(Actually, it works as a plain statement too, but I didn't document that
because it seems a bit useless.) Unify VariableResetStmt with
VariableSetStmt, and clean up some ancient cruft in the representation of
same.
sets for outer joins, in the light of bug #3588 and additional thought and
experimentation. The original methodology was fatally flawed for nests of
more than two outer joins: it got the relationships between adjacent joins
right, but didn't always come to the right conclusions about whether a join
could be interchanged with one two or more levels below it. This was largely
caused by a mistaken idea that we should use the min_lefthand + min_righthand
sets of a sub-join as the minimum left or right input set of an upper join
when we conclude that the sub-join can't commute with the upper one. If
there's a still-lower join that the sub-join *can* commute with, this method
led us to think that that one could commute with the topmost join; which it
can't. Another problem (not directly connected to bug #3588) was that
make_outerjoininfo's processing-order-dependent method for enforcing outer
join identity #3 didn't work right: if we decided that join A could safely
commute with lower join B, we dropped all information about sub-joins under B
that join A could perhaps not safely commute with, because we removed B's
entire min_righthand from A's.
To fix, make an explicit computation of all inner join combinations that occur
below an outer join, and add to that the full syntactic relsets of any lower
outer joins that we determine it can't commute with. This method gives much
more direct enforcement of the outer join rearrangement identities, and it
turns out not to cost a lot of additional bookkeeping.
Thanks to Richard Harris for the bug report and test case.
with a plpgsql-defined cursor. The underlying mechanism for this is that the
main SQL engine will now take "WHERE CURRENT OF $n" where $n is a refcursor
parameter. Not sure if we should document that fact or consider it an
implementation detail. Per discussion with Pavel Stehule.
Along the way, allow FOR UPDATE in non-WITH-HOLD cursors; there may once
have been a reason to disallow that, but it seems to work now, and it's
really rather necessary if you want to select a row via a cursor and then
update it in a concurrent-safe fashion.
Original patch by Arul Shaji, rather heavily editorialized by Tom Lane.
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
in cases where a sub-SELECT inserts a WHERE clause between two outer joins,
that clause may prevent us from re-ordering the two outer joins. The code
was considering only the joins' own ON-conditions in determining reordering
safety, which is not good enough. Add a "delay_upper_joins" flag to
OuterJoinInfo to flag that we have detected such a clause and higher-level
outer joins shouldn't be permitted to commute with this one. (This might
seem overly coarse, but given the current rules for OJ reordering, it's
sufficient AFAICT.)
The failure case is actually pretty narrow: it needs a WHERE clause within
the RHS of a left join that checks the RHS of a lower left join, but is not
strict for that RHS (else we'd have simplified the lower join to a plain
join). Even then no failure will be manifest unless the planner chooses to
rearrange the join order.
Per bug report from Adam Terrey.
types of unspecified parameters when submitted via extended query protocol.
This worked in 8.2 but I had broken it during plancache changes. DECLARE
CURSOR is now treated almost exactly like a plain SELECT through parse
analysis, rewrite, and planning; only just before sending to the executor
do we divert it away to ProcessUtility. This requires a special-case check
in a number of places, but practically all of them were already special-casing
SELECT INTO, so it's not too ugly. (Maybe it would be a good idea to merge
the two by treating IntoClause as a form of utility statement? Not going to
worry about that now, though.) That approach doesn't work for EXPLAIN,
however, so for that I punted and used a klugy solution of running parse
analysis an extra time if under extended query protocol.
RESET SESSION, RESET PLANS, and RESET TEMP are now DISCARD ALL,
DISCARD PLANS, and DISCARD TEMP, respectively. This is to avoid
confusion with the pre-existing RESET variants: the DISCARD
commands are not actually similar to RESET. Patch from Marko
Kreen, with some minor editorialization.
seen by code inspecting the expression. The best way to do this seems
to be to drop the original representation as a function invocation, and
instead make a special expression node type that represents applying
the element-type coercion function to each array element. In this way
the element function is exposed and will be checked for volatility.
Per report from Guillaume Smet.
available information about the typmod of an expression; namely, Const,
ArrayRef, ArrayExpr, and EXPR and ARRAY SubLinks. In the ArrayExpr and
SubLink cases it wasn't really the data structure's fault, but exprTypmod()
being lazy. This seems like a good idea in view of the expected increase in
typmod usage from Teodor's work to allow user-defined types to have typmods.
In particular this responds to the concerns we had about eliminating the
special-purpose hack that exprTypmod() used to have for BPCHAR Consts.
We can now tell whether or not such a Const has been cast to a specific
length, and report or display properly if so.
initdb forced due to changes in stored rules.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
useless substructure for its RangeTblEntry nodes. (I chose to keep using the
same struct node type and just zero out the link fields for unneeded info,
rather than making a separate ExecRangeTblEntry type --- it seemed too
fragile to have two different rangetable representations.)
Along the way, put subplans into a list in the toplevel PlannedStmt node,
and have SubPlan nodes refer to them by list index instead of direct pointers.
Vadim wanted to do that years ago, but I never understood what he was on about
until now. It makes things a *whole* lot more robust, because we can stop
worrying about duplicate processing of subplans during expression tree
traversals. That's been a constant source of bugs, and it's finally gone.
There are some consequent simplifications yet to be made, like not using
a separate EState for subplans in the executor, but I'll tackle that later.
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
observe the xmloption.
Reorganize the representation of the XML option in the parse tree and the
API to make it easier to manage and understand.
Add regression tests for parsing back XML expressions.
FAMILY; and add FAMILY option to CREATE OPERATOR CLASS to allow adding a
class to a pre-existing family. Per previous discussion. Man, what a
tedious lot of cutting and pasting ...
representation of equivalence classes of variables. This is an extensive
rewrite, but it brings a number of benefits:
* planner no longer fails in the presence of "incomplete" operator families
that don't offer operators for every possible combination of datatypes.
* avoid generating and then discarding redundant equality clauses.
* remove bogus assumption that derived equalities always use operators
named "=".
* mergejoins can work with a variety of sort orders (e.g., descending) now,
instead of tying each mergejoinable operator to exactly one sort order.
* better recognition of redundant sort columns.
* can make use of equalities appearing underneath an outer join.
which comparison operators to use for plan nodes involving tuple comparison
(Agg, Group, Unique, SetOp). Formerly the executor looked up the default
equality operator for the datatype, which was really pretty shaky, since it's
possible that the data being fed to the node is sorted according to some
nondefault operator class that could have an incompatible idea of equality.
The planner knows what it has sorted by and therefore can provide the right
equality operator to use. Also, this change moves a couple of catalog lookups
out of the executor and into the planner, which should help startup time for
pre-planned queries by some small amount. Modify the planner to remove some
other cavalier assumptions about always being able to use the default
operators. Also add "nulls first/last" info to the Plan node for a mergejoin
--- neither the executor nor the planner can cope yet, but at least the API is
in place.
per-column options for btree indexes. The planner's support for this is still
pretty rudimentary; it does not yet know how to plan mergejoins with
nondefault ordering options. The documentation is pretty rudimentary, too.
I'll work on improving that stuff later.
Note incompatible change from prior behavior: ORDER BY ... USING will now be
rejected if the operator is not a less-than or greater-than member of some
btree opclass. This prevents less-than-sane behavior if an operator that
doesn't actually define a proper sort ordering is selected.
the XmlExpr code in various lists, use a representation that has some hope
of reverse-listing correctly (though it's still a de-escaping function
shy of correctness), generally try to make it look more like Postgres
coding conventions.
cases. Operator classes now exist within "operator families". While most
families are equivalent to a single class, related classes can be grouped
into one family to represent the fact that they are semantically compatible.
Cross-type operators are now naturally adjunct parts of a family, without
having to wedge them into a particular opclass as we had done originally.
This commit restructures the catalogs and cleans up enough of the fallout so
that everything still works at least as well as before, but most of the work
needed to actually improve the planner's behavior will come later. Also,
there are not yet CREATE/DROP/ALTER OPERATOR FAMILY commands; the only way
to create a new family right now is to allow CREATE OPERATOR CLASS to make
one by default. I owe some more documentation work, too. But that can all
be done in smaller pieces once this infrastructure is in place.
representing externally-supplied values, since the APIs that carry such
values only specify type not typmod. However, for PARAM_SUBLINK Params
it is handy to carry the typmod of the sublink's output column. This
is a much cleaner solution for the recently reported 'could not find
pathkey item to sort' and 'failed to find unique expression in subplan
tlist' bugs than my original 8.2-compatible patch. Besides, someday we
might want to support typmods for external parameters ...
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
by abandoning the idea that it should say SERIAL in the dump. Instead,
dump serial sequences and column defaults just like regular ones.
Add a new backend command ALTER SEQUENCE OWNED BY to let pg_dump recreate
the sequence-to-column dependency that was formerly created "behind the
scenes" by SERIAL. This restores SERIAL to being truly "just a macro"
consisting of component operations that can be stated explicitly in SQL.
Furthermore, the new command allows sequence ownership to be reassigned,
so that old mistakes can be cleaned up.
Also, downgrade the OWNED-BY dependency from INTERNAL to AUTO, since there
is no longer any very compelling argument why the sequence couldn't be
dropped while keeping the column. (This forces initdb, to be sure the
right kinds of dependencies are in there.)
Along the way, add checks to prevent ALTER OWNER or SET SCHEMA on an
owned sequence; you can now only do this indirectly by changing the
owning table's owner or schema. This is an oversight in previous
releases, but probably not worth back-patching.
plpgsql support to come later. Along the way, convert execMain's
SELECT INTO support into a DestReceiver, in order to eliminate some ugly
special cases.
Jonah Harris and Tom Lane
same data type and same typmod, we show that typmod as the output
typmod, rather than generic -1. This responds to several complaints
over the past few years about UNIONs unexpectedly dropping length or
precision info.
(e.g. "INSERT ... VALUES (...), (...), ...") and elsewhere as allowed
by the spec. (e.g. similar to a FROM clause subselect). initdb required.
Joe Conway and Tom Lane.
the opportunity to treat COUNT(*) as a zero-argument aggregate instead
of the old hack that equated it to COUNT(1); this is materially cleaner
(no more weird ANYOID cases) and ought to be at least a tiny bit faster.
Original patch by Sergey Koposov; review, documentation, simple regression
tests, pg_dump and psql support by moi.
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
the read lock we hold on the table's parent relation until commit.
Update equalfuncs.c for the new field in AlterTableCmd. Various
improvements to comments, variable names, and error reporting.
There is room for further improvement here, but this is at least
a step in the right direction.
support both FOR UPDATE and FOR SHARE in one command, as well as both
NOWAIT and normal WAIT behavior. The more general code is actually
simpler and cleaner.
not named ones, and replace linear searches of the list with array indexing.
The named-parameter support has been dead code for many years anyway,
and recent profiling suggests that the searching was costing a noticeable
amount of performance for complex queries.
CREATE AGGREGATE aggname (input_type) (parameter_list)
along with the old syntax where the input type was named in the parameter
list. This fits more naturally with the way that the aggregate is identified
in DROP AGGREGATE and other utility commands; furthermore it has a natural
extension to handle multiple-input aggregates, where the basetype-parameter
method would get ugly. In fact, this commit fixes the grammar and all the
utility commands to support multiple-input aggregates; but DefineAggregate
rejects it because the executor isn't fixed yet.
I didn't do anything about treating agg(*) as a zero-input aggregate instead
of artificially making it a one-input aggregate, but that should be considered
in combination with supporting multi-input aggregates.
The original coding stored the raw parser output (ColumnDef and TypeName
nodes) which was ugly, bulky, and wrong because it failed to create any
dependency on the referenced datatype --- and in fact would not track type
renamings and suchlike. Instead store a list of column type OIDs in the
RTE.
Also fix up general failure of recordDependencyOnExpr to do anything sane
about recording dependencies on datatypes. While there are many cases where
there will be an indirect dependency (eg if an operator returns a datatype,
the dependency on the operator is enough), we do have to record the datatype
as a separate dependency in examples like CoerceToDomain.
initdb forced because of change of stored rules.
during parse analysis, not only errors detected in the flex/bison stages.
This is per my earlier proposal. This commit includes all the basic
infrastructure, but locations are only tracked and reported for errors
involving column references, function calls, and operators. More could
be done later but this seems like a good set to start with. I've also
moved the ReportSyntaxErrorPosition logic out of psql and into libpq,
which should make it available to more people --- even within psql this
is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
inheritance trees on-the-fly, which pretty well constrained us to considering
only one way of planning inheritance, expand inheritance sets during the
planner prep phase, and build a side data structure that can be consulted
later to find which RTEs are members of which inheritance sets. As proof of
concept, use the data structure to plan joins against inheritance sets more
efficiently: we can now use indexes on the set members in inner-indexscan
joins. (The generated plans could be improved further, but it'll take some
executor changes.) This data structure will also support handling UNION ALL
subqueries in the same way as inheritance sets, but that aspect of it isn't
finished yet.
(previously we only did = and <> correctly). Also, allow row comparisons
with any operators that are in btree opclasses, not only those with these
specific names. This gets rid of a whole lot of indefensible assumptions
about the behavior of particular operators based on their names ... though
it's still true that IN and NOT IN expand to "= ANY". The patch adds a
RowCompareExpr expression node type, and makes some changes in the
representation of ANY/ALL/ROWCOMPARE SubLinks so that they can share code
with RowCompareExpr.
I have not yet done anything about making RowCompareExpr an indexable
operator, but will look at that soon.
initdb forced due to changes in stored rules.
Per my recent proposal. I ended up basing the implementation on the
existing mechanism for enforcing valid join orders of IN joins --- the
rules for valid outer-join orders are somewhat similar.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
process of dropping roles by dropping objects owned by them and privileges
granted to them, or giving the owned objects to someone else, through the
use of the data stored in the new pg_shdepend catalog.
Some refactoring of the GRANT/REVOKE code was needed, as well as ALTER OWNER
code. Further cleanup of code duplication in the GRANT code seems necessary.
Implemented by me after an idea from Tom Lane, who also provided various kind
of implementation advice.
Regression tests pass. Some tests for the new functionality are also added,
as well as rudimentary documentation.
sense and rename to "outerjoin_delayed" to more clearly reflect what it
means). I had decided that it was redundant in 8.1, but the folly of this
is exposed by a bug report from Sebastian Böck. The place where it's
needed is to prevent orindxpath.c from cherry-picking arms of an outer-join
OR clause to form a relation restriction that isn't actually legal to push
down to the relation scan level. There may be some legal cases that this
forbids optimizing, but we'd need much closer analysis to determine it.
doesn't automatically inherit the privileges of roles it is a member of;
for such a role, membership in another role can be exploited only by doing
explicit SET ROLE. The default inherit setting is TRUE, so by default
the behavior doesn't change, but creating a user with NOINHERIT gives closer
adherence to our current reading of SQL99. Documentation still lacking,
and I think the information schema needs another look.
propagated inside an outer join. In particular, given
LEFT JOIN ON (A = B) WHERE A = constant, we cannot conclude that
B = constant at the top level (B might be null instead), but we
can nonetheless put a restriction B = constant into the quals for
B's relation, since no inner-side rows not meeting that condition
can contribute to the final result. Similarly, given
FULL JOIN USING (J) WHERE J = constant, we can't directly conclude
that either input J variable = constant, but it's OK to push such
quals into each input rel. Per recent gripe from Kim Bisgaard.
Along the way, remove 'valid_everywhere' flag from RestrictInfo,
as on closer analysis it was not being used for anything, and was
defined backwards anyway.
and pg_auth_members. There are still many loose ends to finish in this
patch (no documentation, no regression tests, no pg_dump support for
instance). But I'm going to commit it now anyway so that Alvaro can
make some progress on shared dependencies. The catalog changes should
be pretty much done.
in the database. The old behavior (reindex system catalogs only) is now
available as REINDEX SYSTEM. I did not add the complementary REINDEX USER
case since there did not seem to be consensus for this, but it would be
trivial to add later. Per recent discussions.
of a relation in a flat 'joininfo' list. The former arrangement grouped
the join clauses according to the set of unjoined relids used in each;
however, profiling on test cases involving lots of joins proves that
that data structure is a net loss. It takes more time to group the
join clauses together than is saved by avoiding duplicate tests later.
It doesn't help any that there are usually not more than one or two
clauses per group ...
a new PlannerInfo struct, which is passed around instead of the bare
Query in all the planning code. This commit is essentially just a
code-beautification exercise, but it does open the door to making
larger changes to the planner data structures without having to muck
with the widely-known Query struct.
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
in UPDATE. We also now issue a NOTICE if a query has _any_ implicit
range table entries -- in the past, we would only warn about implicit
RTEs in SELECTs with at least one explicit RTE.
As a result of the warning change, 25 of the regression tests had to
be updated. I also took the opportunity to remove some bogus whitespace
differences between some of the float4 and float8 variants. I believe
I have correctly updated all the platform-specific variants, but let
me know if that's not the case.
Original patch for DELETE ... USING from Euler Taveira de Oliveira,
reworked by Neil Conway.
few palloc's. I also chose to eliminate the restype and restypmod fields
entirely, since they are redundant with information stored in the node's
contained expression; re-examining the expression at need seems simpler
and more reliable than trying to keep restype/restypmod up to date.
initdb forced due to change in contents of stored rules.
implement any new feature, it just pushes the 'not implemented' error
message deeper into the backend. I also tweaked the grammar to accept
Oracle-ish parameter syntax (parameter name first), as well as the
SQL99 standard syntax (parameter mode first), since it was easy and
people will doubtless try to use both anyway.
whether or not it is a security definer. Changing a function's strictness
is required by SQL2003, and the other capabilities make sense. Also, allow
an optional RESTRICT noise word to be specified, for SQL conformance.
Some trivial regression tests added and the documentation has been
updated.
Formerly, if such a clause contained no aggregate functions we mistakenly
treated it as equivalent to WHERE. Per spec it must cause the query to
be treated as a grouped query of a single group, the same as appearance
of aggregate functions would do. Also, the HAVING filter must execute
after aggregate function computation even if it itself contains no
aggregate functions.
command. This is useful because we can allow truncation of tables
referenced by foreign keys, so long as the referencing table is
truncated in the same command.
Alvaro Herrera
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
of an inheritance child table is binary-compatible with the rowtype of
its parent, invent an expression node type that does the conversion
correctly. Fixes the new bug exhibited by Kris Shannon as well as a
lot of old bugs that would only show up when using multiple inheritance
or after altering the parent table.
clause implicitly whenever one is not given explicitly. Remove concept
of a schema having an associated tablespace, and simplify the rules for
selecting a default tablespace for a table or index. It's now just
(a) explicit TABLESPACE clause; (b) default_tablespace if that's not an
empty string; (c) database's default. This will allow pg_dump to use
SET commands instead of tablespace clauses to determine object locations
(but I didn't actually make it do so). All per recent discussions.
live in database or schema's default tablespace, as per today's discussion.
Also, remove some unused keywords from the grammar (PATH, PENDANT,
VERSION), and fix ALSO, which was added as a keyword but not added
to the keyword classification lists, thus making it worse-than-reserved.
aggregates, conversions, functions, operators, operator classes,
schemas, types, and tablespaces. Fold the existing implementations
of alter domain owner and alter database owner in with these.
Christopher Kings-Lynne
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
As a side effect, cause subscripts in INSERT targetlists to do something
more or less sensible; previously we evaluated such subscripts and then
effectively ignored them. Another side effect is that UPDATE-ing an
element or slice of an array value that is NULL now produces a non-null
result, namely an array containing just the assigned-to positions.
It was necessary to touch in grammar and create a new node to make home
to the new syntax. The command is also supported in E
CPG. Doc updates are attached too. Only superusers can change the owner
of the database. New owners don't need any aditional
privileges.
Euler Taveira de Oliveira
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
rather than allowing them only in a few special cases as before. In
particular you can now pass a ROW() construct to a function that accepts
a rowtype parameter. Internal generation of RowExprs fixes a number of
corner cases that used to not work very well, such as referencing the
whole-row result of a JOIN or subquery. This represents a further step in
the work I started a month or so back to make rowtype values into
first-class citizens.
* ALTER ... ADD COLUMN with defaults and NOT NULL constraints works per SQL
spec. A default is implemented by rewriting the table with the new value
stored in each row.
* ALTER COLUMN TYPE. You can change a column's datatype to anything you
want, so long as you can specify how to convert the old value. Rewrites
the table. (Possible future improvement: optimize no-op conversions such
as varchar(N) to varchar(N+1).)
* Multiple ALTER actions in a single ALTER TABLE command. You can perform
any number of column additions, type changes, and constraint additions with
only one pass over the table contents.
Basic documentation provided in ALTER TABLE ref page, but some more docs
work is needed.
Original patch from Rod Taylor, additional work from Tom Lane.
so that the 'val' is computed only once, per recent discussion. The
speedup is not much when 'val' is just a simple variable, but could be
significant for larger expressions. More importantly this avoids issues
with multiple evaluations of a volatile 'val', and it allows the CASE
expression to be reverse-listed in its original form by ruleutils.c.
for sure...). Rather than relying on the query context of a rangetable
entry to identify what permissions it wants checked, store a full AclMode
mask in each RTE, and check exactly those bits. This allows an RTE
specifying, say, INSERT privilege on a view to be copied into a derived
UPDATE query without changing meaning. Per recent discussion thread.
initdb forced due to change of stored rule representation.
intended to allow application authors to insulate themselves from
changes to the default value of 'default_with_oids' in future releases
of PostgreSQL.
This patch also fixes a bug in the earlier implementation of the
'default_with_oids' GUC variable: code in gram.y should not examine
the value of GUC variables directly due to synchronization issues.
parameters to be declared with names. pg_proc has a column to store
names, and CREATE FUNCTION can insert data into it, but that's all as
yet. I need to do more work on the pg_dump and plpgsql portions of the
patch before committing those, but I thought I'd get the bulky changes
in before the tree drifts under me.
initdb forced due to pg_proc change.
join conditions in which each OR subclause includes a constraint on
the same relation. This implements the other useful side-effect of
conversion to CNF format, without its unpleasant side-effects. As
per pghackers discussion of a few weeks ago.
fields: now they are valid whenever the clause is a binary opclause,
not only when it is a potential join clause (there is a new boolean
field canjoin to signal the latter condition). This lets us avoid
recomputing the relid sets over and over while examining indexes.
Still more work to do to make this as useful as it could be, because
there are places that could use the info but don't have access to the
RestrictInfo node.
be anything yielding an array of the proper kind, not only sub-ARRAY[]
constructs; do subscript checking at runtime not parse time. Also,
adjust array_cat to make array || array comply with the SQL99 spec.
Joe Conway
datatype by array_eq and array_cmp; use this to solve problems with memory
leaks in array indexing support. The parser's equality_oper and ordering_oper
routines also use the cache. Change the operator search algorithms to look
for appropriate btree or hash index opclasses, instead of assuming operators
named '<' or '=' have the right semantics. (ORDER BY ASC/DESC now also look
at opclasses, instead of assuming '<' and '>' are the right things.) Add
several more index opclasses so that there is no regression in functionality
for base datatypes. initdb forced due to catalog additions.
'scalar op ALL (array)', where the operator is applied between the
lefthand scalar and each element of the array. The operator must
yield boolean; the result of the construct is the OR or AND of the
per-element results, respectively.
Original coding by Joe Conway, after an idea of Peter's. Rewritten
by Tom to keep the implementation strictly separate from subqueries.
- LIKE <subtable> [ INCLUDING DEFAULTS | EXCLUDING DEFAULTS ]
- Quick cleanup of analyze.c function prototypes.
- New non-reserved keywords (INCLUDING, EXCLUDING, DEFAULTS), SQL 200X
Opted not to extend for check constraints at this time.
As per the definition that it's user defined columns, OIDs are NOT
inherited.
Doc and Source patches attached.
--
Rod Taylor <rbt@rbt.ca>
extensions to support our historical behavior. An aggregate belongs
to the closest query level of any of the variables in its argument,
or the current query level if there are no variables (e.g., COUNT(*)).
The implementation involves adding an agglevelsup field to Aggref,
and treating outer aggregates like outer variables at planning time.
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
expressions, ARRAY(sub-SELECT) expressions, some array functions.
Polymorphic functions using ANYARRAY/ANYELEMENT argument and return
types. Some regression tests in place, documentation is lacking.
Joe Conway, with some kibitzing from Tom Lane.
Add ALTER SEQUENCE to modify min/max/increment/cache/cycle values
Also updated create sequence docs to mention NO MINVALUE, & NO MAXVALUE.
New Files:
doc/src/sgml/ref/alter_sequence.sgml
src/test/regress/expected/sequence.out
src/test/regress/sql/sequence.sql
ALTER SEQUENCE is NOT transactional. It behaves similarly to setval().
It matches the proposed SQL200N spec, as well as Oracle in most ways --
Oracle lacks RESTART WITH for some strange reason.
--
Rod Taylor <rbt@rbt.ca>
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
codes, per discussion from last March. parse.h should now be included
*only* by gram.y, scan.l, keywords.c, parser.c. This prevents surprising
misbehavior after seemingly-trivial grammar adjustments.
rid of the assumption that sizeof(Oid)==sizeof(int). This is one small
step towards someday supporting 8-byte OIDs. For the moment, it doesn't
do much except get rid of a lot of unsightly casts.
startup, not in the parser; this allows ALTER DOMAIN to work correctly
with domain constraint operations stored in rules. Rod Taylor;
code review by Tom Lane.
There are two implementation techniques: the executor understands a new
JOIN_IN jointype, which emits at most one matching row per left-hand row,
or the result of the IN's sub-select can be fed through a DISTINCT filter
and then joined as an ordinary relation.
Along the way, some minor code cleanup in the optimizer; notably, break
out most of the jointree-rearrangement preprocessing in planner.c and
put it in a new file prep/prepjointree.c.
containing a volatile function), rather than only on 'Var = Var' clauses
as before. This makes it practical to do flatten_join_alias_vars at the
start of planning, which in turn eliminates a bunch of klugery inside the
planner to deal with alias vars. As a free side effect, we now detect
implied equality of non-Var expressions; for example in
SELECT ... WHERE a.x = b.y and b.y = 42
we will deduce a.x = 42 and use that as a restriction qual on a. Also,
we can remove the restriction introduced 12/5/02 to prevent pullup of
subqueries whose targetlists contain sublinks.
Still TODO: make statistical estimation routines in selfuncs.c and costsize.c
smarter about expressions that are more complex than plain Vars. The need
for this is considerably greater now that we have to be able to estimate
the suitability of merge and hash join techniques on such expressions.
Simplify SubLink by storing just a List of operator OIDs, instead of
a list of incomplete OpExprs --- that was a bizarre and bulky choice,
with no redeeming social value since we have to build new OpExprs
anyway when forming the plan tree.
'NOT (x IN (subselect))', that is 'NOT (x = ANY (subselect))',
rather than 'x <> ALL (subselect)' as we formerly did. This
opens the door to optimizing NOT IN the same way as IN, whereas
there's no hope of optimizing the expression using <>. Also,
convert 'x <> ALL (subselect)' to the NOT(IN) style, so that
the optimization will be available when processing rules dumped
by older Postgres versions.
initdb forced due to small change in SubLink node representation.
in the planned representation of a subplan at all any more, only SubPlan.
This means subselect.c doesn't scribble on its input anymore, which seems
like a good thing; and there are no longer three different possible
interpretations of a SubLink. Simplify node naming and improve comments
in primnodes.h. No change to stored rules, though.
make VALUE a non-reserved word again, use less invasive method of passing
ConstraintTestValue into transformExpr, fix problems with nested constraint
testing, do correct thing with NULL result from a constraint expression,
remove memory leak. Domain checks still need much more work if we are going
to allow ALTER DOMAIN, however.
so that all executable expression nodes inherit from a common supertype
Expr. This is somewhat of an exercise in code purity rather than any
real functional advance, but getting rid of the extra Oper or Func node
formerly used in each operator or function call should provide at least
a little space and speed improvement.
initdb forced by changes in stored-rules representation.
to plan nodes, not vice-versa. All executor state nodes now inherit from
struct PlanState. Copying of plan trees has been simplified by not
storing a list of SubPlans in Plan nodes (eliminating duplicate links).
The executor still needs such a list, but it can build it during
ExecutorStart since it has to scan the plan tree anyway.
No initdb forced since no stored-on-disk structures changed, but you
will need a full recompile because of node-numbering changes.
reliance on macros, in hopes of eliminating silly typos (like copying
to the wrong field) and just generally making it easier to see the forest
instead of the trees. As an example, here is the new code for A_Indices:
static A_Indices *
_copyAIndices(A_Indices *from)
{
A_Indices *newnode = makeNode(A_Indices);
COPY_NODE_FIELD(lidx);
COPY_NODE_FIELD(uidx);
return newnode;
}
static bool
_equalAIndices(A_Indices *a, A_Indices *b)
{
COMPARE_NODE_FIELD(lidx);
COMPARE_NODE_FIELD(uidx);
return true;
}
I plan to redo outfuncs/readfuncs in a similar style, but am committing
what I've got.
joinclauses is determined accurately for each join. Formerly, the code only
considered joinclauses that used all of the rels from the outer side of the
join; thus for example
FROM (a CROSS JOIN b) JOIN c ON (c.f1 = a.x AND c.f2 = b.y)
could not exploit a two-column index on c(f1,f2), since neither of the
qual clauses would be in the joininfo list it looked in. The new code does
this correctly, and also is able to eliminate redundant clauses, thus fixing
the problem noted 24-Oct-02 by Hans-Jürgen Schönig.
-hackers a couple days ago.
Notes/caveats:
- added regression tests for the new functionality, all
regression tests pass on my machine
- added pg_dump support
- updated PL/PgSQL to support per-statement triggers; didn't
look at the other procedural languages.
- there's (even) more code duplication in trigger.c than there
was previously. Any suggestions on how to refactor the
ExecXXXTriggers() functions to reuse more code would be
welcome -- I took a brief look at it, but couldn't see an
easy way to do it (there are several subtly-different
versions of the code in question)
- updated the documentation. I also took the liberty of
removing a big chunk of duplicated syntax documentation in
the Programmer's Guide on triggers, and moving that
information to the CREATE TRIGGER reference page.
- I also included some spelling fixes and similar small
cleanups I noticed while making the changes. If you'd like
me to split those into a separate patch, let me know.
Neil Conway
of groups produced by GROUP BY. This improves the accuracy of planning
estimates for grouped subselects, and is needed to check whether a
hashed aggregation plan risks memory overflow.
