CREATE AGGREGATE aggname (input_type) (parameter_list)
along with the old syntax where the input type was named in the parameter
list. This fits more naturally with the way that the aggregate is identified
in DROP AGGREGATE and other utility commands; furthermore it has a natural
extension to handle multiple-input aggregates, where the basetype-parameter
method would get ugly. In fact, this commit fixes the grammar and all the
utility commands to support multiple-input aggregates; but DefineAggregate
rejects it because the executor isn't fixed yet.
I didn't do anything about treating agg(*) as a zero-input aggregate instead
of artificially making it a one-input aggregate, but that should be considered
in combination with supporting multi-input aggregates.
that apply the necessary domain constraint checks immediately. This fixes
cases where domain constraints went unchecked for statement parameters,
PL function local variables and results, etc. We can also eliminate existing
special cases for domains in places that had gotten it right, eg COPY.
Also, allow domains over domains (base of a domain is another domain type).
This almost worked before, but was disallowed because the original patch
hadn't gotten it quite right.
functions are not strict, they will be called (passing a NULL first parameter)
during any attempt to input a NULL value of their datatype. Currently, all
our input functions are strict and so this commit does not change any
behavior. However, this will make it possible to build domain input functions
that centralize checking of domain constraints, thereby closing numerous holes
in our domain support, as per previous discussion.
While at it, I took the opportunity to introduce convenience functions
InputFunctionCall, OutputFunctionCall, etc to use in code that calls I/O
functions. This eliminates a lot of grotty-looking casts, but the main
motivation is to make it easier to grep for these places if we ever need
to touch them again.
The original coding stored the raw parser output (ColumnDef and TypeName
nodes) which was ugly, bulky, and wrong because it failed to create any
dependency on the referenced datatype --- and in fact would not track type
renamings and suchlike. Instead store a list of column type OIDs in the
RTE.
Also fix up general failure of recordDependencyOnExpr to do anything sane
about recording dependencies on datatypes. While there are many cases where
there will be an indirect dependency (eg if an operator returns a datatype,
the dependency on the operator is enough), we do have to record the datatype
as a separate dependency in examples like CoerceToDomain.
initdb forced because of change of stored rules.
during parse analysis, not only errors detected in the flex/bison stages.
This is per my earlier proposal. This commit includes all the basic
infrastructure, but locations are only tracked and reported for errors
involving column references, function calls, and operators. More could
be done later but this seems like a good set to start with. I've also
moved the ReportSyntaxErrorPosition logic out of psql and into libpq,
which should make it available to more people --- even within psql this
is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
not likely ever to be implemented seeing it's been removed from SQL2003.
This allows getting rid of the 'filter' version of yylex() that we had in
parser.c, which should save at least a few microseconds in parsing.
columns of the grouping clause to avoid redundant sorts. The optimizer
is not currently capable of doing this, so this patch implements a
simple hack in the analysis phase (transformGroupClause): if any
subset of the GROUP BY clause matches a prefix of the ORDER BY list,
that prefix is moved to the front of the GROUP BY clause. This
shouldn't change the semantics of the query, and allows a redundant
sort to be avoided for queries like "GROUP BY a, b ORDER BY b".
creation of a shell type. This allows a less hacky way of dealing with
the mutual dependency between a datatype and its I/O functions: make a
shell type, then make the functions, then define the datatype fully.
We should fix pg_dump to handle things this way, but this commit just deals
with the backend.
Martijn van Oosterhout, with some corrections by Tom Lane.
comments on cluster global objects like databases, tablespaces, and
roles.
It touches a lot of places, but not much in the way of big changes. The
only design decision I made was to duplicate the query and manipulation
functions rather than to try and have them handle both shared and local
comments. I believe this is simpler for the code and not an issue for
callers because they know what type of object they are dealing with.
This has resulted in a shobj_description function analagous to
obj_description and backend functions [Create/Delete]SharedComments
mirroring the existing [Create/Delete]Comments functions.
pg_shdescription.h goes into src/include/catalog/
Kris Jurka
and DELETE. If specified, the alias must be used instead of the full
table name. Also, the alias currently cannot be used in the SET clause
of UPDATE.
Patch from Atsushi Ogawa, various editorialization by Neil Conway.
Along the way, make the rowtypes regression test pass if add_missing_from
is enabled, and add a new (skeletal) regression test for DELETE.
Continue to support GRANT ON [TABLE] for sequences for backward
compatibility; issue warning for invalid sequence permissions.
[Backward compatibility warning message.]
Add USAGE permission for sequences that allows only currval() and
nextval(), not setval().
Mention object name in grant/revoke warnings because of possible
multi-object operations.
data type is unspecified or is declared to be "unknown", the type will
be inferred from the context in which the parameter is used. This was
already possible for protocol-level prepared statements.
(previously we only did = and <> correctly). Also, allow row comparisons
with any operators that are in btree opclasses, not only those with these
specific names. This gets rid of a whole lot of indefensible assumptions
about the behavior of particular operators based on their names ... though
it's still true that IN and NOT IN expand to "= ANY". The patch adds a
RowCompareExpr expression node type, and makes some changes in the
representation of ANY/ALL/ROWCOMPARE SubLinks so that they can share code
with RowCompareExpr.
I have not yet done anything about making RowCompareExpr an indexable
operator, but will look at that soon.
initdb forced due to changes in stored rules.
#define HIGHBIT (0x80)
#define IS_HIGHBIT_SET(ch) ((unsigned char)(ch) & HIGHBIT)
and removed CSIGNBIT and mapped it uses to HIGHBIT. I have also added
uses for IS_HIGHBIT_SET where appropriate. This change is
purely for code clarity.
ScalarArrayOpExpr when possible, that is, whenever there is an array type
for the values of the expression list. This completes the project I've
been working on to improve the speed of index searches with long IN lists,
as per discussion back in mid-October.
I did not force initdb, but until you do one you will see failures in the
"rules" regression test, because some of the standard system views use IN
and their compiled formats have changed.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
process of dropping roles by dropping objects owned by them and privileges
granted to them, or giving the owned objects to someone else, through the
use of the data stored in the new pg_shdepend catalog.
Some refactoring of the GRANT/REVOKE code was needed, as well as ALTER OWNER
code. Further cleanup of code duplication in the GRANT code seems necessary.
Implemented by me after an idea from Tom Lane, who also provided various kind
of implementation advice.
Regression tests pass. Some tests for the new functionality are also added,
as well as rudimentary documentation.
recursed twice on its first argument, leading to exponential time spent
on a deep nest of COALESCEs ... such as a deeply nested FULL JOIN would
produce. Per report from Matt Carter.
surprising results when it's some other numeric type. This doesn't solve
the generic problem of surprising implicit casts to text, but it's a
low-impact way of making sure this particular case behaves sanely.
Per gripe from Harald Fuchs and subsequent discussion.
inFromCl true, meaning that they will list out as explicit RTEs if they
are in a view or rule. Update comments about inFromCl to reflect the way
it's now actually used. Per recent discussion.
the parameter's name (if any) as the default column name for SELECT FROM
the function, rather than the function name as previously. I still think
this is a bad idea, but I lost the argument. Force decompilation of
function RTEs to specify full aliases always, to reduce the odds of this
decision breaking dumped views.
argument as a 'regclass' value instead of a text string. The frontend
conversion of text string to pg_class OID is now encapsulated as an
implicitly-invocable coercion from text to regclass. This provides
backwards compatibility to the old behavior when the sequence argument
is explicitly typed as 'text'. When the argument is just an unadorned
literal string, it will be taken as 'regclass', which means that the
stored representation will be an OID. This solves longstanding problems
with renaming sequences that are referenced in default expressions, as
well as new-in-8.1 problems with renaming such sequences' schemas or
moving them to another schema. All per recent discussion.
Along the way, fix some rather serious problems in dbmirror's support
for mirroring sequence operations (int4 vs int8 confusion for instance).
as per my recent proposal. For now the template data is hard-wired in
proclang.c --- this should be replaced later by a new shared system
catalog, but we don't want to force initdb during 8.1 beta. This change
lets us cleanly load existing dump files even if they contain outright
wrong information about a PL's support functions, such as a wrong path
to the shared library or a missing validator function. Also, we can
revert the recent kluges to make pg_dump dump PL support functions that
are stored in pg_catalog.
While at it, I removed the code in pg_regress that replaced $libdir
with a hardcoded path for temporary installations. This is no longer
needed given our support for relocatable installations.
use these instead of its previous hack of changing pg_class.reltriggers.
Documentation is lacking, will add that later.
Patch by Satoshi Nagayasu, review and some extra work by Tom Lane.
doesn't automatically inherit the privileges of roles it is a member of;
for such a role, membership in another role can be exploited only by doing
explicit SET ROLE. The default inherit setting is TRUE, so by default
the behavior doesn't change, but creating a user with NOINHERIT gives closer
adherence to our current reading of SQL99. Documentation still lacking,
and I think the information schema needs another look.
role memberships; make superuser/createrole distinction do something
useful; fix some locking and CommandCounterIncrement issues; prevent
creation of loops in the membership graph.
syntactic conflicts, both privilege and role GRANT/REVOKE commands have
to use the same production for scanning the list of tokens that might
eventually turn out to be privileges or role names. So, change the
existing GRANT/REVOKE code to expect a list of strings not pre-reduced
AclMode values. Fix a couple other minor issues while at it, such as
InitializeAcl function name conflicting with a Windows system function.
and pg_auth_members. There are still many loose ends to finish in this
patch (no documentation, no regression tests, no pg_dump support for
instance). But I'm going to commit it now anyway so that Alvaro can
make some progress on shared dependencies. The catalog changes should
be pretty much done.
with main, avoid using a SQL-defined SQLSTATE for what is most definitely
not a SQL-compatible error condition, fix documentation omissions,
adhere to message style guidelines, don't use two GUC_REPORT variables
when one is sufficient. Nothing done about pg_dump issues.
literally.
Add GUC variables:
"escape_string_warning" - warn about backslashes in non-E strings
"escape_string_syntax" - supports E'' syntax?
"standard_compliant_strings" - treats backslashes literally in ''
Update code to use E'' when escapes are used.
CURRENT_TIME, and LOCALTIME: now they just produce "timestamptz" not
"timestamptz(6)", etc. This makes the behavior more consistent with our
choice to not assign a specific default precision to column datatypes.
It should also save a few cycles at runtime due to not having to invoke
the round-to-given-precision functions.
I also took the opportunity to translate CURRENT_TIMESTAMP into "now()"
instead of an invocation of the timestamptz input converter --- this should
save a few cycles too.
in the database. The old behavior (reindex system catalogs only) is now
available as REINDEX SYSTEM. I did not add the complementary REINDEX USER
case since there did not seem to be consensus for this, but it would be
trivial to add later. Per recent discussions.
argument list contains parameter symbols ($n) declared as type VOID,
discard these arguments. This allows the driver to avoid renumbering
mixed IN and OUT argument placeholders (the JDBC syntax involves writing
? for both IN and OUT parameters, but on the server side we don't think
that OUT parameters are arguments). This doesn't break any currently-
useful cases since VOID is not used as an input argument type.
as well as the existing pg_catalog entries for prefix and postfix %.
These have never been documented, though they did appear in one old
regression test. This avoids surprising behavior in cases like
"SELECT -25 % -10". Per recent discussion.
Note: although there is a catalog change here, I did not force initdb
since there's no harm in leaving the inaccessible entries in one's
copy of pg_operator.
a new PlannerInfo struct, which is passed around instead of the bare
Query in all the planning code. This commit is essentially just a
code-beautification exercise, but it does open the door to making
larger changes to the planner data structures without having to muck
with the widely-known Query struct.
representation as the jointree) with two lists of RTEs, one showing
the RTEs accessible by qualified names, and the other showing the RTEs
accessible by unqualified names. I think this is conceptually simpler
than what we did before, and it's sure a whole lot easier to search.
This seems to eliminate the parse-time bottleneck for deeply nested
JOIN structures that was exhibited by phil@vodafone.
RTE of interest, rather than the whole rangetable list. This makes
the API more understandable and avoids duplicate RTE lookups. This
patch reverts no-longer-needed portions of my patch of 2004-08-19.
performance problem pointed out by phil@vodafone: to wit, we were
spending O(N^2) time to check dropped-ness in an N-deep join tree,
even in the case where the tree was freshly constructed and couldn't
possibly mention any dropped columns. Instead of recursing in
get_rte_attribute_is_dropped(), change the data structure definition:
the joinaliasvars list of a JOIN RTE must have a NULL Const instead
of a Var at any position that references a now-dropped column. This
costs nothing during normal parse-rewrite-plan path, and instead we
have a linear-time update to make when loading a stored rule that
might contain now-dropped columns. While at it, move the responsibility
for acquring locks on relations referenced by rules into this separate
function (which I therefore chose to call AcquireRewriteLocks).
This saves effort --- namely, duplicated lock grabs in parser and rewriter
--- in the normal path at a cost of one extra non-locked heap_open()
in the stored-rule path; seems a good tradeoff. A fringe benefit is
that it is now *much* clearer that we acquire lock on relations referenced
in rules before we make any rewriter decisions based on their properties.
(I don't know of any bug of that ilk, but it wasn't exactly clear before.)
were pretty expensive and I believe the case they were put in to
defend against can no longer arise, now that we have dependency checks
to prevent deletion of a type entry that is still referenced. Certainly
the example given in the CVS log entry can't happen anymore.
Since this was the only use of typeidIsValid(), remove the routine too.
to columns of an RTE that was a function returning RECORD with a column
definition list. Apparently no one has tried to use non-default typmod
with a function returning RECORD before.
scanner anyway) to avoid having any backup states. According to the
flex manual, this should speed things up, and indeed the backend scanner
is about a third faster according to some quick profiling checks.
I haven't tried to measure the speed change in psql, but it probably
is similar.
if they are two-byte multibyte characters. Same thing can be happen
if octet_length(multibyte_chars) == n where n is char(n).
Long standing bug since 7.3 days. Per report and fix from Yoshiyuki Asaba.
moment this has no particular use except to allow table rows to be
passed to record_out(), but that case seems to be useful in itself
per recent example from Elein. Further down the road we could look
at letting PL functions be declared to accept RECORD parameters.
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
As I pointed out a few days ago, this code has failed to do anything useful
for some time ... and if we did want to revive the capability to select
functions by nearness of inheritance ancestry, this is the wrong place
and way to do it anyway. The knowledge would need to go into
func_select_candidate() instead. Perhaps someday someone will be motivated
to do that, but I am not today.
c_expr. Perhaps the restriction was once needed to avoid bison errors,
but it seems to work just fine now --- and even generates a slightly
smaller state machine. This change allows examples like
SELECT '13:45'::timetz AT TIME ZONE '-07:00'::interval;
to work without parentheses around the right-hand input.
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
of just a relation OID, thereby not having to open the relation for itself.
This actually saves code rather than adding it for most of the existing
callers, which had the rel open already. The main point though is to be
able to use this rather than plain addRangeTableEntry in setTargetTable,
thus saving one relation_openrv/relation_close cycle for every INSERT,
UPDATE, or DELETE. Seems to provide a several percent win on simple
INSERTs.
in UPDATE. We also now issue a NOTICE if a query has _any_ implicit
range table entries -- in the past, we would only warn about implicit
RTEs in SELECTs with at least one explicit RTE.
As a result of the warning change, 25 of the regression tests had to
be updated. I also took the opportunity to remove some bogus whitespace
differences between some of the float4 and float8 variants. I believe
I have correctly updated all the platform-specific variants, but let
me know if that's not the case.
Original patch for DELETE ... USING from Euler Taveira de Oliveira,
reworked by Neil Conway.
few palloc's. I also chose to eliminate the restype and restypmod fields
entirely, since they are redundant with information stored in the node's
contained expression; re-examining the expression at need seems simpler
and more reliable than trying to keep restype/restypmod up to date.
initdb forced due to change in contents of stored rules.
implement any new feature, it just pushes the 'not implemented' error
message deeper into the backend. I also tweaked the grammar to accept
Oracle-ish parameter syntax (parameter name first), as well as the
SQL99 standard syntax (parameter mode first), since it was easy and
people will doubtless try to use both anyway.
change saves a great deal of space in pg_proc and its primary index,
and it eliminates the former requirement that INDEX_MAX_KEYS and
FUNC_MAX_ARGS have the same value. INDEX_MAX_KEYS is still embedded
in the on-disk representation (because it affects index tuple header
size), but FUNC_MAX_ARGS is not. I believe it would now be possible
to increase FUNC_MAX_ARGS at little cost, but haven't experimented yet.
There are still a lot of vestigial references to FUNC_MAX_ARGS, which
I will clean up in a separate pass. However, getting rid of it
altogether would require changing the FunctionCallInfoData struct,
and I'm not sure I want to buy into that.
whether or not it is a security definer. Changing a function's strictness
is required by SQL2003, and the other capabilities make sense. Also, allow
an optional RESTRICT noise word to be specified, for SQL conformance.
Some trivial regression tests added and the documentation has been
updated.
Document use of macros for pg_printf functions.
Bump major versions of all interfaces to handle movement of get_progname
from libpq to libpgport in 8.0, and probably other libpgport changes in 8.1.
Formerly, if such a clause contained no aggregate functions we mistakenly
treated it as equivalent to WHERE. Per spec it must cause the query to
be treated as a grouped query of a single group, the same as appearance
of aggregate functions would do. Also, the HAVING filter must execute
after aggregate function computation even if it itself contains no
aggregate functions.
tests. Contributed by Koju Iijima, review from Neil Conway, Gavin Sherry
and Tom Lane.
Also, fix error in description of WITH CHECK OPTION clause in the CREATE
VIEW reference page: it should be "CASCADED", not "CASCADE".
command. This is useful because we can allow truncation of tables
referenced by foreign keys, so long as the referencing table is
truncated in the same command.
Alvaro Herrera
got it wrong when the JOIN was in an outer query level. Per example from
Laurie Burrow. Also fix same issue in markTargetListOrigin. I think the
latter is only a latent bug since we currently don't apply markTargetListOrigin
except at the outer level ... but should do it right anyway.
CASE 'a' WHEN 'a' THEN 1 ELSE 2 END. This worked in 7.4 and before
but had been broken due to premature freezing of the type of the test
expression. Per gripe from GÄbor SzÃcs.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
silently ignored, allowing one to write bizarre things like
DECLARE x setof int;
in plpgsql. This has misled at least one novice into thinking that
plpgsql variables could be sets ...
of an inheritance child table is binary-compatible with the rowtype of
its parent, invent an expression node type that does the conversion
correctly. Fixes the new bug exhibited by Kris Shannon as well as a
lot of old bugs that would only show up when using multiple inheritance
or after altering the parent table.
more than 65K columns, or when the created table has more than 65K columns
due to adding inherited columns from parent relations. Fix a similar
crash when processing SELECT queries with more than 65K target list
entries. In all three cases we would eventually detect the error and
elog, but the check was being made too late.
working as intended --- for some reason, FROM a.b.c was getting
parsed as if it were a function name and not a qualified name.
I think there must be a bug in bison, because it should have
complained that the grammar was ambiguous. Anyway, fix it along
the same lines previously used for func_name vs columnref, and get
rid of the right-recursion in attrs that seems to have confused
bison.
type-and-length coercion function, make sure that the coercion function
is told the correct typmod. Fixes Kris Jurka's example of a domain
over bit(N).
clause implicitly whenever one is not given explicitly. Remove concept
of a schema having an associated tablespace, and simplify the rules for
selecting a default tablespace for a table or index. It's now just
(a) explicit TABLESPACE clause; (b) default_tablespace if that's not an
empty string; (c) database's default. This will allow pg_dump to use
SET commands instead of tablespace clauses to determine object locations
(but I didn't actually make it do so). All per recent discussions.
to make life cushy for the JDBC driver. Centralize the decision-making
that affects this by inventing a get_type_func_class() function, rather
than adding special cases in half a dozen places.
to unreserved keyword, use ereport not elog, assign a separate error code
for 'could not obtain lock' so that applications will be able to detect
that case cleanly.
a separate production func_expr. This allows us to accept all these
variants in the backwards-compatible syntax for creating a functional
index; which beats documenting exactly which things work and which don't.
Interestingly, it also seems to make the generated state machine a little
bit smaller.
(1) Replace while loop with the new forboth() construct in
parser/analyze.c
(2) Replace lcons() with lappend() in SearchCatCacheList(). Since these
now have the same performance, there is no reason to prefer lcons() in
this case, and using lappend() leads to cleaner code.
(3) Improve the name of the second parameter to for_each_cell()
ColLabel instead of just ColId --- that is, any keyword can appear after
a dot and it will be taken as an identifier. Fixes problems with names
that are okay as standalone function names but fail when qualified.
presence of dropped columns. Document the already-presumed fact that
eref aliases in relation RTEs are supposed to have entries for dropped
columns; cause the user alias structs to have such entries too, so that
there's always a one-to-one mapping to the underlying physical attnums.
Adjust expandRTE() and related code to handle the case where a column
that is part of a JOIN has been dropped. Generalize expandRTE()'s API
so that it can be used in a couple of places that formerly rolled their
own implementation of the same logic. Fix ruleutils.c to suppress
display of aliases for columns that were dropped since the rule was made.
to the physical layout of the rowtype, ie, there are dummy arguments
corresponding to any dropped columns in the rowtype. We formerly had a
couple of places that did it this way and several others that did not.
Fixes Gaetano Mendola's "cache lookup failed for type 0" bug of 5-Aug.
by the SQL standard. For backwards compatibility, however, continue to
accept the syntax without. Minor editorialization in the reference pages
for these commands, too.
SAVEPOINT/RELEASE/ROLLBACK-TO syntax. (Alvaro)
Cause COMMIT of a failed transaction to report ROLLBACK instead of
COMMIT in its command tag. (Tom)
Fix a few loose ends in the nested-transactions stuff.
live in database or schema's default tablespace, as per today's discussion.
Also, remove some unused keywords from the grammar (PATH, PENDANT,
VERSION), and fix ALSO, which was added as a keyword but not added
to the keyword classification lists, thus making it worse-than-reserved.
only because 14627 still contained the same node that BitWithoutLength had
just produced. Make it more transparent. Also adjust ConstCharacter
to be coded the same way for consistency.
aggregates, conversions, functions, operators, operator classes,
schemas, types, and tablespaces. Fold the existing implementations
of alter domain owner and alter database owner in with these.
Christopher Kings-Lynne
should recognize 'foo.*' when the star appears in A_Indirection, not only
in ColumnRef. This allows 'SELECT something.*' to do what the user
expects when the something is an expression yielding a row.
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
eliminating the former hard-wired convention about their names. Allow
pg_cast entries to represent both type coercion and length coercion in
a single step --- this is represented by a function that takes an
extra typmod argument, just like a length coercion function. This
nicely merges the type and length coercion mechanisms into something
at least a little cleaner than we had before. Make use of the single-
coercion-step behavior to fix integer-to-bit coercion so that coercing
to bit(n) yields the rightmost n bits of the integer instead of the
leftmost n bits. This should fix recurrent complaints about the odd
behavior of this coercion. Clean up the documentation of the bit string
functions, and try to put it where people might actually find it.
Also, get rid of the unreliable heuristics in ruleutils.c about whether
to display nested coercion steps; instead require parse_coerce.c to
label them properly in the first place.
sequences, as per recent discussion. All these names are now of the
form table_column_type, with digits added if needed to make them unique.
Default constraint names are chosen to be unique across their whole schema,
not just within the parent object, so as to be more SQL-spec-compatible
and make the information schema views more useful.
As a side effect, cause subscripts in INSERT targetlists to do something
more or less sensible; previously we evaluated such subscripts and then
effectively ignored them. Another side effect is that UPDATE-ing an
element or slice of an array value that is NULL now produces a non-null
result, namely an array containing just the assigned-to positions.
of a composite type to get that type's OID as their second parameter,
in place of typelem which is useless. The actual changes are mostly
centralized in getTypeInputInfo and siblings, but I had to fix a few
places that were fetching pg_type.typelem for themselves instead of
using the lsyscache.c routines. Also, I renamed all the related variables
from 'typelem' to 'typioparam' to discourage people from assuming that
they necessarily contain array element types.
when someone attempts to create a column of a composite datatype. For
now, just make sure we produce a reasonable error at the 'right place'.
Not sure if this will be made to work before 7.5, but make it act
reasonably in case nothing more gets done.
extend the GUC variable set".
Plugin modules like the pl<lang> modules needs a way to declare
configuration parameters. The postmaster has no knowledge of such
modules when it reads the postgresql.conf file. Rather than allowing
totally unknown configuration parameters, the concept of a variable
"class" is introduced. Variables that belongs to a declared classes will
create a placeholder value of string type and will not generate an
error. When a module is loaded, it will declare variables for such a
class and make those variables "consume" any placeholders that has been
defined. Finally, the module will generate warnings for unrecognized
placeholders defined for its class.
More detail:
The design is outlined after the suggestions made by Tom Lane and Joe
Conway in this thread:
http://archives.postgresql.org/pgsql-hackers/2004-02/msg00229.php
A new string variable 'custom_variable_classes' is introduced. This
variable is a comma separated string of identifiers. Each identifier
denots a 'class' that will allow its members to be added without error.
This variable must be defined in postmaster.conf.
The lexer (guc_file.l) is changed so that it can accept a qualified name
in the form <ID>.<ID> as the name of a variable. I also changed so that
the 'custom_variable_classes', if found, is added first of all variables
in order to remove the order of declaration issue.
The guc_variables table is made more dynamic. It is originally created
with 20% slack and can grow dynamically. A capacity is introduced to
avoid resizing every time a new variable is added. guc_variables and
num_guc_variables becomes static (hidden).
The GucInfoMain now uses the new function get_guc_variables() and
GetNumConfigOptions instead or using the guc_variables directly.
The find_option() function, when passed a missing name, will check if
the name is qualified. If the name is qualified and if the qualifier
denotes a class included in the 'custom_variable_classes', a placeholder
variable will be created. Such a placeholder will not participate in a
list operation but will otherwise function as a normal string variable.
Define<type>GucVariable() functions will be added, one for each variable
type. They are inteded to be used by add-on modules like the pl<lang>
mappings. Example:
extern void DefineCustomBoolVariable(
const char* name,
const char* short_desc,
const char* long_desc,
bool* valueAddr,
GucContext context,
GucBoolAssignHook assign_hook,
GucShowHook show_hook);
(I created typedefs for the assign-hook and show-hook functions). A call
to these functions will define a new GUC-variable. If a placeholder
exists it will be replaced but it's value will be used in place of the
default value. The valueAddr is assumed ot point at a default value when
the define function is called. The only constraint that is imposed on a
Custom variable is that its name is qualified.
Finally, a function:
void EmittWarningsOnPlacholders(const char* className)
was added. This function should be called when a module has completed
its variable definitions. At that time, no placeholders should remain
for the class that the module uses. If they do, elog(INFO, ...) messages
will be issued to inform the user that unrecognized variables are
present.
Thomas Hallgren
It was necessary to touch in grammar and create a new node to make home
to the new syntax. The command is also supported in E
CPG. Doc updates are attached too. Only superusers can change the owner
of the database. New owners don't need any aditional
privileges.
Euler Taveira de Oliveira
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
rather than allowing them only in a few special cases as before. In
particular you can now pass a ROW() construct to a function that accepts
a rowtype parameter. Internal generation of RowExprs fixes a number of
corner cases that used to not work very well, such as referencing the
whole-row result of a JOIN or subquery. This represents a further step in
the work I started a month or so back to make rowtype values into
first-class citizens.
* ALTER ... ADD COLUMN with defaults and NOT NULL constraints works per SQL
spec. A default is implemented by rewriting the table with the new value
stored in each row.
* ALTER COLUMN TYPE. You can change a column's datatype to anything you
want, so long as you can specify how to convert the old value. Rewrites
the table. (Possible future improvement: optimize no-op conversions such
as varchar(N) to varchar(N+1).)
* Multiple ALTER actions in a single ALTER TABLE command. You can perform
any number of column additions, type changes, and constraint additions with
only one pass over the table contents.
Basic documentation provided in ALTER TABLE ref page, but some more docs
work is needed.
Original patch from Rod Taylor, additional work from Tom Lane.
o -Allow dump/load of CSV format
This adds new keywords to COPY and \copy:
CSV - enable CSV mode (comma separated variable)
QUOTE - specify quote character
ESCAPE - specify escape character
FORCE - force quoting of specified column
LITERAL - suppress null comparison for columns
Doc changes included. Regression updates coming from Andrew.
are sought first as local FROM columns, then as local SELECT-list aliases,
and finally as outer FROM columns; the former behavior made outer FROM
columns take precedence over aliases. This does not change spec
conformance because SQL99 allows only the first case anyway, and it seems
more useful and self-consistent. Per gripe from Dennis Bjorklund 2004-04-05.
results with tuples as ordinary varlena Datums. This commit does not
in itself do much for us, except eliminate the horrid memory leak
associated with evaluation of whole-row variables. However, it lays the
groundwork for allowing composite types as table columns, and perhaps
some other useful features as well. Per my proposal of a few days ago.
is measured in kilobytes and checked against actual physical execution
stack depth, as per my proposal of 30-Dec. This gives us a fairly
bulletproof defense against crashing due to runaway recursive functions.
so that the 'val' is computed only once, per recent discussion. The
speedup is not much when 'val' is just a simple variable, but could be
significant for larger expressions. More importantly this avoids issues
with multiple evaluations of a volatile 'val', and it allows the CASE
expression to be reverse-listed in its original form by ruleutils.c.
implemented casts to varchar and bpchar using a cast-to-text function.
This is a holdover from before we had pg_cast; it now makes more sense
to just list these casts in pg_cast. While at it, add pg_cast entries
for the other direction (casts from varchar/bpchar) where feasible.
is still lacking, as is support in plpgsql and other places, but this is
the basic feature. Patch by Andrew Dunstan, some tweaking by Tom Lane.
Also, enable %option nodefault in these two lexers, and patch some gaps
revealed thereby.
problem, per previous discussion. Make some additional changes to
centralize the knowledge of just how identifier downcasing is done,
in hopes of simplifying any future tweaking in this area.
unnecessary checks for complex grouping expressions: we cannot check
whether the expressions are simple Vars until after we apply
flatten_join_alias_vars, because in the case of FULL JOIN that routine
can introduce non-Var expressions. Per example from Joel Knight.
patch: a 3-value enum was mistakenly assigned directly to a 'bool'
in transformCreateStmt(). Along the way, change makeObjectName()
to be static, as it isn't used outside analyze.c
for sure...). Rather than relying on the query context of a rangetable
entry to identify what permissions it wants checked, store a full AclMode
mask in each RTE, and check exactly those bits. This allows an RTE
specifying, say, INSERT privilege on a view to be copied into a derived
UPDATE query without changing meaning. Per recent discussion thread.
initdb forced due to change of stored rule representation.
intended to allow application authors to insulate themselves from
changes to the default value of 'default_with_oids' in future releases
of PostgreSQL.
This patch also fixes a bug in the earlier implementation of the
'default_with_oids' GUC variable: code in gram.y should not examine
the value of GUC variables directly due to synchronization issues.
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
parameters to be declared with names. pg_proc has a column to store
names, and CREATE FUNCTION can insert data into it, but that's all as
yet. I need to do more work on the pg_dump and plpgsql portions of the
patch before committing those, but I thought I'd get the bulky changes
in before the tree drifts under me.
initdb forced due to pg_proc change.
does not affect UNKNOWN-type literals or Params. This fixes the recent
complaint about count('x') being broken, and improves consistency in
a few other respects too.
proposal for eventually deprecating OIDs on user tables that I posted
earlier to pgsql-hackers. pg_dump now always specifies WITH OIDS or
WITHOUT OIDS when dumping a table. The documentation has been updated.
Neil Conway
tree for CYCLE option; don't assume zeros are invalid values for sequence
fields other than increment_by; don't reset cache_value when not told to;
simplify code for testing whether to apply defaults.
large objects. Dump all these in pg_dump; also add code to pg_dump
user-defined conversions. Make psql's large object code rely on
the backend for inserting/deleting LOB comments, instead of trying to
hack pg_description directly. Documentation and regression tests added.
Christopher Kings-Lynne, code reviewed by Tom
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
regression=# select 1 from tenk1 ta cross join tenk1 tb for update;
ERROR: no relation entry for relid 3
7.3 said "SELECT FOR UPDATE cannot be applied to a join", which was better
but still wrong, considering that 7.2 took the query just fine. Fix by
making transformForUpdate() ignore JOIN and other special RTE types,
rather than trying to mark them FOR UPDATE. The actual error message now
only appears if you explicitly name the join in FOR UPDATE.
one side of a binary operator is probably supposed to be the same type
as the other operand' will be applied for domain types. This worked
in 7.3 but was broken in 7.4 due to code rearrangements. Mea culpa.
since 7.3: 'select array_dims(histogram_bounds) from pg_stats' used to
work and still should. Problem was that code wouldn't take input of
declared type anyarray as matching an anyarray argument. Allow this
case as long as we don't need to determine an element type (which in
practice means as long as anyelement isn't used in the function signature).
be anything yielding an array of the proper kind, not only sub-ARRAY[]
constructs; do subscript checking at runtime not parse time. Also,
adjust array_cat to make array || array comply with the SQL99 spec.
Joe Conway
datatype by array_eq and array_cmp; use this to solve problems with memory
leaks in array indexing support. The parser's equality_oper and ordering_oper
routines also use the cache. Change the operator search algorithms to look
for appropriate btree or hash index opclasses, instead of assuming operators
named '<' or '=' have the right semantics. (ORDER BY ASC/DESC now also look
at opclasses, instead of assuming '<' and '>' are the right things.) Add
several more index opclasses so that there is no regression in functionality
for base datatypes. initdb forced due to catalog additions.
target columns in INSERT and UPDATE targetlists. Don't rely on resname
to be accurate in ruleutils, either. This fixes bug reported by
Donald Fraser, in which renaming a column referenced in a rule did not
work very well.
yet, though). Avoid using nth() to fetch tlist entries; provide a
common routine get_tle_by_resno() to search a tlist for a particular
resno. This replaces a couple uses of nth() and a dozen hand-coded
search loops. Also, replace a few uses of nth(length-1, list) with
llast().
subplan it starts with, as they may be needed at upper join levels.
See comments added to code for the non-obvious reason why. Per bug report
from Robert Creager.
query node, since that won't work unless the planner is upgraded.
Someday we should try to support at least some cases of this, but for
now just plug the hole in the dike. Per discussion with Dmitry Tkach.
instead of the former kluge whereby gram.y emitted already-transformed
expressions. This is needed so that Params appearing in these clauses
actually work correctly. I suppose some might claim that the side effect
of 'SELECT ... LIMIT 2+2' working is a new feature, but I say this is
a bug fix.
It also works to create a non-polymorphic aggregate from polymorphic
functions, should you want to do that. Regression test added, docs still
lacking. By Joe Conway, with some kibitzing from Tom Lane.
'scalar op ALL (array)', where the operator is applied between the
lefthand scalar and each element of the array. The operator must
yield boolean; the result of the construct is the OR or AND of the
per-element results, respectively.
Original coding by Joe Conway, after an idea of Peter's. Rewritten
by Tom to keep the implementation strictly separate from subqueries.
comparison functions), replacing the highly bogus bitwise array_eq. Create
a btree index opclass for ANYARRAY --- it is now possible to create indexes
on array columns.
Arrange to cache the results of catalog lookups across multiple array
operations, instead of repeating the lookups on every call.
Add string_to_array and array_to_string functions.
Remove singleton_array, array_accum, array_assign, and array_subscript
functions, since these were for proof-of-concept and not intended to become
supported functions.
Minor adjustments to behavior in some corner cases with empty or
zero-dimensional arrays.
Joe Conway (with some editorializing by Tom Lane).
This is no longer necessary or appropriate since we don't use zero typeid
as a wildcard anymore, and it fixes a nasty performance problem with
functions with many parameters. Per recent example from Reuven Lerner.
The attached fixes select_common_type() to support the below case:
create table t1( c1 int);
create domain dom_c1 int;
create table t2(c1 dom_c1);
select * from t1 join t2 using( c1 );
I didn't see a need for maintaining the domain as the preferred type. A
simple getBaseType() call on all elements of the list seems to be
enough.
--
Rod Taylor <rbt@rbt.ca>
- LIKE <subtable> [ INCLUDING DEFAULTS | EXCLUDING DEFAULTS ]
- Quick cleanup of analyze.c function prototypes.
- New non-reserved keywords (INCLUDING, EXCLUDING, DEFAULTS), SQL 200X
Opted not to extend for check constraints at this time.
As per the definition that it's user defined columns, OIDs are NOT
inherited.
Doc and Source patches attached.
--
Rod Taylor <rbt@rbt.ca>
character in identifiers. The first change eliminates the current need
to put spaces around parameter references, as in "x<=$2". The second
change improves compatibility with Oracle and some other RDBMSes. This
was discussed and agreed to back in January, but did not get done.
silently resolving them to type TEXT. This is comparable to what we
do when faced with UNKNOWN in CASE, UNION, and other contexts. It gets
rid of this and related annoyances:
select distinct f1, '' from int4_tbl;
ERROR: Unable to identify an ordering operator '<' for type unknown
This was discussed many moons ago, but no one got round to fixing it.
both clauses specify the same targets, rather than always using the
default ordering operator. This allows 'GROUP BY foo ORDER BY foo DESC'
to be done with only one sort step.
extensions to support our historical behavior. An aggregate belongs
to the closest query level of any of the variables in its argument,
or the current query level if there are no variables (e.g., COUNT(*)).
The implementation involves adding an agglevelsup field to Aggref,
and treating outer aggregates like outer variables at planning time.
yy_fatal_error() call results in elog(ERROR) not exit(). This was
already fixed in the main lexer and plpgsql, but extend same technique
to all the other dot-l files. Also, on review of the possible calls
to yy_fatal_error(), it seems safe to use elog(ERROR) not elog(FATAL).
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
blanks, in hopes of reducing the surprise factor for newbies. Remove
redundant operators for VARCHAR (it depends wholly on TEXT operations now).
Clean up resolution of ambiguous operators/functions to avoid surprising
choices for domains: domains are treated as equivalent to their base types
and binary-coercibility is no longer considered a preference item when
choosing among multiple operators/functions. IsBinaryCoercible now correctly
reflects the notion that you need *only* relabel the type to get from type
A to type B: that is, a domain is binary-coercible to its base type, but
not vice versa. Various marginal cleanup, including merging the essentially
duplicate resolution code in parse_func.c and parse_oper.c. Improve opr_sanity
regression test to understand about binary compatibility (using pg_cast),
and fix a couple of small errors in the catalogs revealed thereby.
Restructure "special operator" handling to fetch operators via index opclasses
rather than hardwiring assumptions about names (cleans up the pattern_ops
stuff a little).
Win32 port is now called 'win32' rather than 'win'
add -lwsock32 on Win32
make gethostname() be only used when kerberos4 is enabled
use /port/getopt.c
new /port/opendir.c routines
disable GUC unix_socket_group on Win32
convert some keywords.c symbols to KEYWORD_P to prevent conflict
create new FCNTL_NONBLOCK macro to turn off socket blocking
create new /include/port.h file that has /port prototypes, move
out of c.h
new /include/port/win32_include dir to hold missing include files
work around ERROR being defined in Win32 includes
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
implementation limits, do not issue an ERROR; instead issue a NOTICE and use
the max supported value. Per pgsql-general discussion of 28-Apr, this is
needed to allow easy porting from pre-7.3 releases where the limits were
higher.
Unrelated change in same area: accept GLOBAL TEMP/TEMPORARY as a synonym
for TEMPORARY, as per pgsql-hackers discussion of 15-Apr. We previously
rejected it, but that was based on a misreading of the spec --- SQL92's
GLOBAL temp tables are really closer to what we have than their LOCAL ones.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
that the types of untyped string-literal constants are deduced (ie,
when coerce_type is applied to 'em, that's what the type must be).
Remove the ancient hack of storing the input Param-types array as a
global variable, and put the info into ParseState instead. This touches
a lot of files because of adjustment of routine parameter lists, but
it's really not a large patch. Note: PREPARE statement still insists on
exact specification of parameter types, but that could easily be relaxed
now, if we wanted to do so.
I had inadvertently omitted it while rearranging things to support
length-counted incoming messages. Also, change the parser's API back
to accepting a 'char *' query string instead of 'StringInfo', as the
latter wasn't buying us anything except overhead. (I think when I put
it in I had some notion of making the parser API 8-bit-clean, but
seeing that flex depends on null-terminated input, that's not really
ever gonna happen.)
rewritten and the protocol is changed, but most elog calls are still
elog calls. Also, we need to contemplate mechanisms for controlling
all this functionality --- eg, how much stuff should appear in the
postmaster log? And what API should libpq expose for it?
expressions, ARRAY(sub-SELECT) expressions, some array functions.
Polymorphic functions using ANYARRAY/ANYELEMENT argument and return
types. Some regression tests in place, documentation is lacking.
Joe Conway, with some kibitzing from Tom Lane.
(materialization into a tuple store) discussed on pgsql-hackers earlier.
I've updated the documentation and the regression tests.
Notes on the implementation:
- I needed to change the tuple store API slightly -- it assumes that it
won't be used to hold data across transaction boundaries, so the temp
files that it uses for on-disk storage are automatically reclaimed at
end-of-transaction. I added a flag to tuplestore_begin_heap() to control
this behavior. Is changing the tuple store API in this fashion OK?
- in order to store executor results in a tuple store, I added a new
CommandDest. This works well for the most part, with one exception: the
current DestFunction API doesn't provide enough information to allow the
Executor to store results into an arbitrary tuple store (where the
particular tuple store to use is chosen by the call site of
ExecutorRun). To workaround this, I've temporarily hacked up a solution
that works, but is not ideal: since the receiveTuple DestFunction is
passed the portal name, we can use that to lookup the Portal data
structure for the cursor and then use that to get at the tuple store the
Portal is using. This unnecessarily ties the Portal code with the
tupleReceiver code, but it works...
The proper fix for this is probably to change the DestFunction API --
Tom suggested passing the full QueryDesc to the receiveTuple function.
In that case, callers of ExecutorRun could "subclass" QueryDesc to add
any additional fields that their particular CommandDest needed to get
access to. This approach would work, but I'd like to think about it for
a little bit longer before deciding which route to go. In the mean time,
the code works fine, so I don't think a fix is urgent.
- (semi-related) I added a NO SCROLL keyword to DECLARE CURSOR, and
adjusted the behavior of SCROLL in accordance with the discussion on
-hackers.
- (unrelated) Cleaned up some SGML markup in sql.sgml, copy.sgml
Neil Conway
refers to a non-DISTINCT output column of a DISTINCT ON subquery, or
if it refers to a function-returning-set, we cannot push it down.
But the old implementation refused to push down *any* quals if the
subquery had any such 'dangerous' outputs. Now we just look at the
output columns actually referenced by each qual expression. More code
than before, but probably no slower since we don't make unnecessary checks.
Add ALTER SEQUENCE to modify min/max/increment/cache/cycle values
Also updated create sequence docs to mention NO MINVALUE, & NO MAXVALUE.
New Files:
doc/src/sgml/ref/alter_sequence.sgml
src/test/regress/expected/sequence.out
src/test/regress/sql/sequence.sql
ALTER SEQUENCE is NOT transactional. It behaves similarly to setval().
It matches the proposed SQL200N spec, as well as Oracle in most ways --
Oracle lacks RESTART WITH for some strange reason.
--
Rod Taylor <rbt@rbt.ca>
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
RelOid_pg_class, and transaction locks XactLockTableId. RelId is renamed
to objId.
- LockObject() and UnlockObject() functions created, and their use
sprinkled throughout the code to do descent locking for domains and
types. They accept lock modes AccessShare and AccessExclusive, as we
only really need a 'read' and 'write' lock at the moment. Most locking
cases are held until the end of the transaction.
This fixes the cases Tom mentioned earlier in regards to locking with
Domains. If the patch is good, I'll work on cleaning up issues with
other database objects that have this problem (most of them).
Rod Taylor
of the containing query (which really can only happen in a rule context).
Per example from Brandon Craig Rhodes. Also, make the error message
more specific for the similar case with sub-select in FROM. The revised
coding should be easier to adapt to SQL99's LATERAL(), when we get around
to supporting that.
from Greg Stark. Also, twiddle the FuncCall case to not scribble on
the input structure, which was the proximate cause of the problem.
Someday we ought to fix things so that transformExpr() isn't called
on already-transformed trees ...
> =================================================================
> User interface proposal for multi-row function targetlist entries
> =================================================================
> 1. Only one targetlist entry may return a set.
> 2. Each targetlist item (other than the set returning one) is
> repeated for each item in the returned set.
>
Having gotten no objections (actually, no response at all), I can only
assume no one had heartburn with this change. The attached patch covers
the first of the two proposals, i.e. restricting the target list to only
one set returning function.
Joe Conway
spec, which will also make alter sequence a touch easier.
sequence.c init_params() will check for settings which have been
defined twice, and complain.
Rod Taylor
On Wed, 2003-01-08 at 21:59, Christopher Kings-Lynne wrote:
> I agree. I want to remove OIDs from heaps of our tables when we go to 7.3.
> I'd rather not have to do it in the dump due to down time.
Rod Taylor <rbt@rbt.ca>
> User interface proposal for multi-row function targetlist entries
> =================================================================
> 1. Only one targetlist entry may return a set.
> 2. Each targetlist item (other than the set returning one) is
> repeated for each item in the returned set.
>
Having gotten no objections (actually, no response at all), I can only assume
no one had heartburn with this change. The attached patch covers the first of
the two proposals, i.e. restricting the target list to only one set returning
function.
It compiles cleanly, and passes all regression tests. If there are no
objections, please apply.
Any suggestions on where this should be documented (other than maybe sql-select)?
Thanks,
Joe
p.s. Here's what the previous example now looks like:
CREATE TABLE bar(f1 int, f2 text, f3 int);
INSERT INTO bar VALUES(1, 'Hello', 42);
INSERT INTO bar VALUES(2, 'Happy', 45);
CREATE TABLE foo(a int, b text);
INSERT INTO foo VALUES(42, 'World');
INSERT INTO foo VALUES(42, 'Everyone');
INSERT INTO foo VALUES(45, 'Birthday');
INSERT INTO foo VALUES(45, 'New Year');
CREATE TABLE foo2(a int, b text);
INSERT INTO foo2 VALUES(42, '!!!!');
INSERT INTO foo2 VALUES(42, '????');
INSERT INTO foo2 VALUES(42, '####');
INSERT INTO foo2 VALUES(45, '$$$$');
CREATE OR REPLACE FUNCTION getfoo(int) RETURNS SETOF text AS '
SELECT b FROM foo WHERE a = $1
' language 'sql';
CREATE OR REPLACE FUNCTION getfoo2(int) RETURNS SETOF text AS '
SELECT b FROM foo2 WHERE a = $1
' language 'sql';
regression=# SELECT f1, f2, getfoo(f3) AS f4 FROM bar;
f1 | f2 | f4
----+-------+----------
1 | Hello | World
1 | Hello | Everyone
2 | Happy | Birthday
2 | Happy | New Year
(4 rows)
regression=# SELECT f1, f2, getfoo(f3) AS f4, getfoo2(f3) AS f5 FROM bar;
ERROR: Only one target list entry may return a set result
Joe Conway
targetlist of a set-operation tree. I'm not sure that this solution
will really stand the test of time --- perhaps we need to make a special
RTE for such vars to refer to. But this quick hack fixes Brandon Craig
Rhodes' complaint of 10-Feb-02 about EXCEPT in CREATE RULE, while not
changing any behavior in the better-tested cases where leftmostRTI is
one anyway.
codes, per discussion from last March. parse.h should now be included
*only* by gram.y, scan.l, keywords.c, parser.c. This prevents surprising
misbehavior after seemingly-trivial grammar adjustments.
rid of the assumption that sizeof(Oid)==sizeof(int). This is one small
step towards someday supporting 8-byte OIDs. For the moment, it doesn't
do much except get rid of a lot of unsightly casts.
startup, not in the parser; this allows ALTER DOMAIN to work correctly
with domain constraint operations stored in rules. Rod Taylor;
code review by Tom Lane.
bison 1.875 and later as we did from earlier bison releases. Eventually
we will probably want to adopt the newer message spelling ... but not yet.
Per recent discussion on pgpatches.
Note: I didn't change the build rules for bootstrap, ecpg, or plpgsql
grammars, since these do not affect regression test results.
that used to do it in planner. That was an ancient kluge that was
never satisfactory; errors should be detected at parse time when possible.
But at the time we didn't have the support mechanism (expression_tree_walker
et al) to make it convenient to do in the parser.
Simplify SubLink by storing just a List of operator OIDs, instead of
a list of incomplete OpExprs --- that was a bizarre and bulky choice,
with no redeeming social value since we have to build new OpExprs
anyway when forming the plan tree.
'NOT (x IN (subselect))', that is 'NOT (x = ANY (subselect))',
rather than 'x <> ALL (subselect)' as we formerly did. This
opens the door to optimizing NOT IN the same way as IN, whereas
there's no hope of optimizing the expression using <>. Also,
convert 'x <> ALL (subselect)' to the NOT(IN) style, so that
the optimization will be available when processing rules dumped
by older Postgres versions.
initdb forced due to small change in SubLink node representation.
columns in DefineIndex. So, ALTER TABLE ... PRIMARY KEY will now
automatically add the NOT NULL constraint. It appeared the alter_table
regression test wanted this to occur, as after the change the regression
test better matched in inline 'fails'/'succeeds' comments.
Rod Taylor
beginning/end of cursor.
Have MOVE return 0/1 depending on cursor position.
Matches SQL spec.
Pass cursor counter from parser as a long rather than int.
Doc updates.
disallowed by CREATE TABLE (eg, pseudo-types); also disallow these types
from being introduced by the range-function syntax. While at it, allow
CREATE TABLE to create zero-column tables, per recent pghackers discussion.
I am back-patching this into 7.3 since failure to disallow pseudo-types
is arguably a security hole.
execution state trees, and ExecEvalExpr takes an expression state tree
not an expression plan tree. The plan tree is now read-only as far as
the executor is concerned. Next step is to begin actually exploiting
this property.
make VALUE a non-reserved word again, use less invasive method of passing
ConstraintTestValue into transformExpr, fix problems with nested constraint
testing, do correct thing with NULL result from a constraint expression,
remove memory leak. Domain checks still need much more work if we are going
to allow ALTER DOMAIN, however.
so that all executable expression nodes inherit from a common supertype
Expr. This is somewhat of an exercise in code purity rather than any
real functional advance, but getting rid of the extra Oper or Func node
formerly used in each operator or function call should provide at least
a little space and speed improvement.
initdb forced by changes in stored-rules representation.
logic, dissuade planner from thinking that 'x IS DISTINCT FROM 42' may
be optimized into 'x = 42' (!!), cause dependency on = operator to be
recorded correctly, minor other improvements.
operations: make sure we use operators that are compatible, as determined
by a mergejoin link in pg_operator. Also, add code to planner to ensure
we don't try to use hashed grouping when the grouping operators aren't
marked hashable.
sublink results and COPY's domain constraint checking. A Const that
isn't really constant is just a Bad Idea(tm). Remove hacks in
parse_coerce and other places that were needed because of the former
klugery.
-hackers a couple days ago.
Notes/caveats:
- added regression tests for the new functionality, all
regression tests pass on my machine
- added pg_dump support
- updated PL/PgSQL to support per-statement triggers; didn't
look at the other procedural languages.
- there's (even) more code duplication in trigger.c than there
was previously. Any suggestions on how to refactor the
ExecXXXTriggers() functions to reuse more code would be
welcome -- I took a brief look at it, but couldn't see an
easy way to do it (there are several subtly-different
versions of the code in question)
- updated the documentation. I also took the liberty of
removing a big chunk of duplicated syntax documentation in
the Programmer's Guide on triggers, and moving that
information to the CREATE TRIGGER reference page.
- I also included some spelling fixes and similar small
cleanups I noticed while making the changes. If you'd like
me to split those into a separate patch, let me know.
Neil Conway
- CLUSTER ALL clusters all the tables that have some index with
indisclustered set and the calling user owns.
- CLUSTER tablename clusters the named table, using the index with
indisclustered set. If no index has the bit set, throws elog(ERROR).
- The multi-relation version (CLUSTER ALL) uses a multitransaction
approach, similar to what VACUUM does.
Alvaro Herrera
before commit, not after :-( --- the original coding is not only unsafe
if an error occurs while it's processing, but it generates an invalid
sequence of WAL entries. Resurrect 7.2 logic for deleting items when
no longer needed. Use an enum instead of random macros. Editorialize
on names used for routines and constants. Teach backend/nodes routines
about new field in CreateTable struct. Add a regression test.
where it's safe to do database access. Along the way, fix core dump
for 'DEFAULT' parameters to CREATE DATABASE. initdb forced due to
change in pg_proc entry.
(usually bison output files), not as standalone files. This hack
works around flex's insistence on including <stdio.h> before we are
able to include postgres.h; postgres.h will already be read before
the compiler starts to read the flex output file. Needed for largefile
support on some platforms.
coercions, not implicit ones. For example, 'select abstime(1035497293)'
should succeed because there is an explicit binary coercion from int4
to abstime.
the SQL99 standard. (I'm not sure that the character-class features are
quite right, but that can be fixed later.) Document SQL99 and POSIX
regexps as being different features; provide variants of SUBSTRING for
each.
parse analysis and into the execution code (in tablecmds.c). This
eliminates a lot of unreasonably complex code that needed to have two
or more execution paths in case it was dealing with a not-yet-created
table column vs. an already-existing one. The execution code is always
dealing with already-created tables and so needs only one case. This
also eliminates some potential race conditions (the table wasn't locked
between parse analysis and execution), makes it easy to fix the gripe
about wrong referenced-column names generating a misleading error message,
and lets us easily add a dependency from the foreign-key constraint to
the unique index that it requires the referenced table to have. (Cf.
complaint from Kris Jurka 12-Sep-2002 on pgsql-bugs.)
Also, third try at building a deletion mechanism that is not sensitive
to the order in which pg_depend entries are visited. Adding the above-
mentioned dependency exposed the folly of what dependency.c had been
doing: it failed for cases where B depends on C while both auto-depend
on A. Dropping A should succeed in this case, but was failing if C
happened to be visited before B. It appears the only solution is two
separate walks over the dependency tree.
to be flexible about assignment casts without introducing ambiguity in
operator/function resolution. Introduce a well-defined promotion hierarchy
for numeric datatypes (int2->int4->int8->numeric->float4->float8).
Change make_const to initially label numeric literals as int4, int8, or
numeric (never float8 anymore).
Explicitly mark Func and RelabelType nodes to indicate whether they came
from a function call, explicit cast, or implicit cast; use this to do
reverse-listing more accurately and without so many heuristics.
Explicit casts to char, varchar, bit, varbit will truncate or pad without
raising an error (the pre-7.2 behavior), while assigning to a column without
any explicit cast will still raise an error for wrong-length data like 7.3.
This more nearly follows the SQL spec than 7.2 behavior (we should be
reporting a 'completion condition' in the explicit-cast cases, but we have
no mechanism for that, so just do silent truncation).
Fix some problems with enforcement of typmod for array elements;
it didn't work at all in 'UPDATE ... SET array[n] = foo', for example.
Provide a generalized array_length_coerce() function to replace the
specialized per-array-type functions that used to be needed (and were
missing for NUMERIC as well as all the datetime types).
Add missing conversions int8<->float4, text<->numeric, oid<->int8.
initdb forced.
already fixed by You. However there were a few left and attached patch
should fix the rest of them.
I used StringInfo only in 2 places and both of them are inside debug
ifdefs. Only performance penalty will come from using strlen() like all
the other code does.
I also modified some of the already patched parts by changing
snprintf(buf, 2 * BUFSIZE, ... style lines to
snprintf(buf, sizeof(buf), ... where buf is an array.
Jukka Holappa
type for runtime constraint checks, instead of misusing the parse-time
Constraint node for the purpose. Fix some damage introduced into type
coercion logic; in particular ensure that a coerced expression tree will
read out the correct result type when inspected (patch had broken some
RelabelType cases). Enforce domain NOT NULL constraints against columns
that are omitted from an INSERT.
should be pretty safe in practice, but it's probably better to be safe
than sorry.
I was actually looking for cases where NAMEDATALEN is assumed to be
32, but only found one. That's fixed too, as well as a few bits of
code cleanup.
Neil Conway
Tom Lane
Bruce Momjian
Neil Conway
Andrew Dunstan
Peter Eisentraut
Alvaro Herrera
Tatsuo Ishii
PostgreSQL Daemon
Dennis Bjorklund