Previously PostgreSQL built with -DLWLOCK_STATS could report
more than one LWLock statistics entries for the same backend
process and the same LWLock. This is strange and only one
statistics should be output in that case, instead.
The cause of this issue is that the key variable used for
LWLock stats hash table was not fully initialized. The key
consists of two fields and they were initialized. But
the following 4 bytes allocated in the key variable for
the alignment was not initialized. So even if the same key
was specified, hash_search(HASH_ENTER) could not find
the existing entry for that key and created new one.
This commit fixes this issue by initializing the key
variable with zero. As the side effect of this commit,
the volume of LWLock statistics output would be reduced
very much.
Back-patch to v10, where commit 3761fe3c20 introduced the issue.
Author: Fujii Masao
Reviewed-by: Julien Rouhaud, Kyotaro Horiguchi
Discussion: https://postgr.es/m/26359edb-798a-568f-d93a-6aafac49752d@oss.nttdata.com
This new field tracks the PID of the group leader used with parallel
query. For parallel workers and the leader, the value is set to the
PID of the group leader. So, for the group leader, the value is the
same as its own PID. Note that this reflects what PGPROC stores in
shared memory, so as leader_pid is NULL if a backend has never been
involved in parallel query. If the backend is using parallel query or
has used it at least once, the value is set until the backend exits.
Author: Julien Rouhaud
Reviewed-by: Sergei Kornilov, Guillaume Lelarge, Michael Paquier, Tomas
Vondra
Discussion: https://postgr.es/m/CAOBaU_Yy5bt0vTPZ2_LUM6cUcGeqmYNoJ8-Rgto+c2+w3defYA@mail.gmail.com
Tuple conversion incorrectly concluded that no conversion was needed
as long as all the attributes lined up. But if the source tuple has a
missing attribute (from addition of a column with default), then the
destination tupdesc might not reflect the same default. The typical
symptom was that the affected columns would be unexpectedly NULL.
Repair by always forcing conversion if the source has missing
attributes, which will be filled in by the deform operation. (In
theory we could optimize for when the destination has the same
default, but that seemed overkill.)
Backpatch to 11 where missing attributes were added.
Per bug #16242.
Vik Fearing (discovery, code, testing) and me (analysis, testcase).
Discussion: https://postgr.es/m/16242-d1c9fca28445966b@postgresql.org
Using 32 bit counters means they can now realistically wrap around when
vacuuming extremely large tables. Because they're signed integers,
stats printed by vacuum look very odd when they do.
We'd love to backpatch this, but refrain because the variables are
exported and could cause third-party code to break.
Reviewed-by: Julien Rouhaud, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20200131205926.GA16367@alvherre.pgsql
The docs are ambiguous as to which tables would be copied over when the
copy_data parameter is true in ALTER SUBSCRIPTION ... REFRESH PUBLICATION.
Make it clear that it only applies to tables which are new in the
publication.
Author: David Christensen (reword by Álvaro Herrera)
Discussion: https://postgr.es/m/95339420-7F09-4F8C-ACC0-8F1CFAAD9CD7@endpoint.com
PostgresNode already retained base directories in such cases. Stop
using $SIG{__DIE__}, which is redundant with the exit status check, in
lieu of proliferating it to TestLib. Back-patch to 9.6, where commit
88802e0680 introduced retention on
failure.
Reviewed by Daniel Gustafsson.
Discussion: https://postgr.es/m/20200202170155.GA3264196@rfd.leadboat.com
Use kevent(2) to wait for events on the BSD family of operating
systems and macOS. This is similar to the epoll(2) support added
for Linux by commit 98a64d0bd.
Author: Thomas Munro
Reviewed-by: Andres Freund, Marko Tiikkaja, Tom Lane
Tested-by: Mateusz Guzik, Matteo Beccati, Keith Fiske, Heikki Linnakangas, Michael Paquier, Peter Eisentraut, Rui DeSousa, Tom Lane, Mark Wong
Discussion: https://postgr.es/m/CAEepm%3D37oF84-iXDTQ9MrGjENwVGds%2B5zTr38ca73kWR7ez_tA%40mail.gmail.com
Commit 499be013d added this field in a rather poorly-thought-through
manner, with the result being that rather than being a field of the
Append or MergeAppend plan node as intended (and as it seems to be,
in text format), it was actually an element of the "Plans" subgroup.
At least in JSON format, that's flat out invalid syntax, because
"Plans" is an array not an object.
While it's not hard to move the generation of the field so that it
appears where it's supposed to, this does result in a visible change
in field order in text format, in cases where a Append or MergeAppend
plan node has any InitPlans attached. That's slightly annoying to
do in stable branches; but the alternative of continuing to emit
broken non-text formats seems worse.
Also, since the set of fields emitted is not supposed to be
data-dependent in non-text formats, make sure that "Subplans Removed"
appears in Append and MergeAppend nodes even when it's zero, in those
formats. (The previous coding made it look like it could appear in
some other node types such as BitmapAnd, but we don't actually support
runtime pruning there, so don't emit it in those cases.)
Per bug #16171 from Mahadevan Ramachandran. Fix by Daniel Gustafsson
and Tom Lane, reviewed by Hamid Akhtar. Back-patch to v11 where this
code came in.
Discussion: https://postgr.es/m/16171-b72259ab75505fa2@postgresql.org
First, this code did not bother checking for a failure when calling
dup(). Then, per zlib, gzerror() returns NULL for a NULL input, which
can happen if passing down to gzdopen() an invalid file descriptor or if
there was an allocation failure.
No back-patch is done as this would unlikely be a problem in the field.
Per Coverity.
Reported-by: Tom Lane
When replica identity is FULL (an admittedly unusual case), the loop
that searches for tuples in execReplication.c didn't stop scanning the
table when once a matching tuple was found. Add the missing 'break'.
Note slight behavior change: we now return the first matching tuple
rather than the last one. They are supposed to be indistinguishable
anyway, so this shouldn't matter.
Author: Konstantin Knizhnik
Discussion: https://postgr.es/m/379743f6-ae91-b866-f7a2-5624e6d2b0a4@postgrespro.ru
Those new assertions can be used at file scope, outside of any function
for compilation checks. This commit provides implementations for C and
C++, and fallback implementations.
Author: Peter Smith
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Dagfinn Ilmari Mannsåker,
Michael Paquier
Discussion: https://postgr.es/m/201DD0641B056142AC8C6645EC1B5F62014B8E8030@SYD1217
The error exits added to initialize_SSL() failed to clean up the
partially-built SSL_context, and some of them also leaked the
result of SSLerrmessage(). Make them match other error-handling
cases in that function.
The error exits added to connectOptions2() failed to set conn->status
like every other error exit in that function.
In passing, make the SSL_get_peer_certificate() error exit look more
like all the other calls of SSLerrmessage().
Oversights in commit ff8ca5fad. Coverity whined about leakage of the
SSLerrmessage() results; I noted the rest in manual code review.
Using a lookup table of digit pairs reduces the number of divisions
needed, and calculating the length upfront saves some work; these
ideas are taken from the code previously committed for floats.
David Fetter, reviewed by Kyotaro Horiguchi, Tels, and me.
Discussion: https://postgr.es/m/20190924052620.GP31596%40fetter.org
Similarly to pg_upgrade, pg_ctl and initdb, a root user is able to use
--version and --help, but cannot execute the actual operation to avoid
the creation of files with permissions incompatible with the
postmaster.
This is a behavior change, so not back-patching is done.
Author: Ian Barwick
Discussion: https://postgr.es/m/CABvVfJVqOdD2neLkYdygdOHvbWz_5K_iWiqY+psMfA=FeAa3qQ@mail.gmail.com
If we attempt to create a DSM segment when no slots are available,
we should return the memory to the operating system. Previously
we did that if the DSM_CREATE_NULL_IF_MAXSEGMENTS flag was
passed in, but we didn't do it if an error was raised. Repair.
Back-patch to 9.4, where DSM segments arrived.
Author: Thomas Munro
Reviewed-by: Robert Haas
Reported-by: Julian Backes
Discussion: https://postgr.es/m/CA%2BhUKGKAAoEw-R4om0d2YM4eqT1eGEi6%3DQot-3ceDR-SLiWVDw%40mail.gmail.com
This code would accept "strinX", where X is any 1-byte character,
as meaning "string". Clearly it wasn't meant to do that.
No back-patch, since this doesn't affect correct queries and
there's some tiny chance we'd break somebody's incorrect query
in a minor release.
Report and patch by Dominik Czarnota.
Discussion: https://postgr.es/m/CABEVAa1dU0mDCAfaT8WF2adVXTDsLVJy_izotg6ze_hh-cn8qQ@mail.gmail.com
Commit fc7695891 changed CheckAttributeType to recurse into ranges,
but made it pass down the wrong collation (always InvalidOid, since
ranges as such have no collation). This would result in guaranteed
failure when considering a range type whose subtype is collatable.
Embarrassingly, we lack any regression tests that would expose such
a problem (but fortunately, somebody noticed before we shipped this
bug in any release).
Fix it to pass down the range's subtype collation property instead,
and add some regression test cases to exercise collatable-subtype
ranges a bit more. Back-patch to all supported branches, as the
previous patch was.
Report and patch by Julien Rouhaud, test cases tweaked by me
Discussion: https://postgr.es/m/CAOBaU_aBWqNweiGUFX0guzBKkcfJ8mnnyyGC_KBQmO12Mj5f_A@mail.gmail.com
If we failed to fork a worker process, or create a communication pipe
for one, WaitForTerminatingWorkers would suffer an assertion failure
if assert-enabled, otherwise crash or go into an infinite loop. This
was a consequence of not accounting for the startup condition where
we've not yet forked all the workers.
The original bug was that ParallelBackupStart would set workerStatus to
WRKR_IDLE before it had successfully forked a worker. I made things
worse in commit b7b8cc0cf by not understanding the undocumented fact
that the WRKR_TERMINATED state was also meant to represent the case
where a worker hadn't been started yet: I changed enum T_WorkerStatus
so that *all* the worker slots were initially in WRKR_IDLE state. But
this wasn't any more broken in practice, since even one slot in the
wrong state would keep WaitForTerminatingWorkers from terminating.
In v10 and later, introduce an explicit T_WorkerStatus value for
worker-not-started, in hopes of preventing future oversights of the
same ilk. Before that, just document that WRKR_TERMINATED is supposed
to cover that case (partly because it wasn't actively broken, and
partly because the enum is exposed outside parallel.c in those branches,
so there's microscopically more risk involved in changing it).
In all branches, introduce a WORKER_IS_RUNNING status test macro
to hide which T_WorkerStatus values mean that, and be more careful
not to access ParallelSlot fields till we're sure they're valid.
Per report from Vignesh C, though this is my patch not his.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CALDaNm1Luv-E3sarR+-unz-BjchquHHyfP+YC+2FS2pt_J+wxg@mail.gmail.com
We have code paths for Unix socket support and no Unix socket support.
Now add a third variant: Unix socket support but do not use a Unix
socket by default in the client or the server, only if you explicitly
specify one. This will be useful when we enable Unix socket support
on Windows.
To implement this, tweak things so that setting DEFAULT_PGSOCKET_DIR
to "" has the desired effect. This mostly already worked like that;
only a few places needed to be adjusted. Notably, the reference to
DEFAULT_PGSOCKET_DIR in UNIXSOCK_PATH() could be removed because all
callers already resolve an empty socket directory setting with a
default if appropriate.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/75f72249-8ae6-322a-63df-4fe03eeccb9f@2ndquadrant.com
When running a lot of large parallel queries concurrently, or a plan with
a lot of separate Gather nodes, it is possible to run out of DSM slots.
There are better solutions to these problems requiring architectural
redesign work, but for now, let's adjust the constants so that it's more
difficult to hit the limit.
1. Previously, a DSA area would create up to four segments at each size
before doubling the size. After this commit, it will create only two at
each size, so it ramps up faster and therefore needs fewer slots.
2. Previously, the total limit on DSM slots allowed for 2 per connection.
Switch to 5 per connection.
Also remove an obsolete nearby comment.
Author: Thomas Munro
Reviewed-by: Robert Haas, Andres Freund
Discussion: https://postre.es/m/CA%2BhUKGL6H2BpGbiF7Lj6QiTjTGyTLW_vLR%3DSn2tEBeTcYXiMKw%40mail.gmail.com
Very recent gcc complains that PLyObject_ToJsonbValue could return
a pointer to a local variable. I think it's wrong; but the coding
is fragile enough, and the savings of one palloc() minimal enough,
that it seems better to just do a palloc() all the time. (My other
idea of tweaking the if-condition doesn't suppress the warning.)
Back-patch to v11 where this code was introduced.
Discussion: https://postgr.es/m/21547.1580170366@sss.pgh.pa.us
If no DSM slots are available, a ParallelContext can still be
created, but its seg pointer is NULL. Teach parallel btree build
to cope with that by falling back to a regular non-parallel build,
to avoid crashing with a segmentation fault.
Back-patch to 11, where parallel CREATE INDEX landed.
Reported-by: Nicola Contu
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/CA%2BhUKGJgJEBnkuODBVomyK3MWFvDBbMVj%3Dgdt6DnRPU-5sQ6UQ%40mail.gmail.com
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
Previously, TRUNCATE command through a parent table checked the
permissions on not only the parent table but also the children tables
inherited from it. This was a bug and inherited queries should perform
access permission checks on the parent table only. This commit fixes
that bug.
Back-patch to all supported branches.
Author: Amit Langote
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAHGQGwFHdSvifhJE+-GSNqUHSfbiKxaeQQ7HGcYz6SC2n_oDcg@mail.gmail.com
Advancing a physical replication slot with pg_replication_slot_advance()
did not mark the slot as dirty if any advancing was done, preventing the
follow-up checkpoint to flush the slot data to disk. This caused the
advancing to be lost even on clean restarts. This does not happen for
logical slots as any advancing marked the slot as dirty. Per
discussion, the original feature has been implemented so as in the event
of a crash the slot may move backwards to a past LSN. This property is
kept and more documentation is added about that.
This commit adds some new TAP tests to check the persistency of physical
and logical slots after advancing across clean restarts.
Author: Alexey Kondratov, Michael Paquier
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Craig Ringer
Discussion: https://postgr.es/m/059cc53a-8b14-653a-a24d-5f867503b0ee@postgrespro.ru
Backpatch-through: 11
As of commit 50fc694e4, the plperl tests don't want preinstalled
plperl languages; they now install those themselves. I'd removed the
--load-extension options from the GNUmakefile, but missed teaching
the MSVC build script about that.
Per buildfarm.
This patch creates a new extension property, "trusted". An extension
that's marked that way in its control file can be installed by a
non-superuser who has the CREATE privilege on the current database,
even if the extension contains objects that normally would have to be
created by a superuser. The objects within the extension will (by
default) be owned by the bootstrap superuser, but the extension itself
will be owned by the calling user. This allows replicating the old
behavior around trusted procedural languages, without all the
special-case logic in CREATE LANGUAGE. We have, however, chosen to
loosen the rules slightly: formerly, only a database owner could take
advantage of the special case that allowed installation of a trusted
language, but now anyone who has CREATE privilege can do so.
Having done that, we can delete the pg_pltemplate catalog, moving the
knowledge it contained into the extension script files for the various
PLs. This ends up being no change at all for the in-core PLs, but it is
a large step forward for external PLs: they can now have the same ease
of installation as core PLs do. The old "trusted PL" behavior was only
available to PLs that had entries in pg_pltemplate, but now any
extension can be marked trusted if appropriate.
This also removes one of the stumbling blocks for our Python 2 -> 3
migration, since the association of "plpythonu" with Python 2 is no
longer hard-wired into pg_pltemplate's initial contents. Exactly where
we go from here on that front remains to be settled, but one problem
is fixed.
Patch by me, reviewed by Peter Eisentraut, Stephen Frost, and others.
Discussion: https://postgr.es/m/5889.1566415762@sss.pgh.pa.us
Copy the rules that src/test/regress/GNUmakefile uses for this purpose.
Since these files are .gitignore'd, the mistake wasn't obvious unless
you happened to look at "git status --ignored" in an allegedly clean
tree.
Oversight in commit 1858b105b. No need for back-patch since that's
not in the back branches.
To make this work, (1) makeJsonLexContextCstringLen now takes the
encoding to be used as an argument; (2) check_stack_depth() is made to
do nothing in frontend code, and (3) elog(ERROR, ...) is changed to
pg_log_fatal + exit in frontend code.
Mark Dilger, reviewed and slightly revised by me.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
Before, if a recovery target is configured, but the archive ended
before the target was reached, recovery would end and the server would
promote without further notice. That was deemed to be pretty wrong.
With this change, if the recovery target is not reached, it is a fatal
error.
Based-on-patch-by: Leif Gunnar Erlandsen <leif@lako.no>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/993736dd3f1713ec1f63fc3b653839f5@lako.no
channel_binding's longest allowed value is not "7", it is actually "8".
gssencmode also got that wrong.
A similar mistake has been fixed as of f4051e3.
Backpatch down to v12, where gssencmode has been introduced.
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20200128053633.GD1552@paquier.xyz
Backpatch-through: 12
Commit 40d964ec99 allowed vacuum command to leverage multiple CPUs by
invoking parallel workers to process indexes. This commit provides a
'--parallel' option to specify the parallel degree used by vacuum command.
Author: Masahiko Sawada, with few modifications by me
Reviewed-by: Mahendra Singh and Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.com
EvalPlanQualStart() supposed that it could re-use the relsubs_rowmark
and relsubs_done arrays from a prior instantiation. But since they are
allocated in the es_query_cxt of the recheckestate, that's just wrong;
EvalPlanQualEnd() will blow away that storage. Therefore we were using
storage that could have been reallocated to something else, causing all
sorts of havoc.
I think this was modeled on the old code's handling of es_epqTupleSlot,
but since the code was anyway clearing the arrays at re-use, there's
clearly no expectation of importing any outside state. So it's just
a dubious savings of a couple of pallocs, which is negligible compared
to setting up a new planstate tree. Therefore, just allocate the
arrays always. (I moved the allocations slightly for readability.)
In principle this bug could cause a problem whenever EPQ rechecks are
needed in more than one target table of a ModifyTable plan node.
In practice it seems not quite so easy to trigger as that; I couldn't
readily duplicate a crash with a partitioned target table, for instance.
That's probably down to incidental choices about when to free or
reallocate stuff. The added isolation test case does seem to reliably
show an assertion failure, though.
Per report from Oleksii Kliukin. Back-patch to v12 where the bug was
introduced (evidently by commit 3fb307bc4).
Discussion: https://postgr.es/m/EEF05F66-2871-4786-992B-5F45C92FEE2E@hintbits.com
It's not OK to do that without calling CHECK_FOR_INTERRUPTS().
Let the next wait loop deal with it, following the usual pattern.
One consequence of this bug was that a SIGTERM delivered in a very
narrow timing window could leave a parallel worker process waiting
forever for a condition variable that will never be signaled, after
an error was raised in other process.
The code is a bit different in the stable branches due to commit
1321509f, making problems less likely there. No back-patch for now,
but we may finish up deciding to make a similar change after more
discussion.
Author: Thomas Munro
Reviewed-by: Shawn Debnath
Reported-by: Tomas Vondra
Discussion: https://postgr.es/m/CA%2BhUKGJOm8zZHjVA8svoNT3tHY0XdqmaC_kHitmgXDQM49m1dA%40mail.gmail.com
This gives more information to the user about the error and it makes such
messages consistent with the other similar messages in the code.
Reported-by: Simon Riggs
Author: Mahendra Singh and Simon Riggs
Reviewed-by: Beena Emerson and Amit Kapila
Discussion: https://postgr.es/m/CANP8+j+7YUvQvGxTrCiw77R23enMJ7DFmyA3buR+fa2pKs4XhA@mail.gmail.com
These two new parameters, named sslminprotocolversion and
sslmaxprotocolversion, allow to respectively control the minimum and the
maximum version of the SSL protocol used for the SSL connection attempt.
The default setting is to allow any version for both the minimum and the
maximum bounds, causing libpq to rely on the bounds set by the backend
when negotiating the protocol to use for an SSL connection. The bounds
are checked when the values are set at the earliest stage possible as
this makes the checks independent of any SSL implementation.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier, Cary Huang
Discussion: https://postgr.es/m/4F246AE3-A7AE-471E-BD3D-C799D3748E03@yesql.se
The following changes make the predicate locking functions more
generic and suitable for use by future access methods:
- PredicateLockTuple() is renamed to PredicateLockTID(). It takes
ItemPointer and inserting transaction ID instead of HeapTuple.
- CheckForSerializableConflictIn() takes blocknum instead of buffer.
- CheckForSerializableConflictOut() no longer takes HeapTuple or buffer.
Author: Ashwin Agrawal
Reviewed-by: Andres Freund, Kuntal Ghosh, Thomas Munro
Discussion: https://postgr.es/m/CALfoeiv0k3hkEb3Oqk%3DziWqtyk2Jys1UOK5hwRBNeANT_yX%2Bng%40mail.gmail.com
In the wake of 1f3a02173, assorted buildfarm members were warning about
"control reaches end of non-void function" or the like. Do what we've
done elsewhere: in place of a "default" switch case that will prevent
the compiler from warning about unhandled enum values, put a catchall
elog() after the switch. And return a dummy value to satisfy compilers
that don't know elog() doesn't return.
Jeff Davis
Amit Kapila
Fujii Masao
Michael Paquier
Andrew Gierth
Alvaro Herrera
Noah Misch
Thomas Munro
Tom Lane
Peter Eisentraut
Robert Haas
Heikki Linnakangas