Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
The call to XLogGetReplicationSlotMinimumLSN() might return a
greater LSN than the one given to the function. Subsequent segment
number calculations might then underflow, which could result in
unexpected behavior when removing or recyling WAL files. This was
introduced with max_slot_wal_keep_size in c655077639. To fix, skip
the block of code for replication slots if the LSN is greater.
Reported-by: Xu Xingwang
Author: Kyotaro Horiguchi
Reviewed-by: Junwang Zhao
Discussion: https://postgr.es/m/17903-4288d439dee856c6%40postgresql.org
Backpatch-through: 13
Commit c6f2f01611 purported to make
this work, but problems remained. In a plain-format backup, the
files from an in-place tablespace got included in the tar file for
the main tablespace, which is wrong but it's not clear that it
has any user-visible consequences. In a tar-format backup, the
TABLESPACE_MAP option is used, and so we never iterated over
pg_tblspc and thus never backed up the in-place tablespaces
anywhere at all.
To fix this, reverse the changes in that commit, so that when we scan
pg_tblspc during a backup, we create tablespaceinfo objects even for
in-place tablespaces. We set the field that would normally contain the
absolute pathname to the relative path pg_tblspc/${TSOID}, and that's
good enough to make basebackup.c happy without any further changes.
However, pg_basebackup needs a couple of adjustments to make it work.
First, it needs to understand that a relative path for a tablespace
means it's an in-place tablespace. Second, it needs to tolerate the
situation where restoring the main tablespace tries to create
pg_tblspc or a subdirectory and finds that it already exists, because
we restore user-defined tablespaces before the main tablespace.
Since in-place tablespaces are only intended for use in development
and testing, no back-patch.
Patch by me, reviewed by Thomas Munro and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmobwvbEp+fLq2PykMYzizcvuNv0a7gPMJtxOTMOuuRLMHg@mail.gmail.com
Unsurprisingly, this requires wal_level = logical to be set on the primary and
standby. The infrastructure added in 26669757b6 ensures that slots are
invalidated if the primary's wal_level is lowered.
Creating a slot on a standby waits for a xl_running_xact record to be
processed. If the primary is idle (and thus not emitting xl_running_xact
records), that can take a while. To make that faster, this commit also
introduces the pg_log_standby_snapshot() function. By executing it on the
primary, completion of slot creation on the standby can be accelerated.
Note that logical decoding on a standby does not itself enforce that required
catalog rows are not removed. The user has to use physical replication slots +
hot_standby_feedback or other measures to prevent that. If catalog rows
required for a slot are removed, the slot is invalidated.
See 6af1793954 for an overall design of logical decoding on a standby.
Bumps catversion, for the addition of the pg_log_standby_snapshot() function.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de> (in an older version)
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: FabrÌzio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Physical walsenders can't send data until it's been flushed; logical
walsenders can't decode and send data until it's been applied. On the
standby, the WAL is flushed first, which will only wake up physical
walsenders; and then applied, which will only wake up logical
walsenders.
Previously, all walsenders were awakened when the WAL was flushed. That
was fine for logical walsenders on the primary; but on the standby the
flushed WAL would have been not applied yet, so logical walsenders were
awakened too early.
Per idea from Jeff Davis and Amit Kapila.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1+zO5LUeisabX10c81LU-fWMKO4M9Wyg1cdkbW7Hqh6vQ@mail.gmail.com
During WAL replay on the standby, when a conflict with a logical slot is
identified, invalidate such slots. There are two sources of conflicts:
1) Using the information added in 6af1793954, logical slots are invalidated if
required rows are removed
2) wal_level on the primary server is reduced to below logical
Uses the infrastructure introduced in the prior commit. FIXME: add commit
reference.
Change InvalidatePossiblyObsoleteSlot() to use a recovery conflict to
interrupt use of a slot, if called in the startup process. The new recovery
conflict is added to pg_stat_database_conflicts, as confl_active_logicalslot.
See 6af1793954 for an overall design of logical decoding on a standby.
Bumps catversion for the addition of the pg_stat_database_conflicts column.
Bumps PGSTAT_FILE_FORMAT_ID for the same reason.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230407075009.igg7be27ha2htkbt@awork3.anarazel.de
Needed for logical decoding on a standby. Slots need to be invalidated because
of the horizon if rows required for logical decoding are removed. If the
primary's wal_level is lowered from 'logical', logical slots on the standby
need to be invalidated.
The new invalidation methods will be used in a subsequent commit.
Logical slots that have been invalidated can be identified via the new
pg_replication_slots.conflicting column.
See 6af1793954 for an overall design of logical decoding on a standby.
Bumps catversion for the addition of the new pg_replication_slots column.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230407075009.igg7be27ha2htkbt@awork3.anarazel.de
Provide a way to ask the kernel to use O_DIRECT (or local equivalent)
where available for data and WAL files, to avoid or minimize kernel
caching. This hurts performance currently and is not intended for end
users yet. Later proposed work would introduce our own I/O clustering,
read-ahead, etc to replace the facilities the kernel disables with this
option.
The only user-visible change, if the developer-only GUC is not used, is
that this commit also removes the obscure logic that would activate
O_DIRECT for the WAL when wal_sync_method=open_[data]sync and
wal_level=minimal (which also requires max_wal_senders=0). Those are
non-default and unlikely settings, and this behavior wasn't (correctly)
documented. The same effect can be achieved with io_direct=wal.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg%40mail.gmail.com
In order to have the option to use O_DIRECT/FILE_FLAG_NO_BUFFERING in a
later commit, we need the addresses of user space buffers to be well
aligned. The exact requirements vary by OS and file system (typically
sectors and/or memory pages). The address alignment size is set to
4096, which is enough for currently known systems: it matches modern
sectors and common memory page size. There is no standard governing
O_DIRECT's requirements so we might eventually have to reconsider this
with more information from the field or future systems.
Aligning I/O buffers on memory pages is also known to improve regular
buffered I/O performance.
Three classes of I/O buffers for regular data pages are adjusted:
(1) Heap buffers are now allocated with the new palloc_aligned() or
MemoryContextAllocAligned() functions introduced by commit 439f6175.
(2) Stack buffers now use a new struct PGIOAlignedBlock to respect
PG_IO_ALIGN_SIZE, if possible with this compiler. (3) The buffer
pool is also aligned in shared memory.
WAL buffers were already aligned on XLOG_BLCKSZ. It's possible for
XLOG_BLCKSZ to be configured smaller than PG_IO_ALIGNED_SIZE and thus
for O_DIRECT WAL writes to fail to be well aligned, but that's a
pre-existing condition and will be addressed by a later commit.
BufFiles are not yet addressed (there's no current plan to use O_DIRECT
for those, but they could potentially get some incidental speedup even
in plain buffered I/O operations through better alignment).
If we can't align stack objects suitably using the compiler extensions
we know about, we disable the use of O_DIRECT by setting PG_O_DIRECT to
0. This avoids the need to consider systems that have O_DIRECT but
can't align stack objects the way we want; such systems could in theory
be supported with more work but we don't currently know of any such
machines, so it's easier to pretend there is no O_DIRECT support
instead. That's an existing and tested class of system.
Add assertions that all buffers passed into smgrread(), smgrwrite() and
smgrextend() are correctly aligned, unless PG_O_DIRECT is 0 (= stack
alignment tricks may be unavailable) or the block size has been set too
small to allow arrays of buffers to be all aligned.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg@mail.gmail.com
In instr_time.h it is stated that:
* When summing multiple measurements, it's recommended to leave the
* running sum in instr_time form (ie, use INSTR_TIME_ADD or
* INSTR_TIME_ACCUM_DIFF) and convert to a result format only at the end.
The reason for that is that converting to microseconds is not cheap, and can
loose precision. Therefore this commit changes 'PendingWalStats' to use
'instr_time' instead of 'PgStat_Counter' while accumulating 'wal_write_time'
and 'wal_sync_time'.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/1feedb83-7aa9-cb4b-5086-598349d3f555@gmail.com
The following changes are made to pg_write_zeros(), the API able to
write series of zeros using vectored I/O:
- Add of an "offset" parameter, to write the size from this position
(the 'p' of "pwrite" seems to mean position, though POSIX does not
outline ythat directly), hence the name of the routine is incorrect if
it is not able to handle offsets.
- Avoid memset() of "zbuffer" on every call.
- Avoid initialization of the whole IOV array if not needed.
- Group the trailing write() call with the main write() call,
simplifying the function logic.
Author: Andres Freund
Reviewed-by: Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/20230215005525.mrrlmqrxzjzhaipl@awork3.anarazel.de
Open long-lived data and WAL file descriptors with O_CLOEXEC. This flag
was introduced by SUSv4 (POSIX.1-2008), and by now all of our target
Unix systems have it. Our open() implementation for Windows already had
that behavior, so provide a dummy O_CLOEXEC flag on that platform.
For now, callers of open() and the "thin" wrappers in fd.c that deal in
raw descriptors need to pass in O_CLOEXEC explicitly if desired. This
commit does that for WAL files, and automatically for everything
accessed via VFDs including SMgrRelation and BufFile. (With more
discussion we might decide to turn it on automatically for the thin
open()-wrappers too to avoid risk of missing places that need it, but
these are typically used for short-lived descriptors where we don't
expect to fork/exec, and it's remotely possible that extensions could be
using these APIs and passing descriptors to subprograms deliberately, so
that hasn't been done here.)
Do the same for sockets and the postmaster pipe with FD_CLOEXEC. (Later
commits might use modern interfaces to remove these extra fcntl() calls
and more where possible, but we'll need them as a fallback for a couple
of systems, so do it that way in this initial commit.)
With this change, subprograms executed for archiving, copying etc will
no longer have access to the server's descriptors, other than the ones
that we decide to pass down.
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGKb6FsAdQWcRL35KJsftv%2B9zXqQbzwkfRf1i0J2e57%2BhQ%40mail.gmail.com
This reverts commits 24c35ec and 57169ad. PreRestoreCommand() and
PostRestoreCommand() need to be put closer to the system() call calling
a restore_command, as they enable in_restore_command for the startup
process which would in turn trigger an immediate proc_exit() in the
SIGTERM handler. Perhaps we could get rid of this behavior entirely,
but 24c35ec has made the window where the flag is enabled much larger
than it was, and any Postgres-like actions (palloc, etc.) taken by code
paths while the flag is enabled could lead to more severe issues in the
shutdown processing.
Note that curculio has showed that there are much more problems in this
area, unrelated to this change, actually, hence the issues related to
that had better be addressed first. Keeping the code of HEAD in line
with the stable branches should make that a bit easier.
Per discussion with Andres Freund and Nathan Bossart.
Discussion: https://postgr.es/m/Y979NR3U5VnWrTwB@paquier.xyz
These are all not necessary from a correctness POV. However, in the near
future instr_time will be simplified to an int64, at which point gcc would
otherwise start to warn about the changed places.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20230116023639.rn36vf6ajqmfciua@awork3.anarazel.de
The code specific to the execution of archive_cleanup_command,
recovery_end_command and restore_command is moved to a new file named
shell_restore.c. The code is split into three functions:
- shell_restore(), that attempts the execution of a shell-based
restore_command.
- shell_archive_cleanup(), for archive_cleanup_command.
- shell_recovery_end(), for recovery_end_command.
This introduces no functional changes, with failure patterns and logs
generated in consequence being the same as before (one case actually
generates one less DEBUG2 message "could not restore" when a restore
command succeeds but the follow-up stat() to check the size fails, but
that only matters with a elevel high enough).
This is preparatory work for allowing recovery modules, a facility
similar to archive modules, with callbacks shaped similarly to the
functions introduced here.
Author: Nathan Bossart
Reviewed-by: Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/20221227192449.GA3672473@nathanxps13
Because we added StaticAssertStmt() first before StaticAssertDecl(),
some uses as well as the instructions in c.h are now a bit backwards
from the "native" way static assertions are meant to be used in C.
This updates the guidance and moves some static assertions to better
places.
Specifically, since the addition of StaticAssertDecl(), we can put
static assertions at the file level. This moves a number of static
assertions out of function bodies, where they might have been stuck
out of necessity, to perhaps better places at the file level or in
header files.
Also, when the static assertion appears in a position where a
declaration is allowed, then using StaticAssertDecl() is more native
than StaticAssertStmt().
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/941a04e7-dd6f-c0e4-8cdf-a33b3338cbda%40enterprisedb.com
This routine is designed to write zeros to a file using vectored I/O,
for a size given by its caller, being useful when it comes to
initializing a file with a final size already known.
XLogFileInitInternal() in xlog.c is changed to use this new routine when
initializing WAL segments with zeros (wal_init_zero enabled). Note that
the aligned buffers used for the vectored I/O writes have a size of
XLOG_BLCKSZ, and not BLCKSZ anymore, as pg_pwrite_zeros() relies on
PGAlignedBlock while xlog.c originally used PGAlignedXLogBlock.
This routine will be used in a follow-up patch to do the pre-padding of
WAL segments for pg_receivewal and pg_basebackup when these are not
compressed.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Andres Freund, Thomas Munro, Michael
Paquier
Discussion: https://www.postgresql.org/message-id/CALj2ACUq7nAb7%3DbJNbK3yYmp-SZhJcXFR_pLk8un6XgDzDF3OA%40mail.gmail.com
This is similar to 7d25958, and this commit takes care of all the
remaining inconsistencies between the initial value used in the C
variable associated to a GUC and its default value stored in the GUC
tables (as of pg_settings.boot_val).
Some of the initial values of the GUCs updated rely on a compile-time
default. These are refactored so as the GUC table and its C declaration
use the same values. This makes everything consistent with other
places, backend_flush_after, bgwriter_flush_after, port,
checkpoint_flush_after doing so already, for example.
Extracted from a larger patch by Peter Smith. The spots updated in the
modules are from me.
Author: Peter Smith, Michael Paquier
Reviewed-by: Nathan Bossart, Tom Lane, Justin Pryzby
Discussion: https://postgr.es/m/CAHut+PtHE0XSfjjRQ6D4v7+dqzCw=d+1a64ujra4EX8aoc_Z+w@mail.gmail.com
Commit df3737a651 added an incorrect assertion about the preconditions
for invoking the backup cleanup callback: it misfires at session end in
case a backup completes successfully. Fix it, using coding from Michaël
Paquier. Also add some tests for the various cases.
Reported by Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20221021.161038.1277961198945653224.horikyota.ntt@gmail.com
After commit 39969e2a1e, ->forcePageWrites is no longer very
interesting: we can just test whether runningBackups is different from 0.
This simplifies some code, so do away with it.
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/39969e2a1e4d7f5a37f3ef37d53bbfe171e7d77a
We had two copies of almost identical logic to revert shared memory
state when a running backup aborts; we can remove
pg_backup_start_callback if we adapt do_pg_abort_backup so that it can
be used for this purpose too.
However, in order for this to work, we have to repurpose the flag passed
to do_pg_abort_backup. It used to indicate whether to throw a warning
(and the only caller always passed true). It now indicates whether the
callback is being called at start time (in which case the session backup
state is known not to have been set to RUNNING yet, so action is always
taken) or shmem time (in which case action is only taken if the session
backup state is RUNNING). Thus the meaning of the flag is no longer
superfluous, but it's actually quite critical to get right. I (Álvaro)
chose to change the polarity and the code flow re. the flag from what
Bharath submitted, for coding clarity.
Co-authored-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/20221013111330.564fk5tkwe3ha77l%40alvherre.pgsql
This cleans up a couple of areas:
- Remove XLogSegNo calculation for the last WAL segment in backup in
xlog.c (7d70809 has moved this logic entirely to xlogbackup.c when
building the contents of the backup history file).
- Remove check on log_min_duration in analyze.c, as it is already true
where this code path is reached.
- Simplify call to find_option() in guc.c.
Author: Ranier Vilela
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAEudQArCDQQiPiFR16=yu9k5s2tp4tgEe1U1ZbkW4ofx81AWWQ@mail.gmail.com
Commits cf112c12 and a0dc8271 were a little too hasty in getting rid of
the pg_ prefixes where we use pread(), pwrite() and vectored variants.
We dropped support for ancient Unixes where we needed to use lseek() to
implement replacements for those, but it turns out that Windows also
changes the current position even when you pass in an offset to
ReadFile() and WriteFile() if the file handle is synchronous, despite
its documentation saying otherwise.
Switching to asynchronous file handles would fix that, but have other
complications. For now let's just put back the pg_ prefix and add some
comments to highlight the non-standard side-effect, which we can now
describe as Windows-only.
Reported-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/20220923202439.GA1156054%40nathanxps13
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
This was used as the returned result type of the generated contents for
the backup_label and backup history files. This is replaced by a simple
string, reducing the cleanup burden of all the callers of
build_backup_content().
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/YzERvNPaZivHEKZJ@paquier.xyz
This change simplifies some of the logic related to the generation and
creation of the backup_label and backup history files, which has become
unnecessarily complicated since the removal of the exclusive backup mode
in commit 39969e2. The code was previously generating the contents of
these files as a string (start phase for the backup_label and stop phase
for the backup history file), one problem being that the contents of the
backup_label string were scanned to grab some of its internal contents
at the stop phase.
This commit changes the logic so as we store the data required to build
these files in an intermediate structure named BackupState. The
backup_label file and backup history file strings are generated when
they are ready to be sent back to the client. Both files are now
generated with the same code path. While on it, this commit renames
some variables for clarity.
Two new files named xlogbackup.{c,h} are introduced in this commit, to
remove from xlog.c some of the logic around base backups. Note that
more could be moved to this new set of files.
Author: Bharath Rupireddy, Michael Paquier
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CALj2ACXWwTDgJqCjdaPyfR7djwm6SrybGcrZyrvojzcsmt4FFw@mail.gmail.com
If the ps display is not cleared at this point, the process could
continue displaying "recovering NNN" even if handling end-of-recovery
steps. df9274a has tackled that by providing some information with the
end-of-recovery checkpoint but 7ff23c6 has nullified the effect of the
first commit.
Per a suggestion from Justin, just clear the ps display when we are done
with recovery, so as no incorrect information is displayed. This may
get extended in the future, but for now restore the pre-7ff23c6
behavior.
Author: Justin Prysby
Discussion: https://postgr.es/m/20220913223954.GU31833@telsasoft.com
Backpatch-through: 15
clang 15+ will issue a set-but-not-used warning when the only
use of a variable is in autoincrements (e.g., "foo++;").
That's perfectly sensible, but it detects a few more cases that
we'd not noticed before. Silence the warnings with our usual
methods, such as PG_USED_FOR_ASSERTS_ONLY, or in one case by
actually removing a useless variable.
One thing that we can't nicely get rid of is that with %pure-parser,
Bison emits "yynerrs" as a local variable that falls foul of this
warning. To silence those, I inserted "(void) yynerrs;" in the
top-level productions of affected grammars.
Per recently-established project policy, this is a candidate
for back-patching into out-of-support branches: it suppresses
annoying compiler warnings but changes no behavior. Hence,
back-patch to 9.5, which is as far as these patches go without
issues. (A preliminary check shows that the prior branches
need some other set-but-not-used cleanups too, so I'll leave
them for another day.)
Discussion: https://postgr.es/m/514615.1663615243@sss.pgh.pa.us
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in storage, catalog,
access method, executor, and logical replication code, as well as in
miscellaneous utility/library code.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will do the
same for other parts of the codebase.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
guc.c has grown to be one of our largest .c files, making it
a bottleneck for compilation. It's also acquired a bunch of
knowledge that'd be better kept elsewhere, because of our not
very good habit of putting variable-specific check hooks here.
Hence, split it up along these lines:
* guc.c itself retains just the core GUC housekeeping mechanisms.
* New file guc_funcs.c contains the SET/SHOW interfaces and some
SQL-accessible functions for GUC manipulation.
* New file guc_tables.c contains the data arrays that define the
built-in GUC variables, along with some already-exported constant
tables.
* GUC check/assign/show hook functions are moved to the variable's
home module, whenever that's clearly identifiable. A few hard-
to-classify hooks ended up in commands/variable.c, which was
already a home for miscellaneous GUC hook functions.
To avoid cluttering a lot more header files with #include "guc.h",
I also invented a new header file utils/guc_hooks.h and put all
the GUC hook functions' declarations there, regardless of their
originating module. That allowed removal of #include "guc.h"
from some existing headers. The fallout from that (hopefully
all caught here) demonstrates clearly why such inclusions are
best minimized: there are a lot of files that, for example,
were getting array.h at two or more levels of remove, despite
not having any connection at all to GUCs in themselves.
There is some very minor code beautification here, such as
renaming a couple of inconsistently-named hook functions
and improving some comments. But mostly this just moves
code from point A to point B and deals with the ensuing
needs for #include adjustments and exporting a few functions
that previously weren't exported.
Patch by me, per a suggestion from Andres Freund; thanks also
to Michael Paquier for the idea to invent guc_funcs.c.
Discussion: https://postgr.es/m/587607.1662836699@sss.pgh.pa.us
Several backend-side loops scanning one or more directories with
ReadDir() (WAL segment recycle/removal in xlog.c, backend-side directory
copy, temporary file removal, configuration file parsing, some logical
decoding logic and some pgtz stuff) already know the type of the entry
being scanned thanks to the dirent structure associated to the entry, on
platforms where we know about DT_REG, DT_DIR and DT_LNK to make the
difference between a regular file, a directory and a symbolic link.
Relying on the direct structure of an entry saves a few system calls to
stat() and lstat() in the loops updated here, shaving some code while on
it. The logic of the code remains the same, calling stat() or lstat()
depending on if it is necessary to look through symlinks.
Authors: Nathan Bossart, Bharath Rupireddy
Reviewed-by: Andres Freund, Thomas Munro, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACV8n-J-f=yiLUOx2=HrQGPSOZM3nWzyQQvLPcccPXxEdg@mail.gmail.com
When a PostgreSQL instance performing archive recovery but not using
standby mode is promoted, and the last WAL segment that it attempted
to read ended in a partial record, the previous code would create
invalid WAL on the new timeline. The WAL from the previously timeline
would be copied to the new timeline up until the end of the last valid
record, but instead of beginning to write WAL at immediately
afterwards, the promoted server would write an overwrite contrecord at
the beginning of the next segment. The end of the previous segment
would be left as all-zeroes, resulting in failures if anything tried
to read WAL from that file.
The root of the issue is that ReadRecord() decides whether to set
abortedRecPtr and missingContrecPtr based on the value of StandbyMode,
but ReadRecord() switches to a new timeline based on the value of
ArchiveRecoveryRequested. We shouldn't try to write an overwrite
contrecord if we're switching to a new timeline, so change the test in
ReadRecod() to check ArchiveRecoveryRequested instead.
Code fix by Dilip Kumar. Comments by me incorporating suggested
language from Álvaro Herrera. Further review from Kyotaro Horiguchi
and Sami Imseih.
Discussion: http://postgr.es/m/CAFiTN-t7umki=PK8dT1tcPV=mOUe2vNhHML6b3T7W7qqvvajjg@mail.gmail.com
Discussion: http://postgr.es/m/FB0DEA0B-E14E-43A0-811F-C1AE93D00FF3%40amazon.com
In a similar effort to f01592f91, here we're targetting fixing the
warnings where we've deemed the shadowing variable to serve a close enough
purpose to the shadowed variable just to reuse the shadowed version and
not declare the shadowing variable at all.
By my count, this takes the warning count from 106 down to 71.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220825020839.GT2342@telsasoft.com
pread() and pwrite() are in SUSv2, and all targeted Unix systems have
them.
Previously, we defined pg_pread and pg_pwrite to emulate these function
with lseek() on old Unixen. The names with a pg_ prefix were a reminder
of a portability hazard: they might change the current file position.
That hazard is gone, so we can drop the prefixes.
Since the remaining replacement code is Windows-only, move it into
src/port/win32p{read,write}.c, and move the declarations into
src/include/port/win32_port.h.
No need for vestigial HAVE_PREAD, HAVE_PWRITE macros as they were only
used for declarations in port.h which have now moved into win32_port.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
symlink() and readlink() are in SUSv2 and all targeted Unix systems have
them. We have partial emulation on Windows. Code that raised runtime
errors on systems without it has been dead for years, so we can remove
that and also references to such systems in the documentation.
Define HAVE_READLINK and HAVE_SYMLINK macros on Unix. Our Windows
replacement functions based on junction points can't be used for
relative paths or for non-directories, so the macros can be used to
check for full symlink support. The places that deal with tablespaces
can just use symlink functions without checking the macros. (If they
did check the macros, they'd need to provide an #else branch with a
runtime or compile time error, and it'd be dead code.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
Commit c6f2f016 added an explicit check for a Windows "junction point".
That turned out to be needed only because get_dirent_type() was busted
on Windows. It's been fixed by commit 9d3444dc, so remove it.
Add a TAP-test to demonstrate that in-place tablespaces are copied by
pg_basebackup. This exercises the codepath that would fail before
c6f2f016 on Windows, and shows that it still doesn't fail now that we're
using get_dirent_type() on both Windows and Unix.
Back-patch to 15, where in-place tablespaces arrived and caused this
problem (ie directories where previously only symlinks were expected).
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGLzLK4PUPx0_AwXEWXOYAejU%3D7XpxnYE55Y%2Be7hB2N3FA%40mail.gmail.com
O_FSYNC was a pre-POSIX way of spelling O_SYNC, supported since commit
9d645fd84c for non-conforming operating systems of the time. It's not
needed on any modern system. We can just use standard O_SYNC directly
if it exists (= all targeted systems except Windows), and get rid of our
OPEN_SYNC_FLAG macro.
Similarly for standard O_DSYNC, we can just use that directly if it
exists (= all targeted systems except DragonFlyBSD), and get rid of our
OPEN_DATASYNC_FLAG macro.
We still avoid choosing open_datasync as a default value for
wal_sync_method if O_DSYNC has the same value as O_SYNC (= only
OpenBSD), so there is no change in default behavior.
Discussion: https://postgr.es/m/CA%2BhUKGJE7y92NY7FG2ftUbZUaqohBU65_Ys_7xF5mUHo4wirTQ%40mail.gmail.com
When a non-exclusive backup is canceled, do_pg_abort_backup() is called
and resets some variables set by pg_backup_start (pg_start_backup in v14
or before). But previously it forgot to reset the session state indicating
whether a non-exclusive backup is in progress or not in this session.
This issue could cause an assertion failure when the session running
BASE_BACKUP is terminated after it executed pg_backup_start and
pg_backup_stop (pg_stop_backup in v14 or before). Also it could cause
a segmentation fault when pg_backup_stop is called after BASE_BACKUP
in the same session is canceled.
This commit fixes the issue by making do_pg_abort_backup reset
that session state.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Masahiko Sawada, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/3374718f-9fbf-a950-6d66-d973e027f44c@oss.nttdata.com
It is useful for debugging purposes to report the checkpoint LSN and
REDO LSN in log_checkpoints message. It can give more context while
analyzing checkpoint-related issues. pg_controldata reports the last
checkpoint LSN and REDO LSN, but having this information alongside
the log message helps analyze issues that happened previously,
connect the dots and identify the root cause.
Author: Bharath Rupireddy, Kyotaro Horiguchi
Reviewed-by: Michael Paquier, Julien Rouhaud, Nathan Bossart, Fujii Masao, Greg Stark
Discussion: https://postgr.es/m/CALj2ACWt6kqriAHrO+AJj+OmP=suwbktHT5JoYAn-nqZe2gd2g@mail.gmail.com
durable_rename_excl() attempts to avoid overwriting any existing files
by using link() and unlink(), and it falls back to rename() on some
platforms (aka WIN32), which offers no such overwrite protection. Most
callers use durable_rename_excl() just in case there is an existing
file, but in practice there shouldn't be one (see below for more
details).
Furthermore, failures during durable_rename_excl() can result in
multiple hard links to the same file. As per Nathan's tests, it is
possible to end up with two links to the same file in pg_wal after a
crash just before unlink() during WAL recycling. Specifically, the test
produced links to the same file for the current WAL file and the next
one because the half-recycled WAL file was re-recycled upon restarting,
leading to WAL corruption.
This change replaces all the calls of durable_rename_excl() to
durable_rename(). This removes the protection against accidentally
overwriting an existing file, but some platforms are already living
without it and ordinarily there shouldn't be one. The function itself
is left around in case any extensions are using it. It will be removed
on HEAD via a follow-up commit.
Here is a summary of the existing callers of durable_rename_excl() (see
second discussion link at the bottom), replaced by this commit. First,
basic_archive used it to avoid overwriting an archive concurrently
created by another server, but as mentioned above, it will still
overwrite files on some platforms. Second, xlog.c uses it to recycle
past WAL segments, where an overwrite should not happen (origin of the
change at f0e37a8) because there are protections about the WAL segment
to select when recycling an entry. The third and last area is related
to the write of timeline history files. writeTimeLineHistory() will
write a new timeline history file at the end of recovery on promotion,
so there should be no such files for the same timeline.
What remains is writeTimeLineHistoryFile(), that can be used in parallel
by a WAL receiver and the startup process, and some digging of the
buildfarm shows that EEXIST from a WAL receiver can happen with an error
of "could not link file \"pg_wal/xlogtemp.NN\" to \"pg_wal/MM.history\",
which would cause an automatic restart of the WAL receiver as it is
promoted to FATAL, hence this should improve the stability of the WAL
receiver as rename() would overwrite an existing TLI history file
already fetched by the startup process at recovery.
This is a bug fix, but knowing the unlikeliness of the problem involving
one or more crashes at an exceptionally bad moment, no backpatch is
done. Also, I want to be careful with such changes (aaa3aed did the
opposite of this change by removing HAVE_WORKING_LINK so as Windows
would do a link() rather than a rename() but this was not
concurrent-safe). A backpatch could be revisited in the future. This
is the second time this change is attempted, ccfbd92 being the first
one, but this time no assertions are added for the case of a TLI history
file written concurrently by the WAL receiver or the startup process
because we can expect one to exist (some of the TAP tests are able to
trigger with a proper timing).
Author: Nathan Bossart
Reviewed-by: Robert Haas, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20220407182954.GA1231544@nathanxps13
Discussion: https://postgr.es/m/Ym6GZbqQdlalSKSG@paquier.xyz
The original advice for hard-wired SetConfigOption calls was to use
PGC_S_OVERRIDE, particularly for PGC_INTERNAL GUCs. However,
that's really overkill for PGC_INTERNAL GUCs, since there is no
possibility that we need to override a user-provided setting.
Instead use PGC_S_DYNAMIC_DEFAULT in most places, so that the
value will appear with source = 'default' in pg_settings and thereby
not be shown by psql's new \dconfig command. The one exception is
that when changing in_hot_standby in a hot-standby session, we still
use PGC_S_OVERRIDE, because people felt that seeing that in \dconfig
would be a good thing.
Similarly use PGC_S_DYNAMIC_DEFAULT for the auto-tune value of
wal_buffers (if possible, that is if wal_buffers wasn't explicitly
set to -1), and for the typical 2MB value of max_stack_depth.
In combination these changes remove four not-very-interesting
entries from the typical output of \dconfig, all of which people
fingered as "why is that showing up?" in the discussion thread.
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
Tom Lane
Nathan Bossart
David Rowley
Robert Haas
Andres Freund
Thomas Munro
Michael Paquier
Bruce Momjian
Peter Eisentraut
Alvaro Herrera
Peter Geoghegan
Fujii Masao