In addition, this path fills in a number of missing bits and pieces in
the parallel infrastructure. Paths and plans now have a parallel_aware
flag indicating whether whatever parallel-aware logic they have should
be engaged. It is believed that we will need this flag for a number of
path/plan types, not just sequential scans, which is why the flag is
generic rather than part of the SeqScan structures specifically.
Also, execParallel.c now gives parallel nodes a chance to initialize
their PlanState nodes from the DSM during parallel worker startup.
Amit Kapila, with a fair amount of adjustment by me. Review of previous
patch versions by Haribabu Kommi and others.
The patches committed as 6e71dd7ce9
and 3a1f8611f2 were developed in
parallel but dependent on each other in a way that I failed to
notice.
This patch to fix the problem was prepared by Amit Kapila.
By accident the replication origin was not set properly in
DecodeCommit(). That's bad because the origin is passed to the output
plugins origin filter, and accessible from the output plugin via
ReorderBufferTXN->origin_id. Accessing the origin of individual changes
worked before the fix, which is why this wasn't notices earlier.
Reported-By: Craig Ringer
Author: Craig Ringer
Discussion: CAMsr+YFhBJLp=qfSz3-J+0P1zLkE8zNXM2otycn20QRMx380gw@mail.gmail.com
Backpatch: 9.5, where replication origins where introduced
At least OpenBSD, NetBSD, and Windows don't support it. This repairs
pg_ctl for listen_addresses='0.0.0.0' and listen_addresses='::'. Since
pg_ctl prefers to test a Unix-domain socket, Windows users are most
likely to need this change. Back-patch to 9.1 (all supported versions).
This could change pg_ctl interaction with loopback-interface firewall
rules. Therefore, in 9.4 and earlier (released branches), activate the
change only on known-affected platforms.
Reported (bug #13611) and designed by Kondo Yuta.
Per discussion, the original name was a bit misleading, and
PQsslAttributeNames() seems more apropos. It's not quite too late to
change this in 9.5, so let's change it while we can.
Also, make sure that the pointer array is const, not only the pointed-to
strings.
Minor documentation wordsmithing while at it.
Lars Kanis, slight adjustments by me
Lookahead and lookbehind constraints aren't allowed to contain backrefs,
and parentheses within them are always considered non-capturing. Or so
says the manual. But the regexp parser forgot about these rules once
inside a parenthesized subexpression, so that constructs like (\w)(?=(\1))
were accepted (but then not correctly executed --- a case like this acted
like (\w)(?=\w), without any enforcement that the two \w's match the same
text). And in (?=((foo))) the innermost parentheses would be counted as
capturing parentheses, though no text would ever be captured for them.
To fix, properly pass down the "type" argument to the recursive invocation
of parse().
Back-patch to all supported branches; it was agreed that silent
misexecution of such patterns is worse than throwing an error, even though
new errors in minor releases are generally not desirable.
Commit 4a4e6893aa, which introduced this
mechanism, failed to account for the fact that the RECORD pseudo-type
uses transient typmods that are only meaningful within a single
backend. Transferring such tuples without modification between two
cooperating backends does not work. This commit installs a system
for passing the tuple descriptors over the same shm_mq being used to
send the tuples themselves. The two sides might not assign the same
transient typmod to any given tuple descriptor, so we must also
substitute the appropriate receiver-side typmod for the one used by
the sender. That adds some CPU overhead, but still seems better than
being unable to pass records between cooperating parallel processes.
Along the way, move the logic for handling multiple tuple queues from
tqueue.c to nodeGather.c; tqueue.c now provides a TupleQueueReader,
which reads from a single queue, rather than a TupleQueueFunnel, which
potentially reads from multiple queues. This change was suggested
previously as a way to make sure that nodeGather.c rather than tqueue.c
had policy control over the order in which to read from queues, but
it wasn't clear to me until now how good an idea it was. typmod
mapping needs to be performed separately for each queue, and it is
much simpler if the tqueue.c code handles that and leaves multiplexing
multiple queues to higher layers of the stack.
This introduces a simple encoding scheme to produce abbreviated keys:
pack as many bytes of each UUID as will fit into a Datum. On
little-endian machines, a byteswap is also performed; the abbreviated
comparator can therefore just consist of a simple 3-way unsigned integer
comparison.
The purpose of this change is to speed up sorting data on a column
of type UUID.
Peter Geoghegan
With include_realm=1 being set down in parse_hba_auth_opt, if multiple
options are passed on the pg_hba line, such as:
host all all 0.0.0.0/0 gss include_realm=0 krb_realm=XYZ.COM
We would mistakenly reset include_realm back to 1. Instead, we need to
set include_realm=1 up in parse_hba_line, prior to parsing any of the
additional options.
Discovered by Jeff McCormick during testing.
Bug introduced by 9a08841.
Back-patch to 9.5
Previously, negative values were always displayed in bytes, regardless
of how large they were.
Adrian Vondendriesch, reviewed by Julien Rouhaud and myself
The jsonb_path_ops code calculated hash values inconsistently in some cases
involving nested arrays and objects. This would result in queries possibly
not finding entries that they should find, when using a jsonb_path_ops GIN
index for the search. The problem cases involve JSONB values that contain
both scalars and sub-objects at the same nesting level, for example an
array containing both scalars and sub-arrays. To fix, reset the current
stack->hash after processing each value or sub-object, not before; and
don't try to be cute about the outermost level's initial hash.
Correcting this means that existing jsonb_path_ops indexes may now be
inconsistent with the new hash calculation code. The symptom is the same
--- searches not finding entries they should find --- but the specific
rows affected are likely to be different. Users will need to REINDEX
jsonb_path_ops indexes to make sure that all searches work as expected.
Per bug #13756 from Daniel Cheng. Back-patch to 9.4 where the faulty
logic was introduced.
Previously, plpython was in the habit of allocating a lot of stuff in
TopMemoryContext, and it was very slipshod about making sure that stuff
got cleaned up; in particular, use of TopMemoryContext as fn_mcxt for
function calls represents an unfixable leak, since we generally don't
know what the called function might have allocated in fn_mcxt. This
results in session-lifespan leakage in certain usage scenarios, as for
example in a case reported by Ed Behn back in July.
To fix, get rid of all the retail allocations in TopMemoryContext.
All long-lived allocations are now made in sub-contexts that are
associated with specific objects (either pl/python procedures, or
Python-visible objects such as cursors and plans). We can clean these
up when the associated object is deleted.
I went so far as to get rid of PLy_malloc completely. There were a
couple of places where it could still have been used safely, but on
the whole it was just an invitation to bad coding.
Haribabu Kommi, based on a draft patch by Heikki Linnakangas;
some further work by me
Up until now, the total amount of data that could be passed to a
background worker at startup was one datum, which can be a small as
4 bytes on some systems. That's enough to pass a dsm_handle or an
array index, but not much else. Add a bgw_extra flag to the
BackgroundWorker struct, allowing up to 128 bytes to be passed to
a new worker on any platform.
Use this to fix a problem I recently discovered with the parallel
context machinery added in 9.5: the master assigns each worker an
array index, and each worker subsequently assigns itself an array
index, and there's nothing to guarantee that the two sets of indexes
match, leading to chaos.
Normally, I would not back-patch the change to add bgw_extra, since it
is basically a feature addition. However, since 9.5 is still in beta
and there seems to be no other sensible way to repair the broken
parallel context machinery, back-patch to 9.5. Existing background
worker code can ignore the bgw_extra field without a problem, but
might need to be recompiled since the structure size has changed.
Report and patch by me. Review by Amit Kapila.
Rather than filling a temporary array and then copying values to the
output array, we can generate the required random permutation in-place
using the Fisher-Yates shuffle algorithm. This is shorter as well as
more efficient than before. It's pretty unlikely that anyone would
notice a speed improvement, but shorter code is better.
Nathan Wagner, edited a bit by me
The user can whitelist specified extension(s) in the foreign server's
options, whereupon we will treat immutable functions and operators of those
extensions as candidates to be sent for remote execution.
Whitelisting an extension in this way basically promises that the extension
exists on the remote server and behaves compatibly with the local instance.
We have no way to prove that formally, so we have to rely on the user to
get it right. But this seems like something that people can usually get
right in practice.
We might in future allow functions and operators to be whitelisted
individually, but extension granularity is a very convenient special case,
so it got done first.
The patch as-committed lacks any regression tests, which is unfortunate,
but introducing dependencies on other extensions for testing purposes
would break "make installcheck" scenarios, which is worse. I have some
ideas about klugy ways around that, but it seems like material for a
separate patch. For the moment, leave the problem open.
Paul Ramsey, hacked up a bit more by me
Fix some brain fade in commit a2dabf0e1dda93c8: erroneous variable names
in docs, rearrangements that made sentences less clear not more so,
undocumented and poorly-chosen-anyway API behaviors of subroutines,
bad grammar in error messages, copy-and-paste faults.
Albe Laurenz and Tom Lane
Commit a1480ec1d3 purported to fix the
problems with commit b2ccb5f4e6, but it
didn't completely fix them. The problem is that the checks were
performed in the wrong order, leading to a race condition. If the
sender attached, sent a message, and detached after the receiver
called shm_mq_get_sender and before the receiver called
shm_mq_counterparty_gone, we'd incorrectly return SHM_MQ_DETACHED
before all messages were read. Repair by reversing the order of
operations, and add a long comment explaining why this new logic is
(hopefully) correct.
Commit d1b7c1ffe7 introduced a mechanism
for serializing a ParamListInfo structure to be passed to a parallel
worker. However, this mechanism failed to handle external expanded
values, as pointed out by Noah Misch. Repair.
Moreover, plpgsql_param_fetch requires adjustment because the
serialization mechanism needs it to skip evaluating unused parameters
just as we would do when it is called from copyParamList, but params
== estate->paramLI in that case. To fix, make the bms_is_member test
in that function unconditional.
Finally, have setup_param_list set a new ParamListInfo field,
paramMask, to the parameters actually used in the expression, so that
we don't try to fetch those that are not needed when serializing a
parameter list. This isn't necessary for correctness, but it makes
the performance of the parallel executor code comparable to what we
do for cases involving cursors.
Design suggestions and extensive review by Noah Misch. Patch by me.
On insert the CheckForSerializableConflictIn() test was performed
before the page(s) which were going to be modified had been locked
(with an exclusive buffer content lock). If another process
acquired a relation SIReadLock on the heap and scanned to a page on
which an insert was going to occur before the page was so locked,
a rw-conflict would be missed, which could allow a serialization
anomaly to be missed. The window between the check and the page
lock was small, so the bug was generally not noticed unless there
was high concurrency with multiple processes inserting into the
same table.
This was reported by Peter Bailis as bug #11732, by Sean Chittenden
as bug #13667, and by others.
The race condition was eliminated in heap_insert() by moving the
check down below the acquisition of the buffer lock, which had been
the very next statement. Because of the loop locking and unlocking
multiple buffers in heap_multi_insert() a check was added after all
inserts were completed. The check before the start of the inserts
was left because it might avoid a large amount of work to detect a
serialization anomaly before performing the all of the inserts and
the related WAL logging.
While investigating this bug, other SSI bugs which were even harder
to hit in practice were noticed and fixed, an unnecessary check
(covered by another check, so redundant) was removed from
heap_update(), and comments were improved.
Back-patch to all supported branches.
Kevin Grittner and Thomas Munro
A lookbehind constraint is like a lookahead constraint in that it consumes
no text; but it checks for existence (or nonexistence) of a match *ending*
at the current point in the string, rather than one *starting* at the
current point. This is a long-requested feature since it exists in many
other regex libraries, but Henry Spencer had never got around to
implementing it in the code we use.
Just making it work is actually pretty trivial; but naive copying of the
logic for lookahead constraints leads to code that often spends O(N^2) time
to scan an N-character string, because we have to run the match engine
from string start to the current probe point each time the constraint is
checked. In typical use-cases a lookbehind constraint will be written at
the start of the regex and hence will need to be checked at every character
--- so O(N^2) work overall. To fix that, I introduced a third copy of the
core DFA matching loop, paralleling the existing longest() and shortest()
loops. This version, matchuntil(), can suspend and resume matching given
a couple of pointers' worth of storage space. So we need only run it
across the string once, stopping at each interesting probe point and then
resuming to advance to the next one.
I also put in an optimization that simplifies one-character lookahead and
lookbehind constraints, such as "(?=x)" or "(?<!\w)", into AHEAD and BEHIND
constraints, which already existed in the engine. This avoids the overhead
of the LACON machinery entirely for these rather common cases.
The net result is that lookbehind constraints run a factor of three or so
slower than Perl's for multi-character constraints, but faster than Perl's
for one-character constraints ... and they work fine for variable-length
constraints, which Perl gives up on entirely. So that's not bad from a
competitive perspective, and there's room for further optimization if
anyone cares. (In reality, raw scan rate across a large input string is
probably not that big a deal for Postgres usage anyway; so I'm happy if
it's linear.)
Commit b0b0d84b3d purported to make it
possible to relaunch workers using the same parallel context, but it had
an unpleasant race condition: we might reinitialize after the workers
have sent their last control message but before they have dettached the
DSM, leaving to crashes. Repair by introducing a new ParallelContext
operation, ReinitializeParallelDSM.
Adjust execParallel.c to use this new support, so that we can rescan a
Gather node by relaunching workers but without needing to recreate the
DSM.
Amit Kapila, with some adjustments by me. Extracted from latest parallel
sequential scan patch.
The original Gather code failed to mark a Gather node as not able to
do projection, but it couldn't, even though it did call initialize its
projection info via ExecAssignProjectionInfo. There doesn't seem to
be any good reason for this node not to have projection capability,
so clean things up so that it does. Without this, plans using Gather
nodes might need to carry extra Result nodes to do projection.
A bug in the original free space computation made it possible to
return a page which wasn't actually able to fit the item. Since the
insertion code isn't prepared to deal with PageAddItem failing, a PANIC
resulted ("failed to add BRIN tuple [to new page]"). Add a macro to
encapsulate the correct computation, and use it in
brin_getinsertbuffer's callers before calling that routine, to raise an
early error.
I became aware of the possiblity of a problem in this area while working
on ccc4c07499. There's no archived discussion about it, but it's
easy to reproduce a problem in the unpatched code with something like
CREATE TABLE t (a text);
CREATE INDEX ti ON t USING brin (a) WITH (pages_per_range=1);
for length in `seq 8000 8196`
do
psql -f - <<EOF
TRUNCATE TABLE t;
INSERT INTO t VALUES ('z'), (repeat('a', $length));
EOF
done
Backpatch to 9.5, where BRIN was introduced.
Further tweak commit_ts.c so that on a standby the state is completely
consistent with what that in the master, rather than behaving
differently in the cases that the settings differ. Now in standby and
master the module should always be active or inactive in lockstep.
Author: Petr Jelínek, with some further tweaks by Álvaro Herrera.
Backpatch to 9.5, where commit timestamps were introduced.
Discussion: http://www.postgresql.org/message-id/5622BF9D.2010409@2ndquadrant.com
Bernd Helmle complained that CreateReplicationSlot() was assigning the
same value to the same variable twice, so we could remove one of them.
Code inspection reveals that we can actually remove both assignments:
according to the author the assignment was there for beauty of the
strlen line only, and another possible fix to that is to put the strlen
in its own line, so do that.
To be consistent within the file, refactor all duplicated strlen()
calls, which is what we do elsewhere in the backend anyway. In
basebackup.c, snprintf already returns the right length; no need for
strlen afterwards.
Backpatch to 9.4, where replication slots were introduced, to keep code
identical. Some of this is older, but the patch doesn't apply cleanly
and it's only of cosmetic value anyway.
Discussion: http://www.postgresql.org/message-id/BE2FD71DEA35A2287EA5F018@eje.credativ.lan
If the counterparty writes some data into the queue and then detaches,
it's wrong to return SHM_MQ_DETACHED right away. If we do that, we
fail to read whatever was written.
The shm_mq mechanism was intended to optionally notice when the process
on the other end of the queue fails to attach to the queue. It does
this by allowing the user to pass a BackgroundWorkerHandle; if the
background worker in question is launched and dies without attaching
to the queue, then we know it never will. This logic works OK in
blocking mode, but when called with nowait = true we fail to notice
that this has happened due to an asymmetry in the logic. Repair.
Reported off-list by Rushabh Lathia. Patch by me.
Once upon a time we did not have a separate CREATEROLE privilege, and
CREATEUSER effectively meant SUPERUSER. When we invented CREATEROLE
(in 8.1) we also added SUPERUSER so as to have a less confusing keyword
for this role property. However, we left CREATEUSER in place as a
deprecated synonym for SUPERUSER, because of backwards-compatibility
concerns. It's still there and is still confusing people, as for example
in bug #13694 from Justin Catterson. 9.6 will be ten years or so later,
which surely ought to be long enough to end the deprecation and just
remove these old keywords. Hence, do so.
Commit 816e336f12 added the wrong error
check to async.c; sending restrictions is restricted to the leader,
not altogether unsafe.
Commit 3bd909b220 added ExecShutdownNode
to traverse the planstate tree and call shutdown functions, but made
a Gather node, the only node that actually has such a function, abort
the tree traversal, which is wrong.
Robert Haas
Tom Lane
Andres Freund
Noah Misch
Stephen Frost
Peter Eisentraut
Kevin Grittner
Alvaro Herrera