The code for unloading a library has been commented-out for over 12
years, ever since commit 602a9ef5a7, and we're
no closer to supporting it now than we were back then.
Nathan Bossart, reviewed by Michael Paquier and by me.
Discussion: http://postgr.es/m/Ynsc9bRL1caUSBSE@paquier.xyz
To enable diagnosis of systems that are not processing ProcSignalBarrier
requests promptly, add a LOG message every 5 seconds if we seem to be
wedged. Although you could already see this state as a wait event in
pg_stat_activity, the log message also shows the PID of the process that
is preventing progress.
Also add DEBUG1 logging around the whole wait loop.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA%2BTgmoYJ03r5359gQutRGP9BtigYCg3_UskcmnVjBf-QO3-0pQ%40mail.gmail.com
The problem is that we don't send keep-alive messages for a long time
while processing large transactions during logical replication where we
don't send any data of such transactions. This can happen when the table
modified in the transaction is not published or because all the changes
got filtered. We do try to send the keep_alive if necessary at the end of
the transaction (via WalSndWriteData()) but by that time the
subscriber-side can timeout and exit.
To fix this we try to send the keepalive message if required after
processing certain threshold of changes.
Reported-by: Fabrice Chapuis
Author: Wang wei and Amit Kapila
Reviewed By: Masahiko Sawada, Euler Taveira, Hou Zhijie, Hayato Kuroda
Backpatch-through: 10
Discussion: https://postgr.es/m/CAA5-nLARN7-3SLU_QUxfy510pmrYK6JJb=bk3hcgemAM_pAv+w@mail.gmail.com
Presently, the server may emit a variety of log messages when inspecting
a runtime-computed GUC, mostly in the shape of one LOG message with the
default configuration, related to the startup sequence launched as such
GUCs require a load of the control file and of external shared
libraries.
For example, the server will always emit a "database system is shut
down" LOG (unless the user has set log_min_messages higher than LOG),
which is an annoying behavior as "postgres -C" is expected to only emit
in its output the parameter value we are looking for. The parameter
value is sent to stdout, while the logs are sent to stderr so we could
recommend to use a redirection, but there was not much love for this
workaround either.
To avoid such extra log messages, per discussion, this change sets
log_min_messages to FATAL internally when -C is used on a
runtime-computed GUC (even if set to PANIC in postgresql.conf). At
FATAL, the user will still receive messages explaining why a GUC value
cannot be inspected, and will know if the command is attempted on a
server already running, something not supported yet for a
runtime-computed GUC.
Reported-by: Magnus Hagander, Bruce Momjian
Author: Nathan Bossart, Michael Paquier
Discussion: https://postgr.es/m/Yni6ZHkGotUU+RSf@paquier.xyz
The current setup assumes that commands for lz4, zstd and gzip always
exist by default if not enforced by a user's environment. However,
vcpkg, as one example, installs libraries but no binaries, so this
default setup to assume that a command should always be present would
cause failures. This commit improves the detection of such external
commands as follows:
* If a ENV value is available, trust the environment/user and use it.
* If a ENV value is not available, check its execution by looking in the
current PATH, by launching a simple "$command --version" (that should be
portable enough).
** On execution failure, ignore ENV{command}.
** On execution success, set ENV{command} = "$command".
Note that this new rule applies to gzip, lz4 and zstd but not tar that
we assume will always exist. Those commands are set up in the
environment only when using bincheck and taptest. The CI includes all
those commands and I have checked that their setup is correct there. I
have also tested this change in a MSVC environment where we have none of
those commands.
While on it, remove the references to lz4 from the documentation and
vcregress.pl in ~v13. --with-lz4 has been added in v14~ so there is no
point to have this information in these older branches.
Reported-by: Andrew Dunstan
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/14402151-376b-a57a-6d0c-10ad12608e12@dunslane.net
Backpatch-through: 10
697492434 added 3 new quicksort specialization functions for common
datatypes.
That commit was not very consistent in how it would determine if we're
compiling for 32-bit or 64-bit machines. It would sometimes use
USE_FLOAT8_BYVAL and at other times check if SIZEOF_DATUM == 8. This
could cause theoretical problems due to the way USE_FLOAT8_BYVAL is now
defined based on SIZEOF_VOID_P >= 8. If pointers for some reason were
ever larger than 8-bytes then we'd end up doing 32-bit comparisons
mistakenly. Let's just always check SIZEOF_DATUM >= 8.
It also seems that ssup_datum_signed_cmp is just never used on 32-bit
builds, so let's just ifdef that out to make sure we never accidentally
use that comparison function on such machines. This also allows us to
ifdef out 1 of the 3 new specialization quicksort functions in 32-bit
builds which seems to shrink down the binary by over 4KB on my machine.
In passing, also add the missing DatumGetInt32() / DatumGetInt64() macros
in the comparison functions.
Discussion: https://postgr.es/m/CAApHDvqcQExRhtRa9hJrJB_5egs3SUfOcutP3m+3HO8A+fZTPA@mail.gmail.com
Reviewed-by: John Naylor
This commit addresses the following issues in the TAP tests of
pg_upgrade, introduced in 322becb:
- Remove --port and --host for commands that already rely on a node's
environment PGHOST and PGPORT.
- Switch from run_log() to command_ok(), as all the commands executed in
the tests should succeed.
- Change EXTRA_REGRESS_OPTS to make it count as a shell fragment (fixing
s/OPT/OPTS on a way), to be compatible with the various Makefiles using
it as well as 027_stream_regress.pl in the recovery tests. The command
built for the execution the pg_regress command is reformatted, while on
it, to map with the recovery test doing the same thing (we should
refactor and consolidate that in the future, perhaps).
- Re-add the test for database names stressing the behavior of
backslashes with double quotes, mostly here for Windows.
Tests doable with the upgrade across different major versions still work
the same way.
Reported-by: Noah Misch
Discussion: https://postgr.es/m/20220502042718.GB1565149@rfd.leadboat.com
The parser code that transformed VALUES from row-oriented to
column-oriented lists failed if there were zero columns.
You can't write that straightforwardly (though probably you
should be able to), but the case can be reached by expanding
a "tab.*" reference to a zero-column table.
Per bug #17477 from Wang Ke. Back-patch to all supported branches.
Discussion: https://postgr.es/m/17477-0af3c6ac6b0a6ae0@postgresql.org
This reverts commit eafdf9de06
and its back-branch counterparts. Corey Huinker pointed out that
we'd discussed this exact change back in 2016 and rejected it,
on the grounds that there's at least one usage pattern with LIMIT
where an infinite endpoint can usefully be used. Perhaps that
argument needs to be re-litigated, but there's no time left before
our back-branch releases. To keep our options open, restore the
status quo ante; if we do end up deciding to change things, waiting
one more quarter won't hurt anything.
Rather than just doing a straight revert, I added a new test case
demonstrating the usage with LIMIT. That'll at least remind us of
the issue if we forget again.
Discussion: https://postgr.es/m/3603504.1652068977@sss.pgh.pa.us
Discussion: https://postgr.es/m/CADkLM=dzw0Pvdqp5yWKxMd+VmNkAMhG=4ku7GnCZxebWnzmz3Q@mail.gmail.com
It intended to, but did not, achieve this. Adopt the new standard of
setting user ID just after locking the relation. Back-patch to v10 (all
supported versions).
Reviewed by Simon Riggs. Reported by Alvaro Herrera.
Security: CVE-2022-1552
When a feature enumerates relations and runs functions associated with
all found relations, the feature's user shall not need to trust every
user having permission to create objects. BRIN-specific functionality
in autovacuum neglected to account for this, as did pg_amcheck and
CLUSTER. An attacker having permission to create non-temp objects in at
least one schema could execute arbitrary SQL functions under the
identity of the bootstrap superuser. CREATE INDEX (not a
relation-enumerating operation) and REINDEX protected themselves too
late. This change extends to the non-enumerating amcheck interface.
Back-patch to v10 (all supported versions).
Sergey Shinderuk, reviewed (in earlier versions) by Alexander Lakhin.
Reported by Alexander Lakhin.
Security: CVE-2022-1552
If a cluster is promoted (aka the control file shows a state different
than DB_IN_ARCHIVE_RECOVERY) while CreateRestartPoint() is still
processing, this function could miss an update of the control file for
"checkPoint" and "checkPointCopy" but still do the recycling and/or
removal of the past WAL segments, assuming that the to-be-updated LSN
values should be used as reference points for the cleanup. This causes
a follow-up restart attempting crash recovery to fail with a PANIC on a
missing checkpoint record if the end-of-recovery checkpoint triggered by
the promotion did not complete while the cluster abruptly stopped or
crashed before the completion of this checkpoint. The PANIC would be
caused by the redo LSN referred in the control file as located in a
segment already gone, recycled by the previous restartpoint with
"checkPoint" out-of-sync in the control file.
This commit fixes the update of the control file during restartpoints so
as "checkPoint" and "checkPointCopy" are updated even if the cluster has
been promoted while a restartpoint is running, to be on par with the set
of WAL segments actually recycled in the end of CreateRestartPoint().
This problem exists in all the stable branches. However, commit
7ff23c6, by removing the last call of CreateCheckPoint() from the
startup process, has made this bug much easier to reason about as
concurrent checkpoints are not possible anymore. No backpatch is done
yet, mostly out of caution from me as a point release is close by, but
we need to think harder about the case of concurrent checkpoints at
promotion if the bgwriter is not considered as running by the startup
process in ~v14, so this change is done only on HEAD for the moment.
Reported-by: Fujii Masao, Rui Zhao
Author: Kyotaro Horiguchi
Reviewed-by: Nathan Bossart, Michael Paquier
Discussion: https://postgr.es/m/20220316.102444.2193181487576617583.horikyota.ntt@gmail.com
Commits 4eb21763 and b74e94dc introduced a way to force every backend to
close all relation files, to fix an ancient Windows-only bug.
This commit extends that behavior to all operating systems and adds
a couple of extra barrier points, to fix a totally different class of
bug: the reuse of relfilenodes in scenarios that have no other kind of
cache invalidation to prevent file descriptor mix-ups.
In all releases, data corruption could occur when you moved a database
to another tablespace and then back again. Despite that, no back-patch
for now as the infrastructure required is too new and invasive. In
master only, since commit aa010514, it could also happen when using
CREATE DATABASE with a user-supplied OID or via pg_upgrade.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220209220004.kb3dgtn2x2k2gtdm%40alap3.anarazel.de
With sufficiently bad luck, it was possible for IssuePendingWritebacks()
to reopen a file after we'd processed PROCSIGNAL_BARRIER_SMGRRELEASE and
before the file was unlinked by some other backend. That left a small
hole in commit 4eb21763's plan to fix all spurious errors from DROP
TABLESPACE and similar on Windows.
Fix by closing md.c's segments, instead of just closing fd.c's
descriptors, and then teaching smgrwriteback() not to open files that
aren't already open.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20220209220004.kb3dgtn2x2k2gtdm%40alap3.anarazel.de
Since 6bc8ef0b7f, the maximum number
of backends can't change as background workers are registered, but
these comments still reflect the way things worked prior to that.
Also, per recent discussion, some modules call SetConfigOption()
from _PG_init(). It's not entirely clear to me whether we want to
regard that as a fully supported operation, but since we know it's
a thing that happens, it at least deserves a mention in the comments,
so add that.
Nathan Bossart, reviewed by Anton A. Melnikov
Discussion: http://postgr.es/m/20220419154658.GA2487941@nathanxps13
Setting up an EVP context for ciphers banned under FIPS generate
two OpenSSL errors in the queue, and as we only consume one from
the queue the other is at the head for the next invocation:
postgres=# select md5('foo');
ERROR: could not compute MD5 hash: unsupported
postgres=# select md5('foo');
ERROR: could not compute MD5 hash: initialization error
Clearing the error queue when creating the context ensures that
we don't pull in an error from an earlier operation.
Discussion: https://postgr.es/m/C89D932C-501E-4473-9750-638CFCD9095E@yesql.se
SubqueryScan was always getting labeled with a rowcount estimate
appropriate for non-parallel cases. However, nodes that are
underneath a Gather should be treated as processing only one
worker's share of the rows, whether the particular node is explicitly
parallel-aware or not. Most non-scan-level node types get this
right automatically because they base their rowcount estimate on
that of their input sub-Path(s). But SubqueryScan didn't do that,
instead using the whole-relation rowcount estimate as if it were
a non-parallel-aware scan node. If there is a parallel-aware node
below the SubqueryScan, this is wrong, and it results in inflating
the cost estimates for nodes above the SubqueryScan, which can cause
us to not choose a parallel plan, or choose a silly one --- as indeed
is visible in the one regression test whose results change with this
patch. (Although that plan tree appears to contain no SubqueryScans,
there were some in it before setrefs.c deleted them.)
To fix, use path->subpath->rows not baserel->tuples as the number
of input tuples we'll process. This requires estimating the quals'
selectivity afresh, which is slightly annoying; but it shouldn't
really add much cost thanks to the caching done in RestrictInfo.
This is pretty clearly a bug fix, but I'll refrain from back-patching
as people might not appreciate plan choices changing in stable branches.
The fact that it took us this long to identify the bug suggests that
it's not a major problem.
Per report from bucoo, though this is not his proposed patch.
Discussion: https://postgr.es/m/202204121457159307248@sohu.com
The test for lz4.h used AC_CHECK_HEADERS, but nothing was using the
resulting symbol HAVE_LZ4_H. Change this to use AC_CHECK_HEADER
instead. This was probably an oversight, seeing that the nearby
similar tests do this correctly.
The testclient and uri-regress programs in the libpq test suite had
quite generic names which didn't convey much meaning. Since they are
installed as part of the MSVC test runs, ensure that their purpose
is a little bit clearer by renaming with a libpq_ prefix. While at
it rename uri-regress to uri_regress to avoid mixing dash and under-
score in the same filename.
Reported-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20220501080706.GA1542365@rfd.leadboat.com
The tests added in 9f8a050f68 failed nearly reliably on FreeBSD in CI, and
occasionally on the buildfarm. That turns out to be caused not by a bug in the
test, but by a longstanding bug in recovery conflict handling.
The standby timeout handler, used by ResolveRecoveryConflictWithBufferPin(),
executed SendRecoveryConflictWithBufferPin() inside a signal handler. A bad
idea, because the deadlock timeout handler (or a spurious latch set) could
have interrupted ProcWaitForSignal(). If unlucky that could cause a
self-deadlock on ProcArrayLock, if the deadlock check is in
SendRecoveryConflictWithBufferPin()->CancelDBBackends().
To fix, set a flag in StandbyTimeoutHandler(), and check the flag in
ResolveRecoveryConflictWithBufferPin().
Subsequently the recovery conflict tests will be backpatched.
Discussion: https://postgr.es/m/20220413002626.udl7lll7f3o7nre7@alap3.anarazel.de
Backpatch: 10-
The recovery conflict tests added in 9f8a050f68 surfaced a bug in the
interaction between buffer pin and deadlock recovery conflicts. To make sure
that the bugfix won't break deadlock conflict detection, add a test for that
scenario.
031_recovery_conflict.pl will later be backpatched, with this included.
Discussion: https://postgr.es/m/20220413002626.udl7lll7f3o7nre7@alap3.anarazel.de
Instability in the test for pg_walinspect revealed that
pg_get_wal_records_info_till_end_of_wal(x) would try to decode all the
records with a start LSN earlier than the flush LSN, even though that
might include a partial record at the end of the range. In that case,
read_local_xlog_page_no_wait() would return NULL when it tried to read
past the flush LSN, which would be interpreted as an error by the
caller. That caused a test failure only on a BF animal that had been
restarted recently, but could be expected to happen in the wild quite
easily depending on the alignment of various parameters.
Fix by using private data in read_local_xlog_page_no_wait() to signal
end-of-wal to the caller, so that it can be properly distinguished
from a real error.
Discussion: https://postgr.es/m/Ymd/e5eeZMNAkrXo%40paquier.xyz
Discussion: https://postgr.es/m/111657.1650910309@sss.pgh.pa.us
Authors: Thomas Munro, Bharath Rupireddy.
I noticed that plpgsql would allow assignment of a new value to a
variable even when that variable is marked CONSTANT, if the variable
is used as an output parameter in CALL or is a refcursor variable
that OPEN assigns a new value to. Fix these oversights.
In the CALL case, the check has to be done at runtime because we
cannot know at parse time which parameters are OUT parameters.
For OPEN, it seems best to likewise enforce at runtime because
then we needn't throw error if the variable has a nonnull value
(since OPEN will only try to overwrite a null value).
Although this is surely a bug fix, no back-patch: it seems unlikely
that anyone would thank us for breaking formerly-working code in
minor releases.
Discussion: https://postgr.es/m/214453.1651182729@sss.pgh.pa.us
mark_async_capable_plan(), which is called from create_append_plan() to
determine whether subplans are async-capable, failed to take into
account that the given subplan created from a given subpath might
include a gating Result node if the subpath is a SubqueryScanPath or
ForeignPath, causing a segmentation fault there when the subplan created
from a SubqueryScanPath includes the Result node, or causing
ExecAsyncRequest() to throw an error about an unrecognized node type
when the subplan created from a ForeignPath includes the Result node,
because in the latter case the Result node was unintentionally
considered as async-capable, but we don't currently support executing
Result nodes asynchronously. Fix by modifying mark_async_capable_plan()
to disable asynchronous execution in such cases. Also, adjust code in
the ProjectionPath case in mark_async_capable_plan(), for consistency
with other cases, and adjust/improve comments there.
is_async_capable_path() added in commit 27e1f1456, which was rewritten
to mark_async_capable_plan() in a later commit, has the same issue,
causing the error at execution mentioned above, so back-patch to v14
where the aforesaid commit went in.
Per report from Justin Pryzby.
Etsuro Fujita, reviewed by Zhihong Yu and Justin Pryzby.
Discussion: https://postgr.es/m/20220408124338.GK24419%40telsasoft.com
This reverts commits 2c902bb and ccfbd92. Per buildfarm members
kestrel, rorqual and calliphoridae, the assertions checking that a TLI
history file should not exist when created by a WAL receiver have been
failing, and switching to durable_rename() over durable_rename_excl()
would cause the newest TLI history file to overwrite the existing one.
We need to think harder about such cases, so revert the new logic for
now.
Note that all the failures have been reported in the test
025_stuck_on_old_timeline.
Discussion: https://postgr.es/m/511362.1651116498@sss.pgh.pa.us
ccfbd92 has replaced all existing in-core callers of this function in
favor of durable_rename(). durable_rename_excl() is by nature unsafe on
crashes happening at the wrong time, so just remove it.
Author: Nathan Bossart
Reviewed-by: Robert Haas, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20220407182954.GA1231544@nathanxps13
durable_rename_excl() attempts to avoid overwriting any existing files
by using link() and unlink(), falling back to rename() on some platforms
(e.g., Windows where link() followed by unlink() is not concurrent-safe,
see 909b449). Most callers of durable_rename_excl() use it just in case
there is an existing file, but it happens that for all of them we never
expect a target file to exist (WAL segment recycling, creation of
timeline history file and basic_archive).
basic_archive used durable_rename_excl() to avoid overwriting an archive
concurrently created by another server. Now, there is a stat() call to
avoid overwriting an existing archive a couple of lines above, so note
that this change opens a small TOCTOU window in this module between the
stat() call and durable_rename().
Furthermore, as mentioned in the top comment of durable_rename_excl(),
this routine can result in multiple hard links to the same file and data
corruption, with two or more links to the same file in pg_wal/ if a
crash happens before the unlink() call during WAL recycling.
Specifically, this would produce links to the same file for the current
WAL file and the next one because the half-recycled WAL file was
re-recycled during crash recovery of a follow-up cluster restart.
This change replaces all calls to durable_rename_excl() with
durable_rename(). This removes the protection against accidentally
overwriting an existing file, but some platforms are already living
without it, and all those code paths never expect an existing file (a
couple of assertions are added to check after that, in case).
This is a bug fix, but knowing the unlikeliness of the problem involving
one of more crashes at an exceptionally bad moment, no backpatch is
done. This could be revisited in the future.
Author: Nathan Bossart
Reviewed-by: Robert Haas, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20220407182954.GA1231544@nathanxps13
Unlike existing WRITE_*_ARRAY macros, WRITE_INDEX_ARRAY needs to
handle the case that the field is NULL. We already have the
convention to print NULL fields as "<>", so we do that here as well.
There is currently no corresponding read function for this, so reading
this back in is not implemented, but it could be if needed.
Reported-by: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/CAMbWs4-LN%3DbF8f9eU2R94dJtF54DfDvBq%2BovqHnOQqbinYDrUw%40mail.gmail.com
This commit adds two isolation tests for CLUSTER, using:
- A normal table, making sure that CLUSTER blocks and completes if the
table is locked by a concurrent session.
- A partitioned table with a partition owned by a different user. If
the partitioned table is locked by a concurrent session, CLUSTER on the
partitioned table should block. If the partition owned by a different
user is locked, CLUSTER on its partitioned table should complete and
skip the partition. 3f19e17 has added an early check to ignore such a
partition with a SQL regression test, but this was not checking that
CLUSTER should not block.
Discussion: https://postgr.es/m/YlqveniXn9AI6RFZ@paquier.xyz
For some reason by default the mingw C Runtime takes it upon itself to
expand program arguments that look like shell globbing characters. That
has caused much scratching of heads and mis-attribution of the causes of
some TAP test failures, so stop doing that.
This removes an inconsistency with Windows binaries built with MSVC,
which have no such behaviour.
Per suggestion from Noah Misch.
Backpatch to all live branches.
Discussion: https://postgr.es/m/20220423025927.GA1274057@rfd.leadboat.com
Another test is constructed on top of regression tests, which does not
work correctly with unlogged tables. For now, cope with that by making
sure no unlogged table is left behind.
Per buildfarm pink after 4fb5c794e5.
Several places didn't do it, and in many cases it didn't matter because
it would be a small allocation in a short-lived context; but other
places may accumulate a few (for example, in CreateDatabaseUsingFileCopy,
one per tablespace). In most databases this is highly unlikely to be
very serious either, but it seems better to make the code consistent in
case there's future copy-and-paste.
The only case of actual concern seems to be the aforementioned routine,
which is new with commit 9c08aea6a3, so there's no need to backpatch.
As pointed out by Coverity.
This function looks for a reference to the recursive WITH CTE,
but it checked only the CTE name not ctelevelsup, so that it could
seize on a lower CTE that happened to have the same name. This
would result in planner failures later, either weird errors such as
"could not find attribute 2 in subquery targetlist", or crashes
or assertion failures. The code also merely Assert'ed that it found
a matching entry, which is not guaranteed at all by the parser.
Per bugs #17320 and #17318 from Zhiyong Wu.
Thanks to Kyotaro Horiguchi for investigation.
Discussion: https://postgr.es/m/17320-70e37868182512ab@postgresql.org
Discussion: https://postgr.es/m/17318-2eb65a3a611d2368@postgresql.org
697492434 added 3 new qsort specialization functions aimed to improve the
performance of sorting many of the common pass-by-value data types when
they're the leading or only sort key.
Unfortunately, that has caused a performance regression when sorting
datasets where many of the values being compared were equal. What was
happening here was that we were falling back to the standard sort
comparison function to handle tiebreaks. When the two given Datums
compared equally we would incur both the overhead of an indirect function
call to the standard comparer to perform the tiebreak and also the
standard comparer function would go and compare the leading key needlessly
all over again.
Here improve the situation in the 3 new comparison functions. We now
return 0 directly when the two Datums compare equally and we're performing
a 1-key sort.
Here we don't do anything to help the multi-key sort case where the
leading key uses one of the sort specializations functions. On testing
this case, even when the leading key's values are all equal, there
appeared to be no performance regression. Let's leave it up to future
work to optimize that case so that the tiebreak function no longer
re-compares the leading key over again.
Another possible fix for this would have been to add 3 additional sort
specialization functions to handle single-key sorts for these
pass-by-value types. The reason we didn't do that here is that we may
deem some other sort specialization to be more useful than single-key
sorts. It may be impractical to have sort specialization functions for
every single combination of what may be useful and it was already decided
that further analysis into which ones are the most useful would be delayed
until the v16 cycle. Let's not let this regression force our hand into
trying to make that decision for v15.
Author: David Rowley
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/CA+hUKGJRbzaAOUtBUcjF5hLtaSHnJUqXmtiaLEoi53zeWSizeA@mail.gmail.com
inline_cte() expected to find exactly as many references to the
target CTE as its cterefcount indicates. While that should be
accurate for the tree as emitted by the parser, there are some
optimizations that occur upstream of here that could falsify it,
notably removal of unused subquery output expressions.
Trying to make the accounting 100% accurate seems expensive and
doomed to future breakage. It's not really worth it, because
all this code is protecting is downstream assumptions that every
referenced CTE has a plan. Let's convert those assertions to
regular test-and-elog just in case there's some actual problem,
and then drop the failing assertion.
Per report from Tomas Vondra (thanks also to Richard Guo for
analysis). Back-patch to v12 where the faulty code came in.
Discussion: https://postgr.es/m/29196a1e-ed47-c7ca-9be2-b1c636816183@enterprisedb.com
Commit 618c16707 invented an "error_result" flag in PGconn, which
intends to represent the state that we have an error condition and
need to build a PGRES_FATAL_ERROR PGresult from the message text in
conn->errorMessage, but have not yet done so. (Postponing construction
of the error object simplifies dealing with out-of-memory conditions
and with concatenation of messages for multiple errors.) For nearly all
purposes, this "virtual" PGresult object should act the same as if it
were already materialized. But a couple of places in fe-protocol3.c
didn't get that memo, and were only testing conn->result as they used
to, without also checking conn->error_result.
In hopes of reducing the probability of similar mistakes in future,
I invented a pgHavePendingResult() macro that includes both tests.
Per report from Peter Eisentraut.
Discussion: https://postgr.es/m/b52277b9-fa66-b027-4a37-fb8989c73ff8@enterprisedb.com
Commit aa0105141 assigned fixed OIDs to template0 and postgres
in a very ad-hoc way. Notably, instead of teaching Catalog.pm
about these OIDs, the unused_oids script was just hacked to
not show them as unused. That's problematic since, for example,
duplicate_oids wouldn't report any future conflict. Hence,
invent a macro DECLARE_OID_DEFINING_MACRO() that can be used to
define an OID that is known to Catalog.pm and will participate
in duplicate-detection as well as renumbering by renumber_oids.pl.
(We don't anticipate renumbering these particular OIDs, but we
might as well build out all the Catalog.pm infrastructure while
we're here.)
Another issue is that aa0105141 neglected to touch IsPinnedObject,
with the result that it now claimed template0 and postgres are
pinned. The right thing to do there seems to be to teach it that
no database is pinned, since in fact DROP DATABASE doesn't check
for pinned-ness (and at least for these cases, that is an
intentional choice). It's not clear whether this wrong answer
had any visible effect, but perhaps it could have resulted in
erroneous management of dependency entries.
In passing, rename the TemplateDbOid macro to Template1DbOid
to reduce confusion (likely we should have done that way back
when we invented template0, but we didn't), and rename the
OID macros for template0 and postgres to have a similar style.
There are no changes to postgres.bki here, so no need for a
catversion bump.
Discussion: https://postgr.es/m/2935358.1650479692@sss.pgh.pa.us
This is needed so that renumber_oids.pl can handle renumbering
shared catalog declarations, which need to provide C macros for
the OIDs of the shared toast table and index. The previous
method of writing a C macro separately was error-prone anyway.
Also teach renumber_oids.pl about DECLARE_UNIQUE_INDEX_PKEY,
as we missed doing when inventing that macro.
There are no changes to postgres.bki here, so no need for a
catversion bump.
Discussion: https://postgr.es/m/2995325.1650487527@sss.pgh.pa.us
CLUSTER sort won't use the datum1 SortTuple field when clustering
against an index whose leading key is an expression. This makes it
unsafe to use the abbreviated keys optimization, which was missed by the
logic that sets up SortSupport state. Affected tuplesorts output tuples
in a completely bogus order as a result (the wrong SortSupport based
comparator was used for the leading attribute).
This issue is similar to the bug fixed on the master branch by recent
commit cc58eecc5d. But it's a far older issue, that dates back to the
introduction of the abbreviated keys optimization by commit 4ea51cdfe8.
Backpatch to all supported versions.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKG+bA+bmwD36_oDxAoLrCwZjVtST2fqe=b4=qZcmU7u89A@mail.gmail.com
Backpatch: 10-
Such cases will lead to infinite loops, so they're of no practical
value. The numeric variant of generate_series() already threw error
for this, so borrow its message wording.
Per report from Richard Wesley. Back-patch to all supported branches.
Discussion: https://postgr.es/m/91B44E7B-68D5-448F-95C8-B4B3B0F5DEAF@duckdblabs.com
psql, pg_dump, and pg_amcheck share code to process object name
patterns like 'foo*.bar*' to match all tables with names starting in
'bar' that are in schemas starting with 'foo'. Before v14, any number
of extra name parts were silently ignored, so a command line '\d
foo.bar.baz.bletch.quux' was interpreted as '\d bletch.quux'. In v14,
as a result of commit 2c8726c4b0, we
instead treated this as a request for table quux in a schema named
'foo.bar.baz.bletch'. That caused problems for people like Justin
Pryzby who were accustomed to copying strings of the form
db.schema.table from messages generated by PostgreSQL itself and using
them as arguments to \d.
Accordingly, revise things so that if an object name pattern contains
more parts than we're expecting, we throw an error, unless there's
exactly one extra part and it matches the current database name.
That way, thisdb.myschema.mytable is accepted as meaning just
myschema.mytable, but otherdb.myschema.mytable is an error, and so
is some.random.garbage.myschema.mytable.
Mark Dilger, per report from Justin Pryzby and discussion among
various people.
Discussion: https://www.postgresql.org/message-id/20211013165426.GD27491%40telsasoft.com
Coverity complains that dpns->outer_plan is deferenced (to obtain
->targetlist) when possibly NULL. We can avoid this by using
dpns->outer_tlist instead, which was already obtained a few lines up.
The fact that we end up with
dpns->inner_tlist = dpns->outer_tlist
is a bit suspicious-looking and maybe worthy of more investigation, but
I'll leave that for another day.
Reviewed-by: Michaël Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/202204191345.qerjy3kxi3eb@alvherre.pgsql
Should have been done this way to start with, but I failed to notice
This way we avoid some pointless initialization, and better contains the
variable to exist in the scope where it is really used.
Reviewed-by: Michaël Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/202204191345.qerjy3kxi3eb@alvherre.pgsql
There's no reason to keep a separate local variable when we have a place
for it elsewhere. This allows to simplify some code.
Reviewed-by: Michaël Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/202204191345.qerjy3kxi3eb@alvherre.pgsql
An ALTER FUNCTION command that tried to update both the function's
proparallel property and its proconfig list failed to do the former,
because it stored the new proparallel value into a tuple that was
no longer the interesting one. Carelessness in 7aea8e4f2.
(I did not bother with a regression test, because the only likely
future breakage would be for someone to ignore the comment I added
and add some other field update after the heap_modify_tuple step.
A test using existing function properties could not catch that.)
Per report from Bryn Llewellyn. Back-patch to all supported branches.
Discussion: https://postgr.es/m/8AC9A37F-99BD-446F-A2F7-B89AD0022774@yugabyte.com
The new numeric code for extract epoch from interval accidentally
truncated the DAYS_PER_YEAR value to an integer, leading to results
that mismatched the floating-point interval_part calculations.
The commit a2da77cdb4 that introduced
this actually contains the regression test change that this reverts.
I suppose this was missed at the time.
Reported-by: Joseph Koshakow <koshy44@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/CAAvxfHd5n%3D13NYA2q_tUq%3D3%3DSuWU-CufmTf-Ozj%3DfrEgt7pXwQ%40mail.gmail.com
Remove meaningless "failures" column from the aggregate logging. It
was just a sum of "serialization failures" and "deadlock failures".
Pointed out by Tom Lane. Patch reviewed by Fabien COELHO.
Discussion: https://postgr.es/m/4183048.1649536705%40sss.pgh.pa.us
It failed to provide an error string as expected for the
admittedly-unlikely case of OOM in pg_cryptohash_create().
Also, make it initialize *errstr to NULL for success,
as pg_md5_binary() does.
Also add missing comments. Readers should not have to
reverse-engineer the API spec for a publicly visible routine.
Don't try to look at the attidentity field of system attributes,
because they're not there in the TupleDescAttr array. Sometimes
this is harmless because we accidentally pick up a zero, but
otherwise we'll report "no owned sequence found" from an attempt
to alter a system attribute. (It seems possible that a SIGSEGV
could occur, too, though I've not seen it in testing.)
It's not in this function's charter to complain that you can't
alter a system column, so instead just hard-wire an assumption
that system attributes aren't identities. I didn't bother with
a regression test because the appearance of the bug is very
erratic.
Per bug #17465 from Roman Zharkov. Back-patch to all supported
branches. (There's not actually a live bug before v12, because
before that get_attidentity() did the right thing anyway.
But for consistency I changed the test in the older branches too.)
Discussion: https://postgr.es/m/17465-f2a554a6cb5740d3@postgresql.org
Checking the execution of archive_cleanup_command on a standby requires
a valid checkpoint coming from its primary, but the logic did not check
that the standby replayed up to the point of the checkpoint, causing the
test checking for the execution of archive_cleanup_command to fail.
This race was more visible in slow environments.
Issue introduced in 46dea24, so no backpatch is needed.
Author: Tom Lane
Discussion: https://postgr.es/m/4015413.1649454951@sss.pgh.pa.us
This test, introduced in df86e52, uses a second standby to check that
it is able to remove correctly RECOVERYHISTORY and RECOVERYXLOG at the
end of recovery. This standby uses the archives of the primary to
restore its contents, with some of the archive's contents coming from
the first standby previously promoted. In slow environments, it was
possible that the test did not check what it should, as the history file
generated by the promotion of the first standby may not be stored yet on
the archives the second standby feeds on. So, it could be possible that
the second standby selects an incorrect timeline, without restoring a
history file at all.
This commits adds a wait phase to make sure that the history file
required by the second standby is archived before this cluster is
created. This relies on poll_query_until() with pg_stat_file() and an
absolute path, something not supported in REL_10_STABLE.
While on it, this adds a new test to check that the history file has
been restored by looking at the logs of the second standby. This
ensures that a RECOVERYHISTORY, whose removal needs to be checked,
is created in the first place. This should make the test more robust.
This test has been introduced by df86e52, but it came in light as an
effect of the bug fixed by acf1dd42, where the extra restore_command
calls made the test much slower.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/YlT23IvsXkGuLzFi@paquier.xyz
Backpatch-through: 11
The new option set of pg_receivewal introduced in 042a923 to control the
compression method makes it now easy to pass down various options,
including the compression level. The change to be able to do is simple,
and requires one LZ4F_preferences_t fed to LZ4F_compressBegin().
Note that LZ4F_INIT_PREFERENCES could be used to initialize the contents
of LZ4F_preferences_t as required by LZ4, but this is only available
since v1.8.3. memset()'ing its structure to 0 is enough.
Discussion: https://postgr.es/m/YlPQGNAAa04raObK@paquier.xyz
The target failed, tested $PATH binaries, or tested a stale temporary
installation. Commit c66b438db6 missed
this. Back-patch to v10 (all supported versions).
Suppress further attempts to read ahead in the WAL if we run out of
data, until the records already decoded have been replayed. This
restores the traditional behavior for continuous archive recovery, which
is to retry the failing restore_command only every 5 seconds. With the
coding in 5dc0418f, we would start retrying every time through the
recovery loop when our WAL decoding window hit the end of the current
segment and we tried to look ahead into a not-yet-available next file.
That was very slow.
Also change the no_readahead_until mechanism to use <= rather than <,
which seems more useful. Otherwise we'd either get one extra unwanted
retry of restore_command, or we'd need to add 1 to an LSN.
No change in behavior for regular streaming. That was already limited
by the flushedUpto variable, which won't be updated until we replay what
we have already.
Reported by Andres Freund while analyzing the failure of a TAP test on
build farm animal skink (investigation ongoing but probably due to
otherwise unrelated timing bugs triggered by this slowness magnified by
valgrind).
Discussion: https://postgr.es/m/20220409005910.alw46xqmmgny2sgr%40alap3.anarazel.de
Previously we didn't, which lead to an assertion failure when resetting
partially loaded statistics. This was encountered on the buildfarm, for
as-of-yet unknown reasons.
Ttighten up a validity check when reading the stats file, verifying 'E'
signals the end of the file (rather than just stopping reading). That's then
used in a test appending to the stats file that crashed before the fix in
pgstat_drop_all_entries().
Reported by buildfarm animals mylodon and kestrel, via Tom Lane.
Discussion: https://postgr.es/m/1656446.1650043715@sss.pgh.pa.us
This function gave the wrong answer when there's more than one
RegisteredSnapshots entry, whether or not any of them is the
CatalogSnapshot. This leads to assertion failure in some scenarios
involving fetching toasted data using a cursor. (As per discussion,
I'm dubious that this is the right contract to be enforcing at all;
but it surely doesn't help to be enforcing it incorrectly.)
Fetching toasted data using a cursor is evidently under-tested,
so add a test case too.
Per report from Erik Rijkers. This is new code, so no need for
back-patch.
Discussion: https://postgr.es/m/dc9dd229-ed30-6c62-4c41-d733ffff776b@xs4all.nl
Per-backend global variables like VacuumPageHit are initialized once per
VACUUM command. This was missed by commit 49c9d9fc, which unified
VACUUM VERBOSE and autovacuum logging. As a result of that oversight,
incorrect values were shown when multiple relations were processed by a
single VACUUM VERBOSE command.
Relations that happened to be processed later on would show "buffer
usage:" values that incorrectly included buffer accesses made while
processing earlier unrelated relations. The same accesses were counted
multiple times.
To fix, take initial values for the tracker variables at the start of
heap_vacuum_rel(), and report delta values later on.
With a pre-v15 server, show NULL for the "ICU Locale" column,
matching what you see in v15 when the database locale isn't ICU.
The previous coding incorrectly repeated datcollate here.
(There's an unfinished discussion about whether to consolidate
these columns in \l output, but in any case we'd want this fix
for \l+ output.)
Euler Taveira, per report from Christoph Berg
Discussion: https://postgr.es/m/YlmIFCqu+TZSW4rB@msg.df7cb.de
ComputeXidHorizons (nee GetOldestXmin) thought that it could identify
walsenders by checking for proc->databaseId == 0. Perhaps that was
safe when the code was written, but it's been wrong at least since
autovacuum was invented. Background processes that aren't connected
to any particular database, such as the autovacuum launcher and
logical replication launcher, look like that too.
This imprecision is harmful because when such a process advertises an
xmin, the result is to hold back dead-tuple cleanup in all databases,
though it'd be sufficient to hold it back in shared catalogs (which
are the only relations such a process can access). Aside from being
generally inefficient, this has recently been seen to cause regression
test failures in the buildfarm, as a consequence of the logical
replication launcher's startup transaction preventing VACUUM from
marking pages of a user table as all-visible.
We only want that global hold-back effect for the case where a
walsender is advertising a hot standby feedback xmin. Therefore,
invent a new PGPROC flag that says that a process' xmin should be
considered globally, and check that instead of using the incorrect
databaseId == 0 test. Currently only a walsender sets that flag,
and only if it is not connected to any particular database. (This is
for bug-compatibility with the undocumented behavior of the existing
code, namely that feedback sent by a client who has connected to a
particular database would not be applied globally. I'm not sure this
is a great definition; however, such a client is capable of issuing
plain SQL commands, and I don't think we want xmins advertised for
such commands to be applied globally. Perhaps this could do with
refinement later.)
While at it, I rewrote the comment in ComputeXidHorizons, and
re-ordered the commented-upon if-tests, to make them match up
for intelligibility's sake.
This is arguably a back-patchable bug fix, but given the lack of
complaints I think it prudent to let it age awhile in HEAD first.
Discussion: https://postgr.es/m/1346227.1649887693@sss.pgh.pa.us
Be consistent about the lines that VACUUM VERBOSE outputs by including
an "index scan not needed: " line for completely empty tables. This
makes the output more readable, especially with multiple distinct VACUUM
operations processed by the same VACUUM command. It's also more
consistent; even empty tables can use the failsafe, which wasn't
reported in the standard way until now.
Follow-up to commit 6e20f460, which taught VACUUM VERBOSE to be more
consistent about reporting on scanned pages with empty tables.
The age of OldestXmin (a.k.a. "removable cutoff") when VACUUM ends often
indicates the approximate number of XIDs consumed while VACUUM ran.
However, there is at least one important exception: the cutoff could be
held back by a snapshot that was acquired before our VACUUM even began.
Successive VACUUM operations may even use exactly the same old cutoff in
extreme cases involving long held snapshots.
The log messages that described how removable cutoff aged (which were
added by commit 872770fd) created the impression that we were reporting
on how VACUUM's usable cutoff advanced while VACUUM ran, which was
misleading in these extreme cases. Fix by using a more general wording.
Per gripe from Tom Lane.
In passing, relocate related instrumentation code for clarity.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/1643035.1650035653@sss.pgh.pa.us
When not loading stats at startup (i.e. pgstat_discard_stats() getting
called), reset timestamps of fixed numbered stats would be left at
0. Oversight in 5891c7a8ed.
Instead use pgstat_reset_after_failure() and add tests verifying that
fixed-numbered reset timestamps are set appropriately.
Reported-By: "David G. Johnston" <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/CAKFQuwamFuaQHKdhcMt4Gbw5+Hca2UE741B8gOOXoA=TtAd2Yw@mail.gmail.com
If a partitioned table has partitions owned by roles other than the
owner of the partitioned table, don't include them in the to-be-
clustered list. This is similar to what VACUUM FULL does (except we do
it sooner, because there is no reason to postpone it). Add a simple
test to verify that only owned partitions are clustered.
While at it, change memory context switch-and-back to occur once per
partition instead of outside of the loop.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20220411140609.GF26620@telsasoft.com
This is to gather some more evidence about why buildfarm member wrasse
is failing. We should revert it (or at least scale it way back) once
that's resolved.
Discussion: https://postgr.es/m/1346227.1649887693@sss.pgh.pa.us
Commit 1a36bc9dba conained some logic that was a little opaque and
could have involved a NULL dereference, as complained about by Coverity.
Make the logic more transparent and in doing so avoid the NULL
dereference.
Only 1 of 3 of these changes appear to be handled by pgindent. That change
is new to v15. The remaining two appear to be left alone by pgindent. The
exact reason for that is not 100% clear to me. It seems related to the
fact that it's a line that contains *only* a single line comment and no
actual code. It does not seem worth investigating this in too much
detail. In any case, these do not conform to our usual practices, so fix
them.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
Input for these should be case-insensitive, but was not completely
so. Comparing to the similar queries for timezone names, I realized
that we'd missed forcing the comparison pattern to lower-case.
With that, it behaves as I expect.
While here, flatten the sub-selects in these queries; I don't
find that those add any readability.
Discussion: https://postgr.es/m/3369130.1649348542@sss.pgh.pa.us
Define "parameters with non-default settings" as being those that
not only have pg_settings.source different from 'default', but
also have a current value different from the hard-wired boot_val.
Adding the latter restriction removes a number of not-very-interesting
cases where the active setting is chosen by initdb but in practice
tends to be the same all the time.
Per discussion with Jonathan Katz.
Discussion: https://postgr.es/m/YlFQLzlPi4QD0wSi@msg.df7cb.de
heap_fetch() used to have a "keep_buf" parameter that told it to return
ownership of the buffer pin to the caller after finding that the
requested tuple TID exists but is invisible to the specified snapshot.
This was thoughtlessly removed in commit 5db6df0c0, which broke
heapam_tuple_lock() (formerly EvalPlanQualFetch) because that function
needs to do more accesses to the tuple even if it's invisible. The net
effect is that we would continue to touch the page for a microsecond or
two after releasing pin on the buffer. Usually no harm would result;
but if a different session decided to defragment the page concurrently,
we could see garbage data and mistakenly conclude that there's no newer
tuple version to chain up to. (It's hard to say whether this has
happened in the field. The bug was actually found thanks to a later
change that allowed valgrind to detect accesses to non-pinned buffers.)
The most reasonable way to fix this is to reintroduce keep_buf,
although I made it behave slightly differently: buffer ownership
is passed back only if there is a valid tuple at the requested TID.
In HEAD, we can just add the parameter back to heap_fetch().
To avoid an API break in the back branches, introduce an additional
function heap_fetch_extended() in those branches.
In HEAD there is an additional, less obvious API change: tuple->t_data
will be set to NULL in all cases where buffer ownership is not returned,
in particular when the tuple exists but fails the time qual (and
!keep_buf). This is to defend against any other callers attempting to
access non-pinned buffers. We concluded that making that change in back
branches would be more likely to introduce problems than cure any.
In passing, remove a comment about heap_fetch that was obsoleted by
9a8ee1dc6.
Per bug #17462 from Daniil Anisimov. Back-patch to v12 where the bug
was introduced.
Discussion: https://postgr.es/m/17462-9c98a0f00df9bd36@postgresql.org
There was a small buglet in commit 52e4f0cd47 whereby a tuple acquired
from cache was not released, giving rise to WARNING messages; fix that.
While at it, restructure the code a bit on stylistic grounds.
Author: Hou zj <houzj.fnst@fujitsu.com>
Reported-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAHut+PvKTyhTBtYCQsP6Ph7=o-oWRSX+v+PXXLXp81-o2bazig@mail.gmail.com
Commit f4fb45d15c misguidedly tried to free some state during aggregate
finalization for json_objectagg. This resulted in attempts to access
freed memory, especially when the function is used as a window function.
Commit 4eb9798879 attempted to ameliorate that, but in fact it should
just be ripped out, which is done here. Also add some regression tests
for json_objectagg in various flavors as a window function.
Original report from Jaime Casanova, diagnosis by Andres Freund.
Discussion: https://postgr.es/m/YkfeMNYRCGhySKyg@ahch-to
The last usage of this argument in this routine can be tracked down to
7e2f9062, aka 11 years ago. Getting rid of this argument can also be an
advantage for extensions calling check_index_is_clusterable(), as it
removes any need to worry about the meaning of what a recheck would be
at this level.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220411140609.GF26620@telsasoft.com
Since babbbb5 and the introduction of LZ4 in pg_receivewal, the
compression of the WAL archived is controlled by two options:
- --compression-method with "gzip", "none" or "lz4" as possible value.
- --compress=N to specify a compression level. This includes a
backward-incompatible change where a value of 0 leads to a failure
instead of no compression enforced.
This commit takes advantage of a4b5754 and 3603f7c to rework the
compression options of pg_receivewal, as of:
- The removal of --compression-method.
- The extenction of --compress to use the same grammar as pg_basebackup,
with a METHOD:DETAIL format, where a METHOD is "gzip", "none" or "lz4"
and a DETAIL is a comma-separated list of options, the only keyword
supported is now "level" to control the compression level. If only an
integer is specified as value of this option, "none" is implied on 0
and "gzip" is implied otherwise. This brings back --compress to be
backward-compatible with ~14, while still supporting LZ4.
This has also the advantage of centralizing the set of checks used by
pg_receivewal to validate its compression options.
Author: Michael Paquier
Reviewed-by: Robert Haas, Georgios Kokolatos
Discussion: https://postgr.es/m/YlPQGNAAa04raObK@paquier.xyz
This reverts commits 0147fc7, 4567596, aa64f23, and 5ecd018.
There is no longer agreement that introducing this function
was the right way to address the problem. The consensus now
seems to favor trying to make a correct value for MaxBackends
available to mdules executing their _PG_init() functions.
Nathan Bossart
Discussion: http://postgr.es/m/20220323045229.i23skfscdbvrsuxa@jrouhaud
Enforce __pg_log_level message filtering centrally in logging.c,
instead of relying on the calling macros to do it. This is more
reliable (e.g. it works correctly for direct calls to pg_log_generic)
and it saves a percent or so of total code size because we get rid of
so many duplicate checks of __pg_log_level.
This does mean that argument expressions in a logging macro will be
evaluated even if we end up not printing anything. That seems of
little concern for INFO and higher levels as those messages are printed
by default, and most of our frontend programs don't even offer a way to
turn them off. I left the unlikely() checks in place for DEBUG
messages, though.
Discussion: https://postgr.es/m/3993549.1649449609@sss.pgh.pa.us
The same structure, with the same set of elements (for none, lz4, gzip
and zstd), exists in compression.h, so let's make use of the centralized
version instead of duplicating things. Some of the variables used
previously for WalCompressionMethod are renamed to stick better with the
new structure and routine names.
WalCompressionMethod was leading to some confusion in walmethods.c, as
it was sometimes used to refer to some data unrelated to WAL.
Reported-by: Robert Haas
Author: Michael Paquier
Reviewed-by: Robert Haas, Georgios Kokolatos
Discussion: https://postgr.es/m/YlPQGNAAa04raObK@paquier.xyz
We were setting MERGE source subplan's targetlist by expanding the
individual attributes of the source relation completely, early in the
parse analysis phase. This failed to work when the condition of an
action included a whole-row reference, causing setrefs.c to error out
with
ERROR: variable not found in subplan target lists
because at that point there is nothing to resolve the whole-row
reference with. We can fix this by having preprocess_targetlist expand
the source targetlist for Vars required from the source rel by all
actions. Moreover, by using this expansion mechanism we can do away
with the targetlist expansion in transformMergeStmt, which is good
because then we no longer pull in columns that aren't needed for
anything.
Add a test case for the problem.
While at it, remove some redundant code in preprocess_targetlist():
MERGE was doing separately what is already being done for UPDATE/DELETE,
so we can just rely on the latter and remove the former. (The handling
of inherited rels was different for MERGE, but that was a no-longer-
necessary hack.)
Fix outdated, related comments for fix_join_expr also.
Author: Richard Guo <guofenglinux@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Joe Wildish <joe@lateraljoin.com>
Discussion: https://postgr.es/m/fab3b90a-914d-46a9-beb0-df011ee39ee5@www.fastmail.com
Compression option handling (level, algorithm or even workers) can be
used across several parts of the system and not only base backups.
Structures, objects and routines are renamed in consequence, to remove
the concept of base backups from this part of the code making this
change straight-forward.
pg_receivewal, that has gained support for LZ4 since babbbb5, will make
use of this infrastructure for its set of compression options, bringing
more consistency with pg_basebackup. This cleanup needs to be done
before releasing a beta of 15. pg_dump is a potential future target, as
well, and adding more compression options to it may happen in 16~.
Author: Michael Paquier
Reviewed-by: Robert Haas, Georgios Kokolatos
Discussion: https://postgr.es/m/YlPQGNAAa04raObK@paquier.xyz
All but a few existing callers assume without checking that this
function succeeds. While it probably will, that's a poor excuse for
not checking. Let's make it return void and instead throw an error
if it doesn't find the block reference. Callers that actually need
to handle the no-such-block case must now use the underlying function
XLogRecGetBlockTagExtended.
In addition to being a bit less error-prone, this should also serve
to suppress some Coverity complaints about XLogRecGetBlockRefInfo.
While at it, clean up some inconsistency about use of the
XLogRecHasBlockRef macro: make XLogRecGetBlockTagExtended use
that instead of open-coding the same condition, and avoid calling
XLogRecHasBlockRef twice in relevant code paths. (That is,
calling XLogRecHasBlockRef followed by XLogRecGetBlockTag is now
deprecated: use XLogRecGetBlockTagExtended instead.)
Patch HEAD only; this doesn't seem to have enough value to consider
a back-branch API break.
Discussion: https://postgr.es/m/425039.1649701221@sss.pgh.pa.us
Remove comment block about how heap page vacuuming used to set tuples
with storage to LP_UNUSED in a rare edge case that can no longer happen
following commit 8523492d4e. The comments seem unnecessary now, since
it's now generally clear that heap vacuuming only applies to LP_DEAD
items from VACUUM's first heap pass following more recent work from
commits 12b5ade902 and 4f8d9d1217.
As of commit 39969e2a1, no caller of do_pg_backup_start() passes NULL
for labelfile or tblspcmapfile, nor is it plausible that any would
do so in the future. Remove the code that coped with that case,
as (a) it's dead and (b) it causes Coverity to bleat about possibly
leaked storage.
While here, do some janitorial work on the function's header comment.
\dconfig without an argument originally printed all parameters,
but it seems more useful to print only those parameters with
non-default settings. You can easily get the show-everything
behavior with "\dconfig *", but that output is unwieldy and
seems unlikely to be wanted very often.
Per suggestion from Christoph Berg.
Discussion: https://postgr.es/m/YlFQLzlPi4QD0wSi@msg.df7cb.de
With nowait passed as false, pgstat_lock_entry() must return true
so there's no need to check its result. Coverity seems unconvinced
of this, so whack it upside the head with a (void) cast.
The existing coding resulted in touching every copyright-containing
file in the tree, even if it was already up to date. That doesn't
matter much for the annual run, but it's an annoyance if you try
to use the script for mop-up at the close of a devel cycle, as
I just did.
Discussion: https://postgr.es/m/266030.1649685473@sss.pgh.pa.us
Commit 4a7e964fc6 made pgperlsyncheck fail, but apparently nobody
noticed, although the buildfarm module that does more or less the same
thing was modified. So fix the in-core test. I will look at unifying the
two sets of tests so we avoid a future mismatch.
These apply to traces from Test::More functions such as ok(), is(),
diag() and note(). Output from other sources (e.g. external programs
such a initdb) is not affected. The elapsed time is the time since the
last such trace (or the beginning of the test in the first case). Times
and timestamps are at millisecond precision.
Discussion: https://postgr.es/m/20220401172150.rsycz4lrn7ewruil@alap3.anarazel.de
wrasse, at least, moans about the lack of any "return" statement
in these functions. You'd think pretty much everything would
know that exit(1) doesn't return, but evidently not.
Get rid of the separate "FATAL" log level, as it was applied
so inconsistently as to be meaningless. This mostly involves
s/pg_log_fatal/pg_log_error/g.
Create a macro pg_fatal() to handle the common use-case of
pg_log_error() immediately followed by exit(1). Various
modules had already invented either this or equivalent macros;
standardize on pg_fatal() and apply it where possible.
Invent the ability to add "detail" and "hint" messages to a
frontend message, much as we have long had in the backend.
Except where rewording was needed to convert existing coding
to detail/hint style, I have (mostly) resisted the temptation
to change existing message wording.
Patch by me. Design and patch reviewed at various stages by
Robert Haas, Kyotaro Horiguchi, Peter Eisentraut and
Daniel Gustafsson.
Discussion: https://postgr.es/m/1363732.1636496441@sss.pgh.pa.us
Before commit 412ad7a556, delayChkpt
was a Boolean. Now it's an integer. Extensions using it need to be
appropriately updated, so let's rename the field to make sure that
a hard compilation failure occurs.
Replacing delayChkpt with delayChkptFlags made a few comments extend
past 80 characters, so I reflowed them and changed some wording very
slightly.
The back-branches will need a different change to restore compatibility
with existing minor releases; this is just for master.
Per suggestion from Tom Lane.
Discussion: http://postgr.es/m/a7880f4d-1d74-582a-ada7-dad168d046d1@enterprisedb.com
Commit 5a2832465f added
addFooterToPublicationDesc() as a wrapper around
printTableAddFooter(). The translation marker _() was moved to the
body of addFooterToPublicationDesc(), but addFooterToPublicationDesc()
was not added to GETTEXT_TRIGGERS, so those strings were lost for
translation. To fix, add the translation markers to the call sites of
addFooterToPublicationDesc() and remove the translation marker from
the body of the function. This seems easiest since there were only
two callers and it keeps the API consistent with
printTableAddFooter(). While we're here, add some const decorations
to the prototype of addFooterToPublicationDesc() for consistency with
printTableAddFooter().
Up until now, we've had a policy of only marking certain variables
in the PostgreSQL header files with PGDLLIMPORT, but now we've
decided to mark them all. This means that extensions running on
Windows should no longer operate at a disadvantage as compared to
extensions running on Linux: if the variable is present in a header
file, it should be accessible.
Discussion: http://postgr.es/m/CA+TgmoYanc1_FSfimhgiWSqVyP5KKmh5NP2BWNwDhO8Pg2vGYQ@mail.gmail.com
These are usually not useful since users will use packaged
distributions and won't be interested in rebuilding their installation
from source. Also, we have only used these kinds of hints for some
features and in some places, not consistently throughout.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/2552aed7-d0e9-280a-54aa-2dc7073f371d%40enterprisedb.com
Previously, the output of EXPLAIN (BUFFERS) option showed only the I/O
timing spent reading and writing shared and local buffers. This commit
adds on top of that the I/O timing for temporary buffers in the output
of EXPLAIN (for spilled external sorts, hashes, materialization. etc).
This can be helpful for users in cases where the I/O related to
temporary buffers is the bottleneck.
Like its cousin, this information is available only when track_io_timing
is enabled. Playing the patch, this is showing an extra overhead of up
to 1% even when using gettimeofday() as implementation for interval
timings, which is slightly within the usual range noise still that's
measurable.
Author: Masahiko Sawada
Reviewed-by: Georgios Kokolatos, Melanie Plageman, Julien Rouhaud,
Ranier Vilela
Discussion: https://postgr.es/m/CAD21AoAJgotTeP83p6HiAGDhs_9Fw9pZ2J=_tYTsiO5Ob-V5GQ@mail.gmail.com
With -DCATCACHE_FORCE_RELEASE a few tests failed. Those were trying to test
behavior in the absence of invalidation processing and
-DCATCACHE_FORCE_RELEASE obviously adds a lot of invalidation processing. The
test already tried to handle debug_discard_caches > 0, by disabling it for
individual tests.
Instead hide potentially problematic function calls in a wrapper function that
catches the does-not-exist error. The error isn't the actually interesting
bit, it's whether the stats entry still exist afterwards.
I confirmed that the tests still catches leaked function stats if I nuke the
protections against that in pgstat_function.c.
Per buildfarm animal prion.
Discussion: https://postgr.es/m/20220407165709.jgdkrzqlkcwue6ko@alap3.anarazel.de
- subscriber stats reset path was untested
- slot stat sreset path for all slots was untested
- pg_stat_database.sessions etc was untested
- pg_stat_reset_shared() was untested, for any kind of shared stats
- pg_stat_reset() was untested
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Reclaim space from the line pointer array when heap pruning leaves
behind a contiguous group of LP_UNUSED items at the end of the array.
This happens during subsequent page defragmentation. Certain kinds of
heap line pointer bloat are ameliorated by this new optimization.
Follow-up work to commit 3c3b8a4b26, which taught VACUUM to truncate the
line pointer array in about the same way during VACUUM's second pass
over the heap. We now apply line pointer array truncation during both
the first and the second pass over the heap made by VACUUM. We can also
perform line pointer array truncation during opportunistic pruning.
Matthias van de Meent, with small tweaks by me.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAEze2WjgaQc55Y5f5CQd3L=eS5CZcff2Obxp=O6pto8-f0hC4w@mail.gmail.com
Discussion: https://postgr.es/m/CAEze2Wg36%2B4at2eWJNcYNiW2FJmht34x3YeX54ctUSs7kKoNcA%40mail.gmail.com
Window functions such as row_number() always return a value higher than
the previously returned value for tuples in any given window partition.
Traditionally queries such as;
SELECT * FROM (
SELECT *, row_number() over (order by c) rn
FROM t
) t WHERE rn <= 10;
were executed fairly inefficiently. Neither the query planner nor the
executor knew that once rn made it to 11 that nothing further would match
the outer query's WHERE clause. It would blindly continue until all
tuples were exhausted from the subquery.
Here we implement means to make the above execute more efficiently.
This is done by way of adding a pg_proc.prosupport function to various of
the built-in window functions and adding supporting code to allow the
support function to inform the planner if the window function is
monotonically increasing, monotonically decreasing, both or neither. The
planner is then able to make use of that information and possibly allow
the executor to short-circuit execution by way of adding a "run condition"
to the WindowAgg to allow it to determine if some of its execution work
can be skipped.
This "run condition" is not like a normal filter. These run conditions
are only built using quals comparing values to monotonic window functions.
For monotonic increasing functions, quals making use of the btree
operators for <, <= and = can be used (assuming the window function column
is on the left). You can see here that once such a condition becomes false
that a monotonic increasing function could never make it subsequently true
again. For monotonically decreasing functions the >, >= and = btree
operators for the given type can be used for run conditions.
The best-case situation for this is when there is a single WindowAgg node
without a PARTITION BY clause. Here when the run condition becomes false
the WindowAgg node can simply return NULL. No more tuples will ever match
the run condition. It's a little more complex when there is a PARTITION
BY clause. In this case, we cannot return NULL as we must still process
other partitions. To speed this case up we pull tuples from the outer
plan to check if they're from the same partition and simply discard them
if they are. When we find a tuple belonging to another partition we start
processing as normal again until the run condition becomes false or we run
out of tuples to process.
When there are multiple WindowAgg nodes to evaluate then this complicates
the situation. For intermediate WindowAggs we must ensure we always
return all tuples to the calling node. Any filtering done could lead to
incorrect results in WindowAgg nodes above. For all intermediate nodes,
we can still save some work when the run condition becomes false. We've
no need to evaluate the WindowFuncs anymore. Other WindowAgg nodes cannot
reference the value of these and these tuples will not appear in the final
result anyway. The savings here are small in comparison to what can be
saved in the top-level WingowAgg, but still worthwhile.
Intermediate WindowAgg nodes never filter out tuples, but here we change
WindowAgg so that the top-level WindowAgg filters out tuples that don't
match the intermediate WindowAgg node's run condition. Such filters
appear in the "Filter" clause in EXPLAIN for the top-level WindowAgg node.
Here we add prosupport functions to allow the above to work for;
row_number(), rank(), dense_rank(), count(*) and count(expr). It appears
technically possible to do the same for min() and max(), however, it seems
unlikely to be useful enough, so that's not done here.
Bump catversion
Author: David Rowley
Reviewed-by: Andy Fan, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvqvp3At8++yF8ij06sdcoo1S_b2YoaT9D4Nf+MObzsrLQ@mail.gmail.com
Previously none of our tests triggered recovery conflicts. The test is
primarily motivated by needing tests for recovery conflict stats for shared
memory based pgstats. But it's also a decent start for recovery conflict
handling in general.
The only type of recovery conflict not tested yet are rcovery deadlock
conflicts.
By configuring log_recovery_conflict_waits the test adds some very minimal
testing for that path as well.
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Tests that standbys:
- drop stats for objects when the those records are replayed
- persist stats across graceful restarts
- discard stats after immediate / crash restarts
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Plain \dconfig is basically equivalent to SHOW except that you can
give it a pattern with wildcards, either to match multiple GUCs or
because you don't exactly remember the name you want.
\dconfig+ adds type, context, and access-privilege information,
mainly because every other kind of object privilege has a psql command
to show it, so GUC privileges should too. (A form of this command was
in some versions of the patch series leading up to commit a0ffa885e.
We pulled it out then because of doubts that the design and code were
up to snuff, but I think subsequent work has resolved that.)
In passing, fix incorrect completion of GUC names in GRANT/REVOKE
ON PARAMETER: a0ffa885e neglected to use the VERBATIM form of
COMPLETE_WITH_QUERY, so it misbehaved for custom (qualified) GUC
names.
Mark Dilger and Tom Lane
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
Test that stats are restored during normal restarts, discarded after a crash /
immediate restart, and that a corrupted stats file leads to stats being reset.
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Modify the subroutines called by RI trigger functions that want to check
if a given referenced value exists in the referenced relation to simply
scan the foreign key constraint's unique index, instead of using SPI to
execute
SELECT 1 FROM referenced_relation WHERE ref_key = $1
This saves a lot of work, especially when inserting into or updating a
referencing relation.
This rewrite allows to fix a PK row visibility bug caused by a partition
descriptor hack which requires ActiveSnapshot to be set to come up with
the correct set of partitions for the RI query running under REPEATABLE
READ isolation. We now set that snapshot indepedently of the snapshot
to be used by the PK index scan, so the two no longer interfere. The
buggy output in src/test/isolation/expected/fk-snapshot.out of the
relevant test case added by commit 00cb86e75d has been corrected.
(The bug still exists in branch 14, however, but this fix is too
invasive to backpatch.)
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Li Japin <japinli@hotmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CA+HiwqGkfJfYdeq5vHPh6eqPKjSbfpDDY+j-kXYFePQedtSLeg@mail.gmail.com
They are to check the behavior of RI_FKey_check() and
ri_Check_Pk_Match(). A test case whereby RI_FKey_check() queries a
partitioned PK table under REPEATABLE READ isolation produces wrong
output due to a bug of the partition-descriptor logic and that is noted
as such in the comment in the test. A subsequent commit will fix the
bug and replace the buggy output by the correct one.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/1627848.1636676261@sss.pgh.pa.us
Add support for unlogged sequences. Unlike for unlogged tables, this
is not a performance feature. It allows sequences associated with
unlogged tables to be excluded from replication.
A new subcommand ALTER SEQUENCE ... SET LOGGED/UNLOGGED is added.
An identity/serial sequence now automatically gets and follows the
persistence level (logged/unlogged) of its owning table. (The
sequences owned by temporary tables were already temporary through the
separate mechanism in RangeVarAdjustRelationPersistence().) But you
can still change the persistence of an owned sequence separately.
Also, pg_dump and pg_upgrade preserve the persistence of existing
sequences.
Discussion: https://www.postgresql.org/message-id/flat/04e12818-2f98-257c-b926-2845d74ed04f%402ndquadrant.com
It might be worth instead splitting the test up to produce a smaller
alternative output file. But that's not trivial either, due to the number of
steps defined. And more than I want to do tonight.
Per buildfarm.
Introduce a new GUC recovery_prefetch. When enabled, look ahead in the
WAL and try to initiate asynchronous reading of referenced data blocks
that are not yet cached in our buffer pool. For now, this is done with
posix_fadvise(), which has several caveats. Since not all OSes have
that system call, "try" is provided so that it can be enabled where
available. Better mechanisms for asynchronous I/O are possible in later
work.
Set to "try" for now for test coverage. Default setting to be finalized
before release.
The GUC wal_decode_buffer_size limits the distance we can look ahead in
bytes of decoded data.
The existing GUC maintenance_io_concurrency is used to limit the number
of concurrent I/Os allowed, based on pessimistic heuristics used to
infer that I/Os have begun and completed. We'll also not look more than
maintenance_io_concurrency * 4 block references ahead.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (earlier version)
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (earlier version)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (earlier version)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com> (earlier version)
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> (earlier version)
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Change two macros to be static inline functions instead to keep the
data type consistent. This avoids a "comparison is always true"
warning that was occurring with -Wtype-limits. In the process, change
the names to look less like macros.
Discussion: https://postgr.es/m/20220407063505.njnnrmbn4sxqfsts@alap3.anarazel.de
In the stats collector days it was hard to write tests for the stats system,
because fundamentally delivery of stats messages over UDP was not
synchronous (nor guaranteed). Now we easily can force pending stats updates to
be flushed synchronously.
This moves stats.sql into a parallel group, there isn't a reason for it to run
in isolation anymore. And it may shake out some bugs.
Bumps catversion.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Just after committing 5891c7a8ed, a test running with debug_discard_caches=1
failed locally...
pgstat_drop_relation() neither checked pgstat_should_count_relation() nor
called pgstat_prep_relation_pending(). With debug_discard_caches=1
rel->pgstat_info wasn't set up, leading pg_stat_get_xact_tuples_inserted()
spuriously still returning > 0 while in the transaction dropping the table.
Zeroing out an lwlock in a normal build turns out to not trigger any alarms,
if nobody can use the lwlock at that moment (as the case here). But with
--disable-spinlocks --disable-atomics, the sema field needs to be initialized.
We probably should make sure that this fails on more common configurations as
well...
Per buildfarm animal rorqual
Broke with 5c279a6d35. But looks like it had been half-broken since
70e81861fa, because 'rmid' didn't refer to the current record's rmid anymore,
but to rmid from "Initialize resource managers" - a constant.
Allow extensions to specify a new custom resource manager (rmgr),
which allows specialized WAL. This is meant to be used by a Table
Access Method or Index Access Method.
Prior to this commit, only Generic WAL was available, which offers
support for recovery and physical replication but not logical
replication.
Reviewed-by: Julien Rouhaud, Bharath Rupireddy, Andres Freund
Discussion: https://postgr.es/m/ed1fb2e22d15d3563ae0eb610f7b61bb15999c0a.camel%40j-davis.com
This change affects SubTransGetTopmostTransaction(), used to find the
topmost transaction ID of a given transaction ID. The cache is able to
store one value, so as we can save the backend from unnecessary lookups
at pg_subtrans/ on repetitive calls of this routine. There is a similar
practice in transam.c, for example.
Author: Simon Riggs
Reviewed-by: Andrey Borodin, Julien Rouhaud
Discussion: https://postgr.es/m/CANbhV-G8Co=yq4v4BkW7MJDqVt68K_8A48nAZ_+8UQS7LrwLEQ@mail.gmail.com
With stats now being stored in shared memory, the GUC isn't needed
anymore. However, the pg_stat_tmp directory and PG_STAT_TMP_DIR define are
kept, as pg_stat_statements (and some out-of-core extensions) store data in
it.
Docs will be updated in a subsequent commit, together with the other pending
docs updates due to shared memory stats.
Author: Andres Freund <andres@anarazel.de>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220330233550.eiwsbearu6xhuqwe@alap3.anarazel.de
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Previously the statistics collector received statistics updates via UDP and
shared statistics data by writing them out to temporary files regularly. These
files can reach tens of megabytes and are written out up to twice a
second. This has repeatedly prevented us from adding additional useful
statistics.
Now statistics are stored in shared memory. Statistics for variable-numbered
objects are stored in a dshash hashtable (backed by dynamic shared
memory). Fixed-numbered stats are stored in plain shared memory.
The header for pgstat.c contains an overview of the architecture.
The stats collector is not needed anymore, remove it.
By utilizing the transactional statistics drop infrastructure introduced in a
prior commit statistics entries cannot "leak" anymore. Previously leaked
statistics were dropped by pgstat_vacuum_stat(), called from [auto-]vacuum. On
systems with many small relations pgstat_vacuum_stat() could be quite
expensive.
Now that replicas drop statistics entries for dropped objects, it is not
necessary anymore to reset stats when starting from a cleanly shut down
replica.
Subsequent commits will perform some further code cleanup, adapt docs and add
tests.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@2ndquadrant.com> (in a much earlier version)
Reviewed-By: Arthur Zakirov <a.zakirov@postgrespro.ru> (in a much earlier version)
Reviewed-By: Antonin Houska <ah@cybertec.at> (in a much earlier version)
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Discussion: https://postgr.es/m/20210319235115.y3wz7hpnnrshdyv6@alap3.anarazel.de
Most of pgstat uses pgstat_<verb>_<subject>() or just <verb>_<subject>(). But
not all (some introduced fairly recently by me). Rename ones that aren't
intentionally following a different scheme (e.g. AtEOXact_*).
The column 'subskiplsn' uses TYPALIGN_DOUBLE (which has 4 bytes alignment
on AIX) for storage. But the C Struct (Form_pg_subscription) has 8-byte
alignment for this field, so retrieving it from storage causes an
unaligned read.
To fix this, we rearranged the 'subskiplsn' column in the catalog so that
it naturally comes at an 8-byte boundary.
We have fixed a similar problem in commit f3b421da5f. This patch adds a
test to avoid a similar mistake in the future.
Reported-by: Noah Misch
Diagnosed-by: Noah Misch, Masahiko Sawada, Amit Kapila
Author: Masahiko Sawada
Reviewed-by: Noah Misch, Amit Kapila
Discussion: https://postgr.es/m/20220401074423.GC3682158@rfd.leadboat.comhttps://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
Previously the pgstat <-> replication slots API was done with on the basis of
names. However, the upcoming move to storing stats in shared memory makes it
more convenient to use a integer as key.
Change the replication slot functions to take the slot rather than the slot
name, and expose ReplicationSlotIndex() to compute the index of an replication
slot. Special handling will be required for restarts, as the index is not
stable across restarts. For now pgstat internally still uses names.
Rename pgstat_report_replslot_{create,drop}() to
pgstat_{create,drop}_replslot() to match the functions for other kinds of
stats.
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
One problematic part of the current statistics collector design is that there
is no reliable way of getting rid of statistics entries. Because of that
pgstat_vacuum_stat() (called by [auto-]vacuum) matches all stats for the
current database with the catalog contents and tries to drop now-superfluous
entries. That's quite expensive. What's worse, it doesn't work on physical
replicas, despite physical replicas collection statistics entries.
This commit introduces infrastructure to create / drop statistics entries
transactionally, together with the underlying catalog objects (functions,
relations, subscriptions). pgstat_xact.c maintains a list of stats entries
created / dropped transactionally in the current transaction. To ensure the
removal of statistics entries is durable dropped statistics entries are
included in commit / abort (and prepare) records, which also ensures that
stats entries are dropped on standbys.
Statistics entries created separately from creating the underlying catalog
object (e.g. when stats were previously lost due to an immediate restart)
are *not* WAL logged. However that can only happen outside of the transaction
creating the catalog object, so it does not lead to "leaked" statistics
entries.
For this to work, functions creating / dropping functions / relations /
subscriptions need to call into pgstat. For subscriptions this was already
done when dropping subscriptions, via pgstat_report_subscription_drop() (now
renamed to pgstat_drop_subscription()).
This commit does not actually drop stats yet, it just provides the
infrastructure. It is however a largely independent piece of infrastructure,
so committing it separately makes sense.
Bumps XLOG_PAGE_MAGIC.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
With the introduction of PgStat_Kind PgStat_Single_Reset_Type,
PgStat_Shared_Reset_Target don't make sense anymore. Replace them with
PgStat_Kind.
Instead of having dedicated reset functions for different kinds of stats, use
two generic helper routines (one to reset all stats of a kind, one to reset
one stats entry).
A number of reset functions were named pgstat_reset_*_counter(), despite
affecting multiple counters. The generic helper routines get rid of
pgstat_reset_single_counter(), pgstat_reset_subscription_counter().
Rename pgstat_reset_slru_counter(), pgstat_reset_replslot_counter() to
pgstat_reset_slru(), pgstat_reset_replslot() respectively, and have them only
deal with a single SLRU/slot. Resetting all SLRUs/slots goes through the
generic pgstat_reset_of_kind().
Previously pg_stat_reset_replication_slot() used SearchNamedReplicationSlot()
to check if a slot exists. API wise it seems better to move that to
pgstat_replslot.c.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
This option is useful to do a rewind with the server configuration file
(aka postgresql.conf) located outside the data directory, which is
something that some Linux distributions and some HA tools like to rely
on. As a result, this can simplify the logic around a rewind by
avoiding the copy of such files before running pg_rewind.
This option affects pg_rewind when it internally starts the target
cluster with some "postgres" commands, adding -c config_file=FILE to the
command strings generated, when:
- retrieving a restore_command using a "postgres -C" command for
-c/--restore-target-wal.
- forcing crash recovery once to get the cluster into a clean shutdown
state.
Author: Gunnar "Nick" Bluth
Reviewed-by: Michael Banck, Alexander Kukushkin, Michael Paquier,
Alexander Alekseev
Discussion: https://postgr.es/m/7c59265d-ac50-b0aa-ca1e-65e8bd27642a@pro-open.de
This seems beneficial on high-core-count machines, and not harmful
on lesser hardware. However, older ARM32 gear doesn't have this
instruction, so restrict the patch to ARM64.
Geoffrey Blake
Discussion: https://postgr.es/m/78338F29-9D7F-4DC8-BD71-E9674CE71425@amazon.com
Until now index_concurrently_swap() directly modified pgstat internal
datastructures. That will break with the introduction of shared memory
statistics and seems off architecturally.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Only the pgstat_send_* functions that are called from outside pgstat*.c are
renamed (the rest will go away). This is done separately from the - quite
large - shared memory statistics patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
Soon the stats collector will be no more, with statistics instead getting
stored in shared memory. There are a lot of references to the stats collector
in comments. This commit replaces most of these references with "cumulative
statistics system", with the remaining ones getting replaced as part of
subsequent commits.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
The transactional integration code is largely independent from the rest of
pgstat.c. Subsequent commits will add more related code.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
It might seem pointless to allow use of dsm in single user mode, but otherwise
subsystems might need dedicated single user mode code paths.
Besides changing the assert, all that's needed is to make some windows code
assuming the presence of postmaster conditional.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGL9hY_VY=+oUK+Gc1iSRx-Ls5qeYJ6q=dQVZnT3R63Taw@mail.gmail.com
Exclusive-mode backups have been deprecated since 9.6 (when
non-exclusive backups were introduced) due to the issues
they can cause should the system crash while one is running and
generally because non-exclusive provides a much better interface.
Further, exclusive backup mode wasn't really being tested (nor was most
of the related code- like being able to log in just to stop an exclusive
backup and the bits of the state machine related to that) and having to
possibly deal with an exclusive backup and the backup_label file
existing during pg_basebackup, pg_rewind, etc, added other complexities
that we are better off without.
This patch removes the exclusive backup mode, the various special cases
for dealing with it, and greatly simplifies the online backup code and
documentation.
Authors: David Steele, Nathan Bossart
Reviewed-by: Chapman Flack
Discussion: https://postgr.es/m/ac7339ca-3718-3c93-929f-99e725d1172c@pgmasters.nethttps://postgr.es/m/CAHg+QDfiM+WU61tF6=nPZocMZvHDzCK47Kneyb0ZRULYzV5sKQ@mail.gmail.com
This patch allows "PGC_SUSET" parameters to be set by non-superusers
if they have been explicitly granted the privilege to do so.
The privilege to perform ALTER SYSTEM SET/RESET on a specific parameter
can also be granted.
Such privileges are cluster-wide, not per database. They are tracked
in a new shared catalog, pg_parameter_acl.
Granting and revoking these new privileges works as one would expect.
One caveat is that PGC_USERSET GUCs are unaffected by the SET privilege
--- one could wish that those were handled by a revocable grant to
PUBLIC, but they are not, because we couldn't make it robust enough
for GUCs defined by extensions.
Mark Dilger, reviewed at various times by Andrew Dunstan, Robert Haas,
Joshua Brindle, and myself
Discussion: https://postgr.es/m/3D691E20-C1D5-4B80-8BA5-6BEB63AF3029@enterprisedb.com
The test created a 1m row table in order to test parallel operation of
JSON_VALUE. However, this was more than were needed for the test, so
save time by halving it, and also by making the table unlogged.
Experimentation shows that this size is only a little above the number
required to generate the expected output.
Per gripe from Andres Freund
Discussion: https://postgr.es/m/20220406022118.3ocqvhxr6kciw5am@alap3.anarazel.de
In commit 27e1f1456, create_append_plan() only allowed the subplan
created from a given subpath to be executed asynchronously when it was
an async-capable ForeignPath. To extend coverage, this patch handles
cases when the given subpath includes some other Path types as well that
can be omitted in the plan processing, such as a ProjectionPath directly
atop an async-capable ForeignPath, allowing asynchronous execution in
partitioned-scan/partitioned-join queries with non-Var tlist expressions
and more UNION queries.
Andrey Lepikhov and Etsuro Fujita, reviewed by Alexander Pyhalov and
Zhihong Yu.
Discussion: https://postgr.es/m/659c37a8-3e71-0ff2-394c-f04428c76f08%40postgrespro.ru
