This gets rid of an impressive amount of duplicative code, with only
minimal behavior changes. DROP FOREIGN DATA WRAPPER now requires object
ownership rather than superuser privileges, matching the documentation
we already have. We also eliminate the historical warning about dropping
a built-in function as unuseful. All operations are now performed in the
same order for all object types handled by dropcmds.c.
KaiGai Kohei, with minor revisions by me
Per spec we ought to apply select_common_collation() across the expressions
in each column of the VALUES table. The original coding was just taking
the first row and assuming it was representative.
This patch adds a field to struct RangeTblEntry to carry the resolved
collations, so initdb is forced for changes in stored rule representation.
Instead of playing cute games with pathkeys, just build a direct
representation of the intended sub-select, and feed it through
query_planner to get a Path for the index access. This is a bit slower
than 9.1's previous method, since we'll duplicate most of the overhead of
query_planner; but since the whole optimization only applies to rather
simple single-table queries, that probably won't be much of a problem in
practice. The advantage is that we get to do the right thing when there's
a partial index that needs the implicit IS NOT NULL clause to be usable.
Also, although this makes planagg.c be a bit more closely tied to the
ordering of operations in grouping_planner, we can get rid of some coupling
to lower-level parts of the planner. Per complaint from Marti Raudsepp.
All expression nodes now have an explicit output-collation field, unless
they are known to only return a noncollatable data type (such as boolean
or record). Also, nodes that can invoke collation-aware functions store
a separate field that is the collation value to pass to the function.
This avoids confusion that arises when a function has collatable inputs
and noncollatable output type, or vice versa.
Also, replace the parser's on-the-fly collation assignment method with
a post-pass over the completed expression tree. This allows us to use
a more complex (and hopefully more nearly spec-compliant) assignment
rule without paying for it in extra storage in every expression node.
Fix assorted bugs in the planner's handling of collations by making
collation one of the defining properties of an EquivalenceClass and
by converting CollateExprs into discardable RelabelType nodes during
expression preprocessing.
CollateClause is now used only in raw grammar output, and CollateExpr after
parse analysis. This is for clarity and to avoid carrying collation names
in post-analysis parse trees: that's both wasteful and possibly misleading,
since the collation's name could be changed while the parsetree still
exists.
Also, clean up assorted infelicities and omissions in processing of the
node type.
The initial collations patch treated a COLLATE spec as part of a TypeName,
following what can only be described as brain fade on the part of the SQL
committee. It's a lot more reasonable to treat COLLATE as a syntactically
separate object, so that it can be added in only the productions where it
actually belongs, rather than needing to reject it in a boatload of places
where it doesn't belong (something the original patch mostly failed to do).
In addition this change lets us meet the spec's requirement to allow
COLLATE anywhere in the clauses of a ColumnDef, and it avoids unfriendly
behavior for constructs such as "foo::type COLLATE collation".
To do this, pull collation information out of TypeName and put it in
ColumnDef instead, thus reverting most of the collation-related changes in
parse_type.c's API. I made one additional structural change, which was to
use a ColumnDef as an intermediate node in AT_AlterColumnType AlterTableCmd
nodes. This provides enough room to get rid of the "transform" wart in
AlterTableCmd too, since the ColumnDef can carry the USING expression
easily enough.
Also fix some other minor bugs that have crept in in the same areas,
like failure to copy recently-added fields of ColumnDef in copyfuncs.c.
While at it, document the formerly secret ability to specify a collation
in ALTER TABLE ALTER COLUMN TYPE, ALTER TYPE ADD ATTRIBUTE, and
ALTER TYPE ALTER ATTRIBUTE TYPE; and correct some misstatements about
what the default collation selection will be when COLLATE is omitted.
BTW, the three-parameter form of format_type() should go away too,
since it just contributes to the confusion in this area; but I'll do
that in a separate patch.
Remove the unconditional superuser permissions check in CREATE EXTENSION,
and instead define a "superuser" extension property, which when false
(not the default) skips the superuser permissions check. In this case
the calling user only needs enough permissions to execute the commands
in the extension's installation script. The superuser property is also
enforced in the same way for ALTER EXTENSION UPDATE cases.
In other ALTER EXTENSION cases and DROP EXTENSION, test ownership of
the extension rather than superuserness. ALTER EXTENSION ADD/DROP needs
to insist on ownership of the target object as well; to do that without
duplicating code, refactor comment.c's big switch for permissions checks
into a separate function in objectaddress.c.
I also removed the superuserness checks in pg_available_extensions and
related functions; there's no strong reason why everybody shouldn't
be able to see that info.
Also invent an IF NOT EXISTS variant of CREATE EXTENSION, and use that
in pg_dump, so that dumps won't fail for installed-by-default extensions.
We don't have any of those yet, but we will soon.
This is all per discussion of wrapping the standard procedural languages
into extensions. I'll make those changes in a separate commit; this is
just putting the core infrastructure in place.
This patch implements data-modifying WITH queries according to the
semantics that the updates all happen with the same command counter value,
and in an unspecified order. Therefore one WITH clause can't see the
effects of another, nor can the outer query see the effects other than
through the RETURNING values. And attempts to do conflicting updates will
have unpredictable results. We'll need to document all that.
This commit just fixes the code; documentation updates are waiting on
author.
Marko Tiikkaja and Hitoshi Harada
The recent additions for FDW support required checking foreign-table-ness
in several places in the parse/plan chain. While it's not clear whether
that would really result in a noticeable slowdown, it seems best to avoid
any performance risk by keeping a copy of the relation's relkind in
RangeTblEntry. That might have some other uses later, anyway.
Per discussion.
Add a fdwhandler column to pg_foreign_data_wrapper, plus HANDLER options
in the CREATE FOREIGN DATA WRAPPER and ALTER FOREIGN DATA WRAPPER commands,
plus pg_dump support for same. Also invent a new pseudotype fdw_handler
with properties similar to language_handler.
This is split out of the "FDW API" patch for ease of review; it's all stuff
we will certainly need, regardless of any other details of the FDW API.
FDW handler functions will not actually get called yet.
In passing, fix some omissions and infelicities in foreigncmds.c.
Shigeru Hanada, Jan Urbanski, Heikki Linnakangas
This follows recent discussions, so it's quite a bit different from
Dimitri's original. There will probably be more changes once we get a bit
of experience with it, but let's get it in and start playing with it.
This is still just core code. I'll start converting contrib modules
shortly.
Dimitri Fontaine and Tom Lane
This is an essential component of making the extension feature usable;
first because it's needed in the process of converting an existing
installation containing "loose" objects of an old contrib module into
the extension-based world, and second because we'll have to use it
in pg_dump --binary-upgrade, as per recent discussion.
Loosely based on part of Dimitri Fontaine's ALTER EXTENSION UPGRADE
patch.
This patch adds the server infrastructure to support extensions.
There is still one significant loose end, namely how to make it play nice
with pg_upgrade, so I am not yet committing the changes that would make
all the contrib modules depend on this feature.
In passing, fix a disturbingly large amount of breakage in
AlterObjectNamespace() and callers.
Dimitri Fontaine, reviewed by Anssi Kääriäinen,
Itagaki Takahiro, Tom Lane, and numerous others
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
This feature allows a unique or pkey constraint to be created using an
already-existing unique index. While the constraint isn't very
functionally different from the bare index, it's nice to be able to do that
for documentation purposes. The main advantage over just issuing a plain
ALTER TABLE ADD UNIQUE/PRIMARY KEY is that the index can be created with
CREATE INDEX CONCURRENTLY, so that there is not a long interval where the
table is locked against updates.
On the way, refactor some of the code in DefineIndex() and index_create()
so that we don't have to pass through those functions in order to create
the index constraint's catalog entries. Also, in parse_utilcmd.c, pass
around the ParseState pointer in struct CreateStmtContext to save on
notation, and add error location pointers to some error reports that didn't
have one before.
Gurjeet Singh, reviewed by Steve Singer and Tom Lane
Foreign tables are a core component of SQL/MED. This commit does
not provide a working SQL/MED infrastructure, because foreign tables
cannot yet be queried. Support for foreign table scans will need to
be added in a future patch. However, this patch creates the necessary
system catalog structure, syntax support, and support for ancillary
operations such as COMMENT and SECURITY LABEL.
Shigeru Hanada, heavily revised by Robert Haas
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
This commit adds columns amoppurpose and amopsortfamily to pg_amop, and
column amcanorderbyop to pg_am. For the moment all the entries in
amcanorderbyop are "false", since the underlying support isn't there yet.
Also, extend the CREATE OPERATOR CLASS/ALTER OPERATOR FAMILY commands with
[ FOR SEARCH | FOR ORDER BY sort_operator_family ] clauses to allow the new
columns of pg_amop to be populated, and create pg_dump support for dumping
that information.
I also added some documentation, although it's perhaps a bit premature
given that the feature doesn't do anything useful yet.
Teodor Sigaev, Robert Haas, Tom Lane
Per my recent proposal, get rid of all the direct inspection of indexes
and manual generation of paths in planagg.c. Instead, set up
EquivalenceClasses for the aggregate argument expressions, and let the
regular path generation logic deal with creating paths that can satisfy
those sort orders. This makes planagg.c a bit more visible to the rest
of the planner than it was originally, but the approach is basically a lot
cleaner than before. A major advantage of doing it this way is that we get
MIN/MAX optimization on inheritance trees (using MergeAppend of indexscans)
practically for free, whereas in the old way we'd have had to add a whole
lot more duplicative logic.
One small disadvantage of this approach is that MIN/MAX aggregates can no
longer exploit partial indexes having an "x IS NOT NULL" predicate, unless
that restriction or something that implies it is specified in the query.
The previous implementation was able to use the added "x IS NOT NULL"
condition as an extra predicate proof condition, but in this version we
rely entirely on indexes that are considered usable by the main planning
process. That seems a fair tradeoff for the simplicity and functionality
gained.
The core of this patch is hash_array() and associated typcache
infrastructure, which works just about exactly like the existing support
for array comparison.
In addition I did some work to ensure that the planner won't think that an
array type is hashable unless its element type is hashable, and similarly
for sorting. This includes adding a datatype parameter to op_hashjoinable
and op_mergejoinable, and adding an explicit "hashable" flag to
SortGroupClause. The lack of a cross-check on the element type was a
pre-existing bug in mergejoin support --- but it didn't matter so much
before, because if you couldn't sort the element type there wasn't any good
alternative to failing anyhow. Now that we have the alternative of hashing
the array type, there are cases where we can avoid a failure by being picky
at the planner stage, so it's time to be picky.
The issue of exactly how to combine the per-element hash values to produce
an array hash is still open for discussion, but the rest of this is pretty
solid, so I'll commit it as-is.
After much expenditure of effort, we've got this to the point where the
performance penalty is pretty minimal in typical cases.
Andrew Dunstan, reviewed by Brendan Jurd, Dean Rasheed, and Tom Lane
This is not the hoped-for facility of using INSERT/UPDATE/DELETE inside
a WITH, but rather the other way around. It seems useful in its own
right anyway.
Note: catversion bumped because, although the contents of stored rules
might look compatible, there's actually a subtle semantic change.
A single Query containing a WITH and INSERT...VALUES now represents
writing the WITH before the INSERT, not before the VALUES. While it's
not clear that that matters to anyone, it seems like a good idea to
have it cited in the git history for catversion.h.
Original patch by Marko Tiikkaja, with updating and cleanup by
Hitoshi Harada.
This patch adds the SQL-standard concept of an INSTEAD OF trigger, which
is fired instead of performing a physical insert/update/delete. The
trigger function is passed the entire old and/or new rows of the view,
and must figure out what to do to the underlying tables to implement
the update. So this feature can be used to implement updatable views
using trigger programming style rather than rule hacking.
In passing, this patch corrects the names of some columns in the
information_schema.triggers view. It seems the SQL committee renamed
them somewhere between SQL:99 and SQL:2003.
Dean Rasheed, reviewed by Bernd Helmle; some additional hacking by me.
The point of a PlaceHolderVar is to allow a non-strict expression to be
evaluated below an outer join, after which its value bubbles up like a Var
and can be forced to NULL when the outer join's semantics require that.
However, there was a serious design oversight in that, namely that we
didn't ensure that there was actually a correct place in the plan tree
to evaluate the placeholder :-(. It may be necessary to delay evaluation
of an outer join to ensure that a placeholder that should be evaluated
below the join can be evaluated there. Per recent bug report from Kirill
Simonov.
Back-patch to 8.4 where the PlaceHolderVar mechanism was introduced.
This is intended as infrastructure to support integration with label-based
mandatory access control systems such as SE-Linux. Further changes (mostly
hooks) will be needed, but this is a big chunk of it.
KaiGai Kohei and Robert Haas
The implicitly created sequence was created as owned by the current user,
who could be different from the table owner, eg if current user is a
superuser or some member of the table's owning role. This caused sanity
checks in the SEQUENCE OWNED BY code to spit up. Although possibly we
don't need those sanity checks, the safest fix seems to be to make sure
the implicit sequence is assigned the same owner role as the table has.
(We still do all permissions checks as the current user, however.)
Per report from Josh Berkus.
Back-patch to 9.0. The bug goes back to the invention of SEQUENCE OWNED BY
in 8.2, but the fix requires an API change for DefineRelation(), which seems
to have potential for breaking third-party code if done in a minor release.
Given the lack of prior complaints, it's probably not worth fixing in the
stable branches.
other columns to be referenced without listing them in GROUP BY, so long as
the primary key column(s) are listed in GROUP BY.
Eventually we should also allow functional dependency on a UNIQUE constraint
when the columns are marked NOT NULL, but that has to wait until NOT NULL
constraints are represented in pg_constraint, because we need to have
pg_constraint OIDs for all the conditions needed to ensure functional
dependency.
Peter Eisentraut, reviewed by Alex Hunsaker and Tom Lane
This operates in the same way as other CREATE OR REPLACE commands, ie,
it replaces everything but the ownership and ACL lists of an existing
entry, and requires the caller to have owner privileges for that entry.
While modifying an existing language has some use in development scenarios,
in typical usage all the "replaced" values come from pg_pltemplate so there
will be no actual change in the language definition. The reason for adding
this is mainly to allow programs to ensure that a language exists without
triggering an error if it already does exist.
This commit just adds and documents the new option. A followon patch
will use it to clean up some unpleasant cases in pg_dump and pg_regress.
In addition, add support for a "payload" string to be passed along with
each notify event.
This implementation should be significantly more efficient than the old one,
and is also more compatible with Hot Standby usage. There is not yet any
facility for HS slaves to receive notifications generated on the master,
although such a thing is possible in future.
Joachim Wieland, reviewed by Jeff Davis; also hacked on by me.
This patch allows the frame to start from CURRENT ROW (in either RANGE or
ROWS mode), and it also adds support for ROWS n PRECEDING and ROWS n FOLLOWING
start and end points. (RANGE value PRECEDING/FOLLOWING isn't there yet ---
the grammar works, but that's all.)
Hitoshi Harada, reviewed by Pavel Stehule
This patch only supports seq_page_cost and random_page_cost as parameters,
but it provides the infrastructure to scalably support many more.
In particular, we may want to add support for effective_io_concurrency,
but I'm leaving that as future work for now.
Thanks to Tom Lane for design help and Alvaro Herrera for the review.
8.2beta but never carried out. This avoids repetitive tests of whether the
argument is of scalar or composite type. Also, be a bit more paranoid about
composite arguments in some places where we previously weren't checking.
Index expression columns are now named after the FigureColname result for
their expressions, rather than always being "pg_expression_N". Digits are
appended to this name if needed to make the column name unique within the
index. (That happens for regular columns too, thus fixing the old problem
that CREATE INDEX fooi ON foo (f1, f1) fails. Before exclusion indexes
there was no real reason to do such a thing, but now maybe there is.)
Default names for indexes and associated constraints now include the column
names of all their columns, not only the first one as in previous practice.
(Of course, this will be truncated as needed to fit in NAMEDATALEN. Also,
pkey indexes retain the historical behavior of not naming specific columns
at all.)
An example of the results:
regression=# create table foo (f1 int, f2 text,
regression(# exclude (f1 with =, lower(f2) with =));
NOTICE: CREATE TABLE / EXCLUDE will create implicit index "foo_f1_lower_exclusion" for table "foo"
CREATE TABLE
regression=# \d foo_f1_lower_exclusion
Index "public.foo_f1_lower_exclusion"
Column | Type | Definition
--------+---------+------------
f1 | integer | f1
lower | text | lower(f2)
btree, for table "public.foo"
non-kluge method for controlling the order in which values are fed to an
aggregate function. At the same time eliminate the old implementation
restriction that DISTINCT was only supported for single-argument aggregates.
Possibly release-notable behavioral change: formerly, agg(DISTINCT x)
dropped null values of x unconditionally. Now, it does so only if the
agg transition function is strict; otherwise nulls are treated as DISTINCT
normally would, ie, you get one copy.
Andrew Gierth, reviewed by Hitoshi Harada
support any indexable commutative operator, not just equality. Two rows
violate the exclusion constraint if "row1.col OP row2.col" is TRUE for
each of the columns in the constraint.
Jeff Davis, reviewed by Robert Haas
checked to determine whether the trigger should be fired.
For BEFORE triggers this is mostly a matter of spec compliance; but for AFTER
triggers it can provide a noticeable performance improvement, since queuing of
a deferred trigger event and re-fetching of the row(s) at end of statement can
be short-circuited if the trigger does not need to be fired.
Takahiro Itagaki, reviewed by KaiGai Kohei.
adopted for EXPLAIN. This will allow additional options to be implemented
in future without having to make them fully-reserved keywords. The old syntax
remains available for existing options, however.
Itagaki Takahiro
underneath the Limit node, not atop it. This fixes the old problem that such
a query might unexpectedly return fewer rows than the LIMIT says, due to
LockRows discarding updated rows.
There is a related problem that LockRows might destroy the sort ordering
produced by earlier steps; but fixing that by pushing LockRows below Sort
would create serious performance problems that are unjustified in many
real-world applications, as well as potential deadlock problems from locking
many more rows than expected. Instead, keep the present semantics of applying
FOR UPDATE after ORDER BY within a single query level; but allow the user to
specify the other way by writing FOR UPDATE in a sub-select. To make that
work, track whether FOR UPDATE appeared explicitly in sub-selects or got
pushed down from the parent, and don't flatten a sub-select that contained an
explicit FOR UPDATE.
a lot of strange behaviors that occurred in join cases. We now identify the
"current" row for every joined relation in UPDATE, DELETE, and SELECT FOR
UPDATE/SHARE queries. If an EvalPlanQual recheck is necessary, we jam the
appropriate row into each scan node in the rechecking plan, forcing it to emit
only that one row. The former behavior could rescan the whole of each joined
relation for each recheck, which was terrible for performance, and what's much
worse could result in duplicated output tuples.
Also, the original implementation of EvalPlanQual could not re-use the recheck
execution tree --- it had to go through a full executor init and shutdown for
every row to be tested. To avoid this overhead, I've associated a special
runtime Param with each LockRows or ModifyTable plan node, and arranged to
make every scan node below such a node depend on that Param. Thus, by
signaling a change in that Param, the EPQ machinery can just rescan the
already-built test plan.
This patch also adds a prohibition on set-returning functions in the
targetlist of SELECT FOR UPDATE/SHARE. This is needed to avoid the
duplicate-output-tuple problem. It seems fairly reasonable since the
other restrictions on SELECT FOR UPDATE are meant to ensure that there
is a unique correspondence between source tuples and result tuples,
which an output SRF destroys as much as anything else does.
are named in the UPDATE's SET list.
Note: the schema of pg_trigger has not actually changed; we've just started
to use a column that was there all along. catversion bumped anyway so that
this commit is included in the history of potentially interesting changes
to system catalog contents.
Itagaki Takahiro
execMain.c and into a new plan node type LockRows. Like the recent change
to put table updating into a ModifyTable plan node, this increases planning
flexibility by allowing the operations to occur below the top level of the
plan tree. It's necessary in any case to restore the previous behavior of
having FOR UPDATE locking occur before ModifyTable does.
This partially refactors EvalPlanQual to allow multiple rows-under-test
to be inserted into the EPQ machinery before starting an EPQ test query.
That isn't sufficient to fix EPQ's general bogosity in the face of plans
that return multiple rows per test row, though. Since this patch is
mostly about getting some plan node infrastructure in place and not about
fixing ten-year-old bugs, I will leave EPQ improvements for another day.
Another behavioral change that we could now think about is doing FOR UPDATE
before LIMIT, but that too seems like it should be treated as a followon
patch.
Create a new catalog pg_db_role_setting where they are now stored, and better
encapsulate the code that deals with settings into its realm. The old
datconfig and rolconfig columns are removed.
psql has gained a \drds command to display the settings.
Backwards compatibility warning: while the backwards-compatible system views
still have the config columns, they no longer completely represent the
configuration for a user or database.
Catalog version bumped.
inheritance parent tables are compared using equal(), instead of doing
strcmp() on the nodeToString representation. The old implementation was
always a tad cheesy, and it finally fails completely as of 8.4, now that the
node tree might contain syntax location information. equal() knows it's
supposed to ignore those fields, but strcmp() hardly can. Per recent
report from Scott Ribe.
the privileges that will be applied to subsequently-created objects.
Such adjustments are always per owning role, and can be restricted to objects
created in particular schemas too. A notable benefit is that users can
override the traditional default privilege settings, eg, the PUBLIC EXECUTE
privilege traditionally granted by default for functions.
Petr Jelinek
to create a function for it.
Procedural languages now have an additional entry point, namely a function
to execute an inline code block. This seemed a better design than trying
to hide the transient-ness of the code from the PL. As of this patch, only
plpgsql has an inline handler, but probably people will soon write handlers
for the other standard PLs.
In passing, remove the long-dead LANCOMPILER option of CREATE LANGUAGE.
Petr Jelinek
This was foreseen to be a good idea long ago, but nobody had got round
to doing it. The recent patch for deferred unique constraints made
transformConstraintAttrs() ugly enough that I decided it was time.
This change will also greatly simplify parsing of deferred CHECK constraints,
if anyone ever gets around to implementing that.
While at it, add a location field to Constraint, and use that to provide
an error cursor for some of the constraint-related error messages.
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
The original syntax made it difficult to add options without making them
into reserved words. This change parenthesizes the options to avoid that
problem, and makes provision for an explicit (and perhaps non-Boolean)
value for each option. The original syntax is still supported, but only
for the two original options ANALYZE and VERBOSE.
As a test case, add a COSTS option that can suppress the planner cost
estimates. This may be useful for including EXPLAIN output in the regression
tests, which are otherwise unable to cope with cross-platform variations in
cost estimates.
Robert Haas
This alters various incidental uses of C++ key words to use other similar
identifiers, so that a C++ compiler won't choke outright. You still
(probably) need extern "C" { }; around the inclusion of backend headers.
based on a patch by Kurt Harriman <harriman@acm.org>
Also add a script cpluspluscheck to check for C++ compatibility in the
future. As of right now, this passes without error for me.
types in CREATE TRIGGER. While at it, clean up the amazingly tedious and
inextensible way that the trigger event type list was handled. Per report
from Greg Sabino Mullane.
constants through full joins, as in
select * from tenk1 a full join tenk1 b using (unique1)
where unique1 = 42;
which should generate a fairly cheap plan where we apply the constraint
unique1 = 42 in each relation scan. This had been broken by my patch of
2008-06-27, which is now reverted in favor of a more invasive but hopefully
less incorrect approach. That patch was meant to prevent incorrect extraction
of OR'd indexclauses from OR conditions above an outer join. To do that
correctly we need more information than the outerjoin_delay flag can provide,
so add a nullable_relids field to RestrictInfo that records exactly which
relations are nulled by outer joins that are underneath a particular qual
clause. A side benefit is that we can make the test in create_or_index_quals
more specific: it is now smart enough to extract an OR'd indexclause into the
outer side of an outer join, even though it must not do so in the inner side.
The old coding couldn't distinguish these cases so it could not do either.
are individually labeled, rather than just grouped under an "InitPlan"
or "SubPlan" heading. This in turn makes it possible for decompilation of
a subplan reference to usefully identify which subplan it's referencing.
I also made InitPlans identify which parameter symbol(s) they compute,
so that references to those parameters elsewhere in the plan tree can
be connected to the initplan that will be executed. Per a gripe from
Robert Haas about EXPLAIN output of a WITH query being inadequate,
plus some longstanding pet peeves of my own.
of adding optional namespace and action fields to DefElem. Having three
node types that do essentially the same thing bloats the code and leads
to errors of confusion, such as in yesterday's bug report from Khee Chin.
for consistency with the (relatively) recent addition of typmod to SubLink.
An example of why it's a good idea is to be seen in the recent "failed to
locate grouping columns" bug, which wouldn't have happened if a SubPlan
exposed the same typmod info as the SubLink it was derived from.
This could be back-patched, since it doesn't affect any on-disk data format,
but for the moment it doesn't seem necessary to do so.
making pull_up_sublinks() construct a full-blown JoinExpr tree representation
of IN/EXISTS SubLinks that it is able to convert to semi or anti joins.
This makes pull_up_sublinks() a shade more complex, but the gain in semantic
clarity is worth it. I still have more to do in this area to address the
previously-discussed problems, but this commit in itself fixes at least one
bug in HEAD, as shown by added regression test case.
wrappers (similar to procedural languages). This way we don't need to retain
the nearly empty libraries, and we are more free in how to implement the
wrapper API in the future.
qualifier, and add support for this in pg_dump.
This allows TOAST tables to have user-defined fillfactor, and will also
enable us to move the autovacuum parameters to reloptions without taking
away the possibility of setting values for TOAST tables.
patch. This includes the ability to force the frame to cover the whole
partition, and the ability to make the frame end exactly on the current row
rather than its last ORDER BY peer. Supporting any more of the full SQL
frame-clause syntax will require nontrivial hacking on the window aggregate
code, so it'll have to wait for 8.5 or beyond.
This doesn't do any remote or external things yet, but it gives modules
like plproxy and dblink a standardized and future-proof system for
managing their connection information.
Martin Pihlak and Peter Eisentraut
the visibility map patch that because autovacuum always sets
VacuumStmt->freeze_min_age, visibility map was never used for autovacuum,
only for manually launched vacuums. This patch introduces a new scan_all
field to VacuumStmt, indicating explicitly whether the visibility map
should be used, or the whole relation should be scanned, to advance
relfrozenxid. Anti-wraparound vacuums still need to scan all pages.
return the tableoid as well as the ctid for any FOR UPDATE targets that
have child tables. All child tables are listed in the ExecRowMark list,
but the executor just skips the ones that didn't produce the current row.
Curiously, this longstanding restriction doesn't seem to have been documented
anywhere; so no doc changes.
we extended the appendrel mechanism to support UNION ALL optimization. The
reason nobody noticed was that we are not actually using attr_needed data for
appendrel children; hence it seems more reasonable to rip it out than fix it.
Back-patch to 8.2 because an Assert failure is possible in corner cases.
Per examination of an example from Jim Nasby.
In HEAD, also get rid of AppendRelInfo.col_mappings, which is quite inadequate
to represent UNION ALL situations; depend entirely on translated_vars instead.
that represent some expression that we desire to compute below the top level
of the plan, and then let that value "bubble up" as though it were a plain
Var (ie, a column value).
The immediate application is to allow sub-selects to be flattened even when
they are below an outer join and have non-nullable output expressions.
Formerly we couldn't flatten because such an expression wouldn't properly
go to NULL when evaluated above the outer join. Now, we wrap it in a
PlaceHolderVar and arrange for the actual evaluation to occur below the outer
join. When the resulting Var bubbles up through the join, it will be set to
NULL if necessary, yielding the correct results. This fixes a planner
limitation that's existed since 7.1.
In future we might want to use this mechanism to re-introduce some form of
Hellerstein's "expensive functions" optimization, ie place the evaluation of
an expensive function at the most suitable point in the plan tree.
the column alias names of the RTE referenced by the Var to the RowExpr.
This is needed to allow ruleutils.c to correctly deparse FieldSelect nodes
referencing such a construct. Per my recent bug report.
Adding a field to RowExpr forces initdb (because of stored rules changes)
so this solution is not back-patchable; which is unfortunate because 8.2
and 8.3 have this issue. But it only affects EXPLAIN for some pretty odd
corner cases, so we can probably live without a solution for the back
branches.
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
SELECT foo.*) so that it cannot be confused with a quoted identifier "*".
Instead create a separate node type A_Star to represent this notation.
Per pgsql-hackers discussion of 2007-Sep-27.
most node types used in expression trees (both before and after parse
analysis). This allows us to place an error cursor in many situations
where we formerly could not, because the information wasn't available
beyond the very first level of parse analysis. There's a fair amount
of work still to be done to persuade individual ereport() calls to actually
include an error location, but this gets the initdb-forcing part of the
work out of the way; and the situation is already markedly better than
before for complaints about unimplementable implicit casts, such as
CASE and UNION constructs with incompatible alternative data types.
Per my proposal of a few days ago.
subqueries into the same thing you'd have gotten from IN (except always with
unknownEqFalse = true, so as to get the proper semantics for an EXISTS).
I believe this fixes the last case within CVS HEAD in which an EXISTS could
give worse performance than an equivalent IN subquery.
The tricky part of this is that if the upper query probes the EXISTS for only
a few rows, the hashing implementation can actually be worse than the default,
and therefore we need to make a cost-based decision about which way to use.
But at the time when the planner generates plans for subqueries, it doesn't
really know how many times the subquery will be executed. The least invasive
solution seems to be to generate both plans and postpone the choice until
execution. Therefore, in a query that has been optimized this way, EXPLAIN
will show two subplans for the EXISTS, of which only one will actually get
executed.
There is a lot more that could be done based on this infrastructure: in
particular it's interesting to consider switching to the hash plan if we start
out using the non-hashed plan but find a lot more upper rows going by than we
expected. I have therefore left some minor inefficiencies in place, such as
initializing both subplans even though we will currently only use one.
the old JOIN_IN code, but antijoins are new functionality.) Teach the planner
to convert appropriate EXISTS and NOT EXISTS subqueries into semi and anti
joins respectively. Also, LEFT JOINs with suitable upper-level IS NULL
filters are recognized as being anti joins. Unify the InClauseInfo and
OuterJoinInfo infrastructure into "SpecialJoinInfo". With that change,
it becomes possible to associate a SpecialJoinInfo with every join attempt,
which permits some cleanup of join selectivity estimation. That needs to be
taken much further than this patch does, but the next step is to change the
API for oprjoin selectivity functions, which seems like material for a
separate patch. So for the moment the output size estimates for semi and
especially anti joins are quite bogus.
but seem like a separate patch since most of the remaining work is on the
executor side.) I took the opportunity to push selection of the grouping
operators for set operations into the parser where it belongs. Otherwise this
is just a small exercise in making prepunion.c consider both alternatives.
As with the recent DISTINCT patch, this means we can UNION on datatypes that
can hash but not sort, and it means that UNION without ORDER BY is no longer
certain to produce sorted output.
as per my recent proposal:
1. Fold SortClause and GroupClause into a single node type SortGroupClause.
We were already relying on them to be struct-equivalent, so using two node
tags wasn't accomplishing much except to get in the way of comparing items
with equal().
2. Add an "eqop" field to SortGroupClause to carry the associated equality
operator. This is cheap for the parser to get at the same time it's looking
up the sort operator, and storing it eliminates the need for repeated
not-so-cheap lookups during planning. In future this will also let us
represent GROUP/DISTINCT operations on datatypes that have hash opclasses
but no btree opclasses (ie, they have equality but no natural sort order).
The previous representation simply didn't work for that, since its only
indicator of comparison semantics was a sort operator.
3. Add a hasDistinctOn boolean to struct Query to explicitly record whether
the distinctClause came from DISTINCT or DISTINCT ON. This allows removing
some complicated and not 100% bulletproof code that attempted to figure
that out from the distinctClause alone.
This patch doesn't in itself create any new capability, but it's necessary
infrastructure for future attempts to use hash-based grouping for DISTINCT
and UNION/INTERSECT/EXCEPT.
so long as all the trailing arguments are of the same (non-array) type.
The function receives them as a single array argument (which is why they
have to all be the same type).
It might be useful to extend this facility to aggregates, but this patch
doesn't do that.
This patch imposes a noticeable slowdown on function lookup --- a follow-on
patch will fix that by adding a redundant column to pg_proc.
Pavel Stehule
sequence to be reset to its original starting value. This requires adding the
original start value to the set of parameters (columns) of a sequence object,
which is a user-visible change with potential compatibility implications;
it also forces initdb.
Also add hopefully-SQL-compatible RESTART/CONTINUE IDENTITY options to
TRUNCATE TABLE. RESTART IDENTITY executes ALTER SEQUENCE RESTART for all
sequences "owned by" any of the truncated relations. CONTINUE IDENTITY is
a no-op option.
Zoltan Boszormenyi
"consistent" functions, and remove pg_amop.opreqcheck, as per recent
discussion. The main immediate benefit of this is that we no longer need
8.3's ugly hack of requiring @@@ rather than @@ to test weight-using tsquery
searches on GIN indexes. In future it should be possible to optimize some
other queries better than is done now, by detecting at runtime whether the
index match is exact or not.
Tom Lane, after an idea of Heikki's, and with some help from Teodor.
directly to all the member expressions, instead of the previous implementation
where the ARRAY[] constructor would infer a common element type and then we'd
coerce the finished array after the fact. This has a number of benefits,
one being that we can allow an empty ARRAY[] construct so long as its
element type is specified by such a cast.
Brendan Jurd, minor fixes by me.
AlterTSConfigurationStmt. All utility statement node types are expected
to be supported here, though they do not have to have outfuncs/readfuncs
support. Found by running regression tests with COPY_PARSE_PLAN_TREES
enabled.
constraint status of copied indexes (bug #3774), as well as various other
small bugs such as failure to pstrdup when needed. Allow INCLUDING INDEXES
indexes to be merged with identical declared indexes (perhaps not real useful,
but the code is there and having it not apply to LIKE indexes seems pretty
unorthogonal). Avoid useless work in generateClonedIndexStmt(). Undo some
poorly chosen API changes, and put a couple of routines in modules that seem
to be better places for them.
(Actually, it works as a plain statement too, but I didn't document that
because it seems a bit useless.) Unify VariableResetStmt with
VariableSetStmt, and clean up some ancient cruft in the representation of
same.
sets for outer joins, in the light of bug #3588 and additional thought and
experimentation. The original methodology was fatally flawed for nests of
more than two outer joins: it got the relationships between adjacent joins
right, but didn't always come to the right conclusions about whether a join
could be interchanged with one two or more levels below it. This was largely
caused by a mistaken idea that we should use the min_lefthand + min_righthand
sets of a sub-join as the minimum left or right input set of an upper join
when we conclude that the sub-join can't commute with the upper one. If
there's a still-lower join that the sub-join *can* commute with, this method
led us to think that that one could commute with the topmost join; which it
can't. Another problem (not directly connected to bug #3588) was that
make_outerjoininfo's processing-order-dependent method for enforcing outer
join identity #3 didn't work right: if we decided that join A could safely
commute with lower join B, we dropped all information about sub-joins under B
that join A could perhaps not safely commute with, because we removed B's
entire min_righthand from A's.
To fix, make an explicit computation of all inner join combinations that occur
below an outer join, and add to that the full syntactic relsets of any lower
outer joins that we determine it can't commute with. This method gives much
more direct enforcement of the outer join rearrangement identities, and it
turns out not to cost a lot of additional bookkeeping.
Thanks to Richard Harris for the bug report and test case.
with a plpgsql-defined cursor. The underlying mechanism for this is that the
main SQL engine will now take "WHERE CURRENT OF $n" where $n is a refcursor
parameter. Not sure if we should document that fact or consider it an
implementation detail. Per discussion with Pavel Stehule.
Along the way, allow FOR UPDATE in non-WITH-HOLD cursors; there may once
have been a reason to disallow that, but it seems to work now, and it's
really rather necessary if you want to select a row via a cursor and then
update it in a concurrent-safe fashion.
Original patch by Arul Shaji, rather heavily editorialized by Tom Lane.
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
in cases where a sub-SELECT inserts a WHERE clause between two outer joins,
that clause may prevent us from re-ordering the two outer joins. The code
was considering only the joins' own ON-conditions in determining reordering
safety, which is not good enough. Add a "delay_upper_joins" flag to
OuterJoinInfo to flag that we have detected such a clause and higher-level
outer joins shouldn't be permitted to commute with this one. (This might
seem overly coarse, but given the current rules for OJ reordering, it's
sufficient AFAICT.)
The failure case is actually pretty narrow: it needs a WHERE clause within
the RHS of a left join that checks the RHS of a lower left join, but is not
strict for that RHS (else we'd have simplified the lower join to a plain
join). Even then no failure will be manifest unless the planner chooses to
rearrange the join order.
Per bug report from Adam Terrey.
types of unspecified parameters when submitted via extended query protocol.
This worked in 8.2 but I had broken it during plancache changes. DECLARE
CURSOR is now treated almost exactly like a plain SELECT through parse
analysis, rewrite, and planning; only just before sending to the executor
do we divert it away to ProcessUtility. This requires a special-case check
in a number of places, but practically all of them were already special-casing
SELECT INTO, so it's not too ugly. (Maybe it would be a good idea to merge
the two by treating IntoClause as a form of utility statement? Not going to
worry about that now, though.) That approach doesn't work for EXPLAIN,
however, so for that I punted and used a klugy solution of running parse
analysis an extra time if under extended query protocol.
RESET SESSION, RESET PLANS, and RESET TEMP are now DISCARD ALL,
DISCARD PLANS, and DISCARD TEMP, respectively. This is to avoid
confusion with the pre-existing RESET variants: the DISCARD
commands are not actually similar to RESET. Patch from Marko
Kreen, with some minor editorialization.
seen by code inspecting the expression. The best way to do this seems
to be to drop the original representation as a function invocation, and
instead make a special expression node type that represents applying
the element-type coercion function to each array element. In this way
the element function is exposed and will be checked for volatility.
Per report from Guillaume Smet.
available information about the typmod of an expression; namely, Const,
ArrayRef, ArrayExpr, and EXPR and ARRAY SubLinks. In the ArrayExpr and
SubLink cases it wasn't really the data structure's fault, but exprTypmod()
being lazy. This seems like a good idea in view of the expected increase in
typmod usage from Teodor's work to allow user-defined types to have typmods.
In particular this responds to the concerns we had about eliminating the
special-purpose hack that exprTypmod() used to have for BPCHAR Consts.
We can now tell whether or not such a Const has been cast to a specific
length, and report or display properly if so.
initdb forced due to changes in stored rules.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
useless substructure for its RangeTblEntry nodes. (I chose to keep using the
same struct node type and just zero out the link fields for unneeded info,
rather than making a separate ExecRangeTblEntry type --- it seemed too
fragile to have two different rangetable representations.)
Along the way, put subplans into a list in the toplevel PlannedStmt node,
and have SubPlan nodes refer to them by list index instead of direct pointers.
Vadim wanted to do that years ago, but I never understood what he was on about
until now. It makes things a *whole* lot more robust, because we can stop
worrying about duplicate processing of subplans during expression tree
traversals. That's been a constant source of bugs, and it's finally gone.
There are some consequent simplifications yet to be made, like not using
a separate EState for subplans in the executor, but I'll tackle that later.
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
observe the xmloption.
Reorganize the representation of the XML option in the parse tree and the
API to make it easier to manage and understand.
Add regression tests for parsing back XML expressions.
FAMILY; and add FAMILY option to CREATE OPERATOR CLASS to allow adding a
class to a pre-existing family. Per previous discussion. Man, what a
tedious lot of cutting and pasting ...
representation of equivalence classes of variables. This is an extensive
rewrite, but it brings a number of benefits:
* planner no longer fails in the presence of "incomplete" operator families
that don't offer operators for every possible combination of datatypes.
* avoid generating and then discarding redundant equality clauses.
* remove bogus assumption that derived equalities always use operators
named "=".
* mergejoins can work with a variety of sort orders (e.g., descending) now,
instead of tying each mergejoinable operator to exactly one sort order.
* better recognition of redundant sort columns.
* can make use of equalities appearing underneath an outer join.
which comparison operators to use for plan nodes involving tuple comparison
(Agg, Group, Unique, SetOp). Formerly the executor looked up the default
equality operator for the datatype, which was really pretty shaky, since it's
possible that the data being fed to the node is sorted according to some
nondefault operator class that could have an incompatible idea of equality.
The planner knows what it has sorted by and therefore can provide the right
equality operator to use. Also, this change moves a couple of catalog lookups
out of the executor and into the planner, which should help startup time for
pre-planned queries by some small amount. Modify the planner to remove some
other cavalier assumptions about always being able to use the default
operators. Also add "nulls first/last" info to the Plan node for a mergejoin
--- neither the executor nor the planner can cope yet, but at least the API is
in place.
per-column options for btree indexes. The planner's support for this is still
pretty rudimentary; it does not yet know how to plan mergejoins with
nondefault ordering options. The documentation is pretty rudimentary, too.
I'll work on improving that stuff later.
Note incompatible change from prior behavior: ORDER BY ... USING will now be
rejected if the operator is not a less-than or greater-than member of some
btree opclass. This prevents less-than-sane behavior if an operator that
doesn't actually define a proper sort ordering is selected.
the XmlExpr code in various lists, use a representation that has some hope
of reverse-listing correctly (though it's still a de-escaping function
shy of correctness), generally try to make it look more like Postgres
coding conventions.
cases. Operator classes now exist within "operator families". While most
families are equivalent to a single class, related classes can be grouped
into one family to represent the fact that they are semantically compatible.
Cross-type operators are now naturally adjunct parts of a family, without
having to wedge them into a particular opclass as we had done originally.
This commit restructures the catalogs and cleans up enough of the fallout so
that everything still works at least as well as before, but most of the work
needed to actually improve the planner's behavior will come later. Also,
there are not yet CREATE/DROP/ALTER OPERATOR FAMILY commands; the only way
to create a new family right now is to allow CREATE OPERATOR CLASS to make
one by default. I owe some more documentation work, too. But that can all
be done in smaller pieces once this infrastructure is in place.
representing externally-supplied values, since the APIs that carry such
values only specify type not typmod. However, for PARAM_SUBLINK Params
it is handy to carry the typmod of the sublink's output column. This
is a much cleaner solution for the recently reported 'could not find
pathkey item to sort' and 'failed to find unique expression in subplan
tlist' bugs than my original 8.2-compatible patch. Besides, someday we
might want to support typmods for external parameters ...
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
by abandoning the idea that it should say SERIAL in the dump. Instead,
dump serial sequences and column defaults just like regular ones.
Add a new backend command ALTER SEQUENCE OWNED BY to let pg_dump recreate
the sequence-to-column dependency that was formerly created "behind the
scenes" by SERIAL. This restores SERIAL to being truly "just a macro"
consisting of component operations that can be stated explicitly in SQL.
Furthermore, the new command allows sequence ownership to be reassigned,
so that old mistakes can be cleaned up.
Also, downgrade the OWNED-BY dependency from INTERNAL to AUTO, since there
is no longer any very compelling argument why the sequence couldn't be
dropped while keeping the column. (This forces initdb, to be sure the
right kinds of dependencies are in there.)
Along the way, add checks to prevent ALTER OWNER or SET SCHEMA on an
owned sequence; you can now only do this indirectly by changing the
owning table's owner or schema. This is an oversight in previous
releases, but probably not worth back-patching.
plpgsql support to come later. Along the way, convert execMain's
SELECT INTO support into a DestReceiver, in order to eliminate some ugly
special cases.
Jonah Harris and Tom Lane
same data type and same typmod, we show that typmod as the output
typmod, rather than generic -1. This responds to several complaints
over the past few years about UNIONs unexpectedly dropping length or
precision info.
(e.g. "INSERT ... VALUES (...), (...), ...") and elsewhere as allowed
by the spec. (e.g. similar to a FROM clause subselect). initdb required.
Joe Conway and Tom Lane.
the opportunity to treat COUNT(*) as a zero-argument aggregate instead
of the old hack that equated it to COUNT(1); this is materially cleaner
(no more weird ANYOID cases) and ought to be at least a tiny bit faster.
Original patch by Sergey Koposov; review, documentation, simple regression
tests, pg_dump and psql support by moi.
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
the read lock we hold on the table's parent relation until commit.
Update equalfuncs.c for the new field in AlterTableCmd. Various
improvements to comments, variable names, and error reporting.
There is room for further improvement here, but this is at least
a step in the right direction.
support both FOR UPDATE and FOR SHARE in one command, as well as both
NOWAIT and normal WAIT behavior. The more general code is actually
simpler and cleaner.
not named ones, and replace linear searches of the list with array indexing.
The named-parameter support has been dead code for many years anyway,
and recent profiling suggests that the searching was costing a noticeable
amount of performance for complex queries.
CREATE AGGREGATE aggname (input_type) (parameter_list)
along with the old syntax where the input type was named in the parameter
list. This fits more naturally with the way that the aggregate is identified
in DROP AGGREGATE and other utility commands; furthermore it has a natural
extension to handle multiple-input aggregates, where the basetype-parameter
method would get ugly. In fact, this commit fixes the grammar and all the
utility commands to support multiple-input aggregates; but DefineAggregate
rejects it because the executor isn't fixed yet.
I didn't do anything about treating agg(*) as a zero-input aggregate instead
of artificially making it a one-input aggregate, but that should be considered
in combination with supporting multi-input aggregates.
The original coding stored the raw parser output (ColumnDef and TypeName
nodes) which was ugly, bulky, and wrong because it failed to create any
dependency on the referenced datatype --- and in fact would not track type
renamings and suchlike. Instead store a list of column type OIDs in the
RTE.
Also fix up general failure of recordDependencyOnExpr to do anything sane
about recording dependencies on datatypes. While there are many cases where
there will be an indirect dependency (eg if an operator returns a datatype,
the dependency on the operator is enough), we do have to record the datatype
as a separate dependency in examples like CoerceToDomain.
initdb forced because of change of stored rules.
during parse analysis, not only errors detected in the flex/bison stages.
This is per my earlier proposal. This commit includes all the basic
infrastructure, but locations are only tracked and reported for errors
involving column references, function calls, and operators. More could
be done later but this seems like a good set to start with. I've also
moved the ReportSyntaxErrorPosition logic out of psql and into libpq,
which should make it available to more people --- even within psql this
is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
inheritance trees on-the-fly, which pretty well constrained us to considering
only one way of planning inheritance, expand inheritance sets during the
planner prep phase, and build a side data structure that can be consulted
later to find which RTEs are members of which inheritance sets. As proof of
concept, use the data structure to plan joins against inheritance sets more
efficiently: we can now use indexes on the set members in inner-indexscan
joins. (The generated plans could be improved further, but it'll take some
executor changes.) This data structure will also support handling UNION ALL
subqueries in the same way as inheritance sets, but that aspect of it isn't
finished yet.
(previously we only did = and <> correctly). Also, allow row comparisons
with any operators that are in btree opclasses, not only those with these
specific names. This gets rid of a whole lot of indefensible assumptions
about the behavior of particular operators based on their names ... though
it's still true that IN and NOT IN expand to "= ANY". The patch adds a
RowCompareExpr expression node type, and makes some changes in the
representation of ANY/ALL/ROWCOMPARE SubLinks so that they can share code
with RowCompareExpr.
I have not yet done anything about making RowCompareExpr an indexable
operator, but will look at that soon.
initdb forced due to changes in stored rules.
Per my recent proposal. I ended up basing the implementation on the
existing mechanism for enforcing valid join orders of IN joins --- the
rules for valid outer-join orders are somewhat similar.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
process of dropping roles by dropping objects owned by them and privileges
granted to them, or giving the owned objects to someone else, through the
use of the data stored in the new pg_shdepend catalog.
Some refactoring of the GRANT/REVOKE code was needed, as well as ALTER OWNER
code. Further cleanup of code duplication in the GRANT code seems necessary.
Implemented by me after an idea from Tom Lane, who also provided various kind
of implementation advice.
Regression tests pass. Some tests for the new functionality are also added,
as well as rudimentary documentation.
sense and rename to "outerjoin_delayed" to more clearly reflect what it
means). I had decided that it was redundant in 8.1, but the folly of this
is exposed by a bug report from Sebastian Böck. The place where it's
needed is to prevent orindxpath.c from cherry-picking arms of an outer-join
OR clause to form a relation restriction that isn't actually legal to push
down to the relation scan level. There may be some legal cases that this
forbids optimizing, but we'd need much closer analysis to determine it.
doesn't automatically inherit the privileges of roles it is a member of;
for such a role, membership in another role can be exploited only by doing
explicit SET ROLE. The default inherit setting is TRUE, so by default
the behavior doesn't change, but creating a user with NOINHERIT gives closer
adherence to our current reading of SQL99. Documentation still lacking,
and I think the information schema needs another look.
propagated inside an outer join. In particular, given
LEFT JOIN ON (A = B) WHERE A = constant, we cannot conclude that
B = constant at the top level (B might be null instead), but we
can nonetheless put a restriction B = constant into the quals for
B's relation, since no inner-side rows not meeting that condition
can contribute to the final result. Similarly, given
FULL JOIN USING (J) WHERE J = constant, we can't directly conclude
that either input J variable = constant, but it's OK to push such
quals into each input rel. Per recent gripe from Kim Bisgaard.
Along the way, remove 'valid_everywhere' flag from RestrictInfo,
as on closer analysis it was not being used for anything, and was
defined backwards anyway.
and pg_auth_members. There are still many loose ends to finish in this
patch (no documentation, no regression tests, no pg_dump support for
instance). But I'm going to commit it now anyway so that Alvaro can
make some progress on shared dependencies. The catalog changes should
be pretty much done.
in the database. The old behavior (reindex system catalogs only) is now
available as REINDEX SYSTEM. I did not add the complementary REINDEX USER
case since there did not seem to be consensus for this, but it would be
trivial to add later. Per recent discussions.
of a relation in a flat 'joininfo' list. The former arrangement grouped
the join clauses according to the set of unjoined relids used in each;
however, profiling on test cases involving lots of joins proves that
that data structure is a net loss. It takes more time to group the
join clauses together than is saved by avoiding duplicate tests later.
It doesn't help any that there are usually not more than one or two
clauses per group ...
a new PlannerInfo struct, which is passed around instead of the bare
Query in all the planning code. This commit is essentially just a
code-beautification exercise, but it does open the door to making
larger changes to the planner data structures without having to muck
with the widely-known Query struct.
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
in UPDATE. We also now issue a NOTICE if a query has _any_ implicit
range table entries -- in the past, we would only warn about implicit
RTEs in SELECTs with at least one explicit RTE.
As a result of the warning change, 25 of the regression tests had to
be updated. I also took the opportunity to remove some bogus whitespace
differences between some of the float4 and float8 variants. I believe
I have correctly updated all the platform-specific variants, but let
me know if that's not the case.
Original patch for DELETE ... USING from Euler Taveira de Oliveira,
reworked by Neil Conway.
few palloc's. I also chose to eliminate the restype and restypmod fields
entirely, since they are redundant with information stored in the node's
contained expression; re-examining the expression at need seems simpler
and more reliable than trying to keep restype/restypmod up to date.
initdb forced due to change in contents of stored rules.
implement any new feature, it just pushes the 'not implemented' error
message deeper into the backend. I also tweaked the grammar to accept
Oracle-ish parameter syntax (parameter name first), as well as the
SQL99 standard syntax (parameter mode first), since it was easy and
people will doubtless try to use both anyway.
whether or not it is a security definer. Changing a function's strictness
is required by SQL2003, and the other capabilities make sense. Also, allow
an optional RESTRICT noise word to be specified, for SQL conformance.
Some trivial regression tests added and the documentation has been
updated.
Formerly, if such a clause contained no aggregate functions we mistakenly
treated it as equivalent to WHERE. Per spec it must cause the query to
be treated as a grouped query of a single group, the same as appearance
of aggregate functions would do. Also, the HAVING filter must execute
after aggregate function computation even if it itself contains no
aggregate functions.
command. This is useful because we can allow truncation of tables
referenced by foreign keys, so long as the referencing table is
truncated in the same command.
Alvaro Herrera
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
of an inheritance child table is binary-compatible with the rowtype of
its parent, invent an expression node type that does the conversion
correctly. Fixes the new bug exhibited by Kris Shannon as well as a
lot of old bugs that would only show up when using multiple inheritance
or after altering the parent table.
clause implicitly whenever one is not given explicitly. Remove concept
of a schema having an associated tablespace, and simplify the rules for
selecting a default tablespace for a table or index. It's now just
(a) explicit TABLESPACE clause; (b) default_tablespace if that's not an
empty string; (c) database's default. This will allow pg_dump to use
SET commands instead of tablespace clauses to determine object locations
(but I didn't actually make it do so). All per recent discussions.
live in database or schema's default tablespace, as per today's discussion.
Also, remove some unused keywords from the grammar (PATH, PENDANT,
VERSION), and fix ALSO, which was added as a keyword but not added
to the keyword classification lists, thus making it worse-than-reserved.
aggregates, conversions, functions, operators, operator classes,
schemas, types, and tablespaces. Fold the existing implementations
of alter domain owner and alter database owner in with these.
Christopher Kings-Lynne
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
As a side effect, cause subscripts in INSERT targetlists to do something
more or less sensible; previously we evaluated such subscripts and then
effectively ignored them. Another side effect is that UPDATE-ing an
element or slice of an array value that is NULL now produces a non-null
result, namely an array containing just the assigned-to positions.
It was necessary to touch in grammar and create a new node to make home
to the new syntax. The command is also supported in E
CPG. Doc updates are attached too. Only superusers can change the owner
of the database. New owners don't need any aditional
privileges.
Euler Taveira de Oliveira
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
rather than allowing them only in a few special cases as before. In
particular you can now pass a ROW() construct to a function that accepts
a rowtype parameter. Internal generation of RowExprs fixes a number of
corner cases that used to not work very well, such as referencing the
whole-row result of a JOIN or subquery. This represents a further step in
the work I started a month or so back to make rowtype values into
first-class citizens.
* ALTER ... ADD COLUMN with defaults and NOT NULL constraints works per SQL
spec. A default is implemented by rewriting the table with the new value
stored in each row.
* ALTER COLUMN TYPE. You can change a column's datatype to anything you
want, so long as you can specify how to convert the old value. Rewrites
the table. (Possible future improvement: optimize no-op conversions such
as varchar(N) to varchar(N+1).)
* Multiple ALTER actions in a single ALTER TABLE command. You can perform
any number of column additions, type changes, and constraint additions with
only one pass over the table contents.
Basic documentation provided in ALTER TABLE ref page, but some more docs
work is needed.
Original patch from Rod Taylor, additional work from Tom Lane.
so that the 'val' is computed only once, per recent discussion. The
speedup is not much when 'val' is just a simple variable, but could be
significant for larger expressions. More importantly this avoids issues
with multiple evaluations of a volatile 'val', and it allows the CASE
expression to be reverse-listed in its original form by ruleutils.c.
for sure...). Rather than relying on the query context of a rangetable
entry to identify what permissions it wants checked, store a full AclMode
mask in each RTE, and check exactly those bits. This allows an RTE
specifying, say, INSERT privilege on a view to be copied into a derived
UPDATE query without changing meaning. Per recent discussion thread.
initdb forced due to change of stored rule representation.
intended to allow application authors to insulate themselves from
changes to the default value of 'default_with_oids' in future releases
of PostgreSQL.
This patch also fixes a bug in the earlier implementation of the
'default_with_oids' GUC variable: code in gram.y should not examine
the value of GUC variables directly due to synchronization issues.
parameters to be declared with names. pg_proc has a column to store
names, and CREATE FUNCTION can insert data into it, but that's all as
yet. I need to do more work on the pg_dump and plpgsql portions of the
patch before committing those, but I thought I'd get the bulky changes
in before the tree drifts under me.
initdb forced due to pg_proc change.
join conditions in which each OR subclause includes a constraint on
the same relation. This implements the other useful side-effect of
conversion to CNF format, without its unpleasant side-effects. As
per pghackers discussion of a few weeks ago.
fields: now they are valid whenever the clause is a binary opclause,
not only when it is a potential join clause (there is a new boolean
field canjoin to signal the latter condition). This lets us avoid
recomputing the relid sets over and over while examining indexes.
Still more work to do to make this as useful as it could be, because
there are places that could use the info but don't have access to the
RestrictInfo node.
be anything yielding an array of the proper kind, not only sub-ARRAY[]
constructs; do subscript checking at runtime not parse time. Also,
adjust array_cat to make array || array comply with the SQL99 spec.
Joe Conway
datatype by array_eq and array_cmp; use this to solve problems with memory
leaks in array indexing support. The parser's equality_oper and ordering_oper
routines also use the cache. Change the operator search algorithms to look
for appropriate btree or hash index opclasses, instead of assuming operators
named '<' or '=' have the right semantics. (ORDER BY ASC/DESC now also look
at opclasses, instead of assuming '<' and '>' are the right things.) Add
several more index opclasses so that there is no regression in functionality
for base datatypes. initdb forced due to catalog additions.
'scalar op ALL (array)', where the operator is applied between the
lefthand scalar and each element of the array. The operator must
yield boolean; the result of the construct is the OR or AND of the
per-element results, respectively.
Original coding by Joe Conway, after an idea of Peter's. Rewritten
by Tom to keep the implementation strictly separate from subqueries.
- LIKE <subtable> [ INCLUDING DEFAULTS | EXCLUDING DEFAULTS ]
- Quick cleanup of analyze.c function prototypes.
- New non-reserved keywords (INCLUDING, EXCLUDING, DEFAULTS), SQL 200X
Opted not to extend for check constraints at this time.
As per the definition that it's user defined columns, OIDs are NOT
inherited.
Doc and Source patches attached.
--
Rod Taylor <rbt@rbt.ca>
extensions to support our historical behavior. An aggregate belongs
to the closest query level of any of the variables in its argument,
or the current query level if there are no variables (e.g., COUNT(*)).
The implementation involves adding an agglevelsup field to Aggref,
and treating outer aggregates like outer variables at planning time.
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
expressions, ARRAY(sub-SELECT) expressions, some array functions.
Polymorphic functions using ANYARRAY/ANYELEMENT argument and return
types. Some regression tests in place, documentation is lacking.
Joe Conway, with some kibitzing from Tom Lane.
Add ALTER SEQUENCE to modify min/max/increment/cache/cycle values
Also updated create sequence docs to mention NO MINVALUE, & NO MAXVALUE.
New Files:
doc/src/sgml/ref/alter_sequence.sgml
src/test/regress/expected/sequence.out
src/test/regress/sql/sequence.sql
ALTER SEQUENCE is NOT transactional. It behaves similarly to setval().
It matches the proposed SQL200N spec, as well as Oracle in most ways --
Oracle lacks RESTART WITH for some strange reason.
--
Rod Taylor <rbt@rbt.ca>
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
codes, per discussion from last March. parse.h should now be included
*only* by gram.y, scan.l, keywords.c, parser.c. This prevents surprising
misbehavior after seemingly-trivial grammar adjustments.
rid of the assumption that sizeof(Oid)==sizeof(int). This is one small
step towards someday supporting 8-byte OIDs. For the moment, it doesn't
do much except get rid of a lot of unsightly casts.
startup, not in the parser; this allows ALTER DOMAIN to work correctly
with domain constraint operations stored in rules. Rod Taylor;
code review by Tom Lane.
There are two implementation techniques: the executor understands a new
JOIN_IN jointype, which emits at most one matching row per left-hand row,
or the result of the IN's sub-select can be fed through a DISTINCT filter
and then joined as an ordinary relation.
Along the way, some minor code cleanup in the optimizer; notably, break
out most of the jointree-rearrangement preprocessing in planner.c and
put it in a new file prep/prepjointree.c.
containing a volatile function), rather than only on 'Var = Var' clauses
as before. This makes it practical to do flatten_join_alias_vars at the
start of planning, which in turn eliminates a bunch of klugery inside the
planner to deal with alias vars. As a free side effect, we now detect
implied equality of non-Var expressions; for example in
SELECT ... WHERE a.x = b.y and b.y = 42
we will deduce a.x = 42 and use that as a restriction qual on a. Also,
we can remove the restriction introduced 12/5/02 to prevent pullup of
subqueries whose targetlists contain sublinks.
Still TODO: make statistical estimation routines in selfuncs.c and costsize.c
smarter about expressions that are more complex than plain Vars. The need
for this is considerably greater now that we have to be able to estimate
the suitability of merge and hash join techniques on such expressions.
Simplify SubLink by storing just a List of operator OIDs, instead of
a list of incomplete OpExprs --- that was a bizarre and bulky choice,
with no redeeming social value since we have to build new OpExprs
anyway when forming the plan tree.
'NOT (x IN (subselect))', that is 'NOT (x = ANY (subselect))',
rather than 'x <> ALL (subselect)' as we formerly did. This
opens the door to optimizing NOT IN the same way as IN, whereas
there's no hope of optimizing the expression using <>. Also,
convert 'x <> ALL (subselect)' to the NOT(IN) style, so that
the optimization will be available when processing rules dumped
by older Postgres versions.
initdb forced due to small change in SubLink node representation.
in the planned representation of a subplan at all any more, only SubPlan.
This means subselect.c doesn't scribble on its input anymore, which seems
like a good thing; and there are no longer three different possible
interpretations of a SubLink. Simplify node naming and improve comments
in primnodes.h. No change to stored rules, though.
make VALUE a non-reserved word again, use less invasive method of passing
ConstraintTestValue into transformExpr, fix problems with nested constraint
testing, do correct thing with NULL result from a constraint expression,
remove memory leak. Domain checks still need much more work if we are going
to allow ALTER DOMAIN, however.
so that all executable expression nodes inherit from a common supertype
Expr. This is somewhat of an exercise in code purity rather than any
real functional advance, but getting rid of the extra Oper or Func node
formerly used in each operator or function call should provide at least
a little space and speed improvement.
initdb forced by changes in stored-rules representation.
to plan nodes, not vice-versa. All executor state nodes now inherit from
struct PlanState. Copying of plan trees has been simplified by not
storing a list of SubPlans in Plan nodes (eliminating duplicate links).
The executor still needs such a list, but it can build it during
ExecutorStart since it has to scan the plan tree anyway.
No initdb forced since no stored-on-disk structures changed, but you
will need a full recompile because of node-numbering changes.