In situations where there are over 8MB of empty pages at the end of
a table, the truncation work for trailing empty pages takes longer
than deadlock_timeout, and there is frequent access to the table by
processes other than autovacuum, there was a problem with the
autovacuum worker process being canceled by the deadlock checking
code. The truncation work done by autovacuum up that point was
lost, and the attempt tried again by a later autovacuum worker. The
attempts could continue indefinitely without making progress,
consuming resources and blocking other processes for up to
deadlock_timeout each time.
This patch has the autovacuum worker checking whether it is
blocking any other thread at 20ms intervals. If such a condition
develops, the autovacuum worker will persist the work it has done
so far, release its lock on the table, and sleep in 50ms intervals
for up to 5 seconds, hoping to be able to re-acquire the lock and
try again. If it is unable to get the lock in that time, it moves
on and a worker will try to continue later from the point this one
left off.
While this patch doesn't change the rules about when and what to
truncate, it does cause the truncation to occur sooner, with less
blocking, and with the consumption of fewer resources when there is
contention for the table's lock.
The only user-visible change other than improved performance is
that the table size during truncation may change incrementally
instead of just once.
This problem exists in all supported versions but is infrequently
reported, although some reports of performance problems when
autovacuum runs might be caused by this. Initial commit is just the
master branch, but this should probably be backpatched once the
build farm and general developer usage confirm that there are no
surprising effects.
Jan Wieck
During VACUUM if we pause to perform a cycle
of index cleanup we drop the vmbuffer pin,
so we should do the same thing when heap
scan completes. This avoids holding vmbuffer
pin across the main index cleanup in VACUUM,
which could be minutes or hours longer than
necessary for correctness.
Bug report and suggested fix from Pavan Deolasee
Allow support only for freezing tuples by explicit
command. Previous coding mistakenly extended
slightly beyond what was agreed as correct on -hackers.
So essentially a partial revoke of earlier work,
leaving just the COPY FREEZE command.
Normally it is unsafe to allow ALTER TYPE ADD VALUE in a transaction block,
because instances of the value could be added to indexes later in the same
transaction, and then they would still be accessible even if the
transaction rolls back. However, we can allow this if the enum type itself
was created in the current transaction, because then any such indexes would
have to go away entirely on rollback.
The reason for allowing this is to support pg_upgrade's new usage of
pg_restore --single-transaction: in --binary-upgrade mode, pg_dump emits
enum types as a succession of ALTER TYPE ADD VALUE commands so that it can
preserve the values' OIDs. The support is a bit limited, so we'll leave
it undocumented.
Andres Freund
When a relfilenode is created in this subtransaction or
a committed child transaction and it cannot otherwise
be seen by our own process, mark tuples committed ahead
of transaction commit for all COPY commands in same
transaction. If FREEZE specified on COPY
and pre-conditions met then rows will also be frozen.
Both options designed to avoid revisiting rows after commit,
increasing performance of subsequent commands after
data load and upgrade. pg_restore changes later.
Simon Riggs, review comments from Heikki Linnakangas, Noah Misch and design
input from Tom Lane, Robert Haas and Kevin Grittner
If we had not been holding buffer pin continuously since the tuple was
initially fetched by the UPDATE or DELETE query, it would be possible for
VACUUM or a page-prune operation to move the tuple while we're trying to
copy it. This would result in a garbage "old" tuple value being passed to
an AFTER ROW UPDATE or AFTER ROW DELETE trigger. The preconditions for
this are somewhat improbable, and the timing constraints are very tight;
so it's not so surprising that this hasn't been reported from the field,
even though the bug has been there a long time.
Problem found by Andres Freund. Back-patch to all active branches.
Commit 8cb53654db, which introduced DROP
INDEX CONCURRENTLY, managed to break CREATE INDEX CONCURRENTLY via a poor
choice of catalog state representation. The pg_index state for an index
that's reached the final pre-drop stage was the same as the state for an
index just created by CREATE INDEX CONCURRENTLY. This meant that the
(necessary) change to make RelationGetIndexList ignore about-to-die indexes
also made it ignore freshly-created indexes; which is catastrophic because
the latter do need to be considered in HOT-safety decisions. Failure to
do so leads to incorrect index entries and subsequently wrong results from
queries depending on the concurrently-created index.
To fix, add an additional boolean column "indislive" to pg_index, so that
the freshly-created and about-to-die states can be distinguished. (This
change obviously is only possible in HEAD. This patch will need to be
back-patched, but in 9.2 we'll use a kluge consisting of overloading the
formerly-impossible state of indisvalid = true and indisready = false.)
In addition, change CREATE/DROP INDEX CONCURRENTLY so that the pg_index
flag changes they make without exclusive lock on the index are made via
heap_inplace_update() rather than a normal transactional update. The
latter is not very safe because moving the pg_index tuple could result in
concurrent SnapshotNow scans finding it twice or not at all, thus possibly
resulting in index corruption. This is a pre-existing bug in CREATE INDEX
CONCURRENTLY, which was copied into the DROP code.
In addition, fix various places in the code that ought to check to make
sure that the indexes they are manipulating are valid and/or ready as
appropriate. These represent bugs that have existed since 8.2, since
a failed CREATE INDEX CONCURRENTLY could leave a corrupt or invalid
index behind, and we ought not try to do anything that might fail with
such an index.
Also fix RelationReloadIndexInfo to ensure it copies all the pg_index
columns that are allowed to change after initial creation. Previously we
could have been left with stale values of some fields in an index relcache
entry. It's not clear whether this actually had any user-visible
consequences, but it's at least a bug waiting to happen.
In addition, do some code and docs review for DROP INDEX CONCURRENTLY;
some cosmetic code cleanup but mostly addition and revision of comments.
This will need to be back-patched, but in a noticeably different form,
so I'm committing it to HEAD before working on the back-patch.
Problem reported by Amit Kapila, diagnosis by Pavan Deolassee,
fix by Tom Lane and Andres Freund.
This reverts commit d573e239f0, "Take fewer
snapshots". While that seemed like a good idea at the time, it caused
execution to use a snapshot that had been acquired before locking any of
the tables mentioned in the query. This created user-visible anomalies
that were not present in any prior release of Postgres, as reported by
Tomas Vondra. While this whole area could do with a redesign (since there
are related cases that have anomalies anyway), it doesn't seem likely that
any future patch would be reasonably back-patchable; and we don't want 9.2
to exhibit a behavior that's subtly unlike either past or future releases.
Hence, revert to prior code while we rethink the problem.
errcontext() is typically used in an error context callback function, not
within an ereport() invocation like e.g errmsg and errdetail are. That means
that the message domain that the TEXTDOMAIN magic in ereport() determines
is not the right one for the errcontext() calls. The message domain needs to
be determined by the C file containing the errcontext() call, not the file
containing the ereport() call.
Fix by turning errcontext() into a macro that passes the TEXTDOMAIN to use
for the errcontext message. "errcontext" was used in a few places as a
variable or struct field name, I had to rename those out of the way, now
that errcontext is a macro.
We've had this problem all along, but this isn't doesn't seem worth
backporting. It's a fairly minor issue, and turning errcontext from a
function to a macro requires at least a recompile of any external code that
calls errcontext().
The trigger and rule cases need to split up the input name list, but
they mustn't corrupt the passed-in data structure, since it could be part
of a cached utility-statement parsetree. Per bug #7641.
This case got broken in 8.4 by the addition of an error check that
complains if ALTER TABLE ONLY is used on a table that has children.
We do use ONLY for this situation, but it's okay because the necessary
recursion occurs at a higher level. So we need to have a separate
flag to suppress recursion without making the error check.
Reported and patched by Pavan Deolasee, with some editorial adjustments by
me. Back-patch to 8.4, since this is a regression of functionality that
worked in earlier branches.
In its original conception, it was leaving some objects into the old
schema, but without their proper pg_depend entries; this meant that the
old schema could be dropped, causing future pg_dump calls to fail on the
affected database. This was originally reported by Jeff Frost as #6704;
there have been other complaints elsewhere that can probably be traced
to this bug.
To fix, be more consistent about altering a table's subsidiary objects
along the table itself; this requires some restructuring in how tables
are relocated when altering an extension -- hence the new
AlterTableNamespaceInternal routine which encapsulates it for both the
ALTER TABLE and the ALTER EXTENSION cases.
There was another bug lurking here, which was unmasked after fixing the
previous one: certain objects would be reached twice via the dependency
graph, and the second attempt to move them would cause the entire
operation to fail. Per discussion, it seems the best fix for this is to
do more careful tracking of objects already moved: we now maintain a
list of moved objects, to avoid attempting to do it twice for the same
object.
Authors: Alvaro Herrera, Dimitri Fontaine
Reviewed by Tom Lane
This prevents surprising behavior when a FOR EACH ROW trigger
BEFORE UPDATE or BEFORE DELETE directly or indirectly updates or
deletes the the old row. Prior to this patch the requested action
on the row could be silently ignored while all triggered actions
based on the occurence of the requested action could be committed.
One example of how this could happen is if the BEFORE DELETE
trigger for a "parent" row deleted "children" which had trigger
functions to update summary or status data on the parent.
This also prevents similar surprising problems if the query has a
volatile function which updates a target row while it is already
being updated.
There are related issues present in FOR UPDATE cursors and READ
COMMITTED queries which are not handled by this patch. These
issues need further evalution to determine what change, if any, is
needed.
Where the new error messages are generated, in most cases the best
fix will be to move code from the BEFORE trigger to an AFTER
trigger. Where this is not feasible, the trigger can avoid the
error by re-issuing the triggering statement and returning NULL.
Documentation changes will be submitted in a separate patch.
Kevin Grittner and Tom Lane with input from Florian Pflug and
Robert Haas, based on problems encountered during conversion of
Wisconsin Circuit Court trigger logic to plpgsql triggers.
... and have sepgsql use it to determine whether to check permissions
during certain operations. Indexes that are being created as a result
of REINDEX, for instance, do not need to have their permissions checked;
they were already checked when the index was created.
Author: KaiGai Kohei, slightly revised by me
The initial transition value is stored as a text string and not fed to the
transition type's input function until runtime (so that values such as
"now" don't get frozen at creation time). Previously, CREATE AGGREGATE
didn't do anything with it but that, which meant that even erroneous values
would be accepted and not complained of until the aggregate is used. This
seems unhelpful, and it's confused at least one user, as in Rhys Stewart's
recent report. It seems worth taking a few more cycles to invoke the input
function and verify that the value is acceptable. We can't do this if the
transition type is polymorphic, but in normal aggregates we know the actual
transition type so we can call the right input function.
Per discussion, schema-element subcommands are not allowed together with
this option, since it's not very obvious what should happen to the element
objects.
Fabrízio de Royes Mello
Remove duplicate implementation of catalog munging and miscellaneous
privilege and consistency checks. Instead rely on already existing data
in objectaddress.c to do the work.
Author: KaiGai Kohei
Tweaked by me
Reviewed by Robert Haas
Instead of having each object type implement the catalog munging
independently, centralize knowledge about how to do it and expand the
existing table in objectaddress.c with enough data about each object
type to support this operation.
Author: KaiGai Kohei
Tweaks by me
Reviewed by Robert Haas
If the label is already in the enum the statement becomes a no-op.
This will reduce the pain that comes from our not allowing this
operation inside a transaction block.
Andrew Dunstan, reviewed by Tom Lane and Magnus Hagander.
The previous scheme had bugs in some corner cases involving tables that had
been renamed since a view was made. This could result in dumped views that
failed to reload or reloaded incorrectly, as seen in bug #7553 from Lloyd
Albin, as well as in some pgsql-hackers discussion back in January. Also,
its behavior for printing EXPLAIN plans was sometimes confusing because of
willingness to use the same alias for multiple RTEs (it was Ashutosh
Bapat's complaint about that aspect that started the January thread).
To fix, ensure that each RTE in the query has a unique unqualified alias,
by modifying the alias if necessary (we add "_" and digits as needed to
create a non-conflicting name). Then we can just print its variables with
that alias, avoiding the confusing and bug-prone scheme of sometimes
schema-qualifying variable names. In EXPLAIN, it proves to be expedient to
take the further step of only assigning such aliases to RTEs that are
actually referenced in the query, since the planner has a habit of
generating extra RTEs with the same alias in situations such as
inheritance-tree expansion.
Although this fixes a bug of very long standing, I'm hesitant to back-patch
such a noticeable behavioral change. My experiments while creating a
regression test convinced me that actually incorrect output (as opposed to
confusing output) occurs only in very narrow cases, which is backed up by
the lack of previous complaints from the field. So we may be better off
living with it in released branches; and in any case it'd be smart to let
this ripen awhile in HEAD before we consider back-patching it.
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
The heapam XLog functions are used by other modules, not all of which
are interested in the rest of the heapam API. With this, we let them
get just the XLog stuff in which they are interested and not pollute
them with unrelated includes.
Also, since heapam.h no longer requires xlog.h, many files that do
include heapam.h no longer get xlog.h automatically, including a few
headers. This is useful because heapam.h is getting pulled in by
execnodes.h, which is in turn included by a lot of files.
The GUC check hooks for transaction_read_only and transaction_isolation
tried to check RecoveryInProgress(), so as to disallow setting read/write
mode or serializable isolation level (respectively) in hot standby
sessions. However, GUC check hooks can be called in many situations where
we're not connected to shared memory at all, resulting in a crash in
RecoveryInProgress(). Among other cases, this results in EXEC_BACKEND
builds crashing during child process start if default_transaction_isolation
is serializable, as reported by Heikki Linnakangas. Protect those calls
by silently allowing any setting when not inside a transaction; which is
okay anyway since these GUCs are always reset at start of transaction.
Also, add a check to GetSerializableTransactionSnapshot() to complain
if we are in hot standby. We need that check despite the one in
check_XactIsoLevel() because default_transaction_isolation could be
serializable. We don't want to complain any sooner than this in such
cases, since that would prevent running transactions at all in such a
state; but a transaction can be run, if SET TRANSACTION ISOLATION is done
before setting a snapshot. Per report some months ago from Robert Haas.
Back-patch to 9.1, since these problems were introduced by the SSI patch.
Kevin Grittner and Tom Lane, with ideas from Heikki Linnakangas
This situation creates a dependency loop that confuses pg_dump and probably
other things. Moreover, since the mental model is that the extension
"contains" schemas it owns, but "is contained in" its extschema (even
though neither is strictly true), having both true at once is confusing for
people too. So prevent the situation from being set up.
Reported and patched by Thom Brown. Back-patch to 9.1 where extensions
were added.
This command generated new pg_depend entries linking the index to the
constraint and the constraint to the table, which match the entries made
when a unique or primary key constraint is built de novo. However, it did
not bother to get rid of the entries linking the index directly to the
table. We had considered the issue when the ADD CONSTRAINT USING INDEX
patch was written, and concluded that we didn't need to get rid of the
extra entries. But this is wrong: ALTER COLUMN TYPE wasn't expecting such
redundant dependencies to exist, as reported by Hubert Depesz Lubaczewski.
On reflection it seems rather likely to break other things as well, since
there are many bits of code that crawl pg_depend for one purpose or
another, and most of them are pretty naive about what relationships they're
expecting to find. Fortunately it's not that hard to get rid of the extra
dependency entries, so let's do that.
Back-patch to 9.1, where ALTER TABLE ADD CONSTRAINT USING INDEX was added.
Formerly we relied on checking after-the-fact to see if an expression
contained aggregates, window functions, or sub-selects when it shouldn't.
This is grotty, easily forgotten (indeed, we had forgotten to teach
DefineIndex about rejecting window functions), and none too efficient
since it requires extra traversals of the parse tree. To improve matters,
define an enum type that classifies all SQL sub-expressions, store it in
ParseState to show what kind of expression we are currently parsing, and
make transformAggregateCall, transformWindowFuncCall, and transformSubLink
check the expression type and throw error if the type indicates the
construct is disallowed. This allows removal of a large number of ad-hoc
checks scattered around the code base. The enum type is sufficiently
fine-grained that we can still produce error messages of at least the
same specificity as before.
Bringing these error checks together revealed that we'd been none too
consistent about phrasing of the error messages, so standardize the wording
a bit.
Also, rewrite checking of aggregate arguments so that it requires only one
traversal of the arguments, rather than up to three as before.
In passing, clean up some more comments left over from add_missing_from
support, and annotate some tests that I think are dead code now that that's
gone. (I didn't risk actually removing said dead code, though.)
If a crash occurred immediately after the first nextval() call for a serial
column, WAL replay would restore the sequence to a state in which it
appeared that no nextval() had been done, thus allowing the first sequence
value to be returned again by the next nextval() call; as reported in
bug #6748 from Xiangming Mei.
More generally, the problem would occur if an ALTER SEQUENCE was executed
on a freshly created or reset sequence. (The manifestation with serial
columns was introduced in 8.2 when we added an ALTER SEQUENCE OWNED BY step
to serial column creation.) The cause is that sequence creation attempted
to save one WAL entry by writing out a WAL record that made it appear that
the first nextval() had already happened (viz, with is_called = true),
while marking the sequence's in-database state with log_cnt = 1 to show
that the first nextval() need not emit a WAL record. However, ALTER
SEQUENCE would emit a new WAL entry reflecting the actual in-database state
(with is_called = false). Then, nextval would allocate the first sequence
value and set is_called = true, but it would trust the log_cnt value and
not emit any WAL record. A crash at this point would thus restore the
sequence to its post-ALTER state, causing the next nextval() call to return
the first sequence value again.
To fix, get rid of the idea of logging an is_called status different from
reality. This means that the first nextval-driven WAL record will happen
at the first nextval call not the second, but the marginal cost of that is
pretty negligible. In addition, make sure that ALTER SEQUENCE resets
log_cnt to zero in any case where it touches sequence parameters that
affect future nextval results. This will result in some user-visible
changes in the contents of a sequence's log_cnt column, as reflected in the
patch's regression test changes; but no application should be depending on
that anyway, since it was already true that log_cnt changes rather
unpredictably depending on checkpoint timing.
In addition, make some basically-cosmetic improvements to get rid of
sequence.c's undesirable intimacy with page layout details. It was always
really trying to WAL-log the contents of the sequence tuple, so we should
have it do that directly using a HeapTuple's t_data and t_len, rather than
backing into it with some magic assumptions about where the tuple would be
on the sequence's page.
Back-patch to all supported branches.
The initially implemented syntax, "CHECK NO INHERIT (expr)" was not
deemed very good, so switch to "CHECK (expr) NO INHERIT" instead. This
way it looks similar to SQL-standards compliant constraint attribute.
Backport to 9.2 where the new syntax and feature was introduced.
Per discussion.
The code was setting it true for other constraints, which is
bogus. Doing so caused bogus catalog entries for such constraints, and
in particular caused an error to be raised when trying to drop a
constraint of types other than CHECK from a table that has children,
such as reported in bug #6712.
In 9.2, additionally ignore connoinherit=true for other constraint
types, to avoid having to force initdb; existing databases might already
contain bogus catalog entries.
Includes a catversion bump (in HEAD only).
Bug report from Miroslav Šulc
Analysis from Amit Kapila and Noah Misch; Amit also contributed the patch.
Commit 3855968f32 added syntax, pg_dump,
psql support, and documentation, but the triggers didn't actually fire.
With this commit, they now do. This is still a pretty basic facility
overall because event triggers do not get a whole lot of information
about what the user is trying to do unless you write them in C; and
there's still no option to fire them anywhere except at the very
beginning of the execution sequence, but it's better than nothing,
and a good building block for future work.
Along the way, add a regression test for ALTER LARGE OBJECT, since
testing of event triggers reveals that we haven't got one.
Dimitri Fontaine and Robert Haas
They don't actually do anything yet; that will get fixed in a
follow-on commit. But this gets the basic infrastructure in place,
including CREATE/ALTER/DROP EVENT TRIGGER; support for COMMENT,
SECURITY LABEL, and ALTER EXTENSION .. ADD/DROP EVENT TRIGGER;
pg_dump and psql support; and documentation for the anticipated
initial feature set.
Dimitri Fontaine, with review and a bunch of additional hacking by me.
Thom Brown extensively reviewed earlier versions of this patch set,
but there's not a whole lot of that code left in this commit, as it
turns out.
Formerly, when trying to copy both indexes and comments, CREATE TABLE LIKE
had to pre-assign names to indexes that had comments, because it made up an
explicit CommentStmt command to apply the comment and so it had to know the
name for the index. This creates bad interactions with other indexes, as
shown in bug #6734 from Daniele Varrazzo: the preassignment logic couldn't
take any other indexes into account so it could choose a conflicting name.
To fix, add a field to IndexStmt that allows it to carry a comment to be
assigned to the new index. (This isn't a user-exposed feature of CREATE
INDEX, only an internal option.) Now we don't need preassignment of index
names in any situation.
I also took the opportunity to refactor DefineIndex to accept the IndexStmt
as such, rather than passing all its fields individually in a mile-long
parameter list.
Back-patch to 9.2, but no further, because it seems too dangerous to change
IndexStmt or DefineIndex's API in released branches. The bug exists back
to 9.0 where CREATE TABLE LIKE grew the ability to copy comments, but given
the lack of prior complaints we'll just let it go unfixed before 9.2.
When reading from a text- or CSV-format file in file_fdw, the datatype
input routines can consume a significant fraction of the runtime.
Often, the query does not need all the columns, so we can get a useful
speed boost by skipping I/O conversion for unnecessary columns.
To support this, add a "convert_selectively" option to the core COPY code.
This is undocumented and not accessible from SQL (for now, anyway).
Etsuro Fujita, reviewed by KaiGai Kohei
Per bug #6593, REASSIGN OWNED fails when the affected role has created
an extension. Even though the user related to the extension is not
nominally the owner, its OID appears on pg_shdepend and thus causes
problems when the user is to be dropped.
This commit adds code to change the "ownership" of the extension itself,
not of the contained objects. This is fine because it's currently only
called from REASSIGN OWNED, which would also modify the ownership of the
contained objects. However, this is not sufficient for a working ALTER
OWNER implementation extension.
Back-patch to 9.1, where extensions were introduced.
Bug #6593 reported by Emiliano Leporati.
If a CHECK constraint or index definition contained a whole-row Var (that
is, "table.*"), an attempt to copy that definition via CREATE TABLE LIKE or
table inheritance produced incorrect results: the copied Var still claimed
to have the rowtype of the source table, rather than the created table.
For the LIKE case, it seems reasonable to just throw error for this
situation, since the point of LIKE is that the new table is not permanently
coupled to the old, so there's no reason to assume its rowtype will stay
compatible. In the inheritance case, we should ideally allow such
constraints, but doing so will require nontrivial refactoring of CREATE
TABLE processing (because we'd need to know the OID of the new table's
rowtype before we adjust inherited CHECK constraints). In view of the lack
of previous complaints, that doesn't seem worth the risk in a back-patched
bug fix, so just make it throw error for the inheritance case as well.
Along the way, replace change_varattnos_of_a_node() with a more robust
function map_variable_attnos(), which is capable of being extended to
handle insertion of ConvertRowtypeExpr whenever we get around to fixing
the inheritance case nicely, and in the meantime it returns a failure
indication to the caller so that a helpful message with some context can be
thrown. Also, this code will do the right thing with subselects (if we
ever allow them in CHECK or indexes), and it range-checks varattnos before
using them to index into the map array.
Per report from Sergey Konoplev. Back-patch to all supported branches.
The LISTEN/NOTIFY subsystem got confused if SimpleLruZeroPage failed,
which would typically happen as a result of a write() failure while
attempting to dump a dirty pg_notify page out of memory. Subsequently,
all attempts to send more NOTIFY messages would fail with messages like
"Could not read from file "pg_notify/nnnn" at offset nnnnn: Success".
Only restarting the server would clear this condition. Per reports from
Kevin Grittner and Christoph Berg.
Back-patch to 9.0, where the problem was introduced during the
LISTEN/NOTIFY rewrite.
The latter was already the dominant use, and it's preferable because
in C the convention is that intXX means XX bits. Therefore, allowing
mixed use of int2, int4, int8, int16, int32 is obviously confusing.
Remove the typedefs for int2 and int4 for now. They don't seem to be
widely used outside of the PostgreSQL source tree, and the few uses
can probably be cleaned up by the time this ships.
During an update of a PK row, we can skip firing the RI trigger if any old
key value is NULL, because then the row could not have had any matching
rows in the FK table. Conversely, during an update of an FK row, the
outcome is determined if any new key value is NULL. In either case it
becomes unnecessary to compare individual key values.
This patch was inspired by discussion of Vik Reykja's patch to use IS NOT
DISTINCT semantics for the key comparisons. In the event there is no need
for that and so this patch looks nothing like his, but he should still get
credit for having re-opened consideration of the trigger skip logic.
Previously we followed the SQL92 wording, "MATCH <unspecified>", but since
SQL99 there's been a less awkward way to refer to the default style.
In addition to the code changes, pg_constraint.confmatchtype now stores
this match style as 's' (SIMPLE) rather than 'u' (UNSPECIFIED). This
doesn't affect pg_dump or psql because they use pg_get_constraintdef()
to reconstruct foreign key definitions. But other client-side code might
examine that column directly, so this change will have to be marked as
an incompatibility in the 9.3 release notes.
Because permissions are assigned to element types, not array types,
complaining about permission denied on an array type would be
misleading to users. So adjust the reporting to refer to the element
type instead.
In order not to duplicate the required logic in two dozen places,
refactor the permission denied reporting for types a bit.
pointed out by Yeb Havinga during the review of the type privilege
feature
In lazy_scan_heap, we could issue bogus warnings about incorrect
information in the visibility map, because we checked the visibility
map bit before locking the heap page, creating a race condition. Fix
by rechecking the visibility map bit before we complain. Rejigger
some related logic so that we rely on the possibly-outdated
all_visible_according_to_vm value as little as possible.
In heap_multi_insert, it's not safe to clear the visibility map bit
before beginning the critical section. The visibility map is not
crash-safe unless we treat clearing the bit as a critical operation.
Specifically, if the transaction were to error out after we set the
bit and before entering the critical section, we could end up writing
the heap page to disk (with the bit cleared) and crashing before the
visibility map page made it to disk. That would be bad. heap_insert
has this correct, but somehow the order of operations got rearranged
when heap_multi_insert was added.
Also, add some more comments to visibilitymap_test, lazy_scan_heap,
and IndexOnlyNext, expounding on concurrency issues.
Per extensive code review by Andres Freund, and further review by Tom
Lane, who also made the original report about the bogus warnings.
We allow non-superusers to create procedural languages (with restrictions)
and range datatypes. Previously, the automatically-created support
functions for these objects ended up owned by the creating user. This
represents a rather considerable security hazard, because the owning user
might be able to alter a support function's definition in such a way as to
crash the server, inject trojan-horse SQL code, or even execute arbitrary
C code directly. It appears that right now the only actually exploitable
problem is the infinite-recursion bug fixed in the previous patch for
CVE-2012-2655. However, it's not hard to imagine that future additions of
more ALTER FUNCTION capability might unintentionally open up new hazards.
To forestall future problems, cause these support functions to be owned by
the bootstrap superuser, not the user creating the parent object.
Per recent discussion, the error message for this was actually a trifle
inaccurate, since it said "cannot be cast" which might be incorrect.
Adjust that wording, and add a HINT suggesting that a USING clause might
be needed.
When the "hot" members of PGPROC were split off to separate PGXACT structs,
many PGPROC fields referred to in comments were moved to PGXACT, but the
comments were neglected in the commit. Mostly this is just a search/replace
of PGPROC with PGXACT, but the way the dummy PGPROC entries are created for
prepared transactions changed more, making some of the comments totally
bogus.
Noah Misch
If the tablespace directory is missing entirely, we allow DROP TABLESPACE
to go through, on the grounds that it should be possible to clean up the
catalog entry in such a situation. However, we forgot that the pg_tblspc
symlink might still be there. We should try to remove the symlink too
(but not fail if it's no longer there), since not doing so can lead to
weird behavior subsequently, as per report from Michael Nolan.
There was some discussion of adding dependency links to prevent DROP
TABLESPACE when the catalogs still contain references to the tablespace.
That might be worth doing too, but it's an orthogonal question, and in
any case wouldn't be back-patchable.
Back-patch to 9.0, which is as far back as the logic looks like this.
We could possibly do something similar in 8.x, but given the lack of
reports I'm not sure it's worth the trouble, and anyway the case could
not arise in the form the logic is meant to cover (namely, a post-DROP
transaction rollback having resurrected the pg_tablespace entry after
some or all of the filesystem infrastructure is gone).
"Unexpected EOF on client connection" without an open transaction
is mostly noise, so turn it into DEBUG1. With an open transaction it's
still indicating a problem, so keep those as ERROR, and change the message
to indicate that it happened in a transaction.
The alternative of disallowing index-only scans in HS operation was
discussed, but the consensus was that it was better to treat marking
a page all-visible as a recovery conflict for snapshots that could still
fail to see XIDs on that page. We may in the future try to soften this,
so that we simply force index scans to do heap fetches in cases where
this may be an issue, rather than throwing a hard conflict.
Prohibiting this outright would break dumps taken from older versions
that contain such casts, which would create far more pain than is
justified here.
Per report by Jaime Casanova and subsequent discussion.
We must set the visibility map bit before releasing our exclusive lock
on the heap page; otherwise, someone might clear the heap page bit
before we set the visibility map bit, leading to a situation where the
visibility map thinks the page is all-visible but it's really not.
This problem has existed since 8.4, but it wasn't critical before we
had index-only scans, since the worst case scenario was that the page
wouldn't get vacuumed until the next scan_all vacuum.
Along the way, a couple of minor, related improvements: (1) if we
pause the heap scan to do an index vac cycle, release any visibility
map page we're holding, since really long-running pins are not good
for a variety of reasons; and (2) warn if we see a page that's marked
all-visible in the visibility map but not on the page level, since
that should never happen any more (it was allowed in previous
releases, but not in 9.2).
The original syntax wasn't universally loved, and it didn't allow its
usage in CREATE TABLE, only ALTER TABLE. It now works everywhere, and
it also allows using ALTER TABLE ONLY to add an uninherited CHECK
constraint, per discussion.
The pg_constraint column has accordingly been renamed connoinherit.
This commit partly reverts some of the changes in
61d81bd28d, particularly some pg_dump and
psql bits, because now pg_get_constraintdef includes the necessary NO
INHERIT within the constraint definition.
Author: Nikhil Sontakke
Some tweaks by me
Previously, we used SetBufferCommitInfoNeedsSave, but that's really
intended for dirty-marks we can theoretically afford to lose, such as
hint bits. As for 9.2, the PD_ALL_VISIBLE mustn't be lost in this
way, since we could then end up with a heap page that isn't
all-visible and a visibility map page that is all visible, causing
index-only scans to return wrong answers.
If we make the initially-called function return the table physical-size
estimate, acquire_inherited_sample_rows will be able to use that to
allocate numbers of samples among child tables, when the day comes that
we want to support foreign tables in inheritance trees.
ANALYZE now accepts foreign tables and allows the table's FDW to control
how the sample rows are collected. (But only manual ANALYZEs will touch
foreign tables, for the moment, since among other things it's not very
clear how to handle remote permissions checks in an auto-analyze.)
contrib/file_fdw is extended to support this.
Etsuro Fujita, reviewed by Shigeru Hanada, some further tweaking by me.
Currently, the only way to see the numbers this gathers is via
EXPLAIN (ANALYZE, BUFFERS), but the plan is to add visibility through
the stats collector and pg_stat_statements in subsequent patches.
Ants Aasma, reviewed by Greg Smith, with some further changes by me.
It used to be case that lazy vacuum could call this function with only
a shared lock on the buffer, but neither lazy vacuum nor any other
code path does that any more. Simplify the code accordingly and clean
up some related, obsolete comments.
The COPY documentation says "COPY FROM matches the input against the null
string before removing backslashes". It is therefore reasonable to presume
that null markers like E'\\0' will work ... and they did, until someone put
the tests in the wrong order during microoptimization-driven rewrites.
Since then, we've been failing if the null marker is something that would
de-escape to an invalidly-encoded string. Since null markers generally
need to be something that can't appear in the data, this represents a
nontrivial loss of functionality; surprising nobody noticed it earlier.
Per report from Jeff Davis. Backpatch to 8.4 where this got broken.
setlocale() accepts locale name "" as meaning "the locale specified by the
process's environment variables". Historically we've accepted that for
Postgres' locale settings, too. However, it's fairly unsafe to store an
empty string in a new database's pg_database.datcollate or datctype fields,
because then the interpretation could vary across postmaster restarts,
possibly resulting in index corruption and other unpleasantness.
Instead, we should expand "" to whatever it means at the moment of calling
CREATE DATABASE, which we can do by saving the value returned by
setlocale().
For consistency, make initdb set up the initial lc_xxx parameter values the
same way. initdb was already doing the right thing for empty locale names,
but it did not replace non-empty names with setlocale results. On a
platform where setlocale chooses to canonicalize the spellings of locale
names, this would result in annoying inconsistency. (It seems that popular
implementations of setlocale don't do such canonicalization, which is a
pity, but the POSIX spec certainly allows it to be done.) The same risk
of inconsistency leads me to not venture back-patching this, although it
could certainly be seen as a longstanding bug.
Per report from Jeff Davis, though this is not his proposed patch.
Making this operation look like a utility statement seems generally a good
idea, and particularly so in light of the desire to provide command
triggers for utility statements. The original choice of representing it as
SELECT with an IntoClause appendage had metastasized into rather a lot of
places, unfortunately, so that this patch is a great deal more complicated
than one might at first expect.
In particular, keeping EXPLAIN working for SELECT INTO and CREATE TABLE AS
subcommands required restructuring some EXPLAIN-related APIs. Add-on code
that calls ExplainOnePlan or ExplainOneUtility, or uses
ExplainOneQuery_hook, will need adjustment.
Also, the cases PREPARE ... SELECT INTO and CREATE RULE ... SELECT INTO,
which formerly were accepted though undocumented, are no longer accepted.
The PREPARE case can be replaced with use of CREATE TABLE AS EXECUTE.
The CREATE RULE case doesn't seem to have much real-world use (since the
rule would work only once before failing with "table already exists"),
so we'll not bother with that one.
Both SELECT INTO and CREATE TABLE AS still return a command tag of
"SELECT nnnn". There was some discussion of returning "CREATE TABLE nnnn",
but for the moment backwards compatibility wins the day.
Andres Freund and Tom Lane
This is for tools such as Coverity that don't know that the grammar
enforces that the case of not having a relation (but instead a query)
cannot happen in the FROM case.
This allows loadable modules to get control at drop time, perhaps for the
purpose of performing additional security checks or to log the event.
The initial purpose of this code is to support sepgsql, but other
applications should be possible as well.
KaiGai Kohei, reviewed by me.
Phil Sorber reported that a rewriting ALTER TABLE within an extension
update script failed, because it creates and then drops a placeholder
table; the drop was being disallowed because the table was marked as an
extension member. We could hack that specific case but it seems likely
that there might be related cases now or in the future, so the most
practical solution seems to be to create an exception to the general rule
that extension member objects can only be dropped by dropping the owning
extension. To wit: if the DROP is issued within the extension's own
creation or update scripts, we'll allow it, implicitly performing an
"ALTER EXTENSION DROP object" first. This will simplify cases such as
extension downgrade scripts anyway.
No docs change since we don't seem to have documented the idea that you
would need ALTER EXTENSION DROP for such an action to begin with.
Also, arrange for explicitly temporary tables to not get linked as
extension members in the first place, and the same for the magic
pg_temp_nnn schemas that are created to hold them. This prevents assorted
unpleasant results if an extension script creates a temp table: the forced
drop at session end would either fail or remove the entire extension, and
neither of those outcomes is desirable. Note that this doesn't fix the
ALTER TABLE scenario, since the placeholder table is not temp (unless the
table being rewritten is).
Back-patch to 9.1.
This patch improves selectivity estimation for the array <@, &&, and @>
(containment and overlaps) operators. It enables collection of statistics
about individual array element values by ANALYZE, and introduces
operator-specific estimators that use these stats. In addition,
ScalarArrayOpExpr constructs of the forms "const = ANY/ALL (array_column)"
and "const <> ANY/ALL (array_column)" are estimated by treating them as
variants of the containment operators.
Since we still collect scalar-style stats about the array values as a
whole, the pg_stats view is expanded to show both these stats and the
array-style stats in separate columns. This creates an incompatible change
in how stats for tsvector columns are displayed in pg_stats: the stats
about lexemes are now displayed in the array-related columns instead of the
original scalar-related columns.
There are a few loose ends here, notably that it'd be nice to be able to
suppress either the scalar-style stats or the array-element stats for
columns for which they're not useful. But the patch is in good enough
shape to commit for wider testing.
Alexander Korotkov, reviewed by Noah Misch and Nathan Boley
We already skip rewriting the table in these cases, but we still force a
whole table scan to validate the data. This can be skipped, and thus
we can make the whole ALTER TABLE operation just do some catalog touches
instead of scanning the table, when these two conditions hold:
(a) Old and new pg_constraint.conpfeqop match exactly. This is actually
stronger than needed; we could loosen things by way of operator
families, but it'd require a lot more effort.
(b) The functions, if any, implementing a cast from the foreign type to
the primary opcintype are the same. For this purpose, we can consider a
binary coercion equivalent to an exact type match. When the opcintype
is polymorphic, require that the old and new foreign types match
exactly. (Since ri_triggers.c does use the executor, the stronger check
for polymorphic types is no mere future-proofing. However, no core type
exercises its necessity.)
Author: Noah Misch
Committer's note: catalog version bumped due to change of the Constraint
node. I can't actually find any way to have such a node in a stored
rule, but given that we have "out" support for them, better be safe.
Claiming that the typevar argument to DefineCompositeType() is const
was a plain lie. A similar case in DefineVirtualRelation() was
already changed in passing in commit 1575fbcb. Also clean up the now
unnecessary casts that used to cast away the const.
This check was overlooked when we added function execute permissions to the
system years ago. For an ordinary trigger function it's not a big deal,
since trigger functions execute with the permissions of the table owner,
so they couldn't do anything the user issuing the CREATE TRIGGER couldn't
have done anyway. However, if a trigger function is SECURITY DEFINER,
that is not the case. The lack of checking would allow another user to
install it on his own table and then invoke it with, essentially, forged
input data; which the trigger function is unlikely to realize, so it might
do something undesirable, for instance insert false entries in an audit log
table.
Reported by Dinesh Kumar, patch by Robert Haas
Security: CVE-2012-0866
This extends the changes of commit 6252c4f9e2
so that we run the cleanup hook earlier for failure cases as well as
success cases. As before, the point is to avoid an assertion failure from
an Assert I added in commit a874fe7b4c, which
was meant to check that no user-written code can be called during portal
cleanup. This fixes a case reported by Pavan Deolasee in which the Assert
could be triggered during backend exit (see the new regression test case),
and also prevents the possibility that the cleanup hook is run after
portions of the portal's state have already been recycled. That doesn't
really matter in current usage, but it foreseeably could matter in the
future.
Back-patch to 9.1 where the Assert in question was added.
We don't normally allow quals to be pushed down into a view created
with the security_barrier option, but functions without side effects
are an exception: they're OK. This allows much better performance in
common cases, such as when using an equality operator (that might
even be indexable).
There is an outstanding issue here with the CREATE FUNCTION / ALTER
FUNCTION syntax: there's no way to use ALTER FUNCTION to unset the
leakproof flag. But I'm committing this as-is so that it doesn't
have to be rebased again; we can fix up the grammar in a future
commit.
KaiGai Kohei, with some wordsmithing by me.
Sometimes it may be useful to get actual row counts out of EXPLAIN
(ANALYZE) without paying the cost of timing every node entry/exit.
With this patch, you can say EXPLAIN (ANALYZE, TIMING OFF) to get that.
Tomas Vondra, reviewed by Eric Theise, with minor doc changes by me.
Although we will not even issue an XLOG_TBLSPC_DROP WAL record unless
removal of the tablespace's directories succeeds, that does not guarantee
that the same operation will succeed during WAL replay. Foreseeable
reasons for it to fail include temp files created in the tablespace by Hot
Standby backends, wrong directory permissions on a standby server, etc etc.
The original coding threw ERROR if replay failed to remove the directories,
but that is a serious overreaction. Throwing an error aborts recovery,
and worse means that manual intervention will be needed to get the database
to start again, since otherwise the same error will recur on subsequent
attempts to replay the same WAL record. And the consequence of failing to
remove the directories is only that some probably-small amount of disk
space is wasted, so it hardly seems justified to throw an error.
Accordingly, arrange to report such failures as LOG messages and keep going
when a failure occurs during replay.
Back-patch to 9.0 where Hot Standby was introduced. In principle such
problems can occur in earlier releases, but Hot Standby increases the odds
of trouble significantly. Given the lack of field reports of such issues,
I'm satisfied with patching back as far as the patch applies easily.
RestoreBkpBlocks was in the habit of zeroing and refilling the target
buffer; which was perfectly safe when the code was written, but is unsafe
during Hot Standby operation. The reason is that we have coding rules
that allow backends to continue accessing a tuple in a heap relation while
holding only a pin on its buffer. Such a backend could see transiently
zeroed data, if WAL replay had occasion to change other data on the page.
This has been shown to be the cause of bug #6425 from Duncan Rance (who
deserves kudos for developing a sufficiently-reproducible test case) as
well as Bridget Frey's re-report of bug #6200. It most likely explains the
original report as well, though we don't yet have confirmation of that.
To fix, change the code so that only bytes that are supposed to change will
change, even transiently. This actually saves cycles in RestoreBkpBlocks,
since it's not writing the same bytes twice.
Also fix seq_redo, which has the same disease, though it has to work a bit
harder to meet the requirement.
So far as I can tell, no other WAL replay routines have this type of bug.
In particular, the index-related replay routines, which would certainly be
broken if they had to meet the same standard, are not at risk because we
do not have coding rules that allow access to an index page when not
holding a buffer lock on it.
Back-patch to 9.0 where Hot Standby was added.
Like the XML data type, we simply store JSON data as text, after checking
that it is valid. More complex operations such as canonicalization and
comparison may come later, but this is enough for not.
There are a few open issues here, such as whether we should attempt to
detect UTF-8 surrogate pairs represented as \uXXXX\uYYYY, but this gets
the basic framework in place.
When default_text_search_config, default_tablespace, or temp_tablespaces
setting is set per-user or per-database, with an "ALTER USER/DATABASE SET
..." statement, don't throw an error if the text search configuration or
tablespace does not exist. In case of text search configuration, even if
it doesn't exist in the current database, it might exist in another
database, where the setting is intended to have its effect. This behavior
is now the same as search_path's.
Tablespaces are cluster-wide, so the same argument doesn't hold for
tablespaces, but there's a problem with pg_dumpall: it dumps "ALTER USER
SET ..." statements before the "CREATE TABLESPACE" statements. Arguably
that's pg_dumpall's fault - it should dump the statements in such an order
that the tablespace is created first and then the "ALTER USER SET
default_tablespace ..." statements after that - but it seems better to be
consistent with search_path and default_text_search_config anyway. Besides,
you could still create a dump that throws an error, by creating the
tablespace, running "ALTER USER SET default_tablespace", then dropping the
tablespace and running pg_dumpall on that.
Backpatch to all supported versions.
This has been the behavior already in most cases, but through
omission, ALTER DOMAIN / OWNER TO and ALTER DOMAIN / SET SCHEMA would
silently work on non-domain types as well.
We now use the same error message for ALTER TABLE .. ADD COLUMN or
ALTER TABLE .. RENAME COLUMN that we do for CREATE TABLE. The old
message was accurate, but might be confusing to users not aware of our
system columns.
Vik Reykja, with some changes by me, and further proofreading by Tom Lane
This doesn't do anything useful just yet, but is intended as supporting
infrastructure for allowing sepgsql to sensibly check DROP permissions.
KaiGai Kohei and Robert Haas
Rip out a regression test that doesn't play well with settings put in
place by the build farm, and rewrite the code in CheckIndexCompatible
in a hopefully more transparent style.
This gives up the "don't rewrite the index" behavior in a couple of
relatively unimportant cases, such as changing between an array type
and an unconstrained domain over that array type, in return for
making this code more future-proof.
Noah Misch
This reports the depth level of triggers currently in execution, or zero
if not called from inside a trigger.
No catversion bump in this patch, but you have to initdb if you want
access to the new function.
Author: Kevin Grittner
When creating a child table, or when attaching an existing table as
child of another, we must not allow inheritable constraints to be
merged with non-inheritable ones, because then grandchildren would not
properly get the constraint. This would violate the grandparent's
expectations.
Bugs noted by Robert Haas.
Author: Nikhil Sontakke
In the previous coding, it was possible for a relation to be created
via CREATE TABLE, CREATE VIEW, CREATE SEQUENCE, CREATE FOREIGN TABLE,
etc. in a schema while that schema was meanwhile being concurrently
dropped. This led to a pg_class entry with an invalid relnamespace
value. The same problem could occur if a relation was moved using
ALTER .. SET SCHEMA while the target schema was being concurrently
dropped. This patch prevents both of those scenarios by locking the
schema to which the relation is being added using AccessShareLock,
which conflicts with the AccessExclusiveLock taken by DROP.
As a desirable side effect, this also prevents the use of CREATE OR
REPLACE VIEW to queue for an AccessExclusiveLock on a relation on which
you have no rights: that will now fail immediately with a permissions
error, before trying to obtain a lock.
We need similar protection for all other object types, but as everything
other than relations uses a slightly different set of code paths, I'm
leaving that for a separate commit.
Original complaint (as far as I could find) about CREATE by Nikhil
Sontakke; risk for ALTER .. SET SCHEMA pointed out by Tom Lane;
further details by Dan Farina; patch by me; review by Hitoshi Harada.
superuser doesn't have doesn't make much sense, as a superuser can do
whatever he wants through other means, anyway. So instead of granting
replication privilege to superusers in CREATE USER time by default, allow
replication connection from superusers whether or not they have the
replication privilege.
Patch by Noah Misch, per discussion on bug report #6264
As noted by Tom Lane, the previous coding in this area, which I
introduced in commit bbb6e559c4, was
poorly tested and caused the vacuum's second heap to go into what would
have been an infinite loop but for the fact that it eventually caused a
memory allocation failure. This version seems to work better.
In commit 7b0d0e9356, I made CLUSTER and
VACUUM FULL try to preserve toast value OIDs from the original toast table
to the new one. However, if we have to copy both live and recently-dead
versions of a row that has a toasted column, those versions may well
reference the same toast value with the same OID. The patch then led to
duplicate-key failures as we tried to insert the toast value twice with the
same OID. (The previous behavior was not very desirable either, since it
would have silently inserted the same value twice with different OIDs.
That wastes space, but what's worse is that the toast values inserted for
already-dead heap rows would not be reclaimed by subsequent ordinary
VACUUMs, since they go into the new toast table marked live not deleted.)
To fix, check if the copied OID already exists in the new toast table, and
if so, assume that it stores the desired value. This is reasonably safe
since the only case where we will copy an OID from a previous toast pointer
is when toast_insert_or_update was given that toast pointer and so we just
pulled the data from the old table; if we got two different values that way
then we have big problems anyway. We do have to assume that no other
backend is inserting items into the new toast table concurrently, but
that's surely safe for CLUSTER and VACUUM FULL.
Per bug #6393 from Maxim Boguk. Back-patch to 9.0, same as the previous
patch.
ALTER TABLE (and ALTER VIEW, ALTER SEQUENCE, etc.) now use a
RangeVarGetRelid callback to check permissions before acquiring a table
lock. We also now use the same callback for all forms of ALTER TABLE,
rather than having separate, almost-identical callbacks for ALTER TABLE
.. SET SCHEMA and ALTER TABLE .. RENAME, and no callback at all for
everything else.
I went ahead and changed the code so that no form of ALTER TABLE works
on foreign tables; you must use ALTER FOREIGN TABLE instead. In 9.1,
it was possible to use ALTER TABLE .. SET SCHEMA or ALTER TABLE ..
RENAME on a foreign table, but not any other form of ALTER TABLE, which
did not seem terribly useful or consistent.
Patch by me; review by Noah Misch.
ALTER DOMAIN / DROP CONSTRAINT on a nonexistent constraint name did
not report any error. Now it reports an error. The IF EXISTS option
was added to get the usual behavior of ignoring nonexistent objects to
drop.
When a view is marked as a security barrier, it will not be pulled up
into the containing query, and no quals will be pushed down into it,
so that no function or operator chosen by the user can be applied to
rows not exposed by the view. Views not configured with this
option cannot provide robust row-level security, but will perform far
better.
Patch by KaiGai Kohei; original problem report by Heikki Linnakangas
(in October 2009!). Review (in earlier versions) by Noah Misch and
others. Design advice by Tom Lane and myself. Further review and
cleanup by me.
You could already rename domains using ALTER TYPE, but with this new
command it is more consistent with how other commands treat domains as
a subcategory of types.
We forgot to modify column ACLs, so privileges were still shown as having
been granted by the old owner. This meant that neither the new owner nor
a superuser could revoke the now-untraceable-to-table-owner permissions.
Per bug #6350 from Marc Balmer.
This has been wrong since column ACLs were added, so back-patch to 8.4.
In the previous coding, a user could queue up for an AccessExclusiveLock
on a table they did not have permission to cluster, thus potentially
interfering with access by authorized users who got stuck waiting behind
the AccessExclusiveLock. This approach avoids that. cluster() has the
same permissions-checking requirements as REINDEX TABLE, so this commit
moves the now-shared callback to tablecmds.c and renames it, per
discussion with Noah Misch.
When a PORTAL_ONE_SELECT query is executed, we can opportunistically
reuse the parse/plan shot for the execution phase. This cuts down the
number of snapshots per simple query from 2 to 1 for the simple
protocol, and 3 to 2 for the extended protocol. Since we are only
reusing a snapshot taken early in the processing of the same protocol
message, the change shouldn't be user-visible, except that the remote
possibility of the planning and execution snapshots being different is
eliminated.
Note that this change does not make it safe to assume that the parse/plan
snapshot will certainly be reused; that will currently only happen if
PortalStart() decides to use the PORTAL_ONE_SELECT strategy. It might
be worth trying to provide some stronger guarantees here in the future,
but for now we don't.
Patch by me; review by Dimitri Fontaine.
This adds support for the more or less SQL-conforming USAGE privilege
on types and domains. The intent is to be able restrict which users
can create dependencies on types, which restricts the way in which
owners can alter types.
reviewed by Yeb Havinga
This makes them enforceable only on the parent table, not on children
tables. This is useful in various situations, per discussion involving
people bitten by the restrictive behavior introduced in 8.4.
Message-Id:
8762mp93iw.fsf@comcast.netCAFaPBrSMMpubkGf4zcRL_YL-AERUbYF_-ZNNYfb3CVwwEqc9TQ@mail.gmail.com
Authors: Nikhil Sontakke, Alex Hunsaker
Reviewed by Robert Haas and myself
If the referrent of a name changes while we're waiting for the lock,
we must recheck permissons. We also now check the relkind before
locking, since it's easy to do that long the way.
Patch by me; review by Noah Misch.
Previously, renaming a table, sequence, view, index, foreign table,
column, or trigger checked permissions before locking the object, which
meant that if permissions were revoked during the lock wait, we would
still allow the operation. Similarly, if the original object is dropped
and a new one with the same name is created, the operation will be allowed
if we had permissions on the old object; the permissions on the new
object don't matter. All this is now fixed.
Along the way, attempting to rename a trigger on a foreign table now gives
the same error message as trying to create one there in the first place
(i.e. that it's not a table or view) rather than simply stating that no
trigger by that name exists.
Patch by me; review by Noah Misch.
Instead, add a function pg_tablespace_location(oid) used to return
the same information, and do this by reading the symbolic link.
Doing it this way makes it possible to relocate a tablespace when the
database is down by simply changing the symbolic link.
This patch creates an API whereby a btree index opclass can optionally
provide non-SQL-callable support functions for sorting. In the initial
patch, we only use this to provide a directly-callable comparator function,
which can be invoked with a bit less overhead than the traditional
SQL-callable comparator. While that should be of value in itself, the real
reason for doing this is to provide a datatype-extensible framework for
more aggressive optimizations, as in Peter Geoghegan's recent work.
Robert Haas and Tom Lane
In the previous coding, callers were faced with an awkward choice:
look up the name, do permissions checks, and then lock the table; or
look up the name, lock the table, and then do permissions checks.
The first choice was wrong because the results of the name lookup
and permissions checks might be out-of-date by the time the table
lock was acquired, while the second allowed a user with no privileges
to interfere with access to a table by users who do have privileges
(e.g. if a malicious backend queues up for an AccessExclusiveLock on
a table on which AccessShareLock is already held, further attempts
to access the table will be blocked until the AccessExclusiveLock
is obtained and the malicious backend's transaction rolls back).
To fix, allow callers of RangeVarGetRelid() to pass a callback which
gets executed after performing the name lookup but before acquiring
the relation lock. If the name lookup is retried (because
invalidation messages are received), the callback will be re-executed
as well, so we get the best of both worlds. RangeVarGetRelid() is
renamed to RangeVarGetRelidExtended(); callers not wishing to supply
a callback can continue to invoke it as RangeVarGetRelid(), which is
now a macro. Since the only one caller that uses nowait = true now
passes a callback anyway, the RangeVarGetRelid() macro defaults nowait
as well. The callback can also be used for supplemental locking - for
example, REINDEX INDEX needs to acquire the table lock before the index
lock to reduce deadlock possibilities.
There's a lot more work to be done here to fix all the cases where this
can be a problem, but this commit provides the general infrastructure
and fixes the following specific cases: REINDEX INDEX, REINDEX TABLE,
LOCK TABLE, and and DROP TABLE/INDEX/SEQUENCE/VIEW/FOREIGN TABLE.
Per discussion with Noah Misch and Alvaro Herrera.
While the deletion in itself wouldn't break things, any further creation
of objects in the script would result in dangling pg_depend entries being
added by recordDependencyOnCurrentExtension(). An example from Phil
Sorber convinced me that this is just barely likely enough to be worth
expending a couple lines of code to defend against. The resulting error
message might be confusing, but it's better than leaving corrupted catalog
contents for the user to deal with.
This adds some I/O stats to the logging of autovacuum (when the
operation takes long enough that log_autovacuum_min_duration causes it
to be logged), so that it is easier to tune. Notably, it adds buffer
I/O counts (hits, misses, dirtied) and read and write rate.
Authors: Greg Smith and Noah Misch
This speeds up snapshot-taking and reduces ProcArrayLock contention.
Also, the PGPROC (and PGXACT) structures used by two-phase commit are
now allocated as part of the main array, rather than in a separate
array, and we keep ProcArray sorted in pointer order. These changes
are intended to minimize the number of cache lines that must be pulled
in to take a snapshot, and testing shows a substantial increase in
performance on both read and write workloads at high concurrencies.
Pavan Deolasee, Heikki Linnakangas, Robert Haas
Since range types can be created by non-superusers, we need to consider
their permissions. Ideally we'd check this when the type is used, not
when it's created, but that seems like much more trouble than it's worth.
The existing restriction that the support functions be immutable already
prevents most cases where an unauthorized call to a function might be
thought a security issue, and the fact that the user has no access to
the results of the system's calls to subtype_diff closes off the other
plausible reason for concern. So this check is basically pro-forma,
but let's make it anyway.
It's not clear that a per-datatype typanalyze function would be any more
useful than a generic typanalyze for ranges. What *is* clear is that
letting unprivileged users select typanalyze functions is a crash risk or
worse. So remove the option from CREATE TYPE AS RANGE, and instead put in
a generic typanalyze function for ranges. The generic function does
nothing as yet, but hopefully we'll improve that before 9.2 release.
Per discussion, the zero-argument forms aren't really worth the catalog
space (just write 'empty' instead). The one-argument forms have some use,
but they also have a serious problem with looking too much like functional
cast notation; to the point where in many real use-cases, the parser would
misinterpret what was wanted.
Committing this as a separate patch, with the thought that we might want
to revert part or all of it if we can think of some way around the cast
ambiguity.
Fix up some infelicitous coding in DefineRange, and add some missing error
checks. Rearrange operator strategy number assignments for GiST anyrange
opclass so that they don't make such a mess of opr_sanity's table of
operator names associated with different strategy numbers. Assign
hopefully-temporary selectivity estimators to range operators that didn't
have one --- poor as the estimates are, they're still a lot better than the
default 0.5 estimate, and they'll shut up the opr_sanity test that wants to
see selectivity estimators on all built-in operators.
This gets rid of an impressive amount of duplicative code, with only
minimal behavior changes. DROP FOREIGN DATA WRAPPER now requires object
ownership rather than superuser privileges, matching the documentation
we already have. We also eliminate the historical warning about dropping
a built-in function as unuseful. All operations are now performed in the
same order for all object types handled by dropcmds.c.
KaiGai Kohei, with minor revisions by me
A very long time ago, language names were specified as literals rather
than identifiers, so this code was added to do case-folding. But that
style has ben deprecated for many years so this isn't needed any more.
Language names will still be downcased when specified as unquoted
identifiers, but quoted identifiers or the old style using string
literals will be left as-is.
A range type whose element type has 'd' alignment must have 'd' alignment
itself, else there is no guarantee that the element value can be used
in-place. (Because range_deserialize uses att_align_pointer which forcibly
aligns the given pointer, violations of this rule did not lead to SIGBUS
but rather to garbage data being extracted, as in one of the added
regression test cases.)
Also, you can't put a toast pointer inside a range datum, since the
referenced value could disappear with the range datum still present.
For consistency with the handling of arrays and records, I also forced
decompression of in-line-compressed bound values. It would work to store
them as-is, but our policy is to avoid situations that might result in
double compression.
Add assorted regression tests for this, and bump catversion because of
fixes to built-in pg_type entries.
Also some marginal cleanup of inconsistent/unnecessary error checks.
This greatly reduces the WAL volume, especially when the table is narrow.
The overhead of locking the heap page is also reduced. Reduced WAL traffic
also makes it scale a lot better, if you run multiple COPY processes at
the same time.
In a regular VACUUM, it's OK to skip pages for which a cleanup lock
isn't immediately available; the next VACUUM will deal with them. If
we're scanning the entire relation to advance relfrozenxid, we might
need to wait, but only if there are tuples on the page that actually
require freezing. These changes should greatly reduce the incidence
of of vacuum processes getting "stuck".
Simon Riggs and Robert Haas
Use names like "RI_ConstraintTrigger_a_NNNN" for FK action triggers and
"RI_ConstraintTrigger_c_NNNN" for FK check triggers. This ensures the
action trigger fires first in self-referential cases where the very same
row update fires both an action and a check trigger. This change provides
a non-probabilistic solution for bug #6268, at the risk that it could break
client code that is making assumptions about the exact names assigned to
auto-generated FK triggers. Hence, change this in HEAD only. No need for
forced initdb since old triggers continue to work fine.
When a foreign-key constraint references another column of the same table,
row updates will queue both the PK's ON UPDATE action and the FK's CHECK
action in the same event. The ON UPDATE action must execute first, else
the CHECK will check a non-final state of the row and possibly throw an
inappropriate error, as seen in bug #6268 from Roman Lytovchenko.
Now, the firing order of multiple triggers for the same event is determined
by the sort order of their pg_trigger.tgnames, and the auto-generated names
we use for FK triggers are "RI_ConstraintTrigger_NNNN" where NNNN is the
trigger OID. So most of the time the firing order is the same as creation
order, and so rearranging the creation order fixes it.
This patch will fail to fix the problem if the OID counter wraps around or
adds a decimal digit (eg, from 99999 to 100000) while we are creating the
triggers for an FK constraint. Given the small odds of that, and the low
usage of self-referential FKs, we'll live with that solution in the back
branches. A better fix is to change the auto-generated names for FK
triggers, but it seems unwise to do that in stable branches because there
may be client code that depends on the naming convention. We'll fix it
that way in HEAD in a separate patch.
Back-patch to all supported branches, since this bug has existed for a long
time.
Turns out that use of ShareUpdateExclusiveLock or ShareRowExclusiveLock
to protect DDL changes had gotten copied into several places that were
not touched by either of Simon's original patches for the feature, and
thus neither he nor I thought to revert them. (Indeed, it appears that
two of these uses were committed *after* the reversion, which just goes
to show that git merging is no panacea.) Change these places to use
AccessExclusiveLock again. If we ever manage to resurrect that feature,
we're going to have to think a bit harder about how to keep lock level
usage in sync for DDL operations that aren't within the AlterTable
infrastructure.
Two of these bugs are only in HEAD, but one is in the 9.1 branch too.
Alvaro found one of them, I found the other two.
Essentially, the "IF EXISTS" portion was being ignored, and an error
thrown anyway if the opfamily did not exist.
I broke this in commit fd1843ff8979c0461fb3f1a9eab61140c977e32d; so
backpatch to 9.1.X.
Report and diagnosis by KaiGai Kohei.
This gets rid of a significant amount of duplicative code.
KaiGai Kohei, reviewed in earlier versions by Dimitri Fontaine, with
further review and cleanup by me.
This is merely an exercise in satisfying pedants, not a bug fix, because
in every case we were checking for failure later with ferror(), or else
there was nothing useful to be done about a failure anyway. Document
the latter cases.
Add a column pg_class.relallvisible to remember the number of pages that
were all-visible according to the visibility map as of the last VACUUM
(or ANALYZE, or some other operations that update pg_class.relpages).
Use relallvisible/relpages, instead of an arbitrary constant, to estimate
how many heap page fetches can be avoided during an index-only scan.
This is pretty primitive and will no doubt see refinements once we've
acquired more field experience with the index-only scan mechanism, but
it's way better than using a constant.
Note: I had to adjust an underspecified query in the window.sql regression
test, because it was changing answers when the plan changed to use an
index-only scan. Some of the adjacent tests perhaps should be adjusted
as well, but I didn't do that here.
We have seen one too many reports of people trying to use 9.1 extension
files in the old-fashioned way of sourcing them in psql. Not only does
that usually not work (due to failure to substitute for MODULE_PATHNAME
and/or @extschema@), but if it did work they'd get a collection of loose
objects not an extension. To prevent this, insert an \echo ... \quit
line that prints a suitable error message into each extension script file,
and teach commands/extension.c to ignore lines starting with \echo.
That should not only prevent any adverse consequences of loading a script
file the wrong way, but make it crystal clear to users that they need to
do it differently now.
Tom Lane, following an idea of Andrew Dunstan's. Back-patch into 9.1
... there is not going to be much value in this if we wait till 9.2.
This commit changes index-only scans so that data is read directly from the
index tuple without first generating a faux heap tuple. The only immediate
benefit is that indexes on system columns (such as OID) can be used in
index-only scans, but this is necessary infrastructure if we are ever to
support index-only scans on expression indexes. The executor is now ready
for that, though the planner still needs substantial work to recognize
the possibility.
To do this, Vars in index-only plan nodes have to refer to index columns
not heap columns. I introduced a new special varno, INDEX_VAR, to mark
such Vars to avoid confusion. (In passing, this commit renames the two
existing special varnos to OUTER_VAR and INNER_VAR.) This allows
ruleutils.c to handle them with logic similar to what we use for subplan
reference Vars.
Since index-only scans are now fundamentally different from regular
indexscans so far as their expression subtrees are concerned, I also chose
to change them to have their own plan node type (and hence, their own
executor source file).
When I consolidated two copies of the HOT-chain search logic in commit
4da99ea423, I introduced a behavior
change: the old code wouldn't necessarily traverse the entire chain,
if the most recently returned tuple were updated while the HOT chain
traversal is in progress. The new behavior seems more correct, but
unfortunately, the code here relies on a scan with SnapshotNow failing
to see its own updates. That seems pretty shaky even with the old HOT
chain traversal behavior, since there's no guarantee that these
updates will always be HOT, but it's trivial to broke a failure with
the new HOT search logic. Fix by updating just the first matching
pg_constraint tuple, rather than all of them, since there should be
only one anyway. But since nobody has reproduced this failure on older
versions, no back-patch for now.
Report and test case by Alex Hunsaker; tablecmds.c changes by me.
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
CREATE EXTENSION needs to transiently set search_path, as well as
client_min_messages and log_min_messages. We were doing this by the
expedient of saving the current string value of each variable, doing a
SET LOCAL, and then doing another SET LOCAL with the previous value at
the end of the command. This is a bit expensive though, and it also fails
badly if there is anything funny about the existing search_path value,
as seen in a recent report from Roger Niederland. Fortunately, there's a
much better way, which is to piggyback on the GUC infrastructure previously
developed for functions with SET options. We just open a new GUC nesting
level, do our assignments with GUC_ACTION_SAVE, and then close the nesting
level when done. This automatically restores the prior settings without a
re-parsing pass, so (in principle anyway) there can't be an error. And
guc.c still takes care of cleanup in event of an error abort.
The CREATE EXTENSION code for this was modeled on some much older code in
ri_triggers.c, which I also changed to use the better method, even though
there wasn't really much risk of failure there. Also improve the comments
in guc.c to reflect this additional usage.
Arrange for any problems with pre-existing settings to be reported as
WARNING not ERROR, so that we don't undesirably abort the loading of the
incoming add-on module. The bad setting is just discarded, as though it
had never been applied at all. (This requires a change in the API of
set_config_option. After some thought I decided the most potentially
useful addition was to allow callers to just pass in a desired elevel.)
Arrange to restore the complete stacked state of the variable, rather than
cheesily reinstalling only the active value. This ensures that custom GUCs
will behave unsurprisingly even when the module loading operation occurs
within nested subtransactions that have changed the active value. Since a
module load could occur as a result of, eg, a PL function call, this is not
an unlikely scenario.
Previously, the code assumed that the only possible action to take was
to delete files behind a certain cutoff point. The async notify code
was already a crock: it used a different "pagePrecedes" function for
truncation than for regular operation. By allowing it to pass a
callback to SlruScanDirectory it can do cleanly exactly what it needs to
do.
The clog.c code also had its own use for SlruScanDirectory, which is
made a bit simpler with this.
This patch has two distinct purposes: to report multiple problems in
postgresql.conf rather than always bailing out after the first one,
and to change the policy for whether changes are applied when there are
unrelated errors in postgresql.conf.
Formerly the policy was to apply no changes if any errors could be
detected, but that had a significant consistency problem, because in some
cases specific values might be seen as valid by some processes but invalid
by others. This meant that the latter processes would fail to adopt
changes in other parameters even though the former processes had done so.
The new policy is that during SIGHUP, the file is rejected as a whole
if there are any errors in the "name = value" syntax, or if any lines
attempt to set nonexistent built-in parameters, or if any lines attempt
to set custom parameters whose prefix is not listed in (the new value of)
custom_variable_classes. These tests should always give the same results
in all processes, and provide what seems a reasonably robust defense
against loading values from badly corrupted config files. If these tests
pass, all processes will apply all settings that they individually see as
good, ignoring (but logging) any they don't.
In addition, the postmaster does not abandon reading a configuration file
after the first syntax error, but continues to read the file and report
syntax errors (up to a maximum of 100 syntax errors per file).
The postmaster will still refuse to start up if the configuration file
contains any errors at startup time, but these changes allow multiple
errors to be detected and reported before quitting.
Alexey Klyukin, reviewed by Andy Colson and av (Alexander ?)
with some additional hacking by Tom Lane
This provides information about the numbers of tuples that were visited
but not returned by table scans, as well as the numbers of join tuples
that were considered and discarded within a join plan node.
There is still some discussion going on about the best way to report counts
for outer-join situations, but I think most of what's in the patch would
not change if we revise that, so I'm going to go ahead and commit it as-is.
Documentation changes to follow (they weren't in the submitted patch
either).
Marko Tiikkaja, reviewed by Marc Cousin, somewhat revised by Tom
Rewrite plancache.c so that a "cached plan" (which is rather a misnomer
at this point) can support generation of custom, parameter-value-dependent
plans, and can make an intelligent choice between using custom plans and
the traditional generic-plan approach. The specific choice algorithm
implemented here can probably be improved in future, but this commit is
all about getting the mechanism in place, not the policy.
In addition, restructure the API to greatly reduce the amount of extraneous
data copying needed. The main compromise needed to make that possible was
to split the initial creation of a CachedPlanSource into two steps. It's
worth noting in particular that SPI_saveplan is now deprecated in favor of
SPI_keepplan, which accomplishes the same end result with zero data
copying, and no need to then spend even more cycles throwing away the
original SPIPlan. The risk of long-term memory leaks while manipulating
SPIPlans has also been greatly reduced. Most of this improvement is based
on use of the recently-added MemoryContextSetParent primitive.
This addresses only those cases that are easy to fix by adding or
moving a const qualifier or removing an unnecessary cast. There are
many more complicated cases remaining.
We were doing some amazingly complicated things in order to avoid running
the very expensive identify_system_timezone() procedure during GUC
initialization. But there is an obvious fix for that, which is to do it
once during initdb and have initdb install the system-specific default into
postgresql.conf, as it already does for most other GUC variables that need
system-environment-dependent defaults. This means that the timezone (and
log_timezone) settings no longer have any magic behavior in the server.
Per discussion.
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
Since the last couple of columns of pg_type are often NULL,
sizeof(FormData_pg_type) can be an overestimate of the actual size of the
tuple data part. Therefore memcpy'ing that much out of the catalog cache,
as analyze.c was doing, poses a small risk of copying past the end of
memory and incurring SIGSEGV. No such crash has been identified in the
field, but we've certainly seen the equivalent happen in other code paths,
so patch this one all the way back.
Per valgrind testing by Noah Misch, though this is not his proposed patch.
I chose to use SearchSysCacheCopy1 rather than inventing special-purpose
infrastructure for copying only the minimal part of a pg_type tuple.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
In the past, relhassubclass always remained true if a relation had ever had
child relations, even if the last subclass was long gone. While this had
only marginal performance implications in most cases, it was annoying, and
I'm now considering some planner changes that would raise the cost of a
false positive. It was previously impractical to fix this because of race
condition concerns. However, given the recent change that made tablecmds.c
take ShareExclusiveLock on relations that are gaining a child (commit
fbcf4b92aa), we can now allow ANALYZE to
clear the flag when it's no longer relevant. There is no additional
locking cost to do so, since ANALYZE takes ShareExclusiveLock anyway.
It is possible for VACUUM to scan no pages at all, if the visibility map
shows that all pages are all-visible. In this situation VACUUM has no new
information to report about the relation's tuple density, so it wasn't
changing pg_class.reltuples ... but it updated pg_class.relpages anyway.
That's wrong in general, since there is no evidence to justify changing the
density ratio reltuples/relpages, but it's particularly bad if the previous
state was relpages=reltuples=0, which means "unknown tuple density".
We just replaced "unknown" with "zero". ANALYZE would eventually recover
from this, but it could take a lot of repetitions of ANALYZE to do so if
the relation size is much larger than the maximum number of pages ANALYZE
will scan, because of the moving-average behavior introduced by commit
b4b6923e03.
The only known situation where we could have relpages=reltuples=0 and yet
the visibility map asserts everything's visible is immediately following
a pg_upgrade. It might be advisable for pg_upgrade to try to preserve the
relpages/reltuples statistics; but in any case this code is wrong on its
own terms, so fix it. Per report from Sergey Koposov.
Back-patch to 8.4, where the visibility map was introduced, same as the
previous change.
When creating a new schema for a non-relocatable extension, we neglected
to check whether the calling user has permission to create schemas.
That didn't matter in the original coding, since we had already checked
superuserness, but in the new dispensation where users need not be
superusers, we should check it. Use CreateSchemaCommand() rather than
calling NamespaceCreate() directly, so that we also enforce the rules
about reserved schema names.
Per complaint from KaiGai Kohei, though this isn't the same as his patch.
Due to tuple-slot mismanagement, evaluation of WHEN conditions for AFTER
ROW UPDATE triggers could crash if there had been a BEFORE ROW trigger
fired for the same update. Fix by not trying to overload the use of
estate->es_trig_tuple_slot. Per report from Yoran Heling.
Back-patch to 9.0, when trigger WHEN conditions were introduced.
This works around the problem that a catalog cache entry might contain a
toast pointer that we try to dereference just as a VACUUM FULL completes
on that catalog. We will see the sinval message on the cache entry when
we acquire lock on the toast table, but by that point we've already told
tuptoaster.c "here's the pointer to fetch", so it's difficult from a code
structural standpoint to update the pointer before we use it. Much less
painful to ensure that toast pointers are not invalidated in the first
place. We have to add a bit of code to deal with the case that a value
that previously wasn't toasted becomes so; but that should be a
seldom-exercised corner case, so the inefficiency shouldn't be significant.
Back-patch to 9.0. In prior versions, we didn't allow CLUSTER on system
catalogs, and VACUUM FULL didn't result in reassignment of toast OIDs, so
there was no problem.
When updating or deleting a system catalog tuple, it's necessary to acquire
RowExclusiveLock on the catalog before looking up the tuple; otherwise a
concurrent VACUUM FULL on the catalog might move the tuple to a different
TID before we can apply the update. Coding patterns that find the tuple
via a table scan aren't at risk here, but when obtaining the tuple from a
catalog cache, correct ordering is important; and several routines in
foreigncmds.c got it wrong. Noted while running the regression tests in
parallel with VACUUM FULL of assorted system catalogs.
For consistency I moved all the heap_open calls to the starts of their
functions, including a couple for which there was no actual bug.
Back-patch to 8.4 where foreigncmds.c was added.
Instead of entering them on transaction startup, we materialize them
only when someone wants to wait, which will occur only during CREATE
INDEX CONCURRENTLY. In Hot Standby mode, the startup process must also
be able to probe for conflicting VXID locks, but the lock need never be
fully materialized, because the startup process does not use the normal
lock wait mechanism. Since most VXID locks never need to touch the
lock manager partition locks, this can significantly reduce blocking
contention on read-heavy workloads.
Patch by me. Review by Jeff Davis.
The original implementation simply did nothing when replacing an existing
object during CREATE EXTENSION. The folly of this was exposed by a report
from Marc Munro: if the existing object belongs to another extension, we
are left in an inconsistent state. We should insist that the object does
not belong to another extension, and then add it to the current extension
if not already a member.
This requires a new shared catalog, pg_shseclabel.
Along the way, fix the security_label regression tests so that they
don't monkey with the labels of any pre-existing objects. This is
unlikely to matter in practice, since only the label for the "dummy"
provider was being manipulated. But this way still seems cleaner.
KaiGai Kohei, with fairly extensive hacking by me.
There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
Regular aggregate functions in combination with, or within the arguments
of, window functions are OK per spec; they have the semantics that the
aggregate output rows are computed and then we run the window functions
over that row set. (Thus, this combination is not really useful unless
there's a GROUP BY so that more than one aggregate output row is possible.)
The case without GROUP BY could fail, as recently reported by Jeff Davis,
because sloppy construction of the Agg node's targetlist resulted in extra
references to possibly-ungrouped Vars appearing outside the aggregate
function calls themselves. See the added regression test case for an
example.
Fixing this requires modifying the API of flatten_tlist and its underlying
function pull_var_clause. I chose to make pull_var_clause's API for
aggregates identical to what it was already doing for placeholders, since
the useful behaviors turn out to be the same (error, report node as-is, or
recurse into it). I also tightened the error checking in this area a bit:
if it was ever valid to see an uplevel Var, Aggref, or PlaceHolderVar here,
that was a long time ago, so complain instead of ignoring them.
Backpatch into 9.1. The failure exists in 8.4 and 9.0 as well, but seeing
that it only occurs in a basically-useless corner case, it doesn't seem
worth the risks of changing a function API in a minor release. There might
be third-party code using pull_var_clause.
In the previous coding, we would look up a relation in RangeVarGetRelid,
lock the resulting OID, and then AcceptInvalidationMessages(). While
this was sufficient to ensure that we noticed any changes to the
relation definition before building the relcache entry, it didn't
handle the possibility that the name we looked up no longer referenced
the same OID. This was particularly problematic in the case where a
table had been dropped and recreated: we'd latch on to the entry for
the old relation and fail later on. Now, we acquire the relation lock
inside RangeVarGetRelid, and retry the name lookup if we notice that
invalidation messages have been processed meanwhile. Many operations
that would previously have failed with an error in the presence of
concurrent DDL will now succeed.
There is a good deal of work remaining to be done here: many callers
of RangeVarGetRelid still pass NoLock for one reason or another. In
addition, nothing in this patch guards against the possibility that
the meaning of an unqualified name might change due to the creation
of a relation in a schema earlier in the user's search path than the
one where it was previously found. Furthermore, there's nothing at
all here to guard against similar race conditions for non-relations.
For all that, it's a start.
Noah Misch and Robert Haas
We were using GetConfigOption to collect the old value of each setting,
overlooking the possibility that it didn't exist yet. This does happen
in the case of adding a new entry within a custom variable class, as
exhibited in bug #6097 from Maxim Boguk.
To fix, add a missing_ok parameter to GetConfigOption, but only in 9.1
and HEAD --- it seems possible that some third-party code is using that
function, so changing its API in a minor release would cause problems.
In 9.0, create a near-duplicate function instead.
This is useful since a validator might want to require certain options
to be provided. The passed array is an empty text array in this case.
Per suggestion by Laurenz Albe, though this is not quite his patch.
The bug that caused this to be discovered is that the code was trying to
dereference a NULL or ill-defined pointer, as reported by Michael Mueller;
but what it was doing was wrong anyway, per Heikki.
This patch is Heikki's suggested fix.
Unlike the relistemp field which it replaced, relpersistence must be
set correctly quite early during the table creation process, as we
rely on it quite early on for a number of purposes, including security
checks. Normally, this is set based on whether the user enters CREATE
TABLE, CREATE UNLOGGED TABLE, or CREATE TEMPORARY TABLE, but a
relation may also be made implicitly temporary by creating it in
pg_temp. This patch fixes the handling of that case, and also
disables creation of unlogged tables in temporary tablespace (such
table indeed skip WAL-logging, but we reject an explicit
specification) and creation of relations in the temporary schemas of
other sessions (which is not very sensible, and didn't work right
anyway).
Report by Amit Khandekar.
This means that they can initially be added to a large existing table
without checking its initial contents, but new tuples must comply to
them; a separate pass invoked by ALTER TABLE / VALIDATE can verify
existing data and ensure it complies with the constraint, at which point
it is marked validated and becomes a normal part of the table ecosystem.
An non-validated CHECK constraint is ignored in the planner for
constraint_exclusion purposes; when validated, cached plans are
recomputed so that partitioning starts working right away.
This patch also enables domains to have unvalidated CHECK constraints
attached to them as well by way of ALTER DOMAIN / ADD CONSTRAINT / NOT
VALID, which can later be validated with ALTER DOMAIN / VALIDATE
CONSTRAINT.
Thanks to Thom Brown, Dean Rasheed and Jaime Casanova for the various
reviews, and Robert Hass for documentation wording improvement
suggestions.
This patch was sponsored by Enova Financial.
This involves two main changes from the previous behavior. First,
when we set a bit in the visibility map, emit a new WAL record of type
XLOG_HEAP2_VISIBLE. Replay sets the page-level PD_ALL_VISIBLE bit and
the visibility map bit. Second, when inserting, updating, or deleting
a tuple, we can no longer get away with clearing the visibility map
bit after releasing the lock on the corresponding heap page, because
an intervening crash might leave the visibility map bit set and the
page-level bit clear. Making this work requires a bit of interface
refactoring.
In passing, a few minor but related cleanups: change the test in
visibilitymap_set and visibilitymap_clear to throw an error if the
wrong page (or no page) is pinned, rather than silently doing nothing;
this case should never occur. Also, remove duplicate definitions of
InvalidXLogRecPtr.
Patch by me, review by Noah Misch.
Initially, we use this only to eliminate calls to the varchar()
function in cases where the length is not being reduced and, therefore,
the function call is equivalent to a RelabelType operation. The most
significant effect of this is that we can avoid a table rewrite when
changing a varchar(X) column to a varchar(Y) column, where Y > X.
Noah Misch, reviewed by me and Alexey Klyukin
Some callers were creating copies of tuple descriptors to pass to that
function, stating in code comments that it was necessary because it
modified the passed descriptor. Code inspection reveals this not to be
true, and indeed not all callers are passing copies in the first place.
So remove the extra ones and the misleading comments about this behavior
as well.
I mis-simplified the test where ANALYZE decided if it could get away
without doing anything: under the new regime, that's never allowed. Per
bug #6068 from Jeff Janes. Back-patch to 8.4, just like previous patch.
We had already converted most places to this style, but this patch gets the
last few that were still doing it the old way. The main advantage is that
this exposes a greppable name for each target column, rather than having
to rely on comments (which a couple of places failed to provide anyhow).
Richard Hopkins, additional work by me to clean up update_attstats() too
The initial commit of the ALTER TABLE ADD FOREIGN KEY NOT VALID feature
failed to support labeling such constraints as deferrable. The best fix
for this seems to be to fold NOT VALID into ConstraintAttributeSpec.
That's a bit more general than the documented syntax, but it allows
better-targeted syntax error messages.
In addition, do some mostly-but-not-entirely-cosmetic code review for
the whole NOT VALID patch.
Truncating or dropping a table is treated like deletion of all tuples, and
check for conflicts accordingly. If a table is clustered or rewritten by
ALTER TABLE, all predicate locks on the heap are promoted to relation-level
locks, because the tuple or page ids of any existing tuples will change and
won't be valid after rewriting the table. Arguably ALTER TABLE should be
treated like a mass-UPDATE of every row, but if you e.g change the datatype
of a column, you could also argue that it's just a change to the physical
layout, not a logical change. Reindexing promotes all locks on the index to
relation-level lock on the heap.
Kevin Grittner, with a lot of cosmetic changes by me.
My previous commit disallowed this operation, but did nothing about
cleaning up the damage if one had already been done. With the operation
disallowed, it's okay to just forcibly clear xmax in a sequence's tuple,
since any value seen there could not represent a live transaction's lock.
So, any sequence-specific operation will repair the problem automatically,
whether or not the user has already seen "could not access status of
transaction" failures.
When we added the ability for vacuum to skip heap pages by consulting the
visibility map, we made it just not update the reltuples/relpages
statistics if it skipped any pages. But this could leave us with extremely
out-of-date stats for a table that contains any unchanging areas,
especially for TOAST tables which never get processed by ANALYZE. In
particular this could result in autovacuum making poor decisions about when
to process the table, as in recent report from Florian Helmberger. And in
general it's a bad idea to not update the stats at all. Instead, use the
previous values of reltuples/relpages as an estimate of the tuple density
in unvisited pages. This approach results in a "moving average" estimate
of reltuples, which should converge to the correct value over multiple
VACUUM and ANALYZE cycles even when individual measurements aren't very
good.
This new method for updating reltuples is used by both VACUUM and ANALYZE,
with the result that we no longer need the grotty interconnections that
caused ANALYZE to not update the stats depending on what had happened
in the parent VACUUM command.
Also, fix the logic for skipping all-visible pages during VACUUM so that it
looks ahead rather than behind to decide what to do, as per a suggestion
from Greg Stark. This eliminates useless scanning of all-visible pages at
the start of the relation or just after a not-all-visible page. In
particular, the first few pages of the relation will not be invariably
included in the scanned pages, which seems to help in not overweighting
them in the reltuples estimate.
Back-patch to 8.4, where the visibility map was introduced.
This is necessary to avoid long-term memory leakage, because the main loop
in PostgresMain expects to be executing in MessageContext, and hence is a
bit sloppy about freeing stuff that is only needed for the duration of
processing the current client message. The known case of an actual leak
is when encoding conversion has to be done on the incoming command string,
but there might be others. Per report from Per-Olov Esgard.
Back-patch to 9.0, where the bug was introduced by the LISTEN/NOTIFY
rewrite.
We must lock out autovacuuming of the old toast table before computing the
OldestXmin horizon we will use. Otherwise, autovacuum could start on the
toast table later, compute a later OldestXmin horizon, and remove as DEAD
toast tuples that we still need (because we think their parent tuples are
only RECENTLY_DEAD). Per further thought about bug #5998.
Per discussion, removing the hint seems better than correcting it because
the adjacent analogous cases in RenameRelation don't have any hints, and
nobody seems to have missed 'em.
Shigeru Hanada
Per bug #5988, reported by Marko Tiikkaja, and further analyzed by Tom
Lane, the previous coding was broken in several respects: even if the
target table already existed, a subsequent CREATE TABLE IF NOT EXISTS
might try to add additional constraints or sequences-for-serial
specified in the new CREATE TABLE statement.
In passing, this also fixes a minor information leak: it's no longer
possible to figure out whether a schema to which you don't have CREATE
access contains a sequence named like "x_y_seq" by attempting to create a
table in that schema called "x" with a serial column called "y".
Some more refactoring of this code in the future might be warranted,
but that will need to wait for a later major release.
This option turns off autovacuum, prevents non-super-user connections,
and enables oid setting hooks in the backend. The code continues to use
the old autoavacuum disable settings for servers with earlier catalog
versions.
This includes a catalog version bump to identify servers that support
the -b option.
This patch is almost entirely cosmetic --- mostly cleaning up a lot of
neglected comments, and fixing code layout problems in places where the
patch made lines too long and then pgindent did weird things with that.
I did find a bug-of-omission in equalTupleDescs().
This syntax allows a standalone table to be made into a typed table,
or a typed table to be made standalone. This is possibly a mildly
useful feature in its own right, but the real motivation for this
change is that we need it to make pg_upgrade work with typed tables.
This doesn't actually fix that problem, but it's necessary
infrastructure.
Noah Misch
There can never be a need to push the indcheckxmin horizon forward, since
any HOT chains that are actually broken with respect to the index must
pre-date its original creation. So we can just avoid changing pg_index
altogether during a REINDEX operation.
This offers a cleaner solution than my previous patch for the problem
found a few days ago that we mustn't try to update pg_index while we are
reindexing it. System catalog indexes will always be created with
indcheckxmin = false during initdb, and with this modified code we should
never try to change their pg_index entries. This avoids special-casing
system catalogs as the former patch did, and should provide a performance
benefit for many cases where REINDEX formerly caused an index to be
considered unusable for a short time.
Back-patch to 8.3 to cover all versions containing HOT. Note that this
patch changes the API for index_build(), but I believe it is unlikely that
any add-on code is calling that directly.
While "UTF8" is the correct name for this encoding, existing JDBC drivers
expect that if they send "UNICODE" it will read back the same way; they
fail with an opaque "Protocol error" complaint if not. This will be fixed
in the 9.1 drivers, but until older drivers are no longer in use in the
wild, we'd better leave "UNICODE" alone. Continue to canonicalize all
other inputs. Per report from Steve Singer and subsequent discussion.
The other DDL operations that create an inheritance relationship were
checking for collation match already, but this one got missed.
Also fix comments that failed to mention collation checks.
For what seem entirely historical reasons, a bitmask "flags" argument was
recently added to reindex_relation without subsuming its existing boolean
argument into that bitmask. This seems a bit bizarre, so fold them
together.
The lock level for adding a parent table is now ShareUpdateExclusiveLock;
see commit fbcf4b92aa. This comment didn't
get updated to match, but it doesn't seem important to mention this detail
here, so rather than updating it now, just take it out.
Instead of using slightly-too-clever heuristics to decide when we must
create a TOAST table, just check whether one is needed every time the
table is altered. Checking whether a toast table is needed is cheap
enough that we needn't worry about doing it on every ALTER TABLE command,
and the previous coding is apparently prone to accidental breakage:
commit 04e17bae50 broken ALTER TABLE ..
SET STORAGE, which moved some actions from AT_PASS_COL_ATTRS to
AT_PASS_MISC, and commit 6c57239985 broke
ALTER TABLE .. ADD COLUMN by changing the way that adding columns
recurses into child tables.
Noah Misch, with one comment change by me
Since collation is effectively an argument, not a property of the function,
FmgrInfo is really the wrong place for it; and this becomes critical in
cases where a cached FmgrInfo is used for varying purposes that might need
different collation settings. Fix by passing it in FunctionCallInfoData
instead. In particular this allows a clean fix for bug #5970 (record_cmp
not working). This requires touching a bit more code than the original
method, but nobody ever thought that collations would not be an invasive
patch...
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
Previous patches took care of assorted places that call transformExpr from
outside the main parser, but I overlooked the fact that some places use
transformWhereClause as a shortcut for transformExpr + coerce_to_boolean.
In particular this broke collation-sensitive index WHERE clauses, as per
report from Thom Brown. Trigger WHEN and rule WHERE clauses too.
I'm not forcing initdb for this fix, but any affected indexes, triggers,
or rules will need to be dropped and recreated.
The previous functions of assign hooks are now split between check hooks
and assign hooks, where the former can fail but the latter shouldn't.
Aside from being conceptually clearer, this approach exposes the
"canonicalized" form of the variable value to guc.c without having to do
an actual assignment. And that lets us fix the problem recently noted by
Bernd Helmle that the auto-tune patch for wal_buffers resulted in bogus
log messages about "parameter "wal_buffers" cannot be changed without
restarting the server". There may be some speed advantage too, because
this design lets hook functions avoid re-parsing variable values when
restoring a previous state after a rollback (they can store a pre-parsed
representation of the value instead). This patch also resolves a
longstanding annoyance about custom error messages from variable assign
hooks: they should modify, not appear separately from, guc.c's own message
about "invalid parameter value".
The previous coding set attinhcount too high in some cases, resulting in
an undumpable, undroppable column. Per bug #5856, reported by Naoya
Anzai. See also commit 31b6fc06d8, which
fixes a similar bug in ALTER TABLE .. ADD CONSTRAINT.
Patch by Noah Misch.
This mostly involves making it work with the objectaddress.c framework,
which does most of the heavy lifting. In that vein, change
GetForeignDataWrapperOidByName to get_foreign_data_wrapper_oid and
GetForeignServerOidByName to get_foreign_server_oid, to match the
pattern we use for other object types.
Robert Haas and Shigeru Hanada
Eventually we might be able to allow that, but it's not clear how many
places need to be fixed to prevent infinite recursion when there's a direct
or indirect inclusion of a rowtype in itself. One such place is
CheckAttributeType(), which will recurse to stack overflow in cases such as
those exhibited in bug #5950 from Alex Perepelica. If we were sure it was
the only such place, we could easily modify the code added by this patch to
stop the recursion without a complaint ... but it probably isn't the only
such place. Hence, throw error until such time as someone is excited
enough about this type of usage to put work into making it safe.
Back-patch as far as 8.3. 8.2 doesn't have the recursive call in
CheckAttributeType in the first place, so I see no need to add code there
in the absence of clear evidence of a problem elsewhere.
In nearly all cases, the caller already knows the correct collation, and
in a number of places, the value the caller has handy is more correct than
the default for the type would be. (In particular, this patch makes it
significantly less likely that eval_const_expressions will result in
changing the exposed collation of an expression.) So an internal lookup
is both expensive and wrong.
Ensure that COLLATE at the top level of an index expression is treated the
same as a grammatically separate COLLATE. Fix bogus reverse-parsing logic
in pg_get_indexdef.
pg_newlocale_from_collation does not have enough context to give an error
message that's even a little bit useful, so move the responsibility for
complaining up to its callers. Also, reword ERRCODE_INDETERMINATE_COLLATION
error messages in a less jargony, more message-style-guide-compliant
fashion.
All expression nodes now have an explicit output-collation field, unless
they are known to only return a noncollatable data type (such as boolean
or record). Also, nodes that can invoke collation-aware functions store
a separate field that is the collation value to pass to the function.
This avoids confusion that arises when a function has collatable inputs
and noncollatable output type, or vice versa.
Also, replace the parser's on-the-fly collation assignment method with
a post-pass over the completed expression tree. This allows us to use
a more complex (and hopefully more nearly spec-compliant) assignment
rule without paying for it in extra storage in every expression node.
Fix assorted bugs in the planner's handling of collations by making
collation one of the defining properties of an EquivalenceClass and
by converting CollateExprs into discardable RelabelType nodes during
expression preprocessing.
When adding an inheritance parent to a table, an AccessShareLock on the
parent isn't strong enough to prevent trouble, so take
ShareUpdateExclusiveLock instead. Since this is a behavior change,
albeit a fairly unobtrusive one, and since we have only one report
from the field, no back-patch.
Report by Jon Nelson, analysis by Alvaro Herrera, fix by me.
While this will give wrong answers when estimating selectivity for a
comparison operator that's using a non-default collation, the estimation
error probably won't be large; and anyway the former approach created
estimation errors of its own by trying to use a histogram that might have
been computed with some other collation. So we'll adopt this simplified
approach for now and perhaps improve it sometime in the future.
This patch incorporates changes from Andres Freund to make sure that
selfuncs.c passes a valid collation OID to any datatype-specific function
it calls, in case that function wants collation information. Said OID will
now always be DEFAULT_COLLATION_OID, but at least we won't get errors.
CollateClause is now used only in raw grammar output, and CollateExpr after
parse analysis. This is for clarity and to avoid carrying collation names
in post-analysis parse trees: that's both wasteful and possibly misleading,
since the collation's name could be changed while the parsetree still
exists.
Also, clean up assorted infelicities and omissions in processing of the
node type.
Use collencoding = -1 to represent such a collation in pg_collation.
We need this to make the "default" entry work sanely, and a later
patch will fix the C/POSIX entries to be represented this way instead
of duplicating them across all encodings. All lookup operations now
search first for an entry that's database-encoding-specific, and then
for the same name with collencoding = -1.
Also some incidental code cleanup in collationcmds.c and pg_collation.c.
The initial collations patch treated a COLLATE spec as part of a TypeName,
following what can only be described as brain fade on the part of the SQL
committee. It's a lot more reasonable to treat COLLATE as a syntactically
separate object, so that it can be added in only the productions where it
actually belongs, rather than needing to reject it in a boatload of places
where it doesn't belong (something the original patch mostly failed to do).
In addition this change lets us meet the spec's requirement to allow
COLLATE anywhere in the clauses of a ColumnDef, and it avoids unfriendly
behavior for constructs such as "foo::type COLLATE collation".
To do this, pull collation information out of TypeName and put it in
ColumnDef instead, thus reverting most of the collation-related changes in
parse_type.c's API. I made one additional structural change, which was to
use a ColumnDef as an intermediate node in AT_AlterColumnType AlterTableCmd
nodes. This provides enough room to get rid of the "transform" wart in
AlterTableCmd too, since the ColumnDef can carry the USING expression
easily enough.
Also fix some other minor bugs that have crept in in the same areas,
like failure to copy recently-added fields of ColumnDef in copyfuncs.c.
While at it, document the formerly secret ability to specify a collation
in ALTER TABLE ALTER COLUMN TYPE, ALTER TYPE ADD ATTRIBUTE, and
ALTER TYPE ALTER ATTRIBUTE TYPE; and correct some misstatements about
what the default collation selection will be when COLLATE is omitted.
BTW, the three-parameter form of format_type() should go away too,
since it just contributes to the confusion in this area; but I'll do
that in a separate patch.
Formerly, any member of a role could change the role's comment, as of
course could superusers; but holders of CREATEROLE privilege could not,
unless they were also members. This led to the odd situation that a
CREATEROLE holder could create a role but then could not comment on it.
It also seems a bit dubious to let an unprivileged user change his own
comment, let alone those of group roles he belongs to. So, change the
rule to be "you must be superuser to comment on a superuser role, or
hold CREATEROLE to comment on non-superuser roles". This is the same
as the privilege check for creating/dropping roles, and thus fits much
better with the rule for other object types, namely that only the owner
of an object can comment on it.
In passing, clean up the documentation for COMMENT a little bit.
Per complaint from Owen Jacobson and subsequent discussion.
contains newly-inserted tuples that according to our OldestXmin are not
yet visible to everyone. The value returned by GetOldestXmin() is conservative,
and it can move backwards on repeated calls, so if we see that contradiction
between the PD_ALL_VISIBLE flag and status of tuples on the page, we have to
assume it's because an earlier vacuum calculated a higher OldestXmin value,
and all the tuples really are visible to everyone.
We have received several reports of this bug, with the "PD_ALL_VISIBLE flag
was incorrectly set in relation ..." warning appearing in logs. We were
finally able to hunt it down with David Gould's help to run extra diagnostics
in an environment where this happened frequently.
Also reword the warning, per Robert Haas' suggestion, to not imply that the
PD_ALL_VISIBLE flag is necessarily at fault, as it might also be a symptom
of corruption on a tuple header.
Backpatch to 8.4, where the PD_ALL_VISIBLE flag was introduced.
This mostly just involves creating control, install, and
update-from-unpackaged scripts for them. However, I had to adjust plperl
and plpython to not share the same support functions between variants,
because we can't put the same function into multiple extensions.
catversion bump forced due to new contents of pg_pltemplate, and because
initdb now installs plpgsql as an extension not a bare language.
Add support for regression testing these as extensions not bare
languages.
Fix a couple of other issues that popped up while testing this: my initial
hack at pg_dump binary-upgrade support didn't work right, and we don't want
an extra schema permissions test after all.
Documentation changes still to come, but I'm committing now to see
whether the MSVC build scripts need work (likely they do).
It is possible that an expression ends up with a collatable type but
without a collation. CREATE TABLE AS could then create a table based
on that. But such a column cannot be dumped with valid SQL syntax, so
we disallow creating such a column.
per test report from Noah Misch
Remove the unconditional superuser permissions check in CREATE EXTENSION,
and instead define a "superuser" extension property, which when false
(not the default) skips the superuser permissions check. In this case
the calling user only needs enough permissions to execute the commands
in the extension's installation script. The superuser property is also
enforced in the same way for ALTER EXTENSION UPDATE cases.
In other ALTER EXTENSION cases and DROP EXTENSION, test ownership of
the extension rather than superuserness. ALTER EXTENSION ADD/DROP needs
to insist on ownership of the target object as well; to do that without
duplicating code, refactor comment.c's big switch for permissions checks
into a separate function in objectaddress.c.
I also removed the superuserness checks in pg_available_extensions and
related functions; there's no strong reason why everybody shouldn't
be able to see that info.
Also invent an IF NOT EXISTS variant of CREATE EXTENSION, and use that
in pg_dump, so that dumps won't fail for installed-by-default extensions.
We don't have any of those yet, but we will soon.
This is all per discussion of wrapping the standard procedural languages
into extensions. I'll make those changes in a separate commit; this is
just putting the core infrastructure in place.
Per discussion, this seems important for plans involving writable CTEs,
since there can now be more than one ModifyTable node in the plan.
To retain the same formatting as for target tables of scan nodes, we
show only one target table, which will be the parent table in case of
an UPDATE or DELETE on an inheritance tree. Individual child tables
can be determined by inspecting the child plan trees if needed.
With this patch, portals, SQL functions, and SPI all agree that there
should be only a CommandCounterIncrement between the queries that are
generated from a single SQL command by rule expansion. Fetching a whole
new snapshot now happens only between original queries. This is equivalent
to the existing behavior of EXPLAIN ANALYZE, and it was judged to be the
best choice since it eliminates one source of concurrency hazards for
rules. The patch should also make things marginally faster by reducing the
number of snapshot push/pop operations.
The patch removes pg_parse_and_rewrite(), which is no longer used anywhere.
There was considerable discussion about more aggressive refactoring of the
query-processing functions exported by postgres.c, but for the moment
nothing more has been done there.
I also took the opportunity to refactor snapmgr.c's API slightly: the
former PushUpdatedSnapshot() has been split into two functions.
Marko Tiikkaja, reviewed by Steve Singer and Tom Lane
The originally committed patch for modifying CTEs didn't interact well
with EXPLAIN, as noted by myself, and also had corner-case problems with
triggers, as noted by Dean Rasheed. Those problems show it is really not
practical for ExecutorEnd to call any user-defined code; so split the
cleanup duties out into a new function ExecutorFinish, which must be called
between the last ExecutorRun call and ExecutorEnd. Some Asserts have been
added to these functions to help verify correct usage.
It is no longer necessary for callers of the executor to call
AfterTriggerBeginQuery/AfterTriggerEndQuery for themselves, as this is now
done by ExecutorStart/ExecutorFinish respectively. If you really need to
suppress that and do it for yourself, pass EXEC_FLAG_SKIP_TRIGGERS to
ExecutorStart.
Also, refactor portal commit processing to allow for the possibility that
PortalDrop will invoke user-defined code. I think this is not actually
necessary just yet, since the portal-execution-strategy logic forces any
non-pure-SELECT query to be run to completion before we will consider
committing. But it seems like good future-proofing.
This patch implements data-modifying WITH queries according to the
semantics that the updates all happen with the same command counter value,
and in an unspecified order. Therefore one WITH clause can't see the
effects of another, nor can the outer query see the effects other than
through the RETURNING values. And attempts to do conflicting updates will
have unpredictable results. We'll need to document all that.
This commit just fixes the code; documentation updates are waiting on
author.
Marko Tiikkaja and Hitoshi Harada
The recent additions for FDW support required checking foreign-table-ness
in several places in the parse/plan chain. While it's not clear whether
that would really result in a noticeable slowdown, it seems best to avoid
any performance risk by keeping a copy of the relation's relkind in
RangeTblEntry. That might have some other uses later, anyway.
Per discussion.
"SELECT ... INTO UNLOGGED tabname" works, but wasn't documented; CREATE
UNLOGGED SEQUENCE and CREATE UNLOGGED VIEW failed an assertion, instead
of throwing a sensible error.
Latter issue reported by Itagaki Takahiro; patch review by Tom Lane.
ExecUpdate checked for whether ExecBRUpdateTriggers had returned a new
tuple value by seeing if the returned tuple was pointer-equal to the old
one. But the "old one" was in estate->es_junkFilter's result slot, which
would be scribbled on if we had done an EvalPlanQual update in response to
a concurrent update of the target tuple; therefore we were comparing a
dangling pointer to a live one. Given the right set of circumstances we
could get a false match, resulting in not forcing the tuple to be stored in
the slot we thought it was stored in. In the case reported by Maxim Boguk
in bug #5798, this led to "cannot extract system attribute from virtual
tuple" failures when trying to do "RETURNING ctid". I believe there is a
very-low-probability chance of more serious errors, such as generating
incorrect index entries based on the original rather than the
trigger-modified version of the row.
In HEAD, change all of ExecBRInsertTriggers, ExecIRInsertTriggers,
ExecBRUpdateTriggers, and ExecIRUpdateTriggers so that they continue to
have similar APIs. In the back branches I just changed
ExecBRUpdateTriggers, since there is no bug in the ExecBRInsertTriggers
case.
File encodings can be specified separately from client encoding.
If not specified, client encoding is used for backward compatibility.
Cases when the encoding doesn't match client encoding are slower
than matched cases because we don't have conversion procs for other
encodings. Performance improvement would be be a future work.
Original patch by Hitoshi Harada, and modified by me.
This is both very useful in its own right, and an important test case
for the core FDW support.
This commit includes a small refactoring of copy.c to expose its option
checking code as a separately callable function. The original patch
submission duplicated hundreds of lines of that code, which seemed pretty
unmaintainable.
Shigeru Hanada, reviewed by Itagaki Takahiro and Tom Lane
This commit provides the core code and documentation needed. A contrib
module test case will follow shortly.
Shigeru Hanada, Jan Urbanski, Heikki Linnakangas
Add a fdwhandler column to pg_foreign_data_wrapper, plus HANDLER options
in the CREATE FOREIGN DATA WRAPPER and ALTER FOREIGN DATA WRAPPER commands,
plus pg_dump support for same. Also invent a new pseudotype fdw_handler
with properties similar to language_handler.
This is split out of the "FDW API" patch for ease of review; it's all stuff
we will certainly need, regardless of any other details of the FDW API.
FDW handler functions will not actually get called yet.
In passing, fix some omissions and infelicities in foreigncmds.c.
Shigeru Hanada, Jan Urbanski, Heikki Linnakangas
They are expected to be used by extension modules like file_fdw.
There are no user-visible changes.
Itagaki Takahiro
Reviewed and tested by Kevin Grittner and Noah Misch.
The original design of pg_available_extensions did not consider the
possibility of version-specific control files. Split it into two views:
pg_available_extensions shows information that is generic about an
extension, while pg_available_extension_versions shows all available
versions together with information that could be version-dependent.
Also, add an SRF pg_extension_update_paths() to assist in checking that
a collection of update scripts provide sane update path sequences.
This allows us to have an unambiguous rule for deconstructing the names
of script files and secondary control files, without having to forbid
extension and version names from containing any dashes. We do have to
forbid them from containing double dashes or leading/trailing dashes,
but neither restriction is likely to bother anyone in practice.
Per discussion, this seems like a better solution overall than the
original design.
This change causes a multi-step update sequence to behave exactly as if the
updates had been commanded one at a time, including updating the "requires"
dependencies afresh at each step. The initial implementation took the
shortcut of examining only the final target version's "requires" and
changing the catalog entry but once. But on reflection that's a bad idea,
since it could lead to executing old update scripts under conditions
different than they were designed/tested for. Better to expend a few extra
cycles and avoid any surprises.
In the same spirit, if a CREATE EXTENSION FROM operation involves applying
a series of update files, it will act as though the CREATE had first been
done using the initial script's target version and then the additional
scripts were invoked with ALTER EXTENSION UPDATE.
I also removed the restriction about not changing encoding in secondary
control files. The new rule is that a script is assumed to be in whatever
encoding the control file(s) specify for its target version. Since this
reimplementation causes us to read each intermediate version's control
file, there's no longer any uncertainty about which encoding setting would
get applied.
- collowner field
- CREATE COLLATION
- ALTER COLLATION
- DROP COLLATION
- COMMENT ON COLLATION
- integration with extensions
- pg_dump support for the above
- dependency management
- psql tab completion
- psql \dO command
When the old type is binary coercible to the new type and the using
clause does not change the column contents, we can avoid a full table
rewrite, though any indexes on the affected columns will still need
to be rebuilt. This applies, for example, when changing a varchar
column to be of type text.
The prior coding assumed that the set of operations that force a
rewrite is identical to the set of operations that must be propagated
to tables making use of the affected table's rowtype. This is
no longer true: even though the tuples in those tables wouldn't
need to be modified, the data type change invalidate indexes built
using those composite type columns. Indexes on the table we're
actually modifying can be invalidated too, of course, but the
existing machinery is sufficient to handle that case.
Along the way, add some debugging messages that make it possible
to understand what operations ALTER TABLE is actually performing
in these cases.
Noah Misch and Robert Haas
Arrange for the control files to be in $SHAREDIR/extension not
$SHAREDIR/contrib, since we're generally trying to deprecate the term
"contrib" and this is a once-in-many-moons opportunity to get rid of it in
install paths. Fix PGXS to install the $EXTENSION file into that directory
no matter what MODULEDIR is set to; a nondefault MODULEDIR should only
affect the script and secondary extension files. Fix the control file
directory parameter to be interpreted relative to $SHAREDIR, to avoid a
surprising disconnect between how you specify that and what you set
MODULEDIR to.
Per discussion with David Wheeler.
This follows recent discussions, so it's quite a bit different from
Dimitri's original. There will probably be more changes once we get a bit
of experience with it, but let's get it in and start playing with it.
This is still just core code. I'll start converting contrib modules
shortly.
Dimitri Fontaine and Tom Lane
Per discussion with Noah Misch, the previous coding, introduced by
my commit 65377e0b9c on 2011-02-06,
was really an abuse of RELKIND_COMPOSITE_TYPE, since the caller in
typecmds.c is actually passing the name of a domain. So go back
having a type name argument, but make the first argument a Relation
rather than just a string so we can tell whether it's a table or
a foreign table and emit the proper error message.
This follows my proposal of yesterday, namely that we try to recreate the
previous state of the extension exactly, instead of allowing CREATE
EXTENSION to run a SQL script that might create some entirely-incompatible
on-disk state. In --binary-upgrade mode, pg_dump won't issue CREATE
EXTENSION at all, but instead uses a kluge function provided by
pg_upgrade_support to recreate the pg_extension row (and extension-level
pg_depend entries) without creating any member objects. The member objects
are then restored in the same way as if they weren't members, in particular
using pg_upgrade's normal hacks to preserve OIDs that need to be preserved.
Then, for each member object, ALTER EXTENSION ADD is issued to recreate the
pg_depend entry that marks it as an extension member.
In passing, fix breakage in pg_upgrade's enum-type support: somebody didn't
fix it when the noise word VALUE got added to ALTER TYPE ADD. Also,
rationalize parsetree representation of COMMENT ON DOMAIN and fix
get_object_address() to allow OBJECT_DOMAIN.
This is an essential component of making the extension feature usable;
first because it's needed in the process of converting an existing
installation containing "loose" objects of an old contrib module into
the extension-based world, and second because we'll have to use it
in pg_dump --binary-upgrade, as per recent discussion.
Loosely based on part of Dimitri Fontaine's ALTER EXTENSION UPGRADE
patch.
Older versions of gcc tend to throw "variable might be clobbered by
`longjmp' or `vfork'" warnings whenever a variable is assigned in more than
one place and then used after the end of a PG_TRY block. That's reasonably
easy to work around in execute_extension_script, and the overhead of
unconditionally saving/restoring the GUC variables seems unlikely to be a
serious concern.
Also clean up logic in ATExecValidateConstraint to make it easier to read
and less likely to provoke "variable might be used uninitialized in this
function" warnings.
This patch adds the server infrastructure to support extensions.
There is still one significant loose end, namely how to make it play nice
with pg_upgrade, so I am not yet committing the changes that would make
all the contrib modules depend on this feature.
In passing, fix a disturbingly large amount of breakage in
AlterObjectNamespace() and callers.
Dimitri Fontaine, reviewed by Anssi Kääriäinen,
Itagaki Takahiro, Tom Lane, and numerous others