It was already on its last legs, and it turns out that it was
accidentally broken in commit 89e850e6fd
and no one cared. So remove the rest the support for it and update
the documentation to indicate that Python 2.3 is now required.
In checkpointer and walwriter, avoid calling PostmasterIsAlive unless
WaitLatch has reported WL_POSTMASTER_DEATH. This saves a kernel call per
iteration of the process's outer loop, which is not all that much, but a
cycle shaved is a cycle earned. I had already removed the unconditional
PostmasterIsAlive calls in bgwriter and pgstat in previous patches, but
forgot that WL_POSTMASTER_DEATH is supposed to be treated as untrustworthy
(per comment in unix_latch.c); so adjust those two cases to match.
There are a few other places where the same idea might be applied, but only
after substantial code rearrangement, so I didn't bother.
Get rid of some more naming choices that only make sense if you know that
this code used to be in the bgwriter, as well as some stray comments
referencing the bgwriter.
Commit 6d90eaaa89 added a hibernation mode
to the bgwriter to reduce the server's idle-power consumption. However,
its interaction with the detailed behavior of BgBufferSync's feedback
control loop wasn't very well thought out. That control loop depends
primarily on the rate of buffer allocation, not the rate of buffer
dirtying, so the hibernation mode has to be designed to operate only when
no new buffer allocations are happening. Also, the check for whether the
system is effectively idle was not quite right and would fail to detect
a constant low level of activity, thus allowing the bgwriter to go into
hibernation mode in a way that would let the cycle time vary quite a bit,
possibly further confusing the feedback loop. To fix, move the wakeup
support from MarkBufferDirty and SetBufferCommitInfoNeedsSave into
StrategyGetBuffer, and prevent the bgwriter from entering hibernation mode
unless no buffer allocations have happened recently.
In addition, fix the delaying logic to remove the problem of possibly not
responding to signals promptly, which was basically caused by trying to use
the process latch's is_set flag for multiple purposes. I can't prove it
but I'm suspicious that that hack was responsible for the intermittent
"postmaster does not shut down" failures we've been seeing in the buildfarm
lately. In any case it did nothing to improve the readability or
robustness of the code.
In passing, express the hibernation sleep time as a multiplier on
BgWriterDelay, not a constant. I'm not sure whether there's any value in
exposing the longer sleep time as an independently configurable setting,
but we can at least make it act like this for little extra code.
Every time since the current rule for postgres.bki was put in place
when we change the major version, people complain that their tests
fail in strange ways. This is because the version number in
postgres.bki is not updated, because it has no dependency for that.
And you can't even force the rebuild manually if you don't happen to
know which file has the problem. Fix that now before it will happen
again.
The only remaining problem with switching major versions, as far as
the regression tests are concerned, is that contrib needs to be
rebuilt. But that's easily invoked, and in any case the failure modes
are more friendly if you forget that.
Users of asynchronous-commit mode expect there to be a guaranteed maximum
delay before an async commit's WAL records get flushed to disk. The
original version of the walwriter hibernation patch broke that. Add an
extra shared-memory flag to allow async commits to kick the walwriter out
of hibernation mode, without adding any noticeable overhead in cases where
no action is needed.
Latch-ify the stats collector, so that it does not need an arbitrary wakeup
cycle to check for postmaster death. The incremental savings in idle power
is pretty marginal, since we only had it waking every two seconds; but I
believe that this patch may also improve the collector's performance under
load, by reducing the number of kernel calls made per message when messages
are arriving constantly (we now avoid a select/poll call except when we
need to sleep). The change also reduces the time needed for a normal
database shutdown on platforms where signals don't interrupt select().
This patch modifies the walwriter process so that, when it has not found
anything useful to do for many consecutive wakeup cycles, it extends its
sleep time to reduce the server's idle power consumption. It reverts to
normal as soon as it's done any successful flushes. It's still true that
during any async commit, backends check for completed, unflushed pages of
WAL and signal the walwriter if there are any; so that in practice the
walwriter can get awakened and returned to normal operation sooner than the
sleep time might suggest.
Also, improve the checkpointer so that it uses a latch and a computed delay
time to not wake up at all except when it has something to do, replacing a
previous hardcoded 0.5 sec wakeup cycle. This also is primarily useful for
reducing the server's power consumption when idle.
In passing, get rid of the dedicated latch for signaling the walwriter in
favor of using its procLatch, since that comports better with possible
generic signal handlers using that latch. Also, fix a pre-existing bug
with failure to save/restore errno in walwriter's signal handlers.
Peter Geoghegan, somewhat simplified by Tom
This adds the variable COMP_KEYWORD_CASE, which controls in what case
keywords are completed. This is partially to let users configure the
change from commit 69f4f1c357, but it
also offers more behaviors than were available before.
Because they use their own compilation rule, they don't use the
dependency tracking logic from Makefile.global. To make sure that
dependency tracking works anyway for the *_srv.o files, depend on
their *.o siblings as well, which do have proper dependencies. It's a
hack that might fail someday if there is a *_srv.o without a
corresponding *.o, but it works for now (and those would probably go
into src/backend/port/ anyway).
According to the Autoconf documentation, there should be a make rule
pg_config.h: stamp-h
so that with the right setup around this, a change in pg_config.h.in
will trigger a rebuild of everything that depends on pg_config.h. But
this doesn't always work, sometimes you need to run make twice to get
everything up to date after a change of pg_config.h.in.
The fix is to write the rule as
pg_config.h: stamp-h ;
instead (with an empty command instead of no command). This is what
Automake-generated makefiles effectively do, so it seems safe to be on
this side.
It's not actually clear why this is (apparently) more correct. It's
been posted to
<http://lists.gnu.org/archive/html/help-make/2012-04/msg00058.html>
without response so far.
"Unexpected EOF on client connection" without an open transaction
is mostly noise, so turn it into DEBUG1. With an open transaction it's
still indicating a problem, so keep those as ERROR, and change the message
to indicate that it happened in a transaction.
Commit 62c7bd31c8 had assorted problems, most
visibly that it broke PREPARE TRANSACTION in the presence of session-level
advisory locks (which should be ignored by PREPARE), as per a recent
complaint from Stephen Rees. More abstractly, the patch made the
LockMethodData.transactional flag not merely useless but outright
dangerous, because in point of fact that flag no longer tells you anything
at all about whether a lock is held transactionally. This fix therefore
removes that flag altogether. We now rely entirely on the convention
already in use in lock.c that transactional lock holds must be owned by
some ResourceOwner, while session holds are never so owned. Setting the
locallock struct's owner link to NULL thus denotes a session hold, and
there is no redundant marker for that.
PREPARE TRANSACTION now works again when there are session-level advisory
locks, and it is also able to transfer transactional advisory locks to the
prepared transaction, but for implementation reasons it throws an error if
we hold both types of lock on a single lockable object. Perhaps it will be
worth improving that someday.
Assorted other minor cleanup and documentation editing, as well.
Back-patch to 9.1, except that in the 9.1 branch I did not remove the
LockMethodData.transactional flag for fear of causing an ABI break for
any external code that might be examining those structs.
Add test cases for inline handler of plython2u (when using that
language name), and for result object element assignment. There is
now at least one test case for every top-level functionality, except
plpy.Fatal (annoying to use in regression tests) and result object
slice retrieval and slice assignment (which are somewhat broken).
Allocate PLyResultObject.tupdesc in TopMemoryContext, because its
lifetime is the lifetime of the Python object and it shouldn't be
freed by some other memory context, such as one controlled by SPI. We
trust that the Python object will clean up its own memory.
Before, this would crash the included regression test case by trying
to use memory that was already freed.
reported by Asif Naeem, analysis by Tom Lane
At the time we check whether the tuple is dead to all running
transactions, we've already verified that it isn't visible to our
scan, setting hint bits if appropriate. So there's no need to
recheck CLOG for the all-dead test we do just a moment later.
So, add HeapTupleIsSurelyDead() to test the appropriate condition
under the assumption that all relevant hit bits are already set.
Review by Tom Lane.
Remove the following ports:
- dgux
- nextstep
- sunos4
- svr4
- ultrix4
- univel
These are obsolete and not worth rescuing. In most cases, there is
circumstantial evidence that they wouldn't work anymore anyway.
This patch adjusts the core statistics views to match the decision already
taken for pg_stat_statements, that values representing elapsed time should
be represented as float8 and measured in milliseconds. By using float8,
we are no longer tied to a specific maximum precision of timing data.
(Internally, it's still microseconds, but we could now change that without
needing changes at the SQL level.)
The columns affected are
pg_stat_bgwriter.checkpoint_write_time
pg_stat_bgwriter.checkpoint_sync_time
pg_stat_database.blk_read_time
pg_stat_database.blk_write_time
pg_stat_user_functions.total_time
pg_stat_user_functions.self_time
pg_stat_xact_user_functions.total_time
pg_stat_xact_user_functions.self_time
The first four of these are new in 9.2, so there is no compatibility issue
from changing them. The others require a release note comment that they
are now double precision (and can show a fractional part) rather than
bigint as before; also their underlying statistics functions now match
the column definitions, instead of returning bigint microseconds.
In ancient times, it was thought that this wouldn't work because of
TrapMacro/AssertMacro, but changing those to use a comma operator
appears to work without compiler warnings.
Normally whole-row Vars are printed as "tabname.*". However, that does not
work at top level of a targetlist, because per SQL standard the parser will
think that the "*" should result in column-by-column expansion; which is
not at all what a whole-row Var implies. We used to just print the table
name in such cases, which works most of the time; but it fails if the table
name matches a column name available anywhere in the FROM clause. This
could lead for instance to a view being interpreted differently after dump
and reload. Adding parentheses doesn't fix it, but there is a reasonably
simple kluge we can use instead: attach a no-op cast, so that the "*" isn't
syntactically at top level anymore. This makes the printing of such
whole-row Vars a lot more consistent with other Vars, and may indeed fix
more cases than just the reported one; I'm suspicious that cases involving
schema qualification probably didn't work properly before, either.
Per bug report and fix proposal from Abbas Butt, though this patch is quite
different in detail from his.
Back-patch to all supported versions.
If it fails to open a new log file, the syslogger assumes there's something
wrong with its parameters (such as log_directory), and stops attempting
automatic time-based or size-based log file rotations. Sending it SIGHUP
is supposed to start that up again. However, the original coding for that
was really bogus, involving clobbering a couple of GUC variables and hoping
that SIGHUP processing would restore them. Get rid of that technique in
favor of maintaining a separate flag showing we've turned rotation off.
Per report from Mark Kirkwood.
Also, the syslogger will automatically attempt to create the log_directory
directory if it doesn't exist, but that was only happening at startup.
For consistency and ease of use, it should do the same whenever the value
of log_directory is changed by SIGHUP.
Back-patch to all supported branches.
The alternative of disallowing index-only scans in HS operation was
discussed, but the consensus was that it was better to treat marking
a page all-visible as a recovery conflict for snapshots that could still
fail to see XIDs on that page. We may in the future try to soften this,
so that we simply force index scans to do heap fetches in cases where
this may be an issue, rather than throwing a hard conflict.
bitmap_scan_cost_est() has to be able to cope with a BitmapOrPath, but
I'd taken a shortcut that didn't work for that case. Noted by Heikki.
Add some regression tests since this area is evidently under-covered.
Before 9.1, PL/Python functions returning composite types could return
a string and it would be parsed using record_in. The 9.1 changes made
PL/Python only expect dictionaries, tuples, or objects supporting
getattr as output of composite functions, resulting in a regression
and a confusing error message, as the strings were interpreted as
sequences and the code for transforming lists to database tuples was
used. Fix this by treating strings separately as before, before
checking for the other types.
The reason why it's important to support string to database tuple
conversion is that trigger functions on tables with composite columns
get the composite row passed in as a string (from record_out).
Without supporting converting this back using record_in, this makes it
impossible to implement pass-through behavior for these columns, as
PL/Python no longer accepts strings for composite values.
A better solution would be to fix the code that transforms composite
inputs into Python objects to produce dictionaries that would then be
correctly interpreted by the Python->PostgreSQL counterpart code. But
that would be too invasive to backpatch to 9.1, and it is too late in
the 9.2 cycle to attempt it. It should be revisited in the future,
though.
Reported as bug #6559 by Kirill Simonov.
Jan Urbański
We have been seeing intermittent buildfarm failures due to a query
sometimes not using an index-only scan plan, because a background
auto-ANALYZE prevented the table's all-visible bits from being set
immediately, thereby causing the estimated cost of an index-only scan
to go up considerably. Adjust the test case so that a bitmap index scan is
preferred instead, which serves equally well for the purpose the test case
is actually meant for. (Of course, it would be better to eliminate the
interference from auto-ANALYZE, but I see no low-risk way to do that,
so any such fix will have to be left for 9.3 or later.)
setrefs.c failed to do "rtoffset" adjustment of Vars in RETURNING lists,
which meant they were left with the wrong varnos when the RETURNING list
was in a subquery. That was never possible before writable CTEs, of
course, but now it's broken. The executor fails to notice any problem
because ExecEvalVar just references the ecxt_scantuple for any normal
varno; but EXPLAIN breaks when the varno is wrong, as illustrated in a
recent complaint from Bartosz Dmytrak.
Since the eventual rtoffset of the subquery is not known at the time
we are preparing its plan node, the previous scheme of executing
set_returning_clause_references() at that time cannot handle this
adjustment. Fortunately, it turns out that we don't really need to do it
that way, because all the needed information is available during normal
setrefs.c execution; we just have to dig it out of the ModifyTable node.
So, do that, and get rid of the kluge of early setrefs processing of
RETURNING lists. (This is a little bit of a cheat in the case of inherited
UPDATE/DELETE, because we are not passing a "root" struct that corresponds
exactly to what the subplan was built with. But that doesn't matter, and
anyway this is less ugly than early setrefs processing was.)
Back-patch to 9.1, where the problem became possible to hit.
Due to rather sloppy thinking (on my part, I'm afraid) about the
appropriate behavior for boundary conditions, pg_next_dst_boundary() gave
undefined, platform-dependent results when the input time is exactly the
last recorded DST transition time for the specified time zone, as a result
of fetching values one past the end of its data arrays.
Change its specification to be that it always finds the next DST boundary
*after* the input time, and adjust code to match that. The sole existing
caller, DetermineTimeZoneOffset, doesn't actually care about this
distinction, since it always uses a probe time earlier than the instant
that it does care about. So it seemed best to me to change the API to make
the result=1 and result=0 cases more consistent, specifically to ensure
that the "before" outputs always describe the state at the given time,
rather than hacking the code to obey the previous API comment exactly.
Per bug #6605 from Sergey Burladyan. Back-patch to all supported versions.
Prohibiting this outright would break dumps taken from older versions
that contain such casts, which would create far more pain than is
justified here.
Per report by Jaime Casanova and subsequent discussion.
We must set the visibility map bit before releasing our exclusive lock
on the heap page; otherwise, someone might clear the heap page bit
before we set the visibility map bit, leading to a situation where the
visibility map thinks the page is all-visible but it's really not.
This problem has existed since 8.4, but it wasn't critical before we
had index-only scans, since the worst case scenario was that the page
wouldn't get vacuumed until the next scan_all vacuum.
Along the way, a couple of minor, related improvements: (1) if we
pause the heap scan to do an index vac cycle, release any visibility
map page we're holding, since really long-running pins are not good
for a variety of reasons; and (2) warn if we see a page that's marked
all-visible in the visibility map but not on the page level, since
that should never happen any more (it was allowed in previous
releases, but not in 9.2).
Instead of an exact cost comparison, use a fuzzy comparison with 1e-10
delta after all other path metrics have proved equal. This is to avoid
having platform-specific roundoff behaviors determine the choice when
two paths are really the same to our cost estimators. Adjust the
recently-added test case that made it obvious we had a problem here.
The original syntax wasn't universally loved, and it didn't allow its
usage in CREATE TABLE, only ALTER TABLE. It now works everywhere, and
it also allows using ALTER TABLE ONLY to add an uninherited CHECK
constraint, per discussion.
The pg_constraint column has accordingly been renamed connoinherit.
This commit partly reverts some of the changes in
61d81bd28d, particularly some pg_dump and
psql bits, because now pg_get_constraintdef includes the necessary NO
INHERIT within the constraint definition.
Author: Nikhil Sontakke
Some tweaks by me
For an initial relation that lacks any join clauses (that is, it has to be
cartesian-product-joined to the rest of the query), we considered only
cartesian joins with initial rels appearing later in the initial-relations
list. This creates an undesirable dependency on FROM-list order. We would
never fail to find a plan, but perhaps we might not find the best available
plan. Noted while discussing the logic with Amit Kapila.
Improve the comments a bit in this area, too.
Arguably this is a bug fix, but given the lack of complaints from the
field I'll refrain from back-patching.
This patch adjusts the treatment of parameterized paths so that all paths
with the same parameterization (same set of required outer rels) for the
same relation will have the same rowcount estimate. We cache the rowcount
estimates to ensure that property, and hopefully save a few cycles too.
Doing this makes it practical for add_path_precheck to operate without
a rowcount estimate: it need only assume that paths with different
parameterizations never dominate each other, which is close enough to
true anyway for coarse filtering, because normally a more-parameterized
path should yield fewer rows thanks to having more join clauses to apply.
In add_path, we do the full nine yards of comparing rowcount estimates
along with everything else, so that we can discard parameterized paths that
don't actually have an advantage. This fixes some issues I'd found with
add_path rejecting parameterized paths on the grounds that they were more
expensive than not-parameterized ones, even though they yielded many fewer
rows and hence would be cheaper once subsequent joining was considered.
To make the same-rowcounts assumption valid, we have to require that any
parameterized path enforce *all* join clauses that could be obtained from
the particular set of outer rels, even if not all of them are useful for
indexing. This is required at both base scans and joins. It's a good
thing anyway since the net impact is that join quals are checked at the
lowest practical level in the join tree. Hence, discard the original
rather ad-hoc mechanism for choosing parameterization joinquals, and build
a better one that has a more principled rule for when clauses can be moved.
The original rule was actually buggy anyway for lack of knowledge about
which relations are part of an outer join's outer side; getting this right
requires adding an outer_relids field to RestrictInfo.
This has been wrong for a really long time. We don't use two-phase
locking to protect against serialization anomalies.
Per discussion on pgsql-hackers about 2011-03-07; original report
by Dan Ports.
The previous code could cause a backend crash after BEGIN; SAVEPOINT a;
LOCK TABLE foo (interrupted by ^C or statement timeout); ROLLBACK TO
SAVEPOINT a; LOCK TABLE foo, and might have leaked strong-lock counts
in other situations.
Report by Zoltán Böszörményi; patch review by Jeff Davis.
Previously, we used SetBufferCommitInfoNeedsSave, but that's really
intended for dirty-marks we can theoretically afford to lose, such as
hint bits. As for 9.2, the PD_ALL_VISIBLE mustn't be lost in this
way, since we could then end up with a heap page that isn't
all-visible and a visibility map page that is all visible, causing
index-only scans to return wrong answers.
Mostly, this consists of adding support for fields which exist in the
structure but aren't handled by copy/equal/outfuncs; but the create
foreign table case can actually produce garbage output.
Noah Misch
A number of utility programs were rather careless about paremeters
that can be set via both an option argument and a positional
argument. This leads to results which can violate the Principal
Of Least Astonishment. These changes refuse to use positional
arguments to override settings that have been made via positional
arguments. The changes are backpatched to all live branches.
When using synchronous replication, we waited for the commit record to be
replicated, but if we our transaction didn't write any other WAL records,
that's not required because we don't even flush the WAL locally to disk in
that case. This lead to long waits when committing a transaction that only
modified a temporary table. Bug spotted by Thom Brown.
The header file is needed by any module that wants to use the PL/pgSQL
instrumentation plugin interface. Most notably, the pldebugger plugin needs
this. With this patch, it can be built using pgxs, without having the full
server source tree available.
The result object methods colnames() etc. would crash when called
after a command that did not produce a result set. Now they throw an
exception.
discovery and initial patch by Jean-Baptiste Quenot
The output of the new pg_xlog_location_diff function is of type numeric,
since it could theoretically overflow an int8 due to signedness; this
provides a convenient way to format such values.
Fujii Masao, with some beautification by me.
So far as I can tell, it is no longer possible for this heuristic to do
anything useful, because the new weaker definition of
have_relevant_joinclause means that any relation with a joinclause must be
considered joinable to at least one other relation. It would still be
possible for the code block to be entered, for example if there are join
order restrictions that prevent any join of the current level from being
formed; but in that case it's just a waste of cycles to attempt to form
cartesian joins, since the restrictions will still apply.
Furthermore, IMO the existence of this code path can mask bugs elsewhere;
we would have noticed the problem with cartesian joins a lot sooner if
this code hadn't compensated for it in the simplest case.
Accordingly, let's remove it and see what happens. I'm committing this
separately from the prerequisite changes in have_relevant_joinclause,
just to make the question easier to revisit if there is some fault in
my logic.
We should be willing to cross-join two small relations if that allows us
to use an inner indexscan on a large relation (that is, the potential
indexqual for the large table requires both smaller relations). This
worked in simple cases but fell apart as soon as there was a join clause
to a fourth relation, because the existence of any two-relation join clause
caused the planner to not consider clauseless joins between other base
relations. The added regression test shows an example case adapted from
a recent complaint from Benoit Delbosc.
Adjust have_relevant_joinclause, have_relevant_eclass_joinclause, and
has_relevant_eclass_joinclause to consider that a join clause mentioning
three or more relations is sufficient grounds for joining any subset of
those relations, even if we have to do so via a cartesian join. Since such
clauses are relatively uncommon, this shouldn't affect planning speed on
typical queries; in fact it should help a bit, because the latter two
functions in particular get significantly simpler.
Although this is arguably a bug fix, I'm not going to risk back-patching
it, since it might have currently-unforeseen consequences.
Per mailing list discussion, we would like to keep the bytea functions
parallel to the text functions, so rename bytea_agg to string_agg,
which already exists for text.
Also, to satisfy the rule that we don't want aggregate functions of
the same name with a different number of arguments, add a delimiter
argument, just like string_agg for text already has.
cost_index's method for estimating per-tuple costs of evaluating filter
conditions (a/k/a qpquals) was completely wrong in the presence of derived
indexable conditions, such as range conditions derived from a LIKE clause.
This was largely masked in common cases as a result of all simple operator
clauses having about the same costs, but it could show up in a big way when
dealing with functional indexes containing expensive functions, as seen for
example in bug #6579 from Istvan Endredy. Rejigger the calculation to give
sane answers when the indexquals aren't a subset of the baserestrictinfo
list. As a side benefit, we now do the calculation properly for cases
involving join clauses (ie, parameterized indexscans), which we always
overestimated before.
There are still cases where this is an oversimplification, such as clauses
that can be dropped because they are implied by a partial index's
predicate. But we've never accounted for that in cost estimates before,
and I'm not convinced it's worth the cycles to try to do so.
Previously we attempted to throw an error or at least warning for missing
schemas, but this was done inconsistently because of implementation
restrictions (in many cases, GUC settings are applied outside transactions
so that we can't do system catalog lookups). Furthermore, there were
exceptions to the rule even in the beginning, and we'd been poking more
and more holes in it as time went on, because it turns out that there are
lots of use-cases for having some irrelevant items in a common search_path
value. It seems better to just adopt a philosophy similar to what's always
been done with Unix PATH settings, wherein nonexistent or unreadable
directories are silently ignored.
This commit also fixes the documentation to point out that schemas for
which the user lacks USAGE privilege are silently ignored. That's always
been true but was previously not documented.
This is mostly in response to Robert Haas' complaint that 9.1 started to
throw errors or warnings for missing schemas in cases where prior releases
had not. We won't adopt such a significant behavioral change in a back
branch, so something different will be needed in 9.1.
postgres:// URIs are an attempt to "stop the bleeding" in this general
area that has been said to occur due to external projects adopting their
own syntaxes. The syntaxes supported by this patch:
postgres://[user[:pwd]@][unix-socket][:port[/dbname]][?param1=value1&...]
postgres://[user[:pwd]@][net-location][:port][/dbname][?param1=value1&...]
should be enough to cover most interesting cases without having to
resort to "param=value" pairs, but those are provided for the cases that
need them regardless.
libpq documentation has been shuffled around a bit, to avoid stuffing
all the format details into the PQconnectdbParams description, which was
already a bit overwhelming. The list of keywords has moved to its own
subsection, and the details on the URI format live in another subsection.
This includes a simple test program, as requested in discussion, to
ensure that interesting corner cases continue to work appropriately in
the future.
Author: Alexander Shulgin
Some tweaking by Álvaro Herrera, Greg Smith, Daniel Farina, Peter Eisentraut
Reviewed by Robert Haas, Alexey Klyukin (offlist), Heikki Linnakangas,
Marko Kreen, and others
Oh, it also supports postgresql:// but that's probably just an accident.
This definition is convenient when applying the function to the
reltablespace column of pg_class, since that's what zero means there;
and it doesn't interfere with any other plausible use of the function.
Per gripe from Bruce Momjian.
This patch reverts commit 191ef2b407
and thereby restores the pre-7.3 behavior of EXTRACT(EPOCH FROM
timestamp-without-tz). Per discussion, the more recent behavior was
misguided on a couple of grounds: it makes it hard to get a
non-timezone-aware epoch value for a timestamp, and it makes this one
case dependent on the value of the timezone GUC, which is incompatible
with having timestamp_part() labeled as immutable.
The other behavior is still available (in all releases) by explicitly
casting the timestamp to timestamp with time zone before applying EXTRACT.
This will need to be called out as an incompatible change in the 9.2
release notes. Although having mutable behavior in a function marked
immutable is clearly a bug, we're not going to back-patch such a change.
estimate_num_groups() gets unhappy with
create table empty();
select * from empty except select * from empty e2;
I can't see any actual use-case for such a query (and the table is illegal
per SQL spec), but it seems like a good idea that it not cause an assert
failure.
The case could not arise when this code was originally written, but it can
now (since we made zero-column MergeJoins work for the benefit of FULL JOIN
ON TRUE). I don't think there is any actual bug here, but we might as well
treat it consistently with other uses of COPY_POINTER_FIELD(). Per comment
from Ashutosh Bapat.
This was a thinko in previous commit. Now that stack base pointer is now set
in PostmasterMain and SubPostmasterMain, it doesn't need to be set in
PostgresMain anymore.
We used to only initialize the stack base pointer when starting up a regular
backend, not in other processes. In particular, autovacuum workers can run
arbitrary user code, and without stack-depth checking, infinite recursion
in e.g an index expression will bring down the whole cluster.
The comment about PL/Java using set_stack_base() is not yet true. As the
code stands, PL/java still modifies the stack_base_ptr variable directly.
However, it's been discussed in the PL/Java mailing list that it should be
changed to use the function, because PL/Java is currently oblivious to the
register stack used on Itanium. There's another issues with PL/Java, namely
that the stack base pointer it sets is not really the base of the stack, it
could be something close to the bottom of the stack. That's a separate issue
that might need some further changes to this code, but that's a different
story.
Backpatch to all supported releases.
XLOG_GIN_UPDATE_META_PAGE and XLOG_GIN_DELETE_LISTPAGE records were printed
with a list link field labeled as "blkno", which was confusing, especially
when the link was empty (InvalidBlockNumber). Print the metapage block
number instead, since that's what's actually being updated. We could
include the link values too as a separate field, but not clear it's worth
the trouble.
Back-patch to 8.4 where the dubious code was added.
Commit 337b6f5ecf contained the entirely
fanciful assumption that it had made comparetup_datum unreachable.
Reported and patched by Takashi Yamamoto.
Fix up some not terribly accurate/useful comments from that commit, too.
If we make the initially-called function return the table physical-size
estimate, acquire_inherited_sample_rows will be able to use that to
allocate numbers of samples among child tables, when the day comes that
we want to support foreign tables in inheritance trees.
ANALYZE now accepts foreign tables and allows the table's FDW to control
how the sample rows are collected. (But only manual ANALYZEs will touch
foreign tables, for the moment, since among other things it's not very
clear how to handle remote permissions checks in an auto-analyze.)
contrib/file_fdw is extended to support this.
Etsuro Fujita, reviewed by Shigeru Hanada, some further tweaking by me.
Somebody didn't bother to fix this comment while adding foreign table
support to the code below it.
In passing, remove the explicit calling-out of relkind letters, which adds
complexity to the comment but doesn't help in understanding the code.
Ants Aasma's original patch to add timing information for buffer I/O
requests exposed this data at the relation level, which was judged too
costly. I've here exposed it at the database level instead.
The parser got confused if a cursor parameter had the same name as
a plpgsql variable. Reported and diagnosed by Yeb Havinga, though
this isn't exactly his proposed fix.
Also, some mostly-but-not-entirely-cosmetic adjustments to the original
named-cursor-parameter patch, for code readability and better error
diagnostics.
Traditionally libpq has collected an entire query result before passing
it back to the application. That provides a simple and transactional API,
but it's pretty inefficient for large result sets. This patch allows the
application to process each row on-the-fly instead of accumulating the
rows into the PGresult. Error recovery becomes a bit more complex, but
often that tradeoff is well worth making.
Kyotaro Horiguchi, reviewed by Marko Kreen and Tom Lane
There is no existing or foreseeable case in which psql should see a
PGRES_COPY_BOTH PQresultStatus; and if such a case ever emerges, it's a
pretty good bet that these code fragments wouldn't do the right thing
anyway. Remove them, and let the existing default cases do the appropriate
thing, namely emit an "unexpected PQresultStatus" bleat.
Noted while working on libpq row processor patch, for which I was
considering adding a PGRES_SUSPENDED status code --- the same default-case
treatment would be appropriate for that.
The original coding of the syslogger had an arbitrary limit of 20 large
messages concurrently in progress, after which it would just punt and dump
message fragments to the output file separately. Our ambitions are a bit
higher than that now, so allow the data structure to expand as necessary.
Reported and patched by Andrew Dunstan; some editing by Tom
Combining the loop workspace with the record of already-processed objects
might have been a cute trick, but it behaves horridly if there are many
dependency loops to repair: the time spent in the first step of findLoop()
grows as O(N^2). Instead use a separate flag array indexed by dump ID,
which we can check in constant time. The length of the workspace array
is now never more than the actual length of a dependency chain, which
should be reasonably short in all cases of practical interest. The code
is noticeably easier to understand this way, too.
Per gripe from Mike Roest. Since this is a longstanding performance bug,
backpatch to all supported versions.
The loop that matched owned sequences to their owning tables required time
proportional to number of owned sequences times number of tables; although
this work was only expended in selective-dump situations, which is probably
why the issue wasn't recognized long since. Refactor slightly so that we
can perform this work after the index array for findTableByOid has been
set up, reducing the time to O(M log N).
Per gripe from Mike Roest. Since this is a longstanding performance bug,
backpatch to all supported versions.
ecpg and pg_dump each contain keyword arrays with structure similar
to the backend's keyword array. Up to now, we actually named those
arrays the same as the backend's and relied on parser/keywords.h
to declare them. This seems a tad too cute, though, and it breaks
now that we need to PGDLLIMPORT-decorate the backend symbols.
Rename to avoid the problem. Per buildfarm.
(It strikes me that maybe we should get rid of the separate keywords.c
files altogether, and just define these arrays in the modules that use
them, but that's a rather more invasive change.)
Over-optimization (by me, looks like :-() broke the case of recognizing
a word boundary just before a quoted identifier. Reported and diagnosed
by Dean Rasheed.
Some of these are newly added, some are older and were forgotten, some
don't contain any translatable strings right now but look like they
could in the future.
Some Windows-only messages had apparently been forgotten so far.
Also make the wording of the messages more consistent with similar
messages other parts, such as pg_ctl and pg_regress.
Initialise ckptXidEpoch from starting checkpoint and maintain the correct
value as we roll forwards. This allows GetNextXidAndEpoch() to return the
correct epoch when executed during recovery. Backpatch to 9.0 when the
problem is first observable by a user.
Bug report from Daniel Farina
Postmaster sets max_safe_fds by testing how many open file descriptors it
can open, and that is normally inherited by all child processes at fork().
Not so on EXEC_BACKEND, ie. Windows, however. Because of that, we
effectively ignored max_files_per_process on Windows, and always assumed
a conservative default of 32 simultaneous open files. That could have an
impact on performance, if you need to access a lot of different files
in a query. After this patch, the value is passed to child processes by
save/restore_backend_variables() among many other global variables.
It has been like this forever, but given the lack of complaints about it,
I'm not backpatching this.
Generally, the parse location assigned to a multiple-token construct is
the location of its leftmost token. This commit breaks that rule for
the syntaxes TYPENAME 'LITERAL' and CAST(CONSTANT AS TYPENAME) --- the
resulting Const will have the location of the literal string, not the
typename or CAST keyword. The cases where this matters are pretty thin on
the ground (no error messages in the regression tests change, for example),
and it's unlikely that any user would be confused anyway by an error cursor
pointing at the literal. But still it's less than consistent. The reason
for changing it is that contrib/pg_stat_statements wants to know the parse
location of the original literal, and it was agreed that this is the least
unpleasant way to preserve that information through parse analysis.
Peter Geoghegan
Add a queryId field to Query and PlannedStmt. This is not used by the
core backend, except for being copied around at appropriate times.
It's meant to allow plug-ins to track a particular query forward from
parse analysis to execution.
The queryId is intentionally not dumped into stored rules (and hence this
commit doesn't bump catversion). You could argue that choice either way,
but it seems better that stored rule strings not have any dependency
on plug-ins that might or might not be present.
Also, add a post_parse_analyze_hook that gets invoked at the end of
parse analysis (but only for top-level analysis of complete queries,
not cases such as analyzing a domain's default-value expression).
This is mainly meant to be used to compute and assign a queryId,
but it could have other applications.
Peter Geoghegan
Currently, the only way to see the numbers this gathers is via
EXPLAIN (ANALYZE, BUFFERS), but the plan is to add visibility through
the stats collector and pg_stat_statements in subsequent patches.
Ants Aasma, reviewed by Greg Smith, with some further changes by me.
It used to be case that lazy vacuum could call this function with only
a shared lock on the buffer, but neither lazy vacuum nor any other
code path does that any more. Simplify the code accordingly and clean
up some related, obsolete comments.
The COPY documentation says "COPY FROM matches the input against the null
string before removing backslashes". It is therefore reasonable to presume
that null markers like E'\\0' will work ... and they did, until someone put
the tests in the wrong order during microoptimization-driven rewrites.
Since then, we've been failing if the null marker is something that would
de-escape to an invalidly-encoded string. Since null markers generally
need to be something that can't appear in the data, this represents a
nontrivial loss of functionality; surprising nobody noticed it earlier.
Per report from Jeff Davis. Backpatch to 8.4 where this got broken.
setlocale() accepts locale name "" as meaning "the locale specified by the
process's environment variables". Historically we've accepted that for
Postgres' locale settings, too. However, it's fairly unsafe to store an
empty string in a new database's pg_database.datcollate or datctype fields,
because then the interpretation could vary across postmaster restarts,
possibly resulting in index corruption and other unpleasantness.
Instead, we should expand "" to whatever it means at the moment of calling
CREATE DATABASE, which we can do by saving the value returned by
setlocale().
For consistency, make initdb set up the initial lc_xxx parameter values the
same way. initdb was already doing the right thing for empty locale names,
but it did not replace non-empty names with setlocale results. On a
platform where setlocale chooses to canonicalize the spellings of locale
names, this would result in annoying inconsistency. (It seems that popular
implementations of setlocale don't do such canonicalization, which is a
pity, but the POSIX spec certainly allows it to be done.) The same risk
of inconsistency leads me to not venture back-patching this, although it
could certainly be seen as a longstanding bug.
Per report from Jeff Davis, though this is not his proposed patch.
For some reason, in the original coding of the PlaceHolderVar mechanism
I had supposed that PlaceHolderVars couldn't propagate into subqueries.
That is of course entirely possible. When it happens, we need to treat
an outer-level PlaceHolderVar much like an outer Var or Aggref, that is
SS_replace_correlation_vars() needs to replace the PlaceHolderVar with
a Param, and then when building the finished SubPlan we have to provide
the PlaceHolderVar expression as an actual parameter for the SubPlan.
The handling of the contained expression is a bit delicate but it can be
treated exactly like an Aggref's expression.
In addition to the missing logic in subselect.c, prepjointree.c was failing
to search subqueries for PlaceHolderVars that need their relids adjusted
during subquery pullup. It looks like everyplace else that touches
PlaceHolderVars got it right, though.
Per report from Mark Murawski. In 9.1 and HEAD, queries affected by this
oversight would fail with "ERROR: Upper-level PlaceHolderVar found where
not expected". But in 9.0 and 8.4, you'd silently get possibly-wrong
answers, since the value transmitted into the subquery wouldn't go to null
when it should.
We were doing the recursive simplification of function/operator arguments
in half a dozen different places, with rather baroque logic to ensure it
didn't get done multiple times on some arguments. This patch improves that
by postponing argument simplification until after we've dealt with named
parameters and added any needed default expressions.
Marti Raudsepp, somewhat hacked on by me
Fix loss of previous expression-simplification work when a transform
function fires: we must not simply revert to untransformed input tree.
Instead build a dummy FuncExpr node to pass to the transform function.
This has the additional advantage of providing a simpler, more uniform
API for transform functions.
Move documentation to a somewhat less buried spot, relocate some
poorly-placed code, be more wary of null constants and invalid typmod
values, add an opr_sanity check on protransform function signatures,
and some other minor cosmetic adjustments.
Note: although this patch touches pg_proc.h, no need for catversion
bump, because the changes are cosmetic and don't actually change the
intended catalog contents.
An incorrect and entirely unnecessary "safety check" in exec_stmt_getdiag()
caused the code to treat an assignment to a variable with dno zero as a
no-op. Unfortunately, that's a perfectly valid dno. This has been broken
since GET DIAGNOSTICS was invented. It's not terribly surprising that the
bug went unnoticed for so long, since in most cases you probably wouldn't
use the function's first-created variable (normally its first parameter)
as a GET DIAGNOSTICS target. Nonetheless, it's broken. Per bug #6551
from Adam Buraczewski.
Per a suggestion from Euler Taveira, it seems like a good idea to include
this information in \du (and \dg) output. This costs nothing for people
who are not using the VALID UNTIL feature, while for those who are, it's
rather critical information.
Fabrízio de Royes Mello
For those variables only used when asserts are enabled, use a new
macro PG_USED_FOR_ASSERTS_ONLY, which expands to
__attribute__((unused)) when asserts are not enabled.
This restores the pre-9.0 situation that it's possible to add new indexes
on pg_class and other mapped-but-not-shared catalogs, so long as you broke
the glass and flipped the big red Dont-Touch-Me switch. As before, there
are a lot of gotchas, and you'd have to be pretty desperate to try this
on a production database; but there doesn't seem to be a reason for
relmapper.c to be preventing such things all by itself. Per
experimentation with a case suggested by Cody Cutrer.
The prior coding instructs the user to pick an alternative maintenance
database, but this is overly clever, since it obscures whatever the real
cause of the failure is.
Josh Kupershmidt
I broke this in commit 337b6f5ecf, which
among other things arranged for quicksorts to CHECK_FOR_INTERRUPTS()
slightly less frequently. Sadly, it also arranged for heapsorts to
CHECK_FOR_INTERRUPTS() much less frequently. Repair.
The old code was using exit_horribly or die_horribly other depending on
whether it had an ArchiveHandle on which to close the connection or not;
but there were places that were passing a NULL ArchiveHandle to
die_horribly, and other places that used exit_horribly while having an
AH available. So there wasn't all that much consistency.
Improve the situation by keeping only one of the routines, and instead
of having to pass the AH down from the caller, arrange for it to be
present for an on_exit_nicely callback to operate on.
Author: Joachim Wieland
Some tweaks by me
Per a suggestion from Robert Haas, in the ongoing "parallel pg_dump"
saga.
This was for demonstration only, and now it was creating compiler
warnings from zlib without an obvious fix (see also
d923125b77), let's just remove it. The
"directory" format is presumably similar enough anyway.
Making this operation look like a utility statement seems generally a good
idea, and particularly so in light of the desire to provide command
triggers for utility statements. The original choice of representing it as
SELECT with an IntoClause appendage had metastasized into rather a lot of
places, unfortunately, so that this patch is a great deal more complicated
than one might at first expect.
In particular, keeping EXPLAIN working for SELECT INTO and CREATE TABLE AS
subcommands required restructuring some EXPLAIN-related APIs. Add-on code
that calls ExplainOnePlan or ExplainOneUtility, or uses
ExplainOneQuery_hook, will need adjustment.
Also, the cases PREPARE ... SELECT INTO and CREATE RULE ... SELECT INTO,
which formerly were accepted though undocumented, are no longer accepted.
The PREPARE case can be replaced with use of CREATE TABLE AS EXECUTE.
The CREATE RULE case doesn't seem to have much real-world use (since the
rule would work only once before failing with "table already exists"),
so we'll not bother with that one.
Both SELECT INTO and CREATE TABLE AS still return a command tag of
"SELECT nnnn". There was some discussion of returning "CREATE TABLE nnnn",
but for the moment backwards compatibility wins the day.
Andres Freund and Tom Lane
Failing to do so causes trigger invocation to fail when they are nested
within a function invocation that changes the current package.
Backpatch to 9.1; previous releases used a different method to obtain
_TD. Per bug report from Mark Murawski (bug #6511)
Author: Alex Hunsaker
When converting source files, pg_regress' inputdir and outputdir options were
ignored when computing the locations of the destination files. In consequence,
these options were effectively unusable when the regression inputs need to
be adjusted by pg_regress. This patch makes pg_regress put the converted files
in the same place that these options specify non-converted input or results
files are to be found. Backpatched to all live branches.
When using connection info arrays with a conninfo string in the dbname
slot, some memory would be leaked if an error occurred while
processing the following array slots.
found by Coverity
For a little while there I thought match_pathkeys_to_index() was broken
because it wasn't trying to match index columns to pathkeys in order.
Actually that's correct, because GiST can support ordering operators
on any random collection of index columns, but it sure needs a comment.
In commit 57664ed25e I tried to fix a bug
reported by Teodor Sigaev by making non-simple-Var output columns distinct
(by wrapping their expressions with dummy PlaceHolderVar nodes). This did
not work too well. Commit b28ffd0fcc fixed
some ensuing problems with matching to child indexes, but per a recent
report from Claus Stadler, constraint exclusion of UNION ALL subqueries was
still broken, because constant-simplification didn't handle the injected
PlaceHolderVars well either. On reflection, the original patch was quite
misguided: there is no reason to expect that EquivalenceClass child members
will be distinct. So instead of trying to make them so, we should ensure
that we can cope with the situation when they're not.
Accordingly, this patch reverts the code changes in the above-mentioned
commits (though the regression test cases they added stay). Instead, I've
added assorted defenses to make sure that duplicate EC child members don't
cause any problems. Teodor's original problem ("MergeAppend child's
targetlist doesn't match MergeAppend") is addressed more directly by
revising prepare_sort_from_pathkeys to let the parent MergeAppend's sort
list guide creation of each child's sort list.
In passing, get rid of add_sort_column; as far as I can tell, testing for
duplicate sort keys at this stage is dead code. Certainly it doesn't
trigger often enough to be worth expending cycles on in ordinary queries.
And keeping the test would've greatly complicated the new logic in
prepare_sort_from_pathkeys, because comparing pathkey list entries against
a previous output array requires that we not skip any entries in the list.
Back-patch to 9.1, like the previous patches. The only known issue in
this area that wasn't caused by the ill-advised previous patches was the
MergeAppend planning failure, which of course is not relevant before 9.1.
It's possible that we need some of the new defenses against duplicate child
EC entries in older branches, but until there's some clear evidence of that
I'm going to refrain from back-patching further.
This is for tools such as Coverity that don't know that the grammar
enforces that the case of not having a relation (but instead a query)
cannot happen in the FROM case.
Although we often don't care about freeing all memory in pg_dump,
these functions already freed the same memory in other code paths, so
we might as well do it consistently.
found by Coverity
Dave Malcolm of Red Hat is working on a static code analysis tool for
Python-related C code. It reported a number of problems in plpython,
most of which were failures to check for NULL results from object-creation
functions, so would only be an issue in very-low-memory situations.
Patch in HEAD and 9.1. We could go further back but it's not clear that
these issues are important enough to justify the work.
Jan Urbański
This replaces the former global variable PLy_curr_procedure, and provides
a place to stash per-call-level information. In particular we create a
per-call-level scratch memory context.
For the moment, the scratch context is just used to avoid leaking memory
from datatype output function calls in PLyDict_FromTuple. There probably
will be more use-cases in future.
Although this is a fix for a pre-existing memory leakage bug, it seems
sufficiently invasive to not want to back-patch; it feels better as part
of the major rearrangement of plpython code that we've already done as
part of 9.2.
Jan Urbański
A leaf tuple that we need to delete could get moved as a consequence of an
insertion happening concurrently with the VACUUM scan. If it moves from a
page past the current scan point to a page before, we'll miss it, which is
not acceptable. Hence, when we see a leaf-page REDIRECT that could have
been made since our scan started, chase down the redirection pointer much
as if we were doing a normal index search, and be sure to vacuum every page
it leads to. This fixes the issue because, if the tuple was on page N at
the instant we start our scan, we will surely find it as a consequence of
chasing the redirect from page N, no matter how much it moves around in
between. Problem noted by Takashi Yamamoto.
We have always created a whole-table dependency for the target relation,
but that's not really good enough, as it doesn't prevent scenarios such
as dropping an individual target column or altering its type. So we
have to create an individual dependency for each target column, as well.
Per report from Bill MacArthur of a rule containing UPDATE breaking
after such an alteration. Note that this patch doesn't try to make
such cases work, only to ensure that the attempted ALTER TABLE throws
an error telling you it can't cope with adjusting the rule.
This is a long-standing bug, but given the lack of prior reports
I'm not going to risk back-patching it. A back-patch wouldn't do
anything to fix existing rules' dependency lists, anyway.
This patch fixes the other major compatibility-breaking limitation of
SPGiST, that it didn't store anything for null values of the indexed
column, and so could not support whole-index scans or "x IS NULL"
tests. The approach is to create a wholly separate search tree for
the null entries, and use fixed "allTheSame" insertion and search
rules when processing this tree, instead of calling the index opclass
methods. This way the opclass methods do not need to worry about
dealing with nulls.
Catversion bump is for pg_am updates as well as the change in on-disk
format of SPGiST indexes; there are some tweaks in SPGiST WAL records
as well.
Heavily rewritten version of a patch by Oleg Bartunov and Teodor Sigaev.
(The original also stored nulls separately, but it reused GIN code to do
so; which required undesirable compromises in the on-disk format, and
would likely lead to bugs due to the GIN code being required to work in
two very different contexts.)
It now prints the argument that was at fault.
Also fix a small misbehavior where the error message issued by
getopt() would complain about a program named "--single", because
that's what argv[0] is in the server process.
The original API definition was incapable of supporting whole-index scans
because there was no way to invoke leaf-value reconstruction without
checking any qual conditions. Also, it was inefficient for
multiple-qual-condition scans because value reconstruction got done over
again for each qual condition, and because other internal work in the
consistent functions likewise had to be done for each qual. To fix these
issues, pass the whole scankey array to the opclass consistent functions,
instead of only letting them see one item at a time. (Essentially, the
loop over scankey entries is now inside the consistent functions not
outside them. This makes the consistent functions a bit more complicated,
but not unreasonably so.)
In itself this commit does nothing except save a few cycles in
multiple-qual-condition index scans, since we can't support whole-index
scans on SPGiST indexes until nulls are included in the index. However,
I consider this a must-fix for 9.2 because once we release it will get
very much harder to change the opclass API definition.
This allows loadable modules to get control at drop time, perhaps for the
purpose of performing additional security checks or to log the event.
The initial purpose of this code is to support sepgsql, but other
applications should be possible as well.
KaiGai Kohei, reviewed by me.
Further reflection shows that a single callback isn't very workable if we
desire to let FDWs generate multiple Paths, because that forces the FDW to
do all work necessary to generate a valid Plan node for each Path. Instead
split the former PlanForeignScan API into three steps: GetForeignRelSize,
GetForeignPaths, GetForeignPlan. We had already bit the bullet of breaking
the 9.1 FDW API for 9.2, so this shouldn't cause very much additional pain,
and it's substantially more flexible for complex FDWs.
Add an fdw_private field to RelOptInfo so that the new functions can save
state there rather than possibly having to recalculate information two or
three times.
In addition, we'd not thought through what would be needed to allow an FDW
to set up subexpressions of its choice for runtime execution. We could
treat ForeignScan.fdw_private as an executable expression but that seems
likely to break existing FDWs unnecessarily (in particular, it would
restrict the set of node types allowable in fdw_private to those supported
by expression_tree_walker). Instead, invent a separate field fdw_exprs
which will receive the postprocessing appropriate for expression trees.
(One field is enough since it can be a list of expressions; also, we assume
the corresponding expression state tree(s) will be held within fdw_state,
so we don't need to add anything to ForeignScanState.)
Per review of Hanada Shigeru's pgsql_fdw patch. We may need to tweak this
further as we continue to work on that patch, but to me it feels a lot
closer to being right now.
Phil Sorber reported that a rewriting ALTER TABLE within an extension
update script failed, because it creates and then drops a placeholder
table; the drop was being disallowed because the table was marked as an
extension member. We could hack that specific case but it seems likely
that there might be related cases now or in the future, so the most
practical solution seems to be to create an exception to the general rule
that extension member objects can only be dropped by dropping the owning
extension. To wit: if the DROP is issued within the extension's own
creation or update scripts, we'll allow it, implicitly performing an
"ALTER EXTENSION DROP object" first. This will simplify cases such as
extension downgrade scripts anyway.
No docs change since we don't seem to have documented the idea that you
would need ALTER EXTENSION DROP for such an action to begin with.
Also, arrange for explicitly temporary tables to not get linked as
extension members in the first place, and the same for the magic
pg_temp_nnn schemas that are created to hold them. This prevents assorted
unpleasant results if an extension script creates a temp table: the forced
drop at session end would either fail or remove the entire extension, and
neither of those outcomes is desirable. Note that this doesn't fix the
ALTER TABLE scenario, since the placeholder table is not temp (unless the
table being rewritten is).
Back-patch to 9.1.
In constructs such as "x IN (1,2,3,4)" and "x <> ALL(ARRAY[1,2,3,4])",
we formerly always used a general-purpose assumption that the probability
of success is independent for each comparison of "x" to an array element.
But in real-world usage of these constructs, that's a pretty poor
assumption; it's much saner to assume that the array elements are distinct
and so the match probabilities are disjoint. Apply that assumption if the
operator appears to behave as equality (for ANY) or inequality (for ALL).
But fall back to the normal independent-probabilities calculation if this
yields an impossible result, ie probability > 1 or < 0. We could protect
ourselves against bad estimates even more by explicitly checking for equal
array elements, but that is expensive and doesn't seem worthwhile: doing
it would amount to optimizing for poorly-written queries at the expense
of well-written ones.
Daniele Varrazzo and Tom Lane, after a suggestion by Ants Aasma
Multi-line "Inherits:" and "Child tables:" footers were misindented when
those strings' translations involved multibyte characters, because we were
using strlen() instead of an appropriate display width measurement.
In passing, avoid doing gettext() more than once per loop in these places.
While at it, fix pg_wcswidth(), which has been entirely broken since about
8.2, but fortunately has been unused for the same length of time.
Report and patch by Sergey Burladyan (bug #6480)
GetForeignColumnOptions provides some abstraction for accessing
column-specific FDW options, on a par with the access functions that were
already provided here for other FDW-related information.
Adjust file_fdw.c to use GetForeignColumnOptions instead of equivalent
hand-rolled code.
In addition, add some SGML documentation for the functions exported by
foreign.c that are meant for use by FDW authors.
(This is the fdw_helper portion of the proposed pgsql_fdw patch.)
Hanada Shigeru, reviewed by KaiGai Kohei
Due to an apparent thinko, when printing a table in expanded mode
(\x), space would be allocated for 1 slot plus 1 byte per line,
instead of 1 slot per line plus 1 slot for the NULL terminator. When
the line count is small, reading or writing the terminator would
therefore access memory beyond what was allocated.
Now that cache invalidation callbacks get only a hash value, and not a
tuple TID (per commits 632ae6829f and
b5282aa893), the only way they can restrict
what they invalidate is to know what the hash values mean. setrefs.c was
doing this via a hard-wired assumption but that seems pretty grotty, and
it'll only get worse as more cases come up. So let's expose a calculation
function that takes the same parameters as SearchSysCache. Per complaint
from Marko Kreen.
Use-cases for this include custom log filtering rules and custom log
message transmission mechanisms (for instance, lossy log message
collection, which has been discussed several times recently).
As is our common practice for hooks, there's no regression test nor
user-facing documentation for this, though the author did exhibit a
sample module using the hook.
Martin Pihlak, reviewed by Marti Raudsepp
This simplifies the code a little bit. The new rule is that to update
XLogCtl->LogwrtResult, you must hold both WALWriteLock and info_lck, whereas
before we had two copies, one that was protected by WALWriteLock and another
protected by info_lck. The code that updates them was already holding both
locks, so merging the two is trivial.
The third copy, XLogCtl->Insert.LogwrtResult, was not totally redundant, it
was used in AdvanceXLInsertBuffer to update the backend-local copy, before
acquiring the info_lck to read the up-to-date value. But the value of that
seems dubious; at best it's saving one spinlock acquisition per completed
WAL page, which is not significant compared to all the other work involved.
And in practice, it's probably not saving even that much.
It's harmless to do full page writes even when not strictly necessary, so
when turning full_page_writes on, we can set the global flag first, and then
call XLogInsert. Likewise, when turning it off, we can write the WAL record
first, and then clear the flag. This way XLogInsert doesn't need any special
handling of the XLOG_FPW_CHANGE record type. XLogInsert is complicated
enough already, so anything we can keep away from there is a good thing.
Actually I don't think the atomicity of the shared memory flag matters,
anyway, because we only write the XLOG_FPW_CHANGE at the end of recovery,
when there are no concurrent WAL insertions going on. But might as well make
it safe, in case we allow changing full_page_writes on the fly in the
future.
The original API specification only allowed an FDW to create a single
access path, which doesn't seem like a terribly good idea in hindsight.
Instead, move the responsibility for building the Path node and calling
add_path() into the FDW's PlanForeignScan function. Now, it can do that
more than once if appropriate. There is no longer any need for the
transient FdwPlan struct, so get rid of that.
Etsuro Fujita, Shigeru Hanada, Tom Lane
This patch installs significantly smarter penalty and picksplit functions
for ranges, making GiST indexes for them smaller and faster to search.
There is no on-disk format change, so no catversion bump, but you'd need
to REINDEX to get the benefits for any existing index.
Alexander Korotkov, reviewed by Jeff Davis
The code in this function that tried to cope with a missing count histogram
was quite ineffective for anything except a perfectly flat distribution.
Furthermore, since we were already punting for missing MCELEM slot, it's
rather useless to sweat over missing DECHIST: there are no cases where
ANALYZE will create the first but not the second. So just simplify the
code by punting rather than pretending we can do something useful.
Do "frac" arithmetic in int64 to prevent overflow with large statistics
targets, and improve the comments so people have some chance of
understanding how it works.
Alexander Korotkov and Tom Lane
Now that we have validate_xlog_location, call it from the previously
existing functions taking xlog locatoins as a string input.
Suggested by Fujii Masao
Comparing two xlog locations are useful for example when calculating
replication lag.
Euler Taveira de Oliveira, reviewed by Fujii Masao, and some cleanups
from me
This patch improves selectivity estimation for the array <@, &&, and @>
(containment and overlaps) operators. It enables collection of statistics
about individual array element values by ANALYZE, and introduces
operator-specific estimators that use these stats. In addition,
ScalarArrayOpExpr constructs of the forms "const = ANY/ALL (array_column)"
and "const <> ANY/ALL (array_column)" are estimated by treating them as
variants of the containment operators.
Since we still collect scalar-style stats about the array values as a
whole, the pg_stats view is expanded to show both these stats and the
array-style stats in separate columns. This creates an incompatible change
in how stats for tsvector columns are displayed in pg_stats: the stats
about lexemes are now displayed in the array-related columns instead of the
original scalar-related columns.
There are a few loose ends here, notably that it'd be nice to be able to
suppress either the scalar-style stats or the array-element stats for
columns for which they're not useful. But the patch is in good enough
shape to commit for wider testing.
Alexander Korotkov, reviewed by Noah Misch and Nathan Boley
The only reason this didn't work before was that parserOpenTable()
rejects composite types. So use relation_openrv() directly and
manually do the errposition() setup that parserOpenTable() does.
gzFile is already a pointer, so code like
gzFile *handle = gzopen(...)
is wrong.
This used to pass silently because gzFile used to be defined as void*,
and you can assign a void* to a void**. But somewhere between zlib
versions 1.2.3.4 and 1.2.6, the definition of gzFile was changed to
struct gzFile_s *, and with that new definition this usage causes
compiler warnings.
So remove all those extra pointer decorations.
There is a related issue in pg_backup_archiver.h, where
FILE *FH; /* General purpose file handle */
is used throughout pg_dump as sometimes a real FILE* and sometimes a
gzFile handle, which also causes warnings now. This is not yet fixed
here, because it might need more code restructuring.
This effectively reverts 7886cc73ad,
which was done under the impression that isolationtester needs libpq,
which it no longer does (and never really did).
This fixes an oversight in commit 11cad29c91,
which introduced MergeAppend plans. Before that happened, we never
particularly cared about the sort ordering of scans of inheritance child
relations, since appending their outputs together would destroy any
ordering anyway. But now it's important to be able to match child relation
sort orderings to those of the surrounding query. The original coding of
add_child_rel_equivalences skipped ec_has_const EquivalenceClasses, on the
originally-correct grounds that adding child expressions to them was
useless. The effect of this is that when a parent variable is equated to
a constant, we can't recognize that index columns on the equivalent child
variables are not sort-significant; that is, we can't recognize that a
child index on, say, (x, y) is able to generate output in "ORDER BY y"
order when there is a clause "WHERE x = constant". Adding child
expressions to the (x, constant) EquivalenceClass fixes this, without any
downside that I can see other than a few more planner cycles expended on
such queries.
Per recent gripe from Robert McGehee. Back-patch to 9.1 where MergeAppend
was introduced.
Previously it was thought that it's impossible as the code stands, because
insertions create buffers as tuples are cascaded downwards, and index
split also creaters buffers eagerly for all halves. But the example from
Jay Levitt demonstrates that it can happen, when the root page is split.
It's in fact OK if the buffer doesn't exist, so we just need to remove the
sanity check. In fact, we've been discussing the possibility of destroying
empty buffers to conserve memory, which would render the sanity check
completely useless anyway.
Fix by Alexander Korotkov
It's not necessary and can only create confusion about which libpq
installation should be used.
Also remove some dead code from the makefile that was apparently
copied from elsewhere.
Running "psql -f -" used to print
psql:<stdin>:1: ERROR: blah
but that got broken between 8.4 and 9.0 (commit
b291c0fba8), and now it printed
psql:-:1: ERROR: blah
This reverts to the old behavior and cleans up some code that was left
dead or useless by the mentioned commit.
The only toastable column now is datacl, but we don't really support
long ACLs anyway. The TOAST table should have been removed when the
pg_db_role_setting catalog was introduced in commit
2eda8dfb52, but I forgot to do that.
Per -hackers discussion on March 2011.
A prepared transaction can get new conflicts in and out after preparing, so
we cannot rely on the in- and out-flags stored in the statefile at prepare-
time. As a quick fix, make the conservative assumption that after a restart,
all prepared transactions are considered to have both in- and out-conflicts.
That can lead to unnecessary rollbacks after a crash, but that shouldn't be
a big problem in practice; you don't want prepared transactions to hang
around for a long time anyway.
Dan Ports
This makes it much more convenient to build tools for Postgres that are
separately compiled and require a matching CRC implementation.
To prevent multiple copies of the CRC polynomial tables being introduced
into the postgres binaries, they are now included in the static library
libpgport that is mainly meant for replacement system functions. That
seems like a bit of a kludge, but there's no better place.
This cleans up building of the tools pg_controldata and pg_resetxlog,
which previously had to build their own copies of pg_crc.o.
In the future, external programs that need access to the CRC tables can
include the tables directly from the new header file pg_crc_tables.h.
Daniel Farina, reviewed by Abhijit Menon-Sen and Tom Lane
We don't need to constrain the other side of an indexable join clause to
not be below an outer join; an example here is
SELECT FROM t1 LEFT JOIN t2 ON t1.a = t2.b LEFT JOIN t3 ON t2.c = t3.d;
We can consider an inner indexscan on t3.d using c = d as indexqual, even
though t2.c is potentially nulled by a previous outer join. The comparable
logic in orindxpath.c has always worked that way, but I was being overly
cautious here.
psql backslash commands that deal with file or directory names require
quotes around those that have spaces, single quotes, or backslashes.
However, tab-completing such names does not provide said quotes, and is
thus almost useless with them.
This patch fixes the problem by having a wrapper function around
rl_filename_completion_function that dequotes on input and quotes on
output. This eases dealing with such names.
Author: Noah Misch
We already skip rewriting the table in these cases, but we still force a
whole table scan to validate the data. This can be skipped, and thus
we can make the whole ALTER TABLE operation just do some catalog touches
instead of scanning the table, when these two conditions hold:
(a) Old and new pg_constraint.conpfeqop match exactly. This is actually
stronger than needed; we could loosen things by way of operator
families, but it'd require a lot more effort.
(b) The functions, if any, implementing a cast from the foreign type to
the primary opcintype are the same. For this purpose, we can consider a
binary coercion equivalent to an exact type match. When the opcintype
is polymorphic, require that the old and new foreign types match
exactly. (Since ri_triggers.c does use the executor, the stronger check
for polymorphic types is no mere future-proofing. However, no core type
exercises its necessity.)
Author: Noah Misch
Committer's note: catalog version bumped due to change of the Constraint
node. I can't actually find any way to have such a node in a stored
rule, but given that we have "out" support for them, better be safe.
In commit 4016bdef8a I fixed a bunch of
ginxlog.c bugs having to do with not handling XLogReadBuffer failures
correctly. However, in ginRedoUpdateMetapage and ginRedoDeleteListPages,
I unaccountably thought that failure to read the metapage would be
impossible and just put in an elog(PANIC) call. This is of course wrong:
failure is exactly what will happen if the index got dropped (or rebuilt)
between creation of the WAL record and the crash we're trying to recover
from. I believe this explains Nicholas Wilson's recent report of these
errors getting reached.
Also, fix memory leak in forgetIncompleteSplit. This wasn't of much
concern when the code was written, but in a long-running standby server
page split records could be expected to accumulate indefinitely.
Back-patch to 8.4 --- before that, GIN didn't have a metapage.
Claiming that the typevar argument to DefineCompositeType() is const
was a plain lie. A similar case in DefineVirtualRelation() was
already changed in passing in commit 1575fbcb. Also clean up the now
unnecessary casts that used to cast away the const.
The "uncomplicated" case isn't materially less complicated than the full
case, certainly not enough so to justify duplicating nearly 500 lines
of code. The only extra work being done in the full path is zaptreesubs,
which is very cheap compared to everything else being done here, and
besides that I'm less than convinced that it's not needed in some cases
even without backrefs.
In nested sub-regex trees, lower-level nodes created DFAs and then
destroyed them again before exiting, which is a bit dumb considering that
the recursive search is likely to call those nodes again later. Instead
cache each created DFA until the end of pg_regexec(). This is basically a
space for time tradeoff, in that it might increase the maximum memory
usage. However, in most regex patterns there are not all that many subre
nodes, so not that many DFAs --- and in any case, the peak usage occurs
when reaching the bottom recursion level, and except for alternation cases
that's going to be the same anyway.
Apparently some primordial version of Spencer's engine needed cdissect()
and child functions to be able to continue matching from a previous
position when re-called. That is dead code, though, since trivial
inspection shows that cdissect can never be entered without having
previously done zapmem which resets the relevant retry counter. I have
also verified experimentally that no case in the Tcl regression tests
reaches cdissect with a nonzero retry value. Accordingly, remove that
logic. This doesn't really save any noticeable number of cycles in itself,
but it is one step towards making dissect() and cdissect() equivalent,
which will allow removing hundreds of lines of near-duplicated code.
Since struct subre's "retry" field is no longer particularly related to
any kind of retry, rename it to "id". As of this commit it's only used
for identifying a subre node in debug printouts, so you might think we
should get rid of the field entirely; but I have a plan for another use.
Cases where a back-reference is part of a larger subexpression that
is quantified have never worked in Spencer's regex engine, because
he used a compile-time transformation that neglected the need to
check the back-reference match in iterations before the last one.
(That was okay for capturing parens, and we still do it if the
regex has *only* capturing parens ... but it's not okay for backrefs.)
To make this work properly, we have to add an "iteration" node type
to the regex engine's vocabulary of sub-regex nodes. Since this is a
moderately large change with a fair risk of introducing new bugs of its
own, apply to HEAD only, even though it's a fix for a longstanding bug.
pg_dump was incautious about sanitizing object names that are emitted
within SQL comments in its output script. A name containing a newline
would at least render the script syntactically incorrect. Maliciously
crafted object names could present a SQL injection risk when the script
is reloaded.
Reported by Heikki Linnakangas, patch by Robert Haas
Security: CVE-2012-0868
Both libpq and the backend would truncate a common name extracted from a
certificate at 32 bytes. Replace that fixed-size buffer with dynamically
allocated string so that there is no hard limit. While at it, remove the
code for extracting peer_dn, which we weren't using for anything; and
don't bother to store peer_cn longer than we need it in libpq.
This limit was not so terribly unreasonable when the code was written,
because we weren't using the result for anything critical, just logging it.
But now that there are options for checking the common name against the
server host name (in libpq) or using it as the user's name (in the server),
this could result in undesirable failures. In the worst case it even seems
possible to spoof a server name or user name, if the correct name is
exactly 32 bytes and the attacker can persuade a trusted CA to issue a
certificate in which that string is a prefix of the certificate's common
name. (To exploit this for a server name, he'd also have to send the
connection astray via phony DNS data or some such.) The case that this is
a realistic security threat is a bit thin, but nonetheless we'll treat it
as one.
Back-patch to 8.4. Older releases contain the faulty code, but it's not
a security problem because the common name wasn't used for anything
interesting.
Reported and patched by Heikki Linnakangas
Security: CVE-2012-0867
This check was overlooked when we added function execute permissions to the
system years ago. For an ordinary trigger function it's not a big deal,
since trigger functions execute with the permissions of the table owner,
so they couldn't do anything the user issuing the CREATE TRIGGER couldn't
have done anyway. However, if a trigger function is SECURITY DEFINER,
that is not the case. The lack of checking would allow another user to
install it on his own table and then invoke it with, essentially, forged
input data; which the trigger function is unlikely to realize, so it might
do something undesirable, for instance insert false entries in an audit log
table.
Reported by Dinesh Kumar, patch by Robert Haas
Security: CVE-2012-0866
In the Fedora variant of MinGW, the openssl libraries have their normal
names, not libeay32 and libssleay32. Adjust configure probes to allow
that, per bug #6486.
Tomasz Ostrowski
This allows changing the location of the files that were previously
hard-coded to server.crt, server.key, root.crt, root.crl.
server.crt and server.key continue to be the default settings and are
thus required to be present by default if SSL is enabled. But the
settings for the server-side CA and CRL are now empty by default, and
if they are set, the files are required to be present. This replaces
the previous behavior of ignoring the functionality if the files were
not found.
When "vacuuming" a single btree page by removing LP_DEAD tuples, we are not
actually within a vacuum operation, but rather in an ordinary insertion
process that could well be running concurrently with a vacuum. So clearing
the cycleid is incorrect, and could cause the concurrent vacuum to miss
removing tuples that it needs to remove. This is a longstanding bug
introduced by commit e6284649b9 of
2006-07-25. I believe it explains Maxim Boguk's recent report of index
corruption, and probably some other previously unexplained reports.
In 9.0 and up this is a one-line fix; before that we need to introduce a
flag to tell _bt_delitems what to do.
First, as noted by Itagaki Takahiro, a datum of type JSON doesn't
need to be escaped. Second, ensure that numeric output not in
the form of a legal JSON number is quoted and escaped.
The syntax "\n*", that is a backref with a * quantifier directly applied
to it, has never worked correctly in Spencer's library. This has been an
open bug in the Tcl bug tracker since 2005:
https://sourceforge.net/tracker/index.php?func=detail&aid=1115587&group_id=10894&atid=110894
The core of the problem is in parseqatom(), which first changes "\n*" to
"\n+|" and then applies repeat() to the NFA representing the backref atom.
repeat() thinks that any arc leading into its "rp" argument is part of the
sub-NFA to be repeated. Unfortunately, since parseqatom() already created
the arc that was intended to represent the empty bypass around "\n+", this
arc gets moved too, so that it now leads into the state loop created by
repeat(). Thus, what was supposed to be an "empty" bypass gets turned into
something that represents zero or more repetitions of the NFA representing
the backref atom. In the original example, in place of
^([bc])\1*$
we now have something that acts like
^([bc])(\1+|[bc]*)$
At runtime, the branch involving the actual backref fails, as it's supposed
to, but then the other branch succeeds anyway.
We could no doubt fix this by some rearrangement of the operations in
parseqatom(), but that code is plenty ugly already, and what's more the
whole business of converting "x*" to "x+|" probably needs to go away to fix
another problem I'll mention in a moment. Instead, this patch suppresses
the *-conversion when the target is a simple backref atom, leaving the case
of m == 0 to be handled at runtime. This makes the patch in regcomp.c a
one-liner, at the cost of having to tweak cbrdissect() a little. In the
event I went a bit further than that and rewrote cbrdissect() to check all
the string-length-related conditions before it starts comparing characters.
It seems a bit stupid to possibly iterate through many copies of an
n-character backreference, only to fail at the end because the target
string's length isn't a multiple of n --- we could have found that out
before starting. The existing coding could only be a win if integer
division is hugely expensive compared to character comparison, but I don't
know of any modern machine where that might be true.
This does not fix all the problems with quantified back-references. In
particular, the code is still broken for back-references that appear within
a larger expression that is quantified (so that direct insertion of the
quantification limits into the BACKREF node doesn't apply). I think fixing
that will take some major surgery on the NFA code, specifically introducing
an explicit iteration node type instead of trying to transform iteration
into concatenation of modified regexps.
Back-patch to all supported branches. In HEAD, also add a regression test
case for this. (It may seem a bit silly to create a regression test file
for just one test case; but I'm expecting that we will soon import a whole
bunch of regex regression tests from Tcl, so might as well create the
infrastructure now.)
While this doesn't save a huge amount of runtime, it still seems worth
doing, especially since I realized that the data copying I did in my first
draft was quite unnecessary. In this version, once we have the results
cached, getting them back for re-use is really very cheap.
Also, remove the hard-wired limitation to not consider wctype.h results for
character codes above 255. It turns out that we can't push the limit as
far up as I'd originally hoped, because the regex colormap code is not
efficient enough to cope very well with character classes containing many
thousand letters, which a Unicode locale is entirely capable of producing.
Still, we can push it up to U+7FF (which I chose as the limit of 2-byte
UTF8 characters), which will at least make Eastern Europeans happy pending
a better solution. Thus, this commit resolves the specific complaint in
bug #6457, but not the more general issue that letters of non-western
alphabets are mostly not recognized as matching [[:alpha:]].
Create src/backend/regex/README to hold an implementation overview of
the regex package, and fill it in with some preliminary notes about
the code's DFA/NFA processing and colormap management. Much more to
do there of course.
Also, improve some code comments around the colormap and cvec code.
No functional changes except to add one missing assert.
Some line feeds are added to target lists and from lists to make
them more readable. By default they wrap at 80 columns if possible,
but the wrap column is also selectable - if 0 it wraps after every
item.
Andrew Dunstan, reviewed by Hitoshi Harada.
Sync our regex code with upstream changes since last time we did this,
which was Tcl 8.5.0 (see commit df1e965e12).
There are no functional changes here; the main point is just to lay down
a commit-log marker that somebody has looked at this recently, and to do
what we can to keep the two codebases comparable.
Formerly, we just punted when trying to estimate stats for variables coming
out of sub-queries using DISTINCT, on the grounds that whatever stats we
might have for underlying table columns would be inapplicable. But if the
sub-query has only one DISTINCT column, we can consider its output variable
as being unique, which is useful information all by itself. The scope of
this improvement is pretty narrow, but it costs nearly nothing, so we might
as well do it. Per discussion with Andres Freund.
This patch differs from the draft I submitted yesterday in updating various
comments about vardata.isunique (to reflect its extended meaning) and in
tweaking the interaction with security_barrier views. There does not seem
to be a reason why we can't use this sort of knowledge even when the
sub-query is such a view.
Use exit_horribly() and ExecuteSqlQueryForSingleRow() in various
places where it's equivalent, or nearly equivalent, to the prior
coding. Apart from being more compact, this also makes the error
messages for the wrong-number-of-tuples case more consistent.
Parallel pg_dump wants to have multiple ArchiveHandle objects, and
therefore multiple PGconns, in play at the same time. This should
be just about the end of the refactoring that we need in order to
make that workable.
Any patches apt to get broken have probably already been broken by the
error-handling cleanups I just did, so we might as well clean this up
at the same time.
This extends the changes of commit 6252c4f9e2
so that we run the cleanup hook earlier for failure cases as well as
success cases. As before, the point is to avoid an assertion failure from
an Assert I added in commit a874fe7b4c, which
was meant to check that no user-written code can be called during portal
cleanup. This fixes a case reported by Pavan Deolasee in which the Assert
could be triggered during backend exit (see the new regression test case),
and also prevents the possibility that the cleanup hook is run after
portions of the portal's state have already been recycled. That doesn't
really matter in current usage, but it foreseeably could matter in the
future.
Back-patch to 9.1 where the Assert in question was added.
Per recent work by Peter Geoghegan, it's significantly faster to
tuplesort on a single sortkey if ApplySortComparator is inlined into
quicksort rather reached via a function pointer. It's also faster
in general to have a version of quicksort which is specialized for
sorting SortTuple objects rather than objects of arbitrary size and
type. This requires a couple of additional copies of the quicksort
logic, which in this patch are generate using a Perl script. There
might be some benefit in adding further specializations here too,
but thus far it's not clear that those gains are worth their weight
in code footprint.
The hstore and json datatypes both have record-conversion functions that
pay attention to column names in the composite values they're handed.
We used to not worry about inserting correct field names into tuple
descriptors generated at runtime, but given these examples it seems
useful to do so. Observe the nicer-looking results in the regression
tests whose results changed.
catversion bump because there is a subtle change in requirements for stored
rule parsetrees: RowExprs from ROW() constructs now have to include field
names.
Andrew Dunstan and Tom Lane
We don't normally allow quals to be pushed down into a view created
with the security_barrier option, but functions without side effects
are an exception: they're OK. This allows much better performance in
common cases, such as when using an equality operator (that might
even be indexable).
There is an outstanding issue here with the CREATE FUNCTION / ALTER
FUNCTION syntax: there's no way to use ALTER FUNCTION to unset the
leakproof flag. But I'm committing this as-is so that it doesn't
have to be rebased again; we can fix up the grammar in a future
commit.
KaiGai Kohei, with some wordsmithing by me.
If tuples were toasted, heap_multi_insert didn't update the ctid on the
original tuples. This caused a failure if there was an after trigger
(including a foreign key), on the table, and a tuple got toasted.
Per off-list report and test case from Ted Phelps
Datatype I/O functions are allowed to leak memory in CurrentMemoryContext,
since they are generally called in short-lived contexts. However, plpgsql
calls such functions for purposes of type conversion, and was calling them
in its procedure context. Therefore, any leaked memory would not be
recovered until the end of the plpgsql function. If such a conversion
was done within a loop, quite a bit of memory could get consumed. Fix by
calling such functions in the transient "eval_econtext", and adjust other
logic to match. Back-patch to all supported versions.
Andres Freund, Jan Urbański, Tom Lane
If an extension has not been selected to be dumped (perhaps because of
a --schema or --table switch), the contents of its configuration tables
surely should not get dumped either. Per gripe from
Hubert Depesz Lubaczewski.
In pre-7.3 databases, pg_attribute.attislocal doesn't exist. The easiest
way to make sure the new inheritance logic behaves sanely is to assume it's
TRUE, not FALSE. This will result in printing child columns even when
they're not really needed. We could work harder at trying to reconstruct a
value for attislocal, but there is little evidence that anyone still cares
about dumping from such old versions, so just do the minimum necessary to
have a valid dump.
I had this correct in the original draft of the patch, but for some
unaccountable reason decided it wasn't necessary to change the value.
Testing against an old server shows otherwise...
Revise pg_dump's handling of inherited columns, which was last looked at
seriously in 2001, to eliminate several misbehaviors associated with
inherited default expressions and NOT NULL flags. In particular make sure
that a column is printed in a child table's CREATE TABLE command if and
only if it has attislocal = true; the former behavior would sometimes cause
a column to become marked attislocal when it was not so marked in the
source database. Also, stop relying on textual comparison of default
expressions to decide if they're inherited; instead, don't use
default-expression inheritance at all, but just install the default
explicitly at each level of the hierarchy. This fixes the
search-path-related misbehavior recently exhibited by Chester Young, and
also removes some dubious assumptions about the order in which ALTER TABLE
SET DEFAULT commands would be executed.
Back-patch to all supported branches.
Per buildfarm, we sometimes get row-ordering variations in the output.
This also makes this query look more like numerous other ones in the same
test file.
Add new psql settings and command-line options to support setting the
field and record separators for unaligned output to a zero byte, for
easier interfacing with other shell tools.
reviewed by Abhijit Menon-Sen
It's not entirely evident how the logic here relates to the
interval_transform function, so let's clue people in that they need to
check that if the rules change.
These were added to kwlist.h as unreserved keywords in separate patches,
but authors forgot to add them to the corresponding list in gram.y.
Because of that, even though they were supposed to be unreserved keywords,
they could not be used as identifiers. src/tools/check_keywords.pl is your
friend.
Various filters that were meant to prevent dumping of table data were not
being applied to extension config tables, notably --exclude-table-data and
--no-unlogged-table-data. We also would bogusly try to dump data from
views, sequences, or foreign tables, should an extension try to claim they
were config tables. Fix all that, and refactor/redocument to try to make
this a bit less fragile. This reverts the implementation, though not the
feature, of commit 7b070e896c, which had
broken config-table dumping altogether :-(.
It is still the case that the code will dump config-table data even if
--schema is specified. That behavior was intentional, as per the comments
in getExtensionMembership, so I think it requires some more discussion
before we change it.
If somebody puts a window function in WHERE, we should complain about that
in so many words. The previous coding tended to complain about the window
function's arguments instead, which is likely to be misleading to users who
are unclear on the semantics of window functions; as seen for example in
bug #6440 from Matyas Novak.
Just another example of how "add new code at the end" is frequently a bad
heuristic.
Since bool_and() is equivalent to min(), and bool_or() to max(), we might
as well let them be index-optimized in the same way. The practical value
of this is debatable at best, but it seems nearly cost-free to enable it.
Code-wise, we need only adjust the entries in pg_aggregate. There is a
measurable planning speed penalty for a query involving one of these
aggregates, but it is only a few percent in simple cases, so that seems
acceptable.
Marti Raudsepp, reviewed by Abhijit Menon-Sen
When written, textanycat, anytextcat, quote_literal, and quote_nullable
were marked volatile, because they could invoke arbitrary type-specific
output functions as part of casting their anyelement arguments to text.
Since then, we have defined a project policy that I/O functions must not
be volatile, as per commit aab353a60b.
So these functions can safely be downgraded to stable. Most of the time
this makes no difference since they'll get inlined anyway, but as noted
by Andrew Dunstan, there are cases where the volatile marking prevents
optimizations that the planner does before function inlining. (I think
I might have overlooked these functions in the earlier commit on the
grounds that inlining would make it moot, but not so --- tgl)
This change results in a change in the expected output of the json
regression tests, because the planner can now flatten a sub-select
that it failed to before. The old output is preferable, but getting
that back will require some as-yet-unfinished work on RowExpr handling.
Marti Raudsepp
Use a target-specific variable to add to CPPFLAGS instead of writing a
custom .c -> .o rule. This will ensure that dependency tracking is
used when enabled.
The immediate impetus for this is that Noah Misch's patch to elide
unnecessary table and index rebuilds when changing typmod for temporal
types uses it; and this is extracted from that patch, with some
further commentary by me. But it seems logically separate from the
remainder of the patch, so I'm committing it separately; this is not
the first time someone has wanted fls() in the backend and probably
won't be the last.
If we end up using this in more performance-critical spots it may be
worthwhile to add some architecture-specific optimizations to our
src/port version of fls() - e.g. any x86 platform can implement this
using the assembly instruction BSRL. But performance won't matter
a bit for assessing typmod changes, so I'm not worried about that
right now.
This enables ALTER TABLE to skip table and index rebuilds when the
new type is unconstraint varbit, or when the allowable number of bits
is not decreasing.
Noah Misch, with review and a fix for an OID collision by me.
This enables ALTER TABLE to skip table and index rebuilds when a column
is changed to an unconstrained numeric, or when the scale is unchanged
and the precision does not decrease.
Noah Misch, with a few stylistic changes and a fix for an OID
collision by me.
Sometimes it may be useful to get actual row counts out of EXPLAIN
(ANALYZE) without paying the cost of timing every node entry/exit.
With this patch, you can say EXPLAIN (ANALYZE, TIMING OFF) to get that.
Tomas Vondra, reviewed by Eric Theise, with minor doc changes by me.
This is another round of refactoring to make things simpler for parallel
pg_dump. pg_dump.c now issues SQL queries through the relevant Archive
object, rather than relying on the global variable g_conn. This commit
isn't quite enough to get rid of g_conn entirely, but it makes a big
dent in its utilization and, along the way, manages to be slightly less
code than before.
Do not prompt when options were not specified. Assume --no-createdb,
--no-createrole, --no-superuser by default.
Also disable prompting for user name in dropdb, unless --interactive
was specified.
reviewed by Josh Kupershmidt
If LWLockWaitUntilFree was called before the first LWLockAcquire call, you
would either crash because of access to uninitialized array or account the
acquisition incorrectly. LWLockConditionalAcquire doesn't have this problem
because it doesn't update the lwlock stats.
In practice, this never happens because there is no codepath where you would
call LWLockWaitUntilfree before LWLockAcquire after a new process is
launched. But that's just accidental, there's no guarantee that that's
always going to be true in the future.
Spotted by Jeff Janes.
The postmaster was coded to treat any unexpected exit of the startup
process (i.e., the WAL replay process) as a catastrophic crash, and not try
to restart it. This was OK so long as the startup process could not have
any sibling postmaster children. However, if a hot-standby backend
crashes, we SIGQUIT the startup process along with everything else, and the
resulting exit is hardly "unexpected". Treating it as such meant we failed
to restart a standby server after any child crash at all, not only a crash
of the WAL replay process as intended. Adjust that. Back-patch to 9.0
where hot standby was introduced.
Although we will not even issue an XLOG_TBLSPC_DROP WAL record unless
removal of the tablespace's directories succeeds, that does not guarantee
that the same operation will succeed during WAL replay. Foreseeable
reasons for it to fail include temp files created in the tablespace by Hot
Standby backends, wrong directory permissions on a standby server, etc etc.
The original coding threw ERROR if replay failed to remove the directories,
but that is a serious overreaction. Throwing an error aborts recovery,
and worse means that manual intervention will be needed to get the database
to start again, since otherwise the same error will recur on subsequent
attempts to replay the same WAL record. And the consequence of failing to
remove the directories is only that some probably-small amount of disk
space is wasted, so it hardly seems justified to throw an error.
Accordingly, arrange to report such failures as LOG messages and keep going
when a failure occurs during replay.
Back-patch to 9.0 where Hot Standby was introduced. In principle such
problems can occur in earlier releases, but Hot Standby increases the odds
of trouble significantly. Given the lack of field reports of such issues,
I'm satisfied with patching back as far as the patch applies easily.
Instead, everything that needs the Archive object now gets it as a
parameter. This is necessary infrastructure for parallel pg_dump,
but is also amply justified by the ugliness of the current code
(though a lot more than this is needed to fix that problem).
Change various places in the code that are referencing the global
Archive object g_fout to instead reference the Archive object fout
which is already being passed as a parameter. For parallel pg_dump to
work, we're going to need multiple Archive(Handle) objects, so the
real solution here is to pass down the Archive object to everywhere
that it needs to go, but we might as well pick the low-hanging fruit
first.
Originally, most of this code assumed that no Postgres backends could be
running concurrently with it, and so no locking could be needed. That
assumption fails in Hot Standby. While it's still true that Hot Standby
backends should never change values like nextXid, they can examine them,
and consistency is important in some cases such as when computing a
snapshot. Therefore, prudence requires that WAL replay code obtain the
relevant locks when modifying such variables, even though it can examine
them without taking a lock. We were following that coding rule in some
places but not all. This commit applies the coding rule uniformly to all
updates of ShmemVariableCache and MultiXactState fields; a search of the
replay routines did not find any other cases that seemed to be at risk.
In addition, this commit fixes a longstanding thinko in replay of NEXTOID
and checkpoint records: we tried to advance nextOid only if it was behind
the value in the WAL record, but the comparison would draw the wrong
conclusion if OID wraparound had occurred since the previous value.
Better to just unconditionally assign the new value, since OID assignment
shouldn't be happening during replay anyway.
The additional locking seems to be more in the nature of future-proofing
than fixing any live bug, so I am not going to back-patch it. The NEXTOID
fix will be back-patched separately.
RestoreBkpBlocks was in the habit of zeroing and refilling the target
buffer; which was perfectly safe when the code was written, but is unsafe
during Hot Standby operation. The reason is that we have coding rules
that allow backends to continue accessing a tuple in a heap relation while
holding only a pin on its buffer. Such a backend could see transiently
zeroed data, if WAL replay had occasion to change other data on the page.
This has been shown to be the cause of bug #6425 from Duncan Rance (who
deserves kudos for developing a sufficiently-reproducible test case) as
well as Bridget Frey's re-report of bug #6200. It most likely explains the
original report as well, though we don't yet have confirmation of that.
To fix, change the code so that only bytes that are supposed to change will
change, even transiently. This actually saves cycles in RestoreBkpBlocks,
since it's not writing the same bytes twice.
Also fix seq_redo, which has the same disease, though it has to work a bit
harder to meet the requirement.
So far as I can tell, no other WAL replay routines have this type of bug.
In particular, the index-related replay routines, which would certainly be
broken if they had to meet the same standard, are not at risk because we
do not have coding rules that allow access to an index page when not
holding a buffer lock on it.
Back-patch to 9.0 where Hot Standby was added.
All other WAL redo routines either call RestoreBkpBlocks() or Assert that
they haven't been passed any backup blocks. Make this one do likewise.
Also, fix incorrect routine name in its failure message.
This reverts commit 500cf66d55. As was
more or less expected, a small minority of platforms won't accept
denormalized input even with the recent changes. It doesn't seem
especially helpful to test this if we're going to have to provide an
alternate expected-file to allow failure.
Further improve on commit c75e143646.
Instead of building both .o files and binaries in the same make rule,
just rely on the normal .c -> .o rule. This will ensure that
dependency tracking is used when enabled. To do this, disable the
implicit direct .c -> binary rule globally, which will also prevent
the original problem (*.dSYM junk) from reappearing elsewhere.
When testing bits (but not when setting or clearing them), we now
won't check whether the map has been extended. This significantly
improves performance in the case where the visibility map doesn't
exist yet, by avoiding an extra system call per tuple. To make
sure backends notice eventually, send an smgr inval on VM extension.
Dean Rasheed, with minor modifications by me.
This was submitted with the previous patch, but I'm committing it
separately to ease backing it out if these results prove too unportable.
Marti Raudsepp, after a proposal by Jeroen Vermeulen
On some platforms, strtod() reports ERANGE for a denormalized value (ie,
one that can be represented as distinct from zero, but is too small to have
full precision). On others, it doesn't. It seems better to try to accept
these values consistently, so add a test to see if the result value
indicates a true out-of-range condition. This should be okay per Single
Unix Spec. On machines where the underlying math isn't IEEE standard, the
behavior for such small numbers may not be very consistent, but then it
wouldn't be anyway.
Marti Raudsepp, after a proposal by Jeroen Vermeulen
Don't quote the output of format_procedure(); it's already quoted quite
enough. Remove the fn_name field, which was now just dead weight. Fix
remaining expected-output files.
Like the XML data type, we simply store JSON data as text, after checking
that it is valid. More complex operations such as canonicalization and
comparison may come later, but this is enough for not.
There are a few open issues here, such as whether we should attempt to
detect UTF-8 surrogate pairs represented as \uXXXX\uYYYY, but this gets
the basic framework in place.
If there was a wait-until-free process in the head of the wait queue,
followed by an exclusive locker, the exclusive locker was not be woken up
as it should.
The sequence USAGE privilege is sufficiently similar to the SQL
standard that it seems reasonable to show in the information schema.
Also add some compatibility notes about it on the GRANT reference
page.
Add result object functions .colnames, .coltypes, .coltypmods to
obtain information about the result column names and types, which was
previously not possible in the PL/Python SPI interface.
reviewed by Abhijit Menon-Sen
In some hopeless situations, certain library functions in libpq and
libpgport quit the program. Use abort() for that instead of exit(),
so we don't interfere with the normal exit codes the program might
use, we clearly signal the abnormal termination, and the caller has a
chance of catching the termination.
This was originally pointed out by Debian's Lintian program.
When a backend needs to flush the WAL, and someone else is already flushing
the WAL, wait until it releases the WALInsertLock and check if we still need
to do the flush or if the other backend already did the work for us, before
acquiring WALInsertLock. This helps group commit, because when the WAL flush
finishes, all the backends that were waiting for it can be woken up in one
go, and the can all concurrently observe that they're done, rather than
waking them up one by one in a cascading fashion.
This is based on a new LWLock function, LWLockWaitUntilFree(), which has
peculiar semantics. If the lock is immediately free, it grabs the lock and
returns true. If it's not free, it waits until it is released, but then
returns false without grabbing the lock. This is used in XLogFlush(), so
that when the lock is acquired, the backend flushes the WAL, but if it's
not, the backend first checks the current flush location before retrying.
Original patch and benchmarking by Peter Geoghegan and Simon Riggs, although
this patch as committed ended up being very different from that.
When default_text_search_config, default_tablespace, or temp_tablespaces
setting is set per-user or per-database, with an "ALTER USER/DATABASE SET
..." statement, don't throw an error if the text search configuration or
tablespace does not exist. In case of text search configuration, even if
it doesn't exist in the current database, it might exist in another
database, where the setting is intended to have its effect. This behavior
is now the same as search_path's.
Tablespaces are cluster-wide, so the same argument doesn't hold for
tablespaces, but there's a problem with pg_dumpall: it dumps "ALTER USER
SET ..." statements before the "CREATE TABLESPACE" statements. Arguably
that's pg_dumpall's fault - it should dump the statements in such an order
that the tablespace is created first and then the "ALTER USER SET
default_tablespace ..." statements after that - but it seems better to be
consistent with search_path and default_text_search_config anyway. Besides,
you could still create a dump that throws an error, by creating the
tablespace, running "ALTER USER SET default_tablespace", then dropping the
tablespace and running pg_dumpall on that.
Backpatch to all supported versions.
btcostestimate() makes an estimate of the number of index tuples that will
be visited based on knowledge of which index clauses can actually bound the
scan within nbtree. However, it forgot to account for partial indexes in
this calculation, with the result that the cost of the index scan could be
significantly overestimated for a partial index. Fix that by merging the
predicate with the abbreviated indexclause list, in the same way as we do
with the full list to estimate how many heap tuples will be visited.
Also, slightly increase the "fudge factor" that's meant to give preference
to smaller indexes over larger ones. While this is applied to all indexes,
it's most important for partial indexes since it can be the only factor
that makes a partial index look cheaper than a similar full index.
Experimentation shows that the existing value is so small as to easily get
swamped by noise such as page-boundary-roundoff behavior. I'm tempted to
kick it up more than this, but will refrain for now.
Per report from Ruben Blanco. These are long-standing issues, but given
the lack of prior complaints I'm not going to risk changing planner
behavior in back branches by back-patching.
In commit 57664ed25e, I made the planner
wrap non-simple-variable outputs of appendrel children (IOW, child SELECTs
of UNION ALL subqueries) inside PlaceHolderVars, in order to solve some
issues with EquivalenceClass processing. However, this means that any
upper-level WHERE clauses mentioning such outputs will now contain
PlaceHolderVars after they're pushed down into the appendrel child,
and that prevents indxpath.c from recognizing that they could be matched
to index expressions. To fix, add explicit stripping of PlaceHolderVars
from index operands, same as we have long done for RelabelType nodes.
Add a regression test covering both this and the plain-UNION case (which
is a totally different code path, but should also be able to do it).
Per bug #6416 from Matteo Beccati. Back-patch to 9.1, same as the
previous change.
Formerly we passed an empty list to each per-child-table invocation of
grouping_planner, and then merged the results into the global list.
However, that fails if there's a CTE attached to the statement, because
create_ctescan_plan uses the list to find the plan referenced by a CTE
reference; so it was unable to find any CTEs attached to the outer UPDATE
or DELETE. But there's no real reason not to use the same list throughout
the process, and doing so is simpler and faster anyway.
Per report from Josh Berkus of "could not find plan for CTE" failures.
Back-patch to 9.1 where we added support for WITH attached to UPDATE or
DELETE. Add some regression test cases, too.
Much more could be done here, but at least now we have *some* automated
test coverage of that mechanism. In particular this tests the writable-CTE
case reported by Phil Sorber.
In passing, remove isolationtester's arbitrary restriction on the number of
steps in a permutation list. I used this so that a single spec file could
be used to run several related test scenarios, but there are other possible
reasons to want a step series that's not exactly a permutation. Improve
documentation and fix a couple other nits as well.
We can't just skip initializing such subplans, because the referencing CTE
node will expect to find the subplan available when it initializes. That
in turn means that ExecInitModifyTable must allow the case (which actually
it needed to do anyway, since there's no guarantee that ModifyTable is
exactly at the top of the CTE plan tree). So move the complaint about not
being allowed in EvalPlanQual mode to execution instead of initialization.
Testing turned up yet another problem, which is that we'd try to
re-initialize the result relation's index list, leading to leaks and
dangling pointers.
Per report from Phil Sorber. Back-patch to 9.1 where data-modifying CTEs
were introduced.
After the planner was fixed to convert some IN/EXISTS subqueries into
semijoins or antijoins, we had to prevent it from doing that in some
cases where the plans risked getting much worse. The reason the plans
got worse was that in the unoptimized implementation, subqueries could
reference parameters from the outer query at any join level, and so
full table scans could be avoided even if they were one or more levels
of join below where the semi/anti join would be. Now that we have
sufficient mechanism in the planner to handle such cases properly,
it should no longer be necessary to play dumb here.
This reverts commits 07b9936a0f and
cd1f0d04bf. The latter was a stopgap
fix that wasn't really sufficiently analyzed at the time. Rather
than just restricting ourselves to cases where the new join can be
stacked on the right-hand input, we should also consider whether it
can be stacked on the left-hand input.
This patch fixes the planner so that it can generate nestloop-with-
inner-indexscan plans even with one or more levels of joining between
the indexscan and the nestloop join that is supplying the parameter.
The executor was fixed to handle such cases some time ago, but the
planner was not ready. This should improve our plans in many situations
where join ordering restrictions formerly forced complete table scans.
There is probably a fair amount of tuning work yet to be done, because
of various heuristics that have been added to limit the number of
parameterized paths considered. However, we are not going to find out
what needs to be adjusted until the code gets some real-world use, so
it's time to get it in there where it can be tested easily.
Note API change for index AM amcostestimate functions. I'm not aware of
any non-core index AMs, but if there are any, they will need minor
adjustments.
Hitherto, the information schema only showed explicitly granted
privileges that were visible in the *acl catalog columns. If no
privileges had been granted, the implicit privileges were not shown.
To fix that, add an SQL-accessible version of the acldefault()
function, and use that inside the aclexplode() calls to substitute the
catalog-specific default privilege set for null values.
reviewed by Abhijit Menon-Sen
In e5e2fc842c, blank lines were removed
after a comment block, which now looks as though the comment refers to
the immediately following code, but it actually refers to the
preceding code. So put the blank lines back.
This has been the behavior already in most cases, but through
omission, ALTER DOMAIN / OWNER TO and ALTER DOMAIN / SET SCHEMA would
silently work on non-domain types as well.
Those fields only appear in the structs so that genbki.pl can create
the BKI bootstrap files for the catalogs. But they are not actually
usable from C. So hiding them can prevent coding mistakes, saves
stack space, and can help the compiler.
In certain catalogs, the first variable-length field has been kept
visible after manual inspection. These exceptions are noted in C
comments.
reviewed by Tom Lane
Normally, accessing variable-length members of catalog structures past
the first one doesn't work at all. Here, it happened to work because
indnatts was checked to be 1, and so the defined FormData_pg_index
layout, using int2vector[1] and oidvector[1] for variable-length
arrays, happened to match the actual memory layout. But it's a very
fragile assumption, and it's not in a performance-critical path, so
code it properly using heap_getattr() instead.
bug analysis by Tom Lane
Parallel dump will need to repeat these steps for each new connection,
so it's better to have this logic in its own function.
Extracted (with some changes) from a much larger patch
by Joachim Wieland.
Our own qsort_arg() implementation doesn't have the defect previously
observed to affect only QNX 4, so it seems sufficiently to assert that
it isn't broken rather than retesting. Also, update a few comments to
clarify why it's valuable to retain a tie-break rule based on CTID
during index builds.
Peter Geoghegan, with slight tweaks by me.
We now use the same error message for ALTER TABLE .. ADD COLUMN or
ALTER TABLE .. RENAME COLUMN that we do for CREATE TABLE. The old
message was accurate, but might be confusing to users not aware of our
system columns.
Vik Reykja, with some changes by me, and further proofreading by Tom Lane
To make it wake up promptly when activity starts again, backends nudge it
by setting a latch in MarkBufferDirty(). The latch is kept set while
bgwriter is active, so there is very little overhead from that when the
system is busy. It is only armed before going into longer sleep.
Peter Geoghegan, with some changes by me.
This doesn't do anything useful just yet, but is intended as supporting
infrastructure for allowing sepgsql to sensibly check DROP permissions.
KaiGai Kohei and Robert Haas
Add counters for number and size of temporary files used
for spill-to-disk queries for each database to the
pg_stat_database view.
Tomas Vondra, review by Magnus Hagander
Rip out a regression test that doesn't play well with settings put in
place by the build farm, and rewrite the code in CheckIndexCompatible
in a hopefully more transparent style.
This enables a bunch of features, notably ON_ERROR_ROLLBACK. It also
makes COPY failure (either in the server or psql) as a whole behave more
sanely in psql.
Additionally, having more commands in the same command line as COPY
works better (though since psql splits lines at semicolons, this doesn't
matter much unless you're using -c).
Also tighten a couple of switches on PQresultStatus() to add
PGRES_COPY_BOTH support and stop assuming that unknown statuses received
are errors; have those print diagnostics where warranted.
Author: Noah Misch
This gives up the "don't rewrite the index" behavior in a couple of
relatively unimportant cases, such as changing between an array type
and an unconstrained domain over that array type, in return for
making this code more future-proof.
Noah Misch
Base backup follows recommended procedure, plus goes to great
lengths to ensure that partial page writes are avoided.
Jun Ishizuka and Fujii Masao, with minor modifications
This reports the depth level of triggers currently in execution, or zero
if not called from inside a trigger.
No catversion bump in this patch, but you have to initdb if you want
access to the new function.
Author: Kevin Grittner
Replication occurs only to memory on standby, not to disk,
so provides additional performance if user wishes to
reduce durability level slightly. Adds concept of multiple
independent sync rep queues.
Fujii Masao and Simon Riggs
Drop the role we create, so regression tests pass even when run more
than once against the same cluster, a problem noted by Tom Lane and
Jeff Janes. Also, rename the temporary role so that it starts with
"regress_", to make it unlikely that we'll collide with an existing
role name while running "make installcheck", per further gripe from
Tom Lane.
We log AccessExclusiveLocks for replay onto standby nodes,
but because of timing issues on ProcArray it is possible to
log a lock that is still held by a just committed transaction
that is very soon to be removed. To avoid any timing issue we
avoid applying locks made by transactions with InvalidXid.
Simon Riggs, bug report Tom Lane, diagnosis Pavan Deolasee
This separates the state (running/idle/idleintransaction etc) into
it's own field ("state"), and leaves the query field containing just
query text.
The query text will now mean "current query" when a query is running
and "last query" in other states. Accordingly,the field has been
renamed from current_query to query.
Since backwards compatibility was broken anyway to make that, the procpid
field has also been renamed to pid - along with the same field in
pg_stat_replication for consistency.
Scott Mead and Magnus Hagander, review work from Greg Smith
That avoids errors when the functions are used in queries like "SELECT
pg_relation_size(oid) FROM pg_class", and a table is dropped concurrently.
Phil Sorber
When the only remaining active transactions are READ ONLY, we do a "partial
cleanup" of committed transactions because certain types of conflicts
aren't possible anymore. For committed r/w transactions, we release the
SIREAD locks but keep the SERIALIZABLEXACT. However, for committed r/o
transactions, we can go further and release the SERIALIZABLEXACT too. The
problem was with the latter case: we were returning the SERIALIZABLEXACT to
the free list without removing it from the finished list.
The only real change in the patch is the SHMQueueDelete line, but I also
reworked some of the surrounding code to make it obvious that r/o and r/w
transactions are handled differently -- the existing code felt a bit too
clever.
Dan Ports
This prevents the postmaster from unexpectedly croaking if postgresql.conf
contains something like:
include 'invalid_directory_name'
Noah Misch. Reviewed by Tom Lane and myself.
When creating a child table, or when attaching an existing table as
child of another, we must not allow inheritable constraints to be
merged with non-inheritable ones, because then grandchildren would not
properly get the constraint. This would violate the grandparent's
expectations.
Bugs noted by Robert Haas.
Author: Nikhil Sontakke
In the previous coding, it was possible for a relation to be created
via CREATE TABLE, CREATE VIEW, CREATE SEQUENCE, CREATE FOREIGN TABLE,
etc. in a schema while that schema was meanwhile being concurrently
dropped. This led to a pg_class entry with an invalid relnamespace
value. The same problem could occur if a relation was moved using
ALTER .. SET SCHEMA while the target schema was being concurrently
dropped. This patch prevents both of those scenarios by locking the
schema to which the relation is being added using AccessShareLock,
which conflicts with the AccessExclusiveLock taken by DROP.
As a desirable side effect, this also prevents the use of CREATE OR
REPLACE VIEW to queue for an AccessExclusiveLock on a relation on which
you have no rights: that will now fail immediately with a permissions
error, before trying to obtain a lock.
We need similar protection for all other object types, but as everything
other than relations uses a slightly different set of code paths, I'm
leaving that for a separate commit.
Original complaint (as far as I could find) about CREATE by Nikhil
Sontakke; risk for ALTER .. SET SCHEMA pointed out by Tom Lane;
further details by Dan Farina; patch by me; review by Hitoshi Harada.
When the remote end of the pipe is closed, select() reports the fd as
readable, but poll() has a separate POLLHUP return code for that.
Spotted by Peter Geoghegan.
Allows a user to use pg_cancel_queries() to cancel queries in
other backends if they are running under the same role.
pg_terminate_backend() still requires superuser permissoins.
Short patch, many authors working on the bikeshed: Magnus Hagander,
Josh Kupershmidt, Edward Muller, Greg Smith.
isolationtester is now able to continue running other permutations when
it detects that one of them is invalid, which is useful during initial
development of spec files.
Author: Alexander Shulgin
superuser doesn't have doesn't make much sense, as a superuser can do
whatever he wants through other means, anyway. So instead of granting
replication privilege to superusers in CREATE USER time by default, allow
replication connection from superusers whether or not they have the
replication privilege.
Patch by Noah Misch, per discussion on bug report #6264
As noted by Tom Lane, the previous coding in this area, which I
introduced in commit bbb6e559c4, was
poorly tested and caused the vacuum's second heap to go into what would
have been an infinite loop but for the fact that it eventually caused a
memory allocation failure. This version seems to work better.
Previously we used ReadRecPtr rather than EndRecPtr, which was
not a serious error but caused pg_stat_replication to report
incorrect replay_location until at least one WAL record is replayed.
Fujii Masao
In commit 7b0d0e9356, I made CLUSTER and
VACUUM FULL try to preserve toast value OIDs from the original toast table
to the new one. However, if we have to copy both live and recently-dead
versions of a row that has a toasted column, those versions may well
reference the same toast value with the same OID. The patch then led to
duplicate-key failures as we tried to insert the toast value twice with the
same OID. (The previous behavior was not very desirable either, since it
would have silently inserted the same value twice with different OIDs.
That wastes space, but what's worse is that the toast values inserted for
already-dead heap rows would not be reclaimed by subsequent ordinary
VACUUMs, since they go into the new toast table marked live not deleted.)
To fix, check if the copied OID already exists in the new toast table, and
if so, assume that it stores the desired value. This is reasonably safe
since the only case where we will copy an OID from a previous toast pointer
is when toast_insert_or_update was given that toast pointer and so we just
pulled the data from the old table; if we got two different values that way
then we have big problems anyway. We do have to assume that no other
backend is inserting items into the new toast table concurrently, but
that's surely safe for CLUSTER and VACUUM FULL.
Per bug #6393 from Maxim Boguk. Back-patch to 9.0, same as the previous
patch.
The originally-chosen test case gives different results in es_EC locale
because of unusual rule for sorting strings beginning with "LL". Adjust
the comparison value to avoid that, while hopefully not introducing new
locale dependencies elsewhere. Per report from Jaime Casanova.
A permutation that specifies more steps than defined causes
isolationtester to crash, so avoid that. Using less steps than defined
should probably not be a problem, but no spec currently does that.
constructed before acquiring WALInsertLock, which slightly reduces the time
the lock is held. Although I could not measure any benefit in benchmarks,
the code is more readable this way.
Teach pg_basebackup in streaming mode to deal with keepalive messages.
Also change the order of checks to complain at the message rather than
block size when a new message is introduced.
In passing, switch to using sizeof() instead of hardcoded sizes for
WAL protocol structs.
The original implementation of this interpreted it as a kind of
"inheritance" facility and named all the internal structures
accordingly. This turned out to be very confusing, because it has
nothing to do with the INHERITS feature. So rename all the internal
parser infrastructure, update the comments, adjust the error messages,
and split up the regression tests.
Historically we've used the SWPB instruction for TAS() on ARM, but this
is deprecated and not available on ARMv6 and later. Instead, make use
of a GCC builtin if available. We'll still fall back to SWPB if not,
so as not to break existing ports using older GCC versions.
Eventually we might want to try using __sync_lock_test_and_set() on some
other architectures too, but for now that seems to present only risk and
not reward.
Back-patch to all supported versions, since people might want to use any
of them on more recent ARM chips.
Martin Pitt
This squeezes out a bunch of alignment padding, reducing the size
from 72 to 56 bytes on my machine. At least in my testing, this
didn't produce any measurable performance improvement, but the space
savings seem like enough justification.
Andres Freund
ALTER TABLE (and ALTER VIEW, ALTER SEQUENCE, etc.) now use a
RangeVarGetRelid callback to check permissions before acquiring a table
lock. We also now use the same callback for all forms of ALTER TABLE,
rather than having separate, almost-identical callbacks for ALTER TABLE
.. SET SCHEMA and ALTER TABLE .. RENAME, and no callback at all for
everything else.
I went ahead and changed the code so that no form of ALTER TABLE works
on foreign tables; you must use ALTER FOREIGN TABLE instead. In 9.1,
it was possible to use ALTER TABLE .. SET SCHEMA or ALTER TABLE ..
RENAME on a foreign table, but not any other form of ALTER TABLE, which
did not seem terribly useful or consistent.
Patch by me; review by Noah Misch.
Previously, this was hardcoded: we always had 8. Performance testing
shows that isn't enough, especially on big SMP systems, so we allow it
to scale up as high as 32 when there's adequate memory. On the flip
side, when shared_buffers is very small, drop the number of CLOG buffers
down to as little as 4, so that we can start the postmaster even
when very little shared memory is available.
Per extensive discussion with Simon Riggs, Tom Lane, and others on
pgsql-hackers.
In commit 6545a901aa, I removed the mini SQL
lexer that was in pg_backup_db.c, thinking that it had no real purpose
beyond separating COPY data from SQL commands, which purpose had been
obsoleted by long-ago fixes in pg_dump's archive file format.
Unfortunately this was in error: that code was also used to identify
command boundaries in INSERT-style table data, which is run together as a
single string in the archive file for better compressibility. As a result,
direct-to-database restores from archive files made with --inserts or
--column-inserts fail in our latest releases, as reported by Dick Visser.
To fix, restore the mini SQL lexer, but simplify it by adjusting the
calling logic so that it's only required to cope with INSERT-style table
data, not arbitrary SQL commands. This allows us to not have to deal with
SQL comments, E'' strings, or dollar-quoted strings, none of which have
ever been emitted by dumpTableData_insert.
Also, fix the lexer to cope with standard-conforming strings, which was the
actual bug that the previous patch was meant to solve.
Back-patch to all supported branches. The previous patch went back to 8.2,
which unfortunately means that the EOL release of 8.2 contains this bug,
but I don't think we're doing another 8.2 release just because of that.
As noted by Heikki Linnakangas, the previous coding confused the "flags"
variable with the "mask" variable. The affect of this appears to be that
unlogged buffers would get written out at every checkpoint rather than
only at shutdown time. Although that's arguably an acceptable failure
mode, I'm back-patching this change, since it seems like a poor idea to
rely on this happening to work.
pg_dump sorts operators by name, but operators with the same name come
out in random order. Now operators with the same name are dumped in
the order prefix, postfix, infix. (This is consistent with functions,
which are dumped in increasing number of argument order.)
ALTER DOMAIN / DROP CONSTRAINT on a nonexistent constraint name did
not report any error. Now it reports an error. The IF EXISTS option
was added to get the usual behavior of ignoring nonexistent objects to
drop.
Certain things like typeglobs or readonly things like $^V cause
perl's SvPVutf8() to die nastily and crash the backend. To avoid
that bug we make a copy of the object, which will subsequently be
garbage collected.
Back patched to 9.1 where we first started using SvPVutf8().
Per -hackers discussion. Original problem reported by David Wheeler.
As previously coded, the QueryDesc's dest pointer was left dangling
(pointing at an already-freed receiver object) after ExecutorEnd. It's a
bit astonishing that it took us this long to notice, and I'm not sure that
the known problem case with SQL functions is the only one. Fix it by
saving and restoring the original receiver pointer, which seems the most
bulletproof way of ensuring any related bugs are also covered.
Per bug #6379 from Paul Ramsey. Back-patch to 8.4 where the current
handling of SELECT INTO was introduced.
Further testing convinces me that this is helpful at sufficiently high
contention levels, though it's still worrisome that it loses slightly
at lower contention levels.
Per Manabu Ori.
Because coerce_type recurses into the argument of a CollateExpr,
coerce_to_target_type's longstanding code for detecting whether coerce_type
had actually done anything (to wit, returned a different node than it
passed in) was broken in 9.1. This resulted in unexpected failures in
hide_coercion_node; which was not the latter's fault, since it's critical
that we never call it on anything that wasn't inserted by coerce_type.
(Else we might decide to "hide" a user-written function call.)
Fix by removing and replacing the CollateExpr in coerce_to_target_type
itself. This is all pretty ugly but I don't immediately see a way to make
it nicer.
Per report from Jean-Yves F. Barbier.
This is allegedly a win, at least on some PPC implementations, according
to the PPC ISA documents. However, as with LWARX hints, some PPC
platforms give an illegal-instruction failure. Use the same trick as
before of assuming that PPC64 platforms will accept it; we might need to
refine that based on experience, but there are other projects doing
likewise according to google.
I did not add an assembler compatibility test because LWSYNC has been
around much longer than hint bits, and it seems unlikely that any
toolchains currently in use don't recognize it.
Previously we defined slock_t as 8 bytes on PPC64, but the TAS assembly
code uses word-wide operations regardless, so that the second word was
just wasted space. There doesn't appear to be any performance benefit
in adding the second word, so get rid of it to simplify the code.
The hint bit makes for a small but measurable performance improvement
in access to contended spinlocks.
On the other hand, some PPC chips give an illegal-instruction failure.
There doesn't seem to be a completely bulletproof way to tell whether the
hint bit will cause an illegal-instruction failure other than by trying
it; but most if not all 64-bit PPC machines should accept it, so follow
the Linux kernel's lead and assume it's okay to use it in 64-bit builds.
Of course we must also check whether the assembler accepts the command,
since even with a recent CPU the toolchain could be old.
Patch by Manabu Ori, significantly modified by me.
This reverts commit ff68b256a5.
The recent change to use -fexcess-precision=standard should make those
Asserts safe, and does fix a test case that formerly crashed for me,
so I think there's no need to have a cross-version difference in the
code here.
The original test cases gave varying results depending on whether the
locale sorts digits before or after letters. Since that's not really
what we wish to test here, adjust the test data to not contain any strings
beginning with digits. Per report from Pavel Stehule.
All supported platforms support the C89 standard function atexit()
(SunOS 4 probably being the last one not to), and supporting both
makes the code clumsy.
In commit e2c2c2e8b1 I made use of nested
list structures to show which clauses went with which index columns, but
on reflection that's a data structure that only an old-line Lisp hacker
could love. Worse, it adds unnecessary complication to the many places
that don't much care which clauses go with which index columns. Revert
to the previous arrangement of flat lists of clauses, and instead add a
parallel integer list of column numbers. The places that care about the
pairing can chase both lists with forboth(), while the places that don't
care just examine one list the same as before.
The only real downside to this is that there are now two more lists that
need to be passed to amcostestimate functions in case they care about
column matching (which btcostestimate does, so not passing the info is not
an option). Rather than deal with 11-argument amcostestimate functions,
pass just the IndexPath and expect the functions to extract fields from it.
That gets us down to 7 arguments which is better than 11, and it seems
more future-proof against likely additions to the information we keep
about an index path.
It's potentially useful for an index to repeat the same indexable column
or expression in multiple index columns, if the columns have different
opclasses. (If they share opclasses too, the duplicate column is pretty
useless, but nonetheless we've allowed such cases since 9.0.) However,
the planner failed to cope with this, because createplan.c was relying on
simple equal() matching to figure out which index column each index qual
is intended for. We do have that information available upstream in
indxpath.c, though, so the fix is to not flatten the multi-level indexquals
list when putting it into an IndexPath. Then we can rely on the sublist
structure to identify target index columns in createplan.c. There's a
similar issue for index ORDER BYs (the KNNGIST feature), so introduce a
multi-level-list representation for that too. This adds a bit more
representational overhead, but we might more or less buy that back by not
having to search for matching index columns anymore in createplan.c;
likewise btcostestimate saves some cycles.
Per bug #6351 from Christian Rudolph. Likely symptoms include the "btree
index keys must be ordered by attribute" failure shown there, as well as
"operator MMMM is not a member of opfamily NNNN".
Although this is a pre-existing problem that can be demonstrated in 9.0 and
9.1, I'm not going to back-patch it, because the API changes in the planner
seem likely to break things such as index plugins. The corner cases where
this matters seem too narrow to justify possibly breaking things in a minor
release.
When a view is marked as a security barrier, it will not be pulled up
into the containing query, and no quals will be pushed down into it,
so that no function or operator chosen by the user can be applied to
rows not exposed by the view. Views not configured with this
option cannot provide robust row-level security, but will perform far
better.
Patch by KaiGai Kohei; original problem report by Heikki Linnakangas
(in October 2009!). Review (in earlier versions) by Noah Misch and
others. Design advice by Tom Lane and myself. Further review and
cleanup by me.
You could already rename domains using ALTER TYPE, but with this new
command it is more consistent with how other commands treat domains as
a subcategory of types.
This has been broken just about forever (or more specifically, commit
7f4981f4af) and nobody noticed until
Richard Huxton reported it recently. Analysis and fix by Ross
Reedstrom, although I didn't use his patch. This doesn't seem
important enough to back-patch and is mildly backward incompatible, so
I'm just doing this in master.
We forgot to modify column ACLs, so privileges were still shown as having
been granted by the old owner. This meant that neither the new owner nor
a superuser could revoke the now-untraceable-to-table-owner permissions.
Per bug #6350 from Marc Balmer.
This has been wrong since column ACLs were added, so back-patch to 8.4.
In the previous coding, a user could queue up for an AccessExclusiveLock
on a table they did not have permission to cluster, thus potentially
interfering with access by authorized users who got stuck waiting behind
the AccessExclusiveLock. This approach avoids that. cluster() has the
same permissions-checking requirements as REINDEX TABLE, so this commit
moves the now-shared callback to tablecmds.c and renames it, per
discussion with Noah Misch.
When a PORTAL_ONE_SELECT query is executed, we can opportunistically
reuse the parse/plan shot for the execution phase. This cuts down the
number of snapshots per simple query from 2 to 1 for the simple
protocol, and 3 to 2 for the extended protocol. Since we are only
reusing a snapshot taken early in the processing of the same protocol
message, the change shouldn't be user-visible, except that the remote
possibility of the planning and execution snapshots being different is
eliminated.
Note that this change does not make it safe to assume that the parse/plan
snapshot will certainly be reused; that will currently only happen if
PortalStart() decides to use the PORTAL_ONE_SELECT strategy. It might
be worth trying to provide some stronger guarantees here in the future,
but for now we don't.
Patch by me; review by Dimitri Fontaine.
The original coding of this function overlooked the possibility that
it could be passed anything except simple OpExpr indexquals. But
ScalarArrayOpExpr is possible too, and the code would probably crash
(and surely give ridiculous answers) in such a case. Add logic to try
to estimate sanely for such cases.
In passing, fix the treatment of inner-indexscan cost estimation: it was
failing to scale up properly for multiple iterations of a nestloop.
(I think somebody might've thought that index_pages_fetched() is linear,
but of course it's not.)
Report, diagnosis, and preliminary patch by Marti Raudsepp; I refactored
it a bit and fixed the cost estimation.
Back-patch into 9.1 where the bogus code was introduced.
Peter Eisentraut
Magnus Hagander
Heikki Linnakangas
Joe Conway
Tom Lane
Simon Riggs
Bruce Momjian
Robert Haas
Alvaro Herrera
Andrew Dunstan
Tatsuo Ishii
Michael Meskes