processes not explicitly
declared in our spec file.
Author: Noah Misch
The previous value of 20ms is dangerously close to the time actually
spent just waiting for the deadlock to happen, so on occasion it causes
the test to fail simply because the other session didn't get to run
early enough, not managing to cause the deadlock that needs to be
detected. With this new value, it's expected that most machines on
normal load will be able to pass the test.
Author: Noah Misch
These new files allow the new FK tests on isolationtester to pass on the
serializable and repeatable read isolation levels (which are untested
by the buildfarm).
Author: Kevin Grittner
Reviewed by Noah Misch
This is more SQL-spec-compliant, more easily extensible, and better
performing than the old method of inventing special variables.
Pavel Stehule, reviewed by Shigeru Hanada and David Wheeler
When an AccessShareLock, RowShareLock, or RowExclusiveLock is requested
on an unshared database relation, and we can verify that no conflicting
locks can possibly be present, record the lock in a per-backend queue,
stored within the PGPROC, rather than in the primary lock table. This
eliminates a great deal of contention on the lock manager LWLocks.
This patch also refactors the interface between GetLockStatusData() and
pg_lock_status() to be a bit more abstract, so that we don't rely so
heavily on the lock manager's internal representation details. The new
fast path lock structures don't have a LOCK or PROCLOCK structure to
return, so we mustn't depend on that for purposes of listing outstanding
locks.
Review by Jeff Davis.
Regular aggregate functions in combination with, or within the arguments
of, window functions are OK per spec; they have the semantics that the
aggregate output rows are computed and then we run the window functions
over that row set. (Thus, this combination is not really useful unless
there's a GROUP BY so that more than one aggregate output row is possible.)
The case without GROUP BY could fail, as recently reported by Jeff Davis,
because sloppy construction of the Agg node's targetlist resulted in extra
references to possibly-ungrouped Vars appearing outside the aggregate
function calls themselves. See the added regression test case for an
example.
Fixing this requires modifying the API of flatten_tlist and its underlying
function pull_var_clause. I chose to make pull_var_clause's API for
aggregates identical to what it was already doing for placeholders, since
the useful behaviors turn out to be the same (error, report node as-is, or
recurse into it). I also tightened the error checking in this area a bit:
if it was ever valid to see an uplevel Var, Aggref, or PlaceHolderVar here,
that was a long time ago, so complain instead of ignoring them.
Backpatch into 9.1. The failure exists in 8.4 and 9.0 as well, but seeing
that it only occurs in a basically-useless corner case, it doesn't seem
worth the risks of changing a function API in a minor release. There might
be third-party code using pull_var_clause.
This enables us to test that blocking commands (such as foreign keys
checks that conflict with some other lock) act as intended. The set of
tests that this adds is pretty minimal, but can easily be extended by
adding new specs.
The intention is that this will serve as a basis for ensuring that
further tweaks of locking implementation preserve (or improve) existing
behavior.
Author: Noah Misch
If there's a dangerous structure T0 ---> T1 ---> T2, and T2 commits first,
we need to abort something. If T2 commits before both conflicts appear,
then it should be caught by OnConflict_CheckForSerializationFailure. If
both conflicts appear before T2 commits, it should be caught by
PreCommit_CheckForSerializationFailure. But that is actually run when
T2 *prepares*. Fix that in OnConflict_CheckForSerializationFailure, by
treating a prepared T2 as if it committed already.
This is mostly a problem for prepared transactions, which are in prepared
state for some time, but also for regular transactions because they also go
through the prepared state in the SSI code for a short moment when they're
committed.
Kevin Grittner and Dan Ports
Unlike the relistemp field which it replaced, relpersistence must be
set correctly quite early during the table creation process, as we
rely on it quite early on for a number of purposes, including security
checks. Normally, this is set based on whether the user enters CREATE
TABLE, CREATE UNLOGGED TABLE, or CREATE TEMPORARY TABLE, but a
relation may also be made implicitly temporary by creating it in
pg_temp. This patch fixes the handling of that case, and also
disables creation of unlogged tables in temporary tablespace (such
table indeed skip WAL-logging, but we reject an explicit
specification) and creation of relations in the temporary schemas of
other sessions (which is not very sensible, and didn't work right
anyway).
Report by Amit Khandekar.
This means that they can initially be added to a large existing table
without checking its initial contents, but new tuples must comply to
them; a separate pass invoked by ALTER TABLE / VALIDATE can verify
existing data and ensure it complies with the constraint, at which point
it is marked validated and becomes a normal part of the table ecosystem.
An non-validated CHECK constraint is ignored in the planner for
constraint_exclusion purposes; when validated, cached plans are
recomputed so that partitioning starts working right away.
This patch also enables domains to have unvalidated CHECK constraints
attached to them as well by way of ALTER DOMAIN / ADD CONSTRAINT / NOT
VALID, which can later be validated with ALTER DOMAIN / VALIDATE
CONSTRAINT.
Thanks to Thom Brown, Dean Rasheed and Jaime Casanova for the various
reviews, and Robert Hass for documentation wording improvement
suggestions.
This patch was sponsored by Enova Financial.
Such a condition is unsatisfiable in combination with any other type of
btree-indexable condition (since we assume btree operators are always
strict). 8.3 and 8.4 had an explicit test for this, which I removed in
commit 29c4ad9829, mistakenly thinking that
the case would be subsumed by the more general handling of IS (NOT) NULL
added in that patch. Put it back, and improve the comments about it, and
add a regression test case.
Per bug #6079 from Renat Nasyrov, and analysis by Dean Rasheed.
already been marked as PREPARED cannot be killed. Kill the current
transaction instead.
One of the prepared_xacts regression tests actually hits this bug. I
removed the anomaly from the duplicate-gids test so that it fails in the
intended way, and added a new test to check serialization failures with
a prepared transaction.
Dan Ports
When recursing after an optimization in pull_up_sublinks_qual_recurse, the
available_rels value passed down must include only the relations that are
in the righthand side of the new SEMI or ANTI join; it's incorrect to pull
up a sub-select that refers to other relations, as seen in the added test
case. Per report from BangarRaju Vadapalli.
While at it, rethink the idea of recursing below a NOT EXISTS. That is
essentially the same situation as pulling up ANY/EXISTS sub-selects that
are in the ON clause of an outer join, and it has the same disadvantage:
we'd force the two joins to be evaluated according to the syntactic nesting
order, because the lower join will most likely not be able to commute with
the ANTI join. That could result in having to form a rather large join
product, whereas the handling of a correlated subselect is not quite that
dumb. So until we can handle those cases better, #ifdef NOT_USED that
case. (I think it's okay to pull up in the EXISTS/ANY cases, because SEMI
joins aren't so inflexible about ordering.)
Back-patch to 8.4, same as for previous patch in this area. Fortunately
that patch hadn't made it into any shipped releases yet.
Per recommendation from Peter. Neither choice is bulletproof, but this
is the existing style and it does help prevent unexpected environment
variable substitution.
Apparently there is no buildfarm critter exercising this case after all,
because it fails in several places. With this patch, build, install,
check-world, and installcheck-world pass for me on OS X.
This use-case was broken in commit 529cb267a6
of 2010-10-21, in which I commented "For the moment, we just forbid such
matching. We might later wish to insert an automatic downcast to the
underlying array type, but such a change should also change matching of
domains to ANYELEMENT for consistency". We still lack consensus about what
to do with ANYELEMENT; but not matching ANYARRAY is a clear loss of
functionality compared to prior releases, so let's go ahead and make that
happen. Per complaint from Regina Obe and extensive subsequent discussion.
Since the original implementation of CTEs only allowed them in SELECT
queries, the rule rewriter did not expect to find any CTEs in statements
being rewritten by ON INSERT/UPDATE/DELETE rules. We had dealt with this
to some extent but the code was still several bricks shy of a load, as
illustrated in bug #6051 from Jehan-Guillaume de Rorthais.
In particular, we have to be able to copy CTEs from the original query's
cteList into that of a rule action, in case the rule action references the
CTE (which it pretty much always will). This also implies we were doing
things in the wrong order in RewriteQuery: we have to recursively rewrite
the CTE queries before expanding the main query, so that we have the
rewritten queries available to copy.
There are unpleasant limitations yet to resolve here, but at least we now
throw understandable FEATURE_NOT_SUPPORTED errors for them instead of just
failing with bizarre implementation-dependent errors. In particular, we
can't handle propagating the same CTE into multiple post-rewrite queries
(because then the CTE would be evaluated multiple times), and we can't cope
with conflicts between CTE names in the original query and in the rule
actions.
This avoids an Assert failure when we try to use ordinary index fetches
while checking for exclusion conflicts. Per report from Noah Misch.
No need for back-patch because the Assert wasn't there before 9.1.
The existence of a btree opclass accepting composite types caused us to
assume that every composite type is sortable. This isn't true of course;
we need to check if the column types are all sortable. There was logic
for this for the case of array comparison (ie, check that the element
type is sortable), but we missed the point for rowtypes. Per Teodor's
report of an ANALYZE failure for an unsortable composite type.
Rather than just add some more ad-hoc logic for this, I moved knowledge of
the issue into typcache.c. The typcache will now only report out array_eq,
record_cmp, and friends as usable operators if the array or composite type
will work with those functions.
Unfortunately we don't have enough info to do this for anonymous RECORD
types; in that case, just assume it will work, and take the runtime failure
as before if it doesn't.
This patch might be a candidate for back-patching at some point, but
given the lack of complaints from the field, I'd rather just test it in
HEAD for now.
Note: most of the places touched in this patch will need further work
when we get around to supporting hashing of record types.
We need this now because we allow domains over arrays, and we'll probably
allow domains over composites pretty soon, which makes the problem even
more obvious.
Although domains over arrays also exist in previous versions, this does not
need to be back-patched, because the coding used in older versions
successfully "looked through" domains over arrays. The problem is exposed
by not treating a domain as having a typelem.
Problem identified by Noah Misch, though I did not use his patch, since
it would require additional work to handle domains over composites that
way. This approach is more future-proof.
On further analysis, it turns out that it is not needed to duplicate predicate
locks to the new row version at update, the lock on the version that the
transaction saw as visible is enough. However, there was a different bug in
the code that checks for dangerous structures when a new rw-conflict happens.
Fix that bug, and remove all the row-version chaining related code.
Kevin Grittner & Dan Ports, with some comment editorialization by me.
loop if it fails, which is what what happened on my HP-UX box. (I think
the reason it failed on that box is a misconfiguration on my behalf, but
that's no reason to hang.)
