The code I added in commit f343a880d5 was
careless about preserving AND/OR flatness: it could create a structure with
an OR node directly underneath another one. That breaks an assumption
that's fairly important for planning efficiency, not to mention triggering
various Asserts (as reported by Benjamin Smith). Add a trifle more logic
to handle the case properly.
Some Sparc CPUs can be run in various coherence models, ranging from
RMO (relaxed) over PSO (partial) to TSO (total). Solaris has always
run CPUs in TSO mode while in userland, but linux didn't use to and
the various *BSDs still don't. Unfortunately the sparc TAS/S_UNLOCK
were only correct under TSO. Fix that by adding the necessary memory
barrier instructions. On sparcv8+, which should be all relevant CPUs,
these are treated as NOPs if the current consistency model doesn't
require the barriers.
Discussion: 20140630222854.GW26930@awork2.anarazel.de
Will be backpatched to all released branches once a few buildfarm
cycles haven't shown up problems. As I've no access to sparc, this is
blindly written.
Now that ALTER TABLE .. ALL IN TABLESPACE has replaced the previous
ALTER TABLESPACE approach, it makes sense to move the calls down in
to ProcessUtilitySlow where the rest of ALTER TABLE is handled.
This also means that event triggers will support ALTER TABLE .. ALL
(which was the impetus for the original change, though it has other
good qualities also).
Álvaro Herrera
Back-patch to 9.4 as the original rework was.
psql's \s (print command history) doesn't work at all with recent libedit
versions when printing to the terminal, because libedit tries to do an
fchmod() on the target file which will fail if the target is /dev/tty.
(We'd already noted this in the context of the target being /dev/null.)
Even before that, it didn't work pleasantly, because libedit likes to
encode the command history file (to ensure successful reloading), which
renders it nigh unreadable, not to mention significantly different-looking
depending on exactly which libedit version you have. So let's forget using
write_history() for this purpose, and instead print the data ourselves,
using logic similar to that used to iterate over the history for newline
encoding/decoding purposes.
While we're at it, insert the ability to use the pager when \s is printing
to the terminal. This has been an acknowledged shortcoming of \s for many
years, so while you could argue it's not exactly a back-patchable bug fix
it still seems like a good improvement. Anyone who's seriously annoyed
at this can use "\s /dev/tty" or local equivalent to get the old behavior.
Experimentation with this showed that the history iteration logic was
actually rather broken when used with libedit. It turns out that with
libedit you have to use previous_history() not next_history() to advance
to more recent history entries. The easiest and most robust fix for this
seems to be to make a run-time test to verify which function to call.
We had not noticed this because libedit doesn't really need the newline
encoding logic: its own encoding ensures that command entries containing
newlines are reloaded correctly (unlike libreadline). So the effective
behavior with recent libedits was that only the oldest history entry got
newline-encoded or newline-decoded. However, because of yet other bugs in
history_set_pos(), some old versions of libedit allowed the existing loop
logic to reach entries besides the oldest, which means there may be libedit
~/.psql_history files out there containing encoded newlines in more than
just the oldest entry. To ensure we can reload such files, it seems
appropriate to back-patch this fix, even though that will result in some
incompatibility with older psql versions (ie, multiline history entries
written by a psql with this fix will look corrupted to a psql without it,
if its libedit is reasonably up to date).
Stepan Rutz and Tom Lane
The old claim is from my commit d06ebdb8d3 of
2000-07-17, but it seems to have been a plain old thinko; sum(float4) has
been distinct from sum(float8) since Berkeley days. Noted by KaiGai Kohei.
While at it, mention the existence of sum(money), which is also of
embarrassingly ancient vintage.
Update the tab completion for the changes made in
3c4cf08087, which rework 'MOVE ALL' to be
'ALTER .. ALL IN TABLESPACE'.
Fujii Masao
Back-patch to 9.4, as the original change was.
The link to the NIST web page about DES standards leads to nowhere, and
according to archive.org has been forwarded to an unrelated page for
many years. Therefore, just remove that link. More up to date
information can be found via Wikipedia, for example.
The syntax summary previously failed to clarify that the first
argument is also optional. The textual description did mention it,
but all the way at the bottom. It fits better with the command
overview, so move it there, and fix the summary also.
Back-patch to 9.4 where \pset without arguments was supported.
Dilip Kumar, reviewed by Fabien Coelho
The regression tests for contrib/test_decoding regularly failed on
postgres instances that were very slow. Either because the hardware
itself was slow or because very expensive debugging options like
CLOBBER_CACHE_ALWAYS were used.
The reason they failed was just that some additional transactions were
decoded. Analyze and vacuum, triggered by autovac.
To fix just add a option to test_decoding to only display transactions
in which a change was actually displayed. That's not pretty because it
removes information from the tests; but better than constantly failing
tests in very likely harmless ways.
Backpatch to 9.4 where logical decoding was introduced.
Discussion: 20140629142511.GA26930@awork2.anarazel.de
68a2e52bba has introduced LWLockAcquireCommon() containing the
previous contents of LWLockAcquire() plus added functionality. The
latter then calls it, just like LWLockAcquireWithVar(). Because the
majority of callers don't need the added functionality, declare the
common code as inline. The compiler then can optimize away the unused
code. Doing so is also useful when looking at profiles, to
differentiate the users.
Backpatch to 9.4, the first branch to contain LWLockAcquireCommon().
Errors detected using Topy (https://github.com/intgr/topy), all
changes verified by hand and some manual tweaks added.
Marti Raudsepp
Individual changes backpatched, where applicable, as far as 9.0.
The list of posting lists it's dealing with can contain placeholders for
deleted posting lists. The placeholders are kept around so that they can
be WAL-logged, but we must be careful to not try to access them.
This fixes bug #11280, reported by Mårten Svantesson. Backpatch to 9.4,
where the compressed data leaf page code was added.
In commit 45e02e3232, we intentionally
disallowed updates on individual elements of oidvector columns. While that
still seems like a sane idea in the abstract, we (I) forgot that citext's
"upgrade from unpackaged" script did in fact perform exactly such updates,
in order to fix the problem that citext indexes should have a collation
but would not in databases dumped or upgraded from pre-9.1 installations.
Even if we wanted to add casts to allow such updates, there's no practical
way to do so in the back branches, so the only real alternative is to make
citext's kluge even klugier. In this patch, I cast the oidvector to text,
fix its contents with regexp_replace, and cast back to oidvector. (Ugh!)
Since the aforementioned commit went into all active branches, we have to
fix this in all branches that contain the now-broken update script.
Per report from Eric Malm.
If SELECT FOR UPDATE NOWAIT tries to lock a tuple that is concurrently
being updated, it might fail to honor its NOWAIT specification and block
instead of raising an error.
Fix by adding a no-wait flag to EvalPlanQualFetch which it can pass down
to heap_lock_tuple; also use it in EvalPlanQualFetch itself to avoid
blocking while waiting for a concurrent transaction.
Authors: Craig Ringer and Thomas Munro, tweaked by Álvaro
http://www.postgresql.org/message-id/51FB6703.9090801@2ndquadrant.com
Per Thomas Munro in the course of his SKIP LOCKED feature submission,
who also provided one of the isolation test specs.
Backpatch to 9.4, because that's as far back as it applies without
conflicts (although the bug goes all the way back). To that branch also
backpatch Thomas Munro's new NOWAIT test cases, committed in master by
Heikki as commit 9ee16b49f0 .
In some cases, not all Vars were being correctly marked as having been
modified for updatable security barrier views, which resulted in invalid
plans (eg: when security barrier views were created over top of
inheiritance structures).
In passing, be sure to update both varattno and varonattno, as _equalVar
won't consider the Vars identical otherwise. This isn't known to cause
any issues with updatable security barrier views, but was noticed as
missing while working on RLS and makes sense to get fixed.
Back-patch to 9.4 where updatable security barrier views were
introduced.
Use SECURITY_LOCAL_USERID_CHANGE while building temporary tables;
only escalate to SECURITY_RESTRICTED_OPERATION while potentially
running user-supplied code. The more secure mode was preventing
temp table creation. Add regression tests to cover this problem.
This fixes Bug #11208 reported by Bruno Emanuel de Andrade Silva.
Backpatch to 9.4, where the bug was introduced.
There's no point in setting up a context error callback when doing
conditional lock acquisition, because we never actually wait and so the
able wouldn't be able to see it.
Backpatch to 9.4, where this was added.
Some of the many error messages introduced in 458857cc missed 'FROM
unpackaged'. Also e016b724 and 45ffeb7e forgot to quote extension
version numbers.
Backpatch to 9.1, just like 458857cc which introduced the messages. Do
so because the error messages thrown when the wrong command is copy &
pasted aren't easy to understand.
We also don't track PREPARE, nor do we track planning time in general, so
let's ignore DEALLOCATE as well for consistency.
Backpatch to 9.4, but not further than that. Although it seems unlikely that
anyone is relying on the current behavior, this is a behavioral change.
Fabien Coelho
Add a note that some options can be specified multiple times to select
multiple objects to restore. This replaces the somewhat confusing use
of plurals in the option descriptions themselves.
Cause the path extraction operators to return their lefthand input,
not NULL, if the path array has no elements. This seems more consistent
since the case ought to correspond to applying the simple extraction
operator (->) zero times.
Cause other corner cases in field/element/path extraction to return NULL
rather than failing. This behavior is arguably more useful than throwing
an error, since it allows an expression index using these operators to be
built even when not all values in the column are suitable for the
extraction being indexed. Moreover, we already had multiple
inconsistencies between the path extraction operators and the simple
extraction operators, as well as inconsistencies between the JSON and
JSONB code paths. Adopt a uniform rule of returning NULL rather than
throwing an error when the JSON input does not have a structure that
permits the request to be satisfied.
Back-patch to 9.4. Update the release notes to list this as a behavior
change since 9.3.
Previously, we would first create the symlinks the way they are in the
original system, and at the end replace them with the mapped symlinks.
That never really made much sense, so now we create the symlink pointing
to the correct location to begin with, so that there's no need to fix
them at the end.
The old coding didn't work correctly on Windows, because Windows junction
points look more like directories than files, and ought to be removed with
rmdir rather than unlink. Also, it incorrectly used "%d" rather than "%u"
to print an Oid, but that's gone now.
Report and patch by Amit Kapila, with minor changes by me. Reviewed by
MauMau. Backpatch to 9.4, where the --tablespace feature was added.
As 'ALTER TABLESPACE .. MOVE ALL' really didn't change the tablespace
but instead changed objects inside tablespaces, it made sense to
rework the syntax and supporting functions to operate under the
'ALTER (TABLE|INDEX|MATERIALIZED VIEW)' syntax and to be in
tablecmds.c.
Pointed out by Alvaro, who also suggested the new syntax.
Back-patch to 9.4.
Cover some cases I omitted before, such as null and empty-string
elements in the path array. This exposes another inconsistency:
json_extract_path complains about empty path elements but
jsonb_extract_path does not.
jsonb's #> operator segfaulted (dereferencing a null pointer) if the RHS
was a zero-length array, as reported in bug #11207 from Justin Van Winkle.
json's #> operator returns NULL in such cases, so for the moment let's
make jsonb act likewise.
Also add a bunch of regression test queries memorializing the -> and #>
operators' behavior for this and other corner cases.
There is a good argument for changing some of these behaviors, as they
are not very consistent with each other, and throwing an error isn't
necessarily a desirable behavior for operators that are likely to be
used in indexes. However, everybody can agree that a core dump is the
Wrong Thing, and we need test cases even if we decide to change their
expected output later.
This reverts commit 083d29c65b.
The commit changed the code so that it causes an errors when
IDENTIFY_SYSTEM returns three columns. But which prevents us
from using the replication-related utilities against the server
with older version. This is not what we want. For that
compatibility, we allow the utilities to receive three columns
as the result of IDENTIFY_SYSTEM eventhough it actually returns
four columns in 9.4 or later.
Pointed out by Andres Freund.
5a991ef869 added new column into
the result of IDENTIFY_SYSTEM command. But it was not reflected into
several codes checking that result. Specifically though the number of
columns in the result was increased to 4, it was still compared with 3
in some replication codes.
Back-patch to 9.4 where the number of columns in IDENTIFY_SYSTEM
result was increased.
Report from Michael Paquier
Programs need execute permission on a DLL file to load it. MSYS
"install" ignores the mode argument, and our Cygwin build statically
links libpq into programs. That explains the lack of buildfarm trouble.
Back-patch to 9.0 (all supported versions).
The aboriginal sample placed connection parameters in
groupOfUniqueNames/uniqueMember. OpenLDAP, at least as early as version
2.4.23, rejects uniqueMember entries that do not conform to the syntax
for a distinguished name. Use device/description, which is free-form.
Back-patch to 9.4 for web site visibility.
Oversight in commit 7cbe57c34d.
Back-patch to 9.4, where that commit first appeared. In passing,
release-note the FDW API postcondition change from the same commit.
nice and we'll keep it in 9.5 but it'll take more time to iron out the
collateral damage on other queries and also on tools like
check_postgres.
revert dbe31616c9
revert 6513633b94
The old text explained what happened if we didn't have working int64
arithmetic. Since that case has been explicitly rejected by configure
since 8.4.3, documenting it in the 9.x branches can only produce confusion.