I broke it in a previous commit because I neglected to install the
necessary incantations to have getopt() work on Windows.
Per red blots in buildfarm.
Both dict_int and dict_xsyn were blithely assuming that whatever memory
palloc gives back will be pre-zeroed. This would typically work for
just about long enough to run their regression tests, and no longer :-(.
The pre-9.0 code in dict_xsyn was even lamer than that, as it would
happily give back a pointer to the result of palloc(0), encouraging
its caller to access off the end of memory. Again, this would just
barely fail to fail as long as memory contained nothing but zeroes.
Per a report from Rodrigo Hjort that code based on these examples
didn't work reliably.
inline_set_returning_function failed to distinguish functions returning
generic RECORD (which require a column list in the RTE, as well as run-time
type checking) from those with multiple OUT parameters (which do not).
This prevented inlining from happening. Per complaint from Jay Levitt.
Back-patch to 8.4 where this capability was introduced.
This mode prints out the permutations that would be run by the given
spec file, in the same format used by the permutation lines in spec
files. This helps in building new spec files.
Author: Alexander Shulgin, with some tweaks by me
Instead of filling files as they appear, pre-pad the
WAL files received when streaming xlog the same way
that the server does. Data is streamed into a .partial
file which is then renamed()d into palce when it's complete,
but it will always be 16MB.
This also means that the starting position for pg_receivexlog
is now simply right after the last complete segment, and we
never need to deal with partial segments there.
Patch by me, review by Fujii Masao
If we use a PlaceHolderVar from the outer relation in an inner indexscan,
we need to reference the PlaceHolderVar as such as the value to be passed
in from the outer relation. The previous code effectively tried to
reconstruct the PHV from its component expression, which doesn't work since
(a) the Vars therein aren't necessarily bubbled up far enough, and (b) it
would be the wrong semantics anyway because of the possibility that the PHV
is supposed to have gone to null at some point before the current join.
Point (a) led to "variable not found in subplan target list" planner
errors, but point (b) would have led to silently wrong answers.
Per report from Roger Niederland.
If we have an inequality key that constrains the other end of the index,
it doesn't directly help us in doing the initial positioning ... but it
does imply a NOT NULL constraint on the index column. If the index stores
nulls at this end, we can use the implied NOT NULL condition for initial
positioning, just as if it had been stated explicitly. This avoids wasting
time when there are a lot of nulls in the column. This is the reverse of
the examples given in bugs #6278 and #6283, which were about failing to
stop early when we encounter nulls at the end of the indexscan.
As pointed out by Naoya Anzai, my previous try at this was a few bricks
shy of a load, because I had forgotten that the initial-positioning logic
might not try to skip over nulls at the end of the index the scan will
start from. We ought to fix that, because it represents an unnecessary
inefficiency, but first let's get the scan-stop logic back to a safe
state. With this patch, we preserve the performance benefit requested
in bug #6278 for the case of scanning forward into NULLs (in a NULLS
LAST index), but the reverse case of scanning backward across NULLs
when there's no suitable initial-positioning qual is still inefficient.
Previously, we skipped a checkpoint if no WAL had been written since
last checkpoint, though this does not appear in user documentation.
As of now, we skip a checkpoint until we have written at least one
enough WAL to switch the next WAL file. This greatly reduces the
level of activity and number of WAL messages generated by a very
low activity server. This is safe because the purpose of a checkpoint
is to act as a starting place for a recovery, in case of crash.
This patch maintains minimal WAL volume for replay in case of crash,
thus maintaining very low crash recovery time.
There was a timing window between when oldestActiveXid was derived
and when it should have been derived that only shows itself under
heavy load. Move code around to ensure correct timing of derivation.
No change to StartupSUBTRANS() code, which is where this failed.
Bug report by Chris Redekop
If the initial snapshot had overflowed then we can start whenever
the latest snapshot is empty, not overflowed or as we did already,
start when the xmin on primary was higher than xmax of our starting
snapshot, which proves we have full snapshot data.
Bug report by Chris Redekop
In assert-enabled builds, we assert during the shutdown sequence that
the queues have been properly emptied, and during process startup that
we are inheriting empty queues. In non-assert enabled builds, we just
save a few cycles.
This allows us to give correct syntax error pointers when complaining
about ungrouped variables in a join query with aggregates or GROUP BY.
It's pretty much irrelevant for the planner's use of the function, though
perhaps it might aid debugging sometimes.
If a tuple in a syscache contains an out-of-line toasted field, and we
try to fetch that field shortly after some other transaction has committed
an update or deletion of the tuple, there is a race condition: vacuum
could come along and remove the toast tuples before we can fetch them.
This leads to transient failures like "missing chunk number 0 for toast
value NNNNN in pg_toast_2619", as seen in recent reports from Andrew
Hammond and Tim Uckun.
The design idea of syscache is that access to stale syscache entries
should be prevented by relation-level locks, but that fails for at least
two cases where toasted fields are possible: ANALYZE updates pg_statistic
rows without locking out sessions that might want to plan queries on the
same table, and CREATE OR REPLACE FUNCTION updates pg_proc rows without
any meaningful lock at all.
The least risky fix seems to be an idea that Heikki suggested when we
were dealing with a related problem back in August: forcibly detoast any
out-of-line fields before putting a tuple into syscache in the first place.
This avoids the problem because at the time we fetch the parent tuple from
the catalog, we should be holding an MVCC snapshot that will prevent
removal of the toast tuples, even if the parent tuple is outdated
immediately after we fetch it. (Note: I'm not convinced that this
statement holds true at every instant where we could be fetching a syscache
entry at all, but it does appear to hold true at the times where we could
fetch an entry that could have a toasted field. We will need to be a bit
wary of adding toast tables to low-level catalogs that don't have them
already.) An additional benefit is that subsequent uses of the syscache
entry should be faster, since they won't have to detoast the field.
Back-patch to all supported versions. The problem is significantly harder
to reproduce in pre-9.0 releases, because of their willingness to flush
every entry in a syscache whenever the underlying catalog is vacuumed
(cf CatalogCacheFlushRelation); but there is still a window for trouble.
bgwriter is now a much less important process, responsible for page
cleaning duties only. checkpointer is now responsible for checkpoints
and so has a key role in shutdown. Later patches will correct doc
references to the now old idea that bgwriter performs checkpoints.
Has beneficial effect on performance at high write rates, but mainly
refactoring to more easily allow changes for power reduction by
simplifying previously tortuous code around required to allow page
cleaning and checkpointing to time slice in the same process.
Patch by me, Review by Dickson Guedes
The existing scan-direction-sensitive tests were overly complex, and
failed to stop the scan in cases where it's perfectly legitimate to do so.
Per bug #6278 from Maksym Boguk.
Back-patch to 8.3, which is as far back as the patch applies easily.
Doesn't seem worth sweating over a relatively minor performance issue in
8.2 at this late date. (But note that this was a performance regression
from 8.1 and before, so 8.2 is being left as an outlier.)
The POSIX spec defines locale fields for controlling the ordering of the
value, sign, and currency symbol in monetary output, but cash_out only
supported a small subset of these options. Fully implement p/n_sign_posn,
p/n_cs_precedes, and p/n_sep_by_space per spec. Fix up cash_in so that
it will accept all these format variants.
Also, make sure that thousands_sep is only inserted to the left of the
decimal point, as required by spec.
Per bug #6144 from Eduard Kracmar and discussion of bug #6277. This patch
includes some ideas from Alexander Lakhin's proposed patch, though it is
very different in detail.
Make sure that it considers all the possibilities that the old code did,
instead of trying only one possibility per character position. To keep the
runtime in bounds, instead tweak the character incrementers to not try
every possible multibyte character code. Remove unnecessary logic to
restore the old character value on failure. Additional comment and
formatting cleanup.
cash_out failed to handle multiple-byte thousands separators, as per bug
#6277 from Alexander Law. In addition, cash_in didn't handle that either,
nor could it handle multiple-byte positive_sign. Both routines failed to
support multiple-byte mon_decimal_point, which I did not think was worth
changing, but at least now they check for the possibility and fall back to
using '.' rather than emitting invalid output. Also, make cash_in handle
trailing negative signs, which formerly it would reject. Since cash_out
generates trailing negative signs whenever the locale tells it to, this
last omission represents a fail-to-reload-dumped-data bug. IMO that
justifies patching this all the way back.
This infrastructure doesn't in any way guarantee that the character
we produce will sort before the one we incremented; but it does at least
make it much more likely that we'll end up with something that is a valid
character, which improves our chances.
Kyotaro Horiguchi, with various adjustments by me.
We need not wait until the commit record is durably on disk, because
in the event of a crash the page we're updating with hint bits will
be gone anyway. Per off-list report from Heikki Linnakangas, this
can significantly degrade the performance of unlogged tables; I was
able to show a 2x speedup from this patch on a pgbench run with scale
factor 15. In practice, this will mostly help small, heavily updated
tables, because on larger tables you're unlikely to run into the same
row again before the commit record makes it out to disk.
Make sure ecpg/include/ is rebuilt before the other subdirectories,
so that ecpg_config.h is up to date. This is not likely to matter
during production builds, only development, so no back-patch.
one lock per backend or auxiliary process - the need for a lock for each
aux processes was not accounted for in NumLWLocks(). No-one noticed,
because the three locks needed for the three aux processes fit into the
few extra lwlocks we allocate for 3rd party modules that don't call
RequestAddinLWLocks() (NUM_USER_DEFINED_LWLOCKS, 4 by default).
Alvaro Herrera
Tom Lane
Andrew Dunstan
Bruce Momjian
Magnus Hagander
Heikki Linnakangas
Simon Riggs
Robert Haas
Peter Eisentraut