This moves the code around from one huge file into hopefully logical
and more manageable modules. For the most part, the code itself was
not touched, except: PLy_function_handler and PLy_trigger_handler were
renamed to PLy_exec_function and PLy_exec_trigger, because they were
not actually handlers in the PL handler sense, and it makes the naming
more similar to the way PL/pgSQL is organized. The initialization of
the procedure caches was separated into a new function
init_procedure_caches to keep the hash tables private to
plpy_procedures.c.
Jan Urbański and Peter Eisentraut
Add a function plpy.cursor that is similar to plpy.execute but uses an
SPI cursor to avoid fetching the entire result set into memory.
Jan Urbański, reviewed by Steve Singer
In the previous coding, callers were faced with an awkward choice:
look up the name, do permissions checks, and then lock the table; or
look up the name, lock the table, and then do permissions checks.
The first choice was wrong because the results of the name lookup
and permissions checks might be out-of-date by the time the table
lock was acquired, while the second allowed a user with no privileges
to interfere with access to a table by users who do have privileges
(e.g. if a malicious backend queues up for an AccessExclusiveLock on
a table on which AccessShareLock is already held, further attempts
to access the table will be blocked until the AccessExclusiveLock
is obtained and the malicious backend's transaction rolls back).
To fix, allow callers of RangeVarGetRelid() to pass a callback which
gets executed after performing the name lookup but before acquiring
the relation lock. If the name lookup is retried (because
invalidation messages are received), the callback will be re-executed
as well, so we get the best of both worlds. RangeVarGetRelid() is
renamed to RangeVarGetRelidExtended(); callers not wishing to supply
a callback can continue to invoke it as RangeVarGetRelid(), which is
now a macro. Since the only one caller that uses nowait = true now
passes a callback anyway, the RangeVarGetRelid() macro defaults nowait
as well. The callback can also be used for supplemental locking - for
example, REINDEX INDEX needs to acquire the table lock before the index
lock to reduce deadlock possibilities.
There's a lot more work to be done here to fix all the cases where this
can be a problem, but this commit provides the general infrastructure
and fixes the following specific cases: REINDEX INDEX, REINDEX TABLE,
LOCK TABLE, and and DROP TABLE/INDEX/SEQUENCE/VIEW/FOREIGN TABLE.
Per discussion with Noah Misch and Alvaro Herrera.
The old expression sed 's,$(srcdir),python3,' would normally resolve
as sed 's,.,python3,', which is not really what we wanted. While it
doesn't actually break anything right now, it's still wrong, so put in
a bit more work to make it more robust.
The original coding was
var->value = (Datum) state;
which is bogus, and then in commit 2f0f7b4bce
it was "corrected" to
var->value = PointerGetDatum(state);
which is a faithful translation but still wrong.
This seems purely cosmetic, though, so no need for a back-patch.
Pavel Stehule
distro version of perl.
David Wheeler and Alex Hunsaker.
Backpatch to 9.1 where it applies cleanly. A simple workaround is available for earlier
branches, and further effort doesn't seem warranted.
exception handler. This was a regression in 9.1, when the capability
to catch specific SPI errors was added, so backpatch to 9.1.
Mika Eloranta, with some editing by Jan Urbański.
This seems to have been just an oversight in previous foreign-table work.
A quick grep didn't turn up any other places where RELKIND_FOREIGN_TABLE
was obviously omitted.
One change noted by Alexander Soudakov, the other by me.
Back-patch to 9.1.
The original implementation of ELSIF in plpgsql converted the construct
into nested simple IF statements. This was prone to stack overflow with
long ELSIF lists, in two different ways. First, it's difficult to generate
the parsetree without using right-recursion in the bison grammar, and
that's prone to parser stack overflow since nothing can be reduced until
the whole list has been read. Second, we'd recurse during execution, thus
creating an unnecessary risk of execution-time stack overflow. Rewrite
so that the ELSIF list is represented as a flat list, scanned via iteration
not recursion, and generated through left-recursion in the grammar.
Per a gripe from Håvard Kongsgård.
This patch restores the pre-9.1 behavior that pl/perl functions returning
VOID ignore the result value of their last Perl statement. 9.1.0
unintentionally threw an error if the last statement returned a reference,
as reported by Amit Khandekar.
Also, make sure it works to return a string value for a composite type,
so long as the string meets the type's input format. We already allowed
the equivalent behavior for arrays, so it seems inconsistent to not allow
it for composites.
In addition, ensure we throw errors for attempts to return arrays or hashes
when the function's declared result type is not an array or composite type,
respectively. Pre-9.1 versions rather uselessly returned strings like
ARRAY(0x221a9a0) or HASH(0x221aa90), while 9.1.0 threw an error for the
hash case and returned a garbage value for the array case.
Also, clean up assorted grotty coding in Perl array conversion, including
use of a session-lifespan memory context to accumulate the array value
(resulting in session-lifespan memory leak on error), failure to apply the
declared typmod if any, and failure to detect some cases of non-rectangular
multi-dimensional arrays.
Alex Hunsaker and Tom Lane
We used to just remember the GucSource, but saving GucContext too provides
a little more information --- notably, whether a SET was done by a
superuser or regular user. This allows us to rip out the fairly dodgy code
that define_custom_variable used to use to try to infer the context to
re-install a pre-existing setting with. In particular, it now works for
a superuser to SET a extension's SUSET custom variable before loading the
associated extension, because GUC can remember whether the SET was done as
a superuser or not. The plperl regression tests contain an example where
this is useful.
This variable provides only marginal error-prevention capability (since
it can only check the prefix of a qualified GUC name), and the consensus
is that that isn't worth the amount of hassle that maintaining the setting
creates for DBAs. So, let's just remove it.
With this commit, the system will silently accept a value for any qualified
GUC name at all, whether it has anything to do with any known extension or
not. (Unqualified names still have to match known built-in settings,
though; and you will get a WARNING at extension load time if there's an
unrecognized setting with that extension's prefix.)
There's still some discussion ongoing about whether to tighten that up and
if so how; but if we do come up with a solution, it's not likely to look
anything like custom_variable_classes.
plpgsql's exec_stmt_execsql was Assert'ing that a CachedPlanSource was
is_valid immediately after exec_prepare_plan. The risk factor in this case
is that after building the prepared statement, exec_prepare_plan calls
exec_simple_check_plan, which might try to generate a generic plan --- and
with CLOBBER_CACHE_ALWAYS or other unusual causes of invalidation, that
could result in an invalidation. However, that path could only be taken
for a SELECT query, for which we need not set mod_stmt. So in this case
I think it's best to just remove the Assert; it's okay to look at a
slightly-stale querytree for what we need here. Per buildfarm testing.
Now that a NULL ParamListInfo pointer causes significantly different
behavior in plancache.c, be sure to pass it that way when the expression
is known not to reference any plpgsql variables. Saves a few setup
cycles anyway.
Rewrite plancache.c so that a "cached plan" (which is rather a misnomer
at this point) can support generation of custom, parameter-value-dependent
plans, and can make an intelligent choice between using custom plans and
the traditional generic-plan approach. The specific choice algorithm
implemented here can probably be improved in future, but this commit is
all about getting the mechanism in place, not the policy.
In addition, restructure the API to greatly reduce the amount of extraneous
data copying needed. The main compromise needed to make that possible was
to split the initial creation of a CachedPlanSource into two steps. It's
worth noting in particular that SPI_saveplan is now deprecated in favor of
SPI_keepplan, which accomplishes the same end result with zero data
copying, and no need to then spend even more cycles throwing away the
original SPIPlan. The risk of long-term memory leaks while manipulating
SPIPlans has also been greatly reduced. Most of this improvement is based
on use of the recently-added MemoryContextSetParent primitive.
The $(PERL) macro will be set by configure if it finds perl at all,
but $(perl_privlibexp) isn't configured unless you said --with-perl.
This results in confusing error messages if someone cd's into
src/pl/plperl and tries to build there despite the configure omission,
as reported by Tomas Vondra in bug #6198. Add simple checks to
provide a more useful report, while not disabling other use of the
makefile such as "make clean".
Back-patch to 9.0, which is as far as the patch applies easily.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
Module initialization functions in Python 3 must have external
linkage, because PyMODINIT_FUNC does dllexport on Windows-like
platforms. Without this change, the build with Python 3 fails on
Windows.
Dropped columns within a composite type were not handled correctly.
Also, we did not check for whether a composite result type had changed
since we cached the information about it.
Jan Urbański, per a bug report from Jean-Baptiste Quenot
To avoid having the python headers hijack various definitions,
we now include them after all the system headers we want, having
first undefined some of the things they want to define. After that's
done we restore the things they scribbled on that matter, namely our
snprintf and vsnprintf macros, if we're using them.
This is more SQL-spec-compliant, more easily extensible, and better
performing than the old method of inventing special variables.
Pavel Stehule, reviewed by Shigeru Hanada and David Wheeler
There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
In the previous coding, we would look up a relation in RangeVarGetRelid,
lock the resulting OID, and then AcceptInvalidationMessages(). While
this was sufficient to ensure that we noticed any changes to the
relation definition before building the relcache entry, it didn't
handle the possibility that the name we looked up no longer referenced
the same OID. This was particularly problematic in the case where a
table had been dropped and recreated: we'd latch on to the entry for
the old relation and fail later on. Now, we acquire the relation lock
inside RangeVarGetRelid, and retry the name lookup if we notice that
invalidation messages have been processed meanwhile. Many operations
that would previously have failed with an error in the presence of
concurrent DDL will now succeed.
There is a good deal of work remaining to be done here: many callers
of RangeVarGetRelid still pass NoLock for one reason or another. In
addition, nothing in this patch guards against the possibility that
the meaning of an unqualified name might change due to the creation
of a relation in a schema earlier in the user's search path than the
one where it was previously found. Furthermore, there's nothing at
all here to guard against similar race conditions for non-relations.
For all that, it's a start.
Noah Misch and Robert Haas
Certain subdirectories do not get built if corresponding options are not
selected at configure time. However, "make distprep" should visit such
directories anyway, so that constructing derived files to be included in
the tarball happens without requiring all configure options to be given
in the tarball build script. Likewise, it's better if cleanup actions
unconditionally visit all directories (for example, this ensures proper
cleanup if someone has done a manual make in such a subdirectory).
To handle this, set up a convention that subdirectories that are
conditionally included in SUBDIRS should be added to ALWAYS_SUBDIRS
instead when they are excluded.
Back-patch to 9.1, so that plpython's spiexceptions.h will get provided
in 9.1 tarballs. There don't appear to be any instances where distprep
actions got missed in previous releases, and anyway this fix requires
gmake 3.80 so we don't want to apply it before 9.1.
Since the names try_relation_openrv() and try_heap_openrv() don't seem
quite appropriate, rename the functions to relation_openrv_extended()
and heap_openrv_extended(). This is also more general, if we have a
future need for additional parameters that are of interest to only a
few callers.
This is infrastructure for a forthcoming patch to allow
get_object_address() to take a missing_ok argument as well.
Patch by me, review by Noah Misch.
The --flag argument can be used to tell xgettext the arguments of
which functions should be flagged with c-format in the PO files,
instead of guessing based on the presence of format specifiers, which
fails if no format specifiers are present but the translation
accidentally introduces one.
Appropriate flag settings have been added for each message catalog.
based on a patch by Christoph Berg for bug #6066
Put gettext trigger words that are common to the backend and backend
modules into a makefile variable to include everywhere, to avoid
error-prone repetitions.
It currently doesn't make a difference, but it's inconsistent with
most other usage, and it might interfere with a future patch, so I'll
change it all in a separate commit.
Also, replace tabs with spaces for alignment.