We haven't wanted to do this in the past on the grounds that in rare
cases the original xmin value will be needed for forensic purposes, but
commit 37484ad2aa removes that objection,
so now we can.
Per extensive discussion, among many people, on pgsql-hackers.
Commit 37484ad2aa invalidated a good
chunk of documentation, so patch it up to reflect the new state of
play. Along the way, patch remaining documentation references to
FrozenXID to say instead FrozenTransactionId, so that they match the
way we actually spell it in the code.
This patch introduces generic support for ordered-set and hypothetical-set
aggregate functions, as well as implementations of the instances defined in
SQL:2008 (percentile_cont(), percentile_disc(), rank(), dense_rank(),
percent_rank(), cume_dist()). We also added mode() though it is not in the
spec, as well as versions of percentile_cont() and percentile_disc() that
can compute multiple percentile values in one pass over the data.
Unlike the original submission, this patch puts full control of the sorting
process in the hands of the aggregate's support functions. To allow the
support functions to find out how they're supposed to sort, a new API
function AggGetAggref() is added to nodeAgg.c. This allows retrieval of
the aggregate call's Aggref node, which may have other uses beyond the
immediate need. There is also support for ordered-set aggregates to
install cleanup callback functions, so that they can be sure that
infrastructure such as tuplesort objects gets cleaned up.
In passing, make some fixes in the recently-added support for variadic
aggregates, and make some editorial adjustments in the recent FILTER
additions for aggregates. Also, simplify use of IsBinaryCoercible() by
allowing it to succeed whenever the target type is ANY or ANYELEMENT.
It was inconsistent that it dealt with other polymorphic target types
but not these.
Atri Sharma and Andrew Gierth; reviewed by Pavel Stehule and Vik Fearing,
and rather heavily editorialized upon by Tom Lane
This fixes a problem noted as a followup to bug #8648: if a query has a
semantically-empty target list, e.g. SELECT * FROM zero_column_table,
ruleutils.c will dump it as a syntactically-empty target list, which was
not allowed. There doesn't seem to be any reliable way to fix this by
hacking ruleutils (note in particular that the originally zero-column table
might since have had columns added to it); and even if we had such a fix,
it would do nothing for existing dump files that might contain bad syntax.
The best bet seems to be to relax the syntactic restriction.
Also, add parse-analysis errors for SELECT DISTINCT with no columns (after
*-expansion) and RETURNING with no columns. These cases previously
produced unexpected behavior because the parsed Query looked like it had
no DISTINCT or RETURNING clause, respectively. If anyone ever offers
a plausible use-case for this, we could work a bit harder on making the
situation distinguishable.
Arguably this is a bug fix that should be back-patched, but I'm worried
that there may be client apps or PLs that expect "SELECT ;" to throw a
syntax error. The issue doesn't seem important enough to risk changing
behavior in minor releases.
WAL records of hint bit updates is useful to tools that want to examine
which pages have been modified. In particular, this is required to make
the pg_rewind tool safe (without checksums).
This can also be used to test how much extra WAL-logging would occur if
you enabled checksums, without actually enabling them (which you can't
currently do without re-initdb'ing).
Sawada Masahiko, docs by Samrat Revagade. Reviewed by Dilip Kumar, with
further changes by me.
This can be used to mark custom built binaries with an extra version
string such as a git describe identifier or distribution package release
version.
From: Oskari Saarenmaa <os@ohmu.fi>
Set min_recovery_apply_delay to force a delay in recovery apply for commit and
restore point WAL records. Other records are replayed immediately. Delay is
measured between WAL record time and local standby time.
Robert Haas, Fabrízio de Royes Mello and Simon Riggs
Detailed review by Mitsumasa Kondo
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
SQL-standard TABLE() is a subset of UNNEST(); they deal with arrays and
other collection types. This feature, however, deals with set-returning
functions. Use a different syntax for this feature to keep open the
possibility of implementing the standard TABLE().
This sets up ECDH key exchange, when compiling against OpenSSL that
supports EC. Then the ECDHE-RSA and ECDHE-ECDSA cipher suites can be
used for SSL connections. The latter one means that EC keys are now
usable.
The reason for EC key exchange is that it's faster than DHE and it
allows to go to higher security levels where RSA will be horribly slow.
There is also new GUC option ssl_ecdh_curve that specifies the curve
name used for ECDH. It defaults to "prime256v1", which is the most
common curve in use in HTTPS.
From: Marko Kreen <markokr@gmail.com>
Reviewed-by: Adrian Klaver <adrian.klaver@gmail.com>
The query ID is the internal hash identifier of the statement,
and was not available in pg_stat_statements view so far.
Daniel Farina, Sameer Thakur and Peter Geoghegan, reviewed by me.
By default, OpenSSL (and SSL/TLS in general) lets the client cipher
order take priority. This is OK for browsers where the ciphers were
tuned, but few PostgreSQL client libraries make the cipher order
configurable. So it makes sense to have the cipher order in
postgresql.conf take priority over client defaults.
This patch adds the setting "ssl_prefer_server_ciphers" that can be
turned on so that server cipher order is preferred. Per discussion,
this now defaults to on.
From: Marko Kreen <markokr@gmail.com>
Reviewed-by: Adrian Klaver <adrian.klaver@gmail.com>
Previously missing or invalid service files returned NULL. Also fix
pg_upgrade to report "out of memory" for a null return from
PQconndefaults().
Patch by Steve Singer, rewritten by me
I'm putting these up for review before I start to extract the relevant
subsets for the older branches. It'll be easier to make any suggested
wording improvements at this stage.
This is mostly to fix incorrect migration instructions: since the preceding
minor releases advised reindexing some GIST indexes, it's important that
we back-link to that advice rather than earlier instances.
Also improve some bug descriptions and fix a few typos.
No back-patch yet; these files will get copied into the back branches
later in the release process.
Reviewed-by: Ali Dar <ali.munir.dar@gmail.com>
Reviewed-by: Amit Khandekar <amit.khandekar@enterprisedb.com>
Reviewed-by: Rodolfo Campero <rodolfo.campero@anachronics.com>
Change SET LOCAL/CONSTRAINTS/TRANSACTION behavior outside of a
transaction block from error (post-9.3) to warning. (Was nothing in <=
9.3.) Also change ABORT outside of a transaction block from notice to
warning.
ECPG is not supposed to allow and output nested comments in C. These comments
are only allowed in the SQL parts and must not be written into the C file.
Also the different handling of different comments is documented.
This patch adds the ability to write TABLE( function1(), function2(), ...)
as a single FROM-clause entry. The result is the concatenation of the
first row from each function, followed by the second row from each
function, etc; with NULLs inserted if any function produces fewer rows than
others. This is believed to be a much more useful behavior than what
Postgres currently does with multiple SRFs in a SELECT list.
This syntax also provides a reasonable way to combine use of column
definition lists with WITH ORDINALITY: put the column definition list
inside TABLE(), where it's clear that it doesn't control the ordinality
column as well.
Also implement SQL-compliant multiple-argument UNNEST(), by turning
UNNEST(a,b,c) into TABLE(unnest(a), unnest(b), unnest(c)).
The SQL standard specifies TABLE() with only a single function, not
multiple functions, and it seems to require an implicit UNNEST() which is
not what this patch does. There may be something wrong with that reading
of the spec, though, because if it's right then the spec's TABLE() is just
a pointless alternative spelling of UNNEST(). After further review of
that, we might choose to adopt a different syntax for what this patch does,
but in any case this functionality seems clearly worthwhile.
Andrew Gierth, reviewed by Zoltán Böszörményi and Heikki Linnakangas, and
significantly revised by me
Formerly the planner had a hard-wired rule of thumb for guessing the amount
of space consumed by an aggregate function's transition state data. This
estimate is critical to deciding whether it's OK to use hash aggregation,
and in many situations the built-in estimate isn't very good. This patch
adds a column to pg_aggregate wherein a per-aggregate estimate can be
provided, overriding the planner's default, and infrastructure for setting
the column via CREATE AGGREGATE.
It may be that additional smarts will be required in future, perhaps even
a per-aggregate estimation function. But this is already a step forward.
This is extracted from a larger patch to improve the performance of numeric
and int8 aggregates. I (tgl) thought it was worth reviewing and committing
this infrastructure separately. In this commit, all built-in aggregates
are given aggtransspace = 0, so no behavior should change.
Hadi Moshayedi, reviewed by Pavel Stehule and Tomas Vondra
Pending patches for logical replication will use this to determine
which columns of a tuple ought to be considered as its candidate key.
Andres Freund, with minor, mostly cosmetic adjustments by me
These things didn't work because the planner omitted to do the necessary
preprocessing of a WindowFunc's argument list. Add the few dozen lines
of code needed to handle that.
Although this sounds like a feature addition, it's really a bug fix because
the default-argument case was likely to crash previously, due to lack of
checking of the number of supplied arguments in the built-in window
functions. It's not a security issue because there's no way for a
non-superuser to create a window function definition with defaults that
refers to a built-in C function, but nonetheless people might be annoyed
that it crashes rather than producing a useful error message. So
back-patch as far as the patch applies easily, which turns out to be 9.2.
I'll put a band-aid in earlier versions as a separate patch.
(Note that these features still don't work for aggregates, and fixing that
case will be harder since we represent aggregate arg lists as target lists
not bare expression lists. There's no crash risk though because CREATE
AGGREGATE doesn't accept defaults, and we reject named-argument notation
when parsing an aggregate call.)
For rather inscrutable reasons, SQL:2008 disallows copying-and-modifying a
window definition that has any explicit framing clause. The error message
we gave for this only made sense if the referencing window definition
itself contains an explicit framing clause, which it might well not.
Moreover, in the context of an OVER clause it's not exactly obvious that
"OVER (windowname)" implies copy-and-modify while "OVER windowname" does
not. This has led to multiple complaints, eg bug #5199 from Iliya
Krapchatov. Change to a hopefully more intelligible error message, and
in the case where we have just "OVER (windowname)", add a HINT suggesting
that omitting the parentheses will fix it. Also improve the related
documentation. Back-patch to all supported branches.
These variables no longer have any useful purpose, since there's no reason
to special-case brute force timezones now that we have a valid
session_timezone setting for them. Remove the variables, and remove the
SET/SHOW TIME ZONE code that deals with them.
The user-visible impact of this is that SHOW TIME ZONE will now show a
POSIX-style zone specification, in the form "<+-offset>-+offset", rather
than an interval value when a brute-force zone has been set. While perhaps
less intuitive, this is a better definition than before because it's
actually possible to give that string back to SET TIME ZONE and get the
same behavior, unlike what used to happen.
We did not previously mention the angle-bracket syntax when describing
POSIX timezone specifications; add some documentation so that people
can figure out what these strings do. (There's still quite a lot of
undocumented functionality there, but anybody who really cares can
go read the POSIX spec to find out about it. In practice most people
seem to prefer Olsen-style city names anyway.)
SGML documentation, as well as code comments, failed to note that an FDW's
validator will be applied to foreign-table options for foreign tables using
the FDW.
Etsuro Fujita
We don't need two index entries for lo_create pointing at the same section.
It's a bit pedantic for the toolchain to warn about this, but warn it does.
With these, one need no longer manipulate large object descriptors and
extract numeric constants from header files in order to read and write
large object contents from SQL.
Pavel Stehule, reviewed by Rushabh Lathia.
Move random() and setseed() to a separate table, to have them grouped
together. Also add a notice that random() is not cryptographically secure.
Original patch by Honza Horak, although I didn't use his version.
Add a makefile rule for building PDFs with FOP. Two new build targets
in doc/src/sgml are postgres-A4-fop.pdf and postgres-US-fop.pdf.
Run .fo output through xmllint for reformatting, so that errors are
easier to find. (The default output has hardly any line breaks, so you
might be looking for an error in column 20000.)
Set some XSLT parameters to optimize for building with FOP.
Remove some redundant or somewhat useless chapterinfo/author
information, because it renders strangely with the FO stylesheet.
Reviewed-by: Álvaro Herrera <alvherre@2ndquadrant.com>
Previously, unless all columns were auto-updateable, we wouldn't
inserts, updates, or deletes, or at least not without a rule or trigger;
now, we'll allow inserts and updates that target only the auto-updateable
columns, and deletes even if there are no auto-updateable columns at
all provided the view definition is otherwise suitable.
Dean Rasheed, reviewed by Marko Tiikkaja
Although previously-introduced APIs allow the process that registers a
background worker to obtain the worker's PID, there's no way to prevent
a worker that is not currently running from being restarted. This
patch introduces a new API TerminateBackgroundWorker() that prevents
the background worker from being restarted, terminates it if it is
currently running, and causes it to be unregistered if or when it is
not running.
Patch by me. Review by Michael Paquier and KaiGai Kohei.
Development of IRIX has been discontinued, and support is scheduled
to end in December of 2013. Therefore, there will be no supported
versions of this operating system by the time PostgreSQL 9.4 is
released. Furthermore, we have no maintainer for this platform.
The default table of contents in the XSLT HTML build is much too big and
deep. Configure it to look more like the one that is currently being
produced by the DSSSL build.
All of these platforms are very much obsolete.
As far as I can determine, the last version of SINIX, later renamed
Reliant, occurred some time between 2002 and 2005.
The last release of SunOS that would run on a sun3 was released in
November of 1991; the last release of OpenBSD which supported that
platform was in 2001. The highest clock speed of any processor in
the family was 25MHz.
The NS32K (national semiconductor 320xx) architecture was retired
in 1990.
Support can be re-added if a maintainer emerges for any of these
platforms, but it seems unlikely.
Reviewed by Andres Freund.
The XSLT toolchain requires an empty <index> element where the index is
supposed to appear. Add that with conditionals to hide it from the
DSSSL build.
The previous plan of having the check-tabs target a prerequisite of
"all" and "distprep" caused make distcheck to fail because make -q
distprep would never be satisfied. Put check-tabs into the html target
instead, so it is only called when a build actually happens.
make maintainer-check was obscure and rarely called in practice, and
many breakages were missed. Fold everything that make maintainer-check
used to do into the normal build. Specifically:
- Call duplicate_oids when genbki.pl is called.
- Check for tabs in SGML files when the documentation is built.
- Run msgfmt with the -c option during the regular build. Add an
additional configure check to see whether we are using the GNU
version. (make maintainer-check probably used to fail with non-GNU
msgfmt.)
Keep maintainer-check as around as phony target for the time being in
case anyone is calling it. But it won't do anything anymore.
Change the input/output format to {A,B,C}, to match the internal
representation.
Complete the implementations of line_in, line_out, line_recv, line_send.
Remove comments and error messages about the line type not being
implemented. Add regression tests for existing line operators and
functions.
Reviewed-by: rui hua <365507506hua@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Jeevan Chalke <jeevan.chalke@enterprisedb.com>
REFRESH MATERIALIZED VIEW CONCURRENTLY was broken for any matview
containing a column of a type without a default btree operator
class. It also did not produce results consistent with a non-
concurrent REFRESH or a normal view if any column was of a type
which allowed user-visible differences between values which
compared as equal according to the type's default btree opclass.
Concurrent matview refresh was modified to use the new operators
to solve these problems.
Documentation was added for record comparison, both for the
default btree operator class for record, and the newly added
operators. Regression tests now check for proper behavior both
for a matview with a box column and a matview containing a citext
column.
Reviewed by Steve Singer, who suggested some of the doc language.
This option provides more detailed error messages when STRICT is used
and the number of rows returned is not one.
Marko Tiikkaja, reviewed by Ian Lawrence Barwick
Isolate transaction latency (elapsed time between submitting first
command and receiving response to last command) from client-side delays
pertaining to the --rate schedule. Under --rate, report schedule lag as
defined in the documentation. Report latency standard deviation
whenever we collect the measurements to do so. All of these changes
affect --progress messages and the final report.
Fabien COELHO, reviewed by Pavel Stehule.
DISCARD ALL will now discard cached sequence information, as well.
Fabrízio de Royes Mello, reviewed by Zoltán Böszörményi, with some
further tweaks by me.
Previously, arbitray system columns could be mentioned in table
constraints, but they were not correctly checked at runtime, because
the values weren't actually set correctly in the tuple. Since it
seems easy enough to initialize the table OID properly, do that,
and continue allowing that column, but disallow the rest unless and
until someone figures out a way to make them work properly.
No back-patch, because this doesn't seem important enough to take the
risk of destabilizing the back branches. In fact, this will pose a
dump-and-reload hazard for those upgrading from previous versions:
constraints that were accepted before but were not correctly enforced
will now either be enforced correctly or not accepted at all. Either
could result in restore failures, but in practice I think very few
users will notice the difference, since the use case is pretty
marginal anyway and few users will be relying on features that have
not historically worked.
Amit Kapila, reviewed by Rushabh Lathia, with doc changes by me.
Commit 95ef6a3448 removed the
ability to create rules on an individual column as of 7.3, but
left some residual code which has since been useless. This cleans
up that dead code without any change in behavior other than
dropping the useless column from the catalog.
The previous coding attempted to activate all the GUC settings specified
in SET clauses, so that the function validator could operate in the GUC
environment expected by the function body. However, this is problematic
when restoring a dump, since the SET clauses might refer to database
objects that don't exist yet. We already have the parameter
check_function_bodies that's meant to prevent forward references in
function definitions from breaking dumps, so let's change CREATE FUNCTION
to not install the SET values if check_function_bodies is off.
Authors of function validators were already advised not to make any
"context sensitive" checks when check_function_bodies is off, if indeed
they're checking anything at all in that mode. But extend the
documentation to point out the GUC issue in particular.
(Note that we still check the SET clauses to some extent; the behavior
with !check_function_bodies is now approximately equivalent to what ALTER
DATABASE/ROLE have been doing for awhile with context-dependent GUCs.)
This problem can be demonstrated in all active branches, so back-patch
all the way.
There's no inherent reason why an aggregate function can't be variadic
(even VARIADIC ANY) if its transition function can handle the case.
Indeed, this patch to add the feature touches none of the planner or
executor, and little of the parser; the main missing stuff was DDL and
pg_dump support.
It is true that variadic aggregates can create the same sort of ambiguity
about parameters versus ORDER BY keys that was complained of when we
(briefly) had both one- and two-argument forms of string_agg(). However,
the policy formed in response to that discussion only said that we'd not
create any built-in aggregates with varying numbers of arguments, not that
we shouldn't allow users to do it. So the logical extension of that is
we can allow users to make variadic aggregates as long as we're wary about
shipping any such in core.
In passing, this patch allows aggregate function arguments to be named, to
the extent of remembering the names in pg_proc and dumping them in pg_dump.
You can't yet call an aggregate using named-parameter notation. That seems
like a likely future extension, but it'll take some work, and it's not what
this patch is really about. Likewise, there's still some work needed to
make window functions handle VARIADIC fully, but I left that for another
day.
initdb forced because of new aggvariadic field in Aggref parse nodes.
I started out just to fix the broken markup in commit
1c20857661, but got distracted by
copy-editing. I see Bruce already fixed the markup, but I'll
commit the wordsmithing anyway.
It seems like a good idea to update these examples since some fairly
basic planner behaviors have changed in 9.3; notably that the startup cost
for an indexscan plan node is no longer invariably estimated at 0.00.
Using the infrastructure provided by this patch, it's possible either
to wait for the startup of a dynamically-registered background worker,
or to poll the status of such a worker without waiting. In either
case, the current PID of the worker process can also be obtained.
As usual, worker_spi is updated to demonstrate the new functionality.
Patch by me. Review by Andres Freund.
We already did this for -t (--table) in 9.3, but missed the other similar
options. For consistency, allow all of them to be specified multiple times.
Unfortunately it's too late to sneak this into 9.3, so commit to master
only.
Currently we don't need to update the pg_tablespace catalog
after redefining the symbolic links to the tablespaces
because pg_tablespace.spclocation column was removed in
PostgreSQL 9.2.
Back patch to 9.2 where pg_tablespace.spclocation was removed.
Ian Barwick, with minor change by me.
plpgsql often just remembers SPI-result tuple tables in local variables,
and has no mechanism for freeing them if an ereport(ERROR) causes an escape
out of the execution function whose local variable it is. In the original
coding, that wasn't a problem because the tuple table would be cleaned up
when the function's SPI context went away during transaction abort.
However, once plpgsql grew the ability to trap exceptions, repeated
trapping of errors within a function could result in significant
intra-function-call memory leakage, as illustrated in bug #8279 from
Chad Wagner.
We could fix this locally in plpgsql with a bunch of PG_TRY/PG_CATCH
coding, but that would be tedious, probably slow, and prone to bugs of
omission; moreover it would do nothing for similar risks elsewhere.
What seems like a better plan is to make SPI itself responsible for
freeing tuple tables at subtransaction abort. This patch attacks the
problem that way, keeping a list of live tuple tables within each SPI
function context. Currently, such freeing is automatic for tuple tables
made within the failed subtransaction. We might later add a SPI call to
mark a tuple table as not to be freed this way, allowing callers to opt
out; but until someone exhibits a clear use-case for such behavior, it
doesn't seem worth bothering.
A very useful side-effect of this change is that SPI_freetuptable() can
now defend itself against bad calls, such as duplicate free requests;
this should make things more robust in many places. (In particular,
this reduces the risks involved if a third-party extension contains
now-redundant SPI_freetuptable() calls in error cleanup code.)
Even though the leakage problem is of long standing, it seems imprudent
to back-patch this into stable branches, since it does represent an API
semantics change for SPI users. We'll patch this in 9.3, but live with
the leakage in older branches.
In my previous change to make pgstattuple use SnapshotDirty rather
than SnapshotNow, I failed to notice that the documenation also
needed to be updated to match. Fix.
This adds the ability to get the call stack as a string from within a
PL/PgSQL function, which can be handy for logging to a table, or to
include in a useful message to an end-user.
Pavel Stehule, reviewed by Rushabh Lathia and rather heavily whacked
around by Stephen Frost.
This controls the target transaction rate to certain tps, rather than
maximum. Patch contributed by Fabien COELHO, reviewed by Greg Smith,
and slight editing by me.
Per discussion on pgsql-hackers, these aren't really needed. Interim
versions of the background worker patch had the worker starting with
signals already unblocked, which would have made this necessary.
But the final version does not, so we don't really need it; and it
doesn't work well with the new facility for starting dynamic background
workers, so just rip it out.
Also per discussion on pgsql-hackers, back-patch this change to 9.3.
It's best to get the API break out of the way before we do an
official release of this facility, to avoid more pain for extension
authors later.
Also, tweak wording in comments (per Andres) and documentation (myself)
to point out that it's the database's default tablespace that can be
passed as 0, not DEFAULTTABLESPACE_OID. Robert Haas noticed the bug in
the code, but didn't update the accompanying prose.
Future patches are expected to introduce logical replication that
works by decoding WAL. WAL contains relfilenodes rather than relation
OIDs, so this infrastructure will be needed to find the relation OID
based on WAL contents.
If logical replication does not make it into this release, we probably
should consider reverting this, since it will add some overhead to DDL
operations that create new relations. One additional index insert per
pg_class row is not a large overhead, but it's more than zero.
Another way of meeting the needs of logical replication would be to
the relation OID to WAL, but that would burden DML operations, not
only DDL.
Andres Freund, with some changes by me. Design review, in earlier
versions, by Álvaro Herrera.
For simple views which are automatically updatable, this patch allows
the user to specify what level of checking should be done on records
being inserted or updated. For 'LOCAL CHECK', new tuples are validated
against the conditionals of the view they are being inserted into, while
for 'CASCADED CHECK' the new tuples are validated against the
conditionals for all views involved (from the top down).
This option is part of the SQL specification.
Dean Rasheed, reviewed by Pavel Stehule
This allows us to specify the target relation with several expressions,
'relname', 'schemaname.relname' and OID in all pgstattuple functions.
pgstatindex() and pg_relpages() could not accept OID as the argument
so far.
Per discussion on -hackers, we decided to keep two types of interfaces,
with regclass-type and TEXT-type argument, for each pgstattuple
function because of the backward-compatibility issue. The functions
which have TEXT-type argument will be deprecated in the future release.
Patch by Satoshi Nagayasu, reviewed by Rushabh Lathia and Fujii Masao.
The documentation for ALTER VIEW had a minor copy-and-paste error in
defining the parameters. Noticed when reviewing the WITH CHECK OPTION
patch.
Backpatch to 9.2 where this was first introduced.
This is SQL-standard with a few extensions, namely support for
subqueries and outer references in clause expressions.
catversion bump due to change in Aggref and WindowFunc.
David Fetter, reviewed by Dean Rasheed.
This allows reads to continue without any blocking while a REFRESH
runs. The new data appears atomically as part of transaction
commit.
Review questioned the Assert that a matview was not a system
relation. This will be addressed separately.
Reviewed by Hitoshi Harada, Robert Haas, Andres Freund.
Merged after review with security patch f3ab5d4.
There is a new API, RegisterDynamicBackgroundWorker, which allows
an ordinary user backend to register a new background writer during
normal running. This means that it's no longer necessary for all
background workers to be registered during processing of
shared_preload_libraries, although the option of registering workers
at that time remains available.
When a background worker exits and will not be restarted, the
slot previously used by that background worker is automatically
released and becomes available for reuse. Slots used by background
workers that are configured for automatic restart can't (yet) be
released without shutting down the system.
This commit adds a new source file, bgworker.c, and moves some
of the existing control logic for background workers there.
Previously, there was little enough logic that it made sense to
keep everything in postmaster.c, but not any more.
This commit also makes the worker_spi contrib module into an
extension and adds a new function, worker_spi_launch, which can
be used to demonstrate the new facility.
This is like shared_preload_libraries except that it takes effect at
backend start and can be changed without a full postmaster restart. It
is like local_preload_libraries except that it is still only settable by
a superuser. This can be a better way to load modules such as
auto_explain.
Since there are now three preload parameters, regroup the documentation
a bit. Put all parameters into one section, explain common
functionality only once, update the descriptions to reflect current and
future realities.
Reviewed-by: Dimitri Fontaine <dimitri@2ndQuadrant.fr>
This makes superuser-issued REFRESH MATERIALIZED VIEW safe regardless of
the object's provenance. REINDEX is an earlier example of this pattern.
As a downside, functions called from materialized views must tolerate
running in a security-restricted operation. CREATE MATERIALIZED VIEW
need not change user ID. Nonetheless, avoid creation of materialized
views that will invariably fail REFRESH by making it, too, start a
security-restricted operation.
Back-patch to 9.3 so materialized views have this from the beginning.
Reviewed by Kevin Grittner.
Previously, pg_upgrade docs recommended using .pgpass if using MD5
authentication to avoid being prompted for a password. Turns out pg_ctl
never prompts for a password, so MD5 requires .pgpass --- document that.
Also recommend 'peer' for authentication too.
Backpatch back to 9.1.
The old implementation converted PostgreSQL numeric to Python float,
which was always considered a shortcoming. Now numeric is converted to
the Python Decimal object. Either the external cdecimal module or the
standard library decimal module are supported.
From: Szymon Guz <mabewlun@gmail.com>
From: Ronan Dunklau <rdunklau@gmail.com>
Reviewed-by: Steve Singer <steve@ssinger.info>
This value, now pg_stat_all_tables.n_mod_since_analyze, was already
tracked and used by autovacuum, but not exposed to the user.
Mark Kirkwood, review by Laurenz Albe
In 9.3, there's no particular limit on the number of bgworkers;
instead, we just count up the number that are actually registered,
and use that to set MaxBackends. However, that approach causes
problems for Hot Standby, which needs both MaxBackends and the
size of the lock table to be the same on the standby as on the
master, yet it may not be desirable to run the same bgworkers in
both places. 9.3 handles that by failing to notice the problem,
which will probably work fine in nearly all cases anyway, but is
not theoretically sound.
A further problem with simply counting the number of registered
workers is that new workers can't be registered without a
postmaster restart. This is inconvenient for administrators,
since bouncing the postmaster causes an interruption of service.
Moreover, there are a number of applications for background
processes where, by necessity, the background process must be
started on the fly (e.g. parallel query). While this patch
doesn't actually make it possible to register new background
workers after startup time, it's a necessary prerequisite.
Patch by me. Review by Michael Paquier.
Treat TOAST index just the same as normal one and get the OID
of TOAST index from pg_index but not pg_class.reltoastidxid.
This change allows us to handle multiple TOAST indexes, and
which is required infrastructure for upcoming
REINDEX CONCURRENTLY feature.
Patch by Michael Paquier, reviewed by Andres Freund and me.
Specifically, permit attaching them to the error in RAISE and retrieving
them from a caught error in GET STACKED DIAGNOSTICS. RAISE enforces
nothing about the content of the fields; for its purposes, they are just
additional string fields. Consequently, clarify in the protocol and
libpq documentation that the usual relationships between error fields,
like a schema name appearing wherever a table name appears, are not
universal. This freedom has other applications; consider a FDW
propagating an error from an RDBMS having no schema support.
Back-patch to 9.3, where core support for the error fields was
introduced. This prevents the confusion of having a release where libpq
exposes the fields and PL/pgSQL does not.
Pavel Stehule, lexical revisions by Noah Misch.
Make it easier for readers of the FP docs to find out about possibly
truncated values.
Per complaint from Tom Duffey in message
F0E0F874-C86F-48D1-AA2A-0C5365BF5118@trillitech.com
Author: Albe Laurenz
Reviewed by: Abhijit Menon-Sen
SnapshotNow scans have the undesirable property that, in the face of
concurrent updates, the scan can fail to see either the old or the new
versions of the row. In many cases, we work around this by requiring
DDL operations to hold AccessExclusiveLock on the object being
modified; in some cases, the existing locking is inadequate and random
failures occur as a result. This commit doesn't change anything
related to locking, but will hopefully pave the way to allowing lock
strength reductions in the future.
The major issue has held us back from making this change in the past
is that taking an MVCC snapshot is significantly more expensive than
using a static special snapshot such as SnapshotNow. However, testing
of various worst-case scenarios reveals that this problem is not
severe except under fairly extreme workloads. To mitigate those
problems, we avoid retaking the MVCC snapshot for each new scan;
instead, we take a new snapshot only when invalidation messages have
been processed. The catcache machinery already requires that
invalidation messages be sent before releasing the related heavyweight
lock; else other backends might rely on locally-cached data rather
than scanning the catalog at all. Thus, making snapshot reuse
dependent on the same guarantees shouldn't break anything that wasn't
already subtly broken.
Patch by me. Review by Michael Paquier and Andres Freund.
On Unix, you can embed double-quotes in single-quotes, and via versa.
However, on Windows, you can only escape double-quotes in double-quotes,
so use that in the pg_dump -t/table example.
Backpatch to 9.3.
Report from Mike Toews
Add ability for to_char() to output the timezone's UTC offset (OF). We
already have the ability to return the timezone abbeviation (TZ/tz).
Per request from Andrew Dunstan
Previous code had old/new prefixes on option values, e.g.
--old-datadir=OLDDATADIR. Remove them, for simplicity; now:
--old-datadir=DATADIR. Also update docs to do the same.
On immediate shutdown, or during a restart-after-crash sequence,
postmaster used to send SIGQUIT (and then abandon ship if shutdown); but
this is not a good strategy if backends don't die because of that
signal. (This might happen, for example, if a backend gets tangled
trying to malloc() due to gettext(), as in an example illustrated by
MauMau.) This causes problems when later trying to restart the server,
because some processes are still attached to the shared memory segment.
Instead of just abandoning such backends to their fates, we now have
postmaster hang around for a little while longer, send a SIGKILL after
some reasonable waiting period, and then exit. This makes immediate
shutdown more reliable.
There is disagreement on whether it's best for postmaster to exit after
sending SIGKILL, or to stick around until all children have reported
death. If this controversy is resolved differently than what this patch
implements, it's an easy change to make.
Bug reported by MauMau in message 20DAEA8949EC4E2289C6E8E58560DEC0@maumau
MauMau and Álvaro Herrera
Change -u (user) option to -U, for consistency with other tools like
pg_dump and psql. Also expand --user to --username, again for
consistency.
BACKWARD INCOMPATIBILITY
Adjust the wording in the first para of "Sequence Manipulation Functions"
so that neither of the link phrases in it break across line boundaries,
in either A4- or US-page-size PDF output. This fixes a reported build
failure for the 9.3beta2 A4 PDF docs, and future-proofs this particular
para against causing similar problems in future. (Perhaps somebody will
fix this issue in the SGML/TeX documentation tool chain someday, but I'm
not holding my breath.)
Back-patch to all supported branches, since the same problem could rise up
to bite us in future updates if anyone changes anything earlier than this
in func.sgml.
Bruce Momjian
Peter Eisentraut
Robert Haas
Tom Lane
Fujii Masao
Tatsuo Ishii
Heikki Linnakangas
Magnus Hagander
Simon Riggs
Noah Misch
Kevin Grittner
Michael Meskes
Andrew Dunstan
Jeff Davis
Greg Stark
Stephen Frost
Alvaro Herrera