It is equivalent in ANSI C to write (*funcptr) () and funcptr(). These
two styles have been applied inconsistently. After discussion, we'll
use the more verbose style for plain function pointer variables, to make
it clear that it's a variable, and the shorter style when the function
pointer is in a struct (s.func() or s->func()), because then it's clear
that it's not a plain function name, and otherwise the excessive
punctuation makes some of those invocations hard to read.
Discussion: https://www.postgresql.org/message-id/f52c16db-14ed-757d-4b48-7ef360b1631d@2ndquadrant.com
Commit 3eb9a5e7c unintentionally introduced an ordering dependency
into restore_toc_entries_prefork(). The existing coding of
reduce_dependencies() contains a check to skip moving a TOC entry
to the ready_list if it wasn't initially in the pending_list.
This used to suffice to prevent reduce_dependencies() from trying to
move anything into the ready_list during restore_toc_entries_prefork(),
because the pending_list stayed empty throughout that phase; but it no
longer does. The problem doesn't manifest unless the TOC has been
reordered by SortTocFromFile, which is how I missed it in testing.
To fix, just add a test for ready_list == NULL, converting the call
with NULL from a poor man's sanity check into an explicit command
not to touch TOC items' list membership. Clarify some of the comments
around this; in particular, note the primary purpose of the check for
pending_list membership, which is to ensure that we can't try to restore
the same item twice, in case a TOC list forces it to be restored before
its dependency count goes to zero.
Per report from Fabrízio de Royes Mello. Back-patch to 9.3, like the
previous commit.
Discussion: https://postgr.es/m/CAFcNs+pjuv0JL_x4+=71TPUPjdLHOXA4YfT32myj_OrrZb4ohA@mail.gmail.com
This became possible by commit
6c2003f8a1. This just makes pg_dump aware
of it and updates the documentation.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Change to appendStringInfoChar() or appendStringInfoString() where those
can be used.
Author: David Rowley <david.rowley@2ndquadrant.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
Because we push all ACL (i.e. GRANT/REVOKE) restore steps to the end,
materialized view refreshes were occurring while the permissions on
referenced objects were still at defaults. This led to failures if,
say, an MV owned by user A reads from a table owned by user B, even
if B had granted the necessary privileges to A. We've had multiple
complaints about that type of restore failure, most recently from
Jordan Gigov.
The ideal fix for this would be to start treating ACLs as dependency-
sortable objects, rather than hard-wiring anything about their dump order
(the existing approach is a messy kluge dating to commit dc0e76ca3).
But that's going to be a rather major change, and it certainly wouldn't
lead to a back-patchable fix. As a short-term solution, convert the
existing two-pass hack (ie, normal objects then ACLs) to a three-pass hack,
ie, normal objects then ACLs then matview refreshes. Because this happens
in RestoreArchive(), it will also fix the problem when restoring from an
existing archive-format dump.
(Note this means that if a matview refresh would have failed under the
permissions prevailing at dump time, it'll fail during restore as well.
We'll define that as user error rather than something we should try
to work around.)
To avoid performance loss in parallel restore, we need the matview
refreshes to still be parallelizable. Hence, clean things up enough
so that both ACLs and matviews are handled by the parallel restore
infrastructure, instead of reverting back to serial restore for ACLs.
There is still a final serial step, but it shouldn't normally have to
do anything; it's only there to try to recover if we get stuck due to
some problem like unresolved circular dependencies.
Patch by me, but it owes something to an earlier attempt by Kevin Grittner.
Back-patch to 9.3 where materialized views were introduced.
Discussion: https://postgr.es/m/28572.1500912583@sss.pgh.pa.us
Commit 4d57e83816 added support for getting I/O errors out of zlib,
but it introduced a portability problem for systems without zlib.
Repair by wrapping the zlib call inside #ifdef and restore the original
code in the other branch.
This serves to illustrate the inadequacy of the zlib abstraction in
pg_backup_archiver: there is no way to call gzerror() in that
abstraction. This means that the several places that call GZREAD and
GZWRITE are currently doing error reporting wrongly, but ENOTIME to get
it fixed before next week's release set.
Backpatch to 9.4, like the commit that introduced the problem.
Some error reports were reporting strerror(errno), which for some error
conditions coming from zlib are wrong, resulting in confusing reports
such as
pg_restore: [compress_io] could not read from input file: Success
which makes no sense. To correctly extract the error message we need to
use gzerror(), so let's do that.
This isn't as comprehensive or as neat as I would like, but at least it
should improve things in many common cases. The zlib abstraction in
compress_io does not seem to be applied consistently enough; we could
perhaps improve that, but it seems master-only material, not a bug fix
for back-patching.
This problem goes back all the way, but I decided to apply back to 9.4
only, because older branches don't contain commit 14ea89366 which this
change depends on.
Authors: Vladimir Kunschikov, Álvaro Herrera
Discussion: https://postgr.es/m/1498120508308.9826@infotecs.ru
The comment for dumpACL() got neglected when initacls and initracls were
added and the discussion of what 'racls' is wasn't very clear either.
Per complaint from Tom.
pg_dump with the --clean option failed to emit DROP EVENT TRIGGER
commands for event triggers. In a closely related oversight,
it also did not emit ALTER OWNER commands for event triggers.
Since only superusers can create event triggers, the latter oversight
is of little practical consequence ... but if we're going to record
an owner for event triggers, then surely pg_dump should preserve it.
Per complaint from Greg Atkins. Back-patch to 9.3 where event triggers
were introduced.
Discussion: https://postgr.es/m/20170722191142.yi4e7tzcg3iacclg@gmail.com
In the frontend Makefiles that pull in libpgfeutils, we'd generally
done it like this:
LDFLAGS += -L$(top_builddir)/src/fe_utils -lpgfeutils $(libpq_pgport)
That method is badly broken, as seen in bug #14742 from Chris Ruprecht.
The -L flag for src/fe_utils ends up being placed after whatever random
-L flags are in LDFLAGS already. That puts us at risk of pulling in
libpgfeutils.a from some previous installation rather than the freshly
built one in src/fe_utils. Also, the lack of an "override" is hazardous
if someone tries to specify some LDFLAGS on the make command line.
The correct way to do it is like this:
override LDFLAGS := -L$(top_builddir)/src/fe_utils -lpgfeutils $(libpq_pgport) $(LDFLAGS)
so that libpgfeutils, along with libpq, libpgport, and libpgcommon, are
guaranteed to be pulled in from the build tree and not from any referenced
system directory, because their -L flags will appear first.
In some places we'd been even lazier and done it like this:
LDFLAGS += -L$(top_builddir)/src/fe_utils -lpgfeutils -lpq
which is subtly wrong in an additional way: on platforms where we can't
restrict the symbols exported by libpq.so, it allows libpgfeutils to
latch onto libpgport and libpgcommon symbols from libpq.so, rather than
directly from those static libraries as intended. This carries hazards
like those explained in the comments for the libpq_pgport macro.
In addition to fixing the broken libpgfeutils usages, I tried to
standardize on using $(libpq_pgport) like so:
override LDFLAGS := $(libpq_pgport) $(LDFLAGS)
even where libpgfeutils is not in the picture. This makes no difference
right now but will hopefully discourage future mistakes of the same ilk.
And it's more like the way we handle CPPFLAGS in libpq-using Makefiles.
In passing, just for consistency, make pgbench include PTHREAD_LIBS the
same way everyplace else does, ie just after LIBS rather than in some
random place in the command line. This might have practical effect if
there are -L switches in that macro on some platform.
It looks to me like the MSVC build scripts are not affected by this
error, but someone more familiar with them than I might want to double
check.
Back-patch to 9.6 where libpgfeutils was introduced. In 9.6, the hazard
this error creates is that a reinstallation might link to the prior
installation's copy of libpgfeutils.a and thereby fail to absorb a
minor-version bug fix.
Discussion: https://postgr.es/m/20170714125106.9231.13772@wrigleys.postgresql.org
When writing a backup to stdout with pg_basebackup on Windows, put stdout
to binary mode. Any CR bytes in the output will otherwise be output
incorrectly as CR+LF.
In the passing, standardize on using "_setmode" instead of "setmode", for
the sake of consistency. They both do the same thing, but according to
MSDN documentation, setmode is deprecated.
Fixes bug #14634, reported by Henry Boehlert. Patch by Haribabu Kommi.
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/20170428082818.24366.13134@wrigleys.postgresql.org
Commit 330b84d8c4 didn't contemplate the case where the public schema
has been dropped and introduced a query which fails when there is no
public schema into pg_dump (when used with -c).
Adjust the query used by pg_dump to handle the case where the public
schema doesn't exist and add tests to check that such a case no longer
fails.
Back-patch the specific fix to 9.6, as the prior commit was.
Adding tests for this case involved adding support to the pg_dump
TAP tests to work with multiple databases, which, while not a large
change, is a bit much to back-patch, so that's only done in master.
Addresses bug #14650
Discussion: https://www.postgresql.org/message-id/20170512181801.1795.47483%40wrigleys.postgresql.org
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The combination of -Z -Fp and output to stdout resulted in corrupted
output data, because we left stdout in text mode, resulting in newline
conversion being done on the compressed stream. Switch stdout to binary
mode for this case, at the same place where we do it for non-text output
formats.
Report and patch by Kuntal Ghosh, tested by Ashutosh Sharma and Neha
Sharma. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAGz5QCJPvbBjXAmJuGx1B_41yVCetAJhp7rtaDf7XQGWuB1GSw@mail.gmail.com
This will not work on restore, but it will allow dumping out pg_catalog
for research and documentation.
Reported-by: Neil Anderson <neil.t.anderson@gmail.com>
Bug: #14701
Dunno what 'p' was supposed to mean, but since neither the code below
here nor pg_collation.h think it's valid, it must be a mistake.
Per report from Thomas Kellerer.
Discussion: https://postgr.es/m/og9q8f%24oes%241%40blaine.gmane.org
If an operator class has no operators or functions, and doesn't need
a STORAGE clause, we emitted "CREATE OPERATOR CLASS ... AS ;" which
is syntactically invalid. Fix by forcing a STORAGE clause to be
emitted anyway in this case.
(At some point we might consider changing the grammar to allow CREATE
OPERATOR CLASS without an opclass_item_list. But probably we'd want to
omit the AS in that case, so that wouldn't fix this pg_dump issue anyway.)
It's been like this all along, so back-patch to all supported branches.
Daniel Gustafsson, tweaked by me to avoid a dangling-pointer bug
Discussion: https://postgr.es/m/D9E5FC64-7A37-4F3D-B946-7E4FB468F88A@yesql.se
Reformat various places in which pgindent will make a mess, and
fix a few small violations of coding style that I happened to notice
while perusing the diffs from a pgindent dry run.
There is one actual bug fix here: the need-to-enlarge-the-buffer code
path in icu_convert_case was obviously broken. Perhaps it's unreachable
in our usage? Or maybe this is just sadly undertested.
Consistently refer to such an entry as a "statistics object", not just
"statistics" or "extended statistics". Previously we had a mismash of
terms, accompanied by utter confusion as to whether the term was
singular or plural. That's not only grating (at least to the ear of
a native English speaker) but could be outright misleading, eg in error
messages that seemed to be referring to multiple objects where only one
could be meant.
This commit fixes the code and a lot of comments (though I may have
missed a few). I also renamed two new SQL functions,
pg_get_statisticsextdef -> pg_get_statisticsobjdef
pg_statistic_ext_is_visible -> pg_statistics_obj_is_visible
to conform better with this terminology.
I have not touched the SGML docs other than fixing those function
names; the docs certainly need work but it seems like a separable task.
Discussion: https://postgr.es/m/22676.1494557205@sss.pgh.pa.us
Previously, we had the WITH clause in the middle of the command, where
you'd specify both generic options as well as statistic types. Few
people liked this, so this commit changes it to remove the WITH keyword
from that clause and makes it accept statistic types only. (We
currently don't have any generic options, but if we invent in the
future, we will gain a new WITH clause, probably at the end of the
command).
Also, the column list is now specified without parens, which makes the
whole command look more similar to a SELECT command. This change will
let us expand the command to supporting expressions (not just columns
names) as well as multiple tables and their join conditions.
Tom added lots of code comments and fixed some parts of the CREATE
STATISTICS reference page, too; more changes in this area are
forthcoming. He also fixed a potential problem in the alter_generic
regression test, reducing verbosity on a cascaded drop to avoid
dependency on message ordering, as we do in other tests.
Tom also closed a security bug: we documented that table ownership was
required in order to create a statistics object on it, but didn't
actually implement it.
Implement tab-completion for statistics objects. This can stand some
more improvement.
Authors: Alvaro Herrera, with lots of cleanup by Tom Lane
Discussion: https://postgr.es/m/20170420212426.ltvgyhnefvhixm6i@alvherre.pgsql
For CREATE/ALTER PUBLICATION/SUBSCRIPTION, use similar option style as
other statements that use a WITH clause for options.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
buildDefaultACLCommands() didn't destroy the string buffer created in
certain cases, leading to a memory leak. Fix by destroying the buffer
before returning from the function.
Spotted by Coverity.
Author: Michael Paquier
Back-patch to 9.6 where buildDefaultACLCommands() was added.
This gets rid of the code that issued separate queries to retrieve the
partitioning parent-child relationship, parent partition key, and child
partition bound information. With this patch, the information is
retrieved instead using the queries issued from getTables() and
getInherits(), which is both more efficient than the previous approach
and doesn't require any new code.
Since the partitioning parent-child relationship is now retrieved with
the same old code that handles inheritance, partition attributes receive
a proper flagInhAttrs() treatment (that it didn't receive before), which
is needed so that the inherited NOT NULL constraints are not emitted if
we already emitted it for the parent.
Also, fix a bug in pg_dump's --binary-upgrade code, which caused pg_dump
to emit invalid command to attach a partition to its parent.
Author: Amit Langote, with some additional changes by me.
It's easy to overlook the need for one, and its lack is annoying for the
next developer wanting to create a new test. Rather than expect every
individual command to add the semicolon, just append one automatically.
Discussion: http://postgr.es/m/20170503172746.rwftidszir67sgk7@alvherre.pgsql
Declarative partitioning duplicated the TypedTableElement productions,
evidently to remove the need to specify WITH OPTIONS when creating
partitions. Instead, simply make WITH OPTIONS optional in the
TypedTableElement production and remove all of the duplicate
PartitionElement-related productions. This change simplifies the
syntax and makes WITH OPTIONS optional when adding defaults, constraints
or storage parameters to columns when creating either typed tables or
partitions.
Also update pg_dump to no longer include WITH OPTIONS, since it's not
necessary, and update the documentation to reflect that WITH OPTIONS is
now optional.
We were accepting creation of extended statistics only for regular
tables, but they can usefully be created for foreign tables, partitioned
tables, and materialized views, too. Allow those cases.
While at it, make sure all the rejected cases throw a consistent error
message, and add regression tests for the whole thing.
Author: David Rowley, Álvaro Herrera
Discussion: https://postgr.es/m/CAKJS1f-BmGo410bh5RSPZUvOO0LhmHL2NYmdrC_Jm8pk_FfyCA@mail.gmail.com
This is necessary to be able to reproduce publication membership
correctly if tables are involved in inheritance.
Author: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Commit 96a7128b made pg_dump and pg_dumpall sync their output by
default. However, there's no great need for that in testing, and it
could impose a performance penalty, so we add the --no-sync flag to most
of the test cases.
Michael Paquier
In struct _archiveHandle, some of the fields have the same name as a
typedef. This is kind of confusing, so rename the types so they have
names distinct from the struct fields. In C++, the previous coding
changes the meaning of the typedef in the scope of the struct, causing
warnings and possibly other problems.
Reviewed-by: Andres Freund <andres@anarazel.de>
This is the SQL standard-conforming variant of PostgreSQL's serial
columns. It fixes a few usability issues that serial columns have:
- CREATE TABLE / LIKE copies default but refers to same sequence
- cannot add/drop serialness with ALTER TABLE
- dropping default does not drop sequence
- need to grant separate privileges to sequence
- other slight weirdnesses because serial is some kind of special macro
Reviewed-by: Vitaly Burovoy <vitaly.burovoy@gmail.com>
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.czhttps://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
Add a column collprovider to pg_collation that determines which library
provides the collation data. The existing choices are default and libc,
and this adds an icu choice, which uses the ICU4C library.
The pg_locale_t type is changed to a union that contains the
provider-specific locale handles. Users of locale information are
changed to look into that struct for the appropriate handle to use.
Also add a collversion column that records the version of the collation
when it is created, and check at run time whether it is still the same.
This detects potentially incompatible library upgrades that can corrupt
indexes and other structures. This is currently only supported by
ICU-provided collations.
initdb initializes the default collation set as before from the `locale
-a` output but also adds all available ICU locales with a "-x-icu"
appended.
Currently, ICU-provided collations can only be explicitly named
collations. The global database locales are still always libc-provided.
ICU support is enabled by configure --with-icu.
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Add functionality for a new subscription to copy the initial data in the
tables and then sync with the ongoing apply process.
For the copying, add a new internal COPY option to have the COPY source
data provided by a callback function. The initial data copy works on
the subscriber by receiving COPY data from the publisher and then
providing it locally into a COPY that writes to the destination table.
A WAL receiver can now execute full SQL commands. This is used here to
obtain information about tables and publications.
Several new options were added to CREATE and ALTER SUBSCRIPTION to
control whether and when initial table syncing happens.
Change pg_dump option --no-create-subscription-slots to
--no-subscription-connect and use the new CREATE SUBSCRIPTION
... NOCONNECT option for that.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Tested-by: Erik Rijkers <er@xs4all.nl>
Not every platform supports non-default collations, as pointed out by
the buildfarm, so skip collation-related regression tests in pg_dump
when they aren't supported.
This is really testing getopt more than pg_dump, and what getopt returns
exactly appears to differ based on platform, so remove this test.
Per buildfarm.
These improvements bring the lines-of-code coverage of pg_dump.c up to
87.7% (at least using LCOV 1.12, 1.11 seems to differ slightly). Nearly
every function is covered, three of the four which aren't are only
called when talking to older PG instances.
There is more which can, and should, be done here to improve the
coverage but it's past time to see what the buildfarm thinks of this.
What has been added:
- Coverage for many more command-line options
- Use command_fails_like instead of command_exit_is
- Operator classes, operator families
- Text search configuration, templates, parsers, dictionaries
- FDWs, servers, foreign tables
- Materialized views
- Improved Publications / Subscriptions test (though this needs work,
see PG10 open items and tests marked with XXX in 002_pg_dump.pl)
- Unlogged tables
- Partitioned tables
- Additional ACL testing for various object types
There is room for improvement, specifically:
- Various type-based option (alignment, storage, etc)
- Composite type collation
- Extra Procedural language functions (inline, validator)
- Different function options (SRF, Transform, config, security definer,
cost, leakproof)
- OpClass options (default, storage, order by, recheck)
- OpFamily options (order by, recheck)
- Aggregate functions (combinefunc, serialfunc, deserialfunc, etc)
- Text Search parser 'headline'
- Text Search template 'init'
- FDW options (handler, validator, options)
- Server options (type, version, options)
- User mapping options
- Default ACLs for sequences, types
- Security labels
- View circular dependencies (last function that needs coverage)
- Toast table autovacuum options
- Replica identity options
- Independent indexes (plus marking them as clustered on)
- Deferrable / initially deferred constraints
- Independent domain constraints
There's bits of extension pg_dump'ing also not covered, but those will
need to go into test_pg_dump (such as having a filter for config
tables).
Last, but not least, this approximately halves the number of tests run
with 'ok()' by removing the ok()-based checking of if all runs are
covered by each test. Instead, 002_pg_dump.pl will just exit out in
such a case (with a message in the log file). In general, when adding
tests, cover all runs unless there is a very good reason not to (such as
adding a 'catch-all' case). With these changes, the resulting output
and number of "tests" run is actually reduced.
Commits 89e0bac86 et al replaced newlines with spaces in object names
printed in SQL comments, but we neglected to consider that the same
names are also printed by "pg_restore -l", and a newline would render
the output unparseable by "pg_restore -L". Apply the same replacement
in "-l" output. Since "pg_restore -L" doesn't actually examine any
object names, only the dump ID field that starts each line, this is
enough to fix things for its purposes.
The previous fix was treated as a security issue, and we might have
done that here as well, except that the issue was reported publicly
to start with. Anyway it's hard to see how this could be exploited
for SQL injection; "pg_restore -L" doesn't do much with the file
except parse it for leading integers.
Per bug #14587 from Milos Urbanek. Back-patch to all supported versions.
Discussion: https://postgr.es/m/20170310155318.1425.30483@wrigleys.postgresql.org
Although it's reasonable to expect that most of these constants will
never change, that does not make it good programming style to hard-code
the value rather than using the RELKIND_FOO macros.
Discussion: https://postgr.es/m/11145.1488931324@sss.pgh.pa.us
Although it's reasonable to expect that most of these constants will
never change, that does not make it good programming style to hard-code
the value rather than using the RELKIND_FOO macros. There were only
a few such violations, and all relatively new AFAICT.
Existing style is mostly to inject relkind values into constructed
query strings using %c. I did not bother to touch places that did it
like that, but really a better technique is to stringify the RELKIND
macro, at least in places where you'd want single quotes around the
code character. That avoids any runtime effort and keeps the RELKIND
symbol close to where it's used.
Discussion: https://postgr.es/m/11145.1488931324@sss.pgh.pa.us
Add new option --no-role-passwords which dumps roles without passwords.
Since we don’t need passwords, we choose to use pg_roles in preference
to pg_authid since access may be restricted for security reasons in
some configrations.
Robins Tharakan and Simon Riggs
pg_dump has always handled the public schema in a special way when it
comes to the "--clean" option. To wit, we do not drop or recreate the
public schema in "normal" mode, but when we are run in "--clean" mode
then we do drop and recreate the public schema.
When running in "--clean" mode, the public schema is dropped and then
recreated and it is recreated with the normal schema-default privileges
of "nothing". This is unlike how the public schema starts life, which
is to have CREATE and USAGE GRANT'd to the PUBLIC role, and that is what
is recorded in pg_init_privs.
Due to this, in "--clean" mode, pg_dump would mistakenly only dump out
the set of privileges required to go from the initdb-time privileges on
the public schema to whatever the current-state privileges are. If the
privileges were not changed from initdb time, then no privileges would
be dumped out for the public schema, but with the schema being dropped
and recreated, the result was that the public schema would have no ACLs
on it instead of what it should have, which is the initdb-time
privileges.
Practically speaking, this meant that pg_dump with --clean mode dumping
a database where the ACLs on the public schema were not changed from the
default would, upon restore, result in a public schema with *no*
privileges GRANT'd, not matching the state of the existing database
(where the initdb-time privileges would have been CREATE and USAGE to
the PUBLIC role for the public schema).
To fix, adjust the query in getNamespaces() to ignore the pg_init_privs
entry for the public schema when running in "--clean" mode, meaning that
the privileges for the public schema would be dumped, correctly, as if
it was going from a newly-created schema to the current state (which is,
indeed, what will happen during the restore thanks to the DROP/CREATE).
Only the public schema is handled in this special way by pg_dump, no
other initdb-time objects are dropped/recreated in --clean mode.
Back-patch to 9.6 where the bug was introduced.
Discussion: https://postgr.es/m/3534542.o3cNaKiDID%40techfox
We attached no schema label to comments for procedural languages, casts,
transforms, operator classes, operator families, or text search objects.
The first three categories of objects don't really have schemas, but
pg_dump treats them as if they do, and it seems like the TocEntry fields
for their comments had better match the TocEntry fields for the parent
objects. (As an example of a possible hazard, the type names in a CAST
will be formatted with the assumption of a particular search_path, so
failing to ensure that this same path is active for the COMMENT ON command
could lead to an error or to attaching the comment to the wrong cast.)
In the last six cases, this was a flat-out error --- possibly mine to
begin with, but it was a long time ago.
The security label for a procedural language was likewise not correctly
labeled as to schema, and both the comment and security label for a
procedural language were not correctly labeled as to owner.
In simple cases the restore would accidentally work correctly anyway, since
these comments and security labels would normally get emitted right after
the owning object, and so the search path and active user would be correct
anyhow. But it could fail in corner cases; for example a schema-selective
restore would omit comments it should include.
Giuseppe Broccolo noted the oversight, and proposed the correct fix, for
text search dictionary objects; I found the rest by cross-checking other
dumpComment() calls. These oversights are ancient, so back-patch all
the way.
Discussion: https://postgr.es/m/CAFzmHiWwwzLjzwM4x5ki5s_PDMR6NrkipZkjNnO3B0xEpBgJaA@mail.gmail.com
When performing a pg_upgrade, we copy the files behind pg_largeobject
and pg_largeobject_metadata, allowing us to avoid having to dump out and
reload the actual data for large objects and their ACLs.
Unfortunately, that isn't all of the information which can be associated
with large objects. Currently, we also support COMMENTs and SECURITY
LABELs with large objects and these were being silently dropped during a
pg_upgrade as pg_dump would skip everything having to do with a large
object and pg_upgrade only copied the tables mentioned to the new
cluster.
As the file copies happen after the catalog dump and reload, we can't
simply include the COMMENTs and SECURITY LABELs in pg_dump's binary-mode
output but we also have to include the actual large object definition as
well. With the definition, comments, and security labels in the pg_dump
output and the file copies performed by pg_upgrade, all of the data and
metadata associated with large objects is able to be successfully pulled
forward across a pg_upgrade.
In 9.6 and master, we can simply adjust the dump bitmask to indicate
which components we don't want. In 9.5 and earlier, we have to put
explciit checks in in dumpBlob() and dumpBlobs() to not include the ACL
or the data when in binary-upgrade mode.
Adjustments made to the privileges regression test to allow another test
(large_object.sql) to be added which explicitly leaves a large object
with a comment in place to provide coverage of that case with
pg_upgrade.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/20170221162655.GE9812@tamriel.snowman.net
c.h #includes a number of core libc header files, such as <stdio.h>.
There's no point in re-including these after having read postgres.h,
postgres_fe.h, or c.h; so remove code that did so.
While at it, also fix some places that were ignoring our standard pattern
of "include postgres[_fe].h, then system header files, then other Postgres
header files". While there's not any great magic in doing it that way
rather than system headers last, it's silly to have just a few files
deviating from the general pattern. (But I didn't attempt to enforce this
globally, only in files I was touching anyway.)
I'd be the first to say that this is mostly compulsive neatnik-ism,
but over time it might save enough compile cycles to be useful.
This stores a data type, required to be an integer type, with the
sequence. The sequences min and max values default to the range
supported by the type, and they cannot be set to values exceeding that
range. The internal implementation of the sequence is not affected.
Change the serial types to create sequences of the appropriate type.
This makes sure that the min and max values of the sequence for a serial
column match the range of values supported by the table column. So the
sequence can no longer overflow the table column.
This also makes monitoring for sequence exhaustion/wraparound easier,
which currently requires various contortions to cross-reference the
sequences with the table columns they are used with.
This commit also effectively reverts the pg_sequence column reordering
in f3b421da5f, because the new seqtypid
column allows us to fill the hole in the struct and create a more
natural overall column ordering.
Reviewed-by: Steve Singer <steve@ssinger.info>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
In commit 23f34fa, we changed how ACLs were handled to use the new
pg_init_privs catalog and to dump out the ACL commands as REVOKE+GRANT
combinations instead of trying to REVOKE all rights always and then
GRANT back just the ones which were in place.
Unfortunately, the DEFAULT PRIVILEGES system didn't quite get the
correct treatment with this change and ended up (incorrectly) only
including positive GRANTs instead of both the REVOKEs and GRANTs
necessary to preserve the correct privileges.
There are only a couple cases where such REVOKEs are possible because,
generally speaking, there's few rights which exist on objects by
default to be revoked.
Examples of REVOKEs which weren't being correctly preserved are when
privileges are REVOKE'd from the creator/owner, like so:
ALTER DEFAULT PRIVILEGES
FOR ROLE myrole
REVOKE SELECT ON TABLES FROM myrole;
or when other default privileges are being revoked, such as EXECUTE
rights granted to public for functions:
ALTER DEFAULT PRIVILEGES
FOR ROLE myrole
REVOKE EXECUTE ON FUNCTIONS FROM PUBLIC;
Fix this by correctly working out what the correct REVOKE statements are
(if any) and dump them out, just as we do for everything else.
Noticed while developing additional regression tests for pg_dump, which
will be landing shortly.
Back-patch to 9.6 where the bug was introduced.
The pg_dump TAP tests have gotten pretty far from what perltidy thinks
they should be, so fix that, and in passing use long-form argument names
with arguments passed via "=" in a similar vein to 58da833.
No functional changes here, just whitespace and changing runs from
"-f" to "--file=", and similar.
In the new code for selecting sequence data from pg_sequence, set the
schema to pg_catalog instead of the sequences own schema, and refer to
the sequence by OID instead of name, which was missing a schema
qualification.
Reported-by: Stephen Frost <sfrost@snowman.net>
For some reason that is lost in history, a descending sequence would
default its minimum value to -2^63+1 (-PG_INT64_MAX) instead of
-2^63 (PG_INT64_MIN), even though explicitly specifying a minimum value
of -2^63 would work. Fix this inconsistency by using the full range by
default.
Reported-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Missing a destroyPQExpBuffer() in the early exit branch. The early
exits aren't really necessary. Most similar functions just proceed
running the rest of the code zero times and clean up at the end.
When considering a sequence's Data entry in dumpSequenceData, we were
actually looking at the sequence definition's dump flag to decide if we
should dump the data or not. That's generally fine, except for when the
sequence data entry was created by processExtensionTables() because it's
a config sequence. In that case, the sequence itself won't be marked as
dumping data because it's part of an extension, leading to the need for
processExtensionTables() to create the sequence data entry.
This leads to extension config sequence data not being included in the
dump when it should be. Fix this by looking at the sequence data's dump
flag instead, just as dumpTableData() was doing for tables (which is why
config tables were correctly being handled), and add a regression test
to make sure we don't break it moving forward.
All of this is a bit round-about since we can now represent which
components of a given dump item should be dumped out through the dump
flag. A future improvement might be to change checkExtensionMembership()
to check for config sequences/tables and set the dump flag based on that
directly, possibly removing the need for processExtensionTables().
Bug found by Daniele Varrazzo.
Discussion: https://postgr.es/m/CA+mi_8ZmxQM7+nZ7pJ8uyfxc9V3o=UAG14dVqvftdmvw8OJ3gQ@mail.gmail.com
Patch by Michael Paquier, with some tweaking of the regression tests by
me.
Back-patch to 9.6 where the bug was introduced.
pg_restore will currently accept invalid values for the number of
parallel jobs to run (eg: -1), unlike pg_dump which does check that the
value provided is reasonable.
Worse, '-1' is actually a valid, independent, parameter (as an alias for
--single-transaction), leading to potentially completely unexpected
results from a command line such as:
-> pg_restore -j -1
Where a user would get neither parallel jobs nor a single-transaction.
Add in validity checking of the parallel jobs option, as we already have
in pg_dump, before we try to open up the archive. Also move the check
that we haven't been asked to run more parallel jobs than possible on
Windows to the same place, so we do all the option validity checking
before opening the archive.
Back-patch all the way, though for 9.2 we're adding the Windows-specific
check against MAXIMUM_WAIT_OBJECTS as that check wasn't back-patched
originally.
Discussion: https://www.postgresql.org/message-id/20170110044815.GC18360%40tamriel.snowman.net
When using pg_dump --strict-names and a schema pattern which doesn't
match any schemas (eg: --schema='nonexistant*'), we were incorrectly
throwing an error claiming no tables were found when, really, there
were no schemas found:
-> pg_dump --strict-names --schema='nonexistant*'
pg_dump: no matching tables were found for pattern "nonexistant*"
Fix that by changing the error message to say 'schemas' instead, since
that is what we are actually complaining about.
Noticed while testing pg_dump error cases.
Back-patch to 9.6 where --strict-names and this error message were
introduced.
Including the program name twice is not helpful:
-> pg_dump -j -1
pg_dump: pg_dump: invalid number of parallel jobs
Correct by removing the progname from the exit_horribly() call used when
validating the number of parallel jobs.
Noticed while testing various pg_dump error cases.
Back-patch to 9.3 where parallel pg_dump was added.
For reasons unknown, pg_dumpall and pg_restore managed to escape the
basic set of TAP tests that were added for pg_dump in 6bd356c3, so
let's get them added now. A few minor adjustments are also made to the
dump/restore tests to improve code coverage for pg_restore/pg_dumpall.
findTableByOid() is allowed to return NULL and we should therefore be
checking for that case. getOwnedSeqs() and dumpSequence() shouldn't
ever actually see this happen, but given odd circumstances it might and
commit f9e439b1 probably shouldn't have removed that check.
Pointed out by Coverity. Initial patch from Michael Paquier.
Back-patch to 9.6, where that commit had removed the check.
The -v/--verbose option was not included in the output from --help for
pg_dumpall even though it's in the pg_dumpall documentation and has
apparently been around since pg_dumpall was reimplemented in C in 2002.
Fix that by adding it.
Pointed out by Daniel Westermann.
Back-patch to all supported branches.
Discussion: https://www.postgresql.org/message-id/2020970042.4589542.1482482101585.JavaMail.zimbra%40dbi-services.com
There was code that attempted to check whether the sequence name stored
inside the sequence was the same as the name in pg_class. But that code
was already ifdef'ed out, and now that the sequence no longer stores its
own name, it's altogether obsolete, so remove it.
In pg_dump.c dumpCast() and dumpTransform(), we would happily ignore the
cast or transform if it happened to use a built-in function because we
weren't including the information about built-in functions when querying
pg_proc from getFuncs().
Modify the query in getFuncs() to also gather information about
functions which are used by user-defined casts and transforms (where
"user-defined" means "has an OID >= FirstNormalObjectId"). This also
adds to the TAP regression tests for 9.6 and master to cover these
types of objects.
Back-patch all the way for casts, back to 9.5 for transforms.
Discussion: https://www.postgresql.org/message-id/flat/20160504183952.GE10850%40tamriel.snowman.net
We didn't start ensuring that all built-in objects had OIDs less than
16384 until 8.1, so for 8.0 servers we still need to query the value out
of pg_database. We need this, in particular, to distinguish which casts
were built-in and which were user-defined.
For HEAD, we only worry about going back to 8.0, for the back-branches,
we also ensure that 7.0-7.4 work.
Discussion: https://www.postgresql.org/message-id/flat/20160504183952.GE10850%40tamriel.snowman.net
Move sequence metadata (start, increment, etc.) into a proper system
catalog instead of storing it in the sequence heap object. This
separates the metadata from the sequence data. Sequence metadata is now
operated on transactionally by DDL commands, whereas previously
rollbacks of sequence-related DDL commands would be ignored.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Partition name needs to be quoted in the ATTACH PARTITION command
constructed in binary-upgrade mode.
Silence compiler warning about set but unused variable, without
--enable-cassert.
Table partitioning is like table inheritance and reuses much of the
existing infrastructure, but there are some important differences.
The parent is called a partitioned table and is always empty; it may
not have indexes or non-inherited constraints, since those make no
sense for a relation with no data of its own. The children are called
partitions and contain all of the actual data. Each partition has an
implicit partitioning constraint. Multiple inheritance is not
allowed, and partitioning and inheritance can't be mixed. Partitions
can't have extra columns and may not allow nulls unless the parent
does. Tuples inserted into the parent are automatically routed to the
correct partition, so tuple-routing ON INSERT triggers are not needed.
Tuple routing isn't yet supported for partitions which are foreign
tables, and it doesn't handle updates that cross partition boundaries.
Currently, tables can be range-partitioned or list-partitioned. List
partitioning is limited to a single column, but range partitioning can
involve multiple columns. A partitioning "column" can be an
expression.
Because table partitioning is less general than table inheritance, it
is hoped that it will be easier to reason about properties of
partitions, and therefore that this will serve as a better foundation
for a variety of possible optimizations, including query planner
optimizations. The tuple routing based which this patch does based on
the implicit partitioning constraints is an example of this, but it
seems likely that many other useful optimizations are also possible.
Amit Langote, reviewed and tested by Robert Haas, Ashutosh Bapat,
Amit Kapila, Rajkumar Raghuwanshi, Corey Huinker, Jaime Casanova,
Rushabh Lathia, Erik Rijkers, among others. Minor revisions by me.
We have had support for restrictive RLS policies since 9.5, but they
were only available through extensions which use the appropriate hooks.
This adds support into the grammer, catalog, psql and pg_dump for
restrictive RLS policies, thus reducing the cases where an extension is
necessary.
In passing, also move away from using "AND"d and "OR"d in comments.
As pointed out by Alvaro, it's not really appropriate to attempt
to make verbs out of "AND" and "OR", so reword those comments which
attempted to.
Reviewed By: Jeevan Chalke, Dean Rasheed
Discussion: https://postgr.es/m/20160901063404.GY4028@tamriel.snowman.net
Add an option to exclude blobs when running pg_dump. By default, blobs
are included but this option can be used to exclude them while keeping
the rest of the dump.
Commment updates and regression tests from me.
Author: Guillaume Lelarge
Reviewed-by: Amul Sul
Discussion: https://postgr.es/m/VisenaEmail.48.49926ea6f91dceb6.15355a48249@tc7-visena
Add a loop to check that each test covers all of the pg_dump runs. We
(I) had been a bit sloppy when adding new runs and not making sure to
mark if they should be under like or unlike for each test, this loop
makes sure that the test system will complain if any are forgotten in
the future.
The loop also correctly handles the 'catch all' cases, which are used to
avoid running unnecessary specific checks when a single catch-all can be
done (eg: a no-acl run should not have any GRANT commands).
Also, re-enable the testing of blobs, but use lo_from_bytea() instead of
trying to be cute and writing out to a file and then reading it back in
with psql, which proved to be difficult for some buildfarm members.
This allows us to add support for testing the --no-blobs option which
will be getting added shortly, provided the buildfarm doesn't blow up on
this.
pg_dump's traditional solution for breaking a circular dependency involving
a view was to create the view with CREATE TABLE and then later issue CREATE
RULE "_RETURN" ... to convert the table to a view, relying on the backend's
very very ancient code that supports making views that way. We've wanted
to get rid of that kluge for a long time, but the thing that finally
motivates doing something about it is the recognition that this method
fails with the --clean option, because it leads to issuing DROP RULE
"_RETURN" followed by DROP TABLE --- and the backend won't let you drop a
view's _RETURN rule.
Instead, let's break circular dependencies by initially creating the view
using CREATE VIEW AS SELECT NULL::columntype AS columnname, ... (so that
it has the right column names and types to support external references,
but no dependencies beyond the column data types), and then later dumping
the ON SELECT rule using the spelling CREATE OR REPLACE VIEW. This method
wasn't available when this code was originally written, but it's been
possible since PG 7.3, so it seems fine to start relying on it now.
To solve the --clean problem, make the dropStmt for an ON SELECT rule
be CREATE OR REPLACE VIEW with the same dummy target list as above.
In this way, during the DROP phase, we first reduce the view to have
no extra dependencies, and then we can drop it entirely when we've
gotten rid of whatever had a circular dependency on it.
(Note: this should work adequately well with the --if-exists option, since
the CREATE OR REPLACE VIEW will go through whether the view exists or not.
It could fail if the view exists with a conflicting column set, but we
don't really support --clean against a non-matching database anyway.)
This allows cleaning up some other kluges inside pg_dump, notably that
we don't need a notion of reloptions attached to a rule anymore.
Although this is a bug fix, commit to HEAD only for now. The problem's
existed for a long time and we've had relatively few complaints, so it
doesn't really seem worth taking risks to fix it in the back branches.
We might revisit that choice if no problems emerge.
Discussion: <19092.1479325184@sss.pgh.pa.us>
Teach it not to complain if the dropStmt attached to an archive entry
is actually spelled CREATE OR REPLACE VIEW, since that will happen due to
an upcoming bug fix. Also, if it doesn't recognize a dropStmt, have it
print a WARNING and then emit the dropStmt unmodified. That seems like a
much saner behavior than Assert'ing or dumping core due to a null-pointer
dereference, which is what would happen before :-(.
Back-patch to 9.4 where this option was introduced.
Discussion: <19092.1479325184@sss.pgh.pa.us>
Previously, pg_upgrade migrated sequence data like tables by copying the
on-disk file. This does not allow any changes in the on-disk format for
sequences. It's simpler to just have pg_dump set the new sequence
values as it normally does. To do that, create a hidden submode in
pg_dump that dumps sequence data even when a schema-only dump is
requested, and trigger that submode in binary upgrade mode. (This new
submode could easily be exposed as a command-line option, but it has
limited use outside of pg_dump and would probably cause some confusion,
so we don't do that at this time.)
Reviewed-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Instead of handling both sequence data and table data internally as
"table data", handle sequences separately under a "sequence set" type.
We already handled materialized view data differently, so it makes the
code somewhat cleaner to handle each relation kind separately at the top
level.
This does not change the output format, since there already was a
separate "SEQUENCE SET" archive entry type. A noticeable difference is
that SEQUENCE SET entries now always appear after TABLE DATA entries.
And in parallel mode there is less sorting to do, because the sequence
data entries are no longer considered table data.
Reviewed-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The ArchiveHandle structure contained the archive format version number
twice, once as a single field and once split into components. Simplify
that by just keeping the single field and adding some macros to extract
the components. Introduce some macros for composing version numbers, to
eliminate the repeated use of magic formulas. Drop the unused trailing
zero byte from the run-time composite version representation.
reviewed by Tom Lane
I'm not sure if this provision for "pg_backup" behaving a bit differently
from "pg_dump" ever did anything useful in a released version. But it's
definitely dead code now.
Michael Paquier
The expected results in commit b4fc64578 seem to have been generated
in a non-C locale, which just points up the fact that the ORDER BY
clause was locale-sensitive.
Per buildfarm.
Previously GRANT order on databases was not well defined, due to the use
of EXCEPT without an ORDER BY. Add an ORDER BY, adapt test output.
I don't, at the moment, see reason to backpatch this.
Commit 64f3524e2 removed the stanza of code that examined these values.
I failed to notice they were unnecessary because my compiler didn't
warn about the un-read variables. Noted by Peter Eisentraut.
The need for dumping from such ancient servers has decreased to about nil
in the field, so let's remove all the code that catered to it. Aside
from removing a lot of boilerplate variant queries, this allows us to not
have to cope with servers that don't have (a) schemas or (b) pg_depend.
That means we can get rid of assorted squishy code around that. There
may be some nonobvious additional simplifications possible, but this patch
already removes about 1500 lines of code.
I did not remove the ability for pg_restore to read custom-format archives
generated by these old versions (and light testing says that that does
still work). If you have an old server, you probably also have a pg_dump
that will work with it; but you have an old custom-format backup file,
that might be all you have.
It'd be possible at this point to remove fmtQualifiedId()'s version
argument, but I refrained since that would affect code outside pg_dump.
Discussion: <2661.1475849167@sss.pgh.pa.us>
getBlobs' queries for pre-9.0 servers were broken in two ways:
the 7.x/8.x query uses DISTINCT so it can't have unspecified-type
NULLs in the target list, and both that query and the 7.0 one
failed to provide the correct output column labels, so that the
subsequent code to extract data from the PGresult would fail.
Back-patch to 9.6 where the breakage was introduced (by commit 23f34fa4b).
Amit Langote and Tom Lane
Discussion: <0a3e7a0e-37bd-8427-29bd-958135862f0a@lab.ntt.co.jp>
Without this, an extension containing an access method is not properly
dumped/restored during pg_upgrade --- the AM ends up not being a member
of the extension after upgrading.
Another oversight in commit 473b93287, reported by Andrew Dunstan.
Report: <f7ac29f3-515c-2a44-21c5-ec925053265f@dunslane.net>
The only field of this struct that other files have any need to touch
is the pointer to the TocEntry a worker is working on. (Well,
pg_backup_archiver.c is actually looking at workerStatus too, but that
can be finessed by specifying that the TocEntry pointer is NULL for a
non-busy worker.)
Hence, move out the TocEntry pointers to a separate array within
struct ParallelState, and then we can make struct ParallelSlot private.
I noted the possibility of this previously, but hadn't got round to
actually doing it.
Discussion: <1188.1464544443@sss.pgh.pa.us>
The existing APIs for creating and parsing command and status messages are
rather messy; for example, archive-format modules have to provide code
for constructing command messages, which is entirely pointless since
the code to read them is hard-wired in WaitForCommands() and hence
no format-specific variation is actually possible. But there's little
foreseeable reason to need format-specific variation anyway.
The situation for status messages is no better; at least those are both
constructed and parsed by format-specific code, but said code is quite
redundant since there's no actual need for format-specific variation.
To add insult to injury, the first API involves returning pointers to
static buffers, which is bad, while the second involves returning pointers
to malloc'd strings, which is safer but randomly inconsistent.
Hence, get rid of the MasterStartParallelItem and MasterEndParallelItem
APIs, and instead write centralized functions that construct and parse
command and status messages. If we ever do need more flexibility, these
functions can be the standard implementations of format-specific
callback methods, but that's a long way off if it ever happens.
Tom Lane, reviewed by Kevin Grittner
Discussion: <17340.1464465717@sss.pgh.pa.us>
The ListenToWorkers/ReapWorkerStatus APIs were messy and hard to use.
Instead, make DispatchJobForTocEntry register a callback function that
will take care of state cleanup, doing whatever had been done by the caller
of ReapWorkerStatus in the old design. (This callback is essentially just
the old mark_work_done function in the restore case, and a trivial test for
worker failure in the dump case.) Then we can have ListenToWorkers call
the callback immediately on receipt of a status message, and return the
worker to WRKR_IDLE state; so the WRKR_FINISHED state goes away.
This allows us to design a unified wait-for-worker-messages loop:
WaitForWorkers replaces EnsureIdleWorker and EnsureWorkersFinished as well
as the mess in restore_toc_entries_parallel. Also, we no longer need the
fragile API spec that the caller of DispatchJobForTocEntry is responsible
for ensuring there's an idle worker, since DispatchJobForTocEntry can just
wait until there is one.
In passing, I got rid of the ParallelArgs struct, which was a net negative
in terms of notational verboseness, and didn't seem to be providing any
noticeable amount of abstraction either.
Tom Lane, reviewed by Kevin Grittner
Discussion: <1188.1464544443@sss.pgh.pa.us>
<sys/select.h> is required by POSIX.1-2001 to get the prototype of
select(2), but nearly no systems enforce that because older standards
let you get away with including some other headers. Recent OpenBSD
hacking has removed that frail touch of friendliness, however, which
broke some compiles; fix all the way back to 9.1 by adding the required
standard. Only vacuumdb.c was reported to fail, but it seems easier to
fix the whole lot in a fell swoop.
Per bug #14334 by Sean Farrell.
Faulty AND/OR nesting in the WHERE clause of getFuncs' SQL query led to
dumping range constructor functions if they are part of an extension
and we're in binary-upgrade mode. Actually, we don't want to dump them
separately even then, since CREATE TYPE AS RANGE will create the range's
constructor functions regardless. Per report from Andrew Dunstan.
It looks like this mistake was introduced by me, in commit b985d4877, in
perhaps-overzealous refactoring to reduce code duplication. I'm suitably
embarrassed.
Report: <34854939-02d7-f591-5677-ce2994104599@dunslane.net>
Add tests for consistent support of connection strings in frontend
programs as well as proper handling of unusual characters in database
and user names. These tests were developed for the issues of
CVE-2016-5424.
To allow testing of names with spaces, change the pg_regress
command-line options --create-role and --dbname to split their arguments
by comma only, not space or comma as before. Only commas were actually
used in existing uses.
Noah Misch, Michael Paquier, Peter Eisentraut
This is similar to the -N option in pg_dump, except that it doesn't take
a pattern, just like the existing -n option in pg_restore.
From: Michael Banck <michael.banck@credativ.de>
Previously, if a schema was created by an extension, a normal pg_dump run
(not --binary-upgrade) would summarily skip every object in that schema.
In a case where an extension creates a schema and then users create other
objects within that schema, this does the wrong thing: we want pg_dump
to skip the schema but still create the non-extension-owned objects.
There's no easy way to fix this pre-9.6, because in earlier versions the
"dump" status for a schema is just a bool and there's no way to distinguish
"dump me" from "dump my members". However, as of 9.6 we do have enough
state to represent that, so this is a simple correction of the logic in
selectDumpableNamespace.
In passing, make some cosmetic fixes in nearby code.
Martín Marqués, reviewed by Michael Paquier
Discussion: <99581032-71de-6466-c325-069861f1947d@2ndquadrant.com>
If the database has a non-default tablespace, we emitted a TABLESPACE
clause in the CREATE DATABASE command emitted by -C, even if
--no-tablespaces was also specified. This seems wrong, and it's
inconsistent with what pg_dumpall does, so change it. Per bug #14315
from Danylo Hlynskyi.
Back-patch to 9.5. The bug is much older, but it'd be a more invasive
change before 9.5 because dumpDatabase() hasn't got an easy way to get
to the outputNoTablespaces flag. Doesn't seem worth the work given
the lack of previous complaints.
Report: <20160908081953.1402.75347@wrigleys.postgresql.org>
The previous API for this function had it returning a malloc'd string.
That meant that callers had to check for NULL return, which few of them
were doing, and it also meant that callers had to remember to free()
the string later, which required extra logic in most cases.
Instead, make simple_prompt() write into a buffer supplied by the caller.
Anywhere that the maximum required input length is reasonably small,
which is almost all of the callers, we can just use a local or static
array as the buffer instead of dealing with malloc/free.
A fair number of callers used "pointer == NULL" as a proxy for "haven't
requested the password yet". Maintaining the same behavior requires
adding a separate boolean flag for that, which adds back some of the
complexity we save by removing free()s. Nonetheless, this nets out
at a small reduction in overall code size, and considerably less code
than we would have had if we'd added the missing NULL-return checks
everywhere they were needed.
In passing, clean up the API comment for simple_prompt() and get rid
of a very-unnecessary malloc/free in its Windows code path.
This is nominally a bug fix, but it does not seem worth back-patching,
because the actual risk of an OOM failure in any of these places seems
pretty tiny, and all of them are client-side not server-side anyway.
This patch is by me, but it owes a great deal to Michael Paquier
who identified the problem and drafted a patch for fixing it the
other way.
Discussion: <CAB7nPqRu07Ot6iht9i9KRfYLpDaF2ZuUv5y_+72uP23ZAGysRg@mail.gmail.com>
Due to simplistic quoting and confusion of database names with conninfo
strings, roles with the CREATEDB or CREATEROLE option could escalate to
superuser privileges when a superuser next ran certain maintenance
commands. The new coding rule for PQconnectdbParams() calls, documented
at conninfo_array_parse(), is to pass expand_dbname=true and wrap
literal database names in a trivial connection string. Escape
zero-length values in appendConnStrVal(). Back-patch to 9.1 (all
supported versions).
Nathan Bossart, Michael Paquier, and Noah Misch. Reviewed by Peter
Eisentraut. Reported by Nathan Bossart.
Security: CVE-2016-5424
Rename these newly-extern functions with terms more typical of their new
neighbors. No functional changes; a subsequent commit will use them in
more places. Back-patch to 9.1 (all supported versions). Back branches
lack src/fe_utils, so instead rename the functions in place; the
subsequent commit will copy them into the other programs using them.
Security: CVE-2016-5424
The incorrect quoting may have permitted arbitrary command execution.
At a minimum, it gave broader control over the command line to actors
supposed to have control over a single argument. Back-patch to 9.1 (all
supported versions).
Security: CVE-2016-5424
These characters prematurely terminate Windows shell command processing,
causing the shell to execute a prefix of the intended command. The
chief alternative to rejecting these characters was to bypass the
Windows shell with CreateProcess(), but the ability to use such names
has little value. Back-patch to 9.1 (all supported versions).
This change formally revokes support for these characters in database
names and roles names. Don't document this; the error message is
self-explanatory, and too few users would benefit. A future major
release may forbid creation of databases and roles so named. For now,
check only at known weak points in pg_dumpall. Future commits will,
without notice, reject affected names from other frontend programs.
Also extend the restriction to pg_dumpall --dbname=CONNSTR arguments and
--file arguments. Unlike the effects on role name arguments and
database names, this does not reflect a broad policy change. A
migration to CreateProcess() could lift these two restrictions.
Reviewed by Peter Eisentraut.
Security: CVE-2016-5424
Since -c plus -C requests dropping and recreating the target database
as a whole, not dropping individual objects in it, we should assume that
the public schema already exists and need not be created. The previous
coding considered only the state of the -c option, so it would emit
"CREATE SCHEMA public" anyway, leading to an unexpected error in restore.
Back-patch to 9.2. Older versions did not accept -c with -C so the
issue doesn't arise there. (The logic being patched here dates to 8.0,
cf commit 2193121fa, so it's not really wrong that it didn't consider
the case at the time.)
Note that versions before 9.6 will still attempt to emit REVOKE/GRANT
on the public schema; but that happens without -c/-C too, and doesn't
seem to be the focus of this complaint. I considered extending this
stanza to also skip the public schema's ACL, but that would be a
misfeature, as it'd break cases where users intentionally changed that
ACL. The real fix for this aspect is Stephen Frost's work to not dump
built-in ACLs, and that's not going to get back-ported.
Per bugs #13804 and #14271. Solution found by David Johnston and later
rediscovered by me.
Report: <20151207163520.2628.95990@wrigleys.postgresql.org>
Report: <20160801021955.1430.47434@wrigleys.postgresql.org>
With the refactoring of pg_dump to handle components, getOwnedSeqs needs
to be a bit more intelligent regarding which components to dump when.
Specifically, we can't simply use the owning table's components as the
set of components to dump as the table might only be including certain
components while all components of the sequence should be dumped, for
example, when the table is a member of an extension while the sequence
is not.
Handle this by combining the set of components to be dumped for the
sequence explicitly and those to be dumped for the table when setting
the components to be dumped for the sequence.
Also add a number of regression tests around this to, hopefully, catch
any future changes which break the expected behavior.
Discovered by: Philippe BEAUDOIN
Reviewed by: Michael Paquier
To ensure that "make installcheck" can be used safely against an existing
installation, we need to be careful about what global object names
(database, role, and tablespace names) we use; otherwise we might
accidentally clobber important objects. There's been a weak consensus that
test databases should have names including "regression", and that test role
names should start with "regress_", but we didn't have any particular rule
about tablespace names; and neither of the other rules was followed with
any consistency either.
This commit moves us a long way towards having a hard-and-fast rule that
regression test databases must have names including "regression", and that
test role and tablespace names must start with "regress_". It's not
completely there because I did not touch some test cases in rolenames.sql
that test creation of special role names like "session_user". That will
require some rethinking of exactly what we want to test, whereas the intent
of this patch is just to hit all the cases in which the needed renamings
are cosmetic.
There is no enforcement mechanism in this patch either, but if we don't
add one we can expect that the tests will soon be violating the convention
again. Again, that's not such a cosmetic change and it will require
discussion. (But I did use a quick-hack enforcement patch to find these
cases.)
Discussion: <16638.1468620817@sss.pgh.pa.us>
Dump out the appropriate GRANT/REVOKE commands for databases and
tablespaces from pg_dumpall to replicate what the current state is.
This was broken during the changes to buildACLCommands for 9.6+
servers for pg_init_privs.
The original specification for this called for the deserialization function
to have signature "deserialize(serialtype) returns transtype", which is a
security violation if transtype is INTERNAL (which it always would be in
practice) and serialtype is not (which ditto). The patch blithely overrode
the opr_sanity check for that, which was sloppy-enough work in itself,
but the indisputable reason this cannot be allowed to stand is that CREATE
FUNCTION will reject such a signature and thus it'd be impossible for
extensions to create parallelizable aggregates.
The minimum fix to make the signature type-safe is to add a second, dummy
argument of type INTERNAL. But to lock it down a bit more and make misuse
of INTERNAL-accepting functions less likely, let's get rid of the ability
to specify a "serialtype" for an aggregate and just say that the only
useful serialtype is BYTEA --- which, in practice, is the only interesting
value anyway, due to the usefulness of the send/recv infrastructure for
this purpose. That means we only have to allow "serialize(internal)
returns bytea" and "deserialize(bytea, internal) returns internal" as
the signatures for these support functions.
In passing fix bogus signature of int4_avg_combine, which I found thanks
to adding an opr_sanity check on combinefunc signatures.
catversion bump due to removing pg_aggregate.aggserialtype and adjusting
signatures of assorted built-in functions.
David Rowley and Tom Lane
Discussion: <27247.1466185504@sss.pgh.pa.us>
We disable statement_timeout and lock_timeout during dump and restore, to
prevent any global settings that might exist from breaking routine backups.
Commit c6dda1f48 should have added idle_in_transaction_session_timeout to
that list, but failed to.
Another place where these timeouts get turned off is autovacuum. While
I doubt an idle timeout could fire there, it seems better to be safe than
sorry.
pg_dump issue noted by Bernd Helmle, the other one found by grepping.
Report: <352F9B77DB5D3082578D17BB@eje.land.credativ.lan>
dumpAccessMethod() didn't get the memo that we now have a bitfield for
the components which should be dumped instead of a simple boolean.
Correct that by checking if the relevant bit is set for each component
being dumped out (and not dumping it out if it isn't set).
This corrects an issue where CREATE ACCESS METHOD commands were being
included in non-binary-upgrades when an extension included an access
method (as the bloom extensions does).
Also add a regression test to make sure that we only dump out the
ACCESS METHOD commands, when they are part of an extension, when doing
a binary upgrade.
Pointed out by Thom Brown.
Adopt the same solution as in commit aa90e148ca, but this time
let's put the ugliness inside the write_stderr() macro, instead of
expecting each call site to deal with it. Back-port that decision
into psql/common.c where I got the macro from in the first place.
Per gripe from Peter Eisentraut.
Mostly these are just comments but there are a few in documentation
and a handful in code and tests. Hopefully this doesn't cause too much
unnecessary pain for backpatching. I relented from some of the most
common like "thru" for that reason. The rest don't seem numerous
enough to cause problems.
Thanks to Kevin Lyda's tool https://pypi.python.org/pypi/misspellings
Formerly, Unix builds of pg_dump/pg_restore would trap SIGINT and similar
signals and set a flag that was tested in various data-transfer loops.
This was prone to errors of omission (cf commit 3c8aa6654); and even if
the client-side response was prompt, we did nothing that would cause
long-running SQL commands (e.g. CREATE INDEX) to terminate early.
Also, the master process would effectively do nothing at all upon receipt
of SIGINT; the only reason it seemed to work was that in typical scenarios
the signal would also be delivered to the child processes. We should
support termination when a signal is delivered only to the master process,
though.
Windows builds had no console interrupt handler, so they would just fall
over immediately at control-C, again leaving long-running SQL commands to
finish unmolested.
To fix, remove the flag-checking approach altogether. Instead, allow the
Unix signal handler to send a cancel request directly and then exit(1).
In the master process, also have it forward the signal to the children.
On Windows, add a console interrupt handler that behaves approximately
the same. The main difference is that a single execution of the Windows
handler can send all the cancel requests since all the info is available
in one process, whereas on Unix each process sends a cancel only for its
own database connection.
In passing, fix an old problem that DisconnectDatabase tends to send a
cancel request before exiting a parallel worker, even if nothing went
wrong. This is at least a waste of cycles, and could lead to unexpected
log messages, or maybe even data loss if it happened in pg_restore (though
in the current code the problem seems to affect only pg_dump). The cause
was that after a COPY step, pg_dump was leaving libpq in PGASYNC_BUSY
state, causing PQtransactionStatus() to report PQTRANS_ACTIVE. That's
normally harmless because the next PQexec() will silently clear the
PGASYNC_BUSY state; but in a parallel worker we might exit without any
additional SQL commands after a COPY step. So add an extra PQgetResult()
call after a COPY to allow libpq to return to PGASYNC_IDLE state.
This is a bug fix, IMO, so back-patch to 9.3 where parallel dump/restore
were introduced.
Thanks to Kyotaro Horiguchi for Windows testing and code suggestions.
Original-Patch: <7005.1464657274@sss.pgh.pa.us>
Discussion: <20160602.174941.256342236.horiguchi.kyotaro@lab.ntt.co.jp>
Parallel dump did a totally pointless query to find out the name of each
table to be dumped, which it already knows. Parallel restore runs issued
lots of redundant SET commands because _doSetFixedOutputState() was invoked
once per TOC item rather than just once at connection start. While the
extra queries are insignificant if you're dumping or restoring large
tables, it still seems worth getting rid of them.
Also, give the responsibility for selecting the right client_encoding for
a parallel dump worker to setup_connection() where it naturally belongs,
instead of having ad-hoc code for that in CloneArchive(). And fix some
minor bugs like use of strdup() where pg_strdup() would be safer.
Back-patch to 9.3, mostly to keep the branches in sync in an area that
we're still finding bugs in.
Discussion: <5086.1464793073@sss.pgh.pa.us>
Parallel restore from directory format failed to respond to control-C
in a timely manner, because there were no checkAborting() calls in the
code path that reads data from a file and sends it to the backend.
If any worker was in the midst of restoring data for a large table,
you'd just have to wait.
This fix doesn't do anything for the problem of aborting a long-running
server-side command, but at least it fixes things for data transfers.
Back-patch to 9.3 where parallel restore was introduced.
This was effectively dead code, since the places that tested it could not
be reached after we entered the on-exit-cleanup routine that would set it.
It seems to have been a leftover from a design in which error abort would
try to send fresh commands to the workers --- a design which could never
have worked reliably, of course. Since the flag is not cross-platform, it
complicates reasoning about the code's behavior, which we could do without.
Although this is effectively just cosmetic, back-patch anyway, because
there are some actual bugs in the vicinity of this behavior.
Discussion: <15583.1464462418@sss.pgh.pa.us>
The commentary in this file was in extremely sad shape. The author(s)
had clearly never heard of the project convention that a function header
comment should provide an API spec of some sort for that function. Much
of it was flat out wrong, too --- maybe it was accurate when written, but
if so it had not been updated to track subsequent code revisions. Rewrite
and rearrange to try to bring it up to speed, and annotate some of the
places where more work is needed. (I've refrained from actually fixing
anything of substance ... yet.)
Also, rename a couple of functions for more clarity as to what they do,
do some very minor code rearrangement, remove some pointless Asserts,
fix an incorrect Assert in readMessageFromPipe, and add a missing socket
close in one error exit from pgpipe(). The last would be a bug if we
tried to continue after pgpipe() failure, but since we don't, it's just
cosmetic at present.
Although this is only cosmetic, back-patch to 9.3 where parallel.c was
added. It's sufficiently invasive that it'll pose a hazard for future
back-patching if we don't.
Discussion: <25239.1464386067@sss.pgh.pa.us>
Since we start the worker threads with _beginthreadex(), we should use
_endthreadex() to terminate them. We got this right in the normal-exit
code path, but not so much during an error exit from a worker.
In addition, be sure to apply CloseHandle to the thread handle after
each thread exits.
It's not clear that these oversights cause any user-visible problems,
since the pg_dump run is about to terminate anyway. Still, it's clearly
better to follow Microsoft's API specifications than ignore them.
Also a few cosmetic cleanups in WaitForTerminatingWorkers(), including
being a bit less random about where to cast between uintptr_t and HANDLE,
and being sure to clear the worker identity field for each dead worker
(not that false matches should be possible later, but let's be careful).
Original observation and patch by Armin Schöffmann, cosmetic improvements
by Michael Paquier and me. (Armin's patch also included closing sockets
in ShutdownWorkersHard(), but that's been dealt with already in commit
df8d2d8c4.) Back-patch to 9.3 where parallel pg_dump was introduced.
Discussion: <zarafa.570306bd.3418.074bf1420d8f2ba2@root.aegaeon.de>
Getting a synchronized snapshot is not supported on a hot standby node,
and is by default taken when using -j with multiple sessions. Trying to
do so still failed, but with a server error that would also go in the
log. Instead, proprely detect this case and give a better error message.
For some reason the code to emit a warning and switch to uncompressed
output was placed down in the guts of pg_backup_archiver.c. This is
definitely too late in the case of parallel operation (and I rather
wonder if it wasn't too late for other purposes as well). Put it in
pg_dump.c's option-processing logic, which seems a much saner place.
Also, the default behavior with custom or directory output format was
to emit the warning telling you the output would be uncompressed. This
seems unhelpful, so silence that case.
Back-patch to 9.3 where parallel dump was introduced.
Kyotaro Horiguchi, adjusted a bit by me
Report: <20160526.185551.242041780.horiguchi.kyotaro@lab.ntt.co.jp>
The Windows coding of ShutdownWorkersHard() thought that setting termEvent
was sufficient to make workers exit after an error. But that only helps
if a worker is busy and passes through checkAborting(). An idle worker
will just sit, resulting in pg_dump failing to exit until the user gives up
and hits control-C. We should close the write end of the command pipe
so that idle workers will see socket EOF and exit, as the Unix coding was
already doing.
Back-patch to 9.3 where parallel pg_dump was introduced.
Kyotaro Horiguchi
In the original design for parallel dump, worker processes reported errors
by sending them up to the master process, which would print the messages.
This is unworkably fragile for a couple of reasons: it risks deadlock if a
worker sends an error at an unexpected time, and if the master has already
died for some reason, the user will never get to see the error at all.
Revert that idea and go back to just always printing messages to stderr.
This approach means that if all the workers fail for similar reasons (eg,
bad password or server shutdown), the user will see N copies of that
message, not only one as before. While that's slightly annoying, it's
certainly better than not seeing any message; not to mention that we
shouldn't assume that only the first failure is interesting.
An additional problem in the same area was that the master failed to
disable SIGPIPE (at least until much too late), which meant that sending a
command to an already-dead worker would cause the master to crash silently.
That was bad enough in itself but was made worse by the total reliance on
the master to print errors: even if the worker had reported an error, you
would probably not see it, depending on timing. Instead disable SIGPIPE
right after we've forked the workers, before attempting to send them
anything.
Additionally, the master relies on seeing socket EOF to realize that a
worker has exited prematurely --- but on Windows, there would be no EOF
since the socket is attached to the process that includes both the master
and worker threads, so it remains open. Make archive_close_connection()
close the worker end of the sockets so that this acts more like the Unix
case. It's not perfect, because if a worker thread exits without going
through exit_nicely() the closures won't happen; but that's not really
supposed to happen.
This has been wrong all along, so back-patch to 9.3 where parallel dump
was introduced.
Report: <2458.1450894615@sss.pgh.pa.us>
When pulling the list of roles to drop, exclude roles whose names
begin with "pg_" (as we do when we are dumping the roles out to
recreate them).
Also add regression tests to cover pg_dumpall -c and this specific
issue.
Noticed by Rushabh Lathia. Patch by me.
All of the other tables used in the query in dumpTable(), which is
collecting column-level ACLs, are qualified, so we should be qualifying
the pg_init_privs, the related sub-select against pg_class and the
other queries added by the pg_dump catalog ACLs work.
Also, use ::regclass (or ::pg_catalog.regclass, where appropriate)
instead of using a poorly constructed query to get the OID for various
catalog tables.
Issues identified by Noah and Alvaro, patch by me.
It emerges that some Perl versions before 5.8.9 have a bug with regexps
that use the /m flag and contain "$". This is the reason why jacana
is still failing on HEAD, and I was able to duplicate the failure on
prairiedog's host. There's no real need for "$" in these patterns,
since they are already matching through the statement-terminating
semicolons (or matching an explicit \n in some cases). So just
remove it.
Note: the reason jacana hasn't actually reported any failures in the
last little while is that the way the pg_dump TAP tests are set up, any
failure of this sort results in echoing the entire pg_dump dump output
to stderr. Since there were about a hundred such failures, that resulted
in a 30MB log file which choked the buildfarm upload script. There is
room for improvement here :-(.
Per off-list discussion with Andrew and Stephen.
Buildfarm member jacana appears to have an issue with running this
test. It's not entirely clear to me why, but rather than try to
fight with it, just disable it for now.
None of the other tests try to write out from psql directly as
this test does, so it seems likely that the rest of the tests will
be fine (as they have been on numerous other systems).
We need to use a new branch due to the 9.5 addition of bypassrls
when adding in the clause to exclude pg_* roles from being dumped
by pg_dumpall.
Pointed out by Noah, patch by me.
The Makefile for test_pg_dump shouldn't have a MODULES_big line
because there's no actual compiled bit for that extension. Hopefully
this will fix the Windows buildfarm members which were complaining.
In passing, also add the 'prove_installcheck' bit to the pg_dump and
test_pg_dump Makefiles, to get the buildfarm members to actually run
those tests.
This TAP test suite will create a new cluster, populate it based on
the 'create_sql' values in the '%tests' hash, run all of the runs
defined in the '%pgdump_runs' hash, and then for each test in the
'%tests' hash, compare each run's output the the regular expression
defined for the test under the 'like' and 'unlike' functions, as
appropriate.
While this test suite covers a fair bit of ground (67% of pg_dump.c
and quite a bit of the other files in src/bin/pg_dump), there is
still quite a bit which remains to be added to provide better code
coverage. Still, this is quite a bit better than we had, and has
found a few bugs already (note that the CREATE TRANSFORM test is
commented out, as it is currently failing).
Idea for using the TAP system from Tom, though all of the code is mine.
Reviewing the cases where we need to LOCK a given table during a dump,
it was pointed out by Tom that we really don't need to LOCK a table if
we are only looking to dump the ACL for it, or certain other
components. After reviewing the queries run for all of the component
pieces, a list of components were determined to not require LOCK'ing
of the table.
This implements a check to avoid LOCK'ing those tables.
Initial complaint from Rushabh Lathia, discussed with Robert and Tom,
the patch is mine.
Do not try to dump objects which do not have ACLs when only ACLs are
being requested. This results in a significant performance improvement
as we can avoid querying for further information on these objects when
we don't need to.
When limiting the components to dump for an extension, consider what
components have been requested. Initially, we incorrectly hard-coded
the components of the extension objects to dump, which would mean that
we wouldn't dump some components even with they were asked for and in
other cases we would dump components which weren't requested.
Correct defaultACLs to use 'dump_contains' instead of 'dump'. The
defaultACL is considered a member of the namespace and should be
dumped based on the same set of components that the other objects in
the schema are, not based on what we're dumping for the namespace
itself (which might not include ACLs, if the namespace has just the
default or initial ACL).
Use DUMP_COMPONENT_ACL for from-initdb objects, to allow users to
change their ACLs, should they wish to. This just extends what we
are doing for the pg_catalog namespace to objects which are not
members of namespaces.
Due to column ACLs being treated a bit differently from other ACLs
(they are actually reset to NULL when all privileges are revoked),
adjust the query which gathers column-level ACLs to consider all of
the ACL-relevant columns.
The query to grab the function/aggregate information is now joining
to pg_init_privs, so we can simplify (and correct) the WHERE clause
used to determine if a given function's ACL has changed from the
initial ACL on the function.
Bug found by Noah, patch by me.
Move fmtReloptionsArray() from pg_dump.c to string_utils.c so that it
is available to other frontend code. In particular psql's \ev and \sv
commands need it to handle view reloptions. Also rename the function
to appendReloptionsArray(), which is a more accurate description of
what it does.
Author: Dean Rasheed
Reviewed-by: Peter Eisentraut
Discussion: http://www.postgresql.org/message-id/CAEZATCWZjCgKRyM-agE0p8ax15j9uyQoF=qew7D2xB6cF76T8A@mail.gmail.com
As reported by Michael Feld, pg_upgrade'ing an installation having
extensions with operator families that contain just a single operator class
failed to reproduce the extension membership of those operator families.
This caused no immediate ill effects, but would create problems when later
trying to do a plain dump and restore, because the seemingly-not-part-of-
the-extension operator families would appear separately in the pg_dump
output, and then would conflict with the families created by loading the
extension. This has been broken ever since extensions were introduced,
and many of the standard contrib extensions are affected, so it's a bit
astonishing nobody complained before.
The cause of the problem is a perhaps-ill-considered decision to omit
such operator families from pg_dump's output on the grounds that the
CREATE OPERATOR CLASS commands could recreate them, and having explicit
CREATE OPERATOR FAMILY commands would impede loading the dump script into
pre-8.3 servers. Whatever the merits of that decision when 8.3 was being
written, it looks like a poor tradeoff now. We can fix the pg_upgrade
problem simply by removing that code, so that the operator families are
dumped explicitly (and then will be properly made to be part of their
extensions).
Although this fixes the behavior of future pg_upgrade runs, it does nothing
to clean up existing installations that may have improperly-linked operator
families. Given the small number of complaints to date, maybe we don't
need to worry about providing an automated solution for that; anyone who
needs to clean it up can do so with manual "ALTER EXTENSION ADD OPERATOR
FAMILY" commands, or even just ignore the duplicate-opfamily errors they
get during a pg_restore. In any case we need this fix.
Back-patch to all supported branches.
Discussion: <20228.1460575691@sss.pgh.pa.us>
Coverity complained about this resource leak (why now, I don't know,
since it's been like that a long time). Our general policy in pg_dump
is that PQExpBuffers are worth cleaning up, so do it here too. But
don't bother with a back-patch, because it seems unlikely that very
many databases contain enough FOREIGN SERVER objects to notice.
This will prevent users from creating roles which begin with "pg_" and
will check for those roles before allowing an upgrade using pg_upgrade.
This will allow for default roles to be provided at initdb time.
Reviews by José Luis Tallón and Robert Haas
Pretty sure I removed this based on some incorrect thinking that it was
no longer possible to reach this point for a table which will not be
dumped, but that's clearly wrong.
Pointed out on IRC by Erik Rijkers.
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
Now that all of the infrastructure exists, add in the ability to
dump out the ACLs of the objects inside of pg_catalog or the ACLs
for objects which are members of extensions, but only if they have
been changed from their original values.
The original values are tracked in pg_init_privs. When pg_dump'ing
9.6-and-above databases, we will dump out the ACLs for all objects
in pg_catalog and the ACLs for all extension members, where the ACL
has been changed from the original value which was set during either
initdb or CREATE EXTENSION.
This should not change dumps against pre-9.6 databases.
Reviews by Alexander Korotkov, Jose Luis Tallon
Historically, the "dump" component of the namespace has been used
to decide if the objects inside of the namespace should be dumped
also. Given that "dump" is now a bitmask and may be partial, and
we may want to dump out all components of the namespace object but
only some of the components of objects contained in the namespace,
create a "dump_contains" bitmask which will represent what components
of the objects inside of a namespace should be dumped out.
No behavior change here, but in preparation for a change where we
will dump out just the ACLs of objects in pg_catalog, but we might
not dump out the ACL of the pg_catalog namespace itself (for instance,
when it hasn't been changed from the value set at initdb time).
Reviews by Alexander Korotkov, Jose Luis Tallon
pg_dump has historically used a simple boolean 'dump' value to indicate
if a given object should be included in the dump or not. Instead, use
a bitmap which breaks down the components of an object into their
distinct pieces and use that bitmap to only include the components
requested.
This does not include any behavioral change, but is in preperation for
the change to dump out just ACLs for objects in pg_catalog.
Reviews by Alexander Korotkov, Jose Luis Tallon
Some object types have names that are only unique for one table. But
for those we generally didn't put the table name into the dump TOC tag.
So it was impossible to identify these objects if the same name was used
for multiple tables. This affects policies, column defaults,
constraints, triggers, and rules.
Fix by adding the table name to the TOC tag, so that it now reads
"$schema $table $object".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This is necessary infrastructure for supporting parallel aggregation
for aggregates whose transition type is "internal". Such values
can't be passed between cooperating processes, because they are
just pointers.
David Rowley, reviewed by Tomas Vondra and by me.
Some of the non-MSVC Windows buildfarm members seem to need this to avoid
getting "undefined symbol" errors on libpgfeutils' references to libpq.
I could understand that if libpq were a static library, but surely it is
not? Oh well, at least the extra reference is no more harmful than it is
for libpgcommon or libpgport.
Per discussion, we want to create a static library and put the stuff into
it that until now has been shared across src/bin/ directories by ad-hoc
methods like symlinking a source file. This commit creates the library and
populates it with a couple of files that contain the widely-useful portions
of pg_dump's dumputils.c file. dumputils.c survives, because it has some
stuff that didn't seem appropriate for fe_utils, but it's significantly
smaller and is no longer referenced from any other directory.
Follow-on patches will move more stuff into fe_utils.
The Mkvcbuild.pm hacking here is just a best guess; we'll see how the
buildfarm likes it.
This enables external code to create access methods. This is useful so
that extensions can add their own access methods which can be formally
tracked for dependencies, so that DROP operates correctly. Also, having
explicit support makes pg_dump work correctly.
Currently only index AMs are supported, but we expect different types to
be added in the future.
Authors: Alexander Korotkov, Petr Jelínek
Reviewed-By: Teodor Sigaev, Petr Jelínek, Jim Nasby
Commitfest-URL: https://commitfest.postgresql.org/9/353/
Discussion: https://www.postgresql.org/message-id/CAPpHfdsXwZmojm6Dx+TJnpYk27kT4o7Ri6X_4OSWcByu1Rm+VA@mail.gmail.com
Now that we have src/common/ for code shared between frontend and backend,
we can get rid of (most of) the klugy ways that the keyword table and
keyword lookup code were formerly shared between different uses.
This is a first step towards a more general plan of getting rid of
special-purpose kluges for sharing code in src/bin/.
I chose to merge kwlookup.c back into keywords.c, as it once was, and
always has been so far as keywords.h is concerned. We could have
kept them separate, but there is noplace that uses ScanKeywordLookup
without also wanting access to the backend's keyword list, so there
seems little point.
ecpg is still a bit weird, but at least now the trickiness is documented.
I think that the MSVC build script should require no adjustments beyond
what's done here ... but we'll soon find out.
It was using %u to read a string that was earlier produced by snprintf with %d
into a signed integer variable. This seems to work in practice but is
incorrect.
found by cppcheck
If a view is split into CREATE TABLE + CREATE RULE to break a circular
dependency, then any triggers on the view must be dumped/reloaded after
the CREATE RULE; else the backend may reject the CREATE TRIGGER because
it's the wrong type of trigger for a plain table. This works all right
in plain dump/restore because of pg_dump's sorting heuristic that places
triggers after rules. However, when using parallel restore, the ordering
must be enforced by a dependency --- and we didn't have one.
Fixing this is a mere matter of adding an addObjectDependency() call,
except that we need to be able to find all the triggers belonging to the
view relation, and there was no easy way to do that. Add fields to
pg_dump's TableInfo struct to remember where the associated TriggerInfo
struct(s) are.
Per bug report from Dennis Kögel. The failure can be exhibited at least
as far back as 9.1, so back-patch to all supported branches.
The original code was adding double quotes to an already-quoted
identifier, leading to nonsensical results. Remove the quoting call.
I introduced the broken code in 7eca575d1c of 9.5 era, so backpatch to
9.5.
Report and patch by Elvis Pranskevichus
Reviewed by Michael Paquier
Peter Eisentraut
Robert Haas
Tom Lane
Alvaro Herrera
Stephen Frost
Heikki Linnakangas
Bruce Momjian
Andrew Dunstan
Teodor Sigaev
Simon Riggs
Andres Freund
Noah Misch
Greg Stark
Magnus Hagander
Dean Rasheed