Clauses in the lists retained by postgres_fdw during planning were
sometimes bare boolean clauses, sometimes RestrictInfos, and sometimes
a mixture of the two in the same list. The comment about that situation
didn't come close to telling the full truth, either. Aside from being
confusing, this had a couple of bad practical consequences:
* waste of planning cycles due to inability to cache per-clause selectivity
and cost estimates;
* sometimes, RestrictInfos would sneak into the fdw_private list of a
finished Plan node, causing failures if, for example, we tried to ship
the Plan tree to a parallel worker.
(It may well be that it's a bug in the parallel-query logic that we
would ever try to ship such a plan to a parallel worker, but in any
case this deserves to be cleaned up.)
To fix, rearrange so that clause lists in PgFdwRelationInfo are always
lists of RestrictInfos, and then strip the RestrictInfos at the last
minute when making a Plan node. In passing do a bit of refactoring and
comment cleanup in postgresGetForeignPlan and foreign_join_ok.
Although the messiness here dates back at least to 9.6, there's no evidence
that it causes anything worse than wasted planning cycles in 9.6, so no
back-patch for now.
Per fuzz testing by Andreas Seltenreich.
Tom Lane and Ashutosh Bapat
Discussion: https://postgr.es/m/87tw5x4vcu.fsf@credativ.de
This extends the castNode() notation introduced by commit 5bcab1114 to
provide, in one step, extraction of a list cell's pointer and coercion to
a concrete node type. For example, "lfirst_node(Foo, lc)" is the same
as "castNode(Foo, lfirst(lc))". Almost half of the uses of castNode
that have appeared so far include a list extraction call, so this is
pretty widely useful, and it saves a few more keystrokes compared to the
old way.
As with the previous patch, back-patch the addition of these macros to
pg_list.h, so that the notation will be available when back-patching.
Patch by me, after an idea of Andrew Gierth's.
Discussion: https://postgr.es/m/14197.1491841216@sss.pgh.pa.us
The new partitioned table capability added a new relkind, namely
RELKIND_PARTITIONED_TABLE. Update sepgsql to treat this new relkind
exactly the same way it does RELKIND_RELATION.
In addition, add regression test coverage for partitioned tables.
Issue raised by Stephen Frost and initial patch by Mike Palmiotto.
Review by Tom Lane and Robert Haas, and editorializing by me.
Discussion: https://postgr.es/m/flat/623bcaae-112e-ced0-8c22-a84f75ae0c53%40joeconway.com
If there can certainly be no more than one matching inner row for a given
outer row, then the executor can move on to the next outer row as soon as
it's found one match; there's no need to continue scanning the inner
relation for this outer row. This saves useless scanning in nestloop
and hash joins. In merge joins, it offers the opportunity to skip
mark/restore processing, because we know we have not advanced past the
first possible match for the next outer row.
Of course, the devil is in the details: the proof of uniqueness must
depend only on joinquals (not otherquals), and if we want to skip
mergejoin mark/restore then it must depend only on merge clauses.
To avoid adding more planning overhead than absolutely necessary,
the present patch errs in the conservative direction: there are cases
where inner_unique or skip_mark_restore processing could be used, but
it will not do so because it's not sure that the uniqueness proof
depended only on "safe" clauses. This could be improved later.
David Rowley, reviewed and rather heavily editorialized on by me
Discussion: https://postgr.es/m/CAApHDvqF6Sw-TK98bW48TdtFJ+3a7D2mFyZ7++=D-RyPsL76gw@mail.gmail.com
Instead of allocating memory in brin_deform_tuple and brin_copy_tuple
over and over during a scan, allow reuse of previously allocated memory.
This is said to make for a measurable performance improvement.
Author: Jinyu Zhang, Álvaro Herrera
Reviewed by: Tomas Vondra
Discussion: https://postgr.es/m/495deb78.4186.1500dacaa63.Coremail.beijing_pg@163.com
At -Og optimization gcc warns that variable tclass may be used
uninitialized when relkind == RELKIND_INDEX. Actually that can't
happen due to an early return, but quiet the compiler by initializing
tclass to 0.
In passing, use uint16_t consistently for the declaration of tclass.
Complaint and initial patch by Mike Palmiotto. Editorializing by me.
Probably not worth backpatching given that it is cosmetic, so apply
to development head only.
Discussion: https://postgr.es/m/flat/623bcaae-112e-ced0-8c22-a84f75ae0c53%40joeconway.com
<selinux/label.h> includes <stdbool.h>, which creates an incompatible
We don't care if <stdbool.h> redefines "true"/"false"; those are close
enough.
Complaint and initial patch by Mike Palmiotto. Final approach per
Tom Lane's suggestion, as discussed on hackers. Backpatching to
all supported branches.
Discussion: https://postgr.es/m/flat/623bcaae-112e-ced0-8c22-a84f75ae0c53%40joeconway.com
Follow on patch in the multi-variate statistics patch series.
CREATE STATISTICS s1 WITH (dependencies) ON (a, b) FROM t;
ANALYZE;
will collect dependency stats on (a, b) and then use the measured
dependency in subsequent query planning.
Commit 7b504eb282 added
CREATE STATISTICS with n-distinct coefficients. These are now
specified using the mutually exclusive option WITH (ndistinct).
Author: Tomas Vondra, David Rowley
Reviewed-by: Kyotaro HORIGUCHI, Álvaro Herrera, Dean Rasheed, Robert Haas
and many other comments and contributions
Discussion: https://postgr.es/m/56f40b20-c464-fad2-ff39-06b668fac47c@2ndquadrant.com
Make every page in a hash index which isn't all-zeroes have a valid
special space, so that tools like pageinspect don't error out.
Also, make pageinspect cope with all-zeroes pages, because
_hash_alloc_buckets can leave behind large numbers of those until
they're consumed by splits.
Ashutosh Sharma and Robert Haas, reviewed by Amit Kapila.
Original trouble report from Jeff Janes.
Discussion: http://postgr.es/m/CAMkU=1y6NjKmqbJ8wLMhr=F74WzcMALYWcVFhEpm7i=mV=XsOg@mail.gmail.com
Since hash indexes typically have very few overflow pages, adding a
new splitpoint essentially doubles the on-disk size of the index,
which can lead to large and abrupt increases in disk usage (and
perhaps long delays on occasion). To mitigate this problem to some
degree, divide larger splitpoints into four equal phases. This means
that, for example, instead of growing from 4GB to 8GB all at once, a
hash index will now grow from 4GB to 5GB to 6GB to 7GB to 8GB, which
is perhaps still not as smooth as we'd like but certainly an
improvement.
This changes the on-disk format of the metapage, so bump HASH_VERSION
from 2 to 3. This will force a REINDEX of all existing hash indexes,
but that's probably a good idea anyway. First, hash indexes from
pre-10 versions of PostgreSQL could easily be corrupted, and we don't
want to confuse corruption carried over from an older release with any
corruption caused despite the new write-ahead logging in v10. Second,
it will let us remove some backward-compatibility code added by commit
293e24e507.
Mithun Cy, reviewed by Amit Kapila, Jesper Pedersen and me. Regression
test outputs updated by me.
Discussion: http://postgr.es/m/CAD__OuhG6F1gQLCgMQNnMNgoCvOLQZz9zKYJQNYvYmmJoM42gA@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoYty0jCf-pa+m+vYUJ716+AxM7nv_syvyanyf5O-L_i2A@mail.gmail.com
Currently, the only type of child relation is an "other member rel",
which is the child of a baserel, but in the future joins and even
upper relations may have child rels. To facilitate that, introduce
macros that test to test for particular RelOptKind values, and use
them in various places where they help to clarify the sense of a test.
(For example, a test may allow RELOPT_OTHER_MEMBER_REL either because
it intends to allow child rels, or because it intends to allow simple
rels.)
Also, remove find_childrel_top_parent, which will not work for a
child rel that is not a baserel. Instead, add a new RelOptInfo
member top_parent_relids to track the same kind of information in a
more generic manner.
Ashutosh Bapat, slightly tweaked by me. Review and testing of the
patch set from which this was taken by Rajkumar Raghuwanshi and Rafia
Sabih.
Discussion: http://postgr.es/m/CA+TgmoagTnF2yqR3PT2rv=om=wJiZ4-A+ATwdnriTGku1CLYxA@mail.gmail.com
A QueryEnvironment concept is added, which allows new types of
objects to be passed into queries from parsing on through
execution. At this point, the only thing implemented is a
collection of EphemeralNamedRelation objects -- relations which
can be referenced by name in queries, but do not exist in the
catalogs. The only type of ENR implemented is NamedTuplestore, but
provision is made to add more types fairly easily.
An ENR can carry its own TupleDesc or reference a relation in the
catalogs by relid.
Although these features can be used without SPI, convenience
functions are added to SPI so that ENRs can easily be used by code
run through SPI.
The initial use of all this is going to be transition tables in
AFTER triggers, but that will be added to each PL as a separate
commit.
An incidental effect of this patch is to produce a more informative
error message if an attempt is made to modify the contents of a CTE
from a referencing DML statement. No tests previously covered that
possibility, so one is added.
Kevin Grittner and Thomas Munro
Reviewed by Heikki Linnakangas, David Fetter, and Thomas Munro
with valuable comments and suggestions from many others
Don't import partitions. Do import partitioned tables which are
not themselves partitions.
Report by Stephen Frost. Design and patch by Michael Paquier,
reviewed by Amit Langote. Documentation revised by me.
Discussion: http://postgr.es/m/20170309141531.GD9812@tamriel.snowman.net
Three nologin roles with non-overlapping privs are created by default
* pg_read_all_settings - read all GUCs.
* pg_read_all_stats - pg_stat_*, pg_database_size(), pg_tablespace_size()
* pg_stat_scan_tables - may lock/scan tables
Top level role - pg_monitor includes all of the above by default, plus others
Author: Dave Page
Reviewed-by: Stephen Frost, Robert Haas, Peter Eisentraut, Simon Riggs
The V0 convention is failure prone because we've so far assumed that a
function is V0 if PG_FUNCTION_INFO_V1 is missing, leading to crashes
if a function was coded against the V1 interface. V0 doesn't allow
proper NULL, SRF and toast handling. V0 doesn't offer features that
V1 doesn't.
Thus remove V0 support and obsolete fmgr README contents relating to
it.
Author: Andres Freund, with contributions by Peter Eisentraut & Craig Ringer
Reviewed-By: Peter Eisentraut, Craig Ringer
Discussion: https://postgr.es/m/20161208213441.k3mbno4twhg2qf7g@alap3.anarazel.de
There are no functional changes here; this simply encapsulates knowledge
of the ItemPointerData struct so that a future patch can change things
without more breakage.
All direct users of ip_blkid and ip_posid are changed to use existing
macros ItemPointerGetBlockNumber and ItemPointerGetOffsetNumber
respectively. For callers where that's inappropriate (because they
Assert that the itempointer is is valid-looking), add
ItemPointerGetBlockNumberNoCheck and ItemPointerGetOffsetNumberNoCheck,
which lack the assertion but are otherwise identical.
Author: Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdNnFon4cJiL=h1mZH3bgUeU+sWHuU4Yr8AB=j3A2p1GiA@mail.gmail.com
The conname variable was not initialized in some code paths, resulting
in error reports referring to the "unnamed" connection rather than the
correct connection name.
Author: Rushabh Lathia <rushabh.lathia@gmail.com>
The trouble with the original choice here is that "?" is a valid (and
indeed used) operator name, so that you could end up with ambiguous
statement texts like "SELECT ? ? ?". With this patch, you instead
see "SELECT $1 ? $2", which seems significantly more readable.
The numbers used for this purpose begin after the last actual $N parameter
in the particular query. The conflict with external parameters has its own
potential for confusion of course, but it was agreed to be an improvement
over the previous behavior.
Lukas Fittl
Discussion: https://postgr.es/m/CAP53PkxeaCuwYmF-A4J5z2-qk5fYFo5_NH3gpXGJJBxv1DMwEw@mail.gmail.com
Fix all perlcritic warnings of severity level 5, except in
src/backend/utils/Gen_dummy_probes.pl, which is automatically generated.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
This extends the Aggregate node with two new features: HashAggregate
can now run multiple hashtables concurrently, and a new strategy
MixedAggregate populates hashtables while doing sorted grouping.
The planner will now attempt to save as many sorts as possible when
planning grouping sets queries, while not exceeding work_mem for the
estimated combined sizes of all hashtables used. No SQL-level changes
are required. There should be no user-visible impact other than the
new EXPLAIN output and possible changes to result ordering when ORDER
BY was not used (which affected a few regression tests). The
enable_hashagg option is respected.
Author: Andrew Gierth
Reviewers: Mark Dilger, Andres Freund
Discussion: https://postgr.es/m/87vatszyhj.fsf@news-spur.riddles.org.uk
This replaces the old, recursive tree-walk based evaluation, with
non-recursive, opcode dispatch based, expression evaluation.
Projection is now implemented as part of expression evaluation.
This both leads to significant performance improvements, and makes
future just-in-time compilation of expressions easier.
The speed gains primarily come from:
- non-recursive implementation reduces stack usage / overhead
- simple sub-expressions are implemented with a single jump, without
function calls
- sharing some state between different sub-expressions
- reduced amount of indirect/hard to predict memory accesses by laying
out operation metadata sequentially; including the avoidance of
nearly all of the previously used linked lists
- more code has been moved to expression initialization, avoiding
constant re-checks at evaluation time
Future just-in-time compilation (JIT) has become easier, as
demonstrated by released patches intended to be merged in a later
release, for primarily two reasons: Firstly, due to a stricter split
between expression initialization and evaluation, less code has to be
handled by the JIT. Secondly, due to the non-recursive nature of the
generated "instructions", less performance-critical code-paths can
easily be shared between interpreted and compiled evaluation.
The new framework allows for significant future optimizations. E.g.:
- basic infrastructure for to later reduce the per executor-startup
overhead of expression evaluation, by caching state in prepared
statements. That'd be helpful in OLTPish scenarios where
initialization overhead is measurable.
- optimizing the generated "code". A number of proposals for potential
work has already been made.
- optimizing the interpreter. Similarly a number of proposals have
been made here too.
The move of logic into the expression initialization step leads to some
backward-incompatible changes:
- Function permission checks are now done during expression
initialization, whereas previously they were done during
execution. In edge cases this can lead to errors being raised that
previously wouldn't have been, e.g. a NULL array being coerced to a
different array type previously didn't perform checks.
- The set of domain constraints to be checked, is now evaluated once
during expression initialization, previously it was re-built
every time a domain check was evaluated. For normal queries this
doesn't change much, but e.g. for plpgsql functions, which caches
ExprStates, the old set could stick around longer. The behavior
around might still change.
Author: Andres Freund, with significant changes by Tom Lane,
changes by Heikki Linnakangas
Reviewed-By: Tom Lane, Heikki Linnakangas
Discussion: https://postgr.es/m/20161206034955.bh33paeralxbtluv@alap3.anarazel.de
Previously, it was unsafe to execute a plan in parallel if
ExecutorRun() might be called with a non-zero row count. However,
it's quite easy to fix things up so that we can support that case,
provided that it is known that we will never call ExecutorRun() a
second time for the same QueryDesc. Add infrastructure to signal
this, and cross-checks to make sure that a caller who claims this is
true doesn't later reneg.
While that pattern never happens with queries received directly from a
client -- there's no way to know whether multiple Execute messages
will be sent unless the first one requests all the rows -- it's pretty
common for queries originating from procedural languages, which often
limit the result to a single tuple or to a user-specified number of
tuples.
This commit doesn't actually enable parallelism in any additional
cases, because currently none of the places that would be able to
benefit from this infrastructure pass CURSOR_OPT_PARALLEL_OK in the
first place, but it makes it much more palatable to pass
CURSOR_OPT_PARALLEL_OK in places where we currently don't, because it
eliminates some cases where we'd end up having to run the parallel
plan serially.
Patch by me, based on some ideas from Rafia Sabih and corrected by
Rafia Sabih based on feedback from Dilip Kumar and myself.
Discussion: http://postgr.es/m/CA+TgmobXEhvHbJtWDuPZM9bVSLiTj-kShxQJ2uM5GPDze9fRYA@mail.gmail.com
Add functionality for a new subscription to copy the initial data in the
tables and then sync with the ongoing apply process.
For the copying, add a new internal COPY option to have the COPY source
data provided by a callback function. The initial data copy works on
the subscriber by receiving COPY data from the publisher and then
providing it locally into a COPY that writes to the destination table.
A WAL receiver can now execute full SQL commands. This is used here to
obtain information about tables and publications.
Several new options were added to CREATE and ALTER SUBSCRIPTION to
control whether and when initial table syncing happens.
Change pg_dump option --no-create-subscription-slots to
--no-subscription-connect and use the new CREATE SUBSCRIPTION
... NOCONNECT option for that.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Tested-by: Erik Rijkers <er@xs4all.nl>
This will allow enums to be used in exclusion constraints.
The code uses the new CallerFInfoFunctionCall infrastructure in fmgr,
and the support for it added to btree_gist in commit 393bb504d7.
Reviewed by Tom Lane and Anastasia Lubennikova
Discussion: http://postgr.es/m/56EA8A71.8060107@dunslane.net
None of the existing types actually need to use this mechanism, but this
will allow support for enum types which will need it. A separate patch
will adjust the varlena types support for consistency.
Reviewed by Tom Lane and Anastasia Lubennikova
Discussion: http://postgr.es/m/27220.1478360811@sss.pgh.pa.us
The previous deparsing logic wasn't smart enough to produce subqueries
when deparsing; make it smart enough to do that. However, we only do
it that way when necessary, because it generates more complicated SQL
which will be harder for any humans reading the queries to understand.
Etsuro Fujita, reviewed by Ashutosh Bapat
Discussion: http://postgr.es/m/c449261a-b033-dc02-9254-2fe5b7044795@lab.ntt.co.jp
This adds in support for EUI-64 MAC addresses by adding a new data type
called 'macaddr8' (using our usual convention of indicating the number
of bytes stored).
This was largely a copy-and-paste from the macaddr data type, with
appropriate adjustments for having 8 bytes instead of 6 and adding
support for converting a provided EUI-48 (6 byte format) to the EUI-64
format. Conversion from EUI-48 to EUI-64 inserts FFFE as the 4th and
5th bytes but does not perform the IPv6 modified EUI-64 action of
flipping the 7th bit, but we add a function to perform that specific
action for the user as it may be commonly done by users who wish to
calculate their IPv6 address based on their network prefix and 48-bit
MAC address.
Author: Haribabu Kommi, with a good bit of rework of macaddr8_in by me.
Reviewed by: Vitaly Burovoy, Kuntal Ghosh
Discussion: https://postgr.es/m/CAJrrPGcUi8ZH+KkK+=TctNQ+EfkeCEHtMU_yo1mvX8hsk_ghNQ@mail.gmail.com
Previously if a directory had both isolationtester and plain
regression tests, they couldn't be run in parallel, because they'd
access the same files/directories. That, so far, only affected
contrib/test_decoding.
Rather than fix that locally in contrib/test_decoding, improve
pg_regress_isolation_[install]check to use separate resources from
plain regression tests.
That requires a minor change in pg_regress, namely that the
--outputdir is created if not already existing, that seems like good
idea anyway.
Use the improved helpers even where previously not used.
Author: Tom Lane and Andres Freund
Discussion: https://postgr.es/m/20170311194831.vm5ikpczq52c2drg@alap3.anarazel.de
The previous coding of the test was vulnerable against autovacuum
triggering work on one of the tables in check_btree.sql.
For the purpose of the test it's entirely sufficient to check for
locks taken by the current process, so add an appropriate restriction.
While touching the test, expand it to also check for locks on the
underlying relations, rather than just the indexes.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/30354.1489434301@sss.pgh.pa.us
The warning about hash indexes not being write-ahead logged and their
use being discouraged has been removed. "snapshot too old" is now
supported for tables with hash indexes. Most importantly, barring
bugs, hash indexes will now be crash-safe and usable on standbys.
This commit doesn't yet add WAL consistency checking for hash
indexes, as we now have for other index types; a separate patch has
been submitted to cure that lack.
Amit Kapila, reviewed and slightly modified by me. The larger patch
series of which this is a part has been reviewed and tested by Álvaro
Herrera, Ashutosh Sharma, Mark Kirkwood, Jeff Janes, and Jesper
Pedersen.
Discussion: http://postgr.es/m/CAA4eK1JOBX=YU33631Qh-XivYXtPSALh514+jR8XeD7v+K3r_Q@mail.gmail.com
This makes almost all core code follow the policy introduced in the
previous commit. Specific decisions:
- Text search support functions with char* and length arguments, such as
prsstart and lexize, may receive unaligned strings. I doubt
maintainers of non-core text search code will notice.
- Use plain VARDATA() on values detoasted or synthesized earlier in the
same function. Use VARDATA_ANY() on varlenas sourced outside the
function, even if they happen to always have four-byte headers. As an
exception, retain the universal practice of using VARDATA() on return
values of SendFunctionCall().
- Retain PG_GETARG_BYTEA_P() in pageinspect. (Page images are too large
for a one-byte header, so this misses no optimization.) Sites that do
not call get_page_from_raw() typically need the four-byte alignment.
- For now, do not change btree_gist. Its use of four-byte headers in
memory is partly entangled with storage of 4-byte headers inside
GBT_VARKEY, on disk.
- For now, do not change gtrgm_consistent() or gtrgm_distance(). They
incorporate the varlena header into a cache, and there are multiple
credible implementation strategies to consider.
Detect fclose() failures; given "ln -s /dev/full $PGDATA/devfull",
"pg_file_write('devfull', 'x', true)" now fails as it should. Don't
leak a stream when fwrite() fails. Remove a born-ineffective test that
aimed to skip zero-length writes. Back-patch to 9.2 (all supported
versions).
In functions that issue a deconstruct_array() call, consistently use
plain VARSIZE()/VARDATA() on the array elements. Prior practice was
divided between those and VARSIZE_ANY_EXHDR()/VARDATA_ANY().
Although it's reasonable to expect that most of these constants will
never change, that does not make it good programming style to hard-code
the value rather than using the RELKIND_FOO macros.
I think I've now gotten all the hard-coded references in C code.
Unfortunately there's no equally convenient way to parameterize
SQL files ...
Discussion: https://postgr.es/m/11145.1488931324@sss.pgh.pa.us
This is the beginning of a collection of SQL-callable functions to
verify the integrity of data files. For now it only contains code to
verify B-Tree indexes.
This adds two SQL-callable functions, validating B-Tree consistency to
a varying degree. Check the, extensive, docs for details.
The goal is to later extend the coverage of the module to further
access methods, possibly including the heap. Once checks for
additional access methods exist, we'll likely add some "dispatch"
functions that cover multiple access methods.
Author: Peter Geoghegan, editorialized by Andres Freund
Reviewed-By: Andres Freund, Tomas Vondra, Thomas Munro,
Anastasia Lubennikova, Robert Haas, Amit Langote
Discussion: CAM3SWZQzLMhMwmBqjzK+pRKXrNUZ4w90wYMUWfkeV8mZ3Debvw@mail.gmail.com
The contrib extensions pageinspect, pg_visibility and pgstattuple only
work against regular relations which have storage. They don't work
against foreign tables, partitioned (parent) tables, views, et al.
Add checks to the user-callable functions to return a useful error
message to the user if they mistakenly pass an invalid relation to a
function which doesn't accept that kind of relation.
In passing, improve some of the existing checks to use ereport() instead
of elog(), add a function to consolidate common checks where
appropriate, and add some regression tests.
Author: Amit Langote, with various changes by me
Reviewed by: Michael Paquier and Corey Huinker
Discussion: https://postgr.es/m/ab91fd9d-4751-ee77-c87b-4dd704c1e59c@lab.ntt.co.jp
XMLTABLE is defined by the SQL/XML standard as a feature that allows
turning XML-formatted data into relational form, so that it can be used
as a <table primary> in the FROM clause of a query.
This new construct provides significant simplicity and performance
benefit for XML data processing; what in a client-side custom
implementation was reported to take 20 minutes can be executed in 400ms
using XMLTABLE. (The same functionality was said to take 10 seconds
using nested PostgreSQL XPath function calls, and 5 seconds using
XMLReader under PL/Python).
The implemented syntax deviates slightly from what the standard
requires. First, the standard indicates that the PASSING clause is
optional and that multiple XML input documents may be given to it; we
make it mandatory and accept a single document only. Second, we don't
currently support a default namespace to be specified.
This implementation relies on a new executor node based on a hardcoded
method table. (Because the grammar is fixed, there is no extensibility
in the current approach; further constructs can be implemented on top of
this such as JSON_TABLE, but they require changes to core code.)
Author: Pavel Stehule, Álvaro Herrera
Extensively reviewed by: Craig Ringer
Discussion: https://postgr.es/m/CAFj8pRAgfzMD-LoSmnMGybD0WsEznLHWap8DO79+-GTRAPR4qA@mail.gmail.com
This introduces a new generic SASL authentication method, similar to the
GSS and SSPI methods. The server first tells the client which SASL
authentication mechanism to use, and then the mechanism-specific SASL
messages are exchanged in AuthenticationSASLcontinue and PasswordMessage
messages. Only SCRAM-SHA-256 is supported at the moment, but this allows
adding more SASL mechanisms in the future, without changing the overall
protocol.
Support for channel binding, aka SCRAM-SHA-256-PLUS is left for later.
The SASLPrep algorithm, for pre-processing the password, is not yet
implemented. That could cause trouble, if you use a password with
non-ASCII characters, and a client library that does implement SASLprep.
That will hopefully be added later.
Authorization identities, as specified in the SCRAM-SHA-256 specification,
are ignored. SET SESSION AUTHORIZATION provides more or less the same
functionality, anyway.
If a user doesn't exist, perform a "mock" authentication, by constructing
an authentic-looking challenge on the fly. The challenge is derived from
a new system-wide random value, "mock authentication nonce", which is
created at initdb, and stored in the control file. We go through these
motions, in order to not give away the information on whether the user
exists, to unauthenticated users.
Bumps PG_CONTROL_VERSION, because of the new field in control file.
Patch by Michael Paquier and Heikki Linnakangas, reviewed at different
stages by Robert Haas, Stephen Frost, David Steele, Aleksander Alekseev,
and many others.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRbR3GmFYdedCAhzukfKrgBLTLtMvENOmPrVWREsZkF8g%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqSMXU35g%3DW9X74HVeQp0uvgJxvYOuA4A-A3M%2B0wfEBv-w%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/55192AFE.6080106@iki.fi
This way both frontend and backends can use them. The functions are taken
from pgcrypto, which now fetches the source files it needs from
src/common/.
A new interface is designed for the SHA2 functions, which allow linking
to either OpenSSL or the in-core stuff taken from KAME as needed.
Michael Paquier, reviewed by Robert Haas.
Discussion: https://www.postgresql.org/message-id/CAB7nPqTGKuTM5jiZriHrNaQeVqp5e_iT3X4BFLWY_HyHxLvySQ%40mail.gmail.com
PQerrorMessage() returns an error message with a trailing newline, but
in backend use (dblink, postgres_fdw, libpqwalreceiver), we want to have
the error message without that for emitting via ereport(). To simplify
that, add a function pchomp() that returns a pstrdup'ed string with the
trailing newline characters removed.
c.h #includes a number of core libc header files, such as <stdio.h>.
There's no point in re-including these after having read postgres.h,
postgres_fe.h, or c.h; so remove code that did so.
While at it, also fix some places that were ignoring our standard pattern
of "include postgres[_fe].h, then system header files, then other Postgres
header files". While there's not any great magic in doing it that way
rather than system headers last, it's silly to have just a few files
deviating from the general pattern. (But I didn't attempt to enforce this
globally, only in files I was touching anyway.)
I'd be the first to say that this is mostly compulsive neatnik-ism,
but over time it might save enough compile cycles to be useful.
Twiddle the replication-related code so that its timestamp variables
are declared TimestampTz, rather than the uninformative "int64" that
was previously used for meant-to-be-always-integer timestamps.
This resolves the int64-vs-TimestampTz declaration inconsistencies
introduced by commit 7c030783a, though in the opposite direction to
what was originally suggested.
This required including datatype/timestamp.h in a couple more places
than before. I decided it would be a good idea to slim down that
header by not having it pull in <float.h> etc, as those headers are
no longer at all relevant to its purpose. Unsurprisingly, a small number
of .c files turn out to have been depending on those inclusions, so add
them back in the .c files as needed.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
Discussion: https://postgr.es/m/27694.1487456324@sss.pgh.pa.us
The logic for removing excess trigrams from the result was faulty.
It intends to avoid merging the initial and final states of the NFA,
which is necessary, but in testing whether removal of a specific trigram
would cause that, it failed to consider the combined effects of all the
state merges that that trigram's removal would cause. This could result
in a broken final graph that would never match anything, leading to GIN
or GiST indexscans not finding anything.
To fix, add a "tentParent" field that is used only within this loop,
and set it to show state merges that we are tentatively going to do.
While examining a particular arc, we must chase up through tentParent
links as well as regular parent links (the former can only appear atop
the latter), and we must account for state init/fin flag merges that
haven't actually been done yet.
To simplify the latter, combine the separate init and fin bool fields
into a bitmap flags field. I also chose to get rid of the "children"
state list, which seems entirely inessential.
Per bug #14563 from Alexey Isayko, which the added test cases are based on.
Back-patch to 9.3 where this code was added.
Report: https://postgr.es/m/20170222111446.1256.67547@wrigleys.postgresql.org
Discussion: https://postgr.es/m/8816.1487787594@sss.pgh.pa.us
There is no specific reason for this right now, but keeping support for
old Python versions around indefinitely increases the maintenance
burden. The oldest supported Python version is now Python 2.4, which is
still shipped in RHEL/CentOS 5 by default.
In configure, add a check for the required Python version and give a
friendly error message for an old version, instead of relying on an
obscure build error later on.
In combination with 569174f1be, which
taught the btree AM how to perform parallel index scans, this allows
parallel index scan plans on btree indexes. This infrastructure
should be general enough to support parallel index scans for other
index AMs as well, if someone updates them to support parallel
scans.
Amit Kapila, reviewed and tested by Anastasia Lubennikova, Tushar
Ahuja, and Haribabu Kommi, and me.
This module was intended to ease migrations of applications that used
the pre-8.3 version of text search to the in-core version introduced
in that release. However, since all pre-8.3 releases of the database
have been out of support for more than 5 years at this point, we
expect that few people are depending on it at this point. If some
people still need it, nothing prevents it from being maintained as a
separate extension, outside of core.
Discussion: http://postgr.es/m/CA+Tgmob5R8aDHiFRTQsSJbT1oreKg2FOSBrC=2f4tqEH3dOMAg@mail.gmail.com
Commit f82ec32ac3 renamed the pg_xlog
directory to pg_wal. To make things consistent, and because "xlog" is
terrible terminology for either "transaction log" or "write-ahead log"
rename all SQL-callable functions that contain "xlog" in the name to
instead contain "wal". (Note that this may pose an upgrade hazard for
some users.)
Similarly, rename the xlog_position argument of the functions that
create slots to be called wal_position.
Discussion: https://www.postgresql.org/message-id/CA+Tgmob=YmA=H3DbW1YuOXnFVgBheRmyDkWcD9M8f=5bGWYEoQ@mail.gmail.com
It did that to verify that the page was an overflow page rather than
anything else, but that means that checking the status of all the
overflow bits requires reading the entire index. So don't do that.
The new code validates that the page is not a primary bucket page
or bitmap page by looking at the metapage, so that using this on
large numbers of pages can be reasonably efficient.
Ashutosh Sharma, per a complaint from me, and with further
modifications by me.
It's always been possible for index AMs to cache data across successive
amgettuple calls within a single SQL command: the IndexScanDesc.opaque
field is meant for precisely that. However, no comparable facility
exists for amortizing setup work across successive aminsert calls.
This patch adds such a feature and teaches GIN, GIST, and BRIN to use it
to amortize catalog lookups they'd previously been doing on every call.
(The other standard index AMs keep everything they need in the relcache,
so there's little to improve there.)
For GIN, the overall improvement in a statement that inserts many rows
can be as much as 10%, though it seems a bit less for the other two.
In addition, this makes a really significant difference in runtime
for CLOBBER_CACHE_ALWAYS tests, since in those builds the repeated
catalog lookups are vastly more expensive.
The reason this has been hard up to now is that the aminsert function is
not passed any useful place to cache per-statement data. What I chose to
do is to add suitable fields to struct IndexInfo and pass that to aminsert.
That's not widening the index AM API very much because IndexInfo is already
within the ken of ambuild; in fact, by passing the same info to aminsert
as to ambuild, this is really removing an inconsistency in the AM API.
Discussion: https://postgr.es/m/27568.1486508680@sss.pgh.pa.us
This avoids a very significant amount of buffer manager traffic and
contention when scanning hash indexes, because it's no longer
necessary to lock and pin the metapage for every scan. We do need
some way of figuring out when the cache is too stale to use any more,
so that when we lock the primary bucket page to which the cached
metapage points us, we can tell whether a split has occurred since we
cached the metapage data. To do that, we use the hash_prevblkno field
in the primary bucket page, which would otherwise always be set to
InvalidBuffer.
This patch contains code so that it will continue working (although
less efficiently) with hash indexes built before this change, but
perhaps we should consider bumping the hash version and ripping out
the compatibility code. That decision can be made later, though.
Mithun Cy, reviewed by Jesper Pedersen, Amit Kapila, and by me.
Before committing, I made a number of cosmetic changes to the last
posted version of the patch, adjusted _hash_getcachedmetap to be more
careful about order of operation, and made some necessary updates to
the pageinspect documentation and regression tests.
Uniformly expose unsigned quantities using the next-wider signed
integer type (since we have no unsigned types at the SQL level).
At the SQL level, this results a change to report itemoffset as
int4 rather than int2. Also at the SQL level, report one value
that is an OID as type oid. Under the hood, uniformly use macros
that match the SQL output type as to both width and signedness.
Since pgstattuple v1.5 hasn't been released yet, no need for a new
extension version. The new function exposes statistics about hash
indexes similar to what other pgstatindex functions return for other
index types.
Ashutosh Sharma, reviewed by Kuntal Ghosh. Substantial further
revisions by me.
On machines with MAXALIGN = 8, the payload of a bytea is not maxaligned,
since it will start 4 bytes into a palloc'd value. On alignment-picky
hardware, this will cause failures in accesses to 8-byte-wide values
within the page. We already encountered this problem when we introduced
GIN index inspection functions, and fixed it in commit 84ad68d64. Make
use of the same function for hash indexes.
A small difficulty is that up to now contrib/pageinspect has not shared
any functions at all across files. To support that, introduce a common
header file "pageinspect.h" for the module.
Also, move get_page_from_raw() out of ginfuncs.c, where it didn't
especially belong, and put it in rawpage.c which seems a more natural home.
Per buildfarm.
Discussion: https://postgr.es/m/17311.1486134714@sss.pgh.pa.us
Per a report from Tom Lane, the ffactor reported by hash_metapage_info
and the free_size reported by hash_page_stats vary by platform.
Ashutosh Sharma and Robert Haas
It seems like somebody used a dartboard while choosing integer widths
for the various values taken and returned by these functions ... and
then threw a fresh set of darts while writing the SQL declarations.
This patch brings the C code into line with what the SQL declarations
say, which is enough to make it not dump core on the particular 32-bit
machine I'm testing on. But I think we could do with another round
of looking at what the datum widths *should* be. For instance, it's
not all that sensible that hash_bitmap_info decided to use int64 to
represent a BlockNumber input when get_raw_page doesn't do it that way.
There's also a remaining problem that the expected outputs from the
test script are platform-dependent, but I'll leave that issue for
somebody else.
Per buildfarm.
Commit 08bf6e5295 seems not to have
used the correct *GetDatum and PG_GETARG_* macros for the SQL types
in some cases, and some of the SQL types seem to have been poorly
chosen, too. Try to fix it. I'm not sure if this is the reason
why the buildfarm is currently unhappy with this code, but it
seems like a good place to start.
Buildfarm unhappiness reported by Tom Lane.
Patch by Jesper Pedersen and Ashutosh Sharma, with some error handling
improvements by me. Tests from Peter Eisentraut. Reviewed by Álvaro
Herrera, Michael Paquier, Jesper Pedersen, Jeff Janes, Peter
Eisentraut, Amit Kapila, Mithun Cy, and me.
Discussion: http://postgr.es/m/e2ac6c58-b93f-9dd9-f4e6-d6d30add7fdf@redhat.com
Remove $(pkglibdir) from $(rpathdir), since commits
d51924be88 and
eda04886c1 removed direct linkage to
objects stored there. Users are unlikely to notice the difference.
Accompany every $(python_libspec) with $(python_additional_libs); this
doesn't fix a demonstrated bug, but it might do so on rare Python
configurations. With these changes, AIX ceases to be a special case.
The rule is that if pg_authid.rolpassword begins with "md5" and has the
right length, it's an MD5 hash, otherwise it's a plaintext password. The
idiom has been to use isMD5() to check for that, but that gets awkward,
when we add new kinds of verifiers, like the verifiers for SCRAM
authentication in the pending SCRAM patch set. Replace isMD5() with a new
get_password_type() function, so that when new verifier types are added, we
don't need to remember to modify every place that currently calls isMD5(),
to also recognize the new kinds of verifiers.
Also, use the new plain_crypt_verify function in passwordcheck, so that it
doesn't need to know about MD5, or in the future, about other kinds of
hashes or password verifiers.
Reviewed by Michael Paquier and Peter Eisentraut.
Discussion: https://www.postgresql.org/message-id/2d07165c-1793-e243-a2a9-e45b624c7580@iki.fi
Commit 7012b132d added some tests that consumed an excessive amount of
time, more than tripling the time needed for "make installcheck" for this
module. Add filter conditions to reduce the number of rows scanned,
bringing the runtime down to within hailing distance of what it was before.
Jeevan Chalke and Ashutosh Bapat, per a gripe from me
Discussion: https://postgr.es/m/16565.1478104765@sss.pgh.pa.us
This patch doesn't actually make any index AM parallel-aware, but it
provides the necessary functions at the AM layer to do so.
Rahila Syed, Amit Kapila, Robert Haas
Since 69f4b9c plain expression evaluation (and thus normal projection)
can't return sets of tuples anymore. Thus remove code dealing with
that possibility.
This will require adjustments in external code using
ExecEvalExpr()/ExecProject() - that should neither be hard nor very
common.
Author: Andres Freund and Tom Lane
Discussion: https://postgr.es/m/20160822214023.aaxz5l4igypowyri@alap3.anarazel.de
This avoids additional translatable strings for each distinct type, as
well as making our quoting style around type names more consistent
(namely, that we don't quote type names). This continues what started
as f402b99501.
Discussion: https://postgr.es/m/20160401170642.GA57509@alvherre.pgsql
Gen_fmgrtab.pl creates a new file fmgrprotos.h, which contains
prototypes for all functions registered in pg_proc.h. This avoids
having to manually maintain these prototypes across a random variety of
header files. It also automatically enforces a correct function
signature, and since there are warnings about missing prototypes, it
will detect functions that are defined but not registered in
pg_proc.h (or otherwise used).
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>