We previously thought that allowing such cases can confuse users when they
specify DROP TABLES IN SCHEMA but that doesn't seem to be the case based
on discussion. This helps to uplift the restriction during
ALTER TABLE ... SET SCHEMA which used to ensure that we couldn't end up
with a publication having both a schema and the same schema's table.
To allow this, we need to forbid having any schema on a publication if
column lists on a table are specified (and vice versa). This is because
otherwise we still need a restriction during ALTER TABLE ... SET SCHEMA to
forbid cases where it could lead to a publication having both a schema and
the same schema's table with column list.
Based on suggestions by Peter Eisentraut.
Author: Hou Zhijie and Vignesh C
Reviewed-By: Peter Smith, Amit Kapila
Backpatch-through: 15, where it was introduced
Discussion: https://postgr.es/m/2729c9e2-9aac-8cda-f2f4-34f2bcc18f4e@enterprisedb.com
The pg_dump and pg_dumpall man pages referred to app-psql-patterns
as appearing "below", which I suspect was copied-and-pasted from
equivalent text in psql-ref.sgml rather than being actually thought
through. At least to me, that phrasing means "later in this same
web page/section", which this link target is not. Drop the
misleading and unnecessary-in-any-case adjective.
This may be a bit too subtle, but removing that word from there makes
this clause no longer a perfect parallel of the GRANT variant "ALL
TABLES IN SCHEMA": indeed, for publications what we record is the schema
itself, not the tables therein, which means that any tables added to the
schema in the future are also published. This is completely different
to what GRANT does, which is affect only the tables that exist when the
command is executed.
There isn't resounding support for this change, but there are a few
positive votes and no opposition. Because the time to 15 RC1 is very
short, let's get this out now.
Backpatch to 15.
Discussion: https://postgr.es/m/2729c9e2-9aac-8cda-f2f4-34f2bcc18f4e
Commit 5ef1eefd76, which added
archive_library, purged most mentions of archive_command from the
documentation. This is inappropriate, since archive_command is still
a feature in use and users will want to see information about it.
This restores all the removed mentions and rephrases things so that
archive_command and archive_library are presented as alternatives of
each other.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/9366d634-a917-85a9-4991-b2a4859edaf9@enterprisedb.com
The bounds hardcoded in compression.c since ffd5365 (minimum at 1 and
maximum at 22) do not match the reality of what zstd is able to
handle, these values being available via ZSTD_maxCLevel() and
ZSTD_minCLevel() at run-time. The maximum of 22 is actually correct
in recent versions, but the minimum was not as the library can go down
to -131720 by design. This commit changes the code to use the run-time
values in the code instead of some hardcoded ones.
Zstd seems to assume that these bounds could change in the future, and
Postgres will be able to adapt automatically to such changes thanks to
what's being done in this commit.
Reported-by: Justin Prysby
Discussion: https://postgr.es/m/20220922033716.GL31833@telsasoft.com
Backpatch-through: 15
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
The parameter controlling if two-phase transactions can be decoded was
named "two_phase" in the documentation while its procedure defines
"twophase".
Author: Florin Irion
Discussion: https://postgr.es/m/5eeabd10-1aff-ea61-f92d-9fa0d9a7e207@gmail.com
Backpatch-through: 14
Check in CREATE DATABASE and initdb that the selected encoding is
supported by ICU. Before, they would pass but users would later get
an error from the server when they tried to use the database.
Also document that initdb sets the encoding to UTF8 by default if the
ICU locale provider is chosen.
Author: Marina Polyakova <m.polyakova@postgrespro.ru>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/6dd6db0984d86a51b7255ba79f111971@postgrespro.ru
There was a excessive structure, leading to somewhat disorganized
presentation of the information. Remove a few tags and reorder
paragraphs to make the text flow more easily. Also, reword some of it
to be more concise.
The bit about column list combination is not modified, other than to
remove an uninteresting (and IMO confusing and wrong) paragraph; I
intend to deal with it differently afterwards.
Backpatch to 15.
Discussion: https://postgr.es/m/20220913121138.yn7ekkfysxzhkm2u@alvherre.pgsql
Referring to the WAL as just "log" invites confusion with the
postmaster log, so avoid doing that in docs and error messages.
Also shorten "WAL segment file" to just "WAL file" in various
places.
Bharath Rupireddy, reviewed by Nathan Bossart and Kyotaro Horiguchi
Discussion: https://postgr.es/m/CALj2ACUeXa8tDPaiTLexBDMZ7hgvaN+RTb957-cn5qwv9zf-MQ@mail.gmail.com
Before, each documentation target that built something from
postgres.sgml ran xmllint first to validate the input. Here, we
change it so that the validation only runs once and produces an output
file, and all the other targets build from that output file. This
avoids redundant work when building multiple documentation targets
(such as html and man).
Also, when we run xmllint, we can resolve entities (included files).
This helps with tools that don't support vpath builds, such as
dbtoepub.
All this also organizes the make targets a bit better for implementing
equivalent steps in meson.
Discussion: https://www.postgresql.org/message-id/e3ae16de-c9f9-f559-2d11-70b1342ae3d1@enterprisedb.com
In pg_receivewal, compressed output is only flushed on clean exits. The
reason to support SIGTERM as well as SIGINT (which is currently handled)
is that pg_receivewal might well be running as a daemon, and systemd's
default KillSignal is SIGTERM.
Since pg_recvlogical is also supposed to run as a daemon, teach it about
SIGTERM as well and update the documentation to match. While in there,
change pg_receivewal's time_to_stop to be sig_atomic_t like it is in
pg_recvlogical.
Author: Christoph Berg <myon@debian.org>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/Yvo/5No5S0c4EFMj@msg.df7cb.de
The oldest vendor-shipped Perl in the buildfarm is 5.14.2, which is
the last version that Debian Wheezy shipped. That OS is EOL, but we
keep it running because there is no other convenient way to test certain
non-mainstream 32-bit platforms. There is no bugfix in the 5.14.2 release
that is required, and yet it's also not the latest minor release --
that would be 5.14.4. To clarify the situation, we have thus arranged the
buildfarm to test 5.14.0. That allows configure scripts and documentation
to state 5.14 without fine print.
The MSVC build didn't check the version, since our previous minimum 5.8.3
was considered too old to check for on Windows. We will need a check for
Windows sometime during the v16 cycle, but that could be rendered moot
by the impending Meson conversion, so it seems safe to just document
the requirement for now.
Reviewed by Tom Lane
Discussion: https://www.postgresql.org/message-id/20220902181553.ev4pgzhubhdkguuv@awork3.anarazel.de
PG_COMPRESSION_OPTION_LEVEL is removed from the compression
specification logic, and instead the compression level is always
assigned with each library's default if nothing is directly given. This
centralizes the checks on the compression methods supported by a given
build, and always assigns a default compression level when parsing a
compression specification. This results in complaining at an earlier
stage than previously if a build supports a compression method or not,
aka when parsing a specification in the backend or the frontend, and not
when processing it. zstd, lz4 and zlib are able to handle in their
respective routines setting up the compression level the case of a
default value, hence the backend or frontend code (pg_receivewal or
pg_basebackup) has now no need to know what the default compression
level should be if nothing is specified: the logic is now done so as the
specification parsing assigns it. It can also be enforced by passing
down a "level" set to the default value, that the backend will accept
(the replication protocol is for example able to handle a command like
BASE_BACKUP (COMPRESSION_DETAIL 'gzip:level=-1')).
This code simplification fixes an issue with pg_basebackup --gzip
introduced by ffd5365, where the tarball of the streamed WAL segments
would be created as of pg_wal.tar.gz with uncompressed contents, while
the intention is to compress the segments with gzip at a default level.
The origin of the confusion comes from the handling of the default
compression level of gzip (-1 or Z_DEFAULT_COMPRESSION) and the value of
0 was getting assigned, which is what walmethods.c would consider
as equivalent to no compression when streaming WAL segments with its tar
methods. Assigning always the compression level removes the confusion
of some code paths considering a value of 0 set in a specification as
either no compression or a default compression level.
Note that 010_pg_basebackup.pl has to be adjusted to skip a few tests
where the shape of the compression detail string for client and
server-side compression was checked using gzip. This is a result of the
code simplification, as gzip specifications cannot be used if a build
does not support it.
Reported-by: Tom Lane
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/1400032.1662217889@sss.pgh.pa.us
Backpatch-through: 15
Locale options can be specified for initdb, createdb, and CREATE
DATABASE. In initdb, it has always been possible to specify --locale
and then some --lc-* option to override a category. CREATE DATABASE
and createdb didn't allow that, requiring either the all-categories
option or only per-category options. In
f2553d4306, this was changed in CREATE
DATABASE (perhaps by accident?) to be more like the initdb behavior,
but createdb still had the old behavior.
Now we change createdb to match the behavior of CREATE DATABASE and
initdb, and also update the documentation of CREATE DATABASE to match
the new behavior, which was not done in the above commit.
Author: Marina Polyakova <m.polyakova@postgrespro.ru>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://www.postgresql.org/message-id/7c99c132dc9c0ac630e0127f032ac480@postgrespro.ru
pg_walinspect uses datatype double (double precision floating point
number) for WAL stats percentile calculations and expose them via
float4 (single precision floating point number), which an unnecessary
loss of precision and confusing. Even though, it's harmless that way,
let's use float8 (double precision floating-point number) to be in
sync with what pg_walinspect does internally and what it exposes to
the users. This seems to be the pattern used elsewhere in the code.
Reported-by: Peter Eisentraut
Author: Bharath Rupireddy
Reviewed-by: Peter Eisentraut
Discussion: https://www.postgresql.org/message-id/36ee692b-232f-0484-ce94-dc39d82021ad%40enterprisedb.com
Be more clear about when and how an extension-defined GUC comes to be
visible in pg_settings. (Move the para to the bottom of the page, too;
whoever thought this point was more important than the para about the
view being updatable had odd priorities IMNSHO.)
Back-patch to v15 where archive modules were added, since that seems
to have made this more of a sore spot than it was before.
Benoit Lobréau, Nathan Bossart
Discussion: https://postgr.es/m/CAPE8EZ7KHaXMHKwT=HOim23tDVKYA1PruRuTfeYdCrYWwPGhag@mail.gmail.com
Remove no-longer-accurate claim that Windows lacks home directories.
Clarify the text by more clearly distinguishing which statements
reflect hard-wired choices versus which ones reflect overridable
defaults. Update the examples of version-specific file names,
and make them track future version changes by using "&majorversion;"
and "&version;". (BTW, in devel and beta releases this method
correctly says that you can use strings like "16devel" and "15beta4"
as minor version identifiers.)
Back-patch to v15, but not further, with the thought that in older
releases the examples with three-part version numbers still had
some historical relevance. v15 will be the first major release after
the last 9.x branch went out of support.
Robert Treat and Tom Lane, reviewed by Julien Rouhaud
Discussion: https://postgr.es/m/CAJSLCQ07F-WCYYYOY8+dWhHcVeJ1Pb01cWc-c0Hu=M3EjKT2Eg@mail.gmail.com
When using the BSD UUID functions, contrib/uuid-ossp expects
uuid_create() to produce a version-1 UUID. FreeBSD still does so,
but in recent NetBSD releases that function produces a version-4
(random) UUID instead. That's not acceptable for our purposes:
if the user wanted v4 she would have asked for v4, not v1.
Hence, check the version digit and complain if it's not '1'.
Also drop the documentation's claim that the NetBSD implementation
is usable. It might be, depending on which OS version you're using,
but we're not going to get into that kind of detail.
(Maybe someday we should ditch all these external libraries
and just write our own UUID code, but today is not that day.)
Nazir Bilal Yavuz, with cosmetic adjustments and docs by me.
Backpatch to all supported versions.
Discussion: https://postgr.es/m/3848059.1661038772@sss.pgh.pa.us
Discussion: https://postgr.es/m/17358-89806e7420797025@postgresql.org
In commit 3d895bc846 I introduced a bogus semicolon mid-statement by
careless cut-n-paste; move it. This had already been reported by Justin
Pryzby.
Also, change the styling a bit by avoiding names in CamelCase. This is
more consistent with the style we use elsewhere.
Backpatch to 15.
Author: Vitaly Burovoy <vitaly.burovoy@gmail.com>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Discussion: https://postgr.es/m/9afe5766-5a61-7860-598c-136867fad065@gmail.com
Discussion: https://postgr.es/m/20220819133016.GV26426@telsasoft.com
Since the retirement of some older buildfarm members, the oldest Bison
that gets regular testing is 2.3. MacOS ships that version, and will
continue doing so for the forseeable future because of Apple's policy
regarding GPLv3. While Mac users could use a package manager to install
a newer version, there is no compelling reason to force them do so at
this time.
Reviewed by Andres Freund
Discussion: https://www.postgresql.org/message-id/1097762.1662145681@sss.pgh.pa.us
This commit raises a warning message for a combination of options
('copy_data = true' and 'origin = none') during CREATE/ALTER subscription
operations if the publication tables were also replicated from other
publishers.
During replication, we can skip the data from other origins as we have that
information in WAL but that is not possible during initial sync so we raise
a warning if there is such a possibility.
Author: Vignesh C
Reviewed-By: Peter Smith, Amit Kapila, Jonathan Katz, Shi yu, Wang wei
Discussion: https://www.postgresql.org/message-id/CALDaNm0gwjY_4HFxvvty01BOT01q_fJLKQ3pWP9=9orqubhjcQ@mail.gmail.com
Add a new logical replication section for "Column Lists" (analogous to the
Row Filters page). This explains how the feature can be used and the
caveats in it.
Author: Peter Smith
Reviewed-by: Shi yu, Vignesh C, Erik Rijkers, Amit Kapila
Backpatch-through: 15, where it was introduced
Discussion: https://postgr.es/m/CAHut+PvOuc9=_4TbASc5=VUqh16UWtFO3GzcKQK_5m1hrW3vqg@mail.gmail.com
Improve documentation regarding the limitations of unique and primary key
constraints on partitioned tables. The existing documentation didn't make
it clear that the constraint columns had to be present in the partition
key as bare columns. The reader could be led to believe that it was ok to
include the constraint columns as part of a function call's parameters or
as part of an expression. Additionally, the documentation didn't mention
anything about the fact that we disallow unique and primary key
constraints if the partition keys contain *any* function calls or
expressions, regardless of if the constraint columns appear as columns
elsewhere in the partition key.
The confusion here was highlighted by a report on the general mailing list
by James Vanns.
Discussion: https://postgr.es/m/CAH7vdhNF0EdYZz3GLpgE3RSJLwWLhEk7A_fiKS9dPBT3Dz_3eA@mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvoU-u9iTqKjteYRFfi+UNEk7dbSAcyxEQD==vZt9B1KnA@mail.gmail.com
Reviewed-by: Erik Rijkers
Backpatch-through: 11
It was not strictly correct to say that a column list must always include
replica identity columns because that is true for only updates and
deletes.
Author: Peter Smith
Reviwed-by: Vignesh C, Amit Kapila
Backpatch-through: 15, where it was introduced
Discussion: https://postgr.es/m/CAHut+PvOuc9=_4TbASc5=VUqh16UWtFO3GzcKQK_5m1hrW3vqg@mail.gmail.com
The reverts the following and makes some associated cleanups:
commit f79b803dc: Common SQL/JSON clauses
commit f4fb45d15: SQL/JSON constructors
commit 5f0adec25: Make STRING an unreserved_keyword.
commit 33a377608: IS JSON predicate
commit 1a36bc9db: SQL/JSON query functions
commit 606948b05: SQL JSON functions
commit 49082c2cc: RETURNING clause for JSON() and JSON_SCALAR()
commit 4e34747c8: JSON_TABLE
commit fadb48b00: PLAN clauses for JSON_TABLE
commit 2ef6f11b0: Reduce running time of jsonb_sqljson test
commit 14d3f24fa: Further improve jsonb_sqljson parallel test
commit a6baa4bad: Documentation for SQL/JSON features
commit b46bcf7a4: Improve readability of SQL/JSON documentation.
commit 112fdb352: Fix finalization for json_objectagg and friends
commit fcdb35c32: Fix transformJsonBehavior
commit 4cd8717af: Improve a couple of sql/json error messages
commit f7a605f63: Small cleanups in SQL/JSON code
commit 9c3d25e17: Fix JSON_OBJECTAGG uniquefying bug
commit a79153b7a: Claim SQL standard compliance for SQL/JSON features
commit a1e7616d6: Rework SQL/JSON documentation
commit 8d9f9634e: Fix errors in copyfuncs/equalfuncs support for JSON node types.
commit 3c633f32b: Only allow returning string types or bytea from json_serialize
commit 67b26703b: expression eval: Fix EEOP_JSON_CONSTRUCTOR and EEOP_JSONEXPR size.
The release notes are also adjusted.
Backpatch to release 15.
Discussion: https://postgr.es/m/40d2c882-bcac-19a9-754d-4299e1d87ac7@postgresql.org
SUSv3 <netinet/in.h> defines struct sockaddr_in6, and all targeted Unix
systems have it. Windows has it in <ws2ipdef.h>. Remove the configure
probe, the macro and a small amount of dead code.
Also remove a mention of IPv6-less builds from the documentation, since
there aren't any.
This is similar to commits f5580882 and 077bf2f2 for Unix sockets. Even
though AF_INET6 is an "optional" component of SUSv3, there are no known
modern operating system without it, and it seems even less likely to be
omitted from future systems than AF_UNIX.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGKErNfhmvb_H0UprEmp4LPzGN06yR2_0tYikjzB-2ECMw@mail.gmail.com
The GRANT statement can now specify WITH INHERIT TRUE or WITH
INHERIT FALSE to control whether the member inherits the granted
role's permissions. For symmetry, you can now likewise write
WITH ADMIN TRUE or WITH ADMIN FALSE to turn ADMIN OPTION on or off.
If a GRANT does not specify WITH INHERIT, the behavior based on
whether the member role is marked INHERIT or NOINHERIT. This means
that if all roles are marked INHERIT or NOINHERIT before any role
grants are performed, the behavior is identical to what we had before;
otherwise, it's different, because ALTER ROLE [NO]INHERIT now only
changes the default behavior of future grants, and has no effect on
existing ones.
Patch by me. Reviewed and testing by Nathan Bossart and Tushar Ahuja,
with design-level comments from various others.
Discussion: http://postgr.es/m/CA+Tgmoa5Sf4PiWrfxA=sGzDKg0Ojo3dADw=wAHOhR9dggV=RmQ@mail.gmail.com
On fast machines, it's possible for applications such as pgbench
to issue connection requests so quickly that the postmaster's
listen queue overflows in the kernel, resulting in unexpected
failures (with not-very-helpful error messages). Most modern OSes
allow the queue size to be increased, so document how to do that.
Per report from Kevin McKibbin.
Discussion: https://postgr.es/m/CADc_NKg2d+oZY9mg4DdQdoUcGzN2kOYXBu-3--RW_hEe0tUV=g@mail.gmail.com
sysctl is more portable than Linux's /proc/sys file tree, and
often easier to use too. That's why most of our docs refer to
sysctl when talking about how to adjust kernel parameters.
Bring the few stragglers into line.
Discussion: https://postgr.es/m/361175.1661187463@sss.pgh.pa.us
Previously, membership of role A in role B could be recorded in the
catalog tables only once. This meant that a new grant of role A to
role B would overwrite the previous grant. For other object types, a
new grant of permission on an object - in this case role A - exists
along side the existing grant provided that the grantor is different.
Either grant can be revoked independently of the other, and
permissions remain so long as at least one grant remains. Make role
grants work similarly.
Previously, when granting membership in a role, the superuser could
specify any role whatsoever as the grantor, but for other object types,
the grantor of record must be either the owner of the object, or a
role that currently has privileges to perform a similar GRANT.
Implement the same scheme for role grants, treating the bootstrap
superuser as the role owner since roles do not have owners. This means
that attempting to revoke a grant, or admin option on a grant, can now
fail if there are dependent privileges, and that CASCADE can be used
to revoke these. It also means that you can't grant ADMIN OPTION on
a role back to a user who granted it directly or indirectly to you,
similar to how you can't give WITH GRANT OPTION on a privilege back
to a role which granted it directly or indirectly to you.
Previously, only the superuser could specify GRANTED BY with a user
other than the current user. Relax that rule to allow the grantor
to be any role whose privileges the current user posseses. This
doesn't improve compatibility with what we do for other object types,
where support for GRANTED BY is entirely vestigial, but it makes this
feature more usable and seems to make sense to change at the same time
we're changing related behaviors.
Along the way, fix "ALTER GROUP group_name ADD USER user_name" to
require the same privileges as "GRANT group_name TO user_name".
Previously, CREATEROLE privileges were sufficient for either, but
only the former form was permissible with ADMIN OPTION on the role.
Now, either CREATEROLE or ADMIN OPTION on the role suffices for
either spelling.
Patch by me, reviewed by Stephen Frost.
Discussion: http://postgr.es/m/CA+TgmoaFr-RZeQ+WoQ5nKPv97oT9+aDgK_a5+qWHSgbDsMp1Vg@mail.gmail.com
Perform some minor wordsmithing on two sentences in the COPY documentation
to make them clearer.
While there, also ensure to wrap a few occurrences of CSV in <literal>
which were missing this.
Reported-by: Eric Mutta <eric.mutta@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/166104548566.654.11680826843612576896@wrigleys.postgresql.org
This commit adds or fixes markups used in a couple of places in the docs
(for <command>, <systemitem> and <literal>). While on it, this
clarifies some of the documentation added recently for archiving modules
with archive_command, that would still be used as default choice if no
external module is defined (though an archive module could as well use
an archive_command).
Author: Maxim Yablokov
Discussion: https://postgr.es/m/b47ec4e8-6f6a-2aba-038e-d5db150b245e@postgrespro.ru
Backpatch-through: 15
Previously, "GRANT foo TO bar" or "GRANT foo TO bar GRANTED BY baz"
would record the OID of the grantor in pg_auth_members.grantor, but
that role could later be dropped without modifying or removing the
pg_auth_members record. That's not great, because we typically try
to avoid dangling references in catalog data.
Now, a role grant depends on the grantor, and the grantor can't be
dropped without removing the grant or changing the grantor. "DROP
OWNED BY" will remove the grant, just as it does for other kinds of
privileges. "REASSIGN OWNED BY" will not, again just like what we do
in other cases involving privileges.
pg_auth_members now has an OID column, because that is needed in order
for dependencies to work. It also now has an index on the grantor
column, because otherwise dropping a role would require a sequential
scan of the entire table to see whether the role's OID is in use as
a grantor. That probably wouldn't be too large a problem in practice,
but it seems better to have an index just in case.
A follow-on patch is planned with the goal of more thoroughly
rationalizing the behavior of role grants. This patch is just trying
to do enough to make sure that the data we store in the catalogs is at
some basic level valid.
Patch by me, reviewed by Stephen Frost
Discussion: http://postgr.es/m/CA+TgmoaFr-RZeQ+WoQ5nKPv97oT9+aDgK_a5+qWHSgbDsMp1Vg@mail.gmail.com
The table column that stores this is of type oid, but is actually limited
to uint16 and has a different path for creating new values. Some of
the documentation already referred to it as an ID, so let's standardize
on that.
While at it, most format strings already use %u, so for consintency
change the remaining stragglers using %d.
Per suggestions from Tom Lane and Justin Pryzby
Discussion: https://www.postgresql.org/message-id/3437166.1659620465%40sss.pgh.pa.us
Backpatch to v15
While PO files can be edited in any text editor, specialized tools for
translation editing can be quite helpful with automating tasks etc. Add
a small note about PO editors to encourage new translators to research
which tool works best for them.
Reviewed-by: Bruce Momjian <bruce@momjian.us>
Discussion: https://postgr.es/m/163490116698.684.10398197970578456928@wrigleys.postgresql.org
While almost all occurrences of "case-insensitive{ly}" were spelled with
a dash, a few were using "case insensitive{ly}" with a space instead. Fix
by changing these to use a dash to be consistent.
Discussion: https://postgr.es/m/7657EDEE-5EE2-4AAB-BA95-47B4F71653E1@yesql.se
This event can happen when using SET ACCESS METHOD, as the data files of
the materialized need a full refresh but this command tag was not
updated to reflect that. The documentation is updated to track this
behavior.
Author: Onder Kalaci
Discussion: https://postgr.es/m/CACawEhXwHN3X34FiwoYG8vXR-oyUdrp7qcfRWSzS+NPahS5gSw@mail.gmail.com
Backpatch-through: 15
The unit of size and allocated_size was not documented. Speciyfing the
unit is in line with how many other (but not all) system view attributes
are documented so fixing by adding the unit which is "bytes".
Author: Euler Taveira <euler@eulerto.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-by: coleman.rik@gmail.com
Discussion: https://postgr.es/m/166033703458.653.1583077816076994614@wrigleys.postgresql.org
Since HAVE_UNIX_SOCKETS is now defined unconditionally, remove the macro
and drop a small amount of dead code.
The last known systems not to have them (as far as I know at least) were
QNX, which we de-supported years ago, and Windows, which now has them.
If a new OS ever shows up with the POSIX sockets API but without working
AF_UNIX, it'll presumably still be able to compile the code, and fail at
runtime with an unsupported address family error. We might want to
consider adding a HINT that you should turn off the option to use it if
your network stack doesn't support it at that point, but it doesn't seem
worth making the relevant code conditional at compile time.
Also adjust a couple of places in the docs and comments that referred to
builds without Unix-domain sockets, since there aren't any. Windows
still gets a special mention in those places, though, because we don't
try to use them by default there yet.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
The messages were using 'two-phase transaction' at some places and
'prepared transaction' at other places. Make them consistently use
'prepared transaction'.
Reported-by: Ekaterina Kiryanova
Author: Peter Smith
Reviewed by: Amit Kapila
Backpatch-through: 15
Discussion: https://postgr.es/m/745414e7-efb2-a6ae-5b83-fcbdf35aabc8@postgrespro.ru
This commit addresses a few things around GUCs:
- The TCP-related parameters (the four tcp_keepalives_* and
client_connection_check_interval are listed in postgresql.conf.sample in
a subsection called "TCP settings" of "CONNECTIONS AND AUTHENTICATION",
but they did not have their own group name in guc.c.
- enable_group_by_reordering, stats_fetch_consistency and
recovery_prefetch had an inconsistent description, missing a dot at the
end.
- In postgresql.conf.sample, "Process title" should not have a section
of its own, but it should be a subsection of "REPORTING AND LOGGING".
This impacts the contents of pg_settings, which could be seen as a
compatibility break, so no backpatch is done. This is similar to the
cleanup done in a55a984.
Author: Shinya Kato
Discussion: https://postgr.es/m/5e0c9c608624eafbba910c344282cb14@oss.nttdata.com
Previously, if an extension script did CREATE OR REPLACE and there was
an existing object not belonging to the extension, it would overwrite
the object and adopt it into the extension. This is problematic, first
because the overwrite is probably unintentional, and second because we
didn't change the object's ownership. Thus a hostile user could create
an object in advance of an expected CREATE EXTENSION command, and would
then have ownership rights on an extension object, which could be
modified for trojan-horse-type attacks.
Hence, forbid CREATE OR REPLACE of an existing object unless it already
belongs to the extension. (Note that we've always forbidden replacing
an object that belongs to some other extension; only the behavior for
previously-free-standing objects changes here.)
For the same reason, also fail CREATE IF NOT EXISTS when there is
an existing object that doesn't belong to the extension.
Our thanks to Sven Klemm for reporting this problem.
Security: CVE-2022-2625
symlink() and readlink() are in SUSv2 and all targeted Unix systems have
them. We have partial emulation on Windows. Code that raised runtime
errors on systems without it has been dead for years, so we can remove
that and also references to such systems in the documentation.
Define HAVE_READLINK and HAVE_SYMLINK macros on Unix. Our Windows
replacement functions based on junction points can't be used for
relative paths or for non-directories, so the macros can be used to
check for full symlink support. The places that deal with tablespaces
can just use symlink functions without checking the macros. (If they
did check the macros, they'd need to provide an #else branch with a
runtime or compile time error, and it'd be dead code.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
Previously, a byte with the high bit set was just transmitted
as-is by charin() and charout(). This is problematic if the
database encoding is multibyte, because the result of charout()
won't be validly encoded, which breaks various stuff that
expects all text strings to be validly encoded. We've
previously decided to enforce encoding validity rather than try
to individually harden each place that might have a problem with
such strings, so it's time to do something about "char".
To fix, represent high-bit-set characters as \ooo (backslash
and three octal digits), following the ancient "escape" format
for bytea. charin() will continue to accept the old way as well,
though that is only reachable in single-byte encodings.
Add some test cases just so there is coverage for this code.
We'll otherwise leave this question undocumented as it was before,
because we don't really want to encourage end-user use of "char".
For the moment, back-patch into v15 so that this change appears
in 15beta3. If there's not great pushback we should consider
absorbing this change into the older branches.
Discussion: https://postgr.es/m/2318797.1638558730@sss.pgh.pa.us
These two new options can be used to either process all tables in
specific schemas or to skip processing all tables in specific
schemas. This change also refactors the handling of invalid
combinations of command-line options to a new helper function.
Author: Gilles Darold
Reviewed-by: Justin Pryzby, Nathan Bossart and Michael Paquier.
Discussion: https://postgr.es/m/929fbf3c-24b8-d454-811f-1d5898ab3e91%40migops.com
There wasn't an especially nice way to read all of a file while
passing missing_ok = true. Add an additional overloaded variant
to support that use-case.
While here, refactor the C code to avoid a rats-nest of PG_NARGS
checks, instead handling the argument collection in the outer
wrapper functions. It's a bit longer this way, but far more
straightforward.
(Upon looking at the code coverage report for genfile.c, I was
impelled to also add a test case for pg_stat_file() -- tgl)
Kyotaro Horiguchi
Discussion: https://postgr.es/m/20220607.160520.1984541900138970018.horikyota.ntt@gmail.com
... when it applies to partitioned relations. This is almost the
opposite of 0c06534bd6, which removed references to "partition" in
favour of "child".
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/20220525013248.GO19626@telsasoft.com
After commit 089480c07, it's necessary for background worker entry
points to be marked PGDLLEXPORT, else they aren't findable by
LookupBackgroundWorkerFunction(). Since pg_prewarm lacks any
regression tests, it's not surprising its worker entry points were
overlooked. (A quick search turned up no other such oversights.)
I added some documentation pointing out the need for this, too.
Robins Tharakan and Tom Lane
CAEP4nAzndnQv3-1QKb=D-hLoK3Rko12HHMFHHtdj2GQAUXO3gw@mail.gmail.com
We have a few commands that "can't run in a transaction block",
meaning that if they complete their processing but then we fail
to COMMIT, we'll be left with inconsistent on-disk state.
However, the existing defenses for this are only watertight for
simple query protocol. In extended protocol, we didn't commit
until receiving a Sync message. Since the client is allowed to
issue another command instead of Sync, we're in trouble if that
command fails or is an explicit ROLLBACK. In any case, sitting
in an inconsistent state while waiting for a client message
that might not come seems pretty risky.
This case wasn't reachable via libpq before we introduced pipeline
mode, but it's always been an intended aspect of extended query
protocol, and likely there are other clients that could reach it
before.
To fix, set a flag in PreventInTransactionBlock that tells
exec_execute_message to force an immediate commit. This seems
to be the approach that does least damage to existing working
cases while still preventing the undesirable outcomes.
While here, add some documentation to protocol.sgml that explicitly
says how to use pipelining. That's latent in the existing docs if
you know what to look for, but it's better to spell it out; and it
provides a place to document this new behavior.
Per bug #17434 from Yugo Nagata. It's been wrong for ages,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17434-d9f7a064ce2a88a3@postgresql.org
This addresses a couple of bugs in the REINDEX grammar, introduced by
83011ce:
- A name was never specified for DATABASE/SYSTEM, even if the query
included one. This caused such REINDEX queries to always work with any
object name, but we should complain if the object name specified does
not match the name of the database we are connected to. A test is added
for this case in the main regression test suite, provided by Álvaro.
- REINDEX SYSTEM CONCURRENTLY [name] was getting rejected in the
parser. Concurrent rebuilds are not supported for catalogs but the
error provided at execution time is more helpful for the user, and
allowing this flavor results in a simplification of the parsing logic.
- REINDEX DATABASE CONCURRENTLY was rebuilding the index in a
non-concurrent way, as the option was not being appended correctly in
the list of DefElems in ReindexStmt (REINDEX (CONCURRENTLY) DATABASE was
working fine. A test is added in the TAP tests of reindexdb for this
case, where we already have a REINDEX DATABASE CONCURRENTLY query
running on a small-ish instance. This relies on the work done in
2cbc3c1 for SYSTEM, but here we check if the OIDs of the index relations
match or not after the concurrent rebuild. Note that in order to get
this part to work, I had to tweak the tests so as the index OID and
names are saved separately. This change not affect the reliability or
of the coverage of the existing tests.
While on it, I have implemented a tweak in the grammar to reduce the
parsing by one branch, simplifying things even more.
Author: Michael Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/YttqI6O64wDxGn0K@paquier.xyz
The setting controls tha maximum length of the header line in expanded
format output. Possible settings are full, column, page, or an integer.
the default is full, the current behaviour, and in this case the header
line is the length of the widest line of output. column causes the
header to be truncated to the width of the first column, page causes it
to be truncated to the width of the terminal page, and an integer causes
it to be truncated to that value. If the full value is less than the
page or integer value no truncation occurs. If given without an argument
this option prints its current setting.
Platon Pronko, somewhat modified by me.
Discussion: https://postgr.es/m/f03d38a3-db96-a56e-d1bc-dbbc80bbde4d@gmail.com
We didn't explicitly say that random() uses a randomly-chosen seed
if you haven't called setseed(). Do so.
Also, remove ref/set.sgml's no-longer-accurate (and never very
relevant) statement that the seed value is multiplied by 2^31-1.
Back-patch to v12 where set.sgml's claim stopped being true.
The claim that we use a source of random bits as seed was debatable
before 4203842a1, too, so v12 seems like a good place to stop.
Per question from Carl Sopchak.
Discussion: https://postgr.es/m/f37bb937-9d99-08f0-4de7-80c91a3cfc2e@sopchak.me
We've long held the minimum at 3.80, but that's required more than
one workaround. Commit 0f39b70a6 broke it again, because it turns
out that exporting a target-specific variable didn't work in 3.80.
Considering that 3.81 is now old enough to get a driver's license,
and that the only remaining buildfarm member testing 3.80 (prairiedog)
is likely to be retired soon, let's just stop supporting 3.80.
Adjust docs and Makefile.global's minimum-version check to match.
There are a couple of comments in the Makefiles suggesting that
random things could be done differently after we desupport 3.80,
but I couldn't get excited about changing any of them right now.
Back-patch to v15, as 0f39b70a6 was.
Discussion: https://postgr.es/m/20220720172321.GL12702@telsasoft.com
This allows users to omit the statistics name in a CREATE STATISTICS
command, letting the system auto-generate a sensible, unique name,
putting the statistics object in the same schema as the table.
Simon Riggs, reviewed by Matthias van de Meent.
Discussion: https://postgr.es/m/CANbhV-FGD2d_C3zFTfT2aRfX_TaPSgOeKES58RLZx5XzQp5NhA@mail.gmail.com
This patch adds a new SUBSCRIPTION parameter "origin". It specifies
whether the subscription will request the publisher to only send changes
that don't have an origin or send changes regardless of origin. Setting it
to "none" means that the subscription will request the publisher to only
send changes that have no origin associated. Setting it to "any" means
that the publisher sends changes regardless of their origin. The default
is "any".
Usage:
CREATE SUBSCRIPTION sub1 CONNECTION 'dbname=postgres port=9999'
PUBLICATION pub1 WITH (origin = none);
This can be used to avoid loops (infinite replication of the same data)
among replication nodes.
This feature allows filtering only the replication data originating from
WAL but for initial sync (initial copy of table data) we don't have such a
facility as we can only distinguish the data based on origin from WAL. As
a follow-up patch, we are planning to forbid the initial sync if the
origin is specified as none and we notice that the publication tables were
also replicated from other publishers to avoid duplicate data or loops.
We forbid to allow creating origin with names 'none' and 'any' to avoid
confusion with the same name options.
Author: Vignesh C, Amit Kapila
Reviewed-By: Peter Smith, Amit Kapila, Dilip Kumar, Shi yu, Ashutosh Bapat, Hayato Kuroda
Discussion: https://postgr.es/m/CALDaNm0gwjY_4HFxvvty01BOT01q_fJLKQ3pWP9=9orqubhjcQ@mail.gmail.com
In the docs, the GUC flags that pg_settings_get_flags() reported were
listed using <simplelist>. But the list was treated as separate lines
in the existing function table and didn't look good. For better view,
this commit separates the list from the table entry for
pg_settings_get_flags() and adds the table for it at the bottom of
the existing function table.
Author: Fujii Masao
Reviewed-by: Alvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/f093edf9-6e5a-b119-ee50-6a2c97c79ee8@oss.nttdata.com
Upcoming custom Table Access Methods (TableAM) need benchmarking. Despite
pgbench doesn't have an explicit option for TableAM specification, one can
specify it using PGOPTION environmental variable. The present commit documents
this way to specify TableAM for pgbench.
Discussion: https://postgr.es/m/CAC77N6ih%3DLbhZQXV76grEsaVQkBL464Y2Foqq9o%3Df4UBfEOfEQ%40mail.gmail.com
Author: Michel Pelletier, Alexander Korotkov
Reviewed-by: Justin Pryzby, Mason Sharp, Michael Paquier
This allows aliases for sub-SELECTs and VALUES clauses in the FROM
clause to be omitted.
This is an extension of the SQL standard, supported by some other
database systems, and so eases the transition from such systems, as
well as removing the minor inconvenience caused by requiring these
aliases.
Patch by me, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCUCGCf82=hxd9N5n6xGHPyYpQnxW8HneeH+uP7yNALkWA@mail.gmail.com
Windows 10 gained support for flushing NTFS files with fdatasync()
semantics. The main advantage over open_datasync (in Windows API terms
FILE_FLAG_WRITE_THROUGH) is that the latter does not flush SATA drive
caches. The default setting is not changed, so users have to opt in to
this.
Discussion: https://postgr.es/m/CA%2BhUKGJZJVO%3DiX%2Beb-PXi2_XS9ZRqnn_4URh0NUQOwt6-_51xQ%40mail.gmail.com
Per discussion, this commit includes a couple of changes to these two
flavors of REINDEX:
* The grammar is changed to make the name of the object optional, hence
one can rebuild all the indexes of the wanted area by specifying only
"REINDEX DATABASE;" or "REINDEX SYSTEM;". Previously, the object name
was mandatory and had to match the name of the database on which the
command is issued.
* REINDEX DATABASE is changed to ignore catalogs, making this task only
possible with REINDEX SYSTEM. This is a historical change, but there
was no way to work only on the indexes of a database without touching
the catalogs. We have discussed more approaches here, like the addition
of an option to skip the catalogs without changing the original
behavior, but concluded that what we have here is for the best.
This builds on top of the TAP tests introduced in 5fb5b6c, showing the
change in behavior for REINDEX SYSTEM. reindexdb is updated so as we do
not issue an extra REINDEX SYSTEM when working on a database in the
non-concurrent case, something that was confusing when --concurrently
got introduced, so this simplifies the code.
Author: Simon Riggs
Reviewed-by: Ashutosh Bapat, Bernd Helmle, Álvaro Herrera, Cary Huang,
Michael Paquier
Discussion: https://postgr.es/m/CANbhV-H=NH6Om4-X6cRjDWfH_Mu1usqwkuYVp-hwdB_PSHWRfg@mail.gmail.com
Previously we displayed "DSMFillZeroWrite" while in posix_fallocate(),
because we shared the same wait event for "mmap" and "posix" DSM types.
Let's introduce a new wait event "DSMAllocate", to be more accurate.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220711174518.yldckniicknsxgzl%40awork3.anarazel.de
No members of the buildfarm are using this version of Visual Studio,
resulting in all the code cleaned up here as being mostly dead, and
VS2017 is the oldest version still supported.
More versions could be cut, but the gain would be minimal, while
removing only VS2013 has the advantage to remove from the core code all
the dependencies on the value defined by _MSC_VER, where compatibility
tweaks have accumulated across the years mostly around locales and
strtof(), so that's a nice isolated cleanup.
Note that this commit additionally allows a revert of 3154e16. The
versions of Visual Studio now supported range from 2015 to 2022.
Author: Michael Paquier
Reviewed-by: Juan José Santamaría Flecha, Tom Lane, Thomas Munro, Justin
Pryzby
Discussion: https://postgr.es/m/YoH2IMtxcS3ncWn+@paquier.xyz
Previously, the STORAGE specification was only available in ALTER
TABLE. This makes it available in CREATE TABLE as well.
Also make the code and the documentation for STORAGE and COMPRESSION
attributes consistent.
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: wenjing zeng <wjzeng2012@gmail.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/de83407a-ae3d-a8e1-a788-920eb334f25b@sigaev.ru
This moves the list of available languages from nls.mk into a separate
file called po/LINGUAS. Advantages:
- It keeps the parts notionally managed by programmers (nls.mk)
separate from the parts notionally managed by translators (LINGUAS).
- It's the standard practice recommended by the Gettext manual
nowadays.
- The Meson build system also supports this layout (and of course
doesn't know anything about our custom nls.mk), so this would enable
sharing the list of languages between the two build systems.
(The MSVC build system currently finds all po files by globbing, so it
is not affected by this change.)
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/557a9f5c-e871-edc7-2f58-a4140fb65b7b@enterprisedb.com
The following options are added to createuser:
* --valid-until to generate a VALID UNTIL clause for the role created.
* --bypassrls/--no-bypassrls for BYPASSRLS/NOBYPASSRLS.
* -m/--member to make the new role a member of an existing role, with an
extra ROLE clause generated. The clause generated overlaps with
-g/--role, but per discussion this was the most popular choice as option
name.
* -a/--admin for the addition of an ADMIN clause.
These option names are chosen to be completely new, so as they do not
impact anybody relying on the existing option set. Tests are added for
the new options and extended a bit, while on it, to cover more patterns
where quotes are added to various elements of the query generated.
Author: Shinya Kato
Reviewed-by: Nathan Bossart, Daniel Gustafsson, Robert Haas, Kyotaro
Horiguchi, David G. Johnston, Przemysław Sztoch
Discussion: https://postgr.es/m/69a9851035cf0f0477bcc5d742b031a3@oss.nttdata.com
Previously, ECPG could only cope with variable declarations whose
type names either weren't any SQL keyword, or were at least partially
reserved. If you tried to use something in the unreserved_keyword
category, you got a syntax error.
This is pretty awful, not only because it says right on the tin that
those words are not reserved, but because the set of such keywords
tends to grow over time. Thus, an ECPG program that was just fine
last year could fail when recompiled with a newer SQL grammar.
We had to work around this recently when STRING became a keyword,
but it's time for an actual fix instead of a band-aid.
To fix, borrow a trick from C parsers and make the lexer's behavior
change when it sees a word that is known as a typedef. This is not
free of downsides: if you try to use such a name as a SQL keyword
in EXEC SQL later in the program, it won't be recognized as a SQL
keyword, leading to a syntax error there instead. So in a real
sense this is just trading one hazard for another. But there is an
important difference: with this, whether your ECPG program works
depends only on what typedef names and SQL commands are used in the
program text. If it compiles today it'll still compile next year,
even if more words have become SQL keywords.
Discussion: https://postgr.es/m/3661437.1653855582@sss.pgh.pa.us
Now some foreign data wrappers support TRUNCATE command.
So it's useful to support TRUNCATE triggers on foreign tables for
audit logging or for preventing undesired truncation.
Author: Yugo Nagata
Reviewed-by: Fujii Masao, Ian Lawrence Barwick
Discussion: https://postgr.es/m/20220630193848.5b02e0d6076b86617a915682@sraoss.co.jp
PostgreSQL/POSTGRES has run on a huge range of CPUs and OSes. As we're
dropping some of the earliest systems the project was founded on, let's
provide a place to remember them.
Discussion: https://postgr.es/m/959917.1657522169%40sss.pgh.pa.us
Further to commit 92d70b77, let's drop the code we carry for the
following untested architectures: M68K, M88K, M32R, SuperH. We have no
idea if anything actually works there, and surely as vintage hardware
and microcontrollers they would be underpowered for modern purposes.
We could always consider re-adding SuperH based on evidence of usage and
build farm support, if someone shows up to provide it.
While here, SPARC is usually written in all caps.
Suggested-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (the idea, not the patch)
Discussion: https://postgr.es/m/959917.1657522169%40sss.pgh.pa.us
* Remove arbitrary mention of certain endianness and bitness variants;
it's enough to say that applicable variants are expected to work.
* List RISC-V (known to work, being tested).
* List SuperH and M88K (code exists, unknown status, like M68K).
* De-list VAX and remove code (known not to work).
* Remove stray trace of Alpha (support was removed years ago).
* List illumos, DragonFlyBSD (known to work, being tested).
* No need to single Windows out by listing a specific version, when we
don't do that for other OSes; it's enough to say that we support
current versions of the listed OSes (when 16 ships, that'll be
Windows 10+).
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Discussion: https://postgr.es/m/CA%2BhUKGKk7NZO1UnJM0PyixcZPpCGqjBXW_0bzFZpJBGAf84XKg%40mail.gmail.com
This CPU architecture has been discontinued. We already removed HP-UX
support, we never supported Windows/Itanium, and the open source
operating systems that a vintage hardware owner might hope to run have
all either ended Itanium support or never fully released support (NetBSD
may eventually). The extra code we carry for this rare ISA is now
untested. It seems like a good time to remove it.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/1415825.1656893299%40sss.pgh.pa.us
HP-UX hardware is no longer produced, build farm coverage recently
ended, and there are no known active maintainers targeting this OS.
Since there is a major rewrite of the build system in the pipeline for
PostgreSQL 16, and that requires development, testing and maintainance
for each OS and tool chain, it seems like a good time to drop support
for:
* HP-UX, the operating system.
* HP aCC, the HP-UX native compiler.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/1415825.1656893299%40sss.pgh.pa.us
This commit bumps the runtime value of _WIN32_WINNT to be 0x0A00 for any
builds on Windows. Hence, this makes Windows 10 the minimal requirement
when running PostgreSQL under WIN32, be it for builds of Cygwin, MinGW
or Visual Studio.
The previous minimal runtime version was either Windows Vista when
building with at least Visual Studio 2015 or Windows XP for the rest.
Windows 10 is the most modern version supported by Microsoft, and per
discussion, as we don't have buildfarm members that run older versions
anymore, this is the minimal supported version that suits better for our
needs. This will actually make easier the development of some patches,
two being async I/O and large page handling by avoiding a lot of
compatibility gotchas, on platforms that have most likely few users
anyway.
It is possible to remove MIN_WINNT in win32.h and the macros
IsWindowsXXXOrGreater() that were used in the code at runtime to check
which version of Windows was getting used. The change in pg_locale.c
comes from Juan. Note that all my tests passed, and that the CI is
green. The buildfarm will quickly tell if this needs more adjustments.
Author: Michael Paquier, Juan José Santamaría Flecha
Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/Yo7tHKD8VCkeNi71@paquier.xyz
auto_explain.log_parameter_max_length is a new GUC part of the
extension, similar to the corresponding core setting, that controls the
inclusion of query parameters in the logged explain output.
More tests are added to check the behavior of this new parameter: when
parameters logged in full (the default of -1), when disabled (value of
0) and when partially truncated (value different than the two others).
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87ee09mohb.fsf@wibble.ilmari.org
Amendment to 84ad713cf85aeffee5dd39f62d49a1b9e34632da: Not all
prepared statements have a result descriptor. As currently coded,
this would crash when reading pg_prepared_statements. Make those
cases return null for result_types instead. Also add a test case for
it.
Attempting such an operation would already fail, but in various and
confusing ways. For example, while in recovery, some elog() messages
would be reported, but these should never be user-facing. This commit
restricts any write operations done on large objects in a read-only
context, so as the errors generated are more user-friendly. This is per
the discussion done with Tom Lane and Robert Haas.
Some regression tests are added to check the case of all the SQL
functions working on large objects (including an update of the test's
alternate output).
Author: Yugo Nagata
Discussion: https://postgr.es/m/20220527153028.61a4608f66abcd026fd3806f@sraoss.co.jp
Interpret its privileges argument as a comma-separated list of
privilege names, as in has_table_privilege and other functions.
This is actually net less code, since the support routine to
parse that already exists, and we can drop convert_priv_string()
which had no other use-case.
Robins Tharakan
Discussion: https://postgr.es/m/e5a05dc54ba64408b3dd260171c1abaf@EX13D05UWC001.ant.amazon.com
POSIX shm_open() can sleep for a long time and fail spuriously because
of contention on an internal lock file on Solaris (and presumably
illumos). Commit 389869af fixed the main problem with this, namely that
we could crash, but it's now clear that "posix" is not a good default.
Therefore, choose "sysv" at initdb time on Solaris and illumos. Other
choices are still available by editing the postgresql.conf file.
Back-patch only to 15, because contention is much less likely further
back, and it doesn't seem like a good idea to change this in released
branches. This should clear up the failures on build farm animal
margay.
Discussion: https://postgr.es/m/CA%2BhUKGKqKrCV5xKWfh9rnm%3Do%3DDwZLTLtnsj_XpUi9g5%3DV%2B9oyg%40mail.gmail.com
We have had a working and tunable autovacuum
for at least a decade now, so remove the recommendation to
manually vacuum tables at least every night.
Autovacuum is now also triggered by INSERTs, so we can also
remove the recommendation to run VACUUM (ANALYZE) after lots
of INSERTs or DELETEs.
Instead, suggest using autovacuum by moving the respective
paragraph up to where the importance of VACUUM is emphasized.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-By: Magnus Hagander, Peter Geoghegan
Discussion: https://postgr.es/m/6f5e3da98fec14640f389d7b84c3b413833697f4.camel@cybertec.at
This patch documents that the initial data synchronization (tablesync) for
logical replication does not take into account the publication 'publish'
parameter when copying the existing table data.
Author: Peter Smith
Reviewed-by: Shi yu, Euler Taveira, Robert Haas, Amit Kapila
Discussion: https://postgr.es/m/CAHut+PtbfALjFpS2MkrvQ+wWQKByP7CNh9RtFta-r=BHEU3S3w@mail.gmail.com
072132f0 used the attnum offset to access the raw_fields array when
checking that the attribute names of the header and of the relation
match, leading to incorrect results or even crashes if the attribute
numbers of a relation are changed, like on a dropped attribute. This
fixes the logic to use the correct attribute names for the header
matching requirements.
Also, this commit disallows HEADER MATCH in COPY TO as there is no
validation that can be done in this case.
The tests are expanded for HEADER MATCH with COPY FROM and dropped
columns, with cases where a relation has a dropped and re-added column,
as well as a reduced set of columns.
Author: Julien Rouhaud
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/20220607154744.vvmitnqhyxrne5ms@jrouhaud
Three parameters have been using "int" rather than "integer" to describe
their type:
auth_delay.milliseconds
max_logical_replication_workers
pg_prewarm.autoprewarm_interval
This is inconsistent with any other integer GUCs listed in the docs
(148, as far as I can see).
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pv6X5T-veN2abUDUvBxZm+SSm-9otfi3LZPGyOc6u6hiA@mail.gmail.com
This reverts commits 5753d4ee32 and fe60b67250 that modified HOT to
ignore BRIN indexes. The commit message for 5753d4ee32 claims that:
When determining whether an index update may be skipped by using
HOT, we can ignore attributes indexed only by BRIN indexes. There
are no index pointers to individual tuples in BRIN, and the page
range summary will be updated anyway as it relies on visibility
info.
This is partially incorrect - it's true BRIN indexes don't point to
individual tuples, so HOT chains are not an issue, but the visibitlity
info is not sufficient to keep the index up to date. This can easily
result in corrupted indexes, as demonstrated in the hackers thread.
This does not mean relaxing the HOT restrictions for BRIN is a lost
cause, but it needs to handle the two aspects (allowing HOT chains and
updating the page range summaries) as separate. But that requires a
major changes, and it's too late for that in the current dev cycle.
Reported-by: Tomas Vondra
Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com
In addition, this moves the new paragraph in the MVCC page upwards, for
a more consistent flow; some minor markup mistakes, style issues and
typos are fixed too.
Per comments from Justin Pryzby.
Discussion: https://postgr.es/m/20220511163350.GL19626@telsasoft.com
This commit, in completion of 157f873, forces a ROLLBACK for
--single-transaction only when ON_ERROR_STOP is used when one of the
steps defined by -f/-c fails. Hence, COMMIT is always used when
ON_ERROR_STOP is not set, ignoring the status code of the last action
taken in the set of switches specified by -c/-f (previously ROLLBACK
would have been issued even without ON_ERROR_STOP if the last step
failed, while COMMIT was issued if a step in-between failed as long as
the last step succeeded, leading to more inconsistency).
While on it, this adds much more test coverage in this area when not
using ON_ERROR_STOP with multiple switch patterns involving -c and -f
for query files, single queries and slash commands.
The behavior of ON_ERROR_STOP is arguably a bug, but there was no much
support for a backpatch to force a ROLLBACK on a step failure, so this
change is done only on HEAD for now.
Per discussion with Tom Lane and Kyotaro Horiguchi.
Discussion: https://postgr.es/m/Yqbc8bAdwnP02na4@paquier.xyz
The previous wording was "the underlying data type's default collation
is used", which is wrong or at least misleading. The domain inherits
the base type's collation behavior, which if "default" actually can
mean that we use some non-default collation obtained from elsewhere.
Per complaint from Jian He.
Discussion: https://postgr.es/m/CACJufxHMR8_4WooDPjjvEdaxB2hQ5a49qthci8fpKP0MKemVRQ@mail.gmail.com
The patch introducing jsonpath dropped a para about that between
two related examples, and didn't bother updating the introductory
sentences that it falsified. The grammar was pretty shaky as well.
38bfae3 has moved the contents written to files by pg_upgrade under a
new directory called pg_upgrade_output.d/ located in the new cluster's
data folder, and it used a simple structure made of two subdirectories
leading to a fixed structure: log/ and dump/. This design has made
weaker pg_upgrade on repeated calls, as we could get failures when
creating one or more of those directories, while potentially losing the
logs of a previous run (logs are retained automatically on failure, and
cleaned up on success unless --retain is specified). So a user would
need to clean up pg_upgrade_output.d/ as an extra step for any repeated
calls of pg_upgrade. The most common scenario here is --check followed
by the actual upgrade, but one could see a failure when specifying an
incorrect input argument value. Removing entirely the logs would have
the disadvantage of removing all the past information, even if --retain
was specified at some past step.
This result is annoying for a lot of users and automated upgrade flows.
So, rather than requiring a manual removal of pg_upgrade_output.d/, this
redesigns the set of output directories in a more dynamic way, based on
a suggestion from Tom Lane and Daniel Gustafsson. pg_upgrade_output.d/
is still the base path, but a second directory level is added, mostly
named after an ISO-8601-formatted timestamp (in short human-readable,
with milliseconds appended to the name to avoid any conflicts). The
logs and dumps are saved within the same subdirectories as previously,
as of log/ and dump/, but these are located inside the subdirectory
named after the timestamp.
The logs of a given run are removed only after a successful run if
--retain is not used, and pg_upgrade_output.d/ is kept if there are any
logs from a previous run. Note that previously, pg_upgrade would have
kept the logs even after a successful --check but that was inconsistent
compared to the case without --check when using --retain. The code in
charge of the removal of the output directories is now refactored into a
single routine.
Two TAP tests are added with some --check commands (one failure case and
one success case), to look after the issue fixed here. Note that the
tests had to be tweaked a bit to fit with the new directory structure so
as it can find any logs generated on failure. This is still going to
require a change in the buildfarm client for the case where pg_upgrade
is tested without the TAP test, though, but I'll tackle that with a
separate patch where needed.
Reported-by: Tushar Ahuja
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson, Justin Pryzby
Discussion: https://postgr.es/m/77e6ecaa-2785-97aa-f229-4b6e047cbd2b@enterprisedb.com
psql --single-transaction is able to handle multiple -c and -f switches
in a single transaction since d5563d7d, but this had the surprising
behavior of forcing a transaction COMMIT even if psql failed with an
error in the client (for example incorrect path given to \copy), which
would generate an error, but still commit any changes that were already
applied in the backend. This commit makes the behavior more consistent,
by enforcing a transaction ROLLBACK if any commands fail, both
client-side and backend-side, so as no changes are applied if one error
happens in any of them.
Some tests are added on HEAD to provide some coverage about all that.
Backend-side errors are unreliable as IPC::Run can complain on SIGPIPE
if psql quits before reading a query result, but that should work
properly in the case where any errors come from psql itself, which is
what the original report is about.
Reported-by: Christoph Berg
Author: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/17504-76b68018e130415e@postgresql.org
Backpatch-through: 10
The previous entry invited confusion between what uniq() does
by itself and what it does when combined with sort(). The latter
usage is pretty useful so we should show it, but add an additional
example to clarify the results of uniq() alone.
Per suggestion from Martin Kalcher. Back-patch to v13, where
we switched to formatting that supports multiple examples.
Discussion: https://postgr.es/m/165407884456.573551.8779012279828726162@wrigleys.postgresql.org
Currently, we simply combine the column lists when publishing tables on
multiple publications and that can sometimes lead to unexpected behavior.
Say, if a column is published in any row-filtered publication, then the
values for that column are sent to the subscriber even for rows that don't
match the row filter, as long as the row matches the row filter for any
other publication, even if that other publication doesn't include the
column.
The main purpose of introducing a column list is to have statically
different shapes on publisher and subscriber or hide sensitive column
data. In both cases, it doesn't seem to make sense to combine column
lists.
So, we disallow the cases where the column list is different for the same
table when combining publications. It can be later extended to combine the
column lists for selective cases where required.
Reported-by: Alvaro Herrera
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/202204251548.mudq7jbqnh7r@alvherre.pgsql
The example given for anyelement <@ anymultirange didn't return
true as claimed; adjust it so it does.
In passing, change a couple of sample results where the modern
numeric-based logic produces a different number of trailing zeroes
than before.
Erik Rijkers
Discussion: https://postgr.es/m/cc35735d-1ec1-5bb3-9e27-cddbab7afa23@xs4all.nl
The PostgreSQL limitations section of the documents mentioned the limit
on the number of columns that can exist in a table. Users might be
surprised to find that there's also a limit on the number of columns that
can exist in a targetlist. Users may experience restrictions which
surprise them if they happened to select a large number of columns from
several tables with many columns. Here we document that there is a
limitation on this and mention what that limit actually is.
Wording proposal by Alvaro Herrera
Reported-by: Vladimir Sitnikov
Author: Dave Crammer
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAB=Je-E18aTYpNqje4mT0iEADpeGLSzwUvo3H9kRRuDdsNo4aQ@mail.gmail.com
Backpatch-through: 12, where the limitations section was added
This reverts commit d9d076222f "VACUUM: ignore indexing operations
with CONCURRENTLY".
These changes caused indexes created with the CONCURRENTLY option to
miss heap tuples that were HOT-updated and HOT-pruned during the index
creation. Before these changes, HOT pruning would have been prevented
by the Xmin of the transaction creating the index, but because this
change was precisely to allow the Xmin to move forward ignoring that
backend, now other backends scanning the table can prune them. This is
not a problem for VACUUM (which requires a lock that conflicts with a
CREATE INDEX CONCURRENTLY operation), but HOT-prune can definitely
occur. In other words, Xmin advancement was sped up, but at the cost of
corrupting the resulting index.
Regrettably, this means that the new feature in PG14 that RIC/CIC on
very large tables no longer force VACUUM to retain very old tuples goes
away. We might try to implement it again in a later release, but for
now the risk of indexes missing tuples is too high and there's no easy
fix.
Backpatch to 14, where this change appeared.
Reported-by: Peter Slavov <pet.slavov@gmail.com>
Diagnosys-by: Andrey Borodin <x4mmm@yandex-team.ru>
Diagnosys-by: Michael Paquier <michael@paquier.xyz>
Diagnosys-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/17485-396609c6925b982d%40postgresql.org
runtime.sgml contains a passing reference to the minimum server
version that pg_dump[all] can dump from. That was 7.0 for many
years, but when 64f3524e2 raised it to 8.0, we missed updating this
bit. Then when 30e7c175b raised it to 9.2, we missed it again.
Given that track record, I'm not too hopeful that we'll remember
to fix this in future changes ... but for now, make the docs match
reality in each branch.
Noted by Daniel Westermann.
Discussion: https://postgr.es/m/GV0P278MB041917EB3E2FE8704B5AE2C6D2DC9@GV0P278MB0419.CHEP278.PROD.OUTLOOK.COM
The information generated when track_activities is accessible to
superusers, roles with the privileges of pg_read_all_stats, as well as
roles one has the privileges of. The original text did not outline the
last point, while the change done in ac1ae47 was unclear about the
second point.
Per discussion with Nathan Bossart.
Discussion: https://postgr.es/m/20220521185743.GA886636@nathanxps13
Backpatch-through: 10
The form taking anymultirange had not been documented. This was
fixed in HEAD in b21c4cf95, but that should have been back-patched
to v14 since the function was added there. Do so now.
Also, the form taking anyrange was incorrectly documented as
returning anymultirange, when it returns anyrange.
Remove b21c4cf95 from the v15 release notes, since it no longer
qualifies as new-in-v15.
Noted by Shay Rojansky.
Discussion: https://postgr.es/m/CADT4RqAktzP7t6SFf0Xqm9YhahzvsmxFbzXe-gFOd=+_CHm0JA@mail.gmail.com
Foreign tables can be partitioned, but previous documentation commits
left the syntax synopsis both incomplete and incorrect.
Justin Pryzby and Amit Langote
Discussion: http://postgr.es/m/20220521130922.GX19626@telsasoft.com
The description of track_activities mentioned that it is visible to
superusers and that the information related to the current session can
be seen, without telling about pg_read_all_stats. Roles that are
granted the privileges of pg_read_all_stats can also see this
information, so mention it in the docs.
Author: Ian Barwick
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/CAB8KJ=jhPyYFu-A5r-ZGP+Ax715mUKsMxAGcEQ9Cx_mBAmrPow@mail.gmail.com
Backpatch-through: 10
Amit Kapila
Tom Lane
Alvaro Herrera
Peter Eisentraut
Michael Paquier
Andres Freund
Fujii Masao
Daniel Gustafsson
John Naylor
David Rowley
Bruce Momjian
Etsuro Fujita
Andrew Dunstan
Robert Haas
Thomas Munro
Jeff Davis
Tatsuo Ishii
Noah Misch
Dean Rasheed
Alexander Korotkov
Magnus Hagander
Tomas Vondra