Removing this bit from xl_info allows us to restore the old limit of four
(not three) separate pages touched by a WAL record, which is needed for the
upcoming SP-GiST feature, and will likely be useful elsewhere in future.
When we implemented XLR_BKP_REMOVABLE in 2007, we had to do it like that
because no special WAL-visible action was taken when starting a backup.
However, now we force a segment switch when starting a backup, so a
compressing WAL archiver (such as pglesslog) that uses the state shown in
the current page header will not be fooled as to removability of backup
blocks. The only downside is that the archiver will not return to
compressing mode for up to one WAL page after the backup is over, which is
a small price to pay for getting back the extra xl_info bit. In any case
the archiver could look for XLOG_BACKUP_END records if it thought it was
worth the trouble to do so.
Bump XLOG_PAGE_MAGIC since this is effectively a change in WAL format.
we don't reach consistency before replaying all of the WAL. Rename the
variable to reachedConsistency, to make its intention clearer.
In master, that was an active bug because of the recent patch to
immediately PANIC if a reference to a missing page is found in WAL after
reaching consistency, as Tom Lane's test case demonstrated. In 9.1 and 9.0,
the only consequence was a misleading "consistent recovery state reached at
%X/%X" message in the log at the beginning of crash recovery (the database
is not consistent at that point yet). In 8.4, the log message was not
printed in crash recovery, even though there was a similar
reachedMinRecoveryPoint local variable that was also set early. So,
backpatch to 9.1 and 9.0.
invalid-page hash table, PANIC immediately. Immediate PANIC is much better
than waiting for end-of-recovery, which is what we did before, because the
end-of-recovery might not come until months later if this is a standby
server.
Also refrain from creating a restartpoint if there are invalid-page entries
in the hash table. Restarting recovery from such a restartpoint would not
see the invalid references, and wouldn't be able to cross-check them when
consistency is reached. That wouldn't matter when things are going smoothly,
but the more sanity checks you have the better.
Fujii Masao
Previously we waited for wal_writer_delay before flushing WAL. Now
we also wake WALWriter as soon as a WAL buffer page has filled.
Significant effect observed on performance of asynchronous commits
by Robert Haas, attributed to the ability to set hint bits on tuples
earlier and so reducing contention caused by clog lookups.
Previously, we skipped a checkpoint if no WAL had been written since
last checkpoint, though this does not appear in user documentation.
As of now, we skip a checkpoint until we have written at least one
enough WAL to switch the next WAL file. This greatly reduces the
level of activity and number of WAL messages generated by a very
low activity server. This is safe because the purpose of a checkpoint
is to act as a starting place for a recovery, in case of crash.
This patch maintains minimal WAL volume for replay in case of crash,
thus maintaining very low crash recovery time.
There was a timing window between when oldestActiveXid was derived
and when it should have been derived that only shows itself under
heavy load. Move code around to ensure correct timing of derivation.
No change to StartupSUBTRANS() code, which is where this failed.
Bug report by Chris Redekop
A transaction can export a snapshot with pg_export_snapshot(), and then
others can import it with SET TRANSACTION SNAPSHOT. The data does not
leave the server so there are not security issues. A snapshot can only
be imported while the exporting transaction is still running, and there
are some other restrictions.
I'm not totally convinced that we've covered all the bases for SSI (true
serializable) mode, but it works fine for lesser isolation modes.
Joachim Wieland, reviewed by Marko Tiikkaja, and rather heavily modified
by Tom Lane
This is merely an exercise in satisfying pedants, not a bug fix, because
in every case we were checking for failure later with ferror(), or else
there was nothing useful to be done about a failure anyway. Document
the latter cases.
This patch has two distinct purposes: to report multiple problems in
postgresql.conf rather than always bailing out after the first one,
and to change the policy for whether changes are applied when there are
unrelated errors in postgresql.conf.
Formerly the policy was to apply no changes if any errors could be
detected, but that had a significant consistency problem, because in some
cases specific values might be seen as valid by some processes but invalid
by others. This meant that the latter processes would fail to adopt
changes in other parameters even though the former processes had done so.
The new policy is that during SIGHUP, the file is rejected as a whole
if there are any errors in the "name = value" syntax, or if any lines
attempt to set nonexistent built-in parameters, or if any lines attempt
to set custom parameters whose prefix is not listed in (the new value of)
custom_variable_classes. These tests should always give the same results
in all processes, and provide what seems a reasonably robust defense
against loading values from badly corrupted config files. If these tests
pass, all processes will apply all settings that they individually see as
good, ignoring (but logging) any they don't.
In addition, the postmaster does not abandon reading a configuration file
after the first syntax error, but continues to read the file and report
syntax errors (up to a maximum of 100 syntax errors per file).
The postmaster will still refuse to start up if the configuration file
contains any errors at startup time, but these changes allow multiple
errors to be detected and reported before quitting.
Alexey Klyukin, reviewed by Andy Colson and av (Alexander ?)
with some additional hacking by Tom Lane
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
In pursuit of this (and with the expectation that WaitLatch will be needed
in more places), convert the latch field that was already added to PGPROC
for sync rep into a generic latch that is activated for all PGPROC-owning
processes, and change many of the standard backend signal handlers to set
that latch when a signal happens. This will allow WaitLatch callers to be
wakened properly by these signals.
In passing, fix a whole bunch of signal handlers that had been hacked to do
things that might change errno, without adding the necessary save/restore
logic for errno. Also make some minor fixes in unix_latch.c, and clean
up bizarre and unsafe scheme for disowning the process's latch. Much of
this has to be back-patched into 9.1.
Peter Geoghegan, with additional work by Tom
streamed backup, throw an error and refuse to start up. The restore has not
finished correctly in that case and the data directory is possibly corrupt.
We already errored out in case of archive recovery, but could not during
crash recovery because we couldn't distinguish between the case that
pg_start_backup() was called and the database then crashed (must not error,
data is OK), and the case that we're restoring from a backup and not all
the needed WAL was replayed (data can be corrupt).
To distinguish those cases, add a line to backup_label to indicate
whether the backup was taken with pg_start/stop_backup(), or by streaming
(ie. pg_basebackup).
This requires re-initdb, because of a new field added to the control file.
The original definition had the problem that timeouts exceeding about 2100
seconds couldn't be specified on 32-bit machines. Milliseconds seem like
sufficient resolution, and finer grain than that would be fantasy anyway
on many platforms.
Back-patch to 9.1 so that this aspect of the latch API won't change between
9.1 and later releases.
Peter Geoghegan
Standby servers can now have WALSender processes, which can work with
either WALReceiver or archive_commands to pass data. Fully updated
docs, including new conceptual terms of sending server, upstream and
downstream servers. WALSenders terminated when promote to master.
Fujii Masao, review, rework and doc rewrite by Simon Riggs
detect postmaster death. Postmaster keeps the write-end of the pipe open,
so when it dies, children get EOF in the read-end. That can conveniently
be waited for in select(), which allows eliminating some of the polling
loops that check for postmaster death. This patch doesn't yet change all
the loops to use the new mechanism, expect a follow-on patch to do that.
This changes the interface to WaitLatch, so that it takes as argument a
bitmask of events that it waits for. Possible events are latch set, timeout,
postmaster death, and socket becoming readable or writeable.
The pipe method behaves slightly differently from the kill() method
previously used in PostmasterIsAlive() in the case that postmaster has died,
but its parent has not yet read its exit code with waitpid(). The pipe
returns EOF as soon as the process dies, but kill() continues to return
true until waitpid() has been called (IOW while the process is a zombie).
Because of that, change PostmasterIsAlive() to use the pipe too, otherwise
WaitLatch() would return immediately with WL_POSTMASTER_DEATH, while
PostmasterIsAlive() would claim it's still alive. That could easily lead to
busy-waiting while postmaster is in zombie state.
Peter Geoghegan with further changes by me, reviewed by Fujii Masao and
Florian Pflug.
XLOG_XACT_COMMIT_COMPACT leaves out invalidation messages and relfilenodes,
saving considerable space for the vast majority of transaction commits.
XLOG_XACT_COMMIT keeps same definition as XLOG_PAGE_MAGIC 0xD067 and earlier.
Leonardo Francalanci and Simon Riggs
This involves two main changes from the previous behavior. First,
when we set a bit in the visibility map, emit a new WAL record of type
XLOG_HEAP2_VISIBLE. Replay sets the page-level PD_ALL_VISIBLE bit and
the visibility map bit. Second, when inserting, updating, or deleting
a tuple, we can no longer get away with clearing the visibility map
bit after releasing the lock on the corresponding heap page, because
an intervening crash might leave the visibility map bit set and the
page-level bit clear. Making this work requires a bit of interface
refactoring.
In passing, a few minor but related cleanups: change the test in
visibilitymap_set and visibilitymap_clear to throw an error if the
wrong page (or no page) is pinned, rather than silently doing nothing;
this case should never occur. Also, remove duplicate definitions of
InvalidXLogRecPtr.
Patch by me, review by Noah Misch.
ReadRecord's habit of using both direct references to tmpRecPtr and
references to *RecPtr (which is pointing at tmpRecPtr) triggers an
optimization bug in gcc 4.6.0, which apparently has forgotten about
aliasing rules. Avoid the compiler bug, and make the code more readable
to boot, by getting rid of the direct references. Improve the comments
while at it.
Back-patch to all supported versions, in case they get built with 4.6.0.
Tom Lane, with some cosmetic suggestions from Alex Hunsaker
Before commit c016ce7281, this wasn't
needed, but now that multiple resource manager IDs can percolate down
through here, we have to make sure we know which one we've got.
Otherwise, we can confuse (for example) an XLOG_XACT_COMMIT record
with an XLOG_CHECKPOINT_SHUTDOWN record.
Review by Jaime Casanova
crash recovery, and throw an error if not. hubert depesz lubaczewski pointed
out that that situation also happens in the crash recovery following a
system crash that happens during an online backup.
We might want to do something smarter in 9.1, like put the check back for
backups taken with pg_basebackup, but that's for another patch.
The previous functions of assign hooks are now split between check hooks
and assign hooks, where the former can fail but the latter shouldn't.
Aside from being conceptually clearer, this approach exposes the
"canonicalized" form of the variable value to guc.c without having to do
an actual assignment. And that lets us fix the problem recently noted by
Bernd Helmle that the auto-tune patch for wal_buffers resulted in bogus
log messages about "parameter "wal_buffers" cannot be changed without
restarting the server". There may be some speed advantage too, because
this design lets hook functions avoid re-parsing variable values when
restoring a previous state after a rollback (they can store a pre-parsed
representation of the value instead). This patch also resolves a
longstanding annoyance about custom error messages from variable assign
hooks: they should modify, not appear separately from, guc.c's own message
about "invalid parameter value".
archive recovery.
It's possible to restore an online backup without recovery.conf, by simply
copying all the necessary WAL files to pg_xlog. "pg_basebackup -x" does that
too. That's the use case where this cross-check is useful.
Backpatch to 9.0. We used to do this in earlier versins, but in 9.0 the code
was inadvertently changed so that the check is only performed after archive
recovery.
Fujii Masao.
Change location LOG message so it works each time we pause, not
just for final pause.
Ensure that we pause only if we are in Hot Standby and can connect
to allow us to run resume function. This change supercedes the
code to override parameter recoveryPauseAtTarget to false if not
attempting to enter Hot Standby, which is now removed.
Startup process waited for cleanup lock but when hot_standby = off
the pid was not registered, so that the bgwriter would not wake
the waiting process as intended.
ensure that they use different checkpoints as the starting point. We use
the checkpoint redo location as a unique identifier for the base backup in
the end-of-backup record, and in the backup history file name.
Bug spotted by Fujii Masao.
than doing it aggressively whenever the tail-XID pointer is advanced, because
this way we don't need to do it while holding SerializableXactHashLock.
This also fixes bug #5915 spotted by YAMAMOTO Takashi, and removes an
obsolete comment spotted by Kevin Grittner.
periodically rescan the archive for new timelines, while waiting for new WAL
segments to arrive. This allows you to set up a standby server that follows
the TLI change if another standby server is promoted to master. Before this,
you had to restart the standby server to make it notice the new timeline.
This patch only scans the archive for TLI changes, it won't follow a TLI
change in streaming replication. That is much needed too, but it would be a
much bigger patch than I dare to sneak in this late in the release cycle.
There was discussion on improving the sanity checking of the WAL segments so
that the system would notice more reliably if the new timeline isn't an
ancestor of the current one, but that is not included in this patch.
Reviewed by Fujii Masao.
Emit a log message when creating a named restore point, and improve
documentation for pg_create_restore_point().
Euler Taveira de Oliveira, per suggestions from Thom Brown, with some
additional wordsmithing by me.
Standby optionally sends back information about oldestXmin of queries
which is then checked and applied to the WALSender's proc->xmin.
GetOldestXmin() is modified slightly to agree with GetSnapshotData(),
so that all backends on primary include WALSender within their snapshots.
Note this does nothing to change the snapshot xmin on either master or
standby. Feedback piggybacks on the standby reply message.
vacuum_defer_cleanup_age is no longer used on standby, though parameter
still exists on primary, since some use cases still exist.
Simon Riggs, review comments from Fujii Masao, Heikki Linnakangas, Robert Haas
though must not update the last transaction timestamp.
Plus comment and message cleanup for recent named restore point.
Fujii Masao, minor changes by me