Starting with commit f0e44751d7, ExecConstraints was in charge of
running the partition constraint; commit 19c47e7c82 modified that so
that caller could request to skip that checking depending on some
conditions, but that commit and 15ce775faa together introduced a small
bug there which caused ExecInsert to request skipping the constraint
check but have this not be honored -- in effect doing the check twice.
This could have been fixed in a very small patch, but on further
analysis of the involved function and its callsites, it turns out to be
simpler to give the responsibility of checking the partition constraint
fully to the caller, and return ExecConstraints to its original
(pre-partitioning) shape where it only checked tuple descriptor-related
constraints. Each caller must do partition constraint checking on its
own schedule, which is more convenient after commit 2f17844104 anyway.
Reported-by: David Rowley
Author: David Rowley, Álvaro Herrera
Reviewed-by: Amit Langote, Amit Khandekar, Simon Riggs
Discussion: https://postgr.es/m/CAKJS1f8w8+awsxgea8wt7_UX8qzOQ=Tm1LD+U1fHqBAkXxkW2w@mail.gmail.com
Also add a function that centralizes the logic for locating all our perl
files and use it in pgperlcritic and pgperltidy as well as the new
pgperlcheck.
The previous coding just ignored pruning constraints that compare a
partition key to a null-valued expression. This is silly, since really
what we can do there is conclude that all partitions are rejected: the
pruning operator is known strict so the comparison must always fail.
This also fixes the logic to not ignore constisnull for a Const comparison
value. That's probably an unreachable case, since the planner would
normally have simplified away a strict operator with a constant-null input.
But this code has no business assuming that.
David Rowley, per a gripe from me
Discussion: https://postgr.es/m/26279.1528670981@sss.pgh.pa.us
A review of the code has showed up a couple of issues fixed by this
commit:
- Physical slots have been using the confirmed LSN position as a start
comparison point which is always 0/0, instead use the restart LSN
position (logical slots need to use the confirmed LSN position, which
was correct).
- The actual slot update was incorrect for both physical and logical
slots. Physical slots need to use their restart_lsn as base comparison
point (confirmed_flush was used because of previous point), and logical
slots need to begin reading WAL from restart_lsn (confirmed_flush was
used as well), while confirmed_flush is compiled depending on the
decoding context and record read, and is the LSN position returned back
to the caller.
- Never return 0/0 if a slot cannot be advanced. This way, if a slot is
advanced while the activity is idle, then the same position is returned
to the caller over and over without raising an error. Instead return
the LSN the slot has been advanced to. With repetitive calls, the same
position is returned hence caller can directly monitor the difference in
progress in bytes by doing simply LSN difference calculations, which
should be monotonic.
Note that as the slot is owned by the backend advancing it, then the
read of those fields is fine lock-less, while updates need to happen
while the slot mutex is held, so fix that on the way as well. Other
locks for in-memory data of replication slots have been already fixed
previously.
Some of those issues have been pointed out by Petr and Simon during the
patch, while I noticed some of them after looking at the code. This
also visibly takes of a recently-discovered bug causing assertion
failures which can be triggered by a two-step slot forwarding which
first advanced the slot to a WAL page boundary and secondly advanced it
to the latest position, say 'FF/FFFFFFF' to make sure that the newest
LSN is used as forward point. It would have been nice to drop a test
for that, but the set of operators working on pg_lsn limits it, so this
is left for a future exercise.
Author: Michael Paquier
Reviewed-by: Petr Jelinek, Simon Riggs
Discussion: https://postgr.es/m/CANP8+jLyS=X-CAk59BJnsxKQfjwrmKicHQykyn52Qj-Q=9GLCw@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/2840048a-1184-417a-9da8-3299d207a1d7%40postgrespro.ru
These struct definitions were originally dropped into primnodes.h,
which is a poor choice since that's mainly intended for primitive
expression node types; these are not in that category. What they
are is auxiliary info in Plan trees, so move them to plannodes.h.
For consistency, also relocate some related code that was apparently
placed with the aid of a dartboard.
There's no interesting code changes in this commit, just reshuffling.
David Rowley and Tom Lane
Discussion: https://postgr.es/m/CAFj8pRBjrufA3ocDm8o4LPGNye9Y+pm1b9kCwode4X04CULG3g@mail.gmail.com
The initial coding of the run-time-pruning feature only coped with cases
where the partition key(s) are compared to Params. That is a bit silly;
we can allow it to work with any non-Var-containing stable expression, as
long as we take special care with expressions containing PARAM_EXEC Params.
The code is hardly any longer this way, and it's considerably clearer
(IMO at least). Per gripe from Pavel Stehule.
David Rowley, whacked around a bit by me
Discussion: https://postgr.es/m/CAFj8pRBjrufA3ocDm8o4LPGNye9Y+pm1b9kCwode4X04CULG3g@mail.gmail.com
While debugging issues on HEAD for the new slot forwarding feature of
Postgres 11, some monitoring of the code surrounding in-memory slot data
has proved that the lock handling may cause inconsistent data to be read
by read-only callers of slot functions, particularly
pg_get_replication_slots() which fetches data for the system view
pg_replication_slots, or modules looking directly at slot information.
The code paths involved in those problems concern logical decoding
initialization (down to 9.4) and WAL reservation for slots (new as of
10).
A set of comments documenting all the lock handlings, particularly the
dependency with LW locks for slots and the in_use flag as well as the
internal mutex lock is added, based on a suggested by Simon Riggs.
Some of the fixed code exists down to 9.4 where WAL decoding has been
introduced, but as those race conditions are really unlikely going to
happen as those concern code paths for slot and decoding creation, just
fix the problem on HEAD.
Author: Michael Paquier
Discussion: https://postgr.es/m/20180528085747.GA27845@paquier.xyz
Make sure that we don't exceed MaxAllocSize when increasing the number of
buckets. Perhaps later we'll remove that limit and use DSA_ALLOC_HUGE, but
for now just prevent further increases like the non-parallel code. This
change avoids the error from bug report #15225.
Author: Thomas Munro
Reviewed-By: Tom Lane
Reported-by: Frits Jalvingh
Discussion: https://postgr.es/m/152802081668.26724.16985037679312485972%40wrigleys.postgresql.org
Also, fix the pg_settings view to display source filename and line
number when invoked by a pg_read_all_settings member. This addition by
me (Álvaro).
Also, fix wording of the comment in GetConfigOption regarding the
restriction it implements, renaming the parameter for extra clarity.
Noted by Michaël.
These were all oversight in commit 25fff40798fc; backpatch to pg10,
where that commit first appeared.
Author: Laurenz Albe
Reviewed-by: Michaël Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/1519917758.6586.8.camel@cybertec.at
GetRunningTransactionData() should ignore VACUUM procs because in some
cases they are assigned xids. This could lead to holding back xmin via
the route of passing the xid to standby and then having that hold back
xmin on master via feedback.
Backpatch to 9.1 needed, but will only do so on supported versions.
Backpatch once proven on the buildfarm.
Reported-by: Greg Stark
Author: Simon Riggs
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CANP8+jJBYt=4PpTfiPb0UrH1_iPhzsxKH5Op_Wec634F0ohnAw@mail.gmail.com
This bug causes a lseek() failure to be reported as a "could not open"
failure in the error message, muddling bug reports. I introduced this
copy-and-pasteo in commit 78e1220104.
Noticed while reviewing code for bug report #15221, from lily liang. In
version 10 the affected function is only used by multixact.c and
commit_ts, and only in corner-case circumstances, neither of which are
involved in the reported bug (a pg_subtrans failure.)
Author: Álvaro Herrera
This patch does two things. First, it silences a number of compile-time
warnings in the msvc tools files, mainly those due to the fact that in
some cases we have more than one package per file. Second it supplies a
dummy Perl library with just enough of the Windows API referred to in
our code to let it run these checks cleanly, even on Unix machines where
the code is never supposed to run. The dummy library should only be used
for that purpose, as its README notes.
Any changes on page should be done in critical section, so move
_bt_upgrademetapage into critical section. Improve comment. Found by Amit
Kapila during post-commit review of 857f9c36.
Author: Amit Kapila
Use palloc0() instead of palloc() to create a new JsonbIterator.
Otherwise, the isScalar field is sometimes not initialized. There is
probably no impact in practice, but it's cleaner this way and it avoids
future problems.
Commit 3a7cc727c was a little over eager about adding an explicit return
to this function, whose value is checked in most call sites. This change
reverses that and returns the expected value explicitly. It also adds a
check to the one call site lacking one.
This complies with the perlcritic policy
Subroutines::RequireFinalReturn, which is a severity 4 policy. Since we
only currently check at severity level 5, the policy is raised to that
level until we move to level 4 or lower, so that any new infringements
will be caught.
A small cosmetic piece of tidying of the pgperlcritic script is
included.
Mike Blackwell
Discussion: https://postgr.es/m/CAESHdJpfFm_9wQnQ3koY3c91FoRQsO-fh02za9R3OEMndOn84A@mail.gmail.com
To distinguish SQL statements that are INSERT/UPDATE/DELETE from other
ones, exec_stmt_execsql looked at the post-rewrite form of the statement
rather than the original. This is problematic because it did that only
during first execution of the statement (in a session), but the correct
answer could change later due to addition or removal of DO INSTEAD rules
during the session. That could lead to an Assert failure, as reported
by Tushar Ahuja and Robert Haas. In non-assert builds, there's a hazard
that we would fail to enforce STRICT behavior when we'd be expected to.
That would happen if an initially present DO INSTEAD, that replaced the
original statement with one of a different type, were removed; after that
the statement should act "normally", including strictness enforcement, but
it didn't. (The converse case of enforcing strictness when we shouldn't
doesn't seem to be a hazard, as addition of a DO INSTEAD that changes the
statement type would always lead to acting as though the statement returned
zero rows, so that the strictness error could not fire.)
To fix, inspect the original form of the statement not the post-rewrite
form, making it valid to assume the answer can't change intra-session.
This should lead to the same answer in every case except when there is a
DO INSTEAD that changes the statement type; we will now set mod_stmt=true
anyway, while we would not have done so before. That breaks the Assert
in the SPI_OK_REWRITTEN code path, which expected the latter behavior.
It might be all right to assert mod_stmt rather than !mod_stmt there,
but I'm not entirely convinced that that'd always hold, so just remove
the assertion altogether.
This has been broken for a long time, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/CA+TgmoZUrRN4xvZe_BbBn_Xp0BDwuMEue-0OyF0fJpfvU2Yc7Q@mail.gmail.com
Print columns as "column C of <relation>" rather than "<relation> column
C". This seems to read noticeably better in English, as evidenced by the
regression test output changes, and the code change also makes it possible
for translators to adjust the phrase order in other languages.
Also change the output for OCLASS_DEFAULT from "default for %s" to
"default value for %s". This seems to read better and is also more
consistent with the output of, for instance, getObjectTypeDescription().
Kyotaro Horiguchi, per a complaint from me
Discussion: https://postgr.es/m/20180522.182020.114074746.horiguchi.kyotaro@lab.ntt.co.jp
Refactor some cases in getObjectDescription so that the translator has
more control over phrase order in the translated messages. This doesn't
cause any changes in the English results. (I was sorely tempted to
reorder "... belonging to role %s in schema %s" into "... in schema %s
belonging to role %s", but refrained.)
In principle we could back-patch this, but since translators have not
complained about these cases previously, it seems better not to thrash
the translatable strings in back branches.
Kyotaro Horiguchi, tweaked a bit by me
Discussion: https://postgr.es/m/20180522.182020.114074746.horiguchi.kyotaro@lab.ntt.co.jp
getObjectDescription and getObjectIdentity failed to schema-qualify
the name of the published table, which is bad in getObjectDescription and
unforgivable in getObjectIdentity. Actually, getObjectIdentity failed to
emit the table's name at all unless "objname" output is requested, which
accidentally works for some (all?) extant callers but is clearly not the
intended API. Somebody had also not gotten the memo that the output of
getObjectIdentity is not to be translated.
To fix getObjectDescription, I made it call getRelationDescription, which
required refactoring the translatable string for the case, but is more
future-proof in case we ever publish relations that aren't plain tables.
While at it, I made the English output look like "publication of table X
in publication Y"; the added "of" seems to me to make it read much better.
Back-patch to v10 where publications were introduced.
Discussion: https://postgr.es/m/20180522.182020.114074746.horiguchi.kyotaro@lab.ntt.co.jp
Collations, conversions, extended statistics objects (in >= v10),
and all four types of text search objects have schema-qualified names.
getObjectDescription() ignored that and would emit just the base name of
the object, potentially producing wrong or at least highly misleading
output. Fix it to add the schema name whenever the object is not "visible"
in the current search path, as is the rule for other schema-qualifiable
object types.
Although in common situations the output won't change, this seems to me
(tgl) to be a bug worthy of back-patching, hence do so.
Kyotaro Horiguchi, per a complaint from me
Discussion: https://postgr.es/m/20180522.182020.114074746.horiguchi.kyotaro@lab.ntt.co.jp
Now that the Working with git wiki page no longer suggests producing
context diffs, we should preserve the information on how to use
git-external-diff for those people who want to view context format
diffs. The most obvious place is in the script itself, so that's what's
done here.
If echo = false, simple_prompt() is supposed to prevent echoing the
input (for password input). However, the Windows implementation applied
the mode change to STD_INPUT_HANDLE. That would not have the desired
effect if stdin isn't actually the terminal, for instance if the user
is piping something into psql. Fix it to apply the mode change to
the correct input file, so that passwords do not echo in such cases.
In passing, shorten and de-uglify this code by using #elif rather than
an #if nest and removing some duplicated code.
Back-patch to all supported versions. To simplify that, also back-patch
the portions of commit 9daec77e1 that got rid of an unnecessary
malloc/free in the same area.
Matthew Stickney (cosmetic changes by me)
Discussion: https://postgr.es/m/502a1fff-862b-da52-1031-f68df6ed5a2d@gmail.com
We used to claim to support platforms using 'q' or 'I64' as the printf
length modifier for long long int, by dint of replacing snprintf with
our own code which uses the C99 standard 'll' modifier. But that is
only adequate if we use INT64_MODIFIER only in snprintf-based calls,
not directly with the platform's native printf or fprintf. Which
hasn't been the case for years. We had not noticed, partially because
of inadequate test coverage, and partially because the buildfarm is
almost completely bare of machines that won't take 'll'. The last
one seems to have been frogmouth, which was adjusted recently so that
it will take 'll'. We might as well just give up on the pretense
that anything else works, and save ourselves some configure cycles.
Discussion: https://postgr.es/m/13103.1526749980@sss.pgh.pa.us
Discussion: https://postgr.es/m/24769.1526772680@sss.pgh.pa.us
Commit c37b3d08c dropped its added GetDataDirectoryCreatePerm call into
the wrong place in pg_resetwal.c, namely after the chdir to DataDir.
That broke invocations using a relative path, as reported by Tushar Ahuja.
We could have left it where it was and changed the argument to be ".",
but that'd result in a rather confusing error message in event of a
failure, so re-ordering seems like a better solution.
Similarly reorder operations in pg_rewind.c. The issue there is that
it doesn't seem like a good idea to do any actual operations before the
not-root check (on Unix) or the restricted token acquisition (on Windows).
I don't know that this is an actual bug, but I'm definitely not convinced
that it isn't, either.
Assorted other code review for c37b3d08c and da9b580d8: fix some
misspelled or otherwise badly worded comments, put the #include for
<sys/stat.h> where it actually belongs, etc.
Discussion: https://postgr.es/m/aeb9c3a7-3c3f-a57f-1a18-c8d4fcdc2a1f@enterprisedb.com
Commit 6e7baa3227 added support for "B" unit, for specifying config options
in bytes. However, it was only accepted in GUC_UNIT_BYTE settings,
wal_segment_size and track_activity_query_size, and not e.g. in work_mem.
This patch makes it consistent, so that "B" accepted in all the same
contexts where "kB", "MB", and so forth are accepted.
Add "B" to the list of accepted units in the error hint, along with "kB",
"MB", etc.
Add an entry in the conversion table for "TB" to "B" conversion. A terabyte
is out of range for any GUC_UNIT_BYTE option, so you always get an "out of
range" error with that, but without it, you get a confusing error message
that claims that "TB" is not an accepted unit, with a hint that nevertheless
lists "TB" as an accepted unit.
Reviewed-by: Alexander Korotkov, Andres Freund
Discussion: https://www.postgresql.org/message-id/1bfe7f4a-7e22-aa6e-7b37-f4d222ed2d67@iki.fi
Because the code for the HEADER option skips a line when this counter
is zero, a very long COPY FROM WITH HEADER operation would drop a line
every 2^32 lines. A lesser but still unfortunate problem is that errors
would show a wrong input line number for errors occurring beyond the
2^31'st input line. While such large input streams seemed impractical
when this code was first written, they're not any more. Widening the
counter (and some associated variables) to uint64 should be enough to
prevent problems for the foreseeable future.
David Rowley
Discussion: https://postgr.es/m/CAKJS1f88yh-6wwEfO6QLEEvH3BEugOq2QX1TOja0vCauoynmOQ@mail.gmail.com
OFFSET <x> ROWS FETCH FIRST <y> ROWS ONLY syntax is supposed to accept
<simple value specification>, which includes parameters as well as
literals. When this syntax was added all those years ago, it was done
inconsistently, with <x> and <y> being different subsets of the
standard syntax.
Rectify that by making <x> and <y> accept the same thing, and allowing
either a (signed) numeric literal or a c_expr there, which allows for
parameters, variables, and parenthesized arbitrary expressions.
Per bug #15200 from Lukas Eder.
Backpatch all the way, since this has been broken from the start.
Discussion: https://postgr.es/m/877enz476l.fsf@news-spur.riddles.org.uk
Discussion: http://postgr.es/m/152647780335.27204.16895288237122418685@wrigleys.postgresql.org
This is the converse of the unsafe-usage-of-%m problem: the reason
ereport/elog provide that format code is mainly to dodge the hazard
of errno getting changed before control reaches functions within the
arguments of the macro. I only found one instance of this hazard,
but it's been there since 9.4 :-(.
While glibc's version of printf accepts %m, most others do not;
to be portable, we have to do it the hard way with strerror(errno).
pg_verify_checksums evidently did not get that memo.
Noted while fooling around with NetBSD-current, which generates
a compiler warning for this mistake.
The "l" (ell) width spec means something in the corresponding scanf usage,
but not here. While modern POSIX says that applying "l" to "f" and other
floating format specs is a no-op, SUSv2 says it's undefined. Buildfarm
experience says that some old compilers emit warnings about it, and at
least one old stdio implementation (mingw's "ANSI" option) actually
produces wrong answers and/or crashes.
Discussion: https://postgr.es/m/21670.1526769114@sss.pgh.pa.us
Discussion: https://postgr.es/m/c085e1da-0d64-1c15-242d-c921f32e0d5c@dunslane.net
FindDefinedSymbol was intended to take an array of possible include
paths, but it never actually worked correctly for any but the first
array element. Since there's no use-case for more than one path
anyway, let's just simplify this code and its callers by redefining
it as taking only one include path.
Minor other code-beautification without functional effects, except
that in one place we format the output as pgindent would do.
John Naylor
Discussion: https://postgr.es/m/CAJVSVGXM_n32hTTkircW4_K1LQFsJNb6xjs0pAP4QC0ZpyJfPQ@mail.gmail.com
Ancient HPUX, for one, does this. We hadn't noticed due to the lack
of regression tests that required a working strtoll.
(I was slightly tempted to remove the other historical spelling,
strto[u]q, since it seems we have no buildfarm members testing that case.
But I refrained.)
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
Buildfarm member dromedary is still unhappy about the recently-added
ecpg "long long" tests. The reason turns out to be that it includes
"-ansi" in its CFLAGS, and in their infinite wisdom Apple have decided
to hide the declarations of strtoll/strtoull in C89-compliant builds.
(I find it pretty curious that they hide those function declarations
when you can nonetheless declare a "long long" variable, but anyway
that is their behavior, both on dromedary's obsolete macOS version and
the newest and shiniest.) As a result, gcc assumes these functions
return "int", leading naturally to wrong results.
(Looking at dromedary's past build results, it's evident that this
problem also breaks pg_strtouint64() on 32-bit platforms; but we
evidently have no regression tests that exercise that function with
values above 32 bits.)
To fix, supply declarations for these functions when the platform
provides the functions but not the declarations, using the same type
of mechanism as we use for some other similar cases.
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
This will only actually exercise the "long long" code paths on platforms
where "long" is 32 bits --- otherwise, the SQL bigint type maps to
plain "long", and we will test that code path instead. But that's
probably sufficient coverage, and anyway we weren't testing either
code path before.
Dang Minh Huong, tweaked a bit by me
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
This is needed for full support of "long long" variables in ecpg, but
the previous patch for bug #15080 (commits 51057feaa et al) missed it.
In MSVC versions where the functions don't exist under those names,
we can nonetheless use _strtoi64() and _strtoui64().
Like the previous patch, back-patch all the way.
Dang Minh Huong
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
Use DISCARD PLANS instead of a reconnect to force reconstruction of
a cached plan; this corresponds more nearly to what people might
actually do in practice.
Commit bad51a49a tried to use a shortcut with just one stamp file
recording the actions of generating the pg_*_d.h headers and copying
them to the src/include/catalog/ directory. That doesn't work in all
scenarios though, so we must use two stamp files like the Makefiles do.
John Naylor
Discussion: https://postgr.es/m/CANFyU944GdHr=puPbA78STnqr=8kgMrGF-VDHck6aO_-qNDALg@mail.gmail.com
In commit 6bdf1303b, we ensured that power()/^ for float8 would honor
the NaN behaviors specified by POSIX standards released in this century,
ie NaN ^ 0 = 1 and 1 ^ NaN = 1. However, numeric_power() was not
touched and continued to follow the once-common behavior that every
case involving NaN input produces NaN. For consistency, let's switch
the numeric behavior to the modern spec in the same release that ensures
that behavior for float8.
(Note that while 6bdf1303b was initially back-patched, we later undid
that, concluding that any behavioral change should appear only in v11.)
Discussion: https://postgr.es/m/10898.1526421338@sss.pgh.pa.us
Up to now, it's been safe for plpgsql to store TOAST pointers in its
variables because the ActiveSnapshot for whatever query called the plpgsql
function will surely protect such TOAST values from being vacuumed away,
even if the owning table rows are committed dead. With the introduction of
procedures, that assumption is no longer good in "non atomic" executions
of plpgsql code. We adopt the slightly brute-force solution of detoasting
all TOAST pointers at the time they are stored into variables, if we're in
a non-atomic context, just in case the owning row goes away.
Some care is needed to avoid long-term memory leaks, since plpgsql tends
to run with CurrentMemoryContext pointing to its call-lifespan context,
but we shouldn't assume that no memory is leaked by heap_tuple_fetch_attr.
In plpgsql proper, we can do the detoasting work in the "eval_mcontext".
Most of the code thrashing here is due to the need to add this capability
to expandedrecord.c as well as plpgsql proper. In expandedrecord.c,
we can't assume that the caller's context is short-lived, so make use of
the short-term sub-context that was already invented for checking domain
constraints. In view of this repurposing, it seems good to rename that
variable and associated code from "domain_check_cxt" to "short_term_cxt".
Peter Eisentraut and Tom Lane
Discussion: https://postgr.es/m/5AC06865.9050005@anastigmatix.net
canonicalize_ec_expression() is supposed to agree with coerce_type() as to
whether a RelabelType should be inserted to make a subexpression be valid
input for the operators of a given opclass. However, it did the wrong
thing with named-composite-type inputs to record_eq(): it put in a
RelabelType to RECORDOID, which the parser doesn't. In some cases this was
harmless because all code paths involving a particular equivalence class
did the same thing, but in other cases this would result in failing to
recognize a composite-type expression as being a member of an equivalence
class that it actually is a member of. The most obvious bad effect was to
fail to recognize that an index on a composite column could provide the
sort order needed for a mergejoin on that column, as reported by Teodor
Sigaev. I think there might be other, subtler, cases that result in
misoptimization. It also seems possible that an unwanted RelabelType
would sometimes get into an emitted plan --- but because record_eq and
friends don't examine the declared type of their input expressions, that
would not create any visible problems.
To fix, just treat RECORDOID as if it were a polymorphic type, which in
some sense it is. We might want to consider formalizing that a bit more
someday, but for the moment this seems to be the only place where an
IsPolymorphicType() test ought to include RECORDOID as well.
This has been broken for a long time, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/a6b22369-e3bf-4d49-f59d-0c41d3551e81@sigaev.ru
Previously, we passed the toplevel PlannerInfo, but we actually want
to pass the relevant subroot. One problem with passing the toplevel
PlannerInfo is that the FDW which wants to push down an UPDATE or
DELETE against a join won't find the relevant joinrel there.
As of commit 1bc0100d27, postgres_fdw
tries to do exactly this and can be made to fail an assertion as a
result.
It's possible that this should be regarded as a bug fix and
back-patched to earlier releases, but for lack of a test case that
fails in earlier releases, no back-patch for now.
Etsuro Fujita, reviewed by Amit Langote.
Discussion: http://postgr.es/m/5AF43E02.30000@lab.ntt.co.jp
The impact of VARIADIC on the combine/serialize/deserialize support
functions of an aggregate wasn't thought through carefully. There is
actually no impact, because variadicity isn't passed through to these
functions (and it doesn't seem like it would need to be). However,
lookup_agg_function was mistakenly told to check things as though it were
passed through. The net result was that it was impossible to declare an
aggregate that had both VARIADIC input and parallelism support functions.
In passing, fix a runtime check in nodeAgg.c for the combine function's
strictness to make its error message agree with the creation-time check.
The previous message was actually backwards, and it doesn't seem like
there's a good reason to have two versions of this message text anyway.
Back-patch to 9.6 where parallel aggregation was introduced.
Alexey Bashtanov; message fix by me
Discussion: https://postgr.es/m/f86dde87-fef4-71eb-0480-62754aaca01b@imap.cc
Creating indexes on foreign tables is already forbidden, but local
partitioned indexes (commit 8b08f7d482) forgot to check for them. Add
a preliminary check to prevent wasting time.
Another school of thought says to allow the index to be created if it's
not a unique index; but it's possible to do better in the future (enable
indexing of foreign tables, somehow), so we avoid painting ourselves in
a corner by rejecting all cases, to avoid future grief (a.k.a. backward
incompatible changes).
Reported-by: Arseny Sher
Author: Amit Langote, Álvaro Herrera
Discussion: https://postgr.es/m/87sh71cakz.fsf@ars-thinkpad
- Change vacuum_cleanup_index_scale_factor GUC to PGC_USERSET.
vacuum_cleanup_index_scale_factor GUC was defined as PGC_SIGHUP. But this
GUC affects not only autovacuum. So it might be useful to change it from user
session in order to influence manually runned VACUUM.
- Add missing tab-complete support for vacuum_cleanup_index_scale_factor
reloption.
- Fix condition for B-tree index cleanup.
Zero value of vacuum_cleanup_index_scale_factor means that user wants B-tree
index cleanup to be never skipped.
- Documentation and comment improvements
Authors: Justin Pryzby, Alexander Korotkov, Liudmila Mantrova
Reviewed by: all authors and Robert Haas
Discussion: https://www.postgresql.org/message-id/flat/20180502023025.GD7631%40telsasoft.com
DST law changes in North Korea. Redefinition of "daylight savings" in
Ireland, as well as for some past years in Namibia and Czechoslovakia.
Additional historical corrections for Czechoslovakia.
With this change, the IANA database models Irish timekeeping as following
"standard time" in summer, and "daylight savings" in winter, so that the
daylight savings offset is one hour behind standard time not one hour
ahead. This does not change their UTC offset (+1:00 in summer, 0:00 in
winter) nor their timezone abbreviations (IST in summer, GMT in winter),
though now "IST" is more correctly read as "Irish Standard Time" not "Irish
Summer Time". However, the "is_dst" column in the pg_timezone_names view
will now be true in winter and false in summer for the Europe/Dublin zone.
Similar changes were made for Namibia between 1994 and 2017, and for
Czechoslovakia between 1946 and 1947.
So far as I can find, no Postgres internal logic cares about which way
tm_isdst is reported; in particular, since commit b2cbced9e we do not
rely on it to decide how to interpret ambiguous timestamps during DST
transitions. So I don't think this change will affect any Postgres
behavior other than the timezone-view outputs.
Discussion: https://postgr.es/m/30996.1525445902@sss.pgh.pa.us
match_clause_to_partition_key failed to consider COERCION_PATH_ARRAYCOERCE
cases in scalar-op-array expressions, so it was possible to crash the
server easily. To handle this case properly (ie. prune partitions) we
would need to run a bit of executor code during planning. Maybe it can
be improved, but for now let's just not crash. Add a test case that
used to trigger the crash.
Author: Michaël Paquier
match_clause_to_partition_key failed to indicate that operators that
don't have a commutator in a btree opclass are unsupported. It is
possible for this to cause a crash later if such an operator is used in
a scalar-op-array expression. Add a test case that used to the crash.
Author: Amit Langote
One caller of gen_partprune_steps_internal in
match_clause_to_partition_key was too optimistic about the former never
returning an empty step list. Rid it of its innocence. (Having fixed
the bug above, I no longer know how to exploit this, so no test case for
it, but it remained a bug.) Revise code flow a little bit, for
succintness.
Author: Álvaro Herrera
Reported-by: Marina Polyakova
Reviewed-by: Michaël Paquier
Reviewed-by: Amit Langote
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/ff8f9bfa485ff961d6bb43e54120485b@postgrespro.ru
The vertical tightness settings collapse vertical whitespace between
opening and closing brackets (parentheses, square brakets and braces).
This can make data structures in particular harder to read, and is not
very consistent with our style in non-Perl code. This patch restricts
that setting to parentheses only, and reformats all the perl code
accordingly. Not applying this to parentheses has some unfortunate
effects, so the consensus is to keep the setting for parentheses and not
for the others.
The diff for this patch does highlight some places where structures
should have trailing commas. They can be added manually, as there is no
automatic tool to do so.
Discussion: https://postgr.es/m/a2f2b87c-56be-c070-bfc0-36288b4b41c1@2ndQuadrant.com
There's no need to export this function, so don't. Michaël didn't
actually write the patch, but we list him as first author because with a
trivial one like this, intellectual authorship is as important (if not
more) as bit shovelling.
Author: Michaël Paquier, Amit Langote
Discussion: https://postgr.es/m/c91299c4-199b-0f16-339b-a29d6d2a39ee@lab.ntt.co.jp
The regexes used in 102_vacuumdb_stages.pl to check the postmaster log
for expected output contained several places with ".*.*", which is
underdetermined and can cause exponential runtime growth in Perl's regex
matcher (since it's not bright enough not to waste time seeing whether
different splits of the same substring would allow a match). We were
fortunate that the amount of text in the postmaster log was generally not
enough to make the runtime go to the moon; although commit 6271fceb8 had
been on the hairy edge of an obvious problem, thanks to its increasing the
default log verbosity to DEBUG1. Experimentation shows that anyone who
tried to run this test case with an even higher log verbosity would have
been in for serious pain. But even at default logging level, fixing this
saves several hundred ms on my workstation, more on slower buildfarm
members.
Remove the extra ".*"s, restoring more-or-less-linear matching speed.
Back-patch to 9.4 where the test case was added, mostly in case anyone
tries to do related debugging in a back branch.
Discussion: https://postgr.es/m/32459.1525657786@sss.pgh.pa.us
While poking into initdb's performance, I noticed that this query
wasn't being done very intelligently. By forcing it to execute
obj_description() for each pg_proc/pg_operator join row, we were
essentially setting up a nestloop join to pg_description, which
is not a bright query plan when there are hundreds of outer rows.
Convert the check for a "deprecated" operator into a NOT EXISTS
so that it can be done as a hashed antijoin. On my workstation
this reduces the time for this query from ~ 35ms to ~ 10ms.
Which is not a huge win, but it adds up over buildfarm runs.
In passing, insert forced query breaks (\n\n, in single-user mode)
after each SQL-query file that initdb sources, and after some
relatively new queries in setup_privileges(). This doesn't make
a lot of difference normally, but it will result in briefer, saner
error messages if anything goes wrong.
Brown-paper-bag bug in commit 7c91a0364: when we rearranged the placement
of "reltuples += 1" statements, we missed including one in this code path.
The net effect of that was that CREATE INDEX CONCURRENTLY would set the
table's pg_class.reltuples to zero, as would index builds done during
bootstrap mode. (It seems like parallel index builds ought to fail
similarly, but they don't, perhaps because reltuples is computed in some
other way. You certainly couldn't figure that out from the abysmally
underdocumented parallelism code in this area.)
I was led to this by wondering why initdb seemed to have slowed down as
a result of 7c91a0364, as is evident in the buildfarm's timing history.
The reason is that every system catalog with indexes had pg_class.reltuples
= 0 after bootstrap, causing the planner to make some terrible choices for
queries in the post-bootstrap steps. On my workstation, this fix causes
the runtime of "initdb -N" to drop from ~2.0 sec to ~1.4 sec, which is
almost though not quite back to where it was in v10. That's not much of
a deal for production use perhaps, but it makes a noticeable difference
for buildfarm and "make check-world" runs, which do a lot of initdbs.
In Catalog.pm, mark eval of a string instead of a block as allowed.
Disallow perlcritic completely in Gen_dummy_probes.pl, as it's
generated code.
Protect a couple of lines in plperl code from perltidy, so that the
annotation for perlcritic stays on the same line as the construct it
would otherwise object to.
Commit 6271fceb8 changed PostgresNode.pm to force log_min_messages = debug1
in all TAP tests, without any discussion and without a concrete need for
it. This makes some of the TAP tests noticeably slower (although much of
that may be due to poorly-written regexes), and for certain it's bloating
the buildfarm logs. Revert the change.
Discussion: https://postgr.es/m/32459.1525657786@sss.pgh.pa.us
Commit 86f575948 already manually updated the oidjoins test for the
new pg_constraint.conparentid => pg_constraint.oid relationship, but
failed to update findoidjoins/README, thus the apparent inconsistency
here.
Michael Paquier
Discussion: https://postgr.es/m/20180507001811.GA27389@paquier.xyz
Most versions of "dtrace -h" drop const qualifiers from the declarations
of probe functions (though macOS gets it right). This causes compiler
warnings when we pass in pointers to const. Repair by extending our
existing post-processing of the probes.h file. To do so, assume that all
"char *" arguments should be "const char *"; that seems reasonably safe.
Thomas Munro
Discussion: https://postgr.es/m/CAEepm=2j1pWSruQJqJ91ZDzD8w9ZZDsM4j2C6x75C-VryWg-_w@mail.gmail.com
Mark Dilger pointed out that the bootstrap parser does not allow
any of its keywords to appear as column values unless they're quoted,
and proposed dealing with that by quoting such values in genbki.pl.
Looking closer, though, we also have that problem with respect to table,
column, and type names appearing in the .bki file: the parser would fail
if any of those matched any of its keywords. While so far there have
been no conflicts (that I've heard of), this seems like a booby trap
waiting to catch somebody. Rather than clutter genbki.pl with enough
quoting logic to handle all that, let's make the bootstrap parser grow
up a little bit and treat its keywords as unreserved.
Experimentation shows that it's fairly easy to do so with the exception
of _null_, which I don't have a big problem with keeping as a reserved
word. The only change needed is that we can't have the "close" command
take an optional table name: it has to either require or forbid the
table name to avoid shift/reduce conflicts. genbki.pl has historically
always included the table name, so I took that option.
The implementation has bootscanner.l passing forward the string value
of each keyword, in case bootparse.y needs that. This avoids needing to
know the precise spelling of each keyword in bootparse.y, which is good
because that's not always obvious from the token name.
Discussion: https://postgr.es/m/3024FC91-DB6D-4732-B31C-DF772DF039A0@gmail.com
This reverts commit 55e0e45817.
It's served its purpose of demonstrating what was wrong on
buildfarm member opossum. We could consider putting some kind
of single-purpose hack into ftod() to make the test pass there;
but I don't think it's worth the trouble, since there are surely
many other places whether this platform bug could manifest.
In commit 8b29e88cd, I'd dithered about whether to make
in_range_float4_float8 be a standalone copy of the float in-range logic
or have it punt to in_range_float8_float8. I went with the latter, which
saves code space though at the cost of performance and readability.
However, it emerges that this tickles a compiler or hardware bug on
buildfarm member opossum. Test results from commit 55e0e4581 show
conclusively that widening a float4 NaN to float8 produces Inf, not NaN,
on that machine; which accounts perfectly for the window RANGE test
failures it's been showing. We can dodge this problem by making
in_range_float4_float8 be an independent function, so that it checks
for NaN inputs before widening them.
Ordinarily I'd not be very excited about working around such obviously
broken functionality; but given that this was a judgment call to begin
with, I don't mind reversing it.
If a continuation record is split so that its first half has already been
removed from the master, and is only present in pg_wal, and there is a
recycled WAL segment in the standby server that looks like it would
contain the second half, recovery would get stuck. The code in
XLogPageRead() incorrectly started streaming at the beginning of the
WAL record, even if we had already read the first page.
Backpatch to 9.4. In principle, older versions have the same problem, but
without replication slots, there was no straightforward mechanism to
prevent the master from recycling old WAL that was still needed by standby.
Without such a mechanism, I think it's reasonable to assume that there's
enough slack in how many old segments are kept around to not run into this,
or you have a WAL archive.
Reported by Jonathon Nelson. Analysis and patch by Kyotaro HORIGUCHI, with
some extra comments by me.
Discussion: https://www.postgresql.org/message-id/CACJqAM3xVz0JY1XFDKPP%2BJoJAjoGx%3DGNuOAshEDWCext7BFvCQ%40mail.gmail.com
Dan Wood diagnosed a long-standing problem that pages containing tuples
that are locked by multixacts containing live lockers may spuriously end
up as candidates for getting their all-visible flag set. This has the
long-term effect that multixacts remain unfrozen; this may previously
pass undetected, but since commit XYZ it would be reported as
"ERROR: found multixact 134100944 from before relminmxid 192042633"
because when a later vacuum tries to freeze the page it detects that a
multixact that should have gotten frozen, wasn't.
Dan proposed a (correct) patch that simply sets a variable to its
correct value, after a bogus initialization. But, per discussion, it
seems better coding to avoid the bogus initializations altogether, since
they could give rise to more bugs later. Therefore this fix rewrites
the logic a little bit to avoid depending on the bogus initializations.
This bug was part of a family introduced in 9.6 by commit a892234f830e;
later, commit 38e9f90a22 fixed most of them, but this one was
unnoticed.
Authors: Dan Wood, Pavan Deolasee, Álvaro Herrera
Reviewed-by: Masahiko Sawada, Pavan Deolasee, Álvaro Herrera
Discussion: https://postgr.es/m/84EBAC55-F06D-4FBE-A3F3-8BDA093CE3E3@amazon.com
This should have been done some years ago as promised in commit
c4dcdd0c2. However, better late than never.
Along the way do a little housekeeping, including using a simpler test
for the python version being tested, and removing a redundant subroutine
parameter. These changes only apply back to release 9.5.
Backpatch to all live releases.
Msys2's uname -s outputs a string beginning MSYS rather than MINGW as is
output by Msys. Allow either in pg_upgrade's test.sh.
Backpatch to all live branches.
The non-cosmetic changes involve teaching the "zic" tzdata compiler about
negative DST. While I'm not currently intending that we start using
negative-DST data right away, it seems possible that somebody would try
to use our copy of zic with bleeding-edge IANA data. So we'd better be
out in front of this change code-wise, even though it doesn't matter for
the data file we're shipping.
Discussion: https://postgr.es/m/30996.1525445902@sss.pgh.pa.us
For querying pg_database about information about the database being
dumped, look up by using current_database() instead of the value
obtained from PQdb(). When using a connection proxy, the value from
PQdb() might not be the real name of the database.
nbtsort.c does not need to truncate away non-key attributes for the
minimum key of the leftmost page on a level, since this is only used to
build a minus infinity downlink for the level's leftmost page.
Truncating away non-key attributes in advance of truncating away all
attributes in _bt_sortaddtup() does not affect the correctness of CREATE
INDEX, but it is misleading.
Author: Peter Geoghegan
Discussion: https://www.postgresql.org/message-id/CAH2-WzkAS2M3ussHG-s_Av=Zo6dPjOxyu5fNRkYnxQV+YzGQ4w@mail.gmail.com
The principle behind the locking was not very well thought-out, and not
documented. Add a section in the README to explain how it's supposed to
work, and change the code so that it actually works that way.
This fixes two bugs:
1. If fast update was turned on concurrently, subsequent inserts to the
pending list would not conflict with predicate locks that were acquired
earlier, on entry pages. The included 'predicate-gin-fastupdate' test
demonstrates that. To fix, make all scans acquire a predicate lock on
the metapage. That lock represents a scan of the pending list, whether
or not there is a pending list at the moment. Forget about the
optimization to skip locking/checking for locks, when fastupdate=off.
2. If a scan finds no match, it still needs to lock the entry page. The
point of predicate locks is to lock the gabs between values, whether
or not there is a match. The included 'predicate-gin-nomatch' test
tests that case.
In addition to those two bug fixes, this removes some unnecessary locking,
following the principle laid out in the README. Because all items in
a posting tree have the same key value, a lock on the posting tree root is
enough to cover all the items. (With a very large posting tree, it would
possibly be better to lock the posting tree leaf pages instead, so that a
"skip scan" with a query like "A & B", you could avoid unnecessary conflict
if a new tuple is inserted with A but !B. But let's keep this simple.)
Also, some spelling fixes.
Author: Heikki Linnakangas with some editorization by me
Review: Andrey Borodin, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/0b3ad2c2-2692-62a9-3a04-5724f2af9114@iki.fi
We need to use a stamp file to record the runs of these scripts, as
is done on the Unix side. I think I got it right, but can't test.
While at it, extend this handmade dependency logic to also check the
generating script files, as the makefiles do.
Discussion: https://postgr.es/m/16925.1525376229@sss.pgh.pa.us
If a particular output file already exists with the contents it should
have, leave it alone, so that its mod timestamp is not advanced.
In builds using --enable-depend, this can avoid the need to recompile .c
files whose included files didn't actually change. It's not clear whether
it saves much of anything for users of ccache; but the cost of doing the
file comparisons seems to be negligible, so we might as well do it.
For developers using the MSVC toolchain, this will create a regression:
msvc/Solution.pm will sometimes run genbki.pl or Gen_fmgrtab.pl
unnecessarily. I'll look into fixing that separately.
Discussion: https://postgr.es/m/16925.1525376229@sss.pgh.pa.us
Make these rules look more like the ones associated with genbki.pl,
to wit:
* Use a stamp file to record when we last ran the script, instead of
relying on the timestamps of the individual output files.
* Take the knowledge out of backend/Makefile and put it in utils/Makefile
where it belongs. I moved down the handling of errcodes.h and probes.h
too, although those continue to be built by separate processes.
In itself, this is just much-needed cleanup with little practical effect.
However, by decoupling these makefile rules from the timestamps of the
generated header files, we open the door to not advancing those timestamps
unnecessarily, which will be taken advantage of by the next commit.
msvc/Solution.pm should be taught to do things similarly, but I'll leave
that for another commit.
Discussion: https://postgr.es/m/16925.1525376229@sss.pgh.pa.us
Python 3.7 removes the trailing comma in the repr() of
BaseException (see <https://bugs.python.org/issue30399>), leading to
test output differences. Work around that by composing the equivalent
test output in a more manual way.
If an interrupt arrives in the middle of FinishPreparedTransaction
and any callback decide to call CHECK_FOR_INTERRUPTS (e.g.
RemoveTwoPhaseFile can write a warning with ereport, which checks for
interrupts) then it's possible to leave current GXact undeleted.
Backpatch to all supported branches
Stas Kelvich
Discussion: ihttps://www.postgresql.org/message-id/3AD85097-A3F3-4EBA-99BD-C38EDF8D2949@postgrespro.ru
Unify indnkeys/indnatts/indnkeyatts usage for all version of query to get
index information, remove indnkeys column from query as unused.
Author: Marina Polyakova
Noticed by: Peter Eisentraut
Andrew Gierth pointed out that commit 1c72ec6f4 would yield the wrong
answer on big-endian ARM systems, because the data being CRC'd would be
different. To fix that, and avoid the rather unsightly hard-wired
constant, simply compare the hardware and software implementations'
results.
While we're at it, also log the resulting decision at DEBUG1, and error
out if the hw and sw results unexpectedly differ. Also, since this
file must compile for both frontend and backend, avoid incorrect
dependencies on backend-only headers.
In passing, add a comment to postmaster.c about when the CRC function
pointer will get initialized.
Thomas Munro, based on complaints from Andrew Gierth and Tom Lane
Discussion: https://postgr.es/m/HE1PR0801MB1323D171938EABC04FFE7FA9E3110@HE1PR0801MB1323.eurprd08.prod.outlook.com
Since the SPI stack has been moved from TopTransactionContext to
TopMemoryContext, setting _SPI_stack to NULL in AtEOXact_SPI() leaks
memory. In fact, we don't need to do that anymore: We just leave the
allocated stack around for the next SPI use.
Also, refactor the SPI cleanup so that it is run both at transaction end
and when returning to the main loop on an exception. The latter is
necessary when a procedure calls a COMMIT or ROLLBACK command that
itself causes an error.
Failure to use DatumGetFoo/FooGetDatum macros correctly, or at all,
causes some warnings about sign conversion. This is just cosmetic
at the moment but in principle it's a type violation, so clean up
the instances I could find.
autoprewarm.c and sharedfileset.c contained code that unportably
assumed that pid_t is the same size as int. We've variously dealt
with this by casting pid_t to int or to unsigned long for printing
purposes; I went with the latter.
Fix uninitialized-variable warning in RestoreGUCState. This is
a live bug in some sense, but of no great significance given that
nobody is very likely to care what "line number" is associated with
a GUC that hasn't got a source file recorded.
statext_dependencies_load and statext_ndistinct_load were not up to snuff,
in addition to being randomly different from each other. In detail:
* Deserialize the fetched bytea value before releasing the syscache
entry, not after. This mistake causes visible regression test failures
when running with -DCATCACHE_FORCE_RELEASE. Since it's not exposed by
-DCLOBBER_CACHE_ALWAYS, I think there may be no production hazard here
at present, but it's at least a latent bug.
* Use DatumGetByteaPP not DatumGetByteaP to save a detoasting cycle
for short stats values; the deserialize function has to be, and is,
prepared for short-header values since its other caller uses PP.
* Use a test-and-elog for null stats values in both functions, rather
than a test-and-elog in one case and an Assert in the other. Perhaps
Asserts would be sufficient in both cases, but I don't see a good
argument for them being different.
* Minor cosmetic changes to make these functions more visibly alike.
Backpatch to v10 where this code came in.
Amit Langote, minor additional hacking by me
Discussion: https://postgr.es/m/1349aabb-3a1f-6675-9fc0-65e2ce7491dd@lab.ntt.co.jp
There were three related issues:
* BufFileAppend() incorrectly reset the seek position on the 'source' file.
As a result, if you had called BufFileRead() on the file before calling
BufFileAppend(), it got confused, and subsequent calls would read/write
at wrong position.
* BufFileSize() did not work with files opened with BufFileOpenShared().
* FileGetSize() only worked on temporary files.
To fix, change the way BufFileSize() works so that it works on shared
files. Remove FileGetSize() altogether, as it's no longer needed. Remove
buffilesize from TapeShare struct, as the leader process can simply call
BufFileSize() to get the tape's size, there's no need to pass it through
shared memory anymore.
Discussion: https://www.postgresql.org/message-id/CAH2-WznEDYe_NZXxmnOfsoV54oFkTdMy7YLE2NPBLuttO96vTQ@mail.gmail.com
Tom's earlier commit in 41c912cad1 didn't update a few cases that
are only encountered with the non-standard --with-llvm config
flag. Additionally there's also one case that appears to be a
deficiency in gcc's (up to trunk as of a few days ago) detection of
"fallthrough" comments - changing the placement slightly fixes that.
Author: Andres Freund
Discussion: https://postgr.es/m/20180502003239.wfnqu7ekz7j7imm4@alap3.anarazel.de
Recent gcc can warn about switch-case fall throughs that are not
explicitly labeled as intentional. This seems like a good thing,
so clean up the warnings exposed thereby by labeling all such
cases with comments that gcc will recognize.
In files that already had one or more suitable comments, I generally
matched the existing style of those. Otherwise I went with
/* FALLTHROUGH */, which is one of the spellings approved at the
more-restrictive-than-default level -Wimplicit-fallthrough=4.
(At the default level you can also spell it /* FALL ?THRU */,
and it's not picky about case. What you can't do is include
additional text in the same comment, so some existing comments
containing versions of this aren't good enough.)
Testing with gcc 8.0.1 (Fedora 28's current version), I found that
I also had to put explicit "break"s after elog(ERROR) or ereport(ERROR);
apparently, for this purpose gcc doesn't recognize that those don't
return. That seems like possibly a gcc bug, but it's fine because
in most places we did that anyway; so this amounts to a visit from the
style police.
Discussion: https://postgr.es/m/15083.1525207729@sss.pgh.pa.us
Previously a tuple that has been moved to a different partition (see
f16241bef7), set the block number on the old tuple to an invalid
value to indicate that fact. But the tuple offset was left
untouched. That turned out to trigger a wal_consistency_checking
failure as reported by Peter Geoghegan, as the offset wasn't
always overwritten during WAL replay.
Heikki observed that we're wasting valuable data by not putting
information also in the offset. Thus set that to
MovedPartitionsOffsetNumber when a tuple indicates it has moved.
We continue to set the block number to MovedPartitionsBlockNumber, as
that seems more likely to cause problems for code not updated to know
about moved tuples.
As t_ctid's offset number is now always set, this refinement also
fixes the wal_consistency_checking issue.
This technically is a minor disk format break, with previously created
moved tuples not being recognized anymore. But since there not even
has been a beta release since f16241bef7c...
Reported-By: Peter Geoghegan
Author: Heikki Linnakangas, Amul Sul
Discussion: https://postgr.es/m/CAH2-Wzm9ty+1BX7-GMNJ=xPRg67oJTVeDNdA9LSyJJtMgRiCMA@mail.gmail.com
Without these fixes, changes to the inserted tuple made by remote
triggers are ignored when building local RETURNING tuples.
In the core code, call ExecInitRoutingInfo at a later point from
within ExecInitPartitionInfo so that the FDW callback gets invoked
after the returning list has been built. But move CheckValidResultRel
out of ExecInitRoutingInfo so that it can happen at an earlier stage.
In postgres_fdw, refactor assorted deparsing functions to work with
the RTE rather than the PlannerInfo, which saves us having to
construct a fake PlannerInfo in cases where we don't have a real one.
Then, we can pass down a constructed RTE that yields the correct
deparse result when no real one exists. Unfortunately, this
necessitates a hack that understands how the core code manages RT
indexes for update tuple routing, which is ugly, but we don't have a
better idea right now.
Original report, analysis, and patch by Etsuro Fujita. Heavily
refactored by me. Then worked over some more by Amit Langote.
Discussion: http://postgr.es/m/5AD4882B.10002@lab.ntt.co.jp
Revert the map/unmap dance I tried in commit 73042b8d1; that helps
not at all.
Instead, speculate that the unwanted allocation is being done on
another thread, and thus timing variations explain the apparent
unpredictability. Temporarily add a 1-second sleep before the
VirtualFree call, in hopes that any such other threads will
quiesce and not jog our elbow.
This is obviously not a desirable long-term fix, but as a means of
investigation it seems useful.
Discussion: https://postgr.es/m/25495.1524517820@sss.pgh.pa.us
The idea here is to get Windows' userspace infrastructure to allocate
whatever space it needs for MapViewOfFileEx() before we release the
locked-down space that we want to map the shared memory block into.
This is a fairly brute-force attempt, and would likely (for example)
fail with large shared memory on 32-bit Windows. We could perhaps
ameliorate that by mapping only part of the shared memory block in
this way, but for the moment I just want to see if this approach
will fix dory's problem.
Discussion: https://postgr.es/m/25495.1524517820@sss.pgh.pa.us
Rather than elog'ing immediately, push the map data into a preallocated
StringInfo. Perhaps this will prevent some of the mid-operation
allocations that are evidently happening now.
Discussion: https://postgr.es/m/25495.1524517820@sss.pgh.pa.us
The code previously undefined isnan because of a compiler warning on
MinGW. Since we now need to use isnan, we can't do that anymore.
We might need a different solution if the compiler warning is too
annoying.
When due to publication configuration, a TRUNCATE change ends up with
zero tables to be published, don't send the message out, just skip it.
It's not wrong, but obviously useless overhead.
This code is evidently allocating memory and thus confusing matters
even more. Let's see whether we can learn anything with
just VirtualQuery.
Discussion: https://postgr.es/m/25495.1524517820@sss.pgh.pa.us
This morning's results from buildfarm member dory make it pretty
clear that something is getting mapped into the just-freed space,
but not what that something is. Replace my minimalistic probes
with a full dump of the process address space and module space,
based on Noah's work at
<20170403065106.GA2624300%40tornado.leadboat.com>
This is all (probably) to get reverted once we have fixed the
problem, but for now we need information.
Discussion: https://postgr.es/m/25495.1524517820@sss.pgh.pa.us
While looking at a recent buildfarm failure in the ecpg tests, I wondered
why the pg_regress output claimed the stderr part of the test failed, when
the regression diffs were clearly for the stdout part. Looking into it,
the reason is that pg_regress.c's logic for iterating over three parallel
lists is wrong, and has been wrong since it was written: it advances the
"tag" pointer at a different place in the loop than the other two pointers.
Fix that.
After some thought about the info captured so far, it seems possible
that MapViewOfFileEx is itself causing some DLL to get loaded into
the space just freed by VirtualFree. The previous commit here didn't
capture enough info to really prove the case for that, so let's add
one more VirtualQuery in between those steps. Also, be sure to
capture the post-Map state before we emit any log entries, just in
case elog() is invoking some code not previously loaded.
Discussion: https://postgr.es/m/25495.1524517820@sss.pgh.pa.us
Buildfarm results show that the modern POSIX rule that 1 ^ NaN = 1 is not
honored on *BSD until relatively recently, and really old platforms don't
believe that NaN ^ 0 = 1 either. (This is unsurprising, perhaps, since
SUSv2 doesn't require either behavior.) In hopes of getting to platform
independent behavior, let's deal with all the NaN-input cases explicitly
in dpow().
Note that numeric_power() doesn't know either of these special cases.
But since that behavior is platform-independent, I think it should be
addressed separately, and probably not back-patched.
Discussion: https://postgr.es/m/75DB81BEEA95B445AE6D576A0A5C9E936A73E741@BPXM05GP.gisp.nec.co.jp
DST law changes in Palestine and Antarctica (Casey Station). Historical
corrections for Portugal and its colonies, as well as Enderbury, Jamaica,
Turks & Caicos Islands, and Uruguay.
Per spec, the result of power() should be NaN if either input is NaN.
It appears that on some versions of Windows, the libc function does
return NaN, but it also sets errno = EDOM, confusing our code that
attempts to work around shortcomings of other platforms. Hence, add
guard tests to avoid substituting a wrong result for the right one.
It's been like this for a long time (and the odd behavior only appears
in older MSVC releases, too) so back-patch to all supported branches.
Dang Minh Huong, reviewed by David Rowley
Discussion: https://postgr.es/m/75DB81BEEA95B445AE6D576A0A5C9E936A73E741@BPXM05GP.gisp.nec.co.jp
The point of this is not really to remove redundancy in pg_language.dat;
with only three entries, it's hardly worth it. Rather, it is to get
to a point where there are exactly zero hard-coded numeric pg_proc OID
references in the catalog .dat files. The lanvalidator column was the
only remaining location of such references, and it seems like a good
thing for future-proofing reasons to make it not be a special case.
There are still a few places in the .dat files with numeric OID references
to other catalogs, but after review I don't see any that seem worth
changing at present. In each case there are just too few entries to make
it worth the trouble to create lookup infrastructure.
This doesn't change the emitted postgres.bki file, so no catversion bump.
This change makes this module act more like most of our other low-level
resource management modules. It's a caller error if something is not
explicitly closed by the end of a successful transaction, so issue
a WARNING about it. This would not actually have caught the file leak
bug fixed in commit 231bcd080, because that was in a transaction-abort
path; but it still seems like a good, and pretty cheap, cross-check.
Discussion: https://postgr.es/m/152056616579.4966.583293218357089052@wrigleys.postgresql.org
Use the same code we already applied in duplicate_oids and unused_oids
to let this script find Catalog.pm without help. This removes the need
to supply a -I switch in most cases.
Also, mark the script executable, again to follow the precedent of
duplicate_oids and unused_oids. Now you can just do
"./reformat_dat_file.pl pg_proc.dat"
if you want to reformat only one or a few .dat files rather than all.
It'd be possible to remove the -I switches in the Makefile's convenience
targets, but I chose to leave them: they don't hurt anything, and it's
possible that in weird VPATH situations they might be of value.
I (tgl) originally coded the special case for pg_proc.pronargs as
though it were a kind of default value. It seems better though to
treat computable columns as an independent concern: this makes the
code clearer, and probably a bit faster too since we needn't do
work inside the per-column loop.
Improve related comments, as well, in the expectation that there
might be more cases like this in future.
John Naylor, some additional comment-hacking by me
Discussion: https://postgr.es/m/CAJVSVGW-D7OobzU=dybVT2JqZAx-4X1yvBJdavBmqQL05Q6CLw@mail.gmail.com
Apparently $(foreach ... $(call install_llvm_module,...)) doesn't work
too well without a blank line ending the install_llvm_module macro.
The previous coding hackishly dodged this problem with some parens,
but that's not really a good solution because make misunderstands
where the command boundaries are that way.
Discussion: https://postgr.es/m/20180428073935.GB1736@paquier.xyz
Don't put comments inside the macros, per complaint from Michael Paquier.
Quote target directory path with single quotes, not double; that seems
to be our project standard. Not quoting it at all definitely isn't
per standard.
Remove excess slash in one instance of path.
Remove useless semicolon.
Discussion: https://postgr.es/m/20180428073935.GB1736@paquier.xyz
Identify pg_replication_origin as a shared catalog in catalogs.sgml,
using the same boilerplate wording used for most other shared catalogs
(and tweak another place where someone had randomly deviated from
that boilerplate).
Make an example in mmgr/README more consistent with surrounding text.
Update an obsolete cross-reference in a comment in storage/block.h.
Zhuo Ql
Discussion: https://postgr.es/m/44296255.1819230.1524889719001@mail.yahoo.com
Add some debug printouts focused on the idea that MapViewOfFileEx might
be rounding its virtual memory allocation up more than we expect (and,
in particular, more than VirtualAllocEx does).
Once we've seen what this reports in one of the failures on buildfarm
members dory or jacana, we might revert this ... or perhaps just
decrease the log level.
Discussion: https://postgr.es/m/25495.1524517820@sss.pgh.pa.us
Commit b75f467b6e removed the LogicalTapeAssignReadBufferSize() function,
but forgot to update this comment. The read buffer size is an argument to
LogicalTapeRewindForRead() now. Doesn't seem worth going into the details
in the file header comment, so remove the outdated sentence altogether.
Update typedefs.list from current buildfarm results. Adjust pgindent's
typedef blacklist to block some more unfortunate typedef names that have
snuck in since last time. Manually tweak a few places where I didn't
like the initial results of pgindent'ing.
In the wake of commit 5602265f7, we were doing duplicate-OID detection
quite inefficiently, by invoking duplicate_oids which does all the same
parsing of catalog headers and .dat files as genbki.pl does. That adds
under half a second on modern machines, but quite a bit more on slow
buildfarm critters, so it seems worth avoiding. Let's just extend
genbki.pl a little so it can also detect duplicate OIDs, and remove
the duplicate_oids call from the build process.
(This also means that duplicate OID detection will happen during
Windows builds, which AFAICS it didn't before.)
This makes the use-case for duplicate_oids a bit dubious, but it's
possible that people will still want to run that check without doing
a whole build run, so let's keep that script.
In passing, move down genbki.pl's creation of its temp output files
so that it doesn't happen until after we've done parsing and validation
of the input. This avoids leaving a lot of clutter around after a
failure.
John Naylor and Tom Lane
Discussion: https://postgr.es/m/37D774E4-FE1F-437E-B3D2-593F314B7505@postgrespro.ru
Previously, you had to cd into src/include/catalog before running either
of these scripts. That's a bit tedious, so let's make the scripts do it
for you.
In passing, improve the initial comments in both scripts. Also remove
unused_oids' code to complain about duplicate oids. That was added in
yesterday's commit 5602265f7, but on second thought we shouldn't be
randomly redefining the script's behavior that way.
John Naylor and Tom Lane
Discussion: https://postgr.es/m/37D774E4-FE1F-437E-B3D2-593F314B7505@postgrespro.ru
The predecessor test boiled down to "PQserverVersion(NULL) >= 100000",
which is always false. No release includes that, so it could not have
reintroduced CVE-2018-1058. Back-patch to 9.4, like the addition of the
predecessor in commit 8d2814f274.
Discussion: https://postgr.es/m/20180422215551.GB2676194@rfd.leadboat.com
unused_oids was previously a shell script, which of course didn't work at
all on Windows. Also, commit 372728b0d introduced some other portability
problems, as complained of by Stas Kelvich. We can improve matters by
converting it to Perl.
While we're at it, let's future-proof both this script and duplicate_oids
to use Catalog.pm rather than having a bunch of ad-hoc logic for parsing
catalog headers and .dat files. These scripts are thereby a bit slower,
which doesn't seem like a problem for typical manual use. It is a little
annoying for buildfarm purposes, but we should be able to fix that case
by having genbki.pl make the check instead of parsing the headers twice.
(That's not done in this commit, though.)
Stas Kelvich, adjusted a bit by me
Discussion: https://postgr.es/m/37D774E4-FE1F-437E-B3D2-593F314B7505@postgrespro.ru
Instead of immediately constructing the string we need to emit into the
.BKI file, preserve the items we extracted from the header file in a hash.
This eases using the info for other purposes.
John Naylor (with cosmetic adjustments by me)
Discussion: https://postgr.es/m/37D774E4-FE1F-437E-B3D2-593F314B7505@postgrespro.ru
Commit 0927d2f46d didn't check that
consider_parallel was set for the target relation or account for
the possibility that required_outer might be non-empty.
To prevent future bugs of this ilk, add some assertions to
add_partial_path and do a bit of future-proofing of the code
recently added to recurse_set_operations.
Report by Andreas Seltenreich. Patch by Jeevan Chalke. Review
by Amit Kapila and by me.
Discussion: http://postgr.es/m/CAM2+6=U+9otsyF2fYB8x_2TBeHTR90itarqW=qAEjN-kHaC7kw@mail.gmail.com
Remove the words "if not already done." This obsolete wording
corresponds to an early development version of what became edd44738bc.
Author: Etsuro Fujita
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/5ADF117B.5030606@lab.ntt.co.jp
Instead of doing ExecInitExpr every time a Param needs to be evaluated
in run-time partition pruning, do it once during run-time pruning
set-up and cache the exprstate in PartitionPruneContext, saving a lot of
work.
Author: David Rowley
Reviewed-by: Amit Langote, Álvaro Herrera
Discussion: https://postgr.es/m/CAKJS1f8-x+q-90QAPDu_okhQBV4DPEtPz8CJ=m0940GyT4DA4w@mail.gmail.com
This controls both plan-time and execution-time new-style partition
pruning. While finer-grain control is possible (maybe using an enum GUC
instead of boolean), there doesn't seem to be much need for that.
This new parameter controls partition pruning for all queries:
trivially, SELECT queries that affect partitioned tables are naturally
under its control since they are using the new technology. However,
while UPDATE/DELETE queries do not use the new code, we make the new GUC
control their behavior also (stealing control from
constraint_exclusion), because it is more natural, and it leads to a
more natural transition to the future in which those queries will also
use the new pruning code.
Constraint exclusion still controls pruning for regular inheritance
situations (those not involving partitioned tables).
Author: David Rowley
Review: Amit Langote, Ashutosh Bapat, Justin Pryzby, David G. Johnston
Discussion: https://postgr.es/m/CAKJS1f_0HwsxJG9m+nzU+CizxSdGtfe6iF_ykPYBiYft302DCw@mail.gmail.com
Previously, you could partition by a boolean column as long as you
spelled the bound values as string literals, for instance FOR VALUES
IN ('t'). The trouble with this is that ruleutils.c printed that as
FOR VALUES IN (TRUE), which is reasonable syntax but wasn't accepted by
the grammar. That results in dump-and-reload failures for such cases.
Apply a minimal fix that just causes TRUE and FALSE to be converted to
strings 'true' and 'false'. This is pretty grotty, but it's too late for
a more principled fix in v11 (to say nothing of v10). We should revisit
the whole issue of how partition bound values are parsed for v12.
Amit Langote
Discussion: https://postgr.es/m/e05c5162-1103-7e37-d1ab-6de3e0afaf70@lab.ntt.co.jp
Set Emacs's perl-continued-statement-offset to match perltidy's
--continuation-indentation, which is 2 (not overridden in PostgreSQL's
profile) rather than the 4 that Emacs uses by default.
5c067521 erroneously had coded bms_prev_member assuming that a bitmapword
would always hold 32 bits and started it's search on what it thought was the
highest 8-bits of the word. This was not the case if bitmapwords were 64
bits.
In passing add a test to exercise this function a little. Previously there was
no coverage at all.
David Rowly
After introducing usage of t_tid of inner or page high key for storing
number of attributes of tuple, validation of tuple's ItemPointer with
ItemPointerIsValid becomes incorrect, it's need to validate only blocknumber of
ItemPointer. Missing this causes a incorrect page deletion, fix that. Test is
added.
BTW, current contrib/amcheck doesn't fail on index corrupted by this way.
Also introduce BTreeTupleGetTopParent/BTreeTupleSetTopParent macroses to improve
code readability and to avoid possible confusion with page high key: high key
is used to store top-parent link for branch to remove.
Bug found by Michael Paquier, but bug doesn't exist in previous versions because
t_tid was set to P_HIKEY.
Author: Teodor Sigaev
Reviewer: Peter Geoghegan
Discussion: https://www.postgresql.org/message-id/flat/20180419052436.GA16000%40paquier.xyz
Results from buildfarm member opossum suggest that this doesn't work
quite right on that platform. We've seen issues with NaN support on
MIPS/NetBSD before ... allegedly they fixed this stuff back in 2010,
but maybe only for small values of "fixed".
If, in fact, opossum fails this test then I plan to revert it;
it's mainly for diagnostic purposes rather than something we'd
necessarily keep long-term. I think that the failures in window.sql
could be worked around with some code duplication, but I want to
verify my theory about the cause first.
In commit f0e4475, GetIndexOpClass was renamed to ResolveOpClass, but
the comment in typecmds.c didn't get the memo.
In objectaddress.c, missing 'of' in a comment.
Both noticed by Vik Fearing, patch is mine though.
Since it sets up an event trigger that would fire on DDL done by any
concurrent test script, the original scheduling is just an invitation
to irreproducible test failures. (The fact that we found a bug through
exactly such irreproducible test failures doesn't really change the
calculus here: this script is a hazard to anything that runs in parallel
with it today or might be added to that parallel group in future. No,
I don't believe that the trigger is protecting itself sufficiently to
avoid all possible trouble.)
Discussion: https://postgr.es/m/5767.1523995174@sss.pgh.pa.us
EventTriggerTableRewrite crashed if there were table_rewrite triggers
present, but there had not been when the calling command started.
EventTriggerDDLCommandEnd called ddl_command_end triggers if present,
even if there had been no such triggers when the calling command started,
which would lead to a failure in pg_event_trigger_ddl_commands.
In both cases, fix by doing nothing; it's better to wait till the next
command when things will be properly initialized.
In passing, remove an elog(DEBUG1) call that might have seemed interesting
four years ago but surely isn't today.
We found this because of intermittent failures in the buildfarm. Thanks
to Alvaro Herrera and Andrew Gierth for analysis.
Back-patch to 9.5; some of this code exists before that, but the specific
hazards we need to guard against don't.
Discussion: https://postgr.es/m/5767.1523995174@sss.pgh.pa.us
On further reflection, commit e5d83995e didn't go far enough: pretty much
everywhere in the planner that examines a clause's is_pushed_down flag
ought to be changed to use the more complicated behavior where we also
check the clause's required_relids. Otherwise we could make incorrect
decisions about whether, say, a clause is safe to use as a hash clause.
Some (many?) of these places are safe as-is, either because they are
never reached while considering a parameterized path, or because there
are additional checks that would reject a pushed-down clause anyway.
However, it seems smarter to just code them all the same way rather
than rely on easily-broken reasoning of that sort.
In support of that, invent a new macro RINFO_IS_PUSHED_DOWN that should
be used in place of direct tests on the is_pushed_down flag.
Like the previous patch, back-patch to all supported branches.
Discussion: https://postgr.es/m/f8128b11-c5bf-3539-48cd-234178b2314d@proxel.se
Use the term "system catalog" rather than "system relation" in assorted
places where it's clearly referring to a table rather than, say, an
index. Use more natural word order in the header boilerplate, improve
some of the one-liner catalog descriptions, and fix assorted random
deviations from the normal boilerplate. All purely neatnik-ism, but
why not.
John Naylor, some additional cleanup by me
Discussion: https://postgr.es/m/CAJVSVGUeJmFB3h-NJ18P32NPa+kzC165nm7GSoGHfPaN80Wxcw@mail.gmail.com
In some cases a clause attached to an outer join can be pushed down into
the outer join's RHS even though the clause is not degenerate --- this
can happen if we choose to make a parameterized path for the RHS. If
the clause ends up attached to a lower outer join, we'd misclassify it
as being a "join filter" not a plain "filter" condition at that node,
leading to wrong query results.
To fix, teach extract_actual_join_clauses to examine each join clause's
required_relids, not just its is_pushed_down flag. (The latter now
seems vestigial, or at least in need of rethinking, but we won't do
anything so invasive as redefining it in a bug-fix patch.)
This has been wrong since we introduced parameterized paths in 9.2,
though it's evidently hard to hit given the lack of previous reports.
The test case used here involves a lateral function call, and I think
that a lateral reference may be required to get the planner to select
a broken plan; though I wouldn't swear to that. In any case, even if
LATERAL is needed to trigger the bug, it still affects all supported
branches, so back-patch to all.
Per report from Andreas Karlsson. Thanks to Andrew Gierth for
preliminary investigation.
Discussion: https://postgr.es/m/f8128b11-c5bf-3539-48cd-234178b2314d@proxel.se
I added this "optimization" on top of Amit Langote's 158b7bc6d7, but
the quick path is never taken because the partition uses a different
pg_type oid than its parent table (causing equalTupleDescs to return
false). Changing that requires more analysis and is too considered
dangerous at this point in the cycle, so revert it.
We might make it work someday, but not for pg11.
Discussion: https://postgr.es/m/825031be-942c-8c24-6163-13c27f217a3d@lab.ntt.co.jp
Amit Langote reported that partition prune was unable to work with
arrays, enums, etc, which led him to research the appropriate way to
match query clauses to partition keys: instead of searching for an exact
match of the expression's type, it is better to rely on the fact that
the expression qual has already been resolved to a specific operator,
and that the partition key is linked to a specific operator family.
With that info, it's possible to figure out the strategy and comparison
function to use for the pruning clause in a manner that works reliably
for pseudo-types also.
Include new test cases that demonstrate pruning where pseudotypes are
involved.
Author: Amit Langote, Álvaro Herrera
Discussion: https://postgr.es/m/2b02f1e9-9812-9c41-972d-517bdc0f815d@lab.ntt.co.jp
It appears that new fields introduced in 857f9c36 have inconsistent datatypes:
BTMetaPageData.btm_last_cleanup_num_heap_tuples is of float4 type,
while xl_btree_metadata.last_cleanup_num_heap_tuples is of double type.
IndexVacuumInfo.num_heap_tuples, which is a source of values for
both former fields is of double type. So, make both those fields in
BTMetaPageData and xl_btree_metadata use float8 type in order to match the
precision of the source. That shouldn't be double type, because we always
use types with explicit width in WAL.
Patch introduces incompatibility of on-disk format since 857f9c36 commit, but
that versions never was released, so just bump catalog version to avoid
possible confusion.
Author: Alexander Korortkov
Remove an obsolete reference to the 'afteritem' argument, which was
removed by commit bc292937. Add a comment that clarifies how
_bt_insertonpg() indirectly handles the insertion of high key items.
Author: Peter Geoghegan
New WAL record XLOG_BTREE_META_CLEANUP introduced in 857f9c36 has no handling
in btree_desc() and btree_identify(). This patch implements corresponding
handling.
Alexander Korotkov
Add several assertions that ensure that we're dealing with a pivot tuple
without non-key attributes where that's expected. Also, remove the
assertion within _bt_isequal(), restoring the v10 function signature. A
similar check will be performed for the page highkey within
_bt_moveright() in most cases. Also avoid dropping all objects within
regression tests, to increase pg_dump test coverage for INCLUDE indexes.
Rather than using infrastructure that's generally intended to be used
with reference counted heap tuple descriptors during truncation, use the
same function that was introduced to store flat TupleDescs in shared
memory (we use a temp palloc'd buffer). This isn't strictly necessary,
but seems more future-proof than the old approach. It also lets us
avoid including rel.h within indextuple.c, which was arguably a
modularity violation. Also, we now call index_deform_tuple() with the
truncated TupleDesc, not the source TupleDesc, since that's more robust,
and saves a few cycles.
In passing, fix a memory leak by pfree'ing truncated pivot tuple memory
during CREATE INDEX. Also pfree during a page split, just to be
consistent.
Refactor _bt_check_natts() to be more readable.
Author: Peter Geoghegan with some editorization by me
Reviewed by: Alexander Korotkov, Teodor Sigaev
Discussion: https://www.postgresql.org/message-id/CAH2-Wz%3DkCWuXeMrBCopC-tFs3FbiVxQNjjgNKdG2sHxZ5k2y3w%40mail.gmail.com
Clean up error messages relating to mistakes in .dat files: make sure they
provide the .dat file name and line number, not the place in the Perl
script that's reporting the problem. Adopt more uniform message phrasing,
too.
Make genbki.pl spit up on unrecognized field names in the input hashes.
Previously, it just silently ignored such fields, which could make a
misspelled field name into a very hard-to-decipher problem. (This is in
genbki.pl, *not* Catalog.pm, because we don't want reformat_dat_file.pl to
complain about unrecognized fields. We'd rather it silently dropped them,
to facilitate removing unwanted fields after a reorganization.)
Commit 54eff5311 did not account for the possibility that we'd have
a transaction snapshot due to default_transaction_isolation being
set high enough to require one. The transaction snapshot is enough
to hold back our advertised xmin and thus risk deadlock anyway.
The only way to get rid of that snap is to start a new transaction,
so let's do that instead. Also throw in an assert checking that we
really have gotten to a state where no xmin is being advertised.
Back-patch to 9.4, like the previous commit.
Discussion: https://postgr.es/m/CAMkU=1ztk3TpQdcUNbxq93pc80FrXUjpDWLGMeVBDx71GHNwZQ@mail.gmail.com
Change things around so that proper quoting of values interpolated into
the BKI data by initdb is the responsibility of initdb, not something
we half-heartedly handle by putting double quotes into the raw BKI data.
(Note: experimentation shows that it still doesn't work to put a double
quote into the initial superuser username, but that's the fault of
inadequate quoting while interpolating the name into SQL scripts;
the BKI aspect of it works fine now.)
Having done that, we can remove the special-case handling of values
that look like "something" from genbki.pl, and instead teach it to
escape double --- and single --- quotes properly. This removes the
nowhere-documented need to treat those specially in the BKI source
data; whatever you write will be passed through unchanged into the
inserted data value, modulo Perl's rules about single-quoted strings.
Add documentation explaining the (pre-existing) handling of backslashes
in the BKI data.
Per an earlier discussion with John Naylor.
Discussion: https://postgr.es/m/CAJVSVGUNao=-Q2-vAN3PYcdF5tnL5JAHwGwzZGuYHtq+Mk_9ng@mail.gmail.com
Formerly, Catalog.pm turned a C array type declaration in the catalog
header files into a SQL type, e.g., 'foo[]'. Along the way, genbki.pl
turned this into '_foo' for the purpose of type lookups, but wrote 'foo[]'
to postgres.bki. During bootstrap, bootscanner.l had to have a special
case rule to tokenize this, and then MapArrayTypeName() would turn 'foo[]'
into '_foo' one more time.
This seems unnecessarily complicated, especially since nobody cares that
much about the readability of postgres.bki. Instead, make Catalog.pm
convert the C declaration into '_foo' to start with, and preserve that
representation of the type name throughout bootstrap data processing.
Then rip out the special-case code in bootscanner.l and bootstrap.c.
This changes postgres.bki to the extent that array fields are now
declared like
proconfig = _text ,
rather than
proconfig = text[] ,
No documentation update, since the SGML docs didn't mention any of this
in the first place, and it's all pretty transparent to writers of
catalog header files anyway.
John Naylor
Discussion: https://postgr.es/m/CAJVSVGUNao=-Q2-vAN3PYcdF5tnL5JAHwGwzZGuYHtq+Mk_9ng@mail.gmail.com
During the bootstrap data format conversion, it seemed important for
verifiability's sake that the generated postgres.bki file stayed the same
as before. That resulted in adding a bunch of ad-hoc rules about when to
quote emitted data values, to match previous manual decisions that had
often quoted values unnecessarily. Now that the conversion is complete,
it seems fine to remove all those ad-hoc rules. The net actual effect on
the current contents of postgres.bki is that some fields that had been
quoted despite containing only digits or only "-" lose their unnecessary
quotes.
Also, now that genbki.pl will always quote values containing a backslash,
there's no need for bootscanner.l to allow unquoted octal escapes;
so simplify its production for "id" by removing that possibility.
John Naylor, slightly modified by me
Discussion: https://postgr.es/m/CAJVSVGUNao=-Q2-vAN3PYcdF5tnL5JAHwGwzZGuYHtq+Mk_9ng@mail.gmail.com
Review of commit 1eb6d652: It's pointless to add padding to the GID fields,
when the code that follows assumes that there is no alignment, and uses
memcpy(). Remove the pointless padding.
Update comments to note the new fields in the WAL records.
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/33b787bf-dc20-1161-54e9-3f3b607bf59d%40iki.fi
It turns out that after runtime partition pruning, Append's
first_partial_plan does not accurately represent partial plans to run,
if any of those got pruned. This could limit participation of workers
in some partial subplans, if other subplans got pruned. Fix it by
keeping an index of the first valid partial subplan in the state node,
determined at execnode Init time.
Author: David Rowley, with cosmetic changes by me.
Discussion: https://postgr.es/m/CAKJS1f8o2Yd=rOP=Et3A0FWgF+gSAOkFSU6eNhnGzTPV7nN8sQ@mail.gmail.com
coverage report indicated that mark_invalid_subplans_as_finished() and
nearby code was not getting exercised by any tests. Add a new one which
has execution-time Params rather than only external Params to fix this.
In passing, David noticed that ab_q6 tests were not actually required to
have a generic plan. The tests were testing exec Params not external
Params, so there was no need for the PREPARE. Remove the PREPARE,
making these plain queries. (The new queries are called from
explain_parallel_append, which may be unnecessary since they don't
actually have a Parallel Append node, just an Append. But it doesn't
seem to hurt anything, either.)
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f--hopb6JBSDY4wiXTS3ZcDp-wparXjTQ1nzNdBa04Fog@mail.gmail.com
This reverts commit 4d0f6d3f20 ("Attempt to stabilize partition_prune
test output (2)"), and attempts to stabilize the test by using string
replacement to hide any loop count difference in parallel nodes.
Discussion: https://postgr.es/m/4475.1523628300@sss.pgh.pa.us
spg_text_leaf_consistent() supposed that it should compare only
Min(querylen, entrylen) bytes of the two strings, and then deal with
any excess bytes in one string or the other by assuming the longer
string is greater if the prefixes are equal. Quite aside from the
fact that that's just wrong in some locales (e.g., 'ch' is not less
than 'd' in cs_CZ), it also risked passing incomplete multibyte
characters to strcoll(), with ensuing bad results.
Instead, just pass the full strings to varstr_cmp, and let it decide
what to do about unequal-length strings.
Fortunately, this error doesn't imply any index corruption, it's just
that searches might return the wrong set of entries.
Per report from Emre Hasegeli, though this is not his patch.
Thanks to Peter Geoghegan for review and discussion.
This code was born broken, so back-patch to all supported branches.
In HEAD, I failed to resist the temptation to do a bit of cosmetic
cleanup/pgindent'ing on 710d90da1, too.
Discussion: https://postgr.es/m/CAE2gYzzb6K51VnTq5i5p52z+j9p2duEa-K1T3RrC_GQEynAKEg@mail.gmail.com
We had an Assert() preventing whole-row expressions from being used in
the SET clause of INSERT ON CONFLICT, but it seems unnecessary, given
some tests, so remove it. Add a new test to exercise the case.
Still at ExecInitPartitionInfo, we used map_partition_varattnos (which
constructs an attribute map, then calls map_variable_attnos) using
the same two relations many times in different expressions and with
different parameters. Constructing the map over and over is a waste.
To avoid this repeated work, construct the map once, and use
map_variable_attnos() directly instead.
Author: Amit Langote, per comments by me (Álvaro)
Discussion: https://postgr.es/m/20180326142016.m4st5e34chrzrknk@alvherre.pgsql
Coverity complained about the lack of a check on the return value in
parse_jsonb_index_flags' last call of JsonbIteratorNext. Seems like
a reasonable gripe to me, especially since the code is depending on
that being WJB_DONE to not leak memory, so add a check.
In passing, improve a couple other places where the result was being
ignored, either by adding an assert or at least a cast to void.
Also, don't spell "WJB_DONE" as "0". That's horrid coding style,
and it wasn't consistent either.
Teach both base backups and pg_verify_checksums that if a page is new,
it does not have a checksum yet, so it shouldn't be verified.
Noted by Tomas Vondra, review by David Steele.
This option makes no sense when the cluster checksum state cannot be
changed, and should have been removed in the revert.
Author: Daniel Gustafsson
Review: Michael Paquier
In the wake of commit 50c6bb022, it's not necessary for ApplyRetrieveRule
to have a forUpdatePushedDown parameter. By the time control gets here for
any given view-referencing RTE, we should already have pushed down the
effects of any FOR UPDATE/SHARE clauses affecting the view from outer query
levels. Hence if we don't find a RowMarkClause at the current query level,
that's sufficient proof that there is no outer one either. This in turn
means we need no forUpdatePushedDown parameter for fireRIRrules.
I wonder whether we oughtn't also revert commit cba2d2717, since it now
seems likely that that was band-aiding around the bad effects of doing
FOR UPDATE pushdown and view expansion in the wrong order. However,
in the absence of evidence that the current coding of markQueryForLocking
is actually buggy (i.e. missing RTEs it ought to mark), it seems best to
leave it alone.
Discussion: https://postgr.es/m/24db7b8f-3de5-e25f-7ab9-d8848351d42c@gmail.com
I was dissatisfied with the code coverage report for expand_tuple() in the
wake of commit 7c44c46de: while better than no coverage at all, it was
still not exercising the core function of inserting out-of-line default
values, nor was the HeapTuple-output path covered. So far as I can find,
the only code path that reaches the latter at present is EvalPlanQual
fetches for non-locked tables. Hence, extend eval-plan-qual.spec to
test cases where out-of-line defaults must be inserted into a tuple
fetched from a non-locked table.
Discussion: https://postgr.es/m/87woxi24uw.fsf@ansel.ydns.eu
SELECT FOR UPDATE on a view should require UPDATE (as well as SELECT)
permissions on the view, and then the view's owner needs those same
permissions against the relations it references, and so on all the way
down to base tables. But ApplyRetrieveRule did things in the wrong order,
resulting in failure to mark intermediate view levels as needing UPDATE
permission. Thus for example, if user A creates a table T and an updatable
view V1 on T, then grants only SELECT permissions on V1 to user B, B could
create a second view V2 on V1 and then would be allowed to perform SELECT
FOR UPDATE via V2 (since V1 wouldn't be checked for UPDATE permissions).
To fix, just switch the order of expanding sub-views and marking referenced
objects as needing UPDATE permission. I think additional simplifications
are now possible, but that's distinct from the bug fix proper.
This is certainly a security issue, but the consequences are pretty minor
(just the ability to lock rows that shouldn't be lockable). Against that
we have a small risk of breaking applications that are working as-desired,
since nested views have behaved this way since such cases worked at all.
On balance I'm inclined not to back-patch.
Per report from Alexander Lakhin.
Discussion: https://postgr.es/m/24db7b8f-3de5-e25f-7ab9-d8848351d42c@gmail.com
MaxIndexTuplesPerPage ignores the fact that btree indexes sometimes
store tuples with no data payload. But it also ignores the possibility
of "special space" on index pages, which offsets that, so that the
result isn't an underestimate. This all seems worth documenting, though.
In passing, remove #define MinIndexTupleSize, which was added by
commit 2c03216d8 but not used in that commit nor later ones.
Comment text by me; issue noticed by Peter Geoghegan.
Discussion: https://postgr.es/m/CAH2-WzkQmb54Kbx-YHXstRKXcNc+_87jwV3DRb54xcybLR7Oig@mail.gmail.com
We need to call expand_function_arguments() to expand named and default
arguments.
In PL/pgSQL, we also need to deal with named and default INOUT arguments
when receiving the output values into variables.
Author: Pavel Stehule <pavel.stehule@gmail.com>
Commit 16828d5c forgot to check that it had a set of missing values
before trying to retrieve a value from it.
An additional query to add coverage for this code is added to the
regression test.
Per bug report from Andreas Seltenreich.
In passing, throw an error if the AF count is too small, rather than
just silently discarding extra affix entries.
Note that the new regression test cases require installing the
updated src/backend/tsearch/dicts files.
Arthur Zakirov
Discussion: https://postgr.es/m/20180413113447.GA32474@zakirov.localdomain
We'd throw away the partial result anyway after parsing the error message.
Throwing it away beforehand costs nothing and reduces the risk of
out-of-memory failure. Also, at least in systems that behave like
glibc/Linux, if the partial result was very large then the error PGresult
would get allocated at high heap addresses, preventing the heap storage
used by the partial result from being released to the OS until the error
PGresult is freed.
In psql >= 9.6, we hold onto the error PGresult until another error is
received (for \errverbose), so that this behavior causes a seeming
memory leak to persist for awhile, as in a recent complaint from
Darafei Praliaskouski. This is a potential performance regression from
older versions, justifying back-patching at least that far. But similar
behavior may occur in other client applications, so it seems worth just
back-patching to all supported branches.
Discussion: https://postgr.es/m/CAC8Q8tJ=7cOkPePyAbJE_Pf691t8nDFhJp0KZxHvnq_uicfyVg@mail.gmail.com
This custom opclass was already in use in other tests -- defined
independently in every such file. Move the definition to the earliest
test that uses it, and keep it around so that later tests can reuse it.
Use it in the tests for pruning of hash partitioning, and since this
makes the second expected file unnecessary, put those tests back in
partition_prune.sql whence they sprang.
Author: Amit Langote
Discussion: https://postgr.es/m/CA%2BTgmoZ0D5kJbt8eKXtvVdvTcGGWn6ehWCRSZbWytD-uzH92mQ%40mail.gmail.com
NISortAffixes() compared successive compound affixes incorrectly,
thus possibly failing to merge identical affixes, or (less likely)
merging ones that shouldn't be merged. The user-visible effects
of this are unclear, to me anyway.
Per bug #15150 from Alexander Lakhin. It's been broken for a long time,
so back-patch to all supported branches.
Arthur Zakirov
Discussion: https://postgr.es/m/152353327780.31225.13445405496721177988@wrigleys.postgresql.org
We were using CurrentMemoryContext to put the partsupfunc fmgr_info
into, which isn't right, because we want the PartitionKey as a whole to
be in the isolated Relation->rd_partkeycxt context. This can cause a
crash with user-defined support functions in the operator classes used
by partitioning keys. (Maybe this can cause problems with core-supplied
opclasses too, not sure.)
This is demonstrably broken in Postgres 10, too, but the initial
proposed fix runs afoul of a problem discussed back when 8a0596cb65
("Get rid of copy_partition_key") reorganized that code: namely that it
is possible to jump out of RelationBuildPartitionKey because of some
error and leave a dangling memory context child of CacheMemoryContext.
Also, while reviewing this I noticed that the removed-in-pg11
copy_partition_key was doing something wrong, unfixed in pg10, namely
doing memcpy() on the FmgrInfo, which is bogus (should be doing
fmgr_info_copy). Therefore, in branch pg10, the sane fix seems to be to
backpatch both the aforementioned 8a0596cb65 and its followup
be2343221f ("Protect against hypothetical memory leaks in
RelationGetPartitionKey"), so do that, then apply the fmgr_info memcxt
bugfix on top.
Add a test case exercising btree-based custom operator classes, which
causes a crash prior to this fix. This is not a security problem,
because in order to create an operator class you need superuser
privileges anyway.
Authors: Álvaro Herrera and Amit Langote
Reported and diagnosed by: Amit Langote
Discussion: https://postgr.es/m/3041e853-b1dd-a0c6-ff21-7cc5633bffd0@lab.ntt.co.jp
- Explicitly forbids opclass, collation and indoptions (like DESC/ASC etc) for
including columns. Throw an error if user points that.
- Truncated storage arrays for such attributes to store only key atrributes,
added assertion checks.
- Do not check opfamily and collation for including columns in
CompareIndexInfo()
Discussion: https://www.postgresql.org/message-id/5ee72852-3c4e-ee35-e2ed-c1d053d45c08@sigaev.ru
This reverts commits d204ef6377,
83454e3c2b and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
Oversight in commit 8b08f7d482: pg_class.relispartition was not
being set for index partitions, which is a bit odd, and was also causing
the code to unnecessarily call has_superclass() when simply checking the
flag was enough.
Author: Álvaro Herrera
Reported-by: Amit Langote
Discussion: https://postgr.es/m/12085bc4-0bc6-0f3a-4c43-57fe0681772b@lab.ntt.co.jp
The nextOid value is from the start of the checkpoint and may well be stale
compared to values from more recent XLOG_NEXTOID records. Previously, we
adopted it anyway, allowing the OID counter to go backwards during a crash.
While this should be harmless, it contributed to the severity of the bug
fixed in commit 0408e1ed5, by allowing duplicate TOAST OIDs to be assigned
immediately following a crash. Without this error, that issue would only
have arisen when TOAST objects just younger than a multiple of 2^32 OIDs
were deleted and then not vacuumed in time to avoid a conflict.
Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdOgWT2hHkYG3Wwo2cyZJq2zfs1FH0FgX-=h4OLosXHf9w@mail.gmail.com
When selecting a new OID, we take care to avoid picking one that's already
in use in the target table, so as not to create duplicates after the OID
counter has wrapped around. However, up to now we used SnapshotDirty when
scanning for pre-existing entries. That ignores committed-dead rows, so
that we could select an OID matching a deleted-but-not-yet-vacuumed row.
While that mostly worked, it has two problems:
* If recently deleted, the dead row might still be visible to MVCC
snapshots, creating a risk for duplicate OIDs when examining the catalogs
within our own transaction. Such duplication couldn't be visible outside
the object-creating transaction, though, and we've heard few if any field
reports corresponding to such a symptom.
* When selecting a TOAST OID, deleted toast rows definitely *are* visible
to SnapshotToast, and will remain so until vacuumed away. This leads to
a conflict that will manifest in errors like "unexpected chunk number 0
(expected 1) for toast value nnnnn". We've been seeing reports of such
errors from the field for years, but the cause was unclear before.
The fix is simple: just use SnapshotAny to search for conflicting rows.
This results in a slightly longer window before object OIDs can be
recycled, but that seems unlikely to create any large problems.
Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdOgWT2hHkYG3Wwo2cyZJq2zfs1FH0FgX-=h4OLosXHf9w@mail.gmail.com
This fixes a bug whereby the st_appname, st_clienthostname, and
st_activity_raw fields for auxiliary processes point beyond the end of
their respective shared memory segments. As a result, the application_name
of a backend might show up as the client hostname of an auxiliary process.
Backpatch to v10, where this bug was introduced, when the auxiliary
processes were added to the array.
Author: Edmund Horner
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAMyN-kA7aOJzBmrYFdXcc7Z0NmW%2B5jBaf_m%3D_-77uRNyKC9r%3DA%40mail.gmail.com
The other strings, application_name and query string, were snapshotted to
local memory in pgstat_read_current_status(), but we forgot to do that for
client hostnames. As a result, the client hostname would appear to change in
the local copy, if the client disconnected.
Backpatch to all supported versions.
Author: Edmund Horner
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAMyN-kA7aOJzBmrYFdXcc7Z0NmW%2B5jBaf_m%3D_-77uRNyKC9r%3DA%40mail.gmail.com
If the table being attached contained values that contradict the default
partition's partition constraint, it would fail to complain, because
CommandCounterIncrement changes in 4dba331cb3 coupled with some bogus
coding in the existing ValidatePartitionConstraints prevented the
partition constraint from being validated after all -- or rather, it
caused to constraint to become an empty one, always succeeding.
Fix by not re-reading the OID of the default partition in
ATExecAttachPartition. To forestall similar problems, revise the
existing code:
* rename routine from ValidatePartitionConstraints() to
QueuePartitionConstraintValidation, to better represent what it
actually does.
* add an Assert() to make sure that when queueing a constraint for a
partition we're not overwriting a constraint previously queued.
* add an Assert() that we don't try to invoke the special-purpose
validation of the default partition when attaching the default
partition itself.
While at it, change some loops to obtain partition OIDs from
partdesc->oids rather than find_all_inheritors; reduce the lock level
of partitions being scanned from AccessExclusiveLock to ShareLock;
rewrite QueuePartitionConstraintValidation in a recursive fashion rather
than repetitive.
Author: Álvaro Herrera. Tests written by Amit Langote
Reported-by: Rushabh Lathia
Diagnosed-by: Kyotaro HORIGUCHI, who also provided the initial fix.
Reviewed-by: Kyotaro HORIGUCHI, Amit Langote, Jeevan Ladhe
Discussion: https://postgr.es/m/CAGPqQf0W+v-Ci_qNV_5R3A=Z9LsK4+jO7LzgddRncpp_rrnJqQ@mail.gmail.com
The MAKELEVEL hack to prevent submake-generated-headers from doing
anything in child make runs means that we have to explicitly invoke
it at top level for "make check", too, in case somebody proceeds
directly to that without an explicit "make all". (I think this
usage had parallel-make hazards even before the addition of more
generated headers; but it was totally broken as of 3b8f6e75f.)
Out of paranoia, force the submake-libpq target to depend on
submake-generated-headers, too. This seems to not be absolutely
necessary today, but it's not really saving us anything to omit
the ordering dependency, and it'll likely break someday without it.
Discussion: https://postgr.es/m/20180411103930.GB31461@momjian.us
The bug is caused due to the original IndexStmt that DefineIndex receives
being overwritten when processing the INCLUDE columns. Use separate list of
index params to propagate to child tables. Add tests covering this case.
Amit Langote and Alexander Korotkov.
One improbable error-exit path in this function used close() where
it should have used CloseTransientFile(). This is unlikely to be
hit in the field, and I think the consequences wouldn't be awful
(just an elog(LOG) bleat later). But a bug is a bug, so back-patch
to 9.4 where this code came in.
Pan Bian
Discussion: https://postgr.es/m/152056616579.4966.583293218357089052@wrigleys.postgresql.org
This optimization was introduced in commit 2b272734. The changes include
some additional comments and documentation, and also these more
substantive changes:
. ensure the optimization is only applied on the leaf node of a tree
whose root is on level 2 or more. It's of little value on small trees.
. Delay calling RelationSetTargetBlock() until after the critical
section of _bt_insertonpg
. ensure the optimization is also applied to unlogged tables.
Pavan Deolasee and Peter Geoghegan with some very light editing from me.
Discussion: https://postgr.es/m/CABOikdO8jhRarNC60nZLktZYhxt+TK8z_V97+Ny499YQdyAfug@mail.gmail.com
I'd hoped that commit 3b8f6e75f was sufficient to ensure parallel safety
even when a build started in a subdirectory requires rebuilding of
generated headers. This isn't so, because making submake-generated-headers
a prerequisite of "all" isn't enough to ensure it's completed before
starting on "all"'s other prerequisites. The explicit dependencies we put
on the recursive make targets ensure safe ordering before we recurse into
child directories, but they don't protect targets to be made in the current
directory. Hence, put back some ordering dependencies in directories that
we've traditionally expected to be starting points for "standalone" builds,
to wit src/pl/plpython and src/test/regress. (The former needs this in
order to minimize the work involved in building for both python 2 and
python 3; the latter to support packagings that make the regression tests
available for out-of-build-tree execution.) Adjust some other dependencies
so that these two cases work correctly even at high -j settings.
I'm not terribly happy with this partial solution, but I don't see a
way to do better without massive makefile restructuring, which we surely
aren't doing at this point in the development cycle. In any case, it's
little if any worse than what we had in prior releases.
Discussion: https://postgr.es/m/1523353963.8169.26.camel@gunduz.org
The HeapFetches counter was using a simple value in IndexOnlyScanState,
which fails to propagate values from parallel workers; so the counts are
wrong when IndexOnlyScan runs in parallel. Move it to Instrumentation,
like all the other counters.
While at it, change INSERT ON CONFLICT conflicting tuple counter to use
the new ntuples2 instead of nfiltered2, which is a blatant misuse.
Discussion: https://postgr.es/m/20180409215851.idwc75ct2bzi6tea@alvherre.pgsql
Per Julien Rouhaud and the buildfarm. This is not quite Julien's
patch: there's no need to lobotomize this build rule when building
contrib modules in-tree, so set NO_GENERATED_HEADERS only if PGXS.
In passing, also set NO_TEMP_INSTALL in external builds. This doesn't
seem to be fixing any live bug, because "make check" in an external
build just produces the expected error message without first trying to
make a temp install ... but it's far from obvious why it doesn't, so
this change seems like good future-proofing.
Julien Rouhaud and Tom Lane
Discussion: https://postgr.es/m/CAOBaU_YH=g68opbbMk8is3jNwhoXGa8ckRSre1nx0Obe1C7i-Q@mail.gmail.com
The comment earlier in the function correctly states "and the insertion
key is strictly greater than the first key in this page". That is what
we check here, not "greater than or equal".
Commit 372728b0d created some problems for usages like building a
subdirectory without having first done "make all" at the top level,
or for proceeding directly to "make install" without "make all".
The only reasonably clean way to fix this seems to be to force the
submake-generated-headers rule to fire in *any* "make all" or "make
install" command anywhere in the tree. To avoid lots of redundant work,
as well as parallel make jobs possibly clobbering each others' output, we
still need to be sure that the rule fires only once in a recursive build.
For that, adopt the same MAKELEVEL hack previously used for "temp-install".
But try to document it a bit better.
The submake-errcodes mechanism previously used in src/port/ and src/common/
is subsumed by this, so we can get rid of those special cases. It was
inadequate for src/common/ anyway after the aforesaid commit, and it always
risked parallel attempts to build errcodes.h.
Discussion: https://postgr.es/m/E1f5FAB-0006LU-MB@gemulon.postgresql.org
In 499be013de support for pruning unneeded Append subnodes was added.
The logic in that commit was not correctly checking if the next subplan
was in fact a valid subplan. This could cause parallel workers processes
to be given a subplan to work on which didn't require any work.
Per code review following an otherwise unexplained regression failure in
buildfarm member Pademelon. (We haven't been able to reproduce the
failure, so this is a bit of a blind fix in terms of whether it'll
actually fix it; but it is a clear bug nonetheless).
In passing, also add a comment to explain what first_partial_plan means.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f_E5r05hHUVG3UmCQJ49DGKKHtN=SHybD44LdzBn+CJng@mail.gmail.com
Previously a warning was printed, but the tool actually kept running
even when running as root. This is something we definitely want to
prevent, but since this means a behavior change, not backpatching.
Author: Michael Paquier
Make these scripts emit just one log message when they run, not one
per output file. The latter is way too verbose in the wake of
commit 372728b0d. The specific wording used is what already existed
in the MSVC scripts.
John Naylor
Discussion: https://postgr.es/m/11103.1523208822@sss.pgh.pa.us
In its original form, reformat_dat_file.pl smashed consecutive blank
lines to a single blank line, which was helpful for mopping up excess
whitespace during the bootstrap data format conversion. But going
forward, there seems little reason to do that; if developers want to
put in multiple blank lines, let 'em. This makes it conform to the
documentation I (tgl) wrote, too.
In passing, clean up some sloppy markup choices in bki.sgml.
John Naylor
Discussion: https://postgr.es/m/28827.1523039259@sss.pgh.pa.us
In commit 9c0a0de4c, I'd failed to notice that catalog/catalog.h
should also be considered a frontend-unsafe header, because it includes
(and needs) the full form of pg_class.h, not to mention relcache.h.
However, various frontend code was depending on it to get
TABLESPACE_VERSION_DIRECTORY, so refactoring of some sort is called for.
The cleanest answer seems to be to move TABLESPACE_VERSION_DIRECTORY,
as well as the OIDCHARS symbol, to common/relpath.h. Do that, and mop up
inclusions as necessary. (I found that quite a few current users of
catalog/catalog.h don't seem to need it at all anymore, apparently as a
result of the refactorings that created common/relpath.[hc]. And
initdb.c needed it only as a route to pg_class_d.h.)
Discussion: https://postgr.es/m/6629.1523294509@sss.pgh.pa.us
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
We were initializing a BMS to merely reference an existing one, which
would cause a double-free (and a crash) when the recursive algorithm
tried to intersect it with an empty one. Fix it by creating a copy at
initialization time.
Reported-by: sqlsmith (by way of Andreas Seltenreich)
Author: Amit Langote
Discussion: https://postgr.es/m/87in923lyw.fsf@ansel.ydns.eu
CheckIndexCompatible() misused ComputeIndexAttrs() by not bothering
to fill ii_NumIndexAttrs and ii_NumIndexKeyAttrs in the passed
IndexInfo. Omission of ii_NumIndexAttrs was previously unimportant,
but now this matters because ComputeIndexAttrs depends on
ii_NumIndexKeyAttrs to decide how many columns it needs to report on.
(BTW, the fact that this oversight wasn't detected earlier implies
that we have no regression test verifying whether CheckIndexCompatible
ever succeeds. Bad dog. Not the job of this patch to fix it, though.)
Also, change the API of ComputeIndexAttrs so that it fills the opclass
output array for all column positions, as it does for the options output
array; positions for non-key index columns are filled with zeroes.
This isn't directly fixing any bug, but it seems like a good idea.
Per valgrind failure reports from buildfarm.
Alexander Korotkov, tweaked a bit by me
Discussion: https://postgr.es/m/CAPpHfduWrysrT-qAhn+3Ea5+Mg6Vhc-oA6o2Z-hRCPRdvf3tiw@mail.gmail.com
Write ',' and ';' for typdelim values instead of the obscurantist
ASCII octal equivalents. Not sure why anybody ever thought the
latter were better; maybe it had something to do with lack of
a better quoting convention, twenty-plus years ago?
Reassign a couple of high-numbered OIDs that were left in during
yesterday's mad rush to commit stuff of uncertain internal
temperature.
The latter requires a catversion bump, though the former wouldn't
since the end-result catalog data is unchanged.
Addition of the catalog/pg_foo_d.h headers seems to have pushed us over
the brink of the maximum command line length for some older platforms
during "make install" for our header files. The main culprit here is
repetition of the target directory path, which could be long.
Rearrange so that we don't repeat that once per file, but only once
per subdirectory.
Per buildfarm.
Discussion: https://postgr.es/m/E1f5Dwm-0004n5-7O@gemulon.postgresql.org
Traditionally, include/catalog/pg_foo.h contains extern declarations
for functions in backend/catalog/pg_foo.c, in addition to its function
as the authoritative definition of the pg_foo catalog's rowtype.
In some cases, we'd been forced to split out those extern declarations
into separate pg_foo_fn.h headers so that the catalog definitions
could be #include'd by frontend code. That problem is gone as of
commit 9c0a0de4c, so let's undo the splits to make things less
confusing.
Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us
Everything of use to frontend code should now appear in the _d.h files,
and making this change frees us from needing to worry about whether the
catalog header files proper are frontend-safe.
Remove src/interfaces/ecpg/ecpglib/pg_type.h entirely, as the previous
commit reduced it to a confusingly-named wrapper around pg_type_d.h.
In passing, make test_rls_hooks.c follow project convention of including
our own files with #include "" not <>.
Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us
Historically, the initial catalog data to be installed during bootstrap
has been written in DATA() lines in the catalog header files. This had
lots of disadvantages: the format was badly underdocumented, it was
very difficult to edit the data in any mechanized way, and due to the
lack of any abstraction the data was verbose, hard to read/understand,
and easy to get wrong.
Hence, move this data into separate ".dat" files and represent it in a way
that can easily be read and rewritten by Perl scripts. The new format is
essentially "key => value" for each column; while it's a bit repetitive,
explicit labeling of each value makes the data far more readable and less
error-prone. Provide a way to abbreviate entries by omitting field values
that match a specified default value for their column. This allows removal
of a large amount of repetitive boilerplate and also lowers the barrier to
adding new columns.
Also teach genbki.pl how to translate symbolic OID references into
numeric OIDs for more cases than just "regproc"-like pg_proc references.
It can now do that for regprocedure-like references (thus solving the
problem that regproc is ambiguous for overloaded functions), operators,
types, opfamilies, opclasses, and access methods. Use this to turn
nearly all OID cross-references in the initial data into symbolic form.
This represents a very large step forward in readability and error
resistance of the initial catalog data. It should also reduce the
difficulty of renumbering OID assignments in uncommitted patches.
Also, solve the longstanding problem that frontend code that would like to
use OID macros and other information from the catalog headers often had
difficulty with backend-only code in the headers. To do this, arrange for
all generated macros, plus such other declarations as we deem fit, to be
placed in "derived" header files that are safe for frontend inclusion.
(Once clients migrate to using these pg_*_d.h headers, it will be possible
to get rid of the pg_*_fn.h headers, which only exist to quarantine code
away from clients. That is left for follow-on patches, however.)
The now-automatically-generated macros include the Anum_xxx and Natts_xxx
constants that we used to have to update by hand when adding or removing
catalog columns.
Replace the former manual method of generating OID macros for pg_type
entries with an automatic method, ensuring that all built-in types have
OID macros. (But note that this patch does not change the way that
OID macros for pg_proc entries are built and used. It's not clear that
making that match the other catalogs would be worth extra code churn.)
Add SGML documentation explaining what the new data format is and how to
work with it.
Despite being a very large change in the catalog headers, there is no
catversion bump here, because postgres.bki and related output files
haven't changed at all.
John Naylor, based on ideas from various people; review and minor
additional coding by me; previous review by Alvaro Herrera
Discussion: https://postgr.es/m/CAJVSVGWO48JbbwXkJz_yBFyGYW-M9YWxnPdxJBUosDC9ou_F0Q@mail.gmail.com
This rectifies an oversight in commit 8224de4f4, by adding a new
property 'can_include' for pg_indexam_has_property, and adjusting the
results of pg_index_column_has_property to give more appropriate
results for INCLUDEd columns.
The atomics code asserts proper alignment in various places. That's
mainly because the alignment of 64bit integers is not sufficient for
atomic operations on all platforms. Some ABIs only have four byte
alignment, but don't have atomic behavior when crossing page
boundaries.
The flags code isn't affected by that however, as the type alignment
always is sufficient for atomic operations. Nevertheless the code
asserted alignment requirements. Before 8c3debbb it was only broken on
hppa, after it probably affect further platforms.
Thus remove the assertions for pg_atomic_flag operators.
Per buildfarm animal pademelon.
Discussion: https://postgr.es/m/7223.1523124425@sss.pgh.pa.us
Backpatch: 9.5-
Under EXEC BACKEND we also need to be going through the group privileges
setup since we do support that on Unixy systems, so add that to
SubPostmasterMain().
Under Windows, we need to simply return true from
GetDataDirectoryCreatePerm(), but that wasn't happening due to a missing
#else clause.
Per buildfarm.
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Existing partition pruning is only able to work at plan time, for query
quals that appear in the parsed query. This is good but limiting, as
there can be parameters that appear later that can be usefully used to
further prune partitions.
This commit adds support for pruning subnodes of Append which cannot
possibly contain any matching tuples, during execution, by evaluating
Params to determine the minimum set of subnodes that can possibly match.
We support more than just simple Params in WHERE clauses. Support
additionally includes:
1. Parameterized Nested Loop Joins: The parameter from the outer side of the
join can be used to determine the minimum set of inner side partitions to
scan.
2. Initplans: Once an initplan has been executed we can then determine which
partitions match the value from the initplan.
Partition pruning is performed in two ways. When Params external to the plan
are found to match the partition key we attempt to prune away unneeded Append
subplans during the initialization of the executor. This allows us to bypass
the initialization of non-matching subplans meaning they won't appear in the
EXPLAIN or EXPLAIN ANALYZE output.
For parameters whose value is only known during the actual execution
then the pruning of these subplans must wait. Subplans which are
eliminated during this stage of pruning are still visible in the EXPLAIN
output. In order to determine if pruning has actually taken place, the
EXPLAIN ANALYZE must be viewed. If a certain Append subplan was never
executed due to the elimination of the partition then the execution
timing area will state "(never executed)". Whereas, if, for example in
the case of parameterized nested loops, the number of loops stated in
the EXPLAIN ANALYZE output for certain subplans may appear lower than
others due to the subplan having been scanned fewer times. This is due
to the list of matching subnodes having to be evaluated whenever a
parameter which was found to match the partition key changes.
This commit required some additional infrastructure that permits the
building of a data structure which is able to perform the translation of
the matching partition IDs, as returned by get_matching_partitions, into
the list index of a subpaths list, as exist in node types such as
Append, MergeAppend and ModifyTable. This allows us to translate a list
of clauses into a Bitmapset of all the subpath indexes which must be
included to satisfy the clause list.
Author: David Rowley, based on an earlier effort by Beena Emerson
Reviewers: Amit Langote, Robert Haas, Amul Sul, Rajkumar Raghuwanshi,
Jesper Pedersen
Discussion: https://postgr.es/m/CAOG9ApE16ac-_VVZVvv0gePSgkg_BwYEV1NBqZFqDR2bBE0X0A@mail.gmail.com
This works very much like the existing bms_last_member function, only it
traverses through the Bitmapset in the opposite direction from the most
significant bit down to the least significant bit. A special prevbit value of
-1 may be used to have the function determine the most significant bit. This
is useful for starting a loop. When there are no members less than prevbit,
the function returns -2 to indicate there are no more members.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f-K=3d5MDASNYFJpUpc20xcBnAwNC1-AOeunhn0OtkWbQ@mail.gmail.com
When an update moves a row between partitions (supported since
2f17844104), our normal logic for following update chains in READ
COMMITTED mode doesn't work anymore. Cross partition updates are
modeled as an delete from the old and insert into the new
partition. No ctid chain exists across partitions, and there's no
convenient space to introduce that link.
Not throwing an error in a partitioned context when one would have
been thrown without partitioning is obviously problematic. This commit
introduces infrastructure to detect when a tuple has been moved, not
just plainly deleted. That allows to throw an error when encountering
a deletion that's actually a move, while attempting to following a
ctid chain.
The row deleted as part of a cross partition update is marked by
pointing it's t_ctid to an invalid block, instead of self as a normal
update would. That was deemed to be the least invasive and most
future proof way to represent the knowledge, given how few infomask
bits are there to be recycled (there's also some locking issues with
using infomask bits).
External code following ctid chains should be updated to check for
moved tuples. The most likely consequence of not doing so is a missed
error.
Author: Amul Sul, editorialized by me
Reviewed-By: Amit Kapila, Pavan Deolasee, Andres Freund, Robert Haas
Discussion: http://postgr.es/m/CAAJ_b95PkwojoYfz0bzXU8OokcTVGzN6vYGCNVUukeUDrnF3dw@mail.gmail.com
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
Jsonb has a complex nature so there isn't best-for-everything way to convert it
to tsvector for full text search. Current to_tsvector(json(b)) suggests to
convert only string values, but it's possible to index keys, numerics and even
booleans value. To solve that json(b)_to_tsvector has a second required
argument contained a list of desired types of json fields. Second argument is
a jsonb scalar or array right now with possibility to add new options in a
future.
Bump catalog version
Author: Dmitry Dolgov with some editorization by me
Reviewed by: Teodor Sigaev
Discussion: https://www.postgresql.org/message-id/CA+q6zcXJQbS1b4kJ_HeAOoOc=unfnOrUEL=KGgE32QKDww7d8g@mail.gmail.com
We need to wait for the initial sync of all subscriptions. On
some (faster?) machines, this didn't make a difference, but
the (slower?) buildfarm machines are upset.
Update the built-in logical replication system to make use of the
previously added logical decoding for TRUNCATE support. Add the
required truncate callback to pgoutput and a new logical replication
protocol message.
Publications get a new attribute to determine whether to replicate
truncate actions. When updating a publication via pg_dump from an older
version, this is not set, thus preserving the previous behavior.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Add a new WAL record type for TRUNCATE, which is only used when
wal_level >= logical. (For physical replication, TRUNCATE is already
replicated via SMGR records.) Add new callback for logical decoding
output plugins to receive TRUNCATE actions.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Hash index searches acquire predicate locks on the primary
page of a bucket. It acquires a lock on both the old and new buckets
for scans that happen concurrently with page splits. During a bucket
split, a predicate lock is copied from the primary page of an old
bucket to the primary page of a new bucket.
Author: Shubham Barai, Amit Kapila
Reviewed by: Amit Kapila, Alexander Korotkov, Thomas Munro
Discussion: https://www.postgresql.org/message-id/flat/CALxAEPvNsM2GTiXdRgaaZ1Pjd1bs+sxfFsf7Ytr+iq+5JJoYXA@mail.gmail.com
The tests added as part of 9fdb675fc5 yield differing results
depending on endianess, causing buildfarm failures. As the differences
are expected, split the hash partitioning tests into a different file
and maintain alternative output. The separate file is so the amount of
duplicated output is reduced.
David produced the alternative output without a machine to test on, so
it's possible this'll require a buildfarm cycle or two to get right.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f-6f4c2Qhuipe-GY7BKmFd0FMBobRnLS7hVCoAmTszsBg@mail.gmail.com
The atomics fallback implementation for pg_atomic_flag was broken,
returning the inverted value from pg_atomic_test_set_flag(). This was
unnoticed because a) atomic flags were unused until recently b) the
test code wasn't run when the fallback implementation was in
use (because it didn't allow to test for some edge cases).
Fix the bug, and improve the fallback so it has the same behaviour as
the non-fallback implementation in the problematic edge cases. That
breaks ABI compatibility in the back branches when fallbacks are in
use, but given they were broken until now...
Author: Andres Freund
Reported-by: Daniel Gustafsson
Discussion:
https://postgr.es/m/FB948276-7B32-4B77-83E6-D00167F8EEB4@yesql.sehttps://postgr.es/m/20180406233854.uni2h3mbnveczl32@alap3.anarazel.de
Backpatch: 9.5-, where the atomics abstraction was introduced.
