Specifically, pass the outer plan's PlanState instead of our own
PlanState. At present, ExecContextForcesOids doesn't actually care
which PlanState we pass; it just looks through to the underlying
EState to find the result relation or top-level eflags. However, in
the future it might care. If that happens, and if our goal is to get
a tuple descriptor that matches that of the outer plan, then I think
what we care about is whether the outer plan's context forces OIDs,
rather than whether our own context forces OIDs, just as we use the
outer node's target list rather than our own.
Patch by me, reviewed by Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoZ0ZL=cesZFq8c9NnfK6bqy-wwUd3_74iYGodYrSoQ7Fw@mail.gmail.com
Currently, there are no known consequences of this oversight, so no
back-patch. Several of the EXEC_FLAG_* constants aren't usable in
parallel mode anyway, and potential problems related to the presence
or absence of OIDs (see EXEC_FLAG_WITH_OIDS, EXEC_FLAG_WITHOUT_OIDS)
seem at present to be masked by the unconditional projection step
performed by Gather and Gather Merge. In general, however, it seems
important that all participants agree on the values of these flags,
which modify executor behavior globally, and a pending patch to skip
projection in Gather (Merge) would be outright broken in certain cases
without this fix.
Patch by me, based on investigation of a test case provided by Amit
Kapila. This patch was also reviewed by Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoZ0ZL=cesZFq8c9NnfK6bqy-wwUd3_74iYGodYrSoQ7Fw@mail.gmail.com
Merge ri_restrict_del and ri_restrict_upd into one function ri_restrict.
Create a function ri_setnull that is the common implementation of
RI_FKey_setnull_del and RI_FKey_setnull_upd. Likewise create a function
ri_setdefault that is the common implementation of RI_FKey_setdefault_del
and RI_FKey_setdefault_upd. All of these pairs of functions were identical
except for needing to check for no-actual-key-change in the UPDATE cases;
the one extra if-test is a small price to pay for saving so much code.
Aside from removing about 400 lines of essentially duplicate code, this
allows us to recognize that we were uselessly caching two identical plans
whenever there were pairs of triggers using these duplicated functions
(which is likely very common).
Ildar Musin, reviewed by Ildus Kurbangaliev
Discussion: https://postgr.es/m/ca7064a7-6adc-6f22-ca47-8615ba9425a5@postgrespro.ru
Python Py*_New() functions can fail and return NULL in out-of-memory
conditions. The previous code handled that inconsistently or not at
all. This change organizes that better. If we are in a function that
is called from Python, we just check for failure and return NULL
ourselves, which will cause any exception information to be passed up.
If we are called from PostgreSQL, we consistently create an "out of
memory" error.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
The documentation says that these functions skip one input character
per literal (non-pattern) format character. Actually, though, they
skipped one input *byte* per literal *byte*, which could be hugely
confusing if either data or format contained multibyte characters.
To fix, adjust the FormatNode representation and parse_format() so
that multibyte format characters are stored as one FormatNode not
several, and adjust the data-skipping bits to advance by pg_mblen()
not necessarily one byte. There's no user-visible behavior change
on the to_char() side, although the internal representation changes.
Commit e87d4965b had already fixed most places where we skip characters
on the basis of non-literal format patterns to advance by characters
not bytes, but this gets one more place, the SKIP_THth macro. I think
everything in formatting.c gets that right now.
It'd be nice to have some regression test cases covering this behavior;
but of course there's no way to do so in an encoding-agnostic way, and
many of the interesting aspects would also require unportable locale
selections. So I've not bothered here.
Discussion: https://postgr.es/m/28186.1510957703@sss.pgh.pa.us
This code evidently intended to treat backslash as an escape character
within double-quoted substrings, but it was sufficiently confused that
cases like ..."foo\\"... did not work right: the second backslash
managed to quote the double-quote after it, despite being quoted itself.
Rewrite to get that right, while preserving the existing behavior
outside double-quoted substrings, which is that backslash isn't special
except in the combination \".
Comparing to Oracle, it seems that their version of to_char() for
timestamps allows literal alphanumerics only within double quotes, while
non-alphanumerics are allowed outside quotes; backslashes aren't special
anywhere; there is no way at all to emit a literal double quote.
(Bizarrely, their to_char() for numbers is different; it doesn't allow
literal text at all AFAICT.) The fact that they don't treat backslash
as special justifies our existing behavior for backslash outside double
quotes. I considered making backslash inside double quotes act the same
way (ie, special only if before "), which in a green field would be a
more consistent behavior. But that would likely break more existing SQL
code than what this patch does.
Add some test cases illustrating this behavior. (Only the last new
case actually changes behavior in this commit.)
Little of this behavior was documented, either, so fix that.
Discussion: https://postgr.es/m/3626.1510949486@sss.pgh.pa.us
This is the basic feature set using OpenSSL to support the feature. In
order to allow the frontend and the backend to fetch the sent and
expected TLS Finished messages, a PG-like API is added to be able to
make the interface pluggable for other SSL implementations.
This commit also adds a infrastructure to facilitate the addition of
future channel binding types as well as libpq parameters to control the
SASL mechanism names and channel binding names. Those will be added by
upcoming commits.
Some tests are added to the SSL test suite to test SCRAM authentication
with channel binding.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Since those scripts haven't worked at all in macOS releases of 2014
and later, and aren't the recommended way to do it on any release
since 2005, there seems little point carrying them into the future.
It's very unlikely that anyone would be installing PG >= 11 on a
macOS release where they couldn't use contrib/start-scripts/macos/.
Discussion: https://postgr.es/m/31338.1510763554@sss.pgh.pa.us
The scripts in contrib/start-scripts/osx don't work at all on macOS
10.10 (Yosemite) or later, because they depend on SystemStarter which
Apple deprecated long ago and removed in 10.10. Add a new subdirectory
contrib/start-scripts/macos with scripts that use the newer launchd
infrastructure.
Since this problem is independent of which Postgres version you're using,
back-patch to all supported branches.
Discussion: https://postgr.es/m/31338.1510763554@sss.pgh.pa.us
Non-data template patterns would consume characters whether or not those
characters were what the pattern expected, for example
SELECT TO_NUMBER('1234', '9,999');
produced 134 because the '2' got eaten by the comma pattern. This seems
undesirable, not least because it doesn't happen in Oracle. For the ','
and 'G' template patterns, we can fix this by consuming characters only
if they match what the pattern would output. For non-data patterns such
as 'L' and 'TH', it seems impractical to tighten things up to the point of
consuming only exact matches to what the pattern would output; but we can
improve matters quite a lot by redefining the behavior as "consume only
characters that aren't digits, signs, decimal point, or comma".
Also, fix it so that the behavior is to consume the number of *characters*
the pattern would output, not the number of *bytes*. The old coding would
do surprising things with non-ASCII currency symbols, for example. (It
would be good to apply that rule for literal text as well, but this commit
only fixes it for non-data patterns.)
Oliver Ford, reviewed by Thomas Munro and Nathan Wagner, and whacked around
a bit more by me
Discussion: https://postgr.es/m/CAGMVOdvpbMqPf9XWNzOwBpzJfErkydr_fEGhmuDGa015z97mwg@mail.gmail.com
It appears that proargmodes should always be set for variadic
functions, but satifies_hash_partition had it as NULL. In addition to
fixing the problem, add a regression test to guard against future
mistakes of this type.
Previously, executor nodes running in parallel worker processes didn't
have access to the dsm_segment object used for parallel execution. In
order to support resource management based on DSM segment lifetime,
they need that. So create a ParallelWorkerContext object to hold it
and pass it to all InitializeWorker functions.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=2W=cOkiZxcg6qiFQP-dHUe09aqTrEMM7yJDrHMhDv_RA@mail.gmail.com
Experimentation with modern MinGW (specifically the 5.0.2 version packaged
for Fedora 26) shows that its version of sys/stat.h *does* provide S_IRGRP
and friends, contrary to the expectation of win32_port.h. This results in
an astonishing number of compiler warnings, and perhaps in incorrect code
--- I'm not sure if the nonzero values supplied by MinGW's header actually
do anything. Hence, adjust win32_port.h to only define these macros if
<sys/stat.h> doesn't.
This might be worth back-patching, but given the lack of complaints so
far, I'm not too excited about it.
Fix PL/Python so that it can handle domains over composite, and so that
it enforces domain constraints correctly in other cases that were not
always done properly before. Notably, it didn't do arrays of domains
right (oversight in commit c12d570fa), and it failed to enforce domain
constraints when returning a composite type containing a domain field,
and if a transform function is being used for a domain's base type then
it failed to enforce domain constraints on the result. Also, in many
places it missed checking domain constraints on null values, because
the plpy_typeio code simply wasn't called for Py_None.
Rather than try to band-aid these problems, I made a significant
refactoring of the plpy_typeio logic. The existing design of recursing
for array and composite members is extended to also treat domains as
containers requiring recursion, and the APIs for the module are cleaned
up and simplified.
The patch also modifies plpy_typeio to rely on the typcache more than
it did before (which was pretty much not at all). This reduces the
need for repetitive lookups, and lets us get rid of an ad-hoc scheme
for detecting changes in composite types. I added a couple of small
features to typcache to help with that.
Although some of this is fixing bugs that long predate v11, I don't
think we should risk a back-patch: it's a significant amount of code
churn, and there've been no complaints from the field about the bugs.
Tom Lane, reviewed by Anthony Bykov
Discussion: https://postgr.es/m/24449.1509393613@sss.pgh.pa.us
The pending list must (for correctness) always be cleaned up by vacuum, and
should (for the avoidance of surprising behavior) always be cleaned up
by an explicit call to gin_clean_pending_list, but cleanup is optional
when inserting. The old logic got this backward: cleanup was forced
if (stats == NULL), but that's going to be *false* when vacuuming and
*true* for inserts.
Masahiko Sawada, reviewed by me.
Discussion: http://postgr.es/m/CAD21AoBLUSyiYKnTYtSAbC+F=XDjiaBrOUEGK+zUXdQ8owfPKw@mail.gmail.com
A handful of settings, most notably shared_preload_libraries, were
just plain the wrong place compared to their assigned config_group
value in guc.c (and thus pg_settings). In other cases the names of
the sections in postgresql.conf.sample were mildly different from
the corresponding entries in config_group_names[]. Make it all
consistent.
Adrián Escoms, reviewed by me.
Discussion: http://postgr.es/m/CACksPC2veEmFRYqwYepWYO9U7aFhAx6sYq+WqjTyHw7uV=E=pw@mail.gmail.com
If a PARAM_EXEC parameter is used below a Gather (Merge) but the InitPlan
that computes it is attached to or above the Gather (Merge), force the
value to be computed before starting parallelism and pass it down to all
workers. This allows us to use parallelism in cases where it previously
would have had to be rejected as unsafe. We do - in this case - lose the
optimization that the value is only computed if it's actually used. An
alternative strategy would be to have the first worker that needs the value
compute it, but one downside of that approach is that we'd then need to
select a parallel-safe path to compute the parameter value; it couldn't for
example contain a Gather (Merge) node. At some point in the future, we
might want to consider both approaches.
Independent of that consideration, there is a great deal more work that
could be done to make more kinds of PARAM_EXEC parameters parallel-safe.
This infrastructure could be used to allow a Gather (Merge) on the inner
side of a nested loop (although that's not a very appealing plan) and
cases where the InitPlan is attached below the Gather (Merge) could be
addressed as well using various techniques. But this is a good start.
Amit Kapila, reviewed and revised by me. Reviewing and testing from
Kuntal Ghosh, Haribabu Kommi, and Tushar Ahuja.
Discussion: http://postgr.es/m/CAA4eK1LV0Y1AUV4cUCdC+sYOx0Z0-8NAJ2Pd9=UKsbQ5Sr7+JQ@mail.gmail.com
Commit 0fb54de9a thought that this was only needed in VS2015 and later,
but buildfarm member woodlouse shows that at least VS2013 whines as
well. Let's just define it regardless of MSVC version; it should be
harmless enough in older releases.
Also, in the wake of ed9b3606d, it seems better to put it in win32_port.h
where <winsock2.h> is included.
Since this is only suppressing a pedantic compiler warning, I don't
feel a need for a back-patch.
Discussion: https://postgr.es/m/20124.1510850225@sss.pgh.pa.us
It's become apparent during testing that there are problems with at
least the testing regime. I don't think we should have it without a
working test regime, and the difficulties might indicate implementation
problems anyway, so I'm backing out the whole thing until that's sorted
out.
This reverts commits 74594849989f92cd8ce3a
Commit 9be95ef15 failed to cure all of the redundancy here: we were
actually calling get_major_server_version() three times for each
of the old and new data directories. While that's not enormously
expensive, it's still sloppy.
A. Akenteva
Discussion: https://postgr.es/m/f9266a85d918a3cf3a386b5148aee666@postgrespro.ru
This continues the work of commit 91aec93e6 by getting rid of a lot of
Windows-specific funny business in "section 0". Instead of including
pg_config_os.h in different places depending on platform, let's
standardize on putting it before the system headers, and in consequence
reduce win32.h to just what has to appear before the system headers or
the body of c.h (the latter category seems to include only PGDLLIMPORT
and PGDLLEXPORT). The rest of what was in win32.h is moved to a new
sub-include of port.h, win32_port.h. Some of what was in port.h seems
to better belong there too.
It's possible that I missed some declaration ordering dependency that
needs to be preserved, but hopefully the buildfarm will find that
out in short order.
Unlike the previous commit, no back-patch, since this is just cleanup
not a prerequisite for a bug fix.
Discussion: https://postgr.es/m/29650.1510761080@sss.pgh.pa.us
Move the sub-routines wrappers to check if a connection to a server is
fine or not into the test main module. This is useful for other tests
willing to check connectivity into a server.
Author: Michael Paquier <michael@paquier.xyz>
The module requires a preloaded library and the defect can't be cured by
a LOAD instruction in the test script. To achieve this we override the
installcheck target in the module's Makefile, and exclude ithe module in
vcregress.pl.
Along the way, revert commit 9989f92aab.
Code should be using true and false. Existing code can be changed to
those in a backward compatible way.
The definitions in the ecpg header files are left around to avoid
upsetting those users unnecessarily.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Some code is moved from partition.c, which has grown very quickly lately;
splitting the executor parts out might help to keep it from getting
totally out of control. Other code is moved from execMain.c. All is
moved to a new file execPartition.c. get_partition_for_tuple now has
a new interface that more clearly separates executor concerns from
generic concerns.
Amit Langote. A slight comment tweak by me.
Discussion: http://postgr.es/m/1f0985f8-3b61-8bc4-4350-baa6d804cb6d@lab.ntt.co.jp
Our initial work with int128 neglected alignment considerations, an
oversight that came back to bite us in bug #14897 from Vincent Lachenal.
It is unsurprising that int128 might have a 16-byte alignment requirement;
what's slightly more surprising is that even notoriously lax Intel chips
sometimes enforce that.
Raising MAXALIGN seems out of the question: the costs in wasted disk and
memory space would be significant, and there would also be an on-disk
compatibility break. Nor does it seem very practical to try to allow some
data structures to have more-than-MAXALIGN alignment requirement, as we'd
have to push knowledge of that throughout various code that copies data
structures around.
The only way out of the box is to make type int128 conform to the system's
alignment assumptions. Fortunately, gcc supports that via its
__attribute__(aligned()) pragma; and since we don't currently support
int128 on non-gcc-workalike compilers, we shouldn't be losing any platform
support this way.
Although we could have just done pg_attribute_aligned(MAXIMUM_ALIGNOF) and
called it a day, I did a little bit of extra work to make the code more
portable than that: it will also support int128 on compilers without
__attribute__(aligned()), if the native alignment of their 128-bit-int
type is no more than that of int64.
Add a regression test case that exercises the one known instance of the
problem, in parallel aggregation over a bigint column.
This will need to be back-patched, along with the preparatory commit
91aec93e6. But let's see what the buildfarm makes of it first.
Discussion: https://postgr.es/m/20171110185747.31519.28038@wrigleys.postgresql.org
Generalize section 1 to handle stuff that is principally about the
compiler (not libraries), such as attributes, and collect stuff there
that had been dropped into various other parts of c.h. Also, push
all the gettext macros into section 8, so that section 0 is really
just inclusions rather than inclusions and random other stuff.
The primary goal here is to get pg_attribute_aligned() defined before
section 3, so that we can use it with int128. But this seems like good
cleanup anyway.
This patch just moves macro definitions around, and shouldn't result
in any changes in generated code. But I'll push it out separately
to see if the buildfarm agrees.
Discussion: https://postgr.es/m/20171110185747.31519.28038@wrigleys.postgresql.org
Commit 5ecc0d738 removed the hard-wired superuser checks in lo_import
and lo_export in favor of protecting them with SQL permissions, but
failed to adjust the documentation to match. Fix that, and add a
<caution> paragraph pointing out the nontrivial security hazards
involved with actually granting such permissions. (It's still better
than ALLOW_DANGEROUS_LO_FUNCTIONS, though.)
Also, commit ae20b23a9 caused large object read/write privilege to
be checked during lo_open() rather than in the actual read or write
calls. Document that.
Discussion: https://postgr.es/m/CAB7nPqRHmNOYbETnc_2EjsuzSM00Z+BWKv9sy6tnvSd5gWT_JA@mail.gmail.com
Instead of passing large swaths of boolean arguments, define some flags
that can be used in a bitmask. This makes it easier not only to figure
out what each call site is doing, but also to add some new flags.
The flags are split in two -- one set for index_create directly and
another for constraints. index_create() itself receives both, and then
passes down the latter to index_constraint_create(), which can also be
called standalone.
Discussion: https://postgr.es/m/20171023151251.j75uoe27gajdjmlm@alvherre.pgsql
Reviewed-by: Simon Riggs
This feature caters to specialized use-cases such as running the normal
pgbench scenario with nonstandard indexes, or inserting other actions
between steps of the initialization sequence. The normal sequence of
initialization actions is broken down into half a dozen steps which can
be executed in a user-specified order, to the extent to which that's
sensible. The actions themselves aren't changed, except to make them
more robust against nonstandard uses:
* all four tables are now dropped in one DROP command, to reduce
assumptions about what foreign key relationships exist;
* all four tables are now truncated at the start of the data load
step, for consistency;
* the foreign key creation commands now specify constraint names, to
prevent accidentally creating duplicate constraints by executing the
'f' step twice.
Make some cosmetic adjustments in the messages emitted by pgbench
so that it's clear which steps are getting run, and so that the
messages agree with the documented names of the steps.
In passing, fix failure to enforce that the -v option is used only
in benchmarking mode.
Masahiko Sawada, reviewed by Fabien Coelho, editorialized a bit by me
Discussion: https://postgr.es/m/CAD21AoCsz0ZzfCFcxYZ+PUdpkDd5VsCSG0Pre_-K1EgokCDFYA@mail.gmail.com
Up until now, we only tracked the number of parameters, which was
sufficient to allocate an array of Datums of the appropriate size,
but not sufficient to, for example, know how to serialize a Datum
stored in one of those slots. An upcoming patch wants to do that,
so add this tracking to make it possible.
Patch by me, reviewed by Tom Lane and Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoYqpxDKn8koHdW8BEKk8FMUL0=e8m2Qe=M+r0UBjr3tuQ@mail.gmail.com
Apart from calling write_stderr() on failure, the handler depends on no
PostgreSQL facilities. We have experienced crashes before reaching the
former call site. Given such an early crash, this change cannot hurt
and may produce a helpful dump. Absent an early crash, this change has
no effect. Back-patch to 9.3 (all supported versions).
Takayuki Tsunakawa
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F80CD13@G01JPEXMBYT05
PostgreSQL running as a Windows service crashed upon calling
write_stderr() before MemoryContextInit(). This fix completes work
started in 5735efee15. Messages this
early contain only ASCII bytes; if we removed the CurrentMemoryContext
requirement, the ensuing conversions would have no effect. Back-patch
to 9.3 (all supported versions).
Takayuki Tsunakawa, reviewed by Michael Paquier.
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F80CC73@G01JPEXMBYT05
This suite had been a proper superset of the regular ecpg test suite,
but the three newest tests didn't reach it. To make this less likely to
recur, delete the extra schedule file and pass the TCP-specific test on
the command line. Back-patch to 9.3 (all supported versions).