This has been missed in cb0cca1, noticed before buildfarm member koel
has been able to complain while poking at a different patch. Like the
other commit, backpatch all the way down to limit the odds of merge
conflicts.
Backpatch-through: 11
A crash in the middle of a checkpoint with some two-phase state data
already flushed to disk by this checkpoint could cause a follow-up crash
recovery to recover twice the same transaction, once from what has been
found in pg_twophase/ at the beginning of recovery and a second time
when replaying its corresponding record.
This would lead to FATAL failures in the startup process during
recovery, where the same transaction would have a state recovered twice
instead of once:
LOG: recovering prepared transaction 731 from shared memory
LOG: recovering prepared transaction 731 from shared memory
FATAL: lock ExclusiveLock on object 731/0/0 is already held
This issue is fixed by skipping the addition of any 2PC state coming
from a record whose equivalent 2PC state file has already been loaded in
TwoPhaseState at the beginning of recovery by restoreTwoPhaseData(),
which is OK as long as the system has not reached a consistent state.
The timing to get a messed up recovery processing is very racy, and
would very unlikely happen. The thread that has reported the issue has
demonstrated the bug using injection points to force a PANIC in the
middle of a checkpoint.
Issue introduced in 728bd99, so backpatch all the way down.
Reported-by: "suyu.cmj" <mengjuan.cmj@alibaba-inc.com>
Author: "suyu.cmj" <mengjuan.cmj@alibaba-inc.com>
Author: Michael Paquier
Discussion: https://postgr.es/m/109e6994-b971-48cb-84f6-829646f18b4c.mengjuan.cmj@alibaba-inc.com
Backpatch-through: 11
RelationReloadIndexInfo() is a fast-path used for index reloads in the
relation cache, and it has always forgotten about updating
indisreplident, which is something that would happen after an index is
selected for a replica identity. This can lead to incorrect cache
information provided when executing a command in a transaction context
that updates indisreplident.
None of the code paths currently on HEAD that need to check upon
pg_index.indisreplident fetch its value from the relation cache, always
relying on a fresh copy on the syscache. Unfortunately, this may not be
the case of out-of-core code, that could see out-of-date value.
Author: Shruthi Gowda
Reviewed-by: Robert Haas, Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/CAASxf_PBcxax0wW-3gErUyftZ0XrCs3Lrpuhq4-Z3Fak1DoW7Q@mail.gmail.com
Backpatch-through: 11
indisvalid is switched to true for partitioned indexes when all its
partitions have valid indexes when attaching a new partition, up to the
top-most parent if all its leaves are themselves valid when dealing with
multiple layers of partitions.
The copy of the tuple from pg_index used to switch indisvalid to true
came from the relation cache, which is incorrect. Particularly, in the
case reported by Shruthi Gowda, executing a series of commands in a
single transaction would cause the validation of partitioned indexes to
use an incorrect version of a pg_index tuple, as indexes are reloaded
after an invalidation request with RelationReloadIndexInfo(), a much
faster version than a full index cache rebuild. In this case, the
limited information updated in the cache leads to an incorrect version
of the tuple used. One of the symptoms reported was the following
error, with a replica identity update, for instance:
"ERROR: attempted to update invisible tuple"
This is incorrect since 8b08f7d, so backpatch all the way down.
Reported-by: Shruthi Gowda
Author: Michael Paquier
Reviewed-by: Shruthi Gowda, Dilip Kumar
Discussion: https://postgr.es/m/CAASxf_PBcxax0wW-3gErUyftZ0XrCs3Lrpuhq4-Z3Fak1DoW7Q@mail.gmail.com
Backpatch-through: 11
Until now, when DROP DATABASE got interrupted in the wrong moment, the removal
of the pg_database row would also roll back, even though some irreversible
steps have already been taken. E.g. DropDatabaseBuffers() might have thrown
out dirty buffers, or files could have been unlinked. But we continued to
allow connections to such a corrupted database.
To fix this, mark databases invalid with an in-place update, just before
starting to perform irreversible steps. As we can't add a new column in the
back branches, we use pg_database.datconnlimit = -2 for this purpose.
An invalid database cannot be connected to anymore, but can still be
dropped.
Unfortunately we can't easily add output to psql's \l to indicate that some
database is invalid, it doesn't fit in any of the existing columns.
Add tests verifying that a interrupted DROP DATABASE is handled correctly in
the backend and in various tools.
Reported-by: Evgeny Morozov <postgresql3@realityexists.net>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20230509004637.cgvmfwrbht7xm7p6@awork3.anarazel.de
Discussion: https://postgr.es/m/20230314174521.74jl6ffqsee5mtug@awork3.anarazel.de
Backpatch: 11-, bug present in all supported versions
When vac_truncate_clog() encounters bogus datfrozenxid / datminmxid values, it
returns early. Unfortunately, until now, it did not release
WrapLimitsVacuumLock. If the backend later tries to acquire
WrapLimitsVacuumLock, the session / autovacuum worker hangs in an
uncancellable way. Similarly, other sessions will hang waiting for the
lock. However, if the backend holding the lock exited or errored out for some
reason, the lock was released.
The bug was introduced as a side effect of 566372b3d6.
It is interesting that there are no production reports of this problem. That
is likely due to a mix of bugs leading to bogus values having gotten less
common, process exit releasing locks and instances of hangs being hard to
debug for "normal" users.
Discussion: https://postgr.es/m/20230621221208.vhsqgduwfpzwxnpg@awork3.anarazel.de
Since PostgresMain calls sigsetjmp, any local variables that are not
marked "volatile" have a risk of unspecified behavior. In practice
this means that when control returns via longjmp, such variables might
get reset to their values as of the time of sigsetjmp, depending on
whether the compiler chose to put them in registers or on the stack.
We were careful about this for "send_ready_for_query", but not the
other local variables.
In the case of the timeout_enabled flags, resetting them to
their initial "false" states is actually good, since we do
"disable_all_timeouts()" in the longjmp cleanup code path. If that
does not happen, we risk uselessly calling "disable_timeout()" later,
which is harmless but a little bit expensive. Let's explicitly reset
these flags so that the behavior is correct and platform-independent.
(This change means that we really don't need the new "volatile"
markings after all, but let's install them anyway since any change
in this logic could re-introduce a problem.)
There is no issue for "firstchar" and "input_message" because those
are explicitly reinitialized each time through the query processing
loop. To make that clearer, move them to be declared inside the loop.
That leaves us with all the function-lifespan locals except the
sigjmp_buf itself marked as volatile, which seems like a good policy
to have going forward.
Because of the possibility of extra disable_timeout() calls, this
seems worth back-patching.
Sergey Shinderuk and Tom Lane
Discussion: https://postgr.es/m/2eda015b-7dff-47fd-d5e2-f1a9899b90a6@postgrespro.ru
As coded, the code would use as a base comparison the namespace OID from
the first object scanned in pg_depend when switching its namespace
dependency entry to the new one, and use it as a base of comparison for
any follow-up checks. It would also be used as the old namespace OID to
switch *from* for the extension's pg_depend entry. Hence, if the first
object scanned has a namespace different than the one stored in the
extension, we would finish by:
- Not checking that the extension objects map with the extension's
schema.
- Not switching the extension -> namespace dependency entry to the new
namespace provided by the user, making ALTER EXTENSION ineffective.
This issue exists since this command has been introduced in d9572c4 for
relocatable extension, so backpatch all the way down to 11. The test
case has been provided by Heikki, that I have tweaked a bit to show the
effects on pg_depend for the extension.
Reported-by: Heikki Linnakangas
Author: Michael Paquier, Heikki Linnakangas
Discussion: https://postgr.es/m/20eea594-a05b-4c31-491b-007b6fceef28@iki.fi
Backpatch-through: 11
On Windows, it's sometimes difficult to create a file with a path longer
than 255 chars, and if it can be created it might not be seen by the
archiver. This can be triggered by the test for tar backups with
filenames greater than 100 bytes. So we skip that test if the path would
exceed 255.
Backpatch to all live branches.
Reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/666ac55b-3400-fb2c-2cea-0281bf36a53c@dunslane.net
We create a file, so we better WAL-log it. In practice, all the
built-in index AMs and all extensions that I'm aware of write a
metapage to the init fork, which is WAL-logged, and replay of the
metapage implicitly creates the fork too. But if ambuildempty() didn't
write any page, we would miss it.
This can be seen with dummy_index_am. Set up replication, create a
'dummy_index_am' index on an unlogged table, and look at the files
created in the replica: the init fork is not created on the
replica. Dummy_index_am doesn't do anything with the relation files,
however, so it doesn't lead to any user-visible errors.
Backpatch to all supported versions.
Reviewed-by: Robert Haas
Discussion: https://www.postgresql.org/message-id/6e5bbc08-cdfc-b2b3-9e23-1a914b9850a9%40iki.fi
llvm_release_context() called llvm_enter_fatal_on_oom(), but was missing
the corresponding llvm_leave_fatal_on_oom() call. As a result, if JIT was
used at all, we were almost always in the "fatal-on-oom" state.
It only makes a difference if you use an extension written in C++, and
run out of memory in a C++ 'new' call. In that case, you would get a
PostgreSQL FATAL error, instead of the default behavior of throwing a
C++ exception.
Back-patch to all supported versions.
Reviewed-by: Daniel Gustafsson
Discussion: https://www.postgresql.org/message-id/54b78cca-bc84-dad8-4a7e-5b56f764fab5@iki.fi
If you create a table and don't insert any data into it, the relation file
is never fsync'd. You don't lose data, because an empty table doesn't have
any data to begin with, but if you crash and lose the file, subsequent
operations on the table will fail with "could not open file" error.
To fix, register an fsync request in mdcreate(), like we do for mdwrite().
Per discussion, we probably should also fsync the containing directory
after creating a new file. But that's a separate and much wider issue.
Backpatch to all supported versions.
Reviewed-by: Andres Freund, Thomas Munro
Discussion: https://www.postgresql.org/message-id/d47d8122-415e-425c-d0a2-e0160829702d%40iki.fi
The Homebrew package manager changed its default installation prefix
for the new architecture, so a couple of tests need tweaks to find
binaries.
This is a partial backpatch of dc513bc654.
It's OK to be lazy about re-binning memory segments when allocating,
because that can only leave segments in a bin that's too high. We'll
search higher bins if necessary while allocating next time, and
also eventually re-bin, so no memory can become unreachable that way.
However, when freeing memory, the largest contiguous range of free pages
might go up, so we should re-bin eagerly to make sure we don't leave the
segment in a bin that is too low for get_best_segment() to find.
The re-binning code is moved into a function of its own, so it can be
called whenever free pages are returned to the segment's free page map.
Back-patch to all supported releases.
Author: Dongming Liu <ldming101@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier version)
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CAL1p7e8LzB2LSeAXo2pXCW4%2BRya9s0sJ3G_ReKOU%3DAjSUWjHWQ%40mail.gmail.com
The ginfast.c code previously checked for conflicts in before locking
the relevant buffer, leaving a window where a RW conflict could be
missed. Re-order.
There was also a place where buffer ID and block number were confused
while trying to predicate-lock a page, noted by visual inspection.
Back-patch to all supported releases. Fixes one more problem discovered
with the reproducer from bug #17949, in this case when Dmitry tried
other index types.
Reported-by: Artem Anisimov <artem.anisimov.255@gmail.com>
Reported-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/17949-a0f17035294a55e2%40postgresql.org
When performing a bitmap heap scan, we don't want to miss concurrent
writes that occurred after we observed the heap's rs_nblocks, but before
we took predicate locks on index pages. Therefore, we can't skip
fetching any heap tuples that are referenced by the index, because we
need to test them all with CheckForSerializableConflictOut(). The
old optimization that would ignore any references to blocks >=
rs_nblocks gets in the way of that requirement, because it means that
concurrent writes in that window are ignored.
Removing that optimization shouldn't affect correctness at any isolation
level, because any new tuples shouldn't be visible to an MVCC snapshot.
There also shouldn't be any error-causing references to heap blocks past
the end, because we should have held at least an AccessShareLock on the
table before the index scan. It can't get smaller while our transaction
is running. For now, though, we'll keep the optimization at lower
levels to avoid making unnecessary changes in a bug fix.
Back-patch to all supported releases. In release 11, the code is in a
different place but not fundamentally different. Fixes one aspect of
bug #17949.
Reported-by: Artem Anisimov <artem.anisimov.255@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/17949-a0f17035294a55e2%40postgresql.org
When predicate-locking btrees, we have a special case for completely
empty btrees, since there is no page to lock. This was racy, because,
without buffer lock held, a matching key could be inserted between the
_bt_search() and the PredicateLockRelation() calls.
Fix, by rechecking _bt_search() after taking the relation-level SIREAD
lock, if using SERIALIZABLE isolation and an empty btree is discovered.
Back-patch to all supported releases. Fixes one aspect of bug #17949.
Reported-by: Artem Anisimov <artem.anisimov.255@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/17949-a0f17035294a55e2%40postgresql.org
Creation of a file with a very long name can create problems on Windows
due to its file path limits. Work around that by creating the file via a
symlink with a shorter name.
Error displayed by buildfarm animal fairywren.o
Backpatch to all live branches
When set, this environment variable was only effective for data
directories but not for all the other temporary files created by
PostgreSQL::Test::Utils. Keeping the temporary files after a successful
run can be useful for debugging purposes.
The documentation is updated to reflect the new behavior, with contents
available in doc/ since v16 and in src/test/perl/README since v15.
Author: Jacob Champion
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/CAAWbhmgHtDH1SGZ+Fw05CsXtE0mzTmjbuUxLB9mY9iPKgM6cUw@mail.gmail.com
Discussion: https://postgr.es/m/YyPd9unV14SX2bLF@paquier.xyz
Backpatch-through: 11
The logic that introduced partitioned indexes missed a few things when
invalidating a partitioned index when these are created, still the code
is written to handle recursions:
1) If created from scratch because a mapping index could not be found,
the new index created could be itself invalid, if for example it was a
partitioned index with one of its leaves invalid.
2) A CCI was missing when indisvalid is set for a parent index, leading
to inconsistent trees when recursing across more than one level for a
partitioned index creation if an invalidation of the parent was
required.
This could lead to the creation of a partition index tree where some of
the partitioned indexes are marked as invalid, but some of the parents
are marked valid, which is not something that should happen (as
validatePartitionedIndex() defines, indisvalid is switched to true for a
partitioned index iff all its partitions are themselves valid).
This patch makes sure that indisvalid is set to false on a partitioned
index if at least one of its partition is invalid. The flag is set to
true if *all* its partitions are valid.
The regression test added in this commit abuses of a failed concurrent
index creation, marked as invalid, that maps with an index created on
its partitioned table afterwards.
Reported-by: Alexander Lakhin
Reviewed-by: Alexander Lakhin
Discussion: https://postgr.es/m/14987634-43c0-0cb3-e075-94d423607e08@gmail.com
Backpatch-through: 11
If the given composite datum is toasted out-of-line,
DatumGetHeapTupleHeader will perform database accesses to detoast it.
That can invalidate the result of get_cached_rowtype, as documented
(perhaps not plainly enough) in that function's API spec; which leads
to strange errors or crashes when we try to use the TupleDesc to read
the tuple. In short then, trying to update a field of a composite
column could fail intermittently if the overall column value is wide
enough to require toasting.
We can fix the bug at no cost by just changing the order of
operations, since we don't need the TupleDesc until after detoasting.
(Other callers of get_cached_rowtype appear to get this right already,
so there's only one bug.)
Note that the added regression test case reveals this bug reliably
only with debug_discard_caches/CLOBBER_CACHE_ALWAYS.
Per bug #17994 from Alexander Lakhin. Sadly, this patch does not fix
the missing-values issue revealed in the bug discussion; we'll need
some more work to cover that.
Discussion: https://postgr.es/m/17994-5c7100b51b4790e9@postgresql.org
A portion of ALTER TABLE .. ATTACH PARTITION is to ensure that the
partition being attached to the partitioned table has a correct set of
indexes, so as there is a consistent index mapping between the
partitioned table and its new-to-be partition. However, as introduced
in 8b08f7d, the current logic could choose an invalid index as a match,
which is something that can exist when dealing with more than two levels
of partitioning, like attaching a partitioned table (that has
partitions, with an index created by CREATE INDEX ON ONLY) to another
partitioned table.
A partitioned index with indisvalid set to false is equivalent to an
incomplete partition tree, meaning that an invalid partitioned index
does not have indexes defined in all its partitions. Hence, choosing an
invalid partitioned index can create inconsistent partition index trees,
where the parent attaching to is valid, but its partition may be
invalid.
In the report from Alexander Lakhin, this showed up as an assertion
failure when validating an index. Without assertions enabled, the
partition index tree would be actually broken, as indisvalid should
be switched to true for a partitioned index once all its partitions are
themselves valid. With two levels of partitioning, the top partitioned
table used a valid index and was able to link to an invalid index stored
on its partition, itself a partitioned table.
I have studied a few options here (like the possibility to switch
indisvalid to false for the parent), but came down to the conclusion
that we'd better rely on a simple rule: invalid indexes had better never
be chosen, so as the partition attached uses and creates indexes that
the parent expects. Some regression tests are added to provide some
coverage. Note that the existing coverage is not impacted.
This is a problem since partitioned indexes exist, so backpatch all the
way down to v11.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/14987634-43c0-0cb3-e075-94d423607e08@gmail.com
Backpatch-through: 11
TParserGet() recurses for some token types, meaning it's possible
to drive it to stack overflow. Since this is a minority behavior,
I chose to add the check_stack_depth() call to the two places that
recurse rather than doing it during every single call.
While at it, add CHECK_FOR_INTERRUPTS(), because this can run
unpleasantly long for long inputs.
Per bug #17995 from Zuming Jiang. This is old, so back-patch
to all supported branches.
Discussion: https://postgr.es/m/17995-9f20ff3e6389db4c@postgresql.org
This avoids deprecation warnings from newer OpenSSL versions (3.0.0 in
particular).
This has been originally applied as 4d3db13 for v14 and newer versions,
but not on the older branches out of caution, and this commit closes the
gap to remove all these deprecation warnings in all the branches still
supported.
OPENSSL_API_COMPAT's value is set based on the oldest version of OpenSSL
supported on a branch: 1.0.1 for Postgres 13 and 0.9.8 for Postgres 11
and 12.
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/FEF81714-D479-4512-839B-C769D2605F8A@yesql.se
Discussion: https://postgr.es/m/ZJJmOH+hIOSoesux@paquier.xyz
Backpatch-through: 11
Avoid "right sibling %u of block %u is not next child" errors when
vacuuming a corrupt nbtree index. Just LOG the issue and press on.
That way VACUUM will have a decent chance of finishing off all required
processing for the index (and for the table as a whole).
This is similar to recent work from commit 5abff197, as well as work
from commit 5b861baa (later backpatched as commit 43e409ce), which
taught nbtree VACUUM to keep going when its "re-find" check fails. The
hardening added by this commit takes place directly after the "re-find"
check, right before the critical section for the first stage of page
deletion.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=dayg0vjs4+er84TS9ami=csdzjpuiCGbEw=idhwqhzQ@mail.gmail.com
Backpatch: 11- (all supported versions).
exec_parse_message() wants to create a cached plan in all cases,
including for empty input. The empty-input path does not have
a test for being in an aborted transaction, making it possible
that plancache.c will fail due to trying to do database lookups
even though there's no real work to do.
One solution would be to throw an aborted-transaction error in
this path too, but it's not entirely clear whether the lack of
such an error was intentional or whether some clients might be
relying on non-error behavior. Instead, let's hack plancache.c
so that it treats empty statements with the same logic it
already had for transaction control commands, ensuring that it
can soldier through even in an already-aborted transaction.
Per bug #17983 from Alexander Lakhin. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/17983-da4569fcb878672e@postgresql.org
The existing errhint message and docs were missing the fact that we can't
disassociate from the slot unless the subscription is disabled.
Author: Robert Sjöblom, Peter Smith
Reviewed-by: Peter Eisentraut, Amit Kapila
Backpatch-through: 11
Discussion: https://postgr.es/m/807bdf85-61ea-88e2-5712-6d9fcd4eabff@fortnox.se
Here we adjust relation_has_unique_index_for() so that it no longer makes
use of partial unique indexes as uniqueness proofs. It is incorrect to
use these as the predicates used by check_index_predicates() to set
predOK makes use of not only baserestrictinfo quals as proofs, but also
qual from join conditions. For relation_has_unique_index_for()'s case, we
need to know the relation is unique for a given set of columns before any
joins are evaluated, so if predOK was only set to true due to some join
qual, then it's unsafe to use such indexes in
relation_has_unique_index_for(). The final plan may not even make use
of that index, which could result in reading tuples that are not as
unique as the planner previously expected them to be.
Bug: #17975
Reported-by: Tor Erik Linnerud
Backpatch-through: 11, all supported versions
Discussion: https://postgr.es/m/17975-98a90c156f25c952%40postgresql.org
rewriteRuleAction neglected to check for SubLink nodes in the
securityQuals of range table entries. This could lead to failing
to convert such a SubLink to a SubPlan, resulting in assertion
crashes or weird errors later in planning.
In passing, fix some poor coding in rewriteTargetView:
we should not pass the source parsetree's hasSubLinks
field to ReplaceVarsFromTargetList's outer_hasSubLinks.
ReplaceVarsFromTargetList knows enough to ignore that
when a Query node is passed, but it's still confusing
and bad precedent: if we did try to update that flag
we'd be updating a stale copy of the parsetree.
Per bug #17972 from Alexander Lakhin. This has been broken since
we added RangeTblEntry.securityQuals (although the presented test
case only fails back to 215b43cdc), so back-patch all the way.
Discussion: https://postgr.es/m/17972-f422c094237847d0@postgresql.org
This commit fixes an oversight introduced in 10520f4, that has added
delayChkptEnd to PGPROC to avoid ABI breakages on stable branches, where
two spots have missed to initialize this variable (delayChkpt was
switched back from int to bool, and it was initialized as 0 so there was
no consequences for it):
- InitProcess(), where the per-process data structures of a backend are
initialized.
- InitAuxiliaryProcess(), same but for auxiliary processes.
An interruption during relation truncation while this flag is set could
cause an assertion failure when a follow-up process does a relation
truncation while reusing the same PGPROC entry. A second effect could
be incorrect checkpoint end delays.
While on it, add an assertion in ProcArrayClearTransaction() for
delayChkptEnd to be in line with 5788e25. This is needed only for v14.
This issue affects v11~v14, but not v15~, as we use a single field
called delayChkptFlags to delay checkpoints there.
Author: suyu.cmj (mengjuan.cmj@alibaba-inc.com)
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/9c3d2a49-db5f-43cb-840b-d58f9a684295.mengjuan.cmj@alibaba-inc.com
Backpatch-through: 11
The same routine to check if a specific pattern can be found in the
server logs was copied over four different test scripts. This refactors
the whole to use a single routine located in PostgreSQL::Test::Cluster,
named log_contains, to grab the contents of the server logs and check
for a specific pattern.
On HEAD, the code previously used assumed that slurp_file() could not
handle an undefined offset, setting it to zero, but slurp_file() does
do an extra fseek() before retrieving the log contents only if an offset
is defined. In two places, the test was retrieving the full log
contents with slurp_file() after calling substr() to apply an offset,
ignoring that slurp_file() would be able to handle that.
Backpatch all the way down to ease the introduction of new tests that
could rely on the new routine.
Author: Vignesh C
Reviewed-by: Andrew Dunstan, Dagfinn Ilmari Mannsåker, Michael Paquier
Discussion: https://postgr.es/m/CALDaNm0YSiLpjCmajwLfidQrFOrLNKPQir7s__PeVvh9U3uoTQ@mail.gmail.com
Backpatch-through: 11
Avoid "right sibling's left-link doesn't match" errors when vacuuming a
corrupt nbtree index. Just LOG the issue and press on. That way VACUUM
will have a decent chance of finishing off all required processing for
the index (and for the table as a whole).
This error was seen in the field from time to time (it's more than a
theoretical risk), so giving VACUUM the ability to press on like this
has real value. Nothing short of a REINDEX is expected to fix the
underlying index corruption, so giving up (by throwing an error) risks
making a bad situation far worse. Anything that blocks forward progress
by VACUUM like this might go unnoticed for a long time. This could
eventually lead to a wraparound/xidStopLimit outage.
Note that _bt_unlink_halfdead_page() has always been able to bail on
page deletion when the target page's left sibling page was in an
inconsistent state. It now does the same thing (returns false to back
out of the second phase of deletion) when it notices sibling link
corruption in the target page's right sibling page.
This is similar to the work from commit 5b861baa (later backpatched as
commit 43e409ce), which taught nbtree to press on with vacuuming an
index when page deletion fails to "re-find" a downlink in the target
page's parent page. The "re-find" check seems to make VACUUM bail on
page deletion more often in practice, but there is no reason to take any
chances here.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CAH2-Wzko2q2kP1+UvgJyP9g0mF4hopK0NtQZcxwvMv9_ytGhkQ@mail.gmail.com
Backpatch: 11- (all supported versions).
Commits 681d9e462 et al added a test case in namespace.sql that
implicitly relied on there not being a table "public.abc".
However, the concurrently-run transactions.sql test creates precisely
such a table, so with the right timing you'd get a failure.
Creating a table named as generically as "abc" in a common schema
seems like bad practice, so fix this by changing the name of
transactions.sql's table. (Compare 2cf8c7aa4.)
Marina Polyakova
Discussion: https://postgr.es/m/80d0201636665d82185942e7112257b4@postgrespro.ru
BRIN indexes did not properly distinguish between summaries for empty
(no rows) and all-NULL ranges, treating them as essentially the same
thing. Summaries were initialized with allnulls=true, and opclasses
simply reset allnulls to false when processing the first non-NULL value.
This however produces incorrect results if the range starts with a NULL
value (or a sequence of NULL values), in which case we forget the range
contains NULL values when adding the first non-NULL value.
This happens because the allnulls flag is used for two separate
purposes - to mark empty ranges (not representing any rows yet) and
ranges containing only NULL values.
Opclasses don't know which of these cases it is, and so don't know
whether to set hasnulls=true. Setting the flag in both cases would make
it correct, but it would also make BRIN indexes useless for queries with
IS NULL clauses. All ranges start empty (and thus allnulls=true), so all
ranges would end up with either allnulls=true or hasnulls=true.
The severity of the issue is somewhat reduced by the fact that it only
happens when adding values to an existing summary with allnulls=true.
This can happen e.g. for small tables (because a summary for the first
range exists for all BRIN indexes), or for tables with large fraction of
NULL values in the indexed columns.
Bulk summarization (e.g. during CREATE INDEX or automatic summarization)
that processes all values at once is not affected by this issue. In this
case the flags were updated in a slightly different way, not forgetting
the NULL values.
To identify empty ranges we use a new flag, stored in an unused bit in
the BRIN tuple header so the on-disk format remains the same. A matching
flag is added to BrinMemTuple, into a 3B gap after bt_placeholder.
That means there's no risk of ABI breakage, although we don't actually
pass the BrinMemTuple to any public API.
We could also skip storing index tuples for empty summaries, but then
we'd have to always process such ranges - even if there are no rows in
large parts of the table (e.g. after a bulk DELETE), it would still
require reading the pages etc. So we store them, but ignore them when
building the bitmap.
Backpatch to 11. The issue exists since BRIN indexes were introduced in
9.5, but older releases are already EOL.
Backpatch-through: 11
Reviewed-by: Justin Pryzby, Matthias van de Meent, Alvaro Herrera
Discussion: https://postgr.es/m/402430e4-7d9d-6cf1-09ef-464d80afff3b@enterprisedb.com
When merging BRIN summaries, union_tuples() did not correctly update the
target hasnulls/allnulls flags. When merging all-NULL summary into a
summary without any NULL values, the result had both flags set to false
(instead of having hasnulls=true).
This happened because the code only considered the hasnulls flags,
ignoring the possibility the source summary has allnulls=true.
Discovered while investigating issues with handling empty BRIN ranges
and handling of NULL values, but it's a separate problem (has nothing to
do with empty ranges).
Fixed by considering both flags on the source summary, and updating the
hasnulls flag on the target summary.
Backpatch to 11. The bug exists since 9.5 (where BRIN indexes were
introduced), but those releases are EOL already.
Discussion: https://postgr.es/m/9d993d0d-e431-2196-9ccc-0554d0e60154%40enterprisedb.com
If an SRF in the FROM clause references a table having row-level
security policies, and we inline that SRF into the calling query,
we neglected to mark the plan as potentially dependent on which
role is executing it. This could lead to later executions in the
same session returning or hiding rows that should have been hidden
or returned instead.
Our thanks to Wolfgang Walther for reporting this problem.
Stephen Frost and Tom Lane
Security: CVE-2023-2455
The two methods don't cooperate, so set_config_option("search_path",
...) has been ineffective under non-empty overrideStack. This defect
enabled an attacker having database-level CREATE privilege to execute
arbitrary code as the bootstrap superuser. While that particular attack
requires v13+ for the trusted extension attribute, other attacks are
feasible in all supported versions.
Standardize on the combination of NewGUCNestLevel() and
set_config_option("search_path", ...). It is newer than
PushOverrideSearchPath(), more-prevalent, and has no known
disadvantages. The "override" mechanism remains for now, for
compatibility with out-of-tree code. Users should update such code,
which likely suffers from the same sort of vulnerability closed here.
Back-patch to v11 (all supported versions).
Alexander Lakhin. Reported by Alexander Lakhin.
Security: CVE-2023-2454
Commit 153e215677 added the portlock directory. This is created in
$ENV{top_builddir} if it is set. Under PGXS, top_builddir points into
the installation directory, which is not necessarily writable and in
any case inappropriate to use by a test suite. The cause of the
problem is that the prove_installcheck target in Makefile.global
exports top_builddir, which isn't useful (since no other Perl code
actually reads it) and breaks this use case. The reason this code is
there is probably that is has been dragged around with various other
changes, in particular a0fc813266, but without a real purpose of its
own. By just removing the exporting of top_builddir in
prove_installcheck, the portlock directory then ends up under
tmp_check in the build directory, which is more suitable.
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://www.postgresql.org/message-id/78d1cfa6-0065-865d-584b-cde6d8c18aff@enterprisedb.com
These functions incautiously fetched the array's first lower bound
even when the array is zero-dimensional, thus fetching the word
after the allocated array space. While almost always harmless,
with very bad luck this could result in SIGSEGV. Fix by adding
an early exit for empty input.
Per bug #17920 from Alexander Lakhin.
Discussion: https://postgr.es/m/17920-f7c228c627b6d02e%40postgresql.org
Like plperl before f47004add, plpython wasn't being sufficiently
careful about checking that list-of-list structures represent
rectangular arrays, so that it would accept some cases in which
different parts of the "array" are nested to different depths.
This was exacerbated by Python's weak distinction between
sequences and lists, so that in some cases strings could get
treated as though they are lists (and burst into individual
characters) even though a different ordering of the upper-level
list would give a different result.
Some of this behavior was unreachable (without risking a crash)
before 81eaaf65e. It seems like a good idea to clean it all up
in the same releases, rather than shipping a non-crashing but
nonetheless visibly buggy behavior in the name of minimal change.
Hence, back-patch.
Per bug #17912 and further testing by Alexander Lakhin.
Discussion: https://postgr.es/m/17912-82ceed78731d9cdc@postgresql.org
plperl_array_to_datum() wasn't sufficiently careful about checking
that nested lists represent a rectangular array structure; it would
accept inputs such as "[1, []]". This is a bit related to the
PL/Python bug fixed in commit 81eaaf65e, but it doesn't seem to
provide any direct route to a memory stomp. Instead the likely
failure mode is for makeMdArrayResult to be passed fewer Datums than
the claimed array dimensionality requires, possibly leading to a wild
pointer dereference and SIGSEGV.
Per report from Alexander Lakhin. It's been broken for a long
time, so back-patch to all supported branches.
Discussion: https://postgr.es/m/5ebae5e4-d401-fadf-8585-ac3eaf53219c@gmail.com
If PLySequence_ToArray came across a zero-length sublist, it'd compute
the overall array size as zero, possibly leading to a memory clobber.
(This would likely qualify as a security bug, were it not that plpython
is an untrusted language already.)
I think there are other corner-case issues in this code as well, notably
that the error messages don't match the core code and for some ranges
of array sizes you'd get "invalid memory alloc request size" rather than
the intended message about array size.
Really this code has no business doing its own array size calculation
at all, so remove the faulty code in favor of using ArrayGetNItems().
Per bug #17912 from Alexander Lakhin. Bug seems to have come in with
commit 94aceed31, so back-patch to all supported branches.
Discussion: https://postgr.es/m/17912-82ceed78731d9cdc@postgresql.org
Michael Paquier
Andres Freund
Tom Lane
Andrew Dunstan
Heikki Linnakangas
Peter Eisentraut
Thomas Munro
Peter Geoghegan
Amit Kapila
David Rowley
Amit Langote
Tomas Vondra
Noah Misch
Nathan Bossart