Since c7aba7c, the transform method used during parse analysis of a
subcripting construct has moved from transformAssignmentSubscripts() to
the per-type transform method (arrays or arbitrary types) the step that
checks for slicing support, but transformAssignmentSubscripts() has kept
traces of it. Removing it simplifies the code, so let's clean up all
that.
Author: Zhang Mingli
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/0d7041ac-c704-48ad-86fd-e05feddf08ed@Spark
Make reorderbuffer.h function declarations consistently use named
parameters. Also make sure that the declarations use names that match
corresponding names from function definitions in reorderbuffer.c. This
makes the definitions easier to follow, especially in the case of
functions that happen to have adjoining arguments of the same type.
This patch was written with help from clang-tidy. Specifically, its
"readability-inconsistent-declaration-parameter-name" check and its
"readability-named-parameter" check were used.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/3955318.1663377656@sss.pgh.pa.us
The function has a bool argument named "case_insensitive", but that was
spelled "case_sensitive" in the declaration. Make them consistent now
to avoid confusion in the future.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Michael Paquiër <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Backpatch: 10-
So far they were created below CacheMemoryContext. However, that's not
guaranteed to exist in all situations, leading to memory contexts created as
top-level contexts. There isn't actually a good reason anymore to create them
below CacheMemoryContext, so just creating them below TopMemoryContext seems
the best approach.
Reported-by: Reid Thompson <reid.thompson@crunchydata.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Author: "Drouvot, Bertrand" <bdrouvot@amazon.com>
Discussion: https://postgr.es/m/b948b729-42fe-f88c-2f4a-0e65d84c049b@amazon.com
Backpatch: 15-
Since Windows 10 1703, it is additionally necessary to pass a flag
called FILE_MAP_LARGE_PAGES to MapViewOfFile() to enable large pages at
map time. This flag is ignored on older versions of Windows, where
large pages should still be able to work properly without setting it.
Note that the flag would be set only for binaries that knew about it at
compile-time, which should be more or less all the Windows environments
these days.
Since 495ed0e, Windows 10 is the minimum version of Windows supported by
Postgres, making this change easy to reason about on HEAD. Per
discussion, no backpatch is done for the moment.
Reported-by: Okano Naoki
Author: Thomas Munro
Reviewed-by: Tom Lane, Michael Paquier, Julien Rouhaud
Discussion: https://postgr.es/m/17448-0a96583a67edb1f7@postgresql.org
Very occasionally the stats test failed due to the number of sessions not
being updated yet. Likely this requires that there is contention on the
database's stats entry. Solve this by forcing pending stats to be flushed
before fetching the stats.
I verified that there are no other test failures after making
pgstat_report_stat() only flush stats when force = true.
Per message from Tom Lane and buildfarm member crake.
Discussion: https://postgr.es/m/3428246.1663271992@sss.pgh.pa.us
Backpatch: 15-, where 5264add784 added the test
Treat arguments declared as RECORD as if that were a polymorphic type
(which it is, sort of), in that we substitute the actual argument type
while forming the function cache lookup key. This allows the specific
composite type to be known in some cases where it was not before,
at the cost of making a separate function cache entry for each named
composite type that's passed to the function during a session. The
particular symptom discussed in bug #17610 could be solved in other
more-efficient ways, but only at the cost of considerable development
work, and there are other cases where we'd still fail without this.
Per bug #17610 from Martin Jurča. Back-patch to v11 where we first
allowed plpgsql functions to be declared as taking type RECORD.
Discussion: https://postgr.es/m/17610-fb1eef75bf6c2364@postgresql.org
Unfortunately xlc 12.1 and earlier don't support -qvisibility. Therefore
be7c15b194 doesn't suffice to make extension libraries work without the
explicit mkldexport step removed in fe6a64a58a. While 12.1 is EOL, there is
some desire to leave buildfarm animals using it run a bit longer. But instead
of adding back the complicated mkldexport step, we can use -Wl,-b,expfull to
force all symbols to be exported.
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2490844.1663123546@sss.pgh.pa.us
For some reason we'd never decorated pg_v*printf() with
pg_attribute_printf() annotations. There is a convention for
how to label va_list-using printf functions (write zero for the
second argument), and we use that liberally elsewhere in the
code, but these core functions lacked it. It's not clear how
much useful checking the compiler can do for calls of these,
but we might as well add the annotations.
Also, sync win32security.c's log_error() with our normal convention
that pg_attribute_printf must be attached to a function's declaration
not definition. Apparently this file is only compiled with compilers
that aren't picky about that, but still it'd be better to be
consistent.
No back-patch since there's little reason to think we would catch
anything.
Discussion: https://postgr.es/m/3492412.1663283395@sss.pgh.pa.us
If the createdb tests run under the C locale, the database cluster
will be initialized with encoding SQL_ASCII. With the checks added in
c7db01e325, this will cause several
ICU-related tests to fail because SQL_ASCII is not supported by ICU.
To work around that, use initdb option -E UTF8 for those tests to get
past that check.
Check in CREATE DATABASE and initdb that the selected encoding is
supported by ICU. Before, they would pass but users would later get
an error from the server when they tried to use the database.
Also document that initdb sets the encoding to UTF8 by default if the
ICU locale provider is chosen.
Author: Marina Polyakova <m.polyakova@postgrespro.ru>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/6dd6db0984d86a51b7255ba79f111971@postgrespro.ru
I happened to notice that libpq_pipeline's private implementation
of pg_fatal lacked any pg_attribute_printf decoration. Indeed,
adding that turned up a mistake! We'd likely never have noticed
because the error exits in this code are unlikely to get hit,
but still, it's a bug.
We're so used to having the compiler check this stuff for us that
a printf-like function without pg_attribute_printf is a land mine.
I wonder if there is a way to detect such omissions.
Back-patch to v14 where this code came in.
There was a excessive structure, leading to somewhat disorganized
presentation of the information. Remove a few tags and reorder
paragraphs to make the text flow more easily. Also, reword some of it
to be more concise.
The bit about column list combination is not modified, other than to
remove an uninteresting (and IMO confusing and wrong) paragraph; I
intend to deal with it differently afterwards.
Backpatch to 15.
Discussion: https://postgr.es/m/20220913121138.yn7ekkfysxzhkm2u@alvherre.pgsql
Commit 31dcfae83 changed one pg_resetwal output string, and a
corresponding test in pg_upgrade, without sufficient thought for
the consequences. We can't change that output without creating
hazards for cross-version upgrades, since pg_upgrade needs to be able
to read the output of several different versions of pg_resetwal.
There may well be external tools with the same requirement.
For the moment, just revert those two changes. What we really
ought to do here is have a separate, stable, easily machine-readable
output format for pg_resetwal and pg_controldata, as proposed
years ago by Alvaro. Once that's in place and tools no longer
need to depend on the exact spelling of the human-readable output,
we can put back this change.
Discussion: https://postgr.es/m/fbea8c6f-415a-bad9-c3de-969c40d08a84@dunslane.net
After commit cc2c7d65fc added this flag,
failure to reset it caused assertion failures. In non-assert builds, it
made the system fail to achieve the objectives listed in that commit;
chiefly, we might emit a spurious log message. Back-patch to v15, where
that commit first appeared.
Bharath Rupireddy and Kyotaro Horiguchi. Reviewed by Dilip Kumar,
Nathan Bossart and Michael Paquier. Reported by Dilip Kumar.
Discussion: https://postgr.es/m/CAFiTN-sE3ry=ycMPVtC+Djw4Fd7gbUGVv_qqw6qfzp=JLvqT3g@mail.gmail.com
Commit ecaf7c5df5 removed gram.h from the backend's generated-headers
target. In LLVM builds, this leads to loss of dependency information
when generating .bc files. To fix, add a rule that mirrors ad-hoc .o
dependencies for .bc files as well.
Per cfbot (no buildfarm failures reported)
Analysis by Tom Lane and Andres Freund
Proposed fix by Andres Freund
Discussion: https://www.postgresql.org/message-id/20220914210427.y26tkagmxo5wwbvp%40awork3.anarazel.de
Referring to the WAL as just "log" invites confusion with the
postmaster log, so avoid doing that in docs and error messages.
Also shorten "WAL segment file" to just "WAL file" in various
places.
Bharath Rupireddy, reviewed by Nathan Bossart and Kyotaro Horiguchi
Discussion: https://postgr.es/m/CALj2ACUeXa8tDPaiTLexBDMZ7hgvaN+RTb957-cn5qwv9zf-MQ@mail.gmail.com
In 29f45e299, we added support for optimizing the execution of NOT
IN(values) by using a hash table instead of a linear search over the
array. That commit neglected to update the header comment for
convert_saop_to_hashed_saop() to mention this fact. Here we fix that.
Author: James Coleman
Discussion: https://postgr.es/m/CAAaqYe99NUpAPcxgchGstgM23fmiGjqQPot8627YgkBgNt=BfA@mail.gmail.com
Backpatch-through: 15, where 29f45e299 was added.
Various bits of code were declaring signal handlers manually,
using "int signum" or variants of that. We evidently have no
platforms where that's actually wrong, but let's use our
SIGNAL_ARGS macro everywhere anyway. If nothing else, it's
good for finding signal handlers easily.
No need for back-patch, since this is just cosmetic AFAICS.
Discussion: https://postgr.es/m/2684964.1663167995@sss.pgh.pa.us
Before, each documentation target that built something from
postgres.sgml ran xmllint first to validate the input. Here, we
change it so that the validation only runs once and produces an output
file, and all the other targets build from that output file. This
avoids redundant work when building multiple documentation targets
(such as html and man).
Also, when we run xmllint, we can resolve entities (included files).
This helps with tools that don't support vpath builds, such as
dbtoepub.
All this also organizes the make targets a bit better for implementing
equivalent steps in meson.
Discussion: https://www.postgresql.org/message-id/e3ae16de-c9f9-f559-2d11-70b1342ae3d1@enterprisedb.com
In pg_receivewal, compressed output is only flushed on clean exits. The
reason to support SIGTERM as well as SIGINT (which is currently handled)
is that pg_receivewal might well be running as a daemon, and systemd's
default KillSignal is SIGTERM.
Since pg_recvlogical is also supposed to run as a daemon, teach it about
SIGTERM as well and update the documentation to match. While in there,
change pg_receivewal's time_to_stop to be sig_atomic_t like it is in
pg_recvlogical.
Author: Christoph Berg <myon@debian.org>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/Yvo/5No5S0c4EFMj@msg.df7cb.de
This appears to be a merge mistake in 96ef3237bf. We could put it
back the way it was before JSON_TABLE and it'd be two lines shorter, but
it's likely that JSON_TABLE will be back and will prefer things this
way. It makes no other difference in practice.
Backpatch to 15.
Reported by Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAr4nOcNQskC4oBEZN4S+4heJ=1ch_ZKOxU+_Ef-FQSf-g@mail.gmail.com
The tlist of the EvalPlanQual outer plan for a ForeignScan node is
adjusted to produce a tuple whose descriptor matches the scan tuple slot
for the ForeignScan node. But in the case where the outer plan contains
an extra Sort node, if the new tlist contained columns required only for
evaluating PlaceHolderVars or columns required only for evaluating local
conditions, this would cause setrefs.c to fail with the error.
The cause of this is that when creating the outer plan by injecting the
Sort node into an alternative local join plan that could emit such extra
columns as well, we fail to arrange for the outer plan to propagate them
up through the Sort node, causing setrefs.c to fail to match up them in
the new tlist to what is available from the outer plan. Repair.
Per report from Alexander Pyhalov.
Richard Guo and Etsuro Fujita, reviewed by Alexander Pyhalov and Tom Lane.
Backpatch to all supported versions.
Discussion: http://postgr.es/m/cfb17bf6dfdf876467bd5ef533852d18%40postgrespro.ru
The zlib documentation mentions the values supported for the compression
strategy, but this code has been using a hardcoded value of 0 rather
than Z_DEFAULT_STRATEGY. This commit adjusts the code to use
Z_DEFAULT_STRATEGY.
Backpatch down to where this code has been added to ease the backport of
any future patch touching this area.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/1400032.1662217889@sss.pgh.pa.us
Backpatch-through: 10
The oldest vendor-shipped Perl in the buildfarm is 5.14.2, which is
the last version that Debian Wheezy shipped. That OS is EOL, but we
keep it running because there is no other convenient way to test certain
non-mainstream 32-bit platforms. There is no bugfix in the 5.14.2 release
that is required, and yet it's also not the latest minor release --
that would be 5.14.4. To clarify the situation, we have thus arranged the
buildfarm to test 5.14.0. That allows configure scripts and documentation
to state 5.14 without fine print.
The MSVC build didn't check the version, since our previous minimum 5.8.3
was considered too old to check for on Windows. We will need a check for
Windows sometime during the v16 cycle, but that could be rendered moot
by the impending Meson conversion, so it seems safe to just document
the requirement for now.
Reviewed by Tom Lane
Discussion: https://www.postgresql.org/message-id/20220902181553.ev4pgzhubhdkguuv@awork3.anarazel.de
This header is semi-private, being used only in files related to
raw parsing, so move to the backend directory where those files
live. This allows removal of Makefile rules that symlink gram.h to
src/include/parser, since gramparse.h can now include gram.h from
within the same directory. This has the side-effect of no longer
installing gram.h and gramparse.h, but there doesn't seem to be a
good reason to continue doing so.
Per suggestion from Andres Freund and Peter Eisentraut
Discussion: https://www.postgresql.org/message-id/20220904181759.px6uosll6zbxcum5%40awork3.anarazel.de
PG_COMPRESSION_OPTION_LEVEL is removed from the compression
specification logic, and instead the compression level is always
assigned with each library's default if nothing is directly given. This
centralizes the checks on the compression methods supported by a given
build, and always assigns a default compression level when parsing a
compression specification. This results in complaining at an earlier
stage than previously if a build supports a compression method or not,
aka when parsing a specification in the backend or the frontend, and not
when processing it. zstd, lz4 and zlib are able to handle in their
respective routines setting up the compression level the case of a
default value, hence the backend or frontend code (pg_receivewal or
pg_basebackup) has now no need to know what the default compression
level should be if nothing is specified: the logic is now done so as the
specification parsing assigns it. It can also be enforced by passing
down a "level" set to the default value, that the backend will accept
(the replication protocol is for example able to handle a command like
BASE_BACKUP (COMPRESSION_DETAIL 'gzip:level=-1')).
This code simplification fixes an issue with pg_basebackup --gzip
introduced by ffd5365, where the tarball of the streamed WAL segments
would be created as of pg_wal.tar.gz with uncompressed contents, while
the intention is to compress the segments with gzip at a default level.
The origin of the confusion comes from the handling of the default
compression level of gzip (-1 or Z_DEFAULT_COMPRESSION) and the value of
0 was getting assigned, which is what walmethods.c would consider
as equivalent to no compression when streaming WAL segments with its tar
methods. Assigning always the compression level removes the confusion
of some code paths considering a value of 0 set in a specification as
either no compression or a default compression level.
Note that 010_pg_basebackup.pl has to be adjusted to skip a few tests
where the shape of the compression detail string for client and
server-side compression was checked using gzip. This is a result of the
code simplification, as gzip specifications cannot be used if a build
does not support it.
Reported-by: Tom Lane
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/1400032.1662217889@sss.pgh.pa.us
Backpatch-through: 15
guc.c has grown to be one of our largest .c files, making it
a bottleneck for compilation. It's also acquired a bunch of
knowledge that'd be better kept elsewhere, because of our not
very good habit of putting variable-specific check hooks here.
Hence, split it up along these lines:
* guc.c itself retains just the core GUC housekeeping mechanisms.
* New file guc_funcs.c contains the SET/SHOW interfaces and some
SQL-accessible functions for GUC manipulation.
* New file guc_tables.c contains the data arrays that define the
built-in GUC variables, along with some already-exported constant
tables.
* GUC check/assign/show hook functions are moved to the variable's
home module, whenever that's clearly identifiable. A few hard-
to-classify hooks ended up in commands/variable.c, which was
already a home for miscellaneous GUC hook functions.
To avoid cluttering a lot more header files with #include "guc.h",
I also invented a new header file utils/guc_hooks.h and put all
the GUC hook functions' declarations there, regardless of their
originating module. That allowed removal of #include "guc.h"
from some existing headers. The fallout from that (hopefully
all caught here) demonstrates clearly why such inclusions are
best minimized: there are a lot of files that, for example,
were getting array.h at two or more levels of remove, despite
not having any connection at all to GUCs in themselves.
There is some very minor code beautification here, such as
renaming a couple of inconsistently-named hook functions
and improving some comments. But mostly this just moves
code from point A to point B and deals with the ensuing
needs for #include adjustments and exporting a few functions
that previously weren't exported.
Patch by me, per a suggestion from Andres Freund; thanks also
to Michael Paquier for the idea to invent guc_funcs.c.
Discussion: https://postgr.es/m/587607.1662836699@sss.pgh.pa.us
Commit 3a0e385048 introduced a new path for unauthenticated bytes from
the client certificate to be printed unescaped to the logs. There are a
handful of these already, but it doesn't make sense to keep making the
problem worse. \x-escape any unprintable bytes.
The test case introduces a revoked UTF-8 certificate. This requires the
addition of the `-utf8` flag to `openssl req`. Since the existing
certificates all use an ASCII subset, this won't modify the existing
certificates' subjects if/when they get regenerated; this was verified
experimentally with
$ make sslfiles-clean
$ make sslfiles
Unfortunately the test can't be run in the CI yet due to a test timing
issue; see 55828a6b60.
Author: Jacob Champion <jchampion@timescale.com>
Discussion: https://www.postgresql.org/message-id/CAAWbhmgsvHrH9wLU2kYc3pOi1KSenHSLAHBbCVmmddW6-mc_=w@mail.gmail.com
Locale options can be specified for initdb, createdb, and CREATE
DATABASE. In initdb, it has always been possible to specify --locale
and then some --lc-* option to override a category. CREATE DATABASE
and createdb didn't allow that, requiring either the all-categories
option or only per-category options. In
f2553d4306, this was changed in CREATE
DATABASE (perhaps by accident?) to be more like the initdb behavior,
but createdb still had the old behavior.
Now we change createdb to match the behavior of CREATE DATABASE and
initdb, and also update the documentation of CREATE DATABASE to match
the new behavior, which was not done in the above commit.
Author: Marina Polyakova <m.polyakova@postgrespro.ru>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://www.postgresql.org/message-id/7c99c132dc9c0ac630e0127f032ac480@postgrespro.ru
The two strings are already a single palloc'd chunk, not freed; there's
no reason to allocate separate copies that have the same lifetime.
This code is only called in short-lived memory contexts (except in some
cases in TopTransactionContext, which is still short-lived enough not to
really matter), and typically only for short arrays, so the memory or
computation saved is likely negligible. However, let's fix it to avoid
leaving a bad example of code to copy. This is the only place I could
find where we're doing this with makeDefElem().
Reported-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/20220909142050.3vv2hjekppk265dd@alvherre.pgsql
Commit d8594d123 updated the list of non-spacing codepoints used
for calculating display width, but in doing so inadvertently removed
some, since the script used for that commit only considered combining
characters.
For complete coverage for zero-width characters, include codepoints in
the category Cf (Format). To reflect the wider purpose, also rename files
and update comments that referred specifically to combining characters.
Some of these ranges have been missing since v12, but due to lack of
field complaints it was determined not important enough to justify adding
special-case logic the backbranches.
Kyotaro Horiguchi
Report by Pavel Stehule
Discussion: https://www.postgresql.org/message-id/flat/CAFj8pRBE8yvpQ0FSkPCoe0Ny1jAAsAQ6j3qMgVwWvkqAoaaNmQ%40mail.gmail.com
Peter Geoghegan
Michael Paquier
Andres Freund
Peter Eisentraut
Tom Lane
Alvaro Herrera
Noah Misch
John Naylor
David Rowley
Daniel Gustafsson
Etsuro Fujita
Amit Kapila