add_path_precheck was doing exact comparisons of path costs, but it really
needs to do them fuzzily to be sure it won't reject paths that could
survive add_path's comparisons. (This can only matter if the initial cost
estimate is very close to the final one, but that turns out to often be
true.)
Also, it should ignore startup cost for this purpose if and only if
compare_path_costs_fuzzily would do so. The previous coding always ignored
startup cost for parameterized paths, which is wrong as of commit
3f59be836c555fa6; it could result in improper early rejection of paths that
we care about for SEMI/ANTI joins. It also always considered startup cost
for unparameterized paths, which is just as wrong though the only effect is
to waste planner cycles on paths that can't survive. Instead, it should
consider startup cost only when directed to by the consider_startup/
consider_param_startup relation flags.
Likewise, compare_path_costs_fuzzily should have symmetrical behavior
for parameterized and unparameterized paths. In this case, the best
answer seems to be that after establishing that total costs are fuzzily
equal, we should compare startup costs whether or not the consider_xxx
flags are on. That is what it's always done for unparameterized paths,
so let's make the behavior for parameterized paths match.
These issues were noted while developing the SEMI/ANTI join costing fix
of commit 3f59be836c, but we chose not to back-patch these fixes,
because they can cause changes in the planner's choices among
nearly-same-cost plans. (There is in fact one minor change in plan choice
within the core regression tests.) Destabilizing plan choices in back
branches without very clear improvements is frowned on, so we'll just fix
this in HEAD.
When the inner side of a nestloop SEMI or ANTI join is an indexscan that
uses all the join clauses as indexquals, it can be presumed that both
matched and unmatched outer rows will be processed very quickly: for
matched rows, we'll stop after fetching one row from the indexscan, while
for unmatched rows we'll have an indexscan that finds no matching index
entries, which should also be quick. The planner already knew about this,
but it was nonetheless charging for at least one full run of the inner
indexscan, as a consequence of concerns about the behavior of materialized
inner scans --- but those concerns don't apply in the fast case. If the
inner side has low cardinality (many matching rows) this could make an
indexscan plan look far more expensive than it actually is. To fix,
rearrange the work in initial_cost_nestloop/final_cost_nestloop so that we
don't add the inner scan cost until we've inspected the indexquals, and
then we can add either the full-run cost or just the first tuple's cost as
appropriate.
Experimentation with this fix uncovered another problem: add_path and
friends were coded to disregard cheap startup cost when considering
parameterized paths. That's usually okay (and desirable, because it thins
the path herd faster); but in this fast case for SEMI/ANTI joins, it could
result in throwing away the desired plain indexscan path in favor of a
bitmap scan path before we ever get to the join costing logic. In the
many-matching-rows cases of interest here, a bitmap scan will do a lot more
work than required, so this is a problem. To fix, add a per-relation flag
consider_param_startup that works like the existing consider_startup flag,
but applies to parameterized paths, and set it for relations that are the
inside of a SEMI or ANTI join.
To make this patch reasonably safe to back-patch, care has been taken to
avoid changing the planner's behavior except in the very narrow case of
SEMI/ANTI joins with inner indexscans. There are places in
compare_path_costs_fuzzily and add_path_precheck that are not terribly
consistent with the new approach, but changing them will affect planner
decisions at the margins in other cases, so we'll leave that for a
HEAD-only fix.
Back-patch to 9.3; before that, the consider_startup flag didn't exist,
meaning that the second aspect of the patch would be too invasive.
Per a complaint from Peter Holzer and analysis by Tomas Vondra.
The function is given a fourth parameter, which defaults to true. When
this parameter is true, if the last element of the path is missing
in the original json, jsonb_set creates it in the result and assigns it
the new value. If it is false then the function does nothing unless all
elements of the path are present, including the last.
Based on some original code from Dmitry Dolgov, heavily modified by me.
Catalog version bumped.
The argument that this is a sufficiently-expected case to be silently
ignored seems pretty thin. Andres had brought it up back when we were
still considering that most fsync failures should be hard errors, and it
probably would be legit not to fail hard for ETXTBSY --- but the same is
true for EROFS and other cases, which is why we gave up on hard failures.
ETXTBSY is surely not a normal case, so logging the failure seems fine
from here.
This undoes a poorly-thought-out choice in commit 970a18687f, namely
to export guc.c's internal variable data_directory. The authoritative
variable so far as C code is concerned is DataDir; there is no reason for
anything except specific bits of GUC code to look at the GUC variable.
After yesterday's commits fixing the fsync-on-restart patch, the only
remaining misuse of data_directory was in AlterSystemSetConfigFile(),
which would be much better off just using a relative path anyhow: it's
less code and it doesn't break if the DBA moves the data directory of a
running system, which is a case we've taken some pains over in the past.
This is mostly cosmetic, so no need for a back-patch (and I'd be hesitant
to remove a global variable in stable branches anyway).
Commit 2ce439f337 introduced a rather serious
regression, namely that if its scan of the data directory came across any
un-fsync-able files, it would fail and thereby prevent database startup.
Worse yet, symlinks to such files also caused the problem, which meant that
crash restart was guaranteed to fail on certain common installations such
as older Debian.
After discussion, we agreed that (1) failure to start is worse than any
consequence of not fsync'ing is likely to be, therefore treat all errors
in this code as nonfatal; (2) we should not chase symlinks other than
those that are expected to exist, namely pg_xlog/ and tablespace links
under pg_tblspc/. The latter restriction avoids possibly fsync'ing a
much larger part of the filesystem than intended, if the user has left
random symlinks hanging about in the data directory.
This commit takes care of that and also does some code beautification,
mainly moving the relevant code into fd.c, which seems a much better place
for it than xlog.c, and making sure that the conditional compilation for
the pre_sync_fname pass has something to do with whether pg_flush_data
works.
I also relocated the call site in xlog.c down a few lines; it seems a
bit silly to be doing this before ValidateXLOGDirectoryStructure().
The similar logic in initdb.c ought to be made to match this, but that
change is noncritical and will be dealt with separately.
Back-patch to all active branches, like the prior commit.
Abhijit Menon-Sen and Tom Lane
Ensure that we null-terminate the result string (one place in pg_rewind).
Be paranoid about out-of-range results from readlink() (should not happen,
but there is no good reason for some call sites to be careful about it and
others not). Consistently use the whole buffer, not sometimes one byte
less. Ensure we emit an appropriate errcode() in all cases. Spell the
error messages the same way.
The only serious bug here is the missing null-termination in pg_rewind,
which is new code, so no need for a back-patch.
Abhijit Menon-Sen and Tom Lane
Seems to have been an oversight in the original leakproofness patch.
Per report and patch from Jeevan Chalke.
In passing, prettify some awkward leakproof-related code in AlterFunction.
Commit 9b74f32cdb did this for objects of
type jbvBinary, but in trying further to simplify some of the new jsonb
code I discovered that objects of type jbvObject or jbvArray passed as
WJB_ELEM or WJB_VALUE also caused problems. These too are now added
component by component.
Backpatch to 9.4.
brin_form_tuple calculated an exact tuple size, then palloc'd and
filled just that much. Later, brin_doinsert or brin_doupdate would
MAXALIGN the tuple size and tell PageAddItem that that was the size
of the tuple to insert. If the original tuple size wasn't a multiple
of MAXALIGN, the net result would be that PageAddItem would memcpy
a few more bytes than the palloc request had been for.
AFAICS, this is totally harmless in the real world: the error is a
read overrun not a write overrun, and palloc would certainly have
rounded the request up to a MAXALIGN multiple internally, so there's
no chance of the memcpy fetching off the end of memory. Valgrind,
however, is picky to the byte level not the MAXALIGN level.
Fix it by pushing the MAXALIGN step back to brin_form_tuple. (The other
possible source of tuples in this code, brin_form_placeholder_tuple,
was already producing a MAXALIGN'd result.)
In passing, be a bit more paranoid about internal allocations in
brin_form_tuple.
Multixact truncation is now handled differently, and this file hadn't
gotten the memo.
Per note from Amit Langote. I didn't use his patch, though.
Also update the description of infomask bits, which weren't completely up
to date either. This commit also propagates b01a4f6838 back to 9.3 and
9.4, which apparently I failed to do back then.
Some of this is made possible by commit
9b74f32cdb which lets pushJsonbValue
handle binary Jsonb values, meaning that clients no longer have to, and
some is just doing things in simpler and more straightforward ways.
Fix some places where pgindent did silly stuff, often because project
style wasn't followed to begin with. (I've not touched the atomics
headers, though.)
The name objectType is widely used as a field name, and it's pure luck that
this conflict has not caused pgindent to go crazy before. It messed up
pg_audit.c pretty good though. Since pg_shdepend.c doesn't export this
typedef and only uses it in three places, changing that seems saner than
changing the field usages.
Back-patch because we're contemplating using the union of all branch
typedefs for future pgindent runs, so this won't fix anything if it
stays the same in back branches.
Remove a bunch of "extern Datum foo(PG_FUNCTION_ARGS);" declarations that
are no longer needed now that PG_FUNCTION_INFO_V1(foo) provides that.
Some of these were evidently missed in commit e7128e8dbb, but others
were cargo-culted in in code added since then. Possibly that can be blamed
in part on the fact that we'd not fixed relevant documentation examples,
which I've now done.
Typo in commit 7cbee7c0a. No practical effect since the buffer should
never actually be overrun, but various compilers and static analyzers will
whine about it.
Petr Jelinek
Fix confusion in documentation, substantial memory leakage if float8 or
float4 are pass-by-reference, and assorted comments that were obsoleted
by commit 98edd617f3.
Previously, INSERT with ON CONFLICT DO UPDATE specified used a new
command tag -- UPSERT. It was introduced out of concern that INSERT as
a command tag would be a misrepresentation for ON CONFLICT DO UPDATE, as
some affected rows may actually have been updated.
Alvaro Herrera noticed that the implementation of that new command tag
was incomplete; in subsequent discussion we concluded that having it
doesn't provide benefits that are in line with the compatibility breaks
it requires.
Catversion bump due to the removal of PlannedStmt->isUpsert.
Author: Peter Geoghegan
Discussion: 20150520215816.GI5885@postgresql.org
Silly oversight in commit 1dc5ebc9077ab742079ce5dac9a6664248d42916:
when array2 is an expanded array, it might have array2->xpn.dnulls equal
to NULL, indicating the array is known null-free. The code wasn't
expecting that, because it formerly always used deconstruct_array() which
always delivers a nulls array.
Per bug #13334 from Regina Obe.
pushJsonbValue was accepting jbvBinary objects passed as WJB_ELEM or
WJB_VALUE data. While this succeeded, when those objects were later
encountered in attempting to convert the result to Jsonb, errors
occurred. With this change we ghuarantee that a JSonbValue constructed
from calls to pushJsonbValue does not contain any jbvBinary objects.
This cures a problem observed with jsonb_delete.
This means callers of pushJsonbValue no longer need to perform this
unpacking themselves. A subsequent patch will perform some cleanup in
that area.
The error was not triggered by any 9.4 code, but this is a publicly
visible routine, and so the error could be exercised by third party
code, therefore backpatch to 9.4.
Bug report from Peter Geoghegan, fix by me.
With commit de768844, a copy of the partial segment was archived with the
.partial suffix, but the original file was still left in pg_xlog, so it
didn't actually solve the problems with archiving the partial segment that
it was supposed to solve. With this patch, the partial segment is renamed
rather than copied, so we only archive it with the .partial suffix.
Also be more robust in detecting if the last segment is already being
archived. Previously I used XLogArchiveIsBusy() for that, but that's not
quite right. With archive_mode='always', there might be a .ready file for
it, and we don't want to rename it to .partial in that case.
The old segment is needed until we're fully committed to the new timeline,
i.e. until we've written the end-of-recovery WAL record and updated the
min recovery point and timeline in the control file. So move the renaming
later in the startup sequence, after all that's been done.
Paul Ramsey reported that commit 35fcb1b3d0
induced a core dump on commuted ORDER BY expressions, because it was
assuming that the indexorderby expression could be found verbatim in the
relevant equivalence class, but it wasn't there. We really don't need
anything that complicated anyway; for the data types likely to be used for
index ORDER BY operators in the foreseeable future, the exprType() of the
ORDER BY expression will serve fine. (The case where we'd have to work
harder is where the ORDER BY expression's result is only binary-compatible
with the declared input type of the ordering operator; long before worrying
about that, one would need to get rid of GiST's hard-wired assumption that
said datatype is float8.)
Aside from fixing that crash and adding a regression test for the case,
I did some desultory code review:
nodeIndexscan.c was likewise overthinking how hard it ought to work to
identify the datatype of the ORDER BY expressions.
Add comments explaining how come nodeIndexscan.c can get away with
simplifying assumptions about NULLS LAST ordering and no backward scan.
Revert no-longer-needed changes of find_ec_member_for_tle(); while the
new definition was no worse than the old, it wasn't better either, and
it might cause back-patching pain.
Revert entirely bogus additions to genam.h.
We want this struct to be exactly a series of 3 int16 words, no more
and no less. Historically, at least, some ARM compilers preferred to
pad it to 8 bytes unless coerced. Our old way of doing that was just
to use __attribute__((packed)), but as pointed out by Piotr Stefaniak,
that does too much: it also licenses the compiler to give the struct
only byte-alignment. We don't want that because it adds access overhead,
possibly quite significant overhead. According to the GCC manual, what
we want requires also specifying __attribute__((align(2))). It's not
entirely clear if all the relevant compilers accept this pragma as well,
but we can hope the buildfarm will tell us if not. We can also add a
static assertion that should fire if the compiler padded the struct.
Since the combination of these pragmas should define exactly what we
want on any compiler that accepts them, let's try using them wherever
we think they exist, not only for __arm__. (This is likely to expose
that the conditional definitions in c.h are inadequate, but finding
that out would be a good thing.)
The immediate motivation for this is that the current definition of
ExecRowMark allows its curCtid field to be misaligned. It is not clear
whether there are any other uses of ItemPointerData with a similar hazard.
We could change the definition of ExecRowMark if this doesn't work, but
it would be far better to have a future-proof fix.
Piotr Stefaniak, some further hacking by me
Previously even if recovery_target_action was set to pause and
the recovery target was reached, the recovery could never be paused.
Because the setting of pause was *always* overridden with that of
shutdown unexpectedly. This override is valid and intentional
if hot_standby is not enabled because there is no way to resume
the paused recovery in this case and the setting of pause is
completely useless. But not if hot_standby is enabled.
This patch changes the code so that the setting of pause is overridden
with that of shutdown only when hot_standby is not enabled.
Bug reported by Andres Freund
Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
Neither the deparsing of the new alias for INSERT's target table, nor of
the inference clause was supported. Also fixup a typo in an error
message.
Add regression tests to test those code paths.
Author: Peter Geoghegan
Defer lookup of opfamily and input type of a of a user specified opclass
until the optimizer selects among available unique indexes; and store
the opclass in the parse analyzed tree instead. The primary reason for
doing this is that for rule deparsing it's easier to use the opclass
than the previous representation.
While at it also rename a variable in the inference code to better fit
it's purpose.
This is separate from the actual fixes for deparsing to make review
easier.
The point of the assertion is to ensure that the arrays allocated in stack
are large enough, but the check was one item short.
This won't matter in practice because MaxIndexTuplesPerPage is an
overestimate, so you can't have that many items on a page in reality.
But let's be tidy.
Spotted by Anastasia Lubennikova. Backpatch to all supported versions, like
the patch that added the assertion.
The plain C string language name needs to be wrapped in makeString() so
that the parse tree is copyable. This is detectable by
-DCOPY_PARSE_PLAN_TREES. Add a test case for the COMMENT case.
Also make the quoting in the error messages more consistent.
discovered by Tom Lane
These were "text", but that's a bad idea because it has collation-dependent
ordering. No index in template0 should have collation-dependent ordering,
especially not indexes on shared catalogs. There was general agreement
that provider names don't need to be longer than other identifiers, so we
can fix this at a small waste of table space by changing from text to name.
There's no way to fix the problem in the back branches, but we can hope
that security labels don't yet have widespread-enough usage to make it
urgent to fix.
There needs to be a regression sanity test to prevent us from making this
same mistake again; but before putting that in, we'll need to get rid of
similar brain fade in the recently-added pg_replication_origin catalog.
Note: for lack of a suitable testing environment, I've not really exercised
this change. I trust the buildfarm will show up any mistakes.
The previous coding was a leftover from attempting to hang all the on
conflict logic onto modify table's child nodes. It appears to not have
actually caused problems except for explain.
Add test exercising the broken and some other code paths.
Author: Peter Geoghegan and Andres Freund
Commit 83e176ec18 removed the longstanding
support functions for block sampling without any consideration of the
impact this would have on third-party FDWs. The new API is not notably
more functional for FDWs than the old, so forcing them to change doesn't
seem like a good thing. We can provide the old API as a wrapper (more
or less) around the new one for a minimal amount of extra code.
PostgreSQL already checked the vast majority of these, missing this
handful that nearly cannot fail. If putenv() failed with ENOMEM in
pg_GSS_recvauth(), authentication would proceed with the wrong keytab
file. If strftime() returned zero in cache_locale_time(), using the
unspecified buffer contents could lead to information exposure or a
crash. Back-patch to 9.0 (all supported versions).
Other unchecked calls to these functions, especially those in frontend
code, pose negligible security concern. This patch does not address
them. Nonetheless, it is always better to check return values whose
specification provides for indicating an error.
In passing, fix an off-by-one error in strftime_win32()'s invocation of
WideCharToMultiByte(). Upon retrieving a value of exactly MAX_L10N_DATA
bytes, strftime_win32() would overrun the caller's buffer by one byte.
MAX_L10N_DATA is chosen to exceed the length of every possible value, so
the vulnerable scenario probably does not arise.
Security: CVE-2015-3166
Reentering this function with the right timing caused a double free,
typically crashing the backend. By synchronizing a disconnection with
the authentication timeout, an unauthenticated attacker could achieve
this somewhat consistently. Call be_tls_close() solely from within
proc_exit_prepare(). Back-patch to 9.0 (all supported versions).
Benkocs Norbert Attila
Security: CVE-2015-3165
This oversight results in a crash at executor startup if the plan has
been copied. outfuncs.c was missed as well.
While we could probably have taught both those files to cope with the
originally chosen representation of an Oid array, it would have been
painful, not least because there'd be no easy way to verify the array
length. An Oid List is far easier to work with. And AFAICS, there is
no particular notational benefit to using an array rather than a list
in the existing parts of the patch either. So just change it to a list.
Error in commit 35fcb1b3d0, which is new,
so no need for back-patch.
This SQL standard functionality allows to aggregate data by different
GROUP BY clauses at once. Each grouping set returns rows with columns
grouped by in other sets set to NULL.
This could previously be achieved by doing each grouping as a separate
query, conjoined by UNION ALLs. Besides being considerably more concise,
grouping sets will in many cases be faster, requiring only one scan over
the underlying data.
The current implementation of grouping sets only supports using sorting
for input. Individual sets that share a sort order are computed in one
pass. If there are sets that don't share a sort order, additional sort &
aggregation steps are performed. These additional passes are sourced by
the previous sort step; thus avoiding repeated scans of the source data.
The code is structured in a way that adding support for purely using
hash aggregation or a mix of hashing and sorting is possible. Sorting
was chosen to be supported first, as it is the most generic method of
implementation.
Instead of, as in an earlier versions of the patch, representing the
chain of sort and aggregation steps as full blown planner and executor
nodes, all but the first sort are performed inside the aggregation node
itself. This avoids the need to do some unusual gymnastics to handle
having to return aggregated and non-aggregated tuples from underlying
nodes, as well as having to shut down underlying nodes early to limit
memory usage. The optimizer still builds Sort/Agg node to describe each
phase, but they're not part of the plan tree, but instead additional
data for the aggregation node. They're a convenient and preexisting way
to describe aggregation and sorting. The first (and possibly only) sort
step is still performed as a separate execution step. That retains
similarity with existing group by plans, makes rescans fairly simple,
avoids very deep plans (leading to slow explains) and easily allows to
avoid the sorting step if the underlying data is sorted by other means.
A somewhat ugly side of this patch is having to deal with a grammar
ambiguity between the new CUBE keyword and the cube extension/functions
named cube (and rollup). To avoid breaking existing deployments of the
cube extension it has not been renamed, neither has cube been made a
reserved keyword. Instead precedence hacking is used to make GROUP BY
cube(..) refer to the CUBE grouping sets feature, and not the function
cube(). To actually group by a function cube(), unlikely as that might
be, the function name has to be quoted.
Needs a catversion bump because stored rules may change.
Author: Andrew Gierth and Atri Sharma, with contributions from Andres Freund
Reviewed-By: Andres Freund, Noah Misch, Tom Lane, Svenne Krap, Tomas
Vondra, Erik Rijkers, Marti Raudsepp, Pavel Stehule
Discussion: CAOeZVidmVRe2jU6aMk_5qkxnB7dfmPROzM7Ur8JPW5j8Y5X-Lw@mail.gmail.com
This lets BRIN be used with R-Tree-like indexing strategies.
Also provided are operator classes for range types, box and inet/cidr.
The infrastructure provided here should be sufficient to create operator
classes for similar datatypes; for instance, opclasses for PostGIS
geometries should be doable, though we didn't try to implement one.
(A box/point opclass was also submitted, but we ripped it out before
commit because the handling of floating point comparisons in existing
code is inconsistent and would generate corrupt indexes.)
Author: Emre Hasegeli. Cosmetic changes by me
Review: Andreas Karlsson
For upcoming BRIN opclasses, it's convenient to have strategy numbers
defined in a single place. Since there's nothing appropriate, create
it. The StrategyNumber typedef now lives there, as well as existing
strategy numbers for B-trees (from skey.h) and R-tree-and-friends (from
gist.h). skey.h is forced to include stratnum.h because of the
StrategyNumber typedef, but gist.h is not; extensions that currently
rely on gist.h for rtree strategy numbers might need to add a new
A few .c files can stop including skey.h and/or gist.h, which is a nice
side benefit.
Per discussion:
https://www.postgresql.org/message-id/20150514232132.GZ2523@alvh.no-ip.org
Authored by Emre Hasegeli and Álvaro.
(It's not clear to me why bootscanner.l has any #include lines at all.)
Our previous code for GB18030 <-> UTF8 conversion only covered Unicode code
points up to U+FFFF, but the actual spec defines conversions for all code
points up to U+10FFFF. That would be rather impractical as a lookup table,
but fortunately there is a simple algorithmic conversion between the
additional code points and the equivalent GB18030 byte patterns. Make use
of the just-added callback facility in LocalToUtf/UtfToLocal to perform the
additional conversions.
Having created the infrastructure to do that, we can use the same code to
map certain linearly-related subranges of the Unicode space below U+FFFF,
allowing removal of the corresponding lookup table entries. This more
than halves the lookup table size, which is a substantial savings;
utf8_and_gb18030.so drops from nearly a megabyte to about half that.
In support of doing that, replace ISO10646-GB18030.TXT with the data file
gb-18030-2000.xml (retrieved from
http://source.icu-project.org/repos/icu/data/trunk/charset/data/xml/ )
in which these subranges have been deleted from the simple lookup entries.
Per bug #12845 from Arjen Nienhuis. The conversion code added here is
based on his proposed patch, though I whacked it around rather heavily.
Add a TABLESAMPLE clause to SELECT statements that allows
user to specify random BERNOULLI sampling or block level
SYSTEM sampling. Implementation allows for extensible
sampling functions to be written, using a standard API.
Basic version follows SQLStandard exactly. Usable
concrete use cases for the sampling API follow in later
commits.
Petr Jelinek
Reviewed by Michael Paquier and Simon Riggs
We can only support a lossy distance function when the distance function's
datatype is comparable with the original ordering operator's datatype.
The distance function always returns a float8, so we are limited to float8,
and float4 (by a hard-coded cast of the float8 to float4).
In light of this limitation, it seems like a good idea to have a separate
'recheck' flag for the ORDER BY expressions, so that if you have a non-lossy
distance function, it still works with lossy quals. There are cases like
that with the build-in or contrib opclasses, but it's plausible.
There was a hidden assumption that the ORDER BY values returned by GiST
match the original ordering operator's return type, but there are plenty
of examples where that's not true, e.g. in btree_gist and pg_trgm. As long
as the distance function is not lossy, we can tolerate that and just not
return the distance to the executor (or rather, always return NULL). The
executor doesn't need the distances if there are no lossy results.
There was another little bug: the recheck variable was not initialized
before calling the distance function. That revealed the bigger issue,
as the executor tried to reorder tuples that didn't need reordering, and
that failed because of the datatype mismatch.
The previous coding effectively only verified that the second byte of a
multibyte character was in the expected range; moreover, it wasn't careful
to make sure that the second byte even exists in the buffer before touching
it. The latter seems unlikely to cause any real problems in the field
(in particular, it could never be a problem with null-terminated input),
but it's still a bug.
Since GB18030 is not a supported backend encoding, the only thing we'd
really be doing with GB18030 text is converting it to UTF8 in LocalToUtf,
which would fail anyway on any invalid character for lack of a match in
its lookup table. So the only user-visible consequence of this change
should be that you'll get "invalid byte sequence for encoding" rather than
"character has no equivalent" for malformed GB18030 input. However,
impending changes to the GB18030 conversion code will require these tighter
up-front checks to avoid producing bogus results.
The distance function can now set *recheck = false, like index quals. The
executor will then re-check the ORDER BY expressions, and use a queue to
reorder the results on the fly.
This makes it possible to do kNN-searches on polygons and circles, which
don't store the exact value in the index, but just a bounding box.
Alexander Korotkov and me
When this option is specified, a progress report is printed as each index
is reindexed.
Per discussion, we agreed on the following syntax for the extensibility of
the options.
REINDEX (flexible options) { INDEX | ... } name
Sawada Masahiko.
Reviewed by Robert Haas, Fabrízio Mello, Alvaro Herrera, Kyotaro Horiguchi,
Jim Nasby and me.
Discussion: CAD21AoA0pK3YcOZAFzMae+2fcc3oGp5zoRggDyMNg5zoaWDhdQ@mail.gmail.com
Until now, these functions have only supported encoding conversions using
lookup tables, which is fine as long as there's not too many code points
to convert. However, GB18030 expects all 1.1 million Unicode code points
to be convertible, which would require a ridiculously-sized lookup table.
Fortunately, a large fraction of those conversions can be expressed through
arithmetic, ie the conversions are one-to-one in certain defined ranges.
To support that, provide a callback function that is used after consulting
the lookup tables. (This patch doesn't actually change anything about the
GB18030 conversion behavior, just provide infrastructure for fixing it.)
Since this requires changing the APIs of UtfToLocal/LocalToUtf anyway,
take the opportunity to rearrange their argument lists into what seems
to me a saner order. And beautify the call sites by using lengthof()
instead of error-prone sizeof() arithmetic.
In passing, also mark all the lookup tables used by these calls "const".
This moves an impressive amount of stuff into the text segment, at least
on my machine, and is safer anyhow.
This patch introduces the ability for complex datatypes to have an
in-memory representation that is different from their on-disk format.
On-disk formats are typically optimized for minimal size, and in any case
they can't contain pointers, so they are often not well-suited for
computation. Now a datatype can invent an "expanded" in-memory format
that is better suited for its operations, and then pass that around among
the C functions that operate on the datatype. There are also provisions
(rudimentary as yet) to allow an expanded object to be modified in-place
under suitable conditions, so that operations like assignment to an element
of an array need not involve copying the entire array.
The initial application for this feature is arrays, but it is not hard
to foresee using it for other container types like JSON, XML and hstore.
I have hopes that it will be useful to PostGIS as well.
In this initial implementation, a few heuristics have been hard-wired
into plpgsql to improve performance for arrays that are stored in
plpgsql variables. We would like to generalize those hacks so that
other datatypes can obtain similar improvements, but figuring out some
appropriate APIs is left as a task for future work. (The heuristics
themselves are probably not optimal yet, either, as they sometimes
force expansion of arrays that would be better left alone.)
Preliminary performance testing shows impressive speed gains for plpgsql
functions that do element-by-element access or update of large arrays.
There are other cases that get a little slower, as a result of added array
format conversions; but we can hope to improve anything that's annoyingly
bad. In any case most applications should see a net win.
Tom Lane, reviewed by Andres Freund
If a postgres_fdw foreign table is a non-locked source relation in an
UPDATE, DELETE, or SELECT FOR UPDATE/SHARE, and the query selects its
ctid column, the wrong value would be returned if an EvalPlanQual
recheck occurred. This happened because the foreign table's result row
was copied via the ROW_MARK_COPY code path, and EvalPlanQualFetchRowMarks
just unconditionally set the reconstructed tuple's t_self to "invalid".
To fix that, we can have EvalPlanQualFetchRowMarks copy the composite
datum's t_ctid field, and be sure to initialize that along with t_self
when postgres_fdw constructs a tuple to return.
If we just did that much then EvalPlanQualFetchRowMarks would start
returning "(0,0)" as ctid for all other ROW_MARK_COPY cases, which perhaps
does not matter much, but then again maybe it might. The cause of that is
that heap_form_tuple, which is the ultimate source of all composite datums,
simply leaves t_ctid as zeroes in newly constructed tuples. That seems
like a bad idea on general principles: a field that's really not been
initialized shouldn't appear to have a valid value. So let's eat the
trivial additional overhead of doing "ItemPointerSetInvalid(&(td->t_ctid))"
in heap_form_tuple.
This closes out our handling of Etsuro Fujita's report that tableoid and
ctid weren't correctly set in postgres_fdw EvalPlanQual cases. Along the
way we did a great deal of work to improve FDWs' ability to control row
locking behavior; which was not wasted effort by any means, but it didn't
end up being a fix for this problem because that feature would be too
expensive for postgres_fdw to use all the time.
Although the fix for the tableoid misbehavior was back-patched, I'm
hesitant to do so here; it seems far less likely that people would care
about remote ctid than tableoid, and even such a minor behavioral change
as this in heap_form_tuple is perhaps best not back-patched. So commit
to HEAD only, at least for the moment.
Etsuro Fujita, with some adjustments by me
These operations now error out if attempted on scalars, and simply
return the input if attempted on empty arrays or objects. Along the way
we remove the unnecessary cloning of the input when it's known to be
unchanged. Regression tests covering these cases are added.
Specifically the tlist and rti of the pseudo "excluded" relation weren't
properly treated by expression_tree_walker, which lead to errors when
excluded was referenced inside a rule because the varnos where not
properly adjusted. Similar omissions in OffsetVarNodes and
expression_tree_mutator had less impact, but should obviously be fixed
nonetheless.
A couple tests of for ON CONFLICT UPDATE into INSERT rule bearing
relations have been added.
In passing I updated a couple comments.
jsonb_pretty(jsonb) produces nicely indented json output.
jsonb || jsonb concatenates two jsonb values.
jsonb - text removes a key and its associated value from the json
jsonb - int removes the designated array element
jsonb - text[] removes a key and associated value or array element at
the designated path
jsonb_replace(jsonb,text[],jsonb) replaces the array element designated
by the path or the value associated with the key designated by the path
with the given value.
Original work by Dmitry Dolgov, adapted and reworked for PostgreSQL core
by Andrew Dunstan, reviewed and tidied up by Petr Jelinek.
Previously, FDWs could only do "early row locking", that is lock a row as
soon as it's fetched, even though local restriction/join conditions might
discard the row later. This patch adds callbacks that allow FDWs to do
late locking in the same way that it's done for regular tables.
To make use of this feature, an FDW must support the "ctid" column as a
unique row identifier. Currently, since ctid has to be of type TID,
the feature is of limited use, though in principle it could be used by
postgres_fdw. We may eventually allow FDWs to specify another data type
for ctid, which would make it possible for more FDWs to use this feature.
This commit does not modify postgres_fdw to use late locking. We've
tested some prototype code for that, but it's not in committable shape,
and besides it's quite unclear whether it actually makes sense to do late
locking against a remote server. The extra round trips required are likely
to outweigh any benefit from improved concurrency.
Etsuro Fujita, reviewed by Ashutosh Bapat, and hacked up a lot by me
Windows can't reliably restore symbolic links from a tar format, so
instead during backup start we create a tablespace_map file, which is
used by the restoring postgres to create the correct links in pg_tblspc.
The backup protocol also now has an option to request this file to be
included in the backup stream, and this is used by pg_basebackup when
operating in tar mode.
This is done on all platforms, not just Windows.
This means that pg_basebackup will not not work in tar mode against 9.4
and older servers, as this protocol option isn't implemented there.
Amit Kapila, reviewed by Dilip Kumar, with a little editing from me.
This feature lets user code inspect and take action on DDL events.
Whenever a ddl_command_end event trigger is installed, DDL actions
executed are saved to a list which can be inspected during execution of
a function attached to ddl_command_end.
The set-returning function pg_event_trigger_ddl_commands can be used to
list actions so captured; it returns data about the type of command
executed, as well as the affected object. This is sufficient for many
uses of this feature. For the cases where it is not, we also provide a
"command" column of a new pseudo-type pg_ddl_command, which is a
pointer to a C structure that can be accessed by C code. The struct
contains all the info necessary to completely inspect and even
reconstruct the executed command.
There is no actual deparse code here; that's expected to come later.
What we have is enough infrastructure that the deparsing can be done in
an external extension. The intention is that we will add some deparsing
code in a later release, as an in-core extension.
A new test module is included. It's probably insufficient as is, but it
should be sufficient as a starting point for a more complete and
future-proof approach.
Authors: Álvaro Herrera, with some help from Andres Freund, Ian Barwick,
Abhijit Menon-Sen.
Reviews by Andres Freund, Robert Haas, Amit Kapila, Michael Paquier,
Craig Ringer, David Steele.
Additional input from Chris Browne, Dimitri Fontaine, Stephen Frost,
Petr Jelínek, Tom Lane, Jim Nasby, Steven Singer, Pavel Stěhule.
Based on original work by Dimitri Fontaine, though I didn't use his
code.
Discussion:
https://www.postgresql.org/message-id/m2txrsdzxa.fsf@2ndQuadrant.frhttps://www.postgresql.org/message-id/20131108153322.GU5809@eldon.alvh.no-ip.orghttps://www.postgresql.org/message-id/20150215044814.GL3391@alvh.no-ip.org
INSERT acquires RowExclusiveLock during normal operation and therefore
it makes sense to allow LOCK TABLE .. ROW EXCLUSIVE MODE to be executed
by users who have INSERT rights on a table (even if they don't have
UPDATE or DELETE).
Not back-patching this as it's a behavior change which, strictly
speaking, loosens security restrictions.
Per discussion with Tom and Robert (circa 2013).
If a row that potentially violates a deferred exclusion constraint is
HOT-updated later in the same transaction, the exclusion constraint would
be reported as violated when the check finally occurs, even if the row(s)
the new row originally conflicted with have since been removed. This
happened because the wrong TID was passed to check_exclusion_constraint(),
causing the live HOT-updated row to be seen as a conflicting row rather
than recognized as the row-under-test.
Per bug #13148 from Evan Martin. It's been broken since exclusion
constraints were invented, so back-patch to all supported branches.
Analysis by Noah Misch shows that the 25% threshold set by commit
53bb309d2d is lower than any other,
similar autovac threshold. While we don't know exactly what value
will be optimal for all users, it is better to err a little on the
high side than on the low side. A higher value increases the risk
that users might exhaust the available space and start seeing errors
before autovacuum can clean things up sufficiently, but a user who
hits that problem can compensate for it by reducing
autovacuum_multixact_freeze_max_age to a value dependent on their
average multixact size. On the flip side, if the emergency cap
imposed by that patch kicks in too early, the user will experience
excessive wraparound scanning and will be unable to mitigate that
problem by configuration. The new value will hopefully reduce the
risk of such bad experiences while still providing enough headroom
to avoid multixact member exhaustion for most users.
Along the way, adjust the documentation to reflect the effects of
commit 04e6d3b877, which taught
autovacuum to run for multixact wraparound even when autovacuum
is configured off.
Commit b69bf30b9b advanced the stop point
at vacuum time, but this has subsequently been shown to be unsafe as a
result of analysis by myself and Thomas Munro and testing by Thomas
Munro. The crux of the problem is that the SLRU deletion logic may
get confused about what to remove if, at exactly the right time during
the checkpoint process, the head of the SLRU crosses what used to be
the tail.
This patch, by me, fixes the problem by advancing the stop point only
following a checkpoint. This has the additional advantage of making
the removal logic work during recovery more like the way it works during
normal running, which is probably good.
At least one of the calls to DetermineSafeOldestOffset which this patch
removes was already dead, because MultiXactAdvanceOldest is called only
during recovery and DetermineSafeOldestOffset was set up to do nothing
during recovery. That, however, is inconsistent with the principle that
recovery and normal running should work similarly, and was confusing to
boot.
Along the way, fix some comments that previous patches in this area
neglected to update. It's not clear to me whether there's any
concrete basis for the decision to use only half of the multixact ID
space, but it's neither necessary nor sufficient to prevent multixact
member wraparound, so the comments should not say otherwise.
Commit b69bf30b9b failed to take into
account the possibility that there might be no multixacts in existence
at all.
Report by Thomas Munro; patch by me.
Commit e7cb7ee145 included some design
decisions that seem pretty questionable to me, and there was quite a lot
of stuff not to like about the documentation and comments. Clean up
as follows:
* Consider foreign joins only between foreign tables on the same server,
rather than between any two foreign tables with the same underlying FDW
handler function. In most if not all cases, the FDW would simply have had
to apply the same-server restriction itself (far more expensively, both for
lack of caching and because it would be repeated for each combination of
input sub-joins), or else risk nasty bugs. Anyone who's really intent on
doing something outside this restriction can always use the
set_join_pathlist_hook.
* Rename fdw_ps_tlist/custom_ps_tlist to fdw_scan_tlist/custom_scan_tlist
to better reflect what they're for, and allow these custom scan tlists
to be used even for base relations.
* Change make_foreignscan() API to include passing the fdw_scan_tlist
value, since the FDW is required to set that. Backwards compatibility
doesn't seem like an adequate reason to expect FDWs to set it in some
ad-hoc extra step, and anyway existing FDWs can just pass NIL.
* Change the API of path-generating subroutines of add_paths_to_joinrel,
and in particular that of GetForeignJoinPaths and set_join_pathlist_hook,
so that various less-used parameters are passed in a struct rather than
as separate parameter-list entries. The objective here is to reduce the
probability that future additions to those parameter lists will result in
source-level API breaks for users of these hooks. It's possible that this
is even a small win for the core code, since most CPU architectures can't
pass more than half a dozen parameters efficiently anyway. I kept root,
joinrel, outerrel, innerrel, and jointype as separate parameters to reduce
code churn in joinpath.c --- in particular, putting jointype into the
struct would have been problematic because of the subroutines' habit of
changing their local copies of that variable.
* Avoid ad-hocery in ExecAssignScanProjectionInfo. It was probably all
right for it to know about IndexOnlyScan, but if the list is to grow
we should refactor the knowledge out to the callers.
* Restore nodeForeignscan.c's previous use of the relcache to avoid
extra GetFdwRoutine lookups for base-relation scans.
* Lots of cleanup of documentation and missed comments. Re-order some
code additions into more logical places.
The new type has the scope of whole the database cluster so it doesn't
behave the same as the existing OID alias types which have database
scope,
concerning object dependency. To avoid confusion constants of the new
type are prohibited from appearing where dependencies are made involving
it.
Also, add a note to the docs about possible MVCC violation and
optimization issues, which are general over the all reg* types.
Kyotaro Horiguchi
The head_p and tail_p pointers passed to ParseConfigFp() are actually
input/output parameters, not strictly output paramaters. This updates
the function comment to reflect that.
Per discussion with Tom.
The default behavior for GSS and SSPI authentication methods has long
been to strip the realm off of the principal, however, this is not a
secure approach in multi-realm environments and the use-case for the
parameter at all has been superseded by the regex-based mapping support
available in pg_ident.conf.
Change the default for include_realm to be '1', meaning that we do
NOT remove the realm from the principal by default. Any installations
which depend on the existing behavior will need to update their
configurations (ideally by leaving include_realm set to 1 and adding a
mapping in pg_ident.conf, but alternatively by explicitly setting
include_realm=0 prior to upgrading). Note that the mapping capability
exists in all currently supported versions of PostgreSQL and so this
change can be done today. Barring that, existing users can update their
configurations today to explicitly set include_realm=0 to ensure that
the prior behavior is maintained when they upgrade.
This needs to be noted in the release notes.
Per discussion with Magnus and Peter.
This updates pg_stat_get_activity() to build a tuplestore for its
results instead of using the old-style multiple-call method. This
simplifies the function, though that wasn't the primary motivation for
the change, which is that we may turn it into a helper function which
can filter the results (or not) much more easily.
The function and view added here provide a way to look at all settings
in postgresql.conf, any #include'd files, and postgresql.auto.conf
(which is what backs the ALTER SYSTEM command).
The information returned includes the configuration file name, line
number in that file, sequence number indicating when the parameter is
loaded (useful to see if it is later masked by another definition of the
same parameter), parameter name, and what it is set to at that point.
This information is updated on reload of the server.
This is unfiltered, privileged, information and therefore access is
restricted to superusers through the GRANT system.
Author: Sawada Masahiko, various improvements by me.
Reviewers: David Steele
The first is a pretty simple bug where a relcache entry is used after
the relation is closed. In this particular situation it does not appear
to have bad consequences unless compiled with RELCACHE_FORCE_RELEASE.
The second is that infer_arbiter_indexes() skipped indexes that aren't
yet valid according to indcheckxmin. That's not required here, because
uniqueness checks don't care about visibility according to an older
snapshot. While thats not really a bug, it makes things undesirably
non-deterministic. There is some hope that this explains a test failure
on buildfarm member jaguarundi.
Discussion: 9096.1431102730@sss.pgh.pa.us
Previously, we would archive the possible-incomplete WAL segment with its
normal filename, but that causes trouble if the server owning that timeline
is still running, and tries to archive the same segment later. It's not nice
for the standby to trip up the master's archival like that. And it's pretty
confusing, anyway, to have an incomplete segment in the archive that's
indistinguishable from a normal, complete segment.
To avoid such confusion, add a .partial suffix to the file. Or to be more
precise, make a copy of the old segment under the .partial suffix, and
archive that instead of the original file. pg_receivexlog also uses the
.partial suffix for the same purpose, to tell apart incompletely streamed
files from complete ones.
There is no automatic mechanism to use the .partial files at recovery, so
they will go unused, unless the administrator manually copies to them to
the pg_xlog directory (and removes the .partial suffix). Recovery won't
normally need the WAL - when recovering to the new timeline, it will find
the same WAL on the first segment on the new timeline instead - but it
nevertheless feels better to archive the file with the .partial suffix, for
debugging purposes if nothing else.
The logic introduced in commit b69bf30b9b
and repaired in commits 669c7d20e6 and
7be47c56af helps to ensure that we don't
overwrite old multixact member information while it is still needed,
but a user who creates many large multixacts can still exhaust the
member space (and thus start getting errors) while autovacuum stands
idly by.
To fix this, progressively ramp down the effective value (but not the
actual contents) of autovacuum_multixact_freeze_max_age as member space
utilization increases. This makes autovacuum more aggressive and also
reduces the threshold for a manual VACUUM to perform a full-table scan.
This patch leaves unsolved the problem of ensuring that emergency
autovacuums are triggered even when autovacuum=off. We'll need to fix
that via a separate patch.
Thomas Munro and Robert Haas
The newly added ON CONFLICT clause allows to specify an alternative to
raising a unique or exclusion constraint violation error when inserting.
ON CONFLICT refers to constraints that can either be specified using a
inference clause (by specifying the columns of a unique constraint) or
by naming a unique or exclusion constraint. DO NOTHING avoids the
constraint violation, without touching the pre-existing row. DO UPDATE
SET ... [WHERE ...] updates the pre-existing tuple, and has access to
both the tuple proposed for insertion and the existing tuple; the
optional WHERE clause can be used to prevent an update from being
executed. The UPDATE SET and WHERE clauses have access to the tuple
proposed for insertion using the "magic" EXCLUDED alias, and to the
pre-existing tuple using the table name or its alias.
This feature is often referred to as upsert.
This is implemented using a new infrastructure called "speculative
insertion". It is an optimistic variant of regular insertion that first
does a pre-check for existing tuples and then attempts an insert. If a
violating tuple was inserted concurrently, the speculatively inserted
tuple is deleted and a new attempt is made. If the pre-check finds a
matching tuple the alternative DO NOTHING or DO UPDATE action is taken.
If the insertion succeeds without detecting a conflict, the tuple is
deemed inserted.
To handle the possible ambiguity between the excluded alias and a table
named excluded, and for convenience with long relation names, INSERT
INTO now can alias its target table.
Bumps catversion as stored rules change.
Author: Peter Geoghegan, with significant contributions from Heikki
Linnakangas and Andres Freund. Testing infrastructure by Jeff Janes.
Reviewed-By: Heikki Linnakangas, Andres Freund, Robert Haas, Simon Riggs,
Dean Rasheed, Stephen Frost and many others.
Previously, relation range table entries used a single Bitmapset field
representing which columns required either UPDATE or INSERT privileges,
despite the fact that INSERT and UPDATE privileges are separately
cataloged, and may be independently held. As statements so far required
either insert or update privileges but never both, that was
sufficient. The required permission could be inferred from the top level
statement run.
The upcoming INSERT ... ON CONFLICT UPDATE feature needs to
independently check for both privileges in one statement though, so that
is not sufficient anymore.
Bumps catversion as stored rules change.
Author: Peter Geoghegan
Reviewed-By: Andres Freund
The minmax opclass was using the wrong support functions when
cross-datatypes queries were run. Instead of trying to fix the
pg_amproc definitions (which apparently is not possible), use the
already correct pg_amop entries instead. This requires jumping through
more hoops (read: extra syscache lookups) to obtain the underlying
functions to execute, but it is necessary for correctness.
Author: Emre Hasegeli, tweaked by Álvaro
Review: Andreas Karlsson
Also change BrinOpcInfo to record each stored type's typecache entry
instead of just the OID. Turns out that the full type cache is
necessary in brin_deform_tuple: the original code used the indexed
type's byval and typlen properties to extract the stored tuple, which is
correct in Minmax; but in other implementations that want to store
something different, that's wrong. The realization that this is a bug
comes from Emre also, but I did not use his patch.
I also adopted Emre's regression test code (with smallish changes),
which is more complete.
The old formula didn't have enough parentheses, so it would do the wrong
thing, and it used / rather than % to find a remainder. The effect of
these oversights is that the stop point chosen by the logic introduced in
commit b69bf30b9b might be rather
meaningless.
Thomas Munro, reviewed by Kevin Grittner, with a whitespace tweak by me.
This commit adds the following functions:
box(point) -> box
bound_box(box, box) -> box
inet_same_family(inet, inet) -> bool
inet_merge(inet, inet) -> cidr
range_merge(anyrange, anyrange) -> anyrange
The first of these is also used to implement a new assignment cast from
point to box.
These functions are the first part of a base to implement an "inclusion"
operator class for BRIN, for multidimensional data types.
Author: Emre Hasegeli
Reviewed by: Andreas Karlsson
pg_win32_is_junction() was a typo for pgwin32_is_junction(). open()
was used not only in a two-argument form, which breaks on Windows,
but also where BasicOpenFile() should have been used.
Per reports from Andrew Dunstan and David Rowley.
This makes the executor code more consistent. It also removes
an apparently superfluous NULL test in nodeGroup.c.
Qingqing Zhou, reviewed by Tom Lane, and further revised by me.
Otherwise, if there's another crash, some writes from after the first
crash might make it to disk while writes from before the crash fail
to make it to disk. This could lead to data corruption.
Back-patch to all supported versions.
Abhijit Menon-Sen, reviewed by Andres Freund and slightly revised
by me.
The first bug is not releasing a tupdesc when doing an early return out
of the function. The second bug is a logic error in choosing when to do
an early return if given an empty jsonb object.
Bug reports from Pavel Stehule and Tom Lane respectively.
Backpatch to 9.4 where these were introduced.
Commit ef3f9e642d suppressed one cause of warnings here, but
recent clang on OS X is still unhappy because we're passing a "long"
to abs(). The fact that tm_gmtoff is declared as long is no doubt a
hangover from days when int might be only 16 bits; but Postgres has
never been able to run on such machines, so we can just cast it to int
with no worries. For consistency, also cast to int in the other
uses of tm_gmtoff in this stanza.
Note: this code is still broken on machines that don't follow C99
integer-division-truncates-towards-zero rules. Given the lack of
complaints about it, I don't feel a large desire to complicate things
enough to cope with the pre-C99 rules.
When altering the deferredness state of a foreign key constraint, we
correctly updated the catalogs and then invalidated the relcache state for
the target relation ... but that's not the only relation with relevant
triggers. Must invalidate the other table as well, or the state change
fails to take effect promptly for operations triggered on the other table.
Per bug #13224 from Christian Ullrich.
In passing, reorganize regression test case for this feature so that it
isn't randomly injected into the middle of an unrelated test sequence.
Oversight in commit f177cbfe67. Back-patch
to 9.4 where the faulty code was added.
coerce_type() has local variables named targetTypeId, baseTypeId, and
targetType. targetType has been the Type structure for baseTypeId, so
rename it to baseType.
Tom Lane pointed out that this wasn't done, and asked whether that was
intentional. Subsequent discussion was in favor of making the change,
so here we go.
Foreign data wrappers can use this capability for so-called "join
pushdown"; that is, instead of executing two separate foreign scans
and then joining the results locally, they can generate a path which
performs the join on the remote server and then is scanned locally.
This commit does not extend postgres_fdw to take advantage of this
capability; it just provides the infrastructure.
Custom scan providers can use this in a similar way. Previously,
it was only possible for a custom scan provider to scan a single
relation. Now, it can scan an entire join tree, provided of course
that it knows how to produce the same results that the join would
have produced if executed normally.
KaiGai Kohei, reviewed by Shigeru Hanada, Ashutosh Bapat, and me.
ParseCommitRecord() accessed xl_xact_origin directly. But the chunks in
the commit record's data only have 4 byte alignment, whereas
xl_xact_origin's members require 8 byte alignment on some
platforms. Update comments to make not of that and copy the record to
stack local storage before reading.
With help from Stefan Kaltenbrunner in pinning down the buildfarm and
verifying the fix.
In commit 31eae6028e, some documents were not updated to show the new
capability; fix that. Also, the error message you get when CURRENT_USER
and SESSION_USER are used in a context that doesn't accept them could be
clearer about it being a problem only in those contexts; so add the
word "here".
Author: Kyotaro HORIGUCHI
His patch submission also included changes to GRANT/REVOKE, but those
seemed more controversial, so I left them out. We can reconsider these
changes later.
This does four basic things. First, it provides convenience routines
to coordinate the startup and shutdown of parallel workers. Second,
it synchronizes various pieces of state (e.g. GUCs, combo CID
mappings, transaction snapshot) from the parallel group leader to the
worker processes. Third, it prohibits various operations that would
result in unsafe changes to that state while parallelism is active.
Finally, it propagates events that would result in an ErrorResponse,
NoticeResponse, or NotifyResponse message being sent to the client
from the parallel workers back to the master, from which they can then
be sent on to the client.
Robert Haas, Amit Kapila, Noah Misch, Rushabh Lathia, Jeevan Chalke.
Suggestions and review from Andres Freund, Heikki Linnakangas, Noah
Misch, Simon Riggs, Euler Taveira, and Jim Nasby.
We need to create the pg_multixact/offsets file deleted by pg_upgrade
much earlier than we originally were: it was in TrimMultiXact(), which
runs after we exit recovery, but it actually needs to run earlier than
the first call to SetMultiXactIdLimit (before recovery), because that
routine already wants to read the first offset segment.
Per pg_upgrade trouble report from Jeff Janes.
While at it, silence a compiler warning about a pointless assert that an
unsigned variable was being tested non-negative. This was a signed
constant in Thomas Munro's patch which I changed to unsigned before
commit. Pointed out by Andres Freund.
When this code was written, catalog scans were normally performed using
SnapshotNow, making special handling necessary here. Now, however, all
catalog scans use MVCC snapshots, so we can change these cases to look
more like what we do for catalog scans elsewhere in the code.
Per discussion with Tom Lane and a reminder from Bruce Momjian.
When implementing a replication solution ontop of logical decoding, two
related problems exist:
* How to safely keep track of replication progress
* How to change replication behavior, based on the origin of a row;
e.g. to avoid loops in bi-directional replication setups
The solution to these problems, as implemented here, consist out of
three parts:
1) 'replication origins', which identify nodes in a replication setup.
2) 'replication progress tracking', which remembers, for each
replication origin, how far replay has progressed in a efficient and
crash safe manner.
3) The ability to filter out changes performed on the behest of a
replication origin during logical decoding; this allows complex
replication topologies. E.g. by filtering all replayed changes out.
Most of this could also be implemented in "userspace", e.g. by inserting
additional rows contain origin information, but that ends up being much
less efficient and more complicated. We don't want to require various
replication solutions to reimplement logic for this independently. The
infrastructure is intended to be generic enough to be reusable.
This infrastructure also replaces the 'nodeid' infrastructure of commit
timestamps. It is intended to provide all the former capabilities,
except that there's only 2^16 different origins; but now they integrate
with logical decoding. Additionally more functionality is accessible via
SQL. Since the commit timestamp infrastructure has also been introduced
in 9.5 (commit 73c986add) changing the API is not a problem.
For now the number of origins for which the replication progress can be
tracked simultaneously is determined by the max_replication_slots
GUC. That GUC is not a perfect match to configure this, but there
doesn't seem to be sufficient reason to introduce a separate new one.
Bumps both catversion and wal page magic.
Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer
Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer
Discussion: 20150216002155.GI15326@awork2.anarazel.de,
20140923182422.GA15776@alap3.anarazel.de,
20131114172632.GE7522@alap2.anarazel.de
I thought I'd gone through all of these before, but a fresh review found
this one too. (Perhaps it would be better to just delete this test and
let the failure occur later, but for the moment I'll preserve the logic.)
The case that this was rejecting is like
CREATE FOREIGN TABLE ft (f1 int ...) ...;
CREATE TABLE c1 (UNIQUE(f1)) INHERITS(ft);
This is necessary in view of the changes to allow foreign tables to be
full members of inheritance hierarchies, but I (tgl) unaccountably missed
it in commit cb1ca4d800.
Noted by Amit Langote, patch by Etsuro Fujita
Multixact member files are subject to early wraparound overflow and
removal: if the average multixact size is above a certain threshold (see
note below) the protections against offset overflow are not enough:
during multixact truncation at checkpoint time, some
pg_multixact/members files would be removed because the server considers
them to be old and not needed anymore. This leads to loss of files that
are critical to interpret existing tuples's Xmax values.
To protect against this, since we don't have enough info in pg_control
and we can't modify it in old branches, we maintain shared memory state
about the oldest value that we need to keep; we use this during new
multixact creation to abort if an old still-needed file would get
overwritten. This value is kept up to date by checkpoints, which makes
it not completely accurate but should be good enough. We start emitting
warnings sometime earlier, so that the eventual multixact-shutdown
doesn't take DBAs completely by surprise (more precisely: once 20
members SLRU segments are remaining before shutdown.)
On troublesome average multixact size: The threshold size depends on the
multixact freeze parameters. The oldest age is related to the greater of
multixact_freeze_table_age and multixact_freeze_min_age: anything
older than that should be removed promptly by autovacuum. If autovacuum
is keeping up with multixact freezing, the troublesome multixact average
size is
(2^32-1) / Max(freeze table age, freeze min age)
or around 28 members per multixact. Having an average multixact size
larger than that will eventually cause new multixact data to overwrite
the data area for older multixacts. (If autovacuum is not able to keep
up, or there are errors in vacuuming, the actual maximum is
multixact_freeeze_max_age instead, at which point multixact generation
is stopped completely. The default value for this limit is 400 million,
which means that the multixact size that would cause trouble is about 10
members).
Initial bug report by Timothy Garnett, bug #12990
Backpatch to 9.3, where the problem was introduced.
Authors: Álvaro Herrera, Thomas Munro
Reviews: Thomas Munro, Amit Kapila, Robert Haas, Kevin Grittner
Some operating systems, including the reporter's windows, return EBADFD
or similar when fsync() is invoked on a O_RDONLY file descriptor.
Unfortunately RestoreSlotFromDisk() does exactly that; which causes
failures after restarts in at least some scenarios.
If you hit the bug the error message will be something like
ERROR: could not fsync file "pg_replslot/$name/state": Bad file descriptor
Simply use O_RDWR instead of O_RDONLY when opening the relevant file
descriptor to fix the bug. Unfortunately I have no way of verifying the
fix, but we've seen similar problems in the past.
This bug goes back to 9.4 where slots were introduced. Backpatch
accordingly.
Reported-By: Patrice Drolet
Bug: #13143:
Discussion: 20150424101006.2556.60897@wrigleys.postgresql.org
The original security barrier view implementation, on which RLS is
built, prevented all non-leakproof functions from being pushed down to
below the view, even when the function was not receiving any data from
the view. This optimization improves on that situation by, instead of
checking strictly for non-leakproof functions, it checks for Vars being
passed to non-leakproof functions and allows functions which do not
accept arguments or whose arguments are not from the current query level
(eg: constants can be particularly useful) to be pushed down.
As discussed, this does mean that a function which is pushed down might
gain some idea that there are rows meeting a certain criteria based on
the number of times the function is called, but this isn't a
particularly new issue and the documentation in rules.sgml already
addressed similar covert-channel risks. That documentation is updated
to reflect that non-leakproof functions may be pushed down now, if
they meet the above-described criteria.
Author: Dean Rasheed, with a bit of rework to make things clearer,
along with comment and documentation updates from me.
Since both forms are arguably legal I wasn't sure about changing
this. But then Tom argued for 'therefore'...
Author: Dmitriy Olshevskiy
Discussion: 34789.1430067832@sss.pgh.pa.us
This provides a mechanism for specifying conversions between SQL data
types and procedural languages. As examples, there are transforms
for hstore and ltree for PL/Perl and PL/Python.
reviews by Pavel Stěhule and Andres Freund
pg_dump has historically assumed that default_with_oids affects only plain
tables and not other relkinds. Conceivably we could make it apply to some
newly invented relkind if we did so from the get-go, but changing the
behavior for existing object types will break existing dump scripts.
Add code comments warning about this interaction.
Also, make sure that default_with_oids doesn't cause parse_utilcmd.c to
think that CREATE FOREIGN TABLE will create an OID column. I think this is
only a latent bug right now, since we don't allow UNIQUE/PKEY constraints
in CREATE FOREIGN TABLE, but it's better to be consistent and future-proof.
An outer join appearing within the RHS of an antijoin can't commute with
the antijoin, but somehow I missed teaching make_outerjoininfo() about
that. In Teodor Sigaev's recent trouble report, this manifests as a
"could not find RelOptInfo for given relids" error within eqjoinsel();
but I think silently wrong query results are possible too, if the planner
misorders the joins and doesn't happen to trigger any internal consistency
checks. It's broken as far back as we had antijoins, so back-patch to all
supported branches.
The RLS capability is built on top of the WITH CHECK OPTION
system which was added for auto-updatable views, however, unlike
WCOs on views (which are mandated by the SQL spec to not fire until
after all other constraints and checks are done), it makes much more
sense for RLS checks to happen earlier than constraint and uniqueness
checks.
This patch reworks the structure which holds the WCOs a bit to be
explicitly either VIEW or RLS checks and the RLS-related checks are
done prior to the constraint and uniqueness checks. This also allows
better error reporting as we are now reporting when a violation is due
to a WITH CHECK OPTION and when it's due to an RLS policy violation,
which was independently noted by Craig Ringer as being confusing.
The documentation is also updated to include a paragraph about when RLS
WITH CHECK handling is performed, as there have been a number of
questions regarding that and the documentation was previously silent on
the matter.
Author: Dean Rasheed, with some kabitzing and comment changes by me.
The cross-reference to set_append_rel_pathlist() was obsoleted by
commit e2fa76d80b, which split what
had been set_rel_pathlist() and child routines into two sets of
functions. But I (tgl) evidently missed updating this comment.
Back-patch to 9.2 to avoid unnecessary divergence among branches.
Amit Langote
In get_row_security_policies(), we need to make a copy of the relation
name when building the WithCheckOptions structure, since
RelationGetRelationName just returns a pointer into the local Relation
structure. The relation name in the WCO structure is only used for
error reporting.
Pointed out by Robert and Christian Ullrich, who noted that the
buildfarm members with -DCLOBBER_CACHE_ALWAYS were failing.
When the startup process recovers transactions by scanning pg_twophase
directory, it should clear MyLockedGxact after it's done processing each
transaction. Like we do during normal operation, at PREPARE TRANSACTION.
Otherwise, if the startup process exits due to an error, it will try to
clear the locking_backend field of the last recovered transaction. That's
usually harmless, but if the error happens in MarkAsPreparing, while
holding TwoPhaseStateLock, the shmem-exit hook will try to acquire
TwoPhaseStateLock again, and deadlock with itself.
This fixes bug #13128 reported by Grant McAlister. The bug was introduced
by commit bb38fb0d, so backpatch to all supported versions like that
commit.
Commit a2e35b53c3 neglected to update the type OID to use further
down in DefineType when TypeShellMake was changed to return
ObjectAddress instead of OID (it got it right in DefineRange, however.)
This resulted in an internal error message being issued when looking up
I/O functions.
Author: Michael Paquier
Also add Asserts() to a couple of other places to ensure that the type
OID being used is as expected.
In prepend_row_security_policies(), defaultDeny was always true, so if
there were any hook policies, the RLS policies on the table would just
get discarded. Fixed to start off with defaultDeny as false and then
properly set later if we detect that only the default deny policy exists
for the internal policies.
The infinite recursion detection in fireRIRrules() didn't properly
manage the activeRIRs list in the case of WCOs, so it would incorrectly
report infinite recusion if the same relation with RLS appeared more
than once in the rtable, for example "UPDATE t ... FROM t ...".
Further, the RLS expansion code in fireRIRrules() was handling RLS in
the main loop through the rtable, which lead to RTEs being visited twice
if they contained sublink subqueries, which
prepend_row_security_policies() attempted to handle by exiting early if
the RTE already had securityQuals. That doesn't work, however, since
if the query involved a security barrier view on top of a table with
RLS, the RTE would already have securityQuals (from the view) by the
time fireRIRrules() was invoked, and so the table's RLS policies would
be ignored. This is fixed in fireRIRrules() by handling RLS in a
separate loop at the end, after dealing with any other sublink
subqueries, thus ensuring that each RTE is only visited once for RLS
expansion.
The inheritance planner code didn't correctly handle non-target
relations with RLS, which would get turned into subqueries during
planning. Thus an update of the form "UPDATE t1 ... FROM t2 ..." where
t1 has inheritance and t2 has RLS quals would fail. Fix by making sure
to copy in and update the securityQuals when they exist for non-target
relations.
process_policies() was adding WCOs to non-target relations, which is
unnecessary, and could lead to a lot of wasted time in the rewriter and
the planner. Fix by only adding WCO policies when working on the result
relation. Also in process_policies, we should be copying the USING
policies to the WITH CHECK policies on a per-policy basis, fix by moving
the copying up into the per-policy loop.
Lastly, as noted by Dean, we were simply adding policies returned by the
hook provided to the list of quals being AND'd, meaning that they would
actually restrict records returned and there was no option to have
internal policies and hook-based policies work together permissively (as
all internal policies currently work). Instead, explicitly add support
for both permissive and restrictive policies by having a hook for each
and combining the results appropriately. To ensure this is all done
correctly, add a new test module (test_rls_hooks) to test the various
combinations of internal, permissive, and restrictive hook policies.
Largely from Dean Rasheed (thanks!):
CAEZATCVmFUfUOwwhnBTcgi6AquyjQ0-1fyKd0T3xBWJvn+xsFA@mail.gmail.com
Author: Dean Rasheed, though I added the new hooks and test module.
As noted by Etsuro Fujita [1] and Dean Rasheed[2],
cb1ca4d800 changed ExecBuildAuxRowMark()
to always look for the tableoid in the target list, but didn't also
change preprocess_targetlist() to always include the tableoid. This
resulted in errors with soon-to-be-added RLS with inheritance tests,
and errors when using inheritance with foreign tables.
Authors: Etsuro Fujita and Dean Rasheed (independently)
Minor word-smithing on the comments by me.
[1] 552CF0B6.8010006@lab.ntt.co.jp
[2] CAEZATCVmFUfUOwwhnBTcgi6AquyjQ0-1fyKd0T3xBWJvn+xsFA@mail.gmail.com
Right now it is visible whether a replication slot is active in any
session, but not in which. Adding the active_in column, containing the
pid of the backend having acquired the slot, makes it much easier to
associate pg_replication_slots entries with the corresponding
pg_stat_replication/pg_stat_activity row.
This should have been done from the start, but I (Andres) dropped the
ball there somehow.
Author: Craig Ringer, revised by me Discussion:
CAMsr+YFKgZca5_7_ouaMWxA5PneJC9LNViPzpDHusaPhU9pA7g@mail.gmail.com
The USING policies were not being checked for differences as the same
policy was being passed in to both sides of the equal(). This could
result in backends not realizing that a policy had been changed, if
none of the other attributes had been changed.
Fix by passing to equal() the policy1 and policy2 using quals for
comparison.
No need to back-patch as this is not yet released. Noticed while
testing changes to RLS proposed by Dean Rasheed.
Logical decoding set SnapshotData's regd_count field to avoid the
snapshot manager from prematurely freeing snapshots that are generated
by the decoding system. That was always an abuse of the field, as it was
never supposed to be used outside the snapshot manager. Commit 94028691
made snapshot manager's tracking of the snapshots smarter, and that scheme
fell apart. The snapshot manager got confused and hit the assertion, when
a snapshot that was marked with regd_count==1 was not found in the heap,
where the snapshot manager tracks registered the snapshots.
To fix, don't abuse the regd_count field like that. Logical decoding still
abuses the active_count field for similar purposes, but that's currently
harmless.
The assertion failure was first reported by Michael Paquier
After the WAL format changes, the calculation of the size of a checkpoint
record became incorrect. Instead of trying to fix the math, check that the
previous record, i.e. the xl_prev value that we'd write for the next
record, matches the last checkpoint's redo pointer. That way it's not
dependent on the size of the checkpoint record at all.
The old logic was actually slightly wrong all along: if the previous
checkpoint record crossed a page boundary, the page headers threw off the
record size calculation, and the checkpoint was not skipped. The new
checkpoint would not cross a page boundary, so this only resulted in at
most one extra checkpoint after the system became idle. The new logic fixes
that. (It's not worth fixing in backbranches).
However, it makes some sense to try to keep the latest checkpoint contained
fully in a page, or at least in a single WAL segment, just on general
robustness grounds. If something goes awfully wrong, it's more likely that
you can recover the latest WAL segment, than the last two WAL segments. So
I added an extra check that the checkpoint is not skipped if the previous
checkpoint crossed a WAL segment.
Reported by Jeff Janes.
Previously, these functions were created in a schema "binary_upgrade",
which was deleted after pg_upgrade was finished. Because we don't want
to keep that schema around permanently, move them to pg_catalog but
rename them with a binary_upgrade_... prefix.
The provided functions are only small wrappers around global variables
that were added specifically for pg_upgrade use, so keeping the module
separate does not create any modularity.
The functions still check that they are only called in binary upgrade
mode, so it is not possible to call these during normal operation.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
SLRU_SEGMENTS_PER_PAGE -> SLRU_PAGES_PER_SEGMENT
I introduced this ancient typo in subtrans.c and later propagated it to
multixact.c. I fixed the latter in f741300c, but only back to 9.3;
backpatch to all supported branches for consistency.
Now that we use CRC-32C in WAL and the control file, the "traditional" and
"legacy" CRC-32 variants are not used in any frontend programs anymore.
Move the code for those back from src/common to src/backend/utils/hash.
Also move the slicing-by-8 implementation (back) to src/port. This is in
preparation for next patch that will add another implementation that uses
Intel SSE 4.2 instructions to calculate CRC-32C, where available.
After a timeline switch, we would leave behind recycled WAL segments that
are in the future, but on the old timeline. After promotion, and after they
become old enough to be recycled again, we would notice that they don't have
a .ready or .done file, create a .ready file for them, and archive them.
That's bogus, because the files contain garbage, recycled from an older
timeline (or prealloced as zeros). We shouldn't archive such files.
This could happen when we're following a timeline switch during replay, or
when we switch to new timeline at end-of-recovery.
To fix, whenever we switch to a new timeline, scan the data directory for
WAL segments on the old timeline, but with a higher segment number, and
remove them. Those don't belong to our timeline history, and are most
likely bogus recycled or preallocated files. They could also be valid files
that we streamed from the primary ahead of time, but in any case, they're
not needed to recover to the new timeline.
This view shows information about all connections, such as if the
connection is using SSL, which cipher is used, and which client
certificate (if any) is used.
Reviews by Alex Shulgin, Heikki Linnakangas, Andres Freund & Michael Paquier
Locking and updating the same tuple repeatedly led to some strange
multixacts being created which had several subtransactions of the same
parent transaction holding locks of the same strength. However,
once a subxact of the current transaction holds a lock of a given
strength, it's not necessary to acquire the same lock again. This made
some coding patterns much slower than required.
The fix is twofold. First we change HeapTupleSatisfiesUpdate to return
HeapTupleBeingUpdated for the case where the current transaction is
already a single-xid locker for the given tuple; it used to return
HeapTupleMayBeUpdated for that case. The new logic is simpler, and the
change to pgrowlocks is a testament to that: previously we needed to
check for the single-xid locker separately in a very ugly way. That
test is simpler now.
As fallout from the HTSU change, some of its callers need to be amended
so that tuple-locked-by-own-transaction is taken into account in the
BeingUpdated case rather than the MayBeUpdated case. For many of them
there is no difference; but heap_delete() and heap_update now check
explicitely and do not grab tuple lock in that case.
The HTSU change also means that routine MultiXactHasRunningRemoteMembers
introduced in commit 11ac4c73cb is no longer necessary and can be
removed; the case that used to require it is now handled naturally as
result of the changes to heap_delete and heap_update.
The second part of the fix to the performance issue is to adjust
heap_lock_tuple to avoid the slowness:
1. Previously we checked for the case that our own transaction already
held a strong enough lock and returned MayBeUpdated, but only in the
multixact case. Now we do it for the plain Xid case as well, which
saves having to LockTuple.
2. If the current transaction is the only locker of the tuple (but with
a lock not as strong as what we need; otherwise it would have been
caught in the check mentioned above), we can skip sleeping on the
multixact, and instead go straight to create an updated multixact with
the additional lock strength.
3. Most importantly, make sure that both the single-xid-locker case and
the multixact-locker case optimization are applied always. We do this
by checking both in a single place, rather than them appearing in two
separate portions of the routine -- something that is made possible by
the HeapTupleSatisfiesUpdate API change. Previously we would only check
for the single-xid case when HTSU returned MayBeUpdated, and only
checked for the multixact case when HTSU returned BeingUpdated. This
was at odds with what HTSU actually returned in one case: if our own
transaction was locker in a multixact, it returned MayBeUpdated, so the
optimization never applied. This is what led to the large multixacts in
the first place.
Per bug report #8470 by Oskari Saarenmaa.
FORCE option has been marked "obsolete" since very old version 7.4
but existed for backwards compatibility. Per discussion on pgsql-hackers,
we concluded that it's no longer worth keeping supporting the option.
When certain event-trigger-only functions are called when not in the
wrong context, they were reporting the "feature not supported" SQLSTATE,
which is somewhat misleading. Create a new custom error code for such
uses instead.
Not backpatched since it may be seen as an undesirable behavioral
change.
Author: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAB7nPqQ-5NAkHQHh_NOm7FPep37NCiLKwPoJ2Yxb8TDoGgbYYA@mail.gmail.com
It was previously possible to have the launcher re-execute its main loop
before shutting down if some other signal was received or an error
occurred after getting SIGTERM, as reported by Qingqing Zhou.
While investigating, Tom Lane further noticed that if autovacuum had
been disabled in the config file, it would misbehave by trying to start
a new worker instead of bailing out immediately -- it would consider
itself as invoked in emergency mode.
Fix both problems by checking the shutdown flag in a few more places.
These problems have existed since autovacuum was introduced, so
backpatch all the way back.
This is consistent with what the new numeric suppor for abbreviated keys
now does, and seems much more convenient than having a separate compiler
define to control this debug output.
Peter Geoghegan
Commit a2e35b53 should have removed the variable declaration in the
inner block, but didn't. As a result, the returned address might end up
not being what was intended.
It now also reports temporary objects dropped that are local to the
backend. Previously we weren't reporting any temp objects because it
was deemed unnecessary; but as it turns out, it is necessary if we want
to keep close track of DDL command execution inside one session. Temp
objects are reported as living in schema pg_temp, which works because
such a schema-qualification always refers to the temp objects of the
current session.
This was already fixed in 0d906798f, but I failed to update the
array-formatted case. This is not backpatched, since this only affects
the code path introduced by commit a676201490.
Reduce lock levels to ShareRowExclusive for the following SQL
CREATE TRIGGER (but not DROP or ALTER)
ALTER TABLE ENABLE TRIGGER
ALTER TABLE DISABLE TRIGGER
ALTER TABLE … ADD CONSTRAINT FOREIGN KEY
Original work by Simon Riggs, extracted and refreshed by Andreas Karlsson
New test cases added by Andreas Karlsson
Reviewed by Noah Misch, Andres Freund, Michael Paquier and Simon Riggs
Previously we would re-use input subexpressions in all expression trees
attached to a Join plan node. However, if it's an outer join and the
subexpression appears in the nullable-side input, this is potentially
incorrect for apparently-matching subexpressions that came from above
the outer join (ie, targetlist and qpqual expressions), because the
executor will treat the subexpression value as NULL when maybe it should
not be.
The case is fairly hard to hit because (a) you need a non-strict
subexpression (else NULL is correct), and (b) we don't usually compute
expressions in the outputs of non-toplevel plan nodes. But we might do
so if the expressions are sort keys for a mergejoin, for example.
Probably in the long run we should make a more explicit distinction between
Vars appearing above and below an outer join, but that will be a major
planner redesign and not at all back-patchable. For the moment, just hack
set_join_references so that it will not match any non-Var expressions
coming from nullable inputs to expressions that came from above the join.
(This is somewhat overkill, in that a strict expression could still be
matched, but it doesn't seem worth the effort to check that.)
Per report from Qingqing Zhou. The added regression test case is based
on his example.
This has been broken for a very long time, so back-patch to all active
branches.
When committing abd94bcac4, I tried to make
it decide what kind of abbreviation to use based only on SIZEOF_DATUM,
without regard to USE_FLOAT8_BYVAL. That attempt was a few bricks short
of a load, so try to fix it, and add a comment explaining what we're
about.
Patch by me; review (but not a full endorsement) by Andrew Gierth.
Commit ed9cc2b5df made it unnecessary to pass
start_nblkno to _hash_splitbucket(), and for that matter unnecessary to
have the internal nblkno variable either. My compiler didn't complain
about that, but some did. I also rearranged the use of oblkno a bit to
make that case more parallel.
Report and initial patch by Petr Jelinek, rearranged a bit by me.
Back-patch to all branches, like the previous patch.
This lets later stages have access to the transformed expression; in
particular it allows DDL-deparsing code during event triggers to pass
the transformed expression to ruleutils.c, so that the complete command
can be deparsed.
This shuffles the timing of the transform calls a bit: previously,
nothing was transformed during parse analysis, and only the
RELKIND_RELATION case was being handled during execution. After this
patch, all expressions are transformed during parse analysis (including
those for relkinds other than RELATION), and the error for other
relation kinds is thrown only during execution. So we do more work than
before to reject some bogus cases. That seems acceptable.
This is useful to control autovacuum log volume, for situations where
monitoring only a set of tables is necessary.
Author: Michael Paquier
Reviewed by: A team led by Naoya Anzai (also including Akira Kurosawa,
Taiki Kondo, Huong Dangminh), Fujii Masao.
Similarly to previous fix 9b8d478, commit 2c03216 has switched
XLogReaderAllocate() to use a set of palloc calls instead of malloc,
causing any callers of this function to fail with an error instead of
receiving a NULL pointer in case of out-of-memory error. Fix this by
using palloc_extended with MCXT_ALLOC_NO_OOM that will safely return
NULL in case of an OOM.
Michael Paquier, slightly modified by me.
Be more aggressive about aborting early on if it looks like it's not
helping, but be less aggressive about aborting later on, since it's
more expensive at that point, and also since we're currently aborting
in some cases where abbreviation can still deliver a substantial win.
Peter Geoghegan. Extensive testing by Tomas Vondra.
Commit 2c03216 changed allocate_recordbuf() so that it uses a palloc to
allocate the read buffer and fails immediately when an out-of-memory error
shows up, even though its callers still expect that NULL is returned in that
case. This bug is fixed making allocate_recordbuf() use a palloc_extended
with MCXT_ALLOC_NO_OOM flag and return NULL in OOM case.
Michael Paquier
This commit also adds pg_malloc_extended for frontend. These interfaces
can be used to control at a lower level memory allocation using an interface
similar to MemoryContextAllocExtended. For example, the callers can specify
MCXT_ALLOC_NO_OOM if they want to suppress the "out of memory" error while
allocating the memory and handle a NULL return value.
Michael Paquier, reviewed by me.
While a new backend nominally participates in sinval signaling starting
from the SharedInvalBackendInit call near the top of InitPostgres, it
cannot recognize sinval messages for unshared catalogs of its database
until it has set up MyDatabaseId. This is not problematic for the catcache
or relcache, which by definition won't have loaded any data from or about
such catalogs before that point. However, commit 568d4138c6
introduced a mechanism for re-using MVCC snapshots for catalog scans, and
made invalidation of those depend on recognizing relevant sinval messages.
So it's possible to establish a catalog snapshot to read pg_authid and
pg_database, then before we set MyDatabaseId, receive sinval messages that
should result in invalidating that snapshot --- but do not, because we
don't realize they are for our database. This mechanism explains the
intermittent buildfarm failures we've seen since commit 31eae6028e.
That commit was not itself at fault, but it introduced a new regression
test that does reconnections concurrently with the "vacuum full pg_am"
command in vacuum.sql. This allowed the pre-existing error to be exposed,
given just the right timing, because we'd fail to update our information
about how to access pg_am. In principle any VACUUM FULL on a system
catalog could have created a similar hazard for concurrent incoming
connections. Perhaps there are more subtle failure cases as well.
To fix, force invalidation of the catalog snapshot as soon as we've
set MyDatabaseId.
Back-patch to 9.4 where the error was introduced.
In 83ff1618 we defined integer limits iff they're not provided by the
system. That turns out not to be the greatest idea because there's
different ways some datatypes can be represented. E.g. on OSX PG's 64bit
datatype will be a 'long int', but OSX unconditionally uses 'long
long'. That disparity then can lead to warnings, e.g. around printf
formats.
One way to fix that would be to back int64 using stdint.h's
int64_t. While a good idea it's not that easy to implement. We would
e.g. need to include stdint.h in our external headers, which we don't
today. Also computing the correct int64 printf formats in that case is
nontrivial.
Instead simply prefix the integer limits with PG_ and define them
unconditionally. I've adjusted all the references to them in code, but
not the ones in comments; the latter seems unnecessary to me.
Discussion: 20150331141423.GK4878@alap3.anarazel.de
This patch fills in the formerly-stub networksel() and networkjoinsel()
estimation functions. Those are used for << <<= >> >>= and && operators
on inet/cidr types. The estimation is not perfect, certainly, because
we rely on the existing statistics collected for the inet btree operators.
But it's a long way better than nothing, and it's not clear that asking
ANALYZE to collect separate stats for these operators would be a win.
Emre Hasegeli, with reviews from Dilip Kumar and Heikki Linnakangas,
and some further hacking by me
_hash_splitbucket() obtained the base page of the new bucket by calling
_hash_getnewbuf(), but it held no exclusive lock that would prevent some
other process from calling _hash_getnewbuf() at the same time. This is
contrary to _hash_getnewbuf()'s API spec and could in fact cause failures.
In practice, we must only call that function while holding write lock on
the hash index's metapage.
An additional problem was that we'd already modified the metapage's bucket
mapping data, meaning that failure to extend the index would leave us with
a corrupt index.
Fix both issues by moving the _hash_getnewbuf() call to just before we
modify the metapage in _hash_expandtable().
Unfortunately there's still a large problem here, which is that we could
also incur ENOSPC while trying to get an overflow page for the new bucket.
That would leave the index corrupt in a more subtle way, namely that some
index tuples that should be in the new bucket might still be in the old
one. Fixing that seems substantially more difficult; even preallocating as
many pages as we could possibly need wouldn't entirely guarantee that the
bucket split would complete successfully. So for today let's just deal
with the base case.
Per report from Antonin Houska. Back-patch to all active branches.
... and rename it and its sibling array_offsets to array_position and
array_positions, to account for the changed behavior.
Having the functions return subscripts better matches existing practice,
and is better suited to using the result value as a subscript into the
array directly. For one-based arrays, the new definition is identical
to what was originally committed.
(We use the term "subscript" in the documentation, which is what we use
whenever we talk about arrays; but the functions themselves are named
using the word "position" to match the standard-defined POSITION()
functions.)
Author: Pavel Stěhule
Behavioral problem noted by Dean Rasheed.
ReindexIndex() trusts a parser-built RangeVar with the persistence to
use for the new copy of the index; but the parser naturally does not
know what's the persistence of the original index. To find out the
correct persistence, grab it from relcache.
This bug was introduced by commit 85b506bbfc, and therefore no
backpatch is necessary.
Bug reported by Thom Brown, analysis and patch by Michael Paquier; test
case provided by Fabrízio de Royes Mello.
The previous coding in get_const_expr() tried to avoid quoting integer,
float, and numeric literals if at all possible. While that looks nice,
it means that dumped expressions might re-parse to something that's
semantically equivalent but not the exact same parsetree; for example
a FLOAT8 constant would re-parse as a NUMERIC constant with a cast to
FLOAT8. Though the result would be the same after constant-folding,
this is problematic in certain contexts. In particular, Jeff Davis
pointed out that this could cause unexpected failures in ALTER INHERIT
operations because of child tables having not-exactly-equivalent CHECK
expressions. Therefore, favor correctness over legibility and dump
such constants in quotes except in the limited cases where they'll
be interpreted as the same type even without any casting.
This results in assorted small changes in the regression test outputs,
and will affect display of user-defined views and rules similarly.
The odds of that causing problems in the field seem non-negligible;
given the lack of previous complaints, it seems best not to change
this in the back branches.
BackendIdGetTransactionIds() neglected the possibility that the PROC
pointer in a ProcState array entry is null. In current usage, this could
only crash if the other backend had exited since pgstat_read_current_status
saw it as active, which is a pretty narrow window. But it's reachable in
the field, per bug #12918 from Vladimir Borodin.
Back-patch to 9.4 where the faulty code was introduced.
Slow functions in index expressions might cause this loop to take long
enough to make it worth being cancellable. Probably it would be enough
to call CHECK_FOR_INTERRUPTS here, but for consistency with other
per-sample-row loops in this file, let's use vacuum_delay_point.
Report and patch by Jeff Janes. Back-patch to all supported branches.
Previously the funcCtx was a child of the tmpCtx, but that was broken
by commit eaa5808e8e, which made
MemoryContextReset() delete, not reset, child contexts. The behavior of
having a tmpCtx reset also clear the other context seems rather dubious
anyway, so let's just disentangle them. Per report from Erik Rijkers.
In passing, fix badly-inaccurate comments about these contexts.
We cannot use the index's tuple descriptor directly to describe the index
tuples returned in an index-only scan. That's because the index might use
a different datatype for the values stored on disk than the type originally
indexed. As long as they were both pass-by-ref, it worked, but will not work
for pass-by-value types of different sizes. I noticed this as a crash when I
started hacking a patch to add fetch methods to btree_gist.
This improves on commit bbfd7edae5 by
making two simple changes:
* pg_attribute_noreturn now takes parentheses, ie pg_attribute_noreturn().
Likewise pg_attribute_unused(), pg_attribute_packed(). This reduces
pgindent's tendency to misformat declarations involving them.
* attributes are now always attached to function declarations, not
definitions. Previously some places were taking creative shortcuts,
which were not merely candidates for bad misformatting by pgindent
but often were outright wrong anyway. (It does little good to put a
noreturn annotation where callers can't see it.) In any case, if
we would like to believe that these macros can be used with non-gcc
compilers, we should avoid gratuitous variance in usage patterns.
I also went through and manually improved the formatting of a lot of
declarations, and got rid of excessively repetitive (and now obsolete
anyway) comments informing the reader what pg_attribute_printf is for.
This adds a new GiST opclass method, 'fetch', which is used to reconstruct
the original Datum from the value stored in the index. Also, the 'canreturn'
index AM interface function gains a new 'attno' argument. That makes it
possible to use index-only scans on a multi-column index where some of the
opclasses support index-only scans but some do not.
This patch adds support in the box and point opclasses. Other opclasses
can added later as follow-on patches (btree_gist would be particularly
interesting).
Anastasia Lubennikova, with additional fixes and modifications by me.
Several submitted and even committed patches have run into the problem
that C89, our baseline, does not provide minimum/maximum values for
various integer datatypes. C99's stdint.h does, but we can't rely on
it.
Several parts of the code defined limits locally, so instead centralize
the definitions to c.h.
This patch also changes the more obvious usages of literal limit values;
there's more places that could be changed, but it's less clear whether
it's beneficial to change those.
Author: Andrew Gierth
Discussion: 87619tc5wc.fsf@news-spur.riddles.org.uk
Since commit a2e35b53c3, most CREATE and ALTER commands return the
ObjectAddress of the affected object. This is useful for event triggers
to try to figure out exactly what happened. This patch extends this
idea a bit further to cover ALTER TABLE as well: an auxiliary
ObjectAddress is returned for each of several subcommands of ALTER
TABLE. This makes it possible to decode with precision what happened
during execution of any ALTER TABLE command; for instance, which
constraint was added by ALTER TABLE ADD CONSTRAINT, or which parent got
dropped from the parents list by ALTER TABLE NO INHERIT.
As with the previous patch, there is no immediate user-visible change
here.
This is all really just continuing what c504513f83 started.
Reviewed by Stephen Frost.
Even though the main benefit of the Lehman and Yao algorithm for
btrees is that no locks need be held between page reads in an
index search, we were holding a buffer pin on each leaf page after
it was read until we were ready to read the next one. The reason
was so that we could treat this as a weak lock to create an
"interlock" with vacuum's deletion of heap line pointers, even
though our README file pointed out that this was not necessary for
a scan using an MVCC snapshot.
The main goal of this patch is to reduce the blocking of vacuum
processes by in-progress btree index scans (including a cursor
which is idle), but the code rearrangement also allows for one
less buffer content lock to be taken when a forward scan steps from
one page to the next, which results in a small but consistent
performance improvement in many workloads.
This patch leaves behavior unchanged for some cases, which can be
addressed separately so that each case can be evaluated on its own
merits. These unchanged cases are when a scan uses a non-MVCC
snapshot, an index-only scan, and a scan of a btree index for which
modifications are not WAL-logged. If later patches allow all of
these cases to drop the buffer pin after reading a leaf page, then
the btree vacuum process can be simplified; it will no longer need
the "super-exclusive" lock to delete tuples from a page.
Reviewed by Heikki Linnakangas and Kyotaro Horiguchi
I failed to realize that server names reported in the object args array
would get quoted, which is wrong; remove that, making sure that it's
only quoted in the string-formatted identity.
This bug was introduced by my commit cf34e373, which was backpatched,
but since object name/args arrays are new in commit a676201490, there
is no need to backpatch this any further.
ExecOpenScanRelation assumed that any relation listed in the ExecRowMark
list has been locked by InitPlan; but this is not true if the rel's
markType is ROW_MARK_COPY, which is possible if it's a foreign table.
In most (possibly all) cases, failure to acquire a lock here isn't really
problematic because the parser, planner, or plancache would have taken the
appropriate lock already. In principle though it might leave us vulnerable
to working with a relation that we hold no lock on, and in any case if the
executor isn't depending on previously-taken locks otherwise then it should
not do so for ROW_MARK_COPY relations.
Noted by Etsuro Fujita. Back-patch to all active versions, since the
inconsistency has been there a long time. (It's almost certainly
irrelevant in 9.0, since that predates foreign tables, but the code's
still wrong on its own terms.)
Previously, CHECK constraints of the same scope were checked in whatever
order they happened to be read from pg_constraint. (Usually, but not
reliably, this would be creation order for domain constraints and reverse
creation order for table constraints, because of differing implementation
details.) Nondeterministic results of this sort are problematic at least
for testing purposes, and in discussion it was agreed to be a violation of
the principle of least astonishment. Therefore, borrow the principle
already established for triggers, and apply such checks in name order
(using strcmp() sort rules). This lets users control the check order
if they have a mind to.
Domain CHECK constraints still follow the rule of checking lower nested
domains' constraints first; the name sort only applies to multiple
constraints attached to the same domain.
In passing, I failed to resist the temptation to wordsmith a bit in
create_domain.sgml.
Apply to HEAD only, since this could result in a behavioral change in
existing applications, and the potential regression test failures have
not actually been observed in our buildfarm.
Recovery delays are implemented by waiting on a latch, and latches take
milliseconds as a parameter. The required amount of waiting was computed
using microsecond resolution though and the wait loop's abort condition
was checking the delay in microseconds as well. This could lead to
short spurts of busy looping when the overall wait time was below a
millisecond, but above 0 microseconds.
Instead just formulate the wait loop's abort condition in millisecond
granularity as well. Given that that's recovery_min_apply_delay
resolution, it seems harmless to not wait for less than a millisecond.
Backpatch to 9.4 where recovery_min_apply_delay was introduced.
Discussion: 20150323141819.GH26995@alap3.anarazel.de
dsm_control->nitems never decreases, so this is testing whether the
server has *ever* run out of DSM segments, not whether it is
*currently* out of DSM segments.
Reported off-list by Amit Kapila.
Revert "to_char(float4/8): zero pad to specified length". There are
too many platform-specific problems, and the proper rounding is missing.
Also revert companion patch 9d61b9953c.
Foreign tables can now be inheritance children, or parents. Much of the
system was already ready for this, but we had to fix a few things of
course, mostly in the area of planner and executor handling of row locks.
As side effects of this, allow foreign tables to have NOT VALID CHECK
constraints (and hence to accept ALTER ... VALIDATE CONSTRAINT), and to
accept ALTER SET STORAGE and ALTER SET WITH/WITHOUT OIDS. Continuing to
disallow these things would've required bizarre and inconsistent special
cases in inheritance behavior. Since foreign tables don't enforce CHECK
constraints anyway, a NOT VALID one is a complete no-op, but that doesn't
mean we shouldn't allow it. And it's possible that some FDWs might have
use for SET STORAGE or SET WITH OIDS, though doubtless they will be no-ops
for most.
An additional change in support of this is that when a ModifyTable node
has multiple target tables, they will all now be explicitly identified
in EXPLAIN output, for example:
Update on pt1 (cost=0.00..321.05 rows=3541 width=46)
Update on pt1
Foreign Update on ft1
Foreign Update on ft2
Update on child3
-> Seq Scan on pt1 (cost=0.00..0.00 rows=1 width=46)
-> Foreign Scan on ft1 (cost=100.00..148.03 rows=1170 width=46)
-> Foreign Scan on ft2 (cost=100.00..148.03 rows=1170 width=46)
-> Seq Scan on child3 (cost=0.00..25.00 rows=1200 width=46)
This was done mainly to provide an unambiguous place to attach "Remote SQL"
fields, but it is useful for inherited updates even when no foreign tables
are involved.
Shigeru Hanada and Etsuro Fujita, reviewed by Ashutosh Bapat and Kyotaro
Horiguchi, some additional hacking by me
Previously, zero padding was limited to the internal length, rather than
the specified length. This allows it to match to_char(int/numeric), which
always padded to the specified length.
Regression tests added.
BACKWARD INCOMPATIBILITY
On platforms where we support 128bit integers, use them to implement
faster transition functions for sum(int8), avg(int8),
var_*(int2/int4),stdev_*(int2/int4). Where not supported continue to use
numeric as a transition type.
In some synthetic benchmarks this has been shown to provide significant
speedups.
Bumps catversion.
Discussion: 544BB5F1.50709@proxel.se
Author: Andreas Karlsson
Reviewed-By: Peter Geoghegan, Petr Jelinek, Andres Freund,
Oskari Saarenmaa, David Rowley
The pg_stat and pg_signal-related functions have been using GetUserId()
instead of has_privs_of_role() for checking if the current user should
be able to see details in pg_stat_activity or signal other processes,
requiring a user to do 'SET ROLE' for inheirited roles for a permissions
check, unlike other permissions checks.
This patch changes that behavior to, instead, act like most other
permission checks and use has_privs_of_role(), removing the 'SET ROLE'
need. Documentation and error messages updated accordingly.
Per discussion with Alvaro, Peter, Adam (though not using Adam's patch),
and Robert.
Reviewed by Jeevan Chalke.
Right now, there's only one flag, DSM_CREATE_NULL_IF_MAXSEGMENTS,
which suppresses the error that would normally be thrown when the
maximum number of segments already exists, instead returning NULL.
It might be useful to add more flags in the future, such as one to
ignore allocation errors, but I haven't done that here.
Previously, GetBackgroundWorkerPid() would return BGWH_NOT_YET_STARTED
if the slot used for the worker registration had not been reused by
unrelated activity, and BGWH_STOPPED if it had. Either way, a process
that had requested notification when the state of one of its
background workers changed did not receive such notifications. Fix
things so that GetBackgroundWorkerPid() always returns BGWH_STOPPED in
this situation, so that we do not erroneously give waiters the
impression that the worker will eventually be started; and send
notifications just as we would if the process terminated after having
been started, so that it's possible to wait for the postmaster to
process a worker termination request without polling.
Discovered by Amit Kapila during testing of parallel sequential scan.
Analysis and fix by me. Back-patch to 9.4; there may not be anyone
relying on this interface yet, but if anyone is, the new behavior is a
clear improvement.
We were involving the parser too much in setting up initial vacuuming
parameters. This patch moves that responsibility elsewhere to simplify
code, and also to make future additions easier. To do this, create a
new struct VacuumParams which is filled just prior to vacuum execution,
instead of at parse time; for user-invoked vacuuming this is set up in a
new function ExecVacuum, while autovacuum sets it up by itself.
While at it, add a new member VACOPT_SKIPTOAST to enum VacuumOption,
only set by autovacuum, which is used to disable vacuuming of the toast
table instead of the old do_toast parameter; this relieves the argument
list of vacuum() and some callees a bit. This partially makes up for
having added more arguments in an effort to avoid having autovacuum from
constructing a VacuumStmt parse node.
Author: Michael Paquier. Some tweaks by Álvaro
Reviewed by: Robert Haas, Stephen Frost, Álvaro Herrera
Since the array length check is using a post-increment operator, the
compiler complains that there's a potential write to one element beyond
the end of the array. This is not possible currently: the only path to
this function is through pg_get_object_address(), which already verifies
that the input array is no more than two elements in length. Still, a
bug is a bug.
No idea why my compiler doesn't complain about this ...
Pointed out by Dead Rasheed and Peter Eisentraut
In the spirit of 890192e99a and 4464303405f: have get_object_address
understand individual pg_amop and pg_amproc objects. There is no way to
refer to such objects directly in the grammar -- rather, they are almost
always considered an integral part of the opfamily that contains them.
(The only case that deals with them individually is ALTER OPERATOR
FAMILY ADD/DROP, which carries the opfamily address separately and thus
does not need it to be part of each added/dropped element's address.)
In event triggers it becomes possible to become involved with individual
amop/amproc elements, and this commit enables pg_get_object_address to
do so as well.
To make the overall coding simpler, this commit also slightly changes
the get_object_address representation for opclasses and opfamilies:
instead of having the AM name in the objargs array, I moved it as the
first element of the objnames array. This enables the new code to use
objargs for the type names used by pg_amop and pg_amproc.
Reviewed by: Stephen Frost
This patch fixes two inadequacies of the PlanRowMark representation.
First, that the original LockingClauseStrength isn't stored (and cannot be
inferred for foreign tables, which always get ROW_MARK_COPY). Since some
PlanRowMarks are created out of whole cloth and don't actually have an
ancestral RowMarkClause, this requires adding a dummy LCS_NONE value to
enum LockingClauseStrength, which is fairly annoying but the alternatives
seem worse. This fix allows getting rid of the use of get_parse_rowmark()
in FDWs (as per the discussion around commits 462bd95705 and
8ec8760fc8), and it simplifies some things elsewhere.
Second, that the representation assumed that all child tables in an
inheritance hierarchy would use the same RowMarkType. That's true today
but will soon not be true. We add an "allMarkTypes" field that identifies
the union of mark types used in all a parent table's children, and use
that where appropriate (currently, only in preprocess_targetlist()).
In passing fix a couple of minor infelicities left over from the SKIP
LOCKED patch, notably that _outPlanRowMark still thought waitPolicy
is a bool.
Catversion bump is required because the numeric values of enum
LockingClauseStrength can appear in on-disk rules.
Extracted from a much larger patch to support foreign table inheritance;
it seemed worth breaking this out, since it's a separable concern.
Shigeru Hanada and Etsuro Fujita, somewhat modified by me
Since 465883b0a two versions of commit records have existed. A compact
version that was used when no cache invalidations, smgr unlinks and
similar were needed, and a full version that could deal with all
that. Additionally the full version was embedded into twophase commit
records.
That resulted in a measurable reduction in the size of the logged WAL in
some workloads. But more recently additions like logical decoding, which
e.g. needs information about the database something was executed on,
made it applicable in fewer situations. The static split generally made
it hard to expand the commit record, because concerns over the size made
it hard to add anything to the compact version.
Additionally it's not particularly pretty to have twophase.c insert
RM_XACT records.
Rejigger things so that the commit and abort records only have one form
each, including the twophase equivalents. The presence of the various
optional (in the sense of not being in every record) pieces is indicated
by a bits in the 'xinfo' flag. That flag previously was not included in
compact commit records. To prevent an increase in size due to its
presence, it's only included if necessary; signalled by a bit in the
xl_info bits available for xact.c, similar to heapam.c's
XLOG_HEAP_OPMASK/XLOG_HEAP_INIT_PAGE.
Twophase commit/aborts are now the same as their normal
counterparts. The original transaction's xid is included in an optional
data field.
This means that commit records generally are smaller, except in the case
of a transaction with subtransactions, but no other special cases; the
increase there is four bytes, which seems acceptable given that the more
common case of not having subtransactions shrank. The savings are
especially measurable for twophase commits, which previously always used
the full version; but will in practice only infrequently have required
that.
The motivation for this work are not the space savings and and
deduplication though; it's that it makes it easier to extend commit
records with additional information. That's just a few lines of code
now; without impacting the common case where that information is not
needed.
Discussion: 20150220152150.GD4149@awork2.anarazel.de,
235610.92468.qm%40web29004.mail.ird.yahoo.com
Reviewed-By: Heikki Linnakangas, Simon Riggs
The introduction of min_wal_size & max_wal_size in 88e9823026 makes it
feasible to increase the default upper bound in checkpoint
size. Previously raising the default would lead to a increased disk
footprint, even if more segments weren't beneficial. The low default of
checkpoint size is one of common performance problem users have thus
increasing the default makes sense. Setups where the increase in
maximum disk usage is a problem will very likely have to run with a
modified configuration anyway.
Discussion: 54F4EFB8.40202@agliodbs.com,
CA+TgmoZEAgX5oMGJOHVj8L7XOkAe05Gnf45rP40m-K3FhZRVKg@mail.gmail.com
Author: Josh Berkus, after a discussion involving lots of people.
The new recovery_target_action (introduced in aedccb1f6/b8e33a85d4)
replaces it's functionality. Having both seems likely to cause more
confusion than it saves worry due to the incompatibility.
Discussion: 5484FC53.2060903@2ndquadrant.com
Author: Petr Jelinek
The message tries to tell the replication apply delay which fails if
the first WAL record is not applied yet. Fix is, instead of telling
overflowed minus numeric, showing "N/A" which indicates that the delay
data is not yet available. Problem reported by me and patch by
Fabrízio de Royes Mello.
Back patched to 9.4, 9.3 and 9.2 stable branches (9.1 and 9.0 do not
have the debug message).
The ROW_MARK_COPY path in EvalPlanQualFetchRowMarks() was just setting
tableoid to InvalidOid, I think on the assumption that the referenced
RTE must be a subquery or other case without a meaningful OID. However,
foreign tables also use this code path, and they do have meaningful
table OIDs; so failure to set the tuple field can lead to user-visible
misbehavior. Fix that by fetching the appropriate OID from the range
table.
There's still an issue about whether CTID can ever have a meaningful
value in this case; at least with postgres_fdw foreign tables, it does.
But that is a different problem that seems to require a significantly
different patch --- it's debatable whether postgres_fdw really wants to
use this code path at all.
Simplified version of a patch by Etsuro Fujita, who also noted the
problem to begin with. The issue can be demonstrated in all versions
having FDWs, so back-patch to 9.1.
We can't handle this in the general case due to limitations of the
planner's data representations; but we can allow it in many useful cases,
by being careful to flatten only when we are pulling a single-row subquery
up into a FROM (or, equivalently, inner JOIN) node that will still have at
least one remaining relation child. Per discussion of an example from
Kyotaro Horiguchi.
While poking at David Kubečka's issue I noticed an ancient logic error
in get_loop_count(): it used 1.0 as a "no data yet" indicator, but since
that is actually a valid rowcount estimate, this doesn't work. If we
have one input relation with 1.0 as rowcount and then another one with
a larger rowcount, we should use 1.0 as the result, but we picked the
larger rowcount instead. (I think when I coded this, I recognized the
conflict, but mistakenly thought that the logic would pick the desired
count anyway.)
Fixing this changed the plan for one existing regression test case.
Since the point of that test is to exercise creation of a particular
shape of nestloop plan, I tweaked the query a little bit so it still
results in the same plan choice.
This is definitely a bug, but I'm hesitant to back-patch since it might
change plan choices unexpectedly, and anyway failure to implement a
heuristic precisely as intended is a pretty low-grade bug.
If we have a semijoin, say
SELECT * FROM x WHERE x1 IN (SELECT y1 FROM y)
and we're estimating the cost of a parameterized indexscan on x, the number
of repetitions of the indexscan should not be taken as the size of y; it'll
really only be the number of distinct values of y1, because the only valid
plan with y on the outside of a nestloop would require y to be unique-ified
before joining it to x. Most of the time this doesn't make that much
difference, but sometimes it can lead to drastically underestimating the
cost of the indexscan and hence choosing a bad plan, as pointed out by
David Kubečka.
Fixing this is a bit difficult because parameterized indexscans are costed
out quite early in the planning process, before we have the information
that would be needed to call estimate_num_groups() and thereby estimate the
number of distinct values of the join column(s). However we can move the
code that extracts a semijoin RHS's unique-ification columns, so that it's
done in initsplan.c rather than on-the-fly in create_unique_path(). That
shouldn't make any difference speed-wise and it's really a bit cleaner too.
The other bit of information we need is the size of the semijoin RHS,
which is easy if it's a single relation (we make those estimates before
considering indexscan costs) but problematic if it's a join relation.
The solution adopted here is just to use the product of the sizes of the
join component rels. That will generally be an overestimate, but since
estimate_num_groups() only uses this input as a clamp, an overestimate
shouldn't hurt us too badly. In any case we don't allow this new logic
to produce a value larger than we would have chosen before, so that at
worst an overestimate leaves us no wiser than we were before.
In the spirit of 890192e99a, this time add support for the things
living in the pg_default_acl catalog. These are not really "objects",
but they show up as such in event triggers.
There is no "DROP DEFAULT PRIVILEGES" or similar command, so it doesn't
look like the new representation given would be useful anywhere else, so
I didn't try to use it outside objectaddress.c. (That might be a bug in
itself, but that would be material for another commit.)
Reviewed by Stephen Frost.
Since commit 72dd233d3e we were trying to obtain object addressing
information in sql_drop event triggers, but that caused failures when
the drops involved user mappings. This addition enables that to work
again. Naturally, pg_get_object_address can work with these objects
now, too.
I toyed with the idea of removing DropUserMappingStmt as a node and
using DropStmt instead in the DropUserMappingStmt grammar production,
but that didn't go very well: for one thing the messages thrown by the
specific code are specialized (you get "server not found" if you specify
the wrong server, instead of a generic "user mapping for ... not found"
which you'd get it we were to merge this with RemoveObjects --- unless
we added even more special cases). For another thing, it would require
to pass RoleSpec nodes through the objname/objargs representation used
by RemoveObjects, which works in isolation, but gets messy when
pg_get_object_address is involved. So I dropped this part for now.
Reviewed by Stephen Frost.
While the SQL standard is pretty vague on the overall topic of operator
precedence (because it never presents a unified BNF for all expressions),
it does seem reasonable to conclude from the spec for <boolean value
expression> that OR has the lowest precedence, then AND, then NOT, then IS
tests, then the six standard comparison operators, then everything else
(since any non-boolean operator in a WHERE clause would need to be an
argument of one of these).
We were only sort of on board with that: most notably, while "<" ">" and
"=" had properly low precedence, "<=" ">=" and "<>" were treated as generic
operators and so had significantly higher precedence. And "IS" tests were
even higher precedence than those, which is very clearly wrong per spec.
Another problem was that "foo NOT SOMETHING bar" constructs, such as
"x NOT LIKE y", were treated inconsistently because of a bison
implementation artifact: they had the documented precedence with respect
to operators to their right, but behaved like NOT (i.e., very low priority)
with respect to operators to their left.
Fixing the precedence issues is just a small matter of rearranging the
precedence declarations in gram.y, except for the NOT problem, which
requires adding an additional lookahead case in base_yylex() so that we
can attach a different token precedence to NOT LIKE and allied two-word
operators.
The bulk of this patch is not the bug fix per se, but adding logic to
parse_expr.c to allow giving warnings if an expression has changed meaning
because of these precedence changes. These warnings are off by default
and are enabled by the new GUC operator_precedence_warning. It's believed
that very few applications will be affected by these changes, but it was
agreed that a warning mechanism is essential to help debug any that are.
Error messages informing the user that no such column exists can
sometimes provoke a perplexed response. This often happens due to
a subtle typo in the column name or, perhaps less likely, in the
alias name. To speed discovery of what the real issue is in such
cases, we'll now search the range table for approximate matches.
If there are one or two such matches that are good enough to think
that they might be what the user intended to type, and better than
all other approximate matches, we'll issue a hint suggesting that
the user might have intended to reference those columns.
Peter Geoghegan and Robert Haas
Until now __attribute__() was defined to be empty for all compilers but
gcc. That's problematic because it prevents using it in other compilers;
which is necessary e.g. for atomics portability. It's also just
generally dubious to do so in a header as widely included as c.h.
Instead add pg_attribute_format_arg, pg_attribute_printf,
pg_attribute_noreturn macros which are implemented in the compilers that
understand them. Also add pg_attribute_noreturn and pg_attribute_packed,
but don't provide fallbacks, since they can affect functionality.
This means that external code that, possibly unwittingly, relied on
__attribute__ defined to be empty on !gcc compilers may now run into
warnings or errors on those compilers. But there shouldn't be many
occurances of that and it's hard to work around...
Discussion: 54B58BA3.8040302@ohmu.fi
Author: Oskari Saarenmaa, with some minor changes by me.
When newly-added GUC parameter, wal_compression, is on, the PostgreSQL server
compresses a full page image written to WAL when full_page_writes is on or
during a base backup. A compressed page image will be decompressed during WAL
replay. Turning this parameter on can reduce the WAL volume without increasing
the risk of unrecoverable data corruption, but at the cost of some extra CPU
spent on the compression during WAL logging and on the decompression during
WAL replay.
This commit changes the WAL format (so bumping WAL version number) so that
the one-byte flag indicating whether a full page image is compressed or not is
included in its header information. This means that the commit increases the
WAL volume one-byte per a full page image even if WAL compression is not used
at all. We can save that one-byte by borrowing one-bit from the existing field
like hole_offset in the header and using it as the flag, for example. But which
would reduce the code readability and the extensibility of the feature.
Per discussion, it's not worth paying those prices to save only one-byte, so we
decided to add the one-byte flag to the header.
This commit doesn't introduce any new compression algorithm like lz4.
Currently a full page image is compressed using the existing PGLZ algorithm.
Per discussion, we decided to use it at least in the first version of the
feature because there were no performance reports showing that its compression
ratio is unacceptably lower than that of other algorithm. Of course,
in the future, it's worth considering the support of other compression
algorithm for the better compression.
Rahila Syed and Michael Paquier, reviewed in various versions by myself,
Andres Freund, Robert Haas, Abhijit Menon-Sen and many others.
... which is the usual convention among AMs, so that pg_filedump and
similar utilities can tell apart pages of different AMs. It was also
the intent of the original code, but I failed to realize that alignment
considerations would move the whole thing to the previous-to-last word
in the page.
The new definition of the associated macro makes surrounding code a bit
leaner, too.
Per note from Heikki at
http://www.postgresql.org/message-id/546A16EF.9070005@vmware.com
SQL has standardized on => as the use of to specify named parameters,
and we've wanted for many years to support the same syntax ourselves,
but this has been complicated by the possible use of => as an operator
name. In PostgreSQL 9.0, we began emitting a warning when an operator
named => was defined, and in PostgreSQL 9.2, we stopped shipping a
=>(text, text) operator as part of hstore. By the time the next major
version of PostgreSQL is released, => will have been deprecated for a
full five years, so hopefully there won't be too many people still
relying on it. We continue to support := for compatibility with
previous PostgreSQL releases.
Pavel Stehule, reviewed by Petr Jelinek, with a few documentation
tweaks by me.
We allow this module to be turned off on restarts, so a restart time
check is enough to activate or deactivate the module; however, if there
is a standby replaying WAL emitted from a master which is restarted, but
the standby isn't, the state in the standby becomes inconsistent and can
easily be crashed.
Fix by activating and deactivating the module during WAL replay on
parameter change as well as on system start.
Problem reported by Fujii Masao in
http://www.postgresql.org/message-id/CAHGQGwFhJ3CnHo1CELEfay18yg_RA-XZT-7D8NuWUoYSZ90r4Q@mail.gmail.com
Author: Petr Jelínek
ALTER DEFAULT PRIVILEGES was trying to decode the list of roles in the
FOR clause as a list of names rather than of RoleSpecs; and the IN
clause in CREATE ROLE was doing the same thing. This was evidenced by
crashes on some buildfarm machines, though on my platform this doesn't
cause a failure by mere chance; I can reproduce the failures only by
adding some padding in struct RoleSpecs.
Fix by dereferencing those lists as being of RoleSpecs, not string
Values.
Commands such as ALTER USER, ALTER GROUP, ALTER ROLE, GRANT, and the
various ALTER OBJECT / OWNER TO, as well as ad-hoc clauses related to
roles such as the AUTHORIZATION clause of CREATE SCHEMA, the FOR clause
of CREATE USER MAPPING, and the FOR ROLE clause of ALTER DEFAULT
PRIVILEGES can now take the keywords CURRENT_USER and SESSION_USER as
user specifiers in place of an explicit user name.
This commit also fixes some quite ugly handling of special standards-
mandated syntax in CREATE USER MAPPING, which in particular would fail
to work in presence of a role named "current_user".
The special role specifiers PUBLIC and NONE also have more consistent
handling now.
Also take the opportunity to add location tracking to user specifiers.
Authors: Kyotaro Horiguchi. Heavily reworked by Álvaro Herrera.
Reviewed by: Rushabh Lathia, Adam Brightwell, Marti Raudsepp.
Commit 5cefbf5a6c introduced an
assumption that this field would always be non-NULL when doing a merge
pass, but that's not true. Without this fix, you can crash the server
by building a hash index that is sufficiently large relative to
maintenance_work_mem, or by triggering a large datum sort.
Commit 5ea86e6e65 changed the comments
for that field to say that it would be set in all cases except for the
hash index case, but that wasn't (and still isn't) true.
The datum-sort failure was spotted by Tomas Vondra; initial analysis
of that failure was by Peter Geoghegan. The remaining issues were
spotted by me during review of the surrounding code, and the patch is
all my fault.
This makes it easier to write frontend programs that needs to understand
the WAL record format of CREATE/DROP DATABASE. dbcommands.h cannot easily
be #included in a frontend program, because it pulls in other header files
that need backend stuff, but the new dbcommands_xlog.h header file has
fewer dependencies.
This role attribute is an ancient PostgreSQL feature, but could only be
set by directly updating the system catalogs, and it doesn't have any
clearly defined use.
Author: Adam Brightwell <adam.brightwell@crunchydatasolutions.com>
We were using "user mapping for user XYZ" as description for user mappings, but
that's ambiguous because users can have mappings on multiple foreign
servers; therefore change it to "for user XYZ on server UVW" instead.
Object identities for user mappings are also updated in the same way, in
branches 9.3 and above.
The incomplete description string was introduced together with the whole
SQL/MED infrastructure by commit cae565e503 of 8.4 era, so backpatch all
the way back.
An OID return value was being used only for a (rather pointless) assert.
Silence by removing the variable and the assert.
Per note from Peter Geoghegan
genericcostestimate() and friends used the cost of the entire indexqual
expressions as the charge for initial evaluation of indexscan arguments.
But of course the index column is not evaluated, only the other side
of the qual expression, so this was a bad overestimate if the index
column was an expensive expression.
To fix, refactor the logic in this area so that there's a single routine
charged with deconstructing index quals and figuring out what is the index
column and what is the comparison expression. This is more or less free in
the case of btree indexes, since btcostestimate() was doing equivalent
deconstruction already. It probably adds a bit of new overhead in the cases
of other index types, but not a lot. (In the case of GIN I think I saved
something by getting rid of code that wasn't aware that the index column
associations were already available "for free".)
Per recent gripe from Jeff Janes.
Arguably this is a bug fix, but I'm hesitant to back-patch because of the
possibility of destabilizing plan choices that people may be happy with.
This code relied on pointer equality to identify which restriction clauses
also appear in the indexquals (and, therefore, don't need to be applied as
simple filter conditions). That was okay once upon a time, years ago,
before we introduced the equivalence-class machinery. Now there's about a
50-50 chance that an equality clause appearing in the indexquals will be
the mirror image (commutator) of its mate in the restriction list. When
that happens, we'd erroneously think that the clause would be re-evaluated
at each visited row, and therefore inflate the cost estimate for the
indexscan by the clause's cost.
Add some logic to catch this case. It seems to me that it continues not to
be worthwhile to expend the extra predicate-proof work that createplan.c
will do on the finally-selected plan, but this case is common enough and
cheap enough to handle that we should do so.
This will make a small difference (about one cpu_operator_cost per row)
in simple cases; but in situations where there's an expensive function in
the indexquals, it can make a very large difference, as seen in recent
example from Jeff Janes.
This is a long-standing bug, but I'm hesitant to back-patch because of the
possibility of destabilizing plan choices that people may be happy with.
Passing a NULL pstate wouldn't actually work, because isLockedRefname()
isn't prepared to cope with it; and there hasn't been any in-core code
that tries in over a decade. So just remove the residual NULL handling.
Spotted by Coverity; analysis and patch by Michael Paquier.
The changed routines are mostly those that can be directly called by
ProcessUtilitySlow; the intention is to make the affected object
information more precise, in support for future event trigger changes.
Originally it was envisioned that the OID of the affected object would
be enough, and in most cases that is correct, but upon actually
implementing the event trigger changes it turned out that ObjectAddress
is more widely useful.
Additionally, some command execution routines grew an output argument
that's an object address which provides further info about the executed
command. To wit:
* for ALTER DOMAIN / ADD CONSTRAINT, it corresponds to the address of
the new constraint
* for ALTER OBJECT / SET SCHEMA, it corresponds to the address of the
schema that originally contained the object.
* for ALTER EXTENSION {ADD, DROP} OBJECT, it corresponds to the address
of the object added to or dropped from the extension.
There's no user-visible change in this commit, and no functional change
either.
Discussion: 20150218213255.GC6717@tamriel.snowman.net
Reviewed-By: Stephen Frost, Andres Freund
In 6f9bd50eab, we modified
expand_security_quals() to tell expand_security_qual() about when the
current RTE was the targetRelation. Unfortunately, that commit
initialized the targetRelation variable used outside of the loop over
the RTEs instead of at the start of it.
This patch moves the variable and the initialization of it into the
loop, where it should have been to begin with.
Pointed out by Dean Rasheed.
Back-patch to 9.4 as the original commit was.
Previously, we cached domain constraints for the life of a query, or
really for the life of the FmgrInfo struct that was used to invoke
domain_in() or domain_check(). But plpgsql (and probably other places)
are set up to cache such FmgrInfos for the whole lifespan of a session,
which meant they could be enforcing really stale sets of constraints.
On the other hand, searching pg_constraint once per query gets kind of
expensive too: testing says that as much as half the runtime of a
trivial query such as "SELECT 0::domaintype" went into that.
To fix this, delegate the responsibility for tracking a domain's
constraints to the typcache, which has the infrastructure needed to
detect syscache invalidation events that signal possible changes.
This not only removes unnecessary repeat reads of pg_constraint,
but ensures that we never apply stale constraint data: whatever we
use is the current data according to syscache rules.
Unfortunately, the current configuration of the system catalogs means
we have to flush cached domain-constraint data whenever either pg_type
or pg_constraint changes, which happens rather a lot (eg, creation or
deletion of a temp table will do it). It might be worth rearranging
things to split pg_constraint into two catalogs, of which the domain
constraint one would probably be very low-traffic. That's a job for
another patch though, and in any case this patch should improve matters
materially even with that handicap.
This patch makes use of the recently-added memory context reset callback
feature to manage the lifespan of domain constraint caches, so that we
don't risk deleting a cache that might be in the midst of evaluation.
Although this is a bug fix as well as a performance improvement, no
back-patch. There haven't been many if any field complaints about
stale domain constraint checks, so it doesn't seem worth taking the
risk of modifying data structures as basic as MemoryContexts in back
branches.
This makes "ALTER TABLE tabname ALTER tscol TYPE ... USING tscol AT TIME
ZONE 'UTC'" skip rewriting the table when altering from "timestamp" to
"timestamptz" or vice versa. While it would be nicer still to optimize
this in the absence of the USING clause given timezone==UTC, transform
functions must consult IMMUTABLE facts only.
Part of the intent of the parameterized-path mechanism was to handle
star-schema queries efficiently, but some overly-restrictive search
limiting logic added in commit e2fa76d80b
prevented such cases from working as desired. Fix that and add a
regression test about it. Per gripe from Marc Cousin.
This is arguably a bug rather than a new feature, so back-patch to 9.2
where parameterized paths were introduced.
Add documentation about the new reset callback mechanism.
Also, at long last, recast the existing text so that it describes the
current context mechanisms as established fact rather than something
we're going to implement. Shoulda done that in 2001 or so ...
The type variable must get set on first iteration of the while loop,
but there are reasonably modern gcc versions that don't realize that.
Initialize it with a dummy value. This undoes a removal of initialization
in commit 654809e770.
That is, MemoryContextReset() now means what was formerly meant by
MemoryContextResetAndDeleteChildren(), and the latter is now just a macro
alias for the former. If you really want the functionality that was
formerly provided by MemoryContextReset(), what you have to do is
MemoryContextResetChildren() plus MemoryContextResetOnly() (which is a
new API to reset *only* the named context and not touch its children).
The reason for this change is that near fifteen years of experience has
proven that there is noplace where old-style MemoryContextReset() is
actually what you want. Making that the default behavior has led to lots
of context-leakage bugs, while we've not found anyplace where it's actually
necessary to keep the child contexts; at least the standard regression
tests do not reveal anyplace where this change breaks anything. And there
are upcoming patches that will introduce additional reasons why child
contexts need to be removed.
We could change existing calls of MemoryContextResetAndDeleteChildren to be
just MemoryContextReset, but for the moment I'll leave them alone; they're
not costing anything.
The way that columns are added to a view is by calling
AlterTableInternal with special subtype AT_AddColumnToView; but that
subtype is changed to AT_AddColumnRecurse by ATPrepAddColumn. This has
no visible effect in the current code, since views cannot have
inheritance children (thus the recursion step is a no-op) and adding a
column to a view is executed identically to doing it to a table; but it
does make a difference for future event trigger code keeping track of
commands, because the current situation leads to confusing the case with
a normal ALTER TABLE ADD COLUMN.
Fix the problem by passing a flag to ATPrepAddColumn to prevent it from
changing the command subtype. The event trigger code can then properly
ignore the subcommand. (We could remove the call to ATPrepAddColumn,
since views are never typed, and there is never a need for recursion,
which are the two conditions that are checked by ATPrepAddColumn; but it
seems more future-proof to keep the call in place.)
This allows cleanup actions to be registered to be called just before a
particular memory context's contents are flushed (either by deletion or
MemoryContextReset). The patch in itself has no use-cases for this, but
several likely reasons for wanting this exist.
In passing, per discussion, rearrange some boolean fields in struct
MemoryContextData so as to avoid wasted padding space. For safety,
this requires making allowInCritSection's existence unconditional;
but I think that's a better approach than what was there anyway.
Typo "aggreagate" appeared three times, and the return value of function
JsonbIteratorNext() was being assigned to an int variable in a bunch of
places.
When a composite type being used in a typed table is modified by way
of ALTER TYPE, a table rewrite occurs appearing to come from ALTER TYPE.
The existing event_trigger.c code was unable to cope with that
and raised a spurious error. The fix is just to accept that command
tag for the event, and document this properly.
Noted while fooling with deparsing of DDL commands. This appears to be
an oversight in commit 618c9430a.
Thanks to Mark Wong for documentation wording help.
Commit ab14a73a6c raised an error in these cases and later the
behaviour was copied to jsonb. This is what the XML code, which we
then adopted, does, as the XSD types don't accept infinite values.
However, json dates and timestamps are just strings as far as json is
concerned, so there is no reason not to render these values as
'infinity'.
The json portion of this is backpatched to 9.4 where the behaviour was
introduced. The jsonb portion only affects the development branch.
Per gripe on pgsql-general.
Up to now RecordTransactionCommit() waited for WAL to be flushed (if
synchronous_commit != off) and to be synchronously replicated (if
enabled), even if a transaction did not have a xid assigned. The primary
reason for that is that sequence's nextval() did not assign a xid, but
are worthwhile to wait for on commit.
This can be problematic because sometimes read only transactions do
write WAL, e.g. HOT page prune records. That then could lead to read only
transactions having to wait during commit. Not something people expect
in a read only transaction.
This lead to such strange symptoms as backends being seemingly stuck
during connection establishment when all synchronous replicas are
down. Especially annoying when said stuck connection is the standby
trying to reconnect to allow syncrep again...
This behavior also is involved in a rather complicated <= 9.4 bug where
the transaction started by catchup interrupt processing waited for
syncrep using latches, but didn't get the wakeup because it was already
running inside the same overloaded signal handler. Fix the issue here
doesn't properly solve that issue, merely papers over the problems. In
9.5 catchup interrupts aren't processed out of signal handlers anymore.
To fix all this, make nextval() acquire a top level xid, and only wait for
transaction commit if a transaction both acquired a xid and emitted WAL
records. If only a xid has been assigned we don't uselessly want to
wait just because of writes to temporary/unlogged tables; if only WAL
has been written we don't want to wait just because of HOT prunes.
The xid assignment in nextval() is unlikely to cause overhead in
real-world workloads. For one it only happens SEQ_LOG_VALS/32 values
anyway, for another only usage of nextval() without using the result in
an insert or similar is affected.
Discussion: 20150223165359.GF30784@awork2.anarazel.de,
369698E947874884A77849D8FE3680C2@maumau,
5CF4ABBA67674088B3941894E22A0D25@maumau
Per complaint from maumau and Thom Brown
Backpatch all the way back; 9.0 doesn't have syncrep, but it seems
better to be consistent behavior across all maintained branches.
The RLS patch added a hasRowSecurity field to PlannerGlobal and
PlannedStmt but didn't update nodes/copyfuncs.c and nodes/outfuncs.c to
reflect those additional fields.
Correct that by adding entries to the appropriate functions for those
fields.
Pointed out by Robert.
In expand_security_qual(), we were handling locking correctly when a
PlanRowMark existed, but not when we were working with the target
relation (which doesn't have any PlanRowMarks, but the subquery created
for the security barrier quals still needs to lock the rows under it).
Noted by Etsuro Fujita when working with the Postgres FDW, which wasn't
properly issuing a SELECT ... FOR UPDATE to the remote side under a
DELETE.
Back-patch to 9.4 where updatable security barrier views were
introduced.
Per discussion with Etsuro and Dean Rasheed.
When I rewrote this in commit 56a79a869b,
I forgot that it's possible for the input array type to change from one
call to the next (this can happen when applying the function to
pg_statistic columns, for instance). Fix that.
The "simple" path for printing VALUES clauses doesn't work if we need
to attach nondefault column aliases, because there's noplace to do that
in the minimal VALUES() syntax. So modify get_simple_values_rte() to
detect nondefault aliases and treat that as a non-simple case. This
further exposes that the "non-simple" path never actually worked;
it didn't produce valid syntax. Fix that too. Per bug #12789 from
Curtis McEnroe, and analysis by Andrew Gierth.
Back-patch to all supported branches. Before 9.3, this also requires
back-patching the part of commit 092d7ded29
that created get_simple_values_rte() to begin with; inserting the extra
test into the old factorization of that logic would've been too messy.
There are a couple of places in our grammar that fail to be strict LALR(1),
by requiring more than a single token of lookahead to decide what to do.
Up to now we've dealt with that by using a filter between the lexer and
parser that merges adjacent tokens into one in the places where two tokens
of lookahead are necessary. But that creates a number of user-visible
anomalies, for instance that you can't name a CTE "ordinality" because
"WITH ordinality AS ..." triggers folding of WITH and ORDINALITY into one
token. I realized that there's a better way.
In this patch, we still do the lookahead basically as before, but we never
merge the second token into the first; we replace just the first token by
a special lookahead symbol when one of the lookahead pairs is seen.
This requires a couple extra productions in the grammar, but it involves
fewer special tokens, so that the grammar tables come out a bit smaller
than before. The filter logic is no slower than before, perhaps a bit
faster.
I also fixed the filter logic so that when backing up after a lookahead,
the current token's terminator is correctly restored; this eliminates some
weird behavior in error message issuance, as is shown by the one change in
existing regression test outputs.
I believe that this patch entirely eliminates odd behaviors caused by
lookahead for WITH. It doesn't really improve the situation for NULLS
followed by FIRST/LAST unfortunately: those sequences still act like a
reserved word, even though there are cases where they should be seen as two
ordinary identifiers, eg "SELECT nulls first FROM ...". I experimented
with additional grammar hacks but couldn't find any simple solution for
that. Still, this is better than before, and it seems much more likely
that we *could* somehow solve the NULLS case on the basis of this filter
behavior than the previous one.
The tar format (at least the version we are using), does not support
file names or symlink targets longer than 99 bytes. Until now, the tar
creation code would silently truncate any names that are too long. (Its
original application was pg_dump, where this never happens.) This
creates problems when running base backups over the replication
protocol.
The most important problem is when a tablespace path is longer than 99
bytes, which will result in a truncated tablespace path being backed up.
Less importantly, the basebackup protocol also promises to back up any
other files it happens to find in the data directory, which would also
lead to file name truncation if someone put a file with a long name in
there.
Now both of these cases result in an error during the backup.
Add tests that fail when a too-long file name or symlink is attempted to
be backed up.
Reviewed-by: Robert Hass <robertmhaas@gmail.com>
Use a different A_Expr_Kind for LIKE/ILIKE/SIMILAR TO constructs, so that
they can be distinguished from direct invocation of the underlying
operators. Also, postpone selection of the operator name when transforming
"x IN (select)" to "x = ANY (select)", so that those syntaxes can be told
apart at parse analysis time.
I had originally thought I'd also have to do something special for the
syntaxes IS NOT DISTINCT FROM, IS NOT DOCUMENT, and x NOT IN (SELECT...),
which the grammar translates as though they were NOT (construct).
On reflection though, we can distinguish those cases reliably by noting
whether the parse location shown for the NOT is the same as for its child
node. This only requires tweaking the parse locations for NOT IN, which
I've done here.
These changes should have no effect outside the parser; they're just in
support of being able to give accurate warnings for planned operator
precedence changes.
COMMENT, SECURITY LABEL, and GRANT/REVOKE now also fire
ddl_command_start and ddl_command_end event triggers, when they operate
on database-local objects.
Reviewed-By: Michael Paquier, Andres Freund, Stephen Frost
Instead of having a single knob (checkpoint_segments) that both triggers
checkpoints, and determines how many checkpoints to recycle, they are now
separate concerns. There is still an internal variable called
CheckpointSegments, which triggers checkpoints. But it no longer determines
how many segments to recycle at a checkpoint. That is now auto-tuned by
keeping a moving average of the distance between checkpoints (in bytes),
and trying to keep that many segments in reserve. The advantage of this is
that you can set max_wal_size very high, but the system won't actually
consume that much space if there isn't any need for it. The min_wal_size
sets a floor for that; you can effectively disable the auto-tuning behavior
by setting min_wal_size equal to max_wal_size.
The max_wal_size setting is now the actual target size of WAL at which a
new checkpoint is triggered, instead of the distance between checkpoints.
Previously, you could calculate the actual WAL usage with the formula
"(2 + checkpoint_completion_target) * checkpoint_segments + 1". With this
patch, you set the desired WAL usage with max_wal_size, and the system
calculates the appropriate CheckpointSegments with the reverse of that
formula. That's a lot more intuitive for administrators to set.
Reviewed by Amit Kapila and Venkata Balaji N.
Replace the if-switch-case constructs with two conversion tables,
containing all the supported conversions between human-readable unit
strings and the base units used in GUC variables. This makes the code
easier to read, and makes adding new units simpler.
When LockBufferForCleanup() has to wait for getting a cleanup lock on a
buffer it does so by setting a flag in the buffer header and then wait
for other backends to signal it using ProcWaitForSignal().
Unfortunately LockBufferForCleanup() missed that ProcWaitForSignal() can
return for other reasons than the signal it is hoping for. If such a
spurious signal arrives the wait flags on the buffer header will still
be set. That then triggers "ERROR: multiple backends attempting to wait
for pincount 1".
The fix is simple, unset the flag if still set when retrying. That
implies an additional spinlock acquisition/release, but that's unlikely
to matter given the cost of waiting for a cleanup lock. Alternatively
it'd have been possible to move responsibility for maintaining the
relevant flag to the waiter all together, but that might have had
negative consequences due to possible floods of signals. Besides being
more invasive.
This looks to be a very longstanding bug. The relevant code in
LockBufferForCleanup() hasn't changed materially since its introduction
and ProcWaitForSignal() was documented to return for unrelated reasons
since 8.2. The master only patch series removing ImmediateInterruptOK
made it much easier to hit though, as ProcSendSignal/ProcWaitForSignal
now uses a latch shared with other tasks.
Per discussion with Kevin Grittner, Tom Lane and me.
Backpatch to all supported branches.
Discussion: 11553.1423805224@sss.pgh.pa.us
Previously when the standby server failed to retrieve WAL files from any sources
(i.e., streaming replication, local pg_xlog directory or WAL archive), it always
waited for five seconds (hard-coded) before the next attempt. For example,
this is problematic in warm-standby because restore_command can fail
every five seconds even while new WAL file is expected to be unavailable for
a long time and flood the log files with its error messages.
This commit adds new parameter, wal_retrieve_retry_interval, to control that
wait time.
Alexey Vasiliev and Michael Paquier, reviewed by Andres Freund and me.
We did not need a location tag on NullTest or BooleanTest before, because
no error messages referred directly to their locations. That's planned
to change though, so add these fields in a separate housekeeping commit.
Catversion bump because stored rules may change.
transformExpr() has for many years had provisions to do nothing when
applied to an already-transformed expression tree. However, this was
always ugly and of dubious reliability, so we'd be much better off without
it. The primary historical reason for it was that gram.y sometimes
returned multiple links to the same subexpression, which is no longer true
as of my BETWEEN fixes. We'd also grown some lazy hacks in CREATE TABLE
LIKE (failing to distinguish between raw and already-transformed index
specifications) and one or two other places.
This patch removes the need for and support for re-transforming already
transformed expressions. The index case is dealt with by adding a flag
to struct IndexStmt to indicate that it's already been transformed;
which has some benefit anyway in that tablecmds.c can now Assert that
transformation has happened rather than just assuming. The other main
reason was some rather sloppy code for array type coercion, which can
be fixed (and its performance improved too) by refactoring.
I did leave transformJoinUsingClause() still constructing expressions
containing untransformed operator nodes being applied to Vars, so that
transformExpr() still has to allow Var inputs. But that's a much narrower,
and safer, special case than before, since Vars will never appear in a raw
parse tree, and they don't have any substructure to worry about.
In passing fix some oversights in the patch that added CREATE INDEX
IF NOT EXISTS (missing processing of IndexStmt.if_not_exists). These
appear relatively harmless, but still sloppy coding practice.
Previously, gram.y itself converted BETWEEN into AND (or AND/OR) nests of
expression comparisons. This was always as bogus as could be, but fixing
it hasn't risen to the top of the to-do list. The present patch invents an
A_Expr representation for BETWEEN expressions, and does the expansion to
comparison trees in parse_expr.c which is at least a slightly saner place
to be doing semantic conversions. There should be no change in the post-
parse-analysis results.
This does nothing for the semantic issues with BETWEEN (dubious connection
to btree-opclass semantics, and multiple evaluation of possibly volatile
subexpressions) ... but it's a necessary preliminary step before we could
fix any of that. The main immediate benefit is that preserving BETWEEN as
an identifiable raw-parse-tree construct will enable better error messages.
While at it, fix the code so that multiply-referenced subexpressions are
physically duplicated before being passed through transformExpr(). This
gets rid of one of the principal reasons why transformExpr() has
historically had to allow already-processed input.
Everywhere else in the file, "context" is of type MemoryContext and
"set" is of type AllocSet. AllocSetContextCreate uses a variable of
type AllocSet, so rename it from "context" to "set".
Previously, each new array created a new memory context that started
out at 8kB. This is incredibly wasteful when there are lots of small
groups of just a few elements each.
Change initArrayResult() and friends to accept a "subcontext" argument
to indicate whether the caller wants the ArrayBuildState allocated in
a new subcontext or not. If not, it can no longer be released
separately from the rest of the memory context.
Fixes bug report by Frank van Vugt on 2013-10-19.
Tomas Vondra. Reviewed by Ali Akbar, Tom Lane, and me.
Bootstrap determines whether a column is null based on simple builtin
rules. Those work surprisingly well, but nonetheless a few existing
columns aren't set correctly. Additionally there is at least one patch
sent to hackers where forcing the nullness of a column would be helpful.
The boostrap format has gained FORCE [NOT] NULL for this, which will be
emitted by genbki.pl when BKI_FORCE_(NOT_)?NULL is specified for a
column in a catalog header.
This patch doesn't change the marking of any existing columns.
Discussion: 20150215170014.GE15326@awork2.anarazel.de
This requires changing quite a few places that were depending on
sizeof(HeapTupleHeaderData), but it seems for the best.
Michael Paquier, some adjustments by me
Commit 8001fe67a3 introduced this
requirement, but per discussion, we want to avoid requirements of
this type to make things easier on the calling code. An especially
important consideration is that this may be used in frontend code,
not just the backend.
Asif Naeem, reviewed by Michael Paquier
clang complains about this, not unreasonably, so define another struct
that's explicitly for a WordEntryPos with exactly one element.
While at it, get rid of pretty dubious use of a static variable for
more than one purpose --- if it were being treated as const maybe
I'd be okay with this, but it isn't.
This works by keeping a per-subtransaction record of the ins/upd/del
counters before the truncate, and then resetting them; this record is
useful to return to the previous state in case the truncate is rolled
back, either in a subtransaction or whole transaction. The state is
propagated upwards as subtransactions commit.
When the per-table data is sent to the stats collector, a flag indicates
to reset the live/dead counters to zero as well.
Catalog version bumped due to the change in pgstat format.
Author: Alexander Shulgin
Discussion: 1007.1207238291@sss.pgh.pa.us
Discussion: 548F7D38.2000401@BlueTreble.com
Reviewed-by: Álvaro Herrera, Jim Nasby
Replace some bogus "x[1]" declarations with "x[FLEXIBLE_ARRAY_MEMBER]".
Aside from being more self-documenting, this should help prevent bogus
warnings from static code analyzers and perhaps compiler misoptimizations.
This patch is just a down payment on eliminating the whole problem, but
it gets rid of a lot of easy-to-fix cases.
Note that the main problem with doing this is that one must no longer rely
on computing sizeof(the containing struct), since the result would be
compiler-dependent. Instead use offsetof(struct, lastfield). Autoconf
also warns against spelling that offsetof(struct, lastfield[0]).
Michael Paquier, review and additional fixes by me.
Per discussion, this could be useful for purposes such as programmatically
detecting a nonresponding stats collector. We already have the timestamp
anyway, it's just a matter of providing a SQL-accessible function to fetch
it.
Matt Kelly, reviewed by Jim Nasby
There wasn't any good reason for a single C function to implement both
these SQL functions: it saved very little code overall, and it required
significant pushups to re-determine at runtime which case applied. Redoing
it as two functions ends up with just slightly more lines of code, but it's
simpler to understand, and faster too because we need not repeat syscache
lookups on every call.
An important side benefit is that this eliminates the only case in which
different aliases of the same C function had both anyarray and anyelement
arguments at the same position, which would almost always be a mistake.
The opr_sanity regression test will now notice such mistakes since there's
no longer a valid case where it happens.
The original representation uses "opcname for amname", which is good
enough; but if we replace "for" with "using", we can apply the returned
identity directly in a DROP command, as in
DROP OPERATOR CLASS opcname USING amname
This slightly simplifies code using object identities to programatically
execute commands on these kinds of objects.
Note backwards-incompatible change:
The previous representation dates back to 9.3 when object identities
were introduced by commit f8348ea3, but we don't want to change the
behavior on released branches unnecessarily and so this is not
backpatched.
The previous coding in EXPLAIN always labeled a ModifyTable node with the
name of the target table affected by its first child plan. When originally
written, this was necessarily the parent table of the inheritance tree,
so everything was unconfusing. But when we added NO INHERIT constraints,
it became possible for the parent table to be deleted from the plan by
constraint exclusion while still leaving child tables present. This led to
the ModifyTable plan node being labeled with the first surviving child,
which was deemed confusing. Fix it by retaining the parent table's RT
index in a new field in ModifyTable.
Etsuro Fujita, reviewed by Ashutosh Bapat and myself
After removal, the next_sibling pointer of a node was sometimes incorrectly
left to point to another node in the heap, which meant that a node was
sometimes linked twice into the heap. Surprisingly that didn't cause any
crashes in my testing, but it was clearly wrong and could easily segfault
in other scenarios.
Also always keep the prev_or_parent pointer as NULL on the root node. That
was not a correctness issue AFAICS, but let's be tidy.
Add a debugging function, to dump the contents of a pairing heap as a
string. It's #ifdef'd out, as it's not used for anything in any normal
code, but it was highly useful in debugging this. Let's keep it handy for
further reference.
The part of the comparison function that was supposed to keep heap tuples
ahead of index items was backwards. It would not lead to incorrect results,
but it is more efficient to return heap tuples first, before scanning more
index pages, when both have the same distance.
Alexander Korotkov
In investigating yesterday's crash report from Hugo Osvaldo Barrera, I only
looked back as far as commit f3aec2c7f5 where the breakage occurred
(which is why I thought the IPv4-in-IPv6 business was undocumented). But
actually the logic dates back to commit 3c9bb8886d and was simply
broken by erroneous refactoring in the later commit. A bit of archives
excavation shows that we added the whole business in response to a report
that some 2003-era Linux kernels would report IPv4 connections as having
IPv4-in-IPv6 addresses. The fact that we've had no complaints since 9.0
seems to be sufficient confirmation that no modern kernels do that, so
let's just rip it all out rather than trying to fix it.
Do this in the back branches too, thus essentially deciding that our
effective behavior since 9.0 is correct. If there are any platforms on
which the kernel reports IPv4-in-IPv6 addresses as such, yesterday's fix
would have made for a subtle and potentially security-sensitive change in
the effective meaning of IPv4 pg_hba.conf entries, which does not seem like
a good thing to do in minor releases. So let's let the post-9.0 behavior
stand, and change the documentation to match it.
In passing, I failed to resist the temptation to wordsmith the description
of pg_hba.conf IPv4 and IPv6 address entries a bit. A lot of this text
hasn't been touched since we were IPv4-only.
The previous coding copied garbage into a local variable, pretty much
ensuring that the intended test of an IPv6 connection address against a
promoted IPv4 address from pg_hba.conf would never match. The lack of
field complaints likely indicates that nobody realized this was supposed
to work, which is unsurprising considering that no user-facing docs suggest
it should work.
In principle this could have led to a SIGSEGV due to reading off the end of
memory, but since the source address would have pointed to somewhere in the
function's stack frame, that's quite unlikely. What led to discovery of
the bug is Hugo Osvaldo Barrera's report of a crash after an OS upgrade,
which is probably because he is now running a system in which memcpy raises
abort() upon detecting overlapping source and destination areas. (You'd
have to additionally suppose some things about the stack frame layout to
arrive at this conclusion, but it seems plausible.)
This has been broken since the code was added, in commit f3aec2c7f5,
so back-patch to all supported branches.
This reverts the removal of the call in commit (272923a0). It turns out it
wasn't superfluous after all: without it, renegotiation fails if a client
certificate was used. The rest of the changes in that commit are still OK
and not reverted.
Per investigation of bug #12769 by Arne Scheffer, although this doesn't fix
the reported bug yet.
The four functions array_ref, array_set, array_get_slice, array_set_slice
have traditionally declared their array inputs and results as being of type
"ArrayType *". This is a lie, and has been since Berkeley days, because
they actually also support "fixed-length array" types such as "name" and
"point"; not to mention that the inputs could be toasted. These values
should be declared Datum instead to avoid confusion. The current coding
already risks possible misoptimization by compilers, and it'll get worse
when "expanded" array representations become a valid alternative.
However, there's a fair amount of code using array_ref and array_set with
arrays that *are* known to be ArrayType structures, and there might be more
such places in third-party code. Rather than cluttering those call sites
with PointerGetDatum/DatumGetArrayTypeP cruft, what I did was to rename the
existing functions to array_get_element/array_set_element, fix their
signatures, then reincarnate array_ref/array_set as backwards compatibility
wrappers.
array_get_slice/array_set_slice have no such constituency in the core code,
and probably not in third-party code either, so I just changed their APIs.
In commit bf7ca15875 I introduced an
assumption that an RTE referenced by a whole-row Var must have a valid eref
field. This is false for RTEs constructed by DoCopy, and there are other
places taking similar shortcuts. Perhaps we should make all those places
go through addRangeTableEntryForRelation or its siblings instead of having
ad-hoc logic, but the most reliable fix seems to be to make the new code in
ExecEvalWholeRowVar cope if there's no eref. We can reasonably assume that
there's no need to insert column aliases if no aliases were provided.
Add a regression test case covering this, and also verifying that a sane
column name is in fact available in this situation.
Although the known case only crashes in 9.4 and HEAD, it seems prudent to
back-patch the code change to 9.2, since all the ingredients for a similar
failure exist in the variant patch applied to 9.3 and 9.2.
Per report from Jean-Pierre Pelletier.
The client socket is always in non-blocking mode, and if we actually want
blocking behaviour, we emulate it by sleeping and retrying. But we have
retry loops at different layers for reads and writes, which was confusing.
To simplify, remove all the sleeping and retrying code from the lower
levels, from be_tls_read and secure_raw_read and secure_raw_write, and put
all the logic in secure_read() and secure_write().
At least in all modern versions of OpenSSL, it is enough to call
SSL_renegotiate() once, and then forget about it. Subsequent SSL_write()
and SSL_read() calls will finish the handshake.
The SSL_set_session_id_context() call is unnecessary too. We only have
one SSL context, and the SSL session was created with that to begin with.
This omission leaked one PGresult per WAL streaming cycle, which possibly
would never be enough to notice in the real world, but it's still a leak.
Per Coverity. Back-patch to 9.3 where the error was introduced.
We'd leak the ident_serv data structure if the second pg_getaddrinfo_all
(the one for the local address) failed. This is not of great consequence
because a failure return here just leads directly to backend exit(), but
if this function is going to try to clean up after itself at all, it should
not have such holes in the logic. Try to fix it in a future-proof way by
having all the failure exits go through the same cleanup path, rather than
"optimizing" some of them.
Per Coverity. Back-patch to 9.2, which is as far back as this patch
applies cleanly.
Back in commit 400e2c9344 I rewrote GEQO's
gimme_tree function to improve its heuristic for modifying the given tour
into a legal join order. In what can only be called a fit of hubris,
I supposed that this new heuristic would *always* find a legal join order,
and ripped out the old logic that allowed gimme_tree to sometimes fail.
The folly of this is exposed by bug #12760, in which the "greedy" clumping
behavior of merge_clump() can lead it into a dead end which could only be
recovered from by un-clumping. We have no code for that and wouldn't know
exactly what to do with it if we did. Rather than try to improve the
heuristic rules still further, let's just recognize that it *is* a
heuristic and probably must always have failure cases. So, put back the
code removed in the previous commit to allow for failure (but comment it
a bit better this time).
It's possible that this code was actually fully correct at the time and
has only been broken by the introduction of LATERAL. But having seen this
example I no longer have much faith in that proposition, so back-patch to
all supported branches.
Fix some issues I noticed while fooling with an extension to allow an
additional kind of toast pointer. Much of this is just comment
improvement, but there are a couple of actual bugs, which might or might
not be reachable today depending on what can happen during logical
decoding. An example is that toast_flatten_tuple() failed to cover the
possibility of an indirection pointer in its input. Back-patch to 9.4
just in case that is reachable now.
In HEAD, also correct some really minor issues with recent compression
reorganization, such as dangerously underparenthesized macros.
To get CRC functionality in a client program, you now need to link with
libpgcommon instead of libpgport. The CRC code has nothing to do with
portability, so libpgcommon is a better home. (libpgcommon didn't exist
when pg_crc.c was originally moved to src/port.)
Remove the possibility to get CRC functionality by just #including
pg_crc_tables.h. I'm not aware of any extensions that actually did that and
couldn't simply link with libpgcommon.
This also moves the pg_crc.h header file from src/include/utils to
src/include/common, which will require changes to any external programs
that currently does #include "utils/pg_crc.h". That seems acceptable, as
include/common is clearly the right home for it now, and the change needed
to any such programs is trivial.
The meta data of PGLZ symbolized by PGLZ_Header is removed, to make
the compression and decompression code independent on the backend-only
varlena facility. PGLZ_Header is being used to store some meta data
related to the data being compressed like the raw length of the uncompressed
record or some varlena-related data, making it unpluggable once PGLZ is
stored in src/common as it contains some backend-only code paths with
the management of varlena structures. The APIs of PGLZ are reworked
at the same time to do only compression and decompression of buffers
without the meta-data layer, simplifying its use for a more general usage.
On-disk format is preserved as well, so there is no incompatibility with
previous major versions of PostgreSQL for TOAST entries.
Exposing compression and decompression APIs of pglz makes possible its
use by extensions and contrib modules. Especially this commit is required
for upcoming WAL compression feature so that the WAL reader facility can
decompress the WAL data by using pglz_decompress.
Michael Paquier, reviewed by me.
We reserve space for the full amount, not one less. The affected checks
deal with localized month and day names. Today's DCH_MAX_ITEM_SIZ value
would suffice for a 60-byte day name, while the longest known is the
49-byte mn_CN.utf-8 word for "Saturday." Thus, the upshot of this
change is merely to avoid misdirecting future readers of the code; users
are not expected to see errors either way.
Tom Lane
Andrew Dunstan
Alvaro Herrera
Heikki Linnakangas
Bruce Momjian
Andres Freund
Fujii Masao
Simon Riggs
Peter Eisentraut
Robert Haas
Noah Misch
Magnus Hagander
Stephen Frost
Tatsuo Ishii
Kevin Grittner
Jeff Davis