Previously, we used to use the array of size max_replication_slots to
store stats for replication slots. But that had two problems in the cases
where a message for dropping a slot gets lost: 1) the stats for the new
slot are not recorded if the array is full and 2) writing beyond the end
of the array if the user reduces the max_replication_slots.
This commit uses HTAB for replication slot statistics, resolving both
problems. Now, pgstat_vacuum_stat() search for all the dead replication
slots in stats hashtable and tell the collector to remove them. To avoid
showing the stats for the already-dropped slots, pg_stat_replication_slots
view searches slot stats by the slot name taken from pg_replication_slots.
Also, we send a message for creating a slot at slot creation, initializing
the stats. This reduces the possibility that the stats are accumulated
into the old slot stats when a message for dropping a slot gets lost.
Reported-by: Andres Freund
Author: Sawada Masahiko, test case by Vignesh C
Reviewed-by: Amit Kapila, Vignesh C, Dilip Kumar
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
This isn't strictly necessary, but in theory it might matter if in the
future the width of the nbtree special area changes -- its total size
might not be an even number of MAXALIGN() quantums, even with padding.
PageInit() MAXALIGN()s all special area offsets, but amcheck uses the
offset to perform initial basic validation of line pointers, so we don't
rely on the offset from the page header.
The real reason to do this is to set a good example for new code that
adds amcheck coverage for other index AMs.
Reported-By: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CALj2ACUMqTR9nErh99FbOBmzCXE9=gXNqhBiwYOhejJJS1LXqQ@mail.gmail.com
This is cleanup for commit 27e1f1456:
* ExecAppendAsyncEventWait(), which was modified a bit further by commit
a8af856d3, duplicated the same nevents calculation. Simplify the code
a little bit to avoid the duplication. Update comments there.
* Add an assertion to ExecAppendAsyncRequest().
* Update a comment about merging the async_capable options from input
relations in merge_fdw_options(), per complaint from Kyotaro Horiguchi.
* Add a comment for fetch_more_data_begin().
Author: Etsuro Fujita
Discussion: https://postgr.es/m/CAPmGK1637W30Wx3MnrReewhafn6F_0J76mrJGoFXFnpPq4QfvA%40mail.gmail.com
In the new test after resetting the stats, we were not waiting for the
stats message to be delivered. Also, we need to decode the results for
the new test, otherwise, it will show the old stats.
In passing,
a. Change docs added by commit f5fc2f5b23 as per suggestion by
Justin Pryzby.
b. Bump the PGSTAT_FILE_FORMAT_ID as commit f5fc2f5b23 changes the file
format of stats.
Reported-by: Tom Lane based on buildfarm reports
Author: Vignesh C, Justin Pryzby
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
A couple of tests have been using 0 as magic constant while SEEK_SET can
be used instead. This makes the code easier to understand, and more
consistent with the changes done in 3c5b068.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YHrc24AgJQ6tQ1q0@paquier.xyz
This adds the statistics about total transactions count and total
transaction data logically sent to the decoding output plugin from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats.
Suggested-by: Andres Freund
Author: Vignesh C and Amit Kapila
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
We don't need to mention the attribute number in these messages, because
there's a dedicated column for that, but we should mention the toast
value ID, because that's really useful for any follow-up troubleshooting
the user wants to do. This also rewords some of the messages to hopefully
read a little better.
Also, use VARATT_EXTERNAL_GET_POINTER in case we're accessing a TOAST
pointer that isn't aligned on a platform that's fussy about alignment,
so that we don't crash while corruption-checking the user's data.
Mark Dilger, reviewed by me.
Discussion: http://postgr.es/m/7D3B9BF6-50D0-4C30-8506-1C1851C7F96F@enterprisedb.com
The tests introduced in 32a9c0b for connections broken and
re-established rely on pg_terminate_backend() for their logic. When
these were introduced, this function simply sent a signal to a backend
without waiting for the operation to complete, and the tests repeatedly
looked at pg_stat_activity to check if the operation was completed or
not. Since aaf0432, it is possible to define a timeout to make
pg_terminate_backend() wait for a certain duration, so make use of it,
with a timeout reasonably large enough (3min) to give enough room for
the tests to pass even on slow machines.
Some measurements show that the tests of postgres_fdw are much faster
with this change. For example, on my laptop, they now take 4s instead
of 6s.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACXGY_EfGrMTjKjHy2zi-u1u9rdeioU_fro0T6Jo8t56KQ@mail.gmail.com
Ignore parallel workers in pg_stat_statements
Oversight in 4f0b0966c8 which exposed queryid in parallel workers.
Counters are aggregated by the main backend process so parallel workers
would report duplicated activity, and could also report activity for the
wrong entry as they are only aware of the top level queryid.
Fix thinko in pg_stat_get_activity when retrieving the queryid.
Remove unnecessary call to pgstat_report_queryid().
Reported-by: Amit Kapila, Andres Freund, Thomas Munro
Discussion: https://postgr.es/m/20210408051735.lfbdzun5zdlax5gd@alap3.anarazel.dep634GTSOqnDW86Owrn6qDAVosC5dJjXjp7BMfc5Gz1Q@mail.gmail.com
Author: Julien Rouhaud
This commit introduces new foreign data wrapper API for TRUNCATE.
It extends TRUNCATE command so that it accepts foreign tables as
the targets to truncate and invokes that API. Also it extends postgres_fdw
so that it can issue TRUNCATE command to foreign servers, by adding
new routine for that TRUNCATE API.
The information about options specified in TRUNCATE command, e.g.,
ONLY, CACADE, etc is passed to FDW via API. The list of foreign tables to
truncate is also passed to FDW. FDW truncates the foreign data sources
that the passed foreign tables specify, based on those information.
For example, postgres_fdw constructs TRUNCATE command using them
and issues it to the foreign server.
For performance, TRUNCATE command invokes the FDW routine for
TRUNCATE once per foreign server that foreign tables to truncate belong to.
Author: Kazutaka Onishi, Kohei KaiGai, slightly modified by Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier, Zhihong Yu, Alvaro Herrera, Stephen Frost, Ashutosh Bapat, Amit Langote, Daniel Gustafsson, Ibrar Ahmed, Fujii Masao
Discussion: https://postgr.es/m/CAOP8fzb_gkReLput7OvOK+8NHgw-RKqNv59vem7=524krQTcWA@mail.gmail.com
Discussion: https://postgr.es/m/CAJuF6cMWDDqU-vn_knZgma+2GMaout68YUgn1uyDnexRhqqM5Q@mail.gmail.com
Changing pg_stat_statements.track between 'all' and 'top' would control
if pg_stat_statements tracked just top level statements or also
statements inside functions, but when tracking all it would not
differentiate between the two. Being table to differentiate this is
useful both to track where the actual query is coming from, and to see
if there are differences in executions between the two.
To do this, add a boolean to the hash key indicating if the statement
was top level or not.
Experience from the pg_stat_kcache module shows that in at least some
"reasonable worloads" only <5% of the queries show up both top level and
nested. Based on this, admittedly small, dataset, this patch does not
try to de-duplicate those query *texts*, and will just store one copy
for the top level and one for the nested.
Author: Julien Rohaud
Reviewed-By: Magnus Hagander, Masahiro Ikeda
Discussion: https://postgr.es/m/20201202040516.GA43757@nol
Use the in-core query id computation for pg_stat_activity,
log_line_prefix, and EXPLAIN VERBOSE.
Similar to other fields in pg_stat_activity, only the queryid from the
top level statements are exposed, and if the backends status isn't
active then the queryid from the last executed statements is displayed.
Add a %Q placeholder to include the queryid in log_line_prefix, which
will also only expose top level statements.
For EXPLAIN VERBOSE, if a query identifier has been computed, either by
enabling compute_query_id or using a third-party module, display it.
Bump catalog version.
Discussion: https://postgr.es/m/20210407125726.tkvjdbw76hxnpwfi@nol
Author: Julien Rouhaud
Reviewed-by: Alvaro Herrera, Nitin Jadhav, Zhihong Yu
First, don't perform database access while holding a buffer lock.
When checking a heap, we can validate that TOAST pointers are sane by
performing a scan on the TOAST index and looking up the chunks that
correspond to each value ID that appears in a TOAST poiner in the main
table. But, to do that while holding a buffer lock at least risks
causing other backends to wait uninterruptibly, and probably can cause
undetected and uninterruptible deadlocks. So, instead, make a list of
checks to perform while holding the lock, and then perform the checks
after releasing it.
Second, adjust things so that we don't try to follow TOAST pointers
for tuples that are already eligible to be pruned. The TOAST tuples
become eligible for pruning at the same time that the main tuple does,
so trying to check them may lead to spurious reports of corruption,
as observed in the buildfarm. The necessary infrastructure to decide
whether or not the tuple being checked is prunable was added by
commit 3b6c1259f9, but it wasn't
actually used for its intended purpose prior to this patch.
Mark Dilger, adjusted by me to avoid a memory leak.
Discussion: http://postgr.es/m/AC5479E4-6321-473D-AC92-5EC36299FBC2@enterprisedb.com
Add compute_query_id GUC to control whether a query identifier should be
computed by the core (off by default). It's thefore now possible to
disable core queryid computation and use pg_stat_statements with a
different algorithm to compute the query identifier by using a
third-party module.
To ensure that a single source of query identifier can be used and is
well defined, modules that calculate a query identifier should throw an
error if compute_query_id specified to compute a query id and if a query
idenfitier was already calculated.
Discussion: https://postgr.es/m/20210407125726.tkvjdbw76hxnpwfi@nol
Author: Julien Rouhaud
Reviewed-by: Alvaro Herrera, Nitin Jadhav, Zhihong Yu
Commit 3b6c1259f9 resulted in the same
xmin and xmax bounds checking being performed in both check_tuple()
and check_tuple_visibility(). Remove the duplication.
While at it, adjust some code comments that were overlooked in that
commit.
Mark Dilger
Discussion: http://postgr.es/m/AC5479E4-6321-473D-AC92-5EC36299FBC2@enterprisedb.com
By default, have libpq set the TLS extension "Server Name Indication" (SNI).
This allows an SNI-aware SSL proxy to route connections. (This
requires a proxy that is aware of the PostgreSQL protocol, not just
any SSL proxy.)
In the future, this could also allow the server to use different SSL
certificates for different host specifications. (That would require
new server functionality. This would be the client-side functionality
for that.)
Since SNI makes the host name appear in cleartext in the network
traffic, this might be undesirable in some cases. Therefore, also add
a libpq connection option "sslsni" to turn it off.
Discussion: https://www.postgresql.org/message-id/flat/7289d5eb-62a5-a732-c3b9-438cee2cb709%40enterprisedb.com
This reverts commit 9f984ba6d2.
It was making the buildfarm unhappy, apparently setting client_min_messages
in a regression test produces different output if log_statement='all'.
Another issue is that I now suspect the bit sortsupport function was in
fact not correct to call byteacmp(). Revert to investigate both of those
issues.
Bloom, GIN, GiST and SP-GiST rely on PageInit() to initialize the
contents of a page, and this routine fills entirely a page with zeros
for a size of BLCKSZ, including the special space. Those index AMs have
been using an extra memset() call to fill with zeros the special page
space, or even the whole page, which is not necessary as PageInit()
already does this work, so let's remove them. GiST was not doing this
extra call, but has commented out a system call that did so since
6236991.
While on it, remove one MAXALIGN() for SP-GiST as PageInit() takes care
of that. This makes the whole page initialization logic more consistent
across all index AMs.
Author: Bharath Rupireddy
Reviewed-by: Vignesh C, Mahendra Singh Thalor
Discussion: https://postgr.es/m/CALj2ACViOo2qyaPT7krWm4LRyRTw9kOXt+g6PfNmYuGA=YHj9A@mail.gmail.com
Commit f49bcd4ef3 disallowed postgres_fdw to import table partitions.
Because all data can be accessed through the partitioned table which
is the root of the partitioning hierarchy, importing only partitioned
table should allow access to all the data without creating extra objects.
This is a reasonable default when importing a whole schema. But there
may be the case where users want to explicitly import one of
a partitioned tables' partitions.
For that use case, this commit allows postgres_fdw to import tables or
foreign tables which are partitions of some other table only when they
are explicitly specified in LIMIT TO clause. It doesn't change
the behavior that any partitions not specified in LIMIT TO are
automatically excluded in IMPORT FOREIGN SCHEMA command.
Author: Matthias van de Meent
Reviewed-by: Bernd Helmle, Amit Langote, Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/CAEze2Whwg4i=mzApMe+PXxCEfgoZmHGqdqQFW7J4bmj_5p6t1A@mail.gmail.com
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
This commit adds a new option keep_connections that controls
whether postgres_fdw keeps the connections to the foreign server open
so that the subsequent queries can re-use them. This option can only be
specified for a foreign server. The default is on. If set to off,
all connections to the foreign server will be discarded
at the end of transaction. Closed connections will be re-established
when they are necessary by future queries using a foreign table.
This option is useful, for example, when users want to prevent
the connections from eating up the foreign servers connections
capacity.
Author: Bharath Rupireddy
Reviewed-by: Alexey Kondratov, Vignesh C, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVvrp5=AVp2PupEm+nAC8S4buqR3fJMmaCoc7ftT0aD2A@mail.gmail.com
Here we add a new executor node type named "Result Cache". The planner
can include this node type in the plan to have the executor cache the
results from the inner side of parameterized nested loop joins. This
allows caching of tuples for sets of parameters so that in the event that
the node sees the same parameter values again, it can just return the
cached tuples instead of rescanning the inner side of the join all over
again. Internally, result cache uses a hash table in order to quickly
find tuples that have been previously cached.
For certain data sets, this can significantly improve the performance of
joins. The best cases for using this new node type are for join problems
where a large portion of the tuples from the inner side of the join have
no join partner on the outer side of the join. In such cases, hash join
would have to hash values that are never looked up, thus bloating the hash
table and possibly causing it to multi-batch. Merge joins would have to
skip over all of the unmatched rows. If we use a nested loop join with a
result cache, then we only cache tuples that have at least one join
partner on the outer side of the join. The benefits of using a
parameterized nested loop with a result cache increase when there are
fewer distinct values being looked up and the number of lookups of each
value is large. Also, hash probes to lookup the cache can be much faster
than the hash probe in a hash join as it's common that the result cache's
hash table is much smaller than the hash join's due to result cache only
caching useful tuples rather than all tuples from the inner side of the
join. This variation in hash probe performance is more significant when
the hash join's hash table no longer fits into the CPU's L3 cache, but the
result cache's hash table does. The apparent "random" access of hash
buckets with each hash probe can cause a poor L3 cache hit ratio for large
hash tables. Smaller hash tables generally perform better.
The hash table used for the cache limits itself to not exceeding work_mem
* hash_mem_multiplier in size. We maintain a dlist of keys for this cache
and when we're adding new tuples and realize we've exceeded the memory
budget, we evict cache entries starting with the least recently used ones
until we have enough memory to add the new tuples to the cache.
For parameterized nested loop joins, we now consider using one of these
result cache nodes in between the nested loop node and its inner node. We
determine when this might be useful based on cost, which is primarily
driven off of what the expected cache hit ratio will be. Estimating the
cache hit ratio relies on having good distinct estimates on the nested
loop's parameters.
For now, the planner will only consider using a result cache for
parameterized nested loop joins. This works for both normal joins and
also for LATERAL type joins to subqueries. It is possible to use this new
node for other uses in the future. For example, to cache results from
correlated subqueries. However, that's not done here due to some
difficulties obtaining a distinct estimation on the outer plan to
calculate the estimated cache hit ratio. Currently we plan the inner plan
before planning the outer plan so there is no good way to know if a result
cache would be useful or not since we can't estimate the number of times
the subplan will be called until the outer plan is generated.
The functionality being added here is newly introducing a dependency on
the return value of estimate_num_groups() during the join search.
Previously, during the join search, we only ever needed to perform
selectivity estimations. With this commit, we need to use
estimate_num_groups() in order to estimate what the hit ratio on the
result cache will be. In simple terms, if we expect 10 distinct values
and we expect 1000 outer rows, then we'll estimate the hit ratio to be
99%. Since cache hits are very cheap compared to scanning the underlying
nodes on the inner side of the nested loop join, then this will
significantly reduce the planner's cost for the join. However, it's
fairly easy to see here that things will go bad when estimate_num_groups()
incorrectly returns a value that's significantly lower than the actual
number of distinct values. If this happens then that may cause us to make
use of a nested loop join with a result cache instead of some other join
type, such as a merge or hash join. Our distinct estimations have been
known to be a source of trouble in the past, so the extra reliance on them
here could cause the planner to choose slower plans than it did previous
to having this feature. Distinct estimations are also fairly hard to
estimate accurately when several tables have been joined already or when a
WHERE clause filters out a set of values that are correlated to the
expressions we're estimating the number of distinct value for.
For now, the costing we perform during query planning for result caches
does put quite a bit of faith in the distinct estimations being accurate.
When these are accurate then we should generally see faster execution
times for plans containing a result cache. However, in the real world, we
may find that we need to either change the costings to put less trust in
the distinct estimations being accurate or perhaps even disable this
feature by default. There's always an element of risk when we teach the
query planner to do new tricks that it decides to use that new trick at
the wrong time and causes a regression. Users may opt to get the old
behavior by turning the feature off using the enable_resultcache GUC.
Currently, this is enabled by default. It remains to be seen if we'll
maintain that setting for the release.
Additionally, the name "Result Cache" is the best name I could think of
for this new node at the time I started writing the patch. Nobody seems
to strongly dislike the name. A few people did suggest other names but no
other name seemed to dominate in the brief discussion that there was about
names. Let's allow the beta period to see if the current name pleases
enough people. If there's some consensus on a better name, then we can
change it before the release. Please see the 2nd discussion link below
for the discussion on the "Result Cache" name.
Author: David Rowley
Reviewed-by: Andy Fan, Justin Pryzby, Zhihong Yu, Hou Zhijie
Tested-By: Konstantin Knizhnik
Discussion: https://postgr.es/m/CAApHDvrPcQyQdWERGYWx8J%2B2DLUNgXu%2BfOSbQ1UscxrunyXyrQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvq=yQXr5kqhRviT2RhNKwToaWr9JAN5t+5_PzhuRJ3wvg@mail.gmail.com
This removes "Add Result Cache executor node". It seems that something
weird is going on with the tracking of cache hits and misses as
highlighted by many buildfarm animals. It's not yet clear what the
problem is as other parts of the plan indicate that the cache did work
correctly, it's just the hits and misses that were being reported as 0.
This is especially a bad time to have the buildfarm so broken, so
reverting before too many more animals go red.
Discussion: https://postgr.es/m/CAApHDvq_hydhfovm4=izgWs+C5HqEeRScjMbOgbpC-jRAeK3Yw@mail.gmail.com
Here we add a new executor node type named "Result Cache". The planner
can include this node type in the plan to have the executor cache the
results from the inner side of parameterized nested loop joins. This
allows caching of tuples for sets of parameters so that in the event that
the node sees the same parameter values again, it can just return the
cached tuples instead of rescanning the inner side of the join all over
again. Internally, result cache uses a hash table in order to quickly
find tuples that have been previously cached.
For certain data sets, this can significantly improve the performance of
joins. The best cases for using this new node type are for join problems
where a large portion of the tuples from the inner side of the join have
no join partner on the outer side of the join. In such cases, hash join
would have to hash values that are never looked up, thus bloating the hash
table and possibly causing it to multi-batch. Merge joins would have to
skip over all of the unmatched rows. If we use a nested loop join with a
result cache, then we only cache tuples that have at least one join
partner on the outer side of the join. The benefits of using a
parameterized nested loop with a result cache increase when there are
fewer distinct values being looked up and the number of lookups of each
value is large. Also, hash probes to lookup the cache can be much faster
than the hash probe in a hash join as it's common that the result cache's
hash table is much smaller than the hash join's due to result cache only
caching useful tuples rather than all tuples from the inner side of the
join. This variation in hash probe performance is more significant when
the hash join's hash table no longer fits into the CPU's L3 cache, but the
result cache's hash table does. The apparent "random" access of hash
buckets with each hash probe can cause a poor L3 cache hit ratio for large
hash tables. Smaller hash tables generally perform better.
The hash table used for the cache limits itself to not exceeding work_mem
* hash_mem_multiplier in size. We maintain a dlist of keys for this cache
and when we're adding new tuples and realize we've exceeded the memory
budget, we evict cache entries starting with the least recently used ones
until we have enough memory to add the new tuples to the cache.
For parameterized nested loop joins, we now consider using one of these
result cache nodes in between the nested loop node and its inner node. We
determine when this might be useful based on cost, which is primarily
driven off of what the expected cache hit ratio will be. Estimating the
cache hit ratio relies on having good distinct estimates on the nested
loop's parameters.
For now, the planner will only consider using a result cache for
parameterized nested loop joins. This works for both normal joins and
also for LATERAL type joins to subqueries. It is possible to use this new
node for other uses in the future. For example, to cache results from
correlated subqueries. However, that's not done here due to some
difficulties obtaining a distinct estimation on the outer plan to
calculate the estimated cache hit ratio. Currently we plan the inner plan
before planning the outer plan so there is no good way to know if a result
cache would be useful or not since we can't estimate the number of times
the subplan will be called until the outer plan is generated.
The functionality being added here is newly introducing a dependency on
the return value of estimate_num_groups() during the join search.
Previously, during the join search, we only ever needed to perform
selectivity estimations. With this commit, we need to use
estimate_num_groups() in order to estimate what the hit ratio on the
result cache will be. In simple terms, if we expect 10 distinct values
and we expect 1000 outer rows, then we'll estimate the hit ratio to be
99%. Since cache hits are very cheap compared to scanning the underlying
nodes on the inner side of the nested loop join, then this will
significantly reduce the planner's cost for the join. However, it's
fairly easy to see here that things will go bad when estimate_num_groups()
incorrectly returns a value that's significantly lower than the actual
number of distinct values. If this happens then that may cause us to make
use of a nested loop join with a result cache instead of some other join
type, such as a merge or hash join. Our distinct estimations have been
known to be a source of trouble in the past, so the extra reliance on them
here could cause the planner to choose slower plans than it did previous
to having this feature. Distinct estimations are also fairly hard to
estimate accurately when several tables have been joined already or when a
WHERE clause filters out a set of values that are correlated to the
expressions we're estimating the number of distinct value for.
For now, the costing we perform during query planning for result caches
does put quite a bit of faith in the distinct estimations being accurate.
When these are accurate then we should generally see faster execution
times for plans containing a result cache. However, in the real world, we
may find that we need to either change the costings to put less trust in
the distinct estimations being accurate or perhaps even disable this
feature by default. There's always an element of risk when we teach the
query planner to do new tricks that it decides to use that new trick at
the wrong time and causes a regression. Users may opt to get the old
behavior by turning the feature off using the enable_resultcache GUC.
Currently, this is enabled by default. It remains to be seen if we'll
maintain that setting for the release.
Additionally, the name "Result Cache" is the best name I could think of
for this new node at the time I started writing the patch. Nobody seems
to strongly dislike the name. A few people did suggest other names but no
other name seemed to dominate in the brief discussion that there was about
names. Let's allow the beta period to see if the current name pleases
enough people. If there's some consensus on a better name, then we can
change it before the release. Please see the 2nd discussion link below
for the discussion on the "Result Cache" name.
Author: David Rowley
Reviewed-by: Andy Fan, Justin Pryzby, Zhihong Yu
Tested-By: Konstantin Knizhnik
Discussion: https://postgr.es/m/CAApHDvrPcQyQdWERGYWx8J%2B2DLUNgXu%2BfOSbQ1UscxrunyXyrQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvq=yQXr5kqhRviT2RhNKwToaWr9JAN5t+5_PzhuRJ3wvg@mail.gmail.com
This patch makes two closely related sets of changes:
1. For UPDATE, the subplan of the ModifyTable node now only delivers
the new values of the changed columns (i.e., the expressions computed
in the query's SET clause) plus row identity information such as CTID.
ModifyTable must re-fetch the original tuple to merge in the old
values of any unchanged columns. The core advantage of this is that
the changed columns are uniform across all tables of an inherited or
partitioned target relation, whereas the other columns might not be.
A secondary advantage, when the UPDATE involves joins, is that less
data needs to pass through the plan tree. The disadvantage of course
is an extra fetch of each tuple to be updated. However, that seems to
be very nearly free in context; even worst-case tests don't show it to
add more than a couple percent to the total query cost. At some point
it might be interesting to combine the re-fetch with the tuple access
that ModifyTable must do anyway to mark the old tuple dead; but that
would require a good deal of refactoring and it seems it wouldn't buy
all that much, so this patch doesn't attempt it.
2. For inherited UPDATE/DELETE, instead of generating a separate
subplan for each target relation, we now generate a single subplan
that is just exactly like a SELECT's plan, then stick ModifyTable
on top of that. To let ModifyTable know which target relation a
given incoming row refers to, a tableoid junk column is added to
the row identity information. This gets rid of the horrid hack
that was inheritance_planner(), eliminating O(N^2) planning cost
and memory consumption in cases where there were many unprunable
target relations.
Point 2 of course requires point 1, so that there is a uniform
definition of the non-junk columns to be returned by the subplan.
We can't insist on uniform definition of the row identity junk
columns however, if we want to keep the ability to have both
plain and foreign tables in a partitioning hierarchy. Since
it wouldn't scale very far to have every child table have its
own row identity column, this patch includes provisions to merge
similar row identity columns into one column of the subplan result.
In particular, we can merge the whole-row Vars typically used as
row identity by FDWs into one column by pretending they are type
RECORD. (It's still okay for the actual composite Datums to be
labeled with the table's rowtype OID, though.)
There is more that can be done to file down residual inefficiencies
in this patch, but it seems to be committable now.
FDW authors should note several API changes:
* The argument list for AddForeignUpdateTargets() has changed, and so
has the method it must use for adding junk columns to the query. Call
add_row_identity_var() instead of manipulating the parse tree directly.
You might want to reconsider exactly what you're adding, too.
* PlanDirectModify() must now work a little harder to find the
ForeignScan plan node; if the foreign table is part of a partitioning
hierarchy then the ForeignScan might not be the direct child of
ModifyTable. See postgres_fdw for sample code.
* To check whether a relation is a target relation, it's no
longer sufficient to compare its relid to root->parse->resultRelation.
Instead, check it against all_result_relids or leaf_result_relids,
as appropriate.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqHpHdqdDn48yCEhynnniahH78rwcrv1rEX65-fsZGBOLQ@mail.gmail.com
This implements asynchronous execution, which runs multiple parts of a
non-parallel-aware Append concurrently rather than serially to improve
performance when possible. Currently, the only node type that can be
run concurrently is a ForeignScan that is an immediate child of such an
Append. In the case where such ForeignScans access data on different
remote servers, this would run those ForeignScans concurrently, and
overlap the remote operations to be performed simultaneously, so it'll
improve the performance especially when the operations involve
time-consuming ones such as remote join and remote aggregation.
We may extend this to other node types such as joins or aggregates over
ForeignScans in the future.
This also adds the support for postgres_fdw, which is enabled by the
table-level/server-level option "async_capable". The default is false.
Robert Haas, Kyotaro Horiguchi, Thomas Munro, and myself. This commit
is mostly based on the patch proposed by Robert Haas, but also uses
stuff from the patch proposed by Kyotaro Horiguchi and from the patch
proposed by Thomas Munro. Reviewed by Kyotaro Horiguchi, Konstantin
Knizhnik, Andrey Lepikhov, Movead Li, Thomas Munro, Justin Pryzby, and
others.
Discussion: https://postgr.es/m/CA%2BTgmoaXQEt4tZ03FtQhnzeDEMzBck%2BLrni0UWHVVgOTnA6C1w%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKGLBRyu0rHrDCMC4%3DRn3252gogyp1SjOgG8SEKKZv%3DFwfQ%40mail.gmail.com
Discussion: https://postgr.es/m/20200228.170650.667613673625155850.horikyota.ntt%40gmail.com
Here we add a new output parameter to estimate_num_groups() to allow it to
inform the caller of additional, possibly useful information about the
estimation.
The new output parameter is a struct that currently contains just a single
field with a set of flags. This was done rather than having the flags as
an output parameter to allow future fields to be added without having to
change the signature of the function at a later date when we want to pass
back further information that might not be suitable to store in the flags
field.
It seems reasonable that one day in the future that the planner would want
to know more about the estimation. For example, how many individual sets
of statistics was the estimation generated from? The planner may want to
take that into account if we ever want to consider risks as well as costs
when generating plans.
For now, there's only 1 flag we set in the flags field. This is to
indicate if the estimation fell back on using the hard-coded constants in
any part of the estimation. Callers may like to change their behavior if
this is set, and this gives them the ability to do so. Callers may pass
the flag pointer as NULL if they have no interest in obtaining any
additional information about the estimate.
We're not adding any actual usages of these flags here. Some follow-up
commits will make use of this feature. Additionally, we're also not
making any changes to add support for clauselist_selectivity() and
clauselist_selectivity_ext(). However, if this is required in the future
then the same struct being added here should be fine to use as a new
output argument for those functions too.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqQqpk=1W-G_ds7A9CsXX3BggWj_7okinzkLVhDubQzjA@mail.gmail.com
Along with gid, this provides a different way to identify the transaction.
The users that use xid in some way to prepare the transactions can use it
to filter prepare transactions. The later commands COMMIT PREPARED or
ROLLBACK PREPARED carries both identifiers, providing an output plugin the
choice of what to use.
Author: Markus Wanner
Reviewed-by: Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/ee280000-7355-c4dc-e47b-2436e7be959c@enterprisedb.com
This has previously not been a problem (that anyone ever reported),
but in future OpenSSL versions (3.0.0), where legacy ciphers are/can
be disabled, this is the place where this is reported. So we need to
catch the error here, otherwise the higher-level functions would
return garbage. The nearby encryption code already handled errors
similarly.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/9e9c431c-0adc-7a6d-9b1a-915de1ba3fe7@enterprisedb.com
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
When accessing replication slot stats, introduced in 9868167500,
pgstat_read_statsfiles() reads the data into newly allocated
memory. Unfortunately the current memory context at that point is the
callers, leading to leaks and use-after-free dangers.
The fix is trivial, explicitly use pgStatLocalContext. There's some
potential for further improvements, but that's outside of the scope of
this bugfix.
No backpatch necessary, feature is only in HEAD.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210317230447.c7uc4g3vbs4wi32i@alap3.anarazel.de
Empty sibling pages can occasionally be much more common than any other
event that we report on at elevel DEBUG1. Increase the elevel for
relevant cases to DEBUG2 to avoid overwhelming the user with relatively
insignificant details.
Don't complain about the last TOAST chunk number being different
from what we expected if there are no TOAST chunks at all.
In such a case, saying that the final chunk number is 0 is not
really accurate, and the fact the value is missing from the
TOAST table is reported separately anyway.
Mark Dilger
Discussion: http://postgr.es/m/AA5506CE-7D2A-42E4-A51D-358635E3722D@enterprisedb.com
This partially reverts 096bbf7 and 9d2d457, undoing the libpq changes as
it could cause breakages in distributions that share one single libpq
version across multiple major versions of Postgres for extensions and
applications linking to that.
Note that the backend is unchanged here, and it still disables SSL
compression while simplifying the underlying catalogs that tracked if
compression was enabled or not for a SSL connection.
Per discussion with Tom Lane and Daniel Gustafsson.
Discussion: https://postgr.es/m/YEbq15JKJwIX+S6m@paquier.xyz
Per buildfarm member crake, any servers including a postgres_fdw server
with this option set would fail to do a pg_upgrade properly as the
option got hidden in f9264d1 by becoming a debug option, making the
restore of the FDW server fail.
This changes back the option in libpq to be visible, but still inactive
to fix this upgrade issue.
Discussion: https://postgr.es/m/YEbq15JKJwIX+S6m@paquier.xyz
PostgreSQL disabled compression as of e3bdb2d and the documentation
recommends against using it since. Additionally, SSL compression has
been disabled in OpenSSL since version 1.1.0, and was disabled in many
distributions long before that. The most recent TLS version, TLSv1.3,
disallows compression at the protocol level.
This commit removes the feature itself, removing support for the libpq
parameter sslcompression (parameter still listed for compatibility
reasons with existing connection strings, just ignored), and removes
the equivalent field in pg_stat_ssl and de facto PgBackendSSLStatus.
Note that, on top of removing the ability to activate compression by
configuration, compression is actively disabled in both frontend and
backend to avoid overrides from local configurations.
A TAP test is added for deprecated SSL parameters to check after
backwards compatibility.
Bump catalog version.
Author: Daniel Gustafsson
Reviewed-by: Peter Eisentraut, Magnus Hagander, Michael Paquier
Discussion: https://postgr.es/m/7E384D48-11C5-441B-9EC3-F7DB1F8518F6@yesql.se
Since PG 8.2, @ and ~ have been deprecated aliases for the containment
operators @> and <@. It seems like enough time has passed to actually
remove them, so do so.
This completes the project begun in commit 2f70fdb06. Note that in
the core types, the relation to the preferred operator names was
reversed from what it is in these contrib modules. The confusion
that induced was a large part of the reason for deprecation.
Justin Pryzby
Discussion: https://postgr.es/m/20201027032511.GF9241@telsasoft.com
Commit 0aa8a01d04 extends the output plugin API to allow decoding of
prepared xacts and allowed the user to enable/disable the two-phase option
via pg_logical_slot_get_changes(). This can lead to a problem such that
the first time when it gets changes via pg_logical_slot_get_changes()
without two_phase option enabled it will not get the prepared even though
prepare is after consistent snapshot. Now next time during getting changes,
if the two_phase option is enabled it can skip prepare because by that
time start decoding point has been moved. So the user will only get commit
prepared.
Allow to enable/disable this option at the create slot time and default
will be false. It will break the existing slots which is fine in a major
release.
Author: Ajin Cherian
Reviewed-by: Amit Kapila and Vignesh C
Discussion: https://postgr.es/m/d0f60d60-133d-bf8d-bd70-47784d8fabf3@enterprisedb.com
In commit a271a1b50e, we allowed decoding at prepare time and the prepare
was decoded again if there is a restart after decoding it. It was done
that way because we can't distinguish between the cases where we have not
decoded the prepare because it was prior to consistent snapshot or we have
decoded it earlier but restarted. To distinguish between these two cases,
we have introduced an initial_consistent_point at the slot level which is
an LSN at which we found a consistent point at the time of slot creation.
This is also the point where we have exported a snapshot for the initial
copy. So, prepare transaction prior to this point are sent along with
commit prepared.
This commit bumps SNAPBUILD_VERSION because of change in SnapBuild. It
will break existing slots which is fine in a major release.
Author: Ajin Cherian, based on idea by Andres Freund
Reviewed-by: Amit Kapila and Vignesh C
Discussion: https://postgr.es/m/d0f60d60-133d-bf8d-bd70-47784d8fabf3@enterprisedb.com
Otherwise we risk "leaking" deleted pages by making them non-recyclable
indefinitely. Commit 6655a729 did the same thing for deleted pages in
GiST indexes. That work was used as a starting point here.
Stop storing an XID indicating the oldest bpto.xact across all deleted
though unrecycled pages in nbtree metapages. There is no longer any
reason to care about that condition/the oldest XID. It only ever made
sense when wraparound was something _bt_vacuum_needs_cleanup() had to
consider.
The btm_oldest_btpo_xact metapage field has been repurposed and renamed.
It is now btm_last_cleanup_num_delpages, which is used to remember how
many non-recycled deleted pages remain from the last VACUUM (in practice
its value is usually the precise number of pages that were _newly
deleted_ during the specific VACUUM operation that last set the field).
The general idea behind storing btm_last_cleanup_num_delpages is to use
it to give _some_ consideration to non-recycled deleted pages inside
_bt_vacuum_needs_cleanup() -- though never too much. We only really
need to avoid leaving a truly excessive number of deleted pages in an
unrecycled state forever. We only do this to cover certain narrow cases
where no other factor makes VACUUM do a full scan, and yet the index
continues to grow (and so actually misses out on recycling existing
deleted pages).
These metapage changes result in a clear user-visible benefit: We no
longer trigger full index scans during VACUUM operations solely due to
the presence of only 1 or 2 known deleted (though unrecycled) blocks
from a very large index. All that matters now is keeping the costs and
benefits in balance over time.
Fix an issue that has been around since commit 857f9c36, which added the
"skip full scan of index" mechanism (i.e. the _bt_vacuum_needs_cleanup()
logic). The accuracy of btm_last_cleanup_num_heap_tuples accidentally
hinged upon _when_ the source value gets stored. We now always store
btm_last_cleanup_num_heap_tuples in btvacuumcleanup(). This fixes the
issue because IndexVacuumInfo.num_heap_tuples (the source field) is
expected to accurately indicate the state of the table _after_ the
VACUUM completes inside btvacuumcleanup().
A backpatchable fix cannot easily be extracted from this commit. A
targeted fix for the issue will follow in a later commit, though that
won't happen today.
I (pgeoghegan) have chosen to remove any mention of deleted pages in the
documentation of the vacuum_cleanup_index_scale_factor GUC/param, since
the presence of deleted (though unrecycled) pages is no longer of much
concern to users. The vacuum_cleanup_index_scale_factor description in
the docs now seems rather unclear in any case, and it should probably be
rewritten in the near future. Perhaps some passing mention of page
deletion will be added back at the same time.
Bump XLOG_PAGE_MAGIC due to nbtree WAL records using full XIDs now.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX=d5u-tRYhi-F4wnV2uN2zHpMUXw@mail.gmail.com
Commit 866e24d47d added an assert that HEAP_XMAX_LOCK_ONLY and
HEAP_KEYS_UPDATED cannot appear together, on the faulty assumption that
the latter necessarily referred to an update and not a tuple lock; but
that's wrong, because SELECT FOR UPDATE can use precisely that
combination, as evidenced by the amcheck test case added here.
Remove the Assert(), and also patch amcheck's verify_heapam.c to not
complain if the combination is found. Also, out of overabundance of
caution, update (across all branches) README.tuplock to be more explicit
about this.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Mahendra Singh Thalor <mahi6run@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/20210124061758.GA11756@nol
Brown-paper-bag bug in 08c0d6ad6: I missed one place that needed
to guard against RAINBOW arc colors. Remarkably, nothing noticed
the invalid array access except buildfarm member thorntail.
Thanks to Noah Misch for assistance with tracking this down.
Some regular expression constructs, most notably the "." match-anything
metacharacter, produce a sheaf of parallel NFA arcs covering all
possible colors (that is, character equivalence classes). We can make
a noticeable improvement in the space and time needed to process large
regexes by replacing such cases with a single arc bearing the special
color code "RAINBOW". This requires only minor additional complication
in places such as pull() and push().
Callers of pg_reg_getoutarcs() must now be prepared for the possibility
of seeing a RAINBOW arc. For the one known user, contrib/pg_trgm,
that's a net benefit since it cuts the number of arcs to be dealt with,
and the handling isn't any different than for other colors that contain
too many characters to be dealt with individually.
This is part of a patch series that in total reduces the regex engine's
runtime by about a factor of four on a large corpus of real-world regexes.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
Add another method to specify CRLs, hashed directory method, for both
server and client side. This offers a means for server or libpq to
load only CRLs that are required to verify a certificate. The CRL
directory is specifed by separate GUC variables or connection options
ssl_crl_dir and sslcrldir, alongside the existing ssl_crl_file and
sslcrl, so both methods can be used at the same time.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/20200731.173911.904649928639357911.horikyota.ntt@gmail.com
A cross-partition update on a partitioned table is implemented as a
delete followed by an insert. With foreign partitions, this was however
causing issues, because the FDW and core may disagree on when to enable
batching. postgres_fdw was only allowing batching for plain inserts
(CMD_INSERT) while core was trying to batch the insert component of the
cross-partition update. Fix by restricting core to apply batching only
to plain CMD_INSERT queries.
It's possible to allow batching for cross-partition updates, but that
will require more extensive changes, so better to leave that for a
separate patch.
Author: Amit Langote
Reviewed-by: Tomas Vondra, Takayuki Tsunakawa
Discussion: https://postgr.es/m/20200628151002.7x5laxwpgvkyiu3q@development
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
The first attempt of this patch (commit 3b733fcd04) caused the buildfarm
member "rorqual" (built with --disable-atomics --disable-spinlocks) to report
the failure of the regression test. It was reverted by commit 890d2182a2.
The cause of this failure was that the atomic variable for "waitstart"
in the dummy process entry created at the end of prepare transaction was
not initialized. This second attempt fixes that issue.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
GistPageSetDeleted() sets pd_lower when deleting a page, and sets the
page contents to a GISTDeletedPageContents. Avoid treating deleted GiST
pages as regular slotted pages within pageinspect.
Oversight in commit 756ab291.
Author: Andrey Borodin <x4mmm@yandex-team.ru>
With its current design, a careless use of pg_cryptohash_final() could
would result in an out-of-bound write in memory as the size of the
destination buffer to store the result digest is not known to the
cryptohash internals, without the caller knowing about that. This
commit adds a new argument to pg_cryptohash_final() to allow such sanity
checks, and implements such defenses.
The internals of SCRAM for HMAC could be tightened a bit more, but as
everything is based on SCRAM_KEY_LEN with uses particular to this code
there is no need to complicate its interface more than necessary, and
this comes back to the refactoring of HMAC in core. Except that, this
minimizes the uses of the existing DIGEST_LENGTH variables, relying
instead on sizeof() for the result sizes. In ossp-uuid, this also makes
the code more defensive, as it already relied on dce_uuid_t being at
least the size of a MD5 digest.
This is in philosophy similar to cfc40d3 for base64.c and aef8948 for
hex.c.
Reported-by: Ranier Vilela
Author: Michael Paquier, Ranier Vilela
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAEudQAoqEGmcff3J4sTSV-R_16Monuz-UpJFbf_dnVH=APr02Q@mail.gmail.com
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
If a cross-partition UPDATE violates a constraint on the target partition,
and the columns in the new partition are in different physical order than
in the parent, the error message can reveal columns that the user does not
have SELECT permission on. A similar bug was fixed earlier in commit
804b6b6db4.
The cause of the bug is that the callers of the
ExecBuildSlotValueDescription() function got confused when constructing
the list of modified columns. If the tuple was routed from a parent, we
converted the tuple to the parent's format, but the list of modified
columns was grabbed directly from the child's RTE entry.
ExecUpdateLockMode() had a similar issue. That lead to confusion on which
columns are key columns, leading to wrong tuple lock being taken on tables
referenced by foreign keys, when a row is updated with INSERT ON CONFLICT
UPDATE. A new isolation test is added for that corner case.
With this patch, the ri_RangeTableIndex field is no longer set for
partitions that don't have an entry in the range table. Previously, it was
set to the RTE entry of the parent relation, but that was confusing.
NOTE: This modifies the ResultRelInfo struct, replacing the
ri_PartitionRoot field with ri_RootResultRelInfo. That's a bit risky to
backpatch, because it breaks any extensions accessing the field. The
change that ri_RangeTableIndex is not set for partitions could potentially
break extensions, too. The ResultRelInfos are visible to FDWs at least,
and this patch required small changes to postgres_fdw. Nevertheless, this
seem like the least bad option. I don't think these fields widely used in
extensions; I don't think there are FDWs out there that uses the FDW
"direct update" API, other than postgres_fdw. If there is, you will get a
compilation error, so hopefully it is caught quickly.
Backpatch to 11, where support for both cross-partition UPDATEs, and unique
indexes on partitioned tables, were added.
Reviewed-by: Amit Langote
Security: CVE-2021-3393
Commit 08d2d58a2 added an assertion assuming that the retrieved_rows
estimate for a foreign relation, which is re-used to cost pre-sorted
foreign paths with local stats, is set to at least one row in
estimate_path_cost_size(), which isn't correct because if the relation
is a foreign table with tuples=0, the estimate would be set to 0 there
when not using remote estimates.
Per bug #16807 from Alexander Lakhin. Back-patch to v13 where the
aforementioned commit went in.
Author: Etsuro Fujita
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/16807-9fe4e08fbaa5c7ce%40postgresql.org
The ExecutorEnd hook is invoked in a context that could be quite
long-lived, not the executor's own per-query context as I think
we were sort of assuming. Thus, any cruft generated while producing
the EXPLAIN output could accumulate over multiple queries. This can
result in spectacular leakage if log_nested_statements is on, and
even without that I'm surprised nobody complained before.
To fix, just switch into the executor's context so that anything we
allocate will be released when standard_ExecutorEnd frees the executor
state. We might as well nuke the code's retail pfree of the explain
output string, too; that's laughably inadequate to the need.
Japin Li, per report from Jeff Janes. This bug is old, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/CAMkU=1wCVtbeRn0s9gt12KwQ7PLXovbpM8eg25SYocKW3BT4hg@mail.gmail.com
This is a replacement for the existing --with-openssl, extending the
logic to make easier the addition of new SSL libraries. The grammar is
chosen to be similar to --with-uuid, where multiple values can be
chosen, with "openssl" as the only supported value for now.
The original switch, --with-openssl, is kept for compatibility.
Author: Daniel Gustafsson, Michael Paquier
Reviewed-by: Jacob Champion
Discussion: https://postgr.es/m/FAB21FC8-0F62-434F-AA78-6BD9336D630A@yesql.se
The regression tests added in commits 708d165ddb and 411ae64997 caused
buildfarm failures when CLOBBER_CACHE_ALWAYS was enabled.
This commit stabilizes those tests.
The foreign server connections established by postgres_fdw behaves
differently depending on whether CLOBBER_CACHE_ALWAYS is enabled or not.
If it's not enabled, those connections are cached. On the other hand,
if it's enabled, when the connections are established outside transaction
block, they are not cached (i.e., they are immediately closed at the end of
query that established them). So the subsequent postgres_fdw_get_connections()
cannot list those connections and postgres_fdw_disconnect() cannot close them
(because they are already closed).
When the connections are established inside transaction block, they are
cached whether CLOBBER_CACHE_ALWAYS was enabled or not. But if it's enabled,
they are immediately marked as invalid, otherwise not. This causes the
subsequent postgres_fdw_get_connections() to return different result in
"valid" column depending on whether CLOBBER_CACHE_ALWAYS was enabled or not.
This commit prevents the above differences of behavior from
affecting the regression tests.
Per buildfarm failure on trilobite.
Original patch by Bharath Rupireddy. I (Fujii Masao) extracted
the regression test fix from that and revised it a bit.
Reported-by: Tom Lane
Author: Bharath Rupireddy
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/2688508.1611865371@sss.pgh.pa.us
pg_standby was useful more than a decade ago, but now it is obsolete.
It has been proposed that we retire it many times. Now seems like a
good time to finally do it, because "waiting restore commands"
are incompatible with a proposed recovery prefetching feature.
Discussion: https://postgr.es/m/20201029024412.GP5380%40telsasoft.com
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
CREATE TABLE AS has been preferred over SELECT INTO (outside of ecpg
and PL/pgSQL) for a long time. There were still a few uses of SELECT
INTO in tests and documentation, some old, some more recent. This
changes them to CREATE TABLE AS. Some occurrences in the tests remain
where they are specifically testing SELECT INTO parsing or similar.
Discussion: https://www.postgresql.org/message-id/flat/96dc0df3-e13a-a85d-d045-d6e2c85218da%40enterprisedb.com
Other code paths are already protected against this case, and _PG_init()
warns about that in pg_stat_statements.c. While on it, I have checked
the other extensions of the tree but did not notice any holes.
Oversight in 9fbc3f3.
Author: Jaime Casanova
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CAJKUy5gF4=_=qhJ1VX_tSGFfjKHb9BvzhRYWSApJD=Bfwp2SBw@mail.gmail.com
The regression test added in commit 411ae64997 caused buildfarm failures.
The cause of them was that the order of warning messages output in the test
was not stable. To fix this, this commit sets client_min_messages to ERROR
temporarily when performing the test generating those warnings.
Per buildfarm failures.
Discussion: https://postgr.es/m/2147113.1611644754@sss.pgh.pa.us
This commit introduces two new functions postgres_fdw_disconnect()
and postgres_fdw_disconnect_all(). The former function discards
the cached connections to the specified foreign server. The latter discards
all the cached connections. If the connection is used in the current
transaction, it's not closed and a warning message is emitted.
For example, these functions are useful when users want to explicitly
close the foreign server connections that are no longer necessary and
then to prevent them from eating up the foreign servers connections
capacity.
Author: Bharath Rupireddy, tweaked a bit by Fujii Masao
Reviewed-by: Alexey Kondratov, Zhijie Hou, Zhihong Yu, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVvrp5=AVp2PupEm+nAC8S4buqR3fJMmaCoc7ftT0aD2A@mail.gmail.com
With this commit, SHA1 goes through the implementation provided by
OpenSSL via EVP when building the backend with it, and uses as fallback
implementation KAME which was located in pgcrypto and already shaped for
an integration with a set of init, update and final routines.
Structures and routines have been renamed to make things consistent with
the fallback implementations of MD5 and SHA2.
uuid-ossp has used for ages a shortcut with pgcrypto to fetch a copy of
SHA1 if needed. This was built depending on the build options within
./configure, so this cleans up some code and removes the build
dependency between pgcrypto and uuid-ossp.
Note that this will help with the refactoring of HMAC, as pgcrypto
offers the option to use MD5, SHA1 or SHA2, so only the second option
was missing to make that possible.
Author: Michael Paquier
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/X9HXKTgrvJvYO7Oh@paquier.xyz
libpq's error messages for connection failures pretty well stand on
their own, especially since commits 52a10224e/27a48e5a1. Prefixing
them with 'could not connect to database "foo"' or the like is just
redundant, and perhaps even misleading if the specific database name
isn't relevant to the failure. (When it is, we trust that the
backend's error message will include the DB name.) Indeed, psql
hasn't used any such prefix in a long time. So, make all our other
programs and documentation examples agree with psql's practice.
Discussion: https://postgr.es/m/1094524.1611266589@sss.pgh.pa.us
Previously, pull_varnos() took the relids of a PlaceHolderVar as being
equal to the relids in its contents, but that fails to account for the
possibility that we have to postpone evaluation of the PHV due to outer
joins. This could result in a malformed plan. The known cases end up
triggering the "failed to assign all NestLoopParams to plan nodes"
sanity check in createplan.c, but other symptoms may be possible.
The right value to use is the join level we actually intend to evaluate
the PHV at. We can get that from the ph_eval_at field of the associated
PlaceHolderInfo. However, there are some places that call pull_varnos()
before the PlaceHolderInfos have been created; in that case, fall back
to the conservative assumption that the PHV will be evaluated at its
syntactic level. (In principle this might result in missing some legal
optimization, but I'm not aware of any cases where it's an issue in
practice.) Things are also a bit ticklish for calls occurring during
deconstruct_jointree(), but AFAICS the ph_eval_at fields should have
reached their final values by the time we need them.
The main problem in making this work is that pull_varnos() has no
way to get at the PlaceHolderInfos. We can fix that easily, if a
bit tediously, in HEAD by passing it the planner "root" pointer.
In the back branches that'd cause an unacceptable API/ABI break for
extensions, so leave the existing entry points alone and add new ones
with the additional parameter. (If an old entry point is called and
encounters a PHV, it'll fall back to using the syntactic level,
again possibly missing some valid optimization.)
Back-patch to v12. The computation is surely also wrong before that,
but it appears that we cannot reach a bad plan thanks to join order
restrictions imposed on the subquery that the PlaceHolderVar came from.
The error only became reachable when commit 4be058fe9 allowed trivial
subqueries to be collapsed out completely, eliminating their join order
restrictions.
Per report from Stephan Springl.
Discussion: https://postgr.es/m/171041.1610849523@sss.pgh.pa.us
Extends the FDW API to allow batching inserts into foreign tables. That
is usually much more efficient than inserting individual rows, due to
high latency for each round-trip to the foreign server.
It was possible to implement something similar in the regular FDW API,
but it was inconvenient and there were issues with reporting the number
of actually inserted rows etc. This extends the FDW API with two new
functions:
* GetForeignModifyBatchSize - allows the FDW picking optimal batch size
* ExecForeignBatchInsert - inserts a batch of rows at once
Currently, only INSERT queries support batching. Support for DELETE and
UPDATE may be added in the future.
This also implements batching for postgres_fdw. The batch size may be
specified using "batch_size" option both at the server and table level.
The initial patch version was written by me, but it was rewritten and
improved in many ways by Takayuki Tsunakawa.
Author: Takayuki Tsunakawa
Reviewed-by: Tomas Vondra, Amit Langote
Discussion: https://postgr.es/m/20200628151002.7x5laxwpgvkyiu3q@development
By default VACUUM will skip pages that it can't immediately get
exclusive access to, which means that even activities as harmless
and unpredictable as checkpoint buffer writes might prevent a page
from being processed. Ordinarily this is no big deal, but we have
a small number of test cases that examine the results of VACUUM's
processing and therefore will fail if the page of interest is skipped.
This seems to be the explanation for some rare buildfarm failures.
To fix, add the DISABLE_PAGE_SKIPPING option to the VACUUM commands
in tests where this could be an issue.
In passing, remove a duplicated query in pageinspect/sql/page.sql.
Back-patch as necessary (some of these cases are as old as v10).
Discussion: https://postgr.es/m/413923.1611006484@sss.pgh.pa.us
Block numbers are 32-bit unsigned integers. Therefore, the smallest
SQL integer type that they can fit in is bigint. However, in the
pageinspect module, most input and output parameters dealing with
block numbers were declared as int. The behavior with block numbers
larger than a signed 32-bit integer was therefore dubious. Change
these arguments to type bigint and add some more explicit error
checking on the block range.
(Other contrib modules appear to do this correctly already.)
Since we are changing argument types of existing functions, in order
to not misbehave if the binary is updated before the extension is
updated, we need to create new C symbols for the entry points, similar
to how it's done in other extensions as well.
Reported-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/d8f6bdd536df403b9b33816e9f7e0b9d@G08CNEXMBPEKD05.g08.fujitsu.local
Per Coverity. BuildIndexValueDescription() cannot actually return NULL in
this instance, because it only returns NULL if the user doesn't have the
required privileges, and this function can only be used by superuser. But
better safe than sorry.
This commit adds function postgres_fdw_get_connections() to return
the foreign server names of all the open connections that postgres_fdw
established from the local session to the foreign servers. This function
also returns whether each connection is valid or not.
This function is useful when checking all the open foreign server connections.
If we found some connection to drop, from the result of function, probably
we can explicitly close them by the function that upcoming commit will add.
This commit bumps the version of postgres_fdw to 1.1 since it adds
new function.
Author: Bharath Rupireddy, tweaked by Fujii Masao
Reviewed-by: Zhijie Hou, Alexey Kondratov, Zhihong Yu, Fujii Masao
Discussion: https://postgr.es/m/2d5cb0b3-a6e8-9bbb-953f-879f47128faa@oss.nttdata.com
The gist_page_items() function opened the index relation on first call and
closed it on the last call. But there's no guarantee that the function is
run to completion, leading to a relcache leak and warning at the end of
the transaction. To fix, refactor the function to return all the rows in
one call, as a tuplestore.
Reported-by: Tom Lane
Discussion: https://www.postgresql.org/message-id/234863.1610916631%40sss.pgh.pa.us
Make sure COPY FREEZE marks the pages as PD_ALL_VISIBLE and updates the
visibility map. Until now we only marked individual tuples as frozen,
but page-level flags were not updated, so the first VACUUM after the
COPY FREEZE had to rewrite the whole table.
This is a fairly old patch, and multiple people worked on it. The first
version was written by Jeff Janes, and then reworked by Pavan Deolasee
and Anastasia Lubennikova.
Author: Anastasia Lubennikova, Pavan Deolasee, Jeff Janes
Reviewed-by: Kuntal Ghosh, Jeff Janes, Tomas Vondra, Masahiko Sawada,
Andres Freund, Ibrar Ahmed, Robert Haas, Tatsuro Ishii,
Darafei Praliaskouski
Discussion: https://postgr.es/m/CABOikdN-ptGv0mZntrK2Q8OtfUuAjqaYMGmkdU1dCKFtUxVLrg@mail.gmail.com
Discussion: https://postgr.es/m/CAMkU%3D1w3osJJ2FneELhhNRLxfZitDgp9FPHee08NT2FQFmz_pQ%40mail.gmail.com
The foreign server OID stored in the connection cache entry is used as
a lookup key to directly get the server name.
Previously since the connection cache entry did not have the server OID,
postgres_fdw had to get the server OID at first from user mapping before
getting the server name. So if the corresponding user mapping was dropped,
postgres_fdw could raise the error "cache lookup failed for user mapping"
while looking up user mapping and fail to get the server name even though
the server had not been dropped yet.
Author: Bharath Rupireddy
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVRZPUB7ZwqLn-6DY8C_UmPs6084gSpHA92YBv++1AJXA@mail.gmail.com
The newly-added gist pageinspect test prints the LSNs of GiST pages,
expecting them all to be 1 (GistBuildLSN). But with wal_level=minimal,
they got updated by the whole-relation WAL-logging at commit. Fix by
wrapping the problematic tests in the same transaction with the CREATE
INDEX.
Per buildfarm failure on thorntail.
Discussion: https://www.postgresql.org/message-id/3B4F97E5-40FB-4142-8CAA-B301CDFBF982%40iki.fi
Add an executor aminsert() hint mechanism that informs index AMs that
the incoming index tuple (the tuple that accompanies the hint) is not
being inserted by execution of an SQL statement that logically modifies
any of the index's key columns.
The hint is received by indexes when an UPDATE takes place that does not
apply an optimization like heapam's HOT (though only for indexes where
all key columns are logically unchanged). Any index tuple that receives
the hint on insert is expected to be a duplicate of at least one
existing older version that is needed for the same logical row. Related
versions will typically be stored on the same index page, at least
within index AMs that apply the hint.
Recognizing the difference between MVCC version churn duplicates and
true logical row duplicates at the index AM level can help with cleanup
of garbage index tuples. Cleanup can intelligently target tuples that
are likely to be garbage, without wasting too many cycles on less
promising tuples/pages (index pages with little or no version churn).
This is infrastructure for an upcoming commit that will teach nbtree to
perform bottom-up index deletion. No index AM actually applies the hint
just yet.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=CEKFa74EScx_hFVshCOn6AA5T-ajFASTdzipdkLTNQQ@mail.gmail.com
1. The raw bytea representation of the point-type keys used in the test
depends on endianess. Remove the raw key_data column from the test.
2. The items stored on non-leftmost gist page depends on how many items
git on the other pages. This showed up as a failure on 32-bit i386
systems. To fix, only test the gist_page_items() function on the
leftmost leaf page.
Per Andrey Borodin and the buildfarm.
Discussion: https://www.postgresql.org/message-id/9FCEC1DC-86FB-4A57-88EF-DD13663B36AF%40yandex-team.ru
Commit 5a3574d7b3 added the test for decoding of two-phase transactions
during the build of a consistent snapshot. The test forgot to skip empty
xacts which can lead to decoding of extra empty transactions due to
background activity by autovacuum.
Per report by buildfarm.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/363512.1610171267@sss.pgh.pa.us
This commit addresses two issues:
- In pgcrypto, MD5 computation called pg_cryptohash_{init,update,final}
without checking for the result status.
- Simplify pg_checksum_raw_context to use only one variable for all the
SHA2 options available in checksum manifests.
Reported-by: Heikki Linnakangas
Discussion: https://postgr.es/m/f62f26bb-47a5-8411-46e5-4350823e06a5@iki.fi
Invent new RawParseModes that allow the core grammar to handle
pl/pgsql expressions and assignments directly, and thereby get rid
of a lot of hackery in pl/pgsql's parser. This moves a good deal
of knowledge about pl/pgsql into the core code: notably, we have to
invent a CoercionContext that matches pl/pgsql's (rather dubious)
historical behavior for assignment coercions. That's getting away
from the original idea of pl/pgsql as an arm's-length extension of
the core, but really we crossed that bridge a long time ago.
The main advantage of doing this is that we can now use the core
parser to generate FieldStore and/or SubscriptingRef nodes to handle
assignments to pl/pgsql variables that are records or arrays. That
fixes a number of cases that had never been implemented in pl/pgsql
assignment, such as nested records and array slicing, and it allows
pl/pgsql assignment to support the datatype-specific subscripting
behaviors introduced in commit c7aba7c14.
There are cosmetic benefits too: when a syntax error occurs in a
pl/pgsql expression, the error report no longer includes the confusing
"SELECT" keyword that used to get prefixed to the expression text.
Also, there seem to be some small speed gains.
Discussion: https://postgr.es/m/4165684.1607707277@sss.pgh.pa.us
This patch allows PREPARE-time decoding of two-phase transactions (if the
output plugin supports this capability), in which case the transactions
are replayed at PREPARE and then committed later when COMMIT PREPARED
arrives.
Now that we decode the changes before the commit, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We detect such failures with a special sqlerrcode
ERRCODE_TRANSACTION_ROLLBACK introduced by commit 7259736a6e and stop
decoding the remaining changes. Then we rollback the changes when rollback
prepared is encountered.
Author: Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Peter Smith, Sawada Masahiko, Arseny Sher, and Dilip Kumar
Tested-by: Takamichi Osumi
Discussion:
https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ruhttps://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
Since at least 2001 we've used putenv() and avoided setenv(), on the
grounds that the latter was unportable and not in POSIX. However,
POSIX added it that same year, and by now the situation has reversed:
setenv() is probably more portable than putenv(), since POSIX now
treats the latter as not being a core function. And setenv() has
cleaner semantics too. So, let's reverse that old policy.
This commit adds a simple src/port/ implementation of setenv() for
any stragglers (we have one in the buildfarm, but I'd not be surprised
if that code is never used in the field). More importantly, extend
win32env.c to also support setenv(). Then, replace usages of putenv()
with setenv(), and get rid of some ad-hoc implementations of setenv()
wannabees.
Also, adjust our src/port/ implementation of unsetenv() to follow the
POSIX spec that it returns an error indicator, rather than returning
void as per the ancient BSD convention. I don't feel a need to make
all the call sites check for errors, but the portability stub ought
to match real-world practice.
Discussion: https://postgr.es/m/2065122.1609212051@sss.pgh.pa.us
This adds six methods to the output plugin API, adding support for
streaming changes of two-phase transactions at prepare time.
* begin_prepare
* filter_prepare
* prepare
* commit_prepared
* rollback_prepared
* stream_prepare
Most of this is a simple extension of the existing methods, with the
semantic difference that the transaction is not yet committed and maybe
aborted later.
Until now two-phase transactions were translated into regular transactions
on the subscriber, and the GID was not forwarded to it. None of the
two-phase commands were communicated to the subscriber.
This patch provides the infrastructure for logical decoding plugins to be
informed of two-phase commands Like PREPARE TRANSACTION, COMMIT PREPARED
and ROLLBACK PREPARED commands with the corresponding GID.
This also extends the 'test_decoding' plugin, implementing these new
methods.
This commit simply adds these new APIs and the upcoming patch to "allow
the decoding at prepare time in ReorderBuffer" will use these APIs.
Author: Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Peter Smith, Sawada Masahiko, and Dilip Kumar
Discussion:
https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ruhttps://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
Those two modules included references to libpq's source path, without
using anything from libpq. Some copy-pastos done when each module was
created are likely at the origin of those useless references (aecf5ee
for old_snapshot, fe59e56 for adminpack).
Reviewed-by: Tom Lane, David Rowley
Discussion: https://postgr.es/m/X+LQpfLyk7jgzUki@paquier.xyz
In postgres_fdw, the cached connections to foreign servers will not be
closed until the local session exits if the user mappings or foreign servers
that those connections depend on are dropped. Those connections can be
leaked.
To fix that connection leak issue, after a change to a pg_foreign_server
or pg_user_mapping catalog entry, this commit makes postgres_fdw close
the connections depending on that entry immediately if current
transaction has not used those connections yet. Otherwise, mark those
connections as invalid and then close them at the end of current transaction,
since they cannot be closed in the midst of the transaction using them.
Closed connections will be remade at the next opportunity if necessary.
Back-patch to all supported branches.
Author: Bharath Rupireddy
Reviewed-by: Zhihong Yu, Zhijie Hou, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVNcGH_6qLY-4_tXz8JLvA+4yeBThRfxMz7Oxbk1aHcpQ@mail.gmail.com
If a database shutdown (smart or fast) is commanded between the time
some process decides to request a new background worker and the time
that the postmaster can launch that worker, then nothing happens
because the postmaster won't launch any bgworkers once it's exited
PM_RUN state. This is fine ... unless the requesting process is
waiting for that worker to finish (or even for it to start); in that
case the requestor is stuck, and only manual intervention will get us
to the point of being able to shut down.
To fix, cancel pending requests for workers when the postmaster sends
shutdown (SIGTERM) signals, and similarly cancel any new requests that
arrive after that point. (We can optimize things slightly by only
doing the cancellation for workers that have waiters.) To fit within
the existing bgworker APIs, the "cancel" is made to look like the
worker was started and immediately stopped, causing deregistration of
the bgworker entry. Waiting processes would have to deal with
premature worker exit anyway, so this should introduce no bugs that
weren't there before. We do have a side effect that registration
records for restartable bgworkers might disappear when theoretically
they should have remained in place; but since we're shutting down,
that shouldn't matter.
Back-patch to v10. There might be value in putting this into 9.6
as well, but the management of bgworkers is a bit different there
(notably see 8ff518699) and I'm not convinced it's worth the effort
to validate the patch for that branch.
Discussion: https://postgr.es/m/661570.1608673226@sss.pgh.pa.us
Bad things happen if the DBA issues "pg_ctl stop -m fast" before
autoprewarm finishes loading its list of blocks to prewarm.
The current worker process successfully terminates early, but
(if this wasn't the last database with blocks to prewarm) the
leader process will just try to launch another worker for the
next database. Since the postmaster is now in PM_WAIT_BACKENDS
state, it ignores the launch request, and the leader just sits
until it's killed manually.
This is mostly the fault of our half-baked design for launching
background workers, but a proper fix for that is likely to be
too invasive to be back-patchable. To ameliorate the situation,
fix apw_load_buffers() to check whether SIGTERM has arrived
just before trying to launch another worker. That leaves us with
only a very narrow window in each worker launch where SIGTERM
could occur between the launch request and successful worker start.
Another issue is that if the leader process does manage to exit,
it unconditionally rewrites autoprewarm.blocks with only the
blocks currently in shared buffers, thus forgetting any blocks
that we hadn't reached yet while prewarming. This seems quite
unhelpful, since the next database start will then not have the
expected prewarming benefit. Fix it to not modify the file if
we shut down before the initial load attempt is complete.
Per bug #16785 from John Thompson. Back-patch to v11 where
the autoprewarm code was introduced.
Discussion: https://postgr.es/m/16785-c0207d8c67fb5f25@postgresql.org
The same logic was present for collation commands, SASLprep and
pgcrypto, so this removes some code.
Author: Michael Paquier
Reviewed-by: Stephen Frost, Heikki Linnakangas
Discussion: https://postgr.es/m/X9womIn6rne6Gud2@paquier.xyz
This commit adds "stats_reset" column into the pg_stat_statements_info
view. This column indicates the time at which all statistics in the
pg_stat_statements view were last reset.
Per discussion, this commit also changes pg_stat_statements_info code
so that "dealloc" column is reset at the same time as "stats_reset" is reset,
i.e., whenever all pg_stat_statements entries are removed, for the sake
of consistency. Previously "dealloc" was reset only when
pg_stat_statements_reset(0, 0, 0) is called and was not reset when
pg_stat_statements_reset() with non-zero value argument discards all
entries. This was confusing.
Author: Naoki Nakamichi, Yuki Seino
Reviewed-by: Yuki Seino, Kyotaro Horiguchi, Li Japin, Fujii Masao
Discussion: https://postgr.es/m/c102cf3180d0ee73c1c5a0f7f8558322@oss.nttdata.com
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
This adjusts some code related to recent changes for cryptohash
functions:
- Add a variable in md5.h to track down the size of a computed result,
moved from pgcrypto. Note that pg_md5_hash() assumed a result of this
size already.
- Call explicit_bzero() on the hashed data when freeing the context for
fallback implementations. For MD5, particularly, it would be annoying
to leave some non-zeroed data around.
- Clean up some code related to recent changes of uuid-ossp. .gitignore
still included md5.c and a comment was incorrect.
Discussion: https://postgr.es/m/X9HXKTgrvJvYO7Oh@paquier.xyz
This is basically a finger exercise to prove that it's possible for
an extension module to add subscripting ability. Subscripted fetch
from an hstore is not different from the existing "hstore -> text"
operator. Subscripted update does seem to be a little easier to
use than the traditional update method using hstore concatenation,
but it's not a fundamentally new ability.
However, there may be some value in the code as sample code, since
it shows what's basically the minimum-complexity way to implement
subscripting when one needn't consider nested container objects.
Discussion: https://postgr.es/m/3724341.1607551174@sss.pgh.pa.us
This module had a dependency on pgcrypto's md5.c that got removed by
b67b57a. Instead of the code from pgcrypto, this code can just use the
new cryptohash routines for MD5 as a drop-in replacement, so let's just
do this switch. This has also the merit to simplify a bit the
compilation of uuid-ossp.
This requires --with-uuid to be reproduced, and I have used e2fs as a
way to reproduce the failure, then test this commit.
Per reports from buildfarm members longfin, florican and sifaka.
Discussion: https://postgr.es/m/X9GToVd3QmWeNvj8@paquier.xyz
This commit heavily reorganizes the MD5 implementations that exist in
the tree in various aspects.
First, MD5 is added to the list of options available in cryptohash.c and
cryptohash_openssl.c. This means that if building with OpenSSL, EVP is
used for MD5 instead of the fallback implementation that Postgres had
for ages. With the recent refactoring work for cryptohash functions,
this change is straight-forward. If not building with OpenSSL, a
fallback implementation internal to src/common/ is used.
Second, this reduces the number of MD5 implementations present in the
tree from two to one, by moving the KAME implementation from pgcrypto to
src/common/, and by removing the implementation that existed in
src/common/. KAME was already structured with an init/update/final set
of routines by pgcrypto (see original pgcrypto/md5.h) for compatibility
with OpenSSL, so moving it to src/common/ has proved to be a
straight-forward move, requiring no actual manipulation of the internals
of each routine. Some benchmarking has not shown any performance gap
between both implementations.
Similarly to the fallback implementation used for SHA2, the fallback
implementation of MD5 is moved to src/common/md5.c with an internal
header called md5_int.h for the init, update and final routines. This
gets then consumed by cryptohash.c.
The original routines used for MD5-hashed passwords are moved to a
separate file called md5_common.c, also in src/common/, aimed at being
shared between all MD5 implementations as utility routines to keep
compatibility with any code relying on them.
Like the SHA2 changes, this commit had its round of tests on both Linux
and Windows, across all versions of OpenSSL supported on HEAD, with and
even without OpenSSL.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20201106073434.GA4961@paquier.xyz
This patch generalizes the subscripting infrastructure so that any
data type can be subscripted, if it provides a handler function to
define what that means. Traditional variable-length (varlena) arrays
all use array_subscript_handler(), while the existing fixed-length
types that support subscripting use raw_array_subscript_handler().
It's expected that other types that want to use subscripting notation
will define their own handlers. (This patch provides no such new
features, though; it only lays the foundation for them.)
To do this, move the parser's semantic processing of subscripts
(including coercion to whatever data type is required) into a
method callback supplied by the handler. On the execution side,
replace the ExecEvalSubscriptingRef* layer of functions with direct
calls to callback-supplied execution routines. (Thus, essentially
no new run-time overhead should be caused by this patch. Indeed,
there is room to remove some overhead by supplying specialized
execution routines. This patch does a little bit in that line,
but more could be done.)
Additional work is required here and there to remove formerly
hard-wired assumptions about the result type, collation, etc
of a SubscriptingRef expression node; and to remove assumptions
that the subscript values must be integers.
One useful side-effect of this is that we now have a less squishy
mechanism for identifying whether a data type is a "true" array:
instead of wiring in weird rules about typlen, we can look to see
if pg_type.typsubscript == F_ARRAY_SUBSCRIPT_HANDLER. For this
to be bulletproof, we have to forbid user-defined types from using
that handler directly; but there seems no good reason for them to
do so.
This patch also removes assumptions that the number of subscripts
is limited to MAXDIM (6), or indeed has any hard-wired limit.
That limit still applies to types handled by array_subscript_handler
or raw_array_subscript_handler, but to discourage other dependencies
on this constant, I've moved it from c.h to utils/array.h.
Dmitry Dolgov, reviewed at various times by Tom Lane, Arthur Zakirov,
Peter Eisentraut, Pavel Stehule
Discussion: https://postgr.es/m/CA+q6zcVDuGBv=M0FqBYX8DPebS3F_0KQ6OVFobGJPM507_SZ_w@mail.gmail.com
Discussion: https://postgr.es/m/CA+q6zcVovR+XY4mfk-7oNk-rF91gH0PebnNfuUjuuDsyHjOcVA@mail.gmail.com
The following routines are called within pgcrypto when handling digests
but there were no checks for failures:
- EVP_MD_CTX_size (can fail with -1 as of 3.0.0)
- EVP_MD_CTX_block_size (can fail with -1 as of 3.0.0)
- EVP_DigestInit_ex
- EVP_DigestUpdate
- EVP_DigestFinal_ex
A set of elog(ERROR) is added by this commit to detect such failures,
that should never happen except in the event of a processing failure
internal to OpenSSL.
Note that it would be possible to use ERR_reason_error_string() to get
more context about such errors, but these refer mainly to the internals
of OpenSSL, so it is not really obvious how useful that would be. This
is left out for simplicity.
Per report from Coverity. Thanks to Tom Lane for the discussion.
Backpatch-through: 9.5
Two new routines to allocate a hash context and to free it are created,
as these become necessary for the goal behind this refactoring: switch
the all cryptohash implementations for OpenSSL to use EVP (for FIPS and
also because upstream does not recommend the use of low-level cryptohash
functions for 20 years). Note that OpenSSL hides the internals of
cryptohash contexts since 1.1.0, so it is necessary to leave the
allocation to OpenSSL itself, explaining the need for those two new
routines. This part is going to require more work to properly track
hash contexts with resource owners, but this not introduced here.
Still, this refactoring makes the move possible.
This reduces the number of routines for all SHA2 implementations from
twelve (SHA{224,256,386,512} with init, update and final calls) to five
(create, free, init, update and final calls) by incorporating the hash
type directly into the hash context data.
The new cryptohash routines are moved to a new file, called cryptohash.c
for the fallback implementations, with SHA2 specifics becoming a part
internal to src/common/. OpenSSL specifics are part of
cryptohash_openssl.c. This infrastructure is usable for more hash
types, like MD5 or HMAC.
Any code paths using the internal SHA2 routines are adapted to report
correctly errors, which are most of the changes of this commit. The
zones mostly impacted are checksum manifests, libpq and SCRAM.
Note that e21cbb4 was a first attempt to switch SHA2 to EVP, but it
lacked the refactoring needed for libpq, as done here.
This patch has been tested on Linux and Windows, with and without
OpenSSL, and down to 1.0.1, the oldest version supported on HEAD.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20200924025314.GE7405@paquier.xyz
If more distinct statements than pg_stat_statements.max are observed,
pg_stat_statements entries about the least-executed statements are
deallocated. This commit enables us to track the total number of times
those entries were deallocated. That number can be viewed in the
pg_stat_statements_info view that this commit adds. It's useful when
tuning pg_stat_statements.max parameter. If it's high, i.e., the entries
are deallocated very frequently, which might cause the performance
regression and we can increase pg_stat_statements.max to avoid those
frequent deallocations.
The pg_stat_statements_info view is intended to display the statistics
of pg_stat_statements module itself. Currently it has only one column
"dealloc" indicating the number of times entries were deallocated.
But an upcoming patch will add other columns (for example, the time
at which pg_stat_statements statistics were last reset) into the view.
Author: Katsuragi Yuta, Yuki Seino
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/0d9f1107772cf5c3f954e985464c7298@oss.nttdata.com
The function converted the first argument i.e. the number of tuples to
return into an unsigned integer which turns out to be huge number when
a negative value is passed. This causes the function to take much
longer time to execute. Instead, reject a negative value.
(If someone really wants to generate many more result rows, they
should consider adding a bigint or numeric variant.)
While at it, improve SQL test to test the number of tuples returned by
this function.
Author: Ashutosh Bapat <ashutosh.bapat@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/CAG-ACPW3PUUmSnM6cLa9Rw4BEC5cEMKjX8Gogc8gvQcT3cYA1A@mail.gmail.com
Commit 0a2bc5d61e changed the order that permissions on the final and
transition functions of an aggregate are checked in. That shows up as a
difference in the order the LOG messages in this sepgsql regression test
are printed. Adjust the expected output.
Per buildfarm failure in rhinoceros.
Copy.c has grown really large. Split it into more manageable parts:
- copy.c now contains only a few functions that are common to COPY FROM
and COPY TO.
- copyto.c contains code for COPY TO.
- copyfrom.c contains code for initializing COPY FROM, and inserting the
tuples to the correct table.
- copyfromparse.c contains code for reading from the client/file/program,
and parsing the input text/CSV/binary format into tuples.
All of these parts are fairly complicated, and fairly independent of each
other. There is a patch being discussed to implement parallel COPY FROM,
which will add a lot of new code to the COPY FROM path, and another patch
which would allow INSERTs to use the same multi-insert machinery as COPY
FROM, both of which will require refactoring that code. With those two
patches, there's going to be a lot of code churn in copy.c anyway, so now
seems like a good time to do this refactoring.
The CopyStateData struct is also split. All the formatting options, like
FORMAT, QUOTE, ESCAPE, are put in a new CopyFormatOption struct, which
is used by both COPY FROM and TO. Other state data are kept in separate
CopyFromStateData and CopyToStateData structs.
Reviewed-by: Soumyadeep Chakraborty, Erik Rijkers, Vignesh C, Andres Freund
Discussion: https://www.postgresql.org/message-id/8e15b560-f387-7acc-ac90-763986617bfb%40iki.fi
In streaming mode, the transaction can be decoded in multiple streams and
those streams can be interleaved with streams of other transactions. So,
we can't remember the transaction's write status in the logical decoding
context because that might get changed due to some other transactions and
lead to wrong answers for 'skip-empty-xacts' option. We decided to keep
each transaction's write status in the ReorderBufferTxn to avoid
interleaved streams changing the status of some unrelated transactions.
Diagnosed-by: Amit Kapila
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1LR7=XNM_TLmpZMFuV8ZQpoxkem--NZJYf8YXmesbvwLA@mail.gmail.com
Obviously, in order to equality operator be satisfiable, target string must
contain all the trigrams of the search string. On this base, we implement
equality operator in GiST/GIN indexes with recheck.
Discussion: https://postgr.es/m/CAOBaU_YWwtT7tdggtROacjdOdeYHCz-tmSwuC-j-TOG-g97J0w%40mail.gmail.com
Author: Julien Rouhaud
Reviewed-by: Tom Lane, Alexander Korotkov, Georgios Kokolatos, Erik Rijkers
Whether from size overflow in gistSplit or from secondary splits,
picksplit is (rarely) called with exactly two items to split.
Formerly, due to special-case handling of the last item, this would
lead to access to an uninitialized cache entry; prior to PG 13 this
might have been harmless or at worst led to an incorrect union datum,
but in 13 onwards it can cause a backend crash from using an
uninitialized pointer.
Repair by removing the special case, which was deemed not to have been
appropriate anyway. Backpatch all the way, because this bug has
existed since pg_trgm was added.
Per report on IRC from user "ftzdomino". Analysis and testing by me,
patch from Alexander Korotkov.
Discussion: https://postgr.es/m/87k0usfdxg.fsf@news-spur.riddles.org.uk
911e702077 has introduced the opclass parameters including signature length
for a set of GiST opclasses. Due to copy-pasting, macro for getting the
signature length in trgm_gist.c was named LTREE_GET_ASIGLEN(). Fix that by
renaming this macro to just GET_SIGLEN().
Backpatch-through: 13
Commit 6023b7ea71 allowed pg_stat_statements to track the number
of rows retrieved or affected by some utility commands including
CREATE MATERIALIZED VIEW. However it did not track the rowcount
of REFRESH MATERIALIZED VIEW. This commit allows pg_stat_statements
to track that.
To track that, this commit changes the query completion for
REFRESH MATERIALIZED VIEW so that it saves the rowcount. But note that
the rowcount is still not displayed in the command completion tag output.
That is, the display_rowcount flag of CMDTAG_REFRESH_MATERIALIZED_VIEW
command tag is left false in cmdtaglist.h. Otherwise, the change of
completion tag output might break applications using it.
Author: Katsuragi Yuta, Seino Yuki
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/71f6bc72f8bbaa06e701f8bd2562c347@oss.nttdata.com
Discussion: https://postgr.es/m/aadbfba9-e4bb-9531-6b3a-d13c31c8f4fe@oss.nttdata.com
Introduce TimestampDifferenceMilliseconds() to simplify callers
that would rather have the difference in milliseconds, instead of
the select()-oriented seconds-and-microseconds format. This gets
rid of at least one integer division per call, and it eliminates
some apparently-easy-to-mess-up arithmetic.
Two of these call sites were in fact wrong:
* pg_prewarm's autoprewarm_main() forgot to multiply the seconds
by 1000, thus ending up with a delay 1000X shorter than intended.
That doesn't quite make it a busy-wait, but close.
* postgres_fdw's pgfdw_get_cleanup_result() thought it needed to compute
microseconds not milliseconds, thus ending up with a delay 1000X longer
than intended. Somebody along the way had noticed this problem but
misdiagnosed the cause, and imposed an ad-hoc 60-second limit rather
than fixing the units. This was relatively harmless in context, because
we don't care that much about exactly how long this delay is; still,
it's wrong.
There are a few more callers of TimestampDifference() that don't
have a direct need for seconds-and-microseconds, but can't use
TimestampDifferenceMilliseconds() either because they do need
microsecond precision or because they might possibly deal with
intervals long enough to overflow 32-bit milliseconds. It might be
worth inventing another API to improve that, but that seems outside
the scope of this patch; so those callers are untouched here.
Given the fact that we are fixing some bugs, and the likelihood
that future patches might want to back-patch code that uses this
new API, back-patch to all supported branches.
Alexey Kondratov and Tom Lane
Discussion: https://postgr.es/m/3b1c053a21c07c1ed5e00be3b2b855ef@postgrespro.ru
Specifically, this blocks DECLARE ... WITH HOLD and firing of deferred
triggers within index expressions and materialized view queries. An
attacker having permission to create non-temp objects in at least one
schema could execute arbitrary SQL functions under the identity of the
bootstrap superuser. One can work around the vulnerability by disabling
autovacuum and not manually running ANALYZE, CLUSTER, REINDEX, CREATE
INDEX, VACUUM FULL, or REFRESH MATERIALIZED VIEW. (Don't restore from
pg_dump, since it runs some of those commands.) Plain VACUUM (without
FULL) is safe, and all commands are fine when a trusted user owns the
target object. Performance may degrade quickly under this workaround,
however. Back-patch to 9.5 (all supported versions).
Reviewed by Robert Haas. Reported by Etienne Stalmans.
Security: CVE-2020-25695
Move the system catalog index declarations from catalog/indexing.h to
the respective parent tables' catalog/pg_*.h files. The original
reason for having it split was that the old genbki system produced the
output in the order of the catalog files it read, so all the indexing
stuff needed to come separately. But this is no longer the case, and
keeping it together makes more sense.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/c7cc82d6-f976-75d6-2e3e-b03d2cab26bb@2ndquadrant.com
sslinfo was passing the Port->ssl member directly to OpenSSL in order
to extract information regarding the connection. This breaks the API
provided by the backend TLS implementation, as well as duplicates code
for no benefit. Rewrite to make use of the backend API as much as
possible.
Author: Daniel Gustafsson <daniel@yesql.se>
PXE_DECRYPT_FAILED exists already for decryption errors, and an
equivalent for encryption did not exist. There is one code path that
deals with such failures for OpenSSL but it used PXE_ERR_GENERIC, which
was inconsistent. This switches this code path to use the new error
PXE_ENCRYPT_FAILED instead of PXE_ERR_GENERIC, making the code used for
encryption more consistent with the decryption.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/03049139-CB7A-436E-B71B-42696D3E2EF7@yesql.se
verify_heapam() wasn't being careful to sanity-check tuple line
pointers before using them, resulting in SIGBUS on alignment-picky
architectures. Fix that, add some more test coverage.
Mark Dilger, some tweaking by me
Discussion: https://postgr.es/m/30B8E99A-2D9C-48D4-A55C-741C9D5F1563@enterprisedb.com
Change the attribute 'name' to 'slot_name' in pg_stat_replication_slots
view to make it clear and that way we will be consistent with the other
places like pg_stat_wal_receiver view where we display the same attribute.
In the passing, fix the typo in one of the macros in the related code.
Bump the catversion as we have modified the name in the catalog as well.
Reported-by: Noriyoshi Shinoda
Author: Noriyoshi Shinoda
Reviewed-by: Sawada Masahiko and Amit Kapila
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
When allocating a EVP context, it would have been possible to leak some
memory allocated directly by OpenSSL, that PostgreSQL lost track of if
the initialization of the context allocated failed. The cleanup can be
done with EVP_MD_CTX_destroy().
Note that EVP APIs exist since OpenSSL 0.9.7 and we have in the tree
equivalent implementations for older versions since ce9b75d (code
removed with 9b7cd59a as of 10~). However, in 9.5 and 9.6, the existing
code makes use of EVP_MD_CTX_destroy() and EVP_MD_CTX_create() without
an equivalent implementation when building the tree with OpenSSL 0.9.6
or older, meaning that this code is in reality broken with such versions
since it got introduced in e2838c5. As we have heard no complains about
that, it does not seem worth bothering with in 9.5 and 9.6, so I have
left that out for simplicity.
Author: Michael Paquier
Discussion: https://postgr.es/m/20201015072212.GC2305@paquier.xyz
Backpatch-through: 9.5
In theory, the second px_find_digest call in px_crypt_md5 could fail
even though the first one succeeded, since resource allocation is
required. Don't skip testing for a failure. (If one did happen,
the likely result would be a crash rather than clean recovery from
an OOM failure.)
The code's been like this all along, so back-patch to all supported
branches.
Daniel Gustafsson
Discussion: https://postgr.es/m/AA8D6FE9-4AB2-41B4-98CB-AE64BA668C03@yesql.se
Commit 32a9c0bdf introduced connection retry logic into postgres_fdw.
Previously it used goto statement for retry. This commit gets rid of that
goto from the logic to make the code simpler and easier-to-read.
When getting out of PG_CATCH() for the retry, the error state should be
cleaned up and the memory context should be reset. But commit 32a9c0bdf
forgot to do that. This commit also fixes this bug.
Previously only PQstatus()==CONNECTION_BAD was verified to detect
connection failure. But this could cause false detection in the case where
any error other than connection failure (e.g., out-of-memory) was thrown
after a broken connection was detected in libpq and CONNECTION_BAD is set.
To fix this issue, this commit changes the logic so that it also checks
the error's sqlstate is ERRCODE_CONNECTION_FAILURE.
Author: Fujii Masao
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/2943611.1602375376@sss.pgh.pa.us
A number of places were using appendStringInfo() when they could have been
using appendStringInfoString() instead. While there's no functionality
change there, it's just more efficient to use appendStringInfoString()
when no formatting is required. Likewise for some
appendStringInfoString() calls which were just appending a single char.
We can just use appendStringInfoChar() for that.
Additionally, many places were using appendPQExpBuffer() when they could
have used appendPQExpBufferStr(). Change those too.
Patch by Zhijie Hou, but further searching by me found significantly more
places that deserved the same treatment.
Author: Zhijie Hou, David Rowley
Discussion: https://postgr.es/m/cb172cf4361e4c7ba7167429070979d4@G08CNEXMBPEKD05.g08.fujitsu.local
FDWs that can perform an UPDATE/DELETE remotely using the "direct modify"
set of APIs need to access the ResultRelInfo of the target table. That's
currently available in EState.es_result_relation_info, but the next
commit will remove that field.
This commit adds a new resultRelation field in ForeignScan, to store the
target relation's RT index, and the corresponding ResultRelInfo in
ForeignScanState. The FDW's PlanDirectModify callback is expected to set
'resultRelation' along with 'operation'. The core code doesn't need them
for anything, they are for the convenience of FDW's Begin- and
IterateDirectModify callbacks.
Authors: Amit Langote, Etsuro Fujita
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqGEmiib8FLiHMhKB%2BCH5dRgHSLc5N5wnvc4kym%2BZYpQEQ%40mail.gmail.com
The test cases added by that commit were trying to test the exact number of
times a particular transaction has spilled. However, that number can vary if
any background transaction (say by autovacuum) happens in parallel to the main
transaction. So let's not try to verify the exact count.
Author: Amit Kapila
Reviewed-by: Sawada Masahiko
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
Buildfarm member lorikeet is still failing the test from commit
32a9c0bdf, but now it's down to the should-have-foreseen-it problem
that the error message isn't what the expected-output file expects.
Let's see if we can get stable results by printing just the SQLSTATE.
I believe we'll reliably see ERRCODE_CONNECTION_FAILURE, since
pgfdw_report_error() will report that for any libpq-originated error.
There may be a better way to do this, but I'd like to get the
buildfarm back to green before we discuss further improvements.
Discussion: https://postgr.es/m/E1kPc9v-0005L4-2l@gemulon.postgresql.org
Discussion: https://postgr.es/m/2621622.1602184554@sss.pgh.pa.us
In postgres_fdw, once remote connections are established, they are cached
and re-used for subsequent queries and transactions. There can be some
cases where those cached connections are unavaiable, for example,
by the restart of remote server. In these cases, previously an error was
reported and the query accessing to remote server failed if new remote
transaction failed to start because the cached connection was broken.
This commit improves postgres_fdw so that new connection is remade
if broken connection is detected when starting new remote transaction.
This is useful to avoid unnecessary failure of queries when connection is
broken but can be reestablished.
Author: Bharath Rupireddy, tweaked a bit by Fujii Masao
Reviewed-by: Ashutosh Bapat, Tatsuhito Kasahara, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACUAi23vf1WiHNar_LksM9EDOWXcbHCo-fD4Mbr1d=78YQ@mail.gmail.com
PX_OWN_ALLOC was intended as a way to disable the use of palloc(), and
over the time new palloc() or equivalent calls have been added like in
32984d8, making this extra layer losing its original purpose. This
simplifies on the way some code paths to use palloc0() rather than
palloc() followed by memset(0).
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/A5BFAA1A-B2E8-4CBC-895E-7B1B9475A527@yesql.se
You can use this to view the contents of the time to XID mapping
which the server maintains when old_snapshot_threshold != -1.
Being able to view that information may be interesting for users,
and it's definitely useful for figuring out whether the mapping
is being maintained correctly. It isn't, so that will need to be
fixed in a subsequent commit.
Patch by me, reviewed by Thomas Munro, Dilip Kumar, Hamid Akhtar.
Discussion: http://postgr.es/m/CA+TgmoY=aqf0zjTD+3dUWYkgMiNDegDLFjo+6ze=Wtpik+3XqA@mail.gmail.com
According to buildfarm member sungazer, the behavior of VACUUM can be
unstable in these tests even if we prevent autovacuum from running on
the tables in question, apparently because even a manual vacuum can
behave differently depending on whether anything else is running that
holds back the global xmin. So use a temporary table instead, which
as of commit a7212be8b9 enables
vacuuming using a more aggressive cutoff.
This approach can't be used for the regression test that involves a
materialized view, but that test doesn't run vacuum, so it shouldn't
be prone to this particular failure mode.
Analysis by Tom Lane. Patch by Ashutosh Sharma and me.
Discussion: http://postgr.es/m/665524.1599948007@sss.pgh.pa.us
This feature has been a thorn in our sides for a long time, causing
many grammatical ambiguity problems. It doesn't seem worth the
pain to continue to support it, so remove it.
There are some follow-on improvements we can make in the grammar,
but this commit only removes the bare minimum number of productions,
plus assorted backend support code.
Note that pg_dump and psql continue to have full support, since
they may be used against older servers. However, pg_dump warns
about postfix operators. There is also a check in pg_upgrade.
Documentation-wise, I (tgl) largely removed the "left unary"
terminology in favor of saying "prefix operator", which is
a more standard and IMO less confusing term.
I included a catversion bump, although no initial catalog data
changes here, to mark the boundary at which oprkind = 'r'
stopped being valid in pg_operator.
Mark Dilger, based on work by myself and Robert Haas;
review by John Naylor
Discussion: https://postgr.es/m/38ca86db-42ab-9b48-2902-337a0d6b8311@2ndquadrant.com
The "!" operator is our only built-in postfix operator. Remove it,
on the way to removal of grammar support for postfix operators.
There is also a "!!" prefix operator, but since it's been marked
deprecated for most of its existence, we might as well remove it too.
Also zap the SQL alias function numeric_fac(), which seems to have
equally little reason to live.
Mark Dilger, based on work by myself and Robert Haas;
review by John Naylor
Discussion: https://postgr.es/m/38ca86db-42ab-9b48-2902-337a0d6b8311@2ndquadrant.com
Commit d114cc53 overlooked the fact that pg_upgrade'd B-Tree indexes
have leaf page high keys whose offset numbers do not match the one from
the copy of the tuple one level up (the copy stored with a downlink for
leaf page's right sibling page). This led to false positive reports of
corruption from bt_index_parent_check() when it was called to verify a
pg_upgrade'd index.
To fix, skip comparing the offset number on pg_upgrade'd B-Tree indexes.
Author: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Andrew Bille <andrewbille@gmail.com>
Diagnosed-By: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Bug: #16619
Discussion: https://postgr.es/m/16619-aaba10f83fdc1c3c@postgresql.org
Backpatch: 13-, where child check was enhanced.
We were decoding empty transactions via streaming APIs added in commit
45fdc9738b even when the user used the option 'skip-empty-xacts'. The APIs
makes no effort to skip empty xacts under the assumption that we will
never try to stream such transactions. However, that is not true because
we can pick to stream a transaction that has change messages for
REORDER_BUFFER_CHANGE_INTERNAL_SNAPSHOT and we don't send such messages to
downstream rather they are just to update the internal state. So, we need
to skip such xacts when plugin uses the option 'skip-empty-xacts'.
Diagnosed-By: Amit Kapila
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1+OqgFNZkf7=ETe_y5ntjgDk3T0wcdkd4Sot_u1hySGfw@mail.gmail.com
Sometimes it happens that the visibility information for a tuple
becomes corrupted, either due to bugs in the database software or
external factors. Provide a function heap_force_kill() that can
be used to truncate such dead tuples to dead line pointers, and
a function heap_force_freeze() that can be used to overwrite the
visibility information in such a way that the tuple becomes
all-visible.
These functions are unsafe, in that you can easily use them to
corrupt a database that was not previously corrupted, and you can
use them to further corrupt an already-corrupted database or to
destroy data. The documentation accordingly cautions against
casual use. However, in some cases they permit recovery of data
that would otherwise be very difficult to recover, or to allow a
system to continue to function when it would otherwise be difficult
to do so.
Because we may want to add other functions for performing other
kinds of surgery in the future, the new contrib module is called
pg_surgery rather than something specific to these functions. I
proposed back-patching this so that it could be more easily used
by people running existing releases who are facing these kinds of
problems, but that proposal did not attract enough support, so
no back-patch for now.
Ashutosh Sharma, reviewed and tested by Andrey M. Borodin,
M. Beena Emerson, Masahiko Sawada, Rajkumar Raghuwanshi,
Asim Praveen, and Mark Dilger, and somewhat revised by me.
Discussion: http://postgr.es/m/CA+TgmoZW1fsU-QUNCRUQMGUygBDPVeOTLCqRdQZch=EYZnctSA@mail.gmail.com
Until now, REINDEX was not able to work with partitioned tables and
indexes, forcing users to reindex partitions one by one. This extends
REINDEX INDEX and REINDEX TABLE so as they can accept a partitioned
index and table in input, respectively, to reindex all the partitions
assigned to them with physical storage (foreign tables, partitioned
tables and indexes are then discarded).
This shares some logic with schema and database REINDEX as each
partition gets processed in its own transaction after building a list of
relations to work on. This choice has the advantage to minimize the
number of invalid indexes to one partition with REINDEX CONCURRENTLY in
the event a cancellation or failure in-flight, as the only indexes
handled at once in a single REINDEX CONCURRENTLY loop are the ones from
the partition being working on.
Isolation tests are added to emulate some cases I bumped into while
developing this feature, particularly with the concurrent drop of a
leaf partition reindexed. However, this is rather limited as LOCK would
cause REINDEX to block in the first transaction building the list of
partitions.
Per its multi-transaction nature, this new flavor cannot run in a
transaction block, similarly to REINDEX SCHEMA, SYSTEM and DATABASE.
Author: Justin Pryzby, Michael Paquier
Reviewed-by: Anastasia Lubennikova
Discussion: https://postgr.es/m/db12e897-73ff-467e-94cb-4af03705435f.adger.lj@alibaba-inc.com
This patch started out with the goal of harmonizing various arbitrary
limits on password length, but after awhile a better idea emerged:
let's just get rid of those fixed limits.
recv_password_packet() has an arbitrary limit on the packet size,
which we don't really need, so just drop it. (Note that this doesn't
really affect anything for MD5 or SCRAM password verification, since
those will hash the user's password to something shorter anyway.
It does matter for auth methods that require a cleartext password.)
Likewise remove the arbitrary error condition in pg_saslprep().
The remaining limits are mostly in client-side code that prompts
for passwords. To improve those, refactor simple_prompt() so that
it allocates its own result buffer that can be made as big as
necessary. Actually, it proves best to make a separate routine
pg_get_line() that has essentially the semantics of fgets(), except
that it allocates a suitable result buffer and hence will never
return a truncated line. (pg_get_line has a lot of potential
applications to replace randomly-sized fgets buffers elsewhere,
but I'll leave that for another patch.)
I built pg_get_line() atop stringinfo.c, which requires moving
that code to src/common/; but that seems fine since it was a poor
fit for src/port/ anyway.
This patch is mostly mine, but it owes a good deal to Nathan Bossart
who pressed for a solution to the password length problem and
created a predecessor patch. Also thanks to Peter Eisentraut and
Stephen Frost for ideas and discussion.
Discussion: https://postgr.es/m/09512C4F-8CB9-4021-B455-EF4C4F0D55A0@amazon.com
Historically, we've considered the state with relpages and reltuples
both zero as indicating that we do not know the table's tuple density.
This is problematic because it's impossible to distinguish "never yet
vacuumed" from "vacuumed and seen to be empty". In particular, a user
cannot use VACUUM or ANALYZE to override the planner's normal heuristic
that an empty table should not be believed to be empty because it is
probably about to get populated. That heuristic is a good safety
measure, so I don't care to abandon it, but there should be a way to
override it if the table is indeed intended to stay empty.
Hence, represent the initial state of ignorance by setting reltuples
to -1 (relpages is still set to zero), and apply the minimum-ten-pages
heuristic only when reltuples is still -1. If the table is empty,
VACUUM or ANALYZE (but not CREATE INDEX) will override that to
reltuples = relpages = 0, and then we'll plan on that basis.
This requires a bunch of fiddly little changes, but we can get rid of
some ugly kluges that were formerly needed to maintain the old definition.
One notable point is that FDWs' GetForeignRelSize methods will see
baserel->tuples = -1 when no ANALYZE has been done on the foreign table.
That seems like a net improvement, since those methods were formerly
also in the dark about what baserel->tuples = 0 really meant. Still,
it is an API change.
I bumped catversion because code predating this change would get confused
by seeing reltuples = -1.
Discussion: https://postgr.es/m/F02298E0-6EF4-49A1-BCB6-C484794D9ACC@thebuild.com
When calling cracklib to check the password, the diagnostic from
cracklib was thrown away. This would hide essential information such
as no dictionary being installed. Change this to show the cracklib
error message using errdetail_log().
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/f7266133-618a-0adc-52ef-f43c78806b0e%402ndquadrant.com
REPLICA IDENTITY USING INDEX behaves the same way as NOTHING if the
associated index is dropped, even if there is a primary key that could
be used as a fallback for the changes generated. There have never been
any tests to cover such scenarios, so this commit closes the gap.
Author: Michael Paquier
Reviewed-by: Masahiko Sawada, Rahila Syed, Euler Taveira
Discussion: https://postgr.es/m/20200522035028.GO2355@paquier.xyz
xact.h included utils/datetime.h, which cannot be used in the frontend
(it includes fmgr.h, which needs Datum). But xact.h only needs the
definition of TimestampTz from it, which is available directly in
datatypes/timestamp.h. Change xact.h to include that instead of
utils/datetime.h, so that it can be used in client programs.
Since commit 865f14a2d made "=>" unusable as an operator name,
it's been impossible either to install hstore 1.0 or to execute
this update script. There's not much point in continuing
to ship it.
Discussion: https://postgr.es/m/653936.1597431032@sss.pgh.pa.us
Upstream SELinux has recently marked security_context_t as officially
deprecated, causing warnings with -Wdeprecated-declarations. This is
considered as legacy code for some time now by upstream as
security_context_t got removed from most of the code tree during the
development of 2.3 back in 2014.
This removes all the references to security_context_t in sepgsql/ to be
consistent with SELinux, fixing the warnings. Note that this does not
impact the minimum version of libselinux supported.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20200813012735.GC11663@paquier.xyz
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
They are equivalent, except that StrNCpy() zero-fills the entire
destination buffer instead of providing just one trailing zero. For
all but a tiny number of callers, that's just overhead rather than
being desirable.
Remove StrNCpy() as it is now unused.
In some cases, namestrcpy() is the more appropriate function to use.
While we're here, simplify the API of namestrcpy(): Remove the return
value, don't check for NULL input. Nothing was using that anyway.
Also, remove a few unused name-related functions.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/44f5e198-36f6-6cdb-7fa9-60e34784daae%402ndquadrant.com
Any libpq client can use the header. Clients include backend components
postgres_fdw, dblink, and logical replication apply worker. Back-patch
to v10, because another fix needs this. In released branches, just copy
the header and keep the original.
Hostile objects located within the installation-time search_path could
capture references in an extension's installation or upgrade script.
If the extension is being installed with superuser privileges, this
opens the door to privilege escalation. While such hazards have existed
all along, their urgency increases with the v13 "trusted extensions"
feature, because that lets a non-superuser control the installation path
for a superuser-privileged script. Therefore, make a number of changes
to make such situations more secure:
* Tweak the construction of the installation-time search_path to ensure
that references to objects in pg_catalog can't be subverted; and
explicitly add pg_temp to the end of the path to prevent attacks using
temporary objects.
* Disable check_function_bodies within installation/upgrade scripts,
so that any security gaps in SQL-language or PL-language function bodies
cannot create a risk of unwanted installation-time code execution.
* Adjust lookup of type input/receive functions and join estimator
functions to complain if there are multiple candidate functions. This
prevents capture of references to functions whose signature is not the
first one checked; and it's arguably more user-friendly anyway.
* Modify various contrib upgrade scripts to ensure that catalog
modification queries are executed with secure search paths. (These
are in-place modifications with no extension version changes, since
it is the update process itself that is at issue, not the end result.)
Extensions that depend on other extensions cannot be made fully secure
by these methods alone; therefore, revert the "trusted" marking that
commit eb67623c9 applied to earthdistance and hstore_plperl, pending
some better solution to that set of issues.
Also add documentation around these issues, to help extension authors
write secure installation scripts.
Patch by me, following an observation by Andres Freund; thanks
to Noah Misch for review.
Security: CVE-2020-14350
Since commit efc77cf5f, an indexed query using <@ has required a
full-index scan, so that it actually performs worse than a plain seqscan
would do. As I noted at the time, we'd be better off to not treat <@ as
being indexable by such indexes at all; and that's what this patch does.
It would have been difficult to remove these opclass members without
dropping the whole opclass before commit 9f9682783 fixed GiST opclass
member dependency rules, but now it's quite simple, so let's do it.
I left the existing support code in place for the time being, with
comments noting it's now unreachable. At some point, perhaps we should
remove that code in favor of throwing an error telling people to upgrade
the extension version.
Discussion: https://postgr.es/m/2176979.1596389859@sss.pgh.pa.us
Discussion: https://postgr.es/m/458.1565114141@sss.pgh.pa.us
Teach contrib/amcheck's bt_index_check() function to check agreement
between siblings links. The left sibling's right link should point to a
right sibling page whose left link points back to the same original left
sibling. This extends a check that bt_index_parent_check() always
performed to bt_index_check().
This is the first time amcheck has been taught to perform buffer lock
coupling, which we have explicitly avoided up until now. The sibling
link check tends to catch a lot of real world index corruption with
little overhead, so it seems worth accepting the complexity. Note that
the new lock coupling logic would not work correctly on replica servers
without the changes made by commits 0a7d771f and 9a9db08a (there could
be false positives without those changes).
Author: Andrey Borodin, Peter Geoghegan
Discussion: https://postgr.es/m/0EB0CFA8-CBD8-4296-8049-A2C0F28FAE8C@yandex-team.ru
Commit 7259736a6e added the capability to stream changes in ReorderBuffer
which has some tests to test the streaming mode. It is quite possible that
while this test is running a parallel transaction could be logged by
autovacuum. Such a transaction won't perform any insert/update/delete to
non-catalog tables so will be shown as an empty transaction. Fix it by
skipping the empty transactions during this test.
Per report by buildfarm.
Instead of serializing the transaction to disk after reaching the
logical_decoding_work_mem limit in memory, we consume the changes we have
in memory and invoke stream API methods added by commit 45fdc9738b.
However, sometimes if we have incomplete toast or speculative insert we
spill to the disk because we can't generate the complete tuple and stream.
And, as soon as we get the complete tuple we stream the transaction
including the serialized changes.
We can do this incremental processing thanks to having assignments
(associating subxact with toplevel xacts) in WAL right away, and
thanks to logging the invalidation messages at each command end. These
features are added by commits 0bead9af48 and c55040ccd0 respectively.
Now that we can stream in-progress transactions, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We handle such failures by returning ERRCODE_TRANSACTION_ROLLBACK
sqlerrcode from system table scan APIs to the backend or WALSender
decoding a specific uncommitted transaction. The decoding logic on the
receipt of such a sqlerrcode aborts the decoding of the current
transaction and continue with the decoding of other transactions.
We have ReorderBufferTXN pointer in each ReorderBufferChange by which we
know which xact it belongs to. The output plugin can use this to decide
which changes to discard in case of stream_abort_cb (e.g. when a subxact
gets discarded).
We also provide a new option via SQL APIs to fetch the changes being
streamed.
Author: Dilip Kumar, Tomas Vondra, Amit Kapila, Nikhil Sontakke
Reviewed-by: Amit Kapila, Kuntal Ghosh, Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
This will be helpful if it ever proves necessary to revoke an opclass's
support for deduplication.
Backpatch: 13-, where nbtree deduplication was introduced.
Currently, page unlink leaves remaining items "as is", but replay of
corresponding WAL-record re-initializes page leaving it with no items.
For the sake of consistency, this commit makes primary delete all the items
during page unlink as well.
Thanks to this change, we now don't mask contents of deleted btree page for
WAL consistency checking.
Discussion: https://postgr.es/m/CAPpHfdt_OTyQpXaPJcWzV2N-LNeNJseNB-K_A66qG%3DL518VTFw%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Peter Geoghegan
This allows AM-specific knowledge to be applied during creation of
pg_amop and pg_amproc entries. Specifically, the AM knows better than
core code which entries to consider as required or optional. Giving
the latter entries the appropriate sort of dependency allows them to
be dropped without taking out the whole opclass or opfamily; which
is something we'd like to have to correct obsolescent entries in
extensions.
This callback also opens the door to performing AM-specific validity
checks during opclass creation, rather than hoping than an opclass
developer will remember to test with "amvalidate". For the most part
I've not actually added any such checks yet; that can happen in a
follow-on patch. (Note that we shouldn't remove any tests from
"amvalidate", as those are still needed to cross-check manually
constructed entries in the initdb data. So adding tests to
"amadjustmembers" will be somewhat duplicative, but it seems like
a good idea anyway.)
Patch by me, reviewed by Alexander Korotkov, Hamid Akhtar, and
Anastasia Lubennikova.
Discussion: https://postgr.es/m/4578.1565195302@sss.pgh.pa.us
Commit eba77534 fixed an amcheck false positive bug involving
inconsistencies in TOAST input state between table and index. A test
case was added that verified that such an inconsistency didn't result in
a spurious corruption related error.
Test coverage from the test was accidentally lost by commit 501e41dd,
which propagated ALTER TABLE ... SET STORAGE attstorage state to
indexes. This broke the test because the test specifically relied on
attstorage not being propagated. This artificially forced there to be
index tuples whose datums were equivalent to the datums in the heap
without the datums actually being bitwise equal.
Fix this by updating pg_attribute directly instead. Commit 501e41dd
made similar changes to a test_decoding TOAST-related test case which
made the same assumption, but overlooked the amcheck test case.
Backpatch: 11-, just like commit eba77534 (and commit 501e41dd).
Avoid repeatedly calling lseek(SEEK_END) during recovery by caching
the size of each fork. For now, we can't use the same technique in
other processes, because we lack a shared invalidation mechanism.
Do this by generalizing the pre-existing caching used by FSM and VM
to support all forks.
Discussion: https://postgr.es/m/CAEepm%3D3SSw-Ty1DFcK%3D1rU-K6GSzYzfdD4d%2BZwapdN7dTa6%3DnQ%40mail.gmail.com
This commit makes pg_stat_statements track the total number
of rows retrieved or affected by CREATE TABLE AS, SELECT INTO,
CREATE MATERIALIZED VIEW and FETCH commands.
Suggested-by: Pascal Legrand
Author: Fujii Masao
Reviewed-by: Asif Rehman
Discussion: https://postgr.es/m/1584293755198-0.post@n3.nabble.com
This adds seven methods to the output plugin API, adding support for
streaming changes of large in-progress transactions.
* stream_start
* stream_stop
* stream_abort
* stream_commit
* stream_change
* stream_message
* stream_truncate
Most of this is a simple extension of the existing methods, with
the semantic difference that the transaction (or subtransaction)
is incomplete and may be aborted later (which is something the
regular API does not really need to deal with).
This also extends the 'test_decoding' plugin, implementing these
new stream methods.
The stream_start/start_stop are used to demarcate a chunk of changes
streamed for a particular toplevel transaction.
This commit simply adds these new APIs and the upcoming patch to "allow
the streaming mode in ReorderBuffer" will use these APIs.
Author: Tomas Vondra, Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma and Mahendra Singh Thalor
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
A compressed stream may end with an empty packet. In this case
decompression finishes before reading the empty packet and the
remaining stream packet causes a failure in reading the following
data. This commit makes sure to consume such extra data, avoiding a
failure when decompression the data. This corner case was reproducible
easily with a data length of 16kB, and existed since e94dd6a. A cheap
regression test is added to cover this case based on a random,
incompressible string.
The first attempt of this patch has allowed to find an older failure
within the compression logic of pgcrypto, fixed by b9b6105. This
involved SLES 15 with z390 where a custom flavor of libz gets used.
Bonus thanks to Mark Wong for providing access to the specific
environment.
Reported-by: Frank Gagnepain
Author: Kyotaro Horiguchi, Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/16476-692ef7b84e5fb893@postgresql.org
Backpatch-through: 9.5
contrib/pgcrypto mishandled the case where deflate() does not consume
all of the offered input on the first try. It reset the next_in pointer
to the start of the input instead of leaving it alone, causing the wrong
data to be fed to the next deflate() call.
This has been broken since pgcrypto was committed. The reason for the
lack of complaints seems to be that it's fairly hard to get stock zlib
to not consume all the input, so long as the output buffer is big enough
(which it normally would be in pgcrypto's usage; AFAICT the input is
always going to be packetized into packets no larger than ZIP_OUT_BUF).
However, IBM's zlibNX implementation for AIX evidently will do it
in some cases.
I did not add a test case for this, because I couldn't find one that
would fail with stock zlib. When we put back the test case for
bug #16476, that will cover the zlibNX situation well enough.
While here, write deflate()'s second argument as Z_NO_FLUSH per its
API spec, instead of hard-wiring the value zero.
Per buildfarm results and subsequent investigation.
Discussion: https://postgr.es/m/16476-692ef7b84e5fb893@postgresql.org
This reverts commit 9e10898, after finding out that buildfarm members
running SLES 15 on z390 complain on the compression and decompression
logic of the new test: pipistrelles, barbthroat and steamerduck.
Those hosts are visibly using hardware-specific changes to improve zlib
performance, requiring more investigation.
Thanks to Tom Lane for the discussion.
Discussion: https://postgr.es/m/20200722093749.GA2564@paquier.xyz
Backpatch-through: 9.5
Add infinities that behave the same as they do in the floating-point
data types. Aside from any intrinsic usefulness these may have,
this closes an important gap in our ability to convert floating
values to numeric and/or replace float-based APIs with numeric.
The new values are represented by bit patterns that were formerly
not used (although old code probably would take them for NaNs).
So there shouldn't be any pg_upgrade hazard.
Patch by me, reviewed by Dean Rasheed and Andrew Gierth
Discussion: https://postgr.es/m/606717.1591924582@sss.pgh.pa.us
A compressed stream may end with an empty packet, and PGP decompression
finished before reading this empty packet in the remaining stream. This
caused a failure in pgcrypto, handling this case as corrupted data.
This commit makes sure to consume such extra data, avoiding a failure
when decompression the entire stream. This corner case was reproducible
with a data length of 16kB, and existed since its introduction in
e94dd6a. A cheap regression test is added to cover this case.
Thanks to Jeff Janes for the extra investigation.
Reported-by: Frank Gagnepain
Author: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/16476-692ef7b84e5fb893@postgresql.org
Backpatch-through: 9.5
One change for getObjectIdentity() has been missed in 2a10fdc, causing
the module to not compile properly. This was actually the only problem,
and it happens that it is easy enough to check the compilation of the
module on Debian after installing libselinux1-dev.
Per buildfarm member rhinoceros.
When using the following functions, users could see various types of
errors of the type "cache lookup failed for OID XXX" with elog(), that
can only be used for internal errors:
* pg_describe_object()
* pg_identify_object()
* pg_identify_object_as_address()
The set of APIs managing object addresses for all object types are made
smarter by gaining a new argument "missing_ok" that allows any caller to
control if an error is raised or not on an undefined object. The SQL
functions listed above are changed to handle the case where an object is
missing.
Regression tests are added for all object types for the cases where
these are undefined. Before this commit, these cases failed with cache
lookup errors, and now they basically return NULL (minus the name of the
object type requested).
Author: Michael Paquier
Reviewed-by: Aleksander Alekseev, Dmitry Dolgov, Daniel Gustafsson,
Álvaro Herrera, Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
read_binary_file(), used by SQL functions pg_read_file() and friends,
uses stat to determine file length to read, when not passed an explicit
length as an argument. This is problematic, for example, if the file
being read is a virtual file with a stat-reported length of zero.
Arrange to read until EOF, or StringInfo data string lenth limit, is
reached instead.
Original complaint and patch by me, with significant review, corrections,
advice, and code optimizations by Tom Lane. Backpatched to v11. Prior to
that only paths relative to the data and log dirs were allowed for files,
so no "zero length" files were reachable anyway.
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/flat/969b8d82-5bb2-5fa8-4eb1-f0e685c5d736%40joeconway.com
Backpatch-through: 11
Since v13 pg_stat_statements is allowed to track the planning time of
statements when track_planning option is enabled. Its default was on.
But this feature could cause more terrible spinlock contentions in
pg_stat_statements. As a result of this, Robins Tharakan reported that
v13 beta1 showed ~45% performance drop at high DB connection counts
(when compared with v12.3) during fully-cached SELECT-only test using
pgbench.
To avoid this performance regression by the default setting,
this commit changes default of pg_stat_statements.track_planning to off.
Back-patch to v13 where pg_stat_statements.track_planning was introduced.
Reported-by: Robins Tharakan
Author: Fujii Masao
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/2895b53b033c47ccb22972b589050dd9@EX13D05UWC001.ant.amazon.com
TOAST tables have a visibility map and a free space map, so they can
be supported by pgstattuple_approx just fine.
Add test cases to show how various pgstattuple functions accept TOAST
tables. Also add similar tests to pg_visibility, which already
accepted TOAST tables correctly but had no test coverage for them.
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/27c4496a-02b9-dc87-8f6f-bddbef54e0fe@2ndquadrant.com
Since %c only passes a C "char" to printf, it's incapable of dealing
with multibyte characters. Passing just the first byte of such a
character leads to an output string that is visibly not correctly
encoded, resulting in undesirable behavior such as encoding conversion
failures while sending error messages to clients.
We've lived with this issue for a long time because it was inconvenient
to avoid in a portable fashion. However, now that we always use our own
snprintf code, it's reasonable to use the %.*s format to print just one
possibly-multibyte character in a string. (We previously avoided that
obvious-looking answer in order to work around glibc's bug #6530, cf
commits 54cd4f045 and ed437e2b2.)
Hence, run around and fix a bunch of places that used %c to report
a character found in a user-supplied string. For simplicity, I did
not touch places that were emitting non-user-facing debug messages,
or reporting catalog data that should always be ASCII. (It's also
unclear how useful this approach could be in frontend code, where
it's less certain that we know what encoding we're dealing with.)
In passing, improve a couple of poorly-written error messages in
pageinspect/heapfuncs.c.
This is a longstanding issue, but I'm hesitant to back-patch because
of the impact on translatable message strings. In any case this fix
would not work reliably before v12.
Tom Lane and Quan Zongliang
Discussion: https://postgr.es/m/a120087c-4c88-d9d4-1ec5-808d7a7f133d@gmail.com
SQL:1999 had syntax
SUBSTRING(text FROM pattern FOR escapechar)
but this was replaced in SQL:2003 by the more clear
SUBSTRING(text SIMILAR pattern ESCAPE escapechar)
but this was never implemented in PostgreSQL. This patch adds that
new syntax as an alternative in the parser, and updates documentation
and tests to indicate that this is the preferred alternative now.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/flat/a15db31c-d0f8-8ce0-9039-578a31758adb%402ndquadrant.com
This patch removes the hardcoded check for superuser privileges when
executing replication origin functions. Instead, execution is revoked
from public, meaning that those functions can be executed by a superuser
and that access to them can be granted.
Author: Martín Marqués
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Masahiko Sawada
Discussion: https:/postgr.es/m/CAPdiE1xJMZOKQL3dgHMUrPqysZkgwzSMXETfKkHYnBAB7-0VRQ@mail.gmail.com
Commit 5e0928005 changed the planner so that, instead of blindly using
DEFAULT_COLLATION_OID when invoking operators for selectivity estimation,
it would use the collation of the column whose statistics we're
considering. This was recognized as still being not quite the right
thing, but it seemed like a good incremental improvement. However,
shortly thereafter we introduced nondeterministic collations, and that
creates cases where operators can fail if they're passed the wrong
collation. We don't want planning to fail in cases where the query itself
would work, so this means that we *must* use the query's collation when
invoking operators for estimation purposes.
The only real problem this creates is in ineq_histogram_selectivity, where
the binary search might produce a garbage answer if we perform comparisons
using a different collation than the column's histogram is ordered with.
However, when the query's collation is significantly different from the
column's default collation, the estimate we previously generated would be
pretty irrelevant anyway; so it's not clear that this will result in
noticeably worse estimates in practice. (A follow-on patch will improve
this situation in HEAD, but it seems too invasive for back-patch.)
The patch requires changing the signatures of mcv_selectivity and allied
functions, which are exported and very possibly are used by extensions.
In HEAD, I just did that, but an API/ABI break of this sort isn't
acceptable in stable branches. Therefore, in v12 the patch introduces
"mcv_selectivity_ext" and so on, with signatures matching HEAD, and makes
the old functions into wrappers that assume DEFAULT_COLLATION_OID should
be used. That does not match the prior behavior, but it should avoid risk
of failure in most cases. (In practice, I think most extension datatypes
aren't collation-aware, so the change probably doesn't matter to them.)
Per report from James Lucas. Back-patch to v12 where the problem was
introduced.
Discussion: https://postgr.es/m/CAAFmbbOvfi=wMM=3qRsPunBSLb8BFREno2oOzSBS=mzfLPKABw@mail.gmail.com
Commit 1f39bce021 added disk-based hash aggregation, which may spill
incoming tuples to disk. It however did not request projection to make
the tuples as narrow as possible, which may mean having to spill much
more data than necessary (increasing I/O, pushing other stuff from page
cache, etc.).
This adds CP_SMALL_TLIST in places that may use hash aggregation - we do
that only for AGG_HASHED. It's unnecessary for AGG_SORTED, because that
either uses explicit Sort (which already does projection) or pre-sorted
input (which does not need spilling to disk).
Author: Tomas Vondra
Reviewed-by: Jeff Davis
Discussion: https://postgr.es/m/20200519151202.u2p2gpiawoaznsv2%40development
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
amcheck expects at least hikey to always exist on leaf page even if it is
deleted page. But replica reinitializes page during replay of page deletion,
causing deleted page to have no items. Thus, replay of page deletion can
cause an error in concurrent amcheck run.
This commit relaxes amcheck expectation making it tolerate deleted page with
no items.
Reported-by: Konstantin Knizhnik
Discussion: https://postgr.es/m/CAPpHfdt_OTyQpXaPJcWzV2N-LNeNJseNB-K_A66qG%3DL518VTFw%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Peter Geoghegan
Backpatch-through: 11
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
In commit 33e05f89c5, we have added the option to display WAL usage
statistics in Explain and auto_explain. The display format used two spaces
between each field which is inconsistent with Buffer usage statistics which
is using one space between each field. Change the format to make WAL usage
statistics consistent with Buffer usage statistics.
This commit also changed the usage of "full page writes" to
"full page images" for WAL usage statistics to make it consistent with
other parts of code and docs.
Author: Julien Rouhaud, Amit Kapila
Reviewed-by: Justin Pryzby, Kyotaro Horiguchi and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
Add a test case to contrib/amcheck that creates coverage of code paths
that are used to verify posting list tuples (tuples created when
deduplication merges together existing tuples to avoid a leaf page
split).
Writing a trailing semicolon in a macro is almost never the right thing,
because you almost always want to write a semicolon after each macro
call instead. (Even if there was some reason to prefer not to, pgindent
would probably make a hash of code formatted that way; so within PG the
rule should basically be "don't do it".) Thus, if we have a semi inside
the macro, the compiler sees "something;;". Much of the time the extra
empty statement is harmless, but it could lead to mysterious syntax
errors at call sites. In perhaps an overabundance of neatnik-ism, let's
run around and get rid of the excess semicolons whereever possible.
The only thing worse than a mysterious syntax error is a mysterious
syntax error that only happens in the back branches; therefore,
backpatch these changes where relevant, which is most of them because
most of these mistakes are old. (The lack of reported problems shows
that this is largely a hypothetical issue, but still, it could bite
us in some future patch.)
John Naylor and Tom Lane
Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com
The libpq parameters ssl{max|min}protocolversion are renamed to use
underscores, to become ssl_{max|min}_protocol_version. The related
environment variables still use the names introduced in commit ff8ca5f
that added the feature.
Per complaint from Peter Eisentraut (this was also mentioned by me in
the original patch review but the issue got discarded).
Author: Daniel Gustafsson
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/b319e449-318d-e691-4997-1327e166fcc4@2ndquadrant.com
Lack of these checks could cause visible misbehavior, including
assertion failures. This was missed in commit c655077639, whereby
restart_lsn becomes invalid when the size limit is exceeded.
Also reword some existing error messages, and add errdetail(), so that
the reported errors all match in spirit.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200408.093710.447591748588426656.horikyota.ntt@gmail.com
fixup_whole_row_references() did the wrong thing with a dropped column,
resulting in a commit-time warning about a cache reference leak.
I (tgl) added a test case exercising this, but back-patched the test
only as far as v10; the patch didn't apply cleanly to 9.6 and it
didn't seem worth the trouble to adapt it. The bug is pretty old
though, so apply the code change all the way back.
Michael Luo, with cosmetic improvements by me
Discussion: https://postgr.es/m/BYAPR08MB5606D1453D7F50E2AF4D2FD29AD80@BYAPR08MB5606.namprd08.prod.outlook.com
An nbtree split point can be thought of as a point between two adjoining
tuples from an imaginary version of the page being split that includes
the incoming/new item (in addition to the items that really are on the
page). These adjoining tuples are called the lastleft and firstright
tuples.
The variables that represent split points contained a field called
firstright, which is an offset number of the first data item from the
original page that goes on the new right page. The corresponding tuple
from origpage was usually the same thing as the actual firstright tuple,
but not always: the firstright tuple is sometimes the new/incoming item
instead. This situation seems unnecessarily confusing.
Make things clearer by renaming the origpage offset returned by
_bt_findsplitloc() to "firstrightoff". We now have a firstright tuple
and a firstrightoff offset number which are comparable to the
newitem/lastleft tuples and the newitemoff/lastleftoff offset numbers
respectively. Also make sure that we are consistent about how we
describe nbtree page split point state.
Push the responsibility for dealing with pg_upgrade'd !heapkeyspace
indexes down to lower level code, relieving _bt_split() from dealing
with it directly. This means that we always have a palloc'd left page
high key on the leaf level, no matter what. This enables simplifying
some of the code (and code comments) within _bt_split().
Finally, restructure the page split code to make it clearer why suffix
truncation (which only takes place during leaf page splits) is
completely different to the first data item truncation that takes place
during internal page splits. Tuples are marked as having fewer
attributes stored in both cases, and the firstright tuple is truncated
in both cases, so it's easy to imagine somebody missing the distinction.
We've had a mixture of the warnings pragma, the -w switch on the shebang
line, and no warnings at all. This patch removes the -w swicth and add
the warnings pragma to all perl sources missing it. It raises the
severity of the TestingAndDebugging::RequireUseWarnings perlcritic
policy to level 5, so that we catch any future violations.
Discussion: https://postgr.es/m/20200412074245.GB623763@rfd.leadboat.com
Add a DEBUG1 message indicating that verification of the index structure
is underway. Also reduce the severity level of the existing "tree
level" debug message to DEBUG1. It should never have been made DEBUG2.
Any B-Tree index with more than a couple of levels will generally also
have so many pages that the per-page DEBUG2 messages will become
completely unmanageable.
In passing, add a new "Tip" to the docs that advises users that run into
corruption that the debug messages might provide useful additional
context.
Commit d2d8a229bc introduced Incremental Sort, but it was considered
only in create_ordered_paths() as an alternative to regular Sort. There
are many other places that require sorted input and might benefit from
considering Incremental Sort too.
This patch modifies a number of those places, but not all. The concern
is that just adding Incremental Sort to any place that already adds
Sort may increase the number of paths considered, negatively affecting
planning time, without any benefit. So we've taken a more conservative
approach, based on analysis of which places do affect a set of queries
that did seem practical. This means some less common queries may not
benefit from Incremental Sort yet.
Author: Tomas Vondra
Reviewed-by: James Coleman
Discussion: https://postgr.es/m/CAPpHfds1waRZ=NOmueYq0sx1ZSCnt+5QJvizT8ndT2=etZEeAQ@mail.gmail.com
The txid_XXX family of fmgr functions exposes 64 bit transaction IDs to
users as int8. Now that we have an SQL type xid8 for FullTransactionId,
define a new set of functions including pg_current_xact_id() and
pg_current_snapshot() based on that. Keep the old functions around too,
for now.
It's a bit sneaky to use the same C functions for both, but since the
binary representation is identical except for the signedness of the
type, and since older functions are the ones using the wrong signedness,
and since we'll presumably drop the older ones after a reasonable period
of time, it seems reasonable to switch to FullTransactionId internally
and share the code for both.
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Takao Fujii <btfujiitkp@oss.nttdata.com>
Reviewed-by: Yoshikazu Imai <imai.yoshikazu@fujitsu.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20190725000636.666m5mad25wfbrri%40alap3.anarazel.de
This commit adds a new option WAL similar to existing option BUFFERS in the
EXPLAIN command. This option allows to include information on WAL record
generation added by commit df3b181499 in EXPLAIN output.
This also allows the WAL usage information to be displayed via
the auto_explain module. A new parameter auto_explain.log_wal controls
whether WAL usage statistics are printed when an execution plan is logged.
This parameter has no effect unless auto_explain.log_analyze is enabled.
Author: Julien Rouhaud
Reviewed-by: Dilip Kumar and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
This commit adds three new columns in pg_stat_statements output to
display WAL usage statistics added by commit df3b181499.
This commit doesn't bump the version of pg_stat_statements as the
same is done for this release in commit 17e0328224.
Author: Kirill Bychik and Julien Rouhaud
Reviewed-by: Julien Rouhaud, Fujii Masao, Dilip Kumar and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
contrib/lo's lo_manage() thought it could use
trigdata->tg_trigger->tgname in its error message about
not being called as a trigger. That naturally led to a core dump.
unique_key_recheck() figured it could Assert that fcinfo->context
is a TriggerData node in advance of having checked that it's
being called as a trigger. That's harmless in production builds,
and perhaps not that easy to reach in any case, but it's logically
wrong.
The first of these per bug #16340 from William Crowell;
the second from manual inspection of other CALLED_AS_TRIGGER
call sites.
Back-patch the lo.c change to all supported branches, the
other to v10 where the thinko crept in.
Discussion: https://postgr.es/m/16340-591c7449dc7c8c47@postgresql.org
This commit makes pg_stat_statements support new GUC
pg_stat_statements.track_planning. If this option is enabled,
pg_stat_statements tracks the planning statistics of the statements,
e.g., the number of times the statement was planned, the total time
spent planning the statement, etc. This feature is useful to check
the statements that it takes a long time to plan. Previously since
pg_stat_statements tracked only the execution statistics, we could
not use that for the purpose.
The planning and execution statistics are stored at the end of
each phase separately. So there are not always one-to-one relationship
between them. For example, if the statement is successfully planned
but fails in the execution phase, only its planning statistics are stored.
This may cause the users to be able to see different pg_stat_statements
results from the previous version. To avoid this,
pg_stat_statements.track_planning needs to be disabled.
This commit bumps the version of pg_stat_statements to 1.8
since it changes the definition of pg_stat_statements function.
Author: Julien Rouhaud, Pascal Legrand, Thomas Munro, Fujii Masao
Reviewed-by: Sergei Kornilov, Tomas Vondra, Yoshikazu Imai, Haribabu Kommi, Tom Lane
Discussion: https://postgr.es/m/CAHGQGwFx_=DO-Gu-MfPW3VQ4qC7TfVdH2zHmvZfrGv6fQ3D-Tw@mail.gmail.com
Discussion: https://postgr.es/m/CAEepm=0e59Y_6Q_YXYCTHZkqOc6H2pJ54C_Xe=VFu50Aqqp_sA@mail.gmail.com
Discussion: https://postgr.es/m/DB6PR0301MB21352F6210E3B11934B0DCC790B00@DB6PR0301MB2135.eurprd03.prod.outlook.com
Fix lquery parsing to handle repeated flag characters correctly,
and to enforce the max label length correctly in some cases where
it did not before, and to detect empty labels in some cases where
it did not before.
In a more cosmetic vein, use a switch rather than if-then chains to
handle the different states, and avoid unnecessary checks on charlen
when looking for ASCII characters, and factor out multiple copies of
the label length checking code.
Tom Lane and Dmitry Belyavsky
Discussion: https://postgr.es/m/CADqLbzLVkBuPX0812o+z=c3i6honszsZZ6VQOSKR3VPbB56P3w@mail.gmail.com
Not much to say here --- does what it says on the tin. The "binary"
representation in each case is really just the same as the text format,
though we prefix a version-number byte in case anyone ever feels
motivated to change that. Thus, there's not any expectation of improved
speed or reduced space; the point here is just to allow clients to use
binary format for all columns of a query result or COPY data.
This makes use of the recently added ALTER TYPE support to add binary
I/O functions to an existing data type. As in commit a80818605,
we can piggy-back on there already being a new-for-v13 version of the
ltree extension, so we don't need a new update script file.
Nino Floris, reviewed by Alexander Korotkov and myself
Discussion: https://postgr.es/m/CANmj9Vxx50jOo1L7iSRxd142NyTz6Bdcgg7u9P3Z8o0=HGkYyQ@mail.gmail.com
Quite a few matching operators such as JSONB's @> used "contsel" and
"contjoinsel" as their selectivity estimators. That was a bad idea,
because (a) contsel is only a stub, yielding a fixed default estimate,
and (b) that default is 0.001, meaning we estimate these operators as
five times more selective than equality, which is surely pretty silly.
There's a good model for improving this in ltree's ltreeparentsel():
for any "var OP constant" query, we can try applying the operator
to all of the column's MCV and histogram values, taking the latter
as being a random sample of the non-MCV values. That code is
actually 100% generic, except for the question of exactly what
default selectivity ought to be plugged in when we don't have stats.
Hence, migrate the guts of ltreeparentsel() into the core code, provide
wrappers "matchingsel" and "matchingjoinsel" with a more-appropriate
default estimate, and use those for the non-geometric operators that
formerly used contsel (mostly JSONB containment operators and tsquery
matching).
Also apply this code to some match-like operators in hstore, ltree, and
pg_trgm, including the former users of ltreeparentsel as well as ones
that improperly used contsel. Since commit 911e70207 just created new
versions of those extensions that we haven't released yet, we can sneak
this change into those new versions instead of having to create an
additional generation of update scripts.
Patch by me, reviewed by Alexey Bashtanov
Discussion: https://postgr.es/m/12237.1582833074@sss.pgh.pa.us
The existing implementation of the ltree ~ lquery match operator is
sufficiently complex and undocumented that it's hard to tell exactly
what it does. But one thing it clearly gets wrong is the combination
of NOT symbols (!) and '*' symbols. A pattern such as '*.!foo.*'
should, by any ordinary understanding of regular expression behavior,
match any ltree that has at least one label that's not "foo". As best
we can tell by experimentation, what it's actually matching is any
ltree in which *no* label is "foo". That's surprising, and not at all
what the documentation says.
Now, that's arguably a useful behavior, so if we rewrite to fix the
bug we should provide some other way to get it. To do so, add the
ability to attach lquery quantifiers to non-'*' items as well as '*'s.
Then the pattern '!foo{,}' expresses "any ltree in which no label is
foo". For backwards compatibility, the default quantifier for non-'*'
items has to be "{1}", although the default for '*' items is '{,}'.
I wouldn't have done it like that in a green field, but it's not
totally horrible.
Armed with that, rewrite checkCond() from scratch. Treating '*' and
non-'*' items alike makes it simpler, not more complicated, so that
the function actually gets a lot shorter than it was.
Filip Rembiałkowski, Tom Lane, Nikita Glukhov, per a very
ancient bug report from M. Palm
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
Ensure that the type name is mentioned in all cases (bare "syntax error"
isn't that helpful). Avoid using the term "level", since that's not
used in the documentation. Phrase error position reports as "at
character N" not "in position N"; the latter seems ambiguous, and it's
certainly not how we say it elsewhere. For the same reason, make the
character position values be 1-based not 0-based. Provide a position
in more cases. (I continued to leave that out of messages complaining
about end-of-input, where it seemed pointless, as well as messages
complaining about overall input complexity, where fingering any one part
of the input would be arbitrary.)
Discussion: https://postgr.es/m/15582.1585529626@sss.pgh.pa.us
PostgreSQL provides set of template index access methods, where opclasses have
much freedom in the semantics of indexing. These index AMs are GiST, GIN,
SP-GiST and BRIN. There opclasses define representation of keys, operations on
them and supported search strategies. So, it's natural that opclasses may be
faced some tradeoffs, which require user-side decision. This commit implements
opclass parameters allowing users to set some values, which tell opclass how to
index the particular dataset.
This commit doesn't introduce new storage in system catalog. Instead it uses
pg_attribute.attoptions, which is used for table column storage options but
unused for index attributes.
In order to evade changing signature of each opclass support function, we
implement unified way to pass options to opclass support functions. Options
are set to fn_expr as the constant bytea expression. It's possible due to the
fact that opclass support functions are executed outside of expressions, so
fn_expr is unused for them.
This commit comes with some examples of opclass options usage. We parametrize
signature length in GiST. That applies to multiple opclasses: tsvector_ops,
gist__intbig_ops, gist_ltree_ops, gist__ltree_ops, gist_trgm_ops and
gist_hstore_ops. Also we parametrize maximum number of integer ranges for
gist__int_ops. However, the main future usage of this feature is expected
to be json, where users would be able to specify which way to index particular
json parts.
Catversion is bumped.
Discussion: https://postgr.es/m/d22c3a18-31c7-1879-fc11-4c1ce2f5e5af%40postgrespro.ru
Author: Nikita Glukhov, revised by me
Reviwed-by: Nikolay Shaplov, Robert Haas, Tom Lane, Tomas Vondra, Alvaro Herrera
Previously pg_stat_statements calculated the difference of buffer counters
by its own code even while BufferUsageAccumDiff() had the same code.
This commit expose BufferUsageAccumDiff() and makes pg_stat_statements
use it for the calculation, in order to simply the code.
This change also would be useful for the upcoming patch for the planning
counters in pg_stat_statements because the patch will add one more code
for the calculation of difference of buffer counters and that can easily be
done by using BufferUsageAccumDiff().
Author: Julien Rouhaud
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/bdfee4e0-a304-2498-8da5-3cb52c0a193e@oss.nttdata.com
Add more comments in ltree.h, and correct a misstatement or two.
Use a symbol, rather than hardwired constants, for the maximum length
of an ltree label. The max length is still hardwired in the associated
error messages, but I want to clean that up as part of a separate patch
to improve the error messages.
Something like "*{2}.*{3}" should presumably mean the same as
"*{5}", but it didn't. Improve that.
Get rid of an undocumented and remarkably ugly (though not, as far as
I can tell, actually unsafe) static variable in favor of passing more
arguments to checkCond().
Reverse-engineer some commentary. This function, like all of ltree,
is still far short of what I would consider the minimum acceptable
level of internal documentation, but at least now it has more than
zero comments.
Although this certainly seems like a bug fix, people might not
thank us for changing query behavior in stable branches, so
no back-patch.
Nikita Glukhov, with cosmetic improvements by me
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
These uint16 fields could be overflowed by excessively long input,
producing strange results. Complain for invalid input.
Likewise check for out-of-range values of the repeat counts in lquery.
(We don't try too hard on that one, notably not bothering to detect
if atoi's result has overflowed.)
Also detect length overflow in ltree_concat.
In passing, be more consistent about whether "syntax error" messages
include the type name. Also, clarify the documentation about what
the size limit is.
This has been broken for a long time, so back-patch to all supported
branches.
Nikita Glukhov, reviewed by Benjie Gillam and Tomas Vondra
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
We don't need to manually clean up allocations in a SRF's
multi_call_memory_ctx, because the SRF_RETURN_DONE infrastructure
takes care of that (and also ensures that it will happen even if the
function never gets a final call, which simple manual cleanup cannot
do).
Hence, the code removed by this patch is a waste of code and cycles.
Worse, it gives the impression that cleaning up manually is a thing,
which can lead to more serious errors such as those fixed in
commits 085b6b667 and b4570d33a. So we should get rid of it.
These are not quite actual bugs though, so I couldn't muster the
enthusiasm to back-patch. Fix in HEAD only.
Justin Pryzby
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
This extends the fixes made in commit 085b6b667 to other SRFs with the
same bug, namely pg_logdir_ls(), pgrowlocks(), pg_timezone_names(),
pg_ls_dir(), and pg_tablespace_databases().
Also adjust various comments and documentation to warn against
expecting to clean up resources during a ValuePerCall SRF's final
call.
Back-patch to all supported branches, since these functions were
all born broken.
Justin Pryzby, with cosmetic tweaks by me
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
This commit eliminates lossiness in check for missing parent downlinks in
B-tree. Instead of collecting lossy bitmap, we check for missing downlinks
while visiting child pages referenced by downlinks of target level. We
traverse from previous child page to the subsequent child page by right links.
Intermediate pages are candidates to have lost parent downlinks.
Also this commit introduces matching of child high key to the pivot key of
it's parent.
Discussion: https://postgr.es/m/CAPpHfduoF-c4RhOyOm%3D4-Y367%2B8txq9Q6iM_ty0OYc8si1Abww%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Peter Geoghegan
Previously, this code just smashed all types of DefElem values to
strings, cavalierly reasoning that nobody would care. But in point of
fact, most of the defGetFoo functions do distinguish among different
input syntaxes; for instance defGetBoolean will accept 1 as an integer
but not "1" as a string. This led to CREATE/ALTER TEXT SEARCH
DICTIONARY accepting 0 and 1 as values for boolean dictionary
properties, only to have the dictionary fail at runtime.
We can upgrade this behavior by teaching serialize_deflist that it
does not need to quote T_Integer or T_Float nodes' values on output,
and then teaching deserialize_deflist to restore unquoted integer or
float values as the appropriate node type. This should not break
anything using pg_ts_dict.dictinitoption, since that field is just
defined as being something valid to include in CREATE TEXT SEARCH
DICTIONARY.
deserialize_deflist is also used to parse the options arguments
for the ts_headline family of functions, but so far as I can see
this won't cause any problems there either: the only consumer of
that output is prsd_headline which always uses defGetString.
(Really that's a bad idea, but I won't risk changing it here.)
This is surely a bug fix, but given the lack of field complaints
I don't think it's necessary to back-patch.
Discussion: https://postgr.es/m/CAMkU=1xRcs_BUPzR0+V3WndaCAv0E_m3h6aUEJ8NF-sY1nnHsw@mail.gmail.com
The need for this was removed by
8b9e9644dc.
A number of files now need to include utils/acl.h or
parser/parse_node.h explicitly where they previously got it indirectly
somehow.
Since parser/parse_node.h already includes nodes/parsenodes.h, the
latter is then removed where the former was added. Also, remove
nodes/pg_list.h from objectaddress.h, since that's included via
nodes/parsenodes.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/7601e258-26b2-8481-36d0-dc9dca6f28f1%402ndquadrant.com
The data types that contrib/pageinspect's bt_metap() function were
declared to return as OUT arguments were wrong in some cases. For
example, the oldest_xact column (a TransactionId/xid field) was declared
integer/int4 within the pageinspect extension's sql file. This led to
errors when an oldest_xact value that exceeded 2^31-1 was encountered.
Some of the other columns were defined incorrectly ever since
pageinspect was first introduced, though they were far less likely to
produce problems in practice.
Fix these issues by changing the declaration of bt_metap() to
consistently use data types that can reliably represent all possible
values. This fixes things on HEAD only. No backpatch, since it doesn't
seem like there is a safe way to fix the issue without including a new
version of the pageinspect extension (HEAD/Postgres 13 already
introduced a new version of the extension). Besides, the oldest_xact
issue has been around since the release of Postgres 11, and we haven't
heard any complaints about it before now.
Also, throw an error when we detect a bt_metap() declaration that must
be from an old version of the pageinspect extension by examining the
number of attributes from the tuple descriptor for the return tuples.
It seems better to throw an error in a reliable and obvious way
following a Postgres upgrade, rather than letting bt_metap() fail
unpredictably. The problem is fundamentally with the CREATE FUNCTION
declared data types themselves, so I see no sensible alternative.
Reported-By: Victor Yegorov
Bug: #16285
Discussion: https://postgr.es/m/16285-df8fc1000ab3d5fc@postgresql.org
plperl's default handling of bool arguments or results is not terribly
satisfactory, since Perl doesn't consider the string 'f' to be false.
Ideally we'd just fix that, but the backwards-compatibility hazard
would be substantial. Instead, build a TRANSFORM module that can
be optionally applied to provide saner semantics.
Perhaps usefully, this is also about the minimum possible skeletal
example of a plperl transform module; so it might be a better starting
point for user-written transform modules than hstore_plperl or
jsonb_plperl.
Ivan Panchenko
Discussion: https://postgr.es/m/1583013317.881182688@f390.i.mail.ru
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
The backend was using strings to represent command tags and doing string
comparisons in multiple places, but that's slow and unhelpful. Create a
new command list with a supporting structure to use instead; this is
stored in a tag-list-file that can be tailored to specific purposes with
a caller-definable C macro, similar to what we do for WAL resource
managers. The first first such uses are a new CommandTag enum and a
CommandTagBehavior struct.
Replace numerous occurrences of char *completionTag with a
QueryCompletion struct so that the code no longer stores information
about completed queries in a cstring. Only at the last moment, in
EndCommand(), does this get converted to a string.
EventTriggerCacheItem no longer holds an array of palloc’d tag strings
in sorted order, but rather just a Bitmapset over the CommandTags.
Author: Mark Dilger, with unsolicited help from Álvaro Herrera
Reviewed-by: John Naylor, Tom Lane
Discussion: https://postgr.es/m/981A9DB4-3F0C-4DA5-88AD-CB9CFF4D6CAD@enterprisedb.com
Add a new bt_metap() column to display the metapage's allequalimage
field. Also add three new columns to contrib/pageinspect's
bt_page_items() function:
* Add a boolean column ("dead") that displays the LP_DEAD bit value for
each non-pivot tuple.
* Add a TID column ("htid") that displays a single heap TID value for
each tuple. This is the TID that is returned by BTreeTupleGetHeapTID(),
so comparable values are shown for pivot tuples, plain non-pivot tuples,
and posting list tuples.
* Add a TID array column ("tids") that displays TIDs from each tuple's
posting list, if any. This works just like the "tids" column from
pageinspect's gin_leafpage_items() function.
No version bump for the pageinspect extension, since there hasn't been a
stable Postgres release since the last version bump (the last bump was
part of commit 58b4cb30).
Author: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-WzmSMmU2eNvY9+a4MNP+z02h6sa-uxZvN3un6jY02ZVBSw@mail.gmail.com
This also involves renaming src/include/utils/hashutils.h, which
becomes src/include/common/hashfn.h. Perhaps an argument can be
made for keeping the hashutils.h name, but it seemed more
consistent to make it match the name of the file, and also more
descriptive of what is actually going on here.
Patch by me, reviewed by Suraj Kharage and Mark Dilger. Off-list
advice on how not to break the Windows build from Davinder Singh
and Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
Deduplication reduces the storage overhead of duplicates in indexes that
use the standard nbtree index access method. The deduplication process
is applied lazily, after the point where opportunistic deletion of
LP_DEAD-marked index tuples occurs. Deduplication is only applied at
the point where a leaf page split would otherwise be required. New
posting list tuples are formed by merging together existing duplicate
tuples. The physical representation of the items on an nbtree leaf page
is made more space efficient by deduplication, but the logical contents
of the page are not changed. Even unique indexes make use of
deduplication as a way of controlling bloat from duplicates whose TIDs
point to different versions of the same logical table row.
The lazy approach taken by nbtree has significant advantages over a GIN
style eager approach. Most individual inserts of index tuples have
exactly the same overhead as before. The extra overhead of
deduplication is amortized across insertions, just like the overhead of
page splits. The key space of indexes works in the same way as it has
since commit dd299df8 (the commit that made heap TID a tiebreaker
column).
Testing has shown that nbtree deduplication can generally make indexes
with about 10 or 15 tuples for each distinct key value about 2.5X - 4X
smaller, even with single column integer indexes (e.g., an index on a
referencing column that accompanies a foreign key). The final size of
single column nbtree indexes comes close to the final size of a similar
contrib/btree_gin index, at least in cases where GIN's posting list
compression isn't very effective. This can significantly improve
transaction throughput, and significantly reduce the cost of vacuuming
indexes.
A new index storage parameter (deduplicate_items) controls the use of
deduplication. The default setting is 'on', so all new B-Tree indexes
automatically use deduplication where possible. This decision will be
reviewed at the end of the Postgres 13 beta period.
There is a regression of approximately 2% of transaction throughput with
synthetic workloads that consist of append-only inserts into a table
with several non-unique indexes, where all indexes have few or no
repeated values. The underlying issue is that cycles are wasted on
unsuccessful attempts at deduplicating items in non-unique indexes.
There doesn't seem to be a way around it short of disabling
deduplication entirely. Note that deduplication of items in unique
indexes is fairly well targeted in general, which avoids the problem
there (we can use a special heuristic to trigger deduplication passes in
unique indexes, since we're specifically targeting "version bloat").
Bump XLOG_PAGE_MAGIC because xl_btree_vacuum changed.
No bump in BTREE_VERSION, since the representation of posting list
tuples works in a way that's backwards compatible with version 4 indexes
(i.e. indexes built on PostgreSQL 12). However, users must still
REINDEX a pg_upgrade'd index to use deduplication, regardless of the
Postgres version they've upgraded from. This is the only way to set the
new nbtree metapage flag indicating that deduplication is generally
safe.
Author: Anastasia Lubennikova, Peter Geoghegan
Reviewed-By: Peter Geoghegan, Heikki Linnakangas
Discussion:
https://postgr.es/m/55E4051B.7020209@postgrespro.ruhttps://postgr.es/m/4ab6e2db-bcee-f4cf-0916-3a06e6ccbb55@postgrespro.ru
The comments in fd.c have long claimed that all file allocations should
go through that module, but in reality that's not always practical.
fd.c doesn't supply APIs for invoking some FD-producing syscalls like
pipe() or epoll_create(); and the APIs it does supply for non-virtual
FDs are mostly insistent on releasing those FDs at transaction end;
and in some cases the actual open() call is in code that can't be made
to use fd.c, such as libpq.
This has led to a situation where, in a modern server, there are likely
to be seven or so long-lived FDs per backend process that are not known
to fd.c. Since NUM_RESERVED_FDS is only 10, that meant we had *very*
few spare FDs if max_files_per_process is >= the system ulimit and
fd.c had opened all the files it thought it safely could. The
contrib/postgres_fdw regression test, in particular, could easily be
made to fall over by running it under a restrictive ulimit.
To improve matters, invent functions Acquire/Reserve/ReleaseExternalFD
that allow outside callers to tell fd.c that they have or want to allocate
a FD that's not directly managed by fd.c. Add calls to track all the
fixed FDs in a standard backend session, so that we are honestly
guaranteeing that NUM_RESERVED_FDS FDs remain unused below the EMFILE
limit in a backend's idle state. The coding rules for these functions say
that there's no need to call them in code that just allocates one FD over
a fairly short interval; we can dip into NUM_RESERVED_FDS for such cases.
That means that there aren't all that many places where we need to worry.
But postgres_fdw and dblink must use this facility to account for
long-lived FDs consumed by libpq connections. There may be other places
where it's worth doing such accounting, too, but this seems like enough
to solve the immediate problem.
Internally to fd.c, "external" FDs are limited to max_safe_fds/3 FDs.
(Callers can choose to ignore this limit, but of course it's unwise
to do so except for fixed file allocations.) I also reduced the limit
on "allocated" files to max_safe_fds/3 FDs (it had been max_safe_fds/2).
Conceivably a smarter rule could be used here --- but in practice,
on reasonable systems, max_safe_fds should be large enough that this
isn't much of an issue, so KISS for now. To avoid possible regression
in the number of external or allocated files that can be opened,
increase FD_MINFREE and the lower limit on max_files_per_process a
little bit; we now insist that the effective "ulimit -n" be at least 64.
This seems like pretty clearly a bug fix, but in view of the lack of
field complaints, I'll refrain from risking a back-patch.
Discussion: https://postgr.es/m/E1izCmM-0005pV-Co@gemulon.postgresql.org
Andres Freund pointed out that allowing non-superusers to run
"CREATE EXTENSION ... FROM unpackaged" has security risks, since
the unpackaged-to-1.0 scripts don't try to verify that the existing
objects they're modifying are what they expect. Just attaching such
objects to an extension doesn't seem too dangerous, but some of them
do more than that.
We could have resolved this, perhaps, by still requiring superuser
privilege to use the FROM option. However, it's fair to ask just what
we're accomplishing by continuing to lug the unpackaged-to-1.0 scripts
forward. None of them have received any real testing since 9.1 days,
so they may not even work anymore (even assuming that one could still
load the previous "loose" object definitions into a v13 database).
And an installation that's trying to go from pre-9.1 to v13 or later
in one jump is going to have worse compatibility problems than whether
there's a trivial way to convert their contrib modules into extension
style.
Hence, let's just drop both those scripts and the core-code support
for "CREATE EXTENSION ... FROM".
Discussion: https://postgr.es/m/20200213233015.r6rnubcvl4egdh5r@alap3.anarazel.de
Manifested as
ERROR: subtransaction logged without previous top-level txn record
this check forbids legit behaviours like
- First xl_xact_assignment record is beyond reading, i.e. earlier
restart_lsn.
- After restart_lsn there is some change of a subxact.
- After that, there is second xl_xact_assignment (for another subxact)
revealing the relationship between top and first subxact.
Such a transaction won't be streamed anyway because we hadn't seen it in
full. Saying for sure whether xact of some record encountered after
the snapshot was deserialized can be streamed or not requires to know
whether it wrote something before deserialization point --if yes, it
hasn't been seen in full and can't be decoded. Snapshot doesn't have such
info, so there is no easy way to relax the check.
Reported-by: Hsu, John
Diagnosed-by: Arseny Sher
Author: Arseny Sher, Amit Kapila
Reviewed-by: Amit Kapila, Dilip Kumar
Backpatch-through: 9.5
Discussion: https://postgr.es/m/AB5978B2-1772-4FEE-A245-74C91704ECB0@amazon.com
Since its introduction in fe59e56, the code in charge of validating and
converting a file path includes some extra handling for absolute paths
pointing to an external log_directory, but this has never been used.
Author: Antonin Houska
Reviewed-by: Julien Rouhaud, Michael Paquier
Discussion: https://postgr.es/m/32663.1581592539@antos
This allows these modules to be installed into a database without
superuser privileges (assuming that the DBA or sysadmin has installed
the module's files in the expected place). You only need CREATE
privilege on the current database, which by default would be
available to the database owner.
The following modules are marked trusted:
btree_gin
btree_gist
citext
cube
dict_int
earthdistance
fuzzystrmatch
hstore
hstore_plperl
intarray
isn
jsonb_plperl
lo
ltree
pg_trgm
pgcrypto
seg
tablefunc
tcn
tsm_system_rows
tsm_system_time
unaccent
uuid-ossp
In the future we might mark some more modules trusted, but there
seems to be no debate about these, and on the whole it seems wise
to be conservative with use of this feature to start out with.
Discussion: https://postgr.es/m/32315.1580326876@sss.pgh.pa.us
Very recent gcc complains that PLyObject_ToJsonbValue could return
a pointer to a local variable. I think it's wrong; but the coding
is fragile enough, and the savings of one palloc() minimal enough,
that it seems better to just do a palloc() all the time. (My other
idea of tweaking the if-condition doesn't suppress the warning.)
Back-patch to v11 where this code was introduced.
Discussion: https://postgr.es/m/21547.1580170366@sss.pgh.pa.us
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
To make this work, (1) makeJsonLexContextCstringLen now takes the
encoding to be used as an argument; (2) check_stack_depth() is made to
do nothing in frontend code, and (3) elog(ERROR, ...) is changed to
pg_log_fatal + exit in frontend code.
Mark Dilger, reviewed and slightly revised by me.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
These two new parameters, named sslminprotocolversion and
sslmaxprotocolversion, allow to respectively control the minimum and the
maximum version of the SSL protocol used for the SSL connection attempt.
The default setting is to allow any version for both the minimum and the
maximum bounds, causing libpq to rely on the bounds set by the backend
when negotiating the protocol to use for an SSL connection. The bounds
are checked when the values are set at the earliest stage possible as
this makes the checks independent of any SSL implementation.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier, Cary Huang
Discussion: https://postgr.es/m/4F246AE3-A7AE-471E-BD3D-C799D3748E03@yesql.se
In a statement like "UPDATE remote_tab SET (x,y) = (SELECT ...)",
we'd conclude that the statement could be directly executed remotely,
because the sub-SELECT is in a resjunk tlist item that's not examined
for shippability. Currently that ends up crashing if the sub-SELECT
contains any remote Vars. Prevent the crash by deeming MULTIEXEC
Params to be unshippable.
This is a bit of a brute-force solution, since if the sub-SELECT
*doesn't* contain any remote Vars, the current execution technology
would work; but that's not a terribly common use-case for this syntax,
I think. In any case, we generally don't try to ship sub-SELECTs, so
it won't surprise anybody that this doesn't end up as a remote direct
update. I'd be inclined to see if that general limitation can be fixed
before worrying about this case further.
Per report from Lukáš Sobotka.
Back-patch to 9.6. 9.5 had MULTIEXPR, but we didn't try to perform
remote direct updates then, so the case didn't arise anyway.
Discussion: https://postgr.es/m/CAJif3k+iA_ekBB5Zw2hDBaE1wtiQa4LH4_JUXrrMGwTrH0J01Q@mail.gmail.com
This function allows us to fsync the specified file or directory.
It's useful, for example, when we want to sync the file that
pg_file_write() writes out or that COPY TO exports the data into,
for durability.
Author: Fujii Masao
Reviewed-By: Julien Rouhaud, Arthur Zakirov, Michael Paquier, Atsushi Torikoshi
Discussion: https://www.postgresql.org/message-id/CAHGQGwGY8uzZ_k8dHRoW1zDcy1Z7=5GQ+So4ZkVy2u=nLsk=hA@mail.gmail.com
The strategy of GIN index scan is driven by opclass-specific extract_query
method. This method that needed search mode is GIN_SEARCH_MODE_ALL. This
mode means that matching tuple may contain none of extracted entries. Simple
example is '!term' tsquery, which doesn't need any term to exist in matching
tsvector.
In order to handle such scan key GIN calculates virtual entry, which contains
all TIDs of all entries of attribute. In fact this is full scan of index
attribute. And typically this is very slow, but allows to handle some queries
correctly in GIN. However, current algorithm calculate such virtual entry for
each GIN_SEARCH_MODE_ALL scan key even if they are multiple for the same
attribute. This is clearly not optimal.
This commit improves the situation by introduction of "exclude only" scan keys.
Such scan keys are not capable to return set of matching TIDs. Instead, they
are capable only to filter TIDs produced by normal scan keys. Therefore,
each attribute should contain at least one normal scan key, while rest of them
may be "exclude only" if search mode is GIN_SEARCH_MODE_ALL.
The same optimization might be applied to the whole scan, not per-attribute.
But that leads to NULL values elimination problem. There is trade-off between
multiple possible ways to do this. We probably want to do this later using
some cost-based decision algorithm.
Discussion: https://postgr.es/m/CAOBaU_YGP5-BEt5Cc0%3DzMve92vocPzD%2BXiZgiZs1kjY0cj%3DXBg%40mail.gmail.com
Author: Nikita Glukhov, Alexander Korotkov, Tom Lane, Julien Rouhaud
Reviewed-by: Julien Rouhaud, Tomas Vondra, Tom Lane
Introduce new fields amusemaintenanceworkmem and amparallelvacuumoptions
in IndexAmRoutine for parallel vacuum. The amusemaintenanceworkmem tells
whether a particular IndexAM uses maintenance_work_mem or not. This will
help in controlling the memory used by individual workers as otherwise,
each worker can consume memory equal to maintenance_work_mem. The
amparallelvacuumoptions tell whether a particular IndexAM participates in
a parallel vacuum and if so in which phase (bulkdelete, vacuumcleanup) of
vacuum.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Tomas Vondra and Robert Haas
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1LmcD5aPogzwim5Nn58Ki+74a6Edghx4Wd8hAskvHaq5A@mail.gmail.com
We currently have several sets of files generated from data provided
by Unicode. These all have ad hoc rules and instructions for updating
when new Unicode versions appear, and it's not done consistently.
This patch centralizes and automates the process and makes it part of
the release checklist. The Unicode and CLDR versions are specified in
Makefile.global.in. There is a new make target "update-unicode" that
downloads all the relevant files and runs the generation script.
There is also a new script for generating the table of combining
characters for ucs_wcwidth(). That table is now in a separate include
file rather than hardcoded into the middle of other code. This is
based on the script that was used for generating
d8594d123c, but the script itself wasn't
committed at that time.
Reviewed-by: John Naylor <john.naylor@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c8d05f42-443e-6c23-819b-05b31759a37c@2ndquadrant.com
Failures in allocations could lead to crashes with NULL pointer
dereferences . Memory context TopMemoryContext is used instead to keep
alive the plans allocated in the session. A more specific context could
be used here, but this is left for later.
Reported-by: Jian Zhang
Author: Michael Paquier
Reviewed-by: Tom Lane, Andres Freund
Discussion: https://postgr.es/m/16190-70181c803641c3dc@postgresql.org
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql