REINDEX CONCURRENTLY run on a toast index or a toast relation could
corrupt the target indexes rebuilt, as a backend running in parallel
that manipulates toast values would directly release the lock on the
toast relation when its local operation is done, rather than releasing
the lock once the transaction that manipulated the toast values
committed.
The fix done here is simple: we now hold a ROW EXCLUSIVE lock on the
toast relation when saving or deleting a toast value until the
transaction working on them is committed, so as a concurrent reindex
happening in parallel would be able to wait for any activity and see any
new rows inserted (or deleted).
An isolation test is added to check after the case fixed here, which is
a bit fancy by design as it relies on allow_system_table_mods to rename
the toast table and its index to fixed names. This way, it is possible
to reindex them directly without any dependency on the OID of the
underlying relation. Note that this could not use a DO block either, as
REINDEX CONCURRENTLY cannot be run in a transaction block. The test is
backpatched down to 13, where it is possible, thanks to c4a7a39, to use
allow_system_table_mods in a test suite.
Reported-by: Alexey Ermakov
Analyzed-by: Andres Freund, Noah Misch
Author: Michael Paquier
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/17268-d2fb426e0895abd4@postgresql.org
Backpatch-through: 12
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed only by BRIN indexes. There are no index
pointers to individual tuples in BRIN, and the page range summary will
be updated anyway as it relies on visibility info.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
Patch by Josef Simanek, various fixes and improvements by me.
Author: Josef Simanek
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
Like 5364b357fb did for pg_commit, change the formula used to
determine number of pg_commit_ts buffers, which helps performance with
larger servers.
Discussion: https://postgr.es/m/20210115220744.GA24457@alvherre.pgsql
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Commit 8523492d simplified what it meant for an item to be considered
"dead" to VACUUM: TIDs collected in memory (in preparation for index
vacuuming) must always come from LP_DEAD stub line pointers in heap
pages, found following pruning. This formalized the idea that index
vacuuming (and heap vacuuming) are optional processes. Unlike pruning,
they can be delayed indefinitely, without any risk of that violating
fundamental invariants. For example, leaving LP_DEAD items behind
clearly won't add to the risk of transaction ID wraparound. You can't
have transaction ID wraparound without transaction IDs. Renaming
anything that references DEAD tuples (tuples with storage) reinforces
all this.
Code outside vacuumlazy.c continues to fudge the distinction between
dead/deleted tuples, and LP_DEAD items. This is necessary because
autovacuum scheduling is still mostly driven by "dead items/tuples"
statistics. In the future we may find it useful to replace this model
with something more sophisticated, as a step towards teaching autovacuum
to perform more frequent vacuuming that targeting individual indexes
that happen to be more prone to becoming bloated through version churn.
In passing, simplify some function signatures that deal with VACUUM's
dead_items array.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzktGBg4si6DEdmq3q6SoXSDqNi6MtmB8CmmTmvhsxDTLA@mail.gmail.com
This commit moves the timestamp computation of the control file within
the routine of src/common/ in charge of updating the backend's control
file, which is shared by multiple frontend tools (pg_rewind,
pg_checksums and pg_resetwal) and the backend itself.
This change has as direct effect to update the control file's timestamp
when writing the control file in pg_rewind and pg_checksums, something
that is helpful to keep track of control file updates for those
operations, something also tracked by the backend at startup within its
logs. This part is arguably a bug, as ControlFileData->time should be
updated each time a new version of the control file is written, but this
is a behavior change so no backpatch is done.
Author: Amul Sul
Reviewed-by: Nathan Bossart, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/CAAJ_b97nd_ghRpyFV9Djf9RLXkoTbOUqnocq11WGq9TisX09Fw@mail.gmail.com
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
The term "super-exclusive lock" is an acceptable synonym of "cleanup
lock". Even still, switching from one term to the other in the same
file is confusing. Standardize on "cleanup lock" within vacuumlazy.c.
Per a complaint from Andres Freund.
Update vacuumlazy.c file header comments (as well as comments above the
lazy_scan_heap function) that were largely written before the
introduction of the HOT optimization, when lazy_scan_heap did far less,
and didn't actually prune during its initial heap pass.
Since lazy_scan_heap now outsources far more work to lower level
functions, it makes sense to introduce the function by talking about the
high level invariant that dictates the order in which each phase takes
place. Also deemphasize the case where we run out of memory for TIDs,
since delaying that discussion makes it easier to talk about issues of
central importance.
Finally, remove discussion of parallel VACUUM from header comments.
These don't add much, and are in the wrong place.
Commit 2fd8685e7f simplified the checking of modified attributes that
takes place within heap_update(). This included a micro-optimization
affecting pages marked PD_PAGE_FULL: don't even try to use HOT to save a
few cycles on determining HOT safety. The assumption was that it won't
work out this time around, since it can't have worked out last time
around.
Remove the micro-optimization. It could only ever save cycles that are
consumed by the vast majority of heap_update() calls, which hardly seems
worth the added complexity. It also seems quite possible that there are
workloads that will do worse over time by repeated application of the
micro-optimization, despite saving some cycles on average, in the short
term.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAH2-WznU1L3+DMPr1F7o2eJBT7=3bAJoY6ZkWABAxNt+-afyTA@mail.gmail.com
In commit ff9f111bce I mixed up inconsistent definitions of the LSN of
the first record in a page, when the previous record ends exactly at the
page boundary. The correct LSN is adjusted to skip the WAL page header;
I failed to use that when setting XLogReaderState->overwrittenRecPtr,
so at WAL replay time VerifyOverwriteContrecord would refuse to let
replay continue past that record.
Backpatch to 10. 9.6 also contains this bug, but it's no longer being
maintained.
Discussion: https://postgr.es/m/45597.1637694259@sss.pgh.pa.us
Various places wanted to point out that tuple descriptors don't
contain the variable-length fields of pg_attribute. This started when
attacl was added, but more fields have been added since, and these
comments haven't been kept up to date consistently. Reword so that
the purpose is clearer and we don't have to keep updating them.
In most places, the variables necessarily store the same value as the
eponymous members of the XLogReaderState that we use during WAL
replay, because ReadRecord() assigns the values from the structure
members to the global variables just after XLogReadRecord() returns.
However, XLogBeginRead() adjusts the structure members but not the
global variables, so after XLogBeginRead() and before the completion
of XLogReadRecord() the values can differ. Otherwise, they must be
identical. According to my analysis, the only place where either
variable is referenced at a point where it might not have the same
value as the structure member is the refrence to EndRecPtr within
XLogPageRead.
Therefore, at every other place where we are using the global
variable, we can just switch to using the structure member instead,
and remove the global variable. However, we can, and in fact should,
do this in XLogPageRead() as well, because at that point in the code,
the global variable will actually store the start of the record we
want to read - either because it's where the last WAL record ended, or
because the read position has been changed using XLogBeginRead since
the last record was read. The structure member, on the other hand,
will already have been updated to point to the end of the record we
just read. Elsewhere, the latter is what we use as an argument to
emode_for_corrupt_record(), so we should do the same here.
This part of the patch is perhaps a bug fix, but I don't think it has
any important consequences, so no back-patch. The point here is just
to continue to whittle down the entirely excessive use of global
variables in xlog.c.
Discussion: http://postgr.es/m/CA+Tgmoao96EuNeSPd+hspRKcsCddu=b1h-QNRuKfY8VmfNQdfg@mail.gmail.com
rescanLatestTimeLine() contains a guard against switching to
a timeline that forked off from the current one prior to the
current recovery point, but that guard does not work if the
timeline switch occurs before the first WAL recod (which must
be the checkpoint record) is read. Without this patch, an
improper timeline switch is therefore possible in such cases.
This happens because rescanLatestTimeLine() relies on the global
variable EndRecPtr to understand the current position of WAL
replay. However, EndRecPtr at this point in the code contains
the endpoint of the last-replayed record, not the startpoint or
endpoint of the record being replayed now. Thus, before any
records have been replayed, it's zero, which causes the sanity
check to always pass.
To fix, pass down the correct timeline explicitly. The
EndRecPtr value we want is the one from the xlogreader, which
will be the starting position of the record we're about to
try to read, rather than the global variable, which is the
ending position of the last record we successfully read.
They're usually the same, but not in the corner case described
here.
No back-patch, because in v14 and earlier branhes, we were using
the wrong TLI here as well as the wrong LSN. In master, that was
fixed by commit 4a92a1c3d1, but
that and it's prerequisite patches are too invasive to
back-patch for such a minor issue.
Patch by me, reviewed by Amul Sul.
Discussion: http://postgr.es/m/CA+Tgmoao96EuNeSPd+hspRKcsCddu=b1h-QNRuKfY8VmfNQdfg@mail.gmail.com
A couple of spots can benefit from an added errdetail(), which matches
what we were already doing in other places; and those that cannot
withstand errdetail() can get a more descriptive primary message.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/CALj2ACV+cX1eM03GfcA=ZMLXh5fSn1X1auJLz3yuS1duPSb9QA@mail.gmail.com
This doesn't belong next to very high level discussion of the tasks that
lazy_scan_heap performs. There is already a similar, longer comment
block at the top of vacuumlazy.c that mentions lazy_scan_heap directly.
Commit ac9099fc1 rearranged the logic in spgGetCache() that determines
the index's attType (nominal input data type) and leafType (actual
type stored in leaf index tuples). Turns out this broke things for
the case where (a) the actual input data type is different from the
nominal type, (b) the opclass's config function leaves leafType
defaulted, and (c) the opclass has no "compress" function. (b) caused
us to assign the actual input data type as leafType, and then since
that's not attType, we complained that a "compress" function is
required. For non-polymorphic opclasses, condition (a) arises in
binary-compatible cases, such as using SP-GiST text_ops for a varchar
column, or using any opclass on a domain over its nominal input type.
To fix, use attType for leafType when the index's declared column type
is different from but binary-compatible with attType. Do this only in
the defaulted-leafType case, to avoid overriding any explicit
selection made by the opclass.
Per bug #17294 from Ilya Anfimov. Back-patch to v14.
Discussion: https://postgr.es/m/17294-8f6c7962ce877edc@postgresql.org
While determining xid horizons, we skip over backends that are running
Vacuum. We also ignore Create Index Concurrently, or Reindex Concurrently
for the purposes of computing Xmin for Vacuum. But we were not setting the
flags corresponding to these operations when they are performed in
parallel which was preventing Xid horizon from advancing.
The optimization related to skipping Create Index Concurrently, or Reindex
Concurrently operations was implemented in PG-14 but the fix is the same
for the Parallel Vacuum as well so back-patched till PG-13.
Author: Masahiko Sawada
Reviewed-by: Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAD21AoCLQqgM1sXh9BrDFq0uzd3RBFKi=Vfo6cjjKODm0Onr5w@mail.gmail.com
At present, there is an undocumented coding rule that you must call
RecoveryInProgress(), or do something else that results in a call
to InitXLogInsert(), before trying to write WAL. Otherwise, the
WAL construction buffers won't be initialized, resulting in
failures.
Since it's not good to rely on a status inquiry function like
RecoveryInProgress() having the side effect of initializing
critical data structures, instead do the initialization eariler,
when the backend first starts up.
Patch by me. Reviewed by Nathan Bossart and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoY7b65qRjzHN_tWUk8B4sJqk1vj1d31uepVzmgPnZKeLg@mail.gmail.com
Add a comment explaining why the pgstats accounting used during
opportunistic heap pruning operations (to maintain the current number of
dead tuples in the relation) needs to compensate by subtracting away the
number of new LP_DEAD items. This is needed so it can avoid completely
forgetting about tuples that become LP_DEAD items during pruning -- they
should still count.
It seems more natural to discuss this issue at the only relevant call
site (opportunistic pruning), since the same issue does not apply to the
only other caller (the VACUUM call site). Move everything there too.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzm7f+A6ej650gi_ifTgbhsadVW5cujAL3punpupHff5Yg@mail.gmail.com
Buildfarm members kittiwake and tadarida have witnessed errors at this
site. The site discarded key facts. Back-patch to v10 (all supported
versions).
Reviewed by Michael Paquier and Tom Lane.
Discussion: https://postgr.es/m/20211107013157.GB790288@rfd.leadboat.com
It is up to the heap_page_prune() caller to decide what to do about
updating the FSM for a page following pruning. Update old comments that
address what we might want to do as if it was the responsibility of
heap_page_prune() itself. heap_page_prune() doesn't have enough
high-level context to make a sensible choice.
Presently, the archive_status directory was scanned for each file to
archive. When there are many status files, say because archive_command
has been failing for a long time, these directory scans can get very
slow. With this change, the archiver remembers several files to archive
during each directory scan, speeding things up.
To ensure timeline history files are archived as quickly as possible,
XLogArchiveNotify() forces the archiver to do a new directory scan as
soon as the .ready file for one is created.
Nathan Bossart, per a long discussion involving many people. It is
not clear to me exactly who out of all those people reviewed this
particular patch.
Discussion: http://postgr.es/m/CA+TgmobhAbs2yabTuTRkJTq_kkC80-+jw=pfpypdOJ7+gAbQbw@mail.gmail.com
Discussion: http://postgr.es/m/620F3CE1-0255-4D66-9D87-0EADE866985A@amazon.com
In XLogCtlData, rename the structure member ThisTimeLineID to
InsertTimeLineID and update the comments to make clear that it's only
expected to be set after recovery is complete.
In StartupXLOG, replace the local variables ThisTimeLineID and
PrevTimeLineID with new local variables replayTLI and newTLI. In the
old scheme, ThisTimeLineID was the replay TLI until we created a new
timeline, and after that the replay TLI was in PrevTimeLineID. Now,
replayTLI is the TLI from which we last replayed WAL throughout the
entire function, and newTLI is either that, or the new timeline created
upon promotion.
Remove some misleading comments from the comment block just above where
recoveryTargetTimeLineGoal and friends are declared. It's become
incorrect, not only because ThisTimeLineID as a variable is now gone,
but also because the rmgr code does not care about ThisTimeLineID and
has not since what used to be the TLI field in the page header was
repurposed to store the page checksum.
Add a comment GetFlushRecPtr that it's only supposed to be used in
normal running, and an assertion to verify that this is so.
Per some ideas from Michael Paquier and some of my own. Review by
Michael Paquier also.
Discussion: http://postgr.es/m/CA+TgmoY1a2d1AnVR3tJcKmGGkhj7GGrwiNwjtKr21dxOuLBzCQ@mail.gmail.com
Quite a few buildfarm animals are warning about this, and lapwing
is actually failing (because -Werror). It's a false positive AFAICS,
so no need to do more than zero the variable to start with.
Discussion: https://postgr.es/m/YYXJnUxgw9dZKxlX@paquier.xyz
When calculating distance between float4/float8 values, we need to be a
bit more careful about NaN values in order not to trigger assert. We
consider NaN values to be equal (distace 0.0) and in infinite distance
from all other values.
On builds without asserts, this issue is mostly harmless - the ranges
may be merged in less efficient order, but the index is still correct.
Per report from Andreas Seltenreich. Backpatch to 14, where this new
BRIN opclass was introduced.
Reported-by: Andreas Seltenreich
Discussion: https://postgr.es/m/87r1bw9ukm.fsf@credativ.de
Add new comments that spell out what VACUUM expects from heap pruning:
pruning must never leave behind DEAD tuples that still have tuple
storage. This has at least been the case since commit 8523492d, which
established the principle that vacuumlazy.c doesn't have to deal with
DEAD tuples that still have tuple storage directly, except perhaps by
simply retrying pruning (to handle a rare corner case involving
concurrent transaction abort).
In passing, update some references to old symbol names that were missed
by the snapshot scalability work (specifically commit dc7420c2c9).
StartupXLOG() still has ThisTimeLineID as a local variable, but the
remaining code in xlog.c now needs to the relevant TimeLineID by some
other means. Mostly, this means that we now pass it as a function
parameter to a bunch of functions where we didn't previously.
However, a few cases require special handling:
- In functions that might be called by outside callers who
wouldn't necessarily know what timeline to specify, we get
the timeline ID from shared memory. XLogCtl->ThisTimeLineID
can be used in most cases since recovery is known to have
completed by the time those functions are called. In
xlog_redo(), we can use XLogCtl->replayEndTLI.
- XLogFileClose() needs to know the TLI of the open logfile.
Do that with a new global variable openLogTLI. While
someone could argue that this is just trading one global
variable for another, the new one has a far more narrow
purposes and is referenced in just a few places.
- read_backup_label() now returns the TLI that it obtains
by parsing the backup_label file. Previously, ReadRecord()
could be called to parse the checkpoint record without
ThisTimeLineID having been initialized. Now, the timeline
is passed down, and I didn't want to pass an uninitialized
variable; this change lets us avoid that. The old coding
didn't seem to have any practical consequences that we need
to worry about, but this is cleaner.
- In BootstrapXLOG(), it's just a constant.
Patch by me, reviewed and tested by Michael Paquier, Amul Sul, and
Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmobfAAqhfWa1kaFBBFvX+5CjM=7TE=n4r4Q1o2bjbGYBpA@mail.gmail.com
All such code deals with this global variable in one of three ways.
Sometimes the same functions use it in more than one of these ways
at the same time.
First, sometimes it's an implicit argument to one or more functions
being called in xlog.c or elsewhere, and must be set to the
appropriate value before calling those functions lest they
misbehave. In those cases, it is now passed as an explicit argument
instead.
Second, sometimes it's used to obtain the current timeline after
the end of recovery, i.e. the timeline to which WAL is being
written and flushed. Such code now calls GetWALInsertionTimeLine()
or relies on the new out parameter added to GetFlushRecPtr().
Third, sometimes it's used during recovery to store the current
replay timeline. That can change, so such code must generally
update the value before each use. It can still do that, but must
now use a local variable instead.
The net effect of these changes is to reduce by a fair amount the
amount of code that is directly accessing this global variable.
That's good, because history has shown that we don't always think
clearly about which timeline ID it's supposed to contain at any
given point in time, or indeed, whether it has been or needs to
be initialized at any given point in the code.
Patch by me, reviewed and tested by Michael Paquier, Amul Sul, and
Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmobfAAqhfWa1kaFBBFvX+5CjM=7TE=n4r4Q1o2bjbGYBpA@mail.gmail.com
Add hardening to the heapam index tuple deletion path to catch TIDs in
index pages that point to a heap item that index tuples should never
point to. The corruption we're trying to catch here is particularly
tricky to detect, since it typically involves "extra" (corrupt) index
tuples, as opposed to the absence of required index tuples in the index.
For example, a heap TID from an index page that turns out to point to an
LP_UNUSED item in the heap page has a good chance of being caught by one
of the new checks. There is a decent chance that the recently fixed
parallel VACUUM bug (see commit 9bacec15) would have been caught had
that particular check been in place for Postgres 14. No backpatch of
this extra hardening for now, though.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wzk-4_raTzawWGaiqNvkpwDXxv3y1AQhQyUeHfkU=tFCeA@mail.gmail.com
These assertions document (and verify) our high level assumptions about
how pruning can and cannot affect existing items from target heap pages.
For example, one of the new assertions verifies that pruning does not
set a heap-only tuple to LP_DEAD.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wz=vhvBx1GjF+oueHh8YQcHoQYrMi0F0zFMHEr8yc4sCoA@mail.gmail.com
Commit b4af70cb inverted the return value of the function
parallel_processing_is_safe(), but missed the amvacuumcleanup test.
Index AMs that don't support parallel cleanup at all were affected.
The practical consequences of this bug were not very serious. Hash
indexes are affected, but since they just return the number of blocks
during hashvacuumcleanup anyway, it can't have had much impact.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoA-Em+aeVPmBbL_s1V-ghsJQSxYL-i3JP8nTfPiD1wjKw@mail.gmail.com
Backpatch: 14-, where commit b4af70cb appears.
Commit b4af70cb, which simplified state managed by VACUUM, performed
refactoring of parallel VACUUM in passing. Confusion about the exact
details of the tasks that the leader process is responsible for led to
code that made it possible for parallel VACUUM to miss a subset of the
table's indexes entirely. Specifically, indexes that fell under the
min_parallel_index_scan_size size cutoff were missed. These indexes are
supposed to be vacuumed by the leader (alongside any parallel unsafe
indexes), but weren't vacuumed at all. Affected indexes could easily
end up with duplicate heap TIDs, once heap TIDs were recycled for new
heap tuples. This had generic symptoms that might be seen with almost
any index corruption involving structural inconsistencies between an
index and its table.
To fix, make sure that the parallel VACUUM leader process performs any
required index vacuuming for indexes that happen to be below the size
cutoff. Also document the design of parallel VACUUM with these
below-size-cutoff indexes.
It's unclear how many users might be affected by this bug. There had to
be at least three indexes on the table to hit the bug: a smaller index,
plus at least two additional indexes that themselves exceed the size
cutoff. Cases with just one additional index would not run into
trouble, since the parallel VACUUM cost model requires two
larger-than-cutoff indexes on the table to apply any parallel
processing. Note also that autovacuum was not affected, since it never
uses parallel processing.
Test case based on tests from a larger patch to test parallel VACUUM by
Masahiko Sawada.
Many thanks to Kamigishi Rei for her invaluable help with tracking this
problem down.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-By: Kamigishi Rei <iijima.yun@koumakan.jp>
Reported-By: Andrew Gierth <andrew@tao11.riddles.org.uk>
Diagnosed-By: Andres Freund <andres@anarazel.de>
Bug: #17245
Discussion: https://postgr.es/m/17245-ddf06aaf85735f36@postgresql.org
Discussion: https://postgr.es/m/20211030023740.qbnsl2xaoh2grq3d@alap3.anarazel.de
Backpatch: 14-, where the refactoring commit appears.
We don't modify any shared state in this function which could cause
problems for any concurrent session. This will make it look similar to the
other updates for the same structure (TransactionState) which avoids
confusion for future readers of code.
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/E1mSoYz-0007Fh-D9@gemulon.postgresql.org
Commit 0bead9af48 introduced XLOG_INCLUDE_XID flag to indicate that the
WAL record contains subXID-to-topXID association. It uses that flag later
to mark in CurrentTransactionState that top-xid is logged so that we
should not try to log it again with the next WAL record in the current
subtransaction. However, we can use a localized variable to pass that
information.
In passing, change the related function and variable names to make them
consistent with what the code is actually doing.
Author: Dilip Kumar
Reviewed-by: Alvaro Herrera, Amit Kapila
Discussion: https://postgr.es/m/E1mSoYz-0007Fh-D9@gemulon.postgresql.org
The unicode characters, while in comments and not code, caused MSVC
to emit compiler warning C4819:
The file contains a character that cannot be represented in the
current code page (number). Save the file in Unicode format to
prevent data loss.
Fix by replacing the characters in print.c with descriptive comments
containing the codepoints and symbol names, and remove the character
in brin_bloom.c which was a footnote reference copied from the paper
citation.
Per report from hamerkop in the buildfarm.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/340E4118-0D0C-4E85-8141-8C40EB22DA3A@yesql.se
Commit d168b66682, which overhauled index deletion, added a
pg_unreachable() to the end of a sort comparator used when sorting heap
TIDs from an index page. This allows the compiler to apply
optimizations that assume that the heap TIDs from the index AM must
always be unique.
That doesn't seem like a good idea now, given recent reports of
corruption involving duplicate TIDs in indexes on Postgres 14. Demote
to an assertion, just in case.
Backpatch: 14-, where index deletion was overhauled.
Comments above _bt_findinsertloc() that talk about LP_DEAD items are now
out of place. We already discuss index tuple deletion at an earlier
point in the same comment block.
Oversight in commit d168b666.
Users sometimes get concerned whe they start the server and it
emits a few messages and then doesn't emit any more messages for
a long time. Generally, what's happening is either that the
system is taking a long time to apply WAL, or it's taking a
long time to reset unlogged relations, or it's taking a long
time to fsync the data directory, but it's not easy to tell
which is the case.
To fix that, add a new 'log_startup_progress_interval' setting,
by default 10s. When an operation that is known to be potentially
long-running takes more than this amount of time, we'll log a
status update each time this interval elapses.
To avoid undesirable log chatter, don't log anything about WAL
replay when in standby mode.
Nitin Jadhav and Robert Haas, reviewed by Amul Sul, Bharath
Rupireddy, Justin Pryzby, Michael Paquier, and Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmoaHQrgDFOBwgY16XCoMtXxsrVGFB2jNCvb7-ubuEe1MGg@mail.gmail.com
Discussion: https://postgr.es/m/CAMm1aWaHF7VE69572_OLQ+MgpT5RUiUDgF1x5RrtkJBLdpRj3Q@mail.gmail.com
All the code that runs in the startup process to write WAL records
before that's allowed generally is now consecutive, so there's no
reason to shut the facility to write WAL locally off and then turn
it on again three times in a row.
Unfortunately, this requires a slight kludge in the checkpointer,
which needs to separately enable writing WAL in order to write the
checkpoint record. Because that code might run in the same process
as StartupXLOG() if we are in single-user mode, we must save/restore
the state of the LocalXLogInsertAllowed flag. Hopefully, we'll be
able to eliminate this wart in further refactoring, but it's
not too bad anyway.
Amul Sul, with modifications by me.
Discussion: http://postgr.es/m/CAAJ_b97fysj6sRSQEfOHj-y8Jfd5uPqOgO74qast89B4WfD+TA@mail.gmail.com
Michael Paquier
Daniel Gustafsson
Peter Geoghegan
Tomas Vondra
Alvaro Herrera
Tom Lane
Peter Eisentraut
Andres Freund
Robert Haas
Fujii Masao
Amit Kapila
Noah Misch