Author: Pavel Stěhule, editorialized somewhat by Álvaro Herrera
Reviewed-by: Tomáš Vondra, Marko Tiikkaja
With input from Fabrízio de Royes Mello, Jim Nasby
pg_class is a special case for CLUSTER and VACUUM FULL, so although
commit 3cff1879f8 caused these
operations to advance relfrozenxid and relminmxid for all other
tables, it did not provide the same benefit for pg_class. This
plugs that gap.
Andres Freund
I changed the loop in 9.3 to use "goto send_failure" instead of "break" on
errors, but I missed this one case. It was a relatively harmless bug: if
the flush fails once it will most likely fail again as soon as we try to
flush the output again. But it's a bug nevertheless.
Report and fix by Andres Freund.
This feature, building on previous commits, allows the write-ahead log
stream to be decoded into a series of logical changes; that is,
inserts, updates, and deletes and the transactions which contain them.
It is capable of handling decoding even across changes to the schema
of the effected tables. The output format is controlled by a
so-called "output plugin"; an example is included. To make use of
this in a real replication system, the output plugin will need to be
modified to produce output in the format appropriate to that system,
and to perform filtering.
Currently, information can be extracted from the logical decoding
system only via SQL; future commits will add the ability to stream
changes via walsender.
Andres Freund, with review and other contributions from many other
people, including Álvaro Herrera, Abhijit Menon-Sen, Peter Gheogegan,
Kevin Grittner, Robert Haas, Heikki Linnakangas, Fujii Masao, Abhijit
Menon-Sen, Michael Paquier, Simon Riggs, Craig Ringer, and Steve
Singer.
Because of the new SLOT clause in the START_REPLICATION command, it's
possible for the command to end up too long for the old maximum buffer
length.
Andres Freund
Additional non-security issues/improvements spotted by Coverity.
In backend/libpq, no sense trying to protect against port->hba being
NULL after we've already dereferenced it in the switch() statement.
Prevent against possible overflow due to 32bit arithmitic in
basebackup throttling (not yet released, so no security concern).
Remove nonsensical check of array pointer against NULL in procarray.c,
looks to be a holdover from 9.1 and earlier when there were pointers
being used but now it's just an array.
Remove pointer check-against-NULL in tsearch/spell.c as we had already
dereferenced it above (in the strcmp()).
Remove dead code from adt/orderedsetaggs.c, isnull is checked
immediately after each tuplesort_getdatum() call and if true we return,
so no point checking it again down at the bottom.
Remove recently added minor error-condition memory leak in pg_regress.
A number of issues were identified by the Coverity scanner and are
addressed in this patch. None of these appear to be security issues
and many are mostly cosmetic changes.
Short comments for each of the changes follows.
Correct the semi-colon placement in be-secure.c regarding SSL retries.
Remove a useless comparison-to-NULL in proc.c (value is dereferenced
prior to this check and therefore can't be NULL).
Add checking of chmod() return values to initdb.
Fix a couple minor memory leaks in initdb.
Fix memory leak in pg_ctl- involves free'ing the config file contents.
Use an int to capture fgetc() return instead of an enum in pg_dump.
Fix minor memory leaks in pg_dump.
(note minor change to convertOperatorReference()'s API)
Check fclose()/remove() return codes in psql.
Check fstat(), find_my_exec() return codes in psql.
Various ECPG memory leak fixes.
Check find_my_exec() return in ECPG.
Explicitly ignore pqFlush return in libpq error-path.
Change PQfnumber() to avoid doing an strdup() when no changes required.
Remove a few useless check-against-NULL's (value deref'd beforehand).
Check rmtree(), malloc() results in pg_regress.
Also check get_alternative_expectfile() return in pg_regress.
The regex code didn't have any provision for query cancel; which is
unsurprising given its non-Postgres origin, but still problematic since
some operations can take a long time. Introduce a callback function to
check for a pending query cancel or session termination request, and
call it in a couple of strategic spots where we can make the regex code
exit with an error indicator.
If we ever actually split out the regex code as a standalone library,
some additional work will be needed to let the cancel callback function
be specified externally to the library. But that's straightforward
(certainly so by comparison to putting the locale-dependent character
classification logic on a similar arms-length basis), and there seems
no need to do it right now.
A bigger issue is that there may be more places than these two where
we need to check for cancels. We can always add more checks later,
now that the infrastructure is in place.
Since there are known examples of not-terribly-long regexes that can
lock up a backend for a long time, back-patch to all supported branches.
I have hopes of fixing the known performance problems later, but adding
query cancel ability seems like a good idea even if they were all fixed.
Commit abf5c5c9a4 added a bogus while-
statement after the for(;;)-loop. It went unnoticed in testing, because
it was dead code.
Report by KONDO Mitsumasa. Backpatch to 9.3. The commit that introduced
this was also applied to 9.2, but not the bogus while-loop part, because
the code in 9.2 looks quite different.
A new MAX_RATE option allows imposing a limit to the network transfer
rate from the server side. This is useful to limit the stress that
taking a base backup has on the server.
pg_basebackup is now able to specify a value to the server, too.
Author: Antonin Houska
Patch reviewed by Stefan Radomski, Andres Freund, Zoltán Böszörményi,
Fujii Masao, and Álvaro Herrera.
We were resetting the tuple's HEAP_HOT_UPDATED flag as well as t_ctid on
WAL replay of a tuple-lock operation, which is incorrect when the tuple
is already updated.
Back-patch to 9.3. The clearing of both header elements was there
previously, but since no update could be present on a tuple that was
being locked, it was harmless.
Bug reported by Peter Geoghegan and Greg Stark in
CAM3SWZTMQiCi5PV5OWHb+bYkUcnCk=O67w0cSswPvV7XfUcU5g@mail.gmail.com and
CAM-w4HPTOeMT4KP0OJK+mGgzgcTOtLRTvFZyvD0O4aH-7dxo3Q@mail.gmail.com
respectively; diagnosis by Andres Freund.
json_to_record() depends on get_call_result_type() for the tuple
descriptor of the record that should be returned, but in some cases
that cannot be determined. Add a guard to check if the tuple
descriptor has been properly resolved, similar to other callers of
get_call_result_type().
Also add guard for two other callers of get_call_result_type() in
jsonfuncs.c. Although json_to_record() is the only actual bug, it's a
good idea to follow convention.
If there are lots of uncommitted tuples at the end of the index range,
get_actual_variable_range() ends up fetching each one and doing an MVCC
visibility check on it, until it finally hits a visible tuple. This is
bad enough in isolation, considering that we don't need an exact answer
only an approximate one. But because the tuples are not yet committed,
each visibility check does a TransactionIdIsInProgress() test, which
involves scanning the ProcArray. When multiple sessions do this
concurrently, the ensuing contention results in horrid performance loss.
20X overall throughput loss on not-too-complicated queries is easy to
demonstrate in the back branches (though someone's made it noticeably
less bad in HEAD).
We can dodge the problem fairly effectively by using SnapshotDirty rather
than a normal MVCC snapshot. This will cause the index probe to take
uncommitted tuples as good, so that we incur only one tuple fetch and test
even if there are many such tuples. The extent to which this degrades the
estimate is debatable: it's possible the result is actually a more accurate
prediction than before, if the endmost tuple has become committed by the
time we actually execute the query being planned. In any case, it's not
very likely that it makes the estimate a lot worse.
SnapshotDirty will still reject tuples that are known committed dead, so
we won't give bogus answers if an invalid outlier has been deleted but not
yet vacuumed from the index. (Because btrees know how to mark such tuples
dead in the index, we shouldn't have a big performance problem in the case
that there are many of them at the end of the range.) This consideration
motivates not using SnapshotAny, which was also considered as a fix.
Note: the back branches were using SnapshotNow instead of an MVCC snapshot,
but the problem and solution are the same.
Per performance complaints from Bartlomiej Romanski, Josh Berkus, and
others. Back-patch to 9.0, where the issue was introduced (by commit
40608e7f94).
- Write HIGH:MEDIUM instead of DEFAULT:!LOW:!EXP for clarity.
- Order 3DES last to work around inappropriate OpenSSL default.
- Remove !MD5 and @STRENGTH, because they are irrelevant.
- Add clarifying documentation.
Effectively, the new default is almost the same as the old one, but it
is arguably easier to understand and modify.
Author: Marko Kreen <markokr@gmail.com>
Space trimming rather than space-padding causes unusual behavior, which
might not be standards-compliant.
Also remove recently-added now-redundant C comment.
A large majority of the callers of pg_do_encoding_conversion were
specifying the database encoding as either source or target of the
conversion, meaning that we can use the less general functions
pg_any_to_server/pg_server_to_any instead.
The main advantage of using the latter functions is that they can make use
of a cached conversion-function lookup in the common case that the other
encoding is the current client_encoding. It's notationally cleaner too in
most cases, not least because of the historical artifact that the latter
functions use "char *" rather than "unsigned char *" in their APIs.
Note that pg_any_to_server will apply an encoding verification step in
some cases where pg_do_encoding_conversion would have just done nothing.
This seems to me to be a good idea at most of these call sites, though
it partially negates the performance benefit.
Per discussion of bug #9210.
Various places assume that pg_do_encoding_conversion() and
pg_server_to_any() will ensure encoding validity of their results;
but they failed to do so in the case that the source encoding is SQL_ASCII
while the destination is not. We cannot perform any actual "conversion"
in that scenario, but we should still validate the string according to the
destination encoding. Per bug #9210 from Digoal Zhou.
Arguably this is a back-patchable bug fix, but on the other hand adding
more enforcing of encoding checks might break existing applications that
were being sloppy. On balance there doesn't seem to be much enthusiasm
for a back-patch, so fix in HEAD only.
While at it, remove some apparently-no-longer-needed provisions for
letting pg_do_encoding_conversion() "work" outside a transaction ---
if you consider it "working" to silently fail to do the requested
conversion.
Also, make a few cosmetic improvements in mbutils.c, notably removing
some Asserts that are certainly dead code since the variables they
assert aren't null are never null, even at process start. (I think
this wasn't true at one time, but it is now.)
Most estimation functions apply estimate_expression_value to see if they
can reduce an expression to a constant; the key difference is that it
allows evaluation of stable as well as immutable functions in hopes of
ending up with a simple Const node. scalararraysel didn't get the memo
though, and neither did gincost_opexpr/gincost_scalararrayopexpr. Fix
that, and remove a now-unnecessary estimate_expression_value step in the
subsidiary function scalararraysel_containment.
Per complaint from Alexey Klyukin. Back-patch to 9.3. The problem
goes back further, but I'm hesitant to change estimation behavior in
long-stable release branches.
The functions in slotfuncs.c don't exist in any released version,
but the changes to xlogfuncs.c represent backward-incompatibilities.
Per discussion, we're hoping that the queries using these functions
are few enough and simple enough that this won't cause too much
breakage for users.
Michael Paquier, reviewed by Andres Freund and further modified
by me.
Change input function error messages to be more consistent with what is
done elsewhere. Remove a bunch of redundant type casts, so that the
compiler will warn us if we screw up. Don't pass LSNs by value on
platforms where a Datum is only 32 bytes, per buildfarm. Move macros
for packing and unpacking LSNs to pg_lsn.h so that we can include
access/xlogdefs.h, to avoid an unsatisfied dependency on XLogRecPtr.
The SQL standard says that OVERLAPS should have a two-element row
constructor on each side. The original coding of OVERLAPS support in
our grammar attempted to extend that by allowing a single-element row
constructor, which it internally duplicated ... or tried to, anyway.
But that code has certainly not worked since our List infrastructure was
rewritten in 2004, and I'm none too sure it worked before that. As it
stands, it ends up building a List that includes itself, leading to
assorted undesirable behaviors later in the parser.
Even if it worked as intended, it'd be a bit evil because of the
possibility of duplicate evaluation of a volatile function that the user
had written only once. Given the lack of documentation, test cases, or
complaints, let's just get rid of the idea and only support the standard
syntax.
While we're at it, improve the error cursor positioning for the
wrong-number-of-arguments errors, and inline the makeOverlaps() function
since it's only called in one place anyway.
Per bug #9227 from Joshua Yanovski. Initial patch by Joshua Yanovski,
extended a bit by me.
Coverity identified a number of places in which it couldn't prove that a
string being copied into a fixed-size buffer would fit. We believe that
most, perhaps all of these are in fact safe, or are copying data that is
coming from a trusted source so that any overrun is not really a security
issue. Nonetheless it seems prudent to forestall any risk by using
strlcpy() and similar functions.
Fixes by Peter Eisentraut and Jozef Mlich based on Coverity reports.
In addition, fix a potential null-pointer-dereference crash in
contrib/chkpass. The crypt(3) function is defined to return NULL on
failure, but chkpass.c didn't check for that before using the result.
The main practical case in which this could be an issue is if libc is
configured to refuse to execute unapproved hashing algorithms (e.g.,
"FIPS mode"). This ideally should've been a separate commit, but
since it touches code adjacent to one of the buffer overrun changes,
I included it in this commit to avoid last-minute merge issues.
This issue was reported by Honza Horak.
Security: CVE-2014-0065 for buffer overruns, CVE-2014-0066 for crypt()
Several functions, mostly type input functions, calculated an allocation
size such that the calculation wrapped to a small positive value when
arguments implied a sufficiently-large requirement. Writes past the end
of the inadvertent small allocation followed shortly thereafter.
Coverity identified the path_in() vulnerability; code inspection led to
the rest. In passing, add check_stack_depth() to prevent stack overflow
in related functions.
Back-patch to 8.4 (all supported versions). The non-comment hstore
changes touch code that did not exist in 8.4, so that part stops at 9.0.
Noah Misch and Heikki Linnakangas, reviewed by Tom Lane.
Security: CVE-2014-0064
If the name lookups come to different conclusions due to concurrent
activity, we might perform some parts of the DDL on a different table
than other parts. At least in the case of CREATE INDEX, this can be
used to cause the permissions checks to be performed against a
different table than the index creation, allowing for a privilege
escalation attack.
This changes the calling convention for DefineIndex, CreateTrigger,
transformIndexStmt, transformAlterTableStmt, CheckIndexCompatible
(in 9.2 and newer), and AlterTable (in 9.1 and older). In addition,
CheckRelationOwnership is removed in 9.2 and newer and the calling
convention is changed in older branches. A field has also been added
to the Constraint node (FkConstraint in 8.4). Third-party code calling
these functions or using the Constraint node will require updating.
Report by Andres Freund. Patch by Robert Haas and Andres Freund,
reviewed by Tom Lane.
Security: CVE-2014-0062
The primary role of PL validators is to be called implicitly during
CREATE FUNCTION, but they are also normal functions that a user can call
explicitly. Add a permissions check to each validator to ensure that a
user cannot use explicit validator calls to achieve things he could not
otherwise achieve. Back-patch to 8.4 (all supported versions).
Non-core procedural language extensions ought to make the same two-line
change to their own validators.
Andres Freund, reviewed by Tom Lane and Noah Misch.
Security: CVE-2014-0061
Granting a role without ADMIN OPTION is supposed to prevent the grantee
from adding or removing members from the granted role. Issuing SET ROLE
before the GRANT bypassed that, because the role itself had an implicit
right to add or remove members. Plug that hole by recognizing that
implicit right only when the session user matches the current role.
Additionally, do not recognize it during a security-restricted operation
or during execution of a SECURITY DEFINER function. The restriction on
SECURITY DEFINER is not security-critical. However, it seems best for a
user testing his own SECURITY DEFINER function to see the same behavior
others will see. Back-patch to 8.4 (all supported versions).
The SQL standards do not conflate roles and users as PostgreSQL does;
only SQL roles have members, and only SQL users initiate sessions. An
application using PostgreSQL users and roles as SQL users and roles will
never attempt to grant membership in the role that is the session user,
so the implicit right to add or remove members will never arise.
The security impact was mostly that a role member could revoke access
from others, contrary to the wishes of his own grantor. Unapproved role
member additions are less notable, because the member can still largely
achieve that by creating a view or a SECURITY DEFINER function.
Reviewed by Andres Freund and Tom Lane. Reported, independently, by
Jonas Sundman and Noah Misch.
Security: CVE-2014-0060
We should not assume that struct timeval.tv_sec is a long, because
it ain't necessarily. (POSIX says that it's a time_t, which might
well be 64 bits now or in the future; or for that matter might be
32 bits on machines with 64-bit longs.) Per buildfarm member panther.
Back-patch to 9.3 where the dubious coding was introduced.
We used to have externs for getopt() and its API variables scattered
all over the place. Now that we find we're going to need to tweak the
variable declarations for Cygwin, it seems like a good idea to have
just one place to tweak.
In this commit, the variables are declared "#ifndef HAVE_GETOPT_H".
That may or may not work everywhere, but we'll soon find out.
Andres Freund
If there is a WAL segment with same ID but different TLI present in both
the WAL archive and pg_xlog, prefer the one with higher TLI. Before this
patch, the archive was polled first, for all expected TLIs, and only if no
file was found was pg_xlog scanned. This was a change in behavior from 9.3,
which first scanned archive and pg_xlog for the highest TLI, then archive
and pg_xlog for the next highest TLI and so forth. This patch reverts the
behavior back to what it was in 9.2.
The reason for this is that if for example you try to do archive recovery
to timeline 2, which branched off timeline 1, but the WAL for timeline 2 is
not archived yet, we would replay past the timeline switch point on
timeline 1 using the archived files, before even looking timeline 2's files
in pg_xlog
Report and patch by Kyotaro Horiguchi. Backpatch to 9.3 where the behavior
was changed.
Previously we were piggybacking on transaction ID parameters to freeze
multixacts; but since there isn't necessarily any relationship between
rates of Xid and multixact consumption, this turns out not to be a good
idea.
Therefore, we now have multixact-specific freezing parameters:
vacuum_multixact_freeze_min_age: when to remove multis as we come across
them in vacuum (default to 5 million, i.e. early in comparison to Xid's
default of 50 million)
vacuum_multixact_freeze_table_age: when to force whole-table scans
instead of scanning only the pages marked as not all visible in
visibility map (default to 150 million, same as for Xids). Whichever of
both which reaches the 150 million mark earlier will cause a whole-table
scan.
autovacuum_multixact_freeze_max_age: when for cause emergency,
uninterruptible whole-table scans (default to 400 million, double as
that for Xids). This means there shouldn't be more frequent emergency
vacuuming than previously, unless multixacts are being used very
rapidly.
Backpatch to 9.3 where multixacts were made to persist enough to require
freezing. To avoid an ABI break in 9.3, VacuumStmt has a couple of
fields in an unnatural place, and StdRdOptions is split in two so that
the newly added fields can go at the end.
Patch by me, reviewed by Robert Haas, with additional input from Andres
Freund and Tom Lane.
We used the length of the input string, not the de-escaped string, as
the trigger for NAMEDATALEN truncation. AFAICS this would only result
in sometimes printing a phony truncation warning; but it's just luck
that there was no worse problem, since we were violating the API spec
for truncate_identifier(). Per bug #9204 from Joshua Yanovski.
This has been wrong since the Unicode-identifier support was added,
so back-patch to all supported branches.
In a database that's not yet reached consistency, it's possible that some
segments of a relation are not full-size but are not the last ones either.
Because of the way smgrnblocks() works, asking for a new page with P_NEW
will fill in the last not-full-size segment --- and if that makes it full
size, the apparent EOF of the relation will increase by more than one page,
so that the next P_NEW request will yield a page past the next consecutive
one. This breaks the relation-extension logic in XLogReadBufferExtended,
possibly allowing a page update to be applied to some page far past where
it was intended to go. This appears to be the explanation for reports of
table bloat on replication slaves compared to their masters, and probably
explains some corrupted-slave reports as well.
Fix the loop to check the page number it actually got, rather than merely
Assert()'ing that dead reckoning got it to the desired place. AFAICT,
there are no other places that make assumptions about exactly which page
they'll get from P_NEW.
Problem identified by Greg Stark, though this is not the same as his
proposed patch.
It's been like this for a long time, so back-patch to all supported
branches.
Get rid of use of dlltool for linking the main postgres executable.
dlltool is obsolete and we'd prefer to stop depending on it.
Also, include $(LDAP_LIBS_FE) in $(libpq_pgport). (It's not clear that
this is really needed, or why it's not a linker bug if it is needed.
But reports are that it's needed on current Cygwin.)
We might want to back-patch this if it works, but first let's see
what the buildfarm thinks.
Marco Atzeri
WakeupWaiters() is supposed to wake up all LW_WAIT_UNTIL_FREE waiters of
the slot, but the loop incorrectly also woke up the first LW_EXCLUSIVE
waiter, if there was no LW_WAIT_UNTIL_FREE waiters in the queue.
Noted by Andres Freund. This code is new in 9.4, so no backpatching.
The shimTriConstistentFn, which calls the opclass's consistent function with
all combinations of TRUE/FALSE for any MAYBE argument, modifies the entryRes
array passed by the caller. Change startScanKey to re-initialize it between
each call to accommodate that.
It's actually a bad habit by shimTriConsistentFn to modify its argument. But
the only caller that doesn't already re-initialize the entryRes array was
startScanKey, and it's easy for startScanKey to do so. Add a comment to
shimTriConsistentFn about that.
Note: this does not give a free pass to opclass-provided consistent
functions to modify the entryRes argument; shimTriConsistent assumes that
they don't, even though it does it itself.
While at it, refactor startScanKey to allocate the requiredEntries and
additionalEntries after it knows exactly how large they need to be. Saves a
little bit of memory, and looks nicer anyway.
Per complaint by Tom Lane, buildfarm and the pg_trgm regression test.
If you have a GIN query like "rare & frequent", we currently fetch all the
items that match either rare or frequent, call the consistent function for
each item, and let the consistent function filter out items that only match
one of the terms. However, if we can deduce that "rare" must be present for
the overall qual to be true, we can scan all the rare items, and for each
rare item, skip over to the next frequent item with the same or greater TID.
That greatly speeds up "rare & frequent" type queries.
To implement that, introduce the concept of a tri-state consistent function,
where the 3rd value is MAYBE, indicating that we don't know if that term is
present. Operator classes only provide a boolean consistent function, so we
simulate the tri-state consistent function by calling the boolean function
several times, with the MAYBE arguments set to all combinations of TRUE and
FALSE. Testing all combinations is only feasible for a small number of MAYBE
arguments, but it is envisioned that we'll provide a way for operator
classes to provide a native tri-state consistent function, which can be much
more efficient. But that is not included in this patch.
We were already using that trick to for lossy pages, calling the consistent
function with the lossy entry set to TRUE and FALSE. Now that we have the
tri-state consistent function, use it for lossy pages too.
Alexander Korotkov, with fair amount of refactoring by me.
We may process relcache flush requests during transaction startup or
shutdown. In general it's not terribly safe to do catalog access at those
times, so the code's habit of trying to immediately revalidate unflushable
relcache entries is risky. Although there are no field trouble reports
that are positively traceable to this, we have been able to demonstrate
failure of the assertions recently added in RelationIdGetRelation() and
SearchCatCache(). On the other hand, it seems safe to just postpone
revalidation of the cache entry until we're inside a valid transaction.
The one case where this is questionable is where we're exiting a
subtransaction and the outer transaction is holding the relcache entry open
--- but if we made any significant changes to the rel inside such a
subtransaction, we've got problems anyway. There are mechanisms in place
to prevent that (to wit, locks for cross-session cases and
CheckTableNotInUse() for intra-session cases), so let's trust to those
mechanisms to keep us out of trouble.
Commit 42c80c696e added an
Assert(IsTransactionState()) in SearchCatCache(), to catch
any code that thought it could do a catcache lookup outside
transactions. Extend the same idea to relcache lookups.
These flushes were added in my commit d2896a9ed, which added the btree
logic that keeps a cached copy of the index metapage data in index relcache
entries. The idea was to ensure that other backends would promptly update
their cached copies after a change. However, this is not really necessary,
since _bt_getroot() has adequate defenses against believing a stale root
page link, and _bt_getrootheight() doesn't have to be 100% right.
Moreover, if it were necessary, a relcache flush would be an unreliable way
to do it, since the sinval mechanism believes that relcache flush requests
represent transactional updates, and therefore discards them on transaction
rollback. Therefore, we might as well drop these flush requests and save
the time to rebuild the whole relcache entry after a metapage change.
If we ever try to support in-place truncation of btree indexes, it might
be necessary to revisit this issue so that _bt_getroot() can't get caught
by trying to follow a metapage link to a page that no longer exists.
A possible solution to that is to make use of an smgr, rather than
relcache, inval request to force other backends to discard their cached
metapages. But for the moment this is not worth pursuing.
Commit a5ff502fce was a brick shy of a load
in the backend lexer too, not just psql. Per further testing of bug #9068.
In passing, improve related comments.
Given a composite-type parameter named x, "$1.*" worked fine, but "x.*"
not so much. This has been broken since named parameter references were
added in commit 9bff0780cf, so patch back
to 9.2. Per bug #9085 from Hardy Falk.
The temporary statistics files don't need to be included in the backup
because they are always reset at the beginning of the archive recovery.
This patch changes pg_basebackup so that it skips all files located in
$PGDATA/pg_stat_tmp or the directory specified by stats_temp_directory
parameter.
Remove unused copy-and-pasted macro definitions, and improve formatting
of recently-added productions.
I got interested in this because buildfarm member protosciurus has been
crashing in "bison repl_gram.y" since commit 858ec11. It's a long shot
that this will fix that, though maybe the missing trailing semicolon
has something to do with it? In any case, there's no need to approve
of dead code, nor of code whose formatting isn't even self-consistent
let alone consistent with what's around it.
In p_isdigit and other character class test functions generated by the
p_iswhat macro, the code path for non-C locales with multibyte encodings
contained a bogus pointer cast that would accidentally fail to malfunction
if types wchar_t and wint_t have the same width. Apparently that is true
on most platforms, but not on recent Cygwin releases. Remove the cast,
as it seems completely unnecessary (I think it arose from a false analogy
to the need to cast to unsigned char when dealing with the <ctype.h>
functions). Per bug #8970 from Marco Atzeri.
In the same functions, the code path for C locale with a multibyte encoding
simply ANDed each wide character with 0xFF before passing it to the
corresponding <ctype.h> function. This could result in false positive
answers for some non-ASCII characters, so use a range test instead.
Noted by me while investigating Marco's complaint.
Also, remove some useless though not actually buggy maskings and casts
in the hand-coded p_isalnum and p_isalpha functions, which evidently
got tested a bit more carefully than the macro-generated functions.
WalSndKill was doing things exactly backwards: it should first clear
MyWalSnd (to stop signal handlers from touching MyWalSnd->latch),
then disown the latch, and only then mark the WalSnd struct unused by
clearing its pid field.
Also, WalRcvSigUsr1Handler and worker_spi_sighup failed to preserve
errno, which is surely a requirement for any signal handler.
Per discussion of recent buildfarm failures. Back-patch as far
as the relevant code exists.
Previously an input array string that started with a single-element
array dimension would then later accept a multi-dimensional segment.
BACKWARD INCOMPATIBILITY
Replication slots are a crash-safe data structure which can be created
on either a master or a standby to prevent premature removal of
write-ahead log segments needed by a standby, as well as (with
hot_standby_feedback=on) pruning of tuples whose removal would cause
replication conflicts. Slots have some advantages over existing
techniques, as explained in the documentation.
In a few places, we refer to the type of replication slots introduced
by this patch as "physical" slots, because forthcoming patches for
logical decoding will also have slots, but with somewhat different
properties.
Andres Freund and Robert Haas
Evidence from buildfarm member crake suggests that the new test_shm_mq
module is routinely crashing the server due to the arrival of a SIGUSR1
after the shared memory segment has been unmapped. Although processes
using the new dynamic background worker facilities are more likely to
receive a SIGUSR1 around this time, the problem is also possible on older
branches, so I'm back-patching the parts of this change that apply to
older branches as far as they apply.
It's already generally the case that code checks whether these pointers
are NULL before deferencing them, so the important thing is mostly to
make sure that they do get set to NULL before they become invalid. But
in master, there's one case in procsignal_sigusr1_handler that lacks a
NULL guard, so add that.
Patch by me; review by Tom Lane.
Commit 820f08cabd claimed to make the server
and libpq handle SSL protocol versions identically, but actually the server
was still accepting SSL v3 protocol while libpq wasn't. Per discussion,
SSL v3 is obsolete, and there's no good reason to continue to accept it.
So make the code really equivalent on both sides. The behavior now is
that we use the highest mutually-supported TLS protocol version.
Marko Kreen, some comment-smithing by me
When pulling a "postponed" qual from a LATERAL subquery up into the quals
of an outer join, we must make sure that the postponed qual is included
in those seen by make_outerjoininfo(). Otherwise we might compute a
too-small min_lefthand or min_righthand for the outer join, leading to
"JOIN qualification cannot refer to other relations" failures from
distribute_qual_to_rels. Subtler errors in the created plan seem possible,
too, if the extra qual would only affect join ordering constraints.
Per bug #9041 from David Leverton. Back-patch to 9.3.
New checks include input, month/day/time internal adjustments, addition,
subtraction, multiplication, and negation. Also adjust docs to
correctly specify interval size in bytes.
Report from Rok Kralj
Various places were supposing that errno could be expected to hold still
within an ereport() nest or similar contexts. This isn't true necessarily,
though in some cases it accidentally failed to fail depending on how the
compiler chanced to order the subexpressions. This class of thinko
explains recent reports of odd failures on clang-built versions, typically
missing or inappropriate HINT fields in messages.
Problem identified by Christian Kruse, who also submitted the patch this
commit is based on. (I fixed a few issues in his patch and found a couple
of additional places with the same disease.)
Back-patch as appropriate to all supported branches.
This doesn't work for prepared queries, but it's not too easy to get
the information in that case and there's some debate as to exactly
what the right thing to measure is, so just do this for now.
Andreas Karlsson, with slight doc changes by me.
We calculated the rounded-up size for the allocation, but then failed to
use the rounded-up value in the mmap() call. Oops.
Also, initialize allocsize, to silence warnings seen with some compilers,
as pointed out by Jeff Janes.
When skipping over some items in a posting tree, re-find the new location
by descending the tree from root, rather than walking the right links.
This can save a lot of I/O.
Heavily modified from Alexander Korotkov's fast scan patch.
If we're skipping past a certain TID, avoid decoding posting list segments
that only contain smaller TIDs.
Extracted from Alexander Korotkov's fast scan patch, heavily modified.
In a multi-key search, ie. something like "col @> 'foo' AND col @> 'bar'",
as soon as we find the next item that matches the first criteria, we don't
need to check the second criteria for TIDs smaller the first match. That
saves a lot of effort, especially if one of the terms is rare, while the
second occurs very frequently.
Based on ideas from Alexander Korotkov's fast scan patch.
This patch adds an option, huge_tlb_pages, which allows requesting the
shared memory segment to be allocated using huge pages, by using the
MAP_HUGETLB flag in mmap(). This can improve performance.
The default is 'try', which means that we will attempt using huge pages,
and fall back to non-huge pages if it doesn't work. Currently, only Linux
has MAP_HUGETLB. On other platforms, the default 'try' behaves the same as
'off'.
In the passing, don't try to round the mmap() size to a multiple of
pagesize. mmap() doesn't require that, and there's no particular reason for
PostgreSQL to do that either. When using MAP_HUGETLB, however, round the
request size up to nearest 2MB boundary. This is to work around a bug in
some Linux kernel versions, but also to avoid wasting memory, because the
kernel will round the size up anyway.
Many people were involved in writing this patch, including Christian Kruse,
Richard Poole, Abhijit Menon-Sen, reviewed by Peter Geoghegan, Andres Freund
and me.
json_build_array() and json_build_object allow for the construction of
arbitrarily complex json trees. json_object() turns a one or two
dimensional array, or two separate arrays, into a json_object of
name/value pairs, similarly to the hstore() function.
json_object_agg() aggregates its two arguments into a single json object
as name value pairs.
Catalog version bumped.
Andrew Dunstan, reviewed by Marko Tiikkaja.
Per the expanded comment-
As we're just trying to reset these to go to DEVNULL, there's not
much point in checking for failure from the close/dup2 calls here,
if they fail then presumably the file descriptors are closed and
any writes will go into the bitbucket anyway.
Pointed out by Tom.
It's worth distinguishing these cases from run-of-the-mill wrong-password
problems, since users have been known to waste lots of time pursuing the
wrong theory about what's failing. Now, our longstanding policy about how
to report authentication failures is that we don't really want to tell the
*client* such things, since that might be giving information to a bad guy.
But there's nothing wrong with reporting the details to the postmaster log,
and indeed the comments in this area of the code contemplate that
interesting details should be so reported. We just weren't handling these
particular interesting cases usefully.
To fix, add infrastructure allowing subroutines of ClientAuthentication()
to return a string to be added to the errdetail_log field of the main
authentication-failed error report. We might later want to use this to
report other subcases of authentication failure the same way, but for the
moment I just dealt with password cases.
Per discussion of a patch from Josh Drake, though this is not what
he proposed.
This makes it possible to store lwlocks as part of some other data
structure in the main shared memory segment, or in a dynamic shared
memory segment. There is still a main LWLock array and this patch does
not move anything out of it, but it provides necessary infrastructure
for doing that in the future.
This change is likely to increase the size of LWLockPadded on some
platforms, especially 32-bit platforms where it was previously only
16 bytes.
Patch by me. Review by Andres Freund and KaiGai Kohei.
Fix integer overflow issue noted by Magnus Hagander, as well as a bunch
of other infelicities in commit ee1e5662d8
and its unreasonably large number of followups.
Consistently check the dup2() call results throughout syslogger.c.
It's pretty unlikely that they'll error out, but if they do,
ereport(FATAL) instead of blissfully continuing on.
Spotted by the Coverity scanner.
This allows ending recovery as a consistent state has been reached. Without
this, there was no easy way to e.g restore an online backup, without
replaying any extra WAL after the backup ended.
MauMau and me.
The maxoff field is not used in the new, compressed page format. Let's
reset it when converting an old-format page to the new format. The code
won't care either way, but this makes it possible to use the field for
something else in the future.
When vacuuming a data leaf page, any compressed posting lists that are not
modified, are copied back to the buffer from a later location in the same
buffer rather than from a palloc'd copy. IOW, they are just moved
downwards in the same buffer. Because the source and destination addresses
can overlap, we must use memmove rather than memcpy.
Report and fix by Alexander Korotkov.
Add the ability to specify the objects to move by who those objects are
owned by (as relowner) and change ALL to mean ALL objects. This
makes the command always operate against a well-defined set of objects
and not have the objects-to-be-moved based on the role of the user
running the command.
Per discussion with Simon and Tom.
Since C99, it's been standard for printf and friends to accept a "z" size
modifier, meaning "whatever size size_t has". Up to now we've generally
dealt with printing size_t values by explicitly casting them to unsigned
long and using the "l" modifier; but this is really the wrong thing on
platforms where pointers are wider than longs (such as Win64). So let's
start using "z" instead. To ensure we can do that on all platforms, teach
src/port/snprintf.c to understand "z", and add a configure test to force
use of that implementation when the platform's version doesn't handle "z".
Having done that, modify a bunch of places that were using the
unsigned-long hack to use "z" instead. This patch doesn't pretend to have
gotten everyplace that could benefit, but it catches many of them. I made
an effort in particular to ensure that all uses of the same error message
text were updated together, so as not to increase the number of
translatable strings.
It's possible that this change will result in format-string warnings from
pre-C99 compilers. We might have to reconsider if there are any popular
compilers that will warn about this; but let's start by seeing what the
buildfarm thinks.
Andres Freund, with a little additional work by me
The Sparc machines in the buildfarm are crashing because of misaligned
access to posting lists stored in entry tuples.
I accidentally removed a critical SHORTALIGN() from ginFormTuple, as part
of the packed posting lists patch. Perhaps I thought it was unnecessary,
because the index_form_tuple() call above the SHORTALIGN already aligned
the size, missing the fact that the null-category byte makes it misaligned
again (I think the SHORTALIGN is indeed unnecessary if there's no null-
category byte, but let's just play it safe...)
Some cases were still reporting errors and aborting, instead of a NOTICE
that the object was being skipped. This makes it more difficult to
cleanly handle pg_dump --clean, so change that to instead skip missing
objects properly.
Per bug #7873 reported by Dave Rolsky; apparently this affects a large
number of users.
Authors: Pavel Stehule and Dean Rasheed. Some tweaks by Álvaro Herrera
GIN posting lists are now encoded using varbyte-encoding, which allows them
to fit in much smaller space than the straight ItemPointer array format used
before. The new encoding is used for both the lists stored in-line in entry
tree items, and in posting tree leaf pages.
To maintain backwards-compatibility and keep pg_upgrade working, the code
can still read old-style pages and tuples. Posting tree leaf pages in the
new format are flagged with GIN_COMPRESSED flag, to distinguish old and new
format pages. Likewise, entry tree tuples in the new format have a
GIN_ITUP_COMPRESSED flag set in a bit that was previously unused.
This patch bumps GIN_CURRENT_VERSION from 1 to 2. New indexes created with
version 9.4 will therefore have version number 2 in the metapage, while old
pg_upgraded indexes will have version 1. The code treats them the same, but
it might be come handy in the future, if we want to drop support for the
uncompressed format.
Alexander Korotkov and me. Reviewed by Tomas Vondra and Amit Langote.
A while back, 2c92edad48 allowed
type_func_name_keywords to be used in more places, including role
identifiers. Unfortunately, that commit missed out on cases where
name_list was used for lists-of-roles, eg: for DROP ROLE. This
resulted in the unfortunate situation that you could CREATE a role
with a type_func_name_keywords-allowed identifier, but not DROP it
(directly- ALTER could be used to rename it to something which
could be DROP'd).
This extends allowing type_func_name_keywords to places where role
lists can be used.
Back-patch to 9.0, as 2c92edad48 was.
All these constructs generate parse trees consisting of a Const and
a run-time type coercion (perhaps a FuncExpr or a CoerceViaIO). Modify
the raw parse output so that we end up with the original token's location
attached to the type coercion node while the Const has location -1;
before, it was the other way around. This makes no difference in terms
of what exprLocation() will say about the parse tree as a whole, so it
should not have any user-visible impact. The point of changing it is that
we do not want contrib/pg_stat_statements to treat these constructs as
replaceable constants. It will do the right thing if the Const has
location -1 rather than a valid location.
This is a pretty ugly hack, but then this code is ugly already; we should
someday replace this translation with special-purpose parse node(s) that
would allow ruleutils.c to reconstruct the original query text.
(See also commit 5d3fcc4c2e, which also
hacked location assignment rules for the benefit of pg_stat_statements.)
Back-patch to 9.2 where pg_stat_statements grew the ability to recognize
replaceable constants.
Kyotaro Horiguchi
Unlike our other array functions, this considers the total number of
elements across all dimensions, and returns 0 rather than NULL when the
array has no elements. But it seems that both of those behaviors are
almost universally disliked, so hopefully that's OK.
Marko Tiikkaja, reviewed by Dean Rasheed and Pavel Stehule
Commit a5bca4ef03 accidentally changed
the semantics when the "skipping missing configuration file" is
emitted, because it forced OK to true instead of leaving the value
untouched.
Spotted by Tom Lane.
Commit 138184adc5 plugged some but not
all of the leaks from commit 2a0c81a12c.
This tightens things up some more.
Amit Kapila, per an observation by Tom Lane
When there are consecutive spaces (or other non-format-code characters) in
the format, we should advance over exactly that many characters of input.
The previous coding mistakenly did a "skip whitespace" action between such
characters, possibly allowing more input to be skipped than the user
intended. We only need to skip whitespace just before an actual field.
This is really a bug fix, but given the minimal number of field complaints
and the risk of breaking applications coded to expect the old behavior,
let's not back-patch it.
Jeevan Chalke
Previously the presence of a nextval() prevented the
use of batch-mode COPY. This patch introduces a
special case just for nextval() functions. In future
we will introduce a general case solution for
labelling volatile functions as safe for use.
krb5 has been deprecated since 8.3, and the recommended way to do
Kerberos authentication is using the GSSAPI authentication method
(which is still fully supported).
libpq retains the ability to identify krb5 authentication, but only
gives an error message about it being unsupported. Since all authentication
is initiated from the backend, there is no need to keep it at all
in the backend.
Tablespaces have a few options which can be set on them to give PG hints
as to how the tablespace behaves (perhaps it's faster for sequential
scans, or better able to handle random access, etc). These options were
only available through the ALTER TABLESPACE command.
This adds the ability to set these options at CREATE TABLESPACE time,
removing the need to do both a CREATE TABLESPACE and ALTER TABLESPACE to
get the correct options set on the tablespace.
Vik Fearing, reviewed by Michael Paquier.
Historically, VACUUM has just reported its new_rel_tuples estimate
(the same thing it puts into pg_class.reltuples) to the stats collector.
That number counts both live and dead-but-not-yet-reclaimable tuples.
This behavior may once have been right, but modern versions of the
pgstats code track live and dead tuple counts separately, so putting
the total into n_live_tuples and zero into n_dead_tuples is surely
pretty bogus. Fix it to report live and dead tuple counts separately.
This doesn't really do much for situations where updating transactions
commit concurrently with a VACUUM scan (possibly causing double-counting or
omission of the tuples they add or delete); but it's clearly an improvement
over what we were doing before.
Hari Babu, reviewed by Amit Kapila
This adds a 'MOVE' sub-command to ALTER TABLESPACE which allows moving sets of
objects from one tablespace to another. This can be extremely handy and avoids
a lot of error-prone scripting. ALTER TABLESPACE ... MOVE will only move
objects the user owns, will notify the user if no objects were found, and can
be used to move ALL objects or specific types of objects (TABLES, INDEXES, or
MATERIALIZED VIEWS).
We've always allowed CREATE TABLE to create tables in the database's default
tablespace without checking for CREATE permissions on that tablespace.
Unfortunately, the original implementation of ALTER TABLE ... SET TABLESPACE
didn't pick up on that exception.
This changes ALTER TABLE ... SET TABLESPACE to allow the database's default
tablespace without checking for CREATE rights on that tablespace, just as
CREATE TABLE works today. Users could always do this through a series of
commands (CREATE TABLE ... AS SELECT * FROM ...; DROP TABLE ...; etc), so
let's fix the oversight in SET TABLESPACE's original implementation.
These changes should generally improve correctness/maintainability.
A nice side benefit is that several kilobytes move from initialized
data to text segment, allowing them to be shared across processes and
probably reducing copy-on-write overhead while forking a new backend.
Unfortunately this doesn't seem to help libpq in the same way (at least
not when it's compiled with -fpic on x86_64), but we can hope the linker
at least collects all nominally-const data together even if it's not
actually part of the text segment.
Also, make pg_encname_tbl[] static in encnames.c, since there seems
no very good reason for any other code to use it; per a suggestion
from Wim Lewis, who independently submitted a patch that was mostly
a subset of this one.
Oskari Saarenmaa, with some editorialization by me
Expand the messages when log_connections is enabled to include the
fact that SSL is used and the SSL cipher information.
Dr. Andreas Kunert, review by Marko Kreen
Commit 6f60fdd701 accidentally removed a
call to XLogWalRcvSendHSFeedback() after flushing received WAL to disk.
The consequence is that when walsender is busy streaming WAL, it doesn't
send HS feedback messages. One is sent if nothing is received from the
master for 100ms, but if there's a steady stream of WAL, it never happens.
Backpatch to 9.3.
Andres Freund and Amit Kapila
Coverity is complaining that the value returned by pg_strtok in
READ_LOCATION_FIELD and READ_BITMAPSET_FIELD macros is not used. In commit
39bfc94c86, we did this to the other macros
to placate compilers that complained when the variable was completely
unused, this extends that to the last remaining macros.
Previously, we did this just once per checkpoint, but that could make
Hot Standby take a long time to initialize. To avoid busying an
otherwise-idle system, we don't do this if no WAL has been written
since we did it last.
Andres Freund
In ordinary operation, VACUUM must be careful to take a cleanup lock on
each leaf page of a btree index; this ensures that no indexscans could
still be "in flight" to heap tuples due to be deleted. (Because of
possible index-tuple motion due to concurrent page splits, it's not enough
to lock only the pages we're deleting index tuples from.) In Hot Standby,
the WAL replay process must likewise lock every leaf page. There were
several bugs in the code for that:
* The replay scan might come across unused, all-zero pages in the index.
While btree_xlog_vacuum itself did the right thing (ie, nothing) with
such pages, xlogutils.c supposed that such pages must be corrupt and
would throw an error. This accounts for various reports of replication
failures with "PANIC: WAL contains references to invalid pages". To
fix, add a ReadBufferMode value that instructs XLogReadBufferExtended
not to complain when we're doing this.
* btree_xlog_vacuum performed the extra locking if standbyState ==
STANDBY_SNAPSHOT_READY, but that's not the correct test: we won't open up
for hot standby queries until the database has reached consistency, and
we don't want to do the extra locking till then either, for fear of reading
corrupted pages (which bufmgr.c would complain about). Fix by exporting a
new function from xlog.c that will report whether we're actually in hot
standby replay mode.
* To ensure full coverage of the index in the replay scan, btvacuumscan
would emit a dummy WAL record for the last page of the index, if no
vacuuming work had been done on that page. However, if the last page
of the index is all-zero, that would result in corruption of said page,
since the functions called on it weren't prepared to handle that case.
There's no need to lock any such pages, so change the logic to target
the last normal leaf page instead.
The first two of these bugs were diagnosed by Andres Freund, the other one
by me. Fixes based on ideas from Heikki Linnakangas and myself.
This has been wrong since Hot Standby was introduced, so back-patch to 9.0.
This code provides infrastructure for user backends to communicate
relatively easily with background workers. The message queue is
structured as a ring buffer and allows messages of arbitary length
to be sent and received.
Patch by me. Review by KaiGai Kohei and Andres Freund.
This interface is intended to make it simple to divide a dynamic shared
memory segment into different regions with distinct purposes. It
therefore serves much the same purpose that ShmemIndex accomplishes for
the main shared memory segment, but it is intended to be more
lightweight.
Patch by me. Review by Andres Freund.
Move FreeConfigVariables() later to make sure ErrorConfFile is valid
when we use it, and get rid of an unnecessary string copy operation.
Amit Kapila, kibitzed by me.
On second thought, commit 0c051c9008 was
over-hasty: rather than allowing this case, we ought to reject it for now.
That leaves the field clear for a future feature that allows the target
table to be re-specified in the FROM (or USING) clause, which will enable
left-joining the target table to something else. We can then also allow
LATERAL references to such an explicitly re-specified target table.
But allowing them right now will create ambiguities or worse for such a
feature, and it isn't something we documented 9.3 as supporting.
While at it, add a convenience subroutine to avoid having several copies
of the ereport for disalllowed-LATERAL-reference cases.
Per reports from Andres Freund and Luke Campbell, a server failure during
set_pglocale_pgservice results in a segfault rather than a useful error
message, because the infrastructure needed to use ereport hasn't been
initialized; specifically, MemoryContextInit hasn't been called.
One known cause of this is starting the server in a directory it
doesn't have permission to read.
We could try to prevent set_pglocale_pgservice from using anything that
depends on palloc or elog, but that would be messy, and the odds of future
breakage seem high. Moreover there are other things being called in main.c
that look likely to use palloc or elog too --- perhaps those things
shouldn't be there, but they are there today. The best solution seems to
be to move the call of MemoryContextInit to very early in the backend's
real main() function. I've verified that an elog or ereport occurring
immediately after that is now capable of sending something useful to
stderr.
I also added code to elog.c to print something intelligible rather than
just crashing if MemoryContextInit hasn't created the ErrorContext.
This could happen if MemoryContextInit itself fails (due to malloc
failure), and provides some future-proofing against someone trying to
sneak in new code even earlier in server startup.
Back-patch to all supported branches. Since we've only heard reports of
this type of failure recently, it may be that some recent change has made
it more likely to see a crash of this kind; but it sure looks like it's
broken all the way back.
The standard typanalyze functions skip over values whose detoasted size
exceeds WIDTH_THRESHOLD (1024 bytes), so as to limit memory bloat during
ANALYZE. However, we (I think I, actually :-() failed to consider the
possibility that *every* non-null value in a column is too wide. While
compute_minimal_stats() seems to behave reasonably anyway in such a case,
compute_scalar_stats() just fell through and generated no pg_statistic
entry at all. That's unnecessarily pessimistic: we can still produce
valid stanullfrac and stawidth values in such cases, since we do include
too-wide values in the average-width calculation. Furthermore, since the
general assumption in this code is that too-wide values are probably all
distinct from each other, it seems reasonable to set stadistinct to -1
("all distinct").
Per complaint from Kadri Raudsepp. This has been like this since roughly
neolithic times, so back-patch to all supported branches.
The new MultiXact freezing routines introduced by commit 8e9a16ab8f
neglected to consider tuples that came from a pg_upgrade'd database; a
vacuum run that tried to freeze such tuples would die with an error such
as
ERROR: MultiXactId 11415437 does no longer exist -- apparent wraparound
To fix, ensure that GetMultiXactIdMembers is allowed to return empty
multis when the infomask bits are right, as is done in other callsites.
Per trouble report from F-Secure.
In passing, fix a copy&paste bug reported by Andrey Karpov from VIVA64
from their PVS-Studio static checked, that instead of setting relminmxid
to Invalid, we were setting relfrozenxid twice. Not an important
mistake because that code branch is about relations for which we don't
use the frozenxid/minmxid values at all in the first place, but seems to
warrants a fix nonetheless.
Buildfarm member dunlin has been crashing since commit 8b49a60, but other
machines seem fine with that code. It turns out that removing the local
variables in ordered_set_startup() that are copies of fields in "qstate"
dodges the problem. This might cost a few cycles on register-rich
machines, but it's probably a wash on others, and in any case this code
isn't performance-critical. Thanks to Jeremy Drake for off-list
investigation.
Makes the replay loop slightly more readable, by separating the concerns of
whether to stop and whether to delay, and how to extract the timestamp from
a record.
This has the user-visible change that the timestamp of the last applied
record is now updated after actually applying it. Before, it was updated
just before applying it. That meant that pg_last_xact_replay_timestamp()
could return the timestamp of a commit record that is in process of being
replayed, but not yet applied. Normally the difference is small, but if
min_recovery_apply_delay is set, there could be a significant delay between
reading a record and applying it.
Another behavioral change is that if you recover to a restore point, we stop
after the restore point record, not before it. It makes no difference as far
as running queries on the server is concerned, as applying a restore point
record changes nothing, but if examine the timeline history you will see
that the new timeline branched off just after the restore point record, not
before it. One practical consequence is that if you do PITR to the new
timeline, and set recovery target to the same named restore point again, it
will find and stop recovery at the same restore point. Conceptually, I think
it makes more sense to consider the restore point as part of the new
timeline's history than not.
In principle, setting the last-replayed timestamp before actually applying
the record was a bug all along, but it doesn't seem worth the risk to
backpatch, since min_recovery_apply_delay was only added in 9.4.
Minor improvement to commit daa7527afc2274432094ebe7ceb03aa41f916607:
s_lock.h no longer has any need to mention PGSemaphoreData, so we can
rip out the #include that supplies that. In a non-HAVE_SPINLOCKS
build, this doesn't really buy much since we still need the #include
in spin.h --- but everywhere else, this reduces #include footprint by
some trifle, and helps keep the different locking facilities separate.
In commit c1352052ef, I implemented an
optimization that assumed that a function's argument expressions would
either always return a set (ie multiple rows), or always not. This is
wrong however: we allow CASE expressions in which some arms return a set
of some type and others just return a scalar of that type. There may be
other examples as well. To fix, replace the run-time test of whether an
argument returned a set with a static precheck (expression_returns_set).
This adds a little bit of query startup overhead, but it seems barely
measurable.
Per bug #8228 from David Johnston. This has been broken since 8.0,
so patch all supported branches.
Instead of allocating a semaphore from the operating system for every
spinlock, allocate a fixed number of semaphores (by default, 1024)
from the operating system and multiplex all the spinlocks that get
created onto them. This could self-deadlock if a process attempted
to acquire more than one spinlock at a time, but since processes
aren't supposed to execute anything other than short stretches of
straight-line code while holding a spinlock, that shouldn't happen.
One motivation for this change is that, with the introduction of
dynamic shared memory, it may be desirable to create spinlocks that
last for less than the lifetime of the server. Without this change,
attempting to use such facilities under --disable-spinlocks would
quickly exhaust any supply of available semaphores. Quite apart
from that, it's desirable to contain the quantity of semaphores
needed to run the server simply on convenience grounds, since using
too many may make it harder to get PostgreSQL running on a new
platform, which is mostly the point of --disable-spinlocks in the
first place.
Patch by me; review by Tom Lane.
If pause_at_recovery_target is set, recovery pauses *before* applying the
target record, even if recovery_target_inclusive is set. If you then
continue with pg_xlog_replay_resume(), it will apply the target record
before ending recovery. In other words, if you log in while it's paused
and verify that the database looks OK, ending recovery changes its state
again, possibly destroying data that you were tring to salvage with PITR.
Backpatch to 9.1, this has been broken since pause_at_recovery_target was
added.
The docs say that only one of recovery_target_xid, recovery_target_time, or
recovery_target_name can be specified. But the code actually did something
different, so that a name overrode time, and xid overrode both time and name.
Now the target specified last takes effect, whether it's an xid, time or
name.
With this patch, we still accept multiple recovery_target settings, even
though docs say that only one can be specified. It's a general property of
the recovery.conf file parser that you if you specify the same option twice,
the last one takes effect, like with postgresql.conf.
In the transition functions, we don't really need to recheck this after the
first call. I had been feeling paranoid about possibly getting a non-null
argument value in some other context; but it's probably game over anyway
if we have a non-null "internal" value that's not what we are expecting.
In the final functions, the general convention in pre-existing final
functions seems to be that an Assert() is good enough, so do it like that
here too.
This seems to save a few tenths of a percent of overall query runtime,
which isn't much, but still it's just overhead if there's not a plausible
case where the checks would fire.
Keep a pre-initialized FunctionCallInfoData in AggStatePerAggData, and
re-use that at each row instead of doing InitFunctionCallInfoData each
time. This saves only half a dozen assignments and maybe some stack
manipulation, and yet that seems to be good for a percent or two of the
overall query run time for simple aggregates such as count(*). The cost
is that the FunctionCallInfoData (which is about a kilobyte, on 64-bit
machines) stays allocated for the duration of the query instead of being
short-lived stack data. But we're already paying an equivalent space cost
for each regular FuncExpr or OpExpr node, so I don't feel bad about paying
it for aggregate functions. The code seems a little cleaner this way too,
since the number of things passed to advance_transition_function decreases.
When starting WAL replay from an online checkpoint, the last replayed WAL
record variable was initialized using the checkpoint record's location, even
though the records between the REDO location and the checkpoint record had
not been replayed yet. That was noted as "slightly confusing" but harmless
in the comment, but in some cases, it fooled CheckRecoveryConsistency to
incorrectly conclude that we had already reached a consistent state
immediately at the beginning of WAL replay. That caused the system to accept
read-only connections in hot standby mode too early, and also PANICs with
message "WAL contains references to invalid pages".
Fix by initializing the variables to the REDO location instead.
In 9.2 and above, change CheckRecoveryConsistency() to use
lastReplayedEndRecPtr variable when checking if backup end location has
been reached. It was inconsistently using EndRecPtr for that check, but
lastReplayedEndRecPtr when checking min recovery point. It made no
difference before this patch, because in all the places where
CheckRecoveryConsistency was called the two variables were the same, but
it was always an accident waiting to happen, and would have been wrong
after this patch anyway.
Report and analysis by Tomonari Katsumata, bug #8686. Backpatch to 9.0,
where hot standby was introduced.
I failed to think much about UPDATE/DELETE when implementing LATERAL :-(.
The implemented behavior ended up being that subqueries in the FROM or
USING clause (respectively) could access the update/delete target table as
though it were a lateral reference; which seems fine if they said LATERAL,
but certainly ought to draw an error if they didn't. Fix it so you get a
suitable error when you omit LATERAL. Per report from Emre Hasegeli.
And the same for do_pg_stop_backup. The code in do_pg_* is not allowed
to access the catalogs. For manual base backups, the permissions
check can be handled in the calling function, and for streaming
base backups only users with the required permissions can get past
the authentication step in the first place.
Reported by Antonin Houska, diagnosed by Andres Freund
If a tablespace was crated inside PGDATA it was backed up both as part
of the PGDATA backup and as the backup of the tablespace. Avoid this
by skipping any directory inside PGDATA that contains one of the active
tablespaces.
Dimitri Fontaine and Magnus Hagander
The initial commit of ordered-set aggregates just did all the setup work
afresh each time the aggregate function is started up. But in a GROUP BY
query, the catalog lookups need not be repeated for each group, since the
column datatypes and sort information won't change. When there are many
small groups, this makes for a useful, though not huge, performance
improvement. Per suggestion from Andrew Gierth.
Profiling of these cases suggests that it might be profitable to avoid
duplicate lookups within tuplesort startup as well; but changing the
tuplesort APIs would have much broader impact, so I left that for
another day.
The result is an int less than, equal to, or greater than zero, in the
style of memcmp (and, in fact, exactly the output of memcmp in some cases).
This comment previously said -1, 1, or 0, which was an overspecification,
as noted by Emre Hasegeli. All of the existing callers appear to be fine
with the actual behavior, so just fix the comment.
In passing, improve infelicitous formatting of some call sites.
The PGSTAT_NUM_TABENTRIES macro should have been updated when new fields
were added to struct PgStat_MsgTabstat in commit 644828908, but it wasn't.
Fix that.
Also, add a static assertion that we didn't overrun the intended size limit
on stats messages. This will not necessarily catch every mistake in
computing the maximum array size for stats messages, but it will catch ones
that have practical consequences. (The assertion in fact doesn't complain
about the aforementioned error in PGSTAT_NUM_TABENTRIES, because that was
not big enough to cause the array length to increase.)
No back-patch, as there's no actual bug in existing releases; this is just
in the nature of future-proofing.
Mark Dilger and Tom Lane
Original users of slru.c were all producing 4-digit filenames, so that
was all that that code was prepared to handle. Changes to multixact.c
in the course of commit 0ac5ad5134 made pg_multixact/members create
5-digit filenames once a certain threshold was reached, which
SlruScanDirectory wasn't prepared to deal with; in particular,
5-digit-name files were not removed during truncation. Change that
routine to make it aware of those files, and have it process them just
like any others.
Right now, some pg_multixact/members directories will contain a mixture
of 4-char and 5-char filenames. A future commit is expected fix things
so that each slru.c user declares the correct maximum width for the
files it produces, to avoid such unsightly mixtures.
Noticed while investigating bug #8673 reported by Serge Negodyuck.
In the 9.2 code for extending multixact/members, the logic was very
simple because the number of entries in a members page was a proper
divisor of 2^32, and thus at 2^32 wraparound the logic for page switch
was identical than at any other page boundary. In commit 0ac5ad5134 I
failed to realize this and introduced code that was not able to go over
the 2^32 boundary. Fix that by ensuring that when we reach the last
page of the last segment we correctly zero the initial page of the
initial segment, using correct uint32-wraparound-safe arithmetic.
Noticed while investigating bug #8673 reported by Serge Negodyuck, as
diagnosed by Andres Freund.
In pg_multixact/members, relying on modulo-2^32 arithmetic for
wraparound handling doesn't work all that well. Because we don't
explicitely track wraparound of the allocation counter for members, it
is possible that the "live" area exceeds 2^31 entries; trying to remove
SLRU segments that are "old" according to the original logic might lead
to removal of segments still in use. To fix, have the truncation
routine use a tailored SlruScanDirectory callback that keeps track of
the live area in actual use; that way, when the live range exceeds 2^31
entries, the oldest segments still live will not get removed untimely.
This new SlruScanDir callback needs to take care not to remove segments
that are "in the future": if new SLRU segments appear while the
truncation is ongoing, make sure we don't remove them. This requires
examination of shared memory state to recheck for false positives, but
testing suggests that this doesn't cause a problem. The original coding
didn't suffer from this pitfall because segments created when truncation
is running are never considered to be removable.
Per Andres Freund's investigation of bug #8673 reported by Serge
Negodyuck.
We haven't wanted to do this in the past on the grounds that in rare
cases the original xmin value will be needed for forensic purposes, but
commit 37484ad2aa removes that objection,
so now we can.
Per extensive discussion, among many people, on pgsql-hackers.
CREATE EVENT TRIGGER forgot to mark the event trigger as a member of its
extension, and pg_dump didn't pay any attention anyway when deciding
whether to dump the event trigger. Per report from Moshe Jacobson.
Given the obvious lack of testing here, it's rather astonishing that
ALTER EXTENSION ADD/DROP EVENT TRIGGER work, but they seem to.
We don't need make_restrictinfo_from_bitmapqual() anymore at all.
generate_bitmap_or_paths() doesn't need to be exported, and we can
drop its rather klugy restriction_only flag.
It's possible to extract a restriction OR clause from a join clause that
has the form of an OR-of-ANDs, if each sub-AND includes a clause that
mentions only one specific relation. While PG has been aware of that idea
for many years, the code previously only did it if it could extract an
indexable OR clause. On reflection, though, that seems a silly limitation:
adding a restriction clause can be a win by reducing the number of rows
that have to be filtered at the join step, even if we have to test the
clause as a plain filter clause during the scan. This should be especially
useful for foreign tables, where the change can cut the number of rows that
have to be retrieved from the foreign server; but testing shows it can win
even on local tables. Per a suggestion from Robert Haas.
As a heuristic, I made the code accept an extracted restriction clause
if its estimated selectivity is less than 0.9, which will probably result
in accepting extracted clauses just about always. We might need to tweak
that later based on experience.
Since the code no longer has even a weak connection to Path creation,
remove orindxpath.c and create a new file optimizer/util/orclauses.c.
There's some additional janitorial cleanup of now-dead code that needs
to happen, but it seems like that's a fit subject for a separate commit.
Instead of looking for characters that aren't valid in JSON numbers, we
simply pass the output string through the JSON number parser, and if it
fails the string is quoted. This means among other things that money and
domains over money will be quoted correctly and generate valid JSON.
Fixes bug #8676 reported by Anderson Cristian da Silva.
Backpatched to 9.2 where JSON generation was introduced.
The bug would only show up if the C sockaddr structure contained
zero in the first byte for a valid address; otherwise it would
fail to fail, which is probably why it went unnoticed for so long.
Patch submitted by Joel Jacobson after seeing an article by Andrey
Karpov in which he reports finding this through static code
analysis using PVS-Studio. While I was at it I moved a definition
of a local variable referenced in the buggy code to a more local
context.
Backpatch to all supported branches.
Most other range operations seem to work all right on domains,
but this one not so much, at least not since commit 918eee0c.
Per bug #8684 from Brett Neumeier.
Commit 37484ad2aa invalidated a good
chunk of documentation, so patch it up to reflect the new state of
play. Along the way, patch remaining documentation references to
FrozenXID to say instead FrozenTransactionId, so that they match the
way we actually spell it in the code.
Overly compact coding in makeOrderedSetArgs() led to a platform dependency:
if the compiler chose to execute the subexpressions in the wrong order,
list_length() might get applied to an already-modified List, giving a
value we didn't want. Per buildfarm.
This patch introduces generic support for ordered-set and hypothetical-set
aggregate functions, as well as implementations of the instances defined in
SQL:2008 (percentile_cont(), percentile_disc(), rank(), dense_rank(),
percent_rank(), cume_dist()). We also added mode() though it is not in the
spec, as well as versions of percentile_cont() and percentile_disc() that
can compute multiple percentile values in one pass over the data.
Unlike the original submission, this patch puts full control of the sorting
process in the hands of the aggregate's support functions. To allow the
support functions to find out how they're supposed to sort, a new API
function AggGetAggref() is added to nodeAgg.c. This allows retrieval of
the aggregate call's Aggref node, which may have other uses beyond the
immediate need. There is also support for ordered-set aggregates to
install cleanup callback functions, so that they can be sure that
infrastructure such as tuplesort objects gets cleaned up.
In passing, make some fixes in the recently-added support for variadic
aggregates, and make some editorial adjustments in the recent FILTER
additions for aggregates. Also, simplify use of IsBinaryCoercible() by
allowing it to succeed whenever the target type is ANY or ANYELEMENT.
It was inconsistent that it dealt with other polymorphic target types
but not these.
Atri Sharma and Andrew Gierth; reviewed by Pavel Stehule and Vik Fearing,
and rather heavily editorialized upon by Tom Lane
Instead of changing the tuple xmin to FrozenTransactionId, the combination
of HEAP_XMIN_COMMITTED and HEAP_XMIN_INVALID, which were previously never
set together, is now defined as HEAP_XMIN_FROZEN. A variety of previous
proposals to freeze tuples opportunistically before vacuum_freeze_min_age
is reached have foundered on the objection that replacing xmin by
FrozenTransactionId might hinder debugging efforts when things in this
area go awry; this patch is intended to solve that problem by keeping
the XID around (but largely ignoring the value to which it is set).
Third-party code that checks for HEAP_XMIN_INVALID on tuples where
HEAP_XMIN_COMMITTED might be set will be broken by this change. To fix,
use the new accessor macros in htup_details.h rather than consulting the
bits directly. HeapTupleHeaderGetXmin has been modified to return
FrozenTransactionId when the infomask bits indicate that the tuple is
frozen; use HeapTupleHeaderGetRawXmin when you already know that the
tuple isn't marked commited or frozen, or want the raw value anyway.
We currently do this in routines that display the xmin for user consumption,
in tqual.c where it's known to be safe and important for the avoidance of
extra cycles, and in the function-caching code for various procedural
languages, which shouldn't invalidate the cache just because the tuple
gets frozen.
Robert Haas and Andres Freund
We can allocate the initial relations-to-drop array when first needed,
instead of at function entry; this avoids allocating it when the
function is not going to do anything, which is most of the time.
Backpatch to 9.3, where this behavior was introduced by commit
279628a0a7.
There's more that could be done here, such as possible reworking of the
code to avoid having to palloc anything, but that doesn't sound as
backpatchable as this relatively minor change.
Per complaint from Noah Misch in
20131031145234.GA621493@tornado.leadboat.com
Updating or locking a row that was already locked by the same
transaction under the same Xid caused a MultiXact to be created; but
this is unnecessary, because there's no usefulness in being able to
differentiate two locks by the same transaction. In particular, if a
transaction executed SELECT FOR UPDATE followed by an UPDATE that didn't
modify columns of the key, we would dutifully represent the resulting
combination as a multixact -- even though a single key-update is
sufficient.
Optimize the case so that only the strongest of both locks/updates is
represented in Xmax. This can save some Xmax's from becoming
MultiXacts, which can be a significant optimization.
This missed optimization opportunity was spotted by Andres Freund while
investigating a bug reported by Oliver Seemann in message
CANCipfpfzoYnOz5jj=UZ70_R=CwDHv36dqWSpwsi27vpm1z5sA@mail.gmail.com
and also directly as a performance regression reported by Dong Ye in
message
d54b8387.000012d8.00000010@YED-DEVD1.vmware.com
Reportedly, this patch fixes the performance regression.
Since the missing optimization was reported as a significant performance
regression from 9.2, backpatch to 9.3.
Andres Freund, tweaked by Álvaro Herrera
Just as backends must clean up their shared memory state (releasing
lwlocks, buffer pins, etc.) before exiting, they must also perform
any similar cleanups related to dynamic shared memory segments they
have mapped before unmapping those segments. So add a mechanism to
ensure that.
Existing on_shmem_exit hooks include both "user level" cleanup such
as transaction abort and removal of leftover temporary relations and
also "low level" cleanup that forcibly released leftover shared
memory resources. On-detach callbacks should run after the first
group but before the second group, so create a new before_shmem_exit
function for registering the early callbacks and keep on_shmem_exit
for the regular callbacks. (An earlier draft of this patch added an
additional argument to on_shmem_exit, but that had a much larger
footprint and probably a substantially higher risk of breaking third
party code for no real gain.)
Patch by me, reviewed by KaiGai Kohei and Andres Freund.
Previously, lookups of non-existent user names could return "Success";
it will now return "User does not exist" by resetting errno. This also
centralizes the user name lookup code in libpgport.
Report and analysis by Nicolas Marchildon; patch by me
If a tuple was locked by transaction A, and transaction B updated it,
the new version of the tuple created by B would be locked by A, yet
visible only to B; due to an oversight in HeapTupleSatisfiesUpdate, the
lock held by A wouldn't get checked if transaction B later deleted (or
key-updated) the new version of the tuple. This might cause referential
integrity checks to give false positives (that is, allow deletes that
should have been rejected).
This is an easy oversight to have made, because prior to improved tuple
locks in commit 0ac5ad5134 it wasn't possible to have tuples created by
our own transaction that were also locked by remote transactions, and so
locks weren't even considered in that code path.
It is recommended that foreign keys be rechecked manually in bulk after
installing this update, in case some referenced rows are missing with
some referencing row remaining.
Per bug reported by Daniel Wood in
CAPweHKe5QQ1747X2c0tA=5zf4YnS2xcvGf13Opd-1Mq24rF1cQ@mail.gmail.com
Tuple freezing was broken in connection to MultiXactIds; commit
8e53ae025d tried to fix it, but didn't go far enough. As noted by
Noah Misch, freezing a tuple whose Xmax is a multi containing an aborted
update might cause locks in the multi to go ignored by later
transactions. This is because the code depended on a multixact above
their cutoff point not having any lock-only member older than the cutoff
point for Xids, which is easily defeated in READ COMMITTED transactions.
The fix for this involves creating a new MultiXactId when necessary.
But this cannot be done during WAL replay, and moreover multixact
examination requires using CLOG access routines which are not supposed
to be used during WAL replay either; so tuple freezing cannot be done
with the old freeze WAL record. Therefore, separate the freezing
computation from its execution, and change the WAL record to carry all
necessary information. At WAL replay time, it's easy to re-execute
freezing because we don't need to re-compute the new infomask/Xmax
values but just take them from the WAL record.
While at it, restructure the coding to ensure all page changes occur in
a single critical section without much room for failures. The previous
coding wasn't using a critical section, without any explanation as to
why this was acceptable.
In replication scenarios using the 9.3 branch, standby servers must be
upgraded before their master, so that they are prepared to deal with the
new WAL record once the master is upgraded; failure to do so will cause
WAL replay to die with a PANIC message. Later upgrade of the standby
will allow the process to continue where it left off, so there's no
disruption of the data in the standby in any case. Standbys know how to
deal with the old WAL record, so it's okay to keep the master running
the old code for a while.
In master, the old freeze WAL record is gone, for cleanliness' sake;
there's no compatibility concern there.
Backpatch to 9.3, where the original bug was introduced and where the
previous fix was backpatched.
Álvaro Herrera and Andres Freund
This fixes a problem noted as a followup to bug #8648: if a query has a
semantically-empty target list, e.g. SELECT * FROM zero_column_table,
ruleutils.c will dump it as a syntactically-empty target list, which was
not allowed. There doesn't seem to be any reliable way to fix this by
hacking ruleutils (note in particular that the originally zero-column table
might since have had columns added to it); and even if we had such a fix,
it would do nothing for existing dump files that might contain bad syntax.
The best bet seems to be to relax the syntactic restriction.
Also, add parse-analysis errors for SELECT DISTINCT with no columns (after
*-expansion) and RETURNING with no columns. These cases previously
produced unexpected behavior because the parsed Query looked like it had
no DISTINCT or RETURNING clause, respectively. If anyone ever offers
a plausible use-case for this, we could work a bit harder on making the
situation distinguishable.
Arguably this is a bug fix that should be back-patched, but I'm worried
that there may be client apps or PLs that expect "SELECT ;" to throw a
syntax error. The issue doesn't seem important enough to risk changing
behavior in minor releases.
Fix an oversight in commit b3aaf9081a1a95c245fd605dcf02c91b3a5c3a29: we do
indeed need to process the planner's append_rel_list when copying RTE
subqueries, because if any of them were flattenable UNION ALL subqueries,
the append_rel_list shows which subquery RTEs were pulled up out of which
other ones. Without this, UNION ALL subqueries aren't correctly inserted
into the update plans for inheritance child tables after the first one,
typically resulting in no update happening for those child table(s).
Per report from Victor Yegorov.
Experimentation with this case also exposed a fault in commit
a7b965382cf0cb30aeacb112572718045e6d4be7: if an inherited UPDATE/DELETE
was proven totally dummy by constraint exclusion, we might arrive at
add_rtes_to_flat_rtable with root->simple_rel_array being NULL. This
should be interpreted as not having any RelOptInfos. I chose to code
the guard as a check against simple_rel_array_size, so as to also
provide some protection against indexing off the end of the array.
Back-patch to 9.2 where the faulty code was added.
The original performs too poorly; in some scenarios it shows way too
high while profiling. Try to make it a bit smarter to avoid excessive
cosst. In particular, make it have a maximum size, and have entries be
sorted in LRU order; once the max size is reached, evict the oldest
entry to avoid it from growing too large.
Per complaint from Andres Freund in connection with new tuple freezing
code.
This prevents a possible longjmp out of the signal handler if a timeout
or SIGINT occurs while something within the handler has transiently set
ImmediateInterruptOK. For safety we must hold off the timeout or cancel
error until we're back in mainline, or at least till we reach the end of
the signal handler when ImmediateInterruptOK was true at entry. This
syncs these functions with the logic now present in handle_sig_alarm.
AFAICT there is no live bug here in 9.0 and up, because I don't think we
currently can wait for any heavyweight lock inside these functions, and
there is no other code (except read-from-client) that will turn on
ImmediateInterruptOK. However, that was not true pre-9.0: in older
branches ProcessIncomingNotify might block trying to lock pg_listener, and
then a SIGINT could lead to undesirable control flow. It might be all
right anyway given the relatively narrow code ranges in which NOTIFY
interrupts are enabled, but for safety's sake I'm back-patching this.
Serious oversight in commit 16e1b7a1b7f7ffd8a18713e83c8cd72c9ce48e07:
we should not allow an interrupt to take control away from mainline code
except when ImmediateInterruptOK is set. Just to be safe, let's adopt
the same save-clear-restore dance that's been used for many years in
HandleCatchupInterrupt and HandleNotifyInterrupt, so that nothing bad
happens if a timeout handler invokes code that tests or even manipulates
ImmediateInterruptOK.
Per report of "stuck spinlock" failures from Christophe Pettus, though
many other symptoms are possible. Diagnosis by Andres Freund.
WAL records of hint bit updates is useful to tools that want to examine
which pages have been modified. In particular, this is required to make
the pg_rewind tool safe (without checksums).
This can also be used to test how much extra WAL-logging would occur if
you enabled checksums, without actually enabling them (which you can't
currently do without re-initdb'ing).
Sawada Masahiko, docs by Samrat Revagade. Reviewed by Dilip Kumar, with
further changes by me.
The operation that removes the remaining dead tuples from the page must
be WAL-logged before the setting of the VM bit. Otherwise, if you replay
the WAL to between those two records, you end up with the VM bit set, but
the dead tuples are still there.
Backpatch to 9.3, where this bug was introduced.
Set min_recovery_apply_delay to force a delay in recovery apply for commit and
restore point WAL records. Other records are replayed immediately. Delay is
measured between WAL record time and local standby time.
Robert Haas, Fabrízio de Royes Mello and Simon Riggs
Detailed review by Mitsumasa Kondo
There's no real point in not doing this. It doesn't cost anything
in performance or space. So let's go wild.
Andres Freund, with substantial editing as to style by me.
When this reloption is set and wal_level=logical is configured,
we'll record the CIDs stamped by inserts, updates, and deletes to
the table just as we would for an actual catalog table. This will
allow logical decoding to use historical MVCC snapshots to access
such tables just as they access ordinary catalog tables.
Replication solutions built around the logical decoding machinery
will likely need to set this operation for their configuration
tables; it might also be needed by extensions which perform table
access in their output functions.
Andres Freund, reviewed by myself and others.
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
An expression such as WHERE (... x IN (SELECT ...) ...) IN (SELECT ...)
could produce an invalid plan that results in a crash at execution time,
if the planner attempts to flatten the outer IN into a semi-join.
This happens because convert_testexpr() was not expecting any nested
SubLinks and would wrongly replace any PARAM_SUBLINK Params belonging
to the inner SubLink. (I think the comment denying that this case could
happen was wrong when written; it's certainly been wrong for quite a long
time, since very early versions of the semijoin flattening logic.)
Per report from Teodor Sigaev. Back-patch to all supported branches.
SQL-standard TABLE() is a subset of UNNEST(); they deal with arrays and
other collection types. This feature, however, deals with set-returning
functions. Use a different syntax for this feature to keep open the
possibility of implementing the standard TABLE().
This sets up ECDH key exchange, when compiling against OpenSSL that
supports EC. Then the ECDHE-RSA and ECDHE-ECDSA cipher suites can be
used for SSL connections. The latter one means that EC keys are now
usable.
The reason for EC key exchange is that it's faster than DHE and it
allows to go to higher security levels where RSA will be horribly slow.
There is also new GUC option ssl_ecdh_curve that specifies the curve
name used for ECDH. It defaults to "prime256v1", which is the most
common curve in use in HTTPS.
From: Marko Kreen <markokr@gmail.com>
Reviewed-by: Adrian Klaver <adrian.klaver@gmail.com>
By default, OpenSSL (and SSL/TLS in general) lets the client cipher
order take priority. This is OK for browsers where the ciphers were
tuned, but few PostgreSQL client libraries make the cipher order
configurable. So it makes sense to have the cipher order in
postgresql.conf take priority over client defaults.
This patch adds the setting "ssl_prefer_server_ciphers" that can be
turned on so that server cipher order is preferred. Per discussion,
this now defaults to on.
From: Marko Kreen <markokr@gmail.com>
Reviewed-by: Adrian Klaver <adrian.klaver@gmail.com>
In 247c76a989, I added some code to do fine-grained checking of
MultiXact status of locking/updating transactions when traversing an
update chain. There was a thinko in that patch which would have the
traversing abort, that is return HeapTupleUpdated, when the other
transaction is a committed lock-only. In this case we should ignore it
and return success instead. Of course, in the case where there is a
committed update, HeapTupleUpdated is the correct return value.
A user-visible symptom of this bug is that in REPEATABLE READ and
SERIALIZABLE transaction isolation modes spurious serializability errors
can occur:
ERROR: could not serialize access due to concurrent update
In order for this to happen, there needs to be a tuple that's key-share-
locked and also updated, and the update must abort; a subsequent
transaction trying to acquire a new lock on that tuple would abort with
the above error. The reason is that the initial FOR KEY SHARE is seen
as committed by the new locking transaction, which triggers this bug.
(If the UPDATE commits, then the serialization error is correctly
reported.)
When running a query in READ COMMITTED mode, what happens is that the
locking is aborted by the HeapTupleUpdated return value, then
EvalPlanQual fetches the newest version of the tuple, which is then the
only version that gets locked. (The second time the tuple is checked
there is no misbehavior on the committed lock-only, because it's not
checked by the code that traverses update chains; so no bug.) Only the
newest version of the tuple is locked, not older ones, but this is
harmless.
The isolation test added by this commit illustrates the desired
behavior, including the proper serialization errors that get thrown.
Backpatch to 9.3.
Current OpenSSL code includes a BIO_clear_retry_flags() step in the
sock_write() function. Either we failed to copy the code correctly, or
they added this since we copied it. In any case, lack of the clear step
appears to be the cause of the server lockup after connection loss reported
in bug #8647 from Valentine Gogichashvili. Assume that this is correct
coding for all OpenSSL versions, and hence back-patch to all supported
branches.
Diagnosis and patch by Alexander Kukushkin.
HeapTupleSatisfiesUpdate can very easily "forget" tuple locks while
checking the contents of a multixact and finding it contains an aborted
update, by setting the HEAP_XMAX_INVALID bit. This would lead to
concurrent transactions not noticing any previous locks held by
transactions that might still be running, and thus being able to acquire
subsequent locks they wouldn't be normally able to acquire.
This bug was introduced in commit 1ce150b7bb; backpatch this fix to 9.3,
like that commit.
This change reverts the change to the delete-abort-savept isolation test
in 1ce150b7bb, because that behavior change was caused by this bug.
Noticed by Andres Freund while investigating a different issue reported
by Noah Misch.
Insertion to a non-leaf GIN page didn't make a full-page image of the page,
which is wrong. The code used to do it correctly, but was changed (commit
853d1c3103) because the redo-routine didn't
track incomplete splits correctly when the page was restored from a full
page image. Of course, that was not right way to fix it, the redo routine
should've been fixed instead. The redo-routine was surreptitiously fixed
in 2010 (commit 4016bdef8a), so all we need
to do now is revert the code that creates the record to its original form.
This doesn't change the format of the WAL record.
Backpatch to all supported versions.
When an external recovery command such as restore_command or
archive_cleanup_command fails, report the exit code properly,
distinguishing signals and normal exists, using the existing
wait_result_to_str() facility, instead of just reporting the return
value from system().
Reviewed-by: Peter Geoghegan <pg@heroku.com>
Remove the variable from the enclosing scopes so that nothing can be
relying on it. The net result of this refactoring is that we get rid
of a few unnecessary strlen() calls.
Original patch from Greg Jaskiewicz, substantially expanded by me.
If errordata_stack_depth < 0, we won't find that out and correct the
problem until CHECK_STACK_DEPTH() is invoked. In the meantime,
elevel will be set based on an invalid read. This is probably
harmless in practice, but it seems cleaner this way.
Xi Wang
Both heap_freeze_tuple() and heap_tuple_needs_freeze() neglected to look
into a multixact to check the members against cutoff_xid. This means
that a very old Xid could survive hidden within a multi, possibly
outliving its CLOG storage. In the distant future, this would cause
clog lookup failures:
ERROR: could not access status of transaction 3883960912
DETAIL: Could not open file "pg_clog/0E78": No such file or directory.
This mostly was problematic when the updating transaction aborted, since
in that case the row wouldn't get pruned away earlier in vacuum and the
multixact could possibly survive for a long time. In many cases, data
that is inaccessible for this reason way can be brought back
heuristically.
As a second bug, heap_freeze_tuple() didn't properly handle multixacts
that need to be frozen according to cutoff_multi, but whose updater xid
is still alive. Instead of preserving the update Xid, it just set Xmax
invalid, which leads to both old and new tuple versions becoming
visible. This is pretty rare in practice, but a real threat
nonetheless. Existing corrupted rows, unfortunately, cannot be repaired
in an automated fashion.
Existing physical replicas might have already incorrectly frozen tuples
because of different behavior than in master, which might only become
apparent in the future once pg_multixact/ is truncated; it is
recommended that all clones be rebuilt after upgrading.
Following code analysis caused by bug report by J Smith in message
CADFUPgc5bmtv-yg9znxV-vcfkb+JPRqs7m2OesQXaM_4Z1JpdQ@mail.gmail.com
and privately by F-Secure.
Backpatch to 9.3, where freezing of MultiXactIds was introduced.
Analysis and patch by Andres Freund, with some tweaks by Álvaro.
It is dangerous to do so, because some code expects to be able to see what's
the true Xmax even if it is aborted (particularly while traversing HOT
chains). So don't do it, and instead rely on the callers to verify for
abortedness, if necessary.
Several race conditions and bugs fixed in the process. One isolation test
changes the expected output due to these.
This also reverts commit c235a6a589, which is no longer necessary.
Backpatch to 9.3, where this function was introduced.
Andres Freund
Commit 9dc842f08 of 8.2 era prevented MultiXact truncation during crash
recovery, because there was no guarantee that enough state had been
setup, and because it wasn't deemed to be a good idea to remove data
during crash recovery anyway. Since then, due to Hot-Standby, streaming
replication and PITR, the amount of time a cluster can spend doing crash
recovery has increased significantly, to the point that a cluster may
even never come out of it. This has made not truncating the content of
pg_multixact/ not defensible anymore.
To fix, take care to setup enough state for multixact truncation before
crash recovery starts (easy since checkpoints contain the required
information), and move the current end-of-recovery actions to a new
TrimMultiXact() function, analogous to TrimCLOG().
At some later point, this should probably done similarly to the way
clog.c is doing it, which is to just WAL log truncations, but we can't
do that for the back branches.
Back-patch to 9.0. 8.4 also has the problem, but since there's no hot
standby there, it's much less pressing. In 9.2 and earlier, this patch
is simpler than in newer branches, because multixact access during
recovery isn't required. Add appropriate checks to make sure that's not
happening.
Andres Freund
While autovacuum dutifully launched anti-multixact-wraparound vacuums
when the multixact "age" was reached, the vacuum code was not aware that
it needed to make them be full table vacuums. As the resulting
partial-table vacuums aren't capable of actually increasing relminmxid,
autovacuum continued to launch anti-wraparound vacuums that didn't have
the intended effect, until age of relfrozenxid caused the vacuum to
finally be a full table one via vacuum_freeze_table_age.
To fix, introduce logic for multixacts similar to that for plain
TransactionIds, using the same GUCs.
Backpatch to 9.3, where permanent MultiXactIds were introduced.
Andres Freund, some cleanup by Álvaro
Parts of the code used autovacuum_freeze_max_age to determine whether
anti-multixact-wraparound vacuums are necessary, while others used a
hardcoded 200000000 value. This leads to problems when
autovacuum_freeze_max_age is set to a non-default value. Use the latter
everywhere.
Backpatch to 9.3, where vacuuming of multixacts was introduced.
Andres Freund
The various places that transferred fast-path locks to the main lock table
neglected to release the PGPROC's backendLock if SetupLockInTable failed
due to being out of shared memory. In most cases this is no big deal since
ensuing error cleanup would release all held LWLocks anyway. But there are
some hot-standby functions that don't consider failure of
FastPathTransferRelationLocks to be a hard error, and in those cases this
oversight could lead to system lockup. For consistency, make all of these
places look the same as FastPathTransferRelationLocks.
Noted while looking for the cause of Dan Wood's bugs --- this wasn't it,
but it's a bug anyway.
Prevent handle_sig_alarm from losing control partway through due to a query
cancel (either an asynchronous SIGINT, or a cancel triggered by one of the
timeout handler functions). That would at least result in failure to
schedule any required future interrupt, and might result in actual
corruption of timeout.c's data structures, if the interrupt happened while
we were updating those.
We could still lose control if an asynchronous SIGINT arrives just as the
function is entered. This wouldn't break any data structures, but it would
have the same effect as if the SIGALRM interrupt had been silently lost:
we'd not fire any currently-due handlers, nor schedule any new interrupt.
To forestall that scenario, forcibly reschedule any pending timer interrupt
during AbortTransaction and AbortSubTransaction. We can avoid any extra
kernel call in most cases by not doing that until we've allowed
LockErrorCleanup to kill the DEADLOCK_TIMEOUT and LOCK_TIMEOUT events.
Another hazard is that some platforms (at least Linux and *BSD) block a
signal before calling its handler and then unblock it on return. When we
longjmp out of the handler, the unblock doesn't happen, and the signal is
left blocked indefinitely. Again, we can fix that by forcibly unblocking
signals during AbortTransaction and AbortSubTransaction.
These latter two problems do not manifest when the longjmp reaches
postgres.c, because the error recovery code there kills all pending timeout
events anyway, and it uses sigsetjmp(..., 1) so that the appropriate signal
mask is restored. So errors thrown outside any transaction should be OK
already, and cleaning up in AbortTransaction and AbortSubTransaction should
be enough to fix these issues. (We're assuming that any code that catches
a query cancel error and doesn't re-throw it will do at least a
subtransaction abort to clean up; but that was pretty much required already
by other subsystems.)
Lastly, ProcSleep should not clear the LOCK_TIMEOUT indicator flag when
disabling that event: if a lock timeout interrupt happened after the lock
was granted, the ensuing query cancel is still going to happen at the next
CHECK_FOR_INTERRUPTS, and we want to report it as a lock timeout not a user
cancel.
Per reports from Dan Wood.
Back-patch to 9.3 where the new timeout handling infrastructure was
introduced. We may at some point decide to back-patch the signal
unblocking changes further, but I'll desist from that until we hear
actual field complaints about it.
Although user-defined relations can't be directly created in
pg_catalog, it's possible for them to end up there, because you can
create them in some other schema and then use ALTER TABLE .. SET SCHEMA
to move them there. Previously, such relations couldn't afterwards
be manipulated, because IsSystemRelation()/IsSystemClass() rejected
all attempts to modify objects in the pg_catalog schema, regardless
of their origin. With this patch, they now reject only those
objects in pg_catalog which were created at initdb-time, allowing
most operations on user-created tables in pg_catalog to proceed
normally.
This patch also adds new functions IsCatalogRelation() and
IsCatalogClass(), which is similar to IsSystemRelation() and
IsSystemClass() but with a slightly narrower definition: only TOAST
tables of system catalogs are included, rather than *all* TOAST tables.
This is currently used only for making decisions about when
invalidation messages need to be sent, but upcoming logical decoding
patches will find other uses for this information.
Andres Freund, with some modifications by me.
In the GIN incomplete-splits patch, I used BlockIdDatas to store the block
number of left and right children, when inserting a downlink after a split
to an internal page posting list page. But gin_desc thought they were stored
as BlockNumbers.
We have for a long time checked the head pointer of each of the backend's
proclock lists and skipped acquiring the corresponding locktable partition
lock if the head pointer was NULL. This was safe enough in the days when
proclock lists were changed only by the owning backend, but it is pretty
questionable now that the fast-path patch added cases where backends add
entries to other backends' proclock lists. However, we don't really wish
to revert to locking each partition lock every time, because in simple
transactions that would add a lot of useless lock/unlock cycles on
already-heavily-contended LWLocks. Fortunately, the only way that another
backend could be modifying our proclock list at this point would be if it
was promoting a formerly fast-path lock of ours; and any such lock must be
one that we'd decided not to delete in the previous loop over the locallock
table. So it's okay if we miss seeing it in this loop; we'd just decide
not to delete it again. However, once we've detected a non-empty list,
we'd better re-fetch the list head pointer after acquiring the partition
lock. This guards against possibly fetching a corrupt-but-non-null pointer
if pointer fetch/store isn't atomic. It's not clear if any practical
architectures are like that, but we've never assumed that before and don't
wish to start here. In any case, the situation certainly deserves a code
comment.
While at it, refactor the partition traversal loop to use a for() construct
instead of a while() loop with goto's.
Back-patch, just in case the risk is real and not hypothetical.
Instead of simply checking the KEYS_UPDATED bit, we need to check
whether each lock held on the future version of the tuple conflicts with
the lock we're trying to acquire.
Per bug report #8434 by Tomonari Katsumata
Not doing so causes us to traverse an update chain that has been broken
by concurrent page pruning. All other code that traverses update chains
uses this check as one of the cases in which to stop iterating, so
replicate it here too. Failure to do so leads to erroneous CLOG,
subtrans or multixact lookups.
Per discussion following the bug report by J Smith in
CADFUPgc5bmtv-yg9znxV-vcfkb+JPRqs7m2OesQXaM_4Z1JpdQ@mail.gmail.com
as diagnosed by Andres Freund.
If a transaction updates/deletes a tuple just before aborting, and a
concurrent transaction tries to prune the page concurrently, the pruner
may see HeapTupleSatisfiesVacuum return HEAPTUPLE_DELETE_IN_PROGRESS,
but a later call to HeapTupleGetUpdateXid() return InvalidXid. This
would cause an assertion failure in development builds, but would be
otherwise Mostly Harmless.
Fix by checking whether the updater Xid is valid before trying to apply
it as page prune point.
Reported by Andres in 20131124000203.GA4403@alap2.anarazel.de
The reason for the fetch failure is that the tuple was removed because
it was dead; so the failure is innocuous and can be ignored. Moreover,
there's no need for further work and we can return success to the caller
immediately. EvalPlanQualFetch is doing something very similar to this
already.
Report and test case from Andres Freund in
20131124000203.GA4403@alap2.anarazel.de
When acquiring a lock in fast-path mode, we must reset the locallock
object's lock and proclock fields to NULL. They are not necessarily that
way to start with, because the locallock could be left over from a failed
lock acquisition attempt earlier in the transaction. Failure to do this
led to all sorts of interesting misbehaviors when LockRelease tried to
clean up no-longer-related lock and proclock objects in shared memory.
Per report from Dan Wood.
In passing, modify LockRelease to elog not just Assert if it doesn't find
lock and proclock objects for a formerly fast-path lock, matching the code
in FastPathGetRelationLockEntry and LockRefindAndRelease. This isn't a
bug but it will help in diagnosing any future bugs in this area.
Also, modify FastPathTransferRelationLocks and FastPathGetRelationLockEntry
to break out of their loops over the fastpath array once they've found the
sole matching entry. This was inconsistently done in some search loops
and not others.
Improve assorted related comments, too.
Back-patch to 9.2 where the fast-path mechanism was introduced.
Correct an obsolete statement that no backend touches another backend's
PROCLOCK lists. This was probably wrong even when written (the deadlock
checker looks at everybody's lists), and it's certainly quite wrong now
that fast-path locking can require creation of lock and proclock objects
on behalf of another backend. Also improve some statements in the hot
standby explanation, and do one or two other trivial bits of wordsmithing/
reformatting.
Replace it with an approach similar to what GiST uses: when a page is split,
the left sibling is marked with a flag indicating that the parent hasn't been
updated yet. When the parent is updated, the flag is cleared. If an insertion
steps on a page with the flag set, it will finish split before proceeding
with the insertion.
The post-recovery cleanup mechanism was never totally reliable, as insertion
to the parent could fail e.g because of running out of memory or disk space,
leaving the tree in an inconsistent state.
This also divides the responsibility of WAL-logging more clearly between
the generic ginbtree.c code, and the parts specific to entry and posting
trees. There is now a common WAL record format for insertions and deletions,
which is written by ginbtree.c, followed by tree-specific payload, which is
returned by the placetopage- and split- callbacks.
Separate the insertion payload from the more static portions of GinBtree.
GinBtree now only contains information related to searching the tree, and
the information of what to insert is passed separately.
Add root block number to GinBtree, instead of passing it around all the
functions as argument.
Split off ginFinishSplit() from ginInsertValue(). ginFinishSplit is
responsible for finding the parent and inserting the downlink to it.
Vacuum recognizes that it can update relfrozenxid by checking whether it has
processed all pages of a relation. Unfortunately it performed that check
after truncating the dead pages at the end of the relation, and used the new
number of pages to decide whether all pages have been scanned. If the new
number of pages happened to be smaller or equal to the number of pages
scanned, it incorrectly decided that all pages were scanned.
This can lead to relfrozenxid being updated, even though some pages were
skipped that still contain old XIDs. That can lead to data loss due to xid
wraparounds with some rows suddenly missing. This likely has escaped notice
so far because it takes a large number (~2^31) of xids being used to see the
effect, while a full-table vacuum before that would fix the issue.
The incorrect logic was introduced by commit
b4b6923e03. Backpatch this fix down to 8.4,
like that commit.
Andres Freund, with some modifications by me.
Reviewed-by: Ali Dar <ali.munir.dar@gmail.com>
Reviewed-by: Amit Khandekar <amit.khandekar@enterprisedb.com>
Reviewed-by: Rodolfo Campero <rodolfo.campero@anachronics.com>
Alvaro Herrera
Robert Haas
Heikki Linnakangas
Stephen Frost
Tom Lane
Jeff Davis
Peter Eisentraut
Bruce Momjian
Noah Misch
Andrew Dunstan
Fujii Masao
Simon Riggs
Magnus Hagander
Kevin Grittner
Tatsuo Ishii