Reviewed-by: Ali Dar <ali.munir.dar@gmail.com>
Reviewed-by: Amit Khandekar <amit.khandekar@enterprisedb.com>
Reviewed-by: Rodolfo Campero <rodolfo.campero@anachronics.com>
Change SET LOCAL/CONSTRAINTS/TRANSACTION behavior outside of a
transaction block from error (post-9.3) to warning. (Was nothing in <=
9.3.) Also change ABORT outside of a transaction block from notice to
warning.
ECPG is not supposed to allow and output nested comments in C. These comments
are only allowed in the SQL parts and must not be written into the C file.
Also the different handling of different comments is documented.
This patch adds the ability to write TABLE( function1(), function2(), ...)
as a single FROM-clause entry. The result is the concatenation of the
first row from each function, followed by the second row from each
function, etc; with NULLs inserted if any function produces fewer rows than
others. This is believed to be a much more useful behavior than what
Postgres currently does with multiple SRFs in a SELECT list.
This syntax also provides a reasonable way to combine use of column
definition lists with WITH ORDINALITY: put the column definition list
inside TABLE(), where it's clear that it doesn't control the ordinality
column as well.
Also implement SQL-compliant multiple-argument UNNEST(), by turning
UNNEST(a,b,c) into TABLE(unnest(a), unnest(b), unnest(c)).
The SQL standard specifies TABLE() with only a single function, not
multiple functions, and it seems to require an implicit UNNEST() which is
not what this patch does. There may be something wrong with that reading
of the spec, though, because if it's right then the spec's TABLE() is just
a pointless alternative spelling of UNNEST(). After further review of
that, we might choose to adopt a different syntax for what this patch does,
but in any case this functionality seems clearly worthwhile.
Andrew Gierth, reviewed by Zoltán Böszörményi and Heikki Linnakangas, and
significantly revised by me
Formerly the planner had a hard-wired rule of thumb for guessing the amount
of space consumed by an aggregate function's transition state data. This
estimate is critical to deciding whether it's OK to use hash aggregation,
and in many situations the built-in estimate isn't very good. This patch
adds a column to pg_aggregate wherein a per-aggregate estimate can be
provided, overriding the planner's default, and infrastructure for setting
the column via CREATE AGGREGATE.
It may be that additional smarts will be required in future, perhaps even
a per-aggregate estimation function. But this is already a step forward.
This is extracted from a larger patch to improve the performance of numeric
and int8 aggregates. I (tgl) thought it was worth reviewing and committing
this infrastructure separately. In this commit, all built-in aggregates
are given aggtransspace = 0, so no behavior should change.
Hadi Moshayedi, reviewed by Pavel Stehule and Tomas Vondra
Pending patches for logical replication will use this to determine
which columns of a tuple ought to be considered as its candidate key.
Andres Freund, with minor, mostly cosmetic adjustments by me
These things didn't work because the planner omitted to do the necessary
preprocessing of a WindowFunc's argument list. Add the few dozen lines
of code needed to handle that.
Although this sounds like a feature addition, it's really a bug fix because
the default-argument case was likely to crash previously, due to lack of
checking of the number of supplied arguments in the built-in window
functions. It's not a security issue because there's no way for a
non-superuser to create a window function definition with defaults that
refers to a built-in C function, but nonetheless people might be annoyed
that it crashes rather than producing a useful error message. So
back-patch as far as the patch applies easily, which turns out to be 9.2.
I'll put a band-aid in earlier versions as a separate patch.
(Note that these features still don't work for aggregates, and fixing that
case will be harder since we represent aggregate arg lists as target lists
not bare expression lists. There's no crash risk though because CREATE
AGGREGATE doesn't accept defaults, and we reject named-argument notation
when parsing an aggregate call.)
For rather inscrutable reasons, SQL:2008 disallows copying-and-modifying a
window definition that has any explicit framing clause. The error message
we gave for this only made sense if the referencing window definition
itself contains an explicit framing clause, which it might well not.
Moreover, in the context of an OVER clause it's not exactly obvious that
"OVER (windowname)" implies copy-and-modify while "OVER windowname" does
not. This has led to multiple complaints, eg bug #5199 from Iliya
Krapchatov. Change to a hopefully more intelligible error message, and
in the case where we have just "OVER (windowname)", add a HINT suggesting
that omitting the parentheses will fix it. Also improve the related
documentation. Back-patch to all supported branches.
These variables no longer have any useful purpose, since there's no reason
to special-case brute force timezones now that we have a valid
session_timezone setting for them. Remove the variables, and remove the
SET/SHOW TIME ZONE code that deals with them.
The user-visible impact of this is that SHOW TIME ZONE will now show a
POSIX-style zone specification, in the form "<+-offset>-+offset", rather
than an interval value when a brute-force zone has been set. While perhaps
less intuitive, this is a better definition than before because it's
actually possible to give that string back to SET TIME ZONE and get the
same behavior, unlike what used to happen.
We did not previously mention the angle-bracket syntax when describing
POSIX timezone specifications; add some documentation so that people
can figure out what these strings do. (There's still quite a lot of
undocumented functionality there, but anybody who really cares can
go read the POSIX spec to find out about it. In practice most people
seem to prefer Olsen-style city names anyway.)
SGML documentation, as well as code comments, failed to note that an FDW's
validator will be applied to foreign-table options for foreign tables using
the FDW.
Etsuro Fujita
We don't need two index entries for lo_create pointing at the same section.
It's a bit pedantic for the toolchain to warn about this, but warn it does.
With these, one need no longer manipulate large object descriptors and
extract numeric constants from header files in order to read and write
large object contents from SQL.
Pavel Stehule, reviewed by Rushabh Lathia.
Move random() and setseed() to a separate table, to have them grouped
together. Also add a notice that random() is not cryptographically secure.
Original patch by Honza Horak, although I didn't use his version.
Add a makefile rule for building PDFs with FOP. Two new build targets
in doc/src/sgml are postgres-A4-fop.pdf and postgres-US-fop.pdf.
Run .fo output through xmllint for reformatting, so that errors are
easier to find. (The default output has hardly any line breaks, so you
might be looking for an error in column 20000.)
Set some XSLT parameters to optimize for building with FOP.
Remove some redundant or somewhat useless chapterinfo/author
information, because it renders strangely with the FO stylesheet.
Reviewed-by: Álvaro Herrera <alvherre@2ndquadrant.com>
Previously, unless all columns were auto-updateable, we wouldn't
inserts, updates, or deletes, or at least not without a rule or trigger;
now, we'll allow inserts and updates that target only the auto-updateable
columns, and deletes even if there are no auto-updateable columns at
all provided the view definition is otherwise suitable.
Dean Rasheed, reviewed by Marko Tiikkaja
Although previously-introduced APIs allow the process that registers a
background worker to obtain the worker's PID, there's no way to prevent
a worker that is not currently running from being restarted. This
patch introduces a new API TerminateBackgroundWorker() that prevents
the background worker from being restarted, terminates it if it is
currently running, and causes it to be unregistered if or when it is
not running.
Patch by me. Review by Michael Paquier and KaiGai Kohei.
Development of IRIX has been discontinued, and support is scheduled
to end in December of 2013. Therefore, there will be no supported
versions of this operating system by the time PostgreSQL 9.4 is
released. Furthermore, we have no maintainer for this platform.
The default table of contents in the XSLT HTML build is much too big and
deep. Configure it to look more like the one that is currently being
produced by the DSSSL build.
All of these platforms are very much obsolete.
As far as I can determine, the last version of SINIX, later renamed
Reliant, occurred some time between 2002 and 2005.
The last release of SunOS that would run on a sun3 was released in
November of 1991; the last release of OpenBSD which supported that
platform was in 2001. The highest clock speed of any processor in
the family was 25MHz.
The NS32K (national semiconductor 320xx) architecture was retired
in 1990.
Support can be re-added if a maintainer emerges for any of these
platforms, but it seems unlikely.
Reviewed by Andres Freund.
The XSLT toolchain requires an empty <index> element where the index is
supposed to appear. Add that with conditionals to hide it from the
DSSSL build.
The previous plan of having the check-tabs target a prerequisite of
"all" and "distprep" caused make distcheck to fail because make -q
distprep would never be satisfied. Put check-tabs into the html target
instead, so it is only called when a build actually happens.
make maintainer-check was obscure and rarely called in practice, and
many breakages were missed. Fold everything that make maintainer-check
used to do into the normal build. Specifically:
- Call duplicate_oids when genbki.pl is called.
- Check for tabs in SGML files when the documentation is built.
- Run msgfmt with the -c option during the regular build. Add an
additional configure check to see whether we are using the GNU
version. (make maintainer-check probably used to fail with non-GNU
msgfmt.)
Keep maintainer-check as around as phony target for the time being in
case anyone is calling it. But it won't do anything anymore.
Change the input/output format to {A,B,C}, to match the internal
representation.
Complete the implementations of line_in, line_out, line_recv, line_send.
Remove comments and error messages about the line type not being
implemented. Add regression tests for existing line operators and
functions.
Reviewed-by: rui hua <365507506hua@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Jeevan Chalke <jeevan.chalke@enterprisedb.com>
REFRESH MATERIALIZED VIEW CONCURRENTLY was broken for any matview
containing a column of a type without a default btree operator
class. It also did not produce results consistent with a non-
concurrent REFRESH or a normal view if any column was of a type
which allowed user-visible differences between values which
compared as equal according to the type's default btree opclass.
Concurrent matview refresh was modified to use the new operators
to solve these problems.
Documentation was added for record comparison, both for the
default btree operator class for record, and the newly added
operators. Regression tests now check for proper behavior both
for a matview with a box column and a matview containing a citext
column.
Reviewed by Steve Singer, who suggested some of the doc language.
Peter Eisentraut
Bruce Momjian
Kevin Grittner
Michael Meskes
Fujii Masao
Tom Lane
Robert Haas
Noah Misch
Heikki Linnakangas
Andrew Dunstan