use that value when the backend is new enough to allow it. This responds
to bug report from Keh-Cheng Chu pointing out that although 2 extra digits
should be sufficient to dump and restore float8 exactly, it is possible to
need 3 extra digits for float4 values.
build actually attempts to advertise itself via Bonjour. Formerly it always
did so, which meant that packagers had to decide for their users whether
this behavior was wanted or not. The default is "off" to be on the safe
side, though this represents a change in the default behavior of a
Bonjour-enabled build. Per discussion.
to unload and re-load the library.
The difficulty with unloading a library is that we haven't defined safe
protocols for doing so. In particular, there's no safe mechanism for
getting out of a "hook" function pointer unless libraries are unloaded
in reverse order of loading. And there's no mechanism at all for undefining
a custom GUC variable, so GUC would be left with a pointer to an old value
that might or might not still be valid, and very possibly wouldn't be in
the same place anymore.
While the unload and reload behavior had some usefulness in easing
development of new loadable libraries, it's of no use whatever to normal
users, so just disabling it isn't giving up that much. Someday we might
care to expend the effort to develop safe unload protocols; but even if
we did, there'd be little certainty that every third-party loadable module
was following them, so some security restrictions would still be needed.
Back-patch to 8.2; before that, LOAD was superuser-only anyway.
Security: unprivileged users could crash backend. CVE not assigned yet
source directory even for out-of-tree builds. They are now alsl built in
the build tree. This should be more convenient for certain developers'
workflows, and shouldn't really break anything else.
so that their elements are always taken as simple expressions over the
query's input columns. It originally seemed like a good idea to make them
act exactly like GROUP BY and ORDER BY, right down to the SQL92-era behavior
of accepting output column names or numbers. However, that was not such a
great idea, for two reasons:
1. It permits circular references, as exhibited in bug #5018: the output
column could be the one containing the window function itself. (We actually
had a regression test case illustrating this, but nobody thought twice about
how confusing that would be.)
2. It doesn't seem like a good idea for, eg, "lead(foo) OVER (ORDER BY foo)"
to potentially use two completely different meanings for "foo".
Accordingly, narrow down the behavior of window clauses to use only the
SQL99-compliant interpretation that the expressions are simple expressions.
Update install-sh to that from Autoconf 2.63, plus our Darwin-specific
changes (which I simplified a bit). install-sh is now able to install
multiple files in one run, so we could simplify our makefiles sometime.
install-sh also now has a -d option to create directories, so we don't need
mkinstalldirs anymore.
Use AC_PROG_MKDIR_P in configure.in, so we can use mkdir -p when available
instead of install-sh -d. For consistency with the rest of the world,
the corresponding make variable has been renamed from $(mkinstalldirs) to
$(MKDIR_P).
Instead of sending stdout/stderr to /dev/null after forking away from the
terminal, send them to postmaster.log within the data directory. Since
this opens the door to indefinite logfile bloat, recommend even more
strongly that log output be redirected when using silent_mode.
Move the postmaster's initial calls of load_hba() and load_ident() down
to after we have started the log collector, if we are going to. This
is so that errors reported by them will appear in the "usual" place.
Reclassify silent_mode as a LOGGING_WHERE, not LOGGING_WHEN, parameter,
since it's got absolutely nothing to do with the latter category.
In passing, fix some obsolete references to -S ... this option hasn't
had that switch letter for a long time.
Back-patch to 8.4, since as of 8.4 load_hba() and load_ident() are more
picky (and thus more likely to fail) than they used to be. This entire
change was driven by a complaint about those errors disappearing into
the bit bucket.
about it doesn't simplify the grammar at all, and it does invite confusion
among those who only read the SELECT syntax summary and not the full details.
Per gripe from Jaime Casanova.
It turns out that Python 2.2 is the oldest version that PL/Python compiles
with, apparently related to the introduction of iterators. Might as well
document this.
Documentation files in HTML and man formats are now prepared for
distribution using the distprep make target, like everything else. They
are placed in doc/src/sgml/html and manX and installed from there by
make install, if present. The business with the tarballs in the tarball
is gone.
Test coverage support now covers the entire source tree, including
contrib, instead of just src/backend. In a related but independent
development, the commands make coverage and make coverage-html can be run
in any directory.
This turned out to be much easier than feared. Besides a few ad hoc fixes
to pass the make target down the tree, change all affected makefiles to
list their directories in the SUBDIRS variable, changed from variants like
DIRS and WANTED_DIRS. MSVC build fix was attempted as well.
This patch adds declaration so that they end up in section 3, and adds
them to the Makefiles to install them.
Also, some synopses needed reflowing so that they look nice in 80-column
terminals.
Adds the ability to retrieve async notifications using dblink,
via the addition of the function dblink_get_notify(). Original patch
by Marcus Kempe, suggestions by Tom Lane and Alvaro Herrera, patch
review and adjustments by Joe Conway.
This switches the man page building process to use the DocBook XSL stylesheet
toolchain. The previous targets for Docbook2X are removed. configure has been
updated to look for the new tools. The Documentation appendix contains the
new build instructions. There are also a few isolated tweaks in the
documentation to improve places that came out strangely in the man pages.
Both hex format and the traditional "escape" format are automatically
handled on input. The output format is selected by the new GUC variable
bytea_output.
As committed, bytea_output defaults to HEX, which is an *incompatible
change*. We will keep it this way for awhile for testing purposes, but
should consider whether to switch to the more backwards-compatible
default of ESCAPE before 8.5 is released.
Peter Eisentraut
already treating it as text anyway, to the point that I couldn't find anything
to change except the datatype markings in catalog/*.h. The only effect that
the bytea declaration had was to cause byteaout() to be invoked when pg_dump
(or another client program) inspected the column value. Since pg_dump wasn't
expecting that, but just treating what it got as text, the net result is that
dump and reload would mangle any backslashes or non-ASCII characters in the
filename string for a C-language function. That is a very long-standing bug,
but given the lack of field complaints it doesn't seem worth trying to find
a back-patchable fix. We'll just make this change to fix it going forward.
This change will also forestall problems after the planned change to let bytea
emit hex output instead of escaped characters.
Add family of functions that did not exist earlier,
mainly due to historical omission. Original patch by
Abhijit Menon-Sen, with review and modifications by
Joe Conway. catversion.h bumped.
reviewed by Greg Smith and Josh Williams.
Following is the proposal from ITAGAKI Takahiro:
Pgbench is a famous tool to measure postgres performance, but nowadays
it does not work well because it cannot use multiple CPUs. On the other
hand, postgres server can use CPUs very well, so the bottle-neck of
workload is *in pgbench*.
Multi-threading would be a solution. The attached patch adds -j
(number of jobs) option to pgbench. If the value N is greater than 1,
pgbench runs with N threads. Connections are equally-divided into
them (ex. -c64 -j4 => 4 threads with 16 connections each). It can
run on POSIX platforms with pthread and on Windows with win32 threads.
Here are results of multi-threaded pgbench runs on Fedora 11 with intel
core i7 (8 logical cores = 4 physical cores * HT). -j8 (8 threads) was
the best and the tps is 4.5 times of -j1, that is a traditional result.
$ pgbench -i -s10
$ pgbench -n -S -c64 -j1 => tps = 11600.158593
$ pgbench -n -S -c64 -j2 => tps = 17947.100954
$ pgbench -n -S -c64 -j4 => tps = 26571.124001
$ pgbench -n -S -c64 -j8 => tps = 52725.470403
$ pgbench -n -S -c64 -j16 => tps = 38976.675319
$ pgbench -n -S -c64 -j32 => tps = 28998.499601
$ pgbench -n -S -c64 -j64 => tps = 26701.877815
Is it acceptable to use pthread in contrib module?
If ok, I will add the patch to the next commitfest.
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
conindid is the index supporting a constraint. We can use this not only for
unique/primary-key constraints, but also foreign-key constraints, which
depend on the unique index that constrains the referenced columns.
tgconstrindid is just copied from the constraint's conindid field, or is
zero for triggers not associated with constraints.
This is mainly intended as infrastructure for upcoming patches, but it has
some virtue in itself, since it exposes a relationship that you formerly
had to grovel in pg_depend to determine. I simplified one information_schema
view accordingly. (There is a pg_dump query that could also use conindid,
but I left it alone because it wasn't clear it'd get any faster.)
The original syntax made it difficult to add options without making them
into reserved words. This change parenthesizes the options to avoid that
problem, and makes provision for an explicit (and perhaps non-Boolean)
value for each option. The original syntax is still supported, but only
for the two original options ANALYZE and VERBOSE.
As a test case, add a COSTS option that can suppress the planner cost
estimates. This may be useful for including EXPLAIN output in the regression
tests, which are otherwise unable to cope with cross-platform variations in
cost estimates.
Robert Haas
not forced out-of-line unless that is necessary to make the row fit on a
page. Previously, they were forced out-of-line if needed to get the row
down to the default target size (1/4th page).
Kevin Grittner
The English FAQ has been moved to the wiki, so the translated versions should
have been removed at that point as well.
The FAQ_MINGW.html should have been removed when the platform FAQs were
integrated into the documentation (or earlier).
applied to both 8.4 and 8.5
random number seed each time. This is how it used to work years ago, but
we got rid of the seed reset because it was resetting the main random()
sequence and thus having undesirable effects on the rest of the system.
To fix, establish a private random number state for each execution of
geqo(), and initialize the state using the new GUC variable geqo_seed.
People who want to experiment with different random searches can do so
by changing geqo_seed, but you'll always get the same plan for the same
value of geqo_seed (if holding all other planner inputs constant, of course).
The new state is kept in PlannerInfo by adding a "void *" field reserved
for use by join_search hooks. Most of the rather bulky code changes in
this commit are just arranging to pass PlannerInfo around to all the GEQO
functions (many of which formerly didn't receive it).
Andres Freund, with some editorialization by Tom
Set up proper makefile dependencies in the documentation build rules,
especially around the HTML/index build. The problem we've had with all
previous solutions is that we have used the same file name, such as HTML.index
or bookindex.sgml, to mean different things at different stages of the build,
and make can't distinguish that. The solution here is that the first jade run
produces HTML.index, but does not require bookindex.sgml at all, and produces
no other html output (the latter an idea from Alvaro). The second jade run
includes bookindex.sgml, but does not recreate HTML.index. That way, when you
change an sgml file, jade is run twice and at the end all dependencies are
satisfied. Omitting the html output in the first stage also makes the full
build a lot faster.
When you run one of the print format targets, only the first jade run is run,
then the print target-specific commands. If an HTML build has completed
previously, the first jade run is skipped because the dependencies have
already been satisfied.
The draft and check targets for quick builds and syntax verification are still
there.
update documentation accordingly. This is required in order to have support
for a reentrant scanner. I'm committing this bit separately in order to have
an easy reference if we later decide to make the minimum something different
(like 2.5.33).
as noted by Sebastien Flaesch. Also update the claim that we simply throw
away fields outside this set --- that got changed later to only discard
less-significant fields.
For character types with typmod, character_octet_length columns in the
information schema now show the maximum character length times the
maximum length of a character in the server encoding, instead of some
huge value as before.
but the cure appears to be worse than the disease. It turns out that GNU
tar versions 1.14.x misinterpret -o as --same-owner, not --no-same-owner,
leading to exactly the wrong behavior for both root and nonroot users.
While that bug has been fixed for nearly five years, these tar versions
are still found in the wild, notably in OS X 10.4. Given that #4883 was
the first complaint we'd heard, it's definitely not worth fixing at the
risk of breaking things for other users. Perhaps revisit at a later date
when we're not up against a release deadline.
file to be a symlink. We tried to fix this issue with an earlier server-side
patch, but it didn't fix the whole issue.
The same bug is present in older releases as well, but the 8.4 train is
about to leave the station, and I'm not sure if have consensus on whether
we can remove the -l option in back-branches or do we need to attempt a
server-side fix to make symlinking safe.
Patch by Simon Riggs, per discussion on bug identified by Fujii Masao.
used to work as intended, but got broken some time ago (a quoted empty string
is not an empty string), and got broken some more by the changes to generate
ecpg's preproc.y automatically. Given all the unprotected uses of $(PERL)
elsewhere, it seems best to make use of the $(missing) script rather than
trying to ensure each such use is protected individually. Also fix various
bits of documentation that omitted to mention Perl as a requirement for
building from a CVS pull. Per a complaint from Robert Haas.
ArrayBuildState, per trouble report from Merlin Moncure. By adopting
this fix, we are essentially deciding that aggregate final-functions
should not modify their inputs ever. Adjust documentation and comments
to match that conclusion.
In particular, always show 0 for the date type instead of null, and show
6 (the default) for time, timestamp, and interval without a declared
precision. This is now in fuller conformance with the SQL standard.
Also clarify the documentation about this.
discovered and analyzed by Konstantin Izmailov and Tom Lane
The original implementation of the 3-argument form of get_raw_page() risked
core dumps if the 8.3 SQL function definition was mistakenly used with the
8.4 module, which is entirely likely after a dump-and-reload upgrade. To
protect 8.4 beta testers against upgrade problems, add a check on PG_NARGS.
In passing, fix missed additions to the uninstall script, and polish the
docs a trifle.
the <@ and @> operators. These are not in fact equivalent to the built-in
anyarray operators of the same names, because they have different behavior for
empty arrays, namely they don't think empty arrays are contained in anything.
That is mathematically wrong, no doubt, but until we can persuade GIN indexes
to implement the mathematical definition we should probably not change this.
Another reason for not changing it now is that we can't yet ensure the
opclasses will be updated correctly in a dump-and-reload upgrade. Per
recent discussions.
by extending the ereport() API to cater for pluralization directly. This
is better than the original method of calling ngettext outside the elog.c
code because (1) it avoids double translation, which wastes cycles and in
the worst case could give a wrong result; and (2) it avoids having to use
a different coding method in PL code than in the core backend. The
client-side uses of ngettext are not touched since neither of these concerns
is very pressing in the client environment. Per my proposal of yesterday.
instead just pointing out that a larger value may trigger use of GEQO.
Per Robert Haas.
In passing, do a bit of wordsmithing on the Genetic Query Optimizer section.
an expression that's not supposed to contain variables. Per discussion
with Gevik Babakhani, this eliminates the need for an ugly kluge (namely,
specifying some unrelated relation name). Remove one such kluge from
pg_dump.
is run at the end of archive recovery, providing a chance to do external
cleanup. Modify pg_standby so that it no longer removes the trigger file,
that is to be done using the recovery_end_command now.
Provide a "smart" failover mode in pg_standby, where we don't fail over
immediately, but only after recovering all unapplied WAL from the archive.
That gives you zero data loss assuming all WAL was archived before
failover, which is what most users of pg_standby actually want.
recovery_end_command by Simon Riggs, pg_standby changes by Fujii Masao and
myself.
pgbench_history, and pgbench_tellers, rather than just accounts, branches,
history, and tellers. This is to prevent accidental conflicts with real
application tables, as has been reported to happen at least once. Also
remove the automatic "SET search_path = public" that it did at startup,
as this seems to restrict testing flexibility without actually buying much.
Per proposal by Joshua Drake and ensuing discussion.
Joshua Drake and Tom Lane
must be used for the new database, except when copying from template0.
This is the same rule that we now enforce for locale settings, and it has
the same motivation: databases other than template0 might contain data that
would be invalid according to a different setting. This represents another
step in a continuing process of locking down ways in which encoding violations
could occur inside the backend. Per discussion of a few days ago.
In passing, fix pre-existing breakage of mbregress.sh, and fix up a couple
of ereport() calls in dbcommands.c that failed to specify sqlstate codes.
as per my recent proposal. release.sgml itself is now just a stub that should
change rarely; ideally, only once per major release to add a new include line.
Most editing work will occur in the release-N.N.sgml files. To update a back
branch for a minor release, just copy the appropriate release-N.N.sgml
file(s) into the back branch.
This commit doesn't change the end-product documentation at all, only the
source layout. However, it makes it easy to start omitting ancient information
from newer branches' documentation, should we ever decide to do that.
never a BEGIN block. This is required for Oracle compatibility and is
also plainly stated to be the behavior by our original documentation
(up until 8.1, in which the docs were adjusted to match the code's behavior;
but actually the old docs said the correct thing and the code was wrong).
Not back-patched because this introduces an incompatibility that could
break working applications. Requires release note.
"verify-ca" and "verify-full".
Since "prefer" remains the default, this will make certificate validation
off by default, which should lead to less upgrade issues.
Explain how vacuum_freeze_table_age should be tuned, and how it relates
to the other settings. Mention that vacuum_freeze_table_age also affects
when autovacuum scans the whole table.
documentation warnings against setting it nonzero unless active use of
prepared transactions is intended and a suitable transaction manager has been
installed. This should help to prevent the type of scenario we've seen
several times now where a prepared transaction is forgotten and eventually
causes severe maintenance problems (or even anti-wraparound shutdown).
The only real reason we had the default be nonzero in the first place was to
support regression testing of the feature. To still be able to do that,
tweak pg_regress to force a nonzero value during "make check". Since we
cannot force a nonzero value in "make installcheck", add a variant regression
test "expected" file that shows the results that will be obtained when
max_prepared_transactions is zero.
Also, extend the HINT messages for transaction wraparound warnings to mention
the possibility that old prepared transactions are causing the problem.
All per today's discussion.
more nearly matching the core SQL scanner. The user-visible effects are:
* Block comments (slash-star comments) now nest, as per SQL spec.
* In standard_conforming_strings mode, backslash as the last character of a
non-E string literal is now correctly taken as an ordinary character;
formerly it was misinterpreted as escaping the ending quote. (Since the
string also had to pass through the core scanner, this invariably led
to syntax errors.)
* Formerly, backslashes in the format string of RAISE were always treated as
quoting the next character, regardless of mode. Now, they are ordinary
characters with standard_conforming_strings on, while with it off, they
introduce the same set of escapes as in the core SQL scanner. Also,
escape_string_warning is now effective for RAISE format strings. These
changes make RAISE format strings work just like any other string literal.
This is implemented by copying and pasting a lot of logic from the core
scanner. It would be a good idea to look into getting rid of plpgsql's
scanner entirely in favor of using the core scanner. However, that involves
more change than I can justify making during beta --- in particular, the core
scanner would have to become re-entrant.
In passing, remove the kluge that made the plpgsql scanner emit T_FUNCTION or
T_TRIGGER as a made-up first token. That presumably had some value once upon
a time, but now it's just useless complication for both the scanner and the
grammar.
etc are no longer guaranteed to produce sorted output; per gripe from Ian
Barwick. Also improve the release note entries about to_timestamp(), per
Brendan Jurd.
how this ought to behave for multi-dimensional arrays. Per discussion,
not having it at all seems better than having it with what might prove
to be the wrong behavior. We can always add it later when we have consensus
on the correct behavior.
cstring from the output of \df. Now that the default behavior is to
exclude all system functions, the de-cluttering rationale for this behavior
seems pretty weak; and it was always quite confusing/unhelpful if you were
actually looking for I/O functions. (Not to mention if you were looking
for encoding converters or other cases that might take or return cstring.)
the checkpoint in immediate or lazy mode. This is to address complaints
that pg_start_backup() takes a long time even when there's no need to minimize
its I/O consumption.
don't cause confusion with the built-in anyarray versions of those operators.
Adjust the module's index opclasses to support the built-in operators in place
of the private ones.
The private implementations are still available under their historical
names @ and ~, so no functionality is lost. Some quick testing suggests
that they offer no real benefit over the core operators, however.
Per a complaint from Rusty Conover.
relations (including a temp table's indexes and toast table/index), and
false for normal relations. For ease of checking, this commit just adds
the column and fills it correctly --- revising the relation access machinery
to use it will come separately.
method to pass extra data to the consistent() and comparePartial() methods.
This is the core infrastructure needed to support the soon-to-appear
contrib/btree_gin module. The APIs are still upward compatible with the
definitions used in 8.3 and before, although *not* with the previous 8.4devel
function definitions.
catversion bump for changes in pg_proc entries (although these are just
cosmetic, since GIN doesn't actually look at the function signature before
calling it...)
Teodor Sigaev and Oleg Bartunov
multiple index entries in a holding area before adding them to the main index
structure. This helps because bulk insert is (usually) significantly faster
than retail insert for GIN.
This patch also removes GIN support for amgettuple-style index scans. The
API defined for amgettuple is difficult to support with fastupdate, and
the previously committed partial-match feature didn't really work with
it either. We might eventually figure a way to put back amgettuple
support, but it won't happen for 8.4.
catversion bumped because of change in GIN's pg_am entry, and because
the format of GIN indexes changed on-disk (there's a metapage now,
and possibly a pending list).
Teodor Sigaev
probes --- the BUFFER_READ_DONE probe provides the same information and more
besides. Expand the LOCK_WAIT_START/DONE probe arguments so that there's
actually some chance of telling what is being waited for. Update and
clean up the documentation.
is still available, but you must now write the long equivalent --inserts
or --column-inserts. This change is made to eliminate confusion with the
use of -d to specify a database name in most other Postgres client programs.
Original patch by Greg Mullane, modified per subsequent discussion.
noise words for the last twelve years, for compatibility with Berkeley-era
output formatting of the special INVALID values for those datatypes.
Considering that the datatypes themselves have been deprecated for awhile,
this is taking backwards compatibility a little far. Per gripe from Josh
Berkus.
amgettuple or only implement amgetbitmap, instead of the former assumption
that every AM supports both APIs. Extracted with minor editorialization
from Teodor's fast-GIN-insert patch; whatever becomes of that, this seems
like a simple and reasonable generalization of the index AM interface spec.
to 100ms (from 1000). This still seems to be comfortably larger than the
useful range of the parameter, and it should help discourage people from
picking uselessly large values. Tweak the documentation to recommend small
values, too. Per discussion of a couple weeks ago.
wrappers (similar to procedural languages). This way we don't need to retain
the nearly empty libraries, and we are more free in how to implement the
wrapper API in the future.
get rid of the OID column. This eliminates the problem discovered by Heikki
back in November that 8.4's suppression of "unnecessary" junk filtering in
INSERT/SELECT could lead to an Assert failure, or storing of oids into a table
that shouldn't have them if Asserts are off. While that particular problem
could have been solved in other ways, it seems likely to be just a forerunner
of things to come if we continue to allow tables to contain rows that disagree
with the pg_class.relhasoids setting. It's better to make this operation slow
than to sacrifice performance or risk bugs in more common code paths.
Also, add ALTER TABLE SET WITH OIDS to rewrite the table to add oids.
This was a bit more controversial, but in view of the very small amount of
extra code needed given the current ALTER TABLE infrastructure, it seems best
to eliminate the asymmetry in features.
presumably designed, but didn't act). This allows running the temp install
tests in a non-C locale, thus exercising users' real environments better.
Document how to change locales for test runs.
per-table overrides of parameters.
This removes a whole class of problems related to misusing the catalog,
and perhaps more importantly, gives us pg_dump support for the parameters.
Based on a patch by Euler Taveira de Oliveira, heavily reworked by me.
has_column_privilege and has_any_column_privilege SQL functions; fix the
information_schema views that are supposed to pay attention to column
privileges; adjust pg_stats to show stats for any column you have select
privilege on; and fix COPY to allow copying a subset of columns if the user
has suitable per-column privileges for all the columns.
To improve efficiency of some of the information_schema views, extend the
has_xxx_privilege functions to allow inquiring about the OR of a set of
privileges in just one call. This is just exposing capability that already
existed in the underlying aclcheck routines.
In passing, make the information_schema views report the owner's own
privileges as being grantable, since Postgres assumes this even when the grant
option bit is not set in the ACL. This is a longstanding oversight.
Also, make the new has_xxx_privilege functions for foreign data objects follow
the same coding conventions used by the older ones.
Stephen Frost and Tom Lane
post-data step is run in a separate worker child (a thread on Windows, a child
process elsewhere) up to the concurrent number specified by the new pg_restore
command-line --multi-thread | -m switch.
Andrew Dunstan, with some editing by Tom Lane.
qualifier, and add support for this in pg_dump.
This allows TOAST tables to have user-defined fillfactor, and will also
enable us to move the autovacuum parameters to reloptions without taking
away the possibility of setting values for TOAST tables.
case that the command is rewritten into another type of command. The old
behavior to return the command tag of the last executed command was
pretty surprising. In PL/pgSQL, for example, it meant that if a command
was rewritten to a utility statement, FOUND wasn't set at all.
CREATE/ALTER/DROP USER MAPPING are now allowed either by the server owner or
by a user with USAGE privileges for his own user name. This is more or less
what the SQL standard wants anyway (plus "implementation-defined")
Hide information_schema.user_mapping_options.option_value, unless the current
user is the one associated with the user mapping, or is the server owner and
the mapping is for PUBLIC, or is a superuser. This is to protect passwords.
Also, fix a bug in information_schema._pg_foreign_servers, which hid servers
using wrappers where the current user did not have privileges on the wrapper.
The correct behavior is to hide servers where the current user has no
privileges on the server.
to the display, not restricted in the display; new text:
The letter <literal>S</literal> adds the listing of system
objects; without <literal>S</literal>, only non-system
objects are shown.
GUC variable effective_io_concurrency controls how many concurrent block
prefetch requests will be issued.
(The best way to handle this for plain index scans is still under debate,
so that part is not applied yet --- tgl)
Greg Stark
III. Server Administration
15. Installation from Source Code
16. Installation from Source Code on Windows
17. Server Setup and Operation
to give users of binary installations a better idea where to start reading.
suggested by Nikolay Samokhvalov
like a makefile with real dependencies.
Instead of overwriting the old po file, write the new one to .po.new. This is
less annoying and integrates better with the NLS web site.
Also, we can now merge languages that don't have a po file yet, by merging
against all other po files of that language, to pick up recurring translations
automatically. This previously only worked when a po file already existed.
the default. This setting enables constraint exclusion checks only for
appendrel members (ie, inheritance children and UNION ALL arms), which are
the cases in which constraint exclusion is most likely to be useful. Avoiding
the overhead for simple queries that are unlikely to benefit should bring
the cost down to the point where this is a reasonable default setting.
Per today's discussion.
not include postgres.h nor anything else it doesn't directly need. Add
#includes to calling files as needed to compensate. Per my proposal of
yesterday.
This should be noted as a source code change in the 8.4 release notes,
since it's likely to require changes in add-on modules.
to pass the full username@realm string to the authentication instead of
just the username. This makes it possible to use pg_ident.conf to authenticate
users from multiple realms as different database users.
particular this allows EmitWarningsOnPlaceholders messages to show up in the
postmaster log by default. Update elog.h comment to make it clearer what INFO
is for, and fix one example in the SGML docs that was misusing it. Per my
gripe of yesterday.
performing dumps and restores in accordance with a security policy that
forbids logging in directly as superuser, but instead specifies that you
should log into an admin account and then SET ROLE to the superuser.
In passing, clean up some ugly and mostly-broken code for quoting shell
arguments in pg_dumpall.
Benedek László, with some help from Tom Lane
and change auto_explain's custom GUC variables to be named auto_explain.xxx
not just explain.xxx. Per discussion in connection with the
pg_stat_statements patch, it seems like a good idea to have the convention
that custom variable classes are named the same as their defining module.
Committing separately since this should happen regardless of what happens
with pg_stat_statements itself.
so that user-defined window functions are possible. For the moment you'll
have to write them in C, for lack of any interface to the WindowObject API
in the available PLs, but it's better than no support at all.
There was some debate about the best syntax for this. I ended up choosing
the "it's an attribute" position --- the other approach will inevitably be
more work, and the likely market for user-defined window functions is
probably too small to justify it.
patch. This includes the ability to force the frame to cover the whole
partition, and the ability to make the frame end exactly on the current row
rather than its last ORDER BY peer. Supporting any more of the full SQL
frame-clause syntax will require nontrivial hacking on the window aggregate
code, so it'll have to wait for 8.5 or beyond.
This doesn't do any remote or external things yet, but it gives modules
like plproxy and dblink a standardized and future-proof system for
managing their connection information.
Martin Pihlak and Peter Eisentraut
and certificate revokation list by using connection parameters or environment
variables.
Original patch by Mark Woodward, heavily reworked by Alvaro Herrera and
Magnus Hagander.
vacuuming (it's not), say "database-wide VACUUM" instead of "full-database
VACUUM" in the relevant hint messages. Also, document the permissions needed
to do this. Per today's discussion.
the basic representational details (typlen, typalign, typbyval, typstorage)
to be copied from an existing type rather than listed explicitly in the
CREATE TYPE command. The immediate reason for this is to provide a simple
solution for add-on modules that want to define types represented as int8,
float4, or float8: as of 8.4 the appropriate PASSEDBYVALUE setting is
platform-specific and so it's hard for a SQL script to know what to do.
This patch fixes the contrib/isn breakage reported by Rushabh Lathia.
libpq. As noted by Peter, adding this variable created a risk of unexpected
connection failures when talking to older server versions, and since it
doesn't do anything you can't do with PGOPTIONS, it doesn't seem really
necessary. Removing it does occasion a few extra lines in pg_regress.c,
but saving a getenv() call per libpq connection attempt is perhaps worth
that anyway.
The information on why the shared libraries are built the way they are
was not relevant to end users and has been made a mailing list archive
link in Makefile.shlib.
locate the target row, if the cursor was declared with FOR UPDATE or FOR
SHARE. This approach is more flexible and reliable than digging through the
plan tree; for instance it can cope with join cursors. But we still provide
the old code for use with non-FOR-UPDATE cursors. Per gripe from Robert Haas.
another section if required by the platform (instead of the old way of
building them in section "l" and always transforming them to the
platform-specific section).
This speeds up the installation on common platforms, and it avoids some
funny business with the man page tools and build process.
anyelement. This lacks the WITH ORDINALITY option, as well as the multiple
input arrays option added in the most recent SQL specs. But it's still a
pretty useful subset of the spec's functionality, and it is enough to
allow obsoleting contrib/intagg.
We don't actually use this anywhere, but it might come in handy for dealing
with SELECT/WITH/TABLE.
It works with both the old and the new man page target (for some value of
"works").
function as a special case.
This version still has the suspicious behavior of returning null for an
empty array (rather than zero), but this may need a wholesale revision of
empty array behavior, currently under discussion.
Jim Nasby, Robert Haas, Peter Eisentraut
specifically, we can input either the "format with designators" or the
"alternative format", and we can output the former when IntervalStyle is set
to iso_8601.
Ron Mayer
different locales. This is just syntactical sweetener over --lc-collate and
--lc-ctype. Per discussion.
While at it, properly document --lc-ctype and --lc-collate in SGML docs,
which apparently were forgotten (or purposefully ommited?) when they were
created.
("there might be triggers") rather than an exact count. This is necessary
catalog infrastructure for the upcoming patch to reduce the strength of
locking needed for trigger addition/removal. Split out and committed
separately for ease of reviewing/testing.
In passing, also get rid of the unused pg_class columns relukeys, relfkeys,
and relrefs, which haven't been maintained in many years and now have no
chance of ever being maintained (because of wishing to avoid locking).
Simon Riggs
from DateStyle, and create a new interval style that produces output matching
the SQL standard (at least for interval values that fall within the standard's
restrictions). IntervalStyle is also used to resolve the conflict between the
standard and traditional Postgres rules for interpreting negative interval
input.
Ron Mayer
data type. This patch takes the approach of allowing an optional hyphen after
each group of four hex digits.
Author: Robert Haas <robertmhaas@gmail.com>
upon requests from backends, rather than on a fixed 500msec cycle. (There's
still throttling logic to ensure it writes no more often than once per
500msec, though.) This should result in a significant reduction in stats file
write traffic in typical scenarios where the stats are demanded only
infrequently.
This approach also means that the former difficulty with changing
stats_temp_directory on-the-fly has gone away, so remove the caution about
that as well as the thrashing we did to minimize the trouble window.
In passing, also fix pgstat_report_stat() so that we will send a stats
message if we have function call stats but not table stats to report;
this fixes a bug in the recent patch to support function-call stats.
Martin Pihlak
RETURNING clause, not just a SELECT as formerly.
A side effect of this patch is that when a set-returning SQL function is used
in a FROM clause, performance is improved because the output is collected into
a tuplestore within the function, rather than using the less efficient
value-per-call mechanism.
BSD sed. So write it in Perl, which is more portable and a bit faster, too.
We already use Perl for standard documentation builds, so this imposes no
additional requirement.
via a tuplestore instead of value-per-call. Refactor a few things to reduce
ensuing code duplication with nodeFunctionscan.c. This represents the
reasonably noncontroversial part of my proposed patch to switch SQL functions
over to returning tuplestores. For the moment, SQL functions still do things
the old way. However, this change enables PL SRFs to be called in targetlists
(observe changes in plperl regression results).
recursion when we are unable to convert a localized error message to the
client's encoding. We've been over this ground before, but as reported by
Ibrar Ahmed, it still didn't work in the case of conversion failures for
the conversion-failure message itself :-(. Fix by installing a "circuit
breaker" that disables attempts to localize this message once we get into
recursion trouble.
Patch all supported branches, because it is in fact broken in all of them;
though I had to add some missing translations to the older branches in
order to expose the failure in the particular test case I was using.