Now that it has only INH_NO and INH_YES values, it's just weird that
it's not a plain bool, so make it that way.
Also rename RangeVar.inhOpt to "inh", to be like RangeTblEntry.inh.
My recollection is that we gave it a different name specifically because
it had a different representation than the derived bool value, but it
no longer does. And this is a good forcing function to be sure we
catch any places that are affected by the change.
Bump catversion because of possible effect on stored RangeVar nodes.
I'm not exactly convinced that we ever store RangeVar on disk, but
we have a readfuncs function for it, so be cautious. (If we do do so,
then commit e13486eba was in error not to bump catversion.)
Follow-on to commit e13486eba.
Discussion: http://postgr.es/m/CA+TgmoYe+EG7LdYX6pkcNxr4ygkP4+A=jm9o-CPXyOvRiCNwaQ@mail.gmail.com
Table partitioning is like table inheritance and reuses much of the
existing infrastructure, but there are some important differences.
The parent is called a partitioned table and is always empty; it may
not have indexes or non-inherited constraints, since those make no
sense for a relation with no data of its own. The children are called
partitions and contain all of the actual data. Each partition has an
implicit partitioning constraint. Multiple inheritance is not
allowed, and partitioning and inheritance can't be mixed. Partitions
can't have extra columns and may not allow nulls unless the parent
does. Tuples inserted into the parent are automatically routed to the
correct partition, so tuple-routing ON INSERT triggers are not needed.
Tuple routing isn't yet supported for partitions which are foreign
tables, and it doesn't handle updates that cross partition boundaries.
Currently, tables can be range-partitioned or list-partitioned. List
partitioning is limited to a single column, but range partitioning can
involve multiple columns. A partitioning "column" can be an
expression.
Because table partitioning is less general than table inheritance, it
is hoped that it will be easier to reason about properties of
partitions, and therefore that this will serve as a better foundation
for a variety of possible optimizations, including query planner
optimizations. The tuple routing based which this patch does based on
the implicit partitioning constraints is an example of this, but it
seems likely that many other useful optimizations are also possible.
Amit Langote, reviewed and tested by Robert Haas, Ashutosh Bapat,
Amit Kapila, Rajkumar Raghuwanshi, Corey Huinker, Jaime Casanova,
Rushabh Lathia, Erik Rijkers, among others. Minor revisions by me.
We have had support for restrictive RLS policies since 9.5, but they
were only available through extensions which use the appropriate hooks.
This adds support into the grammer, catalog, psql and pg_dump for
restrictive RLS policies, thus reducing the cases where an extension is
necessary.
In passing, also move away from using "AND"d and "OR"d in comments.
As pointed out by Alvaro, it's not really appropriate to attempt
to make verbs out of "AND" and "OR", so reword those comments which
attempted to.
Reviewed By: Jeevan Chalke, Dean Rasheed
Discussion: https://postgr.es/m/20160901063404.GY4028@tamriel.snowman.net
This works like function_with_argtypes, but aggregates allow slightly
different arguments.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
It was apparently added for use by GRANT/REVOKE, but move it closer to
where other function signature related things are kept.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Instead of sometimes referring to a function signature like func_name
func_args, use the existing function_with_argtypes symbol, which
combines the two.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Previously, the right-hand side of a multiple-column assignment, if it
wasn't a sub-SELECT, had to be a simple parenthesized expression list,
because gram.y was responsible for "bursting" the construct into
independent column assignments. This had the minor defect that you
couldn't write ROW (though you should be able to, since the standard says
this is a row constructor), and the rather larger defect that unlike other
uses of row constructors, we would not expand a "foo.*" item into multiple
columns.
Fix that by changing the RHS to be just "a_expr" in the grammar, leaving
it to transformMultiAssignRef to separate the elements of a RowExpr;
which it will do only after performing standard transformation of the
RowExpr, so that "foo.*" behaves as expected.
The key reason we didn't do that before was the hard-wired handling of
DEFAULT tokens (SetToDefault nodes). This patch deals with that issue by
allowing DEFAULT in any a_expr and having parse analysis throw an error
if SetToDefault is found in an unexpected place. That's an improvement
anyway since the error can be more specific than just "syntax error".
The SQL standard suggests that the RHS could be any a_expr yielding a
suitable row value. This patch doesn't really move the goal posts in that
respect --- you're still limited to RowExpr or a sub-SELECT --- but it does
fix the grammar restriction, so it provides some tangible progress towards
a full implementation. And the limitation is now documented by an explicit
error message rather than an unhelpful "syntax error".
Discussion: <8542.1479742008@sss.pgh.pa.us>
This is infrastructure for the complete SQL standard feature. No
support is included at this point for execution nodes or PLs. The
intent is to add that soon.
As this patch leaves things, standard syntax can create tuplestores
to contain old and/or new versions of rows affected by a statement.
References to these tuplestores are in the TriggerData structure.
C triggers can access the tuplestores directly, so they are usable,
but they cannot yet be referenced within a SQL statement.
Without this, an extension containing an access method is not properly
dumped/restored during pg_upgrade --- the AM ends up not being a member
of the extension after upgrading.
Another oversight in commit 473b93287, reported by Andrew Dunstan.
Report: <f7ac29f3-515c-2a44-21c5-ec925053265f@dunslane.net>
Not much to be said about this patch: it does what it says on the tin.
In passing, rename AlterEnumStmt.skipIfExists to skipIfNewValExists
to clarify what it actually does. In the discussion of this patch
we considered supporting other similar options, such as IF EXISTS
on the type as a whole or IF NOT EXISTS on the target name. This
patch doesn't actually add any such feature, but it might happen later.
Dagfinn Ilmari Mannsåker, reviewed by Emre Hasegeli
Discussion: <CAO=2mx6uvgPaPDf-rHqG8=1MZnGyVDMQeh8zS4euRyyg4D35OQ@mail.gmail.com>
Add a location field to the DefElem struct, used to parse many utility
commands. Update various error messages to supply error position
information.
To propogate the error position information in a more systematic way,
create a ParseState in standard_ProcessUtility() and pass that to
interested functions implementing the utility commands. This seems
better than passing the query string and then reassembling a parse state
ad hoc, which violates the encapsulation of the ParseState type.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
We implement a dozen or so parameterless functions that the SQL standard
defines special syntax for. Up to now, that was done by converting them
into more or less ad-hoc constructs such as "'now'::text::date". That's
messy for multiple reasons: it exposes what should be implementation
details to users, and performance is worse than it needs to be in several
cases. To improve matters, invent a new expression node type
SQLValueFunction that can represent any of these parameterless functions.
Bump catversion because this changes stored parsetrees for rules.
Discussion: <30058.1463091294@sss.pgh.pa.us>
Apparently that's not obvious to everybody, so let's belabor the point.
In passing, document that DROP POLICY has CASCADE/RESTRICT options (which
it does, per gram.y) but they do nothing (I assume, anyway). Also update
some long-obsolete commentary in gram.y.
Discussion: <20160805104837.1412.84915@wrigleys.postgresql.org>
Now that we've nailed down the principle that NullTest with !argisrow
is fully equivalent to SQL's IS [NOT] DISTINCT FROM NULL, let's teach
the parser about it. This produces a slightly more compact parse tree
and is much more amenable to optimization than a DistinctExpr, since
the planner knows a good deal about NullTest and next to nothing about
DistinctExpr.
I'm not sure that there are all that many queries in the wild that could
be improved by this, but at least one source of such cases is the patch
just made to postgres_fdw to emit IS [NOT] DISTINCT FROM NULL when
IS [NOT] NULL isn't semantically correct.
No back-patch, since to the extent that this does affect planning results,
it might be considered undesirable plan destabilization.
If you really want to vacuum every single page in the relation,
regardless of apparent visibility status or anything else, you can use
this option. In previous releases, this behavior could be achieved
using VACUUM (FREEZE), but because we can now recognize all-frozen
pages as not needing to be frozen again, that no longer works. There
should be no need for routine use of this option, but maybe bugs or
disaster recovery will necessitate its use.
Patch by me, reviewed by Andres Freund.
It'd be good for "(x AND y) AND z" to produce a three-child AND node
whether or not operator_precedence_warning is on, but that failed to
happen when it's on because makeAndExpr() didn't look through the added
AEXPR_PAREN node. This has no effect on generated plans because prepqual.c
would flatten the AND nest anyway; but it does affect the number of parens
printed in ruleutils.c, for example. I'd already fixed some similar
hazards in parse_expr.c in commit abb164655, but didn't think to search
gram.y for problems of this ilk. Per gripe from Jean-Pierre Pelletier.
Report: <fa0535ec6d6428cfec40c7e8a6d11156@mail.gmail.com>
Dating back to commit f10b63923, our grammar has allowed "USING" to
optionally appear before an opclass name in CREATE INDEX (and, lately,
some related places such as ON CONFLICT specifications). Nikolay Shaplov
noticed that this syntax existed but wasn't documented, and proposed
documenting it. But what seems like a better idea is to remove the
production, thereby making the code match the docs not vice versa.
This isn't our usual modus operandi for such cases, but there are a
couple of good reasons to proceed this way:
* So far as I can find, this syntax has never been documented anywhere.
It isn't relied on by any of our own code or test cases, and there seems
little reason to suppose that it's been used in the wild either.
* Documenting it would mean that there would be two separate uses of
USING in the CREATE INDEX syntax, the other being "USING access_method".
That can lead to nothing but confusion.
So, let's just remove it. On the off chance that somebody somewhere
is using it, this isn't something to back-patch, but we can fix it
in HEAD.
Discussion: <1593237.l7oKHRpxSe@nataraj-amd64>
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
This introduces a new dependency type which marks an object as depending
on an extension, such that if the extension is dropped, the object
automatically goes away; and also, if the database is dumped, the object
is included in the dump output. Currently the grammar supports this for
indexes, triggers, materialized views and functions only, although the
utility code is generic so adding support for more object types is a
matter of touching the parser rules only.
Author: Abhijit Menon-Sen
Reviewed-by: Alexander Korotkov, Álvaro Herrera
Discussion: http://www.postgresql.org/message-id/20160115062649.GA5068@toroid.org
This enables external code to create access methods. This is useful so
that extensions can add their own access methods which can be formally
tracked for dependencies, so that DROP operates correctly. Also, having
explicit support makes pg_dump work correctly.
Currently only index AMs are supported, but we expect different types to
be added in the future.
Authors: Alexander Korotkov, Petr Jelínek
Reviewed-By: Teodor Sigaev, Petr Jelínek, Jim Nasby
Commitfest-URL: https://commitfest.postgresql.org/9/353/
Discussion: https://www.postgresql.org/message-id/CAPpHfdsXwZmojm6Dx+TJnpYk27kT4o7Ri6X_4OSWcByu1Rm+VA@mail.gmail.com
Now that we know about the %top{} trick, we can revert to building flex
lexers as separate .o files. This is worth doing for a couple of reasons
besides sheer cleanliness. We can narrow the scope of the -Wno-error flag
that's forced on scan.c. Also, since these grammar and lexer files are
so large, splitting them into separate build targets should have some
advantages in build speed, particularly in parallel or ccache'd builds.
We have quite a few other .l files that could be changed likewise, but the
above arguments don't apply to them, so the benefit of fixing them seems
pretty minimal. Leave the rest for some other day.
Omitted boundaries represent the upper or lower limit of the corresponding
array subscript. This allows simpler specification of many common
use-cases.
(Revised version of commit 9246af6799)
YUriy Zhuravlev
FOREIGN KEY constraints have behaved this way for a long time, but for
some reason the behavior of CHECK constraints has been inconsistent up
until now.
Amit Langote and Amul Sul, with assorted tweaks by me.
Once upon a time we did not have a separate CREATEROLE privilege, and
CREATEUSER effectively meant SUPERUSER. When we invented CREATEROLE
(in 8.1) we also added SUPERUSER so as to have a less confusing keyword
for this role property. However, we left CREATEUSER in place as a
deprecated synonym for SUPERUSER, because of backwards-compatibility
concerns. It's still there and is still confusing people, as for example
in bug #13694 from Justin Catterson. 9.6 will be ten years or so later,
which surely ought to be long enough to end the deprecation and just
remove these old keywords. Hence, do so.
To allow users to force RLS to always be applied, even for table owners,
add ALTER TABLE .. FORCE ROW LEVEL SECURITY.
row_security=off overrides FORCE ROW LEVEL SECURITY, to ensure pg_dump
output is complete (by default).
Also add SECURITY_NOFORCE_RLS context to avoid data corruption when
ALTER TABLE .. FORCE ROW SECURITY is being used. The
SECURITY_NOFORCE_RLS security context is used only during referential
integrity checks and is only considered in check_enable_rls() after we
have already checked that the current user is the owner of the relation
(which should always be the case during referential integrity checks).
Back-patch to 9.5 where RLS was added.
Without CASCADE, if an extension has an unfullfilled dependency on
another extension, CREATE EXTENSION ERRORs out with "required extension
... is not installed". That is annoying, especially when that dependency
is an implementation detail of the extension, rather than something the
extension's user can make sense of.
In addition to CASCADE this also includes a small set of regression
tests around CREATE EXTENSION.
Author: Petr Jelinek, editorialized by Michael Paquier, Andres Freund
Reviewed-By: Michael Paquier, Andres Freund, Jeff Janes
Discussion: 557E0520.3040800@2ndquadrant.com
Commit 924bcf4f16 introduced a framework
for parallel computation in PostgreSQL that makes most but not all
built-in functions safe to execute in parallel mode. In order to have
parallel query, we'll need to be able to determine whether that query
contains functions (either built-in or user-defined) that cannot be
safely executed in parallel mode. This requires those functions to be
labeled, so this patch introduces an infrastructure for that. Some
functions currently labeled as safe may need to be revised depending on
how pending issues related to heavyweight locking under paralllelism
are resolved.
Parallel plans can't be used except for the case where the query will
run to completion. If portal execution were suspended, the parallel
mode restrictions would need to remain in effect during that time, but
that might make other queries fail. Therefore, this patch introduces
a framework that enables consideration of parallel plans only when it
is known that the plan will be run to completion. This probably needs
some refinement; for example, at bind time, we do not know whether a
query run via the extended protocol will be execution to completion or
run with a limited fetch count. Having the client indicate its
intentions at bind time would constitute a wire protocol break. Some
contexts in which parallel mode would be safe are not adjusted by this
patch; the default is not to try parallel plans except from call sites
that have been updated to say that such plans are OK.
This commit doesn't introduce any parallel paths or plans; it just
provides a way to determine whether they could potentially be used.
I'm committing it on the theory that the remaining parallel sequential
scan patches will also get committed to this release, hopefully in the
not-too-distant future.
Robert Haas and Amit Kapila. Reviewed (in earlier versions) by Noah
Misch.
To avoid confusion, rename CreatePolicyStmt's 'cmd' to 'cmd_name',
parse_policy_command's 'cmd' to 'polcmd', and AlterPolicy's 'cmd_datum'
to 'polcmd_datum', per discussion with Noah and as a follow-up to his
correction of copynodes/equalnodes handling of the CreatePolicyStmt
'cmd' field.
Back-patch to 9.5 where the CreatePolicyStmt was introduced, as we
are still only in alpha.
The allowed syntax for OVERLAPS, viz "row OVERLAPS row", is sufficiently
constrained that we don't actually need a precedence declaration for
OVERLAPS; indeed removing this declaration does not change the generated
gram.c file at all. Let's remove it to avoid confusion about whether
OVERLAPS has precedence or not. If we ever generalize what we allow for
OVERLAPS, we might need to put back a precedence declaration for it,
but we might want some other level than what it has today --- and leaving
the declaration there would just risk confusion about whether that would
be an incompatible change.
Likewise, remove OVERLAPS from the documentation's precedence table.
Per discussion with Noah Misch. Back-patch to 9.5 where we hacked up some
nearby precedence decisions.
The original implementation of TABLESAMPLE modeled the tablesample method
API on index access methods, which wasn't a good choice because, without
specialized DDL commands, there's no way to build an extension that can
implement a TSM. (Raw inserts into system catalogs are not an acceptable
thing to do, because we can't undo them during DROP EXTENSION, nor will
pg_upgrade behave sanely.) Instead adopt an API more like procedural
language handlers or foreign data wrappers, wherein the only SQL-level
support object needed is a single handler function identified by having
a special return type. This lets us get rid of the supporting catalog
altogether, so that no custom DDL support is needed for the feature.
Adjust the API so that it can support non-constant tablesample arguments
(the original coding assumed we could evaluate the argument expressions at
ExecInitSampleScan time, which is undesirable even if it weren't outright
unsafe), and discourage sampling methods from looking at invisible tuples.
Make sure that the BERNOULLI and SYSTEM methods are genuinely repeatable
within and across queries, as required by the SQL standard, and deal more
honestly with methods that can't support that requirement.
Make a full code-review pass over the tablesample additions, and fix
assorted bugs, omissions, infelicities, and cosmetic issues (such as
failure to put the added code stanzas in a consistent ordering).
Improve EXPLAIN's output of tablesample plans, too.
Back-patch to 9.5 so that we don't have to support the original API
in production.
Other options cannot be changed, as it's not totally clear if cached plans
would need to be invalidated if one of the other options change. Selectivity
estimator functions only change plan costs, not correctness of plans, so
those should be safe.
Original patch by Uriy Zhuravlev, heavily edited by me.
Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
The plain C string language name needs to be wrapped in makeString() so
that the parse tree is copyable. This is detectable by
-DCOPY_PARSE_PLAN_TREES. Add a test case for the COMMENT case.
Also make the quoting in the error messages more consistent.
discovered by Tom Lane
This SQL standard functionality allows to aggregate data by different
GROUP BY clauses at once. Each grouping set returns rows with columns
grouped by in other sets set to NULL.
This could previously be achieved by doing each grouping as a separate
query, conjoined by UNION ALLs. Besides being considerably more concise,
grouping sets will in many cases be faster, requiring only one scan over
the underlying data.
The current implementation of grouping sets only supports using sorting
for input. Individual sets that share a sort order are computed in one
pass. If there are sets that don't share a sort order, additional sort &
aggregation steps are performed. These additional passes are sourced by
the previous sort step; thus avoiding repeated scans of the source data.
The code is structured in a way that adding support for purely using
hash aggregation or a mix of hashing and sorting is possible. Sorting
was chosen to be supported first, as it is the most generic method of
implementation.
Instead of, as in an earlier versions of the patch, representing the
chain of sort and aggregation steps as full blown planner and executor
nodes, all but the first sort are performed inside the aggregation node
itself. This avoids the need to do some unusual gymnastics to handle
having to return aggregated and non-aggregated tuples from underlying
nodes, as well as having to shut down underlying nodes early to limit
memory usage. The optimizer still builds Sort/Agg node to describe each
phase, but they're not part of the plan tree, but instead additional
data for the aggregation node. They're a convenient and preexisting way
to describe aggregation and sorting. The first (and possibly only) sort
step is still performed as a separate execution step. That retains
similarity with existing group by plans, makes rescans fairly simple,
avoids very deep plans (leading to slow explains) and easily allows to
avoid the sorting step if the underlying data is sorted by other means.
A somewhat ugly side of this patch is having to deal with a grammar
ambiguity between the new CUBE keyword and the cube extension/functions
named cube (and rollup). To avoid breaking existing deployments of the
cube extension it has not been renamed, neither has cube been made a
reserved keyword. Instead precedence hacking is used to make GROUP BY
cube(..) refer to the CUBE grouping sets feature, and not the function
cube(). To actually group by a function cube(), unlikely as that might
be, the function name has to be quoted.
Needs a catversion bump because stored rules may change.
Author: Andrew Gierth and Atri Sharma, with contributions from Andres Freund
Reviewed-By: Andres Freund, Noah Misch, Tom Lane, Svenne Krap, Tomas
Vondra, Erik Rijkers, Marti Raudsepp, Pavel Stehule
Discussion: CAOeZVidmVRe2jU6aMk_5qkxnB7dfmPROzM7Ur8JPW5j8Y5X-Lw@mail.gmail.com
Add a TABLESAMPLE clause to SELECT statements that allows
user to specify random BERNOULLI sampling or block level
SYSTEM sampling. Implementation allows for extensible
sampling functions to be written, using a standard API.
Basic version follows SQLStandard exactly. Usable
concrete use cases for the sampling API follow in later
commits.
Petr Jelinek
Reviewed by Michael Paquier and Simon Riggs
When this option is specified, a progress report is printed as each index
is reindexed.
Per discussion, we agreed on the following syntax for the extensibility of
the options.
REINDEX (flexible options) { INDEX | ... } name
Sawada Masahiko.
Reviewed by Robert Haas, Fabrízio Mello, Alvaro Herrera, Kyotaro Horiguchi,
Jim Nasby and me.
Discussion: CAD21AoA0pK3YcOZAFzMae+2fcc3oGp5zoRggDyMNg5zoaWDhdQ@mail.gmail.com
This feature lets user code inspect and take action on DDL events.
Whenever a ddl_command_end event trigger is installed, DDL actions
executed are saved to a list which can be inspected during execution of
a function attached to ddl_command_end.
The set-returning function pg_event_trigger_ddl_commands can be used to
list actions so captured; it returns data about the type of command
executed, as well as the affected object. This is sufficient for many
uses of this feature. For the cases where it is not, we also provide a
"command" column of a new pseudo-type pg_ddl_command, which is a
pointer to a C structure that can be accessed by C code. The struct
contains all the info necessary to completely inspect and even
reconstruct the executed command.
There is no actual deparse code here; that's expected to come later.
What we have is enough infrastructure that the deparsing can be done in
an external extension. The intention is that we will add some deparsing
code in a later release, as an in-core extension.
A new test module is included. It's probably insufficient as is, but it
should be sufficient as a starting point for a more complete and
future-proof approach.
Authors: Álvaro Herrera, with some help from Andres Freund, Ian Barwick,
Abhijit Menon-Sen.
Reviews by Andres Freund, Robert Haas, Amit Kapila, Michael Paquier,
Craig Ringer, David Steele.
Additional input from Chris Browne, Dimitri Fontaine, Stephen Frost,
Petr Jelínek, Tom Lane, Jim Nasby, Steven Singer, Pavel Stěhule.
Based on original work by Dimitri Fontaine, though I didn't use his
code.
Discussion:
https://www.postgresql.org/message-id/m2txrsdzxa.fsf@2ndQuadrant.frhttps://www.postgresql.org/message-id/20131108153322.GU5809@eldon.alvh.no-ip.orghttps://www.postgresql.org/message-id/20150215044814.GL3391@alvh.no-ip.org
The newly added ON CONFLICT clause allows to specify an alternative to
raising a unique or exclusion constraint violation error when inserting.
ON CONFLICT refers to constraints that can either be specified using a
inference clause (by specifying the columns of a unique constraint) or
by naming a unique or exclusion constraint. DO NOTHING avoids the
constraint violation, without touching the pre-existing row. DO UPDATE
SET ... [WHERE ...] updates the pre-existing tuple, and has access to
both the tuple proposed for insertion and the existing tuple; the
optional WHERE clause can be used to prevent an update from being
executed. The UPDATE SET and WHERE clauses have access to the tuple
proposed for insertion using the "magic" EXCLUDED alias, and to the
pre-existing tuple using the table name or its alias.
This feature is often referred to as upsert.
This is implemented using a new infrastructure called "speculative
insertion". It is an optimistic variant of regular insertion that first
does a pre-check for existing tuples and then attempts an insert. If a
violating tuple was inserted concurrently, the speculatively inserted
tuple is deleted and a new attempt is made. If the pre-check finds a
matching tuple the alternative DO NOTHING or DO UPDATE action is taken.
If the insertion succeeds without detecting a conflict, the tuple is
deemed inserted.
To handle the possible ambiguity between the excluded alias and a table
named excluded, and for convenience with long relation names, INSERT
INTO now can alias its target table.
Bumps catversion as stored rules change.
Author: Peter Geoghegan, with significant contributions from Heikki
Linnakangas and Andres Freund. Testing infrastructure by Jeff Janes.
Reviewed-By: Heikki Linnakangas, Andres Freund, Robert Haas, Simon Riggs,
Dean Rasheed, Stephen Frost and many others.
In commit 31eae6028e, some documents were not updated to show the new
capability; fix that. Also, the error message you get when CURRENT_USER
and SESSION_USER are used in a context that doesn't accept them could be
clearer about it being a problem only in those contexts; so add the
word "here".
Author: Kyotaro HORIGUCHI
His patch submission also included changes to GRANT/REVOKE, but those
seemed more controversial, so I left them out. We can reconsider these
changes later.
This provides a mechanism for specifying conversions between SQL data
types and procedural languages. As examples, there are transforms
for hstore and ltree for PL/Perl and PL/Python.
reviews by Pavel Stěhule and Andres Freund
FORCE option has been marked "obsolete" since very old version 7.4
but existed for backwards compatibility. Per discussion on pgsql-hackers,
we concluded that it's no longer worth keeping supporting the option.
Foreign tables can now be inheritance children, or parents. Much of the
system was already ready for this, but we had to fix a few things of
course, mostly in the area of planner and executor handling of row locks.
As side effects of this, allow foreign tables to have NOT VALID CHECK
constraints (and hence to accept ALTER ... VALIDATE CONSTRAINT), and to
accept ALTER SET STORAGE and ALTER SET WITH/WITHOUT OIDS. Continuing to
disallow these things would've required bizarre and inconsistent special
cases in inheritance behavior. Since foreign tables don't enforce CHECK
constraints anyway, a NOT VALID one is a complete no-op, but that doesn't
mean we shouldn't allow it. And it's possible that some FDWs might have
use for SET STORAGE or SET WITH OIDS, though doubtless they will be no-ops
for most.
An additional change in support of this is that when a ModifyTable node
has multiple target tables, they will all now be explicitly identified
in EXPLAIN output, for example:
Update on pt1 (cost=0.00..321.05 rows=3541 width=46)
Update on pt1
Foreign Update on ft1
Foreign Update on ft2
Update on child3
-> Seq Scan on pt1 (cost=0.00..0.00 rows=1 width=46)
-> Foreign Scan on ft1 (cost=100.00..148.03 rows=1170 width=46)
-> Foreign Scan on ft2 (cost=100.00..148.03 rows=1170 width=46)
-> Seq Scan on child3 (cost=0.00..25.00 rows=1200 width=46)
This was done mainly to provide an unambiguous place to attach "Remote SQL"
fields, but it is useful for inherited updates even when no foreign tables
are involved.
Shigeru Hanada and Etsuro Fujita, reviewed by Ashutosh Bapat and Kyotaro
Horiguchi, some additional hacking by me
We were involving the parser too much in setting up initial vacuuming
parameters. This patch moves that responsibility elsewhere to simplify
code, and also to make future additions easier. To do this, create a
new struct VacuumParams which is filled just prior to vacuum execution,
instead of at parse time; for user-invoked vacuuming this is set up in a
new function ExecVacuum, while autovacuum sets it up by itself.
While at it, add a new member VACOPT_SKIPTOAST to enum VacuumOption,
only set by autovacuum, which is used to disable vacuuming of the toast
table instead of the old do_toast parameter; this relieves the argument
list of vacuum() and some callees a bit. This partially makes up for
having added more arguments in an effort to avoid having autovacuum from
constructing a VacuumStmt parse node.
Author: Michael Paquier. Some tweaks by Álvaro
Reviewed by: Robert Haas, Stephen Frost, Álvaro Herrera
In the spirit of 890192e99a and 4464303405f: have get_object_address
understand individual pg_amop and pg_amproc objects. There is no way to
refer to such objects directly in the grammar -- rather, they are almost
always considered an integral part of the opfamily that contains them.
(The only case that deals with them individually is ALTER OPERATOR
FAMILY ADD/DROP, which carries the opfamily address separately and thus
does not need it to be part of each added/dropped element's address.)
In event triggers it becomes possible to become involved with individual
amop/amproc elements, and this commit enables pg_get_object_address to
do so as well.
To make the overall coding simpler, this commit also slightly changes
the get_object_address representation for opclasses and opfamilies:
instead of having the AM name in the objargs array, I moved it as the
first element of the objnames array. This enables the new code to use
objargs for the type names used by pg_amop and pg_amproc.
Reviewed by: Stephen Frost
While the SQL standard is pretty vague on the overall topic of operator
precedence (because it never presents a unified BNF for all expressions),
it does seem reasonable to conclude from the spec for <boolean value
expression> that OR has the lowest precedence, then AND, then NOT, then IS
tests, then the six standard comparison operators, then everything else
(since any non-boolean operator in a WHERE clause would need to be an
argument of one of these).
We were only sort of on board with that: most notably, while "<" ">" and
"=" had properly low precedence, "<=" ">=" and "<>" were treated as generic
operators and so had significantly higher precedence. And "IS" tests were
even higher precedence than those, which is very clearly wrong per spec.
Another problem was that "foo NOT SOMETHING bar" constructs, such as
"x NOT LIKE y", were treated inconsistently because of a bison
implementation artifact: they had the documented precedence with respect
to operators to their right, but behaved like NOT (i.e., very low priority)
with respect to operators to their left.
Fixing the precedence issues is just a small matter of rearranging the
precedence declarations in gram.y, except for the NOT problem, which
requires adding an additional lookahead case in base_yylex() so that we
can attach a different token precedence to NOT LIKE and allied two-word
operators.
The bulk of this patch is not the bug fix per se, but adding logic to
parse_expr.c to allow giving warnings if an expression has changed meaning
because of these precedence changes. These warnings are off by default
and are enabled by the new GUC operator_precedence_warning. It's believed
that very few applications will be affected by these changes, but it was
agreed that a warning mechanism is essential to help debug any that are.
SQL has standardized on => as the use of to specify named parameters,
and we've wanted for many years to support the same syntax ourselves,
but this has been complicated by the possible use of => as an operator
name. In PostgreSQL 9.0, we began emitting a warning when an operator
named => was defined, and in PostgreSQL 9.2, we stopped shipping a
=>(text, text) operator as part of hstore. By the time the next major
version of PostgreSQL is released, => will have been deprecated for a
full five years, so hopefully there won't be too many people still
relying on it. We continue to support := for compatibility with
previous PostgreSQL releases.
Pavel Stehule, reviewed by Petr Jelinek, with a few documentation
tweaks by me.
Commands such as ALTER USER, ALTER GROUP, ALTER ROLE, GRANT, and the
various ALTER OBJECT / OWNER TO, as well as ad-hoc clauses related to
roles such as the AUTHORIZATION clause of CREATE SCHEMA, the FOR clause
of CREATE USER MAPPING, and the FOR ROLE clause of ALTER DEFAULT
PRIVILEGES can now take the keywords CURRENT_USER and SESSION_USER as
user specifiers in place of an explicit user name.
This commit also fixes some quite ugly handling of special standards-
mandated syntax in CREATE USER MAPPING, which in particular would fail
to work in presence of a role named "current_user".
The special role specifiers PUBLIC and NONE also have more consistent
handling now.
Also take the opportunity to add location tracking to user specifiers.
Authors: Kyotaro Horiguchi. Heavily reworked by Álvaro Herrera.
Reviewed by: Rushabh Lathia, Adam Brightwell, Marti Raudsepp.
There are a couple of places in our grammar that fail to be strict LALR(1),
by requiring more than a single token of lookahead to decide what to do.
Up to now we've dealt with that by using a filter between the lexer and
parser that merges adjacent tokens into one in the places where two tokens
of lookahead are necessary. But that creates a number of user-visible
anomalies, for instance that you can't name a CTE "ordinality" because
"WITH ordinality AS ..." triggers folding of WITH and ORDINALITY into one
token. I realized that there's a better way.
In this patch, we still do the lookahead basically as before, but we never
merge the second token into the first; we replace just the first token by
a special lookahead symbol when one of the lookahead pairs is seen.
This requires a couple extra productions in the grammar, but it involves
fewer special tokens, so that the grammar tables come out a bit smaller
than before. The filter logic is no slower than before, perhaps a bit
faster.
I also fixed the filter logic so that when backing up after a lookahead,
the current token's terminator is correctly restored; this eliminates some
weird behavior in error message issuance, as is shown by the one change in
existing regression test outputs.
I believe that this patch entirely eliminates odd behaviors caused by
lookahead for WITH. It doesn't really improve the situation for NULLS
followed by FIRST/LAST unfortunately: those sequences still act like a
reserved word, even though there are cases where they should be seen as two
ordinary identifiers, eg "SELECT nulls first FROM ...". I experimented
with additional grammar hacks but couldn't find any simple solution for
that. Still, this is better than before, and it seems much more likely
that we *could* somehow solve the NULLS case on the basis of this filter
behavior than the previous one.
Use a different A_Expr_Kind for LIKE/ILIKE/SIMILAR TO constructs, so that
they can be distinguished from direct invocation of the underlying
operators. Also, postpone selection of the operator name when transforming
"x IN (select)" to "x = ANY (select)", so that those syntaxes can be told
apart at parse analysis time.
I had originally thought I'd also have to do something special for the
syntaxes IS NOT DISTINCT FROM, IS NOT DOCUMENT, and x NOT IN (SELECT...),
which the grammar translates as though they were NOT (construct).
On reflection though, we can distinguish those cases reliably by noting
whether the parse location shown for the NOT is the same as for its child
node. This only requires tweaking the parse locations for NOT IN, which
I've done here.
These changes should have no effect outside the parser; they're just in
support of being able to give accurate warnings for planned operator
precedence changes.
We did not need a location tag on NullTest or BooleanTest before, because
no error messages referred directly to their locations. That's planned
to change though, so add these fields in a separate housekeeping commit.
Catversion bump because stored rules may change.
transformExpr() has for many years had provisions to do nothing when
applied to an already-transformed expression tree. However, this was
always ugly and of dubious reliability, so we'd be much better off without
it. The primary historical reason for it was that gram.y sometimes
returned multiple links to the same subexpression, which is no longer true
as of my BETWEEN fixes. We'd also grown some lazy hacks in CREATE TABLE
LIKE (failing to distinguish between raw and already-transformed index
specifications) and one or two other places.
This patch removes the need for and support for re-transforming already
transformed expressions. The index case is dealt with by adding a flag
to struct IndexStmt to indicate that it's already been transformed;
which has some benefit anyway in that tablecmds.c can now Assert that
transformation has happened rather than just assuming. The other main
reason was some rather sloppy code for array type coercion, which can
be fixed (and its performance improved too) by refactoring.
I did leave transformJoinUsingClause() still constructing expressions
containing untransformed operator nodes being applied to Vars, so that
transformExpr() still has to allow Var inputs. But that's a much narrower,
and safer, special case than before, since Vars will never appear in a raw
parse tree, and they don't have any substructure to worry about.
In passing fix some oversights in the patch that added CREATE INDEX
IF NOT EXISTS (missing processing of IndexStmt.if_not_exists). These
appear relatively harmless, but still sloppy coding practice.
Previously, gram.y itself converted BETWEEN into AND (or AND/OR) nests of
expression comparisons. This was always as bogus as could be, but fixing
it hasn't risen to the top of the to-do list. The present patch invents an
A_Expr representation for BETWEEN expressions, and does the expansion to
comparison trees in parse_expr.c which is at least a slightly saner place
to be doing semantic conversions. There should be no change in the post-
parse-analysis results.
This does nothing for the semantic issues with BETWEEN (dubious connection
to btree-opclass semantics, and multiple evaluation of possibly volatile
subexpressions) ... but it's a necessary preliminary step before we could
fix any of that. The main immediate benefit is that preserving BETWEEN as
an identifiable raw-parse-tree construct will enable better error messages.
While at it, fix the code so that multiply-referenced subexpressions are
physically duplicated before being passed through transformExpr(). This
gets rid of one of the principal reasons why transformExpr() has
historically had to allow already-processed input.
Commit 3f88672a4 neglected to update the AlterExtensionContentsStmt
production in the grammar to use TypeName to represent types when
passing objects to get_object_address.
Reported as a pg_upgrade failure by Jeff Janes.
In COMMENT, DROP, SECURITY LABEL, and the new pg_get_object_address
function, we were representing types as a list of names, same as other
objects; but types are special objects that require their own
representation to be totally accurate. In the original COMMENT code we
had a note about fixing it which was lost in the course of c10575ff00.
Change all those places to use TypeName instead, as suggested by that
comment.
Right now the original coding doesn't cause any bugs, so no backpatch.
It is more problematic for proposed future code that operate with object
addresses from the SQL interface; type details such as array-ness are
lost when working with the degraded representation.
Thanks to Petr Jelínek and Dimitri Fontaine for offlist help on finding
a solution to a shift/reduce grammar conflict.
Apart from enabling comments on domain constraints, this enables a
future project to replicate object dropping to remote servers: with the
current mechanism there's no way to distinguish between the two types of
constraints, so there's no way to know what to drop.
Also added support for the domain constraint comments in psql's \dd and
pg_dump.
Catalog version bumped due to the change in ObjectType enum.
As pointed out by Robert, we should really have named pg_rowsecurity
pg_policy, as the objects stored in that catalog are policies. This
patch fixes that and updates the column names to start with 'pol' to
match the new catalog name.
The security consideration for COPY with row level security, also
pointed out by Robert, has also been addressed by remembering and
re-checking the OID of the relation initially referenced during COPY
processing, to make sure it hasn't changed under us by the time we
finish planning out the query which has been built.
Robert and Alvaro also commented on missing OCLASS and OBJECT entries
for POLICY (formerly ROWSECURITY or POLICY, depending) in various
places. This patch fixes that too, which also happens to add the
ability to COMMENT on policies.
In passing, attempt to improve the consistency of messages, comments,
and documentation as well. This removes various incarnations of
'row-security', 'row-level security', 'Row-security', etc, in favor
of 'policy', 'row level security' or 'row_security' as appropriate.
Happy Thanksgiving!
interval precision can only be specified after the "interval" keyword if
no units are specified.
Previously we incorrectly checked the units to see if the precision was
legal, causing confusion.
Report by Alvaro Herrera
This clause changes the behavior of SELECT locking clauses in the
presence of locked rows: instead of causing a process to block waiting
for the locks held by other processes (or raise an error, with NOWAIT),
SKIP LOCKED makes the new reader skip over such rows. While this is not
appropriate behavior for general purposes, there are some cases in which
it is useful, such as queue-like tables.
Catalog version bumped because this patch changes the representation of
stored rules.
Reviewed by Craig Ringer (based on a previous attempt at an
implementation by Simon Riggs, who also provided input on the syntax
used in the current patch), David Rowley, and Álvaro Herrera.
Author: Thomas Munro
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
This patch allows us to execute ALTER SYSTEM RESET command to
remove the configuration entry from postgresql.auto.conf.
Vik Fearing, reviewed by Amit Kapila and me.
This enables changing permanent (logged) tables to unlogged and
vice-versa.
(Docs for ALTER TABLE / SET TABLESPACE got shuffled in an order that
hopefully makes more sense than the original.)
Author: Fabrízio de Royes Mello
Reviewed by: Christoph Berg, Andres Freund, Thom Brown
Some tweaking by Álvaro Herrera
As 'ALTER TABLESPACE .. MOVE ALL' really didn't change the tablespace
but instead changed objects inside tablespaces, it made sense to
rework the syntax and supporting functions to operate under the
'ALTER (TABLE|INDEX|MATERIALIZED VIEW)' syntax and to be in
tablecmds.c.
Pointed out by Alvaro, who also suggested the new syntax.
Back-patch to 9.4.
This command provides an automated way to create foreign table definitions
that match remote tables, thereby reducing tedium and chances for error.
In this patch, we provide the necessary core-server infrastructure and
implement the feature fully in the postgres_fdw foreign-data wrapper.
Other wrappers will throw a "feature not supported" error until/unless
they are updated.
Ronan Dunklau and Michael Paquier, additional work by me
Most of the existing option names are keywords anyway, but we can get rid
of LC_COLLATE and LC_CTYPE as keywords known to the lexer/grammar. This
immediately reduces the size of the grammar tables by about 8KB, and will
save more when we add additional CREATE/ALTER DATABASE options in future.
A side effect of the implementation is that the CONNECTION LIMIT option
can now also be spelled CONNECTION_LIMIT. We choose not to document this,
however.
Vik Fearing, based on a suggestion by me; reviewed by Pavel Stehule
This SQL-standard feature allows a sub-SELECT yielding multiple columns
(but only one row) to be used to compute the new values of several columns
to be updated. While the same results can be had with an independent
sub-SELECT per column, such a workaround can require a great deal of
duplicated computation.
The standard actually says that the source for a multi-column assignment
could be any row-valued expression. The implementation used here is
tightly tied to our existing sub-SELECT support and can't handle other
cases; the Bison grammar would have some issues with them too. However,
I don't feel too bad about this since other cases can be converted into
sub-SELECTs. For instance, "SET (a,b,c) = row_valued_function(x)" could
be written "SET (a,b,c) = (SELECT * FROM row_valued_function(x))".
Since most of the system thinks AND and OR are N-argument expressions
anyway, let's have the grammar generate a representation of that form when
dealing with input like "x AND y AND z AND ...", rather than generating
a deeply-nested binary tree that just has to be flattened later by the
planner. This avoids stack overflow in parse analysis when dealing with
queries having more than a few thousand such clauses; and in any case it
removes some rather unsightly inconsistencies, since some parts of parse
analysis were generating N-argument ANDs/ORs already.
It's still possible to get a stack overflow with weirdly parenthesized
input, such as "x AND (y AND (z AND ( ... )))", but such cases are not
mainstream usage. The maximum depth of parenthesization is already
limited by Bison's stack in such cases, anyway, so that the limit is
probably fairly platform-independent.
Patch originally by Gurjeet Singh, heavily revised by me
This reverts commit 45b7abe59e.
It turns out that the %name-prefix syntax without "=" does not work
at all in pre-2.4 Bison. We are not prepared to make such a large
jump in minimum required Bison version just to suppress a warning
message in a version hardly any developers are using yet.
When 3.0 gets more popular, we'll figure out a way to deal with this.
In the meantime, BISONFLAGS=-Wno-deprecated is recommendable for
anyone using 3.0 who doesn't want to see the warning.
%name-prefix doesn't use an "=" sign according to the Bison docs, but it
silently accepted one anyway, until Bison 3.0. This was originally a
typo of mine in commit 012abebab1, and we
seem to have slavishly copied the error into all the other grammar files.
Per report from Vik Fearing; analysis by Peter Eisentraut.
Back-patch to all active branches, since somebody might try to build
a back branch with up-to-date tools.
Given that ALTER TABLESPACE has moved on from just existing for
general purpose rename/owner changes, it deserves its own top-level
production in the grammar. This also cleans up the RenameStmt to
only ever be used for actual RENAMEs again- it really wasn't
appropriate to hide non-RENAME productions under there.
Noted by Alvaro.
This forces an input field containing the quoted null string to be
returned as a NULL. Without this option, only unquoted null strings
behave this way. This helps where some CSV producers insist on quoting
every field, whether or not it is needed. The option takes a list of
fields, and only applies to those columns. There is an equivalent
column-level option added to file_fdw.
Ian Barwick, with some tweaking by Andrew Dunstan, reviewed by Payal
Singh.
The SQL standard says that OVERLAPS should have a two-element row
constructor on each side. The original coding of OVERLAPS support in
our grammar attempted to extend that by allowing a single-element row
constructor, which it internally duplicated ... or tried to, anyway.
But that code has certainly not worked since our List infrastructure was
rewritten in 2004, and I'm none too sure it worked before that. As it
stands, it ends up building a List that includes itself, leading to
assorted undesirable behaviors later in the parser.
Even if it worked as intended, it'd be a bit evil because of the
possibility of duplicate evaluation of a volatile function that the user
had written only once. Given the lack of documentation, test cases, or
complaints, let's just get rid of the idea and only support the standard
syntax.
While we're at it, improve the error cursor positioning for the
wrong-number-of-arguments errors, and inline the makeOverlaps() function
since it's only called in one place anyway.
Per bug #9227 from Joshua Yanovski. Initial patch by Joshua Yanovski,
extended a bit by me.
Previously we were piggybacking on transaction ID parameters to freeze
multixacts; but since there isn't necessarily any relationship between
rates of Xid and multixact consumption, this turns out not to be a good
idea.
Therefore, we now have multixact-specific freezing parameters:
vacuum_multixact_freeze_min_age: when to remove multis as we come across
them in vacuum (default to 5 million, i.e. early in comparison to Xid's
default of 50 million)
vacuum_multixact_freeze_table_age: when to force whole-table scans
instead of scanning only the pages marked as not all visible in
visibility map (default to 150 million, same as for Xids). Whichever of
both which reaches the 150 million mark earlier will cause a whole-table
scan.
autovacuum_multixact_freeze_max_age: when for cause emergency,
uninterruptible whole-table scans (default to 400 million, double as
that for Xids). This means there shouldn't be more frequent emergency
vacuuming than previously, unless multixacts are being used very
rapidly.
Backpatch to 9.3 where multixacts were made to persist enough to require
freezing. To avoid an ABI break in 9.3, VacuumStmt has a couple of
fields in an unnatural place, and StdRdOptions is split in two so that
the newly added fields can go at the end.
Patch by me, reviewed by Robert Haas, with additional input from Andres
Freund and Tom Lane.
Add the ability to specify the objects to move by who those objects are
owned by (as relowner) and change ALL to mean ALL objects. This
makes the command always operate against a well-defined set of objects
and not have the objects-to-be-moved based on the role of the user
running the command.
Per discussion with Simon and Tom.
A while back, 2c92edad48 allowed
type_func_name_keywords to be used in more places, including role
identifiers. Unfortunately, that commit missed out on cases where
name_list was used for lists-of-roles, eg: for DROP ROLE. This
resulted in the unfortunate situation that you could CREATE a role
with a type_func_name_keywords-allowed identifier, but not DROP it
(directly- ALTER could be used to rename it to something which
could be DROP'd).
This extends allowing type_func_name_keywords to places where role
lists can be used.
Back-patch to 9.0, as 2c92edad48 was.
All these constructs generate parse trees consisting of a Const and
a run-time type coercion (perhaps a FuncExpr or a CoerceViaIO). Modify
the raw parse output so that we end up with the original token's location
attached to the type coercion node while the Const has location -1;
before, it was the other way around. This makes no difference in terms
of what exprLocation() will say about the parse tree as a whole, so it
should not have any user-visible impact. The point of changing it is that
we do not want contrib/pg_stat_statements to treat these constructs as
replaceable constants. It will do the right thing if the Const has
location -1 rather than a valid location.
This is a pretty ugly hack, but then this code is ugly already; we should
someday replace this translation with special-purpose parse node(s) that
would allow ruleutils.c to reconstruct the original query text.
(See also commit 5d3fcc4c2e, which also
hacked location assignment rules for the benefit of pg_stat_statements.)
Back-patch to 9.2 where pg_stat_statements grew the ability to recognize
replaceable constants.
Kyotaro Horiguchi
Tablespaces have a few options which can be set on them to give PG hints
as to how the tablespace behaves (perhaps it's faster for sequential
scans, or better able to handle random access, etc). These options were
only available through the ALTER TABLESPACE command.
This adds the ability to set these options at CREATE TABLESPACE time,
removing the need to do both a CREATE TABLESPACE and ALTER TABLESPACE to
get the correct options set on the tablespace.
Vik Fearing, reviewed by Michael Paquier.
This adds a 'MOVE' sub-command to ALTER TABLESPACE which allows moving sets of
objects from one tablespace to another. This can be extremely handy and avoids
a lot of error-prone scripting. ALTER TABLESPACE ... MOVE will only move
objects the user owns, will notify the user if no objects were found, and can
be used to move ALL objects or specific types of objects (TABLES, INDEXES, or
MATERIALIZED VIEWS).
Overly compact coding in makeOrderedSetArgs() led to a platform dependency:
if the compiler chose to execute the subexpressions in the wrong order,
list_length() might get applied to an already-modified List, giving a
value we didn't want. Per buildfarm.
This patch introduces generic support for ordered-set and hypothetical-set
aggregate functions, as well as implementations of the instances defined in
SQL:2008 (percentile_cont(), percentile_disc(), rank(), dense_rank(),
percent_rank(), cume_dist()). We also added mode() though it is not in the
spec, as well as versions of percentile_cont() and percentile_disc() that
can compute multiple percentile values in one pass over the data.
Unlike the original submission, this patch puts full control of the sorting
process in the hands of the aggregate's support functions. To allow the
support functions to find out how they're supposed to sort, a new API
function AggGetAggref() is added to nodeAgg.c. This allows retrieval of
the aggregate call's Aggref node, which may have other uses beyond the
immediate need. There is also support for ordered-set aggregates to
install cleanup callback functions, so that they can be sure that
infrastructure such as tuplesort objects gets cleaned up.
In passing, make some fixes in the recently-added support for variadic
aggregates, and make some editorial adjustments in the recent FILTER
additions for aggregates. Also, simplify use of IsBinaryCoercible() by
allowing it to succeed whenever the target type is ANY or ANYELEMENT.
It was inconsistent that it dealt with other polymorphic target types
but not these.
Atri Sharma and Andrew Gierth; reviewed by Pavel Stehule and Vik Fearing,
and rather heavily editorialized upon by Tom Lane
Tom Lane
Robert Haas
Stephen Frost
Peter Eisentraut
Kevin Grittner
Alvaro Herrera
Teodor Sigaev
Bruce Momjian
Andres Freund
Andrew Dunstan
Heikki Linnakangas
Simon Riggs
Fujii Masao
Tatsuo Ishii