In commit 1f39a1c06 I made PQisBusy consider conn->write_failed, but
that is now looking like complete brain fade. In the first place, the
logic is quite wrong: it ought to be like "and not" rather than "or".
This meant that once we'd gotten into a write_failed state, PQisBusy
would always return true, probably causing the calling application to
iterate its loop until PQconsumeInput returns a hard failure thanks
to connection loss. That's not what we want: the intended behavior
is to return an error PGresult, which the application probably has
much cleaner support for.
But in the second place, checking write_failed here seems like the
wrong thing anyway. The idea of the write_failed mechanism is to
postpone handling of a write failure until we've read all we can from
the server; so that flag should not interfere with input-processing
behavior. (Compare 7247e243a.) What we *should* check for is
status = CONNECTION_BAD, ie, socket already closed. (Most places that
close the socket don't touch asyncStatus, but they do reset status.)
This primarily ensures that if PQisBusy() returns true then there is
an open socket, which is assumed by several call sites in our own
code, and probably other applications too.
While at it, fix a nearby thinko in libpq's my_sock_write: we should
only consult errno for res < 0, not res == 0. This is harmless since
pqsecure_raw_write would force errno to zero in such a case, but it
still could confuse readers.
Noted by Andres Freund. Backpatch to v12 where 1f39a1c06 came in.
Discussion: https://postgr.es/m/20220211011025.ek7exh6owpzjyudn@alap3.anarazel.de
createplan.c tries to save a runtime projection step by specifying
a scan plan node's output as being exactly the table's columns, or
index's columns in the case of an index-only scan, if there is not a
reason to do otherwise. This logic did not previously pay attention
to whether an index's columns are returnable. That worked, sort of
accidentally, until commit 9a3ddeb51 taught setrefs.c to reject plans
that try to read a non-returnable column. I have no desire to loosen
setrefs.c's new check, so instead adjust use_physical_tlist() to not
try to optimize this way when there are non-returnable column(s).
Per report from Ryan Kelly. Like the previous patch, back-patch
to all supported branches.
Discussion: https://postgr.es/m/CAHUie24ddN+pDNw7fkhNrjrwAX=fXXfGZZEHhRuofV_N_ftaSg@mail.gmail.com
"pg_ctl stop/restart" checked that the postmaster PID is valid just
once, as a side-effect of sending the stop signal, and then would
wait-till-timeout for the postmaster.pid file to go away. This
neglects the case wherein the postmaster dies uncleanly after we
signal it. Similarly, once "pg_ctl promote" has sent the signal,
it'd wait for the corresponding on-disk state change to occur
even if the postmaster dies.
I'm not sure how we've managed not to notice this problem, but it
seems to explain slow execution of the 017_shm.pl test script on AIX
since commit 4fdbf9af5, which added a speculative "pg_ctl stop" with
the idea of making real sure that the postmaster isn't there. In the
test steps that kill-9 and then restart the postmaster, it's possible
to get past the initial signal attempt before kill() stops working
for the doomed postmaster. If that happens, pg_ctl waited till
PGCTLTIMEOUT before giving up ... and the buildfarm's AIX members
have that set very high.
To fix, include a "kill(pid, 0)" test (similar to what
postmaster_is_alive uses) in these wait loops, so that we'll
give up immediately if the postmaster PID disappears.
While here, I chose to refactor those loops out of where they were.
do_stop() and do_restart() can perfectly well share one copy of the
wait-for-stop loop, and it seems desirable to put a similar function
beside that for wait-for-promote.
Back-patch to all supported versions, since pg_ctl's wait logic
is substantially identical in all, and we're seeing the slow test
behavior in all branches.
Discussion: https://postgr.es/m/20220210023537.GA3222837@rfd.leadboat.com
Commit 09cf1d522 taught schedule_alarm() to not do anything if
the next requested event is after when we expect the next interrupt
to fire. However, if somehow an interrupt gets lost, we'll continue
to not do anything indefinitely, even after the "next interrupt" time
is obviously in the past. Thus, one missed interrupt can break
timeout scheduling for the life of the session. Michael Harris
reported a scenario where a bug in a user-defined function caused this
to happen, so you don't even need to assume kernel bugs exist to think
this is worth fixing. We can make things more robust at little cost
by detecting the case where signal_due_at is before "now" and forcing
a new setitimer call to occur. This isn't a completely bulletproof
fix of course; but in our typical usage pattern where we frequently set
timeouts and clear them before they are reached, the interrupt will
get re-enabled after at most one timeout interval, which with a little
luck will be before we really need it.
While here, let's mark signal_due_at as volatile, since the signal
handler can both examine and set it. I'm not sure there's any
actual risk given that signal_pending is already volatile, but
it's surely questionable.
Backpatch to v14 where this logic came in.
Michael Harris and Tom Lane
Discussion: https://postgr.es/m/CADofcAWbMrvgwSMqO4iG_iD3E2v8ZUrC-_crB41my=VMM02-CA@mail.gmail.com
The connection strings in the SSL client tests were using the host
set up from Cluster.pm which is a temporary pathname. When SNI is
enabled we pass the host to OpenSSL in order to set the server name
indication ClientHello extension via SSL_set_tlsext_host_name.
OpenSSL doesn't validate the hostname apart from checking the max
length, but LibreSSL checks for RFC 5890 conformance which results
in errors during testing as the pathname from Cluster.pm is not a
valid hostname.
Fix by setting the host explicitly to localhost, as that's closer
to the intent of the test.
Backpatch through 14 where SNI support came in.
Reported-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/17391-304f81bcf724b58b@postgresql.org
Backpatch-through: 14
Commit 6a2a70a02 supposed that any platform having <sys/epoll.h>
would also have <sys/signalfd.h>. It turns out there are still a
few people using platforms where that's not so, so we'd better make
a separate configure probe for it. But since it took this long to
notice, I'm content with the decision to not have a separate code
path for epoll-only machines; we'll just fall back to using poll()
for these stragglers.
Per gripe from Gabriela Serventi. Back-patch to v14 where this
code came in.
Discussion: https://postgr.es/m/CAHOHWE-JjJDfcYuLAAEO7Jk07atFAU47z8TzHzg71gbC0aMy=g@mail.gmail.com
Recent versions of Devel::PPPort try to redefine eval_pv() to
dodge a bug in pre-5.31 Perl versions. Unfortunately the redefinition
fails on compilers that don't support statements nested within
expressions. However, we aren't actually interested in this bug fix,
since we always call eval_pv() with croak_on_error = FALSE.
So, until there's an upstream fix for this breakage, just comment
out the macro to revert to the older behavior.
Per report from Wei Sun, as well as previous buildfarm failure
on pademelon (which I'd unfortunately not looked at carefully
enough to understand the cause). Back-patch to all supported
versions, since we're using the same ppport.h in all.
Discussion: https://postgr.es/m/tencent_2EFCC8BA0107B6EC0F97179E019A8A43C806@qq.com
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=pademelon&dt=2022-02-02%2001%3A22%3A58
There are two Asserts in nodeMergejoin.c that are reachable if
the input data is not in the expected order. This seems way too
fragile. Alexander Lakhin reported a case where the assertions
could be triggered with misconfigured foreign-table partitions,
and bitter experience with unstable operating system collation
definitions suggests another easy route to hitting them. Neither
Assert is in a place where we can't afford one more test-and-branch,
so replace 'em with plain test-and-elog logic.
Per bug #17395. While the reported symptom is relatively recent,
collation changes could happen anytime, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/17395-8c326292078d1a57@postgresql.org
We assume that direct-modify ForeignScan nodes cannot be re-evaluated
during EvalPlanQual processing, but the rework for inherited
UPDATE/DELETE in commit 86dc90056 changed things, without considering
that, so that such ForeignScan nodes get called as part of the
EvalPlanQual subtree during EvalPlanQual processing in the case of an
inherited UPDATE/DELETE where the inheritance set contains foreign
target relations. To avoid re-evaluating such ForeignScan nodes during
EvalPlanQual processing, commit c3928b467 modified nodeForeignscan.c,
but the assumption made there that ExecForeignScan() should never be
called for such ForeignScan nodes during EvalPlanQual processing turned
out to be wrong in some cases, leading to a segmentation fault or a
"cannot re-evaluate a Foreign Update or Delete during EvalPlanQual"
error.
Fix by modifying nodeForeignscan.c further to avoid re-evaluating such
ForeignScan nodes even in ExecForeignScan()/ExecReScanForeignScan()
during EvalPlanQual processing. Since this makes non-reachable the
test-and-elog added to ForeignNext() by commit c3928b467 that produced
the aforesaid error, convert the test-and-elog to an Assert.
Per bug #17355 from Alexander Lakhin. Back-patch to v14 where both
commits came in.
Patch by me, reviewed and tested by Alexander Lakhin and Amit Langote.
Discussion: https://postgr.es/m/17355-de8e362eb7001a96@postgresql.org
ppport.h was only updated in 05798c9f7f (master). Unfortunately my commit
c89f409749 uses PERL_VERSION_LT which came in with that update. Breaking most
buildfarm animals.
I should have noticed that...
We might want to backpatch the ppport update instead, but for now lets get the
buildfarm green again.
Discussion: https://postgr.es/m/20220131015130.shn6wr2fzuymerf6@alap3.anarazel.de
Backpatch: 10-14, master doesn't need it
For older versions we need our own copy of perl's setlocale(), because it was
not exposed (why we need the setlocale in the first place is explained in
plperl_init_interp) . The copy stopped working in 5.28, as some of the used
macros are not public anymore. But Perl_setlocale is available in 5.28, so
use that.
Author: Victor Wagner <vitus@wagner.pp.ru>
Reviewed-By: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://postgr.es/m/20200501134711.08750c5f@antares.wagner.home
Backpatch: all versions
Although select_common_type() has a failure-return convention, an
apparent successful return just provides a type OID that *might* work
as a common supertype; we've not validated that the required casts
actually exist. In the mainstream use-cases that doesn't matter,
because we'll proceed to invoke coerce_to_common_type() on each input,
which will fail appropriately if the proposed common type doesn't
actually work. However, a few callers didn't read the (nonexistent)
fine print, and thought that if they got back a nonzero OID then the
coercions were sure to work.
This affects in particular the recently-added "anycompatible"
polymorphic types; we might think that a function/operator using
such types matches cases it really doesn't. A likely end result
of that is unexpected "ambiguous operator" errors, as for example
in bug #17387 from James Inform. Another, much older, case is that
the parser might try to transform an "x IN (list)" construct to
a ScalarArrayOpExpr even when the list elements don't actually have
a common supertype.
It doesn't seem desirable to add more checking to select_common_type
itself, as that'd just slow down the mainstream use-cases. Instead,
write a separate function verify_common_type that performs the
missing checks, and add a call to that where necessary. Likewise add
verify_common_type_from_oids to go with select_common_type_from_oids.
Back-patch to v13 where the "anycompatible" types came in. (The
symptom complained of in bug #17387 doesn't appear till v14, but
that's just because we didn't get around to converting || to use
anycompatible till then.) In principle the "x IN (list)" fix could
go back all the way, but I'm not currently convinced that it makes
much difference in real-world cases, so I won't bother for now.
Discussion: https://postgr.es/m/17387-5dfe54b988444963@postgresql.org
c532d15 has split the logic of COPY commands into multiple files, one
change being to move the internals of BeginCopy() to BeginCopyTo().
Originally the code was written so as we'd switch back-and-forth between
the current execution memory context and the dedicated memory context
for the COPY command, and this refactoring has introduced an extra
switch to the current memory context from the COPY context once
BeginCopyTo() is done with the past logic coming from BeginCopy().
The code was correctly doing the analyze, rewrite and planning phases in
the COPY context, but it was not assigning "copy_file" (FILE* used when
copying to a source file) and "filename" in the COPY context, making the
COPY status data inconsistent.
Author: Bharath Rupireddy
Reviewed-by: Japin Li
Discussion: https://postgr.es/m/CALj2ACWvVa69foi9jhHFY=2BuHxAoYboyE+vXQTARwxZcJnVrQ@mail.gmail.com
Backpatch-through: 14
When pg_log_backend_memory_contexts() is executed, the target backend
should use LOG_SERVER_ONLY to log its memory contexts, to prevent them
from being sent to its connected client regardless of client_min_messages.
But previously the backend unexpectedly used LOG to log the message
"logging memory contexts of PID %d" and it could be sent to the client.
This is a bug in memory context logging.
To fix the bug, this commit changes that message so that it's logged with
LOG_SERVER_ONLY.
Back-patch to v14 where pg_log_backend_memory_contexts() was added.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Atsushi Torikoshi
Discussion: https://postgr.es/m/82c12f36-86f7-5e72-79af-7f5c37f6cad7@oss.nttdata.com
Commit 8431e296ea reworked ProcArrayApplyRecoveryInfo to sort XIDs
before adding them to KnownAssignedXids. But the XIDs are sorted using
xidComparator, which compares the XIDs simply as uint32 values, not
logically. KnownAssignedXidsAdd() however expects XIDs in logical order,
and calls TransactionIdFollowsOrEquals() to enforce that. If there are
XIDs for which the two orderings disagree, an error is raised and the
recovery fails/restarts.
Hitting this issue is fairly easy - you just need two transactions, one
started before the 4B limit (e.g. XID 4294967290), the other sometime
after it (e.g. XID 1000). Logically (4294967290 <= 1000) but when
compared using xidComparator we try to add them in the opposite order.
Which makes KnownAssignedXidsAdd() fail with an error like this:
ERROR: out-of-order XID insertion in KnownAssignedXids
This only happens during replica startup, while processing RUNNING_XACTS
records to build the snapshot. Once we reach STANDBY_SNAPSHOT_READY, we
skip these records. So this does not affect already running replicas,
but if you restart (or create) a replica while there are transactions
with XIDs for which the two orderings disagree, you may hit this.
Long-running transactions and frequent replica restarts increase the
likelihood of hitting this issue. Once the replica gets into this state,
it can't be started (even if the old transactions are terminated).
Fixed by sorting the XIDs logically - this is fine because we're dealing
with normal XIDs (because it's XIDs assigned to backends) and from the
same wraparound epoch (otherwise the backends could not be running at
the same time on the primary node). So there are no problems with the
triangle inequality, which is why xidComparator compares raw values.
Investigation and root cause analysis by Abhijit Menon-Sen. Patch by me.
This issue is present in all releases since 9.4, however releases up to
9.6 are EOL already so backpatch to 10 only.
Reviewed-by: Abhijit Menon-Sen
Reviewed-by: Alvaro Herrera
Backpatch-through: 10
Discussion: https://postgr.es/m/36b8a501-5d73-277c-4972-f58a4dce088a%40enterprisedb.com
Perl instances on some msys toolchains (e.g. UCRT64) have their
configured osname set to 'MSWin32' rather than 'msys'. The test for
the msys2 platform is adjusted accordingly.
Backpatch to release 14.
For authentication method cert, clientcert=verify-full is implied. But
the pg_hba_file_rules entry would incorrectly show clientcert=verify-ca.
Per bug #17354
Reported-By: Feike Steenbergen
Reviewed-By: Jonathan Katz
Backpatch-through: 12
This reverts commits 6051857fc and ed52c3707, but only in the back
branches. Further testing has shown that while those changes do fix
some things, they also break others; in particular, it looks like
walreceivers fail to detect walsender-initiated connection close
reliably if the walsender shuts down this way. We'll keep trying to
improve matters in HEAD, but it now seems unwise to push these changes
into stable releases.
Discussion: https://postgr.es/m/CA+hUKG+OeoETZQ=Qw5Ub5h3tmwQhBmDA=nuNO3KG=zWfUypFAw@mail.gmail.com
8edd0e794 added some code to remove Append and MergeAppend nodes when they
contained a single child node. As it turned out, this was unsafe to do
when the Append/MergeAppend was parallel_aware and the child node was not.
Removing the Append/MergeAppend, in this case, could lead to the child plan
being called multiple times by parallel workers when it was unsafe to do
so.
Here we fix this by just not removing the Append/MergeAppend when the
parallel_aware flag of the parent and child node don't match.
Reported-by: Yura Sokolov
Bug: #17335
Discussion: https://postgr.es/m/b59605fecb20ba9ea94e70ab60098c237c870628.camel%40postgrespro.ru
Backpatch-through: 12, where 8edd0e794 was first introduced
In logical replication mode, a WalSender is supposed to be able
to execute any regular SQL command, as well as the special
replication commands. Poor design of the replication-command
parser caused it to fail in various cases, notably:
* semicolons embedded in a command, or multiple SQL commands
sent in a single message;
* dollar-quoted literals containing odd numbers of single
or double quote marks;
* commands starting with a comment.
The basic problem here is that we're trying to run repl_scanner.l
across the entire input string even when it's not a replication
command. Since repl_scanner.l does not understand all of the
token types known to the core lexer, this is doomed to have
failure modes.
We certainly don't want to make repl_scanner.l as big as scan.l,
so instead rejigger stuff so that we only lex the first token of
a non-replication command. That will usually look like an IDENT
to repl_scanner.l, though a comment would end up getting reported
as a '-' or '/' single-character token. If the token is a replication
command keyword, we push it back and proceed normally with repl_gram.y
parsing. Otherwise, we can drop out of exec_replication_command()
without examining the rest of the string.
(It's still theoretically possible for repl_scanner.l to fail on
the first token; but that could only happen if it's an unterminated
single- or double-quoted string, in which case you'd have gotten
largely the same error from the core lexer too.)
In this way, repl_gram.y isn't involved at all in handling general
SQL commands, so we can get rid of the SQLCmd node type. (In
the back branches, we can't remove it because renumbering enum
NodeTag would be an ABI break; so just leave it sit there unused.)
I failed to resist the temptation to clean up some other sloppy
coding in repl_scanner.l while at it. The only externally-visible
behavior change from that is it now accepts \r and \f as whitespace,
same as the core lexer.
Per bug #17379 from Greg Rychlewski. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17379-6a5c6cfb3f1f5e77@postgresql.org
Without this, we get odd behavior when the previous cycle of
lexing exited in a non-default exclusive state. Every other
copy of this code is aware that it has to do BEGIN(INITIAL),
but repl_scanner.l did not get that memo.
The real-world impact of this is probably limited, since most
replication clients would abandon their connection after getting
a syntax error. Still, it's a bug.
This mistake is old, so back-patch to all supported branches.
Discussion: https://postgr.es/m/1874781.1643035952@sss.pgh.pa.us
Commit 6df7a9698 wrote appendPQExpBuffer where it should have
written printfPQExpBuffer. This resulted in re-issuing the
previous query along with the desired one, which very accidentally
had no negative consequences except for some wasted cycles.
Back-patch to v14 where that came in.
Discussion: https://postgr.es/m/1714711.1642962663@sss.pgh.pa.us
In the normal configuration where GEQO_DEBUG isn't defined,
recent clang versions have started to complain that geqo_main.c
accumulates the edge_failures count but never does anything
with it. As a minimal back-patchable fix, insert a void cast
to silence this warning. (I'd speculated about ripping out the
GEQO_DEBUG logic altogether, but I don't think we'd wish to
back-patch that.)
Per recently-established project policy, this is a candidate
for back-patching into out-of-support branches: it suppresses
an annoying compiler warning but changes no behavior. Hence,
back-patch all the way to 9.2.
Discussion: https://postgr.es/m/CA+hUKGLTSZQwES8VNPmWO9AO0wSeLt36OCPDAZTccT1h7Q7kTQ@mail.gmail.com
In sort_inner_and_outer we iterate a list of PathKey elements, but the
variable is declared as (List *). This mistake is benign, because we
only pass the pointer to lcons() and never dereference it.
This exists since ~2004, but it's confusing. So fix and backpatch to all
supported branches.
Backpatch-through: 10
Discussion: https://postgr.es/m/bf3a6ea1-a7d8-7211-0669-189d5c169374%40enterprisedb.com
The syscache lookup may return NULL even for valid OID, for example due
to a concurrent DROP STATISTICS, so a HeapTupleIsValid is necessary.
Without it, it may fail with a segfault.
Reported by Alexander Lakhin, patch by me. Backpatch to 13, where ALTER
STATISTICS ... SET STATISTICS was introduced.
Backpatch-through: 13
Discussion: https://postgr.es/m/17372-bf3b6e947e35ae77%40postgresql.org
Previously, unless we had to add a NOT NULL constraint to the column,
this command resulted in updating only the index's relcache entry.
That's problematic when replication behavior is being driven off the
existence of a primary key: other sessions (and ours too for that
matter) failed to recalculate their opinion of whether the table can
be replicated. Add a relcache invalidation to fix it.
This has been broken since pg_class.relhaspkey was removed in v11.
Before that, updating the table's relhaspkey value sufficed to cause
a cache flush. Hence, backpatch to v11.
Report and patch by Hou Zhijie
Discussion: https://postgr.es/m/OS0PR01MB5716EBE01F112C62F8F9B786947B9@OS0PR01MB5716.jpnprd01.prod.outlook.com
In libpq and ecpglib, multiple threads can concurrently enter the
initialization logic for message localization. Since we set the
its-done flag before actually doing the work, it'd be possible
for some threads to reach gettext() before anyone has called
bindtextdomain(). Barring bugs in libintl itself, this would not
result in anything worse than failure to localize some early
messages. Nonetheless, it's a bug, and an easy one to fix.
Noted while investigating bug #17299 from Clemens Zeidler
(much thanks to Liam Bowen for followup investigation on that).
It currently appears that that actually *is* a bug in libintl itself,
but that doesn't let us off the hook for this bit.
Back-patch to all supported versions.
Discussion: https://postgr.es/m/17299-7270741958c0b1ab@postgresql.org
Discussion: https://postgr.es/m/CAE7q7Eit4Eq2=bxce=Fm8HAStECjaXUE=WBQc-sDDcgJQ7s7eg@mail.gmail.com
While individual logical rewrite files were synced to disk, the directory was
not. On some filesystems that could lead to loosing directory entries after a
crash.
Reported-By: Tom Lane <tgl@sss.pgh.pa.us>
Author: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/867F2E29-2782-4869-970E-B984C6D35A8F@amazon.com
Backpatch: 10-
The logic in charge of writing commit timestamps (enabled with
track_commit_timestamp) for subtransactions had a one-bug bug,
where it would be possible that commit timestamps go missing for the
last subtransaction committed.
While on it, simplify a bit the iteration logic in the loop writing the
commit timestamps, as per suggestions from Kyotaro Horiguchi and Tom
Lane, so as some variable initializations are not part of the loop
itself.
Issue introduced in 73c986a.
Analyzed-by: Alex Kingsborough
Author: Alex Kingsborough, Kyotaro Horiguchi
Discussion: https://postgr.es/m/73A66172-4050-4F2A-B7F1-13508EDA2144@amazon.com
Backpatch-through: 10
Commits 6c4a8903b et al. had a couple of deficiencies:
* The logic I added to Cluster::start to see if a PID file is present
could be fooled by a stale PID file left over from a previous
postmaster. To fix, if we're not sure whether we expect to find a
running postmaster or not, validate the PID using "kill 0".
* 017_shm.pl has a loop in which it just issues repeated Cluster::start
calls; this will fail if some invocation fails but leaves self->_pid
set. Per buildfarm results, the above fix is not enough to make this
safe: we might have "validated" a PID for a postmaster that exits
immediately after we look. Hence, match each failed start call with
a stop call that will get us back to the self->_pid == undef state.
Add a fail_ok option to Cluster::stop to make this work.
Discussion: https://postgr.es/m/CA+hUKGKV6fOHvfiPt8=dOKzvswjAyLoFoJF1iQXMNpi7+hD1JQ@mail.gmail.com
Since the test requires reproducible behavior from VACUUM, and since
DISABLE_PAGE_SKIPPING doesn't actually disable all forms of page
skipping, let's use a temporary table to avoid contention.
Back-patch to 12, like commit 3414099c.
Discussion: https://postgr.es/m/20220120052404.sonrhq3f3qgplpzj%40alap3.anarazel.de
"pg_ctl start" might start a new postmaster and then return failure
anyway, for example if PGCTLTIMEOUT is exceeded. If there is a
postmaster there, it's still incumbent on us to shut it down at
script end, so check for the PID file even though we are about
to fail.
This has been broken all along, so back-patch to all supported branches.
Discussion: https://postgr.es/m/647439.1642622744@sss.pgh.pa.us
Where we test vacuum_truncate's effects, sometimes this is failing to
truncate as expected on the build farm. That could be explained by page
skipping, so disable it explicitly, with the theory that commit fe246d1c
didn't go far enough.
Back-patch to 12, where the vacuum_truncate tests were added.
Discussion: https://postgr.es/m/CA%2BhUKGLT2UL5_JhmBzUgkdyKfc%3D5J-gJSQJLysMs4rqLUKLAzw%40mail.gmail.com
The original coding (from c33869cc3) failed with "more than one row
returned by a subquery used as an expression" if there were unrelated
triggers of the same tgname on parent partitioned tables. (That's
possible because statement-level triggers don't get inherited.) Fix
by applying LIMIT 1 after sorting the candidates by inheritance level.
Also, wrap the subquery in a CASE so that we don't have to execute it at
all when the trigger is visibly non-inherited. Aside from saving some
cycles, this avoids the need for a confusing and undocumented NULLIF().
While here, tweak the format of the emitted query to look a bit
nicer for "psql -E", and add some explanation of this subquery,
because it badly needs it.
Report and patch by Justin Pryzby (with some editing by me).
Back-patch to v13 where the faulty code came in.
Discussion: https://postgr.es/m/20211217154356.GJ17618@telsasoft.com
It seems highly unlikely that gettext() can be relied on to be
async-signal-safe. psql used to understand that, but someone got
it wrong long ago in the src/bin/scripts/ version of handle_sigint,
and then the bad idea was perpetuated when those two versions were
unified into src/fe_utils/cancel.c.
I'm unsure why there have not been field complaints about this
... maybe gettext() is signal-safe once it's translated at least
one message? But we have no business assuming any such thing.
In cancel.c (v13 and up), I preserved our ability to localize
"Cancel request sent" messages by invoking gettext() before
the signal handler is set up. In earlier branches I just made
src/bin/scripts/ not localize those messages, as psql did then.
(Just for extra unsafety, the src/bin/scripts/ version was
invoking fprintf() from a signal handler. Sigh.)
Noted while fixing signal-safety issues in PQcancel() itself.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2937814.1641960929@sss.pgh.pa.us
PQcancel() is supposed to be safe to call from a signal handler,
and indeed psql uses it that way. All of the library functions
it uses are specified to be async-signal-safe by POSIX ...
except for strerror. Neither plain strerror nor strerror_r
are considered safe. When this code was written, back in the
dark ages, we probably figured "oh, strerror will just index
into a constant array of strings" ... but in any locale except C,
that's unlikely to be true. Probably the reason we've not heard
complaints is that (a) this error-handling code is unlikely to be
reached in normal use, and (b) in many scenarios, localized error
strings would already have been loaded, after which maybe it's
safe to call strerror here. Still, this is clearly unacceptable.
The best we can do without relying on strerror is to print the
decimal value of errno, so make it do that instead. (This is
probably not much loss of user-friendliness, given that it is
hard to get a failure here.)
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2937814.1641960929@sss.pgh.pa.us
The need for this was foreseen long ago, but when record_eq
actually became hashable (in commit 01e658fa7), we missed updating
this spot.
Per bug #17363 from Elvis Pranskevichus. Back-patch to v14 where
the faulty commit came in.
Discussion: https://postgr.es/m/17363-f6d42fd0d726be02@postgresql.org
Since enum labels have to be single-quoted, this part of the
tab completion machinery got side-swiped by commit cd69ec66c.
A side-effect of that commit is that (at least with some versions
of Readline) the text string passed for completion will omit the
leading quote mark of the enum label literal. Libedit still acts
the same as before, though, so adapt COMPLETE_WITH_ENUM_VALUE so
that it can cope with either convention.
Also, when we fail to find any valid completion, set
rl_completion_suppress_quote = 1. Otherwise readline will
go ahead and append a closing quote, which is unwanted.
Per report from Peter Eisentraut. Back-patch to v13 where
cd69ec66c came in.
Discussion: https://postgr.es/m/8ca82d89-ec3d-8b28-8291-500efaf23b25@enterprisedb.com
Commit 859b3003de disabled building of extended stats for inheritance
trees, to prevent updating the same catalog row twice. While that
resolved the issue, it also means there are no extended stats for
declaratively partitioned tables, because there are no data in the
non-leaf relations.
That also means declaratively partitioned tables were not affected by
the issue 859b3003de addressed, which means this is a regression
affecting queries that calculate estimates for the whole inheritance
tree as a whole (which includes e.g. GROUP BY queries).
But because partitioned tables are empty, we can invert the condition
and build statistics only for the case with inheritance, without losing
anything. And we can consider them when calculating estimates.
It may be necessary to run ANALYZE on partitioned tables, to collect
proper statistics. For declarative partitioning there should no prior
statistics, and it might take time before autoanalyze is triggered. For
tables partitioned by inheritance the statistics may include data from
child relations (if built 859b3003de), contradicting the current code.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Since commit 859b3003de we only build extended statistics for individual
relations, ignoring the child relations. This resolved the issue with
updating catalog tuple twice, but we still tried to use the statistics
when calculating estimates for the whole inheritance tree. When the
relations contain very distinct data, it may produce bogus estimates.
This is roughly the same issue 427c6b5b9 addressed ~15 years ago, and we
fix it the same way - by ignoring extended statistics when calculating
estimates for the inheritance tree as a whole. We still consider
extended statistics when calculating estimates for individual child
relations, of course.
This may result in plan changes due to different estimates, but if the
old statistics were not describing the inheritance tree particularly
well it's quite likely the new plans is actually better.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Since dc7420c2c9 the horizon used for pruning is determined "lazily". A more
accurate horizon is built on-demand, rather than in GetSnapshotData(). If a
horizon computation is triggered between two HeapTupleSatisfiesVacuum() calls
for the same tuple, the result can change from RECENTLY_DEAD to DEAD.
heap_page_prune() can process the same tid multiple times (once following an
update chain, once "directly"). When the result of HeapTupleSatisfiesVacuum()
of a tuple changes from RECENTLY_DEAD during the first access, to DEAD in the
second, the "tuple is DEAD and doesn't chain to anything else" path in
heap_prune_chain() can end up marking the target of a LP_REDIRECT ItemId
unused.
Initially not easily visible,
Once the target of a LP_REDIRECT ItemId is marked unused, a new tuple version
can reuse it. At that point the corruption may become visible, as index
entries pointing to the "original" redirect item, now point to a unrelated
tuple.
To fix, compute HTSV for all tuples on a page only once. This fixes the entire
class of problems of HTSV changing inside heap_page_prune(). However,
visibility changes can obviously still occur between HTSV checks inside
heap_page_prune() and outside (e.g. in lazy_scan_prune()).
The computation of HTSV is now done in bulk, in heap_page_prune(), rather than
on-demand in heap_prune_chain(). Besides being a bit simpler, it also is
faster: Memory accesses can happen sequentially, rather than in the order of
HOT chains.
There are other causes of HeapTupleSatisfiesVacuum() results changing between
two visibility checks for the same tuple, even before dc7420c2c9. E.g.
HEAPTUPLE_INSERT_IN_PROGRESS can change to HEAPTUPLE_DEAD when a transaction
aborts between the two checks. None of the these other visibility status
changes are known to cause corruption, but heap_page_prune()'s approach makes
it hard to be confident.
A patch implementing a more fundamental redesign of heap_page_prune(), which
fixes this bug and simplifies pruning substantially, has been proposed by
Peter Geoghegan in
https://postgr.es/m/CAH2-WzmNk6V6tqzuuabxoxM8HJRaWU6h12toaS-bqYcLiht16A@mail.gmail.com
However, that redesign is larger change than desirable for backpatching. As
the new design still benefits from the batched visibility determination
introduced in this commit, it makes sense to commit this narrower fix to 14
and master, and then commit Peter's improvement in master.
The precise sequence required to trigger the bug is complicated and hard to do
exercise in an isolation test (until we have wait points). Due to that the
isolation test initially posted at
https://postgr.es/m/20211119003623.d3jusiytzjqwb62p%40alap3.anarazel.de
and updated in
https://postgr.es/m/20211122175914.ayk6gg6nvdwuhrzb%40alap3.anarazel.de
isn't committable.
A followup commit will introduce additional assertions, to detect problems
like this more easily.
Bug: #17255
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Debugged-By: Andres Freund <andres@anarazel.de>
Debugged-By: Peter Geoghegan <pg@bowt.ie>
Author: Andres Freund <andres@andres@anarazel.de>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/20211122175914.ayk6gg6nvdwuhrzb@alap3.anarazel.de
Backpatch: 14-, the oldest branch containing dc7420c2c9
This reverts commits ab27df2, af8d530 and 3a0cced, that introduced
pg_cryptohash_error(). In order to make the core code able to pass down
the new error types that this introduced, some of the MD5-related
routines had to be reworked, causing an ABI breakage, but we found that
some external extensions rely on them. Maintaining compatibility
outweights the error report benefits, so just revert the change in v14.
Reported-by: Laurenz Albe
Discussion: https://postgr.es/m/9f0c0a96d28cf14fc87296bbe67061c14eb53ae8.camel@cybertec.at
Commit 7745bc352 intended to ensure that whole-row Vars would be
printed with "::type" decoration in all contexts where plain
"var.*" notation would result in star-expansion, notably in
ROW() and VALUES() constructs. However, it missed the case of
INSERT with a single-row VALUES, as reported by Timur Khanjanov.
Nosing around ruleutils.c, I found a second oversight: the
code for RowCompareExpr generates ROW() notation without benefit
of an actual RowExpr, and naturally it wasn't in sync :-(.
(The code for FieldStore also does this, but we don't expect that
to generate strictly parsable SQL anyway, so I left it alone.)
Back-patch to all supported branches.
Discussion: https://postgr.es/m/efaba6f9-4190-56be-8ff2-7a1674f9194f@intrans.baku.az
Commit 9dc718bd added a "logically unchanged by UPDATE" hinting
mechanism, which is currently used within nbtree indexes only (see
commit d168b666). This mechanism determined whether or not the incoming
item is a logically unchanged duplicate (a duplicate needed only for
MVCC versioning purposes) once per row updated per non-HOT update. This
approach led to memory leaks which were noticeable with an UPDATE
statement that updated sufficiently many rows, at least on tables that
happen to have an expression index.
On HEAD, fix the issue by adding a cache to the executor's per-index
IndexInfo struct.
Take a different approach on Postgres 14 to avoid an ABI break: simply
pass down the hint to all indexes unconditionally with non-HOT UPDATEs.
This is deemed acceptable because the hint is currently interpreted
within btinsert() as "perform a bottom-up index deletion pass if and
when the only alternative is splitting the leaf page -- prefer to delete
any LP_DEAD-set items first". nbtree must always treat the hint as a
noisy signal about what might work, as a strategy of last resort, with
costs imposed on non-HOT updaters. (The same thing might not be true
within another index AM that applies the hint, which is why the original
behavior is preserved on HEAD.)
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Klaudie Willis <Klaudie.Willis@protonmail.com>
Diagnosed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/261065.1639497535@sss.pgh.pa.us
Backpatch: 14-, where the hinting mechanism was added.
Experimenting with FIPS mode enabled, I saw
regression=# \password joe
Enter new password for user "joe":
Enter it again:
could not encrypt password: disabled for FIPS
out of memory
because PQencryptPasswordConn was still of the opinion that "out of
memory" is always appropriate to print.
Minor oversight in b69aba745. Like that one, back-patch to v14.
The existing cryptohash facility was causing problems in some code paths
related to MD5 (frontend and backend) that relied on the fact that the
only type of error that could happen would be an OOM, as the MD5
implementation used in PostgreSQL ~13 (the in-core implementation is
used when compiling with or without OpenSSL in those older versions),
could fail only under this circumstance.
The new cryptohash facilities can fail for reasons other than OOMs, like
attempting MD5 when FIPS is enabled (upstream OpenSSL allows that up to
1.0.2, Fedora and Photon patch OpenSSL 1.1.1 to allow that), so this
would cause incorrect reports to show up.
This commit extends the cryptohash APIs so as callers of those routines
can fetch more context when an error happens, by using a new routine
called pg_cryptohash_error(). The error states are stored within each
implementation's internal context data, so as it is possible to extend
the logic depending on what's suited for an implementation. The default
implementation requires few error states, but OpenSSL could report
various issues depending on its internal state so more is needed in
cryptohash_openssl.c, and the code is shaped so as we are always able to
grab the necessary information.
The core code is changed to adapt to the new error routine, painting
more "const" across the call stack where the static errors are stored,
particularly in authentication code paths on variables that provide
log details. This way, any future changes would warn if attempting to
free these strings. The MD5 authentication code was also a bit blurry
about the handling of "logdetail" (LOG sent to the postmaster), so
improve the comments related that, while on it.
The origin of the problem is 87ae969, that introduced the centralized
cryptohash facility. Extra changes are done for pgcrypto in v14 for the
non-OpenSSL code path to cope with the improvements done by this
commit.
Reported-by: Michael Mühlbeyer
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/89B7F072-5BBE-4C92-903E-D83E865D9367@trivadis.com
Backpatch-through: 14
This addresses some problems in the describe queries used for extended
statistics:
- Two schema qualifications for the text type were missing for \dX.
- The list of extended statistics listed for a table through \d was
ordered based on the object OIDs, but it is more consistent with the
other commands to order by namespace and then by object name.
- A couple of aliases were not used in \d. These are removed.
This is similar to commits 1f092a3 and 07f8a9e.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220107022235.GA14051@telsasoft.com
Backpatch-through: 14
Instead of using a hardcoded or default path to the perl file the .bat
file is a wrapper for, we use a path that means the file is found in
the same directory as the .bat file.
Patch by Anton Voloshin, slightly tweaked by me.
Backpatch to all live branches
Discussion: https://postgr.es/m/2b7a674b-5fb0-d264-75ef-ecc7a31e54f8@postgrespro.ru
We disallow altering a column datatype within a regular table,
if the table's rowtype is used as a column type elsewhere,
because we lack code to go around and rewrite the other tables.
This restriction should apply to partitioned tables as well, but it
was not checked because ATRewriteTables and ATPrepAlterColumnType
were not on the same page about who should do it for which relkinds.
Per bug #17351 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17351-6db1870f3f4f612a@postgresql.org
get_rel_sync_entry(), which is called each time a change needs to be
logically replicated, is a rather hot code path in the WAL sender
sending logical changes. This code path was doing a relcache access on
relkind and relpartition for each logical change, but we only need to
know this information when building or re-building the cached
information for a relation.
Some measurements prove that this is noticeable in perf profiles,
particularly when attempting to replicate changes from relations that
are not published as these cause less overhead in the WAL sender,
delaying further the replication of changes for relations that are
published.
Issue introduced in 83fd453.
Author: Hou Zhijie
Reviewed-by: Kyotaro Horiguchi, Euler Taveira
Discussion: https://postgr.es/m/OS0PR01MB5716E863AA9E591C1F010F7A947D9@OS0PR01MB5716.jpnprd01.prod.outlook.com
Backpatch-through: 13
Under concurrency, it is possible for two sessions to be merrily locking
and releasing a tuple and marking it again as HEAP_XMAX_INVALID all the
while a third session attempts to lock it, miserably fails at it, and
then contemplates life, the universe and everything only to eventually
fail an assertion that said bit is not set. Before SKIP LOCKED that was
indeed a reasonable expectation, but alas! commit df630b0dd5 falsified
it.
This bug is as old as time itself, and even older, if you think time
begins with the oldest supported branch. Therefore, backpatch to all
supported branches.
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Discussion: https://postgr.es/m/CANbhV-FeEwMnN8yuMyss7if1ZKjOKfjcgqB26n8pqu1e=q0ebg@mail.gmail.com
Commit 4ace45677 failed to fix the problem fully, because the
same issue of attempting to fetch a non-returnable index column
can occur when rechecking the indexqual after using a lossy index
operator. Moreover, it broke EXPLAIN for such indexquals (which
indicates a gap in our test cases :-().
Revert the code changes of 4ace45677 in favor of adding a new field
to struct IndexOnlyScan, containing a version of the indexqual that
can be executed against the index-returned tuple without using any
non-returnable columns. (The restrictions imposed by check_index_only
guarantee this is possible, although we may have to recompute indexed
expressions.) Support construction of that during setrefs.c
processing by marking IndexOnlyScan.indextlist entries as resjunk
if they can't be returned, rather than removing them entirely.
(We could alternatively require setrefs.c to look up the IndexOptInfo
again, but abusing resjunk this way seems like a reasonably safe way
to avoid needing to do that.)
This solution isn't great from an API-stability standpoint: if there
are any extensions out there that build IndexOnlyScan structs directly,
they'll be broken in the next minor releases. However, only a very
invasive extension would be likely to do such a thing. There's no
change in the Path representation, so typical planner extensions
shouldn't have a problem.
As before, back-patch to all supported branches.
Discussion: https://postgr.es/m/3179992.1641150853@sss.pgh.pa.us
Discussion: https://postgr.es/m/17350-b5bdcf476e5badbb@postgresql.org
If an index has both returnable and non-returnable columns, and one of
the non-returnable columns is an expression using a Var that is in a
returnable column, then a query returning that expression could result
in an index-only scan plan that attempts to read the non-returnable
column, instead of recomputing the expression from the returnable
column as intended.
To fix, redefine the "indextlist" list of an IndexOnlyScan plan node
as containing null Consts in place of any non-returnable columns.
This solves the problem by preventing setrefs.c from falsely matching
to such entries. The executor is happy since it only cares about the
exposed types of the entries, and ruleutils.c doesn't care because a
correct plan won't reference those entries. I considered some other
ways to prevent setrefs.c from doing the wrong thing, but this way
seems good since (a) it allows a very localized fix, (b) it makes
the indextlist structure more compact in many cases, and (c) the
indextlist is now a more faithful representation of what the index AM
will actually produce, viz. nulls for any non-returnable columns.
This is easier to hit since we introduced included columns, but it's
possible to construct failing examples without that, as per the
added regression test. Hence, back-patch to all supported branches.
Per bug #17350 from Louis Jachiet.
Discussion: https://postgr.es/m/17350-b5bdcf476e5badbb@postgresql.org
The reverted commit attempted to fix SQL specification compliance for
the cases which 6aaaa76bb left. This however broke existing behavior
which takes precedence over spec compliance so revert. The introduced
tests are left after the revert since the codepath isn't well covered.
Per bug report 17346. Backpatch down to 14 where it was introduced.
Reported-by: Andrew Bille <andrewbille@gmail.com>
Discussion: https://postgr.es/m/17346-f72b28bd1a341060@postgresql.org
catalog/pg_class.h was stating that REPLICA_IDENTITY_INDEX with a
dropped index is equivalent to REPLICA_IDENTITY_DEFAULT. The code tells
a different story, as it is equivalent to REPLICA_IDENTITY_NOTHING.
The behavior exists since the introduction of replica identities, and
fe7fd4e even added tests for this case but I somewhat forgot to fix this
comment.
While on it, this commit reorganizes the documentation about replica
identities on the ALTER TABLE page, and a note is added about the case
of dropped indexes with REPLICA_IDENTITY_INDEX.
Author: Michael Paquier, Wei Wang
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/OS3PR01MB6275464AD0A681A0793F56879E759@OS3PR01MB6275.jpnprd01.prod.outlook.com
Backpatch-through: 10
One code path related to this flavor of ALTER TABLE was checking that
the relation to detach has to be a normal table or a partitioned table,
which would fail if using the command with a different relation kind.
Views, sequences and materialized views cannot be part of a partition
tree, so these would cause the command to fail anyway, but the assertion
was triggered. Foreign tables can be part of a partition tree, and
again the assertion would have failed. The simplest solution is just to
remove this assertion, so as we get the same failure as the
non-concurrent code path.
While on it, add a regression test in postgres_fdw for the concurrent
partition detach of a foreign table, as per a suggestion from Alexander
Lakhin.
Issue introduced in 71f4c8c.
Reported-by: Alexander Lakhin
Author: Michael Paquier, Alexander Lakhin
Reviewed-by: Peter Eisentraut, Kyotaro Horiguchi
Discussion: https://postgr.es/m/17339-a9e09aaf38a3457a@postgresql.org
Backpatch-through: 14
Fix the code changed by commit 5c056b0c2 so that we always generate
RelabelType, not something else, for a cast to unspecified typmod.
Otherwise planner optimizations might not happen.
It appears we missed this point because the previous experiments were
done on type numeric: the parser undesirably generates a call on the
numeric() length-coercion function, but then numeric_support()
optimizes that down to a RelabelType, so that everything seems fine.
It misbehaves for types that have a non-optimized length coercion
function, such as bpchar.
Per report from John Naylor. Back-patch to all supported branches,
as the previous patch eventually was. Unfortunately, that no longer
includes 9.6 ... we really shouldn't put this type of change into a
nearly-EOL branch.
Discussion: https://postgr.es/m/CAFBsxsEfbFHEkouc+FSj+3K1sHipLPbEC67L0SAe-9-da8QtYg@mail.gmail.com
edc2332 has introduced in vcregress.pl some control on the environment
variables LZ4, TAR and GZIP_PROGRAM to allow any TAP tests to be able
use those commands. This makes the settings more consistent with
src/Makefile.global.in, as the same default gets used for Make and MSVC
builds.
Each parameter can be changed in buildenv.pl, but as a default gets
assigned after loading buldenv.pl, it is not possible to unset any of
these, and using an empty value would not work with "||=" either. As
some environments may not have a compatible command in their PATH (tar
coming from MinGW is an issue, for one), this could break tests without
an exit path to bypass any failing test. This commit changes things so
as the default values for LZ4, TAR and GZIP_PROGRAM are assigned before
loading buildenv.pl, not after. This way, we keep the same amount of
compatibility as a GNU build with the same defaults, and it becomes
possible to unset any of those values.
While on it, this adds some documentation about those three variables in
the section dedicated to the TAP tests for MSVC.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YbGYe483803il3X7@paquier.xyz
Backpatch-through: 10
This could only matter if (a) long is wider than int, and (b) the heap
of free blocks exceeds UINT_MAX entries, which seems pretty unlikely.
Still, it's a theoretical bug, so backpatch to v13 where the typo came
in (in commit c02fdc922).
In passing, also make swap_nodes() use consistent datatypes.
Ma Liangzhu
Discussion: https://postgr.es/m/17336-fc4e522d26a750fd@postgresql.org
When using replication origins, pg_replication_origin_xact_setup() is an
optional choice to be able to set a LSN and a timestamp to mark the
origin, which would be additionally added to WAL for transaction commits
or aborts (including 2PC transactions). An assertion in the code path
of PREPARE TRANSACTION assumed that this data should always be set, so
it would trigger when using replication origins without setting up an
origin LSN. Some tests are added to cover more this kind of scenario.
Oversight in commit 1eb6d65.
Per discussion with Amit Kapila and Masahiko Sawada.
Discussion: https://postgr.es/m/YbbBfNSvMm5nIINV@paquier.xyz
Backpatch-through: 11
When writing / debugging an isolation test it sometimes is useful to see which
session holds what lock etc. To make it easier, both as part of spec files and
interactively, append the session name to application_name. Since b1907d688
application_name already contains the test name, this appends the session's
name to that.
insert-conflict-specconflict did something like this manually, which can now
be removed.
As we have done lately with other test infrastructure improvements, backpatch
this change, to make it easier to backpatch tests.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Michael Paquier <michael@paquier.xyz>
Reviewed-By: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20211211012052.2blmzcmxnxqawd2z@alap3.anarazel.de
Backpatch: 10-, to make backpatching of tests easier.
The multirange_get_range() function fails when two boundaries of the same
range have different alignments. Fix that by adding proper pointer alignment.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/17300-dced2d01ddeb1f2f%40postgresql.org
Backpatch-through: 14
We publish the child table's data twice for a publication that has both
child and parent tables and is published with publish_via_partition_root
as true. This happens because subscribers will initiate synchronization
using both parent and child tables, since it gets both as separate tables
in the initial table list.
Ensure that pg_publication_tables returns only parent tables in such
cases.
Author: Hou Zhijie
Reviewed-by: Greg Nancarrow, Amit Langote, Vignesh C, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/OS0PR01MB57167F45D481F78CDC5986F794B99@OS0PR01MB5716.jpnprd01.prod.outlook.com
REINDEX CONCURRENTLY run on a toast index or a toast relation could
corrupt the target indexes rebuilt, as a backend running in parallel
that manipulates toast values would directly release the lock on the
toast relation when its local operation is done, rather than releasing
the lock once the transaction that manipulated the toast values
committed.
The fix done here is simple: we now hold a ROW EXCLUSIVE lock on the
toast relation when saving or deleting a toast value until the
transaction working on them is committed, so as a concurrent reindex
happening in parallel would be able to wait for any activity and see any
new rows inserted (or deleted).
An isolation test is added to check after the case fixed here, which is
a bit fancy by design as it relies on allow_system_table_mods to rename
the toast table and its index to fixed names. This way, it is possible
to reindex them directly without any dependency on the OID of the
underlying relation. Note that this could not use a DO block either, as
REINDEX CONCURRENTLY cannot be run in a transaction block. The test is
backpatched down to 13, where it is possible, thanks to c4a7a39, to use
allow_system_table_mods in a test suite.
Reported-by: Alexey Ermakov
Analyzed-by: Andres Freund, Noah Misch
Author: Michael Paquier
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/17268-d2fb426e0895abd4@postgresql.org
Backpatch-through: 12
Certain settings from configuration or the Makefile infrastructure are
used by the TAP tests, but were not being set up by vcregress.pl. This
remedies those omissions. This should increase test coverage, especially
on the buildfarm.
Reviewed by Noah Misch
Discussion: https://postgr.es/m/17093da5-e40d-8335-d53a-2bd803fc38b0@dunslane.net
Backpatch to all live branches.
Further experimentation shows that commit 6051857fc is not sufficient
when using (some versions of?) OpenSSL. The reason is obscure, but
calling shutdown(socket, SD_SEND) improves matters.
Per testing by Andrew Dunstan and Alexander Lakhin.
Back-patch as before.
Discussion: https://postgr.es/m/af5e0bf3-6a61-bb97-6cba-061ddf22ff6b@dunslane.net
It turns out that this is necessary to keep Winsock from dropping any
not-yet-sent data, such as an error message explaining the reason for
process termination. It's pretty weird that the implicit close done
by the kernel acts differently from an explicit close, but it's hard
to argue with experimental results.
Independently submitted by Alexander Lakhin and Lars Kanis (comments
by me, though). Back-patch to all supported branches.
Discussion: https://postgr.es/m/90b34057-4176-7bb0-0dbb-9822a5f6425b@greiz-reinsdorf.de
Discussion: https://postgr.es/m/16678-253e48d34dc0c376@postgresql.org
The existing pg_upgrade/test.sh and the buildfarm code have been holding
the same set of SQL queries when doing cross-version upgrade tests to
adapt the objects created by the regression tests before the upgrade
(mostly, incompatible or non-existing objects need to be dropped from
the origin, perhaps re-created).
This moves all those SQL queries into a new, separate, file with a set
of \if clauses to handle the version checks depending on the old version
of the cluster to-be-upgraded.
The long-term plan is to make the buildfarm code re-use this new SQL
file, so as committers are able to fix any compatibility issues in the
tests of pg_upgrade with a refresh of the core code, without having to
poke at the buildfarm client. Note that this is only able to handle the
main regression test suite, and that nothing is done yet for contrib
modules yet (these have more issues like their database names).
A backpatch down to 10 is done, adapting the version checks as this
script needs to be only backward-compatible, so as it becomes possible
to clean up a maximum amount of code within the buildfarm client.
Author: Justin Pryzby, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 10
The various ALTER OWNER routines tend to leak memory in
CurrentMemoryContext. That's not a problem when they're only called
once per command; but in this usage where we might be touching many
objects, it can amount to a serious memory leak. Fix that by running
each call in a short-lived context.
(DROP OWNED BY likely has a similar issue, except that you'll probably
run out of lock table space before noticing. REASSIGN is worth fixing
since for most non-table object types, it won't take any lock.)
Back-patch to all supported branches. Unfortunately, in the back
branches this helps to only a limited extent, since the sinval message
queue bloats quite a lot in this usage before commit 3aafc030a,
consuming memory more or less comparable to what's actually leaked.
Still, it's clearly a leak with a simple fix, so we might as well fix it.
Justin Pryzby, per report from Guillaume Lelarge
Discussion: https://postgr.es/m/CAECtzeW2DAoioEGBRjR=CzHP6TdL=yosGku8qZxfX9hhtrBB0Q@mail.gmail.com
GetFinalPathNameByHandleA() cannot be used in compilation environments
where _WIN32_WINNT < 0x0600, meaning at least Windows XP used by some
buildfarm members under MinGW that Postgres still needs to support.
This was reported as a compilation warning by the buildfarm, but this is
actually worse than the report as the code would have not worked.
Instead, this switches to GetFileInformationByHandle() that is able to
fail for standard streams and succeed for redirected ones, which is what
we are looking for herein the code emulating fstat(). We also know that
it is able to work in all the environments still supported, thanks to
the existing logic of win32stat.c.
Issue introduced by 10260c7, so backpatch down to 14.
Reported-by: Justin Pryzby, via buildfarm member jacana
Author: Michael Paquier
Reviewed-by: Juan José Santamaría Flecha
Discussion: https://postgr.es/m/20211129050122.GK17618@telsasoft.com
Backpatch-through: 14
Surround the contents with a test that the feature is enabled by
configure, to silence header checking tools on systems without GSSAPI
installed.
Backpatch to 12, where the file appeared.
Discussion: https://postgr.es/m/202111161709.u3pbx5lxdimt@alvherre.pgsql
In commit ff9f111bce I mixed up inconsistent definitions of the LSN of
the first record in a page, when the previous record ends exactly at the
page boundary. The correct LSN is adjusted to skip the WAL page header;
I failed to use that when setting XLogReaderState->overwrittenRecPtr,
so at WAL replay time VerifyOverwriteContrecord would refuse to let
replay continue past that record.
Backpatch to 10. 9.6 also contains this bug, but it's no longer being
maintained.
Discussion: https://postgr.es/m/45597.1637694259@sss.pgh.pa.us
Commit 6aaaa76bb added support for the GRANTED BY clause in GRANT and
REVOKE statements, but missed adding support for checking the role in
the REVOKE ROLE case. Fix by checking that the parsed role matches the
CURRENT_ROLE/CURRENT_USER requirement, and also add some tests for it.
Backpatch to v14 where GRANTED BY support was introduced.
Discussion: https://postgr.es/m/B7F6699A-A984-4943-B9BF-CEB84C003527@yesql.se
Backpatch-through: 14
Inluding <compile.h> and <eval.h> has not been necessary since Python
2.4, since they are included via <Python.h>. Morever, <eval.h> is
being removed in Python 3.11. So remove these includes.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/84884.1637723223%40sss.pgh.pa.us
Replica identities that depend directly on an index rely on a set of
properties, one of them being that all the columns defined in this index
have to be marked as NOT NULL. There was a hole in the logic with ALTER
TABLE DROP NOT NULL, where it was possible to remove the NOT NULL
property of a column part of an index used as replica identity, so block
it to avoid problems with logical decoding down the road.
The same check was already done columns part of a primary key, so the
fix is straight-forward.
Author: Haiying Tang, Hou Zhijie
Reviewed-by: Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/OS0PR01MB6113338C102BEE8B2FFC5BD9FB619@OS0PR01MB6113.jpnprd01.prod.outlook.com
Backpatch-through: 10
The emulation of fstat() in win32stat.c caused two issues with the
existing in-core callers, failing on EINVAL when using a stream as
argument:
- psql's \copy would crash when using a stream.
- pg_recvlogical would fail with -f -.
The tests in copyselect.sql from the main test suite covers the first
case, and there is a TAP test for the second case. However, in both
cases, as the standard streams are always redirected, automated tests
did not notice those issues, requiring a terminal on Windows to be
reproducible.
This issue has been introduced in bed9075, and the origin of the problem
is that GetFileInformationByHandle() does not work directly on streams,
so this commit adds an extra code path to emulate and return a set of
stats that match best with the reality. Note that redirected streams
rely on handles that can be queried with GetFileInformationByHandle(),
but we can rely on GetFinalPathNameByHandleA() to detect this case.
Author: Dmitry Koval, Juan José Santamaría Flecha
Discussion: https://postgr.es/m/17288-6b58a91025a8a8a3@postgresql.org
Backpatch-through: 14
It's possible that a subplan below a Memoize node contains a parameter
from above the Memoize node. If this parameter changes then cache entries
may become out-dated due to the new parameter value.
Previously Memoize was mistakenly not aware of this. We fix this here by
flushing the cache whenever a parameter that's not part of the cache
key changes.
Bug: #17213
Reported by: Elvis Pranskevichus
Author: David Rowley
Discussion: https://postgr.es/m/17213-988ed34b225a2862@postgresql.org
Backpatch-through: 14, where Memoize was added
Documentation and any code paths related to VS are updated to keep the
whole consistent. Similarly to 2017 and 2019, the version of VS and the
version of nmake that we use to determine which code paths to use for
the build are still inconsistent in their own way.
Backpatch down to 10, so as buildfarm members are able to use this new
version of Visual Studio on all the stable branches supported.
Author: Hans Buschmann
Discussion: https://postgr.es/m/1633101364685.39218@nidsa.net
Backpatch-through: 10
It's possible that a subplan below a Memoize node contains a parameter
from above the Memoize node. If this parameter changes then cache entries
may become out-dated due to the new parameter value.
Previously Memoize was mistakenly not aware of this. We fix this here by
flushing the cache whenever a parameter that's not part of the cache
key changes.
Bug: #17213
Reported by: Elvis Pranskevichus
Author: David Rowley
Discussion: https://postgr.es/m/17213-988ed34b225a2862@postgresql.org
Backpatch-through: 14, where Memoize was added
Memoize would always use the hash equality operator for the cache key
types to determine if the current set of parameters were the same as some
previously cached set. Certain types such as floating points where -0.0
and +0.0 differ in their binary representation but are classed as equal by
the hash equality operator may cause problems as unless the join uses the
same operator it's possible that whichever join operator is being used
would be able to distinguish the two values. In which case we may
accidentally return in the incorrect rows out of the cache.
To fix this here we add a binary mode to Memoize to allow it to the
current set of parameters to previously cached values by comparing
bit-by-bit rather than logically using the hash equality operator. This
binary mode is always used for LATERAL joins and it's used for normal
joins when any of the join operators are not hashable.
Reported-by: Tom Lane
Author: David Rowley
Discussion: https://postgr.es/m/3004308.1632952496@sss.pgh.pa.us
Backpatch-through: 14, where Memoize was added
When a stored expression depends on a user-defined cast, the backend
records the dependency as being on the cast's implementation function
--- or indeed, if there's no cast function involved but just
RelabelType or CoerceViaIO, no dependency is recorded at all. This
is problematic for pg_dump, which is at risk of dumping things in the
wrong order leading to restore failures. Given the lack of previous
reports, the risk isn't that high, but it can be demonstrated if the
cast is used in some view whose rowtype is then used as an input or
result type for some other function. (That results in the view
getting hoisted into the functions portion of the dump, ahead of
the cast.)
A logically bulletproof fix for this would require including the
cast's OID in the parsed form of the expression, whence it could be
extracted by dependency.c, and then the stored dependency would force
pg_dump to do the right thing. Such a change would be fairly invasive,
and certainly not back-patchable. Moreover, since we'd prefer that
an expression using cast syntax be equal() to one doing the same
thing by explicit function call, the cast OID field would have to
have special ignored-by-comparisons semantics, making things messy.
So, let's instead fix this by a very simple hack in pg_dump: change
the object-type priority order so that casts are initially sorted
before functions, immediately after types. This fixes the problem
in a fairly direct way for casts that have no implementation function.
For those that do, the implementation function will be hoisted to just
before the cast by the dependency sorting step, so that we still have
a valid dump order. (I'm not sure that this provides a full guarantee
of no problems; but since it's been like this for many years without
any previous reports, this is probably enough to fix it in practice.)
Per report from Дмитрий Иванов.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAPL5KHoGa3uvyKp6z6m48LwCnTsK+LRQ_mcA4uKGfqAVSEjV_A@mail.gmail.com
If a table contains a generated column that's preceded by a dropped
column, dumpTableData_insert failed to account for the dropped
column, and would emit DEFAULT placeholder(s) in the wrong column(s).
This resulted in failures at restore time. The default COPY code path
did not have this bug, likely explaining why it wasn't noticed sooner.
While we're fixing this, we can be a little smarter about the
situation: (1) avoid unnecessarily fetching the values of generated
columns, (2) omit generated columns from the output, too, if we're
using --column-inserts. While these modes aren't expected to be
as high-performance as the COPY path, we might as well be as
efficient as we can; it doesn't add much complexity.
Per report from Дмитрий Иванов.
Back-patch to v12 where generated columns came in.
Discussion: https://postgr.es/m/CAPL5KHrkBniyQt5e1rafm5DdXvbgiiqfEQEJ9GjtVzN71Jj5pA@mail.gmail.com
Previously it was impossible to terminate these programs via control-C
while they were prompting for a password. We can fix that trivially
for their initial password prompts, by moving setup of the SIGINT
handler from just before to just after their initial GetConnection()
calls.
This fix doesn't permit escaping out of later re-prompts, but those
should be exceedingly rare, since the user's password or the server's
authentication setup would have to have changed meanwhile. We
considered applying a fix similar to commit 46d665bc2, but that
seemed more complicated than it'd be worth. Moreover, this way is
back-patchable, which that wasn't.
The misbehavior exists in all supported versions, so back-patch to all.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
Commit ac9099fc1 rearranged the logic in spgGetCache() that determines
the index's attType (nominal input data type) and leafType (actual
type stored in leaf index tuples). Turns out this broke things for
the case where (a) the actual input data type is different from the
nominal type, (b) the opclass's config function leaves leafType
defaulted, and (c) the opclass has no "compress" function. (b) caused
us to assign the actual input data type as leafType, and then since
that's not attType, we complained that a "compress" function is
required. For non-polymorphic opclasses, condition (a) arises in
binary-compatible cases, such as using SP-GiST text_ops for a varchar
column, or using any opclass on a domain over its nominal input type.
To fix, use attType for leafType when the index's declared column type
is different from but binary-compatible with attType. Do this only in
the defaulted-leafType case, to avoid overriding any explicit
selection made by the opclass.
Per bug #17294 from Ilya Anfimov. Back-patch to v14.
Discussion: https://postgr.es/m/17294-8f6c7962ce877edc@postgresql.org
While determining xid horizons, we skip over backends that are running
Vacuum. We also ignore Create Index Concurrently, or Reindex Concurrently
for the purposes of computing Xmin for Vacuum. But we were not setting the
flags corresponding to these operations when they are performed in
parallel which was preventing Xid horizon from advancing.
The optimization related to skipping Create Index Concurrently, or Reindex
Concurrently operations was implemented in PG-14 but the fix is the same
for the Parallel Vacuum as well so back-patched till PG-13.
Author: Masahiko Sawada
Reviewed-by: Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAD21AoCLQqgM1sXh9BrDFq0uzd3RBFKi=Vfo6cjjKODm0Onr5w@mail.gmail.com
This commit adds to the main regression test suite a table with all
the in-core data types (some exceptions apply). This table is not
dropped, so as pg_upgrade would be able to check the binary
compatibility of the types tracked in the table. If a new type is added
in core, this part of the tests would need a refresh but the tests are
designed to fail if that were to happen.
As this is useful for upgrades and that these rely on the objects
created in the regression test suite of the old version upgraded from,
a backpatch down to 12 is done, which is the last point where a binary
incompatible change has been done (7c15cef). This will hopefully be
enough to find out if something gets broken during the development of a
new version of Postgres, so as it is possible to take actions in
pg_upgrade itself in this case (like 0ccfc28 for sql_identifier).
An area that is not covered yet is related to external modules, which
may create their own types. The testing infrastructure of pg_upgrade is
not integrated yet with the external modules stored in core
(src/test/modules/ or contrib/, all use the same database name for their
tests so there would be an overlap). This could be improved in the
future.
Author: Justin Pryzby
Reviewed-by: Jacob Champion, Peter Eisentraut, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 12
The error handling here was a mess, as a result of a fundamentally
bad design (relying on errno to keep its value much longer than is
safe to assume) as well as a lot of just plain sloppiness, both as
to noticing errors at all and as to reporting the correct errno.
Moreover, the recent addition of LZ4 compression broke things
completely, because liblz4 doesn't use errno to report errors.
To improve matters, keep the error state in the DirectoryMethodData or
TarMethodData struct, and add a string field so we can handle cases
that don't set errno. (The tar methods already had a version of this,
but it can be done more efficiently since all these cases use a
constant error string.) Make the dir and tar methods handle errors
in basically identical ways, which they didn't before.
This requires copying errno into the state struct in a lot of places,
which is a bit tedious, but it has the virtue that we can get rid of
ad-hoc code to save and restore errno in a number of places ... not
to mention that it fixes other places that should've saved/restored
errno but neglected to.
In passing, fix some pointlessly static buffers to be ordinary
local variables.
There remains an issue about exactly how to handle errors from
fsync(), but that seems like material for its own patch.
While the LZ4 problems are new, all the rest of this is fixes for
old bugs, so backpatch to v10 where walmethods.c was introduced.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
Coverity complained that applying get_gz_error after a failed gzclose,
as we did in one place in pg_basebackup, is unsafe. I think it's
right: it's entirely likely that the call is touching freed memory.
Change that to inspect errno, as we do for other gzclose calls.
Also, be careful to initialize errno to zero immediately before any
gzclose() call where we care about the error status. (There are
some calls where we don't, because we already failed at some previous
step.) This ensures that we don't get a misleadingly irrelevant
error code if gzclose() fails in a way that doesn't set errno.
We could work harder at that, but it looks to me like all such cases
are basically can't-happen if we're not misusing zlib, so it's
not worth the extra notational cruft that would be required.
Also, fix several places that simply failed to check for close-time
errors at all, mostly at some remove from the close or gzclose itself;
and one place that did check but didn't bother to report the errno.
Back-patch to v12. These mistakes are older than that, but between
the frontend logging API changes that happened in v12 and the fact
that frontend code can't rely on %m before that, the patch would need
substantial revision to work in older branches. It doesn't quite
seem worth the trouble given the lack of related field complaints.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
If a SQL-standard function body contains an INSERT ... SELECT statement,
any function parameters referenced within the SELECT were always printed
in $N style, rather than using the parameter name if any. While not
strictly incorrect, this wasn't the intention, and it's inconsistent
with the way that such parameters would be printed in any other kind
of statement.
The cause is that the recursion to get_query_def from
get_insert_query_def neglected to pass down the context->namespaces
list, passing constant NIL instead. This is a very ancient oversight,
but AFAICT it had no visible consequences before commit e717a9a18
added an outermost namespace with function parameters. We don't allow
INSERT ... SELECT as a sub-query, except in a top-level WITH clause,
where it couldn't contain any outer references that might need to access
upper namespaces. So although that's arguably a bug, I don't see any
point in changing it before v14.
In passing, harden the code added to get_parameter by e717a9a18 so that
it won't crash if a PARAM_EXTERN Param appears in an unexpected place.
Per report from Erki Eessaar. Code fix by me, regression test case
by Masahiko Sawada.
Discussion: https://postgr.es/m/AM9PR01MB8268347BED344848555167FAFE949@AM9PR01MB8268.eurprd01.prod.exchangelabs.com
When changing REPLICA IDENTITY INDEX to another one, the target table's
relcache was not being invalidated. This leads to skipping update/delete
operations during apply on the subscriber side as the columns required to
search corresponding rows won't get logged.
Author: Tang Haiying, Hou Zhijie
Reviewed-by: Euler Taveira, Amit Kapila
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB61133CA11630DAE45BC6AD95FB939@OS0PR01MB6113.jpnprd01.prod.outlook.com
The documentation says plainly that \password acts on "the current user"
by default. What it actually acted on, or tried to, was the username
used to log into the current session. This is not the same thing if
one has since done SET ROLE or SET SESSION AUTHENTICATION. Aside from
the possible surprise factor, it's quite likely that the current role
doesn't have permissions to set the password of the original role.
To fix, use "SELECT CURRENT_USER" to get the role name to act on.
(This syntax works with servers at least back to 7.0.) Also, in
hopes of reducing confusion, include the role name that will be
acted on in the password prompt.
The discrepancy from the documentation makes this a bug, so
back-patch to all supported branches.
Patch by me; thanks to Nathan Bossart for review.
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
pg_stat_get_slru() in pgstatfuncs.c would point to one element after the
end of the array PgStat_SLRUStats when finishing to scan its entries.
This had no direct consequences as no data from the extra memory area
was read, but static analyzers would rightfully complain here. So let's
be clean.
While on it, this adds one regression test in the area reserved for
system views.
Reported-by: Alexander Kozhemyakin, via AddressSanitizer
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/17280-37da556e86032070@postgresql.org
Backpatch-through: 13
Buildfarm members kittiwake and tadarida have witnessed errors at this
site. The site discarded key facts. Back-patch to v10 (all supported
versions).
Reviewed by Michael Paquier and Tom Lane.
Discussion: https://postgr.es/m/20211107013157.GB790288@rfd.leadboat.com
PostgreSQL 13 and newer versions are directly impacted by that through
the SQL function normalize(), which would cause a call of this function
to write one byte past its allocation if using in input an empty
string after recomposing the string with NFC and NFKC. Older versions
(v10~v12) are not directly affected by this problem as the only code
path using normalization is SASLprep in SCRAM authentication that
forbids the case of an empty string, but let's make the code more robust
anyway there so as any out-of-core callers of this function are covered.
The solution chosen to fix this issue is simple, with the addition of a
fast-exit path if the decomposed string is found as empty. This would
only happen for an empty string as at its lowest level a codepoint would
be decomposed as itself if it has no entry in the decomposition table or
if it has a decomposition size of 0.
Some tests are added to cover this issue in v13~. Note that an empty
string has always been considered as normalized (grammar "IS NF[K]{C,D}
NORMALIZED", through the SQL function is_normalized()) for all the
operations allowed (NFC, NFD, NFKC and NFKD) since this feature has been
introduced as of 2991ac5. This behavior is unchanged but some tests are
added in v13~ to check after that.
I have also checked "make normalization-check" in src/common/unicode/,
while on it (works in 13~, and breaks in older stable branches
independently of this commit).
The release notes should just mention this commit for v13~.
Reported-by: Matthijs van der Vleuten
Discussion: https://postgr.es/m/17277-0c527a373794e802@postgresql.org
Backpatch-through: 10
protocol.sgml documented the layout for Type messages, but completely
dropped the ball otherwise, failing to explain what they are, when
they are sent, or what they're good for. While at it, do a little
copy-editing on the description of Relation messages.
In passing, adjust the comment for apply_handle_type() to make it
clearer that we choose not to do anything when receiving a Type
message, not that we think it has no use whatsoever.
Per question from Stefen Hillman.
Discussion: https://postgr.es/m/CAPgW8pMknK5pup6=T4a_UG=Cz80Rgp=KONqJmTdHfaZb0RvnFg@mail.gmail.com
We've seen intermittent failures in this test on slower buildfarm
machines, which I think can be explained by assuming that autovacuum
emitted some additional WAL. Disable autovacuum to stabilize it.
In passing, use stringwise not numeric comparison to compare
WAL file names. Doesn't matter at present, but they are
hex strings not decimal ...
Discussion: https://postgr.es/m/1372189.1636499287@sss.pgh.pa.us
libpq collects up to a bufferload of data whenever it reads data from
the socket. When SSL or GSS encryption is requested during startup,
any additional data received with the server's yes-or-no reply
remained in the buffer, and would be treated as already-decrypted data
once the encryption handshake completed. Thus, a man-in-the-middle
with the ability to inject data into the TCP connection could stuff
some cleartext data into the start of a supposedly encryption-protected
database session.
This could probably be abused to inject faked responses to the
client's first few queries, although other details of libpq's behavior
make that harder than it sounds. A different line of attack is to
exfiltrate the client's password, or other sensitive data that might
be sent early in the session. That has been shown to be possible with
a server vulnerable to CVE-2021-23214.
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23222
The server collects up to a bufferload of data whenever it reads data
from the client socket. When SSL or GSS encryption is requested
during startup, any additional data received with the initial
request message remained in the buffer, and would be treated as
already-decrypted data once the encryption handshake completed.
Thus, a man-in-the-middle with the ability to inject data into the
TCP connection could stuff some cleartext data into the start of
a supposedly encryption-protected database session.
This could be abused to send faked SQL commands to the server,
although that would only work if the server did not demand any
authentication data. (However, a server relying on SSL certificate
authentication might well not do so.)
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23214
In v14, because we don't have a field in RestrictInfo to cache both the
left and right type's hash equality operator, we just restrict the scope
of Memoize to only when the left and right types of a RestrictInfo are the
same.
In master we add another field to RestrictInfo and cache both hash
equality operators.
Reported-by: Jaime Casanova
Author: David Rowley
Discussion: https://postgr.es/m/20210929185544.GB24346%40ahch-to
Backpatch-through: 14
Currently, lastOverflowedXid is never reset. It's just adjusted on new
transactions known to be overflowed. But if there are no overflowed
transactions for a long time, snapshots could be mistakenly marked as
suboverflowed due to wraparound.
This commit fixes this issue by resetting lastOverflowedXid when needed
altogether with KnownAssignedXids.
Backpatch to all supported versions.
Reported-by: Stan Hu
Discussion: https://postgr.es/m/CAMBWrQ%3DFp5UAsU_nATY7EMY7NHczG4-DTDU%3DmCvBQZAQ6wa2xQ%40mail.gmail.com
Author: Kyotaro Horiguchi, Alexander Korotkov
Reviewed-by: Stan Hu, Simon Riggs, Nikolay Samokhvalov, Andrey Borodin, Dmitry Dolgov
When calculating distance between float4/float8 values, we need to be a
bit more careful about NaN values in order not to trigger assert. We
consider NaN values to be equal (distace 0.0) and in infinite distance
from all other values.
On builds without asserts, this issue is mostly harmless - the ranges
may be merged in less efficient order, but the index is still correct.
Per report from Andreas Seltenreich. Backpatch to 14, where this new
BRIN opclass was introduced.
Reported-by: Andreas Seltenreich
Discussion: https://postgr.es/m/87r1bw9ukm.fsf@credativ.de
When a role being dropped contains is referenced by catalog objects that
are concurrently also being dropped, a crash can result while trying to
construct the string that describes the objects. Suppress that by
ignoring objects whose descriptions are returned as NULL.
The majority of relevant codesites were already cautious about this
already; we had just missed a couple.
This is an old bug, so backpatch all the way back.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17126-21887f04508cb5c8@postgresql.org
If lo_export() fails to open the target file or to write to it, it leaks
the created LargeObjectDesc and its snapshot in the top-transaction
context and resource owner. That's pretty harmless, it's a small leak
after all, but it gives the user a "Snapshot reference leak" warning.
Fix by using a short-lived memory context and no resource owner for
transient LargeObjectDescs that are opened and closed within one function
call. The leak is easiest to reproduce with lo_export() on a directory
that doesn't exist, but in principle the other lo_* functions could also
fail.
Backpatch to all supported versions.
Reported-by: Andrew B
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/32bf767a-2d65-71c4-f170-122f416bab7e@iki.fi
Commit b4af70cb inverted the return value of the function
parallel_processing_is_safe(), but missed the amvacuumcleanup test.
Index AMs that don't support parallel cleanup at all were affected.
The practical consequences of this bug were not very serious. Hash
indexes are affected, but since they just return the number of blocks
during hashvacuumcleanup anyway, it can't have had much impact.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoA-Em+aeVPmBbL_s1V-ghsJQSxYL-i3JP8nTfPiD1wjKw@mail.gmail.com
Backpatch: 14-, where commit b4af70cb appears.
Commit b4af70cb, which simplified state managed by VACUUM, performed
refactoring of parallel VACUUM in passing. Confusion about the exact
details of the tasks that the leader process is responsible for led to
code that made it possible for parallel VACUUM to miss a subset of the
table's indexes entirely. Specifically, indexes that fell under the
min_parallel_index_scan_size size cutoff were missed. These indexes are
supposed to be vacuumed by the leader (alongside any parallel unsafe
indexes), but weren't vacuumed at all. Affected indexes could easily
end up with duplicate heap TIDs, once heap TIDs were recycled for new
heap tuples. This had generic symptoms that might be seen with almost
any index corruption involving structural inconsistencies between an
index and its table.
To fix, make sure that the parallel VACUUM leader process performs any
required index vacuuming for indexes that happen to be below the size
cutoff. Also document the design of parallel VACUUM with these
below-size-cutoff indexes.
It's unclear how many users might be affected by this bug. There had to
be at least three indexes on the table to hit the bug: a smaller index,
plus at least two additional indexes that themselves exceed the size
cutoff. Cases with just one additional index would not run into
trouble, since the parallel VACUUM cost model requires two
larger-than-cutoff indexes on the table to apply any parallel
processing. Note also that autovacuum was not affected, since it never
uses parallel processing.
Test case based on tests from a larger patch to test parallel VACUUM by
Masahiko Sawada.
Many thanks to Kamigishi Rei for her invaluable help with tracking this
problem down.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-By: Kamigishi Rei <iijima.yun@koumakan.jp>
Reported-By: Andrew Gierth <andrew@tao11.riddles.org.uk>
Diagnosed-By: Andres Freund <andres@anarazel.de>
Bug: #17245
Discussion: https://postgr.es/m/17245-ddf06aaf85735f36@postgresql.org
Discussion: https://postgr.es/m/20211030023740.qbnsl2xaoh2grq3d@alap3.anarazel.de
Backpatch: 14-, where the refactoring commit appears.
This undoes a mistake in 1ec7679f1: domainval and domainnull were
meant to live across loop iterations, but they were incorrectly
moved inside the loop. The effect was only to emit useless extra
EEOP_MAKE_READONLY steps, so it's not a big deal; nonetheless,
back-patch to v13 where the mistake was introduced.
Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAqXuhbkaAp-sGH6dR6Nsq7v28_0TPexHOm6FiDYqwQD-w@mail.gmail.com
As in commits 6301c3ada and e9d9ba2a4, avoid doing repetitive
list_delete_first() operations, since that would be expensive when
there are many files waiting to be unlinked. This is a slightly
larger change than in those cases. We have to keep the list state
valid for calls to AbsorbSyncRequests(), so it's necessary to invent a
"canceled" field instead of immediately deleting PendingUnlinkEntry
entries. Also, because we might not be able to process all the
entries, we need a new list primitive list_delete_first_n().
list_delete_first_n() is almost list_copy_tail(), but it modifies the
input List instead of making a new copy. I found a couple of existing
uses of the latter that could profitably use the new function. (There
might be more, but the other callers look like they probably shouldn't
overwrite the input List.)
As before, back-patch to v13.
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
In the same spirit as 6301c3ada, fix some more places where we were
using list_delete_first() in a loop and thereby risking O(N^2)
behavior. It's not clear that the lists manipulated in these spots
can get long enough to be really problematic ... but it's not clear
that they can't, either, and the fixes are simple enough.
As before, back-patch to v13.
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
Failing to do so results in inability of logical decoding to process the
WAL stream. Handle it by doing nothing.
Backpatch all the way back.
Reported-by: Petr Jelínek <petr.jelinek@enterprisedb.com>
The opclass parameter Datums from the old index are fetched in the same
way as for predicates and expressions, by grabbing them directly from
the system catalogs. They are then copied into the new IndexInfo that
will be used for the creation of the new copy.
This caused the new index to be rebuilt with default parameters rather
than the ones pre-defined by a user. The only way to get back a new
index with correct opclass parameters would be to recreate a new index
from scratch.
The issue has been introduced by 911e702.
Author: Michael Paquier
Reviewed-by: Zhihong Yu
Discussion: https://postgr.es/m/YX0CG/QpLXcPr8HJ@paquier.xyz
Backpatch-through: 13
When replaying a transaction that held many exclusive locks on the
primary, a standby server's startup process would expend O(N^2)
effort on manipulating the list of locks. This code was fine when
written, but commit 1cff1b95a made repetitive list_delete_first()
calls inefficient, as explained in its commit message. Fix by just
iterating the list normally, and releasing storage only when done.
(This'd be inadequate if we needed to recover from an error occurring
partway through; but we don't.)
Back-patch to v13 where 1cff1b95a came in.
Nathan Bossart
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
Commit d168b66682, which overhauled index deletion, added a
pg_unreachable() to the end of a sort comparator used when sorting heap
TIDs from an index page. This allows the compiler to apply
optimizations that assume that the heap TIDs from the index AM must
always be unique.
That doesn't seem like a good idea now, given recent reports of
corruption involving duplicate TIDs in indexes on Postgres 14. Demote
to an assertion, just in case.
Backpatch: 14-, where index deletion was overhauled.
DST law changes in Fiji, Jordan, Palestine, and Samoa. Historical
corrections for Barbados, Cook Islands, Guyana, Niue, Portugal, and
Tonga.
Also, the Pacific/Enderbury zone has been renamed to Pacific/Kanton.
The following zones have been merged into nearby, more-populous zones
whose clocks have agreed since 1970: Africa/Accra, America/Atikokan,
America/Blanc-Sablon, America/Creston, America/Curacao,
America/Nassau, America/Port_of_Spain, Antarctica/DumontDUrville,
and Antarctica/Syowa.
Commits fdd965d07 and 3cd9c3b92 tested CREATE INDEX CONCURRENTLY by
launching two separate pgbench runs concurrently. This was needed so
that only a single client thread would run CREATE INDEX CONCURRENTLY,
avoiding deadlock between two CICs. However, there's a better way,
which is to use an advisory lock to prevent concurrent CICs. That's
better in part because the test code is shorter and more readable, but
mostly because it automatically scales things to launch an appropriate
number of CICs relative to the number of INSERT transactions.
As committed, typically half to three-quarters of the CIC transactions
were pointless because the INSERT transactions had already stopped.
In passing, remove background_pgbench, which was added to support
these tests and isn't needed anymore. We can always put it back
if we find a use for it later.
Back-patch to v12; older pgbench versions lack the
conditional-execution features needed for this method.
Tom Lane and Andrey Borodin
Discussion: https://postgr.es/m/139687.1635277318@sss.pgh.pa.us
The previous coding relied on the memory for the slots being zeroed
elsewhere, which while it was true in this case is not an contract
which is guaranteed to hold. Explicitly clear the tts_isnull array
to ensure that the slots are filled from a known state.
Backpatch to v14 where the catalog multi-inserts were introduced.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAJ7c6TP0AowkUgNL6zcAK-s5HYsVHVBRWfu69FRubPpfwZGM9A@mail.gmail.com
Backpatch-through: 14
The purpose of commit 8a54e12a38 was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
CIC and REINDEX CONCURRENTLY assume backends see their catalog changes
no later than each backend's next transaction start. That failed to
hold when a backend absorbed a relevant invalidation in the middle of
running RelationBuildDesc() on the CIC index. Queries that use the
resulting index can silently fail to find rows. Fix this for future
index builds by making RelationBuildDesc() loop until it finishes
without accepting a relevant invalidation. It may be necessary to
reindex to recover from past occurrences; REINDEX CONCURRENTLY suffices.
Back-patch to 9.6 (all supported versions).
Noah Misch and Andrey Borodin, reviewed (in earlier versions) by Andres
Freund.
Discussion: https://postgr.es/m/20210730022548.GA1940096@gust.leadboat.com
The code does not expect sh_error() to return, but the patch
that made this header usable in frontend didn't get that memo.
While here, plaster unlikely() on the tests that decide whether
to invoke sh_error(), and add our standard copyright notice.
Noted by Andres Freund. Back-patch to v13 where this frontend
support came in.
Discussion: https://postgr.es/m/0D54435C-1199-4361-9D74-2FBDCF8EA164@anarazel.de
Non-global default privilege entries should be dumped as-is,
not made relative to the default ACL for their object type.
This would typically only matter if one had revoked some
on-by-default privileges in a global entry, and then wanted
to grant them again in a non-global entry.
Per report from Boris Korzun. This is an old bug, so back-patch
to all supported branches.
Neil Chen, test case by Masahiko Sawada
Discussion: https://postgr.es/m/111621616618184@mail.yandex.ru
Discussion: https://postgr.es/m/CAA3qoJnr2+1dVJObNtfec=qW4Z0nz=A9+r5bZKoTSy5RDjskMw@mail.gmail.com
For non-MSVC builds this is make's $(CURDIR), while for MSVC builds it
is $topdir/$Config/$module. The directory is added as the second element
in the PATH, so that the install location takes precedence, but the
added PATH element takes precedence over the rest of the PATH.
The reason for this is to allow tests to find built products that are
not installed, such as the libpq_pipeline test driver.
The libpq_pipeline test is adjusted to take advantage of this.
Based on a suggestion from Andres Freund.
Backpatch to release 14.
Discussion: https://postgr.es/m/4941f5a5-2d50-1a0e-6701-14c5fefe92d6@dunslane.net
Using for a new database a template database with shared dependencies
that need to be copied over was causing a corruption of pg_shdepend
because of an off-by-one computation error of the index number used for
the values inserted with a slot.
Issue introduced by e3931d0. Monitoring the rest of the code, there are
no similar mistakes.
Reported-by: Sven Klemm
Author: Aleksander Alekseev
Reviewed-by: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/CAJ7c6TP0AowkUgNL6zcAK-s5HYsVHVBRWfu69FRubPpfwZGM9A@mail.gmail.com
Backpatch-through: 14
The build scripts of Visual Studio would fail to detect properly a 3.0.0
build as the check on the second digit was failing. This is adjusted
where needed, allowing the builds to complete. Note that the MSIs of
OpenSSL mentioned in the documentation have not changed any library
names for Win32 and Win64, making this change straight-forward.
Reported-by: htalaco, via github
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/YW5XKYkq6k7OtrFq@paquier.xyz
Backpatch-through: 9.6
Commit 1b5d797cd4 intended to relax the lock level used to rename
indexes, but inadvertently allowed *any* relation to be renamed with a
lowered lock level, as long as the command is spelled ALTER INDEX.
That's undesirable for other relation types, so retry the operation with
the higher lock if the relation turns out not to be an index.
After this fix, ALTER INDEX <sometable> RENAME will require access
exclusive lock, which it didn't before.
Author: Nathan Bossart <bossartn@amazon.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Onder Kalaci <onderk@microsoft.com>
Discussion: https://postgr.es/m/PH0PR21MB1328189E2821CDEC646F8178D8AE9@PH0PR21MB1328.namprd21.prod.outlook.com
ldapsearch's deprecated -h/-p arguments were removed, need to use -H now -
which has been around for over 20 years.
As perltidy insists on reflowing the parameters anyway, change order and
"phrasing" to yield a less confusing layout (per suggestion from Tom Lane).
Discussion: https://postgr.es/m/20211009233850.wvr6apcrw2ai6cnj@alap3.anarazel.de
Backpatch: 11-, where the tests were added.
An update such as "UPDATE ... SET fld[n].subfld = whatever"
failed if the array elements were domains rather than plain
composites. That's because isAssignmentIndirectionExpr()
failed to cope with the CoerceToDomain node that would appear
in the expression tree in this case. The result would typically
be a crash, and even if we accidentally didn't crash, we'd not
correctly preserve other fields of the same array element.
Per report from Onder Kalaci. Back-patch to v11 where arrays of
domains came in.
Discussion: https://postgr.es/m/PH0PR21MB132823A46AA36F0685B7A29AD8BD9@PH0PR21MB1328.namprd21.prod.outlook.com
I think when I added this assertion (in commit 8f889b108), I was only
thinking of the use of transformExpressionList at top level of INSERT
and VALUES. But it's also called by transformRowExpr(), which can
certainly occur in an UPDATE targetlist, so it's inappropriate to
suppose that p_multiassign_exprs must be empty. Besides, since the
input is not expected to contain ResTargets, there's no reason it
should contain MultiAssignRefs either. Hence this code need not
be concerned about the state of p_multiassign_exprs, and we should
just drop the assertion.
Per bug #17236 from ocean_li_996. It's been wrong for years,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17236-3210de9bcba1d7ca@postgresql.org
If the blob TOC file cannot be parsed, the error message was failing
to print the filename as the variable holding it was shadowed by the
destination buffer for parsing. When the filename fails to parse,
the error will print an empty string:
./pg_restore -d foo -F d dump
pg_restore: error: invalid line in large object TOC file "": ..
..instead of the intended error message:
./pg_restore -d foo -F d dump
pg_restore: error: invalid line in large object TOC file "dump/blobs.toc": ..
Fix by renaming both variables as the shared name was too generic to
store either and still convey what the variable held.
Backpatch all the way down to 9.6.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/A2B151F5-B32B-4F2C-BA4A-6870856D9BDE@yesql.se
Backpatch-through: 9.6
Make sure that the string parsing is limited by the size of the
destination buffer.
In pg_basebackup the available values sent from the server
is limited to two characters so there was no risk of overflow.
In pg_dump the buffer is bounded by MAXPGPATH, and thus the limit
must be inserted via preprocessor expansion and the buffer increased
by one to account for the terminator. There is no risk of overflow
here, since in this case, the buffer scanned is smaller than the
destination buffer.
Backpatch the pg_basebackup fix to 11 where it was introduced, and
the pg_dump fix all the way down to 9.6.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/B14D3D7B-F98C-4E20-9459-C122C67647FB@yesql.se
Backpatch-through: 11 and 9.6
The grammar of this command run on indexes with column names has always
been authorized by the parser, and it has never been documented.
Since 911e702, it is possible to define opclass parameters as of CREATE
INDEX, which actually broke the old case of ALTER INDEX/TABLE where
relation-level parameters n_distinct and n_distinct_inherited could be
defined for an index (see 76a47c0 and its thread where this point has
been touched, still remained unused). Attempting to do that in v13~
would cause the index to become unusable, as there is a new dedicated
code path to load opclass parameters instead of the relation-level ones
previously available. Note that it is possible to fix things with a
manual catalog update to bring the relation back online.
This commit disables this command for now as the use of column names for
indexes does not make sense anyway, particularly when it comes to index
expressions where names are automatically computed. One way to properly
support this case properly in the future would be to use column numbers
when it comes to indexes, in the same way as ALTER INDEX .. ALTER COLUMN
.. SET STATISTICS.
Partitioned indexes were already blocked, but not indexes. Some tests
are added for both cases.
There was some code in ANALYZE to enforce n_distinct to be used for an
index expression if the parameter was defined, but just remove it for
now until/if there is support for this (note that index-level parameters
never had support in pg_dump either, previously), so this was just dead
code.
Reported-by: Matthijs van der Vleuten
Author: Nathan Bossart, Michael Paquier
Reviewed-by: Vik Fearing, Dilip Kumar
Discussion: https://postgr.es/m/17220-15d684c6c2171a83@postgresql.org
Backpatch-through: 13
Failing to do that, any direct inserts/updates of those partitions
would fail to enforce the correct constraint, that is, one that
considers the new partition constraint of their parent table.
Backpatch to 10.
Reported by: Hou Zhijie <houzj.fnst@fujitsu.com>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Nitin Jadhav <nitinjadhavpostgres@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://postgr.es/m/OS3PR01MB5718DA1C4609A25186D1FBF194089%40OS3PR01MB5718.jpnprd01.prod.outlook.com
During a replication slot creation, an ERROR generated in the same
transaction as the one creating a to-be-exported snapshot would have
left the backend in an inconsistent state, as the associated static
export snapshot state was not being reset on transaction abort, but only
on the follow-up command received by the WAL sender that created this
snapshot on replication slot creation. This would trigger inconsistency
failures if this session tried to export again a snapshot, like during
the creation of a replication slot.
Note that a snapshot export cannot happen in a transaction block, so
there is no need to worry resetting this state for subtransaction
aborts. Also, this inconsistent state would very unlikely show up to
users. For example, one case where this could happen is an
out-of-memory error when building the initial snapshot to-be-exported.
Dilip found this problem while poking at a different patch, that caused
an error in this code path for reasons unrelated to HEAD.
Author: Dilip Kumar
Reviewed-by: Michael Paquier, Zhihong Yu
Discussion: https://postgr.es/m/CAFiTN-s0zA1Kj0ozGHwkYkHwa5U0zUE94RSc_g81WrpcETB5=w@mail.gmail.com
Backpatch-through: 9.6
It was clearly the intent to do so all along, but the original coding
fat-fingered this by checking the wrong array element. We fixed it
in passing in 403a3d91c, but that later got reverted, and we forgot
to keep this bug fix.
Most of the time this'd be relatively harmless, since once we lock
any of the partitioned table's leaf partitions, that would suffice
to prevent major DDL on the partitioned table itself. However, a
childless partitioned table would get dumped with no relevant lock
whatsoever, possibly allowing dump failure or inconsistent output.
Unlike 403a3d91c, there are no versioning concerns, since every server
version that has partitioned tables will allow you to lock one.
Back-patch to v10 where partitioned tables were introduced.
Discussion: https://postgr.es/m/1018205.1634346327@sss.pgh.pa.us
An extension may want to call GetSecurityLabel() on a shared object
before the shared relcaches are fully initialized. For instance, a
ClientAuthentication_hook might want to retrieve the security label on
a role.
Discussion: https://postgr.es/m/ecb7af0b26e3be1d96d291c8453a86f1f82d9061.camel@j-davis.com
Backpatch-through: 9.6
If a function-in-FROM laterally references the output of some sub-SELECT
earlier in the FROM clause, and we are able to flatten that sub-SELECT
into the outer query, the expression(s) copied into the function RTE
missed being processed by eval_const_expressions. This'd lead to trouble
and probable crashes at execution if such expressions contained
named-argument function call syntax or functions with defaulted arguments.
The bug is masked if the query contains any explicit JOIN syntax, which
may help explain why we'd not noticed.
Per bug #17227 from Bernd Dorn. This is an oversight in commit 7266d0997,
so back-patch to v13 where that came in.
Discussion: https://postgr.es/m/17227-5a28ed1512189fa4@postgresql.org
The test code added with ff9f111bce fails under valgrind, and probably
other slow cases too, because if (say) autovacuum runs in between and
produces WAL of its own, the large INSERT fails to account for that in
the LSN calculations. Rewrite to use a DO loop.
Per complaint from Andres Freund
Backpatch to all branches.
Discussion: https://postgr.es/m/20211013180338.5guyqzpkcisqugrl@alap3.anarazel.de
Avoid calling contrib/amcheck functions with relations that are
unsuitable for checking. Specifically, don't attempt verification of
temporary relations, or indexes whose pg_index entry indicates that the
index is invalid, or not ready.
These relations are not supported by any of the contrib/amcheck
functions, for reasons that are pretty fundamental. For example, the
implementation of REINDEX CONCURRENTLY can add its own "transient"
pg_index entries, which has rather unclear implications for the B-Tree
verification functions, at least in the general case -- so they just
treat it as an error. It falls to the amcheck caller (in this case
pg_amcheck) to deal with the situation at a higher level.
pg_amcheck now simply treats these conditions as additional "visibility
concerns" when it queries system catalogs. This is a little arbitrary.
It seems to have the least problems among any of the available
alternatives.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Bug: #17212
Discussion: https://postgr.es/m/17212-34dd4a1d6bba98bf@postgresql.org
Backpatch: 14-, where pg_amcheck was introduced.
The code was freeing the name of the multirange type function stored in
the parse tree but it should not do that. Event triggers could for
example look at such a corrupted parsed tree with a ddl_command_end
event.
Author: Alex Kozhemyakin, Sergey Shinderuk
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/d5042d46-b9cd-6efb-219a-71ed0cf45bc8@postgrespro.ru
Backpatch-through: 14
This fixes a set of issues that cause different breakages or annoyances
when using pg_upgrade's test.sh to do upgrades across different major
versions:
- test.sh is completely broken when using v14 as new version because of
the removal of testtablespace/ as Makefile rule. Older versions of
pg_regress don't support --make-tablespacedir, blocking the creation of
the tablespace. In order to fix that, it is simple enough to create
those directories in the script itself, but only do that when an old
version is involved. This fix is needed on HEAD and REL_14_STABLE.
- The script would fail when using PG <= v11 as old version because of
WITH OIDS relations not supported in v12. In order to fix this, this
steals a method from the buildfarm that uses a DO block to change all
the relations marked as WITH OIDS, allowing pg_upgrade to pass. This is
more portable than using ALTER TABLE queries on the relations causing
issues. This is fixed down to v12, and authored originally by Andrew
Dunstan.
- Not using --extra-float-digits=0 with v11 as old version causes
a lot of diffs in the dumps, making the whole unreadable. This gets
only done when using v11 as old version. This is fixed down to v12.
The buildfarm code uses that already.
Note that the addition of --wal-segsize and --allow-group-access breaks
the script when using v10 or older at initdb time as these got added in
11. 10 would be EOL'd next year and nobody has complained about those
problems yet, so nothing is done about that. This means that this
commit fixes upgrade tests using test.sh with v11 as minimum older
version, up to HEAD, and that it is enough to apply this change down to
12. The old and new dumps still generate diffs, still require manual
checks, and more could be done to reduce the noise, but this allows the
tests to run with a rather minimal amount of them.
I have tested this commit and test.sh with v11 as minimum across all the
branches where this is applied. Note that this commit has no impact on
the normal pg_upgrade test run with a simple "make check".
Author: Justin Pryzby, Andrew Dunstan, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 12
Incrementing the level of the call stack reported is useful for
debugging purposes as it allows to control which part of the test is
exactly failing, especially if a test is structured with subroutines
that call routines from Test::More.
This adds more incrementations of $Test::Builder::Level where debugging
gets improved (for example it does not make sense for some paths like
pg_rewind where long subroutines are used).
A note is added to src/test/perl/README about that, based on a
suggestion from Andrew Dunstan and a wording coming from both of us.
Usage of Test::Builder::Level has spread in 12, so a backpatch down to
this version is done.
Reviewed-by: Andrew Dunstan, Peter Eisentraut, Daniel Gustafsson
Discussion: https://postgr.es/m/YV1CCFwgM1RV1LeS@paquier.xyz
Backpatch-through: 12
Previously when pg_log_backend_memory_contexts() sent the request to
the autovacuum launcher, it could take more than several seconds to
log its memory contexts. Because the function (HandleAutoVacLauncherInterrupts)
to process any new interrupts that autovacuum launcher received
didn't handle the request for logging of memory contexts. This commit changes
the function so that it handles the request, to make autovacuum launcher
more responsitve to pg_log_backend_memory_contexts().
Back-patch to v14 where pg_log_backend_memory_contexts() was added.
Author: Koyu Tanigawa
Reviewed-by: Bharath Rupireddy, Atsushi Torikoshi
Discussion: https://postgr.es/m/0aae3e074face409b35153451be5cc11@oss.nttdata.com
Commit 3f50b8263 had an oversight: formerly, to deparse expressions
attached to a plan node, it was only necessary to update the
deparse_namespace ancestors list alongside calling set_deparse_plan.
Now it's necessary to update the ancestors list *first*, because
set_deparse_plan consults it, and one call site got that wrong.
This error was masked in most cases because explain.c uses just one
List object for the ancestors list, updating it in-place as the plan
is scanned, so that we accidentally had the right List assigned to
dpns->ancestors before it was needed. It would fail only if a
WorkTableScan node were the first one that we tried to deparse a
subexpression of.
Per report from Markus Winand. Like the previous patch,
back-patch to v14.
Discussion: https://postgr.es/m/648B0505-AA57-42C2-A2DA-E551DE46FA15@winand.at
This fixes a loss of precision that occurs when the first input is
very close to 1, so that its logarithm is very small.
Formerly, during the initial low-precision calculation to estimate the
result weight, the logarithm was computed to a local rscale that was
capped to NUMERIC_MAX_DISPLAY_SCALE (1000). However, the base may be
as close as 1e-16383 to 1, hence its logarithm may be as small as
1e-16383, and so the local rscale needs to be allowed to exceed 16383,
otherwise all precision is lost, leading to a poor choice of rscale
for the full-precision calculation.
Fix this by removing the cap on the local rscale during the initial
low-precision calculation, as we already do in the full-precision
calculation. This doesn't change the fact that the initial calculation
is a low-precision approximation, computing the logarithm to around 8
significant digits, which is very fast, especially when the base is
very close to 1.
Patch by me, reviewed by Alvaro Herrera.
Discussion: https://postgr.es/m/CAEZATCV-Ceu%2BHpRMf416yUe4KKFv%3DtdgXQAe5-7S9tD%3D5E-T1g%40mail.gmail.com
3c5b0685b9 used setFilePointer() to set the position of the filehandle, but
passed the wrong filehandle, always leaving the position at 0. Instead of just
fixing that, remove use of setFilePointer(), we have a perl fd at this point,
so we can just use perl's seek().
Additionally, the perl filehandle wasn't closed, just the windows filehandle.
Reviewed-By: Andrew Dunstan <andrew@dunslane.net>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20211003173038.64mmhgxctfqn7wl6@alap3.anarazel.de
Backpatch: 9.6-, like 3c5b0685b9
Per discussion, let's just follow CLDR's default zone mappings
faithfully. There are two changes here that are clear improvements:
* Mapping "Greenwich Standard Time" to Atlantic/Reykjavik is actually
a better fit than using London, because Iceland hasn't observed DST
since 1968, so this is more nearly what people might expect.
* Since the "Samoa" zone is specified to be UTC+13:00, we must map
it to Pacific/Apia not Pacific/Samoa; the latter refers to American
Samoa which is now on the other side of the date line.
The rest of these changes look like they're choosing the most populous
IANA zone as representative. Whatever the details, we're just going
to say "if you don't like this mapping, complain to CLDR".
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
Some specific logic is done at the end of recovery when involving 2PC
transactions:
1) Call RecoverPreparedTransactions(), to recover the state of 2PC
transactions into memory (re-acquire locks, etc.).
2) ShutdownRecoveryTransactionEnvironment(), to move back to normal
operations, mainly cleaning up recovery locks and KnownAssignedXids
(including any 2PC transaction tracked previously).
3) Switch XLogCtl->SharedRecoveryState to RECOVERY_STATE_DONE, which is
the tipping point for any process calling RecoveryInProgress() to check
if the cluster is still in recovery or not.
Any snapshot taken between steps 2) and 3) would be empty, causing any
transaction relying on a snapshot at this point to potentially corrupt
data as there could still be some 2PC transactions to track, with
RecentXmin moving backwards on successive calls to GetSnapshotData() in
the same transaction.
As SharedRecoveryState is the point to take into account to know if it
is safe to discard KnownAssignedXids, this commit moves step 2) after
step 3), so as we can never finish with empty snapshots.
This exists since the introduction of hot standby, so backpatch all the
way down. The window with incorrect snapshots is extremely small, but I
have seen it when running 023_pitr_prepared_xact.pl, as did buildfarm
member fairywren. Thomas Munro also found it independently. Special
thanks to Andres Freund for taking the time to analyze this issue.
Reported-by: Thomas Munro, Michael Paquier
Analyzed-by: Andres Freund
Discussion: https://postgr.es/m/20210422203603.fdnh3fu2mmfp2iov@alap3.anarazel.de
Backpatch-through: 9.6
Prior to v14, we insisted that the query in RETURN QUERY be of a type
that returns tuples. (For instance, INSERT RETURNING was allowed,
but not plain INSERT.) That happened indirectly because we opened a
cursor for the query, so spi.c checked SPI_is_cursor_plan(). As a
consequence, the error message wasn't terribly on-point, but at least
it was there.
Commit 2f48ede08 lost this detail. Instead, plain RETURN QUERY
insisted that the query be a SELECT (by checking for SPI_OK_SELECT)
while RETURN QUERY EXECUTE failed to check the query type at all.
Neither of these changes was intended.
The only convenient place to check this in the EXECUTE case is inside
_SPI_execute_plan, because we haven't done parse analysis until then.
So we need to pass down a flag saying whether to enforce that the
query returns tuples. Fortunately, we can squeeze another boolean
into struct SPIExecuteOptions without an ABI break, since there's
padding space there. (It's unlikely that any extensions would
already be using this new struct, but preserving ABI in v14 seems
like a smart idea anyway.)
Within spi.c, it seemed like _SPI_execute_plan's parameter list
was already ridiculously long, and I didn't want to make it longer.
So I thought of passing SPIExecuteOptions down as-is, allowing that
parameter list to become much shorter. This makes the patch a bit
more invasive than it might otherwise be, but it's all internal to
spi.c, so that seems fine.
Per report from Marc Bachmann. Back-patch to v14 where the
faulty code came in.
Discussion: https://postgr.es/m/1F2F75F0-27DF-406F-848D-8B50C7EEF06A@gmail.com
This corrects a bunch of entries in win32_tzmap[], and adds a few
new ones, based on the CLDR project's windowsZones.xml file.
Non-cosmetic changes fall into four main categories:
* Flat-out errors:
US/Aleutan doesn't exist
America/Salvador doesn't exist
Asia/Baku is wrong for Yerevan
Asia/Dhaka (Bangladesh) is wrong for Astana (Kazakhstan)
Europe/Bucharest is wrong for Chisinau
America/Mexico_City is wrong for Chetumal
America/Buenos_Aires is wrong for Cayenne
America/Caracas has its own zone, so poor fit for La Paz
US/Eastern is wrong for Haiti
US/Eastern is wrong for Indiana (East)
Asia/Karachi is wrong for Tashkent
Etc/UTC+12 doesn't exist
Signs of Etc/GMT zones were backwards
* Judgment calls:
(These changes follow CLDR's choices, except for the first one)
Use Europe/London for "Greenwich Standard Time", since that seems much
more likely than Africa/Casablanca to be what people will think that
zone name means. CLDR has Atlantic/Reykjavik here, but that's no better.
Asia/Shanghai seems a better fit than Hong Kong for "China Standard
Time".
Europe/Sarajevo is now a link to Belgrade, ie "Central Europe Standard
Time"; so use Warsaw for "Central European Standard Time".
America/Sao_Paulo seems more representative than Araguaina for
"E. South America Standard Time".
Africa/Johannesburg seems more representative than Harare for
"South Africa Standard Time".
* New Windows zone names:
"Israel Standard Time"
"Kaliningrad Standard Time"
"Russia Time Zone N" for various N
"Singapore Standard Time"
"South Sudan Standard Time"
"W. Central Africa Standard Time"
"West Bank Standard Time"
"Yukon Standard Time"
Some of these replace older spellings, but I kept the older spellings
too in case our code runs on a machine with the older data.
* Replace aliases (tzdb Links) with underlying city-named zones:
(This tracks tzdb's longstanding practice, and reduces inconsistency
with the rest of the entries, as well as with CLDR.)
US/Alaska
Asia/Kuwait
Asia/Muscat
Canada/Atlantic
Australia/Canberra
Canada/Saskatchewan
US/Central
US/Eastern
US/Hawaii
US/Mountain
Canada/Newfoundland
US/Pacific
Back-patch to all supported branches, as is our usual practice for
time zone data updates.
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
The original intent seems to have been to sort case-insensitively
by the Windows zone name, but various changes over the years did
not get that memo. This commit just moves a few entries to
restore exact alphabetic order, to ease comparison to the outputs
of processing scripts.
Back-patch to all supported branches, as is our usual practice for
time zone data updates.
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
The previous approach didn't really work on windows, due to the PATH separator
being ';' not ':'. Instead of making the PATH change more complicated,
reference the binary using the TESTDIR environment.
Reported-By: Andres Freund <andres@anarazel.de>
Suggested-By: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20210930214040.odkdd42vknvzifm6@alap3.anarazel.de
Backpatch: 14-, where the test was introduced.
Commit ff9f111bce added some test code that's unportable and doesn't
add meaningful coverage. Remove it rather than try and get it to work
everywhere.
While at it, fix a typo in a log message added by the aforementioned
commit.
Backpatch to 14.
Discussion: https://postgr.es/m/3000074.1632947632@sss.pgh.pa.us
The intermittent h buffer was not freed, causing it to leak. Backpatch
through 14 where HMAC was refactored to the current API.
Author: Sergey Shinderuk <s.shinderuk@postgrespro.ru>
Discussion: https://postgr.es/m/af07e620-7e28-a742-4637-2bc44aa7c2be@postgrespro.ru
Backpatch-through: 14
get_variable_range() would incautiously believe that statistics
containing only an MCV list are sufficient to derive a range estimate.
That's okay for an enum-like column that contains only MCVs, but
otherwise the estimate could be pretty bad. Make it report that the
range is indeterminate unless the MCVs plus nullfrac account for
the whole table.
I don't think this needs a dedicated test case, since a quick code
coverage check verifies that the existing regression tests traverse
all the alternatives. There is room to doubt that a future-proof
test case could be built anyway, given that the submitted example
accidentally doesn't fail before v11.
Per bug #17207 from Simon Perepelitsa. Back-patch to v10.
In principle this has been broken all along, but I'm hesitant to
make such changes in 9.6, since if anyone is unhappy with 9.6.24's
behavior there will be no second chance to fix it.
Discussion: https://postgr.es/m/17207-5265aefa79e333b4@postgresql.org
Commit 84f5c2908 forgot to consider the possibility that
EnsurePortalSnapshotExists could run inside a subtransaction with
lifespan shorter than the Portal's. In that case, the new active
snapshot would be popped at the end of the subtransaction, leaving
a dangling pointer in the Portal, with mayhem ensuing.
To fix, make sure the ActiveSnapshot stack entry is marked with
the same subtransaction nesting level as the associated Portal.
It's certainly safe to do so since we won't be here at all unless
the stack is empty; hence we can't create an out-of-order stack.
Let's also apply this logic in the case where PortalRunUtility
sets portalSnapshot, just to be sure that path can't cause similar
problems. It's slightly less clear that that path can't create
an out-of-order stack, so add an assertion guarding it.
Report and patch by Bertrand Drouvot (with kibitzing by me).
Back-patch to v11, like the previous commit.
Discussion: https://postgr.es/m/ff82b8c5-77f4-3fe7-6028-fcf3303e82dd@amazon.com
Computing related timestamps by subtracting "N days" is sensitive
to the prevailing timezone, since we interpret that as "same local
time on the N'th prior day". Even though the intervals in question
are only two to four days, through remarkable bad luck they managed
to cross the end of Ramadan in 2014, causing the test's output to
change if timezone is set to Africa/Casablanca. (Maybe in other
Muslim areas as well; I didn't check.) There's absolutely no reason
for this test to exercise interval subtraction, so just get rid of
that and use plain timestamptz constants representing the intended
values.
Per report from Andres Freund. Back-patch to v10 where this test
script came in.
Discussion: https://postgr.es/m/20210930183641.7lh4jhvpipvromca@alap3.anarazel.de
First, as pointed out by Tom Lane and Michael Paquier, I failed to
realize that Windows' PostgresNode needs an extra pg_hba.conf line
(added by PostgresNode->set_replication_conf, called internally by
->init() when 'allows_streaming=>1' is given -- but I purposefully
omitted that). I think a good fix should be to have nodes with only
'has_archiving=>1' set up for replication too, but that's a bigger
discussion. Fix it by calling ->set_replication_conf, which is not
unprecedented, as pointed out by Andrew Dunstan.
I also forgot to uncomment a ->finish() call for a pumpable IPC::Run
file descriptor. Apparently this is innocuous in almost all platforms.
Backpatch to 14. The older branches were added this file too, but not
this particular part of the test.
Discussion: https://postgr.es/m/3000074.1632947632@sss.pgh.pa.us
Discussion: https://postgr.es/m/YVT7qwhR8JmC2kfz@paquier.xyz
Physical replication always ships WAL segment files to replicas once
they are complete. This is a problem if one WAL record is split across
a segment boundary and the primary server crashes before writing down
the segment with the next portion of the WAL record: WAL writing after
crash recovery would happily resume at the point where the broken record
started, overwriting that record ... but any standby or backup may have
already received a copy of that segment, and they are not rewinding.
This causes standbys to stop following the primary after the latter
crashes:
LOG: invalid contrecord length 7262 at A8/D9FFFBC8
because the standby is still trying to read the continuation record
(contrecord) for the original long WAL record, but it is not there and
it will never be. A workaround is to stop the replica, delete the WAL
file, and restart it -- at which point a fresh copy is brought over from
the primary. But that's pretty labor intensive, and I bet many users
would just give up and re-clone the standby instead.
A fix for this problem was already attempted in commit 515e3d84a0, but
it only addressed the case for the scenario of WAL archiving, so
streaming replication would still be a problem (as well as other things
such as taking a filesystem-level backup while the server is down after
having crashed), and it had performance scalability problems too; so it
had to be reverted.
This commit fixes the problem using an approach suggested by Andres
Freund, whereby the initial portion(s) of the split-up WAL record are
kept, and a special type of WAL record is written where the contrecord
was lost, so that WAL replay in the replica knows to skip the broken
parts. With this approach, we can continue to stream/archive segment
files as soon as they are complete, and replay of the broken records
will proceed across the crash point without a hitch.
Because a new type of WAL record is added, users should be careful to
upgrade standbys first, primaries later. Otherwise they risk the standby
being unable to start if the primary happens to write such a record.
A new TAP test that exercises this is added, but the portability of it
is yet to be seen.
This has been wrong since the introduction of physical replication, so
backpatch all the way back. In stable branches, keep the new
XLogReaderState members at the end of the struct, to avoid an ABI
break.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/202108232252.dh7uxf6oxwcy@alvherre.pgsql
Previously socket errors such as invalid socket or socket wait method failures
during benchmark caused pgbench to exit with status 0. Instead, errors during
the run should result in exit status 2.
Back-patch to v12 where pgbench started reporting exit status.
Original complaint and patch by Hayato Kuroda.
Author: Yugo Nagata, Fabien COELHO
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/TYCPR01MB5870057375ACA8A73099C649F5349@TYCPR01MB5870.jpnprd01.prod.outlook.com
The failure of socket wait method like "select()" doesn't terminate pgbench.
So the log level of error message when that failure happens should be ERROR.
But previously FATAL was used in that case.
Back-patch to v13 where pgbench started using common logging API.
Author: Yugo Nagata, Fabien COELHO
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/20210617005934.8bd37bf72efd5f1b38e6f482@sraoss.co.jp
The code inconsistently used "statistic object" or "statistics" where
the correct term, as discussed, is actually "statistics object". This
improves the state of the code to be more consistent.
While on it, fix an incorrect error message introduced in a4d75c8. This
error should never happen, as the code states, but it would be
misleading.
Author: Justin Pryzby
Reviewed-by: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/20210924215827.GS831@telsasoft.com
Backpatch-through: 14
That allows to include just visibilitymapdefs.h from file.c, and in turn,
remove include of postgres.h from relcache.h.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20210913232614.czafiubr435l6egi%40alap3.anarazel.de
Author: Alexander Korotkov
Reviewed-by: Andres Freund, Tom Lane, Alvaro Herrera
Backpatch-through: 13
Calculating degree of a functional dependency may allocate a lot of
memory - we have released mot of the explicitly allocated memory, but
e.g. detoasted varlena values were left behind. That may be an issue,
because we consider a lot of dependencies (all combinations), and the
detoasting may happen for each one again.
Fixed by calling dependency_degree() in a dedicated context, and
resetting it after each call. We only need the calculated dependency
degree, so we don't need to copy anything.
Backpatch to PostgreSQL 10, where extended statistics were introduced.
Backpatch-through: 10
Discussion: https://www.postgresql.org/message-id/20210915200928.GP831%40telsasoft.com
Until now, all extended statistics on a given relation were built in the
same memory context, without resetting. Some of the memory was released
explicitly, but not all of it - for example memory allocated while
detoasting values is hard to free. This is how it worked since extended
statistics were introduced in PostgreSQL 10, but adding support for
extended stats on expressions made the issue somewhat worse as it
increases the number of statistics to build.
Fixed by adding a memory context which gets reset after building each
statistics object (all the statistics kinds included in it). Resetting
it after building each statistics kind would be even better, but it
would require more invasive changes and copying of results, making it
harder to backpatch.
Backpatch to PostgreSQL 10, where extended statistics were introduced.
Author: Justin Pryzby
Reported-by: Justin Pryzby
Reviewed-by: Tomas Vondra
Backpatch-through: 10
Discussion: https://www.postgresql.org/message-id/20210915200928.GP831%40telsasoft.com
Updates/Deletes on a partition were allowed even without replica identity
after the parent table was added to a publication. This would later lead
to an error on subscribers. The reason was that we were not invalidating
the partition's relcache and the publication information for partitions
was not getting rebuilt. Similarly, we were not invalidating the
partitions' relcache after dropping a partitioned table from a publication
which will prohibit Updates/Deletes on its partition without replica
identity even without any publication.
Reported-by: Haiying Tang
Author: Hou Zhijie and Vignesh C
Reviewed-by: Vignesh C and Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/OS0PR01MB6113D77F583C922F1CEAA1C3FBD29@OS0PR01MB6113.jpnprd01.prod.outlook.com
It is not appropriate for deduplication to apply single value strategy
when triggered by a bottom-up index deletion pass. This wastes cycles
because later bottom-up deletion passes will overinterpret older
duplicate tuples that deduplication actually just skipped over "by
design". It also makes bottom-up deletion much less effective for low
cardinality indexes that happen to cross a meaningless "index has single
key value per leaf page" threshold.
To fix, slightly narrow the conditions under which deduplication's
single value strategy is considered. We already avoided the strategy
for a unique index, since our high level goal must just be to buy time
for VACUUM to run (not to buy space). We'll now also avoid it when we
just had a bottom-up pass that reported failure. The two cases share
the same high level goal, and already overlapped significantly, so this
approach is quite natural.
Oversight in commit d168b666, which added bottom-up index deletion.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznaOvM+Gyj-JQ0X=JxoMDxctDTYjiEuETdAGbF5EUc3MA@mail.gmail.com
Backpatch: 14-, where bottom-up deletion was introduced.
Contrary to the output of native perl, Msys perl generates outputs with
CRLFs characters. There are already places in the TAP code where CRLFs
(\r\n) are automatically converted to LF (\n) on Msys, but we missed a
couple of places when running commands and using their output for
comparison, that would lead to failures.
This problem has been found thanks to the test added in 5adb067 using
TestLib::command_checks_all(), but after a closer look more code paths
were missing a filter.
This is backpatched all the way down to prevent any surprises if a new
test is introduced in stable branches.
Reviewed-by: Andrew Dunstan, Álvaro Herrera
Discussion: https://postgr.es/m/1252480.1631829409@sss.pgh.pa.us
Backpatch-through: 9.6
Before commit 84f5c2908, a STABLE function in a plpgsql CALL
statement's argument list would see an up-to-date snapshot,
because exec_stmt_call would push a new snapshot. I got rid of
that because the possibility of the snapshot disappearing within
COMMIT made it too hard to manage a snapshot across the CALL
statement. That's fine so far as the procedure itself goes,
but I forgot to think about the possibility of STABLE functions
within the CALL argument list. As things now stand, those'll
be executed with the Portal's snapshot as ActiveSnapshot,
keeping them from seeing updates more recent than Portal startup.
(VOLATILE functions don't have a problem because they take their
own snapshots; which indeed is also why the procedure itself
doesn't have a problem. There are no STABLE procedures.)
We can fix this by pushing a new snapshot transiently within
ExecuteCallStmt itself. Popping the snapshot before we get
into the procedure proper eliminates the management problem.
The possibly-useless extra snapshot-grab is slightly annoying,
but it's no worse than what happened before 84f5c2908.
Per bug #17199 from Alexander Nawratil. Back-patch to v11,
like the previous patch.
Discussion: https://postgr.es/m/17199-1ab2561f0d94af92@postgresql.org
I noticed that commit 0bead9af48 left this flag undocumented in
XLogSetRecordFlags, which led me to discover that the flag doesn't
actually do what the one comment on it said it does. Improve the
situation by adding some more comments.
Backpatch to 14, where the aforementioned commit appears.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202109212119.c3nhfp64t2ql@alvherre.pgsql
A broken HOT chain is not an unexpected condition, even when the offset
number points past the end of the page's line pointer array.
heap_prune_chain() does not (and never has) treated this condition as
unexpected, so derivative code in heap_index_delete_tuples() shouldn't
do so either.
Oversight in commit 4228817449.
The assertion can probably only fail on Postgres 14 and master. Earlier
releases don't have commit 3c3b8a4b, which taught VACUUM to truncate the
line pointer array of heap pages. Backpatch all the same, just to be
consistent.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17197-9438f31f46705182@postgresql.org
Backpatch: 12-, just like commit 4228817449.
Since introduction of extended statistics, we've disallowed references
to system columns. So for example
CREATE STATISTICS s ON ctid FROM t;
would fail. But with extended statistics on expressions, it was possible
to work around this limitation quite easily
CREATE STATISTICS s ON (ctid::text) FROM t;
This is an oversight in a4d75c86bf, fixed by adding a simple check.
Backpatch to PostgreSQL 14, where support for extended statistics on
expressions was introduced.
Backpatch-through: 14
Discussion: https://postgr.es/m/20210816013255.GS10479%40telsasoft.com
Commit 55dc86eca changed pull_varnos to use (if possible) the associated
ph_eval_at for a PlaceHolderVar. I missed a fine point though: we might
be looking at a PHV in the quals or tlist of a child appendrel, in which
case we need to compute a ph_eval_at value that's been translated in the
same way that the PHV itself has been (cf. adjust_appendrel_attrs).
Fortunately, enough info is available in the PlaceHolderInfo to make
such translation possible without additional outside data, so we don't
need another round of uglification of planner APIs. This is a little
bit complicated, but since it's a hard-to-hit corner case, I'm not much
worried about adding cycles here.
Per report from Jaime Casanova. Back-patch to v12, like the previous
commit.
Discussion: https://postgr.es/m/20210915230959.GB17635@ahch-to
The rewriter transformation for SEARCH BREADTH FIRST produces a
FieldSelect on a Var of type RECORD, where the Var references the
recursive union's worktable output. EXPLAIN VERBOSE failed to handle
this case, because it only expected such Vars to appear in CteScans
not WorkTableScans. Fix that, and add some test cases exercising
EXPLAIN on SEARCH and CYCLE queries.
In principle this oversight is an old bug, but it seems that the
case is unreachable without SEARCH BREADTH FIRST, because the
parser fails when attempting to create such a reference manually.
So for today I'll just patch HEAD/v14. Someday we might find that
the code portion of this patch needs to be back-patched further.
Per report from Atsushi Torikoshi.
Discussion: https://postgr.es/m/5bafa66ad529e11860339565c9e7c166@oss.nttdata.com
Session statistics, as introduced by 960869da08, had several shortcomings:
- an additional GetCurrentTimestamp() call that also impaired the accuracy of
the data collected
This can be avoided by passing the current timestamp we already have in
pgstat_report_stat().
- an additional statistics UDP packet sent every 500ms
This is solved by adding the new statistics to PgStat_MsgTabstat.
This is conceptually ugly, because session statistics are not
table statistics. But the struct already contains data unrelated
to tables, so there is not much damage done.
Connection and disconnection are reported in separate messages, which
reduces the number of additional messages to two messages per session and a
slight increase in PgStat_MsgTabstat size (but the same number of table
stats fit).
- Session time computation could overflow on systems where long is 32 bit.
Reported-By: Andres Freund <andres@anarazel.de>
Author: Andres Freund <andres@anarazel.de>
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/20210801205501.nyxzxoelqoo4x2qc%40alap3.anarazel.de
Backpatch: 14-, where the feature was introduced.
ProcArrayGroupClearXid function has a parameter named "proc",
but the same name was used for its local variables. This commit fixes
this variable shadowing, to improve code readability.
Back-patch to all supported versions, to make future back-patching
easy though this patch is classified as refactoring only.
Reported-by: Ranier Vilela
Author: Ranier Vilela, Aleksander Alekseev
https://postgr.es/m/CAEudQAqyoTZC670xWi6w-Oe2_Bk1bfu2JzXz6xRfiOUzm7xbyQ@mail.gmail.com
All size_t variables declared in procarray.c are actually int ones.
Let's use int instead of size_t for those variables. Which would
reduce Wsign-compare compiler warnings.
Back-patch to v14 where commit 941697c3c1 added size_t variables
in procarray.c, to make future back-patching easy though
this patch is classified as refactoring only.
Reported-by: Ranier Vilela
Author: Ranier Vilela, Aleksander Alekseev
https://postgr.es/m/CAEudQAqyoTZC670xWi6w-Oe2_Bk1bfu2JzXz6xRfiOUzm7xbyQ@mail.gmail.com
It's possible to execute user-defined SQL in some background processes;
for example, logical replication workers can fire triggers. This opens
the possibility that someone would try to execute LISTEN in such a
context. But since only regular backends ever call
ProcessNotifyInterrupt, no messages would actually be received, and
thus the registered listener would simply prevent the message queue
from being cleaned. Eventually NOTIFY would stop working, which is bad.
Perhaps someday somebody will invent infrastructure to make listening
in a background worker actually useful. In the meantime, forbid it.
Back-patch to v13, which is where we introduced the MyBackendType
variable. It'd be a lot harder to implement the check without that,
and it doesn't seem worth the trouble.
Discussion: https://postgr.es/m/153243441449.1404.2274116228506175596@wrigleys.postgresql.org
Formerly, we sent signals for outgoing NOTIFY messages within
ProcessCompletedNotifies, which was also responsible for sending
relevant ones of those messages to our connected client. It therefore
had to run during the main-loop processing that occurs just before
going idle. This arrangement had two big disadvantages:
* Now that procedures allow intra-command COMMITs, it would be
useful to send NOTIFYs to other sessions immediately at COMMIT
(though, for reasons of wire-protocol stability, we still shouldn't
forward them to our client until end of command).
* Background processes such as replication workers would not send
NOTIFYs at all, since they never execute the client communication
loop. We've had requests to allow triggers running in replication
workers to send NOTIFYs, so that's a problem.
To fix these things, move transmission of outgoing NOTIFY signals
into AtCommit_Notify, where it will happen during CommitTransaction.
Also move the possible call of asyncQueueAdvanceTail there, to
ensure we don't bloat the async SLRU if a background worker sends
many NOTIFYs with no one listening.
We can also drop the call of asyncQueueReadAllNotifications,
allowing ProcessCompletedNotifies to go away entirely. That's
because commit 790026972 added a call of ProcessNotifyInterrupt
adjacent to PostgresMain's call of ProcessCompletedNotifies,
and that does its own call of asyncQueueReadAllNotifications,
meaning that we were uselessly doing two such calls (inside two
separate transactions) whenever inbound notify signals coincided
with an outbound notify. We need only set notifyInterruptPending
to ensure that ProcessNotifyInterrupt runs, and we're done.
The existing documentation suggests that custom background workers
should call ProcessCompletedNotifies if they want to send NOTIFY
messages. To avoid an ABI break in the back branches, reduce it
to an empty routine rather than removing it entirely. Removal
will occur in v15.
Although the problems mentioned above have existed for awhile,
I don't feel comfortable back-patching this any further than v13.
There was quite a bit of churn in adjacent code between 12 and 13.
At minimum we'd have to also backpatch 51004c717, and a good deal
of other adjustment would also be needed, so the benefit-to-risk
ratio doesn't look attractive.
Per bug #15293 from Michael Powers (and similar gripes from others).
Artur Zakirov and Tom Lane
Discussion: https://postgr.es/m/153243441449.1404.2274116228506175596@wrigleys.postgresql.org
It's possible for us to copy an AlternativeSubPlan expression node
into multiple places, for example the scan quals of several
partition children. Then it's possible that we choose a different
one of the alternatives as optimal in each place. Commit 41efb8340
failed to consider this scenario, so its attempt to remove "unused"
subplans could remove subplans that were still used elsewhere.
Fix by delaying the removal logic until we've examined all the
AlternativeSubPlans in a given query level. (This does assume that
AlternativeSubPlans couldn't get copied to other query levels, but
for the foreseeable future that's fine; cf qual_is_pushdown_safe.)
Per report from Rajkumar Raghuwanshi. Back-patch to v14
where the faulty logic came in.
Discussion: https://postgr.es/m/CAKcux6==O3NNZC3bZ2prRYv3cjm3_Zw1GfzmOjEVqYN4jub2+Q@mail.gmail.com
If an allocation failed within LLVM it is not safe to call back into LLVM as
LLVM is not generally safe against exceptions / stack-unwinding. Thus errors
while in LLVM code are promoted to FATAL. However llvm_shutdown() did call
back into LLVM even in such cases, while llvm_release_context() was careful
not to do so.
We cannot generally skip shutting down LLVM, as that can break profiling. But
it's OK to do so if there was an error from within LLVM.
Reported-By: Jelte Fennema <Jelte.Fennema@microsoft.com>
Author: Andres Freund <andres@anarazel.de>
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/AM5PR83MB0178C52CCA0A8DEA0207DC14F7FF9@AM5PR83MB0178.EURPRD83.prod.outlook.com
Backpatch: 11-, where jit was introduced
In d9d8aa9bb9 I added a defensive NULL assignment to protect against a
not-too-smart compiler warning about unitialized variable use after the
switch. Unfortunately I only did so on master and forgot to adjust that for
14.
Stephen noticed that there actually is a compiler warning :(.
Reported-By: Stephen Frost <sfrost@snowman.net>
Discussion: https://postgr.es/m/20210827224639.GX17906@tamriel.snowman.net
Commits ffa2e4670 and 52a10224e caused libpq's connection-establishment
functions to usually leave a nonempty string in the connection's
errorMessage buffer, even after a successful connection. While that
was intentional on my part, more sober reflection says that it wasn't
a great idea: the string would be a bit confusing. Also this broke at
least one application that checked for connection success by examining
the errorMessage, instead of using PQstatus() as documented. Let's
clear the buffer at success exit, restoring the pre-v14 behavior.
Discussion: https://postgr.es/m/4170264.1620321747@sss.pgh.pa.us
Ordinarily, using EXIT this way would draw "control reached end of
function without RETURN". However, if the function is one where we
don't require an explicit RETURN (such as a DO block), that should
not happen. It did anyway, because add_dummy_return() neglected to
account for the case.
Per report from Herwig Goemans. Back-patch to all supported branches.
Discussion: https://postgr.es/m/868ae948-e3ca-c7ec-95a6-83cfc08ef750@gmail.com
While processing toast changes in logical decoding, we rejigger the
tuple change to point to in-memory toast tuples instead to on-disk toast
tuples. And, to make sure the memory accounting is correct, we were
subtracting the old change size and then after re-computing the new tuple,
re-adding its size at the end. Now, if there is any error before we add
the new size, we will release the changes and that will update the
accounting info (subtracting the size from the counters). And we were
underflowing there which leads to an assertion failure in assert enabled
builds and wrong memory accounting in reorder buffer otherwise.
Author: Bertrand Drouvot
Reviewed-by: Amit Kapila
Backpatch-through: 13, where memory accounting was introduced
Discussion: https://postgr.es/m/92b0ee65-b8bd-e42d-c082-4f3f4bf12d34@amazon.com
An out-of-memory failure happening when allocating the structures to
store the connection parameter keywords and values would mess up with
the set of connections saved, as on failure the pthread mutex would
still be hold with the new connection object listed but free()'d.
Rather than just unlocking the mutex, which would leave the static list
of connections into an inconsistent state, move the allocation for the
structures of the connection parameters before beginning the test
manipulation. This ensures that the list of connections and the
connection mutex remain consistent all the time in this code path.
This error is unlikely going to happen, but this could mess up badly
with ECPG clients in surprising ways, so backpatch all the way down.
Reported-by: ryancaicse
Discussion: https://postgr.es/m/17186-b4cfd8f0eb4d1dee@postgresql.org
Backpatch-through: 9.6
If search_start is greater than the length of the string, we should just
return REG_NOMATCH immediately. (Note that the equality case should
*not* be rejected, since the pattern might be able to match zero
characters.) This guards various internal assumptions that the min of a
range of string positions is not more than the max. Violation of those
assumptions could allow an attempt to fetch string[search_start-1],
possibly causing a crash.
Jaime Casanova pointed out that this situation is reachable with the
new regexp_xxx functions that accept a user-specified start position.
I don't believe it's reachable via any in-core call site in v14 and
below. However, extensions could possibly call pg_regexec with an
out-of-range search_start, so let's back-patch the fix anyway.
Discussion: https://postgr.es/m/20210911180357.GA6870@ahch-to
We have long forbidden fetching backwards from a NO SCROLL cursor,
but the prohibition didn't extend to cases in which we rewind the
query altogether and then re-fetch forwards. I think the reason is
that this logic was mainly meant to protect plan nodes that can't
be run in the reverse direction. However, re-reading the query output
is problematic if the query is volatile (which includes SELECT FOR
UPDATE, not just queries with volatile functions): the re-read can
produce different results, which confuses the cursor navigation logic
completely. Another reason for disliking this approach is that some
code paths will either fetch backwards or rewind-and-fetch-forwards
depending on the distance to the target row; so that seemingly
identical use-cases may or may not draw the "cursor can only scan
forward" error. Hence, let's clean things up by disallowing rewind
as well as fetch-backwards in a NO SCROLL cursor.
Ordinarily we'd only make such a definitional change in HEAD, but
there is a third reason to consider this change now. Commit ba2c6d6ce
created some new user-visible anomalies for non-scrollable cursors
WITH HOLD, in that navigation in the cursor result got confused if the
cursor had been partially read before committing. The only good way
to resolve those anomalies is to forbid rewinding such a cursor, which
allows removal of the incorrect cursor state manipulations that
ba2c6d6ce added to PersistHoldablePortal.
To minimize the behavioral change in the back branches (including
v14), refuse to rewind a NO SCROLL cursor only when it has a holdStore,
ie has been held over from a previous transaction due to WITH HOLD.
This should avoid breaking most applications that have been sloppy
about whether to declare cursors as scrollable. We'll enforce the
prohibition across-the-board beginning in v15.
Back-patch to v11, as ba2c6d6ce was.
Discussion: https://postgr.es/m/3712911.1631207435@sss.pgh.pa.us
Some plan node types don't react well to being called again after
they've already returned NULL. PortalRunSelect() has long dealt
with this by calling the executor with NoMovementScanDirection
if it sees that we've already run the portal to the end. However,
commit ba2c6d6ce overlooked this point, so that persisting an
already-fully-fetched cursor would fail if it had such a plan.
Per report from Tomas Barton. Back-patch to v11, as the faulty
commit was. (I've omitted a test case because the type of plan
that causes a problem isn't all that stable.)
Discussion: https://postgr.es/m/CAPV2KRjd=ErgVGbvO2Ty20tKTEZZr6cYsYLxgN_W3eAo9pf5sw@mail.gmail.com
When throttling is used, transactions that lag behind schedule by
more than the latency limit are counted and reported as skipped.
Previously, there was the case where pgbench counted all skipped
transactions even if the timer specified in -T option was exceeded.
This could take a very long time to do that especially when unrealistically
high rate setting in -R option caused quite a lot of transactions that
lagged behind schedule. This could prevent pgbench from ending
immediately, and so pgbench could look like it got stuck to users.
To fix the issue, this commit changes pgbench so that it stops counting
skipped transactions as soon as the timer is exceeded. The timer can
make pgbench end soon even when there are lots of skipped transactions
that have not been counted yet.
Note that there is no guarantee that all skipped transactions are
counted under -T though there is under -t. This is OK in practice
because it's very unlikely to happen with realistic setting. Also this is
not the issue that this commit newly introdues. There used to be
the case where pgbench ended without counting all skipped
transactions since before.
Back-patch to v14. Per discussion, we decided not to bother
back-patch to the stable branches because it's hard to imagine
the issue happens in practice (with realistic setting).
Author: Yugo Nagata, Fabien COELHO
Reviewed-by: Greg Sabino Mullane, Fujii Masao
Discussion: https://postgr.es/m/20210613040151.265ff59d832f835bbcf8b3ba@sraoss.co.jp
We don't allow relations to exceed 2^32-1 blocks, because block
numbers are 32 bits and the last possible block number is reserved
to mean InvalidBlockNumber. There is a check for this in mdextend,
but that's really way too late, because the smgr API requires us to
create a buffer for the block-to-be-added, and we do not want to
have any buffer with blocknum InvalidBlockNumber. (Such a case
can trigger assertions in bufmgr.c, plus I think it might confuse
ReadBuffer's logic for data-past-EOF later on.) So put the check
into ReadBuffer.
Per report from Christoph Berg. It's been like this forever,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/YTn1iTkUYBZfcODk@msg.credativ.de
Previously, walreceiver always closed the currently-opened WAL segment
and created its archive notification file, after it finished writing
the current segment up and received any WAL data that should be
written into the next segment. If walreceiver exited just before
any WAL data in the next segment arrived at standby, it did not
create the archive notification file of the current segment
even though that's known completed. This behavior could cause
WAL archiving of the segment to be delayed until subsequent
restartpoints or checkpoints created its notification file.
To fix the issue, this commit changes walreceiver so that it creates
an archive notification file of a current WAL segment immediately
if that's known completed before receiving next WAL data.
Back-patch to all supported branches.
Reported-by: Kyotaro Horiguchi
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20200630.165503.1465894182551545886.horikyota.ntt@gmail.com
Coverity complained that one caller of getFormattedTypeName() failed
to free the returned string. Which is true, but rather than fixing
that one, let's get rid of this tedious and error-prone requirement.
Now that getFormattedTypeName() caches its result, strdup'ing that
result and expecting the caller to free it accomplishes little except
to waste cycles. We do create a leak in the case where getTypes didn't
make a TypeInfo for the type, but that basically shouldn't ever happen.
Back-patch, as commit 6c450a861 was. This isn't a particularly
interesting bug fix, but the API change seems like a hazard for
future back-patching activity if we don't back-patch it.
If we copy data-modifying CTEs from the original query to a replacement
query (from a DO INSTEAD rule), we must set hasModifyingCTE properly
in the replacement query. Failure to do this can cause various
unpleasantness, such as unsafe usage of parallel plans. The code also
neglected to propagate hasRecursive, though that's only cosmetic at
the moment.
A difficulty arises if the rule action is an INSERT...SELECT. We
attach the original query's RTEs and CTEs to the sub-SELECT Query, but
data-modifying CTEs are only allowed to appear in the topmost Query.
For the moment, throw an error in such cases. It would probably be
possible to avoid this error by attaching the CTEs to the top INSERT
Query instead; but that would require a bunch of new code to adjust
ctelevelsup references. Given the narrowness of the use-case, and
the need to back-patch this fix, it does not seem worth the trouble
for now. We can revisit this if we get field complaints.
Per report from Greg Nancarrow. Back-patch to all supported branches.
(The test case added here does not fail before v10, but there are
plenty of places checking top-level hasModifyingCTE in 9.6, so I have
no doubt that this code change is necessary there too.)
Greg Nancarrow and Tom Lane
Discussion: https://postgr.es/m/CAJcOf-f68DT=26YAMz_i0+Au3TcLO5oiHY5=fL6Sfuits6r+_w@mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-fAdj=nDKMsRhQzndm-O13NY4dL6xGcEvdX5Xvbbi0V7g@mail.gmail.com
Commit 01e658fa74 added hash support for row types. This also added
support for hashing anonymous record types, using the same approach
that the type cache uses for comparison support for record types: It
just reports that it works, but it might fail at run time if a
component type doesn't actually support the operation. We get away
with that for comparison because most types support that. But some
types don't support hashing, so the current state can result in
failures at run time where the planner chooses hashing over sorting,
whereas that previously worked if only sorting was an option.
We do, however, want the record hashing support for path tracking in
recursive unions, and the SEARCH and CYCLE clauses built on that. In
that case, hashing is the only plan option. So enable that, this
commit implements the following approach: The type cache does not
report that hashing is available for the record type. This undoes
that part of 01e658fa74. Instead, callers that require hashing no
matter what can override that result themselves. This patch only
touches the callers to make the aforementioned recursive query cases
work, namely the parse analysis of unions, as well as the hash_array()
function.
Reported-by: Sait Talha Nisanci <sait.nisanci@microsoft.com>
Bug: #17158
Discussion: https://www.postgresql.org/message-id/flat/17158-8a2ba823982537a4%40postgresql.org
Updates/Deletes on a relation were allowed even without replica identity
after we define the publication for all tables. This would later lead to
an error on subscribers. The reason was that for such publications we were
not invalidating the relcache and the publication information for
relations was not getting rebuilt. Similarly, we were not invalidating the
relcache after dropping of such publications which will prohibit
Updates/Deletes without replica identity even without any publication.
Author: Vignesh C and Hou Zhijie
Reviewed-by: Hou Zhijie, Kyotaro Horiguchi, Amit Kapila
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/CALDaNm0pF6zeWqCA8TCe2sDuwFAy8fCqba=nHampCKag-qLixg@mail.gmail.com
We make each AIX shared library export all globals found in .o files
that originate in the library. That doesn't include symbols acquired by
-lpgcommon_shlib. That is good on average, but it became a problem for
libpq when commit e6afa8918c moved five
official libpq API symbols into src/common. Fix this by implementing
the SHLIB_EXPORTS mechanism for AIX, so affected libraries export the
same symbols that they export on Linux. This reintroduces symbols
pg_encoding_to_char, pg_utf_mblen, pg_char_to_encoding,
pg_valid_server_encoding, and pg_valid_server_encoding_id. Back-patch
to v13, where the aforementioned commit first appeared. While a minor
release is usually the wrong time to add or remove symbol exports in
libpq or libecpg, we should expect users to want each documented symbol.
Tony Reix
Discussion: https://postgr.es/m/PR3PR02MB6396742E2FC3E77D37A920BC86C79@PR3PR02MB6396.eurprd02.prod.outlook.com
timetz_zone() delivered completely wrong answers if the zone was
specified by a dynamic TZ abbreviation, because it failed to account
for the difference between the POSIX conventions for field values in
struct pg_tm and the conventions used in PG-specific datetime code.
As a stopgap fix, just adjust the tm_year and tm_mon fields to match
PG conventions. This is fixed in a different way in HEAD (388e71af8)
but I don't want to back-patch the change of reference point.
Discussion: https://postgr.es/m/CAJ7c6TOMG8zSNEZtCn5SPe+cCk3Lfxb71ZaQwT2F4T7PJ_t=KA@mail.gmail.com
Attempting to make hashfloat4() look as much as possible like
hashfloat8(), I'd figured I could replace NaNs with get_float4_nan()
before widening to float8. However, results from protosciurus
and topminnow show that on some platforms that produces a different
bit-pattern from get_float8_nan(), breaking the intent of ce773f230.
Rearrange so that we use the result of get_float8_nan() for all NaN
cases. As before, back-patch.
Replace fixed-length command buffers with psprintf() calls. We didn't
have anything as convenient as psprintf() when this code was written,
but now that we do, there's little reason for the limitation to
stand. Removing it eliminates some corner cases where (for example)
starting the postmaster with a whole lot of options fails.
Most individual file names that pg_ctl deals with are still restricted
to MAXPGPATH, but we've seldom had complaints about that limitation
so long as it only applies to one filename.
Back-patch to all supported branches.
Phil Krylov
Discussion: https://postgr.es/m/567e199c6b97ee19deee600311515b86@krylov.eu
Previously this was allowed, but the collation effectively vanished
into the ether because of the way lookup_collation() works: you could
not use the collation, nor even drop it. Seems better to give an
error up front than to leave the user wondering why it doesn't work.
(Because this test is in DefineCollation not CreateCollation, it does
not prevent pg_import_system_collations from creating ICU collations,
regardless of the initially-chosen encoding.)
Per bug #17170 from Andrew Bille. Back-patch to v10 where ICU support
was added.
Discussion: https://postgr.es/m/17170-95845cf3f0a9c36d@postgresql.org
543f36b43d was too hasty in thinking that the volatility of date_bin()
had to match date_trunc(), since only the latter references
session_timezone.
Bump catversion
Per feedback from Aleksander Alekseev
Backpatch to v14, as the former commit was
Modern POSIX seems to require strtod() to accept "-NaN", but there's
nothing about NaN in SUSv2, and some of our oldest buildfarm members
don't like it. Let's try writing it as -'NaN' instead; that seems
to produce the same result, at least on Intel hardware.
Per buildfarm.
We had a complaint that the postmaster fails to start if the invoking
program closes stdin. That happens because count_usable_fds expects
to be able to dup(0), and if it can't, we conclude there are no free
FDs and go belly-up. So far as I can find, though, there is no other
place in the server that touches stdin, and it's not unreasonable to
expect that a daemon wouldn't use that file.
As a simple improvement, let's dup FD 2 (stderr) instead. Unlike stdin,
it *is* reasonable for us to expect that stderr be open; even if we are
configured not to touch it, common libraries such as libc might try to
write error messages there.
Per gripe from Mario Emmenlauer. Given the lack of previous complaints,
I'm not excited about pushing this into stable branches, but it seems
OK to squeeze it into v14.
Discussion: https://postgr.es/m/48bafc63-c30f-3962-2ded-f2e985d93e86@emmenlauer.de
The IEEE 754 standard allows a wide variety of bit patterns for NaNs,
of which at least two ("NaN" and "-NaN") are pretty easy to produce
from SQL on most machines. This is problematic because our btree
comparison functions deem all NaNs to be equal, but our float hash
functions know nothing about NaNs and will happily produce varying
hash codes for them. That causes unexpected results from queries
that hash a column containing different NaN values. It could also
produce unexpected lookup failures when using a hash index on a
float column, i.e. "WHERE x = 'NaN'" will not find all the rows
it should.
To fix, special-case NaN in the float hash functions, not too much
unlike the existing special case that forces zero and minus zero
to hash the same. I arranged for the most vanilla sort of NaN
(that coming from the C99 NAN constant) to still have the same
hash code as before, to reduce the risk to existing hash indexes.
I dithered about whether to back-patch this into stable branches,
but ultimately decided to do so. It's a clear improvement for
queries that hash internally. If there is anybody who has -NaN
in a hash index, they'd be well advised to re-index after applying
this patch ... but the misbehavior if they don't will not be much
worse than the misbehavior they had before.
Per bug #17172 from Ma Liangzhu.
Discussion: https://postgr.es/m/17172-7505bea9e04e230f@postgresql.org
Until now, when defining extended statistics, everything except a plain
column reference was treated as complex expression. So for example "a"
was a column reference, but "(a)" would be an expression. In most cases
this does not matter much, but there were a couple strange consequences.
For example
CREATE STATISTICS s ON a FROM t;
would fail, because extended stats require at least two columns. But
CREATE STATISTICS s ON (a) FROM t;
would succeed, because that requirement does not apply to expressions.
Moreover, that statistics object is useless - the optimizer will always
use the regular statistics collected for attribute "a".
So do a bit more work to identify those expressions referencing a single
column, and translate them to a simple column reference. Backpatch to
14, where support for extended statistics on expressions was introduced.
Reported-by: Justin Pryzby
Backpatch-through: 14
Discussion: https://postgr.es/m/20210816013255.GS10479%40telsasoft.com
When -C/--connect option is specified, pgbench establishes and closes
the connection for each transaction. In this case pgbench needs to
measure the times taken for all those connections and disconnections,
to include the average connection time in the benchmark result.
But previously pgbench could not measure those disconnection delays.
To fix the bug, this commit makes pgbench measure the disconnection
delays whenever the connection is closed at the end of transaction,
if -C/--connect option is specified.
Back-patch to v14. Per discussion, we concluded not to back-patch to v13
or before because changing that behavior in stable branches would
surprise users rather than providing benefits.
Author: Yugo Nagata
Reviewed-by: Fabien COELHO, Tatsuo Ishii, Asif Rehman, Fujii Masao
Discussion: https://postgr.es/m/20210614151155.a393bc7d8fed183e38c9f52a@sraoss.co.jp
The check to test whether the subscription workers were restarting after a
change in the subscription was failing. The reason was that the test was
assuming the walsender started before it reaches the 'streaming' state and
the walsender was exiting due to an error before that. Now, the walsender
was erroring out before reaching the 'streaming' state because it tries to
acquire the slot before the previous walsender has exited.
In passing, improve the die messages so that it is easier to investigate
the failures in the future if any.
Reported-by: Michael Paquier, as per buildfarm
Author: Ajin Cherian
Reviewed-by: Masahiko Sawada, Amit Kapila
Backpatch-through: 10, where this test was introduced
Discussion: https://postgr.es/m/YRnhFxa9bo73wfpV@paquier.xyz
It doesn't make any sense to report this information, since VACUUM
VERBOSE reports on heap relation truncation directly. This was an
oversight in commit 7ab96cf6, which made VACUUM VERBOSE output a little
more consistent with nearby autovacuum-specific log output. Adjust
comments that describe how this is supposed to work in passing.
Also bring truncation-related VACUUM VERBOSE output in line with the
convention established for VACUUM VERBOSE output by commit f4f4a649.
Author: Peter Geoghegan <pg@bowt.ie>
Backpatch: 14-, where VACUUM VERBOSE's output changed.
The code printing expressions for extended statistics doubled the
parens, producing results like ((a+1)), which is unnecessary and not
consistent with how we print expressions elsewhere.
Fixed by tweaking the code to produce just a single set of parens.
Reported by Mark Dilger, fix by me. Backpatch to 14, where support for
extended statistics on expressions was added.
Reported-by: Mark Dilger
Discussion: https://postgr.es/m/20210122040101.GF27167%40telsasoft.com
For no particularly good reason, getPolicies() queried pg_policy
separately for each table. We can collect all the policies in
a single query instead, and attach them to the correct TableInfo
objects using findTableByOid() lookups. On the regression
database, this reduces the number of queries substantially, and
provides a visible savings even when running against a local
server.
Per complaint from Hubert Depesz Lubaczewski. Since this is such
a simple fix and can have a visible performance benefit, back-patch
to all supported branches.
Discussion: https://postgr.es/m/20210826084430.GA26282@depesz.com
There's long been a "TODO: there might be some value in caching
the results" annotation on pg_dump's getFormattedTypeName function;
but we hadn't gotten around to checking what it was costing us to
repetitively look up type names. It turns out that when dumping the
current regression database, about 10% of the total number of queries
issued are duplicative format_type() queries. However, Hubert Depesz
Lubaczewski reported a not-unusual case where these account for over
half of the queries issued by pg_dump. Individually these queries
aren't expensive, but when network lag is a factor, they add up to a
problem. We can very easily add some caching to getFormattedTypeName
to solve it.
Since this is such a simple fix and can have a visible performance
benefit, back-patch to all supported branches.
Discussion: https://postgr.es/m/20210826084430.GA26282@depesz.com
Commit 5be8ce82e8 added a new role to the stats_ext regression suite,
but the role name did not start with regress_ causing failures when
running with ENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS. Fixed by
renaming the role to start with the expected regress_ prefix.
Backpatch-through: 10, same as the new regression test
Discussion: https://postgr.es/m/1F238937-7CC2-4703-A1B1-6DC225B8978A%40enterprisedb.com
When an ownership check on extended statistics object failed, the code
was calling aclcheck_error_type to report the failure, which is clearly
wrong, resulting in cache lookup errors. Fix by calling aclcheck_error.
This issue exists since the introduction of extended statistics, so
backpatch all the way back to PostgreSQL 10. It went unnoticed because
there were no tests triggering the error, so add one.
Reported-by: Mark Dilger
Backpatch-through: 10, where extended stats were introduced
Discussion: https://postgr.es/m/1F238937-7CC2-4703-A1B1-6DC225B8978A%40enterprisedb.com
When starting to use a query parsetree loaded from the catalogs,
we must begin by applying AcquireRewriteLocks(), to obtain the same
relation locks that the parser would have gotten if the query were
entered interactively, and to do some other cleanup such as dealing
with later-dropped columns. New-style SQL functions are just as
subject to this rule as other stored parsetrees; however, of the
places dealing with such functions, only init_sql_fcache had gotten
the memo. In particular, if we successfully inlined a new-style
set-returning SQL function that contained any relation references,
we'd either get an assertion failure or attempt to use those
relation(s) sans locks.
I also added AcquireRewriteLocks calls to fmgr_sql_validator and
print_function_sqlbody. Desultory experiments didn't demonstrate any
failures in those, but I suspect that I just didn't try hard enough.
Certainly we don't expect nearby code paths to operate without locks.
On the same logic of it-ought-to-have-the-same-effects-as-the-old-code,
call pg_rewrite_query() in fmgr_sql_validator, too. It's possible
that neither code path there needs to bother with rewriting, but
doing the analysis to prove that is beyond my goals for today.
Per bug #17161 from Alexander Lakhin.
Discussion: https://postgr.es/m/17161-048a1cdff8422800@postgresql.org
Most data-corruption reports mention the location of the problem, but
this one failed to. Add it.
Backpatch all the way back. In 12 and older, also assign the
ERRCODE_DATA_CORRUPTED error code as was done in commit fd6ec93bf8 for
13 and later.
Discussion: https://postgr.es/m/202108191637.oqyzrdtnheir@alvherre.pgsql
Per our message style guidelines, for human consumption we quote
qualified names as a whole rather than each part separately; but commits
bc085205c8 introduced a deviation for extended statistics and
a4d75c86bf copied it. I don't agree with this policy applying to
names shown by psql, but that's a poor reason to deviate from the
practice only in two obscure corners, so make said corners use the same
style as everywhere else.
Backpatch to 14. The first of these is older, but I'm not sure we want
to destabilize the psql output in the older branches for such a small
thing.
Discussion: https://postgr.es/m/20210828181618.GS26465@telsasoft.com
Commit 547f04e734 changed pgbench so that it used the measurement result
of connection delays in its benchmark report only when -C/--connect option
is specified. But previously those delays were unnecessarily measured
even when that option is not specified. Which was a waste of cycles.
This commit improves pgbench so that it avoids such unnecessary measurement.
Back-patch to v14 where commit 547f04e734 first appeared.
Author: Yugo Nagata
Reviewed-by: Fabien COELHO, Asif Rehman, Fujii Masao
Discussion: https://postgr.es/m/20210614151155.a393bc7d8fed183e38c9f52a@sraoss.co.jp
In the long-going saga for analyze on partitioned tables, one thing I
missed while reverting 0827e8af70 is the maintenance of analyze count
and last analyze time for partitioned tables. This is a mostly trivial
change that enables users assess the need for invoking manual ANALYZE on
partitioned tables.
This patch, posted by Justin and modified a bit by me (Álvaro), can be
mostly traced back to Hosoya-san, though any problems introduced with
the scissors are mine.
Backpatch to 14, in line with 6f8127b739.
Co-authored-by: Yuzuko Hosoya <yuzukohosoya@gmail.com>
Co-authored-by: Justin Pryzby <pryzby@telsasoft.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210816222810.GE10479@telsasoft.com
Déjà vu of commit fc40ba1296, for another backslash command.
Strictly speaking this isn't a bug, but since all references to catalog
objects are schema-qualified, we might as well be consistent. The
omission first appeared in commit ad600bba04 and replicated in
a4d75c86bf15; backpatch to 14.
Author: Justin Pryzby <pryzbyj@telsasoft.com>
Discussion: https://postgr.es/m/20210827193151.GN26465@telsasoft.com
Strictly speaking this isn't a bug, but since all references to catalog
objects are schema-qualified, we might as well be consistent. The
omission first appeared in commit 1c5d9270e3, so backpatch to 12.
Author: Justin Pryzby <pryzbyj@telsasoft.com>
Discussion: https://postgr.es/m/20210827193151.GN26465@telsasoft.com
If the system crashed between CREATE TABLESPACE and the next checkpoint,
the result could be some files in the tablespace unexpectedly containing
no rows. Affected files would be those for which the system did not
write WAL; see the wal_skip_threshold documentation. Before v13, a
different set of conditions governed the writing of WAL; see v12's
<sect2 id="populate-pitr">. (The v12 conditions were broader in some
ways and narrower in others.) Users may want to audit non-default
tablespaces for unexpected short files. The bug could have truncated an
index without affecting the associated table, and reindexing the index
would fix that particular problem.
This fixes the bug by making create_tablespace_directories() more like
TablespaceCreateDbspace(). create_tablespace_directories() was
recursively removing tablespace contents, reasoning that WAL redo would
recreate everything removed that way. That assumption holds for other
wal_level values. Under wal_level=minimal, the old approach could
delete files for which no other copy existed. Back-patch to 9.6 (all
supported versions).
Reviewed by Robert Haas and Prabhat Sahu. Reported by Robert Haas.
Discussion: https://postgr.es/m/CA+TgmoaLO9ncuwvr2nN-J4VEP5XyAcy=zKiHxQzBbFRxxGxm0w@mail.gmail.com
Somehow, spgist overlooked the need to call pgstat_count_index_scan().
Hence, pg_stat_all_indexes.idx_scan and equivalent columns never
became nonzero for an SP-GiST index, although the related per-tuple
counters worked fine.
This fix works a bit differently from other index AMs, in that the
counter increment occurs in spgrescan not spggettuple/spggetbitmap.
It looks like this won't make the user-visible semantics noticeably
different, so I won't go to the trouble of introducing an is-this-
the-first-call flag just to make the counter bumps happen in the
same places.
Per bug #17163 from Christian Quest. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/17163-b8c5cc88322a5e92@postgresql.org
When prefetching pages for ANALYZE, we should be using
maintenance_io_concurrenty (by calling
get_tablespace_maintenance_io_concurrency(), not
get_tablespace_io_concurrency()).
ANALYZE prefetching was introduced in c6fc50c, so back-patch to 14.
Backpatch-through: 14
Reported-By: Egor Rogov
Discussion: https://postgr.es/m/9beada99-34ce-8c95-fadb-451768d08c64%40postgrespro.ru
Adjust track_io_timing related logging code added by commit 94d13d474d.
Make it consistent with other nearby autovacuum and autoanalyze logging
code by removing logic that suppressed zero millisecond outputs.
log_autovacuum_min_duration log output now reliably shows "read:" and
"write:" millisecond-based values in its report (when track_io_timing is
enabled).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Stephen Frost <sfrost@snowman.net>
Discussion: https://postgr.es/m/CAH2-WznW0FNxSVQMSRazAMYNfZ6DR_gr5WE78hc6E1CBkkJpzw@mail.gmail.com
Backpatch: 14-, where the track_io_timing logging was introduced.
This order seems more natural. It starts with details that are
particular to heap and index data structures, and ends with system-level
costs incurred during the autovacuum worker's VACUUM/ANALYZE operation.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzkzxK6ahA9xxsOftRtBX_R0swuHZsvo4QUbak1Bz7hb7Q@mail.gmail.com
Backpatch: 14-, which enhanced the log output in various ways.
Second thoughts about commit 824bf7190: we apply makesearch() to
an NFA after having determined whether it is a MATCHALL pattern.
Prepending ".*" doesn't make it non-MATCHALL, but it does change the
maximum possible match length, and makesearch() failed to update that.
This has no ill effects given the stylized usage of search NFAs, but
it seems like it's better to keep the data structure consistent. In
particular, fixing this allows more honest handling of the MATCHALL
check in matchuntil(): we can now assert that maxmatchall is infinity,
instead of lamely assuming that it should act that way.
In passing, improve the code in dump[c]nfa so that infinite maxmatchall
is printed as "inf" not a magic number.
Pengchengliu reported an assertion failure in a parallel woker while
performing a parallel scan using an overflowed snapshot. The proximate
cause is that TransactionXmin was set to an incorrect value. The
underlying cause is incorrect snapshot handling in parallel.c.
In particular, InitializeParallelDSM() was unconditionally calling
GetTransactionSnapshot(), because I (rhaas) mistakenly thought that
was always retrieving an existing snapshot whereas, at isolation
levels less than REPEATABLE READ, it's actually taking a new one. So
instead do this only at higher isolation levels where there actually
is a single snapshot for the whole transaction.
By itself, this is not a sufficient fix, because we still need to
guarantee that TransactionXmin gets set properly in the workers. The
easiest way to do that seems to be to install the leader's active
snapshot as the transaction snapshot if the leader did not serialize a
transaction snapshot. This doesn't affect the results of future
GetTrasnactionSnapshot() calls since those have to take a new snapshot
anyway; what we care about is the side effect of setting TransactionXmin.
Report by Pengchengliu. Patch by Greg Nancarrow, except for some comment
text which I supplied.
Discussion: https://postgr.es/m/002f01d748ac$eaa781a0$bff684e0$@tju.edu.cn
Commit 325f2ec555 introduced pg_class.relwrite to skip operations on
tables created as part of a heap rewrite during DDL. It links such
transient heaps to the original relation OID via this new field in
pg_class but forgot to do anything about toast tables. So, logical
decoding was not able to skip operations on internally created toast
tables. This leads to an error when we tried to decode the WAL for the
next operation for which it appeared that there is a toast data where
actually it didn't have any toast data.
To fix this, we set pg_class.relwrite for internally created toast tables
as well which allowed skipping operations on them during logical decoding.
Author: Bertrand Drouvot
Reviewed-by: David Zhang, Amit Kapila
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/b5146fb1-ad9e-7d6e-f980-98ed68744a7c@amazon.com
This commit improves the ecpg's error message that commit f576de1db1 updated,
so that it gets rid of trailing period and uppercases the command name
in the error message.
Back-patch to v14 where the error message exists.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
There are two identical error messages about valid value of modulus for
hash partition, in PostgreSQL source code. Commit 0e1275fb07 improved
only one of them so that ambiguous word "positive" was avoided there,
and forgot to improve the other. This commit improves the other.
Which would reduce translator burden.
Back-pach to v11 where the error message exists.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
The distance in phrase operator must be an integer value between zero
and MAXENTRYPOS inclusive. But previously the error message about
its valid value included the information about its upper limit
but not lower limit (i.e., zero). This commit improves the error message
so that it also includes the information about its lower limit.
Back-patch to v9.6 where full-text phrase search was supported.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
Regexps like "(.){0}...\1" drew an "invalid backreference number".
That's not unreasonable on its face, since the capture group will
never be matched if it's iterated zero times. However, other engines
such as Perl's don't complain about this, nor do we throw an error for
related cases such as "(.)|\1", even though that backref can never
succeed either. Also, if the zero-iterations case happens at runtime
rather than compile time --- say, "(x)*...\1" when there's no "x" to
be found --- that's not an error, we just deem the backref to not
match. Making this even less defensible, no error was thrown for
nested cases such as "((.)){0}...\2"; and to add insult to injury,
those cases could result in assertion failures instead. (It seems
that nothing especially bad happened in non-assert builds, though.)
Let's just fix it so that no error is thrown and instead the backref
is deemed to never match, so that compile-time detection of no
iterations behaves the same as run-time detection.
Per report from Mark Dilger. This appears to be an aboriginal error
in Spencer's library, so back-patch to all supported versions.
Pre-v14, it turns out to also be necessary to back-patch one aspect of
commits cb76fbd7e/00116dee5, namely to create capture-node subREs with
the begin/end states of their subexpressions, not the current lp/rp
of the outer parseqatom invocation. Otherwise delsub complains that
we're trying to disconnect a state from itself. This is a bit scary
but code examination shows that it's safe: in the pre-v14 code, if we
want to wrap iteration around the subexpression, the first thing we do
is overwrite the atom's begin/end fields with new states. So the
bogus values didn't survive long enough to be used for anything, except
if no iteration is required, in which case it doesn't matter.
Discussion: https://postgr.es/m/A099E4A8-4377-4C64-A98C-3DEDDC075502@enterprisedb.com
The current refresh behavior tries to just refresh added/dropped
publications but that leads to removing wrong tables from subscription. We
can't refresh just the dropped publication because it is quite possible
that some of the tables are removed from publication by that time and now
those will remain as part of the subscription. Also, there is a chance
that the tables that were part of the publication being dropped are also
part of another publication, so we can't remove those.
So, we decided that by default, add/drop commands will also act like
REFRESH PUBLICATION which means they will refresh all the publications. We
can keep the old behavior for "add publication" but it is better to be
consistent with "drop publication".
Author: Hou Zhijie
Reviewed-by: Masahiko Sawada, Amit Kapila
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/OS0PR01MB5716935D4C2CC85A6143073F94EF9@OS0PR01MB5716.jpnprd01.prod.outlook.com
The recursion in cdissect() was careless about clearing match data
for capturing parentheses after rejecting a partial match. This
could allow a later back-reference to succeed when by rights it
should fail for lack of a defined referent.
To fix, think a little more rigorously about what the contract
between different levels of cdissect's recursion needs to be.
With the right spec, we can fix this using fewer rather than more
resets of the match data; the key decision being that a failed
sub-match is now explicitly responsible for clearing any matches
it may have set.
There are enough other cross-checks and optimizations in the code
that it's not especially easy to exhibit this problem; usually, the
match will fail as-expected. Plus, regexps that are even potentially
vulnerable are most likely user errors, since there's just not much
point in writing a back-ref that doesn't always have a referent.
These facts perhaps explain why the issue hasn't been detected,
even though it's almost certainly a couple of decades old.
Discussion: https://postgr.es/m/151435.1629733387@sss.pgh.pa.us
WAL records may span multiple segments, but XLogWrite() does not
wait for the entire record to be written out to disk before
creating archive status files. Instead, as soon as the last WAL page of
the segment is written, the archive status file is created, and the
archiver may process it. If PostgreSQL crashes before it is able to
write and flush the rest of the record (in the next WAL segment), the
wrong version of the first segment file lingers in the archive, which
causes operations such as point-in-time restores to fail.
To fix this, keep track of records that span across segments and ensure
that segments are only marked ready-for-archival once such records have
been completely written to disk.
This has always been wrong, so backpatch all the way back.
Author: Nathan Bossart <bossartn@amazon.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Ryo Matsumura <matsumura.ryo@fujitsu.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CBDDFA01-6E40-46BB-9F98-9340F4379505@amazon.com
In a backup manifest, WAL-Ranges stores the range of WAL that is
required for the backup to be valid. pg_verifybackup would then
internally use pg_waldump for the checks based on this data.
When the timeline where the backup started was more than 1 with a
history file looked at for the manifest data generation, the calculation
of the WAL range for the first timeline to check was incorrect. The
previous logic used as start LSN the start position of the first
timeline, but it needs to use the start LSN of the backup. This would
cause failures with pg_verifybackup, or any tools making use of the
backup manifests.
This commit adds a test based on a logic using a self-promoted node,
making it rather cheap.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20210818.143031.1867083699202617521.horikyota.ntt@gmail.com
Backpatch-through: 13
Improve two places in plpgsql, and one in spi.c, where an error
message would confusingly tell you that you couldn't use a SELECT
query, when what you had written *was* a SELECT query. The actual
problem is that you can't use SELECT ... INTO in these contexts,
but the messages failed to make that apparent. Special-case
SELECT INTO to make these errors more helpful.
Also, fix the same spots in plpgsql, as well as several messages
in exec_eval_expr(), to not quote the entire complained-of query or
expression in the primary error message. That behavior very easily
led to violating our message style guideline about keeping the primary
error message short and single-line. Also, since the important part
of the message was after the inserted text, it could make the real
problem very hard to see. We can report the query or expression as
the first line of errcontext instead.
Per complaint from Roger Mason. Back-patch to v14, since (a) some
of these messages are new in v14 and (b) v14's translatable strings
are still somewhat in flux. The problem's older than that of
course, but I'm hesitant to change the behavior further back.
Discussion: https://postgr.es/m/1914708.1629474624@sss.pgh.pa.us
After detecting a sub-match "dissect" failure (i.e., a backref match
failure) in the i'th sub-match of an iteration node, we should proceed
by adjusting the attempted length of the i'th submatch. As coded,
though, these functions changed the attempted length of the *last*
sub-match, and only after exhausting all possibilities for that would
they back up to adjust the next-to-last sub-match, and then the
second-from-last, etc; all of which is wasted effort, since only
changing the start or length of the i'th sub-match can possibly make
it succeed. This oversight creates the possibility for exponentially
bad performance. Fortunately the problem is masked in most cases by
optimizations or constraints applied elsewhere; which explains why
we'd not noticed it before. But it is possible to reach the problem
with fairly simple, if contrived, regexps.
Oversight in my commit 173e29aa5. That's pretty ancient now,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/1808998.1629412269@sss.pgh.pa.us
Using --quiet in combination with --no-strict-names didn't work as
documented, a warning message was still emitted. Since the --quiet
flag was working in an unconventional way to other utilities, fix
by removing the functionality instead.
Backpatch through 14 where pg_amcheck was introduced.
Bug: 17148
Reported-by: Chen Jiaoqian <chenjq.jy@fujitsu.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/17148-b5087318e2b04fc6@postgresql.org
Backpatch-through: 14
transformLockingClause neglected to exclude the pseudo-RTEs for
OLD/NEW when processing a rule's query. This led to odd errors
or even crashes later on. This bug is very ancient, but it's
not terribly surprising that nobody noticed, since the use-case
for SELECT FOR UPDATE in a non-view rule is somewhere between
thin and non-existent. Still, crashing is not OK.
Per bug #17151 from Zhiyong Wu. Thanks to Masahiko Sawada
for analysis of the problem.
Discussion: https://postgr.es/m/17151-c03a3e6e4ec9aadb@postgresql.org
Previously log messages late during shutdown could end up using either another
backend's PgBackendStatus (multi user) or segfault (single user) because
pgstat_get_my_query_id()'s check for !MyBEEntry didn't filter out use after
pgstat_beshutdown_hook().
This became a bug in 4f0b0966c8, but was a bit fishy before. But given
there's no known problematic cases before 14, it doesn't seem worth
backpatching further.
Also fixes a wrong filename in a comment, introduced in e1025044.
Reported-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/Julien Rouhaud <rjuju123@gmail.com>
Backpatch: 14-
This is a combined revert of the following commits:
- c3826f8, a refactoring piece that moved the hex decoding code to
src/common/. This code was cleaned up by aef8948, as it originally
included no overflow checks in the same way as the base64 routines in
src/common/ used by SCRAM, making it unsafe for its purpose.
- aef8948, a more advanced refactoring of the hex encoding/decoding code
to src/common/ that added sanity checks on the result buffer for hex
decoding and encoding. As reported by Hans Buschmann, those overflow
checks are expensive, and it is possible to see a performance drop in
the decoding/encoding of bytea or LOs the longer they are. Simple SQLs
working on large bytea values show a clear difference in perf profile.
- ccf4e27, a cleanup made possible by aef8948.
The reverts of all those commits bring back the performance of hex
decoding and encoding back to what it was in ~13. Fow now and
post-beta3, this is the simplest option.
Reported-by: Hans Buschmann
Discussion: https://postgr.es/m/1629039545467.80333@nidsa.net
Backpatch-through: 14
Recursion into the FILTER clause was mis-implemented, such that a
relevant Var or Aggref at the very top of the FILTER clause would
be ignored. (Of course, that'd have to be a plain boolean Var or
boolean-returning aggregate.) The consequence would be
mis-identification of the correct semantic level of the aggregate,
which could lead to not-per-spec query behavior. If the FILTER
expression is an aggregate, this could also lead to failure to issue
an expected "aggregate function calls cannot be nested" error, which
would likely result in a core dump later on, since the planner and
executor aren't expecting such cases to appear.
The root cause is that commit b560ec1b0 blindly copied some code
that assumed it's recursing into a List, and thus didn't examine the
top-level node. To forestall questions about why this call doesn't
look like the others, as well as possible future copy-and-paste
mistakes, let's change all three check_agg_arguments_walker calls in
check_agg_arguments, even though only the one for the filter clause
is really broken.
Per bug #17152 from Zhiyong Wu. This has been wrong since we
implemented FILTER, so back-patch to all supported versions.
(Testing suggests that pre-v11 branches manage to avoid crashing
in the bad-Aggref case, thanks to "redundant" checks in ExecInitAgg.
But I'm not sure how thorough that protection is, and anyway the
wrong-behavior issue remains, so fix 9.6 and 10 too.)
Discussion: https://postgr.es/m/17152-c7f906cc1a88e61b@postgresql.org
The skip options set for all-visible and all-frozen were incorrect
as they used space rather than hyphen, causing a syntax error when
invoked. Also, the option for not skipping any pages at all, none,
was documented but not implemented.
Backpatch through 14 where pg_amcheck was introduced.
Bug: #17149
Reported-by: Chen Jiaoqian <chenjq.jy@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/17149-5918ea748da36b15@postgresql.org
Backpatch-through: 14
If recordDependencyOnCurrentExtension is invoked on a pre-existing,
free-standing object during an extension update script, that object
will become owned by the extension. In our current code this is
possible in three cases:
* Replacing a "shell" type or operator.
* CREATE OR REPLACE overwriting an existing object.
* ALTER TYPE SET, ALTER DOMAIN SET, and ALTER OPERATOR SET.
The first of these cases is intentional behavior, as noted by the
existing comments for GenerateTypeDependencies. It seems like
appropriate behavior for CREATE OR REPLACE too; at least, the obvious
alternatives are not better. However, the fact that it happens during
ALTER is an artifact of trying to share code (GenerateTypeDependencies
and makeOperatorDependencies) between the CREATE and ALTER cases.
Since an extension script would be unlikely to ALTER an object that
didn't already belong to the extension, this behavior is not very
troubling for the direct target object ... but ALTER TYPE SET will
recurse to dependent domains, and it is very uncool for those to
become owned by the extension if they were not already.
Let's fix this by redefining the ALTER cases to never change extension
membership, full stop. We could minimize the behavioral change by
only changing the behavior when ALTER TYPE SET is recursing to a
domain, but that would complicate the code and it does not seem like
a better definition.
Per bug #17144 from Alex Kozhemyakin. Back-patch to v13 where ALTER
TYPE SET was added. (The other cases are older, but since they only
affect the directly-named object, there's not enough of a problem to
justify changing the behavior further back.)
Discussion: https://postgr.es/m/17144-e67d7a8f049de9af@postgresql.org
In OpenSSL there are two types of BIO's (I/O abstractions):
source/sink and filters. A source/sink BIO is a source and/or
sink of data, ie one acting on a socket or a file. A filter
BIO takes a stream of input from another BIO and transforms it.
In order for BIO_find_type() to be able to traverse the chain
of BIO's and correctly find all BIO's of a certain type they
shall have the type bit set accordingly, source/sink BIO's
(what PostgreSQL implements) use BIO_TYPE_SOURCE_SINK and
filter BIO's use BIO_TYPE_FILTER. In addition to these, file
descriptor based BIO's should have the descriptor bit set,
BIO_TYPE_DESCRIPTOR.
The PostgreSQL implementation didn't set the type bits, which
went unnoticed for a long time as it's only really relevant
for code auditing the OpenSSL installation, or doing similar
tasks. It is required by the API though, so this fixes it.
Backpatch through 9.6 as this has been wrong for a long time.
Author: Itamar Gafni
Discussion: https://postgr.es/m/SN6PR06MB39665EC10C34BB20956AE4578AF39@SN6PR06MB3966.namprd06.prod.outlook.com
Backpatch-through: 9.6
This reverts the following commits:
1b5617eb84 Describe (auto-)analyze behavior for partitioned tables
0e69f705cc Set pg_class.reltuples for partitioned tables
41badeaba8 Document ANALYZE storage parameters for partitioned tables
0827e8af70 autovacuum: handle analyze for partitioned tables
There are efficiency issues in this code when handling databases with
large numbers of partitions, and it doesn't look like there isn't any
trivial way to handle those. There are some other issues as well. It's
now too late in the cycle for nontrivial fixes, so we'll have to let
Postgres 14 users continue to manually deal with ANALYZE their
partitioned tables, and hopefully we can fix the issues for Postgres 15.
I kept [most of] be280cdad2 ("Don't reset relhasindex for partitioned
tables on ANALYZE") because while we added it due to 0827e8af70, it is
a good bugfix in its own right, since it affects manual analyze as well
as autovacuum-induced analyze, and there's no reason to revert it.
I retained the addition of relkind 'p' to tables included by
pg_stat_user_tables, because reverting that would require a catversion
bump.
Also, in pg14 only, I keep a struct member that was added to
PgStat_TabStatEntry to avoid breaking compatibility with existing stat
files.
Backpatch to 14.
Discussion: https://postgr.es/m/20210722205458.f2bug3z6qzxzpx2s@alap3.anarazel.de
This commit ensures that the wait interval in the replay delay loop
waiting for an amount of time defined by recovery_min_apply_delay is
correctly handled on reload, recalculating the delay if this GUC value
is updated, based on the timestamp of the commit record being replayed.
The previous behavior would be problematic for example with replay
still waiting even if the delay got reduced or just cancelled. If the
apply delay was increased to a larger value, the wait would have just
respected the old value set, finishing earlier.
Author: Soumyadeep Chakraborty, Ashwin Agrawal
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/CAE-ML+93zfr-HLN8OuxF0BjpWJ17O5dv1eMvSE5jsj9jpnAXZA@mail.gmail.com
Backpatch-through: 9.6
Like the ARM case, just use gcc's __sync_lock_test_and_set();
that will compile into AMOSWAP.W.AQ which does what we need.
At some point it might be worth doing some work on atomic ops
for RISC-V, but this should be enough for a creditable port.
Back-patch to all supported branches, just in case somebody
wants to try them on RISC-V.
Marek Szuba
Discussion: https://postgr.es/m/dea97b6d-f55f-1f6d-9109-504aa7dfa421@gentoo.org
The check for sslsni only checked for existence of the parameter
but not for the actual value of the param. This meant that the
SNI extension was always turned on. Fix by inspecting the value
of sslsni and only activate the SNI extension iff sslsni has been
enabled. Also update the docs to be more in line with how other
boolean params are documented.
Backpatch to 14 where sslsni was first implemented.
Reviewed-by: Tom Lane
Backpatch-through: 14, where sslni was added
This fixes a bug in simplehash.h which caused an incorrect size mask to be
used when the hash table grew to SH_MAX_SIZE (2^32). The code was
incorrectly setting the size mask to 0 when the hash tables reached the
maximum possible number of buckets. This would result always trying to
use the 0th bucket causing an infinite loop of trying to grow the hash
table due to there being too many collisions.
Seemingly it's not that common for simplehash tables to ever grow this big
as this bug dates back to v10 and nobody seems to have noticed it before.
However, probably the most likely place that people would notice it would
be doing a large in-memory Hash Aggregate with something close to at least
2^31 groups.
After this fix, the code now works correctly with up to within 98% of 2^32
groups and will fail with the following error when trying to insert any
more items into the hash table:
ERROR: hash table size exceeded
However, the work_mem (or hash_mem_multiplier in newer versions) settings
will generally cause Hash Aggregates to spill to disk long before reaching
that many groups. The minimal test case I did took a work_mem setting of
over 192GB to hit the bug.
simplehash hash tables are used in a few other places such as Bitmap Index
Scans, however, again the size that the hash table can become there is
also limited to work_mem and it would take a relation of around 16TB
(2^31) pages and a very large work_mem setting to hit this. With smaller
work_mem values the table would become lossy and never grow large enough
to hit the problem.
Author: Yura Sokolov
Reviewed-by: David Rowley, Ranier Vilela
Discussion: https://postgr.es/m/b1f7f32737c3438136f64b26f4852b96@postgrespro.ru
Backpatch-through: 10, where simplehash.h was added
It's hard to disable ASLR on current macOS releases, for testing with
-DEXEC_BACKEND. You could already set the environment variable
PG_SHMEM_ADDR to something not likely to collide with mappings created
earlier in process startup. Let's also provide a default value that
works on current releases and architectures, for developer convenience.
As noted in the pre-existing comment, this is a horrible hack, but
-DEXEC_BACKEND is only used by Unix-based PostgreSQL developers for
testing some otherwise Windows-only code paths, so it seems excusable.
Back-patch to all supported branches.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
The FDW batching code was using the same tuple descriptor both for all
slots (regular and plan slots), but that's incorrect - the subplan may
use a different descriptor. Currently this is benign, because batching
is used only for INSERTs, and in that case the descriptors always match.
But that would change if we allow batching UPDATEs.
Fix by copying the appropriate tuple descriptor. Backpatch to 14, where
the FDW batching was implemented.
Author: Amit Langote
Backpatch-through: 14, where FDW batching was added
Discussion: https://postgr.es/m/CA%2BHiwqEWd5B0-e-RvixGGUrNvGkjH2s4m95%3DJcwUnyV%3Df0rAKQ%40mail.gmail.com
It's not sensible to re-evaluate a direct-modify Foreign Update or Delete
during EvalPlanQual. However, ExecInitForeignScan() can still get called
if a table mixes local and foreign partitions. EvalPlanQualStart() left
the es_result_relations array uninitialized in the child EPQ EState, but
ExecInitForeignScan() still expected to find it. That caused a segfault.
Fix by skipping the es_result_relations lookup during EvalPlanQual
processing. To make things a bit more robust, also skip the
BeginDirectModify calls, and add a runtime check that ExecForeignScan()
is not called on direct-modify foreign scans during EvalPlanQual
processing.
This is new in v14, commit 1375422c78. Before that, EvalPlanQualStart()
copied the whole ResultRelInfo array to the EPQ EState. Backpatch to v14.
Report and diagnosis by Andrey Lepikhov.
Discussion: https://www.postgresql.org/message-id/cb2b808d-cbaa-4772-76ee-c8809bafcf3d%40postgrespro.ru
This saves a few lines of code. Also add a comment to mention why we use
ExplainPropertyInteger instead of ExplainPropertyUInteger given that
queryid is a uint64 type.
Author: David Rowley
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CAApHDvqhSLYpSU_EqUdN39w9Uvb8ogmHV7_3YhJ0S3aScGBjsg@mail.gmail.com
Backpatch-through: 14, where this code was originally added
I had committer's remorse almost immediately after pushing cb76fbd7e,
upon finding that removing capturing subexpressions' subREs from the
data structure broke my proposed patch for REG_NOSUB optimization.
Revert that data structure change. Instead, address the concern
about not changing capturing subREs' endpoints by not changing the
endpoints. We don't need to, because the point of that bit was just
to ensure that the atom has endpoints distinct from the outer state
pair that we're stringing the branch between. We already made
suitable states in the parenthesized-subexpression case, so the
additional ones were just useless overhead. This seems more
understandable than Spencer's original coding, and it ought to be
a shade faster too by saving a few state creations and arc changes.
(I actually see a couple percent improvement on Jacobson's web
corpus, though that's barely above the noise floor so I wouldn't
put much stock in that result.)
Also, fix the logic added by ea1268f63 to ensure that the subRE
recorded in v->subs[subno] is exactly the one with capno == subno.
Spencer's original coding recorded the child subRE of the capture
node, which is okay so far as having the right endpoint states is
concerned, but as of cb76fbd7e the capturing subRE itself always
has those endpoints too. I think the inconsistency is confusing
for the REG_NOSUB optimization.
As before, backpatch to v14.
Discussion: https://postgr.es/m/0203588E-E609-43AF-9F4F-902854231EE7@enterprisedb.com
Up to now, we remembered the definition of a capturing parenthesis
subexpression by storing a pointer to the associated subRE node.
That was okay before, because that subRE didn't get modified anymore
while parsing the rest of the regexp. However, in the wake of
commit ea1268f63, that's no longer true: the outer invocation of
parseqatom() feels free to scribble on that subRE. This seems to
work anyway, because the states we jam into the child atom in the
"prepare a general-purpose state skeleton" stanza aren't really
semantically different from the original endpoints of the child atom.
But that would be mighty easy to break, and it's definitely not how
things worked before.
Between this and the issue fixed in the prior commit, it seems best
to get rid of this dependence on subRE nodes entirely. We don't need
the whole child subRE for future backrefs, only its starting and ending
NFA states; so let's just store pointers to those.
Also, in the corner case where we make an extra subRE to handle
immediately-nested capturing parentheses, it seems like it'd be smart
to have the extra subRE have the same begin/end states as the original
child subRE does (s/s2 not lp/rp). I think that linking it from lp to
rp might actually be semantically wrong, though since Spencer's original
code did it that way, I'm not totally certain. Using s/s2 is certainly
not wrong, in any case.
Per report from Mark Dilger. Back-patch to v14 where the problematic
patches came in.
Discussion: https://postgr.es/m/0203588E-E609-43AF-9F4F-902854231EE7@enterprisedb.com
Commit cebc1d34e taught parseqatom() to optimize cases where a branch
contains only one, "messy", atom by getting rid of excess subRE nodes.
The way we really should do that is to keep the subRE built for the
"messy" child atom; but to avoid changing parseqatom's nominal API,
I made it delete that node after copying its fields to the outer subRE
made by parsebranch(). It seems that that actually worked at the time;
but it became dangerous after ea1268f63, because that later commit
allowed the lower invocation of parse() to return a subRE that was also
pointed to by some v->subs[] entry. This meant we could wind up with a
dangling pointer in v->subs[], allowing a later backref to misbehave,
but only if that subRE struct had been reused in between. So the damage
seems confined to cases like '((...))...(...\2'.
To fix, do what I should have done before and modify parseqatom's API
to make it possible for it to remove the caller's subRE instead of the
callee's. That's safer because we know that subRE isn't complete yet,
so noplace else will have a pointer to it.
Per report from Mark Dilger. Back-patch to v14 where the problematic
patches came in.
Discussion: https://postgr.es/m/0203588E-E609-43AF-9F4F-902854231EE7@enterprisedb.com
Rather than trying to pick table aliases that won't conflict with
any possible user-defined matview column name, adjust the queries'
syntax so that the aliases are only used in places where they can't be
mistaken for column names. Mostly this consists of writing "alias.*"
not just "alias", which adds clarity for humans as well as machines.
We do have the issue that "SELECT alias.*" acts differently from
"SELECT alias", but we can use the same hack ruleutils.c uses for
whole-row variables in SELECT lists: write "alias.*::compositetype".
We might as well revert to the original aliases after doing this;
they're a bit easier to read.
Like 75d66d10e, back-patch to all supported branches.
Discussion: https://postgr.es/m/2488325.1628261320@sss.pgh.pa.us
Casting a value that's already of a type with a specific typmod
to an unspecified typmod doesn't do anything so far as run-time
behavior is concerned. However, it really ought to change the
exposed type of the expression to match. Up to now,
coerce_type_typmod hasn't bothered with that, which creates gotchas
in contexts such as recursive unions. If for example one side of
the union is numeric(18,3), but it needs to be plain numeric to
match the other side, there's no direct way to express that.
This is easy enough to fix, by inserting a RelabelType to update the
exposed type of the expression. However, it's a bit nervous-making
to change this behavior, because it's stood for a really long time.
(I strongly suspect that it's like this in part because the logic
pre-dates the introduction of RelabelType in 7.0. The commit log
message for 57b30e8e2 is interesting reading here.) As a compromise,
we'll sneak the change into 14beta3, and consider back-patching to
stable branches if no complaints emerge in the next three months.
Discussion: https://postgr.es/m/CABNQVagu3bZGqiTjb31a8D5Od3fUMs7Oh3gmZMQZVHZ=uWWWfQ@mail.gmail.com
Formerly, the numeric code tested whether an integer value of a larger
type would fit in a smaller type by casting it to the smaller type and
then testing if the reverse conversion produced the original value.
That's perfectly fine, except that it caused a test failure on
buildfarm animal castoroides, most likely due to a compiler bug.
Instead, do these tests by comparing against PG_INT16/32_MIN/MAX. That
matches existing code in other places, such as int84(), which is more
widely tested, and so is less likely to go wrong.
While at it, add regression tests covering the numeric-to-int8/4/2
conversions, and adjust the recently added tests to the style of
434ddfb79a (on the v11 branch) to make failures easier to diagnose.
Per buildfarm via Tom Lane, reviewed by Tom Lane.
Discussion: https://postgr.es/m/2394813.1628179479%40sss.pgh.pa.us
This fixes a long-standing bug when using to_char() to format a
numeric value in scientific notation -- if the value's exponent is
less than -NUMERIC_MAX_DISPLAY_SCALE-1 (-1001), it produced a
division-by-zero error.
The reason for this error was that get_str_from_var_sci() divides its
input by 10^exp, which it produced using power_var_int(). However, the
underflow test in power_var_int() causes it to return zero if the
result scale is too small. That's not a problem for power_var_int()'s
only other caller, power_var(), since that limits the rscale to 1000,
but in get_str_from_var_sci() the exponent can be much smaller,
requiring a much larger rscale. Fix by introducing a new function to
compute 10^exp directly, with no rscale limit. This also allows 10^exp
to be computed more efficiently, without any numeric multiplication,
division or rounding.
Discussion: https://postgr.es/m/CAEZATCWhojfH4whaqgUKBe8D5jNHB8ytzemL-PnRx+KCTyMXmg@mail.gmail.com
Up to now we did a PQconsumeInput() for each pipelined query, asking the OS
for more input - which it often won't have, as all results might already have
been sent. That turns out to have a noticeable performance impact.
Alvaro Herrera reviewed the idea to add the PQisBusy() check, but not this
concrete patch.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210720180039.23rivhdft3l4mayn@alap3.anarazel.de
Backpatch: 14, where libpq/pgbench pipelining was introduced.
Oversight in commit 3499df0d, which generalized the reloption as a way
of giving users a way to consistently avoid VACUUM's index bypass
optimization.
Per off-list report from Nikolay Shaplov.
Backpatch: 14-, where index cleanup reloption was extended.
I failed to account for the possibility that when
ExecAppendAsyncEventWait() notifies multiple async-capable nodes using
postgres_fdw, a preceding node might invoke process_pending_request() to
process a pending asynchronous request made by a succeeding node. In
that case the succeeding node should produce a tuple to return to the
parent Append node from tuples fetched by process_pending_request() when
notified. Repair.
Per buildfarm via Michael Paquier. Back-patch to v14, like the previous
commit.
Thanks to Tom Lane for testing.
Discussion: https://postgr.es/m/YQP0UPT8KmPiHTMs%40paquier.xyz
As of commit 84f5c2908, executing SQL commands (via SPI or otherwise)
requires having either an active Portal, or a caller-established
active snapshot. We were simply Assert'ing that that's the case.
But we've now had a couple different reports of people testing
extensions that didn't meet this requirement, and were confused by
the resulting crash. Let's convert the Assert to a test-and-elog,
in hopes of making the issue clearer for extension authors.
Per gripes from Liu Huailing and RekGRpth. Back-patch to v11,
like the prior commit.
Discussion: https://postgr.es/m/OSZPR01MB6215671E3C5956A034A080DFBEEC9@OSZPR01MB6215.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/17035-14607d308ac8643c@postgresql.org
This fixes a couple of related problems that arise when raising
numbers to very large powers.
Firstly, when raising a negative number to a very large integer power,
the result should be well-defined, but the previous code would only
cope if the exponent was small enough to go through power_var_int().
Otherwise it would throw an internal error, attempting to take the
logarithm of a negative number. Fix this by adding suitable handling
to the general case in power_var() to cope with negative bases,
checking for integer powers there.
Next, when raising a (positive or negative) number whose absolute
value is slightly less than 1 to a very large power, the result should
approach zero as the power is increased. However, in some cases, for
sufficiently large powers, this would lose all precision and return 1
instead of 0. This was due to the way that the local_rscale was being
calculated for the final full-precision calculation:
local_rscale = rscale + (int) val - ln_dweight + 8
The first two terms on the right hand side are meant to give the
number of significant digits required in the result ("val" being the
estimated result weight). However, this failed to account for the fact
that rscale is clipped to a maximum of NUMERIC_MAX_DISPLAY_SCALE
(1000), and the result weight might be less then -1000, causing their
sum to be negative, leading to a loss of precision. Fix this by
forcing the number of significant digits calculated to be nonnegative.
It's OK for it to be zero (when the result weight is less than -1000),
since the local_rscale value then includes a few extra digits to
ensure an accurate result.
Finally, add additional underflow checks to exp_var() and power_var(),
so that they consistently return zero for cases like this where the
result is indistinguishable from zero. Some paths through this code
already returned zero in such cases, but others were throwing overflow
errors.
Dean Rasheed, reviewed by Yugo Nagata.
Discussion: http://postgr.es/m/CAEZATCW6Dvq7+3wN3tt5jLj-FyOcUgT5xNoOqce5=6Su0bCR0w@mail.gmail.com
CheckpointLock was removed in commit d18e75664a, and commit ce197e91d0
updated a leftover comment in CreateCheckPoint, but there was another
copy of it in CreateRestartPoint still.
A pending asynchronous request is handled by process_pending_request(),
which previously not only processed an in-progress remote query but
performed ExecForeignScan() to produce a tuple to return to the local
server asynchronously from the result of the remote query. But that led
to a server crash when executing a query or led to an "InstrStartNode
called twice in a row" or "InstrEndLoop called on running node" failure
when doing EXPLAIN ANALYZE of it, in cases where the plan tree for it
contained multiple async-capable nodes accessing the same
initplan/subplan that contained multiple async-capable nodes scanning
the same foreign tables as for the parent async-capable nodes, as
reported by Andrey Lepikhov. The reason is that the second step in
process_pending_request() invoked when executing the initplan/subplan
for one of the parent async-capable nodes caused recursive execution of
the initplan/subplan for another of the parent async-capable nodes.
To fix, split process_pending_request() into the two steps and postpone
the second step until ForeignAsyncConfigureWait() is called for each of
the pending asynchronous requests. Also, in ExecAppendAsyncEventWait()
we assumed that FDWs would register at least one wait event in a
WaitEventSet created there when they were called from
ForeignAsyncConfigureWait() in that function, but allow FDWs to register
zero wait events in the WaitEventSet; modify ExecAppendAsyncEventWait()
to just return in that case.
Oversight in commit 27e1f1456. Back-patch to v14 where that commit went
in.
Andrey Lepikhov and Etsuro Fujita
Discussion: https://postgr.es/m/fe5eaa19-1704-e4a4-76ee-3b9d37ade399@postgrespro.ru
Buildfarm shows that this test has a further failure mode when a
checkpoint starts earlier than expected, so we detect a "checkpoint
completed" line that's not the one we want. Change the config to try
and prevent this.
Per buildfarm
While at it, update one comment that was forgotten in commit
d18e75664a.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20210729.162038.534808353849568395.horikyota.ntt@gmail.com
Commit ffa2e4670 changed libpq so that multiple error reports
occurring during one operation (a connection attempt or query)
are accumulated in conn->errorMessage, where before new ones
usually replaced any prior error. At least in theory, that makes
us more vulnerable to running out of memory for the errorMessage
buffer. If it did happen, the user would be left with just an
empty-string error report, which is pretty unhelpful.
We can improve this by relying on pqexpbuffer.c's existing "broken
buffer" convention to track whether we've hit OOM for the current
operation's error string, and then substituting a constant "out of
memory" string in the small number of places where the errorMessage
is read out.
While at it, apply the same method to similar OOM cases in
pqInternalNotice and pqGetErrorNotice3.
Back-patch to v14 where ffa2e4670 came in. In principle this could
go back further; but in view of the lack of field reports, the
hazard seems negligible in older branches.
Discussion: https://postgr.es/m/530153.1627425648@sss.pgh.pa.us
Certain versions of msys2/Windows have been observed to resolve symlinks
in perl2host rather than just follow them. This defeats using a
symlinked shorter path to a longer path, and makes certain tests fail.
We therefore call perl2host on the parent directory of the symlink and
thereafter just use that result.
Apply to release 14 where the problem has been observed.
Sometimes cygpath has been observed to return a path with a trailing
slash. That can cause problems, Also, make "cygpath" usage
consistent with "pwd -W" with respect to the use of forward slashes.
Backpatch to release 14 where the current code was introduced.
pg_verifybackup needs by default pg_waldump to check after a range of
WAL segments required for a backup, except if --no-parse-wal is
specified. The code checked for the presence of the binary pg_waldump
in an installation and reported an error, but it forgot to properly
exit(). This could lead to confusing errors reported.
Reviewed-by: Robert Haas, Fabien Coelho
Discussion: https://postgr.es/m/YQDMdB+B68yePFeT@paquier.xyz
Backpatch-through: 13
If a file is truncated, we must update minRecoveryPoint. Once a file is
truncated, there's no going back; it would not be safe to stop recovery
at a point earlier than that anymore.
Commit 7bffc9b7bf changed xact_redo_commit() so that it updates
minRecoveryPoint on truncation, but forgot to change xact_redo_abort().
Back-patch to all supported versions.
Reported-by: mengjuan.cmj@alibaba-inc.com
Author: Fujii Masao
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/b029fce3-4fac-4265-968e-16f36ff4d075.mengjuan.cmj@alibaba-inc.com
This changes the behavior of examining the pg_file_settings view after
changing a config option that requires restart. The user needs to know
that any change of such options does not take effect until a restart,
and this worked correctly if the line is edited without removing it.
However, for the case where the line is removed altogether, the flag
doesn't get set, because a flag was only set in set_config_option, but
that's not called for lines removed. Repair.
(Ref.: commits 62d16c7fc5 and a486e35706)
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/202107262302.xsfdfc5sb7sh@alvherre.pgsql
We failed to deal with an UNKNOWN-type input for
anycompatiblemultirange; that should throw an error indicating
that we don't know how to resolve the multirange type.
We also failed to infer the type of an anycompatiblerange output
from an anycompatiblemultirange input or vice versa.
Per bug #17066 from Alexander Lakhin. Back-patch to v14
where multiranges were added.
Discussion: https://postgr.es/m/17066-16a37f6223a8470b@postgresql.org
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
Add pg_resetxlog -u option to set the oldest xid in pg_control.
Previously -x set this value be -2 billion less than the -x value.
However, this causes the server to immediately scan all relation's
relfrozenxid so it can advance pg_control's oldest xid to be inside the
autovacuum_freeze_max_age range, which is inefficient and might disrupt
diagnostic recovery. pg_upgrade will use this option to better create
the new cluster to match the old cluster.
Reported-by: Jason Harvey, Floris Van Nee
Discussion: https://postgr.es/m/20190615183759.GB239428@rfd.leadboat.com, 87da83168c644fd9aae38f546cc70295@opammb0562.comp.optiver.com
Author: Bertrand Drouvot
Backpatch-through: 9.6
Commit ad600bba04 added psql command \dX listing extended statistics
objects, but it failed to consider search_path when selecting the
elements so some of the returned elements might be invisible.
The visibility was already considered for tab completion (added by
commit d99d58cdc8), so adding it to the query is fairly simple.
Reported and fix by Justin Pryzby, regression tests by me. Backpatch
to PostgreSQL 14, where \dX was introduced.
Batchpatch-through: 14
Author: Justin Pryzby
Reviewed-by: Tatsuro Yamada
Discussion: https://postgr.es/m/c027a541-5856-75a5-0868-341301e1624b%40nttcom.co.jp_1
Adjust the header comment in get_agg_clause_costs so that it matches what
the function currently does. No recursive searching has been done ever
since 0a2bc5d61. It also does not determine the aggtranstype like the
comment claimed. That's all done in preprocess_aggref().
preprocess_aggref also now determines the numOrderedAggs, so remove the
mention that get_agg_clause_costs also calculates "counts".
Normally, since this is just an adjustment of a comment it might not be
worth back-patching, but since this code is new to PG14 and that version
is still in beta, then it seems worth having the comments match.
Discussion: https://postgr.es/m/CAApHDvrrGrTJFPELrjx0CnDtz9B7Jy2XYW3Z2BKifAWLSaJYwQ@mail.gmail.com
Backpatch-though: 14
These have been introduced by 7fbe0c8, and could happen for
pg_basebackup and pg_receivewal.
Per report from Coverity for the ones in walmethods.c, I have spotted
the ones in receivelog.c after more review.
Backpatch-through: 10
The point of introducing the hash_mem_multiplier GUC was to let users
reproduce the old behavior of hash aggregation, i.e. that it could use
more than work_mem at need. However, the implementation failed to get
the job done on Win64, where work_mem is clamped to 2GB to protect
various places that calculate memory sizes using "long int". As
written, the same clamp was applied to hash_mem. This resulted in
severe performance regressions for queries requiring a bit more than
2GB for hash aggregation, as they now spill to disk and there's no
way to stop that.
Getting rid of the work_mem restriction seems like a good idea, but
it's a big job and could not conceivably be back-patched. However,
there's only a fairly small number of places that are concerned with
the hash_mem value, and it turns out to be possible to remove the
restriction there without too much code churn or any ABI breaks.
So, let's do that for now to fix the regression, and leave the
larger task for another day.
This patch does introduce a bit more infrastructure that should help
with the larger task, namely pg_bitutils.h support for working with
size_t values.
Per gripe from Laurent Hasson. Back-patch to v13 where the
behavior change came in.
Discussion: https://postgr.es/m/997817.1627074924@sss.pgh.pa.us
Discussion: https://postgr.es/m/MN2PR15MB25601E80A9B6D1BA6F592B1985E39@MN2PR15MB2560.namprd15.prod.outlook.com
5a1e1d8302 was a minimal bug fix for dc7420c2c9. To avoid future bugs of
that kind, deduplicate the choice of a relation's horizon into a new helper,
GlobalVisHorizonKindForRel().
As the code in question was only introduced in dc7420c2c9 it seems worth
backpatching this change as well, otherwise 14 will look different from all
other branches.
A different approach to this was suggested by Matthias van de Meent.
Author: Andres Freund
Discussion: https://postgr.es/m/20210621122919.2qhu3pfugxxp3cji@alap3.anarazel.de
Backpatch: 14, like 5a1e1d8302
We have an implementation restriction that PREPARE TRANSACTION can't
handle cases where both session-lifespan and transaction-lifespan locks
are held on the same lockable object. (That's because we'd otherwise
need to acquire a new PROCLOCK entry during post-prepare cleanup, which
is an operation that might fail. The situation can only arise with odd
usages of advisory locks, so removing the restriction is probably not
worth the amount of effort it would take.) AtPrepare_Locks attempted
to enforce this, but its logic was many bricks shy of a load, because
it only detected cases where the session and transaction locks had the
same lockmode. Locks of different modes on the same object would lead
to the rather unhelpful message "PANIC: we seem to have dropped a bit
somewhere".
To fix, build a transient hashtable with one entry per locktag,
not one per locktag + mode, and use that to detect conflicts.
Per bug #17122 from Alexander Pyhalov. This bug is ancient,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17122-04f3c32098a62233@postgresql.org
We previously took a hard-line attitude that callers should never print
a null string pointer, and doing so is worthy of an assertion failure
or crash. However, we've long since flushed out any easy-to-find bugs
of that nature. What remains is a lot of code that perhaps could fail
that way in hard-to-reach corner cases. For example, in something as
simple as
ereport(ERROR,
(errcode(ERRCODE_UNDEFINED_OBJECT),
errmsg("constraint \"%s\" for table \"%s\" does not exist",
conname, get_rel_name(relid))));
one must wonder whether it's completely guaranteed that get_rel_name
cannot return NULL in this context. If such a situation did occur,
the existing policy converts what might be a pretty minor bug into
a server crash condition. This is not good for robustness.
Hence, let's follow the lead of glibc and print "(null)" instead
of failing. We should, of course, still consider it a bug if that
behavior is reachable in ordinary use; but crashing seems less
desirable than not crashing.
This fix works across-the-board in v12 and up, where we always use
src/port/snprintf.c. Before that, on most platforms we're at the mercy
of the local libc, but it appears that Solaris 10 is the only supported
platform where we'd still get a crash. Most other platforms such as
*BSD, macOS, and Solaris 11 have adopted glibc's behavior at some
point. (AIX and HPUX just print "" not "(null)", but that's close
enough.) I've not checked what Windows' native printf would do, but
it doesn't matter because we've long used snprintf.c on that platform.
In v12 and up, also const-ify related code so that we're not casting
away const on the constant string. This is just neatnik-ism, since
next to no compilers will warn about that.
Discussion: https://postgr.es/m/17098-b960f3616c861f83@postgresql.org
Code inlined by LLVM can crash or fail with "Relocation type not
implemented yet!" if it tries to access thread local variables. Don't
inline such code.
Back-patch to 11, where LLVM arrived. Bug #16696.
Author: Dmitry Marakasov <amdmi3@amdmi3.ru>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/16696-29d944a33801fbfe@postgresql.org
In postgresql.conf, memory and file size GUCs can be specified with "B"
(bytes) as of b06d8e58b. Likewise, time GUCs can be specified with "us"
(microseconds) as of caf626b2c. Update postgres.conf.sample to reflect
that fact.
Pavel Luzanov
Backpatch to v12, which is the earliest version that allows both of
these units. A separate commit will document the "B" case for v11.
Discussion: https://www.postgresql.org/message-id/flat/f10d16fc-8fa0-1b3c-7371-cb3a35a13b7a%40postgrespro.ru
If an error was raised during our initial attempt to check whether
a successfully-compiled expression is "simple", subsequent calls of
exec_stmt_execsql would suppose that stmt->mod_stmt was already computed
when it had not been. This could lead to assertion failures in debug
builds; in production builds the effect would typically be to act as
if INTO STRICT had been specified even when it had not been. Of course
that only matters if the subsequent attempt to execute the expression
succeeds, so that the problem can only be reached by fixing a failure
in some referenced, inline-able SQL function and then retrying the
calling plpgsql function in the same session.
(There might be even-more-obscure ways to change the expression's
behavior without changing the plpgsql function, but that one seems
like the only one people would be likely to hit in practice.)
The most foolproof way to fix this would be to arrange for
exec_prepare_plan to not set expr->plan until we've finished the
subsidiary simple-expression check. But it seems hard to do that
without creating reference-count leak issues. So settle for documenting
the hazard in a comment and fixing exec_stmt_execsql to test separately
for whether it's computed stmt->mod_stmt. (That adds a test-and-branch
per execution, but hopefully that's negligible in context.) In v11 and
up, also fix exec_stmt_call which had a variant of the same issue.
Per bug #17113 from Alexander Lakhin. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/17113-077605ce00e0e7ec@postgresql.org
The logic handling the opening of new WAL segments was fuzzy when using
--compress if a partial, non-compressed, segment with the same base name
existed in the repository storing those files. In this case, using
--compress would cause the code to first check for the existence and the
size of a non-compressed segment, followed by the opening of a new
compressed, partial, segment. The code was accidentally working
correctly on most platforms as the buildfarm has proved, except
bowerbird where gzflush() could fail in this code path. It is wrong
anyway to take the code path used pre-padding when creating a new
partial, non-compressed, segment, so let's fix it.
Note that this issue exists when users mix successive runs of
pg_receivewal with or without compression, as discovered with the tests
introduced by ffc9dda.
While on it, this refactors the code so as code paths that need to know
about the ".gz" suffix are down from four to one in walmethods.c, easing
a bit the introduction of new compression methods. This addresses a
second issue where log messages generated for an unexpected failure
would not show the compressed segment name involved, which was
confusing, printing instead the name of the non-compressed equivalent.
Reported-by: Georgios Kokolatos
Discussion: https://postgr.es/m/YPDLz2x3o1aX2wRh@paquier.xyz
Backpatch-through: 10
Commit 3499df0d added a comment that incorrectly suggested that
--force-index-cleanup did not appear in the same major version as the
similar --no-index-cleanup option. In fact, both options are new to
PostgreSQL 14.
Backpatch: 14-, where both options were introduced.
We don't allow to create replication slot_name as an empty string ('') via
SQL API pg_create_logical_replication_slot() but it is allowed to be set
via Alter Subscription command. This will lead to apply worker repeatedly
keep trying to stream data via slot_name '' and the user is not allowed to
create the slot with that name.
Author: Japin Li
Reviewed-By: Ranier Vilela, Amit Kapila
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/MEYP282MB1669CBD98E721C77CA696499B61A9@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
It has been spotted that multiranges lack of ability to decompose them into
individual ranges. Subscription and proper expanded object representation
require substantial work, and it's too late for v14. This commit
provides the implementation of unnest(multirange), which is quite trivial.
unnest(multirange) is defined as a polymorphic procedure.
Catversion is bumped.
Reported-by: Jonathan S. Katz
Discussion: https://postgr.es/m/flat/60258efe-bd7e-4886-82e1-196e0cac5433%40postgresql.org
Author: Alexander Korotkov
Reviewed-by: Justin Pryzby, Jonathan S. Katz, Zhihong Yu, Tom Lane
Reviewed-by: Alvaro Herrera
The new test code added in ead9e51e82 is racy -- it hinges on
shared-memory state, which changes before the WARNING message is logged.
Put it the other way around.
Backpatch to 13.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202107161809.zclasccpfcg3@alvherre.pgsql
pg_dump failed to preserve the 'enabled' flag (which can be not only
disabled, but also REPLICA or ALWAYS) for partitions which had it
changed from their respective parents. Attempt to handle that by
including a definition for such triggers in the dump, but replace the
standard CREATE TRIGGER line with an ALTER TRIGGER line.
Backpatch to 11, where these triggers can exist. In branches 11 and 12,
pick up a few test lines from commit b9b408c487 to verify that
pg_upgrade is okay with these arrangements.
Co-authored-by: Justin Pryzby <pryzby@telsasoft.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200930223450.GA14848@telsasoft.com
When triggers are cloned from partitioned tables to their partitions,
the 'tgenabled' flag (origin/replica/always/disable) was not propagated.
Make it so that the flag on the trigger on partition is initially set to
the same value as on the partitioned table.
Add a test case to verify the behavior.
Backpatch to 11, where this appeared in commit 86f575948c.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200930223450.GA14848@telsasoft.com
When some slots are invalidated due to the max_slot_wal_keep_size limit,
the old segment horizon should move forward to stay within the limit.
However, in commit c655077639 we forgot to call KeepLogSeg again to
recompute the horizon after invalidating replication slots. In cases
where other slots remained, the limits would be recomputed eventually
for other reasons, but if all slots were invalidated, the limits would
not move at all afterwards. Repair.
Backpatch to 13 where the feature was introduced.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Marcin Krupowicz <mk@071.ovh>
Discussion: https://postgr.es/m/17103-004130e8f27782c9@postgresql.org
Autoconf's AC_CHECK_DECLS() always defines HAVE_DECL_whatever
as 1 or 0, but some of the entries in msvc/Solution.pm showed
such symbols as "undef" instead of 0. Fix that for consistency.
There's no live bug in current usages AFAICS, but it's not hard
to imagine one creeping in if more-complex #if tests get added.
Back-patch to v13, which is as far back as Solution.pm contains
this data. The inconsistency still exists in the manually-filled
pg_config_ext.h.win32 files of older branches; but as long as the
problem is only latent, it doesn't seem worth the trouble to
clean things up there.
Discussion: https://postgr.es/m/3185430.1626133592@sss.pgh.pa.us
This commit fixes the description of a couple of multirange operators and
oprjoin for another multirange operator. The change of oprjoin is more
cosmetic since both old and new functions return the same constant.
These cosmetic changes don't worth catalog incompatibility between 14beta2
and 14beta3. So, catversion isn't bumped.
Discussion: https://postgr.es/m/CAPpHfdv9OZEuZDqOQoUKpXhq%3Dmc-qa4gKCPmcgG5Vvesu7%3Ds1w%40mail.gmail.com
Backpatch-throgh: 14
Some commands of ALTER TABLE could fail with the following error:
ERROR: "tab" is of the wrong type
This error is unexpected, as all the code paths leading to
ATWrongRelkindError() should use a supported set of relkinds to generate
correct error messages. This commit closes the gap with such mistakes,
by adding all the missing relkind combinations. Tests are added to
check all the problems found. Note that some combinations are not used,
but these are left around as it could have an impact on applications
relying on this code.
2ed532e has done a much larger refactoring on HEAD to make such error
messages easier to manage in the long-term, so nothing is needed there.
Author: Kyotaro Horiguchi
Reviewed-by: Peter Eisentraut, Ahsan Hadi, Michael Paquier
Discussion: https://postgr.es/m/20210216.181415.368926598204753659.horikyota.ntt@gmail.com
Backpatch-through: 11
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
41469253e went to the trouble of removing a theoretical bug from
free_sort_tuple by checking if the tuple was NULL before freeing it. Let's
make this a little more robust by also setting the tuple to NULL so that
should we be called again we won't end up doing a pfree on the already
pfree'd tuple. Per advice from Tom Lane.
Discussion: https://postgr.es/m/3188192.1626136953@sss.pgh.pa.us
Backpatch-through: 9.6, same as 41469253e
This fixes a theoretical bug in tuplesort.c which, if a bounded sort was
used in combination with a byval Datum sort (tuplesort_begin_datum), when
switching the sort to a bounded heap in make_bounded_heap(), we'd call
free_sort_tuple(). The problem was that when sorting Datums of a byval
type, the tuple is NULL and free_sort_tuple() would free the memory for it
regardless of that. This would result in a crash.
Here we fix that simply by adding a check to see if the tuple is NULL
before trying to disassociate and free any memory belonging to it.
The reason this bug is only theoretical is that nowhere in the current
code base do we do tuplesort_set_bound() when performing a Datum sort.
However, let's backpatch a fix for this as if any extension uses the code
in this way then it's likely to cause problems.
Author: Ronan Dunklau
Discussion: https://postgr.es/m/CAApHDvpdoqNC5FjDb3KUTSMs5dg6f+XxH4Bg_dVcLi8UYAG3EQ@mail.gmail.com
Backpatch-through: 9.6, oldest supported version
Apple's mechanism for dealing with functions that are available
in only some OS versions confuses AC_CHECK_FUNCS, and therefore
AC_REPLACE_FUNCS. We can use AC_CHECK_DECLS instead, so long as
we enable -Werror=unguarded-availability-new. This allows people
compiling for macOS to control whether or not preadv/pwritev are
used by setting MACOSX_DEPLOYMENT_TARGET, rather than supplying
a back-rev SDK. (Of course, the latter still works, too.)
James Hilliard
Discussion: https://postgr.es/m/20210122193230.25295-1-james.hilliard1@gmail.com
This should have been removed in commit 7e30c186da, which split the loop
into two. Only the first loop uses the 'from' variable; updating it in
the second loop is bogus. It was never read after the first loop, so this
was harmless and surely optimized away by the compiler, but let's be tidy.
Backpatch to all supported versions.
Author: Ranier Vilela
Discussion: https://www.postgresql.org/message-id/CAEudQAoWq%2BAL3BnELHu7gms2GN07k-np6yLbukGaxJ1vY-zeiQ%40mail.gmail.com
This reverts commit 54fb8c7, as per the issues reported by fairywren
when it comes to MinGW because of the lack of microsoft_native_stat()
there. Using just stat() for MSVC is not sufficient to take care of the
concurrency problems with files pending on deletion. It may be possible
to paint some __MINGW64__ in the code to switch to a different
implementation of stat() in this build context, but I am not sure either
if relying on the implementation of stat() in MinGW to take care of the
problems we are trying to fix is enough or not. So this needs more
study.
Discussion: https://postgr.es/m/YOvOlfRrIO0yGtgw@paquier.xyz
Backpatch-through: 14
The code introduced by bed9075 to enhance the stat() implementation on
Windows for file sizes larger than 4GB fails to properly detect files
pending for deletion with its method based on NtQueryInformationFile()
or GetFileInformationByHandleEx(), as proved by Alexander Lakhin in a
custom TAP test of his own.
The method used in the implementation of open() to sleep and loop when
when failing on ERROR_ACCESS_DENIED (EACCES) is showing much more
stability, so switch to this method. This could still lead to issues if
the permission problem stays around for much longer than the timeout of
1 second used, but that should (hopefully) never happen in
performance-critical paths. Still, there could be a point in increasing
the timeouts for the sake of machines that handle heavy loads.
Note that WIN32's open() now uses microsoft_native_stat() as it should
be similar to stat() when working around issues with concurrent file
deletions.
I have spent some time testing this patch with pgbench in combination
of the SQL functions from genfile.c, as well as running the TAP test
provided on the thread with MSVC builds, and this looks much more
stable than the previous method.
Author: Alexander Lakhin
Reviewed-by: Tom Lane, Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/c3427edf-d7c0-ff57-90f6-b5de3bb62709@gmail.com
Backpatch-through: 14
Although we were careful to lock the object being added or dropped,
we failed to get any sort of lock on the extension itself. This
allowed the ALTER to proceed in parallel with a DROP EXTENSION,
which is problematic for a couple of reasons. If both commands
succeeded we'd be left with a dangling link in pg_depend, which
would cause problems later. Also, if the ALTER failed for some
reason, it might try to print the extension's name, and that could
result in a crash or (in older branches) a silly error message
complaining about extension "(null)".
Per bug #17098 from Alexander Lakhin. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/17098-b960f3616c861f83@postgresql.org
Commit 547f04e changed pgbench to use microsecond accounting, but
introduced a couple of logging and aggregation bugs:
1. We print Unix epoch timestamps so that you can correlate them with
other logs, but these were inadvertently changed to use a
system-dependent reference epoch. Compute Unix timestamps, and begin
aggregation intervals on the boundaries of whole Unix epoch seconds, as
before.
2. The user-supplied aggregation interval needed to be scaled.
Back-patch to 14.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Author: Yugo NAGATA <nagata@sraoss.co.jp>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: YoungHwan Joo <rulyox@gmail.com>
Reported-by: Gregory Smith <gregsmithpgsql@gmail.com>
Discussion: https://postgr.es/m/CAF7igB1r6wRfSCEAB-iZBKxkowWY6%2BdFF2jObSdd9%2BiVK%2BvHJg%40mail.gmail.com
Discussion: https://postgr.es/m/CAHLJuCW_8Vpcr0%3Dt6O_gozrg3wXXWXZXDioYJd3NhvKriqgpfQ%40mail.gmail.com
If an error occurred in the wrong place, it was possible to leave an
unintialized entry in the hash table, leading to a crash. Fixed.
Also, be more careful about the order of operations so that an
allocation error doesn't leak memory in CacheMemoryContext or
unnecessarily advance NextRecordTypmod.
Backpatch through version 11. Earlier versions (prior to 35ea75632a)
do not exhibit the problem, because an uninitialized hash entry
contains a valid empty list.
Author: Sait Talha Nisanci <Sait.Nisanci@microsoft.com>
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/HE1PR8303MB009069D476225B9A9E194B8891779@HE1PR8303MB0090.EURPRD83.prod.outlook.com
Backpatch-through: 11
This fixes an overflow error when using the numeric * operator if the
result has more than 16383 digits after the decimal point by rounding
the result. Overflow errors should only occur if the result has too
many digits *before* the decimal point.
Discussion: https://postgr.es/m/CAEZATCUmeFWCrq2dNzZpRj5+6LfN85jYiDoqm+ucSXhb9U2TbA@mail.gmail.com
When sending queries in pipeline mode, we were careless about leaving
the connection in the right state so that PQgetResult would behave
correctly; trying to read further results after sending a query after
having read a result with an error would sometimes hang. Fix by
ensuring internal libpq state is changed properly. All the state
changes were being done by the callers of pqAppendCmdQueueEntry(); it
would have become too repetitious to have this logic in each of them, so
instead put it all in that function and relieve callers of the
responsibility.
Add a test to verify this case. Without the code fix, this new test
hangs sometimes.
Also, document that PQisBusy() would return false when no queries are
pending result. This is not intuitively obvious, and NULL would be
obtained by calling PQgetResult() at that point, which is confusing.
Wording by Boris Kolpackov.
In passing, fix bogus use of "false" to mean "0", per Ranier Vilela.
Backpatch to 14.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Discussion: https://postgr.es/m/boris.20210624103805@codesynthesis.com
Commit 7266d0997 added code to pull up simple constant function
results, converting the RTE_FUNCTION RTE to a dummy RTE_RESULT
RTE since it no longer need be scanned. But I forgot to clear
the LATERAL flag if the RTE has it set. If the function reduced
to a constant, it surely contains no lateral references so this
simplification is logically OK. It's needed because various other
places will Assert that RESULT RTEs aren't LATERAL.
Per bug #17097 from Yaoguang Chen. Back-patch to v13 where the
faulty code came in.
Discussion: https://postgr.es/m/17097-3372ef9f798fc94f@postgresql.org
The separate libldap_r is gone and libldap itself is now always
thread-safe. Unfortunately there seems no easy way to tell by
inspection whether libldap is thread-safe, so we have to take
it on faith that libldap is thread-safe if there's no libldap_r.
That should be okay, as it appears that libldap_r was a standard
part of the installation going back at least 20 years.
Report and patch by Adrian Ho. Back-patch to all supported
branches, since people might try to build any of them with
a newer OpenLDAP.
Discussion: https://postgr.es/m/17083-a19190d9591946a7@postgresql.org
Since the executor can't cope with a utility statement appearing
as a node of a plan tree, we can't support cases where a rewrite
rule inserts a NOTIFY into an INSERT/UPDATE/DELETE command appearing
in a WITH clause of a larger query. (One can imagine ways around
that, but it'd be a new feature not a bug fix, and so far there's
been no demand for it.) RewriteQuery checked for this, but it
missed the case where the DML command rewrites to *only* a NOTIFY.
That'd lead to crashes later on in planning. Add the missed check,
and improve the level of testing of this area.
Per bug #17094 from Yaoguang Chen. It's been busted since WITH
was introduced, so back-patch to all supported branches.
Discussion: https://postgr.es/m/17094-bf15dff55eaf2e28@postgresql.org
Due to how pg_size_pretty(bigint) was implemented, it's possible that when
given a negative number of bytes that the returning value would not match
the equivalent positive return value when given the equivalent positive
number of bytes. This was due to two separate issues.
1. The function used bit shifting to convert the number of bytes into
larger units. The rounding performed by bit shifting is not the same as
dividing. For example -3 >> 1 = -2, but -3 / 2 = -1. These two
operations are only equivalent with positive numbers.
2. The half_rounded() macro rounded towards positive infinity. This meant
that negative numbers rounded towards zero and positive numbers rounded
away from zero.
Here we fix#1 by dividing the values instead of bit shifting. We fix#2
by adjusting the half_rounded macro always to round away from zero.
Additionally, adjust the pg_size_pretty(numeric) function to be more
explicit that it's using division rather than bit shifting. A casual
observer might have believed bit shifting was used due to a static
function being named numeric_shift_right. However, that function was
calculating the divisor from the number of bits and performed division.
Here we make that more clear. This change is just cosmetic and does not
affect the return value of the numeric version of the function.
Here we also add a set of regression tests both versions of
pg_size_pretty() which test the values directly before and after the
function switches to the next unit.
This bug was introduced in 8a1fab36a. Prior to that negative values were
always displayed in bytes.
Author: Dean Rasheed, David Rowley
Discussion: https://postgr.es/m/CAEZATCXnNW4HsmZnxhfezR5FuiGgp+mkY4AzcL5eRGO4fuadWg@mail.gmail.com
Backpatch-through: 9.6, where the bug was introduced.
Commit 03ffc4d6d added logic to bypass all caching behavior in
LookupOpclassInfo when CLOBBER_CACHE_ALWAYS is enabled. It doesn't
look like I stopped to think much about what that would cost, but
recent investigation shows that the cost is enormous: it roughly
doubles the time needed for cache-clobber test runs.
There does seem to be value in this behavior when trying to test
the opclass-cache loading logic itself, but for other purposes the
cost is excessive. Hence, let's back off to doing this only when
debug_invalidate_system_caches_always is at least 3; or in older
branches, when CLOBBER_CACHE_RECURSIVELY is defined.
While here, clean up some other minor issues in LookupOpclassInfo.
Re-order the code so we aren't left with broken cache entries (leading
to later core dumps) in the unlikely case that we suffer OOM while
trying to allocate space for a new entry. (That seems to be my
oversight in 03ffc4d6d.) Also, in >= v13, stop allocating one array
entry too many. That's evidently left over from sloppy reversion in
851b14b0c.
Back-patch to all supported branches, mainly to reduce the runtime
of cache-clobbering buildfarm animals.
Discussion: https://postgr.es/m/1370856.1625428625@sss.pgh.pa.us
In 741d7f104, I tried to make the reports from canceled steps come out
after the pg_cancel_backend() steps, since that was the most common
ordering before. However, that doesn't ensure that a canceled step
doesn't report even later, as shown in a recent failure on buildfarm
member idiacanthus. Rather than complicating things even more with
additional annotations, let's just force the cancel's effect to be
reported first. It's not *that* unnatural-looking.
Back-patch to v14 where these test cases appeared.
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=idiacanthus&dt=2021-07-02%2001%3A40%3A04
The existing code tried to do syscache lookups in an already-failed
transaction, which is problematic to say the least. After some
consideration of alternatives, the best fix seems to be to just drop
type names from the error message altogether. The table and column
names seem like sufficient localization. If the user is unsure what
types are involved, she can check the local and remote table
definitions.
Having done that, we can also discard the LogicalRepTypMap hash
table, which had no other use. Arguably, LOGICAL_REP_MSG_TYPE
replication messages are now obsolete as well; but we should
probably keep them in case some other use emerges. (The complexity
of removing something from the replication protocol would likely
outweigh any savings anyhow.)
Masahiko Sawada and Bharath Rupireddy, per complaint from Andres
Freund. Back-patch to v10 where this code originated.
Discussion: https://postgr.es/m/20210106020229.ne5xnuu6wlondjpe@alap3.anarazel.de
Commit 4656e3d66 replaced the "#define CLOBBER_CACHE_ALWAYS"
testing mechanism with a GUC, which has been a great help for
doing cache-clobber testing in more efficient ways; but there
is a gap in the implementation. The only way to do cache-clobber
testing during an initdb run is to use the old method with #define,
because one can't set the GUC from outside. Improve this by
adding a switch to initdb for the purpose.
(Perhaps someday we should let initdb pass through arbitrary
"-c NAME=VALUE" switches. Quoting difficulties dissuaded me
from attempting that right now, though.)
Back-patch to v14 where 4656e3d66 came in.
Discussion: https://postgr.es/m/1582507.1624227029@sss.pgh.pa.us
Commit 0e69f705cc introduced code to analyze partitioned table;
however, that code fails to preserve pg_class.relhasindex correctly.
Fix by observing whether any indexes exist rather than accidentally
falling through to assuming none do.
Backpatch to 14.
Author: Alexander Pyhalov <a.pyhalov@postgrespro.ru>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CALNJ-vS1R3Qoe5t4tbzxrkpBtzRbPq1dDcW4RmA_a+oqweF30w@mail.gmail.com
The prove_installcheck recipe in src/Makefile.global.in was emitting
bogus paths for a couple of elements when used with PGXS. Here we create
a separate recipe for the PGXS case that does it correctly. We also take
the opportunity to make the make the file more readable by breaking up
the prove_installcheck and prove_check recipes across several lines, and
to remove the setting for REGRESS_SHLIB to src/test/recovery/Makefile,
which is the only set of tests that actually need it.
Backpatch to all live branches
Discussion: https://postgr.es/m/f2401388-936b-f4ef-a07c-a0bcc49b3300@dunslane.net
Until now, we didn't allow to stream the changes in logical replication
till we receive speculative confirm or the next DML change record after
speculative inserts. The reason was that we never use to process
speculative aborts but after commit 4daa140a2f it is possible to process
them so we can allow streaming once we receive speculative abort after
speculative insertion.
We decided to backpatch to 14 where the feature for streaming in progress
transactions have been introduced as this is a minor change and makes that
functionality better.
Author: Amit Kapila
Reviewed-By: Dilip Kumar
Backpatch-through: 14
Discussion: https://postgr.es/m/CAA4eK1KdqmTCtrBR6oFfGELrLLbDLDedL6zACcsUOQuTJBj1vw@mail.gmail.com
* Fix enumeration of the multirange operators in calc_multirangesel() and
calc_multirangesel() switches.
* Add more regression tests for matching to empty ranges/multiranges.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/c5269c65-f967-77c5-ff7c-15e621c47f6a%40gmail.com
Author: Alexander Korotkov
Backpatch-through: 14, where multiranges were introduced
The original coding required that PQpipelineSync had been called before
the first call to PQgetResult, and failure to do that would result in an
unexpected NULL result being returned. Fix by setting the right state
when a query is sent, rather than leaving it unchanged and having
PQpipelineSync apply the necessary state change.
A new test case to verify the behavior is added, which relies on the new
PQsendFlushRequest() function added by commit a7192326c7.
Backpatch to 14, where pipeline mode was added.
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/boris.20210616110321@codesynthesis.com
This new libpq function allows the application to send an 'H' message,
which instructs the server to flush its outgoing buffer.
This hasn't been needed so far because the Sync message already requests
a buffer; and I failed to realize that this was needed in pipeline mode
because PQpipelineSync also causes the buffer to be flushed. However,
sometimes it is useful to request a flush without establishing a
synchronization point.
Backpatch to 14, where pipeline mode was introduced in libpq.
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202106252350.t76x73nt643j@alvherre.pgsql
Commit efbfb6424 added logic for reporting exactly which existing
partition conflicts when complaining that a new hash partition's
modulus isn't compatible with the existing ones. However, it
misunderstood the partitioning data structure, and would select
the wrong partition in some cases, or crash outright due to fetching
a bogus table OID in other cases.
Per bug #17076 from Alexander Lakhin. Fix by Amit Langote;
some further work on the code comments by me.
Discussion: https://postgr.es/m/17076-89a16ae835d329b9@postgresql.org
Causing a core dump on out-of-memory seems pretty unfriendly,
and surely is far outside the expected behavior of a general-purpose
library. Just print an error message (as we did already) and return.
These functions unfortunately don't have an error return convention,
but code using them is probably just looking for a quick-n-dirty
print method and wouldn't bother to check anyway.
Although these functions are semi-deprecated, it still seems
appropriate to back-patch this. In passing, also back-patch
b90e6cef1, just to reduce cosmetic differences between the
branches.
Discussion: https://postgr.es/m/3122443.1624735363@sss.pgh.pa.us
Instead use the common/int.h functions to check for integer overflow
in a more C-standard-compliant fashion. This is motivated by recent
failures on buildfarm member moonjelly, where it appears that
development-tip gcc is optimizing without regard to the -fwrapv
switch. Presumably that's a gcc bug that will be fixed soon, but
we might as well install cleaner coding here rather than wait.
(This does not address the question of whether we'll ever be able
to get rid of using -fwrapv. Testing shows that this spot is the
only place where doing so creates visible regression test failures,
but unfortunately that proves very little.)
Back-patch to v12. The common/int.h functions exist in v11, but
that branch doesn't use them in any client-side code. I judge
that this case isn't interesting enough in the real world to take
even a small risk of issues from being the first such use.
Tom Lane and Fabien Coelho
Discussion: https://postgr.es/m/73927.1624815543@sss.pgh.pa.us
We were using RelationGetIndexList() to update the relation's replica
identity index but instead, we can directly use RelationGetReplicaIndex()
which uses the same functionality. This is a minor code readability
improvement.
Author: Japin Li
Reviewed-By: Takamichi Osumi, Amit Kapila
Discussion: https://postgr.es/m/4C99A862-69C8-431F-960A-81B1151F1B89@enterprisedb.com
When we cannot immediately acquire XactSLRULock in exclusive mode at
commit time, we add ourselves to a list of processes that need their XIDs
status update. We do this if the clog page where we need to update the
current transaction status is the same as the group leader's clog page,
otherwise, we allow the caller to clear it by itself. Now, when we can't
add ourselves to any group, we were not clearing the current proc if it
has already become a member of some group which was leading to an
assertion failure when the same proc was assigned to another backend after
the current backend exits.
Reported-by: Alexander Lakhin
Bug: 17072
Author: Amit Kapila
Tested-By: Alexander Lakhin
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/17072-2f8764857ef2c92a@postgresql.org
The setting has no effect except during startup. It's still nice to be
able to change it dynamically, which is expected to be pretty useful to
an admin following crash recovery when restarting the cluster is not so
appealing.
Per discussions following commits 2941138e6 and 61752afb2.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20210529192321.GM2082%40telsasoft.com
copy_data is not a supported option with this sub-command of ALTER
SUBSCRIPTION, which would not make a variable related to it initialized
after parsing the option set in DefElems. A refresh could then refer to
it.
Author: Ranier Vilela
Reviewed-by: Peter Smith
Discussion: https://postgr.es/m/CAEudQAp5P8nr=ze2Gv=BMj=DJFZnrvendZCZcC-fos3QiDe2sg@mail.gmail.com
83158f7 has improved index_set_state_flags() so as it is possible to use
transactional updates when updating pg_index state flags, but there was
not really a test case which stressed directly the possibility it fixed.
This commit adds such a test, using a predicate that looks valid in
appearance but calls a stable function.
Author: Andrey Lepikhov
Discussion: https://postgr.es/m/9b905019-5297-7372-0ad2-e1a4bb66a719@postgrespro.ru
Backpatch-through: 9.6
specscanner.l leaked a kilobyte of memory per token of the spec file.
Apparently somebody thought that the introductory code block would be
executed once; but it's once per yylex() call.
A couple of functions in isolationtester.c leaked small amounts of
memory due to not bothering to free one-time allocations. Might
as well improve these so that valgrind gives this program a clean
bill of health. Also get rid of an ugly static variable.
Coverity complained about one of the one-time leaks, which led me
to try valgrind'ing isolationtester, which led to discovery of the
larger leak.
Commit c0cb87fbb unwisely introduced a dependency on the StringInfo
machinery in fe-connect.c. We must not use that in libpq, because
it will do a summary exit(1) if it hits OOM, and that is not
appropriate behavior for a general-purpose library. The goal of
allowing arbitrary line lengths in service files doesn't seem like
it's worth a lot of effort, so revert back to the previous method
of using a stack-allocated buffer and failing on buffer overflow.
This isn't an exact revert though. I kept that patch's refactoring
to have a single exit path, as that seems cleaner than having each
error path know what to do to clean up. Also, I made the fixed-size
buffer 1024 bytes not 256, just to push off the need for an expandable
buffer some more.
There is more to do here; in particular the lack of any mechanical
check for this type of mistake now seems pretty hazardous. But this
fix gets us back to the level of robustness we had in v13, anyway.
Discussion: https://postgr.es/m/daeb22ec6ca8ef61e94d766a9b35fb03cabed38e.camel@vmware.com
The version string is grabbed from PACKAGE_VERSION in pg_config.h in the
MSVC build since 8f4fb4c6, but an error message referenced a variable
that existed before that. This had no consequences except if one messes
up enough with the version number of the build.
Author: Anton Voloshin
Discussion: https://postgr.es/m/af79ee1b-9962-b299-98e1-f90a289e19e6@postgrespro.ru
Backpatch-through: 13
002_pgbench_no_server was printing some array pointers instead of the
actual contents of those arrays for the expected outputs of stdout and
stderr for a tested command. This does not add any new information that
can help with debugging as the test names allow to track failure
locations, if any.
This commit simply removes those logs as the rest of the printed
information is redundant with command_checks_all().
Per discussion with Andrew Dunstan and Álvaro Herrera.
Discussion: https://postgr.es/m/YNXNFaG7IgkzZanD@paquier.xyz
Backpatch-through: 11
It's not really necessary for this function to open or lock the
relation associated with the pg_policy entry it's modifying. The
error checks it's making on the rel are if anything counterproductive
(e.g., if we don't want to allow installation of policies on system
catalogs, here is not the place to prevent that). In particular, it
seems just wrong to insist on an ownership check. That has the net
effect of forcing people to use superuser for DROP OWNED BY, which
surely is not an effect we want. Also there is no point in rebuilding
the dependencies of the policy expressions, which aren't being
changed. Lastly, locking the table also seems counterproductive; it's
not helping to prevent race conditions, since we failed to re-read the
pg_policy row after acquiring the lock. That means that concurrent
DDL would likely result in "tuple concurrently updated/deleted"
errors; which is the same behavior this code will produce, with less
overhead.
Per discussion of bug #17062. Back-patch to all supported versions,
as the failure cases this eliminates seem just as undesirable in 9.6
as in HEAD.
Discussion: https://postgr.es/m/1573181.1624220108@sss.pgh.pa.us
This fixes a couple of problems within the so-said code of this commit
subject:
- Replace the use of open() with slurp_file(), fixing an issue reported
by buildfarm member fairywren whose perl installation keep around CRLF
characters, causing the matching patterns for the logs to fail.
- Remove the eval block, which is not really necessary.
This set of issues has come into light after fixing a different issue
with c13585fe, and this is wrong since this code has been introduced.
Reported-by: Andrew Dunstan, and buildfarm member fairywren
Author: Michael Paquier
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/0f49303e-7784-b3ee-200b-cbf67be2eb9e@dunslane.net
Backpatch-through: 11
ALTER SUBSCRIPTION DROP PUBLICATION does not actually support
copy_data option, so remove it from tab completion.
Also, reword the error message that is thrown when all the
publications from a subscription are specified to be dropped.
Also, made few doc and cosmetic adjustments.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddy@enterprisedb.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CALDaNm21RwsDzs4xj14ApteAF7auyyomHNnp+NEL-sH8m-jMvQ@mail.gmail.com
fairywren is not happy with the pattern checks introduced by c13585f.
I am not sure if this outlines a bug in pgbench or if the regex patterns
used in the tests are too restrictive for this buildfarm member's
environment. This adds more debugging information to show the log
entries that do not match with the expected pattern, to help in finding
out what's happening. That seems like a good addition in the long-term
anyway as that may not be the only issue in this area.
Discussion: https://postgr.es/m/YNUad2HvgW+6eXyo@paquier.xyz
The main goal of this option is to allow inspecting temporary files for
debugging purposes, so moving the parameter there is natural.
Oversight in cd91de0.
Reported-by: Justin Pryzby
Author: Euler Taveira
Discussion: https://postgr.es/m/20210612004347.GP16435@telsasoft.com
LLVM 13 (due out in September) has changed the semantics of
LLVMOrcAbsoluteSymbols(), so we need to bump some reference counts to
avoid a double-free that causes crashes and bad query results.
A proactive change seems necessary to avoid having a window of time
where our respective latest releases would interact badly. It's
possible that the situation could change before then, though.
Thanks to Fabien Coelho for monitoring bleeding edge LLVM and Andres
Freund for tracking down the change.
Back-patch to 11, where the JIT code arrived.
Discussion: https://postgr.es/m/CA%2BhUKGLEy8mgtN7BNp0ooFAjUedDTJj5dME7NxLU-m91b85siA%40mail.gmail.com
The logic checking for the format of per-thread logs used grep() with
directly "$re", which would cause the test to consider all the logs as
a match without caring about their format at all. Using "/$re/" makes
grep() perform a regex test, which is what we want here.
While on it, improve some of the tests to be more picky with the
patterns expected and add more comments to describe the tests.
Issue discovered while digging into a separate patch.
Author: Fabien Coelho, Michael Paquier
Discussion: https://postgr.es/m/YNPsPAUoVDCpPOGk@paquier.xyz
Backpatch-through: 11
Contrary to the comment here, POSIX does not guarantee atomicity of a
read(), if another process calls write() concurrently. Or at least Linux
does not. Add locking to load_relmap_file() to avoid the race condition.
Fixes bug #17064. Thanks to Alexander Lakhin for the report and test case.
Backpatch-through: 9.6, all supported versions.
Discussion: https://www.postgresql.org/message-id/17064-bb0d7904ef72add3@postgresql.org
For no obvious reason, isolationtester has always insisted that
session and step names be written with double quotes. This is
fairly tedious and does little for test readability, especially
since the names that people actually choose almost always look
like normal identifiers. Hence, let's tweak the lexer to allow
SQL-like identifiers not only double-quoted strings.
(They're SQL-like, not exactly SQL, because I didn't add any
case-folding logic. Also there's no provision for U&"..." names,
not that anyone's likely to care.)
There is one incompatibility introduced by this change: if you write
"foo""bar" with no space, that used to be taken as two identifiers,
but now it's just one identifier with an embedded quote mark.
I converted all the src/test/isolation/ specfiles to remove
unnecessary double quotes, but stopped there because my
eyes were glazing over already.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/759113.1623861959@sss.pgh.pa.us
Our uses of gss_display_status() and gss_display_name() assumed
that the gss_buffer_desc strings returned by those functions are
null-terminated. It appears that they generally are, given the
lack of field complaints up to now. However, the available
documentation does not promise this, and some man pages
for gss_display_status() show examples that rely on the
gss_buffer_desc.length field instead of expecting null
termination. Also, we now have a report that on some
implementations, clang's address sanitizer is of the opinion
that the byte after the specified length is undefined.
Hence, change the code to rely on the length field instead.
This might well be cosmetic rather than fixing any real bug, but
it's hard to be sure, so back-patch to all supported branches.
While here, also back-patch the v12 changes that made pg_GSS_error
deal honestly with multiple messages available from
gss_display_status.
Per report from Sudheer H R.
Discussion: https://postgr.es/m/5372B6D4-8276-42C0-B8FB-BD0918826FC3@tekenlight.com
Previously, isolationtester displayed SQL query results using some
ad-hoc code that clearly hadn't had much effort expended on it.
Field values longer than 14 characters weren't separated from
the next field, and usually caused misalignment of the columns
too. Also there was no visual separation of a query's result
from subsequent isolationtester output. This made test result
files confusing and hard to read.
To improve matters, let's use libpq's PQprint() function. Although
that's long since unused by psql, it's still plenty good enough
for the purpose here.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/582362.1623798221@sss.pgh.pa.us
The code to signal a running walsender when its reserved WAL size grows
too large is completely uncovered before this commit; this adds coverage
for that case.
This test involves sending SIGSTOP to walsender and walreceiver, then
advancing enough WAL for a checkpoint to trigger, then sending SIGCONT.
There's no precedent for STOP signalling in Perl tests, and my reading
of relevant manpages says it's likely to fail on Windows. Because of
this, this test is always skipped on that platform.
This version fixes a couple of rarely hit race conditions in the
previous attempt 09126984a263; most notably, both LOG string searches
are loops, not just the second one; we acquire the start-of-log position
before STOP-signalling; and reference the correct process name in the
test description. All per Tom Lane.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202106102202.mjw4huiix7lo@alvherre.pgsql
We've long contended with isolation test results that aren't entirely
stable. Some test scripts insert long delays to try to force stable
results, which is not terribly desirable; but other erratic failure
modes remain, causing unrepeatable buildfarm failures. I've spent a
fair amount of time trying to solve this by improving the server-side
support code, without much success: that way is fundamentally unable
to cope with diffs that stem from chance ordering of arrival of
messages from different server processes.
We can improve matters on the client side, however, by annotating
the test scripts themselves to show the desired reporting order
of events that might occur in different orders. This patch adds
three types of annotations to deal with (a) test steps that might or
might not complete their waits before the isolationtester can see them
waiting; (b) test steps in different sessions that can legitimately
complete in either order; and (c) NOTIFY messages that might arrive
before or after the completion of a step in another session. We might
need more annotation types later, but this seems to be enough to deal
with the instabilities we've seen in the buildfarm. It also lets us
get rid of all the long delays that were previously used, cutting more
than a minute off the runtime of the isolation tests.
Back-patch to all supported branches, because the buildfarm
instabilities affect all the branches, and because it seems desirable
to keep isolationtester's capabilities the same across all branches
to simplify possible future back-patching of tests.
Discussion: https://postgr.es/m/327948.1623725828@sss.pgh.pa.us
Commits 84f5c2908 et al missed the need to cover plpgsql's "simple
expression" code path. If the first thing we execute after a
COMMIT/ROLLBACK is one of those, rather than a full-fledged SPI command,
we must explicitly do EnsurePortalSnapshotExists() to make sure we have
an outer snapshot. Note that it wouldn't be good enough to just push a
snapshot for the duration of the expression execution: what comes back
might be toasted, so we'd better have a snapshot protecting it.
The test case demonstrating this fact cheats a bit by marking a SQL
function immutable even though it fetches from a table. That's
nothing that users haven't been seen to do, though.
Per report from Jim Nasby. Back-patch to v11, like the previous fix.
Discussion: https://postgr.es/m/378885e4-f85f-fc28-6c91-c4d1c080bf26@amazon.com
Add a .git-blame-ignore-revs file with a list of pgindent, pgperlyidy,
and reformat-dat-files commit hashes. Postgres hackers that configure
git to use the ignore file will get git-blame output that avoids
attributing line changes to the ignored indent commits. This makes
git-blame output much easier to work with in practice.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAH2-Wz=cVh3GHTP6SdLU-Gnmt2zRdF8vZkcrFdSzXQ=WhbWm9Q@mail.gmail.com
In dc7420c2c9 I (Andres) accidentally used
RelationIsAccessibleInLogicalDecoding() as the sole condition to use the
non-shared catalog horizon in GetOldestNonRemovableTransactionId(). That is
incorrect, as RelationIsAccessibleInLogicalDecoding() checks whether wal_level
is logical.
The correct check, as done e.g. in GlobalVisTestFor(), is to check
IsCatalogRelation() and RelationIsAccessibleInLogicalDecoding().
The observed misbehavior of this bug was that there could be an endless loop
in lazy_scan_prune(), because the horizons used in heap_page_prune() and the
individual tuple liveliness checks did not match. Likely there are other
potential consequences as well.
A later commit will unify the determination which horizon has to be used, and
add additional assertions to make it easier to catch a bug like this.
Reported-By: Justin Pryzby <pryzby@telsasoft.com>
Diagnosed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAEze2Wg32Y9+WJfw=aofkRx1ZRFt_Ev6bNPc4PSaz7PjSFtZgQ@mail.gmail.com
linitial_node() fails in assert enabled builds if the given pointer is
not of the specified type. Here the type is IntList. The code thought
it should be expecting List, but it was wrong.
In the existing tests which run this code the initial list element is
always NIL. Since linitial_node() allows NULL, we didn't trigger any
assert failures in the existing regression tests.
There is still some discussion as to whether we need a few more tests in
this area, but for now, since beta2 is looming, fix the bug first.
Bug: #17067
Discussion: https://postgr.es/m/17067-665d50fa321f79e0@postgresql.org
Reported-by: Yaoguang Chen
The failsafe can trigger when index processing is already disabled.
This can happen when VACUUM's INDEX_CLEANUP parameter is "off" and the
failsafe happens to trigger. Remove assertions that assume that index
processing is directly tied to the failsafe.
Oversight in commit c242baa4, which made it possible for the failsafe to
trigger in a two-pass strategy VACUUM that has yet to make its first
call to lazy_vacuum_all_indexes().
This reverts commit 09126984a263; the test case added there failed once
in circumstances that remain mysterious. It seems better to remove the
test for now so that 14beta2 doesn't have random failures built in.
We had a request to provide a way to test at compile time for the
availability of the new pipeline features. More generally, it
seems like a good idea to provide a way to test via #ifdef for
all new libpq API features. People have been using the version
from pg_config.h for that; but that's more likely to represent the
server version than the libpq version, in the increasingly-common
scenario where they're different. It's safer if libpq-fe.h itself
is the source of truth about what features it offers.
Hence, establish a policy that starting in v14 we'll add a suitable
feature-is-present macro to libpq-fe.h when we add new API there.
(There doesn't seem to be much point in applying this policy
retroactively, but it's not too late for v14.)
Tom Lane and Alvaro Herrera, per suggestion from Boris Kolpackov.
Discussion: https://postgr.es/m/boris.20210617102439@codesynthesis.com
Generalize the INDEX_CLEANUP VACUUM parameter (and the corresponding
reloption): make it into a ternary style boolean parameter. It now
exposes a third option, "auto". The "auto" option (which is now the
default) enables the "bypass index vacuuming" optimization added by
commit 1e55e7d1.
"VACUUM (INDEX_CLEANUP TRUE)" is redefined to once again make VACUUM
simply do any required index vacuuming, regardless of how few dead
tuples are encountered during the first scan of the target heap relation
(unless there are exactly zero). This gives users a way of opting out
of the "bypass index vacuuming" optimization, if for whatever reason
that proves necessary. It is also expected to be used by PostgreSQL
developers as a testing option from time to time.
"VACUUM (INDEX_CLEANUP FALSE)" does the same thing as it always has: it
forcibly disables both index vacuuming and index cleanup. It's not
expected to be used much in PostgreSQL 14. The failsafe mechanism added
by commit 1e55e7d1 addresses the same problem in a simpler way.
INDEX_CLEANUP can now be thought of as a testing and compatibility
option.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAH2-WznrBoCST4_Gxh_G9hA8NzGUbeBGnOUC8FcXcrhqsv6OHQ@mail.gmail.com
The code to signal a running walsender when its reserved WAL size grows
too large is completely uncovered before this commit; this adds coverage
for that case.
This test involves sending SIGSTOP to walsender and walreceiver and
running a checkpoint while advancing WAL, then sending SIGCONT. There's
no precedent for this coding in Perl tests, and my reading of relevant
manpages says it's likely to fail on Windows. Because of this, this
test is always skipped on that platform.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202106102202.mjw4huiix7lo@alvherre.pgsql
Ordinarily, a pg_policy.polroles array wouldn't list the same role
more than once; but CREATE POLICY does not prevent that. If we
perform DROP OWNED BY on a role that is listed more than once,
RemoveRoleFromObjectPolicy either suffered an assertion failure
or encountered a tuple-updated-by-self error. Rewrite it to cope
correctly with duplicate entries, and add a CommandCounterIncrement
call to prevent the other problem.
Per discussion, there's other cleanup that ought to happen here,
but this seems like the minimum essential fix.
Per bug #17062 from Alexander Lakhin. It's been broken all along,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17062-11f471ae3199ca23@postgresql.org
Commit 547f04e73 caused pgbench to start printing its version number,
which seems like a fine idea, but it needs a bit more work:
* Print the server version number too, when different.
* Print the PG_VERSION string, not some reconstructed approximation.
This patch copies psql's well-tested code for the same purpose.
Discussion: https://postgr.es/m/1226654.1624036821@sss.pgh.pa.us
In the "simple Query" code path, it's fine for parse analysis or
execution of a utility statement to scribble on the statement's node
tree, since that'll just be thrown away afterwards. However it's
not fine if the node tree is in the plan cache, as then it'd be
corrupted for subsequent executions. Up to now we've dealt with
that by having individual utility-statement functions apply
copyObject() if they were going to modify the tree. But that's
prone to errors of omission. Bug #17053 from Charles Samborski
shows that CREATE/ALTER DOMAIN didn't get this memo, and can
crash if executed repeatedly from plan cache.
In the back branches, we'll just apply a narrow band-aid for that,
but in HEAD it seems prudent to have a more principled fix that
will close off the possibility of other similar bugs in future.
Hence, let's hoist the responsibility for doing copyObject up into
ProcessUtility from its children, thus ensuring that it happens for
all utility statement types.
Also, modify ProcessUtility's API so that its callers can tell it
whether a copy step is necessary. It turns out that in all cases,
the immediate caller knows whether the node tree is transient, so
this doesn't involve a huge amount of code thrashing. In this way,
while we lose a little bit in the execute-from-cache code path due
to sometimes copying node trees that wouldn't be mutated anyway,
we gain something in the simple-Query code path by not copying
throwaway node trees. Statements that are complex enough to be
expensive to copy are almost certainly ones that would have to be
copied anyway, so the loss in the cache code path shouldn't be much.
(Note that this whole problem applies only to utility statements.
Optimizable statements don't have the issue because we long ago made
the executor treat Plan trees as read-only. Perhaps someday we will
make utility statement execution act likewise, but I'm not holding
my breath.)
Discussion: https://postgr.es/m/931771.1623893989@sss.pgh.pa.us
Discussion: https://postgr.es/m/17053-3ca3f501bbc212b4@postgresql.org
The fast default code added in Release 11 omitted to check that the
table a fast default was being added to was a plain table. Thus one
could be added to a foreign table, which predicably blows up. Here we
perform that check.
In addition, on the back branches, since some of these might have
escaped into the wild, if we encounter a missing value for
an attribute of something other than a plain table we ignore it.
Fixes bug #17056
Backpatch to release 11,
Reviewed by: Andres Freund, Álvaro Herrera and Tom Lane