The set of scripts in charge of running the regression tests for MSVC
run currently under the assumption that only $(top_builddir) can used in
option values defined in REGRESS_OPTS, and those options need to have a
specific format as well to be correctly parsed, so fix the Makefile
values so as those are correctly set.
Per complains from buildfarm member dory and whelk, with some extra
testing done on my side with MSVC to check this patch.
The following options are added for extensions:
- TAP_TESTS, to allow an extention to run TAP tests which are the ones
present in t/*.pl. A subset of tests can always be run with the
existing PROVE_TESTS for developers.
- ISOLATION, to define a list of isolation tests.
- ISOLATION_OPTS, to pass custom options to isolation_tester.
A couple of custom Makefile targets have been accumulated across the
tree to cover the lack of facility in PGXS for a couple of releases when
using those test suites, which are all now replaced with the new flags,
without reducing the test coverage. This also fixes an issue with
contrib/bloom/, which had a custom target to trigger its TAP tests of
its own not part of the main check runs.
Author: Michael Paquier
Reviewed-by: Adam Berlin, Álvaro Herrera, Tom Lane, Nikolay Shaplov,
Arthur Zakirov
Discussion: https://postgr.es/m/20180906014849.GG2726@paquier.xyz
Two closely related bugs are fixed. First, xmin of logical slots was
advanced too early. During xl_running_xacts processing, xmin of the
slot was set to the oldest running xid in the record, but that's wrong:
actually, snapshots which will be used for not-yet-replayed transactions
might consider older txns as running too, so we need to keep xmin back
for them. The problem wasn't noticed earlier because DDL which allows
to delete tuple (set xmax) while some another not-yet-committed
transaction looks at it is pretty rare, if not unique: e.g. all forms of
ALTER TABLE which change schema acquire ACCESS EXCLUSIVE lock
conflicting with any inserts. The included test case (test_decoding's
oldest_xmin) uses ALTER of a composite type, which doesn't have such
interlocking.
To deal with this, we must be able to quickly retrieve oldest xmin
(oldest running xid among all assigned snapshots) from ReorderBuffer. To
fix, add another list of ReorderBufferTXNs to the reorderbuffer, where
transactions are sorted by base-snapshot-LSN. This is slightly
different from the existing (sorted by first-LSN) list, because a
transaction can have an earlier LSN but a later Xmin, if its first
record does not obtain an xmin (eg. xl_xact_assignment). Note this new
list doesn't fully replace the existing txn list: we still need that one
to prevent WAL recycling.
The second issue concerns SnapBuilder snapshots and subtransactions.
SnapBuildDistributeNewCatalogSnapshot never assigned a snapshot to a
transaction that is known to be a subtxn, which is good in the common
case that the top-level transaction already has one (no point in doing
so), but a bug otherwise. To fix, arrange to transfer the snapshot from
the subtxn to its top-level txn as soon as the kinship gets known.
test_decoding's snapshot_transfer verifies this.
Also, fix a minor memory leak: refcount of toplevel's old base snapshot
was not decremented when the snapshot is transferred from child.
Liberally sprinkle code comments, and rewrite a few existing ones. This
part is my (Álvaro's) contribution to this commit, as I had to write all
those comments in order to understand the existing code and Arseny's
patch.
Reported-by: Arseny Sher <a.sher@postgrespro.ru>
Diagnosed-by: Arseny Sher <a.sher@postgrespro.ru>
Co-authored-by: Arseny Sher <a.sher@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://postgr.es/m/87lgdyz1wj.fsf@ars-thinkpad
Add a new WAL record type for TRUNCATE, which is only used when
wal_level >= logical. (For physical replication, TRUNCATE is already
replicated via SMGR records.) Add new callback for logical decoding
output plugins to receive TRUNCATE actions.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Previously if a directory had both isolationtester and plain
regression tests, they couldn't be run in parallel, because they'd
access the same files/directories. That, so far, only affected
contrib/test_decoding.
Rather than fix that locally in contrib/test_decoding, improve
pg_regress_isolation_[install]check to use separate resources from
plain regression tests.
That requires a minor change in pg_regress, namely that the
--outputdir is created if not already existing, that seems like good
idea anyway.
Use the improved helpers even where previously not used.
Author: Tom Lane and Andres Freund
Discussion: https://postgr.es/m/20170311194831.vm5ikpczq52c2drg@alap3.anarazel.de
This allows creating temporary replication slots that are removed
automatically at the end of the session or on error.
From: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Before initializing iteration over a subtransaction's changes, the last
few changes were not spilled to disk. That's correct if the transaction
didn't spill to disk, but otherwise... This bug can lead to missed or
misorderd subtransaction contents when they were spilled to disk.
Move spilling of the remaining in-memory changes to
ReorderBufferIterTXNInit(), where it can easily be applied to the top
transaction and, if present, subtransactions.
Since this code had too many bugs already, noticeably increase test
coverage.
Fixes: #14319
Reported-By: Huan Ruan
Discussion: <20160909012610.20024.58169@wrigleys.postgresql.org>
Backport: 9,4-, where logical decoding was added
API and mechanism to allow generic messages to be inserted into WAL that are
intended to be read by logical decoding plugins. This commit adds an optional
new callback to the logical decoding API.
Messages are either text or bytea. Messages can be transactional, or not, and
are identified by a prefix to allow multiple concurrent decoding plugins.
(Not to be confused with Generic WAL records, which are intended to allow crash
recovery of extensible objects.)
Author: Petr Jelinek and Andres Freund
Reviewers: Artur Zakirov, Tomas Vondra, Simon Riggs
Discussion: 5685F999.6010202@2ndquadrant.com
Logical decoding's reorderbuffer keeps transactions in an LSN ordered
list for efficiency. To make that's efficiently possible upper-level
xids are forced to be logged before nested subtransaction xids. That
only works though if these records are all looked at: Unfortunately we
didn't do so for e.g. row level locks, which are otherwise uninteresting
for logical decoding.
This could lead to errors like:
"ERROR: subxact logged without previous toplevel record".
It's not sufficient to just look at row locking records, the xid could
appear first due to a lot of other types of records (which will trigger
the transaction to be marked logged with MarkCurrentTransactionIdLoggedIfAny).
So invent infrastructure to tell reorderbuffer about xids seen, when
they'd otherwise not pass through reorderbuffer.c.
Reported-By: Jarred Ward
Bug: #13844
Discussion: 20160105033249.1087.66040@wrigleys.postgresql.org
Backpatch: 9.4, where logical decoding was added
When adding replication origins in 5aa235042, I somehow managed to set
the timestamp of decoded transactions to InvalidXLogRecptr when decoding
one made without a replication origin. Fix that, and the wrong type of
the new commit_time variable.
This didn't trigger a regression test failure because we explicitly
don't show commit timestamps in the regression tests, as they obviously
are variable. Add a test that checks that a decoded commit's timestamp
is within minutes of NOW() from before the commit.
Reported-By: Weiping Qu
Diagnosed-By: Artur Zakirov
Discussion: 56D4197E.9050706@informatik.uni-kl.de,
56D42918.1010108@postgrespro.ru
Backpatch: 9.5, where 5aa235042 originates.
The "check" target no longer needs to depend on "all", because it now
runs "install" directly, which in turn depends on "all". Doing both
will cause problems with parallel make, because two builds will run next
to each other.
Also remove the redirection of the temp-install output into a log file.
This was appropriate when this was done from within pg_regress, but now
it's just a regular make run, and especially with the above changes this
will now take the place of running the "all" target before the test
suites.
problem report by Jeff Janes, patch in part by Michael Paquier
When implementing a replication solution ontop of logical decoding, two
related problems exist:
* How to safely keep track of replication progress
* How to change replication behavior, based on the origin of a row;
e.g. to avoid loops in bi-directional replication setups
The solution to these problems, as implemented here, consist out of
three parts:
1) 'replication origins', which identify nodes in a replication setup.
2) 'replication progress tracking', which remembers, for each
replication origin, how far replay has progressed in a efficient and
crash safe manner.
3) The ability to filter out changes performed on the behest of a
replication origin during logical decoding; this allows complex
replication topologies. E.g. by filtering all replayed changes out.
Most of this could also be implemented in "userspace", e.g. by inserting
additional rows contain origin information, but that ends up being much
less efficient and more complicated. We don't want to require various
replication solutions to reimplement logic for this independently. The
infrastructure is intended to be generic enough to be reusable.
This infrastructure also replaces the 'nodeid' infrastructure of commit
timestamps. It is intended to provide all the former capabilities,
except that there's only 2^16 different origins; but now they integrate
with logical decoding. Additionally more functionality is accessible via
SQL. Since the commit timestamp infrastructure has also been introduced
in 9.5 (commit 73c986add) changing the API is not a problem.
For now the number of origins for which the replication progress can be
tracked simultaneously is determined by the max_replication_slots
GUC. That GUC is not a perfect match to configure this, but there
doesn't seem to be sufficient reason to introduce a separate new one.
Bumps both catversion and wal page magic.
Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer
Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer
Discussion: 20150216002155.GI15326@awork2.anarazel.de,
20140923182422.GA15776@alap3.anarazel.de,
20131114172632.GE7522@alap2.anarazel.de
Before, make check-world would create a new temporary installation for
each test suite, which is slow and wasteful. Instead, we now create one
test installation that is used by all test suites that are part of a
make run.
The management of the temporary installation is removed from pg_regress
and handled in the makefiles. This allows for better control, and
unifies the code with that of test suites not run through pg_regress.
review and msvc support by Michael Paquier <michael.paquier@gmail.com>
more review by Fabien Coelho <coelho@cri.ensmp.fr>
There are basically three situations in which logical decoding needs
to perform cache invalidation. During/After replaying a transaction
with catalog changes, when skipping a uninteresting transaction that
performed catalog changes and when erroring out while replaying a
transaction. Unfortunately these three cases were all done slightly
differently - partially because 8de3e410fa, which greatly simplifies
matters, got committed in the midst of the development of logical
decoding.
The actually problematic case was when logical decoding skipped
transaction commits (and thus processed invalidations). When used via
the SQL interface cache invalidation could access the catalog - bad,
because we didn't set up enough state to allow that correctly. It'd
not be hard to setup sufficient state, but the simpler solution is to
always perform cache invalidation outside a valid transaction.
Also make the different cache invalidation cases look as similar as
possible, to ease code review.
This fixes the assertion failure reported by Antonin Houska in
53EE02D9.7040702@gmail.com. The presented testcase has been expanded
into a regression test.
Backpatch to 9.4, where logical decoding was introduced.
Heikki noticed in 544E23C0.8090605@vmware.com that slot.c and
snapbuild.c were missing the FIN_CRC32 call when computing/checking
checksums of on disk files. That doesn't lower the the error detection
capabilities of the checksum, but is inconsistent with other usages.
In a followup mail Heikki also noticed that, contrary to a comment,
the 'version' and 'length' struct fields of replication slot's on disk
data where not covered by the checksum. That's not likely to lead to
actually missed corruption as those fields are cross checked with the
expected version and the actual file length. But it's wrong
nonetheless.
As fixing these issues makes existing on disk files unreadable, bump
the expected versions of on disk files for both slots and logical
decoding historic catalog snapshots. This means that loading old
files will fail with
ERROR: "replication slot file ... has unsupported version 1"
and
ERROR: "snapbuild state file ... has unsupported version 1 instead of
2" respectively. Given the low likelihood of anybody already using
these new features in a production setup that seems acceptable.
Fixing these issues made me notice that there's no regression test
covering the loading of historic snapshot from disk - so add one.
Backpatch to 9.4 where these features were introduced.
Prominent binaries already had this metadata. A handful of minor
binaries, such as pg_regress.exe, still lack it; efforts to eliminate
such exceptions are welcome.
Michael Paquier, reviewed by MauMau.
contrib/test_decoding's "make check" runs two sets of tests. Unless we
specify separate output directories for each set the isolation tests
will overwrite the output from the normal regression set. Doing this
will help the buildfarm collect complete logs.
This feature, building on previous commits, allows the write-ahead log
stream to be decoded into a series of logical changes; that is,
inserts, updates, and deletes and the transactions which contain them.
It is capable of handling decoding even across changes to the schema
of the effected tables. The output format is controlled by a
so-called "output plugin"; an example is included. To make use of
this in a real replication system, the output plugin will need to be
modified to produce output in the format appropriate to that system,
and to perform filtering.
Currently, information can be extracted from the logical decoding
system only via SQL; future commits will add the ability to stream
changes via walsender.
Andres Freund, with review and other contributions from many other
people, including Álvaro Herrera, Abhijit Menon-Sen, Peter Gheogegan,
Kevin Grittner, Robert Haas, Heikki Linnakangas, Fujii Masao, Abhijit
Menon-Sen, Michael Paquier, Simon Riggs, Craig Ringer, and Steve
Singer.