This commit reorders the paragraphs of the Notes section in order of
importance, and clarifies better the safe uses of pg_checksums for
replication setups.
Author: Fabien Coelho
Discussion: https://postgr.es/m/alpine.DEB.2.21.1903231404280.18811@lancre
Especially, warn about the hazards of mishandling the backup_label
file. Adjust a couple of server messages to be more clear about
the hazards associated with removing backup_label files, too.
David Steele and Robert Haas, reviewed by Laurenz Albe, Martín
Marqués, Peter Eisentraut, and Magnus Hagander.
Discussion: http://postgr.es/m/7d85c387-000e-16f0-e00b-50bf83c22127@pgmasters.net
The previous code was adding pointers to transient variables to a
list, but by the time the list was read, the variable might be gone,
depending on the compiler. Fix it by making copies in the proper
memory context.
This adds the CONCURRENTLY option to the REINDEX command. A REINDEX
CONCURRENTLY on a specific index creates a new index (like CREATE
INDEX CONCURRENTLY), then renames the old index away and the new index
in place and adjusts the dependencies, and then drops the old
index (like DROP INDEX CONCURRENTLY). The REINDEX command also has
the capability to run its other variants (TABLE, DATABASE) with the
CONCURRENTLY option (but not SYSTEM).
The reindexdb command gets the --concurrently option.
Author: Michael Paquier, Andreas Karlsson, Peter Eisentraut
Reviewed-by: Andres Freund, Fujii Masao, Jim Nasby, Sergei Kornilov
Discussion: https://www.postgresql.org/message-id/flat/60052986-956b-4478-45ed-8bd119e9b9cf%402ndquadrant.com#74948a1044c56c5e817a5050f554ddee
This moves the responsibility for:
- creating the storage necessary for a relation, including creating a
new relfilenode for a relation with existing storage
- non-transactional truncation of a relation
- VACUUM FULL / CLUSTER's rewrite of a table
below tableam.
This is fairly straight forward, with a bit of complexity smattered in
to move the computation of xid / multixid horizons below the AM, as
they don't make sense for every table AM.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
There were multiple issues in deserialization of pg_mcv_list values.
Firstly, the data is loaded from syscache, but the deserialization was
performed after ReleaseSysCache(), at which point the data might have
already disappeared. Fixed by moving the calls in statext_mcv_load,
and using the same NULL-handling code as existing stats.
Secondly, the deserialized representation used pointers into the
serialized representation. But that is also unsafe, because the data
may disappear at any time. Fixed by reworking and simplifying the
deserialization code to always copy all the data.
And thirdly, when deserializing values for types passed by value, the
code simply did memcpy(d,s,typlen) which however does not work on
bigendian machines. Fixed by using fetch_att/store_att_byval.
Provide GetTopFullTransactionId() and GetCurrentFullTransactionId().
The intended users of these interfaces are access methods that use
xids for visibility checks but don't want to have to go back and
"freeze" existing references some time later before the 32 bit xid
counter wraps around.
Use a new struct to serialize the transaction state for parallel
query, because FullTransactionId doesn't fit into the previous
serialization scheme very well.
Author: Thomas Munro
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/CAA4eK1%2BMv%2Bmb0HFfWM9Srtc6MVe160WFurXV68iAFMcagRZ0dQ%40mail.gmail.com
Instead of inferring epoch progress from xids and checkpoints,
introduce a 64 bit FullTransactionId type and use it to track xid
generation. This fixes an unlikely bug where the epoch is reported
incorrectly if the range of active xids wraps around more than once
between checkpoints.
The only user-visible effect of this commit is to correct the epoch
used by txid_current() and txid_status(), also visible with
pg_controldata, in those rare circumstances. It also creates some
basic infrastructure so that later patches can use 64 bit
transaction IDs in more places.
The new type is a struct that we pass by value, as a form of strong
typedef. This prevents the sort of accidental confusion between
TransactionId and FullTransactionId that would be possible if we
were to use a plain old uint64.
Author: Thomas Munro
Reported-by: Amit Kapila
Reviewed-by: Andres Freund, Tom Lane, Heikki Linnakangas
Discussion: https://postgr.es/m/CAA4eK1%2BMv%2Bmb0HFfWM9Srtc6MVe160WFurXV68iAFMcagRZ0dQ%40mail.gmail.com
To support building indexes over tables of different AMs, the scans to
do so need to be routed through the table AM. While moving a fair
amount of code, nearly all the changes are just moving code to below a
callback.
Currently the range based interface wouldn't make much sense for non
block based table AMs. But that seems aceptable for now.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
The makefile rule for the (rarely used) plain-text output postgres.txt
was still written to use lynx, but in
96b8b8b6f9, where the INSTALL file was
switched to pandoc, the rest of the makefile support for lynx was
removed, so this was broken. Rewrite the rule to also use pandoc for
postgres.txt.
The MCV build should always call get_mincount_for_mcv_list(), as the
there is no other logic to decide whether the MCV list represents all
the data. So just remove the (ngroups > nitems) condition.
Also, when building MCV lists, the number of items was limited by the
statistics target (i.e. up to 10000). But when deserializing the MCV
list, a different value (8192) was used to check the input, causing
an error. Simply ensure that the same value is used in both places.
This should have been included in 7300a69950, but I forgot to include it
in that commit.
Introduce a third extended statistic type, supported by the CREATE
STATISTICS command - MCV lists, a generalization of the statistic
already built and used for individual columns.
Compared to the already supported types (n-distinct coefficients and
functional dependencies), MCV lists are more complex, include column
values and allow estimation of much wider range of common clauses
(equality and inequality conditions, IS NULL, IS NOT NULL etc.).
Similarly to the other types, a new pseudo-type (pg_mcv_list) is used.
Author: Tomas Vondra
Reviewed-by: Dean Rasheed, David Rowley, Mark Dilger, Alvaro Herrera
Discussion: https://postgr.es/m/dfdac334-9cf2-2597-fb27-f0fb3753f435@2ndquadrant.com
In the dim past, the planner kept the fully-processed version of the query
targetlist (the result of preprocess_targetlist) in grouping_planner's
local variable "tlist", and only grudgingly passed it to individual other
routines as needed. Later we discovered a need to still have it available
after grouping_planner finishes, and invented the root->processed_tlist
field for that purpose, but it wasn't used internally to grouping_planner;
the tlist was still being passed around separately in the same places as
before.
Now comes a proposed patch to allow appendrel expansion to add entries
to the processed tlist, well after preprocess_targetlist has finished
its work. To avoid having to pass around the tlist explicitly, it's
proposed to allow appendrel expansion to modify root->processed_tlist.
That makes aliasing the tlist with assorted parameters and local
variables really scary. It would accidentally work as long as the
tlist is initially nonempty, because then the List header won't move
around, but it's not exactly hard to think of ways for that to break.
Aliased values are poor programming practice anyway.
Hence, get rid of local variables and parameters that can be identified
with root->processed_tlist, in favor of just using that field directly.
And adjust comments to match. (Some of the new comments speak as though
it's already possible for appendrel expansion to modify the tlist; that's
not true yet, but will happen in a later patch.)
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
The new function is only in charge of meta commands, not SQL commands.
This change makes the code a little clearer: now all the state changes
are effected by advanceConnectionState. It also removes one indent
level, which makes the diff look bulkier than it really is.
Author: Fabien Coelho
Reviewed-by: Kirk Jamison
Discussion: https://postgr.es/m/alpine.DEB.2.21.1811240904500.12627@lancre
Column references are not allowed in default expressions and partition
bound expressions, and are restricted as such once the transformation of
their expressions is done. However, trying to use more complex column
references can lead to confusing error messages. For example, trying to
use a two-field column reference name for default expressions and
partition bounds leads to "missing FROM-clause entry for table", which
makes no sense in their respective context.
In order to make the errors generated more useful, this commit adds more
verbose messages when transforming column references depending on the
context. This has a little consequence though: for example an
expression using an aggregate with a column reference as argument would
cause an error to be generated for the column reference, while the
aggregate was the problem reported before this commit because column
references get transformed first.
The confusion exists for default expressions for a long time, and the
problem is new as of v12 for partition bounds. Still per the lack of
complaints on the matter no backpatch is done.
The patch has been written by Amit Langote and me, and Tom Lane has
provided the improvement of the documentation for default expressions on
the CREATE TABLE page.
Author: Amit Langote, Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20190326020853.GM2558@paquier.xyz
The transaction ID returned by GetNextXidAndEpoch() is in the future,
so we can't attempt to access its status or we might try to read a
CLOG page that doesn't exist. The > vs >= confusion probably stemmed
from the choice of a variable name containing the word "last" instead
of "next", so fix that too.
Back-patch to 10 where the function arrived.
Author: Thomas Munro
Discussion: https://postgr.es/m/CA%2BhUKG%2Buua_BV5cyfsioKVN2d61Lukg28ECsWTXKvh%3DBtN2DPA%40mail.gmail.com
When invoked for the first time in a session, current_schema() and
current_schemas() can finish by creating a temporary schema. Currently
those functions are parallel-safe, however if for a reason or another
they get launched across multiple parallel workers, they would fail when
attempting to create a temporary schema as temporary contexts are not
supported in this case.
The original issue has been spotted by buildfarm members crake and
lapwing, after commit c5660e0 has introduced the first regression tests
based on current_schema() in the tree. After that, 396676b has
introduced a workaround to avoid parallel plans but that was not
completely right either.
Catversion is bumped.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20190118024618.GF1883@paquier.xyz
Relations dropped in a single transaction are tracked in a list of
unowned relations. With large number of dropped relations this resulted
in poor performance at the end of a transaction, when the relations are
removed from the singly linked list one by one.
Commit b4166911 attempted to address this issue (particularly when it
happens during recovery) by removing the relations in a reverse order,
resulting in O(1) lookups in the list of unowned relations. This did
not work reliably, though, and it was possible to trigger the O(N^2)
behavior in various ways.
Instead of trying to remove the relations in a specific order with
respect to the linked list, which seems rather fragile, switch to a
regular doubly linked. That allows us to remove relations cheaply no
matter where in the list they are.
As b4166911 was a bugfix, backpatched to all supported versions, do the
same thing here.
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/flat/80c27103-99e4-1d0c-642c-d9f3b94aaa0a%402ndquadrant.com
Backpatch-through: 9.4
Previously the xid horizon was only computed during WAL replay. That
had two major problems:
1) It relied on knowing what the table pointed to looks like. That was
easy enough before the introducing of tableam (we knew it had to be
heap, although some trickery around logging the heap relfilenodes
was required). But to properly handle table AMs we need
per-database catalog access to look up the AM handler, which
recovery doesn't allow.
2) Not knowing the xid horizon also makes it hard to support logical
decoding on standbys. When on a catalog table, we need to be able
to conflict with slots that have an xid horizon that's too old. But
computing the horizon by visiting the heap only works once
consistency is reached, but we always need to be able to detect
conflicts.
There's also a secondary problem, in that the current method performs
redundant work on every standby. But that's counterbalanced by
potentially computing the value when not necessary (either because
there's no standby, or because there's no connected backends).
Solve 1) and 2) by moving computation of the xid horizon to the
primary and by involving tableam in the computation of the horizon.
To address the potentially increased overhead, increase the efficiency
of the xid horizon computation for heap by sorting the tids, and
eliminating redundant buffer accesses. When prefetching is available,
additionally perform prefetching of buffers. As this is more of a
maintenance task, rather than something routinely done in every read
only query, we add an arbitrary 10 to the effective concurrency -
thereby using IO concurrency, when not globally enabled. That's
possibly not the perfect formula, but seems good enough for now.
Bumps WAL format, as latestRemovedXid is now part of the records, and
the heap's relfilenode isn't anymore.
Author: Andres Freund, Amit Khandekar, Robert Haas
Reviewed-By: Robert Haas
Discussion:
https://postgr.es/m/20181212204154.nsxf3gzqv3gesl32@alap3.anarazel.dehttps://postgr.es/m/20181214014235.dal5ogljs3bmlq44@alap3.anarazel.dehttps://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
ALTER INDEX .. ATTACH PARTITION fails if the partitioned table where the
index is defined contains more dropped columns than its partition, with
this message:
ERROR: incorrect attribute map
The cause was that one caller of CompareIndexInfo was passing the number
of attributes of the partition rather than the parent, which confused
the length check. Repair.
This can cause pg_upgrade to fail when used on such a database. Leave
some more objects around after regression tests, so that the case is
detected by pg_upgrade test suite.
Remove some spurious empty lines noticed while looking for other cases
of the same problem.
Discussion: https://postgr.es/m/20190326213924.GA2322@alvherre.pgsql
Up to now, otherrel RelOptInfos were built at the same time as baserel
RelOptInfos, thanks to recursion in build_simple_rel(). However,
nothing in query_planner's preprocessing cares at all about otherrels,
only baserels, so we don't really need to build them until just before
we enter make_one_rel. This has two benefits:
* create_lateral_join_info did a lot of extra work to propagate
lateral-reference information from parents to the correct children.
But if we delay creation of the children till after that, it's
trivial (and much harder to break, too).
* Since we have all the restriction quals correctly assigned to
parent appendrels by this point, it'll be possible to do plan-time
pruning and never make child RelOptInfos at all for partitions that
can be pruned away. That's not done here, but will be later on.
Amit Langote, reviewed at various times by Dilip Kumar, Jesper Pedersen,
Yoshikazu Imai, and David Rowley
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
Commit caf626b2c missed that the relevant reloptions entry needs
to be moved from the intRelOpts[] array to realRelOpts[].
Somewhat surprisingly, it seems to work anyway, perhaps because
the desired default and limit values are all integers. We ought
to have either a simpler data structure or better cross-checking
here, but that's for another patch.
Nikolay Shaplov
Discussion: https://postgr.es/m/4861742.12LTaSB3sv@x200m
We've been creating duplicate RTEs for partitioned tables just
because we do so for regular inheritance parent tables. But unlike
regular-inheritance parents which are themselves regular tables
and thus need to be scanned, partitioned tables don't need the
extra RTE.
This makes the conditions for building a child RTE the same as those
for building an AppendRelInfo, allowing minor simplification in
expand_single_inheritance_child. Since the planner's actual processing
is driven off the AppendRelInfo list, nothing much changes beyond that,
we just have one fewer useless RTE entry.
Amit Langote, reviewed and hacked a bit by me
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
When used on a partition containing foreign keys coming from one of its
ancestors, \d would (rather unhelpfully) print the details about the
pg_constraint row in the partition. This becomes a bit frustrating when
the user tries things like dropping the FK in the partition; instead,
show the details for the foreign key on the table where it is defined.
Also, when a table is referenced by a foreign key on a partitioned
table, we would show multiple "Referenced by" lines, one for each
partition, which gets unwieldy pretty fast. Modify that so that it
shows only one line for the ancestor partitioned table where the FK is
defined.
Discussion: https://postgr.es/m/20181204143834.ym6euxxxi5aeqdpn@alvherre.pgsql
Reviewed-by: Tom Lane, Amit Langote, Peter Eisentraut
These instances were apparently trying to carry the const qualifier
from the arguments through the complex casts, but for that the const
qualifier was misplaced.
After 71bdc99d0d, "tableam: Add helper for indexes to check if a
corresponding table tuples exist." there's no in-core user left. As
there's unlikely to be an external user, and such an external user
could easily be adjusted to use table_index_fetch_tuple_check(),
remove heap_hot_search().
Per complaint from Peter Geoghegan
Author: Andres Freund
Discussion: https://postgr.es/m/CAH2-Wzn0Oq4ftJrTqRAsWy2WGjv0QrJcwoZ+yqWsF_Z5vjUBFw@mail.gmail.com
Since 7c079d7, partition bounds are able to use generalized expression
syntax when processed, treating "minvalue" and "maxvalue" as specific
cases as they get passed down for transformation as a column references.
The checks for infinite bounds in range expressions have been lax
though, causing crashes when trying to use column reference names with
more than one field. Here is an example causing a crash:
CREATE TABLE list_parted (a int) PARTITION BY LIST (a);
CREATE TABLE part_list_crash PARTITION OF list_parted
FOR VALUES IN (somename.somename);
Note that the creation of the second relation should fail as partition
bounds cannot have column references in their expressions, so when
finding an expression which does not match the expected infinite bounds,
then this commit lets the generic transformation machinery check after
it. The error message generated in this case references as well a
missing RTE, which is confusing. This problem will be treated
separately as it impacts as well default expressions for some time, and
for now only the cases where a crash can happen are fixed.
While on it, extend the set of regression tests in place for list
partition bounds and add an extra set for range partition bounds.
Reported-by: Alexander Lakhin
Author: Michael Paquier
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/15668-0377b1981aa1a393@postgresql.org
This primarily is to allow WHERE CURRENT OF to continue to work as it
currently does. It's not clear to me that these semantics make sense
for every AM, but it works for the in-core heap, and the out of core
zheap. We can refine it further at a later point if necessary.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
We were getting just DEFAULT_INEQ_SEL for comparisons such as
"ctid >= constant", but it's possible to do a lot better if we don't
mind some assumptions about the table's tuple density being reasonably
uniform. There are already assumptions much like that elsewhere in
the planner, so that hardly seems like much of an objection.
Extracted from a patch set that also proposes to introduce a special
executor node type for such queries. Not sure if that's going to make
it into v12, but improving the selectivity estimate is useful
independently of that.
Edmund Horner, reviewed by David Rowley
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
If there's only one child relation, the Append or MergeAppend isn't
doing anything useful, and can be elided. It does have a purpose
during planning though, which is to serve as a buffer between parent
and child Var numbering. Therefore we keep it all the way through
to setrefs.c, and get rid of it only after fixing references in the
plan level(s) above it. This works largely the same as setrefs.c's
ancient hack to get rid of no-op SubqueryScan nodes, and can even
share some code with that.
Note the change to make setrefs.c use apply_tlist_labeling rather than
ad-hoc code. This has the effect of propagating the child's resjunk
and ressortgroupref labels, which formerly weren't propagated when
removing a SubqueryScan. Doing that is demonstrably necessary for
the [Merge]Append cases, and seems harmless for SubqueryScan, if only
because trivial_subqueryscan is afraid to collapse cases where the
resjunk marking differs. (I suspect that restriction could now be
removed, though it's unclear that it'd make any new matches possible,
since the outer query can't have references to a child resjunk column.)
David Rowley, reviewed by Alvaro Herrera and Tomas Vondra
Discussion: https://postgr.es/m/CAKJS1f_7u8ATyJ1JGTMHFoKDvZdeF-iEBhs+sM_SXowOr9cArg@mail.gmail.com
Add additional heuristics to the algorithm for locating an optimal split
location. New logic identifies localized monotonically increasing
values in indexes with multiple columns. When this insertion pattern is
detected, page splits split just after the new item that provoked a page
split (or apply leaf fillfactor in the style of a rightmost page split).
This optimization is a variation of the long established leaf fillfactor
optimization used during rightmost page splits.
50/50 page splits are only appropriate with a pattern of truly random
insertions, where the average space utilization ends up at 65% - 70%.
Without this patch, affected cases have leaf pages that are no more than
about 50% full on average. Future insertions can never make use of the
free space left behind. With this patch, affected cases have leaf pages
that are about 90% full on average (assuming a fillfactor of 90).
Localized monotonically increasing insertion patterns are presumed to be
fairly common in real-world applications. There is a fair amount of
anecdotal evidence for this. Both pg_depend system catalog indexes
(pg_depend_depender_index and pg_depend_reference_index) are at least
20% smaller after the regression tests are run when the optimization is
available. Furthermore, many of the indexes created by a fair use
implementation of TPC-C for Postgres are consistently about 40% smaller
when the optimization is available.
Note that even pg_upgrade'd v3 indexes make use of this optimization.
Author: Peter Geoghegan
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/CAH2-WzkpKeZJrXvR_p7VSY1b-s85E3gHyTbZQzR0BkJ5LrWF_A@mail.gmail.com
Andres Freund
Michael Paquier
Peter Eisentraut
Robert Haas
Thomas Munro
Tomas Vondra
Tom Lane
Alvaro Herrera
Magnus Hagander
Peter Geoghegan
Heikki Linnakangas